Index: ext/sqlite3/shell.c =================================================================== diff -u -r5e4863063b087416abc0263bee46243d1162c7d8 -r9385e0380e81d2423e5131455fe275f66f473690 --- ext/sqlite3/shell.c (.../shell.c) (revision 5e4863063b087416abc0263bee46243d1162c7d8) +++ ext/sqlite3/shell.c (.../shell.c) (revision 9385e0380e81d2423e5131455fe275f66f473690) @@ -668,11 +668,12 @@ #define MODE_Semi 3 /* Same as MODE_List but append ";" to each line */ #define MODE_Html 4 /* Generate an XHTML table */ #define MODE_Insert 5 /* Generate SQL "insert" statements */ -#define MODE_Tcl 6 /* Generate ANSI-C or TCL quoted elements */ -#define MODE_Csv 7 /* Quote strings, numbers are plain */ -#define MODE_Explain 8 /* Like MODE_Column, but do not truncate data */ -#define MODE_Ascii 9 /* Use ASCII unit and record separators (0x1F/0x1E) */ -#define MODE_Pretty 10 /* Pretty-print schemas */ +#define MODE_Quote 6 /* Quote values as for SQL */ +#define MODE_Tcl 7 /* Generate ANSI-C or TCL quoted elements */ +#define MODE_Csv 8 /* Quote strings, numbers are plain */ +#define MODE_Explain 9 /* Like MODE_Column, but do not truncate data */ +#define MODE_Ascii 10 /* Use ASCII unit and record separators (0x1F/0x1E) */ +#define MODE_Pretty 11 /* Pretty-print schemas */ static const char *modeDescr[] = { "line", @@ -681,6 +682,7 @@ "semi", "html", "insert", + "quote", "tcl", "csv", "explain", @@ -944,6 +946,25 @@ } #endif +/* +** Print a schema statement. Part of MODE_Semi and MODE_Pretty output. +** +** This routine converts some CREATE TABLE statements for shadow tables +** in FTS3/4/5 into CREATE TABLE IF NOT EXISTS statements. +*/ +static void printSchemaLine(FILE *out, const char *z, const char *zTail){ + if( sqlite3_strglob("CREATE TABLE ['\"]*", z)==0 ){ + utf8_printf(out, "CREATE TABLE IF NOT EXISTS %s%s", z+13, zTail); + }else{ + utf8_printf(out, "%s%s", z, zTail); + } +} +static void printSchemaLineN(FILE *out, char *z, int n, const char *zTail){ + char c = z[n]; + z[n] = 0; + printSchemaLine(out, z, zTail); + z[n] = c; +} /* ** This is the callback routine that the shell @@ -1062,7 +1083,7 @@ break; } case MODE_Semi: { /* .schema and .fullschema output */ - utf8_printf(p->out, "%s;\n", azArg[0]); + printSchemaLine(p->out, azArg[0], ";\n"); break; } case MODE_Pretty: { /* .schema and .fullschema with --indent */ @@ -1106,22 +1127,22 @@ }else if( c==')' ){ nParen--; if( nLine>0 && nParen==0 && j>0 ){ - utf8_printf(p->out, "%.*s\n", j, z); + printSchemaLineN(p->out, z, j, "\n"); j = 0; } } z[j++] = c; if( nParen==1 && (c=='(' || c==',' || c=='\n') ){ if( c=='\n' ) j--; - utf8_printf(p->out, "%.*s\n ", j, z); + printSchemaLineN(p->out, z, j, "\n "); j = 0; nLine++; while( IsSpace(z[i+1]) ){ i++; } } } z[j] = 0; } - utf8_printf(p->out, "%s;\n", z); + printSchemaLine(p->out, z, ";\n"); sqlite3_free(z); break; } @@ -1198,19 +1219,28 @@ setTextMode(p->out, 1); break; } + case MODE_Quote: case MODE_Insert: { - p->cnt++; if( azArg==0 ) break; - utf8_printf(p->out,"INSERT INTO %s",p->zDestTable); - if( p->showHeader ){ - raw_printf(p->out,"("); + if( p->cMode==MODE_Insert ){ + utf8_printf(p->out,"INSERT INTO %s",p->zDestTable); + if( p->showHeader ){ + raw_printf(p->out,"("); + for(i=0; i0 ? ",": ""; + utf8_printf(p->out, "%s%s", zSep, azCol[i]); + } + raw_printf(p->out,")"); + } + raw_printf(p->out," VALUES("); + }else if( p->cnt==0 && p->showHeader ){ for(i=0; i0 ? ",": ""; - utf8_printf(p->out, "%s%s", zSep, azCol[i]); + if( i>0 ) raw_printf(p->out, ","); + output_quoted_string(p->out, azCol[i]); } - raw_printf(p->out,")"); + raw_printf(p->out,"\n"); } - raw_printf(p->out," VALUES("); + p->cnt++; for(i=0; i0 ? ",": ""; if( (azArg[i]==0) || (aiType && aiType[i]==SQLITE_NULL) ){ @@ -1233,7 +1263,7 @@ output_quoted_string(p->out, azArg[i]); } } - raw_printf(p->out,");\n"); + raw_printf(p->out,p->cMode==MODE_Quote?"\n":");\n"); break; } case MODE_Ascii: { @@ -1896,6 +1926,7 @@ continue; } zStmtSql = sqlite3_sql(pStmt); + if( zStmtSql==0 ) zStmtSql = ""; while( IsSpace(zStmtSql[0]) ) zStmtSql++; /* save off the prepared statment handle and reset row count */ @@ -2034,7 +2065,7 @@ sqlite3_free(zIns); return 0; }else{ - utf8_printf(p->out, "%s;\n", zSql); + printSchemaLine(p->out, zSql, ";\n"); } if( strcmp(zType, "table")==0 ){ @@ -2158,13 +2189,18 @@ ".headers on|off Turn display of headers on or off\n" ".help Show this message\n" ".import FILE TABLE Import data from FILE into TABLE\n" +#ifndef SQLITE_OMIT_TEST_CONTROL + ".imposter INDEX TABLE Create imposter table TABLE on index INDEX\n" +#endif ".indexes ?TABLE? Show names of all indexes\n" " If TABLE specified, only show indexes for tables\n" " matching LIKE pattern TABLE.\n" #ifdef SQLITE_ENABLE_IOTRACE ".iotrace FILE Enable I/O diagnostic logging to FILE\n" #endif ".limit ?LIMIT? ?VAL? Display or change the value of an SQLITE_LIMIT\n" + ".lint OPTIONS Report potential schema issues. Options:\n" + " fkey-indexes Find missing foreign key indexes\n" #ifndef SQLITE_OMIT_LOAD_EXTENSION ".load FILE ?ENTRY? Load an extension library\n" #endif @@ -2177,6 +2213,7 @@ " insert SQL insert statements for TABLE\n" " line One value per line\n" " list Values delimited by .separator strings\n" + " quote Escape answers as for SQL\n" " tabs Tab-separated values\n" " tcl TCL list elements\n" ".nullvalue STRING Use STRING in place of NULL values\n" @@ -2243,14 +2280,22 @@ /* Forward reference */ static int process_input(ShellState *p, FILE *in); - /* -** Read the content of a file into memory obtained from sqlite3_malloc64(). -** The caller is responsible for freeing the memory. +** Read the content of file zName into memory obtained from sqlite3_malloc64() +** and return a pointer to the buffer. The caller is responsible for freeing +** the memory. ** -** NULL is returned if any error is encountered. +** If parameter pnByte is not NULL, (*pnByte) is set to the number of bytes +** read. +** +** For convenience, a nul-terminator byte is always appended to the data read +** from the file before the buffer is returned. This byte is not included in +** the final value of (*pnByte), if applicable. +** +** NULL is returned if any error is encountered. The final value of *pnByte +** is undefined in this case. */ -static char *readFile(const char *zName){ +static char *readFile(const char *zName, int *pnByte){ FILE *in = fopen(zName, "rb"); long nIn; size_t nRead; @@ -2268,6 +2313,7 @@ return 0; } pBuf[nIn] = 0; + if( pnByte ) *pnByte = nIn; return pBuf; } @@ -2283,12 +2329,13 @@ ){ const char *zName; void *pBuf; + int nBuf; UNUSED_PARAMETER(argc); zName = (const char*)sqlite3_value_text(argv[0]); if( zName==0 ) return; - pBuf = readFile(zName); - if( pBuf ) sqlite3_result_blob(context, pBuf, -1, sqlite3_free); + pBuf = readFile(zName, &nBuf); + if( pBuf ) sqlite3_result_blob(context, pBuf, nBuf, sqlite3_free); } /* @@ -2567,6 +2614,8 @@ return f; } +#if !defined(SQLITE_UNTESTABLE) +#if !defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_OMIT_FLOATING_POINT) /* ** A routine for handling output from sqlite3_trace(). */ @@ -2587,6 +2636,8 @@ } return 0; } +#endif +#endif /* ** A no-op routine that runs with the ".breakpoint" doc-command. This is @@ -3214,7 +3265,254 @@ return rc; } + /* +** The implementation of SQL scalar function fkey_collate_clause(), used +** by the ".lint fkey-indexes" command. This scalar function is always +** called with four arguments - the parent table name, the parent column name, +** the child table name and the child column name. +** +** fkey_collate_clause('parent-tab', 'parent-col', 'child-tab', 'child-col') +** +** If either of the named tables or columns do not exist, this function +** returns an empty string. An empty string is also returned if both tables +** and columns exist but have the same default collation sequence. Or, +** if both exist but the default collation sequences are different, this +** function returns the string " COLLATE ", where +** is the default collation sequence of the parent column. +*/ +static void shellFkeyCollateClause( + sqlite3_context *pCtx, + int nVal, + sqlite3_value **apVal +){ + sqlite3 *db = sqlite3_context_db_handle(pCtx); + const char *zParent; + const char *zParentCol; + const char *zParentSeq; + const char *zChild; + const char *zChildCol; + const char *zChildSeq = 0; /* Initialize to avoid false-positive warning */ + int rc; + + assert( nVal==4 ); + zParent = (const char*)sqlite3_value_text(apVal[0]); + zParentCol = (const char*)sqlite3_value_text(apVal[1]); + zChild = (const char*)sqlite3_value_text(apVal[2]); + zChildCol = (const char*)sqlite3_value_text(apVal[3]); + + sqlite3_result_text(pCtx, "", -1, SQLITE_STATIC); + rc = sqlite3_table_column_metadata( + db, "main", zParent, zParentCol, 0, &zParentSeq, 0, 0, 0 + ); + if( rc==SQLITE_OK ){ + rc = sqlite3_table_column_metadata( + db, "main", zChild, zChildCol, 0, &zChildSeq, 0, 0, 0 + ); + } + + if( rc==SQLITE_OK && sqlite3_stricmp(zParentSeq, zChildSeq) ){ + char *z = sqlite3_mprintf(" COLLATE %s", zParentSeq); + sqlite3_result_text(pCtx, z, -1, SQLITE_TRANSIENT); + sqlite3_free(z); + } +} + + +/* +** The implementation of dot-command ".lint fkey-indexes". +*/ +static int lintFkeyIndexes( + ShellState *pState, /* Current shell tool state */ + char **azArg, /* Array of arguments passed to dot command */ + int nArg /* Number of entries in azArg[] */ +){ + sqlite3 *db = pState->db; /* Database handle to query "main" db of */ + FILE *out = pState->out; /* Stream to write non-error output to */ + int bVerbose = 0; /* If -verbose is present */ + int bGroupByParent = 0; /* If -groupbyparent is present */ + int i; /* To iterate through azArg[] */ + const char *zIndent = ""; /* How much to indent CREATE INDEX by */ + int rc; /* Return code */ + sqlite3_stmt *pSql = 0; /* Compiled version of SQL statement below */ + + /* + ** This SELECT statement returns one row for each foreign key constraint + ** in the schema of the main database. The column values are: + ** + ** 0. The text of an SQL statement similar to: + ** + ** "EXPLAIN QUERY PLAN SELECT rowid FROM child_table WHERE child_key=?" + ** + ** This is the same SELECT that the foreign keys implementation needs + ** to run internally on child tables. If there is an index that can + ** be used to optimize this query, then it can also be used by the FK + ** implementation to optimize DELETE or UPDATE statements on the parent + ** table. + ** + ** 1. A GLOB pattern suitable for sqlite3_strglob(). If the plan output by + ** the EXPLAIN QUERY PLAN command matches this pattern, then the schema + ** contains an index that can be used to optimize the query. + ** + ** 2. Human readable text that describes the child table and columns. e.g. + ** + ** "child_table(child_key1, child_key2)" + ** + ** 3. Human readable text that describes the parent table and columns. e.g. + ** + ** "parent_table(parent_key1, parent_key2)" + ** + ** 4. A full CREATE INDEX statement for an index that could be used to + ** optimize DELETE or UPDATE statements on the parent table. e.g. + ** + ** "CREATE INDEX child_table_child_key ON child_table(child_key)" + ** + ** 5. The name of the parent table. + ** + ** These six values are used by the C logic below to generate the report. + */ + const char *zSql = + "SELECT " + " 'EXPLAIN QUERY PLAN SELECT rowid FROM ' || quote(s.name) || ' WHERE '" + " || group_concat(quote(s.name) || '.' || quote(f.[from]) || '=?' " + " || fkey_collate_clause(f.[table], f.[to], s.name, f.[from]),' AND ')" + ", " + " 'SEARCH TABLE ' || s.name || ' USING COVERING INDEX*('" + " || group_concat('*=?', ' AND ') || ')'" + ", " + " s.name || '(' || group_concat(f.[from], ', ') || ')'" + ", " + " f.[table] || '(' || group_concat(COALESCE(f.[to], " + " (SELECT name FROM pragma_table_info(f.[table]) WHERE pk=seq+1)" + " )) || ')'" + ", " + " 'CREATE INDEX ' || quote(s.name ||'_'|| group_concat(f.[from], '_'))" + " || ' ON ' || quote(s.name) || '('" + " || group_concat(quote(f.[from]) ||" + " fkey_collate_clause(f.[table], f.[to], s.name, f.[from]), ', ')" + " || ');'" + ", " + " f.[table] " + + "FROM sqlite_master AS s, pragma_foreign_key_list(s.name) AS f " + "GROUP BY s.name, f.id " + "ORDER BY (CASE WHEN ? THEN f.[table] ELSE s.name END)" + ; + + for(i=2; i1 && sqlite3_strnicmp("-verbose", azArg[i], n)==0 ){ + bVerbose = 1; + } + else if( n>1 && sqlite3_strnicmp("-groupbyparent", azArg[i], n)==0 ){ + bGroupByParent = 1; + zIndent = " "; + } + else{ + raw_printf(stderr, "Usage: %s %s ?-verbose? ?-groupbyparent?\n", + azArg[0], azArg[1] + ); + return SQLITE_ERROR; + } + } + + /* Register the fkey_collate_clause() SQL function */ + rc = sqlite3_create_function(db, "fkey_collate_clause", 4, SQLITE_UTF8, + 0, shellFkeyCollateClause, 0, 0 + ); + + + if( rc==SQLITE_OK ){ + rc = sqlite3_prepare_v2(db, zSql, -1, &pSql, 0); + } + if( rc==SQLITE_OK ){ + sqlite3_bind_int(pSql, 1, bGroupByParent); + } + + if( rc==SQLITE_OK ){ + int rc2; + char *zPrev = 0; + while( SQLITE_ROW==sqlite3_step(pSql) ){ + int res = -1; + sqlite3_stmt *pExplain = 0; + const char *zEQP = (const char*)sqlite3_column_text(pSql, 0); + const char *zGlob = (const char*)sqlite3_column_text(pSql, 1); + const char *zFrom = (const char*)sqlite3_column_text(pSql, 2); + const char *zTarget = (const char*)sqlite3_column_text(pSql, 3); + const char *zCI = (const char*)sqlite3_column_text(pSql, 4); + const char *zParent = (const char*)sqlite3_column_text(pSql, 5); + + rc = sqlite3_prepare_v2(db, zEQP, -1, &pExplain, 0); + if( rc!=SQLITE_OK ) break; + if( SQLITE_ROW==sqlite3_step(pExplain) ){ + const char *zPlan = (const char*)sqlite3_column_text(pExplain, 3); + res = (0==sqlite3_strglob(zGlob, zPlan)); + } + rc = sqlite3_finalize(pExplain); + if( rc!=SQLITE_OK ) break; + + if( res<0 ){ + raw_printf(stderr, "Error: internal error"); + break; + }else{ + if( bGroupByParent + && (bVerbose || res==0) + && (zPrev==0 || sqlite3_stricmp(zParent, zPrev)) + ){ + raw_printf(out, "-- Parent table %s\n", zParent); + sqlite3_free(zPrev); + zPrev = sqlite3_mprintf("%s", zParent); + } + + if( res==0 ){ + raw_printf(out, "%s%s --> %s\n", zIndent, zCI, zTarget); + }else if( bVerbose ){ + raw_printf(out, "%s/* no extra indexes required for %s -> %s */\n", + zIndent, zFrom, zTarget + ); + } + } + } + sqlite3_free(zPrev); + + if( rc!=SQLITE_OK ){ + raw_printf(stderr, "%s\n", sqlite3_errmsg(db)); + } + + rc2 = sqlite3_finalize(pSql); + if( rc==SQLITE_OK && rc2!=SQLITE_OK ){ + rc = rc2; + raw_printf(stderr, "%s\n", sqlite3_errmsg(db)); + } + }else{ + raw_printf(stderr, "%s\n", sqlite3_errmsg(db)); + } + + return rc; +} + +/* +** Implementation of ".lint" dot command. +*/ +static int lintDotCommand( + ShellState *pState, /* Current shell tool state */ + char **azArg, /* Array of arguments passed to dot command */ + int nArg /* Number of entries in azArg[] */ +){ + int n; + n = (nArg>=2 ? (int)strlen(azArg[1]) : 0); + if( n<1 || sqlite3_strnicmp(azArg[1], "fkey-indexes", n) ) goto usage; + return lintFkeyIndexes(pState, azArg, nArg); + + usage: + raw_printf(stderr, "Usage %s sub-command ?switches...?\n", azArg[0]); + raw_printf(stderr, "Where sub-commands are:\n"); + raw_printf(stderr, " fkey-indexes\n"); + return SQLITE_ERROR; +} + + +/* ** If an input line begins with "." then invoke this routine to ** process that line. ** @@ -3377,7 +3675,7 @@ if( nArg!=2 ){ raw_printf(stderr, "Usage: .check GLOB-PATTERN\n"); rc = 2; - }else if( (zRes = readFile("testcase-out.txt"))==0 ){ + }else if( (zRes = readFile("testcase-out.txt", 0))==0 ){ raw_printf(stderr, "Error: cannot read 'testcase-out.txt'\n"); rc = 2; }else if( testcase_glob(azArg[1],zRes)==0 ){ @@ -3406,13 +3704,12 @@ char *zErrMsg = 0; open_db(p, 0); memcpy(&data, p, sizeof(data)); - data.showHeader = 1; - data.cMode = data.mode = MODE_Column; - data.colWidth[0] = 3; - data.colWidth[1] = 15; - data.colWidth[2] = 58; + data.showHeader = 0; + data.cMode = data.mode = MODE_List; + sqlite3_snprintf(sizeof(data.colSeparator),data.colSeparator,": "); data.cnt = 0; - sqlite3_exec(p->db, "PRAGMA database_list; ", callback, &data, &zErrMsg); + sqlite3_exec(p->db, "SELECT name, file FROM pragma_database_list", + callback, &data, &zErrMsg); if( zErrMsg ){ utf8_printf(stderr,"Error: %s\n", zErrMsg); sqlite3_free(zErrMsg); @@ -3793,51 +4090,78 @@ if( needCommit ) sqlite3_exec(p->db, "COMMIT", 0, 0, 0); }else - if( c=='i' && (strncmp(azArg[0], "indices", n)==0 - || strncmp(azArg[0], "indexes", n)==0) ){ - ShellState data; - char *zErrMsg = 0; +#ifndef SQLITE_UNTESTABLE + if( c=='i' && strncmp(azArg[0], "imposter", n)==0 ){ + char *zSql; + char *zCollist = 0; + sqlite3_stmt *pStmt; + int tnum = 0; + int i; + if( nArg!=3 ){ + utf8_printf(stderr, "Usage: .imposter INDEX IMPOSTER\n"); + rc = 1; + goto meta_command_exit; + } open_db(p, 0); - memcpy(&data, p, sizeof(data)); - data.showHeader = 0; - data.cMode = data.mode = MODE_List; - if( nArg==1 ){ - rc = sqlite3_exec(p->db, - "SELECT name FROM sqlite_master " - "WHERE type='index' AND name NOT LIKE 'sqlite_%' " - "UNION ALL " - "SELECT name FROM sqlite_temp_master " - "WHERE type='index' " - "ORDER BY 1", - callback, &data, &zErrMsg - ); - }else if( nArg==2 ){ - zShellStatic = azArg[1]; - rc = sqlite3_exec(p->db, - "SELECT name FROM sqlite_master " - "WHERE type='index' AND tbl_name LIKE shellstatic() " - "UNION ALL " - "SELECT name FROM sqlite_temp_master " - "WHERE type='index' AND tbl_name LIKE shellstatic() " - "ORDER BY 1", - callback, &data, &zErrMsg - ); - zShellStatic = 0; - }else{ - raw_printf(stderr, "Usage: .indexes ?LIKE-PATTERN?\n"); + zSql = sqlite3_mprintf("SELECT rootpage FROM sqlite_master" + " WHERE name='%q' AND type='index'", azArg[1]); + sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); + if( sqlite3_step(pStmt)==SQLITE_ROW ){ + tnum = sqlite3_column_int(pStmt, 0); + } + sqlite3_finalize(pStmt); + if( tnum==0 ){ + utf8_printf(stderr, "no such index: \"%s\"\n", azArg[1]); rc = 1; goto meta_command_exit; } - if( zErrMsg ){ - utf8_printf(stderr,"Error: %s\n", zErrMsg); - sqlite3_free(zErrMsg); + zSql = sqlite3_mprintf("PRAGMA index_xinfo='%q'", azArg[1]); + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); + i = 0; + while( sqlite3_step(pStmt)==SQLITE_ROW ){ + char zLabel[20]; + const char *zCol = (const char*)sqlite3_column_text(pStmt,2); + i++; + if( zCol==0 ){ + if( sqlite3_column_int(pStmt,1)==-1 ){ + zCol = "_ROWID_"; + }else{ + sqlite3_snprintf(sizeof(zLabel),zLabel,"expr%d",i); + zCol = zLabel; + } + } + if( zCollist==0 ){ + zCollist = sqlite3_mprintf("\"%w\"", zCol); + }else{ + zCollist = sqlite3_mprintf("%z,\"%w\"", zCollist, zCol); + } + } + sqlite3_finalize(pStmt); + zSql = sqlite3_mprintf( + "CREATE TABLE \"%w\"(%s,PRIMARY KEY(%s))WITHOUT ROWID", + azArg[2], zCollist, zCollist); + sqlite3_free(zCollist); + rc = sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->db, "main", 1, tnum); + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(p->db, zSql, 0, 0, 0); + sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->db, "main", 0, 0); + if( rc ){ + utf8_printf(stderr, "Error in [%s]: %s\n", zSql, sqlite3_errmsg(p->db)); + }else{ + utf8_printf(stdout, "%s;\n", zSql); + raw_printf(stdout, + "WARNING: writing to an imposter table will corrupt the index!\n" + ); + } + }else{ + raw_printf(stderr, "SQLITE_TESTCTRL_IMPOSTER returns %d\n", rc); rc = 1; - }else if( rc != SQLITE_OK ){ - raw_printf(stderr, - "Error: querying sqlite_master and sqlite_temp_master\n"); - rc = 1; } + sqlite3_free(zSql); }else +#endif /* !defined(SQLITE_OMIT_TEST_CONTROL) */ #ifdef SQLITE_ENABLE_IOTRACE if( c=='i' && strncmp(azArg[0], "iotrace", n)==0 ){ @@ -3861,6 +4185,7 @@ } }else #endif + if( c=='l' && n>=5 && strncmp(azArg[0], "limits", n)==0 ){ static const struct { const char *zLimitName; /* Name of a limit */ @@ -3920,6 +4245,11 @@ } }else + if( c=='l' && n>2 && strncmp(azArg[0], "lint", n)==0 ){ + open_db(p, 0); + lintDotCommand(p, azArg, nArg); + }else + #ifndef SQLITE_OMIT_LOAD_EXTENSION if( c=='l' && strncmp(azArg[0], "load", n)==0 ){ const char *zFile, *zProc; @@ -3977,13 +4307,15 @@ }else if( c2=='i' && strncmp(azArg[1],"insert",n2)==0 ){ p->mode = MODE_Insert; set_table_name(p, nArg>=3 ? azArg[2] : "table"); + }else if( c2=='q' && strncmp(azArg[1],"quote",n2)==0 ){ + p->mode = MODE_Quote; }else if( c2=='a' && strncmp(azArg[1],"ascii",n2)==0 ){ p->mode = MODE_Ascii; sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Unit); sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_Record); }else { raw_printf(stderr, "Error: mode should be one of: " - "ascii column csv html insert line list tabs tcl\n"); + "ascii column csv html insert line list quote tabs tcl\n"); rc = 1; } p->cMode = p->mode; @@ -4581,7 +4913,10 @@ } }else - if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 ){ + if( (c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0) + || (c=='i' && (strncmp(azArg[0], "indices", n)==0 + || strncmp(azArg[0], "indexes", n)==0) ) + ){ sqlite3_stmt *pStmt; char **azResult; int nRow, nAlloc; @@ -4594,28 +4929,41 @@ /* Create an SQL statement to query for the list of tables in the ** main and all attached databases where the table name matches the ** LIKE pattern bound to variable "?1". */ - zSql = sqlite3_mprintf( - "SELECT name FROM sqlite_master" - " WHERE type IN ('table','view')" - " AND name NOT LIKE 'sqlite_%%'" - " AND name LIKE ?1"); - while( zSql && sqlite3_step(pStmt)==SQLITE_ROW ){ + if( c=='t' ){ + zSql = sqlite3_mprintf( + "SELECT name FROM sqlite_master" + " WHERE type IN ('table','view')" + " AND name NOT LIKE 'sqlite_%%'" + " AND name LIKE ?1"); + }else if( nArg>2 ){ + /* It is an historical accident that the .indexes command shows an error + ** when called with the wrong number of arguments whereas the .tables + ** command does not. */ + raw_printf(stderr, "Usage: .indexes ?LIKE-PATTERN?\n"); + rc = 1; + goto meta_command_exit; + }else{ + zSql = sqlite3_mprintf( + "SELECT name FROM sqlite_master" + " WHERE type='index'" + " AND tbl_name LIKE ?1"); + } + for(ii=0; zSql && sqlite3_step(pStmt)==SQLITE_ROW; ii++){ const char *zDbName = (const char*)sqlite3_column_text(pStmt, 1); - if( zDbName==0 || strcmp(zDbName,"main")==0 ) continue; - if( strcmp(zDbName,"temp")==0 ){ + if( zDbName==0 || ii==0 ) continue; + if( c=='t' ){ zSql = sqlite3_mprintf( "%z UNION ALL " - "SELECT 'temp.' || name FROM sqlite_temp_master" + "SELECT '%q.' || name FROM \"%w\".sqlite_master" " WHERE type IN ('table','view')" " AND name NOT LIKE 'sqlite_%%'" - " AND name LIKE ?1", zSql); + " AND name LIKE ?1", zSql, zDbName, zDbName); }else{ zSql = sqlite3_mprintf( "%z UNION ALL " "SELECT '%q.' || name FROM \"%w\".sqlite_master" - " WHERE type IN ('table','view')" - " AND name NOT LIKE 'sqlite_%%'" - " AND name LIKE ?1", zSql, zDbName, zDbName); + " WHERE type='index'" + " AND tbl_name LIKE ?1", zSql, zDbName, zDbName); } } rc = sqlite3_finalize(pStmt); @@ -4690,7 +5038,7 @@ output_reset(p); p->out = output_file_open("testcase-out.txt"); if( p->out==0 ){ - utf8_printf(stderr, "Error: cannot open 'testcase-out.txt'\n"); + raw_printf(stderr, "Error: cannot open 'testcase-out.txt'\n"); } if( nArg>=2 ){ sqlite3_snprintf(sizeof(p->zTestcase), p->zTestcase, "%s", azArg[1]); @@ -4699,6 +5047,7 @@ } }else +#ifndef SQLITE_UNTESTABLE if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 && nArg>=2 ){ static const struct { const char *zCtrlName; /* Name of a test-control option */ @@ -4874,6 +5223,7 @@ } #endif }else +#endif /* !defined(SQLITE_UNTESTABLE) */ #if SQLITE_USER_AUTHENTICATION if( c=='u' && strncmp(azArg[0], "user", n)==0 ){ @@ -5083,6 +5433,42 @@ } /* +** Run a single line of SQL +*/ +static int runOneSqlLine(ShellState *p, char *zSql, FILE *in, int startline){ + int rc; + char *zErrMsg = 0; + + open_db(p, 0); + if( p->backslashOn ) resolve_backslashes(zSql); + BEGIN_TIMER; + rc = shell_exec(p->db, zSql, shell_callback, p, &zErrMsg); + END_TIMER; + if( rc || zErrMsg ){ + char zPrefix[100]; + if( in!=0 || !stdin_is_interactive ){ + sqlite3_snprintf(sizeof(zPrefix), zPrefix, + "Error: near line %d:", startline); + }else{ + sqlite3_snprintf(sizeof(zPrefix), zPrefix, "Error:"); + } + if( zErrMsg!=0 ){ + utf8_printf(stderr, "%s %s\n", zPrefix, zErrMsg); + sqlite3_free(zErrMsg); + zErrMsg = 0; + }else{ + utf8_printf(stderr, "%s %s\n", zPrefix, sqlite3_errmsg(p->db)); + } + return 1; + }else if( p->countChanges ){ + raw_printf(p->out, "changes: %3d total_changes: %d\n", + sqlite3_changes(p->db), sqlite3_total_changes(p->db)); + } + return 0; +} + + +/* ** Read input from *in and process it. If *in==0 then input ** is interactive - the user is typing it it. Otherwise, input ** is coming from a file or device. A prompt is issued and history @@ -5098,7 +5484,6 @@ int nSql = 0; /* Bytes of zSql[] used */ int nAlloc = 0; /* Allocated zSql[] space */ int nSqlPrior = 0; /* Bytes of zSql[] used by prior line */ - char *zErrMsg; /* Error message returned */ int rc; /* Error code */ int errCnt = 0; /* Number of errors seen */ int lineno = 0; /* Current line number */ @@ -5158,32 +5543,7 @@ } if( nSql && line_contains_semicolon(&zSql[nSqlPrior], nSql-nSqlPrior) && sqlite3_complete(zSql) ){ - p->cnt = 0; - open_db(p, 0); - if( p->backslashOn ) resolve_backslashes(zSql); - BEGIN_TIMER; - rc = shell_exec(p->db, zSql, shell_callback, p, &zErrMsg); - END_TIMER; - if( rc || zErrMsg ){ - char zPrefix[100]; - if( in!=0 || !stdin_is_interactive ){ - sqlite3_snprintf(sizeof(zPrefix), zPrefix, - "Error: near line %d:", startline); - }else{ - sqlite3_snprintf(sizeof(zPrefix), zPrefix, "Error:"); - } - if( zErrMsg!=0 ){ - utf8_printf(stderr, "%s %s\n", zPrefix, zErrMsg); - sqlite3_free(zErrMsg); - zErrMsg = 0; - }else{ - utf8_printf(stderr, "%s %s\n", zPrefix, sqlite3_errmsg(p->db)); - } - errCnt++; - }else if( p->countChanges ){ - raw_printf(p->out, "changes: %3d total_changes: %d\n", - sqlite3_changes(p->db), sqlite3_total_changes(p->db)); - } + errCnt += runOneSqlLine(p, zSql, in, startline); nSql = 0; if( p->outCount ){ output_reset(p); @@ -5194,11 +5554,8 @@ nSql = 0; } } - if( nSql ){ - if( !_all_whitespace(zSql) ){ - utf8_printf(stderr, "Error: incomplete SQL: %s\n", zSql); - errCnt++; - } + if( nSql && !_all_whitespace(zSql) ){ + runOneSqlLine(p, zSql, in, startline); } free(zSql); free(zLine); Index: ext/sqlite3/sqlite3.c =================================================================== diff -u -r1b493d168198c71cffd0e132c90a20a7877c2bad -r9385e0380e81d2423e5131455fe275f66f473690 --- ext/sqlite3/sqlite3.c (.../sqlite3.c) (revision 1b493d168198c71cffd0e132c90a20a7877c2bad) +++ ext/sqlite3/sqlite3.c (.../sqlite3.c) (revision 9385e0380e81d2423e5131455fe275f66f473690) @@ -1,6 +1,6 @@ /****************************************************************************** ** This file is an amalgamation of many separate C source files from SQLite -** version 3.15.2. By combining all the individual C code files into this +** version 3.16.0. By combining all the individual C code files into this ** single large file, the entire code can be compiled as a single translation ** unit. This allows many compilers to do optimizations that would not be ** possible if the files were compiled separately. Performance improvements @@ -381,13 +381,13 @@ ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.15.2" -#define SQLITE_VERSION_NUMBER 3015002 -#define SQLITE_SOURCE_ID "2016-11-28 19:13:37 bbd85d235f7037c6a033a9690534391ffeacecc8" +#define SQLITE_VERSION "3.16.0" +#define SQLITE_VERSION_NUMBER 3016000 +#define SQLITE_SOURCE_ID "2017-01-02 11:57:58 04ac0b75b1716541b2b97704f4809cb7ef19cccf" /* ** CAPI3REF: Run-Time Library Version Numbers -** KEYWORDS: sqlite3_version, sqlite3_sourceid +** KEYWORDS: sqlite3_version sqlite3_sourceid ** ** These interfaces provide the same information as the [SQLITE_VERSION], ** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros @@ -1295,6 +1295,7 @@ #define SQLITE_FCNTL_VFS_POINTER 27 #define SQLITE_FCNTL_JOURNAL_POINTER 28 #define SQLITE_FCNTL_WIN32_GET_HANDLE 29 +#define SQLITE_FCNTL_PDB 30 /* deprecated names */ #define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE @@ -2247,6 +2248,18 @@ ** until after the database connection closes. ** ** +**
SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE
+**
Usually, when a database in wal mode is closed or detached from a +** database handle, SQLite checks if this will mean that there are now no +** connections at all to the database. If so, it performs a checkpoint +** operation before closing the connection. This option may be used to +** override this behaviour. The first parameter passed to this operation +** is an integer - non-zero to disable checkpoints-on-close, or zero (the +** default) to enable them. The second parameter is a pointer to an integer +** into which is written 0 or 1 to indicate whether checkpoints-on-close +** have been disabled - 0 if they are not disabled, 1 if they are. +**
+** ** */ #define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */ @@ -2255,6 +2268,7 @@ #define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */ +#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */ /* @@ -3856,6 +3870,10 @@ ** sqlite3_stmt_readonly() to return true since, while those statements ** change the configuration of a database connection, they do not make ** changes to the content of the database files on disk. +** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since +** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and +** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so +** sqlite3_stmt_readonly() returns false for those commands. */ SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt); @@ -8471,7 +8489,8 @@ ** ** See also: [sqlite3_update_hook()] */ -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_preupdate_hook( +#if defined(SQLITE_ENABLE_PREUPDATE_HOOK) +SQLITE_API void *sqlite3_preupdate_hook( sqlite3 *db, void(*xPreUpdate)( void *pCtx, /* Copy of third arg to preupdate_hook() */ @@ -8484,10 +8503,11 @@ ), void* ); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_count(sqlite3 *); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_depth(sqlite3 *); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **); +SQLITE_API int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **); +SQLITE_API int sqlite3_preupdate_count(sqlite3 *); +SQLITE_API int sqlite3_preupdate_depth(sqlite3 *); +SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **); +#endif /* ** CAPI3REF: Low-level system error code @@ -8503,7 +8523,7 @@ /* ** CAPI3REF: Database Snapshot -** KEYWORDS: {snapshot} +** KEYWORDS: {snapshot} {sqlite3_snapshot} ** EXPERIMENTAL ** ** An instance of the snapshot object records the state of a [WAL mode] @@ -8527,7 +8547,9 @@ ** to an historical snapshot (if possible). The destructor for ** sqlite3_snapshot objects is [sqlite3_snapshot_free()]. */ -typedef struct sqlite3_snapshot sqlite3_snapshot; +typedef struct sqlite3_snapshot { + unsigned char hidden[48]; +} sqlite3_snapshot; /* ** CAPI3REF: Record A Database Snapshot @@ -8538,10 +8560,33 @@ ** schema S in database connection D. ^On success, the ** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly ** created [sqlite3_snapshot] object into *P and returns SQLITE_OK. -** ^If schema S of [database connection] D is not a [WAL mode] database -** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)] -** leaves the *P value unchanged and returns an appropriate [error code]. +** If there is not already a read-transaction open on schema S when +** this function is called, one is opened automatically. ** +** The following must be true for this function to succeed. If any of +** the following statements are false when sqlite3_snapshot_get() is +** called, SQLITE_ERROR is returned. The final value of *P is undefined +** in this case. +** +**
    +**
  • The database handle must be in [autocommit mode]. +** +**
  • Schema S of [database connection] D must be a [WAL mode] database. +** +**
  • There must not be a write transaction open on schema S of database +** connection D. +** +**
  • One or more transactions must have been written to the current wal +** file since it was created on disk (by any connection). This means +** that a snapshot cannot be taken on a wal mode database with no wal +** file immediately after it is first opened. At least one transaction +** must be written to it first. +**
+** +** This function may also return SQLITE_NOMEM. If it is called with the +** database handle in autocommit mode but fails for some other reason, +** whether or not a read transaction is opened on schema S is undefined. +** ** The [sqlite3_snapshot] object returned from a successful call to ** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()] ** to avoid a memory leak. @@ -8634,6 +8679,28 @@ ); /* +** CAPI3REF: Recover snapshots from a wal file +** EXPERIMENTAL +** +** If all connections disconnect from a database file but do not perform +** a checkpoint, the existing wal file is opened along with the database +** file the next time the database is opened. At this point it is only +** possible to successfully call sqlite3_snapshot_open() to open the most +** recent snapshot of the database (the one at the head of the wal file), +** even though the wal file may contain other valid snapshots for which +** clients have sqlite3_snapshot handles. +** +** This function attempts to scan the wal file associated with database zDb +** of database handle db and make all valid snapshots available to +** sqlite3_snapshot_open(). It is an error if there is already a read +** transaction open on the database, or if the database is not a wal mode +** database. +** +** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +*/ +SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb); + +/* ** Undo the hack that converts floating point types to integer for ** builds on processors without floating point support. */ @@ -12011,6 +12078,14 @@ typedef struct WhereInfo WhereInfo; typedef struct With With; +/* A VList object records a mapping between parameters/variables/wildcards +** in the SQL statement (such as $abc, @pqr, or :xyz) and the integer +** variable number associated with that parameter. See the format description +** on the sqlite3VListAdd() routine for more information. A VList is really +** just an array of integers. +*/ +typedef int VList; + /* ** Defer sourcing vdbe.h and btree.h until after the "u8" and ** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque @@ -12295,6 +12370,8 @@ const void *pKey; /* Key content for indexes. NULL for tables */ sqlite3_int64 nKey; /* Size of pKey for indexes. PRIMARY KEY for tabs */ const void *pData; /* Data for tables. NULL for indexes */ + struct Mem *aMem; /* First of nMem value in the unpacked pKey */ + u16 nMem; /* Number of aMem[] value. Might be zero */ int nData; /* Size of pData. 0 if none. */ int nZero; /* Extra zero data appended after pData,nData */ }; @@ -12307,15 +12384,15 @@ SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes); SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*); +SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor*, u32 offset, u32 amt, void*); SQLITE_PRIVATE const void *sqlite3BtreePayloadFetch(BtCursor*, u32 *pAmt); SQLITE_PRIVATE u32 sqlite3BtreePayloadSize(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*); SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*); SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); #ifndef SQLITE_OMIT_INCRBLOB +SQLITE_PRIVATE int sqlite3BtreePayloadChecked(BtCursor*, u32 offset, u32 amt, void*); SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*); SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *); #endif @@ -12328,6 +12405,7 @@ #ifndef NDEBUG SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*); #endif +SQLITE_PRIVATE int sqlite3BtreeCursorIsValidNN(BtCursor*); #ifndef SQLITE_OMIT_BTREECOUNT SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *, i64 *); @@ -12501,22 +12579,21 @@ #define P4_NOTUSED 0 /* The P4 parameter is not used */ #define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */ #define P4_STATIC (-2) /* Pointer to a static string */ -#define P4_COLLSEQ (-4) /* P4 is a pointer to a CollSeq structure */ -#define P4_FUNCDEF (-5) /* P4 is a pointer to a FuncDef structure */ -#define P4_KEYINFO (-6) /* P4 is a pointer to a KeyInfo structure */ -#define P4_EXPR (-7) /* P4 is a pointer to an Expr tree */ -#define P4_MEM (-8) /* P4 is a pointer to a Mem* structure */ +#define P4_COLLSEQ (-3) /* P4 is a pointer to a CollSeq structure */ +#define P4_FUNCDEF (-4) /* P4 is a pointer to a FuncDef structure */ +#define P4_KEYINFO (-5) /* P4 is a pointer to a KeyInfo structure */ +#define P4_EXPR (-6) /* P4 is a pointer to an Expr tree */ +#define P4_MEM (-7) /* P4 is a pointer to a Mem* structure */ #define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */ -#define P4_VTAB (-10) /* P4 is a pointer to an sqlite3_vtab structure */ -#define P4_MPRINTF (-11) /* P4 is a string obtained from sqlite3_mprintf() */ -#define P4_REAL (-12) /* P4 is a 64-bit floating point value */ -#define P4_INT64 (-13) /* P4 is a 64-bit signed integer */ -#define P4_INT32 (-14) /* P4 is a 32-bit signed integer */ -#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */ -#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */ -#define P4_ADVANCE (-19) /* P4 is a pointer to BtreeNext() or BtreePrev() */ -#define P4_TABLE (-20) /* P4 is a pointer to a Table structure */ -#define P4_FUNCCTX (-21) /* P4 is a pointer to an sqlite3_context object */ +#define P4_VTAB (-8) /* P4 is a pointer to an sqlite3_vtab structure */ +#define P4_REAL (-9) /* P4 is a 64-bit floating point value */ +#define P4_INT64 (-10) /* P4 is a 64-bit signed integer */ +#define P4_INT32 (-11) /* P4 is a 32-bit signed integer */ +#define P4_INTARRAY (-12) /* P4 is a vector of 32-bit integers */ +#define P4_SUBPROGRAM (-13) /* P4 is a pointer to a SubProgram structure */ +#define P4_ADVANCE (-14) /* P4 is a pointer to BtreeNext() or BtreePrev() */ +#define P4_TABLE (-15) /* P4 is a pointer to a Table structure */ +#define P4_FUNCCTX (-16) /* P4 is a pointer to an sqlite3_context object */ /* Error message codes for OP_Halt */ #define P5_ConstraintNotNull 1 @@ -12626,7 +12703,7 @@ #define OP_Program 64 #define OP_FkIfZero 65 /* synopsis: if fkctr[P1]==0 goto P2 */ #define OP_IfPos 66 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */ -#define OP_IfNotZero 67 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */ +#define OP_IfNotZero 67 /* synopsis: if r[P1]!=0 then r[P1]--, goto P2 */ #define OP_DecrJumpZero 68 /* synopsis: if (--r[P1])==0 goto P2 */ #define OP_IncrVacuum 69 #define OP_VNext 70 @@ -12680,48 +12757,47 @@ #define OP_ResetCount 118 #define OP_SorterCompare 119 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ #define OP_SorterData 120 /* synopsis: r[P2]=data */ -#define OP_RowKey 121 /* synopsis: r[P2]=key */ -#define OP_RowData 122 /* synopsis: r[P2]=data */ -#define OP_Rowid 123 /* synopsis: r[P2]=rowid */ -#define OP_NullRow 124 -#define OP_SorterInsert 125 -#define OP_IdxInsert 126 /* synopsis: key=r[P2] */ -#define OP_IdxDelete 127 /* synopsis: key=r[P2@P3] */ -#define OP_Seek 128 /* synopsis: Move P3 to P1.rowid */ -#define OP_IdxRowid 129 /* synopsis: r[P2]=rowid */ -#define OP_Destroy 130 -#define OP_Clear 131 +#define OP_RowData 121 /* synopsis: r[P2]=data */ +#define OP_Rowid 122 /* synopsis: r[P2]=rowid */ +#define OP_NullRow 123 +#define OP_SorterInsert 124 /* synopsis: key=r[P2] */ +#define OP_IdxInsert 125 /* synopsis: key=r[P2] */ +#define OP_IdxDelete 126 /* synopsis: key=r[P2@P3] */ +#define OP_Seek 127 /* synopsis: Move P3 to P1.rowid */ +#define OP_IdxRowid 128 /* synopsis: r[P2]=rowid */ +#define OP_Destroy 129 +#define OP_Clear 130 +#define OP_ResetSorter 131 #define OP_Real 132 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ -#define OP_ResetSorter 133 -#define OP_CreateIndex 134 /* synopsis: r[P2]=root iDb=P1 */ -#define OP_CreateTable 135 /* synopsis: r[P2]=root iDb=P1 */ -#define OP_ParseSchema 136 -#define OP_LoadAnalysis 137 -#define OP_DropTable 138 -#define OP_DropIndex 139 -#define OP_DropTrigger 140 -#define OP_IntegrityCk 141 -#define OP_RowSetAdd 142 /* synopsis: rowset(P1)=r[P2] */ -#define OP_Param 143 -#define OP_FkCounter 144 /* synopsis: fkctr[P1]+=P2 */ -#define OP_MemMax 145 /* synopsis: r[P1]=max(r[P1],r[P2]) */ -#define OP_OffsetLimit 146 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */ -#define OP_AggStep0 147 /* synopsis: accum=r[P3] step(r[P2@P5]) */ -#define OP_AggStep 148 /* synopsis: accum=r[P3] step(r[P2@P5]) */ -#define OP_AggFinal 149 /* synopsis: accum=r[P1] N=P2 */ -#define OP_Expire 150 -#define OP_TableLock 151 /* synopsis: iDb=P1 root=P2 write=P3 */ -#define OP_VBegin 152 -#define OP_VCreate 153 -#define OP_VDestroy 154 -#define OP_VOpen 155 -#define OP_VColumn 156 /* synopsis: r[P3]=vcolumn(P2) */ -#define OP_VRename 157 -#define OP_Pagecount 158 -#define OP_MaxPgcnt 159 -#define OP_CursorHint 160 -#define OP_Noop 161 -#define OP_Explain 162 +#define OP_CreateIndex 133 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_CreateTable 134 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_ParseSchema 135 +#define OP_LoadAnalysis 136 +#define OP_DropTable 137 +#define OP_DropIndex 138 +#define OP_DropTrigger 139 +#define OP_IntegrityCk 140 +#define OP_RowSetAdd 141 /* synopsis: rowset(P1)=r[P2] */ +#define OP_Param 142 +#define OP_FkCounter 143 /* synopsis: fkctr[P1]+=P2 */ +#define OP_MemMax 144 /* synopsis: r[P1]=max(r[P1],r[P2]) */ +#define OP_OffsetLimit 145 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */ +#define OP_AggStep0 146 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_AggStep 147 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_AggFinal 148 /* synopsis: accum=r[P1] N=P2 */ +#define OP_Expire 149 +#define OP_TableLock 150 /* synopsis: iDb=P1 root=P2 write=P3 */ +#define OP_VBegin 151 +#define OP_VCreate 152 +#define OP_VDestroy 153 +#define OP_VOpen 154 +#define OP_VColumn 155 /* synopsis: r[P3]=vcolumn(P2) */ +#define OP_VRename 156 +#define OP_Pagecount 157 +#define OP_MaxPgcnt 158 +#define OP_CursorHint 159 +#define OP_Noop 160 +#define OP_Explain 161 /* Properties such as "out2" or "jump" that are specified in ** comments following the "case" for each opcode in the vdbe.c @@ -12749,12 +12825,12 @@ /* 96 */ 0x00, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\ /* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ /* 112 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 120 */ 0x00, 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00,\ -/* 128 */ 0x00, 0x10, 0x10, 0x00, 0x10, 0x00, 0x10, 0x10,\ -/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10,\ -/* 144 */ 0x00, 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10,\ -/* 160 */ 0x00, 0x00, 0x00,} +/* 120 */ 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00, 0x00,\ +/* 128 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x10, 0x00,\ +/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x00,\ +/* 144 */ 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00,\ +/* 160 */ 0x00, 0x00,} /* The sqlite3P2Values() routine is able to run faster if it knows ** the value of the largest JUMP opcode. The smaller the maximum @@ -12799,6 +12875,7 @@ SQLITE_PRIVATE int sqlite3VdbeChangeToNoop(Vdbe*, int addr); SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe*, u8 op); SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N); +SQLITE_PRIVATE void sqlite3VdbeAppendP4(Vdbe*, void *pP4, int p4type); SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse*, Index*); SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int); SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int); @@ -12834,7 +12911,7 @@ SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*); SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); SQLITE_PRIVATE int sqlite3VdbeRecordCompareWithSkip(int, const void *, UnpackedRecord *, int); -SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **); +SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo*); typedef int (*RecordCompare)(int,const void*,UnpackedRecord*); SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*); @@ -13039,7 +13116,7 @@ int, void(*)(DbPage*) ); -SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3*); SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*); /* Functions used to configure a Pager object. */ @@ -13090,15 +13167,16 @@ SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager); #ifndef SQLITE_OMIT_WAL -SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int, int*, int*); +SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, sqlite3*, int, int*, int*); SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager); SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager); SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen); -SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager, sqlite3*); SQLITE_PRIVATE int sqlite3PagerUseWal(Pager *pPager); # ifdef SQLITE_ENABLE_SNAPSHOT SQLITE_PRIVATE int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot); SQLITE_PRIVATE int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot); +SQLITE_PRIVATE int sqlite3PagerSnapshotRecover(Pager *pPager); # endif #else # define sqlite3PagerUseWal(x) 0 @@ -14072,6 +14150,7 @@ #define SQLITE_Vacuum 0x10000000 /* Currently in a VACUUM */ #define SQLITE_CellSizeCk 0x20000000 /* Check btree cell sizes on load */ #define SQLITE_Fts3Tokenizer 0x40000000 /* Enable fts3_tokenizer(2) */ +#define SQLITE_NoCkptOnClose 0x80000000 /* No checkpoint on close()/DETACH */ /* @@ -14097,13 +14176,8 @@ /* ** Macros for testing whether or not optimizations are enabled or disabled. */ -#ifndef SQLITE_OMIT_BUILTIN_TEST #define OptimizationDisabled(db, mask) (((db)->dbOptFlags&(mask))!=0) #define OptimizationEnabled(db, mask) (((db)->dbOptFlags&(mask))==0) -#else -#define OptimizationDisabled(db, mask) 0 -#define OptimizationEnabled(db, mask) 1 -#endif /* ** Return true if it OK to factor constant expressions into the initialization @@ -14442,9 +14516,9 @@ ExprList *pCheck; /* All CHECK constraints */ /* ... also used as column name list in a VIEW */ int tnum; /* Root BTree page for this table */ + u32 nTabRef; /* Number of pointers to this Table */ i16 iPKey; /* If not negative, use aCol[iPKey] as the rowid */ i16 nCol; /* Number of columns in this table */ - u16 nRef; /* Number of pointers to this Table */ LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */ LogEst szTabRow; /* Estimated size of each table row in bytes */ #ifdef SQLITE_ENABLE_COSTMULT @@ -15593,7 +15667,6 @@ Token sLastToken; /* The last token parsed */ ynVar nVar; /* Number of '?' variables seen in the SQL so far */ - int nzVar; /* Number of available slots in azVar[] */ u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */ u8 explain; /* True if the EXPLAIN flag is found on the query */ #ifndef SQLITE_OMIT_VIRTUALTABLE @@ -15605,7 +15678,7 @@ int iSelectId; /* ID of current select for EXPLAIN output */ int iNextSelectId; /* Next available select ID for EXPLAIN output */ #endif - char **azVar; /* Pointers to names of parameters */ + VList *pVList; /* Mapping between variable names and numbers */ Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */ const char *zTail; /* All SQL text past the last semicolon parsed */ Table *pNewTable; /* A table being constructed by CREATE TABLE */ @@ -15873,7 +15946,7 @@ void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */ void *pVdbeBranchArg; /* 1st argument */ #endif -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */ #endif int bLocaltimeFault; /* True to fail localtime() calls */ @@ -16077,7 +16150,7 @@ SQLITE_PRIVATE void *sqlite3PageMalloc(int); SQLITE_PRIVATE void sqlite3PageFree(void*); SQLITE_PRIVATE void sqlite3MemSetDefault(void); -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE SQLITE_PRIVATE void sqlite3BenignMallocHooks(void (*)(void), void (*)(void)); #endif SQLITE_PRIVATE int sqlite3HeapNearlyFull(void); @@ -16188,7 +16261,7 @@ SQLITE_PRIVATE Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int); SQLITE_PRIVATE Expr *sqlite3Expr(sqlite3*,int,const char*); SQLITE_PRIVATE void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*); -SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*); +SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*); SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse*, Expr*, Select*); SQLITE_PRIVATE Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*); SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*); @@ -16204,6 +16277,9 @@ SQLITE_PRIVATE int sqlite3Init(sqlite3*, char**); SQLITE_PRIVATE int sqlite3InitCallback(void*, int, char**, char**); SQLITE_PRIVATE void sqlite3Pragma(Parse*,Token*,Token*,Token*,int); +#ifndef SQLITE_OMIT_VIRTUALTABLE +SQLITE_PRIVATE Module *sqlite3PragmaVtabRegister(sqlite3*,const char *zName); +#endif SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3*); SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3*,int); SQLITE_PRIVATE void sqlite3CollapseDatabaseArray(sqlite3*); @@ -16232,7 +16308,7 @@ sqlite3_vfs**,char**,char **); SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*); -#ifdef SQLITE_OMIT_BUILTIN_TEST +#ifdef SQLITE_UNTESTABLE # define sqlite3FaultSim(X) SQLITE_OK #else SQLITE_PRIVATE int sqlite3FaultSim(int); @@ -16245,7 +16321,7 @@ SQLITE_PRIVATE void sqlite3BitvecClear(Bitvec*, u32, void*); SQLITE_PRIVATE void sqlite3BitvecDestroy(Bitvec*); SQLITE_PRIVATE u32 sqlite3BitvecSize(Bitvec*); -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE SQLITE_PRIVATE int sqlite3BitvecBuiltinTest(int,int*); #endif @@ -16342,6 +16418,7 @@ #define SQLITE_ECEL_DUP 0x01 /* Deep, not shallow copies */ #define SQLITE_ECEL_FACTOR 0x02 /* Factor out constant terms */ #define SQLITE_ECEL_REF 0x04 /* Use ExprList.u.x.iOrderByCol */ +#define SQLITE_ECEL_OMITREF 0x08 /* Omit if ExprList.u.x.iOrderByCol */ SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse*, Expr*, int, int); SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse*, Expr*, int, int); SQLITE_PRIVATE void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int); @@ -16364,7 +16441,7 @@ SQLITE_PRIVATE int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx); SQLITE_PRIVATE int sqlite3FunctionUsesThisSrc(Expr*, SrcList*); SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse*); -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE SQLITE_PRIVATE void sqlite3PrngSaveState(void); SQLITE_PRIVATE void sqlite3PrngRestoreState(void); #endif @@ -16501,6 +16578,9 @@ defined(SQLITE_EXPLAIN_ESTIMATED_ROWS) SQLITE_PRIVATE u64 sqlite3LogEstToInt(LogEst); #endif +SQLITE_PRIVATE VList *sqlite3VListAdd(sqlite3*,VList*,const char*,int,int); +SQLITE_PRIVATE const char *sqlite3VListNumToName(VList*,int); +SQLITE_PRIVATE int sqlite3VListNameToNum(VList*,const char*,int); /* ** Routines to read and write variable-length integers. These used to @@ -16717,6 +16797,13 @@ SQLITE_PRIVATE int sqlite3VtabSavepoint(sqlite3 *, int, int); SQLITE_PRIVATE void sqlite3VtabImportErrmsg(Vdbe*, sqlite3_vtab*); SQLITE_PRIVATE VTable *sqlite3GetVTable(sqlite3*, Table*); +SQLITE_PRIVATE Module *sqlite3VtabCreateModule( + sqlite3*, + const char*, + const sqlite3_module*, + void*, + void(*)(void*) + ); # define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0) #endif SQLITE_PRIVATE int sqlite3VtabEponymousTableInit(Parse*,Module*); @@ -16792,10 +16879,10 @@ /* ** The interface to the code in fault.c used for identifying "benign" -** malloc failures. This is only present if SQLITE_OMIT_BUILTIN_TEST +** malloc failures. This is only present if SQLITE_UNTESTABLE ** is not defined. */ -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE SQLITE_PRIVATE void sqlite3BeginBenignMalloc(void); SQLITE_PRIVATE void sqlite3EndBenignMalloc(void); #else @@ -16926,6 +17013,7 @@ SQLITE_PRIVATE int sqlite3ExprIsVector(Expr *pExpr); SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr*, int); SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(Parse*,Expr*,int); +SQLITE_PRIVATE void sqlite3VectorErrorMsg(Parse*, Expr*); #endif /* SQLITEINT_H */ @@ -17114,8 +17202,8 @@ SQLITE_ALLOW_COVERING_INDEX_SCAN, /* bUseCis */ 0x7ffffffe, /* mxStrlen */ 0, /* neverCorrupt */ - 128, /* szLookaside */ - 500, /* nLookaside */ + 512, /* szLookaside */ + 125, /* nLookaside */ SQLITE_STMTJRNL_SPILL, /* nStmtSpill */ {0,0,0,0,0,0,0,0}, /* m */ {0,0,0,0,0,0,0,0,0}, /* mutex */ @@ -17152,7 +17240,7 @@ 0, /* xVdbeBranch */ 0, /* pVbeBranchArg */ #endif -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE 0, /* xTestCallback */ #endif 0, /* bLocaltimeFault */ @@ -17281,6 +17369,9 @@ #if defined(SQLITE_DEFAULT_MMAP_SIZE) && !defined(SQLITE_DEFAULT_MMAP_SIZE_xc) "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE), #endif +#if SQLITE_DIRECT_OVERFLOW_READ + "DIRECT_OVERFLOW_READ", +#endif #if SQLITE_DISABLE_DIRSYNC "DISABLE_DIRSYNC", #endif @@ -17367,6 +17458,9 @@ #if SQLITE_ENABLE_UPDATE_DELETE_LIMIT "ENABLE_UPDATE_DELETE_LIMIT", #endif +#if defined(SQLITE_ENABLE_URI_00_ERROR) + "ENABLE_URI_00_ERROR", +#endif #if SQLITE_HAS_CODEC "HAS_CODEC", #endif @@ -17442,9 +17536,6 @@ #if SQLITE_OMIT_BTREECOUNT "OMIT_BTREECOUNT", #endif -#if SQLITE_OMIT_BUILTIN_TEST - "OMIT_BUILTIN_TEST", -#endif #if SQLITE_OMIT_CAST "OMIT_CAST", #endif @@ -17607,6 +17698,9 @@ #if defined(SQLITE_THREADSAFE) "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE), #endif +#if SQLITE_UNTESTABLE + "UNTESTABLE" +#endif #if SQLITE_USE_ALLOCA "USE_ALLOCA", #endif @@ -17760,57 +17854,60 @@ */ typedef struct VdbeCursor VdbeCursor; struct VdbeCursor { - u8 eCurType; /* One of the CURTYPE_* values above */ - i8 iDb; /* Index of cursor database in db->aDb[] (or -1) */ - u8 nullRow; /* True if pointing to a row with no data */ - u8 deferredMoveto; /* A call to sqlite3BtreeMoveto() is needed */ - u8 isTable; /* True for rowid tables. False for indexes */ + u8 eCurType; /* One of the CURTYPE_* values above */ + i8 iDb; /* Index of cursor database in db->aDb[] (or -1) */ + u8 nullRow; /* True if pointing to a row with no data */ + u8 deferredMoveto; /* A call to sqlite3BtreeMoveto() is needed */ + u8 isTable; /* True for rowid tables. False for indexes */ #ifdef SQLITE_DEBUG - u8 seekOp; /* Most recent seek operation on this cursor */ - u8 wrFlag; /* The wrFlag argument to sqlite3BtreeCursor() */ + u8 seekOp; /* Most recent seek operation on this cursor */ + u8 wrFlag; /* The wrFlag argument to sqlite3BtreeCursor() */ #endif - Bool isEphemeral:1; /* True for an ephemeral table */ - Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */ - Bool isOrdered:1; /* True if the table is not BTREE_UNORDERED */ - Pgno pgnoRoot; /* Root page of the open btree cursor */ - i16 nField; /* Number of fields in the header */ - u16 nHdrParsed; /* Number of header fields parsed so far */ + Bool isEphemeral:1; /* True for an ephemeral table */ + Bool useRandomRowid:1; /* Generate new record numbers semi-randomly */ + Bool isOrdered:1; /* True if the table is not BTREE_UNORDERED */ + Btree *pBtx; /* Separate file holding temporary table */ + i64 seqCount; /* Sequence counter */ + int *aAltMap; /* Mapping from table to index column numbers */ + + /* Cached OP_Column parse information is only valid if cacheStatus matches + ** Vdbe.cacheCtr. Vdbe.cacheCtr will never take on the value of + ** CACHE_STALE (0) and so setting cacheStatus=CACHE_STALE guarantees that + ** the cache is out of date. */ + u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */ + int seekResult; /* Result of previous sqlite3BtreeMoveto() or 0 + ** if there have been no prior seeks on the cursor. */ + /* NB: seekResult does not distinguish between "no seeks have ever occurred + ** on this cursor" and "the most recent seek was an exact match". */ + + /* When a new VdbeCursor is allocated, only the fields above are zeroed. + ** The fields that follow are uninitialized, and must be individually + ** initialized prior to first use. */ + VdbeCursor *pAltCursor; /* Associated index cursor from which to read */ union { BtCursor *pCursor; /* CURTYPE_BTREE. Btree cursor */ sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */ int pseudoTableReg; /* CURTYPE_PSEUDO. Reg holding content. */ VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */ } uc; - Btree *pBt; /* Separate file holding temporary table */ - KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */ - int seekResult; /* Result of previous sqlite3BtreeMoveto() */ - i64 seqCount; /* Sequence counter */ - i64 movetoTarget; /* Argument to the deferred sqlite3BtreeMoveto() */ - VdbeCursor *pAltCursor; /* Associated index cursor from which to read */ - int *aAltMap; /* Mapping from table to index column numbers */ + KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */ + u32 iHdrOffset; /* Offset to next unparsed byte of the header */ + Pgno pgnoRoot; /* Root page of the open btree cursor */ + i16 nField; /* Number of fields in the header */ + u16 nHdrParsed; /* Number of header fields parsed so far */ + i64 movetoTarget; /* Argument to the deferred sqlite3BtreeMoveto() */ + u32 *aOffset; /* Pointer to aType[nField] */ + const u8 *aRow; /* Data for the current row, if all on one page */ + u32 payloadSize; /* Total number of bytes in the record */ + u32 szRow; /* Byte available in aRow */ #ifdef SQLITE_ENABLE_COLUMN_USED_MASK - u64 maskUsed; /* Mask of columns used by this cursor */ + u64 maskUsed; /* Mask of columns used by this cursor */ #endif - /* Cached information about the header for the data record that the - ** cursor is currently pointing to. Only valid if cacheStatus matches - ** Vdbe.cacheCtr. Vdbe.cacheCtr will never take on the value of - ** CACHE_STALE and so setting cacheStatus=CACHE_STALE guarantees that - ** the cache is out of date. - ** - ** aRow might point to (ephemeral) data for the current row, or it might - ** be NULL. - */ - u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */ - u32 payloadSize; /* Total number of bytes in the record */ - u32 szRow; /* Byte available in aRow */ - u32 iHdrOffset; /* Offset to next unparsed byte of the header */ - const u8 *aRow; /* Data for the current row, if all on one page */ - u32 *aOffset; /* Pointer to aType[nField] */ - u32 aType[1]; /* Type values for all entries in the record */ /* 2*nField extra array elements allocated for aType[], beyond the one ** static element declared in the structure. nField total array slots for ** aType[] and nField+1 array slots for aOffset[] */ + u32 aType[1]; /* Type values record decode. MUST BE LAST */ }; @@ -18030,7 +18127,6 @@ Vdbe *pPrev,*pNext; /* Linked list of VDBEs with the same Vdbe.db */ Parse *pParse; /* Parsing context used to create this Vdbe */ ynVar nVar; /* Number of entries in aVar[] */ - ynVar nzVar; /* Number of entries in azVar[] */ u32 magic; /* Magic number for sanity checking */ int nMem; /* Number of memory locations currently allocated */ int nCursor; /* Number of slots in apCsr[] */ @@ -18055,7 +18151,7 @@ char *zErrMsg; /* Error message written here */ VdbeCursor **apCsr; /* One element of this array for each open cursor */ Mem *aVar; /* Values for the OP_Variable opcode. */ - char **azVar; /* Name of variables */ + VList *pVList; /* Name of variables */ #ifndef SQLITE_OMIT_TRACE i64 startTime; /* Time when query started - used for profiling */ #endif @@ -18171,7 +18267,7 @@ SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem*); SQLITE_PRIVATE void sqlite3VdbeMemCast(Mem*,u8,u8); -SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,int,Mem*); +SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,Mem*); SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p); SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem*, FuncDef*); SQLITE_PRIVATE const char *sqlite3OpcodeName(int); @@ -18640,16 +18736,18 @@ */ typedef struct DateTime DateTime; struct DateTime { - sqlite3_int64 iJD; /* The julian day number times 86400000 */ - int Y, M, D; /* Year, month, and day */ - int h, m; /* Hour and minutes */ - int tz; /* Timezone offset in minutes */ - double s; /* Seconds */ - char validYMD; /* True (1) if Y,M,D are valid */ - char validHMS; /* True (1) if h,m,s are valid */ - char validJD; /* True (1) if iJD is valid */ - char validTZ; /* True (1) if tz is valid */ - char tzSet; /* Timezone was set explicitly */ + sqlite3_int64 iJD; /* The julian day number times 86400000 */ + int Y, M, D; /* Year, month, and day */ + int h, m; /* Hour and minutes */ + int tz; /* Timezone offset in minutes */ + double s; /* Seconds */ + char validJD; /* True (1) if iJD is valid */ + char rawS; /* Raw numeric value stored in s */ + char validYMD; /* True (1) if Y,M,D are valid */ + char validHMS; /* True (1) if h,m,s are valid */ + char validTZ; /* True (1) if tz is valid */ + char tzSet; /* Timezone was set explicitly */ + char isError; /* An overflow has occurred */ }; @@ -18797,6 +18895,7 @@ s = 0; } p->validJD = 0; + p->rawS = 0; p->validHMS = 1; p->h = h; p->m = m; @@ -18807,6 +18906,14 @@ } /* +** Put the DateTime object into its error state. +*/ +static void datetimeError(DateTime *p){ + memset(p, 0, sizeof(*p)); + p->isError = 1; +} + +/* ** Convert from YYYY-MM-DD HH:MM:SS to julian day. We always assume ** that the YYYY-MM-DD is according to the Gregorian calendar. ** @@ -18825,6 +18932,10 @@ M = 1; D = 1; } + if( Y<-4713 || Y>9999 || p->rawS ){ + datetimeError(p); + return; + } if( M<=2 ){ Y--; M += 12; @@ -18906,6 +19017,21 @@ } /* +** Input "r" is a numeric quantity which might be a julian day number, +** or the number of seconds since 1970. If the value if r is within +** range of a julian day number, install it as such and set validJD. +** If the value is a valid unix timestamp, put it in p->s and set p->rawS. +*/ +static void setRawDateNumber(DateTime *p, double r){ + p->s = r; + p->rawS = 1; + if( r>=0.0 && r<5373484.5 ){ + p->iJD = (sqlite3_int64)(r*86400000.0 + 0.5); + p->validJD = 1; + } +} + +/* ** Attempt to parse the given string into a julian day number. Return ** the number of errors. ** @@ -18934,14 +19060,31 @@ }else if( sqlite3StrICmp(zDate,"now")==0){ return setDateTimeToCurrent(context, p); }else if( sqlite3AtoF(zDate, &r, sqlite3Strlen30(zDate), SQLITE_UTF8) ){ - p->iJD = (sqlite3_int64)(r*86400000.0 + 0.5); - p->validJD = 1; + setRawDateNumber(p, r); return 0; } return 1; } +/* The julian day number for 9999-12-31 23:59:59.999 is 5373484.4999999. +** Multiplying this by 86400000 gives 464269060799999 as the maximum value +** for DateTime.iJD. +** +** But some older compilers (ex: gcc 4.2.1 on older Macs) cannot deal with +** such a large integer literal, so we have to encode it. +*/ +#define INT_464269060799999 ((((i64)0x1a640)<<32)|0x1072fdff) + /* +** Return TRUE if the given julian day number is within range. +** +** The input is the JulianDay times 86400000. +*/ +static int validJulianDay(sqlite3_int64 iJD){ + return iJD>=0 && iJD<=INT_464269060799999; +} + +/* ** Compute the Year, Month, and Day from the julian day number. */ static void computeYMD(DateTime *p){ @@ -18952,6 +19095,7 @@ p->M = 1; p->D = 1; }else{ + assert( validJulianDay(p->iJD) ); Z = (int)((p->iJD + 43200000)/86400000); A = (int)((Z - 1867216.25)/36524.25); A = Z + 1 + A - (A/4); @@ -18982,6 +19126,7 @@ s -= p->h*3600; p->m = s/60; p->s += s - p->m*60; + p->rawS = 0; p->validHMS = 1; } @@ -19043,14 +19188,14 @@ #endif sqlite3_mutex_enter(mutex); pX = localtime(t); -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE if( sqlite3GlobalConfig.bLocaltimeFault ) pX = 0; #endif if( pX ) *pTm = *pX; sqlite3_mutex_leave(mutex); rc = pX==0; #else -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE if( sqlite3GlobalConfig.bLocaltimeFault ) return 1; #endif #if HAVE_LOCALTIME_R @@ -19121,14 +19266,39 @@ y.validYMD = 1; y.validHMS = 1; y.validJD = 0; + y.rawS = 0; y.validTZ = 0; + y.isError = 0; computeJD(&y); *pRc = SQLITE_OK; return y.iJD - x.iJD; } #endif /* SQLITE_OMIT_LOCALTIME */ /* +** The following table defines various date transformations of the form +** +** 'NNN days' +** +** Where NNN is an arbitrary floating-point number and "days" can be one +** of several units of time. +*/ +static const struct { + u8 eType; /* Transformation type code */ + u8 nName; /* Length of th name */ + char *zName; /* Name of the transformation */ + double rLimit; /* Maximum NNN value for this transform */ + double rXform; /* Constant used for this transform */ +} aXformType[] = { + { 0, 6, "second", 464269060800.0, 86400000.0/(24.0*60.0*60.0) }, + { 0, 6, "minute", 7737817680.0, 86400000.0/(24.0*60.0) }, + { 0, 4, "hour", 128963628.0, 86400000.0/24.0 }, + { 0, 3, "day", 5373485.0, 86400000.0 }, + { 1, 5, "month", 176546.0, 30.0*86400000.0 }, + { 2, 4, "year", 14713.0, 365.0*86400000.0 }, +}; + +/* ** Process a modifier to a date-time stamp. The modifiers are ** as follows: ** @@ -19152,25 +19322,23 @@ ** to context pCtx. If the error is an unrecognized modifier, no error is ** written to pCtx. */ -static int parseModifier(sqlite3_context *pCtx, const char *zMod, DateTime *p){ +static int parseModifier( + sqlite3_context *pCtx, /* Function context */ + const char *z, /* The text of the modifier */ + int n, /* Length of zMod in bytes */ + DateTime *p /* The date/time value to be modified */ +){ int rc = 1; - int n; double r; - char *z, zBuf[30]; - z = zBuf; - for(n=0; niJD += localtimeOffset(p, pCtx, &rc); clearYMD_HMS_TZ(p); @@ -19182,16 +19350,21 @@ /* ** unixepoch ** - ** Treat the current value of p->iJD as the number of + ** Treat the current value of p->s as the number of ** seconds since 1970. Convert to a real julian day number. */ - if( strcmp(z, "unixepoch")==0 && p->validJD ){ - p->iJD = (p->iJD + 43200)/86400 + 21086676*(i64)10000000; - clearYMD_HMS_TZ(p); - rc = 0; + if( sqlite3_stricmp(z, "unixepoch")==0 && p->rawS ){ + r = p->s*1000.0 + 210866760000000.0; + if( r>=0.0 && r<464269060800000.0 ){ + clearYMD_HMS_TZ(p); + p->iJD = (sqlite3_int64)r; + p->validJD = 1; + p->rawS = 0; + rc = 0; + } } #ifndef SQLITE_OMIT_LOCALTIME - else if( strcmp(z, "utc")==0 ){ + else if( sqlite3_stricmp(z, "utc")==0 ){ if( p->tzSet==0 ){ sqlite3_int64 c1; computeJD(p); @@ -19217,7 +19390,7 @@ ** weekday N where 0==Sunday, 1==Monday, and so forth. If the ** date is already on the appropriate weekday, this is a no-op. */ - if( strncmp(z, "weekday ", 8)==0 + if( sqlite3_strnicmp(z, "weekday ", 8)==0 && sqlite3AtoF(&z[8], &r, sqlite3Strlen30(&z[8]), SQLITE_UTF8) && (n=(int)r)==r && n>=0 && r<7 ){ sqlite3_int64 Z; @@ -19240,23 +19413,23 @@ ** Move the date backwards to the beginning of the current day, ** or month or year. */ - if( strncmp(z, "start of ", 9)!=0 ) break; + if( sqlite3_strnicmp(z, "start of ", 9)!=0 ) break; z += 9; computeYMD(p); p->validHMS = 1; p->h = p->m = 0; p->s = 0.0; p->validTZ = 0; p->validJD = 0; - if( strcmp(z,"month")==0 ){ + if( sqlite3_stricmp(z,"month")==0 ){ p->D = 1; rc = 0; - }else if( strcmp(z,"year")==0 ){ + }else if( sqlite3_stricmp(z,"year")==0 ){ computeYMD(p); p->M = 1; p->D = 1; rc = 0; - }else if( strcmp(z,"day")==0 ){ + }else if( sqlite3_stricmp(z,"day")==0 ){ rc = 0; } break; @@ -19274,6 +19447,7 @@ case '8': case '9': { double rRounder; + int i; for(n=1; z[n] && z[n]!=':' && !sqlite3Isspace(z[n]); n++){} if( !sqlite3AtoF(z, &r, n, SQLITE_UTF8) ){ rc = 1; @@ -19302,46 +19476,48 @@ rc = 0; break; } + + /* If control reaches this point, it means the transformation is + ** one of the forms like "+NNN days". */ z += n; while( sqlite3Isspace(*z) ) z++; n = sqlite3Strlen30(z); if( n>10 || n<3 ) break; - if( z[n-1]=='s' ){ z[n-1] = 0; n--; } + if( sqlite3UpperToLower[(u8)z[n-1]]=='s' ) n--; computeJD(p); - rc = 0; + rc = 1; rRounder = r<0 ? -0.5 : +0.5; - if( n==3 && strcmp(z,"day")==0 ){ - p->iJD += (sqlite3_int64)(r*86400000.0 + rRounder); - }else if( n==4 && strcmp(z,"hour")==0 ){ - p->iJD += (sqlite3_int64)(r*(86400000.0/24.0) + rRounder); - }else if( n==6 && strcmp(z,"minute")==0 ){ - p->iJD += (sqlite3_int64)(r*(86400000.0/(24.0*60.0)) + rRounder); - }else if( n==6 && strcmp(z,"second")==0 ){ - p->iJD += (sqlite3_int64)(r*(86400000.0/(24.0*60.0*60.0)) + rRounder); - }else if( n==5 && strcmp(z,"month")==0 ){ - int x, y; - computeYMD_HMS(p); - p->M += (int)r; - x = p->M>0 ? (p->M-1)/12 : (p->M-12)/12; - p->Y += x; - p->M -= x*12; - p->validJD = 0; - computeJD(p); - y = (int)r; - if( y!=r ){ - p->iJD += (sqlite3_int64)((r - y)*30.0*86400000.0 + rRounder); + for(i=0; i-aXformType[i].rLimit && rM += (int)r; + x = p->M>0 ? (p->M-1)/12 : (p->M-12)/12; + p->Y += x; + p->M -= x*12; + p->validJD = 0; + r -= (int)r; + break; + } + case 2: { /* Special processing to add years */ + int y = (int)r; + computeYMD_HMS(p); + p->Y += y; + p->validJD = 0; + r -= (int)r; + break; + } + } + computeJD(p); + p->iJD += (sqlite3_int64)(r*aXformType[i].rXform + rRounder); + rc = 0; + break; } - }else if( n==4 && strcmp(z,"year")==0 ){ - int y = (int)r; - computeYMD_HMS(p); - p->Y += y; - p->validJD = 0; - computeJD(p); - if( y!=r ){ - p->iJD += (sqlite3_int64)((r - y)*365.0*86400000.0 + rRounder); - } - }else{ - rc = 1; } clearYMD_HMS_TZ(p); break; @@ -19368,7 +19544,7 @@ sqlite3_value **argv, DateTime *p ){ - int i; + int i, n; const unsigned char *z; int eType; memset(p, 0, sizeof(*p)); @@ -19377,8 +19553,7 @@ } if( (eType = sqlite3_value_type(argv[0]))==SQLITE_FLOAT || eType==SQLITE_INTEGER ){ - p->iJD = (sqlite3_int64)(sqlite3_value_double(argv[0])*86400000.0 + 0.5); - p->validJD = 1; + setRawDateNumber(p, sqlite3_value_double(argv[0])); }else{ z = sqlite3_value_text(argv[0]); if( !z || parseDateOrTime(context, (char*)z, p) ){ @@ -19387,8 +19562,11 @@ } for(i=1; iisError || !validJulianDay(p->iJD) ) return 1; return 0; } @@ -20186,7 +20364,7 @@ /* #include "sqliteInt.h" */ -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE /* ** Global variables. @@ -20244,7 +20422,7 @@ } } -#endif /* #ifndef SQLITE_OMIT_BUILTIN_TEST */ +#endif /* #ifndef SQLITE_UNTESTABLE */ /************** End of fault.c ***********************************************/ /************** Begin file mem0.c ********************************************/ @@ -24403,7 +24581,7 @@ sqlite3_mutex_enter(mem0.mutex); sqlite3StatusHighwater(SQLITE_STATUS_MALLOC_SIZE, (int)nBytes); nDiff = nNew - nOld; - if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED) >= + if( nDiff>0 && sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED) >= mem0.alarmThreshold-nDiff ){ sqlite3MallocAlarm(nDiff); } @@ -24610,9 +24788,8 @@ if( z==0 ){ return 0; } - n = sqlite3Strlen30(z) + 1; - assert( (n&0x7fffffff)==n ); - zNew = sqlite3DbMallocRaw(db, (int)n); + n = strlen(z) + 1; + zNew = sqlite3DbMallocRaw(db, n); if( zNew ){ memcpy(zNew, z, n); } @@ -25552,7 +25729,7 @@ assert( p->accError==0 || p->nAlloc==0 ); if( p->nChar+N >= p->nAlloc ){ enlargeAndAppend(p,z,N); - }else{ + }else if( N ){ assert( p->zText ); p->nChar += N; memcpy(&p->zText[p->nChar-N], z, N); @@ -25572,18 +25749,23 @@ ** Return a pointer to the resulting string. Return a NULL ** pointer if any kind of error was encountered. */ +static SQLITE_NOINLINE char *strAccumFinishRealloc(StrAccum *p){ + assert( p->mxAlloc>0 && !isMalloced(p) ); + p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); + if( p->zText ){ + memcpy(p->zText, p->zBase, p->nChar+1); + p->printfFlags |= SQLITE_PRINTF_MALLOCED; + }else{ + setStrAccumError(p, STRACCUM_NOMEM); + } + return p->zText; +} SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum *p){ if( p->zText ){ assert( (p->zText==p->zBase)==!isMalloced(p) ); p->zText[p->nChar] = 0; if( p->mxAlloc>0 && !isMalloced(p) ){ - p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); - if( p->zText ){ - memcpy(p->zText, p->zBase, p->nChar+1); - p->printfFlags |= SQLITE_PRINTF_MALLOCED; - }else{ - setStrAccumError(p, STRACCUM_NOMEM); - } + return strAccumFinishRealloc(p); } } return p->zText; @@ -25723,7 +25905,8 @@ #endif sqlite3StrAccumInit(&acc, 0, zBuf, n, 0); sqlite3VXPrintf(&acc, zFormat, ap); - return sqlite3StrAccumFinish(&acc); + zBuf[acc.nChar] = 0; + return zBuf; } SQLITE_API char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){ char *z; @@ -25871,6 +26054,7 @@ va_start(ap, zFormat); sqlite3VXPrintf(&acc, zFormat, ap); va_end(ap); + assert( acc.nChar>0 ); if( zBuf[acc.nChar-1]!='\n' ) sqlite3StrAccumAppend(&acc, "\n", 1); sqlite3StrAccumFinish(&acc); fprintf(stdout,"%s", zBuf); @@ -26431,7 +26615,7 @@ sqlite3_mutex_leave(mutex); } -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE /* ** For testing purposes, we sometimes want to preserve the state of ** PRNG and restore the PRNG to its saved state at a later time, or @@ -26456,7 +26640,7 @@ sizeof(sqlite3Prng) ); } -#endif /* SQLITE_OMIT_BUILTIN_TEST */ +#endif /* SQLITE_UNTESTABLE */ /************** End of random.c **********************************************/ /************** Begin file threads.c *****************************************/ @@ -27314,7 +27498,7 @@ ** Return whatever integer value the test callback returns, or return ** SQLITE_OK if no test callback is installed. */ -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE SQLITE_PRIVATE int sqlite3FaultSim(int iTest){ int (*xCallback)(int) = sqlite3GlobalConfig.xTestCallback; return xCallback ? xCallback(iTest) : SQLITE_OK; @@ -28726,6 +28910,109 @@ } #endif /* defined SCANSTAT or STAT4 or ESTIMATED_ROWS */ +/* +** Add a new name/number pair to a VList. This might require that the +** VList object be reallocated, so return the new VList. If an OOM +** error occurs, the original VList returned and the +** db->mallocFailed flag is set. +** +** A VList is really just an array of integers. To destroy a VList, +** simply pass it to sqlite3DbFree(). +** +** The first integer is the number of integers allocated for the whole +** VList. The second integer is the number of integers actually used. +** Each name/number pair is encoded by subsequent groups of 3 or more +** integers. +** +** Each name/number pair starts with two integers which are the numeric +** value for the pair and the size of the name/number pair, respectively. +** The text name overlays one or more following integers. The text name +** is always zero-terminated. +** +** Conceptually: +** +** struct VList { +** int nAlloc; // Number of allocated slots +** int nUsed; // Number of used slots +** struct VListEntry { +** int iValue; // Value for this entry +** int nSlot; // Slots used by this entry +** // ... variable name goes here +** } a[0]; +** } +** +** During code generation, pointers to the variable names within the +** VList are taken. When that happens, nAlloc is set to zero as an +** indication that the VList may never again be enlarged, since the +** accompanying realloc() would invalidate the pointers. +*/ +SQLITE_PRIVATE VList *sqlite3VListAdd( + sqlite3 *db, /* The database connection used for malloc() */ + VList *pIn, /* The input VList. Might be NULL */ + const char *zName, /* Name of symbol to add */ + int nName, /* Bytes of text in zName */ + int iVal /* Value to associate with zName */ +){ + int nInt; /* number of sizeof(int) objects needed for zName */ + char *z; /* Pointer to where zName will be stored */ + int i; /* Index in pIn[] where zName is stored */ + + nInt = nName/4 + 3; + assert( pIn==0 || pIn[0]>=3 ); /* Verify ok to add new elements */ + if( pIn==0 || pIn[1]+nInt > pIn[0] ){ + /* Enlarge the allocation */ + int nAlloc = (pIn ? pIn[0]*2 : 10) + nInt; + VList *pOut = sqlite3DbRealloc(db, pIn, nAlloc*sizeof(int)); + if( pOut==0 ) return pIn; + if( pIn==0 ) pOut[1] = 2; + pIn = pOut; + pIn[0] = nAlloc; + } + i = pIn[1]; + pIn[i] = iVal; + pIn[i+1] = nInt; + z = (char*)&pIn[i+2]; + pIn[1] = i+nInt; + assert( pIn[1]<=pIn[0] ); + memcpy(z, zName, nName); + z[nName] = 0; + return pIn; +} + +/* +** Return a pointer to the name of a variable in the given VList that +** has the value iVal. Or return a NULL if there is no such variable in +** the list +*/ +SQLITE_PRIVATE const char *sqlite3VListNumToName(VList *pIn, int iVal){ + int i, mx; + if( pIn==0 ) return 0; + mx = pIn[1]; + i = 2; + do{ + if( pIn[i]==iVal ) return (char*)&pIn[i+2]; + i += pIn[i+1]; + }while( i0 then r[P1]-=P3, goto P2"), - /* 67 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]-=P3, goto P2"), + /* 67 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]--, goto P2"), /* 68 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"), /* 69 */ "IncrVacuum" OpHelp(""), /* 70 */ "VNext" OpHelp(""), @@ -29135,48 +29422,47 @@ /* 118 */ "ResetCount" OpHelp(""), /* 119 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"), /* 120 */ "SorterData" OpHelp("r[P2]=data"), - /* 121 */ "RowKey" OpHelp("r[P2]=key"), - /* 122 */ "RowData" OpHelp("r[P2]=data"), - /* 123 */ "Rowid" OpHelp("r[P2]=rowid"), - /* 124 */ "NullRow" OpHelp(""), - /* 125 */ "SorterInsert" OpHelp(""), - /* 126 */ "IdxInsert" OpHelp("key=r[P2]"), - /* 127 */ "IdxDelete" OpHelp("key=r[P2@P3]"), - /* 128 */ "Seek" OpHelp("Move P3 to P1.rowid"), - /* 129 */ "IdxRowid" OpHelp("r[P2]=rowid"), - /* 130 */ "Destroy" OpHelp(""), - /* 131 */ "Clear" OpHelp(""), + /* 121 */ "RowData" OpHelp("r[P2]=data"), + /* 122 */ "Rowid" OpHelp("r[P2]=rowid"), + /* 123 */ "NullRow" OpHelp(""), + /* 124 */ "SorterInsert" OpHelp("key=r[P2]"), + /* 125 */ "IdxInsert" OpHelp("key=r[P2]"), + /* 126 */ "IdxDelete" OpHelp("key=r[P2@P3]"), + /* 127 */ "Seek" OpHelp("Move P3 to P1.rowid"), + /* 128 */ "IdxRowid" OpHelp("r[P2]=rowid"), + /* 129 */ "Destroy" OpHelp(""), + /* 130 */ "Clear" OpHelp(""), + /* 131 */ "ResetSorter" OpHelp(""), /* 132 */ "Real" OpHelp("r[P2]=P4"), - /* 133 */ "ResetSorter" OpHelp(""), - /* 134 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"), - /* 135 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"), - /* 136 */ "ParseSchema" OpHelp(""), - /* 137 */ "LoadAnalysis" OpHelp(""), - /* 138 */ "DropTable" OpHelp(""), - /* 139 */ "DropIndex" OpHelp(""), - /* 140 */ "DropTrigger" OpHelp(""), - /* 141 */ "IntegrityCk" OpHelp(""), - /* 142 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), - /* 143 */ "Param" OpHelp(""), - /* 144 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), - /* 145 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), - /* 146 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"), - /* 147 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"), - /* 148 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"), - /* 149 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), - /* 150 */ "Expire" OpHelp(""), - /* 151 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), - /* 152 */ "VBegin" OpHelp(""), - /* 153 */ "VCreate" OpHelp(""), - /* 154 */ "VDestroy" OpHelp(""), - /* 155 */ "VOpen" OpHelp(""), - /* 156 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), - /* 157 */ "VRename" OpHelp(""), - /* 158 */ "Pagecount" OpHelp(""), - /* 159 */ "MaxPgcnt" OpHelp(""), - /* 160 */ "CursorHint" OpHelp(""), - /* 161 */ "Noop" OpHelp(""), - /* 162 */ "Explain" OpHelp(""), + /* 133 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"), + /* 134 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"), + /* 135 */ "ParseSchema" OpHelp(""), + /* 136 */ "LoadAnalysis" OpHelp(""), + /* 137 */ "DropTable" OpHelp(""), + /* 138 */ "DropIndex" OpHelp(""), + /* 139 */ "DropTrigger" OpHelp(""), + /* 140 */ "IntegrityCk" OpHelp(""), + /* 141 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), + /* 142 */ "Param" OpHelp(""), + /* 143 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), + /* 144 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), + /* 145 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"), + /* 146 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"), + /* 147 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"), + /* 148 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), + /* 149 */ "Expire" OpHelp(""), + /* 150 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), + /* 151 */ "VBegin" OpHelp(""), + /* 152 */ "VCreate" OpHelp(""), + /* 153 */ "VDestroy" OpHelp(""), + /* 154 */ "VOpen" OpHelp(""), + /* 155 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), + /* 156 */ "VRename" OpHelp(""), + /* 157 */ "Pagecount" OpHelp(""), + /* 158 */ "MaxPgcnt" OpHelp(""), + /* 159 */ "CursorHint" OpHelp(""), + /* 160 */ "Noop" OpHelp(""), + /* 161 */ "Explain" OpHelp(""), }; return azName[i]; } @@ -30445,7 +30731,14 @@ #if OS_VXWORKS struct vxworksFileId *pId; /* Unique file ID for vxworks. */ #else - ino_t ino; /* Inode number */ + /* We are told that some versions of Android contain a bug that + ** sizes ino_t at only 32-bits instead of 64-bits. (See + ** https://android-review.googlesource.com/#/c/115351/3/dist/sqlite3.c) + ** To work around this, always allocate 64-bits for the inode number. + ** On small machines that only have 32-bit inodes, this wastes 4 bytes, + ** but that should not be a big deal. */ + /* WAS: ino_t ino; */ + u64 ino; /* Inode number */ #endif }; @@ -30690,7 +30983,7 @@ #if OS_VXWORKS fileId.pId = pFile->pId; #else - fileId.ino = statbuf.st_ino; + fileId.ino = (u64)statbuf.st_ino; #endif pInode = inodeList; while( pInode && memcmp(&fileId, &pInode->fileId, sizeof(fileId)) ){ @@ -30724,7 +31017,8 @@ #else struct stat buf; return pFile->pInode!=0 && - (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino); + (osStat(pFile->zPath, &buf)!=0 + || (u64)buf.st_ino!=pFile->pInode->fileId.ino); #endif } @@ -34896,7 +35190,7 @@ unixEnterMutex(); pInode = inodeList; while( pInode && (pInode->fileId.dev!=sStat.st_dev - || pInode->fileId.ino!=sStat.st_ino) ){ + || pInode->fileId.ino!=(u64)sStat.st_ino) ){ pInode = pInode->pNext; } if( pInode ){ @@ -43457,7 +43751,7 @@ return p->iSize; } -#ifndef SQLITE_OMIT_BUILTIN_TEST +#ifndef SQLITE_UNTESTABLE /* ** Let V[] be an array of unsigned characters sufficient to hold ** up to N bits. Let I be an integer between 0 and N. 0<=Ipgno>0 ); /* Page number is 1 or more */ + assert( pPg->pgno>0 || pPg->pPager==0 ); /* Page number is 1 or more */ pCache = pPg->pCache; assert( pCache!=0 ); /* Every page has an associated PCache */ if( pPg->flags & PGHDR_CLEAN ){ @@ -43862,6 +44156,12 @@ ** has already been allocated and is passed in as the p pointer. ** The caller discovers how much space needs to be allocated by ** calling sqlite3PcacheSize(). +** +** szExtra is some extra space allocated for each page. The first +** 8 bytes of the extra space will be zeroed as the page is allocated, +** but remaining content will be uninitialized. Though it is opaque +** to this module, the extra space really ends up being the MemPage +** structure in the pager. */ SQLITE_PRIVATE int sqlite3PcacheOpen( int szPage, /* Size of every page */ @@ -43874,6 +44174,7 @@ memset(p, 0, sizeof(PCache)); p->szPage = 1; p->szExtra = szExtra; + assert( szExtra>=8 ); /* First 8 bytes will be zeroed */ p->bPurgeable = bPurgeable; p->eCreate = 2; p->xStress = xStress; @@ -43943,7 +44244,6 @@ assert( pCache!=0 ); assert( pCache->pCache!=0 ); assert( createFlag==3 || createFlag==0 ); - assert( pgno>0 ); assert( pCache->eCreate==((pCache->bPurgeable && pCache->pDirty) ? 1 : 2) ); /* eCreate defines what to do if the page does not exist. @@ -44043,7 +44343,7 @@ pPgHdr->pPage = pPage; pPgHdr->pData = pPage->pBuf; pPgHdr->pExtra = (void *)&pPgHdr[1]; - memset(pPgHdr->pExtra, 0, pCache->szExtra); + memset(pPgHdr->pExtra, 0, 8); pPgHdr->pCache = pCache; pPgHdr->pgno = pgno; pPgHdr->flags = PGHDR_CLEAN; @@ -46267,7 +46567,7 @@ #ifdef SQLITE_OMIT_WAL # define sqlite3WalOpen(x,y,z) 0 # define sqlite3WalLimit(x,y) -# define sqlite3WalClose(w,x,y,z) 0 +# define sqlite3WalClose(v,w,x,y,z) 0 # define sqlite3WalBeginReadTransaction(y,z) 0 # define sqlite3WalEndReadTransaction(z) # define sqlite3WalDbsize(y) 0 @@ -46277,7 +46577,7 @@ # define sqlite3WalSavepoint(y,z) # define sqlite3WalSavepointUndo(y,z) 0 # define sqlite3WalFrames(u,v,w,x,y,z) 0 -# define sqlite3WalCheckpoint(r,s,t,u,v,w,x,y,z) 0 +# define sqlite3WalCheckpoint(q,r,s,t,u,v,w,x,y,z) 0 # define sqlite3WalCallback(z) 0 # define sqlite3WalExclusiveMode(y,z) 0 # define sqlite3WalHeapMemory(z) 0 @@ -46295,7 +46595,7 @@ /* Open and close a connection to a write-ahead log. */ SQLITE_PRIVATE int sqlite3WalOpen(sqlite3_vfs*, sqlite3_file*, const char *, int, i64, Wal**); -SQLITE_PRIVATE int sqlite3WalClose(Wal *pWal, int sync_flags, int, u8 *); +SQLITE_PRIVATE int sqlite3WalClose(Wal *pWal, sqlite3*, int sync_flags, int, u8 *); /* Set the limiting size of a WAL file. */ SQLITE_PRIVATE void sqlite3WalLimit(Wal*, i64); @@ -46338,6 +46638,7 @@ /* Copy pages from the log to the database file */ SQLITE_PRIVATE int sqlite3WalCheckpoint( Wal *pWal, /* Write-ahead log connection */ + sqlite3 *db, /* Check this handle's interrupt flag */ int eMode, /* One of PASSIVE, FULL and RESTART */ int (*xBusy)(void*), /* Function to call when busy */ void *pBusyArg, /* Context argument for xBusyHandler */ @@ -46369,6 +46670,7 @@ #ifdef SQLITE_ENABLE_SNAPSHOT SQLITE_PRIVATE int sqlite3WalSnapshotGet(Wal *pWal, sqlite3_snapshot **ppSnapshot); SQLITE_PRIVATE void sqlite3WalSnapshotOpen(Wal *pWal, sqlite3_snapshot *pSnapshot); +SQLITE_PRIVATE int sqlite3WalSnapshotRecover(Wal *pWal); #endif #ifdef SQLITE_ENABLE_ZIPVFS @@ -47058,6 +47360,7 @@ int nRead; /* Database pages read */ #endif void (*xReiniter)(DbPage*); /* Call this routine when reloading pages */ + int (*xGet)(Pager*,Pgno,DbPage**,int); /* Routine to fetch a patch */ #ifdef SQLITE_HAS_CODEC void *(*xCodec)(void*,void*,Pgno,int); /* Routine for en/decoding data */ void (*xCodecSizeChng)(void*,int,int); /* Notify of page size changes */ @@ -47384,7 +47687,34 @@ } #endif +/* Forward references to the various page getters */ +static int getPageNormal(Pager*,Pgno,DbPage**,int); +static int getPageError(Pager*,Pgno,DbPage**,int); +#if SQLITE_MAX_MMAP_SIZE>0 +static int getPageMMap(Pager*,Pgno,DbPage**,int); +#endif + /* +** Set the Pager.xGet method for the appropriate routine used to fetch +** content from the pager. +*/ +static void setGetterMethod(Pager *pPager){ + if( pPager->errCode ){ + pPager->xGet = getPageError; +#if SQLITE_MAX_MMAP_SIZE>0 + }else if( USEFETCH(pPager) +#ifdef SQLITE_HAS_CODEC + && pPager->xCodec==0 +#endif + ){ + pPager->xGet = getPageMMap; +#endif /* SQLITE_MAX_MMAP_SIZE>0 */ + }else{ + pPager->xGet = getPageNormal; + } +} + +/* ** Return true if it is necessary to write page *pPg into the sub-journal. ** A page needs to be written into the sub-journal if there exists one ** or more open savepoints for which: @@ -48198,6 +48528,7 @@ } if( USEFETCH(pPager) ) sqlite3OsUnfetch(pPager->fd, 0, 0); pPager->errCode = SQLITE_OK; + setGetterMethod(pPager); } pPager->journalOff = 0; @@ -48235,6 +48566,7 @@ if( rc2==SQLITE_FULL || rc2==SQLITE_IOERR ){ pPager->errCode = rc; pPager->eState = PAGER_ERROR; + setGetterMethod(pPager); } return rc; } @@ -48403,7 +48735,7 @@ pPager->pInJournal = 0; pPager->nRec = 0; if( rc==SQLITE_OK ){ - if( pagerFlushOnCommit(pPager, bCommit) ){ + if( MEMDB || pagerFlushOnCommit(pPager, bCommit) ){ sqlite3PcacheCleanAll(pPager->pPCache); }else{ sqlite3PcacheClearWritable(pPager->pPCache); @@ -49802,6 +50134,7 @@ sqlite3_int64 sz; sz = pPager->szMmap; pPager->bUseFetch = (sz>0); + setGetterMethod(pPager); sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_MMAP_SIZE, &sz); } #endif @@ -50298,6 +50631,7 @@ return rc; } +#if SQLITE_MAX_MMAP_SIZE>0 /* ** Obtain a reference to a memory mapped page object for page number pgno. ** The new object will use the pointer pData, obtained from xFetch(). @@ -50320,7 +50654,8 @@ *ppPage = p = pPager->pMmapFreelist; pPager->pMmapFreelist = p->pDirty; p->pDirty = 0; - memset(p->pExtra, 0, pPager->nExtra); + assert( pPager->nExtra>=8 ); + memset(p->pExtra, 0, 8); }else{ *ppPage = p = (PgHdr *)sqlite3MallocZero(sizeof(PgHdr) + pPager->nExtra); if( p==0 ){ @@ -50345,6 +50680,7 @@ return SQLITE_OK; } +#endif /* ** Release a reference to page pPg. pPg must have been returned by an @@ -50387,17 +50723,21 @@ ** a hot journal may be left in the filesystem but no error is returned ** to the caller. */ -SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager){ +SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3 *db){ u8 *pTmp = (u8 *)pPager->pTmpSpace; + assert( db || pagerUseWal(pPager)==0 ); assert( assert_pager_state(pPager) ); disable_simulated_io_errors(); sqlite3BeginBenignMalloc(); pagerFreeMapHdrs(pPager); /* pPager->errCode = 0; */ pPager->exclusiveMode = 0; #ifndef SQLITE_OMIT_WAL - sqlite3WalClose(pPager->pWal, pPager->ckptSyncFlags, pPager->pageSize, pTmp); + assert( db || pPager->pWal==0 ); + sqlite3WalClose(pPager->pWal, db, pPager->ckptSyncFlags, pPager->pageSize, + (db && (db->flags & SQLITE_NoCkptOnClose) ? 0 : pTmp) + ); pPager->pWal = 0; #endif pager_reset(pPager); @@ -50916,7 +51256,9 @@ ** ** The nExtra parameter specifies the number of bytes of space allocated ** along with each page reference. This space is available to the user -** via the sqlite3PagerGetExtra() API. +** via the sqlite3PagerGetExtra() API. When a new page is allocated, the +** first 8 bytes of this space are zeroed but the remainder is uninitialized. +** (The extra space is used by btree as the MemPage object.) ** ** The flags argument is used to specify properties that affect the ** operation of the pager. It should be passed some bitwise combination @@ -51146,8 +51488,8 @@ /* Initialize the PCache object. */ if( rc==SQLITE_OK ){ - assert( nExtra<1000 ); nExtra = ROUND8(nExtra); + assert( nExtra>=8 && nExtra<1000 ); rc = sqlite3PcacheOpen(szPageDflt, nExtra, !memDb, !memDb?pagerStress:0, (void *)pPager, pPager->pPCache); } @@ -51212,6 +51554,7 @@ /* pPager->xBusyHandler = 0; */ /* pPager->pBusyHandlerArg = 0; */ pPager->xReiniter = xReinit; + setGetterMethod(pPager); /* memset(pPager->aHash, 0, sizeof(pPager->aHash)); */ /* pPager->szMmap = SQLITE_DEFAULT_MMAP_SIZE // will be set by btree.c */ @@ -51625,10 +51968,17 @@ } /* -** Acquire a reference to page number pgno in pager pPager (a page -** reference has type DbPage*). If the requested reference is +** The page getter methods each try to acquire a reference to a +** page with page number pgno. If the requested reference is ** successfully obtained, it is copied to *ppPage and SQLITE_OK returned. ** +** There are different implementations of the getter method depending +** on the current state of the pager. +** +** getPageNormal() -- The normal getter +** getPageError() -- Used if the pager is in an error state +** getPageMmap() -- Used if memory-mapped I/O is enabled +** ** If the requested page is already in the cache, it is returned. ** Otherwise, a new page object is allocated and populated with data ** read from the database file. In some cases, the pcache module may @@ -51640,23 +51990,23 @@ ** already in the cache when this function is called, then the extra ** data is left as it was when the page object was last used. ** -** If the database image is smaller than the requested page or if a -** non-zero value is passed as the noContent parameter and the +** If the database image is smaller than the requested page or if +** the flags parameter contains the PAGER_GET_NOCONTENT bit and the ** requested page is not already stored in the cache, then no ** actual disk read occurs. In this case the memory image of the ** page is initialized to all zeros. ** -** If noContent is true, it means that we do not care about the contents -** of the page. This occurs in two scenarios: +** If PAGER_GET_NOCONTENT is true, it means that we do not care about +** the contents of the page. This occurs in two scenarios: ** ** a) When reading a free-list leaf page from the database, and ** ** b) When a savepoint is being rolled back and we need to load ** a new page into the cache to be filled with the data read ** from the savepoint journal. ** -** If noContent is true, then the data returned is zeroed instead of -** being read from the database. Additionally, the bits corresponding +** If PAGER_GET_NOCONTENT is true, then the data returned is zeroed instead +** of being read from the database. Additionally, the bits corresponding ** to pgno in Pager.pInJournal (bitvec of pages already written to the ** journal file) and the PagerSavepoint.pInSavepoint bitvecs of any open ** savepoints are set. This means if the page is made writable at any @@ -51674,106 +52024,39 @@ ** Since Lookup() never goes to disk, it never has to deal with locks ** or journal files. */ -SQLITE_PRIVATE int sqlite3PagerGet( +static int getPageNormal( Pager *pPager, /* The pager open on the database file */ Pgno pgno, /* Page number to fetch */ DbPage **ppPage, /* Write a pointer to the page here */ int flags /* PAGER_GET_XXX flags */ ){ int rc = SQLITE_OK; - PgHdr *pPg = 0; - u32 iFrame = 0; /* Frame to read from WAL file */ - const int noContent = (flags & PAGER_GET_NOCONTENT); + PgHdr *pPg; + u8 noContent; /* True if PAGER_GET_NOCONTENT is set */ + sqlite3_pcache_page *pBase; - /* It is acceptable to use a read-only (mmap) page for any page except - ** page 1 if there is no write-transaction open or the ACQUIRE_READONLY - ** flag was specified by the caller. And so long as the db is not a - ** temporary or in-memory database. */ - const int bMmapOk = (pgno>1 && USEFETCH(pPager) - && (pPager->eState==PAGER_READER || (flags & PAGER_GET_READONLY)) -#ifdef SQLITE_HAS_CODEC - && pPager->xCodec==0 -#endif - ); - - /* Optimization note: Adding the "pgno<=1" term before "pgno==0" here - ** allows the compiler optimizer to reuse the results of the "pgno>1" - ** test in the previous statement, and avoid testing pgno==0 in the - ** common case where pgno is large. */ - if( pgno<=1 && pgno==0 ){ - return SQLITE_CORRUPT_BKPT; - } + assert( pPager->errCode==SQLITE_OK ); assert( pPager->eState>=PAGER_READER ); assert( assert_pager_state(pPager) ); - assert( noContent==0 || bMmapOk==0 ); - assert( pPager->hasHeldSharedLock==1 ); - /* If the pager is in the error state, return an error immediately. - ** Otherwise, request the page from the PCache layer. */ - if( pPager->errCode!=SQLITE_OK ){ - rc = pPager->errCode; - }else{ - if( bMmapOk && pagerUseWal(pPager) ){ - rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame); - if( rc!=SQLITE_OK ) goto pager_acquire_err; + if( pgno==0 ) return SQLITE_CORRUPT_BKPT; + pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3); + if( pBase==0 ){ + pPg = 0; + rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase); + if( rc!=SQLITE_OK ) goto pager_acquire_err; + if( pBase==0 ){ + rc = SQLITE_NOMEM_BKPT; + goto pager_acquire_err; } - - if( bMmapOk && iFrame==0 ){ - void *pData = 0; - - rc = sqlite3OsFetch(pPager->fd, - (i64)(pgno-1) * pPager->pageSize, pPager->pageSize, &pData - ); - - if( rc==SQLITE_OK && pData ){ - if( pPager->eState>PAGER_READER || pPager->tempFile ){ - pPg = sqlite3PagerLookup(pPager, pgno); - } - if( pPg==0 ){ - rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg); - }else{ - sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData); - } - if( pPg ){ - assert( rc==SQLITE_OK ); - *ppPage = pPg; - return SQLITE_OK; - } - } - if( rc!=SQLITE_OK ){ - goto pager_acquire_err; - } - } - - { - sqlite3_pcache_page *pBase; - pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3); - if( pBase==0 ){ - rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase); - if( rc!=SQLITE_OK ) goto pager_acquire_err; - if( pBase==0 ){ - pPg = *ppPage = 0; - rc = SQLITE_NOMEM_BKPT; - goto pager_acquire_err; - } - } - pPg = *ppPage = sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pBase); - assert( pPg!=0 ); - } } - - if( rc!=SQLITE_OK ){ - /* Either the call to sqlite3PcacheFetch() returned an error or the - ** pager was already in the error-state when this function was called. - ** Set pPg to 0 and jump to the exception handler. */ - pPg = 0; - goto pager_acquire_err; - } + pPg = *ppPage = sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pBase); assert( pPg==(*ppPage) ); assert( pPg->pgno==pgno ); assert( pPg->pPager==pPager || pPg->pPager==0 ); + noContent = (flags & PAGER_GET_NOCONTENT)!=0; if( pPg->pPager && !noContent ){ /* In this case the pcache already contains an initialized copy of ** the page. Return without further ado. */ @@ -51783,17 +52066,18 @@ }else{ /* The pager cache has created a new page. Its content needs to - ** be initialized. */ - - pPg->pPager = pPager; - - /* The maximum page number is 2^31. Return SQLITE_CORRUPT if a page - ** number greater than this, or the unused locking-page, is requested. */ + ** be initialized. But first some error checks: + ** + ** (1) The maximum page number is 2^31 + ** (2) Never try to fetch the locking page + */ if( pgno>PAGER_MAX_PGNO || pgno==PAGER_MJ_PGNO(pPager) ){ rc = SQLITE_CORRUPT_BKPT; goto pager_acquire_err; } + pPg->pPager = pPager; + assert( !isOpen(pPager->fd) || !MEMDB ); if( !isOpen(pPager->fd) || pPager->dbSizepPager->mxPgno ){ @@ -51819,7 +52103,8 @@ memset(pPg->pData, 0, pPager->pageSize); IOTRACE(("ZERO %p %d\n", pPager, pgno)); }else{ - if( pagerUseWal(pPager) && bMmapOk==0 ){ + u32 iFrame = 0; /* Frame to read from WAL file */ + if( pagerUseWal(pPager) ){ rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame); if( rc!=SQLITE_OK ) goto pager_acquire_err; } @@ -51832,7 +52117,6 @@ } pager_set_pagehash(pPg); } - return SQLITE_OK; pager_acquire_err: @@ -51841,11 +52125,109 @@ sqlite3PcacheDrop(pPg); } pagerUnlockIfUnused(pPager); - *ppPage = 0; return rc; } +#if SQLITE_MAX_MMAP_SIZE>0 +/* The page getter for when memory-mapped I/O is enabled */ +static int getPageMMap( + Pager *pPager, /* The pager open on the database file */ + Pgno pgno, /* Page number to fetch */ + DbPage **ppPage, /* Write a pointer to the page here */ + int flags /* PAGER_GET_XXX flags */ +){ + int rc = SQLITE_OK; + PgHdr *pPg = 0; + u32 iFrame = 0; /* Frame to read from WAL file */ + + /* It is acceptable to use a read-only (mmap) page for any page except + ** page 1 if there is no write-transaction open or the ACQUIRE_READONLY + ** flag was specified by the caller. And so long as the db is not a + ** temporary or in-memory database. */ + const int bMmapOk = (pgno>1 + && (pPager->eState==PAGER_READER || (flags & PAGER_GET_READONLY)) + ); + + assert( USEFETCH(pPager) ); +#ifdef SQLITE_HAS_CODEC + assert( pPager->xCodec==0 ); +#endif + + /* Optimization note: Adding the "pgno<=1" term before "pgno==0" here + ** allows the compiler optimizer to reuse the results of the "pgno>1" + ** test in the previous statement, and avoid testing pgno==0 in the + ** common case where pgno is large. */ + if( pgno<=1 && pgno==0 ){ + return SQLITE_CORRUPT_BKPT; + } + assert( pPager->eState>=PAGER_READER ); + assert( assert_pager_state(pPager) ); + assert( pPager->hasHeldSharedLock==1 ); + assert( pPager->errCode==SQLITE_OK ); + + if( bMmapOk && pagerUseWal(pPager) ){ + rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame); + if( rc!=SQLITE_OK ){ + *ppPage = 0; + return rc; + } + } + if( bMmapOk && iFrame==0 ){ + void *pData = 0; + rc = sqlite3OsFetch(pPager->fd, + (i64)(pgno-1) * pPager->pageSize, pPager->pageSize, &pData + ); + if( rc==SQLITE_OK && pData ){ + if( pPager->eState>PAGER_READER || pPager->tempFile ){ + pPg = sqlite3PagerLookup(pPager, pgno); + } + if( pPg==0 ){ + rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg); + }else{ + sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData); + } + if( pPg ){ + assert( rc==SQLITE_OK ); + *ppPage = pPg; + return SQLITE_OK; + } + } + if( rc!=SQLITE_OK ){ + *ppPage = 0; + return rc; + } + } + return getPageNormal(pPager, pgno, ppPage, flags); +} +#endif /* SQLITE_MAX_MMAP_SIZE>0 */ + +/* The page getter method for when the pager is an error state */ +static int getPageError( + Pager *pPager, /* The pager open on the database file */ + Pgno pgno, /* Page number to fetch */ + DbPage **ppPage, /* Write a pointer to the page here */ + int flags /* PAGER_GET_XXX flags */ +){ + UNUSED_PARAMETER(pgno); + UNUSED_PARAMETER(flags); + assert( pPager->errCode!=SQLITE_OK ); + *ppPage = 0; + return pPager->errCode; +} + + +/* Dispatch all page fetch requests to the appropriate getter method. +*/ +SQLITE_PRIVATE int sqlite3PagerGet( + Pager *pPager, /* The pager open on the database file */ + Pgno pgno, /* Page number to fetch */ + DbPage **ppPage, /* Write a pointer to the page here */ + int flags /* PAGER_GET_XXX flags */ +){ + return pPager->xGet(pPager, pgno, ppPage, flags); +} + /* ** Acquire a page if it is already in the in-memory cache. Do ** not read the page from disk. Return a pointer to the page, @@ -52319,11 +52701,11 @@ assert( (pPg->flags & PGHDR_MMAP)==0 ); assert( pPager->eState>=PAGER_WRITER_LOCKED ); assert( assert_pager_state(pPager) ); - if( pPager->errCode ){ - return pPager->errCode; - }else if( (pPg->flags & PGHDR_WRITEABLE)!=0 && pPager->dbSize>=pPg->pgno ){ + if( (pPg->flags & PGHDR_WRITEABLE)!=0 && pPager->dbSize>=pPg->pgno ){ if( pPager->nSavepoint ) return subjournalPageIfRequired(pPg); return SQLITE_OK; + }else if( pPager->errCode ){ + return pPager->errCode; }else if( pPager->sectorSize > (u32)pPager->pageSize ){ assert( pPager->tempFile==0 ); return pagerWriteLargeSector(pPg); @@ -52818,6 +53200,7 @@ */ pPager->errCode = SQLITE_ABORT; pPager->eState = PAGER_ERROR; + setGetterMethod(pPager); return rc; } }else{ @@ -53079,6 +53462,7 @@ ){ pPager->errCode = SQLITE_ABORT; pPager->eState = PAGER_ERROR; + setGetterMethod(pPager); } #endif } @@ -53151,6 +53535,7 @@ pPager->xCodecSizeChng = xCodecSizeChng; pPager->xCodecFree = xCodecFree; pPager->pCodec = pCodec; + setGetterMethod(pPager); pagerReportSize(pPager); } SQLITE_PRIVATE void *sqlite3PagerGetCodec(Pager *pPager){ @@ -53560,10 +53945,16 @@ ** ** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART. */ -SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int eMode, int *pnLog, int *pnCkpt){ +SQLITE_PRIVATE int sqlite3PagerCheckpoint( + Pager *pPager, /* Checkpoint on this pager */ + sqlite3 *db, /* Db handle used to check for interrupts */ + int eMode, /* Type of checkpoint */ + int *pnLog, /* OUT: Final number of frames in log */ + int *pnCkpt /* OUT: Final number of checkpointed frames */ +){ int rc = SQLITE_OK; if( pPager->pWal ){ - rc = sqlite3WalCheckpoint(pPager->pWal, eMode, + rc = sqlite3WalCheckpoint(pPager->pWal, db, eMode, (eMode==SQLITE_CHECKPOINT_PASSIVE ? 0 : pPager->xBusyHandler), pPager->pBusyHandlerArg, pPager->ckptSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace, @@ -53695,7 +54086,7 @@ ** error (SQLITE_BUSY) is returned and the log connection is not closed. ** If successful, the EXCLUSIVE lock is not released before returning. */ -SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager){ +SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager, sqlite3 *db){ int rc = SQLITE_OK; assert( pPager->journalMode==PAGER_JOURNALMODE_WAL ); @@ -53723,7 +54114,7 @@ if( rc==SQLITE_OK && pPager->pWal ){ rc = pagerExclusiveLock(pPager); if( rc==SQLITE_OK ){ - rc = sqlite3WalClose(pPager->pWal, pPager->ckptSyncFlags, + rc = sqlite3WalClose(pPager->pWal, db, pPager->ckptSyncFlags, pPager->pageSize, (u8*)pPager->pTmpSpace); pPager->pWal = 0; pagerFixMaplimit(pPager); @@ -53760,6 +54151,20 @@ } return rc; } + +/* +** If this is a WAL database, call sqlite3WalSnapshotRecover(). If this +** is not a WAL database, return an error. +*/ +SQLITE_PRIVATE int sqlite3PagerSnapshotRecover(Pager *pPager){ + int rc; + if( pPager->pWal ){ + rc = sqlite3WalSnapshotRecover(pPager->pWal); + }else{ + rc = SQLITE_ERROR; + } + return rc; +} #endif /* SQLITE_ENABLE_SNAPSHOT */ #endif /* !SQLITE_OMIT_WAL */ @@ -55506,6 +55911,7 @@ */ static int walCheckpoint( Wal *pWal, /* Wal connection */ + sqlite3 *db, /* Check for interrupts on this handle */ int eMode, /* One of PASSIVE, FULL or RESTART */ int (*xBusy)(void*), /* Function to call when busy */ void *pBusyArg, /* Context argument for xBusyHandler */ @@ -55600,6 +56006,10 @@ while( rc==SQLITE_OK && 0==walIteratorNext(pIter, &iDbpage, &iFrame) ){ i64 iOffset; assert( walFramePgno(pWal, iFrame)==iDbpage ); + if( db->u1.isInterrupted ){ + rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_INTERRUPT; + break; + } if( iFrame<=nBackfill || iFrame>mxSafeFrame || iDbpage>mxPage ){ continue; } @@ -55704,6 +56114,7 @@ */ SQLITE_PRIVATE int sqlite3WalClose( Wal *pWal, /* Wal to close */ + sqlite3 *db, /* For interrupt flag */ int sync_flags, /* Flags to pass to OsSync() (or 0) */ int nBuf, u8 *zBuf /* Buffer of at least nBuf bytes */ @@ -55720,13 +56131,14 @@ ** ** The EXCLUSIVE lock is not released before returning. */ - rc = sqlite3OsLock(pWal->pDbFd, SQLITE_LOCK_EXCLUSIVE); - if( rc==SQLITE_OK ){ + if( zBuf!=0 + && SQLITE_OK==(rc = sqlite3OsLock(pWal->pDbFd, SQLITE_LOCK_EXCLUSIVE)) + ){ if( pWal->exclusiveMode==WAL_NORMAL_MODE ){ pWal->exclusiveMode = WAL_EXCLUSIVE_MODE; } - rc = sqlite3WalCheckpoint( - pWal, SQLITE_CHECKPOINT_PASSIVE, 0, 0, sync_flags, nBuf, zBuf, 0, 0 + rc = sqlite3WalCheckpoint(pWal, db, + SQLITE_CHECKPOINT_PASSIVE, 0, 0, sync_flags, nBuf, zBuf, 0, 0 ); if( rc==SQLITE_OK ){ int bPersist = -1; @@ -56155,7 +56567,85 @@ return rc; } +#ifdef SQLITE_ENABLE_SNAPSHOT /* +** Attempt to reduce the value of the WalCkptInfo.nBackfillAttempted +** variable so that older snapshots can be accessed. To do this, loop +** through all wal frames from nBackfillAttempted to (nBackfill+1), +** comparing their content to the corresponding page with the database +** file, if any. Set nBackfillAttempted to the frame number of the +** first frame for which the wal file content matches the db file. +** +** This is only really safe if the file-system is such that any page +** writes made by earlier checkpointers were atomic operations, which +** is not always true. It is also possible that nBackfillAttempted +** may be left set to a value larger than expected, if a wal frame +** contains content that duplicate of an earlier version of the same +** page. +** +** SQLITE_OK is returned if successful, or an SQLite error code if an +** error occurs. It is not an error if nBackfillAttempted cannot be +** decreased at all. +*/ +SQLITE_PRIVATE int sqlite3WalSnapshotRecover(Wal *pWal){ + int rc; + + assert( pWal->readLock>=0 ); + rc = walLockExclusive(pWal, WAL_CKPT_LOCK, 1); + if( rc==SQLITE_OK ){ + volatile WalCkptInfo *pInfo = walCkptInfo(pWal); + int szPage = (int)pWal->szPage; + i64 szDb; /* Size of db file in bytes */ + + rc = sqlite3OsFileSize(pWal->pDbFd, &szDb); + if( rc==SQLITE_OK ){ + void *pBuf1 = sqlite3_malloc(szPage); + void *pBuf2 = sqlite3_malloc(szPage); + if( pBuf1==0 || pBuf2==0 ){ + rc = SQLITE_NOMEM; + }else{ + u32 i = pInfo->nBackfillAttempted; + for(i=pInfo->nBackfillAttempted; i>pInfo->nBackfill; i--){ + volatile ht_slot *dummy; + volatile u32 *aPgno; /* Array of page numbers */ + u32 iZero; /* Frame corresponding to aPgno[0] */ + u32 pgno; /* Page number in db file */ + i64 iDbOff; /* Offset of db file entry */ + i64 iWalOff; /* Offset of wal file entry */ + + rc = walHashGet(pWal, walFramePage(i), &dummy, &aPgno, &iZero); + if( rc!=SQLITE_OK ) break; + pgno = aPgno[i-iZero]; + iDbOff = (i64)(pgno-1) * szPage; + + if( iDbOff+szPage<=szDb ){ + iWalOff = walFrameOffset(i, szPage) + WAL_FRAME_HDRSIZE; + rc = sqlite3OsRead(pWal->pWalFd, pBuf1, szPage, iWalOff); + + if( rc==SQLITE_OK ){ + rc = sqlite3OsRead(pWal->pDbFd, pBuf2, szPage, iDbOff); + } + + if( rc!=SQLITE_OK || 0==memcmp(pBuf1, pBuf2, szPage) ){ + break; + } + } + + pInfo->nBackfillAttempted = i-1; + } + } + + sqlite3_free(pBuf1); + sqlite3_free(pBuf2); + } + walUnlockExclusive(pWal, WAL_CKPT_LOCK, 1); + } + + return rc; +} +#endif /* SQLITE_ENABLE_SNAPSHOT */ + +/* ** Begin a read transaction on the database. ** ** This routine used to be called sqlite3OpenSnapshot() and with good reason: @@ -56217,7 +56707,11 @@ ** has not yet set the pInfo->nBackfillAttempted variable to indicate ** its intent. To avoid the race condition this leads to, ensure that ** there is no checkpointer process by taking a shared CKPT lock - ** before checking pInfo->nBackfillAttempted. */ + ** before checking pInfo->nBackfillAttempted. + ** + ** TODO: Does the aReadMark[] lock prevent a checkpointer from doing + ** this already? + */ rc = walLockShared(pWal, WAL_CKPT_LOCK); if( rc==SQLITE_OK ){ @@ -56974,6 +57468,7 @@ */ SQLITE_PRIVATE int sqlite3WalCheckpoint( Wal *pWal, /* Wal connection */ + sqlite3 *db, /* Check this handle's interrupt flag */ int eMode, /* PASSIVE, FULL, RESTART, or TRUNCATE */ int (*xBusy)(void*), /* Function to call when busy */ void *pBusyArg, /* Context argument for xBusyHandler */ @@ -57048,7 +57543,7 @@ if( pWal->hdr.mxFrame && walPagesize(pWal)!=nBuf ){ rc = SQLITE_CORRUPT_BKPT; }else{ - rc = walCheckpoint(pWal, eMode2, xBusy2, pBusyArg, sync_flags, zBuf); + rc = walCheckpoint(pWal, db, eMode2, xBusy2, pBusyArg, sync_flags, zBuf); } /* If no error occurred, set the output variables. */ @@ -57168,9 +57663,14 @@ SQLITE_PRIVATE int sqlite3WalSnapshotGet(Wal *pWal, sqlite3_snapshot **ppSnapshot){ int rc = SQLITE_OK; WalIndexHdr *pRet; + static const u32 aZero[4] = { 0, 0, 0, 0 }; assert( pWal->readLock>=0 && pWal->writeLock==0 ); + if( memcmp(&pWal->hdr.aFrameCksum[0],aZero,16)==0 ){ + *ppSnapshot = 0; + return SQLITE_ERROR; + } pRet = (WalIndexHdr*)sqlite3_malloc(sizeof(WalIndexHdr)); if( pRet==0 ){ rc = SQLITE_NOMEM_BKPT; @@ -57508,37 +58008,39 @@ #define PTF_LEAF 0x08 /* -** As each page of the file is loaded into memory, an instance of the following -** structure is appended and initialized to zero. This structure stores -** information about the page that is decoded from the raw file page. +** An instance of this object stores information about each a single database +** page that has been loaded into memory. The information in this object +** is derived from the raw on-disk page content. ** -** The pParent field points back to the parent page. This allows us to -** walk up the BTree from any leaf to the root. Care must be taken to -** unref() the parent page pointer when this page is no longer referenced. -** The pageDestructor() routine handles that chore. +** As each database page is loaded into memory, the pager allocats an +** instance of this object and zeros the first 8 bytes. (This is the +** "extra" information associated with each page of the pager.) ** ** Access to all fields of this structure is controlled by the mutex ** stored in MemPage.pBt->mutex. */ struct MemPage { u8 isInit; /* True if previously initialized. MUST BE FIRST! */ - u8 nOverflow; /* Number of overflow cell bodies in aCell[] */ + u8 bBusy; /* Prevent endless loops on corrupt database files */ u8 intKey; /* True if table b-trees. False for index b-trees */ u8 intKeyLeaf; /* True if the leaf of an intKey table */ + Pgno pgno; /* Page number for this page */ + /* Only the first 8 bytes (above) are zeroed by pager.c when a new page + ** is allocated. All fields that follow must be initialized before use */ u8 leaf; /* True if a leaf page */ u8 hdrOffset; /* 100 for page 1. 0 otherwise */ u8 childPtrSize; /* 0 if leaf==1. 4 if leaf==0 */ u8 max1bytePayload; /* min(maxLocal,127) */ - u8 bBusy; /* Prevent endless loops on corrupt database files */ + u8 nOverflow; /* Number of overflow cell bodies in aCell[] */ u16 maxLocal; /* Copy of BtShared.maxLocal or BtShared.maxLeaf */ u16 minLocal; /* Copy of BtShared.minLocal or BtShared.minLeaf */ u16 cellOffset; /* Index in aData of first cell pointer */ u16 nFree; /* Number of free bytes on the page */ u16 nCell; /* Number of cells on this page, local and ovfl */ u16 maskPage; /* Mask for page offset */ - u16 aiOvfl[5]; /* Insert the i-th overflow cell before the aiOvfl-th + u16 aiOvfl[4]; /* Insert the i-th overflow cell before the aiOvfl-th ** non-overflow cell */ - u8 *apOvfl[5]; /* Pointers to the body of overflow cells */ + u8 *apOvfl[4]; /* Pointers to the body of overflow cells */ BtShared *pBt; /* Pointer to BtShared that this page is part of */ u8 *aData; /* Pointer to disk image of the page data */ u8 *aDataEnd; /* One byte past the end of usable data */ @@ -57547,17 +58049,9 @@ DbPage *pDbPage; /* Pager page handle */ u16 (*xCellSize)(MemPage*,u8*); /* cellSizePtr method */ void (*xParseCell)(MemPage*,u8*,CellInfo*); /* btreeParseCell method */ - Pgno pgno; /* Page number for this page */ }; /* -** The in-memory image of a disk page has the auxiliary information appended -** to the end. EXTRA_SIZE is the number of bytes of space needed to hold -** that extra information. -*/ -#define EXTRA_SIZE sizeof(MemPage) - -/* ** A linked list of the following structures is stored at BtShared.pLock. ** Locks are added (or upgraded from READ_LOCK to WRITE_LOCK) when a cursor ** is opened on the table with root page BtShared.iTable. Locks are removed @@ -58875,7 +59369,7 @@ pCur->nKey = sqlite3BtreePayloadSize(pCur); pKey = sqlite3Malloc( pCur->nKey ); if( pKey ){ - rc = sqlite3BtreeKey(pCur, 0, (int)pCur->nKey, pKey); + rc = sqlite3BtreePayload(pCur, 0, (int)pCur->nKey, pKey); if( rc==SQLITE_OK ){ pCur->pKey = pKey; }else{ @@ -59006,26 +59500,23 @@ ){ int rc; /* Status code */ UnpackedRecord *pIdxKey; /* Unpacked index key */ - char aSpace[384]; /* Temp space for pIdxKey - to avoid a malloc */ - char *pFree = 0; if( pKey ){ assert( nKey==(i64)(int)nKey ); - pIdxKey = sqlite3VdbeAllocUnpackedRecord( - pCur->pKeyInfo, aSpace, sizeof(aSpace), &pFree - ); + pIdxKey = sqlite3VdbeAllocUnpackedRecord(pCur->pKeyInfo); if( pIdxKey==0 ) return SQLITE_NOMEM_BKPT; sqlite3VdbeRecordUnpack(pCur->pKeyInfo, (int)nKey, pKey, pIdxKey); if( pIdxKey->nField==0 ){ - sqlite3DbFree(pCur->pKeyInfo->db, pFree); - return SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_BKPT; + goto moveto_done; } }else{ pIdxKey = 0; } rc = sqlite3BtreeMovetoUnpacked(pCur, pIdxKey, nKey, bias, pRes); - if( pFree ){ - sqlite3DbFree(pCur->pKeyInfo->db, pFree); +moveto_done: + if( pIdxKey ){ + sqlite3DbFree(pCur->pKeyInfo->db, pIdxKey); } return rc; } @@ -59986,7 +60477,7 @@ assert( pPage->aData == sqlite3PagerGetData(pPage->pDbPage) ); if( !pPage->isInit ){ - u16 pc; /* Address of a freeblock within pPage->aData[] */ + int pc; /* Address of a freeblock within pPage->aData[] */ u8 hdr; /* Offset to beginning of page header */ u8 *data; /* Equal to pPage->aData */ BtShared *pBt; /* The main btree structure */ @@ -60066,25 +60557,30 @@ ** freeblocks. */ pc = get2byte(&data[hdr+1]); nFree = data[hdr+7] + top; /* Init nFree to non-freeblock free space */ - while( pc>0 ){ - u16 next, size; - if( pciCellLast ){ + if( pc>0 ){ + u32 next, size; + if( pc0 && next<=pc+size+3) || pc+size>usableSize ){ - /* Free blocks must be in ascending order. And the last byte of - ** the free-block must lie on the database page. */ - return SQLITE_CORRUPT_BKPT; + while( 1 ){ + if( pc>iCellLast ){ + return SQLITE_CORRUPT_BKPT; /* Freeblock off the end of the page */ + } + next = get2byte(&data[pc]); + size = get2byte(&data[pc+2]); + nFree = nFree + size; + if( next<=pc+size+3 ) break; + pc = next; } - nFree = nFree + size; - pc = next; + if( next>0 ){ + return SQLITE_CORRUPT_BKPT; /* Freeblock not in ascending order */ + } + if( pc+size>(unsigned int)usableSize ){ + return SQLITE_CORRUPT_BKPT; /* Last freeblock extends past page end */ + } } /* At this point, nFree contains the sum of the offset to the start @@ -60525,7 +61021,7 @@ goto btree_open_out; } rc = sqlite3PagerOpen(pVfs, &pBt->pPager, zFilename, - EXTRA_SIZE, flags, vfsFlags, pageReinit); + sizeof(MemPage), flags, vfsFlags, pageReinit); if( rc==SQLITE_OK ){ sqlite3PagerSetMmapLimit(pBt->pPager, db->szMmap); rc = sqlite3PagerReadFileheader(pBt->pPager,sizeof(zDbHeader),zDbHeader); @@ -60638,19 +61134,26 @@ btree_open_out: if( rc!=SQLITE_OK ){ if( pBt && pBt->pPager ){ - sqlite3PagerClose(pBt->pPager); + sqlite3PagerClose(pBt->pPager, 0); } sqlite3_free(pBt); sqlite3_free(p); *ppBtree = 0; }else{ + sqlite3_file *pFile; + /* If the B-Tree was successfully opened, set the pager-cache size to the ** default value. Except, when opening on an existing shared pager-cache, ** do not change the pager-cache size. */ if( sqlite3BtreeSchema(p, 0, 0)==0 ){ sqlite3PagerSetCachesize(p->pBt->pPager, SQLITE_DEFAULT_CACHE_SIZE); } + + pFile = sqlite3PagerFile(pBt->pPager); + if( pFile->pMethods ){ + sqlite3OsFileControlHint(pFile, SQLITE_FCNTL_PDB, (void*)&pBt->db); + } } if( mutexOpen ){ assert( sqlite3_mutex_held(mutexOpen) ); @@ -60780,7 +61283,7 @@ ** Clean out and delete the BtShared object. */ assert( !pBt->pCursor ); - sqlite3PagerClose(pBt->pPager); + sqlite3PagerClose(pBt->pPager, p->db); if( pBt->xFreeSchema && pBt->pSchema ){ pBt->xFreeSchema(pBt->pSchema); } @@ -61527,14 +62030,11 @@ int nCell; /* Number of cells in page pPage */ int rc; /* Return code */ BtShared *pBt = pPage->pBt; - u8 isInitOrig = pPage->isInit; Pgno pgno = pPage->pgno; assert( sqlite3_mutex_held(pPage->pBt->mutex) ); rc = btreeInitPage(pPage); - if( rc!=SQLITE_OK ){ - goto set_child_ptrmaps_out; - } + if( rc!=SQLITE_OK ) return rc; nCell = pPage->nCell; for(i=0; iisInit = isInitOrig; return rc; } @@ -61582,7 +62080,6 @@ } put4byte(pPage->aData, iTo); }else{ - u8 isInitOrig = pPage->isInit; int i; int nCell; int rc; @@ -61618,8 +62115,6 @@ } put4byte(&pPage->aData[pPage->hdrOffset+8], iTo); } - - pPage->isInit = isInitOrig; } return SQLITE_OK; } @@ -62514,6 +63009,10 @@ return pCur && pCur->eState==CURSOR_VALID; } #endif /* NDEBUG */ +SQLITE_PRIVATE int sqlite3BtreeCursorIsValidNN(BtCursor *pCur){ + assert( pCur!=0 ); + return pCur->eState==CURSOR_VALID; +} /* ** Return the value of the integer key or "rowid" for a table btree. @@ -62883,43 +63382,35 @@ } /* -** Read part of the key associated with cursor pCur. Exactly -** "amt" bytes will be transferred into pBuf[]. The transfer +** Read part of the payload for the row at which that cursor pCur is currently +** pointing. "amt" bytes will be transferred into pBuf[]. The transfer ** begins at "offset". ** -** The caller must ensure that pCur is pointing to a valid row -** in the table. +** pCur can be pointing to either a table or an index b-tree. +** If pointing to a table btree, then the content section is read. If +** pCur is pointing to an index b-tree then the key section is read. ** +** For sqlite3BtreePayload(), the caller must ensure that pCur is pointing +** to a valid row in the table. For sqlite3BtreePayloadChecked(), the +** cursor might be invalid or might need to be restored before being read. +** ** Return SQLITE_OK on success or an error code if anything goes ** wrong. An error is returned if "offset+amt" is larger than ** the available payload. */ -SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){ +SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){ assert( cursorHoldsMutex(pCur) ); assert( pCur->eState==CURSOR_VALID ); assert( pCur->iPage>=0 && pCur->apPage[pCur->iPage] ); assert( pCur->aiIdx[pCur->iPage]apPage[pCur->iPage]->nCell ); return accessPayload(pCur, offset, amt, (unsigned char*)pBuf, 0); } - -/* -** Read part of the data associated with cursor pCur. Exactly -** "amt" bytes will be transfered into pBuf[]. The transfer -** begins at "offset". -** -** Return SQLITE_OK on success or an error code if anything goes -** wrong. An error is returned if "offset+amt" is larger than -** the available payload. -*/ -SQLITE_PRIVATE int sqlite3BtreeData(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){ - int rc; - #ifndef SQLITE_OMIT_INCRBLOB +SQLITE_PRIVATE int sqlite3BtreePayloadChecked(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){ + int rc; if ( pCur->eState==CURSOR_INVALID ){ return SQLITE_ABORT; } -#endif - assert( cursorOwnsBtShared(pCur) ); rc = restoreCursorPosition(pCur); if( rc==SQLITE_OK ){ @@ -62930,6 +63421,7 @@ } return rc; } +#endif /* SQLITE_OMIT_INCRBLOB */ /* ** Return a pointer to payload information from the entry that the @@ -63100,9 +63592,12 @@ } if( pCur->iPage>=0 ){ - while( pCur->iPage ){ - assert( pCur->apPage[pCur->iPage]!=0 ); - releasePageNotNull(pCur->apPage[pCur->iPage--]); + if( pCur->iPage ){ + do{ + assert( pCur->apPage[pCur->iPage]!=0 ); + releasePageNotNull(pCur->apPage[pCur->iPage--]); + }while( pCur->iPage); + goto skip_init; } }else if( pCur->pgnoRoot==0 ){ pCur->eState = CURSOR_INVALID; @@ -63113,7 +63608,7 @@ 0, pCur->curPagerFlags); if( rc!=SQLITE_OK ){ pCur->eState = CURSOR_INVALID; - return rc; + return rc; } pCur->iPage = 0; pCur->curIntKey = pCur->apPage[0]->intKey; @@ -63136,10 +63631,12 @@ return SQLITE_CORRUPT_BKPT; } +skip_init: pCur->aiIdx[0] = 0; pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidNKey|BTCF_ValidOvfl); + pRoot = pCur->apPage[0]; if( pRoot->nCell>0 ){ pCur->eState = CURSOR_VALID; }else if( !pRoot->leaf ){ @@ -63396,16 +63893,16 @@ if( lwr>upr ){ c = +1; break; } }else{ assert( nCellKey==intKey ); - pCur->curFlags |= BTCF_ValidNKey; - pCur->info.nKey = nCellKey; pCur->aiIdx[pCur->iPage] = (u16)idx; if( !pPage->leaf ){ lwr = idx; goto moveto_next_layer; }else{ + pCur->curFlags |= BTCF_ValidNKey; + pCur->info.nKey = nCellKey; + pCur->info.nSize = 0; *pRes = 0; - rc = SQLITE_OK; - goto moveto_finish; + return SQLITE_OK; } } assert( lwr+upr>=0 ); @@ -63516,7 +64013,7 @@ } moveto_finish: pCur->info.nSize = 0; - pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); + assert( (pCur->curFlags & BTCF_ValidOvfl)==0 ); return rc; } @@ -63714,7 +64211,7 @@ moveToParent(pCur); } assert( pCur->info.nSize==0 ); - assert( (pCur->curFlags & (BTCF_ValidNKey|BTCF_ValidOvfl))==0 ); + assert( (pCur->curFlags & (BTCF_ValidOvfl))==0 ); pCur->aiIdx[pCur->iPage]--; pPage = pCur->apPage[pCur->iPage]; @@ -64230,30 +64727,28 @@ static int clearCell( MemPage *pPage, /* The page that contains the Cell */ unsigned char *pCell, /* First byte of the Cell */ - u16 *pnSize /* Write the size of the Cell here */ + CellInfo *pInfo /* Size information about the cell */ ){ BtShared *pBt = pPage->pBt; - CellInfo info; Pgno ovflPgno; int rc; int nOvfl; u32 ovflPageSize; assert( sqlite3_mutex_held(pPage->pBt->mutex) ); - pPage->xParseCell(pPage, pCell, &info); - *pnSize = info.nSize; - if( info.nLocal==info.nPayload ){ + pPage->xParseCell(pPage, pCell, pInfo); + if( pInfo->nLocal==pInfo->nPayload ){ return SQLITE_OK; /* No overflow pages. Return without doing anything */ } - if( pCell+info.nSize-1 > pPage->aData+pPage->maskPage ){ + if( pCell+pInfo->nSize-1 > pPage->aData+pPage->maskPage ){ return SQLITE_CORRUPT_BKPT; /* Cell extends past end of page */ } - ovflPgno = get4byte(pCell + info.nSize - 4); + ovflPgno = get4byte(pCell + pInfo->nSize - 4); assert( pBt->usableSize > 4 ); ovflPageSize = pBt->usableSize - 4; - nOvfl = (info.nPayload - info.nLocal + ovflPageSize - 1)/ovflPageSize; + nOvfl = (pInfo->nPayload - pInfo->nLocal + ovflPageSize - 1)/ovflPageSize; assert( nOvfl>0 || - (CORRUPT_DB && (info.nPayload + ovflPageSize)nPayload + ovflPageSize)=0 && idxnCell ); assert( CORRUPT_DB || sz==cellSize(pPage, idx) ); assert( sqlite3PagerIswriteable(pPage->pDbPage) ); @@ -64577,7 +65071,10 @@ put4byte(pCell, iChild); } j = pPage->nOverflow++; - assert( j<(int)(sizeof(pPage->apOvfl)/sizeof(pPage->apOvfl[0])) ); + /* Comparison against ArraySize-1 since we hold back one extra slot + ** as a contingency. In other words, never need more than 3 overflow + ** slots but 4 are allocated, just to be safe. */ + assert( j < ArraySize(pPage->apOvfl)-1 ); pPage->apOvfl[j] = pCell; pPage->aiOvfl[j] = (u16)i; @@ -65317,7 +65814,7 @@ nMaxCells += 1+apOld[i]->nCell+apOld[i]->nOverflow; if( (i--)==0 ) break; - if( i+nxDiv==pParent->aiOvfl[0] && pParent->nOverflow ){ + if( pParent->nOverflow && i+nxDiv==pParent->aiOvfl[0] ){ apDiv[i] = pParent->apOvfl[0]; pgno = get4byte(apDiv[i]); szNew[i] = pParent->xCellSize(pParent, apDiv[i]); @@ -66171,17 +66668,19 @@ ** pX.pData,nData,nZero fields must be zero. ** ** If the seekResult parameter is non-zero, then a successful call to -** MovetoUnpacked() to seek cursor pCur to (pKey, nKey) has already -** been performed. seekResult is the search result returned (a negative -** number if pCur points at an entry that is smaller than (pKey, nKey), or -** a positive value if pCur points at an entry that is larger than -** (pKey, nKey)). +** MovetoUnpacked() to seek cursor pCur to (pKey,nKey) has already +** been performed. In other words, if seekResult!=0 then the cursor +** is currently pointing to a cell that will be adjacent to the cell +** to be inserted. If seekResult<0 then pCur points to a cell that is +** smaller then (pKey,nKey). If seekResult>0 then pCur points to a cell +** that is larger than (pKey,nKey). ** -** If the seekResult parameter is non-zero, then the caller guarantees that -** cursor pCur is pointing at the existing copy of a row that is to be -** overwritten. If the seekResult parameter is 0, then cursor pCur may -** point to any entry or to no entry at all and so this function has to seek -** the cursor before the new key can be inserted. +** If seekResult==0, that means pCur is pointing at some unknown location. +** In that case, this routine must seek the cursor to the correct insertion +** point for (pKey,nKey) before doing the insertion. For index btrees, +** if pX->nMem is non-zero, then pX->aMem contains pointers to the unpacked +** key values and pX->aMem can be used instead of pX->pKey to avoid having +** to decode the key. */ SQLITE_PRIVATE int sqlite3BtreeInsert( BtCursor *pCur, /* Insert data into the table of this cursor */ @@ -66242,15 +66741,30 @@ /* If the cursor is currently on the last row and we are appending a ** new row onto the end, set the "loc" to avoid an unnecessary ** btreeMoveto() call */ - if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey>0 - && pCur->info.nKey==pX->nKey-1 ){ - loc = -1; + if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey ){ + loc = 0; + }else if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey>0 + && pCur->info.nKey==pX->nKey-1 ){ + loc = -1; }else if( loc==0 ){ rc = sqlite3BtreeMovetoUnpacked(pCur, 0, pX->nKey, appendBias, &loc); if( rc ) return rc; } }else if( loc==0 ){ - rc = btreeMoveto(pCur, pX->pKey, pX->nKey, appendBias, &loc); + if( pX->nMem ){ + UnpackedRecord r; + r.pKeyInfo = pCur->pKeyInfo; + r.aMem = pX->aMem; + r.nField = pX->nMem; + r.default_rc = 0; + r.errCode = 0; + r.r1 = 0; + r.r2 = 0; + r.eqSeen = 0; + rc = sqlite3BtreeMovetoUnpacked(pCur, &r, 0, appendBias, &loc); + }else{ + rc = btreeMoveto(pCur, pX->pKey, pX->nKey, appendBias, &loc); + } if( rc ) return rc; } assert( pCur->eState==CURSOR_VALID || (pCur->eState==CURSOR_INVALID && loc) ); @@ -66271,7 +66785,7 @@ assert( szNew <= MX_CELL_SIZE(pBt) ); idx = pCur->aiIdx[pCur->iPage]; if( loc==0 ){ - u16 szOld; + CellInfo info; assert( idxnCell ); rc = sqlite3PagerWrite(pPage->pDbPage); if( rc ){ @@ -66281,8 +66795,19 @@ if( !pPage->leaf ){ memcpy(newCell, oldCell, 4); } - rc = clearCell(pPage, oldCell, &szOld); - dropCell(pPage, idx, szOld, &rc); + rc = clearCell(pPage, oldCell, &info); + if( info.nSize==szNew && info.nLocal==info.nPayload ){ + /* Overwrite the old cell with the new if they are the same size. + ** We could also try to do this if the old cell is smaller, then add + ** the leftover space to the free list. But experiments show that + ** doing that is no faster then skipping this optimization and just + ** calling dropCell() and insertCell(). */ + assert( rc==SQLITE_OK ); /* clearCell never fails when nLocal==nPayload */ + if( oldCell+szNew > pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT; + memcpy(oldCell, newCell, szNew); + return SQLITE_OK; + } + dropCell(pPage, idx, info.nSize, &rc); if( rc ) goto end_insert; }else if( loc<0 && pPage->nCell>0 ){ assert( pPage->leaf ); @@ -66358,7 +66883,7 @@ unsigned char *pCell; /* Pointer to cell to delete */ int iCellIdx; /* Index of cell to delete */ int iCellDepth; /* Depth of node containing pCell */ - u16 szCell; /* Size of the cell being deleted */ + CellInfo info; /* Size of the cell being deleted */ int bSkipnext = 0; /* Leaf cursor in SKIPNEXT state */ u8 bPreserve = flags & BTREE_SAVEPOSITION; /* Keep cursor valid */ @@ -66430,8 +66955,8 @@ ** itself from within the page. */ rc = sqlite3PagerWrite(pPage->pDbPage); if( rc ) return rc; - rc = clearCell(pPage, pCell, &szCell); - dropCell(pPage, iCellIdx, szCell, &rc); + rc = clearCell(pPage, pCell, &info); + dropCell(pPage, iCellIdx, info.nSize, &rc); if( rc ) return rc; /* If the cell deleted was not located on a leaf page, then the cursor @@ -66681,7 +67206,7 @@ unsigned char *pCell; int i; int hdr; - u16 szCell; + CellInfo info; assert( sqlite3_mutex_held(pBt->mutex) ); if( pgno>btreePagecount(pBt) ){ @@ -66701,7 +67226,7 @@ rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange); if( rc ) goto cleardatabasepage_out; } - rc = clearCell(pPage, pCell, &szCell); + rc = clearCell(pPage, pCell, &info); if( rc ) goto cleardatabasepage_out; } if( !pPage->leaf ){ @@ -66792,28 +67317,8 @@ assert( sqlite3BtreeHoldsMutex(p) ); assert( p->inTrans==TRANS_WRITE ); + assert( iTable>=2 ); - /* It is illegal to drop a table if any cursors are open on the - ** database. This is because in auto-vacuum mode the backend may - ** need to move another root-page to fill a gap left by the deleted - ** root page. If an open cursor was using this page a problem would - ** occur. - ** - ** This error is caught long before control reaches this point. - */ - if( NEVER(pBt->pCursor) ){ - sqlite3ConnectionBlocked(p->db, pBt->pCursor->pBtree->db); - return SQLITE_LOCKED_SHAREDCACHE; - } - - /* - ** It is illegal to drop the sqlite_master table on page 1. But again, - ** this error is caught long before reaching this point. - */ - if( NEVER(iTable<2) ){ - return SQLITE_CORRUPT_BKPT; - } - rc = btreeGetPage(pBt, (Pgno)iTable, &pPage, 0); if( rc ) return rc; rc = sqlite3BtreeClearTable(p, iTable, 0); @@ -67720,7 +68225,7 @@ if( pBt->inTransaction!=TRANS_NONE ){ rc = SQLITE_LOCKED; }else{ - rc = sqlite3PagerCheckpoint(pBt->pPager, eMode, pnLog, pnCkpt); + rc = sqlite3PagerCheckpoint(pBt->pPager, p->db, eMode, pnLog, pnCkpt); } sqlite3BtreeLeave(p); } @@ -69696,10 +70201,9 @@ /* ** Move data out of a btree key or data field and into a Mem structure. -** The data or key is taken from the entry that pCur is currently pointing +** The data is payload from the entry that pCur is currently pointing ** to. offset and amt determine what portion of the data or key to retrieve. -** key is true to get the key or false to get data. The result is written -** into the pMem element. +** The result is written into the pMem element. ** ** The pMem object must have been initialized. This routine will use ** pMem->zMalloc to hold the content from the btree, if possible. New @@ -69714,17 +70218,12 @@ BtCursor *pCur, /* Cursor pointing at record to retrieve. */ u32 offset, /* Offset from the start of data to return bytes from. */ u32 amt, /* Number of bytes to return. */ - int key, /* If true, retrieve from the btree key, not data. */ Mem *pMem /* OUT: Return data in this Mem structure. */ ){ int rc; pMem->flags = MEM_Null; if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+2)) ){ - if( key ){ - rc = sqlite3BtreeKey(pCur, offset, amt, pMem->z); - }else{ - rc = sqlite3BtreeData(pCur, offset, amt, pMem->z); - } + rc = sqlite3BtreePayload(pCur, offset, amt, pMem->z); if( rc==SQLITE_OK ){ pMem->z[amt] = 0; pMem->z[amt+1] = 0; @@ -69740,7 +70239,6 @@ BtCursor *pCur, /* Cursor pointing at record to retrieve. */ u32 offset, /* Offset from the start of data to return bytes from. */ u32 amt, /* Number of bytes to return. */ - int key, /* If true, retrieve from the btree key, not data. */ Mem *pMem /* OUT: Return data in this Mem structure. */ ){ char *zData; /* Data from the btree layer */ @@ -69761,7 +70259,7 @@ pMem->flags = MEM_Blob|MEM_Ephem; pMem->n = (int)amt; }else{ - rc = vdbeMemFromBtreeResize(pCur, offset, amt, key, pMem); + rc = vdbeMemFromBtreeResize(pCur, offset, amt, pMem); } return rc; @@ -70102,6 +70600,7 @@ }else if( op==TK_NULL ){ pVal = valueNew(db, pCtx); if( pVal==0 ) goto no_mem; + sqlite3VdbeMemNumerify(pVal); } #ifndef SQLITE_OMIT_BLOB_LITERAL else if( op==TK_BLOB ){ @@ -70791,7 +71290,11 @@ int p4 /* The P4 operand as an integer */ ){ int addr = sqlite3VdbeAddOp3(p, op, p1, p2, p3); - sqlite3VdbeChangeP4(p, addr, SQLITE_INT_TO_PTR(p4), P4_INT32); + if( p->db->mallocFailed==0 ){ + VdbeOp *pOp = &p->aOp[addr]; + pOp->p4type = P4_INT32; + pOp->p4.i = p4; + } return addr; } @@ -71302,10 +71805,6 @@ break; } #endif - case P4_MPRINTF: { - if( db->pnBytesFreed==0 ) sqlite3_free(p4); - break; - } case P4_FUNCDEF: { freeEphemeralFunction(db, (FuncDef*)p4); break; @@ -71451,15 +71950,41 @@ } /* +** Change the P4 operand of the most recently coded instruction +** to the value defined by the arguments. This is a high-speed +** version of sqlite3VdbeChangeP4(). +** +** The P4 operand must not have been previously defined. And the new +** P4 must not be P4_INT32. Use sqlite3VdbeChangeP4() in either of +** those cases. +*/ +SQLITE_PRIVATE void sqlite3VdbeAppendP4(Vdbe *p, void *pP4, int n){ + VdbeOp *pOp; + assert( n!=P4_INT32 && n!=P4_VTAB ); + assert( n<=0 ); + if( p->db->mallocFailed ){ + freeP4(p->db, n, pP4); + }else{ + assert( pP4!=0 ); + assert( p->nOp>0 ); + pOp = &p->aOp[p->nOp-1]; + assert( pOp->p4type==P4_NOTUSED ); + pOp->p4type = n; + pOp->p4.p = pP4; + } +} + +/* ** Set the P4 on the most recently added opcode to the KeyInfo for the ** index given. */ SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse *pParse, Index *pIdx){ Vdbe *v = pParse->pVdbe; + KeyInfo *pKeyInfo; assert( v!=0 ); assert( pIdx!=0 ); - sqlite3VdbeChangeP4(v, -1, (char*)sqlite3KeyInfoOfIndex(pParse, pIdx), - P4_KEYINFO); + pKeyInfo = sqlite3KeyInfoOfIndex(pParse, pIdx); + if( pKeyInfo ) sqlite3VdbeAppendP4(v, pKeyInfo, P4_KEYINFO); } #ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS @@ -71749,7 +72274,7 @@ sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg); break; } -#ifdef SQLITE_DEBUG +#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) case P4_FUNCCTX: { FuncDef *pDef = pOp->p4.pCtx->pFunc; sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg); @@ -72427,10 +72952,8 @@ x.nFree = x.nNeeded; }while( !db->mallocFailed ); - p->nzVar = pParse->nzVar; - p->azVar = pParse->azVar; - pParse->nzVar = 0; - pParse->azVar = 0; + p->pVList = pParse->pVList; + pParse->pVList = 0; p->explain = pParse->explain; if( db->mallocFailed ){ p->nVar = 0; @@ -72458,15 +72981,15 @@ if( pCx==0 ){ return; } - assert( pCx->pBt==0 || pCx->eCurType==CURTYPE_BTREE ); + assert( pCx->pBtx==0 || pCx->eCurType==CURTYPE_BTREE ); switch( pCx->eCurType ){ case CURTYPE_SORTER: { sqlite3VdbeSorterClose(p->db, pCx); break; } case CURTYPE_BTREE: { - if( pCx->pBt ){ - sqlite3BtreeClose(pCx->pBt); + if( pCx->pBtx ){ + sqlite3BtreeClose(pCx->pBtx); /* The pCx->pCursor will be close automatically, if it exists, by ** the call above. */ }else{ @@ -73424,7 +73947,6 @@ */ SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3 *db, Vdbe *p){ SubProgram *pSub, *pNext; - int i; assert( p->db==0 || p->db==db ); releaseMemArray(p->aColName, p->nResColumn*COLNAME_N); for(pSub=p->pProgram; pSub; pSub=pNext){ @@ -73434,18 +73956,20 @@ } if( p->magic!=VDBE_MAGIC_INIT ){ releaseMemArray(p->aVar, p->nVar); - for(i=p->nzVar-1; i>=0; i--) sqlite3DbFree(db, p->azVar[i]); - sqlite3DbFree(db, p->azVar); + sqlite3DbFree(db, p->pVList); sqlite3DbFree(db, p->pFree); } vdbeFreeOpArray(db, p->aOp, p->nOp); sqlite3DbFree(db, p->aColName); sqlite3DbFree(db, p->zSql); #ifdef SQLITE_ENABLE_STMT_SCANSTATUS - for(i=0; inScan; i++){ - sqlite3DbFree(db, p->aScan[i].zName); + { + int i; + for(i=0; inScan; i++){ + sqlite3DbFree(db, p->aScan[i].zName); + } + sqlite3DbFree(db, p->aScan); } - sqlite3DbFree(db, p->aScan); #endif } @@ -73946,30 +74470,13 @@ ** If an OOM error occurs, NULL is returned. */ SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord( - KeyInfo *pKeyInfo, /* Description of the record */ - char *pSpace, /* Unaligned space available */ - int szSpace, /* Size of pSpace[] in bytes */ - char **ppFree /* OUT: Caller should free this pointer */ + KeyInfo *pKeyInfo /* Description of the record */ ){ UnpackedRecord *p; /* Unpacked record to return */ - int nOff; /* Increment pSpace by nOff to align it */ int nByte; /* Number of bytes required for *p */ - - /* We want to shift the pointer pSpace up such that it is 8-byte aligned. - ** Thus, we need to calculate a value, nOff, between 0 and 7, to shift - ** it by. If pSpace is already 8-byte aligned, nOff should be zero. - */ - nOff = (8 - (SQLITE_PTR_TO_INT(pSpace) & 7)) & 7; nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nField+1); - if( nByte>szSpace+nOff ){ - p = (UnpackedRecord *)sqlite3DbMallocRaw(pKeyInfo->db, nByte); - *ppFree = (char *)p; - if( !p ) return 0; - }else{ - p = (UnpackedRecord*)&pSpace[nOff]; - *ppFree = 0; - } - + p = (UnpackedRecord *)sqlite3DbMallocRaw(pKeyInfo->db, nByte); + if( !p ) return 0; p->aMem = (Mem*)&((char*)p)[ROUND8(sizeof(UnpackedRecord))]; assert( pKeyInfo->aSortOrder!=0 ); p->pKeyInfo = pKeyInfo; @@ -74843,7 +75350,7 @@ /* Read in the complete content of the index entry */ sqlite3VdbeMemInit(&m, db, 0); - rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, 1, &m); + rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, &m); if( rc ){ return rc; } @@ -74923,7 +75430,7 @@ return SQLITE_CORRUPT_BKPT; } sqlite3VdbeMemInit(&m, db, 0); - rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, 1, &m); + rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, &m); if( rc ){ return rc; } @@ -76587,10 +77094,8 @@ */ SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt *pStmt, int i){ Vdbe *p = (Vdbe*)pStmt; - if( p==0 || i<1 || i>p->nzVar ){ - return 0; - } - return p->azVar[i-1]; + if( p==0 ) return 0; + return sqlite3VListNumToName(p->pVList, i); } /* @@ -76599,19 +77104,8 @@ ** return 0. */ SQLITE_PRIVATE int sqlite3VdbeParameterIndex(Vdbe *p, const char *zName, int nName){ - int i; - if( p==0 ){ - return 0; - } - if( zName ){ - for(i=0; inzVar; i++){ - const char *z = p->azVar[i]; - if( z && strncmp(z,zName,nName)==0 && z[nName]==0 ){ - return i+1; - } - } - } - return 0; + if( p==0 || zName==0 ) return 0; + return sqlite3VListNameToNum(p->pVList, zName, nName); } SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt *pStmt, const char *zName){ return sqlite3VdbeParameterIndex((Vdbe*)pStmt, zName, sqlite3Strlen30(zName)); @@ -76774,10 +77268,9 @@ int nKey, const void *pKey ){ - char *dummy; /* Dummy argument for AllocUnpackedRecord() */ UnpackedRecord *pRet; /* Return value */ - pRet = sqlite3VdbeAllocUnpackedRecord(pKeyInfo, 0, 0, &dummy); + pRet = sqlite3VdbeAllocUnpackedRecord(pKeyInfo); if( pRet ){ memset(pRet->aMem, 0, sizeof(Mem)*(pKeyInfo->nField+1)); sqlite3VdbeRecordUnpack(pKeyInfo, nKey, pKey, pRet); @@ -76812,7 +77305,7 @@ nRec = sqlite3BtreePayloadSize(p->pCsr->uc.pCursor); aRec = sqlite3DbMallocRaw(db, nRec); if( !aRec ) goto preupdate_old_out; - rc = sqlite3BtreeData(p->pCsr->uc.pCursor, 0, nRec, aRec); + rc = sqlite3BtreePayload(p->pCsr->uc.pCursor, 0, nRec, aRec); if( rc==SQLITE_OK ){ p->pUnpacked = vdbeUnpackRecord(&p->keyinfo, nRec, aRec); if( !p->pUnpacked ) rc = SQLITE_NOMEM; @@ -77329,7 +77822,7 @@ ** Test a register to see if it exceeds the current maximum blob size. ** If it does, record the new maximum blob size. */ -#if defined(SQLITE_TEST) && !defined(SQLITE_OMIT_BUILTIN_TEST) +#if defined(SQLITE_TEST) && !defined(SQLITE_UNTESTABLE) # define UPDATE_MAX_BLOBSIZE(P) updateMaxBlobsize(P) #else # define UPDATE_MAX_BLOBSIZE(P) @@ -77439,7 +77932,7 @@ } if( SQLITE_OK==sqlite3VdbeMemClearAndResize(pMem, nByte) ){ p->apCsr[iCur] = pCx = (VdbeCursor*)pMem->z; - memset(pCx, 0, sizeof(VdbeCursor)); + memset(pCx, 0, offsetof(VdbeCursor,pAltCursor)); pCx->eCurType = eCurType; pCx->iDb = iDb; pCx->nField = nField; @@ -78284,7 +78777,7 @@ p->rc = pOp->p1; p->errorAction = (u8)pOp->p2; p->pc = pcx; - assert( pOp->p5>=0 && pOp->p5<=4 ); + assert( pOp->p5<=4 ); if( p->rc ){ if( pOp->p5 ){ static const char * const azType[] = { "NOT NULL", "UNIQUE", "CHECK", @@ -78497,7 +78990,7 @@ Mem *pVar; /* Value being transferred */ assert( pOp->p1>0 && pOp->p1<=p->nVar ); - assert( pOp->p4.z==0 || pOp->p4.z==p->azVar[pOp->p1-1] ); + assert( pOp->p4.z==0 || pOp->p4.z==sqlite3VListNumToName(p->pVList,pOp->p1) ); pVar = &p->aVar[pOp->p1 - 1]; if( sqlite3VdbeMemTooBig(pVar) ){ goto too_big; @@ -79310,8 +79803,7 @@ assert( pOp->opcode==OP_Eq || pOp->opcode==OP_Ne ); assert( (flags1 & MEM_Cleared)==0 ); assert( (pOp->p5 & SQLITE_JUMPIFNULL)==0 ); - if( (flags1&MEM_Null)!=0 - && (flags3&MEM_Null)!=0 + if( (flags1&flags3&MEM_Null)!=0 && (flags3&MEM_Cleared)==0 ){ res = 0; /* Operands are equal */ @@ -79778,7 +80270,6 @@ assert( pC->eCurType!=CURTYPE_VTAB ); assert( pC->eCurType!=CURTYPE_PSEUDO || pC->nullRow ); assert( pC->eCurType!=CURTYPE_SORTER ); - pCrsr = pC->uc.pCursor; if( pC->cacheStatus!=p->cacheCtr ){ /*OPTIMIZATION-IF-FALSE*/ if( pC->nullRow ){ @@ -79794,6 +80285,7 @@ goto op_column_out; } }else{ + pCrsr = pC->uc.pCursor; assert( pC->eCurType==CURTYPE_BTREE ); assert( pCrsr ); assert( sqlite3BtreeCursorIsValid(pCrsr) ); @@ -79857,7 +80349,7 @@ /* Make sure zData points to enough of the record to cover the header. */ if( pC->aRow==0 ){ memset(&sMem, 0, sizeof(sMem)); - rc = sqlite3VdbeMemFromBtree(pCrsr, 0, aOffset[0], !pC->isTable, &sMem); + rc = sqlite3VdbeMemFromBtree(pC->uc.pCursor, 0, aOffset[0], &sMem); if( rc!=SQLITE_OK ) goto abort_due_to_error; zData = (u8*)sMem.z; }else{ @@ -79970,8 +80462,7 @@ static u8 aZero[8]; /* This is the bogus content */ sqlite3VdbeSerialGet(aZero, t, pDest); }else{ - rc = sqlite3VdbeMemFromBtree(pCrsr, aOffset[p2], len, !pC->isTable, - pDest); + rc = sqlite3VdbeMemFromBtree(pC->uc.pCursor, aOffset[p2], len, pDest); if( rc!=SQLITE_OK ) goto abort_due_to_error; sqlite3VdbeSerialGet((const u8*)pDest->z, t, pDest); pDest->flags &= ~MEM_Ephem; @@ -80836,32 +81327,31 @@ if( pCx==0 ) goto no_mem; pCx->nullRow = 1; pCx->isEphemeral = 1; - rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBt, + rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBtx, BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5, vfsFlags); if( rc==SQLITE_OK ){ - rc = sqlite3BtreeBeginTrans(pCx->pBt, 1); + rc = sqlite3BtreeBeginTrans(pCx->pBtx, 1); } if( rc==SQLITE_OK ){ /* If a transient index is required, create it by calling ** sqlite3BtreeCreateTable() with the BTREE_BLOBKEY flag before ** opening it. If a transient table is required, just use the ** automatically created table with root-page 1 (an BLOB_INTKEY table). */ - if( (pKeyInfo = pOp->p4.pKeyInfo)!=0 ){ + if( (pCx->pKeyInfo = pKeyInfo = pOp->p4.pKeyInfo)!=0 ){ int pgno; assert( pOp->p4type==P4_KEYINFO ); - rc = sqlite3BtreeCreateTable(pCx->pBt, &pgno, BTREE_BLOBKEY | pOp->p5); + rc = sqlite3BtreeCreateTable(pCx->pBtx, &pgno, BTREE_BLOBKEY | pOp->p5); if( rc==SQLITE_OK ){ assert( pgno==MASTER_ROOT+1 ); assert( pKeyInfo->db==db ); assert( pKeyInfo->enc==ENC(db) ); - pCx->pKeyInfo = pKeyInfo; - rc = sqlite3BtreeCursor(pCx->pBt, pgno, BTREE_WRCSR, + rc = sqlite3BtreeCursor(pCx->pBtx, pgno, BTREE_WRCSR, pKeyInfo, pCx->uc.pCursor); } pCx->isTable = 0; }else{ - rc = sqlite3BtreeCursor(pCx->pBt, MASTER_ROOT, BTREE_WRCSR, + rc = sqlite3BtreeCursor(pCx->pBtx, MASTER_ROOT, BTREE_WRCSR, 0, pCx->uc.pCursor); pCx->isTable = 1; } @@ -81093,7 +81583,8 @@ if( pC->isTable ){ /* The BTREE_SEEK_EQ flag is only set on index cursors */ - assert( sqlite3BtreeCursorHasHint(pC->uc.pCursor, BTREE_SEEK_EQ)==0 ); + assert( sqlite3BtreeCursorHasHint(pC->uc.pCursor, BTREE_SEEK_EQ)==0 + || CORRUPT_DB ); /* The input value in P3 might be of any type: integer, real, string, ** blob, or NULL. But it needs to be an integer before we can do @@ -81295,10 +81786,9 @@ int ii; VdbeCursor *pC; int res; - char *pFree; + UnpackedRecord *pFree; UnpackedRecord *pIdxKey; UnpackedRecord r; - char aTempRec[ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*4 + 7]; #ifdef SQLITE_TEST if( pOp->opcode!=OP_NoConflict ) sqlite3_found_count++; @@ -81315,7 +81805,6 @@ assert( pC->eCurType==CURTYPE_BTREE ); assert( pC->uc.pCursor!=0 ); assert( pC->isTable==0 ); - pFree = 0; if( pOp->p4.i>0 ){ r.pKeyInfo = pC->pKeyInfo; r.nField = (u16)pOp->p4.i; @@ -81328,10 +81817,9 @@ } #endif pIdxKey = &r; + pFree = 0; }else{ - pIdxKey = sqlite3VdbeAllocUnpackedRecord( - pC->pKeyInfo, aTempRec, sizeof(aTempRec), &pFree - ); + pFree = pIdxKey = sqlite3VdbeAllocUnpackedRecord(pC->pKeyInfo); if( pIdxKey==0 ) goto no_mem; assert( pIn3->flags & MEM_Blob ); (void)ExpandBlob(pIn3); @@ -81351,7 +81839,7 @@ } } rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, pIdxKey, 0, 0, &res); - sqlite3DbFree(db, pFree); + if( pFree ) sqlite3DbFree(db, pFree); if( rc!=SQLITE_OK ){ goto abort_due_to_error; } @@ -81578,7 +82066,7 @@ sqlite3VdbeMemIntegerify(pMem); assert( (pMem->flags & MEM_Int)!=0 ); /* mem(P3) holds an integer */ if( pMem->u.i==MAX_ROWID || pC->useRandomRowid ){ - rc = SQLITE_FULL; /* IMP: R-12275-61338 */ + rc = SQLITE_FULL; /* IMP: R-17817-00630 */ goto abort_due_to_error; } if( vu.i+1 ){ @@ -81630,15 +82118,10 @@ ** then rowid is stored for subsequent return by the ** sqlite3_last_insert_rowid() function (otherwise it is unmodified). ** -** If the OPFLAG_USESEEKRESULT flag of P5 is set and if the result of -** the last seek operation (OP_NotExists or OP_SeekRowid) was a success, -** then this -** operation will not attempt to find the appropriate row before doing -** the insert but will instead overwrite the row that the cursor is -** currently pointing to. Presumably, the prior OP_NotExists or -** OP_SeekRowid opcode -** has already positioned the cursor correctly. This is an optimization -** that boosts performance by avoiding redundant seeks. +** If the OPFLAG_USESEEKRESULT flag of P5 is set, the implementation might +** run faster by avoiding an unnecessary seek on cursor P1. However, +** the OPFLAG_USESEEKRESULT flag must only be set if there have been no prior +** seeks on the cursor or if the most recent seek used a key equal to P3. ** ** If the OPFLAG_ISUPDATE flag is set, then this opcode is part of an ** UPDATE operation. Otherwise (if the flag is clear) then this opcode @@ -81862,6 +82345,7 @@ rc = sqlite3BtreeDelete(pC->uc.pCursor, pOp->p5); pC->cacheStatus = CACHE_STALE; + pC->seekResult = 0; if( rc ) goto abort_due_to_error; /* Invoke the update-hook if required. */ @@ -81951,26 +82435,18 @@ /* Opcode: RowData P1 P2 * * * ** Synopsis: r[P2]=data ** -** Write into register P2 the complete row data for cursor P1. +** Write into register P2 the complete row content for the row at +** which cursor P1 is currently pointing. ** There is no interpretation of the data. ** It is just copied onto the P2 register exactly as ** it is found in the database file. ** -** If the P1 cursor must be pointing to a valid row (not a NULL row) -** of a real table, not a pseudo-table. -*/ -/* Opcode: RowKey P1 P2 * * * -** Synopsis: r[P2]=key +** If cursor P1 is an index, then the content is the key of the row. +** If cursor P2 is a table, then the content extracted is the data. ** -** Write into register P2 the complete row key for cursor P1. -** There is no interpretation of the data. -** The key is copied onto the P2 register exactly as -** it is found in the database file. -** ** If the P1 cursor must be pointing to a valid row (not a NULL row) ** of a real table, not a pseudo-table. */ -case OP_RowKey: case OP_RowData: { VdbeCursor *pC; BtCursor *pCrsr; @@ -81979,19 +82455,16 @@ pOut = &aMem[pOp->p2]; memAboutToChange(p, pOut); - /* Note that RowKey and RowData are really exactly the same instruction */ assert( pOp->p1>=0 && pOp->p1nCursor ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); assert( pC->eCurType==CURTYPE_BTREE ); assert( isSorter(pC)==0 ); - assert( pC->isTable || pOp->opcode!=OP_RowData ); - assert( pC->isTable==0 || pOp->opcode==OP_RowData ); assert( pC->nullRow==0 ); assert( pC->uc.pCursor!=0 ); pCrsr = pC->uc.pCursor; - /* The OP_RowKey and OP_RowData opcodes always follow OP_NotExists or + /* The OP_RowData opcodes always follow OP_NotExists or ** OP_SeekRowid or OP_Rewind/Op_Next with no intervening instructions ** that might invalidate the cursor. ** If this where not the case, on of the following assert()s @@ -82016,11 +82489,7 @@ } pOut->n = n; MemSetTypeFlag(pOut, MEM_Blob); - if( pC->isTable==0 ){ - rc = sqlite3BtreeKey(pCrsr, 0, n, pOut->z); - }else{ - rc = sqlite3BtreeData(pCrsr, 0, n, pOut->z); - } + rc = sqlite3BtreePayload(pCrsr, 0, n, pOut->z); if( rc ) goto abort_due_to_error; pOut->enc = SQLITE_UTF8; /* In case the blob is ever cast to text */ UPDATE_MAX_BLOBSIZE(pOut); @@ -82111,6 +82580,13 @@ ** This opcode leaves the cursor configured to move in reverse order, ** from the end toward the beginning. In other words, the cursor is ** configured to use Prev, not Next. +** +** If P3 is -1, then the cursor is positioned at the end of the btree +** for the purpose of appending a new entry onto the btree. In that +** case P2 must be 0. It is assumed that the cursor is used only for +** appending and so if the cursor is valid, then the cursor must already +** be pointing at the end of the btree and so no changes are made to +** the cursor. */ case OP_Last: { /* jump */ VdbeCursor *pC; @@ -82124,23 +82600,36 @@ pCrsr = pC->uc.pCursor; res = 0; assert( pCrsr!=0 ); - rc = sqlite3BtreeLast(pCrsr, &res); - pC->nullRow = (u8)res; - pC->deferredMoveto = 0; - pC->cacheStatus = CACHE_STALE; pC->seekResult = pOp->p3; #ifdef SQLITE_DEBUG pC->seekOp = OP_Last; #endif - if( rc ) goto abort_due_to_error; - if( pOp->p2>0 ){ - VdbeBranchTaken(res!=0,2); - if( res ) goto jump_to_p2; + if( pOp->p3==0 || !sqlite3BtreeCursorIsValidNN(pCrsr) ){ + rc = sqlite3BtreeLast(pCrsr, &res); + pC->nullRow = (u8)res; + pC->deferredMoveto = 0; + pC->cacheStatus = CACHE_STALE; + if( rc ) goto abort_due_to_error; + if( pOp->p2>0 ){ + VdbeBranchTaken(res!=0,2); + if( res ) goto jump_to_p2; + } + }else{ + assert( pOp->p2==0 ); } break; } +/* Opcode: SorterSort P1 P2 * * * +** +** After all records have been inserted into the Sorter object +** identified by P1, invoke this opcode to actually do the sorting. +** Jump to P2 if there are no records to be sorted. +** +** This opcode is an alias for OP_Sort and OP_Rewind that is used +** for Sorter objects. +*/ /* Opcode: Sort P1 P2 * * * ** ** This opcode does exactly the same thing as OP_Rewind except that @@ -82268,6 +82757,13 @@ ** This opcode works just like Prev except that if cursor P1 is not ** open it behaves a no-op. */ +/* Opcode: SorterNext P1 P2 * * P5 +** +** This opcode works just like OP_Next except that P1 must be a +** sorter object for which the OP_SorterSort opcode has been +** invoked. This opcode advances the cursor to the next sorted +** record, or jumps to P2 if there are no more sorted records. +*/ case OP_SorterNext: { /* jump */ VdbeCursor *pC; int res; @@ -82324,27 +82820,41 @@ goto check_for_interrupt; } -/* Opcode: IdxInsert P1 P2 P3 * P5 +/* Opcode: IdxInsert P1 P2 P3 P4 P5 ** Synopsis: key=r[P2] ** ** Register P2 holds an SQL index key made using the ** MakeRecord instructions. This opcode writes that key ** into the index P1. Data for the entry is nil. ** -** P3 is a flag that provides a hint to the b-tree layer that this -** insert is likely to be an append. +** If P4 is not zero, then it is the number of values in the unpacked +** key of reg(P2). In that case, P3 is the index of the first register +** for the unpacked key. The availability of the unpacked key can sometimes +** be an optimization. ** +** If P5 has the OPFLAG_APPEND bit set, that is a hint to the b-tree layer +** that this insert is likely to be an append. +** ** If P5 has the OPFLAG_NCHANGE bit set, then the change counter is ** incremented by this instruction. If the OPFLAG_NCHANGE bit is clear, ** then the change counter is unchanged. ** -** If P5 has the OPFLAG_USESEEKRESULT bit set, then the cursor must have -** just done a seek to the spot where the new entry is to be inserted. -** This flag avoids doing an extra seek. +** If the OPFLAG_USESEEKRESULT flag of P5 is set, the implementation might +** run faster by avoiding an unnecessary seek on cursor P1. However, +** the OPFLAG_USESEEKRESULT flag must only be set if there have been no prior +** seeks on the cursor or if the most recent seek used a key equivalent +** to P2. ** ** This instruction only works for indices. The equivalent instruction ** for tables is OP_Insert. */ +/* Opcode: SorterInsert P1 P2 * * * +** Synopsis: key=r[P2] +** +** Register P2 holds an SQL index key made using the +** MakeRecord instructions. This opcode writes that key +** into the sorter P1. Data for the entry is nil. +*/ case OP_SorterInsert: /* in2 */ case OP_IdxInsert: { /* in2 */ VdbeCursor *pC; @@ -82366,7 +82876,10 @@ }else{ x.nKey = pIn2->n; x.pKey = pIn2->z; - rc = sqlite3BtreeInsert(pC->uc.pCursor, &x, pOp->p3, + x.aMem = aMem + pOp->p3; + x.nMem = (u16)pOp->p4.i; + rc = sqlite3BtreeInsert(pC->uc.pCursor, &x, + (pOp->p5 & OPFLAG_APPEND)!=0, ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0) ); assert( pC->deferredMoveto==0 ); @@ -82410,6 +82923,7 @@ } assert( pC->deferredMoveto==0 ); pC->cacheStatus = CACHE_STALE; + pC->seekResult = 0; break; } @@ -82779,7 +83293,7 @@ assert( iDb>=0 && iDbnDb ); assert( DbHasProperty(db, iDb, DB_SchemaLoaded) ); /* Used to be a conditional */ { - zMaster = SCHEMA_TABLE(iDb); + zMaster = MASTER_NAME; initData.db = db; initData.iDb = pOp->p1; initData.pzErrMsg = &p->zErrMsg; @@ -83290,29 +83804,42 @@ ** Otherwise, r[P2] is set to the sum of r[P1] and r[P3]. */ case OP_OffsetLimit: { /* in1, out2, in3 */ + i64 x; pIn1 = &aMem[pOp->p1]; pIn3 = &aMem[pOp->p3]; pOut = out2Prerelease(p, pOp); assert( pIn1->flags & MEM_Int ); assert( pIn3->flags & MEM_Int ); - pOut->u.i = pIn1->u.i<=0 ? -1 : pIn1->u.i+(pIn3->u.i>0?pIn3->u.i:0); + x = pIn1->u.i; + if( x<=0 || sqlite3AddInt64(&x, pIn3->u.i>0?pIn3->u.i:0) ){ + /* If the LIMIT is less than or equal to zero, loop forever. This + ** is documented. But also, if the LIMIT+OFFSET exceeds 2^63 then + ** also loop forever. This is undocumented. In fact, one could argue + ** that the loop should terminate. But assuming 1 billion iterations + ** per second (far exceeding the capabilities of any current hardware) + ** it would take nearly 300 years to actually reach the limit. So + ** looping forever is a reasonable approximation. */ + pOut->u.i = -1; + }else{ + pOut->u.i = x; + } break; } -/* Opcode: IfNotZero P1 P2 P3 * * -** Synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 +/* Opcode: IfNotZero P1 P2 * * * +** Synopsis: if r[P1]!=0 then r[P1]--, goto P2 ** ** Register P1 must contain an integer. If the content of register P1 is -** initially nonzero, then subtract P3 from the value in register P1 and -** jump to P2. If register P1 is initially zero, leave it unchanged -** and fall through. +** initially greater than zero, then decrement the value in register P1. +** If it is non-zero (negative or positive) and then also jump to P2. +** If register P1 is initially zero, leave it unchanged and fall through. */ case OP_IfNotZero: { /* jump, in1 */ pIn1 = &aMem[pOp->p1]; assert( pIn1->flags&MEM_Int ); VdbeBranchTaken(pIn1->u.i<0, 2); if( pIn1->u.i ){ - pIn1->u.i -= pOp->p3; + if( pIn1->u.i>0 ) pIn1->u.i--; goto jump_to_p2; } break; @@ -83321,13 +83848,13 @@ /* Opcode: DecrJumpZero P1 P2 * * * ** Synopsis: if (--r[P1])==0 goto P2 ** -** Register P1 must hold an integer. Decrement the value in register P1 -** then jump to P2 if the new value is exactly zero. +** Register P1 must hold an integer. Decrement the value in P1 +** and jump to P2 if the new value is exactly zero. */ case OP_DecrJumpZero: { /* jump, in1 */ pIn1 = &aMem[pOp->p1]; assert( pIn1->flags&MEM_Int ); - pIn1->u.i--; + if( pIn1->u.i>SMALLEST_INT64 ) pIn1->u.i--; VdbeBranchTaken(pIn1->u.i==0, 2); if( pIn1->u.i==0 ) goto jump_to_p2; break; @@ -83573,7 +84100,7 @@ ** file. An EXCLUSIVE lock may still be held on the database file ** after a successful return. */ - rc = sqlite3PagerCloseWal(pPager); + rc = sqlite3PagerCloseWal(pPager, db); if( rc==SQLITE_OK ){ sqlite3PagerSetJournalMode(pPager, eNew); } @@ -84596,8 +85123,7 @@ {OP_Column, 0, 0, 1}, /* 4 */ {OP_ResultRow, 1, 0, 0}, /* 5 */ {OP_Goto, 0, 2, 0}, /* 6 */ - {OP_Close, 0, 0, 0}, /* 7 */ - {OP_Halt, 0, 0, 0}, /* 8 */ + {OP_Halt, 0, 0, 0}, /* 7 */ }; Vdbe *v = (Vdbe *)pBlob->pStmt; int iDb = sqlite3SchemaToIndex(db, pTab->pSchema); @@ -84775,7 +85301,7 @@ ** Read data from a blob handle. */ SQLITE_API int sqlite3_blob_read(sqlite3_blob *pBlob, void *z, int n, int iOffset){ - return blobReadWrite(pBlob, z, n, iOffset, sqlite3BtreeData); + return blobReadWrite(pBlob, z, n, iOffset, sqlite3BtreePayloadChecked); } /* @@ -85801,7 +86327,7 @@ } #endif - assert( pCsr->pKeyInfo && pCsr->pBt==0 ); + assert( pCsr->pKeyInfo && pCsr->pBtx==0 ); assert( pCsr->eCurType==CURTYPE_SORTER ); szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nField-1)*sizeof(CollSeq*); sz = sizeof(VdbeSorter) + nWorker * sizeof(SortSubtask); @@ -86169,12 +86695,8 @@ */ static int vdbeSortAllocUnpacked(SortSubtask *pTask){ if( pTask->pUnpacked==0 ){ - char *pFree; - pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord( - pTask->pSorter->pKeyInfo, 0, 0, &pFree - ); - assert( pTask->pUnpacked==(UnpackedRecord*)pFree ); - if( pFree==0 ) return SQLITE_NOMEM_BKPT; + pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pTask->pSorter->pKeyInfo); + if( pTask->pUnpacked==0 ) return SQLITE_NOMEM_BKPT; pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nField; pTask->pUnpacked->errCode = 0; } @@ -87575,9 +88097,7 @@ r2 = pSorter->pUnpacked; pKeyInfo = pCsr->pKeyInfo; if( r2==0 ){ - char *p; - r2 = pSorter->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pKeyInfo,0,0,&p); - assert( pSorter->pUnpacked==(UnpackedRecord*)p ); + r2 = pSorter->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pKeyInfo); if( r2==0 ) return SQLITE_NOMEM_BKPT; r2->nField = nKeyCol; } @@ -90156,7 +90676,7 @@ ** with the same pLeft pointer to the pVector, but only one of them ** will own the pVector. */ - pRet = sqlite3PExpr(pParse, TK_SELECT_COLUMN, 0, 0, 0); + pRet = sqlite3PExpr(pParse, TK_SELECT_COLUMN, 0, 0); if( pRet ){ pRet->iColumn = iField; pRet->pLeft = pVector; @@ -90256,7 +90776,10 @@ u8 opx = op; int addrDone = sqlite3VdbeMakeLabel(v); - assert( nLeft==sqlite3ExprVectorSize(pRight) ); + if( nLeft!=sqlite3ExprVectorSize(pRight) ){ + sqlite3ErrorMsg(pParse, "row value misused"); + return; + } assert( pExpr->op==TK_EQ || pExpr->op==TK_NE || pExpr->op==TK_IS || pExpr->op==TK_ISNOT || pExpr->op==TK_LT || pExpr->op==TK_GT @@ -90548,15 +91071,19 @@ Parse *pParse, /* Parsing context */ int op, /* Expression opcode */ Expr *pLeft, /* Left operand */ - Expr *pRight, /* Right operand */ - const Token *pToken /* Argument token */ + Expr *pRight /* Right operand */ ){ Expr *p; if( op==TK_AND && pParse->nErr==0 ){ /* Take advantage of short-circuit false optimization for AND */ p = sqlite3ExprAnd(pParse->db, pLeft, pRight); }else{ - p = sqlite3ExprAlloc(pParse->db, op & TKFLG_MASK, pToken, 1); + p = sqlite3DbMallocRawNN(pParse->db, sizeof(Expr)); + if( p ){ + memset(p, 0, sizeof(Expr)); + p->op = op & TKFLG_MASK; + p->iAgg = -1; + } sqlite3ExprAttachSubtrees(pParse->db, p, pLeft, pRight); } if( p ) { @@ -90659,7 +91186,7 @@ ** variable number. ** ** Wildcards of the form "?nnn" are assigned the number "nnn". We make -** sure "nnn" is not too be to avoid a denial of service attack when +** sure "nnn" is not too big to avoid a denial of service attack when ** the SQL statement comes from an external source. ** ** Wildcards of the form ":aaa", "@aaa", or "$aaa" are assigned the same number @@ -90670,6 +91197,7 @@ SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr, u32 n){ sqlite3 *db = pParse->db; const char *z; + ynVar x; if( pExpr==0 ) return; assert( !ExprHasProperty(pExpr, EP_IntValue|EP_Reduced|EP_TokenOnly) ); @@ -90680,9 +91208,9 @@ if( z[1]==0 ){ /* Wildcard of the form "?". Assign the next variable number */ assert( z[0]=='?' ); - pExpr->iColumn = (ynVar)(++pParse->nVar); + x = (ynVar)(++pParse->nVar); }else{ - ynVar x; + int doAdd = 0; if( z[0]=='?' ){ /* Wildcard of the form "?nnn". Convert "nnn" to an integer and ** use it as the variable number */ @@ -90698,40 +91226,29 @@ db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]); return; } - if( i>pParse->nVar ){ - pParse->nVar = (int)i; + if( x>pParse->nVar ){ + pParse->nVar = (int)x; + doAdd = 1; + }else if( sqlite3VListNumToName(pParse->pVList, x)==0 ){ + doAdd = 1; } }else{ /* Wildcards like ":aaa", "$aaa" or "@aaa". Reuse the same variable ** number as the prior appearance of the same name, or if the name ** has never appeared before, reuse the same variable number */ - ynVar i; - for(i=x=0; inzVar; i++){ - if( pParse->azVar[i] && strcmp(pParse->azVar[i],z)==0 ){ - x = (ynVar)i+1; - break; - } + x = (ynVar)sqlite3VListNameToNum(pParse->pVList, z, n); + if( x==0 ){ + x = (ynVar)(++pParse->nVar); + doAdd = 1; } - if( x==0 ) x = (ynVar)(++pParse->nVar); } - pExpr->iColumn = x; - if( x>pParse->nzVar ){ - char **a; - a = sqlite3DbRealloc(db, pParse->azVar, x*sizeof(a[0])); - if( a==0 ){ - assert( db->mallocFailed ); /* Error reported through mallocFailed */ - return; - } - pParse->azVar = a; - memset(&a[pParse->nzVar], 0, (x-pParse->nzVar)*sizeof(a[0])); - pParse->nzVar = x; + if( doAdd ){ + pParse->pVList = sqlite3VListAdd(db, pParse->pVList, z, n, x); } - if( pParse->azVar[x-1]==0 ){ - pParse->azVar[x-1] = sqlite3DbStrNDup(db, z, n); - } - } - if( pParse->nVar>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){ + } + pExpr->iColumn = x; + if( x>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){ sqlite3ErrorMsg(pParse, "too many SQL variables"); } } @@ -91090,7 +91607,7 @@ } pTab = pNewItem->pTab = pOldItem->pTab; if( pTab ){ - pTab->nRef++; + pTab->nTabRef++; } pNewItem->pSelect = sqlite3SelectDup(db, pOldItem->pSelect, flags); pNewItem->pOn = sqlite3ExprDup(db, pOldItem->pOn, flags); @@ -92081,6 +92598,28 @@ #endif /* +** Expression pExpr is a vector that has been used in a context where +** it is not permitted. If pExpr is a sub-select vector, this routine +** loads the Parse object with a message of the form: +** +** "sub-select returns N columns - expected 1" +** +** Or, if it is a regular scalar vector: +** +** "row value misused" +*/ +SQLITE_PRIVATE void sqlite3VectorErrorMsg(Parse *pParse, Expr *pExpr){ +#ifndef SQLITE_OMIT_SUBQUERY + if( pExpr->flags & EP_xIsSelect ){ + sqlite3SubselectError(pParse, pExpr->x.pSelect->pEList->nExpr, 1); + }else +#endif + { + sqlite3ErrorMsg(pParse, "row value misused"); + } +} + +/* ** Generate code for scalar subqueries used as a subquery expression, EXISTS, ** or IN operators. Examples: ** @@ -92267,7 +92806,7 @@ }else{ sqlite3VdbeAddOp4(v, OP_MakeRecord, r3, 1, r2, &affinity, 1); sqlite3ExprCacheAffinityChange(pParse, r3, 1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, pExpr->iTable, r2); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pExpr->iTable, r2, r3, 1); } } } @@ -92362,11 +92901,7 @@ return 1; } }else if( nVector!=1 ){ - if( (pIn->pLeft->flags & EP_xIsSelect) ){ - sqlite3SubselectError(pParse, nVector, 1); - }else{ - sqlite3ErrorMsg(pParse, "row value misused"); - } + sqlite3VectorErrorMsg(pParse, pIn->pLeft); return 1; } return 0; @@ -92671,22 +93206,22 @@ const char *z = pExpr->u.zToken; assert( z!=0 ); c = sqlite3DecOrHexToI64(z, &value); - if( c==0 || (c==2 && negFlag) ){ - if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } - sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, iMem, 0, (u8*)&value, P4_INT64); - }else{ + if( c==1 || (c==2 && !negFlag) || (negFlag && value==SMALLEST_INT64)){ #ifdef SQLITE_OMIT_FLOATING_POINT sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z); #else #ifndef SQLITE_OMIT_HEX_INTEGER if( sqlite3_strnicmp(z,"0x",2)==0 ){ - sqlite3ErrorMsg(pParse, "hex literal too big: %s", z); + sqlite3ErrorMsg(pParse, "hex literal too big: %s%s", negFlag?"-":"",z); }else #endif { codeReal(v, z, negFlag, iMem); } #endif + }else{ + if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } + sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, iMem, 0, (u8*)&value, P4_INT64); } } } @@ -93137,9 +93672,10 @@ assert( pExpr->u.zToken[0]!=0 ); sqlite3VdbeAddOp2(v, OP_Variable, pExpr->iColumn, target); if( pExpr->u.zToken[1]!=0 ){ - assert( pExpr->u.zToken[0]=='?' - || strcmp(pExpr->u.zToken, pParse->azVar[pExpr->iColumn-1])==0 ); - sqlite3VdbeChangeP4(v, -1, pParse->azVar[pExpr->iColumn-1], P4_STATIC); + const char *z = sqlite3VListNumToName(pParse->pVList, pExpr->iColumn); + assert( pExpr->u.zToken[0]=='?' || strcmp(pExpr->u.zToken, z)==0 ); + pParse->pVList[0] = 0; /* Indicate VList may no longer be enlarged */ + sqlite3VdbeAppendP4(v, (char*)z, P4_STATIC); } return target; } @@ -93815,8 +94351,13 @@ if( !ConstFactorOk(pParse) ) flags &= ~SQLITE_ECEL_FACTOR; for(pItem=pList->a, i=0; ipExpr; - if( (flags & SQLITE_ECEL_REF)!=0 && (j = pList->a[i].u.x.iOrderByCol)>0 ){ - sqlite3VdbeAddOp2(v, copyOp, j+srcReg-1, target+i); + if( (flags & SQLITE_ECEL_REF)!=0 && (j = pItem->u.x.iOrderByCol)>0 ){ + if( flags & SQLITE_ECEL_OMITREF ){ + i--; + n--; + }else{ + sqlite3VdbeAddOp2(v, copyOp, j+srcReg-1, target+i); + } }else if( (flags & SQLITE_ECEL_FACTOR)!=0 && sqlite3ExprIsConstant(pExpr) ){ sqlite3ExprCodeAtInit(pParse, pExpr, target+i, 0); }else{ @@ -93891,6 +94432,11 @@ if( xJump ){ xJump(pParse, &exprAnd, dest, jumpIfNull); }else{ + /* Mark the expression is being from the ON or USING clause of a join + ** so that the sqlite3ExprCodeTarget() routine will not attempt to move + ** it into the Parse.pConstExpr list. We should use a new bit for this, + ** for clarity, but we are out of bits in the Expr.flags field so we + ** have to reuse the EP_FromJoin bit. Bummer. */ exprX.flags |= EP_FromJoin; sqlite3ExprCodeTarget(pParse, &exprAnd, dest); } @@ -94329,11 +94875,10 @@ ){ return 1; } - if( pE2->op==TK_NOTNULL - && sqlite3ExprCompare(pE1->pLeft, pE2->pLeft, iTab)==0 - && (pE1->op!=TK_ISNULL && pE1->op!=TK_IS) - ){ - return 1; + if( pE2->op==TK_NOTNULL && pE1->op!=TK_ISNULL && pE1->op!=TK_IS ){ + Expr *pX = sqlite3ExprSkipCollate(pE1->pLeft); + testcase( pX!=pE1->pLeft ); + if( sqlite3ExprCompare(pX, pE2->pLeft, iTab)==0 ) return 1; } return 0; } @@ -95255,7 +95800,7 @@ sqlite3NestedParse(pParse, "UPDATE \"%w\".%s SET " "sql = sqlite_rename_parent(sql, %Q, %Q) " - "WHERE %s;", zDb, SCHEMA_TABLE(iDb), zTabName, zName, zWhere); + "WHERE %s;", zDb, MASTER_NAME, zTabName, zName, zWhere); sqlite3DbFree(db, zWhere); } } @@ -95279,7 +95824,7 @@ "ELSE name END " "WHERE tbl_name=%Q COLLATE nocase AND " "(type='table' OR type='index' OR type='trigger');", - zDb, SCHEMA_TABLE(iDb), zName, zName, zName, + zDb, MASTER_NAME, zName, zName, zName, #ifndef SQLITE_OMIT_TRIGGER zName, #endif @@ -95440,7 +95985,7 @@ "UPDATE \"%w\".%s SET " "sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) " "WHERE type = 'table' AND name = %Q", - zDb, SCHEMA_TABLE(iDb), pNew->addColOffset, zCol, pNew->addColOffset+1, + zDb, MASTER_NAME, pNew->addColOffset, zCol, pNew->addColOffset+1, zTab ); sqlite3DbFree(db, zCol); @@ -95524,7 +96069,7 @@ pNew = (Table*)sqlite3DbMallocZero(db, sizeof(Table)); if( !pNew ) goto exit_begin_add_column; pParse->pNewTable = pNew; - pNew->nRef = 1; + pNew->nTabRef = 1; pNew->nCol = pTab->nCol; assert( pNew->nCol>0 ); nAlloc = (((pNew->nCol-1)/8)*8)+8; @@ -95544,7 +96089,7 @@ } pNew->pSchema = db->aDb[iDb].pSchema; pNew->addColOffset = pTab->addColOffset; - pNew->nRef = 1; + pNew->nTabRef = 1; /* Begin a transaction and increment the schema cookie. */ sqlite3BeginWriteOperation(pParse, 0, iDb); @@ -97328,7 +97873,9 @@ sqlite3_finalize(pStmt); return SQLITE_NOMEM_BKPT; } - memcpy(pSample->p, sqlite3_column_blob(pStmt, 4), pSample->n); + if( pSample->n ){ + memcpy(pSample->p, sqlite3_column_blob(pStmt, 4), pSample->n); + } pIdx->nSample++; } rc = sqlite3_finalize(pStmt); @@ -98331,10 +98878,10 @@ ** codeTableLocks() functions. */ struct TableLock { - int iDb; /* The database containing the table to be locked */ - int iTab; /* The root page of the table to be locked */ - u8 isWriteLock; /* True for write lock. False for a read lock */ - const char *zName; /* Name of the table */ + int iDb; /* The database containing the table to be locked */ + int iTab; /* The root page of the table to be locked */ + u8 isWriteLock; /* True for write lock. False for a read lock */ + const char *zLockName; /* Name of the table */ }; /* @@ -98360,6 +98907,8 @@ TableLock *p; assert( iDb>=0 ); + if( iDb==1 ) return; + if( !sqlite3BtreeSharable(pParse->db->aDb[iDb].pBt) ) return; for(i=0; inTableLock; i++){ p = &pToplevel->aTableLock[i]; if( p->iDb==iDb && p->iTab==iTab ){ @@ -98376,7 +98925,7 @@ p->iDb = iDb; p->iTab = iTab; p->isWriteLock = isWriteLock; - p->zName = zName; + p->zLockName = zName; }else{ pToplevel->nTableLock = 0; sqlite3OomFault(pToplevel->db); @@ -98398,7 +98947,7 @@ TableLock *p = &pParse->aTableLock[i]; int p1 = p->iDb; sqlite3VdbeAddOp4(pVdbe, OP_TableLock, p1, p->iTab, p->isWriteLock, - p->zName, P4_STATIC); + p->zLockName, P4_STATIC); } } #else @@ -98607,15 +99156,22 @@ return 0; } #endif - for(i=OMIT_TEMPDB; inDb; i++){ - int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ - if( zDatabase==0 || sqlite3StrICmp(zDatabase, db->aDb[j].zDbSName)==0 ){ - assert( sqlite3SchemaMutexHeld(db, j, 0) ); - p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName); - if( p ) break; + while(1){ + for(i=OMIT_TEMPDB; inDb; i++){ + int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ + if( zDatabase==0 || sqlite3StrICmp(zDatabase, db->aDb[j].zDbSName)==0 ){ + assert( sqlite3SchemaMutexHeld(db, j, 0) ); + p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName); + if( p ) return p; + } } + /* Not found. If the name we were looking for was temp.sqlite_master + ** then change the name to sqlite_temp_master and try again. */ + if( sqlite3StrICmp(zName, MASTER_NAME)!=0 ) break; + if( sqlite3_stricmp(zDatabase, db->aDb[1].zDbSName)!=0 ) break; + zName = TEMP_MASTER_NAME; } - return p; + return 0; } /* @@ -98651,6 +99207,9 @@ ** CREATE, then check to see if it is the name of an virtual table that ** can be an eponymous virtual table. */ Module *pMod = (Module*)sqlite3HashFind(&pParse->db->aModule, zName); + if( pMod==0 && sqlite3_strnicmp(zName, "pragma_", 7)==0 ){ + pMod = sqlite3PragmaVtabRegister(pParse->db, zName); + } if( pMod && sqlite3VtabEponymousTableInit(pParse, pMod) ){ return pMod->pEpoTab; } @@ -98933,7 +99492,7 @@ SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){ /* Do not delete the table until the reference count reaches zero. */ if( !pTable ) return; - if( ((!db || db->pnBytesFreed==0) && (--pTable->nRef)>0) ) return; + if( ((!db || db->pnBytesFreed==0) && (--pTable->nTabRef)>0) ) return; deleteTable(db, pTable); } @@ -98987,7 +99546,7 @@ */ SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *p, int iDb){ Vdbe *v = sqlite3GetVdbe(p); - sqlite3TableLock(p, iDb, MASTER_ROOT, 1, SCHEMA_TABLE(iDb)); + sqlite3TableLock(p, iDb, MASTER_ROOT, 1, MASTER_NAME); sqlite3VdbeAddOp4Int(v, OP_OpenWrite, 0, MASTER_ROOT, iDb, 5); if( p->nTab==0 ){ p->nTab = 1; @@ -99005,7 +99564,10 @@ if( zName ){ Db *pDb; for(i=(db->nDb-1), pDb=&db->aDb[i]; i>=0; i--, pDb--){ - if( 0==sqlite3StrICmp(pDb->zDbSName, zName) ) break; + if( 0==sqlite3_stricmp(pDb->zDbSName, zName) ) break; + /* "main" is always an acceptable alias for the primary database + ** even if it has been renamed using SQLITE_DBCONFIG_MAINDBNAME. */ + if( i==0 && 0==sqlite3_stricmp("main", zName) ) break; } } return i; @@ -99224,7 +99786,7 @@ pTable->zName = zName; pTable->iPKey = -1; pTable->pSchema = db->aDb[iDb].pSchema; - pTable->nRef = 1; + pTable->nTabRef = 1; pTable->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); assert( pParse->pNewTable==0 ); pParse->pNewTable = pTable; @@ -100290,7 +100852,7 @@ "UPDATE %Q.%s " "SET type='%s', name=%Q, tbl_name=%Q, rootpage=#%d, sql=%Q " "WHERE rowid=#%d", - db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), + db->aDb[iDb].zDbSName, MASTER_NAME, zType, p->zName, p->zName, @@ -100627,7 +101189,7 @@ */ sqlite3NestedParse(pParse, "UPDATE %Q.%s SET rootpage=%d WHERE #%d AND rootpage=#%d", - pParse->db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), iTable, r1, r1); + pParse->db->aDb[iDb].zDbSName, MASTER_NAME, iTable, r1, r1); #endif sqlite3ReleaseTempReg(pParse, r1); } @@ -100770,7 +101332,7 @@ */ sqlite3NestedParse(pParse, "DELETE FROM %Q.%s WHERE tbl_name=%Q and type!='trigger'", - pDb->zDbSName, SCHEMA_TABLE(iDb), pTab->zName); + pDb->zDbSName, MASTER_NAME, pTab->zName); if( !isView && !IsVirtual(pTab) ){ destroyTable(pParse, pTab); } @@ -101117,7 +101679,7 @@ } sqlite3VdbeAddOp3(v, OP_SorterData, iSorter, regRecord, iIdx); sqlite3VdbeAddOp3(v, OP_Last, iIdx, 0, -1); - sqlite3VdbeAddOp3(v, OP_IdxInsert, iIdx, regRecord, 0); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdx, regRecord); sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); sqlite3ReleaseTempReg(pParse, regRecord); sqlite3VdbeAddOp2(v, OP_SorterNext, iSorter, addr2); VdbeCoverage(v); @@ -101662,7 +102224,7 @@ */ sqlite3NestedParse(pParse, "INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);", - db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), + db->aDb[iDb].zDbSName, MASTER_NAME, pIndex->zName, pTab->zName, iMem, @@ -101814,7 +102376,7 @@ sqlite3BeginWriteOperation(pParse, 1, iDb); sqlite3NestedParse(pParse, "DELETE FROM %Q.%s WHERE name=%Q AND type='index'", - db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), pIndex->zName + db->aDb[iDb].zDbSName, MASTER_NAME, pIndex->zName ); sqlite3ClearStatTables(pParse, iDb, "idx", pIndex->zName); sqlite3ChangeCookie(pParse, iDb); @@ -101957,7 +102519,7 @@ /* Allocate additional space if needed */ if( (u32)pSrc->nSrc+nExtra>pSrc->nAlloc ){ SrcList *pNew; - int nAlloc = pSrc->nSrc+nExtra; + int nAlloc = pSrc->nSrc*2+nExtra; int nGot; pNew = sqlite3DbRealloc(db, pSrc, sizeof(*pSrc) + (nAlloc-1)*sizeof(pSrc->a[0]) ); @@ -102035,9 +102597,12 @@ pList = sqlite3DbMallocRawNN(db, sizeof(SrcList) ); if( pList==0 ) return 0; pList->nAlloc = 1; - pList->nSrc = 0; + pList->nSrc = 1; + memset(&pList->a[0], 0, sizeof(pList->a[0])); + pList->a[0].iCursor = -1; + }else{ + pList = sqlite3SrcListEnlarge(db, pList, 1, pList->nSrc); } - pList = sqlite3SrcListEnlarge(db, pList, 1, pList->nSrc); if( db->mallocFailed ){ sqlite3SrcListDelete(db, pList); return 0; @@ -103252,7 +103817,7 @@ sqlite3DeleteTable(pParse->db, pItem->pTab); pItem->pTab = pTab; if( pTab ){ - pTab->nRef++; + pTab->nTabRef++; } if( sqlite3IndexedByLookup(pParse, pItem) ){ pTab = 0; @@ -103380,7 +103945,7 @@ ** ); */ - pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0); + pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0); if( pSelectRowid == 0 ) goto limit_where_cleanup; pEList = sqlite3ExprListAppend(pParse, 0, pSelectRowid); if( pEList == 0 ) goto limit_where_cleanup; @@ -103399,8 +103964,8 @@ if( pSelect == 0 ) return 0; /* now generate the new WHERE rowid IN clause for the DELETE/UDPATE */ - pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0); - pInClause = pWhereRowid ? sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0, 0) : 0; + pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0); + pInClause = pWhereRowid ? sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0) : 0; sqlite3PExprAddSelect(pParse, pInClause, pSelect); return pInClause; @@ -103665,7 +104230,7 @@ nKey = 0; /* Zero tells OP_Found to use a composite key */ sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, iKey, sqlite3IndexAffinityStr(pParse->db, pPk), nPk); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iEphCur, iKey); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEphCur, iKey, iPk, nPk); }else{ /* Add the rowid of the row to be deleted to the RowSet */ nKey = 1; /* OP_Seek always uses a single rowid */ @@ -103711,7 +104276,7 @@ } }else if( pPk ){ addrLoop = sqlite3VdbeAddOp1(v, OP_Rewind, iEphCur); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_RowKey, iEphCur, iKey); + sqlite3VdbeAddOp2(v, OP_RowData, iEphCur, iKey); assert( nKey==0 ); /* OP_Found will use a composite key */ }else{ addrLoop = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, 0, iKey); @@ -103754,14 +104319,6 @@ sqlite3VdbeGoto(v, addrLoop); sqlite3VdbeJumpHere(v, addrLoop); } - - /* Close the cursors open on the table and its indexes. */ - if( !isView && !IsVirtual(pTab) ){ - if( !pPk ) sqlite3VdbeAddOp1(v, OP_Close, iDataCur); - for(i=0, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){ - sqlite3VdbeAddOp1(v, OP_Close, iIdxCur + i); - } - } } /* End non-truncate path */ /* Update the sqlite_sequence table by storing the content of the @@ -103936,7 +104493,7 @@ u8 p5 = 0; sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,iIdxNoSeek); sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0)); - sqlite3VdbeChangeP4(v, -1, (char*)pTab, P4_TABLE); + sqlite3VdbeAppendP4(v, (char*)pTab, P4_TABLE); if( eMode!=ONEPASS_OFF ){ sqlite3VdbeChangeP5(v, OPFLAG_AUXDELETE); } @@ -104315,25 +104872,28 @@ if( typeHaystack==SQLITE_NULL || typeNeedle==SQLITE_NULL ) return; nHaystack = sqlite3_value_bytes(argv[0]); nNeedle = sqlite3_value_bytes(argv[1]); - if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){ - zHaystack = sqlite3_value_blob(argv[0]); - zNeedle = sqlite3_value_blob(argv[1]); - isText = 0; - }else{ - zHaystack = sqlite3_value_text(argv[0]); - zNeedle = sqlite3_value_text(argv[1]); - isText = 1; - if( zNeedle==0 ) return; - assert( zHaystack ); + if( nNeedle>0 ){ + if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){ + zHaystack = sqlite3_value_blob(argv[0]); + zNeedle = sqlite3_value_blob(argv[1]); + assert( zNeedle!=0 ); + assert( zHaystack!=0 || nHaystack==0 ); + isText = 0; + }else{ + zHaystack = sqlite3_value_text(argv[0]); + zNeedle = sqlite3_value_text(argv[1]); + isText = 1; + if( zHaystack==0 || zNeedle==0 ) return; + } + while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){ + N++; + do{ + nHaystack--; + zHaystack++; + }while( isText && (zHaystack[0]&0xc0)==0x80 ); + } + if( nNeedle>nHaystack ) N = 0; } - while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){ - N++; - do{ - nHaystack--; - zHaystack++; - }while( isText && (zHaystack[0]&0xc0)==0x80 ); - } - if( nNeedle>nHaystack ) N = 0; sqlite3_result_int(context, N); } @@ -104713,10 +105273,20 @@ static const struct compareInfo likeInfoAlt = { '%', '_', 0, 0 }; /* -** Compare two UTF-8 strings for equality where the first string can -** potentially be a "glob" or "like" expression. Return true (1) if they -** are the same and false (0) if they are different. +** Possible error returns from patternMatch() +*/ +#define SQLITE_MATCH 0 +#define SQLITE_NOMATCH 1 +#define SQLITE_NOWILDCARDMATCH 2 + +/* +** Compare two UTF-8 strings for equality where the first string is +** a GLOB or LIKE expression. Return values: ** +** SQLITE_MATCH: Match +** SQLITE_NOMATCH: No match +** SQLITE_NOWILDCARDMATCH: No match in spite of having * or % wildcards. +** ** Globbing rules: ** ** '*' Matches any sequence of zero or more characters. @@ -104766,30 +105336,31 @@ ** single character of the input string for each "?" skipped */ while( (c=Utf8Read(zPattern)) == matchAll || c == matchOne ){ if( c==matchOne && sqlite3Utf8Read(&zString)==0 ){ - return 0; + return SQLITE_NOWILDCARDMATCH; } } if( c==0 ){ - return 1; /* "*" at the end of the pattern matches */ + return SQLITE_MATCH; /* "*" at the end of the pattern matches */ }else if( c==matchOther ){ if( pInfo->matchSet==0 ){ c = sqlite3Utf8Read(&zPattern); - if( c==0 ) return 0; + if( c==0 ) return SQLITE_NOWILDCARDMATCH; }else{ /* "[...]" immediately follows the "*". We have to do a slow ** recursive search in this case, but it is an unusual case. */ assert( matchOther<0x80 ); /* '[' is a single-byte character */ - while( *zString - && patternCompare(&zPattern[-1],zString,pInfo,matchOther)==0 ){ + while( *zString ){ + int bMatch = patternCompare(&zPattern[-1],zString,pInfo,matchOther); + if( bMatch!=SQLITE_NOMATCH ) return bMatch; SQLITE_SKIP_UTF8(zString); } - return *zString!=0; + return SQLITE_NOWILDCARDMATCH; } } /* At this point variable c contains the first character of the ** pattern string past the "*". Search in the input string for the - ** first matching character and recursively contine the match from + ** first matching character and recursively continue the match from ** that point. ** ** For a case-insensitive search, set variable cx to be the same as @@ -104798,6 +105369,7 @@ */ if( c<=0x80 ){ u32 cx; + int bMatch; if( noCase ){ cx = sqlite3Toupper(c); c = sqlite3Tolower(c); @@ -104806,27 +105378,30 @@ } while( (c2 = *(zString++))!=0 ){ if( c2!=c && c2!=cx ) continue; - if( patternCompare(zPattern,zString,pInfo,matchOther) ) return 1; + bMatch = patternCompare(zPattern,zString,pInfo,matchOther); + if( bMatch!=SQLITE_NOMATCH ) return bMatch; } }else{ + int bMatch; while( (c2 = Utf8Read(zString))!=0 ){ if( c2!=c ) continue; - if( patternCompare(zPattern,zString,pInfo,matchOther) ) return 1; + bMatch = patternCompare(zPattern,zString,pInfo,matchOther); + if( bMatch!=SQLITE_NOMATCH ) return bMatch; } } - return 0; + return SQLITE_NOWILDCARDMATCH; } if( c==matchOther ){ if( pInfo->matchSet==0 ){ c = sqlite3Utf8Read(&zPattern); - if( c==0 ) return 0; + if( c==0 ) return SQLITE_NOMATCH; zEscaped = zPattern; }else{ u32 prior_c = 0; int seen = 0; int invert = 0; c = sqlite3Utf8Read(&zString); - if( c==0 ) return 0; + if( c==0 ) return SQLITE_NOMATCH; c2 = sqlite3Utf8Read(&zPattern); if( c2=='^' ){ invert = 1; @@ -104850,7 +105425,7 @@ c2 = sqlite3Utf8Read(&zPattern); } if( c2==0 || (seen ^ invert)==0 ){ - return 0; + return SQLITE_NOMATCH; } continue; } @@ -104861,23 +105436,25 @@ continue; } if( c==matchOne && zPattern!=zEscaped && c2!=0 ) continue; - return 0; + return SQLITE_NOMATCH; } - return *zString==0; + return *zString==0 ? SQLITE_MATCH : SQLITE_NOMATCH; } /* -** The sqlite3_strglob() interface. +** The sqlite3_strglob() interface. Return 0 on a match (like strcmp()) and +** non-zero if there is no match. */ SQLITE_API int sqlite3_strglob(const char *zGlobPattern, const char *zString){ - return patternCompare((u8*)zGlobPattern, (u8*)zString, &globInfo, '[')==0; + return patternCompare((u8*)zGlobPattern, (u8*)zString, &globInfo, '['); } /* -** The sqlite3_strlike() interface. +** The sqlite3_strlike() interface. Return 0 on a match and non-zero for +** a miss - like strcmp(). */ SQLITE_API int sqlite3_strlike(const char *zPattern, const char *zStr, unsigned int esc){ - return patternCompare((u8*)zPattern, (u8*)zStr, &likeInfoNorm, esc)==0; + return patternCompare((u8*)zPattern, (u8*)zStr, &likeInfoNorm, esc); } /* @@ -104958,7 +105535,7 @@ #ifdef SQLITE_TEST sqlite3_like_count++; #endif - sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape)); + sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape)==SQLITE_MATCH); } } @@ -105729,7 +106306,7 @@ zSep = ","; nSep = 1; } - if( nSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep); + if( zSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep); } zVal = (char*)sqlite3_value_text(argv[0]); nVal = sqlite3_value_bytes(argv[0]); @@ -106192,7 +106769,7 @@ } for(pIdx=pParent->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) ){ + if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) && pIdx->pPartIdxWhere==0 ){ /* pIdx is a UNIQUE index (or a PRIMARY KEY) and has the right number ** of columns. If each indexed column corresponds to a foreign key ** column of pFKey, then this index is a winner. */ @@ -106551,7 +107128,7 @@ assert( iCol>=0 ); zCol = pFKey->pFrom->aCol[iCol].zName; pRight = sqlite3Expr(db, TK_ID, zCol); - pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0); + pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight); pWhere = sqlite3ExprAnd(db, pWhere, pEq); } @@ -106573,7 +107150,7 @@ if( HasRowid(pTab) ){ pLeft = exprTableRegister(pParse, pTab, regData, -1); pRight = exprTableColumn(db, pTab, pSrc->a[0].iCursor, -1); - pNe = sqlite3PExpr(pParse, TK_NE, pLeft, pRight, 0); + pNe = sqlite3PExpr(pParse, TK_NE, pLeft, pRight); }else{ Expr *pEq, *pAll = 0; Index *pPk = sqlite3PrimaryKeyIndex(pTab); @@ -106583,10 +107160,10 @@ assert( iCol>=0 ); pLeft = exprTableRegister(pParse, pTab, regData, iCol); pRight = exprTableColumn(db, pTab, pSrc->a[0].iCursor, iCol); - pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0); + pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight); pAll = sqlite3ExprAnd(db, pAll, pEq); } - pNe = sqlite3PExpr(pParse, TK_NOT, pAll, 0, 0); + pNe = sqlite3PExpr(pParse, TK_NOT, pAll, 0); } pWhere = sqlite3ExprAnd(db, pWhere, pNe); } @@ -106974,7 +107551,7 @@ struct SrcList_item *pItem = pSrc->a; pItem->pTab = pFKey->pFrom; pItem->zName = pFKey->pFrom->zName; - pItem->pTab->nRef++; + pItem->pTab->nTabRef++; pItem->iCursor = pParse->nTab++; if( regNew!=0 ){ @@ -107172,10 +107749,9 @@ pEq = sqlite3PExpr(pParse, TK_EQ, sqlite3PExpr(pParse, TK_DOT, sqlite3ExprAlloc(db, TK_ID, &tOld, 0), - sqlite3ExprAlloc(db, TK_ID, &tToCol, 0) - , 0), + sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)), sqlite3ExprAlloc(db, TK_ID, &tFromCol, 0) - , 0); + ); pWhere = sqlite3ExprAnd(db, pWhere, pEq); /* For ON UPDATE, construct the next term of the WHEN clause. @@ -107187,13 +107763,11 @@ pEq = sqlite3PExpr(pParse, TK_IS, sqlite3PExpr(pParse, TK_DOT, sqlite3ExprAlloc(db, TK_ID, &tOld, 0), - sqlite3ExprAlloc(db, TK_ID, &tToCol, 0), - 0), + sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)), sqlite3PExpr(pParse, TK_DOT, sqlite3ExprAlloc(db, TK_ID, &tNew, 0), - sqlite3ExprAlloc(db, TK_ID, &tToCol, 0), - 0), - 0); + sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)) + ); pWhen = sqlite3ExprAnd(db, pWhen, pEq); } @@ -107202,8 +107776,7 @@ if( action==OE_Cascade ){ pNew = sqlite3PExpr(pParse, TK_DOT, sqlite3ExprAlloc(db, TK_ID, &tNew, 0), - sqlite3ExprAlloc(db, TK_ID, &tToCol, 0) - , 0); + sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)); }else if( action==OE_SetDflt ){ Expr *pDflt = pFKey->pFrom->aCol[iFromCol].pDflt; if( pDflt ){ @@ -107259,7 +107832,7 @@ pStep->pExprList = sqlite3ExprListDup(db, pList, EXPRDUP_REDUCE); pStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); if( pWhen ){ - pWhen = sqlite3PExpr(pParse, TK_NOT, pWhen, 0, 0); + pWhen = sqlite3PExpr(pParse, TK_NOT, pWhen, 0); pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); } } @@ -107863,7 +108436,7 @@ sqlite3 *db; /* The main database structure */ Table *pTab; /* The table to insert into. aka TABLE */ char *zTab; /* Name of the table into which we are inserting */ - int i, j, idx; /* Loop counters */ + int i, j; /* Loop counters */ Vdbe *v; /* Generate code into this virtual machine */ Index *pIdx; /* For looping over indices of the table */ int nColumn; /* Number of columns in the data */ @@ -108170,8 +108743,10 @@ if( aRegIdx==0 ){ goto insert_cleanup; } - for(i=0; ipIndex; ipNext, i++){ + assert( pIdx ); aRegIdx[i] = ++pParse->nMem; + pParse->nMem += pIdx->nColumn; } } @@ -108373,12 +108948,26 @@ #endif { int isReplace; /* Set to true if constraints may cause a replace */ + int bUseSeek; /* True to use OPFLAG_SEEKRESULT */ sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace, 0 ); sqlite3FkCheck(pParse, pTab, 0, regIns, 0, 0); + + /* Set the OPFLAG_USESEEKRESULT flag if either (a) there are no REPLACE + ** constraints or (b) there are no triggers and this table is not a + ** parent table in a foreign key constraint. It is safe to set the + ** flag in the second case as if any REPLACE constraint is hit, an + ** OP_Delete or OP_IdxDelete instruction will be executed on each + ** cursor that is disturbed. And these instructions both clear the + ** VdbeCursor.seekResult variable, disabling the OPFLAG_USESEEKRESULT + ** functionality. */ + bUseSeek = (isReplace==0 || (pTrigger==0 && + ((db->flags & SQLITE_ForeignKeys)==0 || sqlite3FkReferences(pTab)==0) + )); sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur, - regIns, aRegIdx, 0, appendFlag, isReplace==0); + regIns, aRegIdx, 0, appendFlag, bUseSeek + ); } } @@ -108407,14 +108996,6 @@ sqlite3VdbeJumpHere(v, addrInsTop); } - if( !IsVirtual(pTab) && !isView ){ - /* Close all tables opened */ - if( iDataCurpIndex; pIdx; pIdx=pIdx->pNext, idx++){ - sqlite3VdbeAddOp1(v, OP_Close, idx+iIdxCur); - } - } - insert_end: /* Update the sqlite_sequence table by storing the content of the ** maximum rowid counter values recorded while inserting into @@ -108621,7 +109202,6 @@ int ipkBottom = 0; /* Bottom of the rowid change constraint check */ u8 isUpdate; /* True if this is an UPDATE operation */ u8 bAffinityDone = 0; /* True if the OP_Affinity operation has been run */ - int regRowid = -1; /* Register holding ROWID value */ isUpdate = regOldData!=0; db = pParse->db; @@ -108676,8 +109256,9 @@ case OE_Fail: { char *zMsg = sqlite3MPrintf(db, "%s.%s", pTab->zName, pTab->aCol[i].zName); - sqlite3VdbeAddOp4(v, OP_HaltIfNull, SQLITE_CONSTRAINT_NOTNULL, onError, - regNewData+1+i, zMsg, P4_DYNAMIC); + sqlite3VdbeAddOp3(v, OP_HaltIfNull, SQLITE_CONSTRAINT_NOTNULL, onError, + regNewData+1+i); + sqlite3VdbeAppendP4(v, zMsg, P4_DYNAMIC); sqlite3VdbeChangeP5(v, P5_ConstraintNotNull); VdbeCoverage(v); break; @@ -108741,7 +109322,7 @@ } if( isUpdate ){ - /* pkChng!=0 does not mean that the rowid has change, only that + /* pkChng!=0 does not mean that the rowid has changed, only that ** it might have changed. Skip the conflict logic below if the rowid ** is unchanged. */ sqlite3VdbeAddOp3(v, OP_Eq, regNewData, addrRowidOk, regOldData); @@ -108819,7 +109400,7 @@ ** OP_Insert replace the existing entry than it is to delete the ** existing entry and then insert a new one. */ sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, OPFLAG_ISNOOP); - sqlite3VdbeChangeP4(v, -1, (char *)pTab, P4_TABLE); + sqlite3VdbeAppendP4(v, pTab, P4_TABLE); } #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ if( pTab->pIndex ){ @@ -108876,7 +109457,7 @@ /* Create a record for this index entry as it should appear after ** the insert or update. Store that record in the aRegIdx[ix] register */ - regIdx = sqlite3GetTempRange(pParse, pIdx->nColumn); + regIdx = aRegIdx[ix]+1; for(i=0; inColumn; i++){ int iField = pIdx->aiColumn[i]; int x; @@ -108887,9 +109468,7 @@ VdbeComment((v, "%s column %d", pIdx->zName, i)); }else{ if( iField==XN_ROWID || iField==pTab->iPKey ){ - if( regRowid==regIdx+i ) continue; /* ROWID already in regIdx+i */ x = regNewData; - regRowid = pIdx->pPartIdxWhere ? -1 : regIdx+i; }else{ x = iField + regNewData + 1; } @@ -108899,7 +109478,6 @@ } sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn, aRegIdx[ix]); VdbeComment((v, "for %s", pIdx->zName)); - sqlite3ExprCacheAffinityChange(pParse, regIdx, pIdx->nColumn); /* In an UPDATE operation, if this index is the PRIMARY KEY index ** of a WITHOUT ROWID table and there has been no change the @@ -108913,7 +109491,6 @@ /* Find out what action to take in case there is a uniqueness conflict */ onError = pIdx->onError; if( onError==OE_None ){ - sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn); sqlite3VdbeResolveLabel(v, addrUniqueOk); continue; /* pIdx is not a UNIQUE index */ } @@ -108922,6 +109499,12 @@ }else if( onError==OE_Default ){ onError = OE_Abort; } + + if( ix==0 && pPk==pIdx && onError==OE_Replace && pPk->pNext==0 ){ + sqlite3VdbeResolveLabel(v, addrUniqueOk); + continue; + } + /* Check to see if the new index entry will be unique */ sqlite3VdbeAddOp4Int(v, OP_NoConflict, iThisCur, addrUniqueOk, @@ -109012,7 +109595,6 @@ } } sqlite3VdbeResolveLabel(v, addrUniqueOk); - sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn); if( regR!=regIdx ) sqlite3ReleaseTempRange(pParse, regR, nPkField); } if( ipkTop ){ @@ -109062,7 +109644,9 @@ sqlite3VdbeAddOp2(v, OP_IsNull, aRegIdx[i], sqlite3VdbeCurrentAddr(v)+2); VdbeCoverage(v); } - sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i]); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i], + aRegIdx[i]+1, + pIdx->uniqNotNull ? pIdx->nKeyCol: pIdx->nColumn); pik_flags = 0; if( useSeekResult ) pik_flags = OPFLAG_USESEEKRESULT; if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){ @@ -109075,8 +109659,10 @@ regData = regNewData + 1; regRec = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp3(v, OP_MakeRecord, regData, pTab->nCol, regRec); - if( !bAffinityDone ) sqlite3TableAffinity(v, pTab, 0); - sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol); + if( !bAffinityDone ){ + sqlite3TableAffinity(v, pTab, 0); + sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol); + } if( pParse->nested ){ pik_flags = 0; }else{ @@ -109091,7 +109677,7 @@ } sqlite3VdbeAddOp3(v, OP_Insert, iDataCur, regRec, regNewData); if( !pParse->nested ){ - sqlite3VdbeChangeP4(v, -1, (char *)pTab, P4_TABLE); + sqlite3VdbeAppendP4(v, pTab, P4_TABLE); } sqlite3VdbeChangeP5(v, pik_flags); } @@ -109474,6 +110060,7 @@ sqlite3VdbeJumpHere(v, addr1); } if( HasRowid(pSrc) ){ + u8 insFlags; sqlite3OpenTable(pParse, iSrc, iDbSrc, pSrc, OP_OpenRead); emptySrcTest = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); if( pDest->iPKey>=0 ){ @@ -109490,9 +110077,16 @@ assert( (pDest->tabFlags & TF_Autoincrement)==0 ); } sqlite3VdbeAddOp2(v, OP_RowData, iSrc, regData); + if( db->flags & SQLITE_Vacuum ){ + sqlite3VdbeAddOp3(v, OP_Last, iDest, 0, -1); + insFlags = OPFLAG_NCHANGE|OPFLAG_LASTROWID| + OPFLAG_APPEND|OPFLAG_USESEEKRESULT; + }else{ + insFlags = OPFLAG_NCHANGE|OPFLAG_LASTROWID|OPFLAG_APPEND; + } sqlite3VdbeAddOp4(v, OP_Insert, iDest, regData, regRowid, (char*)pDest, P4_TABLE); - sqlite3VdbeChangeP5(v, OPFLAG_NCHANGE|OPFLAG_LASTROWID|OPFLAG_APPEND); + sqlite3VdbeChangeP5(v, insFlags); sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1); VdbeCoverage(v); sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0); sqlite3VdbeAddOp2(v, OP_Close, iDest, 0); @@ -109514,7 +110108,7 @@ sqlite3VdbeChangeP5(v, OPFLAG_BULKCSR); VdbeComment((v, "%s", pDestIdx->zName)); addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_RowKey, iSrc, regData); + sqlite3VdbeAddOp2(v, OP_RowData, iSrc, regData); if( db->flags & SQLITE_Vacuum ){ /* This INSERT command is part of a VACUUM operation, which guarantees ** that the destination table is empty. If all indexed columns use @@ -109544,8 +110138,8 @@ if( !HasRowid(pSrc) && pDestIdx->idxType==2 ){ idxInsFlags |= OPFLAG_NCHANGE; } - sqlite3VdbeAddOp3(v, OP_IdxInsert, iDest, regData, 1); - sqlite3VdbeChangeP5(v, idxInsFlags); + sqlite3VdbeAddOp2(v, OP_IdxInsert, iDest, regData); + sqlite3VdbeChangeP5(v, idxInsFlags|OPFLAG_APPEND); sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1+1); VdbeCoverage(v); sqlite3VdbeJumpHere(v, addr1); sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0); @@ -111108,6 +111702,8 @@ ** ../tool/mkpragmatab.tcl. To update the set of pragmas, edit ** that script and rerun it. */ + +/* The various pragma types */ #define PragTyp_HEADER_VALUE 0 #define PragTyp_AUTO_VACUUM 1 #define PragTyp_FLAG 2 @@ -111151,419 +111747,559 @@ #define PragTyp_REKEY 40 #define PragTyp_LOCK_STATUS 41 #define PragTyp_PARSER_TRACE 42 -#define PragFlag_NeedSchema 0x01 -#define PragFlag_ReadOnly 0x02 -static const struct sPragmaNames { - const char *const zName; /* Name of pragma */ - u8 ePragTyp; /* PragTyp_XXX value */ - u8 mPragFlag; /* Zero or more PragFlag_XXX values */ - u32 iArg; /* Extra argument */ -} aPragmaNames[] = { + +/* Property flags associated with various pragma. */ +#define PragFlg_NeedSchema 0x01 /* Force schema load before running */ +#define PragFlg_NoColumns 0x02 /* OP_ResultRow called with zero columns */ +#define PragFlg_ReadOnly 0x04 /* Read-only HEADER_VALUE */ +#define PragFlg_Result0 0x08 /* Acts as query when no argument */ +#define PragFlg_Result1 0x10 /* Acts as query when has one argument */ +#define PragFlg_SchemaOpt 0x20 /* Schema restricts name search if present */ +#define PragFlg_SchemaReq 0x40 /* Schema required - "main" is default */ + +/* Names of columns for pragmas that return multi-column result +** or that return single-column results where the name of the +** result column is different from the name of the pragma +*/ +static const char *const pragCName[] = { + /* 0 */ "cache_size", /* Used by: default_cache_size */ + /* 1 */ "cid", /* Used by: table_info */ + /* 2 */ "name", + /* 3 */ "type", + /* 4 */ "notnull", + /* 5 */ "dflt_value", + /* 6 */ "pk", + /* 7 */ "table", /* Used by: stats */ + /* 8 */ "index", + /* 9 */ "width", + /* 10 */ "height", + /* 11 */ "seqno", /* Used by: index_info */ + /* 12 */ "cid", + /* 13 */ "name", + /* 14 */ "seqno", /* Used by: index_xinfo */ + /* 15 */ "cid", + /* 16 */ "name", + /* 17 */ "desc", + /* 18 */ "coll", + /* 19 */ "key", + /* 20 */ "seq", /* Used by: index_list */ + /* 21 */ "name", + /* 22 */ "unique", + /* 23 */ "origin", + /* 24 */ "partial", + /* 25 */ "seq", /* Used by: database_list */ + /* 26 */ "name", + /* 27 */ "file", + /* 28 */ "seq", /* Used by: collation_list */ + /* 29 */ "name", + /* 30 */ "id", /* Used by: foreign_key_list */ + /* 31 */ "seq", + /* 32 */ "table", + /* 33 */ "from", + /* 34 */ "to", + /* 35 */ "on_update", + /* 36 */ "on_delete", + /* 37 */ "match", + /* 38 */ "table", /* Used by: foreign_key_check */ + /* 39 */ "rowid", + /* 40 */ "parent", + /* 41 */ "fkid", + /* 42 */ "busy", /* Used by: wal_checkpoint */ + /* 43 */ "log", + /* 44 */ "checkpointed", + /* 45 */ "timeout", /* Used by: busy_timeout */ + /* 46 */ "database", /* Used by: lock_status */ + /* 47 */ "status", +}; + +/* Definitions of all built-in pragmas */ +typedef struct PragmaName { + const char *const zName; /* Name of pragma */ + u8 ePragTyp; /* PragTyp_XXX value */ + u8 mPragFlg; /* Zero or more PragFlg_XXX values */ + u8 iPragCName; /* Start of column names in pragCName[] */ + u8 nPragCName; /* Num of col names. 0 means use pragma name */ + u32 iArg; /* Extra argument */ +} PragmaName; +static const PragmaName aPragmaName[] = { #if defined(SQLITE_HAS_CODEC) || defined(SQLITE_ENABLE_CEROD) - { /* zName: */ "activate_extensions", - /* ePragTyp: */ PragTyp_ACTIVATE_EXTENSIONS, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "activate_extensions", + /* ePragTyp: */ PragTyp_ACTIVATE_EXTENSIONS, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) - { /* zName: */ "application_id", - /* ePragTyp: */ PragTyp_HEADER_VALUE, - /* ePragFlag: */ 0, - /* iArg: */ BTREE_APPLICATION_ID }, + {/* zName: */ "application_id", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ BTREE_APPLICATION_ID }, #endif #if !defined(SQLITE_OMIT_AUTOVACUUM) - { /* zName: */ "auto_vacuum", - /* ePragTyp: */ PragTyp_AUTO_VACUUM, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "auto_vacuum", + /* ePragTyp: */ PragTyp_AUTO_VACUUM, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if !defined(SQLITE_OMIT_AUTOMATIC_INDEX) - { /* zName: */ "automatic_index", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_AutoIndex }, + {/* zName: */ "automatic_index", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_AutoIndex }, #endif #endif - { /* zName: */ "busy_timeout", - /* ePragTyp: */ PragTyp_BUSY_TIMEOUT, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "busy_timeout", + /* ePragTyp: */ PragTyp_BUSY_TIMEOUT, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 45, 1, + /* iArg: */ 0 }, #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) - { /* zName: */ "cache_size", - /* ePragTyp: */ PragTyp_CACHE_SIZE, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "cache_size", + /* ePragTyp: */ PragTyp_CACHE_SIZE, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "cache_spill", - /* ePragTyp: */ PragTyp_CACHE_SPILL, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "cache_spill", + /* ePragTyp: */ PragTyp_CACHE_SPILL, + /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif - { /* zName: */ "case_sensitive_like", - /* ePragTyp: */ PragTyp_CASE_SENSITIVE_LIKE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "cell_size_check", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_CellSizeCk }, + {/* zName: */ "case_sensitive_like", + /* ePragTyp: */ PragTyp_CASE_SENSITIVE_LIKE, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "cell_size_check", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_CellSizeCk }, #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "checkpoint_fullfsync", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_CkptFullFSync }, + {/* zName: */ "checkpoint_fullfsync", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_CkptFullFSync }, #endif #if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) - { /* zName: */ "collation_list", - /* ePragTyp: */ PragTyp_COLLATION_LIST, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "collation_list", + /* ePragTyp: */ PragTyp_COLLATION_LIST, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 28, 2, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_COMPILEOPTION_DIAGS) - { /* zName: */ "compile_options", - /* ePragTyp: */ PragTyp_COMPILE_OPTIONS, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "compile_options", + /* ePragTyp: */ PragTyp_COMPILE_OPTIONS, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "count_changes", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_CountRows }, + {/* zName: */ "count_changes", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_CountRows }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_OS_WIN - { /* zName: */ "data_store_directory", - /* ePragTyp: */ PragTyp_DATA_STORE_DIRECTORY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "data_store_directory", + /* ePragTyp: */ PragTyp_DATA_STORE_DIRECTORY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) - { /* zName: */ "data_version", - /* ePragTyp: */ PragTyp_HEADER_VALUE, - /* ePragFlag: */ PragFlag_ReadOnly, - /* iArg: */ BTREE_DATA_VERSION }, + {/* zName: */ "data_version", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlg: */ PragFlg_Result0|PragFlg_ReadOnly, + /* ColNames: */ 0, 0, + /* iArg: */ BTREE_DATA_VERSION }, #endif #if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) - { /* zName: */ "database_list", - /* ePragTyp: */ PragTyp_DATABASE_LIST, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "database_list", + /* ePragTyp: */ PragTyp_DATABASE_LIST, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0, + /* ColNames: */ 25, 3, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED) - { /* zName: */ "default_cache_size", - /* ePragTyp: */ PragTyp_DEFAULT_CACHE_SIZE, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "default_cache_size", + /* ePragTyp: */ PragTyp_DEFAULT_CACHE_SIZE, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 1, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - { /* zName: */ "defer_foreign_keys", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_DeferFKs }, + {/* zName: */ "defer_foreign_keys", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_DeferFKs }, #endif #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "empty_result_callbacks", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_NullCallback }, + {/* zName: */ "empty_result_callbacks", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_NullCallback }, #endif #if !defined(SQLITE_OMIT_UTF16) - { /* zName: */ "encoding", - /* ePragTyp: */ PragTyp_ENCODING, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "encoding", + /* ePragTyp: */ PragTyp_ENCODING, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - { /* zName: */ "foreign_key_check", - /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "foreign_key_check", + /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK, + /* ePragFlg: */ PragFlg_NeedSchema, + /* ColNames: */ 38, 4, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FOREIGN_KEY) - { /* zName: */ "foreign_key_list", - /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "foreign_key_list", + /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, + /* ColNames: */ 30, 8, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - { /* zName: */ "foreign_keys", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_ForeignKeys }, + {/* zName: */ "foreign_keys", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_ForeignKeys }, #endif #endif #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) - { /* zName: */ "freelist_count", - /* ePragTyp: */ PragTyp_HEADER_VALUE, - /* ePragFlag: */ PragFlag_ReadOnly, - /* iArg: */ BTREE_FREE_PAGE_COUNT }, + {/* zName: */ "freelist_count", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlg: */ PragFlg_Result0|PragFlg_ReadOnly, + /* ColNames: */ 0, 0, + /* iArg: */ BTREE_FREE_PAGE_COUNT }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "full_column_names", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_FullColNames }, - { /* zName: */ "fullfsync", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_FullFSync }, + {/* zName: */ "full_column_names", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_FullColNames }, + {/* zName: */ "fullfsync", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_FullFSync }, #endif #if defined(SQLITE_HAS_CODEC) - { /* zName: */ "hexkey", - /* ePragTyp: */ PragTyp_HEXKEY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "hexrekey", - /* ePragTyp: */ PragTyp_HEXKEY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "hexkey", + /* ePragTyp: */ PragTyp_HEXKEY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "hexrekey", + /* ePragTyp: */ PragTyp_HEXKEY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if !defined(SQLITE_OMIT_CHECK) - { /* zName: */ "ignore_check_constraints", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_IgnoreChecks }, + {/* zName: */ "ignore_check_constraints", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_IgnoreChecks }, #endif #endif #if !defined(SQLITE_OMIT_AUTOVACUUM) - { /* zName: */ "incremental_vacuum", - /* ePragTyp: */ PragTyp_INCREMENTAL_VACUUM, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "incremental_vacuum", + /* ePragTyp: */ PragTyp_INCREMENTAL_VACUUM, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) - { /* zName: */ "index_info", - /* ePragTyp: */ PragTyp_INDEX_INFO, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, - { /* zName: */ "index_list", - /* ePragTyp: */ PragTyp_INDEX_LIST, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, - { /* zName: */ "index_xinfo", - /* ePragTyp: */ PragTyp_INDEX_INFO, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 1 }, + {/* zName: */ "index_info", + /* ePragTyp: */ PragTyp_INDEX_INFO, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, + /* ColNames: */ 11, 3, + /* iArg: */ 0 }, + {/* zName: */ "index_list", + /* ePragTyp: */ PragTyp_INDEX_LIST, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, + /* ColNames: */ 20, 5, + /* iArg: */ 0 }, + {/* zName: */ "index_xinfo", + /* ePragTyp: */ PragTyp_INDEX_INFO, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, + /* ColNames: */ 14, 6, + /* iArg: */ 1 }, #endif #if !defined(SQLITE_OMIT_INTEGRITY_CHECK) - { /* zName: */ "integrity_check", - /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "integrity_check", + /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, + /* ePragFlg: */ PragFlg_NeedSchema, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) - { /* zName: */ "journal_mode", - /* ePragTyp: */ PragTyp_JOURNAL_MODE, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, - { /* zName: */ "journal_size_limit", - /* ePragTyp: */ PragTyp_JOURNAL_SIZE_LIMIT, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "journal_mode", + /* ePragTyp: */ PragTyp_JOURNAL_MODE, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "journal_size_limit", + /* ePragTyp: */ PragTyp_JOURNAL_SIZE_LIMIT, + /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if defined(SQLITE_HAS_CODEC) - { /* zName: */ "key", - /* ePragTyp: */ PragTyp_KEY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "key", + /* ePragTyp: */ PragTyp_KEY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "legacy_file_format", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_LegacyFileFmt }, + {/* zName: */ "legacy_file_format", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_LegacyFileFmt }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_ENABLE_LOCKING_STYLE - { /* zName: */ "lock_proxy_file", - /* ePragTyp: */ PragTyp_LOCK_PROXY_FILE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "lock_proxy_file", + /* ePragTyp: */ PragTyp_LOCK_PROXY_FILE, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) - { /* zName: */ "lock_status", - /* ePragTyp: */ PragTyp_LOCK_STATUS, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "lock_status", + /* ePragTyp: */ PragTyp_LOCK_STATUS, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 46, 2, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) - { /* zName: */ "locking_mode", - /* ePragTyp: */ PragTyp_LOCKING_MODE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "max_page_count", - /* ePragTyp: */ PragTyp_PAGE_COUNT, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, - { /* zName: */ "mmap_size", - /* ePragTyp: */ PragTyp_MMAP_SIZE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "page_count", - /* ePragTyp: */ PragTyp_PAGE_COUNT, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, - { /* zName: */ "page_size", - /* ePragTyp: */ PragTyp_PAGE_SIZE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "locking_mode", + /* ePragTyp: */ PragTyp_LOCKING_MODE, + /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "max_page_count", + /* ePragTyp: */ PragTyp_PAGE_COUNT, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "mmap_size", + /* ePragTyp: */ PragTyp_MMAP_SIZE, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "page_count", + /* ePragTyp: */ PragTyp_PAGE_COUNT, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "page_size", + /* ePragTyp: */ PragTyp_PAGE_SIZE, + /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if defined(SQLITE_DEBUG) && !defined(SQLITE_OMIT_PARSER_TRACE) - { /* zName: */ "parser_trace", - /* ePragTyp: */ PragTyp_PARSER_TRACE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "parser_trace", + /* ePragTyp: */ PragTyp_PARSER_TRACE, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "query_only", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_QueryOnly }, + {/* zName: */ "query_only", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_QueryOnly }, #endif #if !defined(SQLITE_OMIT_INTEGRITY_CHECK) - { /* zName: */ "quick_check", - /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "quick_check", + /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, + /* ePragFlg: */ PragFlg_NeedSchema, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "read_uncommitted", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_ReadUncommitted }, - { /* zName: */ "recursive_triggers", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_RecTriggers }, + {/* zName: */ "read_uncommitted", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_ReadUncommitted }, + {/* zName: */ "recursive_triggers", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_RecTriggers }, #endif #if defined(SQLITE_HAS_CODEC) - { /* zName: */ "rekey", - /* ePragTyp: */ PragTyp_REKEY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "rekey", + /* ePragTyp: */ PragTyp_REKEY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "reverse_unordered_selects", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_ReverseOrder }, + {/* zName: */ "reverse_unordered_selects", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_ReverseOrder }, #endif #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) - { /* zName: */ "schema_version", - /* ePragTyp: */ PragTyp_HEADER_VALUE, - /* ePragFlag: */ 0, - /* iArg: */ BTREE_SCHEMA_VERSION }, + {/* zName: */ "schema_version", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ BTREE_SCHEMA_VERSION }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) - { /* zName: */ "secure_delete", - /* ePragTyp: */ PragTyp_SECURE_DELETE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "secure_delete", + /* ePragTyp: */ PragTyp_SECURE_DELETE, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "short_column_names", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_ShortColNames }, + {/* zName: */ "short_column_names", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_ShortColNames }, #endif - { /* zName: */ "shrink_memory", - /* ePragTyp: */ PragTyp_SHRINK_MEMORY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "soft_heap_limit", - /* ePragTyp: */ PragTyp_SOFT_HEAP_LIMIT, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "shrink_memory", + /* ePragTyp: */ PragTyp_SHRINK_MEMORY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "soft_heap_limit", + /* ePragTyp: */ PragTyp_SOFT_HEAP_LIMIT, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if defined(SQLITE_DEBUG) - { /* zName: */ "sql_trace", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_SqlTrace }, + {/* zName: */ "sql_trace", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_SqlTrace }, #endif #endif #if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) - { /* zName: */ "stats", - /* ePragTyp: */ PragTyp_STATS, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "stats", + /* ePragTyp: */ PragTyp_STATS, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 7, 4, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) - { /* zName: */ "synchronous", - /* ePragTyp: */ PragTyp_SYNCHRONOUS, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "synchronous", + /* ePragTyp: */ PragTyp_SYNCHRONOUS, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) - { /* zName: */ "table_info", - /* ePragTyp: */ PragTyp_TABLE_INFO, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "table_info", + /* ePragTyp: */ PragTyp_TABLE_INFO, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, + /* ColNames: */ 1, 6, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) - { /* zName: */ "temp_store", - /* ePragTyp: */ PragTyp_TEMP_STORE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "temp_store_directory", - /* ePragTyp: */ PragTyp_TEMP_STORE_DIRECTORY, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "temp_store", + /* ePragTyp: */ PragTyp_TEMP_STORE, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "temp_store_directory", + /* ePragTyp: */ PragTyp_TEMP_STORE_DIRECTORY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #endif - { /* zName: */ "threads", - /* ePragTyp: */ PragTyp_THREADS, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + {/* zName: */ "threads", + /* ePragTyp: */ PragTyp_THREADS, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) - { /* zName: */ "user_version", - /* ePragTyp: */ PragTyp_HEADER_VALUE, - /* ePragFlag: */ 0, - /* iArg: */ BTREE_USER_VERSION }, + {/* zName: */ "user_version", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 0, 0, + /* iArg: */ BTREE_USER_VERSION }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if defined(SQLITE_DEBUG) - { /* zName: */ "vdbe_addoptrace", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_VdbeAddopTrace }, - { /* zName: */ "vdbe_debug", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_SqlTrace|SQLITE_VdbeListing|SQLITE_VdbeTrace }, - { /* zName: */ "vdbe_eqp", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_VdbeEQP }, - { /* zName: */ "vdbe_listing", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_VdbeListing }, - { /* zName: */ "vdbe_trace", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_VdbeTrace }, + {/* zName: */ "vdbe_addoptrace", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_VdbeAddopTrace }, + {/* zName: */ "vdbe_debug", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_SqlTrace|SQLITE_VdbeListing|SQLITE_VdbeTrace }, + {/* zName: */ "vdbe_eqp", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_VdbeEQP }, + {/* zName: */ "vdbe_listing", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_VdbeListing }, + {/* zName: */ "vdbe_trace", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_VdbeTrace }, #endif #endif #if !defined(SQLITE_OMIT_WAL) - { /* zName: */ "wal_autocheckpoint", - /* ePragTyp: */ PragTyp_WAL_AUTOCHECKPOINT, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, - { /* zName: */ "wal_checkpoint", - /* ePragTyp: */ PragTyp_WAL_CHECKPOINT, - /* ePragFlag: */ PragFlag_NeedSchema, - /* iArg: */ 0 }, + {/* zName: */ "wal_autocheckpoint", + /* ePragTyp: */ PragTyp_WAL_AUTOCHECKPOINT, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, + {/* zName: */ "wal_checkpoint", + /* ePragTyp: */ PragTyp_WAL_CHECKPOINT, + /* ePragFlg: */ PragFlg_NeedSchema, + /* ColNames: */ 42, 3, + /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) - { /* zName: */ "writable_schema", - /* ePragTyp: */ PragTyp_FLAG, - /* ePragFlag: */ 0, - /* iArg: */ SQLITE_WriteSchema|SQLITE_RecoveryMode }, + {/* zName: */ "writable_schema", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_WriteSchema|SQLITE_RecoveryMode }, #endif }; /* Number of pragmas: 60 on by default, 73 total. */ @@ -111704,29 +112440,29 @@ #endif /* SQLITE_PAGER_PRAGMAS */ /* -** Set the names of the first N columns to the values in azCol[] +** Set result column names for a pragma. */ -static void setAllColumnNames( - Vdbe *v, /* The query under construction */ - int N, /* Number of columns */ - const char **azCol /* Names of columns */ +static void setPragmaResultColumnNames( + Vdbe *v, /* The query under construction */ + const PragmaName *pPragma /* The pragma */ ){ - int i; - sqlite3VdbeSetNumCols(v, N); - for(i=0; inPragCName; + sqlite3VdbeSetNumCols(v, n==0 ? 1 : n); + if( n==0 ){ + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, pPragma->zName, SQLITE_STATIC); + }else{ + int i, j; + for(i=0, j=pPragma->iPragCName; iupr ? 0 : &aPragmaName[mid]; +} + +/* ** Process a pragma statement. ** ** Pragmas are of this form: @@ -111846,12 +112600,11 @@ Token *pId; /* Pointer to token */ char *aFcntl[4]; /* Argument to SQLITE_FCNTL_PRAGMA */ int iDb; /* Database index for */ - int lwr, upr, mid = 0; /* Binary search bounds */ int rc; /* return value form SQLITE_FCNTL_PRAGMA */ sqlite3 *db = pParse->db; /* The database connection */ Db *pDb; /* The specific database being pragmaed */ Vdbe *v = sqlite3GetVdbe(pParse); /* Prepared statement */ - const struct sPragmaNames *pPragma; + const PragmaName *pPragma; /* The pragma */ if( v==0 ) return; sqlite3VdbeRunOnlyOnce(v); @@ -111906,7 +112659,9 @@ db->busyHandler.nBusy = 0; rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_PRAGMA, (void*)aFcntl); if( rc==SQLITE_OK ){ - returnSingleText(v, "result", aFcntl[0]); + sqlite3VdbeSetNumCols(v, 1); + sqlite3VdbeSetColName(v, 0, COLNAME_NAME, aFcntl[0], SQLITE_TRANSIENT); + returnSingleText(v, aFcntl[0]); sqlite3_free(aFcntl[0]); goto pragma_out; } @@ -111921,26 +112676,19 @@ } /* Locate the pragma in the lookup table */ - lwr = 0; - upr = ArraySize(aPragmaNames)-1; - while( lwr<=upr ){ - mid = (lwr+upr)/2; - rc = sqlite3_stricmp(zLeft, aPragmaNames[mid].zName); - if( rc==0 ) break; - if( rc<0 ){ - upr = mid - 1; - }else{ - lwr = mid + 1; - } - } - if( lwr>upr ) goto pragma_out; - pPragma = &aPragmaNames[mid]; + pPragma = pragmaLocate(zLeft); + if( pPragma==0 ) goto pragma_out; /* Make sure the database schema is loaded if the pragma requires that */ - if( (pPragma->mPragFlag & PragFlag_NeedSchema)!=0 ){ + if( (pPragma->mPragFlg & PragFlg_NeedSchema)!=0 ){ if( sqlite3ReadSchema(pParse) ) goto pragma_out; } + /* Register the result column names for pragmas that return results */ + if( (pPragma->mPragFlg & PragFlg_NoColumns)==0 ){ + setPragmaResultColumnNames(v, pPragma); + } + /* Jump to the appropriate pragma handler */ switch( pPragma->ePragTyp ){ @@ -111977,7 +112725,6 @@ VdbeOp *aOp; sqlite3VdbeUsesBtree(v, iDb); if( !zRight ){ - setOneColumnName(v, "cache_size"); pParse->nMem += 2; sqlite3VdbeVerifyNoMallocRequired(v, ArraySize(getCacheSize)); aOp = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize, iLn); @@ -112012,7 +112759,7 @@ assert( pBt!=0 ); if( !zRight ){ int size = ALWAYS(pBt) ? sqlite3BtreeGetPageSize(pBt) : 0; - returnSingleInt(v, "page_size", size); + returnSingleInt(v, size); }else{ /* Malloc may fail when setting the page-size, as there is an internal ** buffer that the pager module resizes using sqlite3_realloc(). @@ -112047,7 +112794,7 @@ } } b = sqlite3BtreeSecureDelete(pBt, b); - returnSingleInt(v, "secure_delete", b); + returnSingleInt(v, b); break; } @@ -112079,8 +112826,6 @@ sqlite3AbsInt32(sqlite3Atoi(zRight))); } sqlite3VdbeAddOp2(v, OP_ResultRow, iReg, 1); - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT); break; } @@ -112126,7 +112871,7 @@ if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){ zRet = "exclusive"; } - returnSingleText(v, "locking_mode", zRet); + returnSingleText(v, zRet); break; } @@ -112139,7 +112884,6 @@ int eMode; /* One of the PAGER_JOURNALMODE_XXX symbols */ int ii; /* Loop counter */ - setOneColumnName(v, "journal_mode"); if( zRight==0 ){ /* If there is no "=MODE" part of the pragma, do a query for the ** current mode */ @@ -112185,7 +112929,7 @@ if( iLimit<-1 ) iLimit = -1; } iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit); - returnSingleInt(v, "journal_size_limit", iLimit); + returnSingleInt(v, iLimit); break; } @@ -112203,7 +112947,7 @@ Btree *pBt = pDb->pBt; assert( pBt!=0 ); if( !zRight ){ - returnSingleInt(v, "auto_vacuum", sqlite3BtreeGetAutoVacuum(pBt)); + returnSingleInt(v, sqlite3BtreeGetAutoVacuum(pBt)); }else{ int eAuto = getAutoVacuum(zRight); assert( eAuto>=0 && eAuto<=2 ); @@ -112282,7 +113026,7 @@ case PragTyp_CACHE_SIZE: { assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); if( !zRight ){ - returnSingleInt(v, "cache_size", pDb->pSchema->cache_size); + returnSingleInt(v, pDb->pSchema->cache_size); }else{ int size = sqlite3Atoi(zRight); pDb->pSchema->cache_size = size; @@ -112316,7 +113060,7 @@ case PragTyp_CACHE_SPILL: { assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); if( !zRight ){ - returnSingleInt(v, "cache_spill", + returnSingleInt(v, (db->flags & SQLITE_CacheSpill)==0 ? 0 : sqlite3BtreeSetSpillSize(pDb->pBt,0)); }else{ @@ -112370,7 +113114,7 @@ rc = SQLITE_OK; #endif if( rc==SQLITE_OK ){ - returnSingleInt(v, "mmap_size", sz); + returnSingleInt(v, sz); }else if( rc!=SQLITE_NOTFOUND ){ pParse->nErr++; pParse->rc = rc; @@ -112391,7 +113135,7 @@ */ case PragTyp_TEMP_STORE: { if( !zRight ){ - returnSingleInt(v, "temp_store", db->temp_store); + returnSingleInt(v, db->temp_store); }else{ changeTempStorage(pParse, zRight); } @@ -112410,7 +113154,7 @@ */ case PragTyp_TEMP_STORE_DIRECTORY: { if( !zRight ){ - returnSingleText(v, "temp_store_directory", sqlite3_temp_directory); + returnSingleText(v, sqlite3_temp_directory); }else{ #ifndef SQLITE_OMIT_WSD if( zRight[0] ){ @@ -112454,7 +113198,7 @@ */ case PragTyp_DATA_STORE_DIRECTORY: { if( !zRight ){ - returnSingleText(v, "data_store_directory", sqlite3_data_directory); + returnSingleText(v, sqlite3_data_directory); }else{ #ifndef SQLITE_OMIT_WSD if( zRight[0] ){ @@ -112493,7 +113237,7 @@ sqlite3_file *pFile = sqlite3PagerFile(pPager); sqlite3OsFileControlHint(pFile, SQLITE_GET_LOCKPROXYFILE, &proxy_file_path); - returnSingleText(v, "lock_proxy_file", proxy_file_path); + returnSingleText(v, proxy_file_path); }else{ Pager *pPager = sqlite3BtreePager(pDb->pBt); sqlite3_file *pFile = sqlite3PagerFile(pPager); @@ -112525,7 +113269,7 @@ */ case PragTyp_SYNCHRONOUS: { if( !zRight ){ - returnSingleInt(v, "synchronous", pDb->safety_level-1); + returnSingleInt(v, pDb->safety_level-1); }else{ if( !db->autoCommit ){ sqlite3ErrorMsg(pParse, @@ -112545,7 +113289,8 @@ #ifndef SQLITE_OMIT_FLAG_PRAGMAS case PragTyp_FLAG: { if( zRight==0 ){ - returnSingleInt(v, pPragma->zName, (db->flags & pPragma->iArg)!=0 ); + setPragmaResultColumnNames(v, pPragma); + returnSingleInt(v, (db->flags & pPragma->iArg)!=0 ); }else{ int mask = pPragma->iArg; /* Mask of bits to set or clear. */ if( db->autoCommit==0 ){ @@ -112595,16 +113340,12 @@ Table *pTab; pTab = sqlite3LocateTable(pParse, LOCATE_NOERR, zRight, zDb); if( pTab ){ - static const char *azCol[] = { - "cid", "name", "type", "notnull", "dflt_value", "pk" - }; int i, k; int nHidden = 0; Column *pCol; Index *pPk = sqlite3PrimaryKeyIndex(pTab); pParse->nMem = 6; sqlite3CodeVerifySchema(pParse, iDb); - setAllColumnNames(v, 6, azCol); assert( 6==ArraySize(azCol) ); sqlite3ViewGetColumnNames(pParse, pTab); for(i=0, pCol=pTab->aCol; inCol; i++, pCol++){ if( IsHiddenColumn(pCol) ){ @@ -112633,13 +113374,10 @@ break; case PragTyp_STATS: { - static const char *azCol[] = { "table", "index", "width", "height" }; Index *pIdx; HashElem *i; - v = sqlite3GetVdbe(pParse); pParse->nMem = 4; sqlite3CodeVerifySchema(pParse, iDb); - setAllColumnNames(v, 4, azCol); assert( 4==ArraySize(azCol) ); for(i=sqliteHashFirst(&pDb->pSchema->tblHash); i; i=sqliteHashNext(i)){ Table *pTab = sqliteHashData(i); sqlite3VdbeMultiLoad(v, 1, "ssii", @@ -112664,9 +113402,6 @@ Table *pTab; pIdx = sqlite3FindIndex(db, zRight, zDb); if( pIdx ){ - static const char *azCol[] = { - "seqno", "cid", "name", "desc", "coll", "key" - }; int i; int mx; if( pPragma->iArg ){ @@ -112680,8 +113415,7 @@ } pTab = pIdx->pTable; sqlite3CodeVerifySchema(pParse, iDb); - assert( pParse->nMem<=ArraySize(azCol) ); - setAllColumnNames(v, pParse->nMem, azCol); + assert( pParse->nMem<=pPragma->nPragCName ); for(i=0; iaiColumn[i]; sqlite3VdbeMultiLoad(v, 1, "iis", i, cnum, @@ -112704,13 +113438,8 @@ int i; pTab = sqlite3FindTable(db, zRight, zDb); if( pTab ){ - static const char *azCol[] = { - "seq", "name", "unique", "origin", "partial" - }; - v = sqlite3GetVdbe(pParse); pParse->nMem = 5; sqlite3CodeVerifySchema(pParse, iDb); - setAllColumnNames(v, 5, azCol); assert( 5==ArraySize(azCol) ); for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){ const char *azOrigin[] = { "c", "u", "pk" }; sqlite3VdbeMultiLoad(v, 1, "isisi", @@ -112726,10 +113455,8 @@ break; case PragTyp_DATABASE_LIST: { - static const char *azCol[] = { "seq", "name", "file" }; int i; pParse->nMem = 3; - setAllColumnNames(v, 3, azCol); assert( 3==ArraySize(azCol) ); for(i=0; inDb; i++){ if( db->aDb[i].pBt==0 ) continue; assert( db->aDb[i].zDbSName!=0 ); @@ -112743,11 +113470,9 @@ break; case PragTyp_COLLATION_LIST: { - static const char *azCol[] = { "seq", "name" }; int i = 0; HashElem *p; pParse->nMem = 2; - setAllColumnNames(v, 2, azCol); assert( 2==ArraySize(azCol) ); for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){ CollSeq *pColl = (CollSeq *)sqliteHashData(p); sqlite3VdbeMultiLoad(v, 1, "is", i++, pColl->zName); @@ -112763,17 +113488,11 @@ Table *pTab; pTab = sqlite3FindTable(db, zRight, zDb); if( pTab ){ - v = sqlite3GetVdbe(pParse); pFK = pTab->pFKey; if( pFK ){ - static const char *azCol[] = { - "id", "seq", "table", "from", "to", "on_update", "on_delete", - "match" - }; int i = 0; pParse->nMem = 8; sqlite3CodeVerifySchema(pParse, iDb); - setAllColumnNames(v, 8, azCol); assert( 8==ArraySize(azCol) ); while(pFK){ int j; for(j=0; jnCol; j++){ @@ -112814,14 +113533,11 @@ int addrTop; /* Top of a loop checking foreign keys */ int addrOk; /* Jump here if the key is OK */ int *aiCols; /* child to parent column mapping */ - static const char *azCol[] = { "table", "rowid", "parent", "fkid" }; regResult = pParse->nMem+1; pParse->nMem += 4; regKey = ++pParse->nMem; regRow = ++pParse->nMem; - v = sqlite3GetVdbe(pParse); - setAllColumnNames(v, 4, azCol); assert( 4==ArraySize(azCol) ); sqlite3CodeVerifySchema(pParse, iDb); k = sqliteHashFirst(&db->aDb[iDb].pSchema->tblHash); while( k ){ @@ -112960,7 +113676,6 @@ /* Initialize the VDBE program */ pParse->nMem = 6; - setOneColumnName(v, "integrity_check"); /* Set the maximum error count */ mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX; @@ -113212,7 +113927,7 @@ assert( encnames[SQLITE_UTF8].enc==SQLITE_UTF8 ); assert( encnames[SQLITE_UTF16LE].enc==SQLITE_UTF16LE ); assert( encnames[SQLITE_UTF16BE].enc==SQLITE_UTF16BE ); - returnSingleText(v, "encoding", encnames[ENC(pParse->db)].zName); + returnSingleText(v, encnames[ENC(pParse->db)].zName); }else{ /* "PRAGMA encoding = XXX" */ /* Only change the value of sqlite.enc if the database handle is not ** initialized. If the main database exists, the new sqlite.enc value @@ -113275,7 +113990,7 @@ case PragTyp_HEADER_VALUE: { int iCookie = pPragma->iArg; /* Which cookie to read or write */ sqlite3VdbeUsesBtree(v, iDb); - if( zRight && (pPragma->mPragFlag & PragFlag_ReadOnly)==0 ){ + if( zRight && (pPragma->mPragFlg & PragFlg_ReadOnly)==0 ){ /* Write the specified cookie value */ static const VdbeOpList setCookie[] = { { OP_Transaction, 0, 1, 0}, /* 0 */ @@ -113303,8 +114018,6 @@ aOp[0].p1 = iDb; aOp[1].p1 = iDb; aOp[1].p3 = iCookie; - sqlite3VdbeSetNumCols(v, 1); - sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT); sqlite3VdbeReusable(v); } } @@ -113322,7 +114035,6 @@ int i = 0; const char *zOpt; pParse->nMem = 1; - setOneColumnName(v, "compile_option"); while( (zOpt = sqlite3_compileoption_get(i++))!=0 ){ sqlite3VdbeLoadString(v, 1, zOpt); sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); @@ -113339,7 +114051,6 @@ ** Checkpoint the database. */ case PragTyp_WAL_CHECKPOINT: { - static const char *azCol[] = { "busy", "log", "checkpointed" }; int iBt = (pId2->z?iDb:SQLITE_MAX_ATTACHED); int eMode = SQLITE_CHECKPOINT_PASSIVE; if( zRight ){ @@ -113351,7 +114062,6 @@ eMode = SQLITE_CHECKPOINT_TRUNCATE; } } - setAllColumnNames(v, 3, azCol); assert( 3==ArraySize(azCol) ); pParse->nMem = 3; sqlite3VdbeAddOp3(v, OP_Checkpoint, iBt, eMode, 1); sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); @@ -113370,7 +114080,7 @@ if( zRight ){ sqlite3_wal_autocheckpoint(db, sqlite3Atoi(zRight)); } - returnSingleInt(v, "wal_autocheckpoint", + returnSingleInt(v, db->xWalCallback==sqlite3WalDefaultHook ? SQLITE_PTR_TO_INT(db->pWalArg) : 0); } @@ -113403,7 +114113,7 @@ if( zRight ){ sqlite3_busy_timeout(db, sqlite3Atoi(zRight)); } - returnSingleInt(v, "timeout", db->busyTimeout); + returnSingleInt(v, db->busyTimeout); break; } @@ -113423,7 +114133,7 @@ if( zRight && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK ){ sqlite3_soft_heap_limit64(N); } - returnSingleInt(v, "soft_heap_limit", sqlite3_soft_heap_limit64(-1)); + returnSingleInt(v, sqlite3_soft_heap_limit64(-1)); break; } @@ -113442,8 +114152,7 @@ ){ sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, (int)(N&0x7fffffff)); } - returnSingleInt(v, "threads", - sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, -1)); + returnSingleInt(v, sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, -1)); break; } @@ -113455,9 +114164,7 @@ static const char *const azLockName[] = { "unlocked", "shared", "reserved", "pending", "exclusive" }; - static const char *azCol[] = { "database", "status" }; int i; - setAllColumnNames(v, 2, azCol); assert( 2==ArraySize(azCol) ); pParse->nMem = 2; for(i=0; inDb; i++){ Btree *pBt; @@ -113527,7 +114234,313 @@ sqlite3DbFree(db, zLeft); sqlite3DbFree(db, zRight); } +#ifndef SQLITE_OMIT_VIRTUALTABLE +/***************************************************************************** +** Implementation of an eponymous virtual table that runs a pragma. +** +*/ +typedef struct PragmaVtab PragmaVtab; +typedef struct PragmaVtabCursor PragmaVtabCursor; +struct PragmaVtab { + sqlite3_vtab base; /* Base class. Must be first */ + sqlite3 *db; /* The database connection to which it belongs */ + const PragmaName *pName; /* Name of the pragma */ + u8 nHidden; /* Number of hidden columns */ + u8 iHidden; /* Index of the first hidden column */ +}; +struct PragmaVtabCursor { + sqlite3_vtab_cursor base; /* Base class. Must be first */ + sqlite3_stmt *pPragma; /* The pragma statement to run */ + sqlite_int64 iRowid; /* Current rowid */ + char *azArg[2]; /* Value of the argument and schema */ +}; +/* +** Pragma virtual table module xConnect method. +*/ +static int pragmaVtabConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + const PragmaName *pPragma = (const PragmaName*)pAux; + PragmaVtab *pTab = 0; + int rc; + int i, j; + char cSep = '('; + StrAccum acc; + char zBuf[200]; + + UNUSED_PARAMETER(argc); + UNUSED_PARAMETER(argv); + sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); + sqlite3StrAccumAppendAll(&acc, "CREATE TABLE x"); + for(i=0, j=pPragma->iPragCName; inPragCName; i++, j++){ + sqlite3XPrintf(&acc, "%c\"%s\"", cSep, pragCName[j]); + cSep = ','; + } + if( i==0 ){ + sqlite3XPrintf(&acc, "(\"%s\"", pPragma->zName); + cSep = ','; + i++; + } + j = 0; + if( pPragma->mPragFlg & PragFlg_Result1 ){ + sqlite3StrAccumAppendAll(&acc, ",arg HIDDEN"); + j++; + } + if( pPragma->mPragFlg & (PragFlg_SchemaOpt|PragFlg_SchemaReq) ){ + sqlite3StrAccumAppendAll(&acc, ",schema HIDDEN"); + j++; + } + sqlite3StrAccumAppend(&acc, ")", 1); + sqlite3StrAccumFinish(&acc); + assert( strlen(zBuf) < sizeof(zBuf)-1 ); + rc = sqlite3_declare_vtab(db, zBuf); + if( rc==SQLITE_OK ){ + pTab = (PragmaVtab*)sqlite3_malloc(sizeof(PragmaVtab)); + if( pTab==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pTab, 0, sizeof(PragmaVtab)); + pTab->pName = pPragma; + pTab->db = db; + pTab->iHidden = i; + pTab->nHidden = j; + } + }else{ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + } + + *ppVtab = (sqlite3_vtab*)pTab; + return rc; +} + +/* +** Pragma virtual table module xDisconnect method. +*/ +static int pragmaVtabDisconnect(sqlite3_vtab *pVtab){ + PragmaVtab *pTab = (PragmaVtab*)pVtab; + sqlite3_free(pTab); + return SQLITE_OK; +} + +/* Figure out the best index to use to search a pragma virtual table. +** +** There are not really any index choices. But we want to encourage the +** query planner to give == constraints on as many hidden parameters as +** possible, and especially on the first hidden parameter. So return a +** high cost if hidden parameters are unconstrained. +*/ +static int pragmaVtabBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ + PragmaVtab *pTab = (PragmaVtab*)tab; + const struct sqlite3_index_constraint *pConstraint; + int i, j; + int seen[2]; + + pIdxInfo->estimatedCost = (double)1; + if( pTab->nHidden==0 ){ return SQLITE_OK; } + pConstraint = pIdxInfo->aConstraint; + seen[0] = 0; + seen[1] = 0; + for(i=0; inConstraint; i++, pConstraint++){ + if( pConstraint->usable==0 ) continue; + if( pConstraint->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue; + if( pConstraint->iColumn < pTab->iHidden ) continue; + j = pConstraint->iColumn - pTab->iHidden; + assert( j < 2 ); + seen[j] = i+1; + } + if( seen[0]==0 ){ + pIdxInfo->estimatedCost = (double)2147483647; + pIdxInfo->estimatedRows = 2147483647; + return SQLITE_OK; + } + j = seen[0]-1; + pIdxInfo->aConstraintUsage[j].argvIndex = 1; + pIdxInfo->aConstraintUsage[j].omit = 1; + if( seen[1]==0 ) return SQLITE_OK; + pIdxInfo->estimatedCost = (double)20; + pIdxInfo->estimatedRows = 20; + j = seen[1]-1; + pIdxInfo->aConstraintUsage[j].argvIndex = 2; + pIdxInfo->aConstraintUsage[j].omit = 1; + return SQLITE_OK; +} + +/* Create a new cursor for the pragma virtual table */ +static int pragmaVtabOpen(sqlite3_vtab *pVtab, sqlite3_vtab_cursor **ppCursor){ + PragmaVtabCursor *pCsr; + pCsr = (PragmaVtabCursor*)sqlite3_malloc(sizeof(*pCsr)); + if( pCsr==0 ) return SQLITE_NOMEM; + memset(pCsr, 0, sizeof(PragmaVtabCursor)); + pCsr->base.pVtab = pVtab; + *ppCursor = &pCsr->base; + return SQLITE_OK; +} + +/* Clear all content from pragma virtual table cursor. */ +static void pragmaVtabCursorClear(PragmaVtabCursor *pCsr){ + int i; + sqlite3_finalize(pCsr->pPragma); + pCsr->pPragma = 0; + for(i=0; iazArg); i++){ + sqlite3_free(pCsr->azArg[i]); + pCsr->azArg[i] = 0; + } +} + +/* Close a pragma virtual table cursor */ +static int pragmaVtabClose(sqlite3_vtab_cursor *cur){ + PragmaVtabCursor *pCsr = (PragmaVtabCursor*)cur; + pragmaVtabCursorClear(pCsr); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* Advance the pragma virtual table cursor to the next row */ +static int pragmaVtabNext(sqlite3_vtab_cursor *pVtabCursor){ + PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor; + int rc = SQLITE_OK; + + /* Increment the xRowid value */ + pCsr->iRowid++; + assert( pCsr->pPragma ); + if( SQLITE_ROW!=sqlite3_step(pCsr->pPragma) ){ + rc = sqlite3_finalize(pCsr->pPragma); + pCsr->pPragma = 0; + pragmaVtabCursorClear(pCsr); + } + return rc; +} + +/* +** Pragma virtual table module xFilter method. +*/ +static int pragmaVtabFilter( + sqlite3_vtab_cursor *pVtabCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor; + PragmaVtab *pTab = (PragmaVtab*)(pVtabCursor->pVtab); + int rc; + int i, j; + StrAccum acc; + char *zSql; + + UNUSED_PARAMETER(idxNum); + UNUSED_PARAMETER(idxStr); + pragmaVtabCursorClear(pCsr); + j = (pTab->pName->mPragFlg & PragFlg_Result1)!=0 ? 0 : 1; + for(i=0; iazArg) ); + pCsr->azArg[j] = sqlite3_mprintf("%s", sqlite3_value_text(argv[i])); + if( pCsr->azArg[j]==0 ){ + return SQLITE_NOMEM; + } + } + sqlite3StrAccumInit(&acc, 0, 0, 0, pTab->db->aLimit[SQLITE_LIMIT_SQL_LENGTH]); + sqlite3StrAccumAppendAll(&acc, "PRAGMA "); + if( pCsr->azArg[1] ){ + sqlite3XPrintf(&acc, "%Q.", pCsr->azArg[1]); + } + sqlite3StrAccumAppendAll(&acc, pTab->pName->zName); + if( pCsr->azArg[0] ){ + sqlite3XPrintf(&acc, "=%Q", pCsr->azArg[0]); + } + zSql = sqlite3StrAccumFinish(&acc); + if( zSql==0 ) return SQLITE_NOMEM; + rc = sqlite3_prepare_v2(pTab->db, zSql, -1, &pCsr->pPragma, 0); + sqlite3_free(zSql); + if( rc!=SQLITE_OK ){ + pTab->base.zErrMsg = sqlite3_mprintf("%s", sqlite3_errmsg(pTab->db)); + return rc; + } + return pragmaVtabNext(pVtabCursor); +} + +/* +** Pragma virtual table module xEof method. +*/ +static int pragmaVtabEof(sqlite3_vtab_cursor *pVtabCursor){ + PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor; + return (pCsr->pPragma==0); +} + +/* The xColumn method simply returns the corresponding column from +** the PRAGMA. +*/ +static int pragmaVtabColumn( + sqlite3_vtab_cursor *pVtabCursor, + sqlite3_context *ctx, + int i +){ + PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor; + PragmaVtab *pTab = (PragmaVtab*)(pVtabCursor->pVtab); + if( iiHidden ){ + sqlite3_result_value(ctx, sqlite3_column_value(pCsr->pPragma, i)); + }else{ + sqlite3_result_text(ctx, pCsr->azArg[i-pTab->iHidden],-1,SQLITE_TRANSIENT); + } + return SQLITE_OK; +} + +/* +** Pragma virtual table module xRowid method. +*/ +static int pragmaVtabRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *p){ + PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor; + *p = pCsr->iRowid; + return SQLITE_OK; +} + +/* The pragma virtual table object */ +static const sqlite3_module pragmaVtabModule = { + 0, /* iVersion */ + 0, /* xCreate - create a table */ + pragmaVtabConnect, /* xConnect - connect to an existing table */ + pragmaVtabBestIndex, /* xBestIndex - Determine search strategy */ + pragmaVtabDisconnect, /* xDisconnect - Disconnect from a table */ + 0, /* xDestroy - Drop a table */ + pragmaVtabOpen, /* xOpen - open a cursor */ + pragmaVtabClose, /* xClose - close a cursor */ + pragmaVtabFilter, /* xFilter - configure scan constraints */ + pragmaVtabNext, /* xNext - advance a cursor */ + pragmaVtabEof, /* xEof */ + pragmaVtabColumn, /* xColumn - read data */ + pragmaVtabRowid, /* xRowid - read data */ + 0, /* xUpdate - write data */ + 0, /* xBegin - begin transaction */ + 0, /* xSync - sync transaction */ + 0, /* xCommit - commit transaction */ + 0, /* xRollback - rollback transaction */ + 0, /* xFindFunction - function overloading */ + 0, /* xRename - rename the table */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0 /* xRollbackTo */ +}; + +/* +** Check to see if zTabName is really the name of a pragma. If it is, +** then register an eponymous virtual table for that pragma and return +** a pointer to the Module object for the new virtual table. +*/ +SQLITE_PRIVATE Module *sqlite3PragmaVtabRegister(sqlite3 *db, const char *zName){ + const PragmaName *pName; + assert( sqlite3_strnicmp(zName, "pragma_", 7)==0 ); + pName = pragmaLocate(zName+7); + if( pName==0 ) return 0; + if( (pName->mPragFlg & (PragFlg_Result0|PragFlg_Result1))==0 ) return 0; + assert( sqlite3HashFind(&db->aModule, zName)==0 ); + return sqlite3VtabCreateModule(db, zName, &pragmaVtabModule, (void*)pName, 0); +} + +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + #endif /* SQLITE_OMIT_PRAGMA */ /************** End of pragma.c **********************************************/ @@ -114723,7 +115736,7 @@ pE1 = sqlite3CreateColumnExpr(db, pSrc, iLeft, iColLeft); pE2 = sqlite3CreateColumnExpr(db, pSrc, iRight, iColRight); - pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2, 0); + pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2); if( pEq && isOuterJoin ){ ExprSetProperty(pEq, EP_FromJoin); assert( !ExprHasProperty(pEq, EP_TokenOnly|EP_Reduced) ); @@ -114910,7 +115923,7 @@ int iLimit; /* LIMIT counter */ assert( bSeq==0 || bSeq==1 ); - assert( nData==1 || regData==regOrigData ); + assert( nData==1 || regData==regOrigData || regOrigData==0 ); if( nPrefixReg ){ assert( nPrefixReg==nExpr+bSeq ); regBase = regData - nExpr - bSeq; @@ -114922,11 +115935,11 @@ iLimit = pSelect->iOffset ? pSelect->iOffset+1 : pSelect->iLimit; pSort->labelDone = sqlite3VdbeMakeLabel(v); sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, regOrigData, - SQLITE_ECEL_DUP|SQLITE_ECEL_REF); + SQLITE_ECEL_DUP | (regOrigData? SQLITE_ECEL_REF : 0)); if( bSeq ){ sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr); } - if( nPrefixReg==0 ){ + if( nPrefixReg==0 && nData>0 ){ sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData); } sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord); @@ -114976,15 +115989,16 @@ }else{ op = OP_IdxInsert; } - sqlite3VdbeAddOp2(v, op, pSort->iECursor, regRecord); + sqlite3VdbeAddOp4Int(v, op, pSort->iECursor, regRecord, + regBase+nOBSat, nBase-nOBSat); if( iLimit ){ int addr; int r1 = 0; /* Fill the sorter until it contains LIMIT+OFFSET entries. (The iLimit ** register is initialized with value of LIMIT+OFFSET.) After the sorter ** fills up, delete the least entry in the sorter after each insert. ** Thus we never hold more than the LIMIT+OFFSET rows in memory at once */ - addr = sqlite3VdbeAddOp3(v, OP_IfNotZero, iLimit, 0, 1); VdbeCoverage(v); + addr = sqlite3VdbeAddOp1(v, OP_IfNotZero, iLimit); VdbeCoverage(v); sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor); if( pSort->bOrderedInnerLoop ){ r1 = ++pParse->nMem; @@ -115044,7 +116058,7 @@ r1 = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp4Int(v, OP_Found, iTab, addrRepeat, iMem, N); VdbeCoverage(v); sqlite3VdbeAddOp3(v, OP_MakeRecord, iMem, N, r1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iTab, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iTab, r1, iMem, N); sqlite3ReleaseTempReg(pParse, r1); } @@ -115055,7 +116069,7 @@ ** If srcTab is negative, then the pEList expressions ** are evaluated in order to get the data for this row. If srcTab is ** zero or more, then data is pulled from srcTab and pEList is used only -** to get number columns and the datatype for each column. +** to get the number of columns and the collation sequence for each column. */ static void selectInnerLoop( Parse *pParse, /* The parser context */ @@ -115070,13 +116084,20 @@ ){ Vdbe *v = pParse->pVdbe; int i; - int hasDistinct; /* True if the DISTINCT keyword is present */ - int regResult; /* Start of memory holding result set */ + int hasDistinct; /* True if the DISTINCT keyword is present */ int eDest = pDest->eDest; /* How to dispose of results */ int iParm = pDest->iSDParm; /* First argument to disposal method */ int nResultCol; /* Number of result columns */ int nPrefixReg = 0; /* Number of extra registers before regResult */ + /* Usually, regResult is the first cell in an array of memory cells + ** containing the current result row. In this case regOrig is set to the + ** same value. However, if the results are being sent to the sorter, the + ** values for any expressions that are also part of the sort-key are omitted + ** from this array. In this case regOrig is set to zero. */ + int regResult; /* Start of memory holding current results */ + int regOrig; /* Start of memory holding full result (or 0) */ + assert( v ); assert( pEList!=0 ); hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP; @@ -115107,7 +116128,7 @@ pParse->nMem += nResultCol; } pDest->nSdst = nResultCol; - regResult = pDest->iSdst; + regOrig = regResult = pDest->iSdst; if( srcTab>=0 ){ for(i=0; ipOrderBy), set the associated + ** iOrderByCol value to one more than the index of the ORDER BY + ** expression within the sort-key that pushOntoSorter() will generate. + ** This allows the pEList field to be omitted from the sorted record, + ** saving space and CPU cycles. */ + ecelFlags |= (SQLITE_ECEL_OMITREF|SQLITE_ECEL_REF); + for(i=pSort->nOBSat; ipOrderBy->nExpr; i++){ + int j; + if( (j = pSort->pOrderBy->a[i].u.x.iOrderByCol)>0 ){ + pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat; + } + } + regOrig = 0; + assert( eDest==SRT_Set || eDest==SRT_Mem + || eDest==SRT_Coroutine || eDest==SRT_Output ); + } + nResultCol = sqlite3ExprCodeExprList(pParse,pEList,regResult,0,ecelFlags); } /* If the DISTINCT keyword was present on the SELECT statement @@ -115197,7 +116237,7 @@ int r1; r1 = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol); sqlite3ReleaseTempReg(pParse, r1); break; } @@ -115234,7 +116274,7 @@ int addr = sqlite3VdbeCurrentAddr(v) + 4; sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm+1, r1,regResult,nResultCol); assert( pSort==0 ); } #endif @@ -115263,14 +116303,14 @@ ** does not matter. But there might be a LIMIT clause, in which ** case the order does matter */ pushOntoSorter( - pParse, pSort, p, regResult, regResult, nResultCol, nPrefixReg); + pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg); }else{ int r1 = sqlite3GetTempReg(pParse); assert( sqlite3Strlen30(pDest->zAffSdst)==nResultCol ); sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, nResultCol, r1, pDest->zAffSdst, nResultCol); sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol); sqlite3ReleaseTempReg(pParse, r1); } break; @@ -115289,11 +116329,12 @@ ** memory cells and break out of the scan loop. */ case SRT_Mem: { - assert( nResultCol==pDest->nSdst ); if( pSort ){ + assert( nResultCol<=pDest->nSdst ); pushOntoSorter( - pParse, pSort, p, regResult, regResult, nResultCol, nPrefixReg); + pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg); }else{ + assert( nResultCol==pDest->nSdst ); assert( regResult==iParm ); /* The LIMIT clause will jump out of the loop for us */ } @@ -115306,7 +116347,7 @@ testcase( eDest==SRT_Coroutine ); testcase( eDest==SRT_Output ); if( pSort ){ - pushOntoSorter(pParse, pSort, p, regResult, regResult, nResultCol, + pushOntoSorter(pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg); }else if( eDest==SRT_Coroutine ){ sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); @@ -115356,7 +116397,7 @@ } sqlite3VdbeAddOp2(v, OP_Sequence, iParm, r2+nKey); sqlite3VdbeAddOp3(v, OP_MakeRecord, r2, nKey+2, r1); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, r2, nKey+2); if( addrTest ) sqlite3VdbeJumpHere(v, addrTest); sqlite3ReleaseTempReg(pParse, r1); sqlite3ReleaseTempRange(pParse, r2, nKey+2); @@ -115591,14 +116632,13 @@ int iParm = pDest->iSDParm; int regRow; int regRowid; + int iCol; int nKey; int iSortTab; /* Sorter cursor to read from */ int nSortData; /* Trailing values to read from sorter */ int i; int bSeq; /* True if sorter record includes seq. no. */ -#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS struct ExprList_item *aOutEx = p->pEList->a; -#endif assert( addrBreak<0 ); if( pSort->labelBkOut ){ @@ -115636,8 +116676,14 @@ iSortTab = iTab; bSeq = 1; } - for(i=0; izAffSdst, nColumn); sqlite3ExprCacheAffinityChange(pParse, regRow, nColumn); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, regRowid); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, regRowid, regRow, nColumn); break; } case SRT_Mem: { @@ -116162,7 +117208,7 @@ /* The sqlite3ResultSetOfSelect() is only used n contexts where lookaside ** is disabled */ assert( db->lookaside.bDisable ); - pTab->nRef = 1; + pTab->nTabRef = 1; pTab->zName = 0; pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); sqlite3ColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol); @@ -116393,6 +117439,7 @@ /* Process the LIMIT and OFFSET clauses, if they exist */ addrBreak = sqlite3VdbeMakeLabel(v); + p->nSelectRow = 320; /* 4 billion rows */ computeLimitRegisters(pParse, p, addrBreak); pLimit = p->pLimit; pOffset = p->pOffset; @@ -116862,7 +117909,7 @@ computeLimitRegisters(pParse, p, iBreak); sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); r1 = sqlite3GetTempReg(pParse); - iStart = sqlite3VdbeAddOp2(v, OP_RowKey, tab1, r1); + iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1); sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); VdbeCoverage(v); sqlite3ReleaseTempReg(pParse, r1); selectInnerLoop(pParse, p, p->pEList, tab1, @@ -117029,7 +118076,8 @@ sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, r1, pDest->zAffSdst, pIn->nSdst); sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst); - sqlite3VdbeAddOp2(v, OP_IdxInsert, pDest->iSDParm, r1); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pDest->iSDParm, r1, + pIn->iSdst, pIn->nSdst); sqlite3ReleaseTempReg(pParse, r1); break; } @@ -117488,8 +118536,8 @@ #if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) /* Forward Declarations */ -static void substExprList(sqlite3*, ExprList*, int, ExprList*); -static void substSelect(sqlite3*, Select *, int, ExprList*, int); +static void substExprList(Parse*, ExprList*, int, ExprList*); +static void substSelect(Parse*, Select *, int, ExprList*, int); /* ** Scan through the expression pExpr. Replace every reference to @@ -117505,48 +118553,58 @@ ** of the subquery rather the result set of the subquery. */ static Expr *substExpr( - sqlite3 *db, /* Report malloc errors to this connection */ + Parse *pParse, /* Report errors here */ Expr *pExpr, /* Expr in which substitution occurs */ int iTable, /* Table to be substituted */ ExprList *pEList /* Substitute expressions */ ){ + sqlite3 *db = pParse->db; if( pExpr==0 ) return 0; if( pExpr->op==TK_COLUMN && pExpr->iTable==iTable ){ if( pExpr->iColumn<0 ){ pExpr->op = TK_NULL; }else{ Expr *pNew; + Expr *pCopy = pEList->a[pExpr->iColumn].pExpr; assert( pEList!=0 && pExpr->iColumnnExpr ); assert( pExpr->pLeft==0 && pExpr->pRight==0 ); - pNew = sqlite3ExprDup(db, pEList->a[pExpr->iColumn].pExpr, 0); - sqlite3ExprDelete(db, pExpr); - pExpr = pNew; + if( sqlite3ExprIsVector(pCopy) ){ + sqlite3VectorErrorMsg(pParse, pCopy); + }else{ + pNew = sqlite3ExprDup(db, pCopy, 0); + if( pNew && (pExpr->flags & EP_FromJoin) ){ + pNew->iRightJoinTable = pExpr->iRightJoinTable; + pNew->flags |= EP_FromJoin; + } + sqlite3ExprDelete(db, pExpr); + pExpr = pNew; + } } }else{ - pExpr->pLeft = substExpr(db, pExpr->pLeft, iTable, pEList); - pExpr->pRight = substExpr(db, pExpr->pRight, iTable, pEList); + pExpr->pLeft = substExpr(pParse, pExpr->pLeft, iTable, pEList); + pExpr->pRight = substExpr(pParse, pExpr->pRight, iTable, pEList); if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - substSelect(db, pExpr->x.pSelect, iTable, pEList, 1); + substSelect(pParse, pExpr->x.pSelect, iTable, pEList, 1); }else{ - substExprList(db, pExpr->x.pList, iTable, pEList); + substExprList(pParse, pExpr->x.pList, iTable, pEList); } } return pExpr; } static void substExprList( - sqlite3 *db, /* Report malloc errors here */ + Parse *pParse, /* Report errors here */ ExprList *pList, /* List to scan and in which to make substitutes */ int iTable, /* Table to be substituted */ ExprList *pEList /* Substitute values */ ){ int i; if( pList==0 ) return; for(i=0; inExpr; i++){ - pList->a[i].pExpr = substExpr(db, pList->a[i].pExpr, iTable, pEList); + pList->a[i].pExpr = substExpr(pParse, pList->a[i].pExpr, iTable, pEList); } } static void substSelect( - sqlite3 *db, /* Report malloc errors here */ + Parse *pParse, /* Report errors here */ Select *p, /* SELECT statement in which to make substitutions */ int iTable, /* Table to be replaced */ ExprList *pEList, /* Substitute values */ @@ -117557,17 +118615,17 @@ int i; if( !p ) return; do{ - substExprList(db, p->pEList, iTable, pEList); - substExprList(db, p->pGroupBy, iTable, pEList); - substExprList(db, p->pOrderBy, iTable, pEList); - p->pHaving = substExpr(db, p->pHaving, iTable, pEList); - p->pWhere = substExpr(db, p->pWhere, iTable, pEList); + substExprList(pParse, p->pEList, iTable, pEList); + substExprList(pParse, p->pGroupBy, iTable, pEList); + substExprList(pParse, p->pOrderBy, iTable, pEList); + p->pHaving = substExpr(pParse, p->pHaving, iTable, pEList); + p->pWhere = substExpr(pParse, p->pWhere, iTable, pEList); pSrc = p->pSrc; assert( pSrc!=0 ); for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ - substSelect(db, pItem->pSelect, iTable, pEList, 1); + substSelect(pParse, pItem->pSelect, iTable, pEList, 1); if( pItem->fg.isTabFunc ){ - substExprList(db, pItem->u1.pFuncArg, iTable, pEList); + substExprList(pParse, pItem->u1.pFuncArg, iTable, pEList); } } }while( doPrior && (p = p->pPrior)!=0 ); @@ -117964,12 +119022,12 @@ */ if( ALWAYS(pSubitem->pTab!=0) ){ Table *pTabToDel = pSubitem->pTab; - if( pTabToDel->nRef==1 ){ + if( pTabToDel->nTabRef==1 ){ Parse *pToplevel = sqlite3ParseToplevel(pParse); pTabToDel->pNextZombie = pToplevel->pZombieTab; pToplevel->pZombieTab = pTabToDel; }else{ - pTabToDel->nRef--; + pTabToDel->nTabRef--; } pSubitem->pTab = 0; } @@ -118092,7 +119150,7 @@ }else{ pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere); } - substSelect(db, pParent, iParent, pSub->pEList, 0); + substSelect(pParse, pParent, iParent, pSub->pEList, 0); /* The flattened query is distinct if either the inner or the ** outer query is distinct. @@ -118166,7 +119224,7 @@ ** terms are duplicated into the subquery. */ static int pushDownWhereTerms( - sqlite3 *db, /* The database connection (for malloc()) */ + Parse *pParse, /* Parse context (for malloc() and error reporting) */ Select *pSubq, /* The subquery whose WHERE clause is to be augmented */ Expr *pWhere, /* The WHERE clause of the outer query */ int iCursor /* Cursor number of the subquery */ @@ -118187,16 +119245,16 @@ return 0; /* restriction (3) */ } while( pWhere->op==TK_AND ){ - nChng += pushDownWhereTerms(db, pSubq, pWhere->pRight, iCursor); + nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight, iCursor); pWhere = pWhere->pLeft; } if( ExprHasProperty(pWhere,EP_FromJoin) ) return 0; /* restriction 5 */ if( sqlite3ExprIsTableConstant(pWhere, iCursor) ){ nChng++; while( pSubq ){ - pNew = sqlite3ExprDup(db, pWhere, 0); - pNew = substExpr(db, pNew, iCursor, pSubq->pEList); - pSubq->pWhere = sqlite3ExprAnd(db, pSubq->pWhere, pNew); + pNew = sqlite3ExprDup(pParse->db, pWhere, 0); + pNew = substExpr(pParse, pNew, iCursor, pSubq->pEList); + pSubq->pWhere = sqlite3ExprAnd(pParse->db, pSubq->pWhere, pNew); pSubq = pSubq->pPrior; } } @@ -118488,7 +119546,7 @@ assert( pFrom->pTab==0 ); pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); if( pTab==0 ) return WRC_Abort; - pTab->nRef = 1; + pTab->nTabRef = 1; pTab->zName = sqlite3DbStrDup(db, pCte->zName); pTab->iPKey = -1; pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); @@ -118511,20 +119569,20 @@ ){ pItem->pTab = pTab; pItem->fg.isRecursive = 1; - pTab->nRef++; + pTab->nTabRef++; pSel->selFlags |= SF_Recursive; } } } /* Only one recursive reference is permitted. */ - if( pTab->nRef>2 ){ + if( pTab->nTabRef>2 ){ sqlite3ErrorMsg( pParse, "multiple references to recursive table: %s", pCte->zName ); return SQLITE_ERROR; } - assert( pTab->nRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nRef==2 )); + assert( pTab->nTabRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 )); pCte->zCteErr = "circular reference: %s"; pSavedWith = pParse->pWith; @@ -118657,7 +119715,7 @@ if( sqlite3WalkSelect(pWalker, pSel) ) return WRC_Abort; pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); if( pTab==0 ) return WRC_Abort; - pTab->nRef = 1; + pTab->nTabRef = 1; pTab->zName = sqlite3MPrintf(db, "sqlite_sq_%p", (void*)pTab); while( pSel->pPrior ){ pSel = pSel->pPrior; } sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol); @@ -118670,13 +119728,13 @@ assert( pFrom->pTab==0 ); pFrom->pTab = pTab = sqlite3LocateTableItem(pParse, 0, pFrom); if( pTab==0 ) return WRC_Abort; - if( pTab->nRef==0xffff ){ + if( pTab->nTabRef>=0xffff ){ sqlite3ErrorMsg(pParse, "too many references to \"%s\": max 65535", pTab->zName); pFrom->pTab = 0; return WRC_Abort; } - pTab->nRef++; + pTab->nTabRef++; if( !IsVirtual(pTab) && cannotBeFunction(pParse, pFrom) ){ return WRC_Abort; } @@ -118826,10 +119884,10 @@ if( longNames || pTabList->nSrc>1 ){ Expr *pLeft; pLeft = sqlite3Expr(db, TK_ID, zTabName); - pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0); + pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight); if( zSchemaName ){ pLeft = sqlite3Expr(db, TK_ID, zSchemaName); - pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr, 0); + pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr); } if( longNames ){ zColname = sqlite3MPrintf(db, "%s.%s", zTabName, zName); @@ -119066,8 +120124,8 @@ for(i=0, pF=pAggInfo->aFunc; inFunc; i++, pF++){ ExprList *pList = pF->pExpr->x.pList; assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) ); - sqlite3VdbeAddOp4(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0, 0, - (void*)pF->pFunc, P4_FUNCDEF); + sqlite3VdbeAddOp2(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0); + sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF); } } @@ -119118,8 +120176,8 @@ if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem; sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ); } - sqlite3VdbeAddOp4(v, OP_AggStep0, 0, regAgg, pF->iMem, - (void*)pF->pFunc, P4_FUNCDEF); + sqlite3VdbeAddOp3(v, OP_AggStep0, 0, regAgg, pF->iMem); + sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF); sqlite3VdbeChangeP5(v, (u8)nArg); sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg); sqlite3ReleaseTempRange(pParse, regAgg, nArg); @@ -119353,7 +120411,7 @@ ** inside the subquery. This can help the subquery to run more efficiently. */ if( (pItem->fg.jointype & JT_OUTER)==0 - && pushDownWhereTerms(db, pSub, p->pWhere, pItem->iCursor) + && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor) ){ #if SELECTTRACE_ENABLED if( sqlite3SelectTrace & 0x100 ){ @@ -119515,7 +120573,9 @@ /* Set the limiter. */ iEnd = sqlite3VdbeMakeLabel(v); - p->nSelectRow = 320; /* 4 billion rows */ + if( (p->selFlags & SF_FixedLimit)==0 ){ + p->nSelectRow = 320; /* 4 billion rows */ + } computeLimitRegisters(pParse, p, iEnd); if( p->iLimit==0 && sSort.addrSortIndex>=0 ){ sqlite3VdbeChangeOpcode(v, sSort.addrSortIndex, OP_SorterOpen); @@ -120576,7 +121636,7 @@ z = sqlite3DbStrNDup(db, (char*)pAll->z, pAll->n); sqlite3NestedParse(pParse, "INSERT INTO %Q.%s VALUES('trigger',%Q,%Q,0,'CREATE TRIGGER %q')", - db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), zName, + db->aDb[iDb].zDbSName, MASTER_NAME, zName, pTrig->table, z); sqlite3DbFree(db, z); sqlite3ChangeCookie(pParse, iDb); @@ -120827,7 +121887,7 @@ if( (v = sqlite3GetVdbe(pParse))!=0 ){ sqlite3NestedParse(pParse, "DELETE FROM %Q.%s WHERE name=%Q AND type='trigger'", - db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), pTrigger->zName + db->aDb[iDb].zDbSName, MASTER_NAME, pTrigger->zName ); sqlite3ChangeCookie(pParse, iDb); sqlite3VdbeAddOp4(v, OP_DropTrigger, iDb, 0, 0, pTrigger->zName, 0); @@ -121439,7 +122499,7 @@ sqlite3ValueFromExpr(sqlite3VdbeDb(v), pCol->pDflt, enc, pCol->affinity, &pValue); if( pValue ){ - sqlite3VdbeChangeP4(v, -1, (const char *)pValue, P4_MEM); + sqlite3VdbeAppendP4(v, pValue, P4_MEM); } #ifndef SQLITE_OMIT_FLOATING_POINT if( pTab->aCol[i].affinity==SQLITE_AFF_REAL ){ @@ -121652,12 +122712,14 @@ int reg; if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){ reg = ++pParse->nMem; + pParse->nMem += pIdx->nColumn; }else{ reg = 0; for(i=0; inKeyCol; i++){ i16 iIdxCol = pIdx->aiColumn[i]; if( iIdxCol<0 || aXRef[iIdxCol]>=0 ){ reg = ++pParse->nMem; + pParse->nMem += pIdx->nColumn; break; } } @@ -121768,7 +122830,7 @@ }else{ sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey, sqlite3IndexAffinityStr(db, pPk), nPk); - sqlite3VdbeAddOp2(v, OP_IdxInsert, iEph, regKey); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEph, regKey, iPk, nPk); } sqlite3WhereEnd(pWInfo); } @@ -121820,7 +122882,7 @@ }else if( pPk ){ labelContinue = sqlite3VdbeMakeLabel(v); sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); - addrTop = sqlite3VdbeAddOp2(v, OP_RowKey, iEph, regKey); + addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey); sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); VdbeCoverage(v); }else{ @@ -121978,7 +123040,7 @@ regNewRowid ); if( !pParse->nested ){ - sqlite3VdbeChangeP4(v, -1, (char*)pTab, P4_TABLE); + sqlite3VdbeAppendP4(v, pTab, P4_TABLE); } #else if( hasFK || chngKey || pPk!=0 ){ @@ -122027,15 +123089,6 @@ } sqlite3VdbeResolveLabel(v, labelBreak); - /* Close all tables */ - for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ - assert( aRegIdx ); - if( aToOpen[i+1] ){ - sqlite3VdbeAddOp2(v, OP_Close, iIdxCur+i, 0); - } - } - if( iDataCurzName = zCopy; + pMod->pModule = pModule; + pMod->pAux = pAux; + pMod->xDestroy = xDestroy; + pMod->pEpoTab = 0; + pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod); + assert( pDel==0 || pDel==pMod ); + if( pDel ){ + sqlite3OomFault(db); + sqlite3DbFree(db, pDel); + pMod = 0; + } + } + return pMod; +} + +/* ** The actual function that does the work of creating a new module. ** This function implements the sqlite3_create_module() and ** sqlite3_create_module_v2() interfaces. @@ -122598,35 +123686,15 @@ void (*xDestroy)(void *) /* Module destructor function */ ){ int rc = SQLITE_OK; - int nName; sqlite3_mutex_enter(db->mutex); - nName = sqlite3Strlen30(zName); if( sqlite3HashFind(&db->aModule, zName) ){ rc = SQLITE_MISUSE_BKPT; }else{ - Module *pMod; - pMod = (Module *)sqlite3DbMallocRawNN(db, sizeof(Module) + nName + 1); - if( pMod ){ - Module *pDel; - char *zCopy = (char *)(&pMod[1]); - memcpy(zCopy, zName, nName+1); - pMod->zName = zCopy; - pMod->pModule = pModule; - pMod->pAux = pAux; - pMod->xDestroy = xDestroy; - pMod->pEpoTab = 0; - pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod); - assert( pDel==0 || pDel==pMod ); - if( pDel ){ - sqlite3OomFault(db); - sqlite3DbFree(db, pDel); - } - } + (void)sqlite3VtabCreateModule(db, zName, pModule, pAux, xDestroy); } rc = sqlite3ApiExit(db, rc); if( rc!=SQLITE_OK && xDestroy ) xDestroy(pAux); - sqlite3_mutex_leave(db->mutex); return rc; } @@ -122965,7 +124033,7 @@ "UPDATE %Q.%s " "SET type='table', name=%Q, tbl_name=%Q, rootpage=0, sql=%Q " "WHERE rowid=#%d", - db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), + db->aDb[iDb].zDbSName, MASTER_NAME, pTab->zName, pTab->zName, zStmt, @@ -123690,7 +124758,7 @@ return 0; } pMod->pEpoTab = pTab; - pTab->nRef = 1; + pTab->nTabRef = 1; pTab->pSchema = db->aDb[0].pSchema; pTab->tabFlags |= TF_Virtual; pTab->nModuleArg = 0; @@ -125483,7 +126551,7 @@ sqlite3VdbeAddOp2(v, OP_Integer, nConstraint, iReg+1); sqlite3VdbeAddOp4(v, OP_VFilter, iCur, addrNotFound, iReg, pLoop->u.vtab.idxStr, - pLoop->u.vtab.needFree ? P4_MPRINTF : P4_STATIC); + pLoop->u.vtab.needFree ? P4_DYNAMIC : P4_STATIC); VdbeCoverage(v); pLoop->u.vtab.needFree = 0; pLevel->p1 = iCur; @@ -125516,7 +126584,7 @@ /* Generate code that will continue to the next row if ** the IN constraint is not satisfied */ - pCompare = sqlite3PExpr(pParse, TK_EQ, 0, 0, 0); + pCompare = sqlite3PExpr(pParse, TK_EQ, 0, 0); assert( pCompare!=0 || db->mallocFailed ); if( pCompare ){ pCompare->pLeft = pTerm->pExpr->pLeft; @@ -126115,7 +127183,7 @@ pAndExpr = sqlite3ExprAnd(db, pAndExpr, pExpr); } if( pAndExpr ){ - pAndExpr = sqlite3PExpr(pParse, TK_AND|TKFLG_DONTFOLD, 0, pAndExpr, 0); + pAndExpr = sqlite3PExpr(pParse, TK_AND|TKFLG_DONTFOLD, 0, pAndExpr); } } @@ -126188,7 +127256,8 @@ } if( iSet>=0 ){ sqlite3VdbeAddOp3(v, OP_MakeRecord, r, nPk, regRowid); - sqlite3VdbeAddOp3(v, OP_IdxInsert, regRowset, regRowid, 0); + sqlite3VdbeAddOp4Int(v, OP_IdxInsert, regRowset, regRowid, + r, nPk); if( iSet ) sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); } @@ -127116,7 +128185,7 @@ } assert( pLeft!=0 ); pDup = sqlite3ExprDup(db, pLeft, 0); - pNew = sqlite3PExpr(pParse, TK_IN, pDup, 0, 0); + pNew = sqlite3PExpr(pParse, TK_IN, pDup, 0); if( pNew ){ int idxNew; transferJoinMarkings(pNew, pExpr); @@ -127414,7 +128483,7 @@ int idxNew; pNewExpr = sqlite3PExpr(pParse, ops[i], sqlite3ExprDup(db, pExpr->pLeft, 0), - sqlite3ExprDup(db, pList->a[i].pExpr, 0), 0); + sqlite3ExprDup(db, pList->a[i].pExpr, 0)); transferJoinMarkings(pNewExpr, pExpr); idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); testcase( idxNew==0 ); @@ -127499,15 +128568,15 @@ pNewExpr1 = sqlite3ExprDup(db, pLeft, 0); pNewExpr1 = sqlite3PExpr(pParse, TK_GE, sqlite3ExprAddCollateString(pParse,pNewExpr1,zCollSeqName), - pStr1, 0); + pStr1); transferJoinMarkings(pNewExpr1, pExpr); idxNew1 = whereClauseInsert(pWC, pNewExpr1, wtFlags); testcase( idxNew1==0 ); exprAnalyze(pSrc, pWC, idxNew1); pNewExpr2 = sqlite3ExprDup(db, pLeft, 0); pNewExpr2 = sqlite3PExpr(pParse, TK_LT, sqlite3ExprAddCollateString(pParse,pNewExpr2,zCollSeqName), - pStr2, 0); + pStr2); transferJoinMarkings(pNewExpr2, pExpr); idxNew2 = whereClauseInsert(pWC, pNewExpr2, wtFlags); testcase( idxNew2==0 ); @@ -127540,7 +128609,7 @@ if( (prereqExpr & prereqColumn)==0 ){ Expr *pNewExpr; pNewExpr = sqlite3PExpr(pParse, TK_MATCH, - 0, sqlite3ExprDup(db, pRight, 0), 0); + 0, sqlite3ExprDup(db, pRight, 0)); idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); testcase( idxNew==0 ); pNewTerm = &pWC->a[idxNew]; @@ -127579,7 +128648,7 @@ Expr *pLeft = sqlite3ExprForVectorField(pParse, pExpr->pLeft, i); Expr *pRight = sqlite3ExprForVectorField(pParse, pExpr->pRight, i); - pNew = sqlite3PExpr(pParse, pExpr->op, pLeft, pRight, 0); + pNew = sqlite3PExpr(pParse, pExpr->op, pLeft, pRight); transferJoinMarkings(pNew, pExpr); idxNew = whereClauseInsert(pWC, pNew, TERM_DYNAMIC); exprAnalyze(pSrc, pWC, idxNew); @@ -127631,7 +128700,7 @@ pNewExpr = sqlite3PExpr(pParse, TK_GT, sqlite3ExprDup(db, pLeft, 0), - sqlite3ExprAlloc(db, TK_NULL, 0, 0), 0); + sqlite3ExprAlloc(db, TK_NULL, 0, 0)); idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC|TERM_VNULL); @@ -127817,7 +128886,7 @@ pColRef->iColumn = k++; pColRef->pTab = pTab; pTerm = sqlite3PExpr(pParse, TK_EQ, pColRef, - sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0), 0); + sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0)); whereClauseInsert(pWC, pTerm, TERM_DYNAMIC); } } @@ -128024,11 +129093,13 @@ WhereTerm *pTerm; /* The term being tested */ int k = pScan->k; /* Where to start scanning */ - while( pScan->iEquiv<=pScan->nEquiv ){ - iCur = pScan->aiCur[pScan->iEquiv-1]; + assert( pScan->iEquiv<=pScan->nEquiv ); + pWC = pScan->pWC; + while(1){ iColumn = pScan->aiColumn[pScan->iEquiv-1]; - if( iColumn==XN_EXPR && pScan->pIdxExpr==0 ) return 0; - while( (pWC = pScan->pWC)!=0 ){ + iCur = pScan->aiCur[pScan->iEquiv-1]; + assert( pWC!=0 ); + do{ for(pTerm=pWC->a+k; knTerm; k++, pTerm++){ if( pTerm->leftCursor==iCur && pTerm->u.leftColumn==iColumn @@ -128078,15 +129149,17 @@ testcase( pTerm->eOperator & WO_IS ); continue; } + pScan->pWC = pWC; pScan->k = k+1; return pTerm; } } } - pScan->pWC = pScan->pWC->pOuter; + pWC = pWC->pOuter; k = 0; - } - pScan->pWC = pScan->pOrigWC; + }while( pWC!=0 ); + if( pScan->iEquiv>=pScan->nEquiv ) break; + pWC = pScan->pOrigWC; k = 0; pScan->iEquiv++; } @@ -128120,25 +129193,25 @@ u32 opMask, /* Operator(s) to scan for */ Index *pIdx /* Must be compatible with this index */ ){ - int j = 0; - - /* memset(pScan, 0, sizeof(*pScan)); */ pScan->pOrigWC = pWC; pScan->pWC = pWC; pScan->pIdxExpr = 0; + pScan->idxaff = 0; + pScan->zCollName = 0; if( pIdx ){ - j = iColumn; + int j = iColumn; iColumn = pIdx->aiColumn[j]; - if( iColumn==XN_EXPR ) pScan->pIdxExpr = pIdx->aColExpr->a[j].pExpr; - if( iColumn==pIdx->pTable->iPKey ) iColumn = XN_ROWID; + if( iColumn==XN_EXPR ){ + pScan->pIdxExpr = pIdx->aColExpr->a[j].pExpr; + }else if( iColumn==pIdx->pTable->iPKey ){ + iColumn = XN_ROWID; + }else if( iColumn>=0 ){ + pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity; + pScan->zCollName = pIdx->azColl[j]; + } + }else if( iColumn==XN_EXPR ){ + return 0; } - if( pIdx && iColumn>=0 ){ - pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity; - pScan->zCollName = pIdx->azColl[j]; - }else{ - pScan->idxaff = 0; - pScan->zCollName = 0; - } pScan->opMask = opMask; pScan->k = 0; pScan->aiCur[0] = iCur; @@ -132733,27 +133806,6 @@ continue; } - /* Close all of the cursors that were opened by sqlite3WhereBegin. - ** Except, do not close cursors that will be reused by the OR optimization - ** (WHERE_OR_SUBCLAUSE). And do not close the OP_OpenWrite cursors - ** created for the ONEPASS optimization. - */ - if( (pTab->tabFlags & TF_Ephemeral)==0 - && pTab->pSelect==0 - && (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)==0 - ){ - int ws = pLoop->wsFlags; - if( pWInfo->eOnePass==ONEPASS_OFF && (ws & WHERE_IDX_ONLY)==0 ){ - sqlite3VdbeAddOp1(v, OP_Close, pTabItem->iCursor); - } - if( (ws & WHERE_INDEXED)!=0 - && (ws & (WHERE_IPK|WHERE_AUTO_INDEX))==0 - && pLevel->iIdxCur!=pWInfo->aiCurOnePass[1] - ){ - sqlite3VdbeAddOp1(v, OP_Close, pLevel->iIdxCur); - } - } - /* If this scan uses an index, make VDBE code substitutions to read data ** from the index instead of from the table where possible. In some cases ** this optimization prevents the table from ever being read, which can @@ -132959,7 +134011,7 @@ ExprSpan *pLeft, /* The left operand, and output */ ExprSpan *pRight /* The right operand */ ){ - pLeft->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr, 0); + pLeft->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr); pLeft->zEnd = pRight->zEnd; } @@ -132968,7 +134020,7 @@ */ static void exprNot(Parse *pParse, int doNot, ExprSpan *pSpan){ if( doNot ){ - pSpan->pExpr = sqlite3PExpr(pParse, TK_NOT, pSpan->pExpr, 0, 0); + pSpan->pExpr = sqlite3PExpr(pParse, TK_NOT, pSpan->pExpr, 0); } } @@ -132980,7 +134032,7 @@ ExprSpan *pOperand, /* The operand, and output */ Token *pPostOp /* The operand token for setting the span */ ){ - pOperand->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0); + pOperand->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0); pOperand->zEnd = &pPostOp->z[pPostOp->n]; } @@ -133005,7 +134057,7 @@ Token *pPreOp /* The operand token for setting the span */ ){ pOut->zStart = pPreOp->z; - pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0); + pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0); pOut->zEnd = pOperand->zEnd; } @@ -134598,7 +135650,6 @@ */ static void yyStackOverflow(yyParser *yypParser){ sqlite3ParserARG_FETCH; - yypParser->yytos--; #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt); @@ -134653,12 +135704,14 @@ #endif #if YYSTACKDEPTH>0 if( yypParser->yytos>=&yypParser->yystack[YYSTACKDEPTH] ){ + yypParser->yytos--; yyStackOverflow(yypParser); return; } #else if( yypParser->yytos>=&yypParser->yystack[yypParser->yystksz] ){ if( yyGrowStack(yypParser) ){ + yypParser->yytos--; yyStackOverflow(yypParser); return; } @@ -135200,7 +136253,7 @@ case 33: /* ccons ::= DEFAULT MINUS term */ { ExprSpan v; - v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy190.pExpr, 0, 0); + v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy190.pExpr, 0); v.zStart = yymsp[-1].minor.yy0.z; v.zEnd = yymsp[0].minor.yy190.zEnd; sqlite3AddDefaultValue(pParse,&v); @@ -135464,9 +136517,9 @@ break; case 94: /* selcollist ::= sclp nm DOT STAR */ { - Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0, 0); - Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0); - Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0); + Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0); + Expr *pLeft = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); + Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight); yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, pDot); } break; @@ -135692,17 +136745,17 @@ Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1); spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2, 0); + yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2); } break; case 155: /* expr ::= nm DOT nm DOT nm */ { Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-4].minor.yy0, 1); Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *temp3 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1); - Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3, 0); + Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3); spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4); } break; case 158: /* term ::= INTEGER */ @@ -135731,7 +136784,7 @@ sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &t); yymsp[0].minor.yy190.pExpr = 0; }else{ - yymsp[0].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0, 0); + yymsp[0].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0); if( yymsp[0].minor.yy190.pExpr ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy190.pExpr->iTable); } } @@ -135746,7 +136799,8 @@ case 161: /* expr ::= CAST LP expr AS typetoken RP */ { spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-5].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CAST, yymsp[-3].minor.yy190.pExpr, 0, &yymsp[-1].minor.yy0); + yymsp[-5].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_CAST, &yymsp[-1].minor.yy0, 1); + sqlite3ExprAttachSubtrees(pParse->db, yymsp[-5].minor.yy190.pExpr, yymsp[-3].minor.yy190.pExpr, 0); } break; case 162: /* expr ::= ID|INDEXED LP distinct exprlist RP */ @@ -135779,7 +136833,7 @@ case 165: /* expr ::= LP nexprlist COMMA expr RP */ { ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy148, yymsp[-1].minor.yy190.pExpr); - yylhsminor.yy190.pExpr = sqlite3PExpr(pParse, TK_VECTOR, 0, 0, 0); + yylhsminor.yy190.pExpr = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); if( yylhsminor.yy190.pExpr ){ yylhsminor.yy190.pExpr->x.pList = pList; spanSet(&yylhsminor.yy190, &yymsp[-4].minor.yy0, &yymsp[0].minor.yy0); @@ -135868,7 +136922,7 @@ { ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy190.pExpr, 0, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy190.pExpr, 0); if( yymsp[-4].minor.yy190.pExpr ){ yymsp[-4].minor.yy190.pExpr->x.pList = pList; }else{ @@ -135890,7 +136944,7 @@ ** regardless of the value of expr1. */ sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, &sqlite3IntTokens[yymsp[-3].minor.yy194]); + yymsp[-4].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[yymsp[-3].minor.yy194],1); }else if( yymsp[-1].minor.yy148->nExpr==1 ){ /* Expressions of the form: ** @@ -135917,9 +136971,9 @@ pRHS->flags &= ~EP_Collate; pRHS->flags |= EP_Generic; } - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy194 ? TK_NE : TK_EQ, yymsp[-4].minor.yy190.pExpr, pRHS, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy194 ? TK_NE : TK_EQ, yymsp[-4].minor.yy190.pExpr, pRHS); }else{ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); if( yymsp[-4].minor.yy190.pExpr ){ yymsp[-4].minor.yy190.pExpr->x.pList = yymsp[-1].minor.yy148; sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy190.pExpr); @@ -135934,13 +136988,13 @@ case 192: /* expr ::= LP select RP */ { spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ - yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0, 0); + yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0); sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy190.pExpr, yymsp[-1].minor.yy243); } break; case 193: /* expr ::= expr in_op LP select RP */ { - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, yymsp[-1].minor.yy243); exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; @@ -135951,7 +137005,7 @@ SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0); Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0); if( yymsp[0].minor.yy148 ) sqlite3SrcListFuncArgs(pParse, pSelect ? pSrc : 0, yymsp[0].minor.yy148); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, pSelect); exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); yymsp[-4].minor.yy190.zEnd = yymsp[-1].minor.yy0.z ? &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n] : &yymsp[-2].minor.yy0.z[yymsp[-2].minor.yy0.n]; @@ -135961,14 +137015,14 @@ { Expr *p; spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ - p = yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0, 0); + p = yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0); sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy243); } break; case 196: /* expr ::= CASE case_operand case_exprlist case_else END */ { spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-C*/ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy72, 0, 0); + yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy72, 0); if( yymsp[-4].minor.yy190.pExpr ){ yymsp[-4].minor.yy190.pExpr->x.pList = yymsp[-1].minor.yy72 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy148,yymsp[-1].minor.yy72) : yymsp[-2].minor.yy148; sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy190.pExpr); @@ -136142,7 +137196,7 @@ case 247: /* expr ::= RAISE LP IGNORE RP */ { spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, 0); + yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0); if( yymsp[-3].minor.yy190.pExpr ){ yymsp[-3].minor.yy190.pExpr->affinity = OE_Ignore; } @@ -136151,7 +137205,7 @@ case 248: /* expr ::= RAISE LP raisetype COMMA nm RP */ { spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-5].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, &yymsp[-1].minor.yy0); + yymsp[-5].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_RAISE, &yymsp[-1].minor.yy0, 1); if( yymsp[-5].minor.yy190.pExpr ) { yymsp[-5].minor.yy190.pExpr->affinity = (char)yymsp[-3].minor.yy194; } @@ -136650,13 +137704,13 @@ /* 1x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, /* 2x */ 27, 27, 27, 27, 27, 7, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, /* 3x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, -/* 4x */ 7, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 12, 17, 20, 10, +/* 4x */ 7, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 26, 12, 17, 20, 10, /* 5x */ 24, 27, 27, 27, 27, 27, 27, 27, 27, 27, 15, 4, 21, 18, 19, 27, -/* 6x */ 11, 16, 27, 27, 27, 27, 27, 27, 27, 27, 27, 23, 22, 1, 13, 7, +/* 6x */ 11, 16, 27, 27, 27, 27, 27, 27, 27, 27, 27, 23, 22, 1, 13, 6, /* 7x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 8, 5, 5, 5, 8, 14, 8, /* 8x */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27, /* 9x */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27, -/* 9x */ 25, 1, 1, 1, 1, 1, 1, 0, 1, 1, 27, 27, 27, 27, 27, 27, +/* Ax */ 27, 25, 1, 1, 1, 1, 1, 0, 1, 1, 27, 27, 27, 27, 27, 27, /* Bx */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 9, 27, 27, 27, 27, 27, /* Cx */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27, /* Dx */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27, @@ -137358,8 +138412,7 @@ assert( pParse->pNewTable==0 ); assert( pParse->pNewTrigger==0 ); assert( pParse->nVar==0 ); - assert( pParse->nzVar==0 ); - assert( pParse->azVar==0 ); + assert( pParse->pVList==0 ); while( 1 ){ assert( i>=0 ); if( zSql[i]!=0 ){ @@ -137446,8 +138499,7 @@ if( pParse->pWithToFree ) sqlite3WithDelete(db, pParse->pWithToFree); sqlite3DeleteTrigger(db, pParse->pNewTrigger); - for(i=pParse->nzVar-1; i>=0; i--) sqlite3DbFree(db, pParse->azVar[i]); - sqlite3DbFree(db, pParse->azVar); + sqlite3DbFree(db, pParse->pVList); while( pParse->pAinc ){ AutoincInfo *p = pParse->pAinc; pParse->pAinc = p->pNext; @@ -138660,6 +139712,7 @@ { SQLITE_DBCONFIG_ENABLE_TRIGGER, SQLITE_EnableTrigger }, { SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER, SQLITE_Fts3Tokenizer }, { SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, SQLITE_LoadExtension }, + { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE, SQLITE_NoCkptOnClose }, }; unsigned int i; rc = SQLITE_ERROR; /* IMP: R-42790-23372 */ @@ -139417,7 +140470,7 @@ */ SQLITE_API void sqlite3_interrupt(sqlite3 *db){ #ifdef SQLITE_ENABLE_API_ARMOR - if( !sqlite3SafetyCheckOk(db) ){ + if( !sqlite3SafetyCheckOk(db) && (db==0 || db->magic!=SQLITE_MAGIC_ZOMBIE) ){ (void)SQLITE_MISUSE_BKPT; return; } @@ -139956,6 +141009,13 @@ sqlite3Error(db, rc); } rc = sqlite3ApiExit(db, rc); + + /* If there are no active statements, clear the interrupt flag at this + ** point. */ + if( db->nVdbeActive==0 ){ + db->u1.isInterrupted = 0; + } + sqlite3_mutex_leave(db->mutex); return rc; #endif @@ -140458,6 +141518,7 @@ assert( octet>=0 && octet<256 ); if( octet==0 ){ +#ifndef SQLITE_ENABLE_URI_00_ERROR /* This branch is taken when "%00" appears within the URI. In this ** case we ignore all text in the remainder of the path, name or ** value currently being parsed. So ignore the current character @@ -140470,6 +141531,12 @@ iIn++; } continue; +#else + /* If ENABLE_URI_00_ERROR is defined, "%00" in a URI is an error. */ + *pzErrMsg = sqlite3_mprintf("unexpected %%00 in uri"); + rc = SQLITE_ERROR; + goto parse_uri_out; +#endif } c = octet; }else if( eState==1 && (c=='&' || c=='=') ){ @@ -140574,7 +141641,9 @@ }else{ zFile = sqlite3_malloc64(nUri+2); if( !zFile ) return SQLITE_NOMEM_BKPT; - memcpy(zFile, zUri, nUri); + if( nUri ){ + memcpy(zFile, zUri, nUri); + } zFile[nUri] = '\0'; zFile[nUri+1] = '\0'; flags &= ~SQLITE_OPEN_URI; @@ -141368,7 +142437,7 @@ */ SQLITE_API int sqlite3_test_control(int op, ...){ int rc = 0; -#ifdef SQLITE_OMIT_BUILTIN_TEST +#ifdef SQLITE_UNTESTABLE UNUSED_PARAMETER(op); #else va_list ap; @@ -141705,7 +142774,7 @@ } } va_end(ap); -#endif /* SQLITE_OMIT_BUILTIN_TEST */ +#endif /* SQLITE_UNTESTABLE */ return rc; } @@ -141761,15 +142830,8 @@ ** Return the Btree pointer identified by zDbName. Return NULL if not found. */ SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3 *db, const char *zDbName){ - int i; - for(i=0; inDb; i++){ - if( db->aDb[i].pBt - && (zDbName==0 || sqlite3StrICmp(zDbName, db->aDb[i].zDbSName)==0) - ){ - return db->aDb[i].pBt; - } - } - return 0; + int iDb = zDbName ? sqlite3FindDbName(db, zDbName) : 0; + return iDb<0 ? 0 : db->aDb[iDb].pBt; } /* @@ -141816,7 +142878,6 @@ ){ int rc = SQLITE_ERROR; #ifndef SQLITE_OMIT_WAL - int iDb; #ifdef SQLITE_ENABLE_API_ARMOR if( !sqlite3SafetyCheckOk(db) ){ @@ -141825,13 +142886,15 @@ #endif sqlite3_mutex_enter(db->mutex); - iDb = sqlite3FindDbName(db, zDb); - if( iDb==0 || iDb>1 ){ - Btree *pBt = db->aDb[iDb].pBt; - if( 0==sqlite3BtreeIsInTrans(pBt) ){ - rc = sqlite3BtreeBeginTrans(pBt, 0); - if( rc==SQLITE_OK ){ - rc = sqlite3PagerSnapshotGet(sqlite3BtreePager(pBt), ppSnapshot); + if( db->autoCommit==0 ){ + int iDb = sqlite3FindDbName(db, zDb); + if( iDb==0 || iDb>1 ){ + Btree *pBt = db->aDb[iDb].pBt; + if( 0==sqlite3BtreeIsInTrans(pBt) ){ + rc = sqlite3BtreeBeginTrans(pBt, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSnapshotGet(sqlite3BtreePager(pBt), ppSnapshot); + } } } } @@ -141879,6 +142942,38 @@ } /* +** Recover as many snapshots as possible from the wal file associated with +** schema zDb of database db. +*/ +SQLITE_API int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb){ + int rc = SQLITE_ERROR; + int iDb; +#ifndef SQLITE_OMIT_WAL + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif + + sqlite3_mutex_enter(db->mutex); + iDb = sqlite3FindDbName(db, zDb); + if( iDb==0 || iDb>1 ){ + Btree *pBt = db->aDb[iDb].pBt; + if( 0==sqlite3BtreeIsInReadTrans(pBt) ){ + rc = sqlite3BtreeBeginTrans(pBt, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSnapshotRecover(sqlite3BtreePager(pBt)); + sqlite3BtreeCommit(pBt); + } + } + } + sqlite3_mutex_leave(db->mutex); +#endif /* SQLITE_OMIT_WAL */ + return rc; +} + +/* ** Free a snapshot handle obtained from sqlite3_snapshot_get(). */ SQLITE_API void sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){ @@ -172118,9 +173213,7 @@ if( aBuf ){ sessionVarintPut(&aBuf[1], n); - memcpy(&aBuf[nVarint + 1], eType==SQLITE_TEXT ? - sqlite3_value_text(pValue) : sqlite3_value_blob(pValue), n - ); + if( n ) memcpy(&aBuf[nVarint + 1], z, n); } nByte = 1 + nVarint + n; @@ -173536,7 +174629,7 @@ int nBlob, int *pRc ){ - if( 0==sessionBufferGrow(p, nBlob, pRc) ){ + if( nBlob>0 && 0==sessionBufferGrow(p, nBlob, pRc) ){ memcpy(&p->aBuf[p->nBuf], aBlob, nBlob); p->nBuf += nBlob; } @@ -173722,13 +174815,13 @@ } default: { - int nByte; - int nHdr = 1 + sessionVarintGet(&pCsr[1], &nByte); + int n; + int nHdr = 1 + sessionVarintGet(&pCsr[1], &n); assert( eType==SQLITE_TEXT || eType==SQLITE_BLOB ); - nAdvance = nHdr + nByte; + nAdvance = nHdr + n; if( eType==sqlite3_column_type(pStmt, i) - && nByte==sqlite3_column_bytes(pStmt, i) - && 0==memcmp(&pCsr[nHdr], sqlite3_column_blob(pStmt, i), nByte) + && n==sqlite3_column_bytes(pStmt, i) + && (n==0 || 0==memcmp(&pCsr[nHdr], sqlite3_column_blob(pStmt, i), n)) ){ break; } @@ -176983,12 +178076,13 @@ c = z[++i]; if( c=='u' ){ u32 v = 0, k; - for(k=0; k<4 && i='0' && c<='9' ) v = v*16 + c - '0'; - else if( c>='A' && c<='F' ) v = v*16 + c - 'A' + 10; - else if( c>='a' && c<='f' ) v = v*16 + c - 'a' + 10; - else break; + assert( safe_isxdigit(c) ); + if( c<='9' ) v = v*16 + c - '0'; + else if( c<='F' ) v = v*16 + c - 'A' + 10; + else v = v*16 + c - 'a' + 10; } if( v==0 ) break; if( v<=0x7f ){ @@ -180710,7 +181804,6 @@ */ static void fts5yyStackOverflow(fts5yyParser *fts5yypParser){ sqlite3Fts5ParserARG_FETCH; - fts5yypParser->fts5yytos--; #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sStack Overflow!\n",fts5yyTracePrompt); @@ -180765,12 +181858,14 @@ #endif #if fts5YYSTACKDEPTH>0 if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5YYSTACKDEPTH] ){ + fts5yypParser->fts5yytos--; fts5yyStackOverflow(fts5yypParser); return; } #else if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5yypParser->fts5yystksz] ){ if( fts5yyGrowStack(fts5yypParser) ){ + fts5yypParser->fts5yytos--; fts5yyStackOverflow(fts5yypParser); return; } @@ -184082,48 +185177,61 @@ ** Initialize all term iterators in the pNear object. If any term is found ** to match no documents at all, return immediately without initializing any ** further iterators. +** +** If an error occurs, return an SQLite error code. Otherwise, return +** SQLITE_OK. It is not considered an error if some term matches zero +** documents. */ static int fts5ExprNearInitAll( Fts5Expr *pExpr, Fts5ExprNode *pNode ){ Fts5ExprNearset *pNear = pNode->pNear; - int i, j; - int rc = SQLITE_OK; - int bEof = 1; + int i; assert( pNode->bNomatch==0 ); - for(i=0; rc==SQLITE_OK && inPhrase; i++){ + for(i=0; inPhrase; i++){ Fts5ExprPhrase *pPhrase = pNear->apPhrase[i]; - for(j=0; jnTerm; j++){ - Fts5ExprTerm *pTerm = &pPhrase->aTerm[j]; - Fts5ExprTerm *p; + if( pPhrase->nTerm==0 ){ + pNode->bEof = 1; + return SQLITE_OK; + }else{ + int j; + for(j=0; jnTerm; j++){ + Fts5ExprTerm *pTerm = &pPhrase->aTerm[j]; + Fts5ExprTerm *p; + int bHit = 0; - for(p=pTerm; p && rc==SQLITE_OK; p=p->pSynonym){ - if( p->pIter ){ - sqlite3Fts5IterClose(p->pIter); - p->pIter = 0; + for(p=pTerm; p; p=p->pSynonym){ + int rc; + if( p->pIter ){ + sqlite3Fts5IterClose(p->pIter); + p->pIter = 0; + } + rc = sqlite3Fts5IndexQuery( + pExpr->pIndex, p->zTerm, (int)strlen(p->zTerm), + (pTerm->bPrefix ? FTS5INDEX_QUERY_PREFIX : 0) | + (pExpr->bDesc ? FTS5INDEX_QUERY_DESC : 0), + pNear->pColset, + &p->pIter + ); + assert( (rc==SQLITE_OK)==(p->pIter!=0) ); + if( rc!=SQLITE_OK ) return rc; + if( 0==sqlite3Fts5IterEof(p->pIter) ){ + bHit = 1; + } } - rc = sqlite3Fts5IndexQuery( - pExpr->pIndex, p->zTerm, (int)strlen(p->zTerm), - (pTerm->bPrefix ? FTS5INDEX_QUERY_PREFIX : 0) | - (pExpr->bDesc ? FTS5INDEX_QUERY_DESC : 0), - pNear->pColset, - &p->pIter - ); - assert( rc==SQLITE_OK || p->pIter==0 ); - if( p->pIter && 0==sqlite3Fts5IterEof(p->pIter) ){ - bEof = 0; + + if( bHit==0 ){ + pNode->bEof = 1; + return SQLITE_OK; } } - - if( bEof ) break; } - if( bEof ) break; } - pNode->bEof = bEof; - return rc; + pNode->bEof = 0; + return SQLITE_OK; } /* @@ -184667,7 +185775,10 @@ /* If not at EOF but the current rowid occurs earlier than iFirst in ** the iteration order, move to document iFirst or later. */ - if( pRoot->bEof==0 && fts5RowidCmp(p, pRoot->iRowid, iFirst)<0 ){ + if( rc==SQLITE_OK + && 0==pRoot->bEof + && fts5RowidCmp(p, pRoot->iRowid, iFirst)<0 + ){ rc = fts5ExprNodeNext(p, pRoot, 1, iFirst); } @@ -195661,7 +196772,7 @@ ){ assert( nArg==0 ); UNUSED_PARAM2(nArg, apUnused); - sqlite3_result_text(pCtx, "fts5: 2016-11-28 19:13:37 bbd85d235f7037c6a033a9690534391ffeacecc8", -1, SQLITE_TRANSIENT); + sqlite3_result_text(pCtx, "fts5: 2017-01-02 11:57:58 04ac0b75b1716541b2b97704f4809cb7ef19cccf", -1, SQLITE_TRANSIENT); } static int fts5Init(sqlite3 *db){ Index: ext/sqlite3/sqlite3.h =================================================================== diff -u -r1b493d168198c71cffd0e132c90a20a7877c2bad -r9385e0380e81d2423e5131455fe275f66f473690 --- ext/sqlite3/sqlite3.h (.../sqlite3.h) (revision 1b493d168198c71cffd0e132c90a20a7877c2bad) +++ ext/sqlite3/sqlite3.h (.../sqlite3.h) (revision 9385e0380e81d2423e5131455fe275f66f473690) @@ -121,13 +121,13 @@ ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.15.2" -#define SQLITE_VERSION_NUMBER 3015002 -#define SQLITE_SOURCE_ID "2016-11-28 19:13:37 bbd85d235f7037c6a033a9690534391ffeacecc8" +#define SQLITE_VERSION "3.16.0" +#define SQLITE_VERSION_NUMBER 3016000 +#define SQLITE_SOURCE_ID "2017-01-02 11:57:58 04ac0b75b1716541b2b97704f4809cb7ef19cccf" /* ** CAPI3REF: Run-Time Library Version Numbers -** KEYWORDS: sqlite3_version, sqlite3_sourceid +** KEYWORDS: sqlite3_version sqlite3_sourceid ** ** These interfaces provide the same information as the [SQLITE_VERSION], ** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros @@ -1035,6 +1035,7 @@ #define SQLITE_FCNTL_VFS_POINTER 27 #define SQLITE_FCNTL_JOURNAL_POINTER 28 #define SQLITE_FCNTL_WIN32_GET_HANDLE 29 +#define SQLITE_FCNTL_PDB 30 /* deprecated names */ #define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE @@ -1987,6 +1988,18 @@ ** until after the database connection closes. ** ** +**
SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE
+**
Usually, when a database in wal mode is closed or detached from a +** database handle, SQLite checks if this will mean that there are now no +** connections at all to the database. If so, it performs a checkpoint +** operation before closing the connection. This option may be used to +** override this behaviour. The first parameter passed to this operation +** is an integer - non-zero to disable checkpoints-on-close, or zero (the +** default) to enable them. The second parameter is a pointer to an integer +** into which is written 0 or 1 to indicate whether checkpoints-on-close +** have been disabled - 0 if they are not disabled, 1 if they are. +**
+** ** */ #define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */ @@ -1995,6 +2008,7 @@ #define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */ +#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */ /* @@ -3596,6 +3610,10 @@ ** sqlite3_stmt_readonly() to return true since, while those statements ** change the configuration of a database connection, they do not make ** changes to the content of the database files on disk. +** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since +** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and +** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so +** sqlite3_stmt_readonly() returns false for those commands. */ SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt); @@ -8211,7 +8229,8 @@ ** ** See also: [sqlite3_update_hook()] */ -SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_preupdate_hook( +#if defined(SQLITE_ENABLE_PREUPDATE_HOOK) +SQLITE_API void *sqlite3_preupdate_hook( sqlite3 *db, void(*xPreUpdate)( void *pCtx, /* Copy of third arg to preupdate_hook() */ @@ -8224,10 +8243,11 @@ ), void* ); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_count(sqlite3 *); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_depth(sqlite3 *); -SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **); +SQLITE_API int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **); +SQLITE_API int sqlite3_preupdate_count(sqlite3 *); +SQLITE_API int sqlite3_preupdate_depth(sqlite3 *); +SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **); +#endif /* ** CAPI3REF: Low-level system error code @@ -8243,7 +8263,7 @@ /* ** CAPI3REF: Database Snapshot -** KEYWORDS: {snapshot} +** KEYWORDS: {snapshot} {sqlite3_snapshot} ** EXPERIMENTAL ** ** An instance of the snapshot object records the state of a [WAL mode] @@ -8267,7 +8287,9 @@ ** to an historical snapshot (if possible). The destructor for ** sqlite3_snapshot objects is [sqlite3_snapshot_free()]. */ -typedef struct sqlite3_snapshot sqlite3_snapshot; +typedef struct sqlite3_snapshot { + unsigned char hidden[48]; +} sqlite3_snapshot; /* ** CAPI3REF: Record A Database Snapshot @@ -8278,10 +8300,33 @@ ** schema S in database connection D. ^On success, the ** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly ** created [sqlite3_snapshot] object into *P and returns SQLITE_OK. -** ^If schema S of [database connection] D is not a [WAL mode] database -** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)] -** leaves the *P value unchanged and returns an appropriate [error code]. +** If there is not already a read-transaction open on schema S when +** this function is called, one is opened automatically. ** +** The following must be true for this function to succeed. If any of +** the following statements are false when sqlite3_snapshot_get() is +** called, SQLITE_ERROR is returned. The final value of *P is undefined +** in this case. +** +**
    +**
  • The database handle must be in [autocommit mode]. +** +**
  • Schema S of [database connection] D must be a [WAL mode] database. +** +**
  • There must not be a write transaction open on schema S of database +** connection D. +** +**
  • One or more transactions must have been written to the current wal +** file since it was created on disk (by any connection). This means +** that a snapshot cannot be taken on a wal mode database with no wal +** file immediately after it is first opened. At least one transaction +** must be written to it first. +**
+** +** This function may also return SQLITE_NOMEM. If it is called with the +** database handle in autocommit mode but fails for some other reason, +** whether or not a read transaction is opened on schema S is undefined. +** ** The [sqlite3_snapshot] object returned from a successful call to ** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()] ** to avoid a memory leak. @@ -8374,6 +8419,28 @@ ); /* +** CAPI3REF: Recover snapshots from a wal file +** EXPERIMENTAL +** +** If all connections disconnect from a database file but do not perform +** a checkpoint, the existing wal file is opened along with the database +** file the next time the database is opened. At this point it is only +** possible to successfully call sqlite3_snapshot_open() to open the most +** recent snapshot of the database (the one at the head of the wal file), +** even though the wal file may contain other valid snapshots for which +** clients have sqlite3_snapshot handles. +** +** This function attempts to scan the wal file associated with database zDb +** of database handle db and make all valid snapshots available to +** sqlite3_snapshot_open(). It is an error if there is already a read +** transaction open on the database, or if the database is not a wal mode +** database. +** +** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +*/ +SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb); + +/* ** Undo the hack that converts floating point types to integer for ** builds on processors without floating point support. */ Index: ext/sqlite3/sqlite3.rc =================================================================== diff -u -r1b493d168198c71cffd0e132c90a20a7877c2bad -r9385e0380e81d2423e5131455fe275f66f473690 Binary files differ Index: ext/sqlite3/version.txt =================================================================== diff -u -r1b493d168198c71cffd0e132c90a20a7877c2bad -r9385e0380e81d2423e5131455fe275f66f473690 --- ext/sqlite3/version.txt (.../version.txt) (revision 1b493d168198c71cffd0e132c90a20a7877c2bad) +++ ext/sqlite3/version.txt (.../version.txt) (revision 9385e0380e81d2423e5131455fe275f66f473690) @@ -1,2 +1,2 @@ -SQLite 3.15.2.0 +SQLite 3.16.0.0 Downloaded from www.sqlite.org