Index: ext/sqlite3/shell.c
===================================================================
diff -u -r0973305126aaa89ff5fcab7414526e4b0a8b41e3 -r5e4863063b087416abc0263bee46243d1162c7d8
--- ext/sqlite3/shell.c	(.../shell.c)	(revision 0973305126aaa89ff5fcab7414526e4b0a8b41e3)
+++ ext/sqlite3/shell.c	(.../shell.c)	(revision 5e4863063b087416abc0263bee46243d1162c7d8)
@@ -143,6 +143,7 @@
 extern char *sqlite3_win32_unicode_to_utf8(LPCWSTR);
 extern char *sqlite3_win32_mbcs_to_utf8_v2(const char *, int);
 extern char *sqlite3_win32_utf8_to_mbcs_v2(const char *, int);
+extern LPWSTR sqlite3_win32_utf8_to_unicode(const char *zText);
 #endif
 
 /* On Windows, we normally run with output mode of TEXT so that \n characters
@@ -524,7 +525,7 @@
 #if defined(_WIN32) || defined(WIN32)
   /* For interactive input on Windows systems, translate the
   ** multi-byte characterset characters into UTF-8. */
-  if( stdin_is_interactive ){
+  if( stdin_is_interactive && in==stdin ){
     char *zTrans = sqlite3_win32_mbcs_to_utf8_v2(zLine, 0);
     if( zTrans ){
       int nTrans = strlen30(zTrans)+1;
@@ -626,8 +627,10 @@
   int normalMode;        /* Output mode before ".explain on" */
   int writableSchema;    /* True if PRAGMA writable_schema=ON */
   int showHeader;        /* True to show column names in List or Column mode */
+  int nCheck;            /* Number of ".check" commands run */
   unsigned shellFlgs;    /* Various flags */
   char *zDestTable;      /* Name of destination table when MODE_Insert */
+  char zTestcase[30];    /* Name of current test case */
   char colSeparator[20]; /* Column separator character for several modes */
   char rowSeparator[20]; /* Row separator character for MODE_Ascii */
   int colWidth[100];     /* Requested width of each column when in column mode*/
@@ -894,6 +897,7 @@
 }
 #endif
 
+#ifndef SQLITE_OMIT_AUTHORIZATION
 /*
 ** When the ".auth ON" is set, the following authorizer callback is
 ** invoked.  It always returns SQLITE_OK.
@@ -926,7 +930,7 @@
   az[1] = zA2;
   az[2] = zA3;
   az[3] = zA4;
-  raw_printf(p->out, "authorizer: %s", azAction[op]);
+  utf8_printf(p->out, "authorizer: %s", azAction[op]);
   for(i=0; i<4; i++){
     raw_printf(p->out, " ");
     if( az[i] ){
@@ -938,8 +942,9 @@
   raw_printf(p->out, "\n");
   return SQLITE_OK;
 }
-  
+#endif
 
+
 /*
 ** This is the callback routine that the shell
 ** invokes for each row of a query result.
@@ -1442,7 +1447,7 @@
     for(i=0; i<ArraySize(aTrans); i++){
       int n = (int)strlen(aTrans[i].zPattern);
       if( strncmp(aTrans[i].zPattern, z, n)==0 ){
-        raw_printf(out, "%-36s %s", aTrans[i].zDesc, &z[n]);
+        utf8_printf(out, "%-36s %s", aTrans[i].zDesc, &z[n]);
         break;
       }
     }
@@ -2131,11 +2136,14 @@
 ** Text of a help message
 */
 static char zHelp[] =
+#ifndef SQLITE_OMIT_AUTHORIZATION
   ".auth ON|OFF           Show authorizer callbacks\n"
+#endif
   ".backup ?DB? FILE      Backup DB (default \"main\") to FILE\n"
   ".bail on|off           Stop after hitting an error.  Default OFF\n"
   ".binary on|off         Turn binary output on or off.  Default OFF\n"
   ".changes on|off        Show number of rows changed by SQL\n"
+  ".check GLOB            Fail if output since .testcase does not match\n"
   ".clone NEWDB           Clone data into NEWDB from the existing database\n"
   ".databases             List names and files of attached databases\n"
   ".dbinfo ?DB?           Show status information about the database\n"
@@ -2173,7 +2181,8 @@
   "                         tcl      TCL list elements\n"
   ".nullvalue STRING      Use STRING in place of NULL values\n"
   ".once FILENAME         Output for the next SQL command only to FILENAME\n"
-  ".open ?FILENAME?       Close existing database and reopen FILENAME\n"
+  ".open ?--new? ?FILE?   Close existing database and reopen FILE\n"
+  "                         The --new starts with an empty file\n"
   ".output ?FILENAME?     Send output to FILENAME or stdout\n"
   ".print STRING...       Print literal STRING\n"
   ".prompt MAIN CONTINUE  Replace the standard prompts\n"
@@ -2196,6 +2205,7 @@
   ".tables ?TABLE?        List names of tables\n"
   "                         If TABLE specified, only list tables matching\n"
   "                         LIKE pattern TABLE.\n"
+  ".testcase NAME         Begin redirecting output to 'testcase-out.txt'\n"
   ".timeout MS            Try opening locked tables for MS milliseconds\n"
   ".timer on|off          Turn SQL timer on or off\n"
   ".trace FILE|off        Output each SQL statement as it is run\n"
@@ -2232,7 +2242,36 @@
 
 /* Forward reference */
 static int process_input(ShellState *p, FILE *in);
+
+
 /*
+** Read the content of a file into memory obtained from sqlite3_malloc64().
+** The caller is responsible for freeing the memory.
+**
+** NULL is returned if any error is encountered.
+*/
+static char *readFile(const char *zName){
+  FILE *in = fopen(zName, "rb");
+  long nIn;
+  size_t nRead;
+  char *pBuf;
+  if( in==0 ) return 0;
+  fseek(in, 0, SEEK_END);
+  nIn = ftell(in);
+  rewind(in);
+  pBuf = sqlite3_malloc64( nIn+1 );
+  if( pBuf==0 ) return 0;
+  nRead = fread(pBuf, nIn, 1, in);
+  fclose(in);
+  if( nRead!=1 ){
+    sqlite3_free(pBuf);
+    return 0;
+  }
+  pBuf[nIn] = 0;
+  return pBuf;
+}
+
+/*
 ** Implementation of the "readfile(X)" SQL function.  The entire content
 ** of the file named X is read and returned as a BLOB.  NULL is returned
 ** if the file does not exist or is unreadable.
@@ -2243,25 +2282,13 @@
   sqlite3_value **argv
 ){
   const char *zName;
-  FILE *in;
-  long nIn;
   void *pBuf;
 
   UNUSED_PARAMETER(argc);
   zName = (const char*)sqlite3_value_text(argv[0]);
   if( zName==0 ) return;
-  in = fopen(zName, "rb");
-  if( in==0 ) return;
-  fseek(in, 0, SEEK_END);
-  nIn = ftell(in);
-  rewind(in);
-  pBuf = sqlite3_malloc64( nIn );
-  if( pBuf && 1==fread(pBuf, nIn, 1, in) ){
-    sqlite3_result_blob(context, pBuf, nIn, sqlite3_free);
-  }else{
-    sqlite3_free(pBuf);
-  }
-  fclose(in);
+  pBuf = readFile(zName);
+  if( pBuf ) sqlite3_result_blob(context, pBuf, -1, sqlite3_free);
 }
 
 /*
@@ -3064,6 +3091,104 @@
 }
 
 /*
+** Compare the pattern in zGlob[] against the text in z[].  Return TRUE
+** if they match and FALSE (0) if they do not match.
+**
+** Globbing rules:
+**
+**      '*'       Matches any sequence of zero or more characters.
+**
+**      '?'       Matches exactly one character.
+**
+**     [...]      Matches one character from the enclosed list of
+**                characters.
+**
+**     [^...]     Matches one character not in the enclosed list.
+**
+**      '#'       Matches any sequence of one or more digits with an
+**                optional + or - sign in front
+**
+**      ' '       Any span of whitespace matches any other span of
+**                whitespace.
+**
+** Extra whitespace at the end of z[] is ignored.
+*/
+static int testcase_glob(const char *zGlob, const char *z){
+  int c, c2;
+  int invert;
+  int seen;
+
+  while( (c = (*(zGlob++)))!=0 ){
+    if( IsSpace(c) ){
+      if( !IsSpace(*z) ) return 0;
+      while( IsSpace(*zGlob) ) zGlob++;
+      while( IsSpace(*z) ) z++;
+    }else if( c=='*' ){
+      while( (c=(*(zGlob++))) == '*' || c=='?' ){
+        if( c=='?' && (*(z++))==0 ) return 0;
+      }
+      if( c==0 ){
+        return 1;
+      }else if( c=='[' ){
+        while( *z && testcase_glob(zGlob-1,z)==0 ){
+          z++;
+        }
+        return (*z)!=0;
+      }
+      while( (c2 = (*(z++)))!=0 ){
+        while( c2!=c ){
+          c2 = *(z++);
+          if( c2==0 ) return 0;
+        }
+        if( testcase_glob(zGlob,z) ) return 1;
+      }
+      return 0;
+    }else if( c=='?' ){
+      if( (*(z++))==0 ) return 0;
+    }else if( c=='[' ){
+      int prior_c = 0;
+      seen = 0;
+      invert = 0;
+      c = *(z++);
+      if( c==0 ) return 0;
+      c2 = *(zGlob++);
+      if( c2=='^' ){
+        invert = 1;
+        c2 = *(zGlob++);
+      }
+      if( c2==']' ){
+        if( c==']' ) seen = 1;
+        c2 = *(zGlob++);
+      }
+      while( c2 && c2!=']' ){
+        if( c2=='-' && zGlob[0]!=']' && zGlob[0]!=0 && prior_c>0 ){
+          c2 = *(zGlob++);
+          if( c>=prior_c && c<=c2 ) seen = 1;
+          prior_c = 0;
+        }else{
+          if( c==c2 ){
+            seen = 1;
+          }
+          prior_c = c2;
+        }
+        c2 = *(zGlob++);
+      }
+      if( c2==0 || (seen ^ invert)==0 ) return 0;
+    }else if( c=='#' ){
+      if( (z[0]=='-' || z[0]=='+') && IsDigit(z[1]) ) z++;
+      if( !IsDigit(z[0]) ) return 0;
+      z++;
+      while( IsDigit(z[0]) ){ z++; }
+    }else{
+      if( c!=(*(z++)) ) return 0;
+    }
+  }
+  while( IsSpace(*z) ){ z++; }
+  return *z==0;
+}
+
+
+/*
 ** Compare the string as a command-line option with either one or two
 ** initial "-" characters.
 */
@@ -3075,6 +3200,21 @@
 }
 
 /*
+** Delete a file.
+*/
+int shellDeleteFile(const char *zFilename){
+  int rc;
+#ifdef _WIN32
+  wchar_t *z = sqlite3_win32_utf8_to_unicode(zFilename);
+  rc = _wunlink(z);
+  sqlite3_free(z);
+#else
+  rc = unlink(zFilename);
+#endif
+  return rc;
+}
+
+/*
 ** If an input line begins with "." then invoke this routine to
 ** process that line.
 **
@@ -3117,6 +3257,7 @@
   n = strlen30(azArg[0]);
   c = azArg[0][0];
 
+#ifndef SQLITE_OMIT_AUTHORIZATION
   if( c=='a' && strncmp(azArg[0], "auth", n)==0 ){
     if( nArg!=2 ){
       raw_printf(stderr, "Usage: .auth ON|OFF\n");
@@ -3130,6 +3271,7 @@
       sqlite3_set_authorizer(p->db, 0, 0);
     }
   }else
+#endif
 
   if( (c=='b' && n>=3 && strncmp(azArg[0], "backup", n)==0)
    || (c=='s' && n>=3 && strncmp(azArg[0], "save", n)==0)
@@ -3225,6 +3367,31 @@
     }
   }else
 
+  /* Cancel output redirection, if it is currently set (by .testcase)
+  ** Then read the content of the testcase-out.txt file and compare against
+  ** azArg[1].  If there are differences, report an error and exit.
+  */
+  if( c=='c' && n>=3 && strncmp(azArg[0], "check", n)==0 ){
+    char *zRes = 0;
+    output_reset(p);
+    if( nArg!=2 ){
+      raw_printf(stderr, "Usage: .check GLOB-PATTERN\n");
+      rc = 2;
+    }else if( (zRes = readFile("testcase-out.txt"))==0 ){
+      raw_printf(stderr, "Error: cannot read 'testcase-out.txt'\n");
+      rc = 2;
+    }else if( testcase_glob(azArg[1],zRes)==0 ){
+      utf8_printf(stderr,
+                 "testcase-%s FAILED\n Expected: [%s]\n      Got: [%s]\n",
+                 p->zTestcase, azArg[1], zRes);
+      rc = 2;
+    }else{
+      utf8_printf(stdout, "testcase-%s ok\n", p->zTestcase);
+      p->nCheck++;
+    }
+    sqlite3_free(zRes);
+  }else
+
   if( c=='c' && strncmp(azArg[0], "clone", n)==0 ){
     if( nArg==2 ){
       tryToClone(p, azArg[1]);
@@ -3833,23 +4000,44 @@
   }else
 
   if( c=='o' && strncmp(azArg[0], "open", n)==0 && n>=2 ){
-    sqlite3 *savedDb = p->db;
-    const char *zSavedFilename = p->zDbFilename;
-    char *zNewFilename = 0;
+    char *zNewFilename;  /* Name of the database file to open */
+    int iName = 1;       /* Index in azArg[] of the filename */
+    int newFlag = 0;     /* True to delete file before opening */
+    /* Close the existing database */
+    session_close_all(p);
+    sqlite3_close(p->db);
     p->db = 0;
-    if( nArg>=2 ) zNewFilename = sqlite3_mprintf("%s", azArg[1]);
-    p->zDbFilename = zNewFilename;
-    open_db(p, 1);
-    if( p->db!=0 ){
-      session_close_all(p);
-      sqlite3_close(savedDb);
-      sqlite3_free(p->zFreeOnClose);
-      p->zFreeOnClose = zNewFilename;
-    }else{
-      sqlite3_free(zNewFilename);
-      p->db = savedDb;
-      p->zDbFilename = zSavedFilename;
+    sqlite3_free(p->zFreeOnClose);
+    p->zFreeOnClose = 0;
+    /* Check for command-line arguments */
+    for(iName=1; iName<nArg && azArg[iName][0]=='-'; iName++){
+      const char *z = azArg[iName];
+      if( optionMatch(z,"new") ){
+        newFlag = 1;
+      }else if( z[0]=='-' ){
+        utf8_printf(stderr, "unknown option: %s\n", z);
+        rc = 1;
+        goto meta_command_exit;
+      }
     }
+    /* If a filename is specified, try to open it first */
+    zNewFilename = nArg>iName ? sqlite3_mprintf("%s", azArg[iName]) : 0;
+    if( zNewFilename ){
+      if( newFlag ) shellDeleteFile(zNewFilename);
+      p->zDbFilename = zNewFilename;
+      open_db(p, 1);
+      if( p->db==0 ){
+        utf8_printf(stderr, "Error: cannot open '%s'\n", zNewFilename);
+        sqlite3_free(zNewFilename);
+      }else{
+        p->zFreeOnClose = zNewFilename;
+      }
+    }
+    if( p->db==0 ){
+      /* As a fall-back open a TEMP database */
+      p->zDbFilename = 0;
+      open_db(p, 0);
+    }
   }else
 
   if( c=='o'
@@ -4378,6 +4566,8 @@
       raw_printf(p->out, "%d ", p->colWidth[i]);
     }
     raw_printf(p->out, "\n");
+    utf8_printf(p->out, "%12.12s: %s\n", "filename",
+                p->zDbFilename ? p->zDbFilename : "");
   }else
 
   if( c=='s' && strncmp(azArg[0], "stats", n)==0 ){
@@ -4495,6 +4685,20 @@
     sqlite3_free(azResult);
   }else
 
+  /* Begin redirecting output to the file "testcase-out.txt" */
+  if( c=='t' && strcmp(azArg[0],"testcase")==0 ){
+    output_reset(p);
+    p->out = output_file_open("testcase-out.txt");
+    if( p->out==0 ){
+      utf8_printf(stderr, "Error: cannot open 'testcase-out.txt'\n");
+    }
+    if( nArg>=2 ){
+      sqlite3_snprintf(sizeof(p->zTestcase), p->zTestcase, "%s", azArg[1]);
+    }else{
+      sqlite3_snprintf(sizeof(p->zTestcase), p->zTestcase, "?");
+    }
+  }else
+
   if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 && nArg>=2 ){
     static const struct {
        const char *zCtrlName;   /* Name of a test-control option */
@@ -4905,7 +5109,7 @@
     zLine = one_input_line(in, zLine, nSql>0);
     if( zLine==0 ){
       /* End of input */
-      if( stdin_is_interactive ) printf("\n");
+      if( in==0 && stdin_is_interactive ) printf("\n");
       break;
     }
     if( seenInterrupt ){
@@ -5005,8 +5209,13 @@
 ** Return a pathname which is the user's home directory.  A
 ** 0 return indicates an error of some kind.
 */
-static char *find_home_dir(void){
+static char *find_home_dir(int clearFlag){
   static char *home_dir = NULL;
+  if( clearFlag ){
+    free(home_dir);
+    home_dir = 0;
+    return 0;
+  }
   if( home_dir ) return home_dir;
 
 #if !defined(_WIN32) && !defined(WIN32) && !defined(_WIN32_WCE) \
@@ -5081,7 +5290,7 @@
   FILE *in = NULL;
 
   if (sqliterc == NULL) {
-    home_dir = find_home_dir();
+    home_dir = find_home_dir(0);
     if( home_dir==0 ){
       raw_printf(stderr, "-- warning: cannot find home directory;"
                       " cannot read ~/.sqliterc\n");
@@ -5569,7 +5778,7 @@
         printf(".\nUse \".open FILENAME\" to reopen on a "
                "persistent database.\n");
       }
-      zHome = find_home_dir();
+      zHome = find_home_dir(0);
       if( zHome ){
         nHistory = strlen30(zHome) + 20;
         if( (zHistory = malloc(nHistory))!=0 ){
@@ -5593,6 +5802,7 @@
     sqlite3_close(data.db);
   }
   sqlite3_free(data.zFreeOnClose);
+  find_home_dir(1);
 #if !SQLITE_SHELL_IS_UTF8
   for(i=0; i<argc; i++) sqlite3_free(argv[i]);
   sqlite3_free(argv);
Index: ext/sqlite3/sqlite3.c
===================================================================
diff -u -r0973305126aaa89ff5fcab7414526e4b0a8b41e3 -r5e4863063b087416abc0263bee46243d1162c7d8
--- ext/sqlite3/sqlite3.c	(.../sqlite3.c)	(revision 0973305126aaa89ff5fcab7414526e4b0a8b41e3)
+++ ext/sqlite3/sqlite3.c	(.../sqlite3.c)	(revision 5e4863063b087416abc0263bee46243d1162c7d8)
@@ -1,6 +1,6 @@
 /******************************************************************************
 ** This file is an amalgamation of many separate C source files from SQLite
-** version 3.14.1.  By combining all the individual C code files into this 
+** version 3.15.0.  By combining all the individual C code files into this
 ** single large file, the entire code can be compiled as a single translation
 ** unit.  This allows many compilers to do optimizations that would not be
 ** possible if the files were compiled separately.  Performance improvements
@@ -9,7 +9,7 @@
 **
 ** This file is all you need to compile SQLite.  To use SQLite in other
 ** programs, you need this file and the "sqlite3.h" header file that defines
-** the programming interface to the SQLite library.  (If you do not have 
+** the programming interface to the SQLite library.  (If you do not have
 ** the "sqlite3.h" header file at hand, you will find a copy embedded within
 ** the text of this file.  Search for "Begin file sqlite3.h" to find the start
 ** of the embedded sqlite3.h header file.) Additional code files may be needed
@@ -368,7 +368,8 @@
 ** be held constant and Z will be incremented or else Y will be incremented
 ** and Z will be reset to zero.
 **
-** Since version 3.6.18, SQLite source code has been stored in the
+** Since [version 3.6.18] ([dateof:3.6.18]), 
+** SQLite source code has been stored in the
 ** <a href="http://www.fossil-scm.org/">Fossil configuration management
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
 ** a string which identifies a particular check-in of SQLite
@@ -380,9 +381,9 @@
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.14.1"
-#define SQLITE_VERSION_NUMBER 3014001
-#define SQLITE_SOURCE_ID      "2016-08-11 18:53:32 a12d8059770df4bca59e321c266410344242bf7b"
+#define SQLITE_VERSION        "3.15.0"
+#define SQLITE_VERSION_NUMBER 3015000
+#define SQLITE_SOURCE_ID      "2016-10-14 10:20:30 707875582fcba352b4906a595ad89198d84711d8"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -415,9 +416,9 @@
 ** See also: [sqlite_version()] and [sqlite_source_id()].
 */
 SQLITE_API const char sqlite3_version[] = SQLITE_VERSION;
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
 
 /*
 ** CAPI3REF: Run-Time Library Compilation Options Diagnostics
@@ -442,8 +443,8 @@
 ** [sqlite_compileoption_get()] and the [compile_options pragma].
 */
 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
 #endif
 
 /*
@@ -482,7 +483,7 @@
 **
 ** See the [threading mode] documentation for additional information.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
 
 /*
 ** CAPI3REF: Database Connection Handle
@@ -579,8 +580,8 @@
 ** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
 ** argument is a harmless no-op.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
 
 /*
 ** The type for a callback function.
@@ -651,7 +652,7 @@
 **      the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
 ** </ul>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
   sqlite3*,                                  /* An open database */
   const char *sql,                           /* SQL to be evaluated */
   int (*callback)(void*,int,char**,char**),  /* Callback function */
@@ -712,7 +713,8 @@
 ** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
 ** support for additional result codes that provide more detailed information
 ** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
@@ -1650,10 +1652,10 @@
 ** must return [SQLITE_OK] on success and some other [error code] upon
 ** failure.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
 
 /*
 ** CAPI3REF: Configuring The SQLite Library
@@ -1686,7 +1688,7 @@
 ** ^If the option is unknown or SQLite is unable to set the option
 ** then this routine returns a non-zero [error code].
 */
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
 
 /*
 ** CAPI3REF: Configure database connections
@@ -1705,7 +1707,7 @@
 ** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
 ** the call is considered successful.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Memory Allocation Routines
@@ -2229,8 +2231,18 @@
 ** be a NULL pointer, in which case the new setting is not reported back.
 ** </dd>
 **
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema.  ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main".  ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
 ** </dl>
 */
+#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
 #define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
 #define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
 #define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
@@ -2246,7 +2258,7 @@
 ** [extended result codes] feature of SQLite. ^The extended result
 ** codes are disabled by default for historical compatibility.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 
 /*
 ** CAPI3REF: Last Insert Rowid
@@ -2298,7 +2310,7 @@
 ** unpredictable and might not equal either the old or the new
 ** last insert [rowid].
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
 
 /*
 ** CAPI3REF: Count The Number Of Rows Modified
@@ -2351,7 +2363,7 @@
 ** while [sqlite3_changes()] is running then the value returned
 ** is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Total Number Of Rows Modified
@@ -2375,7 +2387,7 @@
 ** while [sqlite3_total_changes()] is running then the value
 ** returned is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
+SQLITE_API int sqlite3_total_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Interrupt A Long-Running Query
@@ -2415,7 +2427,7 @@
 ** If the database connection closes while [sqlite3_interrupt()]
 ** is running then bad things will likely happen.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Is Complete
@@ -2450,8 +2462,8 @@
 ** The input to [sqlite3_complete16()] must be a zero-terminated
 ** UTF-16 string in native byte order.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
 
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
@@ -2512,7 +2524,7 @@
 ** A busy handler must not close the database connection
 ** or [prepared statement] that invoked the busy handler.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
 
 /*
 ** CAPI3REF: Set A Busy Timeout
@@ -2535,7 +2547,7 @@
 **
 ** See also:  [PRAGMA busy_timeout]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
 /*
 ** CAPI3REF: Convenience Routines For Running Queries
@@ -2610,15 +2622,15 @@
 ** reflected in subsequent calls to [sqlite3_errcode()] or
 ** [sqlite3_errmsg()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
   sqlite3 *db,          /* An open database */
   const char *zSql,     /* SQL to be evaluated */
   char ***pazResult,    /* Results of the query */
   int *pnRow,           /* Number of result rows written here */
   int *pnColumn,        /* Number of result columns written here */
   char **pzErrmsg       /* Error msg written here */
 );
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
 
 /*
 ** CAPI3REF: Formatted String Printing Functions
@@ -2724,10 +2736,10 @@
 ** addition that after the string has been read and copied into
 ** the result, [sqlite3_free()] is called on the input string.)^
 */
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
 
 /*
 ** CAPI3REF: Memory Allocation Subsystem
@@ -2817,12 +2829,12 @@
 ** a block of memory after it has been released using
 ** [sqlite3_free()] or [sqlite3_realloc()].
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
 
 /*
 ** CAPI3REF: Memory Allocator Statistics
@@ -2847,8 +2859,8 @@
 ** by [sqlite3_memory_highwater(1)] is the high-water mark
 ** prior to the reset.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
 
 /*
 ** CAPI3REF: Pseudo-Random Number Generator
@@ -2871,7 +2883,7 @@
 ** internally and without recourse to the [sqlite3_vfs] xRandomness
 ** method.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
 
 /*
 ** CAPI3REF: Compile-Time Authorization Callbacks
@@ -2954,7 +2966,7 @@
 ** as stated in the previous paragraph, sqlite3_step() invokes
 ** sqlite3_prepare_v2() to reprepare a statement after a schema change.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
   sqlite3*,
   int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
   void *pUserData
@@ -3062,9 +3074,9 @@
 ** sqlite3_profile() function is considered experimental and is
 ** subject to change in future versions of SQLite.
 */
-SQLITE_API SQLITE_DEPRECATED void *SQLITE_STDCALL sqlite3_trace(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
    void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_DEPRECATED void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
    void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
 
 /*
@@ -3153,7 +3165,7 @@
 ** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
 ** are deprecated.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_trace_v2(
+SQLITE_API int sqlite3_trace_v2(
   sqlite3*,
   unsigned uMask,
   int(*xCallback)(unsigned,void*,void*,void*),
@@ -3192,7 +3204,7 @@
 ** database connections for the meaning of "modify" in this paragraph.
 **
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 
 /*
 ** CAPI3REF: Opening A New Database Connection
@@ -3421,15 +3433,15 @@
 **
 ** See also: [sqlite3_temp_directory]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
   const void *filename,   /* Database filename (UTF-16) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb,         /* OUT: SQLite db handle */
   int flags,              /* Flags */
@@ -3475,9 +3487,9 @@
 ** VFS method, then the behavior of this routine is undefined and probably
 ** undesirable.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
 
 
 /*
@@ -3521,11 +3533,11 @@
 ** was invoked incorrectly by the application.  In that case, the
 ** error code and message may or may not be set.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
 
 /*
 ** CAPI3REF: Prepared Statement Object
@@ -3593,7 +3605,7 @@
 **
 ** New run-time limit categories may be added in future releases.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
 
 /*
 ** CAPI3REF: Run-Time Limit Categories
@@ -3745,28 +3757,28 @@
 ** </li>
 ** </ol>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const void **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
@@ -3805,8 +3817,8 @@
 ** is obtained from [sqlite3_malloc()] and must be free by the application
 ** by passing it to [sqlite3_free()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
-SQLITE_API char *SQLITE_STDCALL sqlite3_expanded_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Writes The Database
@@ -3838,7 +3850,7 @@
 ** change the configuration of a database connection, they do not make 
 ** changes to the content of the database files on disk.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If A Prepared Statement Has Been Reset
@@ -3859,7 +3871,7 @@
 ** for example, in diagnostic routines to search for prepared 
 ** statements that are holding a transaction open.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Dynamically Typed Value Object
@@ -4023,20 +4035,20 @@
 ** See also: [sqlite3_bind_parameter_count()],
 ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
                         void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
                          void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
 
 /*
 ** CAPI3REF: Number Of SQL Parameters
@@ -4057,7 +4069,7 @@
 ** [sqlite3_bind_parameter_name()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Name Of A Host Parameter
@@ -4085,7 +4097,7 @@
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
 
 /*
 ** CAPI3REF: Index Of A Parameter With A Given Name
@@ -4102,7 +4114,7 @@
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_name()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
 
 /*
 ** CAPI3REF: Reset All Bindings On A Prepared Statement
@@ -4112,7 +4124,7 @@
 ** the [sqlite3_bind_blob | bindings] on a [prepared statement].
 ** ^Use this routine to reset all host parameters to NULL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number Of Columns In A Result Set
@@ -4124,7 +4136,7 @@
 **
 ** See also: [sqlite3_data_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Column Names In A Result Set
@@ -4153,8 +4165,8 @@
 ** then the name of the column is unspecified and may change from
 ** one release of SQLite to the next.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
 
 /*
 ** CAPI3REF: Source Of Data In A Query Result
@@ -4202,12 +4214,12 @@
 ** for the same [prepared statement] and result column
 ** at the same time then the results are undefined.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Declared Datatype Of A Query Result
@@ -4239,8 +4251,8 @@
 ** is associated with individual values, not with the containers
 ** used to hold those values.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Evaluate An SQL Statement
@@ -4301,7 +4313,8 @@
 ** other than [SQLITE_ROW] before any subsequent invocation of
 ** sqlite3_step().  Failure to reset the prepared statement using 
 ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step().  But after version 3.6.23.1, sqlite3_step() began
+** sqlite3_step().  But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
 ** calling [sqlite3_reset()] automatically in this circumstance rather
 ** than returning [SQLITE_MISUSE].  This is not considered a compatibility
 ** break because any application that ever receives an SQLITE_MISUSE error
@@ -4320,7 +4333,7 @@
 ** then the more specific [error codes] are returned directly
 ** by sqlite3_step().  The use of the "v2" interface is recommended.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number of columns in a result set
@@ -4341,7 +4354,7 @@
 **
 ** See also: [sqlite3_column_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Fundamental Datatypes
@@ -4531,16 +4544,16 @@
 ** pointer.  Subsequent calls to [sqlite3_errcode()] will return
 ** [SQLITE_NOMEM].)^
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
 
 /*
 ** CAPI3REF: Destroy A Prepared Statement Object
@@ -4568,7 +4581,7 @@
 ** statement after it has been finalized can result in undefined and
 ** undesirable behavior such as segfaults and heap corruption.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Reset A Prepared Statement Object
@@ -4595,7 +4608,7 @@
 ** ^The [sqlite3_reset(S)] interface does not change the values
 ** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Create Or Redefine SQL Functions
@@ -4695,7 +4708,7 @@
 ** close the database connection nor finalize or reset the prepared
 ** statement in which the function is running.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
@@ -4705,7 +4718,7 @@
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
   sqlite3 *db,
   const void *zFunctionName,
   int nArg,
@@ -4715,7 +4728,7 @@
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
@@ -4761,12 +4774,12 @@
 ** these functions, we will not explain what they do.
 */
 #ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
                       void*,sqlite3_int64);
 #endif
 
@@ -4816,18 +4829,18 @@
 ** These routines must be called from the same thread as
 ** the SQL function that supplied the [sqlite3_value*] parameters.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
 
 /*
 ** CAPI3REF: Finding The Subtype Of SQL Values
@@ -4843,7 +4856,7 @@
 ** from the result of one [application-defined SQL function] into the
 ** input of another.
 */
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
 
 /*
 ** CAPI3REF: Copy And Free SQL Values
@@ -4859,8 +4872,8 @@
 ** previously obtained from [sqlite3_value_dup()].  ^If V is a NULL pointer
 ** then sqlite3_value_free(V) is a harmless no-op.
 */
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
 
 /*
 ** CAPI3REF: Obtain Aggregate Function Context
@@ -4905,7 +4918,7 @@
 ** This routine must be called from the same thread in which
 ** the aggregate SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
 
 /*
 ** CAPI3REF: User Data For Functions
@@ -4920,7 +4933,7 @@
 ** This routine must be called from the same thread in which
 ** the application-defined function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
 
 /*
 ** CAPI3REF: Database Connection For Functions
@@ -4932,7 +4945,7 @@
 ** and [sqlite3_create_function16()] routines that originally
 ** registered the application defined function.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
 
 /*
 ** CAPI3REF: Function Auxiliary Data
@@ -4986,8 +4999,8 @@
 ** These routines must be called from the same thread in which
 ** the SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
 
 
 /*
@@ -5123,27 +5136,27 @@
 ** than the one containing the application-defined function that received
 ** the [sqlite3_context] pointer, the results are undefined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
                            sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
                            void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
 
 
 /*
@@ -5158,7 +5171,7 @@
 ** The number of subtype bytes preserved by SQLite might increase
 ** in future releases of SQLite.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
 
 /*
 ** CAPI3REF: Define New Collating Sequences
@@ -5240,22 +5253,22 @@
 **
 ** See also:  [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*),
   void(*xDestroy)(void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
   sqlite3*, 
   const void *zName,
   int eTextRep, 
@@ -5290,12 +5303,12 @@
 ** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
 ** [sqlite3_create_collation_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
   sqlite3*, 
   void*, 
   void(*)(void*,sqlite3*,int eTextRep,const char*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
   sqlite3*, 
   void*,
   void(*)(void*,sqlite3*,int eTextRep,const void*)
@@ -5309,11 +5322,11 @@
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
+SQLITE_API int sqlite3_key(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
+SQLITE_API int sqlite3_key_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The key */
@@ -5327,11 +5340,11 @@
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The new key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
+SQLITE_API int sqlite3_rekey_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The new key */
@@ -5341,7 +5354,7 @@
 ** Specify the activation key for a SEE database.  Unless 
 ** activated, none of the SEE routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
+SQLITE_API void sqlite3_activate_see(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
@@ -5351,7 +5364,7 @@
 ** Specify the activation key for a CEROD database.  Unless 
 ** activated, none of the CEROD routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
+SQLITE_API void sqlite3_activate_cerod(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
@@ -5373,7 +5386,7 @@
 ** all, then the behavior of sqlite3_sleep() may deviate from the description
 ** in the previous paragraphs.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
 
 /*
 ** CAPI3REF: Name Of The Folder Holding Temporary Files
@@ -5492,7 +5505,7 @@
 ** connection while this routine is running, then the return value
 ** is undefined.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
 
 /*
 ** CAPI3REF: Find The Database Handle Of A Prepared Statement
@@ -5505,7 +5518,7 @@
 ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
 ** create the statement in the first place.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Return The Filename For A Database Connection
@@ -5522,7 +5535,7 @@
 ** will be an absolute pathname, even if the filename used
 ** to open the database originally was a URI or relative pathname.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Determine if a database is read-only
@@ -5532,7 +5545,7 @@
 ** of connection D is read-only, 0 if it is read/write, or -1 if N is not
 ** the name of a database on connection D.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Find the next prepared statement
@@ -5548,7 +5561,7 @@
 ** [sqlite3_next_stmt(D,S)] must refer to an open database
 ** connection and in particular must not be a NULL pointer.
 */
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Commit And Rollback Notification Callbacks
@@ -5597,8 +5610,8 @@
 **
 ** See also the [sqlite3_update_hook()] interface.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
 
 /*
 ** CAPI3REF: Data Change Notification Callbacks
@@ -5649,7 +5662,7 @@
 ** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
 ** and [sqlite3_preupdate_hook()] interfaces.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
   sqlite3*, 
   void(*)(void *,int ,char const *,char const *,sqlite3_int64),
   void*
@@ -5664,7 +5677,8 @@
 ** and disabled if the argument is false.)^
 **
 ** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]). 
+** In prior versions of SQLite,
 ** sharing was enabled or disabled for each thread separately.
 **
 ** ^(The cache sharing mode set by this interface effects all subsequent
@@ -5689,7 +5703,7 @@
 **
 ** See Also:  [SQLite Shared-Cache Mode]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
 
 /*
 ** CAPI3REF: Attempt To Free Heap Memory
@@ -5705,7 +5719,7 @@
 **
 ** See also: [sqlite3_db_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
 
 /*
 ** CAPI3REF: Free Memory Used By A Database Connection
@@ -5719,7 +5733,7 @@
 **
 ** See also: [sqlite3_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
 
 /*
 ** CAPI3REF: Impose A Limit On Heap Size
@@ -5758,7 +5772,8 @@
 **      from the heap.
 ** </ul>)^
 **
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]), 
+** the soft heap limit is enforced
 ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
 ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
 ** the soft heap limit is enforced on every memory allocation.  Without
@@ -5771,7 +5786,7 @@
 ** The circumstances under which SQLite will enforce the soft heap limit may
 ** changes in future releases of SQLite.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
 
 /*
 ** CAPI3REF: Deprecated Soft Heap Limit Interface
@@ -5782,7 +5797,7 @@
 ** only.  All new applications should use the
 ** [sqlite3_soft_heap_limit64()] interface rather than this one.
 */
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
 
 
 /*
@@ -5852,7 +5867,7 @@
 ** parsed, if that has not already been done, and returns an error if
 ** any errors are encountered while loading the schema.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
   sqlite3 *db,                /* Connection handle */
   const char *zDbName,        /* Database name or NULL */
   const char *zTableName,     /* Table name */
@@ -5908,7 +5923,7 @@
 **
 ** See also the [load_extension() SQL function].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
   sqlite3 *db,          /* Load the extension into this database connection */
   const char *zFile,    /* Name of the shared library containing extension */
   const char *zProc,    /* Entry point.  Derived from zFile if 0 */
@@ -5940,7 +5955,7 @@
 ** remains disabled. This will prevent SQL injections from giving attackers
 ** access to extension loading capabilities.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
 
 /*
 ** CAPI3REF: Automatically Load Statically Linked Extensions
@@ -5978,7 +5993,7 @@
 ** See also: [sqlite3_reset_auto_extension()]
 ** and [sqlite3_cancel_auto_extension()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void(*xEntryPoint)(void));
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Cancel Automatic Extension Loading
@@ -5990,15 +6005,15 @@
 ** unregistered and it returns 0 if X was not on the list of initialization
 ** routines.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Reset Automatic Extension Loading
 **
 ** ^This interface disables all automatic extensions previously
 ** registered using [sqlite3_auto_extension()].
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
+SQLITE_API void sqlite3_reset_auto_extension(void);
 
 /*
 ** The interface to the virtual-table mechanism is currently considered
@@ -6152,13 +6167,15 @@
 ** the xUpdate method are automatically rolled back by SQLite.
 **
 ** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]). 
+** If a virtual table extension is
 ** used with an SQLite version earlier than 3.8.2, the results of attempting 
 ** to read or write the estimatedRows field are undefined (but are likely 
 ** to included crashing the application). The estimatedRows field should
 ** therefore only be used if [sqlite3_libversion_number()] returns a
 ** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
+** was added for [version 3.9.0] ([dateof:3.9.0]). 
+** It may therefore only be used if
 ** sqlite3_libversion_number() returns a value greater than or equal to
 ** 3009000.
 */
@@ -6243,13 +6260,13 @@
 ** interface is equivalent to sqlite3_create_module_v2() with a NULL
 ** destructor.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
   void *pClientData          /* Client data for xCreate/xConnect */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
@@ -6312,7 +6329,7 @@
 ** to declare the format (the names and datatypes of the columns) of
 ** the virtual tables they implement.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
 
 /*
 ** CAPI3REF: Overload A Function For A Virtual Table
@@ -6331,7 +6348,7 @@
 ** purpose is to be a placeholder function that can be overloaded
 ** by a [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
 
 /*
 ** The interface to the virtual-table mechanism defined above (back up
@@ -6430,7 +6447,7 @@
 ** To avoid a resource leak, every open [BLOB handle] should eventually
 ** be released by a call to [sqlite3_blob_close()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
   sqlite3*,
   const char *zDb,
   const char *zTable,
@@ -6463,7 +6480,7 @@
 **
 ** ^This function sets the database handle error code and message.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
 
 /*
 ** CAPI3REF: Close A BLOB Handle
@@ -6486,7 +6503,7 @@
 ** is passed a valid open blob handle, the values returned by the 
 ** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Return The Size Of An Open BLOB
@@ -6502,7 +6519,7 @@
 ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
 ** to this routine results in undefined and probably undesirable behavior.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Read Data From A BLOB Incrementally
@@ -6531,7 +6548,7 @@
 **
 ** See also: [sqlite3_blob_write()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
 
 /*
 ** CAPI3REF: Write Data Into A BLOB Incrementally
@@ -6573,7 +6590,7 @@
 **
 ** See also: [sqlite3_blob_read()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
 
 /*
 ** CAPI3REF: Virtual File System Objects
@@ -6604,9 +6621,9 @@
 ** ^(If the default VFS is unregistered, another VFS is chosen as
 ** the default.  The choice for the new VFS is arbitrary.)^
 */
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
 
 /*
 ** CAPI3REF: Mutexes
@@ -6722,11 +6739,11 @@
 **
 ** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
 
 /*
 ** CAPI3REF: Mutex Methods Object
@@ -6836,8 +6853,8 @@
 ** interface should also return 1 when given a NULL pointer.
 */
 #ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #endif
 
 /*
@@ -6856,7 +6873,7 @@
 #define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
 #define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_randomness() */
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
@@ -6877,7 +6894,7 @@
 ** ^If the [threading mode] is Single-thread or Multi-thread then this
 ** routine returns a NULL pointer.
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 
 /*
 ** CAPI3REF: Low-Level Control Of Database Files
@@ -6912,7 +6929,7 @@
 **
 ** See also: [SQLITE_FCNTL_LOCKSTATE]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
 
 /*
 ** CAPI3REF: Testing Interface
@@ -6931,7 +6948,7 @@
 ** Unlike most of the SQLite API, this function is not guaranteed to
 ** operate consistently from one release to the next.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
 
 /*
 ** CAPI3REF: Testing Interface Operation Codes
@@ -6960,6 +6977,7 @@
 #define SQLITE_TESTCTRL_SCRATCHMALLOC           17
 #define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD    19
 #define SQLITE_TESTCTRL_NEVER_CORRUPT           20
 #define SQLITE_TESTCTRL_VDBE_COVERAGE           21
 #define SQLITE_TESTCTRL_BYTEORDER               22
@@ -6994,8 +7012,8 @@
 **
 ** See also: [sqlite3_db_status()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
   int op,
   sqlite3_int64 *pCurrent,
   sqlite3_int64 *pHighwater,
@@ -7120,7 +7138,7 @@
 **
 ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for database connections
@@ -7263,7 +7281,7 @@
 **
 ** See also: [sqlite3_status()] and [sqlite3_db_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for prepared statements
@@ -7732,16 +7750,16 @@
 ** same time as another thread is invoking sqlite3_backup_step() it is
 ** possible that they return invalid values.
 */
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
   sqlite3 *pDest,                        /* Destination database handle */
   const char *zDestName,                 /* Destination database name */
   sqlite3 *pSource,                      /* Source database handle */
   const char *zSourceName                /* Source database name */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
 
 /*
 ** CAPI3REF: Unlock Notification
@@ -7858,7 +7876,7 @@
 ** the special "DROP TABLE/INDEX" case, the extended error code is just 
 ** SQLITE_LOCKED.)^
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
   sqlite3 *pBlocked,                          /* Waiting connection */
   void (*xNotify)(void **apArg, int nArg),    /* Callback function to invoke */
   void *pNotifyArg                            /* Argument to pass to xNotify */
@@ -7873,8 +7891,8 @@
 ** strings in a case-independent fashion, using the same definition of "case
 ** independence" that SQLite uses internally when comparing identifiers.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
 
 /*
 ** CAPI3REF: String Globbing
@@ -7891,7 +7909,7 @@
 **
 ** See also: [sqlite3_strlike()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
 
 /*
 ** CAPI3REF: String LIKE Matching
@@ -7914,7 +7932,7 @@
 **
 ** See also: [sqlite3_strglob()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
 
 /*
 ** CAPI3REF: Error Logging Interface
@@ -7937,7 +7955,7 @@
 ** a few hundred characters, it will be truncated to the length of the
 ** buffer.
 */
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
 
 /*
 ** CAPI3REF: Write-Ahead Log Commit Hook
@@ -7973,7 +7991,7 @@
 ** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
 ** overwrite any prior [sqlite3_wal_hook()] settings.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
   sqlite3*, 
   int(*)(void *,sqlite3*,const char*,int),
   void*
@@ -8008,7 +8026,7 @@
 ** is only necessary if the default setting is found to be suboptimal
 ** for a particular application.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 
 /*
 ** CAPI3REF: Checkpoint a database
@@ -8030,7 +8048,7 @@
 ** start a callback but which do not need the full power (and corresponding
 ** complication) of [sqlite3_wal_checkpoint_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 
 /*
 ** CAPI3REF: Checkpoint a database
@@ -8124,7 +8142,7 @@
 ** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
 ** from SQL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
   sqlite3 *db,                    /* Database handle */
   const char *zDb,                /* Name of attached database (or NULL) */
   int eMode,                      /* SQLITE_CHECKPOINT_* value */
@@ -8160,7 +8178,7 @@
 ** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
 ** may be added in the future.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Virtual Table Configuration Options
@@ -8213,7 +8231,7 @@
 ** of the SQL statement that triggered the call to the [xUpdate] method of the
 ** [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
 /*
 ** CAPI3REF: Conflict resolution modes
@@ -8318,7 +8336,7 @@
 **
 ** See also: [sqlite3_stmt_scanstatus_reset()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
   sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
   int idx,                  /* Index of loop to report on */
   int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
@@ -8334,7 +8352,7 @@
 ** This API is only available if the library is built with pre-processor
 ** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Flush caches to disk mid-transaction
@@ -8366,7 +8384,7 @@
 ** ^This function does not set the database handle error code or message
 ** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
 
 /*
 ** CAPI3REF: The pre-update hook.
@@ -8446,7 +8464,7 @@
 **
 ** See also:  [sqlite3_update_hook()]
 */
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_preupdate_hook(
+SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_preupdate_hook(
   sqlite3 *db,
   void(*xPreUpdate)(
     void *pCtx,                   /* Copy of third arg to preupdate_hook() */
@@ -8459,10 +8477,10 @@
   ),
   void*
 );
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_count(sqlite3 *);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_depth(sqlite3 *);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
 
 /*
 ** CAPI3REF: Low-level system error code
@@ -8474,7 +8492,7 @@
 ** called to get back the underlying "errno" that caused the problem, such
 ** as ENOSPC, EAUTH, EISDIR, and so forth.  
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_system_errno(sqlite3*);
+SQLITE_API int sqlite3_system_errno(sqlite3*);
 
 /*
 ** CAPI3REF: Database Snapshot
@@ -8524,7 +8542,7 @@
 ** The [sqlite3_snapshot_get()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
   sqlite3 *db,
   const char *zSchema,
   sqlite3_snapshot **ppSnapshot
@@ -8562,7 +8580,7 @@
 ** The [sqlite3_snapshot_open()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
   sqlite3 *db,
   const char *zSchema,
   sqlite3_snapshot *pSnapshot
@@ -8579,7 +8597,7 @@
 ** The [sqlite3_snapshot_free()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
 
 /*
 ** CAPI3REF: Compare the ages of two snapshot handles.
@@ -8603,7 +8621,7 @@
 ** snapshot than P2, zero if the two handles refer to the same database
 ** snapshot, and a positive value if P1 is a newer snapshot than P2.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_cmp(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
   sqlite3_snapshot *p1,
   sqlite3_snapshot *p2
 );
@@ -8661,7 +8679,7 @@
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
   int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
@@ -8687,7 +8705,7 @@
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
   sqlite3 *db,
   const char *zQueryFunc,
   int (*xQueryFunc)(sqlite3_rtree_query_info*),
@@ -8899,7 +8917,7 @@
 ** CAPI3REF: Set a table filter on a Session Object.
 **
 ** The second argument (xFilter) is the "filter callback". For changes to rows 
-** in tables that are not attached to the Session oject, the filter is called
+** in tables that are not attached to the Session object, the filter is called
 ** to determine whether changes to the table's rows should be tracked or not. 
 ** If xFilter returns 0, changes is not tracked. Note that once a table is 
 ** attached, xFilter will not be called again.
@@ -9165,7 +9183,7 @@
 ** [sqlite3changeset_invert()] functions, all changes within the changeset 
 ** that apply to a single table are grouped together. This means that when 
 ** an application iterates through a changeset using an iterator created by 
-** this function, all changes that relate to a single table are visted 
+** this function, all changes that relate to a single table are visited 
 ** consecutively. There is no chance that the iterator will visit a change 
 ** the applies to table X, then one for table Y, and then later on visit 
 ** another change for table X.
@@ -9252,7 +9270,7 @@
 ** 0x01 if the corresponding column is part of the tables primary key, or
 ** 0x00 if it is not.
 **
-** If argumet pnCol is not NULL, then *pnCol is set to the number of columns
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
 ** in the table.
 **
 ** If this function is called when the iterator does not point to a valid
@@ -9469,12 +9487,12 @@
 
 
 /*
-** Changegroup handle.
+** CAPI3REF: Changegroup Handle
 */
 typedef struct sqlite3_changegroup sqlite3_changegroup;
 
 /*
-** CAPI3REF: Combine two or more changesets into a single changeset.
+** CAPI3REF: Create A New Changegroup Object
 **
 ** An sqlite3_changegroup object is used to combine two or more changesets
 ** (or patchsets) into a single changeset (or patchset). A single changegroup
@@ -9511,6 +9529,8 @@
 int sqlite3changegroup_new(sqlite3_changegroup **pp);
 
 /*
+** CAPI3REF: Add A Changeset To A Changegroup
+**
 ** Add all changes within the changeset (or patchset) in buffer pData (size
 ** nData bytes) to the changegroup. 
 **
@@ -9525,7 +9545,7 @@
 ** apply to the same row as a change already present in the changegroup if
 ** the two rows have the same primary key.
 **
-** Changes to rows that that do not already appear in the changegroup are
+** Changes to rows that do not already appear in the changegroup are
 ** simply copied into it. Or, if both the new changeset and the changegroup
 ** contain changes that apply to a single row, the final contents of the
 ** changegroup depends on the type of each change, as follows:
@@ -9586,6 +9606,8 @@
 int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
 
 /*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+**
 ** Obtain a buffer containing a changeset (or patchset) representing the
 ** current contents of the changegroup. If the inputs to the changegroup
 ** were themselves changesets, the output is a changeset. Or, if the
@@ -9614,7 +9636,7 @@
 );
 
 /*
-** Delete a changegroup object.
+** CAPI3REF: Delete A Changegroup Object
 */
 void sqlite3changegroup_delete(sqlite3_changegroup*);
 
@@ -11391,9 +11413,9 @@
 #define TK_LIMIT                          129
 #define TK_WHERE                          130
 #define TK_INTO                           131
-#define TK_INTEGER                        132
-#define TK_FLOAT                          133
-#define TK_BLOB                           134
+#define TK_FLOAT                          132
+#define TK_BLOB                           133
+#define TK_INTEGER                        134
 #define TK_VARIABLE                       135
 #define TK_CASE                           136
 #define TK_WHEN                           137
@@ -11417,10 +11439,12 @@
 #define TK_UMINUS                         155
 #define TK_UPLUS                          156
 #define TK_REGISTER                       157
-#define TK_ASTERISK                       158
-#define TK_SPAN                           159
-#define TK_SPACE                          160
-#define TK_ILLEGAL                        161
+#define TK_VECTOR                         158
+#define TK_SELECT_COLUMN                  159
+#define TK_ASTERISK                       160
+#define TK_SPAN                           161
+#define TK_SPACE                          162
+#define TK_ILLEGAL                        163
 
 /* The token codes above must all fit in 8 bits */
 #define TKFLG_MASK           0xff  
@@ -11902,8 +11926,8 @@
   #define SQLITE_WSD const
   #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v)))
   #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config)
-SQLITE_API int SQLITE_STDCALL sqlite3_wsd_init(int N, int J);
-SQLITE_API void *SQLITE_STDCALL sqlite3_wsd_find(void *K, int L);
+SQLITE_API int sqlite3_wsd_init(int N, int J);
+SQLITE_API void *sqlite3_wsd_find(void *K, int L);
 #else
   #define SQLITE_WSD
   #define GLOBAL(t,v) v
@@ -12079,7 +12103,9 @@
 SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*);
 SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *));
 SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree);
+#ifndef SQLITE_OMIT_SHARED_CACHE
 SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock);
+#endif
 SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int);
 
 SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *);
@@ -12282,8 +12308,10 @@
 SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*);
 SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*);
 
+#ifndef SQLITE_OMIT_INCRBLOB
 SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
 SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *);
+#endif
 SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *);
 SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);
 SQLITE_PRIVATE int sqlite3BtreeCursorHasHint(BtCursor*, unsigned int mask);
@@ -12444,7 +12472,6 @@
   int nOp;                      /* Elements in aOp[] */
   int nMem;                     /* Number of memory cells required */
   int nCsr;                     /* Number of cursors required */
-  int nOnce;                    /* Number of OP_Once instructions */
   void *token;                  /* id that may be used to recursive triggers */
   SubProgram *pNext;            /* Next sub-program already visited */
 };
@@ -12561,13 +12588,13 @@
 #define OP_NotExists      33 /* synopsis: intkey=r[P3]                     */
 #define OP_IsNull         34 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
 #define OP_NotNull        35 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
-#define OP_Ne             36 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */
-#define OP_Eq             37 /* same as TK_EQ, synopsis: if r[P1]==r[P3] goto P2 */
-#define OP_Gt             38 /* same as TK_GT, synopsis: if r[P1]>r[P3] goto P2 */
-#define OP_Le             39 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */
-#define OP_Lt             40 /* same as TK_LT, synopsis: if r[P1]<r[P3] goto P2 */
-#define OP_Ge             41 /* same as TK_GE, synopsis: if r[P1]>=r[P3] goto P2 */
-#define OP_Last           42
+#define OP_Ne             36 /* same as TK_NE, synopsis: IF r[P3]!=r[P1]   */
+#define OP_Eq             37 /* same as TK_EQ, synopsis: IF r[P3]==r[P1]   */
+#define OP_Gt             38 /* same as TK_GT, synopsis: IF r[P3]>r[P1]    */
+#define OP_Le             39 /* same as TK_LE, synopsis: IF r[P3]<=r[P1]   */
+#define OP_Lt             40 /* same as TK_LT, synopsis: IF r[P3]<r[P1]    */
+#define OP_Ge             41 /* same as TK_GE, synopsis: IF r[P3]>=r[P1]   */
+#define OP_ElseNotEq      42 /* same as TK_ESCAPE                          */
 #define OP_BitAnd         43 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
 #define OP_BitOr          44 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
 #define OP_ShiftLeft      45 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */
@@ -12578,115 +12605,116 @@
 #define OP_Divide         50 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
 #define OP_Remainder      51 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
 #define OP_Concat         52 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
-#define OP_SorterSort     53
+#define OP_Last           53
 #define OP_BitNot         54 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
-#define OP_Sort           55
-#define OP_Rewind         56
-#define OP_IdxLE          57 /* synopsis: key=r[P3@P4]                     */
-#define OP_IdxGT          58 /* synopsis: key=r[P3@P4]                     */
-#define OP_IdxLT          59 /* synopsis: key=r[P3@P4]                     */
-#define OP_IdxGE          60 /* synopsis: key=r[P3@P4]                     */
-#define OP_RowSetRead     61 /* synopsis: r[P3]=rowset(P1)                 */
-#define OP_RowSetTest     62 /* synopsis: if r[P3] in rowset(P1) goto P2   */
-#define OP_Program        63
-#define OP_FkIfZero       64 /* synopsis: if fkctr[P1]==0 goto P2          */
-#define OP_IfPos          65 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
-#define OP_IfNotZero      66 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */
-#define OP_DecrJumpZero   67 /* synopsis: if (--r[P1])==0 goto P2          */
-#define OP_IncrVacuum     68
-#define OP_VNext          69
-#define OP_Init           70 /* synopsis: Start at P2                      */
-#define OP_Return         71
-#define OP_EndCoroutine   72
-#define OP_HaltIfNull     73 /* synopsis: if r[P3]=null halt               */
-#define OP_Halt           74
-#define OP_Integer        75 /* synopsis: r[P2]=P1                         */
-#define OP_Int64          76 /* synopsis: r[P2]=P4                         */
-#define OP_String         77 /* synopsis: r[P2]='P4' (len=P1)              */
-#define OP_Null           78 /* synopsis: r[P2..P3]=NULL                   */
-#define OP_SoftNull       79 /* synopsis: r[P1]=NULL                       */
-#define OP_Blob           80 /* synopsis: r[P2]=P4 (len=P1)                */
-#define OP_Variable       81 /* synopsis: r[P2]=parameter(P1,P4)           */
-#define OP_Move           82 /* synopsis: r[P2@P3]=r[P1@P3]                */
-#define OP_Copy           83 /* synopsis: r[P2@P3+1]=r[P1@P3+1]            */
-#define OP_SCopy          84 /* synopsis: r[P2]=r[P1]                      */
-#define OP_IntCopy        85 /* synopsis: r[P2]=r[P1]                      */
-#define OP_ResultRow      86 /* synopsis: output=r[P1@P2]                  */
-#define OP_CollSeq        87
-#define OP_Function0      88 /* synopsis: r[P3]=func(r[P2@P5])             */
-#define OP_Function       89 /* synopsis: r[P3]=func(r[P2@P5])             */
-#define OP_AddImm         90 /* synopsis: r[P1]=r[P1]+P2                   */
-#define OP_RealAffinity   91
-#define OP_Cast           92 /* synopsis: affinity(r[P1])                  */
-#define OP_Permutation    93
-#define OP_Compare        94 /* synopsis: r[P1@P3] <-> r[P2@P3]            */
-#define OP_Column         95 /* synopsis: r[P3]=PX                         */
-#define OP_Affinity       96 /* synopsis: affinity(r[P1@P2])               */
+#define OP_SorterSort     55
+#define OP_Sort           56
+#define OP_Rewind         57
+#define OP_IdxLE          58 /* synopsis: key=r[P3@P4]                     */
+#define OP_IdxGT          59 /* synopsis: key=r[P3@P4]                     */
+#define OP_IdxLT          60 /* synopsis: key=r[P3@P4]                     */
+#define OP_IdxGE          61 /* synopsis: key=r[P3@P4]                     */
+#define OP_RowSetRead     62 /* synopsis: r[P3]=rowset(P1)                 */
+#define OP_RowSetTest     63 /* synopsis: if r[P3] in rowset(P1) goto P2   */
+#define OP_Program        64
+#define OP_FkIfZero       65 /* synopsis: if fkctr[P1]==0 goto P2          */
+#define OP_IfPos          66 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
+#define OP_IfNotZero      67 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */
+#define OP_DecrJumpZero   68 /* synopsis: if (--r[P1])==0 goto P2          */
+#define OP_IncrVacuum     69
+#define OP_VNext          70
+#define OP_Init           71 /* synopsis: Start at P2                      */
+#define OP_Return         72
+#define OP_EndCoroutine   73
+#define OP_HaltIfNull     74 /* synopsis: if r[P3]=null halt               */
+#define OP_Halt           75
+#define OP_Integer        76 /* synopsis: r[P2]=P1                         */
+#define OP_Int64          77 /* synopsis: r[P2]=P4                         */
+#define OP_String         78 /* synopsis: r[P2]='P4' (len=P1)              */
+#define OP_Null           79 /* synopsis: r[P2..P3]=NULL                   */
+#define OP_SoftNull       80 /* synopsis: r[P1]=NULL                       */
+#define OP_Blob           81 /* synopsis: r[P2]=P4 (len=P1)                */
+#define OP_Variable       82 /* synopsis: r[P2]=parameter(P1,P4)           */
+#define OP_Move           83 /* synopsis: r[P2@P3]=r[P1@P3]                */
+#define OP_Copy           84 /* synopsis: r[P2@P3+1]=r[P1@P3+1]            */
+#define OP_SCopy          85 /* synopsis: r[P2]=r[P1]                      */
+#define OP_IntCopy        86 /* synopsis: r[P2]=r[P1]                      */
+#define OP_ResultRow      87 /* synopsis: output=r[P1@P2]                  */
+#define OP_CollSeq        88
+#define OP_Function0      89 /* synopsis: r[P3]=func(r[P2@P5])             */
+#define OP_Function       90 /* synopsis: r[P3]=func(r[P2@P5])             */
+#define OP_AddImm         91 /* synopsis: r[P1]=r[P1]+P2                   */
+#define OP_RealAffinity   92
+#define OP_Cast           93 /* synopsis: affinity(r[P1])                  */
+#define OP_Permutation    94
+#define OP_Compare        95 /* synopsis: r[P1@P3] <-> r[P2@P3]            */
+#define OP_Column         96 /* synopsis: r[P3]=PX                         */
 #define OP_String8        97 /* same as TK_STRING, synopsis: r[P2]='P4'    */
-#define OP_MakeRecord     98 /* synopsis: r[P3]=mkrec(r[P1@P2])            */
-#define OP_Count          99 /* synopsis: r[P2]=count()                    */
-#define OP_ReadCookie    100
-#define OP_SetCookie     101
-#define OP_ReopenIdx     102 /* synopsis: root=P2 iDb=P3                   */
-#define OP_OpenRead      103 /* synopsis: root=P2 iDb=P3                   */
-#define OP_OpenWrite     104 /* synopsis: root=P2 iDb=P3                   */
-#define OP_OpenAutoindex 105 /* synopsis: nColumn=P2                       */
-#define OP_OpenEphemeral 106 /* synopsis: nColumn=P2                       */
-#define OP_SorterOpen    107
-#define OP_SequenceTest  108 /* synopsis: if( cursor[P1].ctr++ ) pc = P2   */
-#define OP_OpenPseudo    109 /* synopsis: P3 columns in r[P2]              */
-#define OP_Close         110
-#define OP_ColumnsUsed   111
-#define OP_Sequence      112 /* synopsis: r[P2]=cursor[P1].ctr++           */
-#define OP_NewRowid      113 /* synopsis: r[P2]=rowid                      */
-#define OP_Insert        114 /* synopsis: intkey=r[P3] data=r[P2]          */
-#define OP_InsertInt     115 /* synopsis: intkey=P3 data=r[P2]             */
-#define OP_Delete        116
-#define OP_ResetCount    117
-#define OP_SorterCompare 118 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
-#define OP_SorterData    119 /* synopsis: r[P2]=data                       */
-#define OP_RowKey        120 /* synopsis: r[P2]=key                        */
-#define OP_RowData       121 /* synopsis: r[P2]=data                       */
-#define OP_Rowid         122 /* synopsis: r[P2]=rowid                      */
-#define OP_NullRow       123
-#define OP_SorterInsert  124
-#define OP_IdxInsert     125 /* synopsis: key=r[P2]                        */
-#define OP_IdxDelete     126 /* synopsis: key=r[P2@P3]                     */
-#define OP_Seek          127 /* synopsis: Move P3 to P1.rowid              */
-#define OP_IdxRowid      128 /* synopsis: r[P2]=rowid                      */
-#define OP_Destroy       129
-#define OP_Clear         130
-#define OP_ResetSorter   131
-#define OP_CreateIndex   132 /* synopsis: r[P2]=root iDb=P1                */
-#define OP_Real          133 /* same as TK_FLOAT, synopsis: r[P2]=P4       */
-#define OP_CreateTable   134 /* synopsis: r[P2]=root iDb=P1                */
-#define OP_ParseSchema   135
-#define OP_LoadAnalysis  136
-#define OP_DropTable     137
-#define OP_DropIndex     138
-#define OP_DropTrigger   139
-#define OP_IntegrityCk   140
-#define OP_RowSetAdd     141 /* synopsis: rowset(P1)=r[P2]                 */
-#define OP_Param         142
-#define OP_FkCounter     143 /* synopsis: fkctr[P1]+=P2                    */
-#define OP_MemMax        144 /* synopsis: r[P1]=max(r[P1],r[P2])           */
-#define OP_OffsetLimit   145 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */
-#define OP_AggStep0      146 /* synopsis: accum=r[P3] step(r[P2@P5])       */
-#define OP_AggStep       147 /* synopsis: accum=r[P3] step(r[P2@P5])       */
-#define OP_AggFinal      148 /* synopsis: accum=r[P1] N=P2                 */
-#define OP_Expire        149
-#define OP_TableLock     150 /* synopsis: iDb=P1 root=P2 write=P3          */
-#define OP_VBegin        151
-#define OP_VCreate       152
-#define OP_VDestroy      153
-#define OP_VOpen         154
-#define OP_VColumn       155 /* synopsis: r[P3]=vcolumn(P2)                */
-#define OP_VRename       156
-#define OP_Pagecount     157
-#define OP_MaxPgcnt      158
-#define OP_CursorHint    159
-#define OP_Noop          160
-#define OP_Explain       161
+#define OP_Affinity       98 /* synopsis: affinity(r[P1@P2])               */
+#define OP_MakeRecord     99 /* synopsis: r[P3]=mkrec(r[P1@P2])            */
+#define OP_Count         100 /* synopsis: r[P2]=count()                    */
+#define OP_ReadCookie    101
+#define OP_SetCookie     102
+#define OP_ReopenIdx     103 /* synopsis: root=P2 iDb=P3                   */
+#define OP_OpenRead      104 /* synopsis: root=P2 iDb=P3                   */
+#define OP_OpenWrite     105 /* synopsis: root=P2 iDb=P3                   */
+#define OP_OpenAutoindex 106 /* synopsis: nColumn=P2                       */
+#define OP_OpenEphemeral 107 /* synopsis: nColumn=P2                       */
+#define OP_SorterOpen    108
+#define OP_SequenceTest  109 /* synopsis: if( cursor[P1].ctr++ ) pc = P2   */
+#define OP_OpenPseudo    110 /* synopsis: P3 columns in r[P2]              */
+#define OP_Close         111
+#define OP_ColumnsUsed   112
+#define OP_Sequence      113 /* synopsis: r[P2]=cursor[P1].ctr++           */
+#define OP_NewRowid      114 /* synopsis: r[P2]=rowid                      */
+#define OP_Insert        115 /* synopsis: intkey=r[P3] data=r[P2]          */
+#define OP_InsertInt     116 /* synopsis: intkey=P3 data=r[P2]             */
+#define OP_Delete        117
+#define OP_ResetCount    118
+#define OP_SorterCompare 119 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
+#define OP_SorterData    120 /* synopsis: r[P2]=data                       */
+#define OP_RowKey        121 /* synopsis: r[P2]=key                        */
+#define OP_RowData       122 /* synopsis: r[P2]=data                       */
+#define OP_Rowid         123 /* synopsis: r[P2]=rowid                      */
+#define OP_NullRow       124
+#define OP_SorterInsert  125
+#define OP_IdxInsert     126 /* synopsis: key=r[P2]                        */
+#define OP_IdxDelete     127 /* synopsis: key=r[P2@P3]                     */
+#define OP_Seek          128 /* synopsis: Move P3 to P1.rowid              */
+#define OP_IdxRowid      129 /* synopsis: r[P2]=rowid                      */
+#define OP_Destroy       130
+#define OP_Clear         131
+#define OP_Real          132 /* same as TK_FLOAT, synopsis: r[P2]=P4       */
+#define OP_ResetSorter   133
+#define OP_CreateIndex   134 /* synopsis: r[P2]=root iDb=P1                */
+#define OP_CreateTable   135 /* synopsis: r[P2]=root iDb=P1                */
+#define OP_ParseSchema   136
+#define OP_LoadAnalysis  137
+#define OP_DropTable     138
+#define OP_DropIndex     139
+#define OP_DropTrigger   140
+#define OP_IntegrityCk   141
+#define OP_RowSetAdd     142 /* synopsis: rowset(P1)=r[P2]                 */
+#define OP_Param         143
+#define OP_FkCounter     144 /* synopsis: fkctr[P1]+=P2                    */
+#define OP_MemMax        145 /* synopsis: r[P1]=max(r[P1],r[P2])           */
+#define OP_OffsetLimit   146 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */
+#define OP_AggStep0      147 /* synopsis: accum=r[P3] step(r[P2@P5])       */
+#define OP_AggStep       148 /* synopsis: accum=r[P3] step(r[P2@P5])       */
+#define OP_AggFinal      149 /* synopsis: accum=r[P1] N=P2                 */
+#define OP_Expire        150
+#define OP_TableLock     151 /* synopsis: iDb=P1 root=P2 write=P3          */
+#define OP_VBegin        152
+#define OP_VCreate       153
+#define OP_VDestroy      154
+#define OP_VOpen         155
+#define OP_VColumn       156 /* synopsis: r[P3]=vcolumn(P2)                */
+#define OP_VRename       157
+#define OP_Pagecount     158
+#define OP_MaxPgcnt      159
+#define OP_CursorHint    160
+#define OP_Noop          161
+#define OP_Explain       162
 
 /* Properties such as "out2" or "jump" that are specified in
 ** comments following the "case" for each opcode in the vdbe.c
@@ -12706,28 +12734,28 @@
 /*  32 */ 0x09, 0x09, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\
 /*  40 */ 0x0b, 0x0b, 0x01, 0x26, 0x26, 0x26, 0x26, 0x26,\
 /*  48 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x01, 0x12, 0x01,\
-/*  56 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x23, 0x0b, 0x01,\
-/*  64 */ 0x01, 0x03, 0x03, 0x03, 0x01, 0x01, 0x01, 0x02,\
-/*  72 */ 0x02, 0x08, 0x00, 0x10, 0x10, 0x10, 0x10, 0x00,\
-/*  80 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\
-/*  88 */ 0x00, 0x00, 0x02, 0x02, 0x02, 0x00, 0x00, 0x00,\
-/*  96 */ 0x00, 0x10, 0x00, 0x10, 0x10, 0x00, 0x00, 0x00,\
+/*  56 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x23, 0x0b,\
+/*  64 */ 0x01, 0x01, 0x03, 0x03, 0x03, 0x01, 0x01, 0x01,\
+/*  72 */ 0x02, 0x02, 0x08, 0x00, 0x10, 0x10, 0x10, 0x10,\
+/*  80 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00,\
+/*  88 */ 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x00, 0x00,\
+/*  96 */ 0x00, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\
 /* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 112 */ 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 120 */ 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00, 0x00,\
-/* 128 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x10, 0x00,\
-/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x00,\
-/* 144 */ 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00,\
-/* 160 */ 0x00, 0x00,}
+/* 112 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 120 */ 0x00, 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00,\
+/* 128 */ 0x00, 0x10, 0x10, 0x00, 0x10, 0x00, 0x10, 0x10,\
+/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10,\
+/* 144 */ 0x00, 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10,\
+/* 160 */ 0x00, 0x00, 0x00,}
 
 /* The sqlite3P2Values() routine is able to run faster if it knows
 ** the value of the largest JUMP opcode.  The smaller the maximum
 ** JUMP opcode the better, so the mkopcodeh.tcl script that
 ** generated this include file strives to group all JUMP opcodes
 ** together near the beginning of the list.
 */
-#define SQLITE_MX_JUMP_OPCODE  70  /* Maximum JUMP opcode */
+#define SQLITE_MX_JUMP_OPCODE  71  /* Maximum JUMP opcode */
 
 /************** End of opcodes.h *********************************************/
 /************** Continuing where we left off in vdbe.h ***********************/
@@ -13696,7 +13724,7 @@
 ** databases may be attached.
 */
 struct Db {
-  char *zName;         /* Name of this database */
+  char *zDbSName;      /* Name of this database. (schema name, not filename) */
   Btree *pBt;          /* The B*Tree structure for this database file */
   u8 safety_level;     /* How aggressive at syncing data to disk */
   u8 bSyncSet;         /* True if "PRAGMA synchronous=N" has been run */
@@ -14332,6 +14360,7 @@
 ** operator is NULL.  It is added to certain comparison operators to
 ** prove that the operands are always NOT NULL.
 */
+#define SQLITE_KEEPNULL     0x08  /* Used by vector == or <> */
 #define SQLITE_JUMPIFNULL   0x10  /* jumps if either operand is NULL */
 #define SQLITE_STOREP2      0x20  /* Store result in reg[P2] rather than jump */
 #define SQLITE_NULLEQ       0x80  /* NULL=NULL */
@@ -14896,9 +14925,11 @@
   int iTable;            /* TK_COLUMN: cursor number of table holding column
                          ** TK_REGISTER: register number
                          ** TK_TRIGGER: 1 -> new, 0 -> old
-                         ** EP_Unlikely:  134217728 times likelihood */
+                         ** EP_Unlikely:  134217728 times likelihood
+                         ** TK_SELECT: 1st register of result vector */
   ynVar iColumn;         /* TK_COLUMN: column index.  -1 for rowid.
-                         ** TK_VARIABLE: variable number (always >= 1). */
+                         ** TK_VARIABLE: variable number (always >= 1).
+                         ** TK_SELECT_COLUMN: column of the result vector */
   i16 iAgg;              /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
   i16 iRightJoinTable;   /* If EP_FromJoin, the right table of the join */
   u8 op2;                /* TK_REGISTER: original value of Expr.op
@@ -14934,6 +14965,7 @@
 #define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */
 #define EP_Subquery  0x200000 /* Tree contains a TK_SELECT operator */
 #define EP_Alias     0x400000 /* Is an alias for a result set column */
+#define EP_Leaf      0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */
 
 /*
 ** Combinations of two or more EP_* flags
@@ -15379,7 +15411,7 @@
 */
 struct SelectDest {
   u8 eDest;            /* How to dispose of the results.  On of SRT_* above. */
-  char affSdst;        /* Affinity used when eDest==SRT_Set */
+  char *zAffSdst;      /* Affinity used when eDest==SRT_Set */
   int iSDParm;         /* A parameter used by the eDest disposal method */
   int iSdst;           /* Base register where results are written */
   int nSdst;           /* Number of registers allocated */
@@ -15485,36 +15517,23 @@
   u8 okConstFactor;    /* OK to factor out constants */
   u8 disableLookaside; /* Number of times lookaside has been disabled */
   u8 nColCache;        /* Number of entries in aColCache[] */
-  int aTempReg[8];     /* Holding area for temporary registers */
   int nRangeReg;       /* Size of the temporary register block */
   int iRangeReg;       /* First register in temporary register block */
   int nErr;            /* Number of errors seen */
   int nTab;            /* Number of previously allocated VDBE cursors */
   int nMem;            /* Number of memory cells used so far */
-  int nSet;            /* Number of sets used so far */
-  int nOnce;           /* Number of OP_Once instructions so far */
   int nOpAlloc;        /* Number of slots allocated for Vdbe.aOp[] */
   int szOpAlloc;       /* Bytes of memory space allocated for Vdbe.aOp[] */
-  int iFixedOp;        /* Never back out opcodes iFixedOp-1 or earlier */
   int ckBase;          /* Base register of data during check constraints */
   int iSelfTab;        /* Table of an index whose exprs are being coded */
   int iCacheLevel;     /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
   int iCacheCnt;       /* Counter used to generate aColCache[].lru values */
   int nLabel;          /* Number of labels used */
   int *aLabel;         /* Space to hold the labels */
-  struct yColCache {
-    int iTable;           /* Table cursor number */
-    i16 iColumn;          /* Table column number */
-    u8 tempReg;           /* iReg is a temp register that needs to be freed */
-    int iLevel;           /* Nesting level */
-    int iReg;             /* Reg with value of this column. 0 means none. */
-    int lru;              /* Least recently used entry has the smallest value */
-  } aColCache[SQLITE_N_COLCACHE];  /* One for each column cache entry */
   ExprList *pConstExpr;/* Constant expressions */
   Token constraintName;/* Name of the constraint currently being parsed */
   yDbMask writeMask;   /* Start a write transaction on these databases */
   yDbMask cookieMask;  /* Bitmask of schema verified databases */
-  int cookieValue[SQLITE_MAX_ATTACHED+2];  /* Values of cookies to verify */
   int regRowid;        /* Register holding rowid of CREATE TABLE entry */
   int regRoot;         /* Register holding root page number for new objects */
   int nMaxArg;         /* Max args passed to user function by sub-program */
@@ -15527,8 +15546,6 @@
   TableLock *aTableLock; /* Required table locks for shared-cache mode */
 #endif
   AutoincInfo *pAinc;  /* Information about AUTOINCREMENT counters */
-
-  /* Information used while coding trigger programs. */
   Parse *pToplevel;    /* Parse structure for main program (or NULL) */
   Table *pTriggerTab;  /* Table triggers are being coded for */
   int addrCrTab;       /* Address of OP_CreateTable opcode on CREATE TABLE */
@@ -15539,6 +15556,25 @@
   u8 eOrconf;          /* Default ON CONFLICT policy for trigger steps */
   u8 disableTriggers;  /* True to disable triggers */
 
+  /**************************************************************************
+  ** Fields above must be initialized to zero.  The fields that follow,
+  ** down to the beginning of the recursive section, do not need to be
+  ** initialized as they will be set before being used.  The boundary is
+  ** determined by offsetof(Parse,aColCache).
+  **************************************************************************/
+
+  struct yColCache {
+    int iTable;           /* Table cursor number */
+    i16 iColumn;          /* Table column number */
+    u8 tempReg;           /* iReg is a temp register that needs to be freed */
+    int iLevel;           /* Nesting level */
+    int iReg;             /* Reg with value of this column. 0 means none. */
+    int lru;              /* Least recently used entry has the smallest value */
+  } aColCache[SQLITE_N_COLCACHE];  /* One for each column cache entry */
+  int aTempReg[8];        /* Holding area for temporary registers */
+  Token sNameToken;       /* Token with unqualified schema object name */
+  Token sLastToken;       /* The last token parsed */
+
   /************************************************************************
   ** Above is constant between recursions.  Below is reset before and after
   ** each recursion.  The boundary between these two regions is determined
@@ -15554,7 +15590,6 @@
   u8 declareVtab;           /* True if inside sqlite3_declare_vtab() */
   int nVtabLock;            /* Number of virtual tables to lock */
 #endif
-  int nAlias;               /* Number of aliased result set columns */
   int nHeight;              /* Expression tree height of current sub-select */
 #ifndef SQLITE_OMIT_EXPLAIN
   int iSelectId;            /* ID of current select for EXPLAIN output */
@@ -15566,8 +15601,6 @@
   Table *pNewTable;         /* A table being constructed by CREATE TABLE */
   Trigger *pNewTrigger;     /* Trigger under construct by a CREATE TRIGGER */
   const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
-  Token sNameToken;         /* Token with unqualified schema object name */
-  Token sLastToken;         /* The last token parsed */
 #ifndef SQLITE_OMIT_VIRTUALTABLE
   Token sArg;               /* Complete text of a module argument */
   Table **apVtabLock;       /* Pointer to virtual tables needing locking */
@@ -15579,6 +15612,14 @@
 };
 
 /*
+** Sizes and pointers of various parts of the Parse object.
+*/
+#define PARSE_HDR_SZ offsetof(Parse,aColCache) /* Recursive part w/o aColCache*/
+#define PARSE_RECURSE_SZ offsetof(Parse,nVar)  /* Recursive part */
+#define PARSE_TAIL_SZ (sizeof(Parse)-PARSE_RECURSE_SZ) /* Non-recursive part */
+#define PARSE_TAIL(X) (((char*)(X))+PARSE_RECURSE_SZ)  /* Pointer to tail */
+
+/*
 ** Return true if currently inside an sqlite3_declare_vtab() call.
 */
 #ifdef SQLITE_OMIT_VIRTUALTABLE
@@ -15826,6 +15867,7 @@
   int (*xTestCallback)(int);        /* Invoked by sqlite3FaultSim() */
 #endif
   int bLocaltimeFault;              /* True to fail localtime() calls */
+  int iOnceResetThreshold;          /* When to reset OP_Once counters */
 };
 
 /*
@@ -16111,6 +16153,7 @@
 
 #if defined(SQLITE_DEBUG)
 SQLITE_PRIVATE   void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
+SQLITE_PRIVATE   void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*);
 SQLITE_PRIVATE   void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
 SQLITE_PRIVATE   void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
 SQLITE_PRIVATE   void sqlite3TreeViewWith(TreeView*, const With*, u8);
@@ -16139,9 +16182,10 @@
 SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse*, Expr*, Select*);
 SQLITE_PRIVATE Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
 SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
-SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*);
+SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*, u32);
 SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3*, Expr*);
 SQLITE_PRIVATE ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
+SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*);
 SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList*,int);
 SQLITE_PRIVATE void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
 SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
@@ -16177,7 +16221,6 @@
 SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*,
                     sqlite3_vfs**,char**,char **);
 SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
-SQLITE_PRIVATE int sqlite3CodeOnce(Parse *);
 
 #ifdef SQLITE_OMIT_BUILTIN_TEST
 # define sqlite3FaultSim(X) SQLITE_OK
@@ -16300,8 +16343,8 @@
 SQLITE_PRIVATE Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
 SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
 SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
-SQLITE_PRIVATE void sqlite3Vacuum(Parse*);
-SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*);
+SQLITE_PRIVATE void sqlite3Vacuum(Parse*,Token*);
+SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*, int);
 SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3*, Token*);
 SQLITE_PRIVATE int sqlite3ExprCompare(Expr*, Expr*, int);
 SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*, int);
@@ -16477,6 +16520,7 @@
 SQLITE_PRIVATE void sqlite3TableAffinity(Vdbe*, Table*, int);
 SQLITE_PRIVATE char sqlite3CompareAffinity(Expr *pExpr, char aff2);
 SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
+SQLITE_PRIVATE char sqlite3TableColumnAffinity(Table*,int);
 SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr);
 SQLITE_PRIVATE int sqlite3Atoi64(const char*, i64*, int, u8);
 SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char*, i64*);
@@ -16542,7 +16586,7 @@
 SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *, int *);
 SQLITE_PRIVATE void sqlite3NestedParse(Parse*, const char*, ...);
 SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*);
-SQLITE_PRIVATE int sqlite3CodeSubselect(Parse *, Expr *, int, int);
+SQLITE_PRIVATE int sqlite3CodeSubselect(Parse*, Expr *, int, int);
 SQLITE_PRIVATE void sqlite3SelectPrep(Parse*, Select*, NameContext*);
 SQLITE_PRIVATE void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
 SQLITE_PRIVATE int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
@@ -16597,12 +16641,20 @@
 SQLITE_PRIVATE void sqlite3BackupRestart(sqlite3_backup *);
 SQLITE_PRIVATE void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
 
+#ifndef SQLITE_OMIT_SUBQUERY
+SQLITE_PRIVATE int sqlite3ExprCheckIN(Parse*, Expr*);
+#else
+# define sqlite3ExprCheckIN(x,y) SQLITE_OK
+#endif
+
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
 SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void);
-SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*);
+SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(
+    Parse*,Index*,UnpackedRecord**,Expr*,int,int,int*);
 SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**);
 SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord*);
 SQLITE_PRIVATE int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**);
+SQLITE_PRIVATE char sqlite3IndexColumnAffinity(sqlite3*, Index*, int);
 #endif
 
 /*
@@ -16755,7 +16807,7 @@
 #define IN_INDEX_NOOP_OK     0x0001  /* OK to return IN_INDEX_NOOP */
 #define IN_INDEX_MEMBERSHIP  0x0002  /* IN operator used for membership test */
 #define IN_INDEX_LOOP        0x0004  /* IN operator used as a loop */
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
+SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*);
 
 SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
 SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
@@ -16860,6 +16912,11 @@
 SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3*);
 #endif
 
+SQLITE_PRIVATE int sqlite3ExprVectorSize(Expr *pExpr);
+SQLITE_PRIVATE int sqlite3ExprIsVector(Expr *pExpr);
+SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr*, int);
+SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(Parse*,Expr*,int);
+
 #endif /* SQLITEINT_H */
 
 /************** End of sqliteInt.h *******************************************/
@@ -16945,16 +17002,13 @@
 **
 **   (x & ~(map[x]&0x20))
 **
-** Standard function tolower() is implemented using the sqlite3UpperToLower[]
+** The equivalent of tolower() is implemented using the sqlite3UpperToLower[]
 ** array. tolower() is used more often than toupper() by SQLite.
 **
-** Bit 0x40 is set if the character non-alphanumeric and can be used in an 
+** Bit 0x40 is set if the character is non-alphanumeric and can be used in an 
 ** SQLite identifier.  Identifiers are alphanumerics, "_", "$", and any
 ** non-ASCII UTF character. Hence the test for whether or not a character is
 ** part of an identifier is 0x46.
-**
-** SQLite's versions are identical to the standard versions assuming a
-** locale of "C". They are implemented as macros in sqliteInt.h.
 */
 #ifdef SQLITE_ASCII
 SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[256] = {
@@ -17027,7 +17081,7 @@
 #endif
 
 /* Statement journals spill to disk when their size exceeds the following
-** threashold (in bytes). 0 means that statement journals are created and
+** threshold (in bytes). 0 means that statement journals are created and
 ** written to disk immediately (the default behavior for SQLite versions
 ** before 3.12.0).  -1 means always keep the entire statement journal in
 ** memory.  (The statement journal is also always held entirely in memory
@@ -17091,7 +17145,8 @@
 #ifndef SQLITE_OMIT_BUILTIN_TEST
    0,                         /* xTestCallback */
 #endif
-   0                          /* bLocaltimeFault */
+   0,                         /* bLocaltimeFault */
+   0x7ffffffe                 /* iOnceResetThreshold */
 };
 
 /*
@@ -17114,7 +17169,7 @@
 ** The value of the "pending" byte must be 0x40000000 (1 byte past the
 ** 1-gibabyte boundary) in a compatible database.  SQLite never uses
 ** the database page that contains the pending byte.  It never attempts
-** to read or write that page.  The pending byte page is set assign
+** to read or write that page.  The pending byte page is set aside
 ** for use by the VFS layers as space for managing file locks.
 **
 ** During testing, it is often desirable to move the pending byte to
@@ -17563,7 +17618,7 @@
 ** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
 ** is not required for a match.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName){
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName){
   int i, n;
 
 #if SQLITE_ENABLE_API_ARMOR
@@ -17591,7 +17646,7 @@
 ** Return the N-th compile-time option string.  If N is out of range,
 ** return a NULL pointer.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N){
+SQLITE_API const char *sqlite3_compileoption_get(int N){
   if( N>=0 && N<ArraySize(azCompileOpt) ){
     return azCompileOpt[N];
   }
@@ -17674,9 +17729,6 @@
 /* Opaque type used by code in vdbesort.c */
 typedef struct VdbeSorter VdbeSorter;
 
-/* Opaque type used by the explainer */
-typedef struct Explain Explain;
-
 /* Elements of the linked list at Vdbe.pAuxData */
 typedef struct AuxData AuxData;
 
@@ -17751,7 +17803,13 @@
   ** aType[] and nField+1 array slots for aOffset[] */
 };
 
+
 /*
+** A value for VdbeCursor.cacheStatus that means the cache is always invalid.
+*/
+#define CACHE_STALE 0
+
+/*
 ** When a sub-program is executed (OP_Program), a structure of this type
 ** is allocated to store the current value of the program counter, as
 ** well as the current memory cell array and various other frame specific
@@ -17779,7 +17837,6 @@
   Op *aOp;                /* Program instructions for parent frame */
   i64 *anExec;            /* Event counters from parent frame */
   Mem *aMem;              /* Array of memory cells for parent frame */
-  u8 *aOnceFlag;          /* Array of OP_Once flags for parent frame */
   VdbeCursor **apCsr;     /* Array of Vdbe cursors for parent frame */
   void *token;            /* Copy of SubProgram.token */
   i64 lastRowid;          /* Last insert rowid (sqlite3.lastRowid) */
@@ -17788,7 +17845,6 @@
   int pc;                 /* Program Counter in parent (calling) frame */
   int nOp;                /* Size of aOp array */
   int nMem;               /* Number of entries in aMem */
-  int nOnceFlag;          /* Number of entries in aOnceFlag */
   int nChildMem;          /* Number of memory cells for child frame */
   int nChildCsr;          /* Number of cursors for child frame */
   int nChange;            /* Statement changes (Vdbe.nChange)     */
@@ -17798,11 +17854,6 @@
 #define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))])
 
 /*
-** A value for VdbeCursor.cacheValid that means the cache is always invalid.
-*/
-#define CACHE_STALE 0
-
-/*
 ** Internally, the vdbe manipulates nearly all SQL values as Mem
 ** structures. Each Mem struct may cache multiple representations (string,
 ** integer etc.) of the same value.
@@ -17942,18 +17993,6 @@
   sqlite3_value *argv[1]; /* Argument set */
 };
 
-/*
-** An Explain object accumulates indented output which is helpful
-** in describing recursive data structures.
-*/
-struct Explain {
-  Vdbe *pVdbe;       /* Attach the explanation to this Vdbe */
-  StrAccum str;      /* The string being accumulated */
-  int nIndent;       /* Number of elements in aIndent */
-  u16 aIndent[100];  /* Levels of indentation */
-  char zBase[100];   /* Initial space */
-};
-
 /* A bitfield type for use inside of structures.  Always follow with :N where
 ** N is the number of bits.
 */
@@ -17978,62 +18017,64 @@
 */
 struct Vdbe {
   sqlite3 *db;            /* The database connection that owns this statement */
+  Vdbe *pPrev,*pNext;     /* Linked list of VDBEs with the same Vdbe.db */
+  Parse *pParse;          /* Parsing context used to create this Vdbe */
+  ynVar nVar;             /* Number of entries in aVar[] */
+  ynVar nzVar;            /* Number of entries in azVar[] */
+  u32 magic;              /* Magic number for sanity checking */
+  int nMem;               /* Number of memory locations currently allocated */
+  int nCursor;            /* Number of slots in apCsr[] */
+  u32 cacheCtr;           /* VdbeCursor row cache generation counter */
+  int pc;                 /* The program counter */
+  int rc;                 /* Value to return */
+  int nChange;            /* Number of db changes made since last reset */
+  int iStatement;         /* Statement number (or 0 if has not opened stmt) */
+  i64 iCurrentTime;       /* Value of julianday('now') for this statement */
+  i64 nFkConstraint;      /* Number of imm. FK constraints this VM */
+  i64 nStmtDefCons;       /* Number of def. constraints when stmt started */
+  i64 nStmtDefImmCons;    /* Number of def. imm constraints when stmt started */
+
+  /* When allocating a new Vdbe object, all of the fields below should be
+  ** initialized to zero or NULL */
+
   Op *aOp;                /* Space to hold the virtual machine's program */
   Mem *aMem;              /* The memory locations */
   Mem **apArg;            /* Arguments to currently executing user function */
   Mem *aColName;          /* Column names to return */
   Mem *pResultSet;        /* Pointer to an array of results */
-  Parse *pParse;          /* Parsing context used to create this Vdbe */
-  int nMem;               /* Number of memory locations currently allocated */
-  int nOp;                /* Number of instructions in the program */
-  int nCursor;            /* Number of slots in apCsr[] */
-  u32 magic;              /* Magic number for sanity checking */
   char *zErrMsg;          /* Error message written here */
-  Vdbe *pPrev,*pNext;     /* Linked list of VDBEs with the same Vdbe.db */
   VdbeCursor **apCsr;     /* One element of this array for each open cursor */
   Mem *aVar;              /* Values for the OP_Variable opcode. */
   char **azVar;           /* Name of variables */
-  ynVar nVar;             /* Number of entries in aVar[] */
-  ynVar nzVar;            /* Number of entries in azVar[] */
-  u32 cacheCtr;           /* VdbeCursor row cache generation counter */
-  int pc;                 /* The program counter */
-  int rc;                 /* Value to return */
+#ifndef SQLITE_OMIT_TRACE
+  i64 startTime;          /* Time when query started - used for profiling */
+#endif
+  int nOp;                /* Number of instructions in the program */
 #ifdef SQLITE_DEBUG
   int rcApp;              /* errcode set by sqlite3_result_error_code() */
 #endif
   u16 nResColumn;         /* Number of columns in one row of the result set */
   u8 errorAction;         /* Recovery action to do in case of an error */
+  u8 minWriteFileFormat;  /* Minimum file format for writable database files */
   bft expired:1;          /* True if the VM needs to be recompiled */
   bft doingRerun:1;       /* True if rerunning after an auto-reprepare */
-  u8 minWriteFileFormat;  /* Minimum file format for writable database files */
   bft explain:2;          /* True if EXPLAIN present on SQL command */
   bft changeCntOn:1;      /* True to update the change-counter */
   bft runOnlyOnce:1;      /* Automatically expire on reset */
   bft usesStmtJournal:1;  /* True if uses a statement journal */
   bft readOnly:1;         /* True for statements that do not write */
   bft bIsReader:1;        /* True for statements that read */
   bft isPrepareV2:1;      /* True if prepared with prepare_v2() */
-  int nChange;            /* Number of db changes made since last reset */
   yDbMask btreeMask;      /* Bitmask of db->aDb[] entries referenced */
   yDbMask lockMask;       /* Subset of btreeMask that requires a lock */
-  int iStatement;         /* Statement number (or 0 if has not opened stmt) */
   u32 aCounter[5];        /* Counters used by sqlite3_stmt_status() */
-#ifndef SQLITE_OMIT_TRACE
-  i64 startTime;          /* Time when query started - used for profiling */
-#endif
-  i64 iCurrentTime;       /* Value of julianday('now') for this statement */
-  i64 nFkConstraint;      /* Number of imm. FK constraints this VM */
-  i64 nStmtDefCons;       /* Number of def. constraints when stmt started */
-  i64 nStmtDefImmCons;    /* Number of def. imm constraints when stmt started */
   char *zSql;             /* Text of the SQL statement that generated this */
   void *pFree;            /* Free this when deleting the vdbe */
   VdbeFrame *pFrame;      /* Parent frame */
   VdbeFrame *pDelFrame;   /* List of frame objects to free on VM reset */
   int nFrame;             /* Number of frames in pFrame list */
   u32 expmask;            /* Binding to these vars invalidates VM */
   SubProgram *pProgram;   /* Linked list of all sub-programs used by VM */
-  int nOnceFlag;          /* Size of array aOnceFlag[] */
-  u8 *aOnceFlag;          /* Flags for OP_Once */
   AuxData *pAuxData;      /* Linked list of auxdata allocations */
 #ifdef SQLITE_ENABLE_STMT_SCANSTATUS
   i64 *anExec;            /* Number of times each op has been executed */
@@ -18045,10 +18086,11 @@
 /*
 ** The following are allowed values for Vdbe.magic
 */
-#define VDBE_MAGIC_INIT     0x26bceaa5    /* Building a VDBE program */
-#define VDBE_MAGIC_RUN      0xbdf20da3    /* VDBE is ready to execute */
-#define VDBE_MAGIC_HALT     0x519c2973    /* VDBE has completed execution */
-#define VDBE_MAGIC_DEAD     0xb606c3c8    /* The VDBE has been deallocated */
+#define VDBE_MAGIC_INIT     0x16bceaa5    /* Building a VDBE program */
+#define VDBE_MAGIC_RUN      0x2df20da3    /* VDBE is ready to execute */
+#define VDBE_MAGIC_HALT     0x319c2973    /* VDBE has completed execution */
+#define VDBE_MAGIC_RESET    0x48fa9f76    /* Reset and ready to run again */
+#define VDBE_MAGIC_DEAD     0x5606c3c8    /* The VDBE has been deallocated */
 
 /*
 ** Structure used to store the context required by the 
@@ -18301,7 +18343,7 @@
 /*
 ** Query status information.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status64(
   int op,
   sqlite3_int64 *pCurrent,
   sqlite3_int64 *pHighwater,
@@ -18326,7 +18368,7 @@
   (void)pMutex;  /* Prevent warning when SQLITE_THREADSAFE=0 */
   return SQLITE_OK;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
   sqlite3_int64 iCur = 0, iHwtr = 0;
   int rc;
 #ifdef SQLITE_ENABLE_API_ARMOR
@@ -18343,7 +18385,7 @@
 /*
 ** Query status information for a single database connection
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(
+SQLITE_API int sqlite3_db_status(
   sqlite3 *db,          /* The database connection whose status is desired */
   int op,               /* Status verb */
   int *pCurrent,        /* Write current value here */
@@ -20020,7 +20062,7 @@
 ** Locate a VFS by name.  If no name is given, simply return the
 ** first VFS on the list.
 */
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfs){
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfs){
   sqlite3_vfs *pVfs = 0;
 #if SQLITE_THREADSAFE
   sqlite3_mutex *mutex;
@@ -20066,7 +20108,7 @@
 ** VFS multiple times.  The new VFS becomes the default if makeDflt is
 ** true.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
   MUTEX_LOGIC(sqlite3_mutex *mutex;)
 #ifndef SQLITE_OMIT_AUTOINIT
   int rc = sqlite3_initialize();
@@ -20094,7 +20136,7 @@
 /*
 ** Unregister a VFS so that it is no longer accessible.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
 #if SQLITE_THREADSAFE
   sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
 #endif
@@ -22445,7 +22487,7 @@
 /*
 ** Retrieve a pointer to a static mutex or allocate a new dynamic one.
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int id){
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int id){
 #ifndef SQLITE_OMIT_AUTOINIT
   if( id<=SQLITE_MUTEX_RECURSIVE && sqlite3_initialize() ) return 0;
   if( id>SQLITE_MUTEX_RECURSIVE && sqlite3MutexInit() ) return 0;
@@ -22466,7 +22508,7 @@
 /*
 ** Free a dynamic mutex.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex *p){
   if( p ){
     assert( sqlite3GlobalConfig.mutex.xMutexFree );
     sqlite3GlobalConfig.mutex.xMutexFree(p);
@@ -22477,7 +22519,7 @@
 ** Obtain the mutex p. If some other thread already has the mutex, block
 ** until it can be obtained.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex *p){
   if( p ){
     assert( sqlite3GlobalConfig.mutex.xMutexEnter );
     sqlite3GlobalConfig.mutex.xMutexEnter(p);
@@ -22488,7 +22530,7 @@
 ** Obtain the mutex p. If successful, return SQLITE_OK. Otherwise, if another
 ** thread holds the mutex and it cannot be obtained, return SQLITE_BUSY.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex *p){
   int rc = SQLITE_OK;
   if( p ){
     assert( sqlite3GlobalConfig.mutex.xMutexTry );
@@ -22503,7 +22545,7 @@
 ** is not currently entered. If a NULL pointer is passed as an argument
 ** this function is a no-op.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex *p){
   if( p ){
     assert( sqlite3GlobalConfig.mutex.xMutexLeave );
     sqlite3GlobalConfig.mutex.xMutexLeave(p);
@@ -22515,11 +22557,11 @@
 ** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
 ** intended for use inside assert() statements.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex *p){
   assert( p==0 || sqlite3GlobalConfig.mutex.xMutexHeld );
   return p==0 || sqlite3GlobalConfig.mutex.xMutexHeld(p);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex *p){
   assert( p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld );
   return p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld(p);
 }
@@ -23551,8 +23593,8 @@
 */
 static LONG SQLITE_WIN32_VOLATILE winMutex_lock = 0;
 
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_is_nt(void); /* os_win.c */
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
+SQLITE_API int sqlite3_win32_is_nt(void); /* os_win.c */
+SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
 
 static int winMutexInit(void){
   /* The first to increment to 1 does actual initialization */
@@ -23852,7 +23894,7 @@
 ** held by SQLite. An example of non-essential memory is memory used to
 ** cache database pages that are not currently in use.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int n){
+SQLITE_API int sqlite3_release_memory(int n){
 #ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
   return sqlite3PcacheReleaseMemory(n);
 #else
@@ -23911,7 +23953,7 @@
 ** that was invoked when memory usage grew too large.  Now it is a
 ** no-op.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_memory_alarm(
+SQLITE_API int sqlite3_memory_alarm(
   void(*xCallback)(void *pArg, sqlite3_int64 used,int N),
   void *pArg,
   sqlite3_int64 iThreshold
@@ -23927,7 +23969,7 @@
 ** Set the soft heap-size limit for the library. Passing a zero or 
 ** negative value indicates no limit.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 n){
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 n){
   sqlite3_int64 priorLimit;
   sqlite3_int64 excess;
   sqlite3_int64 nUsed;
@@ -23949,7 +23991,7 @@
   if( excess>0 ) sqlite3_release_memory((int)(excess & 0x7fffffff));
   return priorLimit;
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_soft_heap_limit(int n){
+SQLITE_API void sqlite3_soft_heap_limit(int n){
   if( n<0 ) n = 0;
   sqlite3_soft_heap_limit64(n);
 }
@@ -24018,7 +24060,7 @@
 /*
 ** Return the amount of memory currently checked out.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void){
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void){
   sqlite3_int64 res, mx;
   sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, 0);
   return res;
@@ -24029,7 +24071,7 @@
 ** checked out since either the beginning of this process
 ** or since the most recent reset.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag){
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag){
   sqlite3_int64 res, mx;
   sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, resetFlag);
   return mx;
@@ -24109,13 +24151,13 @@
 ** First make sure the memory subsystem is initialized, then do the
 ** allocation.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int n){
+SQLITE_API void *sqlite3_malloc(int n){
 #ifndef SQLITE_OMIT_AUTOINIT
   if( sqlite3_initialize() ) return 0;
 #endif
   return n<=0 ? 0 : sqlite3Malloc(n);
 }
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64 n){
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64 n){
 #ifndef SQLITE_OMIT_AUTOINIT
   if( sqlite3_initialize() ) return 0;
 #endif
@@ -24258,7 +24300,7 @@
     return db->lookaside.sz;
   }
 }
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void *p){
+SQLITE_API sqlite3_uint64 sqlite3_msize(void *p){
   assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
   assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
   return p ? sqlite3GlobalConfig.m.xSize(p) : 0;
@@ -24267,7 +24309,7 @@
 /*
 ** Free memory previously obtained from sqlite3Malloc().
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void *p){
+SQLITE_API void sqlite3_free(void *p){
   if( p==0 ) return;  /* IMP: R-49053-54554 */
   assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
   assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
@@ -24376,14 +24418,14 @@
 ** The public interface to sqlite3Realloc.  Make sure that the memory
 ** subsystem is initialized prior to invoking sqliteRealloc.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void *pOld, int n){
+SQLITE_API void *sqlite3_realloc(void *pOld, int n){
 #ifndef SQLITE_OMIT_AUTOINIT
   if( sqlite3_initialize() ) return 0;
 #endif
   if( n<0 ) n = 0;  /* IMP: R-26507-47431 */
   return sqlite3Realloc(pOld, n);
 }
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
+SQLITE_API void *sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
 #ifndef SQLITE_OMIT_AUTOINIT
   if( sqlite3_initialize() ) return 0;
 #endif
@@ -25610,7 +25652,7 @@
 ** Print into memory obtained from sqlite3_malloc().  Omit the internal
 ** %-conversion extensions.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char *zFormat, va_list ap){
+SQLITE_API char *sqlite3_vmprintf(const char *zFormat, va_list ap){
   char *z;
   char zBase[SQLITE_PRINT_BUF_SIZE];
   StrAccum acc;
@@ -25634,7 +25676,7 @@
 ** Print into memory obtained from sqlite3_malloc()().  Omit the internal
 ** %-conversion extensions.
 */
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char *zFormat, ...){
+SQLITE_API char *sqlite3_mprintf(const char *zFormat, ...){
   va_list ap;
   char *z;
 #ifndef SQLITE_OMIT_AUTOINIT
@@ -25659,7 +25701,7 @@
 **
 ** sqlite3_vsnprintf() is the varargs version.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
+SQLITE_API char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
   StrAccum acc;
   if( n<=0 ) return zBuf;
 #ifdef SQLITE_ENABLE_API_ARMOR
@@ -25673,7 +25715,7 @@
   sqlite3VXPrintf(&acc, zFormat, ap);
   return sqlite3StrAccumFinish(&acc);
 }
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
+SQLITE_API char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
   char *z;
   va_list ap;
   va_start(ap,zFormat);
@@ -25709,7 +25751,7 @@
 /*
 ** Format and write a message to the log if logging is enabled.
 */
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...){
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...){
   va_list ap;                             /* Vararg list */
   if( sqlite3GlobalConfig.xLog ){
     va_start(ap, zFormat);
@@ -25874,7 +25916,7 @@
 
 
 /*
-** Generate a human-readable description of a the Select object.
+** Generate a human-readable description of a Select object.
 */
 SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){
   int n = 0;
@@ -26205,6 +26247,15 @@
       sqlite3TreeViewExpr(pView, pExpr->pRight, 0);
       break;
     }
+    case TK_VECTOR: {
+      sqlite3TreeViewBareExprList(pView, pExpr->x.pList, "VECTOR");
+      break;
+    }
+    case TK_SELECT_COLUMN: {
+      sqlite3TreeViewLine(pView, "SELECT-COLUMN %d", pExpr->iColumn);
+      sqlite3TreeViewSelect(pView, pExpr->pLeft->x.pSelect, 0);
+      break;
+    }
     default: {
       sqlite3TreeViewLine(pView, "op=%d", pExpr->op);
       break;
@@ -26221,21 +26272,20 @@
   sqlite3TreeViewPop(pView);
 }
 
+
 /*
 ** Generate a human-readable explanation of an expression list.
 */
-SQLITE_PRIVATE void sqlite3TreeViewExprList(
+SQLITE_PRIVATE void sqlite3TreeViewBareExprList(
   TreeView *pView,
   const ExprList *pList,
-  u8 moreToFollow,
   const char *zLabel
 ){
-  int i;
-  pView = sqlite3TreeViewPush(pView, moreToFollow);
   if( zLabel==0 || zLabel[0]==0 ) zLabel = "LIST";
   if( pList==0 ){
     sqlite3TreeViewLine(pView, "%s (empty)", zLabel);
   }else{
+    int i;
     sqlite3TreeViewLine(pView, "%s", zLabel);
     for(i=0; i<pList->nExpr; i++){
       int j = pList->a[i].u.x.iOrderByCol;
@@ -26247,6 +26297,15 @@
       if( j ) sqlite3TreeViewPop(pView);
     }
   }
+}
+SQLITE_PRIVATE void sqlite3TreeViewExprList(
+  TreeView *pView,
+  const ExprList *pList,
+  u8 moreToFollow,
+  const char *zLabel
+){
+  pView = sqlite3TreeViewPush(pView, moreToFollow);
+  sqlite3TreeViewBareExprList(pView, pList, zLabel);
   sqlite3TreeViewPop(pView);
 }
 
@@ -26286,7 +26345,7 @@
 /*
 ** Return N random bytes.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *pBuf){
+SQLITE_API void sqlite3_randomness(int N, void *pBuf){
   unsigned char t;
   unsigned char *zBuf = pBuf;
 
@@ -27489,7 +27548,7 @@
 ** case-independent fashion, using the same definition of "case
 ** independence" that SQLite uses internally when comparing identifiers.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *zLeft, const char *zRight){
+SQLITE_API int sqlite3_stricmp(const char *zLeft, const char *zRight){
   if( zLeft==0 ){
     return zRight ? -1 : 0;
   }else if( zRight==0 ){
@@ -27510,7 +27569,7 @@
   }
   return c;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){
+SQLITE_API int sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){
   register unsigned char *a, *b;
   if( zLeft==0 ){
     return zRight ? -1 : 0;
@@ -28508,36 +28567,21 @@
     return sqlite3AddInt64(pA, -iB);
   }
 }
-#define TWOPOWER32 (((i64)1)<<32)
-#define TWOPOWER31 (((i64)1)<<31)
 SQLITE_PRIVATE int sqlite3MulInt64(i64 *pA, i64 iB){
   i64 iA = *pA;
-  i64 iA1, iA0, iB1, iB0, r;
-
-  iA1 = iA/TWOPOWER32;
-  iA0 = iA % TWOPOWER32;
-  iB1 = iB/TWOPOWER32;
-  iB0 = iB % TWOPOWER32;
-  if( iA1==0 ){
-    if( iB1==0 ){
-      *pA *= iB;
-      return 0;
+  if( iB>0 ){
+    if( iA>LARGEST_INT64/iB ) return 1;
+    if( iA<SMALLEST_INT64/iB ) return 1;
+  }else if( iB<0 ){
+    if( iA>0 ){
+      if( iB<SMALLEST_INT64/iA ) return 1;
+    }else if( iA<0 ){
+      if( iB==SMALLEST_INT64 ) return 1;
+      if( iA==SMALLEST_INT64 ) return 1;
+      if( -iA>LARGEST_INT64/-iB ) return 1;
     }
-    r = iA0*iB1;
-  }else if( iB1==0 ){
-    r = iA1*iB0;
-  }else{
-    /* If both iA1 and iB1 are non-zero, overflow will result */
-    return 1;
   }
-  testcase( r==(-TWOPOWER31)-1 );
-  testcase( r==(-TWOPOWER31) );
-  testcase( r==TWOPOWER31 );
-  testcase( r==TWOPOWER31-1 );
-  if( r<(-TWOPOWER31) || r>=TWOPOWER31 ) return 1;
-  r *= TWOPOWER32;
-  if( sqlite3AddInt64(&r, iA0*iB0) ) return 1;
-  *pA = r;
+  *pA = iA*iB;
   return 0;
 }
 
@@ -28732,7 +28776,11 @@
   unsigned int h = 0;
   unsigned char c;
   while( (c = (unsigned char)*z++)!=0 ){     /*OPTIMIZATION-IF-TRUE*/
-    h = (h<<3) ^ h ^ sqlite3UpperToLower[c];
+    /* Knuth multiplicative hashing.  (Sorting & Searching, p. 510).
+    ** 0x9e3779b1 is 2654435761 which is the closest prime number to
+    ** (2**32)*golden_ratio, where golden_ratio = (sqrt(5) - 1)/2. */
+    h += sqlite3UpperToLower[c];
+    h *= 0x9e3779b1;
   }
   return h;
 }
@@ -28992,13 +29040,13 @@
     /*  33 */ "NotExists"        OpHelp("intkey=r[P3]"),
     /*  34 */ "IsNull"           OpHelp("if r[P1]==NULL goto P2"),
     /*  35 */ "NotNull"          OpHelp("if r[P1]!=NULL goto P2"),
-    /*  36 */ "Ne"               OpHelp("if r[P1]!=r[P3] goto P2"),
-    /*  37 */ "Eq"               OpHelp("if r[P1]==r[P3] goto P2"),
-    /*  38 */ "Gt"               OpHelp("if r[P1]>r[P3] goto P2"),
-    /*  39 */ "Le"               OpHelp("if r[P1]<=r[P3] goto P2"),
-    /*  40 */ "Lt"               OpHelp("if r[P1]<r[P3] goto P2"),
-    /*  41 */ "Ge"               OpHelp("if r[P1]>=r[P3] goto P2"),
-    /*  42 */ "Last"             OpHelp(""),
+    /*  36 */ "Ne"               OpHelp("IF r[P3]!=r[P1]"),
+    /*  37 */ "Eq"               OpHelp("IF r[P3]==r[P1]"),
+    /*  38 */ "Gt"               OpHelp("IF r[P3]>r[P1]"),
+    /*  39 */ "Le"               OpHelp("IF r[P3]<=r[P1]"),
+    /*  40 */ "Lt"               OpHelp("IF r[P3]<r[P1]"),
+    /*  41 */ "Ge"               OpHelp("IF r[P3]>=r[P1]"),
+    /*  42 */ "ElseNotEq"        OpHelp(""),
     /*  43 */ "BitAnd"           OpHelp("r[P3]=r[P1]&r[P2]"),
     /*  44 */ "BitOr"            OpHelp("r[P3]=r[P1]|r[P2]"),
     /*  45 */ "ShiftLeft"        OpHelp("r[P3]=r[P2]<<r[P1]"),
@@ -29009,115 +29057,116 @@
     /*  50 */ "Divide"           OpHelp("r[P3]=r[P2]/r[P1]"),
     /*  51 */ "Remainder"        OpHelp("r[P3]=r[P2]%r[P1]"),
     /*  52 */ "Concat"           OpHelp("r[P3]=r[P2]+r[P1]"),
-    /*  53 */ "SorterSort"       OpHelp(""),
+    /*  53 */ "Last"             OpHelp(""),
     /*  54 */ "BitNot"           OpHelp("r[P1]= ~r[P1]"),
-    /*  55 */ "Sort"             OpHelp(""),
-    /*  56 */ "Rewind"           OpHelp(""),
-    /*  57 */ "IdxLE"            OpHelp("key=r[P3@P4]"),
-    /*  58 */ "IdxGT"            OpHelp("key=r[P3@P4]"),
-    /*  59 */ "IdxLT"            OpHelp("key=r[P3@P4]"),
-    /*  60 */ "IdxGE"            OpHelp("key=r[P3@P4]"),
-    /*  61 */ "RowSetRead"       OpHelp("r[P3]=rowset(P1)"),
-    /*  62 */ "RowSetTest"       OpHelp("if r[P3] in rowset(P1) goto P2"),
-    /*  63 */ "Program"          OpHelp(""),
-    /*  64 */ "FkIfZero"         OpHelp("if fkctr[P1]==0 goto P2"),
-    /*  65 */ "IfPos"            OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"),
-    /*  66 */ "IfNotZero"        OpHelp("if r[P1]!=0 then r[P1]-=P3, goto P2"),
-    /*  67 */ "DecrJumpZero"     OpHelp("if (--r[P1])==0 goto P2"),
-    /*  68 */ "IncrVacuum"       OpHelp(""),
-    /*  69 */ "VNext"            OpHelp(""),
-    /*  70 */ "Init"             OpHelp("Start at P2"),
-    /*  71 */ "Return"           OpHelp(""),
-    /*  72 */ "EndCoroutine"     OpHelp(""),
-    /*  73 */ "HaltIfNull"       OpHelp("if r[P3]=null halt"),
-    /*  74 */ "Halt"             OpHelp(""),
-    /*  75 */ "Integer"          OpHelp("r[P2]=P1"),
-    /*  76 */ "Int64"            OpHelp("r[P2]=P4"),
-    /*  77 */ "String"           OpHelp("r[P2]='P4' (len=P1)"),
-    /*  78 */ "Null"             OpHelp("r[P2..P3]=NULL"),
-    /*  79 */ "SoftNull"         OpHelp("r[P1]=NULL"),
-    /*  80 */ "Blob"             OpHelp("r[P2]=P4 (len=P1)"),
-    /*  81 */ "Variable"         OpHelp("r[P2]=parameter(P1,P4)"),
-    /*  82 */ "Move"             OpHelp("r[P2@P3]=r[P1@P3]"),
-    /*  83 */ "Copy"             OpHelp("r[P2@P3+1]=r[P1@P3+1]"),
-    /*  84 */ "SCopy"            OpHelp("r[P2]=r[P1]"),
-    /*  85 */ "IntCopy"          OpHelp("r[P2]=r[P1]"),
-    /*  86 */ "ResultRow"        OpHelp("output=r[P1@P2]"),
-    /*  87 */ "CollSeq"          OpHelp(""),
-    /*  88 */ "Function0"        OpHelp("r[P3]=func(r[P2@P5])"),
-    /*  89 */ "Function"         OpHelp("r[P3]=func(r[P2@P5])"),
-    /*  90 */ "AddImm"           OpHelp("r[P1]=r[P1]+P2"),
-    /*  91 */ "RealAffinity"     OpHelp(""),
-    /*  92 */ "Cast"             OpHelp("affinity(r[P1])"),
-    /*  93 */ "Permutation"      OpHelp(""),
-    /*  94 */ "Compare"          OpHelp("r[P1@P3] <-> r[P2@P3]"),
-    /*  95 */ "Column"           OpHelp("r[P3]=PX"),
-    /*  96 */ "Affinity"         OpHelp("affinity(r[P1@P2])"),
+    /*  55 */ "SorterSort"       OpHelp(""),
+    /*  56 */ "Sort"             OpHelp(""),
+    /*  57 */ "Rewind"           OpHelp(""),
+    /*  58 */ "IdxLE"            OpHelp("key=r[P3@P4]"),
+    /*  59 */ "IdxGT"            OpHelp("key=r[P3@P4]"),
+    /*  60 */ "IdxLT"            OpHelp("key=r[P3@P4]"),
+    /*  61 */ "IdxGE"            OpHelp("key=r[P3@P4]"),
+    /*  62 */ "RowSetRead"       OpHelp("r[P3]=rowset(P1)"),
+    /*  63 */ "RowSetTest"       OpHelp("if r[P3] in rowset(P1) goto P2"),
+    /*  64 */ "Program"          OpHelp(""),
+    /*  65 */ "FkIfZero"         OpHelp("if fkctr[P1]==0 goto P2"),
+    /*  66 */ "IfPos"            OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"),
+    /*  67 */ "IfNotZero"        OpHelp("if r[P1]!=0 then r[P1]-=P3, goto P2"),
+    /*  68 */ "DecrJumpZero"     OpHelp("if (--r[P1])==0 goto P2"),
+    /*  69 */ "IncrVacuum"       OpHelp(""),
+    /*  70 */ "VNext"            OpHelp(""),
+    /*  71 */ "Init"             OpHelp("Start at P2"),
+    /*  72 */ "Return"           OpHelp(""),
+    /*  73 */ "EndCoroutine"     OpHelp(""),
+    /*  74 */ "HaltIfNull"       OpHelp("if r[P3]=null halt"),
+    /*  75 */ "Halt"             OpHelp(""),
+    /*  76 */ "Integer"          OpHelp("r[P2]=P1"),
+    /*  77 */ "Int64"            OpHelp("r[P2]=P4"),
+    /*  78 */ "String"           OpHelp("r[P2]='P4' (len=P1)"),
+    /*  79 */ "Null"             OpHelp("r[P2..P3]=NULL"),
+    /*  80 */ "SoftNull"         OpHelp("r[P1]=NULL"),
+    /*  81 */ "Blob"             OpHelp("r[P2]=P4 (len=P1)"),
+    /*  82 */ "Variable"         OpHelp("r[P2]=parameter(P1,P4)"),
+    /*  83 */ "Move"             OpHelp("r[P2@P3]=r[P1@P3]"),
+    /*  84 */ "Copy"             OpHelp("r[P2@P3+1]=r[P1@P3+1]"),
+    /*  85 */ "SCopy"            OpHelp("r[P2]=r[P1]"),
+    /*  86 */ "IntCopy"          OpHelp("r[P2]=r[P1]"),
+    /*  87 */ "ResultRow"        OpHelp("output=r[P1@P2]"),
+    /*  88 */ "CollSeq"          OpHelp(""),
+    /*  89 */ "Function0"        OpHelp("r[P3]=func(r[P2@P5])"),
+    /*  90 */ "Function"         OpHelp("r[P3]=func(r[P2@P5])"),
+    /*  91 */ "AddImm"           OpHelp("r[P1]=r[P1]+P2"),
+    /*  92 */ "RealAffinity"     OpHelp(""),
+    /*  93 */ "Cast"             OpHelp("affinity(r[P1])"),
+    /*  94 */ "Permutation"      OpHelp(""),
+    /*  95 */ "Compare"          OpHelp("r[P1@P3] <-> r[P2@P3]"),
+    /*  96 */ "Column"           OpHelp("r[P3]=PX"),
     /*  97 */ "String8"          OpHelp("r[P2]='P4'"),
-    /*  98 */ "MakeRecord"       OpHelp("r[P3]=mkrec(r[P1@P2])"),
-    /*  99 */ "Count"            OpHelp("r[P2]=count()"),
-    /* 100 */ "ReadCookie"       OpHelp(""),
-    /* 101 */ "SetCookie"        OpHelp(""),
-    /* 102 */ "ReopenIdx"        OpHelp("root=P2 iDb=P3"),
-    /* 103 */ "OpenRead"         OpHelp("root=P2 iDb=P3"),
-    /* 104 */ "OpenWrite"        OpHelp("root=P2 iDb=P3"),
-    /* 105 */ "OpenAutoindex"    OpHelp("nColumn=P2"),
-    /* 106 */ "OpenEphemeral"    OpHelp("nColumn=P2"),
-    /* 107 */ "SorterOpen"       OpHelp(""),
-    /* 108 */ "SequenceTest"     OpHelp("if( cursor[P1].ctr++ ) pc = P2"),
-    /* 109 */ "OpenPseudo"       OpHelp("P3 columns in r[P2]"),
-    /* 110 */ "Close"            OpHelp(""),
-    /* 111 */ "ColumnsUsed"      OpHelp(""),
-    /* 112 */ "Sequence"         OpHelp("r[P2]=cursor[P1].ctr++"),
-    /* 113 */ "NewRowid"         OpHelp("r[P2]=rowid"),
-    /* 114 */ "Insert"           OpHelp("intkey=r[P3] data=r[P2]"),
-    /* 115 */ "InsertInt"        OpHelp("intkey=P3 data=r[P2]"),
-    /* 116 */ "Delete"           OpHelp(""),
-    /* 117 */ "ResetCount"       OpHelp(""),
-    /* 118 */ "SorterCompare"    OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"),
-    /* 119 */ "SorterData"       OpHelp("r[P2]=data"),
-    /* 120 */ "RowKey"           OpHelp("r[P2]=key"),
-    /* 121 */ "RowData"          OpHelp("r[P2]=data"),
-    /* 122 */ "Rowid"            OpHelp("r[P2]=rowid"),
-    /* 123 */ "NullRow"          OpHelp(""),
-    /* 124 */ "SorterInsert"     OpHelp(""),
-    /* 125 */ "IdxInsert"        OpHelp("key=r[P2]"),
-    /* 126 */ "IdxDelete"        OpHelp("key=r[P2@P3]"),
-    /* 127 */ "Seek"             OpHelp("Move P3 to P1.rowid"),
-    /* 128 */ "IdxRowid"         OpHelp("r[P2]=rowid"),
-    /* 129 */ "Destroy"          OpHelp(""),
-    /* 130 */ "Clear"            OpHelp(""),
-    /* 131 */ "ResetSorter"      OpHelp(""),
-    /* 132 */ "CreateIndex"      OpHelp("r[P2]=root iDb=P1"),
-    /* 133 */ "Real"             OpHelp("r[P2]=P4"),
-    /* 134 */ "CreateTable"      OpHelp("r[P2]=root iDb=P1"),
-    /* 135 */ "ParseSchema"      OpHelp(""),
-    /* 136 */ "LoadAnalysis"     OpHelp(""),
-    /* 137 */ "DropTable"        OpHelp(""),
-    /* 138 */ "DropIndex"        OpHelp(""),
-    /* 139 */ "DropTrigger"      OpHelp(""),
-    /* 140 */ "IntegrityCk"      OpHelp(""),
-    /* 141 */ "RowSetAdd"        OpHelp("rowset(P1)=r[P2]"),
-    /* 142 */ "Param"            OpHelp(""),
-    /* 143 */ "FkCounter"        OpHelp("fkctr[P1]+=P2"),
-    /* 144 */ "MemMax"           OpHelp("r[P1]=max(r[P1],r[P2])"),
-    /* 145 */ "OffsetLimit"      OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"),
-    /* 146 */ "AggStep0"         OpHelp("accum=r[P3] step(r[P2@P5])"),
-    /* 147 */ "AggStep"          OpHelp("accum=r[P3] step(r[P2@P5])"),
-    /* 148 */ "AggFinal"         OpHelp("accum=r[P1] N=P2"),
-    /* 149 */ "Expire"           OpHelp(""),
-    /* 150 */ "TableLock"        OpHelp("iDb=P1 root=P2 write=P3"),
-    /* 151 */ "VBegin"           OpHelp(""),
-    /* 152 */ "VCreate"          OpHelp(""),
-    /* 153 */ "VDestroy"         OpHelp(""),
-    /* 154 */ "VOpen"            OpHelp(""),
-    /* 155 */ "VColumn"          OpHelp("r[P3]=vcolumn(P2)"),
-    /* 156 */ "VRename"          OpHelp(""),
-    /* 157 */ "Pagecount"        OpHelp(""),
-    /* 158 */ "MaxPgcnt"         OpHelp(""),
-    /* 159 */ "CursorHint"       OpHelp(""),
-    /* 160 */ "Noop"             OpHelp(""),
-    /* 161 */ "Explain"          OpHelp(""),
+    /*  98 */ "Affinity"         OpHelp("affinity(r[P1@P2])"),
+    /*  99 */ "MakeRecord"       OpHelp("r[P3]=mkrec(r[P1@P2])"),
+    /* 100 */ "Count"            OpHelp("r[P2]=count()"),
+    /* 101 */ "ReadCookie"       OpHelp(""),
+    /* 102 */ "SetCookie"        OpHelp(""),
+    /* 103 */ "ReopenIdx"        OpHelp("root=P2 iDb=P3"),
+    /* 104 */ "OpenRead"         OpHelp("root=P2 iDb=P3"),
+    /* 105 */ "OpenWrite"        OpHelp("root=P2 iDb=P3"),
+    /* 106 */ "OpenAutoindex"    OpHelp("nColumn=P2"),
+    /* 107 */ "OpenEphemeral"    OpHelp("nColumn=P2"),
+    /* 108 */ "SorterOpen"       OpHelp(""),
+    /* 109 */ "SequenceTest"     OpHelp("if( cursor[P1].ctr++ ) pc = P2"),
+    /* 110 */ "OpenPseudo"       OpHelp("P3 columns in r[P2]"),
+    /* 111 */ "Close"            OpHelp(""),
+    /* 112 */ "ColumnsUsed"      OpHelp(""),
+    /* 113 */ "Sequence"         OpHelp("r[P2]=cursor[P1].ctr++"),
+    /* 114 */ "NewRowid"         OpHelp("r[P2]=rowid"),
+    /* 115 */ "Insert"           OpHelp("intkey=r[P3] data=r[P2]"),
+    /* 116 */ "InsertInt"        OpHelp("intkey=P3 data=r[P2]"),
+    /* 117 */ "Delete"           OpHelp(""),
+    /* 118 */ "ResetCount"       OpHelp(""),
+    /* 119 */ "SorterCompare"    OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"),
+    /* 120 */ "SorterData"       OpHelp("r[P2]=data"),
+    /* 121 */ "RowKey"           OpHelp("r[P2]=key"),
+    /* 122 */ "RowData"          OpHelp("r[P2]=data"),
+    /* 123 */ "Rowid"            OpHelp("r[P2]=rowid"),
+    /* 124 */ "NullRow"          OpHelp(""),
+    /* 125 */ "SorterInsert"     OpHelp(""),
+    /* 126 */ "IdxInsert"        OpHelp("key=r[P2]"),
+    /* 127 */ "IdxDelete"        OpHelp("key=r[P2@P3]"),
+    /* 128 */ "Seek"             OpHelp("Move P3 to P1.rowid"),
+    /* 129 */ "IdxRowid"         OpHelp("r[P2]=rowid"),
+    /* 130 */ "Destroy"          OpHelp(""),
+    /* 131 */ "Clear"            OpHelp(""),
+    /* 132 */ "Real"             OpHelp("r[P2]=P4"),
+    /* 133 */ "ResetSorter"      OpHelp(""),
+    /* 134 */ "CreateIndex"      OpHelp("r[P2]=root iDb=P1"),
+    /* 135 */ "CreateTable"      OpHelp("r[P2]=root iDb=P1"),
+    /* 136 */ "ParseSchema"      OpHelp(""),
+    /* 137 */ "LoadAnalysis"     OpHelp(""),
+    /* 138 */ "DropTable"        OpHelp(""),
+    /* 139 */ "DropIndex"        OpHelp(""),
+    /* 140 */ "DropTrigger"      OpHelp(""),
+    /* 141 */ "IntegrityCk"      OpHelp(""),
+    /* 142 */ "RowSetAdd"        OpHelp("rowset(P1)=r[P2]"),
+    /* 143 */ "Param"            OpHelp(""),
+    /* 144 */ "FkCounter"        OpHelp("fkctr[P1]+=P2"),
+    /* 145 */ "MemMax"           OpHelp("r[P1]=max(r[P1],r[P2])"),
+    /* 146 */ "OffsetLimit"      OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"),
+    /* 147 */ "AggStep0"         OpHelp("accum=r[P3] step(r[P2@P5])"),
+    /* 148 */ "AggStep"          OpHelp("accum=r[P3] step(r[P2@P5])"),
+    /* 149 */ "AggFinal"         OpHelp("accum=r[P1] N=P2"),
+    /* 150 */ "Expire"           OpHelp(""),
+    /* 151 */ "TableLock"        OpHelp("iDb=P1 root=P2 write=P3"),
+    /* 152 */ "VBegin"           OpHelp(""),
+    /* 153 */ "VCreate"          OpHelp(""),
+    /* 154 */ "VDestroy"         OpHelp(""),
+    /* 155 */ "VOpen"            OpHelp(""),
+    /* 156 */ "VColumn"          OpHelp("r[P3]=vcolumn(P2)"),
+    /* 157 */ "VRename"          OpHelp(""),
+    /* 158 */ "Pagecount"        OpHelp(""),
+    /* 159 */ "MaxPgcnt"         OpHelp(""),
+    /* 160 */ "CursorHint"       OpHelp(""),
+    /* 161 */ "Noop"             OpHelp(""),
+    /* 162 */ "Explain"          OpHelp(""),
   };
   return azName[i];
 }
@@ -34855,6 +34904,27 @@
 }
 
 /*
+** Find the mode, uid and gid of file zFile. 
+*/
+static int getFileMode(
+  const char *zFile,              /* File name */
+  mode_t *pMode,                  /* OUT: Permissions of zFile */
+  uid_t *pUid,                    /* OUT: uid of zFile. */
+  gid_t *pGid                     /* OUT: gid of zFile. */
+){
+  struct stat sStat;              /* Output of stat() on database file */
+  int rc = SQLITE_OK;
+  if( 0==osStat(zFile, &sStat) ){
+    *pMode = sStat.st_mode & 0777;
+    *pUid = sStat.st_uid;
+    *pGid = sStat.st_gid;
+  }else{
+    rc = SQLITE_IOERR_FSTAT;
+  }
+  return rc;
+}
+
+/*
 ** This function is called by unixOpen() to determine the unix permissions
 ** to create new files with. If no error occurs, then SQLITE_OK is returned
 ** and a value suitable for passing as the third argument to open(2) is
@@ -34889,7 +34959,6 @@
   if( flags & (SQLITE_OPEN_WAL|SQLITE_OPEN_MAIN_JOURNAL) ){
     char zDb[MAX_PATHNAME+1];     /* Database file path */
     int nDb;                      /* Number of valid bytes in zDb */
-    struct stat sStat;            /* Output of stat() on database file */
 
     /* zPath is a path to a WAL or journal file. The following block derives
     ** the path to the associated database file from zPath. This block handles
@@ -34920,15 +34989,18 @@
     memcpy(zDb, zPath, nDb);
     zDb[nDb] = '\0';
 
-    if( 0==osStat(zDb, &sStat) ){
-      *pMode = sStat.st_mode & 0777;
-      *pUid = sStat.st_uid;
-      *pGid = sStat.st_gid;
-    }else{
-      rc = SQLITE_IOERR_FSTAT;
-    }
+    rc = getFileMode(zDb, pMode, pUid, pGid);
   }else if( flags & SQLITE_OPEN_DELETEONCLOSE ){
     *pMode = 0600;
+  }else if( flags & SQLITE_OPEN_URI ){
+    /* If this is a main database file and the file was opened using a URI
+    ** filename, check for the "modeof" parameter. If present, interpret
+    ** its value as a filename and try to copy the mode, uid and gid from
+    ** that file.  */
+    const char *z = sqlite3_uri_parameter(zPath, "modeof");
+    if( z ){
+      rc = getFileMode(z, pMode, pUid, pGid);
+    }
   }
   return rc;
 }
@@ -36809,7 +36881,7 @@
 ** necessarily been initialized when this routine is called, and so they
 ** should not be used.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void){ 
+SQLITE_API int sqlite3_os_init(void){ 
   /* 
   ** The following macro defines an initializer for an sqlite3_vfs object.
   ** The name of the VFS is NAME.  The pAppData is a pointer to a pointer
@@ -36908,7 +36980,7 @@
 ** to release dynamically allocated objects.  But not on unix.
 ** This routine is a no-op for unix.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void){ 
+SQLITE_API int sqlite3_os_end(void){ 
   return SQLITE_OK; 
 }
  
@@ -38343,7 +38415,7 @@
 ** "pnLargest" argument, if non-zero, will be used to return the size of the
 ** largest committed free block in the heap, in bytes.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_compact_heap(LPUINT pnLargest){
+SQLITE_API int sqlite3_win32_compact_heap(LPUINT pnLargest){
   int rc = SQLITE_OK;
   UINT nLargest = 0;
   HANDLE hHeap;
@@ -38383,7 +38455,7 @@
 ** the sqlite3_memory_used() function does not return zero, SQLITE_BUSY will
 ** be returned and no changes will be made to the Win32 native heap.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_reset_heap(){
+SQLITE_API int sqlite3_win32_reset_heap(){
   int rc;
   MUTEX_LOGIC( sqlite3_mutex *pMaster; ) /* The main static mutex */
   MUTEX_LOGIC( sqlite3_mutex *pMem; )    /* The memsys static mutex */
@@ -38428,7 +38500,7 @@
 ** (if available).
 */
 
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_write_debug(const char *zBuf, int nBuf){
+SQLITE_API void sqlite3_win32_write_debug(const char *zBuf, int nBuf){
   char zDbgBuf[SQLITE_WIN32_DBG_BUF_SIZE];
   int nMin = MIN(nBuf, (SQLITE_WIN32_DBG_BUF_SIZE - 1)); /* may be negative. */
   if( nMin<-1 ) nMin = -1; /* all negative values become -1. */
@@ -38474,7 +38546,7 @@
 static HANDLE sleepObj = NULL;
 #endif
 
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_sleep(DWORD milliseconds){
+SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds){
 #if SQLITE_OS_WINRT
   if ( sleepObj==NULL ){
     sleepObj = osCreateEventExW(NULL, NULL, CREATE_EVENT_MANUAL_RESET,
@@ -38523,7 +38595,7 @@
 ** This function determines if the machine is running a version of Windows
 ** based on the NT kernel.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_is_nt(void){
+SQLITE_API int sqlite3_win32_is_nt(void){
 #if SQLITE_OS_WINRT
   /*
   ** NOTE: The WinRT sub-platform is always assumed to be based on the NT
@@ -38911,7 +38983,7 @@
 /*
 ** This is a public wrapper for the winUtf8ToUnicode() function.
 */
-SQLITE_API LPWSTR SQLITE_STDCALL sqlite3_win32_utf8_to_unicode(const char *zText){
+SQLITE_API LPWSTR sqlite3_win32_utf8_to_unicode(const char *zText){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !zText ){
     (void)SQLITE_MISUSE_BKPT;
@@ -38927,7 +38999,7 @@
 /*
 ** This is a public wrapper for the winUnicodeToUtf8() function.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_unicode_to_utf8(LPCWSTR zWideText){
+SQLITE_API char *sqlite3_win32_unicode_to_utf8(LPCWSTR zWideText){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !zWideText ){
     (void)SQLITE_MISUSE_BKPT;
@@ -38943,7 +39015,7 @@
 /*
 ** This is a public wrapper for the winMbcsToUtf8() function.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_mbcs_to_utf8(const char *zText){
+SQLITE_API char *sqlite3_win32_mbcs_to_utf8(const char *zText){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !zText ){
     (void)SQLITE_MISUSE_BKPT;
@@ -38959,7 +39031,7 @@
 /*
 ** This is a public wrapper for the winMbcsToUtf8() function.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_mbcs_to_utf8_v2(const char *zText, int useAnsi){
+SQLITE_API char *sqlite3_win32_mbcs_to_utf8_v2(const char *zText, int useAnsi){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !zText ){
     (void)SQLITE_MISUSE_BKPT;
@@ -38975,7 +39047,7 @@
 /*
 ** This is a public wrapper for the winUtf8ToMbcs() function.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_utf8_to_mbcs(const char *zText){
+SQLITE_API char *sqlite3_win32_utf8_to_mbcs(const char *zText){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !zText ){
     (void)SQLITE_MISUSE_BKPT;
@@ -38991,7 +39063,7 @@
 /*
 ** This is a public wrapper for the winUtf8ToMbcs() function.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_utf8_to_mbcs_v2(const char *zText, int useAnsi){
+SQLITE_API char *sqlite3_win32_utf8_to_mbcs_v2(const char *zText, int useAnsi){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !zText ){
     (void)SQLITE_MISUSE_BKPT;
@@ -39011,7 +39083,7 @@
 ** argument is the name of the directory to use.  The return value will be
 ** SQLITE_OK if successful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){
+SQLITE_API int sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){
   char **ppDirectory = 0;
 #ifndef SQLITE_OMIT_AUTOINIT
   int rc = sqlite3_initialize();
@@ -42929,7 +43001,7 @@
 /*
 ** Initialize and deinitialize the operating system interface.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void){
+SQLITE_API int sqlite3_os_init(void){
   static sqlite3_vfs winVfs = {
     3,                     /* iVersion */
     sizeof(winFile),       /* szOsFile */
@@ -43060,7 +43132,7 @@
   return SQLITE_OK;
 }
 
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void){
+SQLITE_API int sqlite3_os_end(void){
 #if SQLITE_OS_WINRT
   if( sleepObj!=NULL ){
     osCloseHandle(sleepObj);
@@ -43951,7 +44023,7 @@
   assert( pPage!=0 );
   pPgHdr = (PgHdr*)pPage->pExtra;
   assert( pPgHdr->pPage==0 );
-  memset(pPgHdr, 0, sizeof(PgHdr));
+  memset(&pPgHdr->pDirty, 0, sizeof(PgHdr) - offsetof(PgHdr,pDirty));
   pPgHdr->pPage = pPage;
   pPgHdr->pData = pPage->pBuf;
   pPgHdr->pExtra = (void *)&pPgHdr[1];
@@ -44645,7 +44717,7 @@
     szBulk = -1024 * (i64)pcache1.nInitPage;
   }
   if( szBulk > pCache->szAlloc*(i64)pCache->nMax ){
-    szBulk = pCache->szAlloc*pCache->nMax;
+    szBulk = pCache->szAlloc*(i64)pCache->nMax;
   }
   zBulk = pCache->pBulk = sqlite3Malloc( szBulk );
   sqlite3EndBenignMalloc();
@@ -52933,7 +53005,11 @@
 ** savepoint. If no errors occur, SQLITE_OK is returned.
 */ 
 SQLITE_PRIVATE int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint){
-  int rc = pPager->errCode;       /* Return code */
+  int rc = pPager->errCode;
+  
+#ifdef SQLITE_ENABLE_ZIPVFS
+  if( op==SAVEPOINT_RELEASE ) rc = SQLITE_OK;
+#endif
 
   assert( op==SAVEPOINT_RELEASE || op==SAVEPOINT_ROLLBACK );
   assert( iSavepoint>=0 || op==SAVEPOINT_ROLLBACK );
@@ -52974,6 +53050,20 @@
       rc = pagerPlaybackSavepoint(pPager, pSavepoint);
       assert(rc!=SQLITE_DONE);
     }
+    
+#ifdef SQLITE_ENABLE_ZIPVFS
+    /* If the cache has been modified but the savepoint cannot be rolled 
+    ** back journal_mode=off, put the pager in the error state. This way,
+    ** if the VFS used by this pager includes ZipVFS, the entire transaction
+    ** can be rolled back at the ZipVFS level.  */
+    else if( 
+        pPager->journalMode==PAGER_JOURNALMODE_OFF 
+     && pPager->eState>=PAGER_WRITER_CACHEMOD
+    ){
+      pPager->errCode = SQLITE_ABORT;
+      pPager->eState = PAGER_ERROR;
+    }
+#endif
   }
 
   return rc;
@@ -57085,7 +57175,7 @@
 ** Return a +ve value if snapshot p1 is newer than p2. A -ve value if
 ** p1 is older than p2 and zero if p1 and p2 are the same snapshot.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_snapshot_cmp(sqlite3_snapshot *p1, sqlite3_snapshot *p2){
+SQLITE_API int sqlite3_snapshot_cmp(sqlite3_snapshot *p1, sqlite3_snapshot *p2){
   WalIndexHdr *pHdr1 = (WalIndexHdr*)p1;
   WalIndexHdr *pHdr2 = (WalIndexHdr*)p2;
 
@@ -58222,7 +58312,7 @@
 ** The shared cache setting effects only future calls to
 ** sqlite3_open(), sqlite3_open16(), or sqlite3_open_v2().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int enable){
+SQLITE_API int sqlite3_enable_shared_cache(int enable){
   sqlite3GlobalConfig.sharedCacheEnabled = enable;
   return SQLITE_OK;
 }
@@ -58899,7 +58989,7 @@
 ){
   int rc;                    /* Status code */
   UnpackedRecord *pIdxKey;   /* Unpacked index key */
-  char aSpace[200];          /* Temp space for pIdxKey - to avoid a malloc */
+  char aSpace[384];          /* Temp space for pIdxKey - to avoid a malloc */
   char *pFree = 0;
 
   if( pKey ){
@@ -59741,8 +59831,11 @@
   if( data[iPtr+1]==0 && data[iPtr]==0 ){
     iFreeBlk = 0;  /* Shortcut for the case when the freelist is empty */
   }else{
-    while( (iFreeBlk = get2byte(&data[iPtr]))>0 && iFreeBlk<iStart ){
-      if( iFreeBlk<iPtr+4 ) return SQLITE_CORRUPT_BKPT;
+    while( (iFreeBlk = get2byte(&data[iPtr]))<iStart ){
+      if( iFreeBlk<iPtr+4 ){
+        if( iFreeBlk==0 ) break;
+        return SQLITE_CORRUPT_BKPT;
+      }
       iPtr = iFreeBlk;
     }
     if( iFreeBlk>iLast ) return SQLITE_CORRUPT_BKPT;
@@ -64233,8 +64326,6 @@
     nHeader += putVarint32(&pCell[nHeader], nPayload);
     nHeader += putVarint(&pCell[nHeader], *(u64*)&pX->nKey);
   }else{
-    assert( pX->nData==0 );
-    assert( pX->nZero==0 );
     assert( pX->nKey<=0x7fffffff && pX->pKey!=0 );
     nSrc = nPayload = (int)pX->nKey;
     pSrc = pX->pKey;
@@ -67934,22 +68025,16 @@
   int i = sqlite3FindDbName(pDb, zDb);
 
   if( i==1 ){
-    Parse *pParse;
+    Parse sParse;
     int rc = 0;
-    pParse = sqlite3StackAllocZero(pErrorDb, sizeof(*pParse));
-    if( pParse==0 ){
-      sqlite3ErrorWithMsg(pErrorDb, SQLITE_NOMEM, "out of memory");
-      rc = SQLITE_NOMEM_BKPT;
-    }else{
-      pParse->db = pDb;
-      if( sqlite3OpenTempDatabase(pParse) ){
-        sqlite3ErrorWithMsg(pErrorDb, pParse->rc, "%s", pParse->zErrMsg);
-        rc = SQLITE_ERROR;
-      }
-      sqlite3DbFree(pErrorDb, pParse->zErrMsg);
-      sqlite3ParserReset(pParse);
-      sqlite3StackFree(pErrorDb, pParse);
+    memset(&sParse, 0, sizeof(sParse));
+    sParse.db = pDb;
+    if( sqlite3OpenTempDatabase(&sParse) ){
+      sqlite3ErrorWithMsg(pErrorDb, sParse.rc, "%s", sParse.zErrMsg);
+      rc = SQLITE_ERROR;
     }
+    sqlite3DbFree(pErrorDb, sParse.zErrMsg);
+    sqlite3ParserReset(&sParse);
     if( rc ){
       return 0;
     }
@@ -67995,7 +68080,7 @@
 ** If an error occurs, NULL is returned and an error code and error message
 ** stored in database handle pDestDb.
 */
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
   sqlite3* pDestDb,                     /* Database to write to */
   const char *zDestDb,                  /* Name of database within pDestDb */
   sqlite3* pSrcDb,                      /* Database connection to read from */
@@ -68047,7 +68132,6 @@
     p->isAttached = 0;
 
     if( 0==p->pSrc || 0==p->pDest 
-     || setDestPgsz(p)==SQLITE_NOMEM 
      || checkReadTransaction(pDestDb, p->pDest)!=SQLITE_OK 
      ){
       /* One (or both) of the named databases did not exist or an OOM
@@ -68203,7 +68287,7 @@
 /*
 ** Copy nPage pages from the source b-tree to the destination.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage){
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage){
   int rc;
   int destMode;       /* Destination journal mode */
   int pgszSrc = 0;    /* Source page size */
@@ -68235,14 +68319,6 @@
       rc = SQLITE_OK;
     }
 
-    /* Lock the destination database, if it is not locked already. */
-    if( SQLITE_OK==rc && p->bDestLocked==0
-     && SQLITE_OK==(rc = sqlite3BtreeBeginTrans(p->pDest, 2)) 
-    ){
-      p->bDestLocked = 1;
-      sqlite3BtreeGetMeta(p->pDest, BTREE_SCHEMA_VERSION, &p->iDestSchema);
-    }
-
     /* If there is no open read-transaction on the source database, open
     ** one now. If a transaction is opened here, then it will be closed
     ** before this function exits.
@@ -68252,6 +68328,24 @@
       bCloseTrans = 1;
     }
 
+    /* If the destination database has not yet been locked (i.e. if this
+    ** is the first call to backup_step() for the current backup operation),
+    ** try to set its page size to the same as the source database. This
+    ** is especially important on ZipVFS systems, as in that case it is
+    ** not possible to create a database file that uses one page size by
+    ** writing to it with another.  */
+    if( p->bDestLocked==0 && rc==SQLITE_OK && setDestPgsz(p)==SQLITE_NOMEM ){
+      rc = SQLITE_NOMEM;
+    }
+
+    /* Lock the destination database, if it is not locked already. */
+    if( SQLITE_OK==rc && p->bDestLocked==0
+     && SQLITE_OK==(rc = sqlite3BtreeBeginTrans(p->pDest, 2)) 
+    ){
+      p->bDestLocked = 1;
+      sqlite3BtreeGetMeta(p->pDest, BTREE_SCHEMA_VERSION, &p->iDestSchema);
+    }
+
     /* Do not allow backup if the destination database is in WAL mode
     ** and the page sizes are different between source and destination */
     pgszSrc = sqlite3BtreeGetPageSize(p->pSrc);
@@ -68447,7 +68541,7 @@
 /*
 ** Release all resources associated with an sqlite3_backup* handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p){
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p){
   sqlite3_backup **pp;                 /* Ptr to head of pagers backup list */
   sqlite3 *pSrcDb;                     /* Source database connection */
   int rc;                              /* Value to return */
@@ -68499,7 +68593,7 @@
 ** Return the number of pages still to be backed up as of the most recent
 ** call to sqlite3_backup_step().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p){
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( p==0 ){
     (void)SQLITE_MISUSE_BKPT;
@@ -68513,7 +68607,7 @@
 ** Return the total number of pages in the source database as of the most 
 ** recent call to sqlite3_backup_step().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p){
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( p==0 ){
     (void)SQLITE_MISUSE_BKPT;
@@ -68840,18 +68934,18 @@
 ** Return SQLITE_OK on success or SQLITE_NOMEM if malloc fails.
 */
 SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem *pMem){
-  int f;
   assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
   assert( (pMem->flags&MEM_RowSet)==0 );
-  ExpandBlob(pMem);
-  f = pMem->flags;
-  if( (f&(MEM_Str|MEM_Blob)) && (pMem->szMalloc==0 || pMem->z!=pMem->zMalloc) ){
-    if( sqlite3VdbeMemGrow(pMem, pMem->n + 2, 1) ){
-      return SQLITE_NOMEM_BKPT;
+  if( (pMem->flags & (MEM_Str|MEM_Blob))!=0 ){
+    if( ExpandBlob(pMem) ) return SQLITE_NOMEM;
+    if( pMem->szMalloc==0 || pMem->z!=pMem->zMalloc ){
+      if( sqlite3VdbeMemGrow(pMem, pMem->n + 2, 1) ){
+        return SQLITE_NOMEM_BKPT;
+      }
+      pMem->z[pMem->n] = 0;
+      pMem->z[pMem->n+1] = 0;
+      pMem->flags |= MEM_Term;
     }
-    pMem->z[pMem->n] = 0;
-    pMem->z[pMem->n+1] = 0;
-    pMem->flags |= MEM_Term;
   }
   pMem->flags &= ~MEM_Ephem;
 #ifdef SQLITE_DEBUG
@@ -68867,25 +68961,24 @@
 */
 #ifndef SQLITE_OMIT_INCRBLOB
 SQLITE_PRIVATE int sqlite3VdbeMemExpandBlob(Mem *pMem){
-  if( pMem->flags & MEM_Zero ){
-    int nByte;
-    assert( pMem->flags&MEM_Blob );
-    assert( (pMem->flags&MEM_RowSet)==0 );
-    assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
+  int nByte;
+  assert( pMem->flags & MEM_Zero );
+  assert( pMem->flags&MEM_Blob );
+  assert( (pMem->flags&MEM_RowSet)==0 );
+  assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
 
-    /* Set nByte to the number of bytes required to store the expanded blob. */
-    nByte = pMem->n + pMem->u.nZero;
-    if( nByte<=0 ){
-      nByte = 1;
-    }
-    if( sqlite3VdbeMemGrow(pMem, nByte, 1) ){
-      return SQLITE_NOMEM_BKPT;
-    }
-
-    memset(&pMem->z[pMem->n], 0, pMem->u.nZero);
-    pMem->n += pMem->u.nZero;
-    pMem->flags &= ~(MEM_Zero|MEM_Term);
+  /* Set nByte to the number of bytes required to store the expanded blob. */
+  nByte = pMem->n + pMem->u.nZero;
+  if( nByte<=0 ){
+    nByte = 1;
   }
+  if( sqlite3VdbeMemGrow(pMem, nByte, 1) ){
+    return SQLITE_NOMEM_BKPT;
+  }
+
+  memset(&pMem->z[pMem->n], 0, pMem->u.nZero);
+  pMem->n += pMem->u.nZero;
+  pMem->flags &= ~(MEM_Zero|MEM_Term);
   return SQLITE_OK;
 }
 #endif
@@ -68945,6 +69038,7 @@
 
 
   if( sqlite3VdbeMemClearAndResize(pMem, nByte) ){
+    pMem->enc = 0;
     return SQLITE_NOMEM_BKPT;
   }
 
@@ -69226,7 +69320,7 @@
     }
   }
   assert( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))!=0 );
-  pMem->flags &= ~(MEM_Str|MEM_Blob);
+  pMem->flags &= ~(MEM_Str|MEM_Blob|MEM_Zero);
   return SQLITE_OK;
 }
 
@@ -69244,7 +69338,7 @@
       if( (pMem->flags & MEM_Blob)==0 ){
         sqlite3ValueApplyAffinity(pMem, SQLITE_AFF_TEXT, encoding);
         assert( pMem->flags & MEM_Str || pMem->db->mallocFailed );
-        MemSetTypeFlag(pMem, MEM_Blob);
+        if( pMem->flags & MEM_Str ) MemSetTypeFlag(pMem, MEM_Blob);
       }else{
         pMem->flags &= ~(MEM_TypeMask&~MEM_Blob);
       }
@@ -69669,9 +69763,6 @@
   assert( (pVal->flags & (MEM_Null))==0 );
   if( pVal->flags & (MEM_Blob|MEM_Str) ){
     pVal->flags |= MEM_Str;
-    if( pVal->flags & MEM_Zero ){
-      sqlite3VdbeMemExpandBlob(pVal);
-    }
     if( pVal->enc != (enc & ~SQLITE_UTF16_ALIGNED) ){
       sqlite3VdbeChangeEncoding(pVal, enc & ~SQLITE_UTF16_ALIGNED);
     }
@@ -69924,10 +70015,7 @@
   const char *zNeg = "";
   int rc = SQLITE_OK;
 
-  if( !pExpr ){
-    *ppVal = 0;
-    return SQLITE_OK;
-  }
+  assert( pExpr!=0 );
   while( (op = pExpr->op)==TK_UPLUS || op==TK_SPAN ) pExpr = pExpr->pLeft;
   if( NEVER(op==TK_REGISTER) ) op = pExpr->op2;
 
@@ -70051,7 +70139,7 @@
   u8 affinity,              /* Affinity to use */
   sqlite3_value **ppVal     /* Write the new value here */
 ){
-  return valueFromExpr(db, pExpr, enc, affinity, ppVal, 0);
+  return pExpr ? valueFromExpr(db, pExpr, enc, affinity, ppVal, 0) : 0;
 }
 
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
@@ -70171,9 +70259,9 @@
 ** structures intended to be compared against sample index keys stored 
 ** in the sqlite_stat4 table.
 **
-** A single call to this function attempts to populates field iVal (leftmost 
-** is 0 etc.) of the unpacked record with a value extracted from expression
-** pExpr. Extraction of values is possible if:
+** A single call to this function populates zero or more fields of the
+** record starting with field iVal (fields are numbered from left to
+** right starting with 0). A single field is populated if:
 **
 **  * (pExpr==0). In this case the value is assumed to be an SQL NULL,
 **
@@ -70182,11 +70270,15 @@
 **  * The sqlite3ValueFromExpr() function is able to extract a value 
 **    from the expression (i.e. the expression is a literal value).
 **
-** If a value can be extracted, the affinity passed as the 5th argument
-** is applied to it before it is copied into the UnpackedRecord. Output
-** parameter *pbOk is set to true if a value is extracted, or false 
-** otherwise.
+** Or, if pExpr is a TK_VECTOR, one field is populated for each of the
+** vector components that match either of the two latter criteria listed
+** above.
 **
+** Before any value is appended to the record, the affinity of the 
+** corresponding column within index pIdx is applied to it. Before
+** this function returns, output parameter *pnExtract is set to the
+** number of values appended to the record.
+**
 ** When this function is called, *ppRec must either point to an object
 ** allocated by an earlier call to this function, or must be NULL. If it
 ** is NULL and a value can be successfully extracted, a new UnpackedRecord
@@ -70201,22 +70293,33 @@
   Index *pIdx,                    /* Index being probed */
   UnpackedRecord **ppRec,         /* IN/OUT: Probe record */
   Expr *pExpr,                    /* The expression to extract a value from */
-  u8 affinity,                    /* Affinity to use */
+  int nElem,                      /* Maximum number of values to append */
   int iVal,                       /* Array element to populate */
-  int *pbOk                       /* OUT: True if value was extracted */
+  int *pnExtract                  /* OUT: Values appended to the record */
 ){
-  int rc;
-  sqlite3_value *pVal = 0;
-  struct ValueNewStat4Ctx alloc;
+  int rc = SQLITE_OK;
+  int nExtract = 0;
 
-  alloc.pParse = pParse;
-  alloc.pIdx = pIdx;
-  alloc.ppRec = ppRec;
-  alloc.iVal = iVal;
+  if( pExpr==0 || pExpr->op!=TK_SELECT ){
+    int i;
+    struct ValueNewStat4Ctx alloc;
 
-  rc = stat4ValueFromExpr(pParse, pExpr, affinity, &alloc, &pVal);
-  assert( pVal==0 || pVal->db==pParse->db );
-  *pbOk = (pVal!=0);
+    alloc.pParse = pParse;
+    alloc.pIdx = pIdx;
+    alloc.ppRec = ppRec;
+
+    for(i=0; i<nElem; i++){
+      sqlite3_value *pVal = 0;
+      Expr *pElem = (pExpr ? sqlite3VectorFieldSubexpr(pExpr, i) : 0);
+      u8 aff = sqlite3IndexColumnAffinity(pParse->db, pIdx, iVal+i);
+      alloc.iVal = iVal+i;
+      rc = stat4ValueFromExpr(pParse, pElem, aff, &alloc, &pVal);
+      if( !pVal ) break;
+      nExtract++;
+    }
+  }
+
+  *pnExtract = nExtract;
   return rc;
 }
 
@@ -70379,8 +70482,9 @@
 SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(Parse *pParse){
   sqlite3 *db = pParse->db;
   Vdbe *p;
-  p = sqlite3DbMallocZero(db, sizeof(Vdbe) );
+  p = sqlite3DbMallocRawNN(db, sizeof(Vdbe) );
   if( p==0 ) return 0;
+  memset(&p->aOp, 0, sizeof(Vdbe)-offsetof(Vdbe,aOp));
   p->db = db;
   if( db->pVdbe ){
     db->pVdbe->pPrev = p;
@@ -70542,9 +70646,8 @@
   if( p->db->flags & SQLITE_VdbeAddopTrace ){
     int jj, kk;
     Parse *pParse = p->pParse;
-    for(jj=kk=0; jj<SQLITE_N_COLCACHE; jj++){
+    for(jj=kk=0; jj<pParse->nColCache; jj++){
       struct yColCache *x = pParse->aColCache + jj;
-      if( x->iLevel>pParse->iCacheLevel || x->iReg==0 ) continue;
       printf(" r[%d]={%d:%d}", x->iReg, x->iTable, x->iColumn);
       kk++;
     }
@@ -70732,7 +70835,6 @@
   if( p->aLabel ){
     p->aLabel[j] = v->nOp;
   }
-  p->iFixedOp = v->nOp - 1;
 }
 
 /*
@@ -71123,15 +71225,15 @@
   sqlite3VdbeGetOp(p,addr)->p3 = val;
 }
 SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe *p, u8 p5){
-  if( !p->db->mallocFailed ) p->aOp[p->nOp-1].p5 = p5;
+  assert( p->nOp>0 || p->db->mallocFailed );
+  if( p->nOp>0 ) p->aOp[p->nOp-1].p5 = p5;
 }
 
 /*
 ** Change the P2 operand of instruction addr so that it points to
 ** the address of the next instruction to be coded.
 */
 SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe *p, int addr){
-  p->pParse->iFixedOp = p->nOp - 1;
   sqlite3VdbeChangeP2(p, addr, p->nOp);
 }
 
@@ -71254,7 +71356,7 @@
 ** then remove it.  Return true if and only if an opcode was removed.
 */
 SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe *p, u8 op){
-  if( (p->nOp-1)>(p->pParse->iFixedOp) && p->aOp[p->nOp-1].opcode==op ){
+  if( p->nOp>0 && p->aOp[p->nOp-1].opcode==op ){
     return sqlite3VdbeChangeToNoop(p, p->nOp-1);
   }else{
     return 0;
@@ -71452,12 +71554,21 @@
   const char *zSynopsis;
   int nOpName;
   int ii, jj;
+  char zAlt[50];
   zOpName = sqlite3OpcodeName(pOp->opcode);
   nOpName = sqlite3Strlen30(zOpName);
   if( zOpName[nOpName+1] ){
     int seenCom = 0;
     char c;
     zSynopsis = zOpName += nOpName + 1;
+    if( strncmp(zSynopsis,"IF ",3)==0 ){
+      if( pOp->p5 & SQLITE_STOREP2 ){
+        sqlite3_snprintf(sizeof(zAlt), zAlt, "r[P2] = (%s)", zSynopsis+3);
+      }else{
+        sqlite3_snprintf(sizeof(zAlt), zAlt, "if %s goto P2", zSynopsis+3);
+      }
+      zSynopsis = zAlt;
+    }
     for(ii=jj=0; jj<nTemp-1 && (c = zSynopsis[ii])!=0; ii++){
       if( c=='P' ){
         c = zSynopsis[++ii];
@@ -71809,6 +71920,21 @@
 #endif
 
 /*
+** Initialize an array of N Mem element.
+*/
+static void initMemArray(Mem *p, int N, sqlite3 *db, u16 flags){
+  while( (N--)>0 ){
+    p->db = db;
+    p->flags = flags;
+    p->szMalloc = 0;
+#ifdef SQLITE_DEBUG
+    p->pScopyFrom = 0;
+#endif
+    p++;
+  }
+}
+
+/*
 ** Release an array of N Mem elements
 */
 static void releaseMemArray(Mem *p, int N){
@@ -72019,6 +72145,7 @@
     pMem->flags = MEM_Str|MEM_Term;
     zP4 = displayP4(pOp, pMem->z, pMem->szMalloc);
     if( zP4!=pMem->z ){
+      pMem->n = 0;
       sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0);
     }else{
       assert( pMem->z!=0 );
@@ -72161,7 +72288,7 @@
   int i;
 #endif
   assert( p!=0 );
-  assert( p->magic==VDBE_MAGIC_INIT );
+  assert( p->magic==VDBE_MAGIC_INIT || p->magic==VDBE_MAGIC_RESET );
 
   /* There should be at least one opcode.
   */
@@ -72218,7 +72345,6 @@
   int nMem;                      /* Number of VM memory registers */
   int nCursor;                   /* Number of cursors required */
   int nArg;                      /* Number of arguments in subprograms */
-  int nOnce;                     /* Number of OP_Once instructions */
   int n;                         /* Loop counter */
   struct ReusableSpace x;        /* Reusable bulk memory */
 
@@ -72233,8 +72359,6 @@
   nMem = pParse->nMem;
   nCursor = pParse->nTab;
   nArg = pParse->nMaxArg;
-  nOnce = pParse->nOnce;
-  if( nOnce==0 ) nOnce = 1; /* Ensure at least one byte in p->aOnceFlag[] */
   
   /* Each cursor uses a memory cell.  The first cursor (cursor 0) can
   ** use aMem[0] which is not otherwise used by the VDBE program.  Allocate
@@ -72253,10 +72377,7 @@
   assert( EIGHT_BYTE_ALIGNMENT(x.pSpace) );
   x.nFree = ROUNDDOWN8(pParse->szOpAlloc - n);  /* Bytes of unused memory */
   assert( x.nFree>=0 );
-  if( x.nFree>0 ){
-    memset(x.pSpace, 0, x.nFree);
-    assert( EIGHT_BYTE_ALIGNMENT(&x.pSpace[x.nFree]) );
-  }
+  assert( EIGHT_BYTE_ALIGNMENT(&x.pSpace[x.nFree]) );
 
   resolveP2Values(p, &nArg);
   p->usesStmtJournal = (u8)(pParse->isMultiWrite && pParse->mayAbort);
@@ -72281,36 +72402,34 @@
     p->aVar = allocSpace(&x, p->aVar, nVar*sizeof(Mem));
     p->apArg = allocSpace(&x, p->apArg, nArg*sizeof(Mem*));
     p->apCsr = allocSpace(&x, p->apCsr, nCursor*sizeof(VdbeCursor*));
-    p->aOnceFlag = allocSpace(&x, p->aOnceFlag, nOnce);
 #ifdef SQLITE_ENABLE_STMT_SCANSTATUS
     p->anExec = allocSpace(&x, p->anExec, p->nOp*sizeof(i64));
 #endif
     if( x.nNeeded==0 ) break;
-    x.pSpace = p->pFree = sqlite3DbMallocZero(db, x.nNeeded);
+    x.pSpace = p->pFree = sqlite3DbMallocRawNN(db, x.nNeeded);
     x.nFree = x.nNeeded;
   }while( !db->mallocFailed );
 
-  p->nCursor = nCursor;
-  p->nOnceFlag = nOnce;
-  if( p->aVar ){
-    p->nVar = (ynVar)nVar;
-    for(n=0; n<nVar; n++){
-      p->aVar[n].flags = MEM_Null;
-      p->aVar[n].db = db;
-    }
-  }
   p->nzVar = pParse->nzVar;
   p->azVar = pParse->azVar;
   pParse->nzVar =  0;
   pParse->azVar = 0;
-  if( p->aMem ){
+  p->explain = pParse->explain;
+  if( db->mallocFailed ){
+    p->nVar = 0;
+    p->nCursor = 0;
+    p->nMem = 0;
+  }else{
+    p->nCursor = nCursor;
+    p->nVar = (ynVar)nVar;
+    initMemArray(p->aVar, nVar, db, MEM_Null);
     p->nMem = nMem;
-    for(n=0; n<nMem; n++){
-      p->aMem[n].flags = MEM_Undefined;
-      p->aMem[n].db = db;
-    }
+    initMemArray(p->aMem, nMem, db, MEM_Undefined);
+    memset(p->apCsr, 0, nCursor*sizeof(VdbeCursor*));
+#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
+    memset(p->anExec, 0, p->nOp*sizeof(i64));
+#endif
   }
-  p->explain = pParse->explain;
   sqlite3VdbeRewind(p);
 }
 
@@ -72379,8 +72498,6 @@
 #ifdef SQLITE_ENABLE_STMT_SCANSTATUS
   v->anExec = pFrame->anExec;
 #endif
-  v->aOnceFlag = pFrame->aOnceFlag;
-  v->nOnceFlag = pFrame->nOnceFlag;
   v->aOp = pFrame->aOp;
   v->nOp = pFrame->nOp;
   v->aMem = pFrame->aMem;
@@ -72464,13 +72581,9 @@
   sqlite3DbFree(db, p->aColName);
   n = nResColumn*COLNAME_N;
   p->nResColumn = (u16)nResColumn;
-  p->aColName = pColName = (Mem*)sqlite3DbMallocZero(db, sizeof(Mem)*n );
+  p->aColName = pColName = (Mem*)sqlite3DbMallocRawNN(db, sizeof(Mem)*n );
   if( p->aColName==0 ) return;
-  while( n-- > 0 ){
-    pColName->flags = MEM_Null;
-    pColName->db = p->db;
-    pColName++;
-  }
+  initMemArray(p->aColName, n, p->db, MEM_Null);
 }
 
 /*
@@ -72921,7 +73034,6 @@
   if( db->mallocFailed ){
     p->rc = SQLITE_NOMEM_BKPT;
   }
-  if( p->aOnceFlag ) memset(p->aOnceFlag, 0, p->nOnceFlag);
   closeAllCursors(p);
   if( p->magic!=VDBE_MAGIC_RUN ){
     return SQLITE_OK;
@@ -73233,7 +73345,7 @@
   }
 #endif
   p->iCurrentTime = 0;
-  p->magic = VDBE_MAGIC_INIT;
+  p->magic = VDBE_MAGIC_RESET;
   return p->rc & db->errMask;
 }
  
@@ -73297,19 +73409,21 @@
   SubProgram *pSub, *pNext;
   int i;
   assert( p->db==0 || p->db==db );
-  releaseMemArray(p->aVar, p->nVar);
   releaseMemArray(p->aColName, p->nResColumn*COLNAME_N);
   for(pSub=p->pProgram; pSub; pSub=pNext){
     pNext = pSub->pNext;
     vdbeFreeOpArray(db, pSub->aOp, pSub->nOp);
     sqlite3DbFree(db, pSub);
   }
-  for(i=p->nzVar-1; i>=0; i--) sqlite3DbFree(db, p->azVar[i]);
-  sqlite3DbFree(db, p->azVar);
+  if( p->magic!=VDBE_MAGIC_INIT ){
+    releaseMemArray(p->aVar, p->nVar);
+    for(i=p->nzVar-1; i>=0; i--) sqlite3DbFree(db, p->azVar[i]);
+    sqlite3DbFree(db, p->azVar);
+    sqlite3DbFree(db, p->pFree);
+  }
   vdbeFreeOpArray(db, p->aOp, p->nOp);
   sqlite3DbFree(db, p->aColName);
   sqlite3DbFree(db, p->zSql);
-  sqlite3DbFree(db, p->pFree);
 #ifdef SQLITE_ENABLE_STMT_SCANSTATUS
   for(i=0; i<p->nScan; i++){
     sqlite3DbFree(db, p->aScan[i].zName);
@@ -74066,14 +74180,48 @@
 }
 
 /*
+** The input pBlob is guaranteed to be a Blob that is not marked
+** with MEM_Zero.  Return true if it could be a zero-blob.
+*/
+static int isAllZero(const char *z, int n){
+  int i;
+  for(i=0; i<n; i++){
+    if( z[i] ) return 0;
+  }
+  return 1;
+}
+
+/*
 ** Compare two blobs.  Return negative, zero, or positive if the first
 ** is less than, equal to, or greater than the second, respectively.
 ** If one blob is a prefix of the other, then the shorter is the lessor.
 */
 static SQLITE_NOINLINE int sqlite3BlobCompare(const Mem *pB1, const Mem *pB2){
-  int c = memcmp(pB1->z, pB2->z, pB1->n>pB2->n ? pB2->n : pB1->n);
+  int c;
+  int n1 = pB1->n;
+  int n2 = pB2->n;
+
+  /* It is possible to have a Blob value that has some non-zero content
+  ** followed by zero content.  But that only comes up for Blobs formed
+  ** by the OP_MakeRecord opcode, and such Blobs never get passed into
+  ** sqlite3MemCompare(). */
+  assert( (pB1->flags & MEM_Zero)==0 || n1==0 );
+  assert( (pB2->flags & MEM_Zero)==0 || n2==0 );
+
+  if( (pB1->flags|pB2->flags) & MEM_Zero ){
+    if( pB1->flags & pB2->flags & MEM_Zero ){
+      return pB1->u.nZero - pB2->u.nZero;
+    }else if( pB1->flags & MEM_Zero ){
+      if( !isAllZero(pB2->z, pB2->n) ) return -1;
+      return pB1->u.nZero - n2;
+    }else{
+      if( !isAllZero(pB1->z, pB1->n) ) return +1;
+      return n1 - pB2->u.nZero;
+    }
+  }
+  c = memcmp(pB1->z, pB2->z, n1>n2 ? n2 : n1);
   if( c ) return c;
-  return pB1->n - pB2->n;
+  return n1 - n2;
 }
 
 /*
@@ -74379,6 +74527,7 @@
 
     /* RHS is a blob */
     else if( pRhs->flags & MEM_Blob ){
+      assert( (pRhs->flags & MEM_Zero)==0 || pRhs->n==0 );
       getVarint32(&aKey1[idx1], serial_type);
       testcase( serial_type==12 );
       if( serial_type<12 || (serial_type & 0x01) ){
@@ -74390,6 +74539,12 @@
         if( (d1+nStr) > (unsigned)nKey1 ){
           pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT;
           return 0;                /* Corruption */
+        }else if( pRhs->flags & MEM_Zero ){
+          if( !isAllZero((const char*)&aKey1[d1],nStr) ){
+            rc = 1;
+          }else{
+            rc = nStr - pRhs->u.nZero;
+          }
         }else{
           int nCmp = MIN(nStr, pRhs->n);
           rc = memcmp(&aKey1[d1], pRhs->z, nCmp);
@@ -74460,7 +74615,7 @@
   int res;
   u32 y;
   u64 x;
-  i64 v = pPKey2->aMem[0].u.i;
+  i64 v;
   i64 lhs;
 
   vdbeAssertFieldCountWithinLimits(nKey1, pKey1, pPKey2->pKeyInfo);
@@ -74519,6 +74674,7 @@
       return sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2);
   }
 
+  v = pPKey2->aMem[0].u.i;
   if( v>lhs ){
     res = pPKey2->r1;
   }else if( v<lhs ){
@@ -74969,7 +75125,7 @@
 ** collating sequences are registered or if an authorizer function is
 ** added or changed.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_expired(sqlite3_stmt *pStmt){
   Vdbe *p = (Vdbe*)pStmt;
   return p==0 || p->expired;
 }
@@ -75038,7 +75194,7 @@
 ** This routine sets the error code and string returned by
 ** sqlite3_errcode(), sqlite3_errmsg() and sqlite3_errmsg16().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt){
   int rc;
   if( pStmt==0 ){
     /* IMPLEMENTATION-OF: R-57228-12904 Invoking sqlite3_finalize() on a NULL
@@ -75065,7 +75221,7 @@
 ** This routine sets the error code and string returned by
 ** sqlite3_errcode(), sqlite3_errmsg() and sqlite3_errmsg16().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt){
   int rc;
   if( pStmt==0 ){
     rc = SQLITE_OK;
@@ -75086,7 +75242,7 @@
 /*
 ** Set all the parameters in the compiled SQL statement to NULL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt *pStmt){
   int i;
   int rc = SQLITE_OK;
   Vdbe *p = (Vdbe*)pStmt;
@@ -75110,10 +75266,10 @@
 ** The following routines extract information from a Mem or sqlite3_value
 ** structure.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value *pVal){
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value *pVal){
   Mem *p = (Mem*)pVal;
   if( p->flags & (MEM_Blob|MEM_Str) ){
-    if( sqlite3VdbeMemExpandBlob(p)!=SQLITE_OK ){
+    if( ExpandBlob(p)!=SQLITE_OK ){
       assert( p->flags==MEM_Null && p->z==0 );
       return 0;
     }
@@ -75123,44 +75279,44 @@
     return sqlite3_value_text(pVal);
   }
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_bytes(sqlite3_value *pVal){
   return sqlite3ValueBytes(pVal, SQLITE_UTF8);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value *pVal){
   return sqlite3ValueBytes(pVal, SQLITE_UTF16NATIVE);
 }
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value *pVal){
+SQLITE_API double sqlite3_value_double(sqlite3_value *pVal){
   return sqlite3VdbeRealValue((Mem*)pVal);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_int(sqlite3_value *pVal){
   return (int)sqlite3VdbeIntValue((Mem*)pVal);
 }
-SQLITE_API sqlite_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value *pVal){
+SQLITE_API sqlite_int64 sqlite3_value_int64(sqlite3_value *pVal){
   return sqlite3VdbeIntValue((Mem*)pVal);
 }
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value *pVal){
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value *pVal){
   Mem *pMem = (Mem*)pVal;
   return ((pMem->flags & MEM_Subtype) ? pMem->eSubtype : 0);
 }
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value *pVal){
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value *pVal){
   return (const unsigned char *)sqlite3ValueText(pVal, SQLITE_UTF8);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value* pVal){
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value* pVal){
   return sqlite3ValueText(pVal, SQLITE_UTF16NATIVE);
 }
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value *pVal){
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value *pVal){
   return sqlite3ValueText(pVal, SQLITE_UTF16BE);
 }
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value *pVal){
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value *pVal){
   return sqlite3ValueText(pVal, SQLITE_UTF16LE);
 }
 #endif /* SQLITE_OMIT_UTF16 */
 /* EVIDENCE-OF: R-12793-43283 Every value in SQLite has one of five
 ** fundamental datatypes: 64-bit signed integer 64-bit IEEE floating
 ** point number string BLOB NULL
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value* pVal){
+SQLITE_API int sqlite3_value_type(sqlite3_value* pVal){
   static const u8 aType[] = {
      SQLITE_BLOB,     /* 0x00 */
      SQLITE_NULL,     /* 0x01 */
@@ -75200,7 +75356,7 @@
 
 /* Make a copy of an sqlite3_value object
 */
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value *pOrig){
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value *pOrig){
   sqlite3_value *pNew;
   if( pOrig==0 ) return 0;
   pNew = sqlite3_malloc( sizeof(*pNew) );
@@ -75223,7 +75379,7 @@
 /* Destroy an sqlite3_value object previously obtained from
 ** sqlite3_value_dup().
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value *pOld){
+SQLITE_API void sqlite3_value_free(sqlite3_value *pOld){
   sqlite3ValueFree(pOld);
 }
   
@@ -75266,7 +75422,7 @@
   if( pCtx ) sqlite3_result_error_toobig(pCtx);
   return SQLITE_TOOBIG;
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(
+SQLITE_API void sqlite3_result_blob(
   sqlite3_context *pCtx, 
   const void *z, 
   int n, 
@@ -75276,7 +75432,7 @@
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   setResultStrOrError(pCtx, z, n, 0, xDel);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(
+SQLITE_API void sqlite3_result_blob64(
   sqlite3_context *pCtx, 
   const void *z, 
   sqlite3_uint64 n,
@@ -75290,43 +75446,43 @@
     setResultStrOrError(pCtx, z, (int)n, 0, xDel);
   }
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context *pCtx, double rVal){
+SQLITE_API void sqlite3_result_double(sqlite3_context *pCtx, double rVal){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemSetDouble(pCtx->pOut, rVal);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){
+SQLITE_API void sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   pCtx->isError = SQLITE_ERROR;
   pCtx->fErrorOrAux = 1;
   sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF8, SQLITE_TRANSIENT);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){
+SQLITE_API void sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   pCtx->isError = SQLITE_ERROR;
   pCtx->fErrorOrAux = 1;
   sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF16NATIVE, SQLITE_TRANSIENT);
 }
 #endif
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context *pCtx, int iVal){
+SQLITE_API void sqlite3_result_int(sqlite3_context *pCtx, int iVal){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemSetInt64(pCtx->pOut, (i64)iVal);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context *pCtx, i64 iVal){
+SQLITE_API void sqlite3_result_int64(sqlite3_context *pCtx, i64 iVal){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemSetInt64(pCtx->pOut, iVal);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context *pCtx){
+SQLITE_API void sqlite3_result_null(sqlite3_context *pCtx){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemSetNull(pCtx->pOut);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context *pCtx, unsigned int eSubtype){
+SQLITE_API void sqlite3_result_subtype(sqlite3_context *pCtx, unsigned int eSubtype){
   Mem *pOut = pCtx->pOut;
   assert( sqlite3_mutex_held(pOut->db->mutex) );
   pOut->eSubtype = eSubtype & 0xff;
   pOut->flags |= MEM_Subtype;
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(
+SQLITE_API void sqlite3_result_text(
   sqlite3_context *pCtx, 
   const char *z, 
   int n,
@@ -75335,7 +75491,7 @@
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   setResultStrOrError(pCtx, z, n, SQLITE_UTF8, xDel);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(
+SQLITE_API void sqlite3_result_text64(
   sqlite3_context *pCtx, 
   const char *z, 
   sqlite3_uint64 n,
@@ -75352,7 +75508,7 @@
   }
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(
+SQLITE_API void sqlite3_result_text16(
   sqlite3_context *pCtx, 
   const void *z, 
   int n, 
@@ -75361,7 +75517,7 @@
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   setResultStrOrError(pCtx, z, n, SQLITE_UTF16NATIVE, xDel);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(
+SQLITE_API void sqlite3_result_text16be(
   sqlite3_context *pCtx, 
   const void *z, 
   int n, 
@@ -75370,7 +75526,7 @@
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   setResultStrOrError(pCtx, z, n, SQLITE_UTF16BE, xDel);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(
+SQLITE_API void sqlite3_result_text16le(
   sqlite3_context *pCtx, 
   const void *z, 
   int n, 
@@ -75380,15 +75536,15 @@
   setResultStrOrError(pCtx, z, n, SQLITE_UTF16LE, xDel);
 }
 #endif /* SQLITE_OMIT_UTF16 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context *pCtx, sqlite3_value *pValue){
+SQLITE_API void sqlite3_result_value(sqlite3_context *pCtx, sqlite3_value *pValue){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemCopy(pCtx->pOut, pValue);
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context *pCtx, int n){
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context *pCtx, int n){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemSetZeroBlob(pCtx->pOut, n);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context *pCtx, u64 n){
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context *pCtx, u64 n){
   Mem *pOut = pCtx->pOut;
   assert( sqlite3_mutex_held(pOut->db->mutex) );
   if( n>(u64)pOut->db->aLimit[SQLITE_LIMIT_LENGTH] ){
@@ -75397,7 +75553,7 @@
   sqlite3VdbeMemSetZeroBlob(pCtx->pOut, (int)n);
   return SQLITE_OK;
 }
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){
+SQLITE_API void sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){
   pCtx->isError = errCode;
   pCtx->fErrorOrAux = 1;
 #ifdef SQLITE_DEBUG
@@ -75410,7 +75566,7 @@
 }
 
 /* Force an SQLITE_TOOBIG error. */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context *pCtx){
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context *pCtx){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   pCtx->isError = SQLITE_TOOBIG;
   pCtx->fErrorOrAux = 1;
@@ -75419,7 +75575,7 @@
 }
 
 /* An SQLITE_NOMEM error. */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context *pCtx){
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context *pCtx){
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
   sqlite3VdbeMemSetNull(pCtx->pOut);
   pCtx->isError = SQLITE_NOMEM_BKPT;
@@ -75443,7 +75599,7 @@
       nEntry = sqlite3PagerWalCallback(sqlite3BtreePager(pBt));
       sqlite3BtreeLeave(pBt);
       if( db->xWalCallback && nEntry>0 && rc==SQLITE_OK ){
-        rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zName, nEntry);
+        rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zDbSName, nEntry);
       }
     }
   }
@@ -75591,7 +75747,7 @@
 ** sqlite3Step() to do most of the work.  If a schema error occurs,
 ** call sqlite3Reprepare() and try again.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){
   int rc = SQLITE_OK;      /* Result from sqlite3Step() */
   int rc2 = SQLITE_OK;     /* Result from sqlite3Reprepare() */
   Vdbe *v = (Vdbe*)pStmt;  /* the prepared statement */
@@ -75642,7 +75798,7 @@
 ** Extract the user data from a sqlite3_context structure and return a
 ** pointer to it.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context *p){
+SQLITE_API void *sqlite3_user_data(sqlite3_context *p){
   assert( p && p->pFunc );
   return p->pFunc->pUserData;
 }
@@ -75657,7 +75813,7 @@
 ** sqlite3_create_function16() routines that originally registered the
 ** application defined function.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context *p){
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context *p){
   assert( p && p->pOut );
   return p->pOut->db;
 }
@@ -75733,7 +75889,7 @@
 ** context is allocated on the first call.  Subsequent calls return the
 ** same context that was returned on prior calls.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context *p, int nByte){
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context *p, int nByte){
   assert( p && p->pFunc && p->pFunc->xFinalize );
   assert( sqlite3_mutex_held(p->pOut->db->mutex) );
   testcase( nByte<0 );
@@ -75748,7 +75904,7 @@
 ** Return the auxiliary data pointer, if any, for the iArg'th argument to
 ** the user-function defined by pCtx.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){
   AuxData *pAuxData;
 
   assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
@@ -75769,7 +75925,7 @@
 ** argument to the user-function defined by pCtx. Any previous value is
 ** deleted by calling the delete function specified when it was set.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(
+SQLITE_API void sqlite3_set_auxdata(
   sqlite3_context *pCtx, 
   int iArg, 
   void *pAux, 
@@ -75824,7 +75980,7 @@
 ** implementations should keep their own counts within their aggregate
 ** context.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context *p){
+SQLITE_API int sqlite3_aggregate_count(sqlite3_context *p){
   assert( p && p->pMem && p->pFunc && p->pFunc->xFinalize );
   return p->pMem->n;
 }
@@ -75833,7 +75989,7 @@
 /*
 ** Return the number of columns in the result set for the statement pStmt.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt){
   Vdbe *pVm = (Vdbe *)pStmt;
   return pVm ? pVm->nResColumn : 0;
 }
@@ -75842,7 +75998,7 @@
 ** Return the number of values available from the current row of the
 ** currently executing statement pStmt.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt){
   Vdbe *pVm = (Vdbe *)pStmt;
   if( pVm==0 || pVm->pResultSet==0 ) return 0;
   return pVm->nResColumn;
@@ -75896,14 +76052,13 @@
   Mem *pOut;
 
   pVm = (Vdbe *)pStmt;
-  if( pVm && pVm->pResultSet!=0 && i<pVm->nResColumn && i>=0 ){
-    sqlite3_mutex_enter(pVm->db->mutex);
+  if( pVm==0 ) return (Mem*)columnNullValue();
+  assert( pVm->db );
+  sqlite3_mutex_enter(pVm->db->mutex);
+  if( pVm->pResultSet!=0 && i<pVm->nResColumn && i>=0 ){
     pOut = &pVm->pResultSet[i];
   }else{
-    if( pVm && ALWAYS(pVm->db) ){
-      sqlite3_mutex_enter(pVm->db->mutex);
-      sqlite3Error(pVm->db, SQLITE_RANGE);
-    }
+    sqlite3Error(pVm->db, SQLITE_RANGE);
     pOut = (Mem*)columnNullValue();
   }
   return pOut;
@@ -75936,6 +76091,8 @@
   */
   Vdbe *p = (Vdbe *)pStmt;
   if( p ){
+    assert( p->db!=0 );
+    assert( sqlite3_mutex_held(p->db->mutex) );
     p->rc = sqlite3ApiExit(p->db, p->rc);
     sqlite3_mutex_leave(p->db->mutex);
   }
@@ -75945,7 +76102,7 @@
 ** The following routines are used to access elements of the current row
 ** in the result set.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt *pStmt, int i){
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt *pStmt, int i){
   const void *val;
   val = sqlite3_value_blob( columnMem(pStmt,i) );
   /* Even though there is no encoding conversion, value_blob() might
@@ -75955,37 +76112,37 @@
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt *pStmt, int i){
   int val = sqlite3_value_bytes( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt *pStmt, int i){
   int val = sqlite3_value_bytes16( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt *pStmt, int i){
+SQLITE_API double sqlite3_column_double(sqlite3_stmt *pStmt, int i){
   double val = sqlite3_value_double( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_int(sqlite3_stmt *pStmt, int i){
   int val = sqlite3_value_int( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API sqlite_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt *pStmt, int i){
+SQLITE_API sqlite_int64 sqlite3_column_int64(sqlite3_stmt *pStmt, int i){
   sqlite_int64 val = sqlite3_value_int64( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt *pStmt, int i){
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt *pStmt, int i){
   const unsigned char *val = sqlite3_value_text( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt *pStmt, int i){
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt *pStmt, int i){
   Mem *pOut = columnMem(pStmt, i);
   if( pOut->flags&MEM_Static ){
     pOut->flags &= ~MEM_Static;
@@ -75995,13 +76152,13 @@
   return (sqlite3_value *)pOut;
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt *pStmt, int i){
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt *pStmt, int i){
   const void *val = sqlite3_value_text16( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return val;
 }
 #endif /* SQLITE_OMIT_UTF16 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_type(sqlite3_stmt *pStmt, int i){
   int iType = sqlite3_value_type( columnMem(pStmt,i) );
   columnMallocFailure(pStmt);
   return iType;
@@ -76065,12 +76222,12 @@
 ** Return the name of the Nth column of the result set returned by SQL
 ** statement pStmt.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_NAME);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_NAME);
 }
@@ -76090,12 +76247,12 @@
 ** Return the column declaration type (if applicable) of the 'i'th column
 ** of the result set of SQL statement pStmt.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_DECLTYPE);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_DECLTYPE);
 }
@@ -76108,12 +76265,12 @@
 ** NULL is returned if the result column is an expression or constant or
 ** anything else which is not an unambiguous reference to a database column.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_DATABASE);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_DATABASE);
 }
@@ -76124,12 +76281,12 @@
 ** NULL is returned if the result column is an expression or constant or
 ** anything else which is not an unambiguous reference to a database column.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_TABLE);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_TABLE);
 }
@@ -76140,12 +76297,12 @@
 ** NULL is returned if the result column is an expression or constant or
 ** anything else which is not an unambiguous reference to a database column.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_COLUMN);
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt *pStmt, int N){
   return columnName(
       pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_COLUMN);
 }
@@ -76246,7 +76403,7 @@
 /*
 ** Bind a blob value to an SQL statement variable.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(
+SQLITE_API int sqlite3_bind_blob(
   sqlite3_stmt *pStmt, 
   int i, 
   const void *zData, 
@@ -76258,7 +76415,7 @@
 #endif
   return bindText(pStmt, i, zData, nData, xDel, 0);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(
+SQLITE_API int sqlite3_bind_blob64(
   sqlite3_stmt *pStmt, 
   int i, 
   const void *zData, 
@@ -76272,7 +76429,7 @@
     return bindText(pStmt, i, zData, (int)nData, xDel, 0);
   }
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt *pStmt, int i, double rValue){
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt *pStmt, int i, double rValue){
   int rc;
   Vdbe *p = (Vdbe *)pStmt;
   rc = vdbeUnbind(p, i);
@@ -76282,10 +76439,10 @@
   }
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt *p, int i, int iValue){
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt *p, int i, int iValue){
   return sqlite3_bind_int64(p, i, (i64)iValue);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt *pStmt, int i, sqlite_int64 iValue){
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt *pStmt, int i, sqlite_int64 iValue){
   int rc;
   Vdbe *p = (Vdbe *)pStmt;
   rc = vdbeUnbind(p, i);
@@ -76295,7 +76452,7 @@
   }
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt *pStmt, int i){
   int rc;
   Vdbe *p = (Vdbe*)pStmt;
   rc = vdbeUnbind(p, i);
@@ -76304,7 +76461,7 @@
   }
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text( 
+SQLITE_API int sqlite3_bind_text( 
   sqlite3_stmt *pStmt, 
   int i, 
   const char *zData, 
@@ -76313,7 +76470,7 @@
 ){
   return bindText(pStmt, i, zData, nData, xDel, SQLITE_UTF8);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64( 
+SQLITE_API int sqlite3_bind_text64( 
   sqlite3_stmt *pStmt, 
   int i, 
   const char *zData, 
@@ -76330,7 +76487,7 @@
   }
 }
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(
+SQLITE_API int sqlite3_bind_text16(
   sqlite3_stmt *pStmt, 
   int i, 
   const void *zData, 
@@ -76340,7 +76497,7 @@
   return bindText(pStmt, i, zData, nData, xDel, SQLITE_UTF16NATIVE);
 }
 #endif /* SQLITE_OMIT_UTF16 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt *pStmt, int i, const sqlite3_value *pValue){
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt *pStmt, int i, const sqlite3_value *pValue){
   int rc;
   switch( sqlite3_value_type((sqlite3_value*)pValue) ){
     case SQLITE_INTEGER: {
@@ -76371,7 +76528,7 @@
   }
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt *pStmt, int i, int n){
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt *pStmt, int i, int n){
   int rc;
   Vdbe *p = (Vdbe *)pStmt;
   rc = vdbeUnbind(p, i);
@@ -76381,7 +76538,7 @@
   }
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt *pStmt, int i, sqlite3_uint64 n){
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt *pStmt, int i, sqlite3_uint64 n){
   int rc;
   Vdbe *p = (Vdbe *)pStmt;
   sqlite3_mutex_enter(p->db->mutex);
@@ -76400,7 +76557,7 @@
 ** Return the number of wildcards that can be potentially bound to.
 ** This routine is added to support DBD::SQLite.  
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt *pStmt){
   Vdbe *p = (Vdbe*)pStmt;
   return p ? p->nVar : 0;
 }
@@ -76411,7 +76568,7 @@
 **
 ** The result is always UTF-8.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt *pStmt, int i){
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt *pStmt, int i){
   Vdbe *p = (Vdbe*)pStmt;
   if( p==0 || i<1 || i>p->nzVar ){
     return 0;
@@ -76439,7 +76596,7 @@
   }
   return 0;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt *pStmt, const char *zName){
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt *pStmt, const char *zName){
   return sqlite3VdbeParameterIndex((Vdbe*)pStmt, zName, sqlite3Strlen30(zName));
 }
 
@@ -76473,7 +76630,7 @@
 ** an SQLITE_ERROR is returned.  Nothing else can go wrong, so otherwise
 ** SQLITE_OK is returned.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt *pFromStmt, sqlite3_stmt *pToStmt){
+SQLITE_API int sqlite3_transfer_bindings(sqlite3_stmt *pFromStmt, sqlite3_stmt *pToStmt){
   Vdbe *pFrom = (Vdbe*)pFromStmt;
   Vdbe *pTo = (Vdbe*)pToStmt;
   if( pFrom->nVar!=pTo->nVar ){
@@ -76495,24 +76652,24 @@
 ** the first argument to the sqlite3_prepare() that was used to create
 ** the statement in the first place.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt *pStmt){
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt *pStmt){
   return pStmt ? ((Vdbe*)pStmt)->db : 0;
 }
 
 /*
 ** Return true if the prepared statement is guaranteed to not modify the
 ** database.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
   return pStmt ? ((Vdbe*)pStmt)->readOnly : 1;
 }
 
 /*
 ** Return true if the prepared statement is in need of being reset.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt *pStmt){
   Vdbe *v = (Vdbe*)pStmt;
-  return v!=0 && v->pc>=0 && v->magic==VDBE_MAGIC_RUN;
+  return v!=0 && v->magic==VDBE_MAGIC_RUN && v->pc>=0;
 }
 
 /*
@@ -76521,7 +76678,7 @@
 ** prepared statement for the database connection.  Return NULL if there
 ** are no more.
 */
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt){
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt){
   sqlite3_stmt *pNext;
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(pDb) ){
@@ -76542,7 +76699,7 @@
 /*
 ** Return the value of a status counter for a prepared statement
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt *pStmt, int op, int resetFlag){
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt *pStmt, int op, int resetFlag){
   Vdbe *pVdbe = (Vdbe*)pStmt;
   u32 v;
 #ifdef SQLITE_ENABLE_API_ARMOR
@@ -76559,7 +76716,7 @@
 /*
 ** Return the SQL associated with a prepared statement
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt){
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt){
   Vdbe *p = (Vdbe *)pStmt;
   return p ? p->zSql : 0;
 }
@@ -76573,7 +76730,7 @@
 ** The SQLITE_TRACE_SIZE_LIMIT puts an upper bound on the size of
 ** expanded bound parameters.
 */
-SQLITE_API char *SQLITE_STDCALL sqlite3_expanded_sql(sqlite3_stmt *pStmt){
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt){
 #ifdef SQLITE_OMIT_TRACE
   return 0;
 #else
@@ -76615,7 +76772,7 @@
 ** This function is called from within a pre-update callback to retrieve
 ** a field of the row currently being updated or deleted.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_preupdate_old(sqlite3 *db, int iIdx, sqlite3_value **ppValue){
+SQLITE_API int sqlite3_preupdate_old(sqlite3 *db, int iIdx, sqlite3_value **ppValue){
   PreUpdate *p = db->pPreUpdate;
   int rc = SQLITE_OK;
 
@@ -76670,7 +76827,7 @@
 ** This function is called from within a pre-update callback to retrieve
 ** the number of columns in the row being updated, deleted or inserted.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_preupdate_count(sqlite3 *db){
+SQLITE_API int sqlite3_preupdate_count(sqlite3 *db){
   PreUpdate *p = db->pPreUpdate;
   return (p ? p->keyinfo.nField : 0);
 }
@@ -76688,7 +76845,7 @@
 ** For the purposes of the previous paragraph, a foreign key CASCADE, SET NULL
 ** or SET DEFAULT action is considered a trigger.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_preupdate_depth(sqlite3 *db){
+SQLITE_API int sqlite3_preupdate_depth(sqlite3 *db){
   PreUpdate *p = db->pPreUpdate;
   return (p ? p->v->nFrame : 0);
 }
@@ -76699,7 +76856,7 @@
 ** This function is called from within a pre-update callback to retrieve
 ** a field of the row currently being updated or inserted.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_preupdate_new(sqlite3 *db, int iIdx, sqlite3_value **ppValue){
+SQLITE_API int sqlite3_preupdate_new(sqlite3 *db, int iIdx, sqlite3_value **ppValue){
   PreUpdate *p = db->pPreUpdate;
   int rc = SQLITE_OK;
   Mem *pMem;
@@ -76719,7 +76876,7 @@
     UnpackedRecord *pUnpack = p->pNewUnpacked;
     if( !pUnpack ){
       Mem *pData = &p->v->aMem[p->iNewReg];
-      rc = sqlite3VdbeMemExpandBlob(pData);
+      rc = ExpandBlob(pData);
       if( rc!=SQLITE_OK ) goto preupdate_new_out;
       pUnpack = vdbeUnpackRecord(&p->keyinfo, pData->n, pData->z);
       if( !pUnpack ){
@@ -76773,7 +76930,7 @@
 /*
 ** Return status data for a single loop within query pStmt.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
   sqlite3_stmt *pStmt,            /* Prepared statement being queried */
   int idx,                        /* Index of loop to report on */
   int iScanStatusOp,              /* Which metric to return */
@@ -76832,7 +76989,7 @@
 /*
 ** Zero all counters associated with the sqlite3_stmt_scanstatus() data.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt *pStmt){
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt *pStmt){
   Vdbe *p = (Vdbe*)pStmt;
   memset(p->anExec, 0, p->nOp * sizeof(i64));
 }
@@ -77359,7 +77516,7 @@
 ** is appropriate.  But only do the conversion if it is possible without
 ** loss of information and return the revised type of the argument.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value *pVal){
   int eType = sqlite3_value_type(pVal);
   if( eType==SQLITE_TEXT ){
     Mem *pMem = (Mem*)pVal;
@@ -77701,7 +77858,7 @@
   sqlite3 *db = p->db;       /* The database */
   u8 resetSchemaOnFault = 0; /* Reset schema after an error if positive */
   u8 encoding = ENC(db);     /* The database encoding */
-  int iCompare = 0;          /* Result of last OP_Compare operation */
+  int iCompare = 0;          /* Result of last comparison */
   unsigned nVmStep = 0;      /* Number of virtual machine steps */
 #ifndef SQLITE_OMIT_PROGRESS_CALLBACK
   unsigned nProgressLimit = 0;/* Invoke xProgress() when nVmStep reaches this */
@@ -78033,7 +78190,7 @@
 }
 
 /* Opcode:  HaltIfNull  P1 P2 P3 P4 P5
-** Synopsis:  if r[P3]=null halt
+** Synopsis: if r[P3]=null halt
 **
 ** Check the value in register P3.  If it is NULL then Halt using
 ** parameter P1, P2, and P4 as if this were a Halt instruction.  If the
@@ -78246,7 +78403,7 @@
 }
 
 /* Opcode: Null P1 P2 P3 * *
-** Synopsis:  r[P2..P3]=NULL
+** Synopsis: r[P2..P3]=NULL
 **
 ** Write a NULL into registers P2.  If P3 greater than P2, then also write
 ** NULL into register P3 and every register in between P2 and P3.  If P3
@@ -78264,18 +78421,20 @@
   cnt = pOp->p3-pOp->p2;
   assert( pOp->p3<=(p->nMem+1 - p->nCursor) );
   pOut->flags = nullFlag = pOp->p1 ? (MEM_Null|MEM_Cleared) : MEM_Null;
+  pOut->n = 0;
   while( cnt>0 ){
     pOut++;
     memAboutToChange(p, pOut);
     sqlite3VdbeMemSetNull(pOut);
     pOut->flags = nullFlag;
+    pOut->n = 0;
     cnt--;
   }
   break;
 }
 
 /* Opcode: SoftNull P1 * * * *
-** Synopsis:  r[P1]=NULL
+** Synopsis: r[P1]=NULL
 **
 ** Set register P1 to have the value NULL as seen by the OP_MakeRecord
 ** instruction, but do not free any string or blob memory associated with
@@ -78328,7 +78487,7 @@
 }
 
 /* Opcode: Move P1 P2 P3 * *
-** Synopsis:  r[P2@P3]=r[P1@P3]
+** Synopsis: r[P2@P3]=r[P1@P3]
 **
 ** Move the P3 values in register P1..P1+P3-1 over into
 ** registers P2..P2+P3-1.  Registers P1..P1+P3-1 are
@@ -78438,7 +78597,7 @@
 }
 
 /* Opcode: ResultRow P1 P2 * * *
-** Synopsis:  output=r[P1@P2]
+** Synopsis: output=r[P1@P2]
 **
 ** The registers P1 through P1+P2-1 contain a single row of
 ** results. This opcode causes the sqlite3_step() call to terminate
@@ -78571,37 +78730,37 @@
 }
 
 /* Opcode: Add P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P1]+r[P2]
+** Synopsis: r[P3]=r[P1]+r[P2]
 **
 ** Add the value in register P1 to the value in register P2
 ** and store the result in register P3.
 ** If either input is NULL, the result is NULL.
 */
 /* Opcode: Multiply P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P1]*r[P2]
+** Synopsis: r[P3]=r[P1]*r[P2]
 **
 **
 ** Multiply the value in register P1 by the value in register P2
 ** and store the result in register P3.
 ** If either input is NULL, the result is NULL.
 */
 /* Opcode: Subtract P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P2]-r[P1]
+** Synopsis: r[P3]=r[P2]-r[P1]
 **
 ** Subtract the value in register P1 from the value in register P2
 ** and store the result in register P3.
 ** If either input is NULL, the result is NULL.
 */
 /* Opcode: Divide P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P2]/r[P1]
+** Synopsis: r[P3]=r[P2]/r[P1]
 **
 ** Divide the value in register P1 by the value in register P2
 ** and store the result in register P3 (P3=P2/P1). If the value in 
 ** register P1 is zero, then the result is NULL. If either input is 
 ** NULL, the result is NULL.
 */
 /* Opcode: Remainder P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P2]%r[P1]
+** Synopsis: r[P3]=r[P2]%r[P1]
 **
 ** Compute the remainder after integer register P2 is divided by 
 ** register P1 and store the result in register P3. 
@@ -78834,29 +78993,29 @@
 }
 
 /* Opcode: BitAnd P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P1]&r[P2]
+** Synopsis: r[P3]=r[P1]&r[P2]
 **
 ** Take the bit-wise AND of the values in register P1 and P2 and
 ** store the result in register P3.
 ** If either input is NULL, the result is NULL.
 */
 /* Opcode: BitOr P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P1]|r[P2]
+** Synopsis: r[P3]=r[P1]|r[P2]
 **
 ** Take the bit-wise OR of the values in register P1 and P2 and
 ** store the result in register P3.
 ** If either input is NULL, the result is NULL.
 */
 /* Opcode: ShiftLeft P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P2]<<r[P1]
+** Synopsis: r[P3]=r[P2]<<r[P1]
 **
 ** Shift the integer value in register P2 to the left by the
 ** number of bits specified by the integer in register P1.
 ** Store the result in register P3.
 ** If either input is NULL, the result is NULL.
 */
 /* Opcode: ShiftRight P1 P2 P3 * *
-** Synopsis:  r[P3]=r[P2]>>r[P1]
+** Synopsis: r[P3]=r[P2]>>r[P1]
 **
 ** Shift the integer value in register P2 to the right by the
 ** number of bits specified by the integer in register P1.
@@ -78916,7 +79075,7 @@
 }
 
 /* Opcode: AddImm  P1 P2 * * *
-** Synopsis:  r[P1]=r[P1]+P2
+** Synopsis: r[P1]=r[P1]+P2
 ** 
 ** Add the constant P2 to the value in register P1.
 ** The result is always an integer.
@@ -79008,16 +79167,13 @@
 }
 #endif /* SQLITE_OMIT_CAST */
 
-/* Opcode: Lt P1 P2 P3 P4 P5
-** Synopsis: if r[P1]<r[P3] goto P2
+/* Opcode: Eq P1 P2 P3 P4 P5
+** Synopsis: IF r[P3]==r[P1]
 **
-** Compare the values in register P1 and P3.  If reg(P3)<reg(P1) then
-** jump to address P2.  
+** Compare the values in register P1 and P3.  If reg(P3)==reg(P1) then
+** jump to address P2.  Or if the SQLITE_STOREP2 flag is set in P5, then
+** store the result of comparison in register P2.
 **
-** If the SQLITE_JUMPIFNULL bit of P5 is set and either reg(P1) or
-** reg(P3) is NULL then take the jump.  If the SQLITE_JUMPIFNULL 
-** bit is clear then fall through if either operand is NULL.
-**
 ** The SQLITE_AFF_MASK portion of P5 must be an affinity character -
 ** SQLITE_AFF_TEXT, SQLITE_AFF_INTEGER, and so forth. An attempt is made 
 ** to coerce both inputs according to this affinity before the
@@ -79030,61 +79186,78 @@
 ** the values are compared. If both values are blobs then memcmp() is
 ** used to determine the results of the comparison.  If both values
 ** are text, then the appropriate collating function specified in
-** P4 is  used to do the comparison.  If P4 is not specified then
+** P4 is used to do the comparison.  If P4 is not specified then
 ** memcmp() is used to compare text string.  If both values are
 ** numeric, then a numeric comparison is used. If the two values
 ** are of different types, then numbers are considered less than
 ** strings and strings are considered less than blobs.
 **
-** If the SQLITE_STOREP2 bit of P5 is set, then do not jump.  Instead,
-** store a boolean result (either 0, or 1, or NULL) in register P2.
+** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
+** true or false and is never NULL.  If both operands are NULL then the result
+** of comparison is true.  If either operand is NULL then the result is false.
+** If neither operand is NULL the result is the same as it would be if
+** the SQLITE_NULLEQ flag were omitted from P5.
 **
-** If the SQLITE_NULLEQ bit is set in P5, then NULL values are considered
-** equal to one another, provided that they do not have their MEM_Cleared
-** bit set.
+** If both SQLITE_STOREP2 and SQLITE_KEEPNULL flags are set then the
+** content of r[P2] is only changed if the new value is NULL or 0 (false).
+** In other words, a prior r[P2] value will not be overwritten by 1 (true).
 */
 /* Opcode: Ne P1 P2 P3 P4 P5
-** Synopsis: if r[P1]!=r[P3] goto P2
+** Synopsis: IF r[P3]!=r[P1]
 **
-** This works just like the Lt opcode except that the jump is taken if
-** the operands in registers P1 and P3 are not equal.  See the Lt opcode for
+** This works just like the Eq opcode except that the jump is taken if
+** the operands in registers P1 and P3 are not equal.  See the Eq opcode for
 ** additional information.
 **
-** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
-** true or false and is never NULL.  If both operands are NULL then the result
-** of comparison is false.  If either operand is NULL then the result is true.
-** If neither operand is NULL the result is the same as it would be if
-** the SQLITE_NULLEQ flag were omitted from P5.
+** If both SQLITE_STOREP2 and SQLITE_KEEPNULL flags are set then the
+** content of r[P2] is only changed if the new value is NULL or 1 (true).
+** In other words, a prior r[P2] value will not be overwritten by 0 (false).
 */
-/* Opcode: Eq P1 P2 P3 P4 P5
-** Synopsis: if r[P1]==r[P3] goto P2
+/* Opcode: Lt P1 P2 P3 P4 P5
+** Synopsis: IF r[P3]<r[P1]
 **
-** This works just like the Lt opcode except that the jump is taken if
-** the operands in registers P1 and P3 are equal.
-** See the Lt opcode for additional information.
+** Compare the values in register P1 and P3.  If reg(P3)<reg(P1) then
+** jump to address P2.  Or if the SQLITE_STOREP2 flag is set in P5 store
+** the result of comparison (0 or 1 or NULL) into register P2.
 **
-** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
-** true or false and is never NULL.  If both operands are NULL then the result
-** of comparison is true.  If either operand is NULL then the result is false.
-** If neither operand is NULL the result is the same as it would be if
-** the SQLITE_NULLEQ flag were omitted from P5.
+** If the SQLITE_JUMPIFNULL bit of P5 is set and either reg(P1) or
+** reg(P3) is NULL then the take the jump.  If the SQLITE_JUMPIFNULL 
+** bit is clear then fall through if either operand is NULL.
+**
+** The SQLITE_AFF_MASK portion of P5 must be an affinity character -
+** SQLITE_AFF_TEXT, SQLITE_AFF_INTEGER, and so forth. An attempt is made 
+** to coerce both inputs according to this affinity before the
+** comparison is made. If the SQLITE_AFF_MASK is 0x00, then numeric
+** affinity is used. Note that the affinity conversions are stored
+** back into the input registers P1 and P3.  So this opcode can cause
+** persistent changes to registers P1 and P3.
+**
+** Once any conversions have taken place, and neither value is NULL, 
+** the values are compared. If both values are blobs then memcmp() is
+** used to determine the results of the comparison.  If both values
+** are text, then the appropriate collating function specified in
+** P4 is  used to do the comparison.  If P4 is not specified then
+** memcmp() is used to compare text string.  If both values are
+** numeric, then a numeric comparison is used. If the two values
+** are of different types, then numbers are considered less than
+** strings and strings are considered less than blobs.
 */
 /* Opcode: Le P1 P2 P3 P4 P5
-** Synopsis: if r[P1]<=r[P3] goto P2
+** Synopsis: IF r[P3]<=r[P1]
 **
 ** This works just like the Lt opcode except that the jump is taken if
 ** the content of register P3 is less than or equal to the content of
 ** register P1.  See the Lt opcode for additional information.
 */
 /* Opcode: Gt P1 P2 P3 P4 P5
-** Synopsis: if r[P1]>r[P3] goto P2
+** Synopsis: IF r[P3]>r[P1]
 **
 ** This works just like the Lt opcode except that the jump is taken if
 ** the content of register P3 is greater than the content of
 ** register P1.  See the Lt opcode for additional information.
 */
 /* Opcode: Ge P1 P2 P3 P4 P5
-** Synopsis: if r[P1]>=r[P3] goto P2
+** Synopsis: IF r[P3]>=r[P1]
 **
 ** This works just like the Lt opcode except that the jump is taken if
 ** the content of register P3 is greater than or equal to the content of
@@ -79096,7 +79269,7 @@
 case OP_Le:               /* same as TK_LE, jump, in1, in3 */
 case OP_Gt:               /* same as TK_GT, jump, in1, in3 */
 case OP_Ge: {             /* same as TK_GE, jump, in1, in3 */
-  int res;            /* Result of the comparison of pIn1 against pIn3 */
+  int res, res2;      /* Result of the comparison of pIn1 against pIn3 */
   char affinity;      /* Affinity to use for comparison */
   u16 flags1;         /* Copy of initial value of pIn1->flags */
   u16 flags3;         /* Copy of initial value of pIn3->flags */
@@ -79119,9 +79292,9 @@
        && (flags3&MEM_Null)!=0
        && (flags3&MEM_Cleared)==0
       ){
-        res = 0;  /* Results are equal */
+        res = 0;  /* Operands are equal */
       }else{
-        res = 1;  /* Results are not equal */
+        res = 1;  /* Operands are not equal */
       }
     }else{
       /* SQLITE_NULLEQ is clear and at least one operand is NULL,
@@ -79130,6 +79303,7 @@
       */
       if( pOp->p5 & SQLITE_STOREP2 ){
         pOut = &aMem[pOp->p2];
+        iCompare = 1;    /* Operands are not equal */
         memAboutToChange(p, pOut);
         MemSetTypeFlag(pOut, MEM_Null);
         REGISTER_TRACE(pOp->p2, pOut);
@@ -79148,20 +79322,29 @@
       if( (flags1 | flags3)&MEM_Str ){
         if( (flags1 & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
           applyNumericAffinity(pIn1,0);
+          testcase( flags3!=pIn3->flags ); /* Possible if pIn1==pIn3 */
           flags3 = pIn3->flags;
         }
         if( (flags3 & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
           applyNumericAffinity(pIn3,0);
         }
       }
+      /* Handle the common case of integer comparison here, as an
+      ** optimization, to avoid a call to sqlite3MemCompare() */
+      if( (pIn1->flags & pIn3->flags & MEM_Int)!=0 ){
+        if( pIn3->u.i > pIn1->u.i ){ res = +1; goto compare_op; }
+        if( pIn3->u.i < pIn1->u.i ){ res = -1; goto compare_op; }
+        res = 0;
+        goto compare_op;
+      }
     }else if( affinity==SQLITE_AFF_TEXT ){
       if( (flags1 & MEM_Str)==0 && (flags1 & (MEM_Int|MEM_Real))!=0 ){
         testcase( pIn1->flags & MEM_Int );
         testcase( pIn1->flags & MEM_Real );
         sqlite3VdbeMemStringify(pIn1, encoding, 1);
         testcase( (flags1&MEM_Dyn) != (pIn1->flags&MEM_Dyn) );
         flags1 = (pIn1->flags & ~MEM_TypeMask) | (flags1 & MEM_TypeMask);
-        flags3 = pIn3->flags;
+        assert( pIn1!=pIn3 );
       }
       if( (flags3 & MEM_Str)==0 && (flags3 & (MEM_Int|MEM_Real))!=0 ){
         testcase( pIn3->flags & MEM_Int );
@@ -79172,23 +79355,16 @@
       }
     }
     assert( pOp->p4type==P4_COLLSEQ || pOp->p4.pColl==0 );
-    if( flags1 & MEM_Zero ){
-      sqlite3VdbeMemExpandBlob(pIn1);
-      flags1 &= ~MEM_Zero;
-    }
-    if( flags3 & MEM_Zero ){
-      sqlite3VdbeMemExpandBlob(pIn3);
-      flags3 &= ~MEM_Zero;
-    }
     res = sqlite3MemCompare(pIn3, pIn1, pOp->p4.pColl);
   }
+compare_op:
   switch( pOp->opcode ){
-    case OP_Eq:    res = res==0;     break;
-    case OP_Ne:    res = res!=0;     break;
-    case OP_Lt:    res = res<0;      break;
-    case OP_Le:    res = res<=0;     break;
-    case OP_Gt:    res = res>0;      break;
-    default:       res = res>=0;     break;
+    case OP_Eq:    res2 = res==0;     break;
+    case OP_Ne:    res2 = res;        break;
+    case OP_Lt:    res2 = res<0;      break;
+    case OP_Le:    res2 = res<=0;     break;
+    case OP_Gt:    res2 = res>0;      break;
+    default:       res2 = res>=0;     break;
   }
 
   /* Undo any changes made by applyAffinity() to the input registers. */
@@ -79199,19 +79375,55 @@
 
   if( pOp->p5 & SQLITE_STOREP2 ){
     pOut = &aMem[pOp->p2];
+    iCompare = res;
+    res2 = res2!=0;  /* For this path res2 must be exactly 0 or 1 */
+    if( (pOp->p5 & SQLITE_KEEPNULL)!=0 ){
+      /* The KEEPNULL flag prevents OP_Eq from overwriting a NULL with 1
+      ** and prevents OP_Ne from overwriting NULL with 0.  This flag
+      ** is only used in contexts where either:
+      **   (1) op==OP_Eq && (r[P2]==NULL || r[P2]==0)
+      **   (2) op==OP_Ne && (r[P2]==NULL || r[P2]==1)
+      ** Therefore it is not necessary to check the content of r[P2] for
+      ** NULL. */
+      assert( pOp->opcode==OP_Ne || pOp->opcode==OP_Eq );
+      assert( res2==0 || res2==1 );
+      testcase( res2==0 && pOp->opcode==OP_Eq );
+      testcase( res2==1 && pOp->opcode==OP_Eq );
+      testcase( res2==0 && pOp->opcode==OP_Ne );
+      testcase( res2==1 && pOp->opcode==OP_Ne );
+      if( (pOp->opcode==OP_Eq)==res2 ) break;
+    }
     memAboutToChange(p, pOut);
     MemSetTypeFlag(pOut, MEM_Int);
-    pOut->u.i = res;
+    pOut->u.i = res2;
     REGISTER_TRACE(pOp->p2, pOut);
   }else{
     VdbeBranchTaken(res!=0, (pOp->p5 & SQLITE_NULLEQ)?2:3);
-    if( res ){
+    if( res2 ){
       goto jump_to_p2;
     }
   }
   break;
 }
 
+/* Opcode: ElseNotEq * P2 * * *
+**
+** This opcode must immediately follow an OP_Lt or OP_Gt comparison operator.
+** If result of an OP_Eq comparison on the same two operands
+** would have be NULL or false (0), then then jump to P2. 
+** If the result of an OP_Eq comparison on the two previous operands
+** would have been true (1), then fall through.
+*/
+case OP_ElseNotEq: {       /* same as TK_ESCAPE, jump */
+  assert( pOp>aOp );
+  assert( pOp[-1].opcode==OP_Lt || pOp[-1].opcode==OP_Gt );
+  assert( pOp[-1].p5 & SQLITE_STOREP2 );
+  VdbeBranchTaken(iCompare!=0, 2);
+  if( iCompare!=0 ) goto jump_to_p2;
+  break;
+}
+
+
 /* Opcode: Permutation * * * P4 *
 **
 ** Set the permutation used by the OP_Compare operator to be the array
@@ -79407,22 +79619,18 @@
 
 /* Opcode: Once P1 P2 * * *
 **
-** Check the "once" flag number P1. If it is set, jump to instruction P2. 
-** Otherwise, set the flag and fall through to the next instruction.
-** In other words, this opcode causes all following opcodes up through P2
-** (but not including P2) to run just once and to be skipped on subsequent
-** times through the loop.
-**
-** All "once" flags are initially cleared whenever a prepared statement
-** first begins to run.
+** If the P1 value is equal to the P1 value on the OP_Init opcode at
+** instruction 0, then jump to P2.  If the two P1 values differ, then
+** set the P1 value on this opcode to equal the P1 value on the OP_Init
+** and fall through.
 */
 case OP_Once: {             /* jump */
-  assert( pOp->p1<p->nOnceFlag );
-  VdbeBranchTaken(p->aOnceFlag[pOp->p1]!=0, 2);
-  if( p->aOnceFlag[pOp->p1] ){
+  assert( p->aOp[0].opcode==OP_Init );
+  VdbeBranchTaken(p->aOp[0].p1==pOp->p1, 2);
+  if( p->aOp[0].p1==pOp->p1 ){
     goto jump_to_p2;
   }else{
-    p->aOnceFlag[pOp->p1] = 1;
+    pOp->p1 = p->aOp[0].p1;
   }
   break;
 }
@@ -79461,7 +79669,7 @@
 }
 
 /* Opcode: IsNull P1 P2 * * *
-** Synopsis:  if r[P1]==NULL goto P2
+** Synopsis: if r[P1]==NULL goto P2
 **
 ** Jump to P2 if the value in register P1 is NULL.
 */
@@ -79489,7 +79697,7 @@
 }
 
 /* Opcode: Column P1 P2 P3 P4 P5
-** Synopsis:  r[P3]=PX
+** Synopsis: r[P3]=PX
 **
 ** Interpret the data that cursor P1 points to as a structure built using
 ** the MakeRecord instruction.  (See the MakeRecord opcode for additional
@@ -80255,12 +80463,12 @@
     rc = sqlite3BtreeBeginTrans(pBt, pOp->p2);
     testcase( rc==SQLITE_BUSY_SNAPSHOT );
     testcase( rc==SQLITE_BUSY_RECOVERY );
-    if( (rc&0xff)==SQLITE_BUSY ){
-      p->pc = (int)(pOp - aOp);
-      p->rc = rc;
-      goto vdbe_return;
-    }
     if( rc!=SQLITE_OK ){
+      if( (rc&0xff)==SQLITE_BUSY ){
+        p->pc = (int)(pOp - aOp);
+        p->rc = rc;
+        goto vdbe_return;
+      }
       goto abort_due_to_error;
     }
 
@@ -80287,10 +80495,9 @@
     }
 
     /* Gather the schema version number for checking:
-    ** IMPLEMENTATION-OF: R-32195-19465 The schema version is used by SQLite
-    ** each time a query is executed to ensure that the internal cache of the
-    ** schema used when compiling the SQL query matches the schema of the
-    ** database against which the compiled query is actually executed.
+    ** IMPLEMENTATION-OF: R-03189-51135 As each SQL statement runs, the schema
+    ** version is checked to ensure that the schema has not changed since the
+    ** SQL statement was prepared.
     */
     sqlite3BtreeGetMeta(pBt, BTREE_SCHEMA_VERSION, (u32 *)&iMeta);
     iGen = db->aDb[pOp->p1].pSchema->iGeneration;
@@ -80951,7 +81158,6 @@
 #ifdef SQLITE_DEBUG
     { int i; for(i=0; i<r.nField; i++) assert( memIsValid(&r.aMem[i]) ); }
 #endif
-    ExpandBlob(r.aMem);
     r.eqSeen = 0;
     rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, &r, 0, 0, &res);
     if( rc!=SQLITE_OK ){
@@ -80999,7 +81205,6 @@
   }
   break;
 }
-  
 
 /* Opcode: Found P1 P2 P3 P4 *
 ** Synopsis: key=r[P3@P4]
@@ -81093,21 +81298,21 @@
     r.pKeyInfo = pC->pKeyInfo;
     r.nField = (u16)pOp->p4.i;
     r.aMem = pIn3;
+#ifdef SQLITE_DEBUG
     for(ii=0; ii<r.nField; ii++){
       assert( memIsValid(&r.aMem[ii]) );
-      ExpandBlob(&r.aMem[ii]);
-#ifdef SQLITE_DEBUG
+      assert( (r.aMem[ii].flags & MEM_Zero)==0 || r.aMem[ii].n==0 );
       if( ii ) REGISTER_TRACE(pOp->p3+ii, &r.aMem[ii]);
-#endif
     }
+#endif
     pIdxKey = &r;
   }else{
     pIdxKey = sqlite3VdbeAllocUnpackedRecord(
         pC->pKeyInfo, aTempRec, sizeof(aTempRec), &pFree
     );
     if( pIdxKey==0 ) goto no_mem;
     assert( pIn3->flags & MEM_Blob );
-    ExpandBlob(pIn3);
+    (void)ExpandBlob(pIn3);
     sqlite3VdbeRecordUnpack(pC->pKeyInfo, pIn3->n, pIn3->z, pIdxKey);
   }
   pIdxKey->default_rc = 0;
@@ -81432,7 +81637,7 @@
 ** for indices is OP_IdxInsert.
 */
 /* Opcode: InsertInt P1 P2 P3 P4 P5
-** Synopsis:  intkey=P3 data=r[P2]
+** Synopsis: intkey=P3 data=r[P2]
 **
 ** This works exactly like OP_Insert except that the key is the
 ** integer value P3, not the value of the integer stored in register P3.
@@ -81474,7 +81679,7 @@
   if( pOp->p4type==P4_TABLE && HAS_UPDATE_HOOK(db) ){
     assert( pC->isTable );
     assert( pC->iDb>=0 );
-    zDb = db->aDb[pC->iDb].zName;
+    zDb = db->aDb[pC->iDb].zDbSName;
     pTab = pOp->p4.pTab;
     assert( HasRowid(pTab) );
     op = ((pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT);
@@ -81548,7 +81753,7 @@
 ** P1 must not be pseudo-table.  It has to be a real table with
 ** multiple rows.
 **
-** If P4 is not NULL then it points to a Table struture. In this case either 
+** If P4 is not NULL then it points to a Table object. In this case either 
 ** the update or pre-update hook, or both, may be invoked. The P1 cursor must
 ** have been positioned using OP_NotFound prior to invoking this opcode in 
 ** this case. Specifically, if one is configured, the pre-update hook is 
@@ -81591,7 +81796,7 @@
   if( pOp->p4type==P4_TABLE && HAS_UPDATE_HOOK(db) ){
     assert( pC->iDb>=0 );
     assert( pOp->p4.pTab!=0 );
-    zDb = db->aDb[pC->iDb].zName;
+    zDb = db->aDb[pC->iDb].zDbSName;
     pTab = pOp->p4.pTab;
     if( (pOp->p5 & OPFLAG_SAVEPOSITION)!=0 && pC->isTable ){
       pC->movetoTarget = sqlite3BtreeIntegerKey(pC->uc.pCursor);
@@ -81663,7 +81868,7 @@
 }
 
 /* Opcode: SorterCompare P1 P2 P3 P4
-** Synopsis:  if key(P1)!=trim(r[P3],P4) goto P2
+** Synopsis: if key(P1)!=trim(r[P3],P4) goto P2
 **
 ** P1 is a sorter cursor. This instruction compares a prefix of the
 ** record blob in register P3 against a prefix of the entry that 
@@ -82139,9 +82344,6 @@
   }else{
     x.nKey = pIn2->n;
     x.pKey = pIn2->z;
-    x.nData = 0;
-    x.nZero = 0;
-    x.pData = 0;
     rc = sqlite3BtreeInsert(pC->uc.pCursor, &x, pOp->p3, 
         ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0)
         );
@@ -82190,7 +82392,7 @@
 }
 
 /* Opcode: Seek P1 * P3 P4 *
-** Synopsis:  Move P3 to P1.rowid
+** Synopsis: Move P3 to P1.rowid
 **
 ** P1 is an open index cursor and P3 is a cursor on the corresponding
 ** table.  This opcode does a deferred seek of the P3 table cursor
@@ -82561,7 +82763,7 @@
     initData.pzErrMsg = &p->zErrMsg;
     zSql = sqlite3MPrintf(db,
        "SELECT name, rootpage, sql FROM '%q'.%s WHERE %s ORDER BY rowid",
-       db->aDb[iDb].zName, zMaster, pOp->p4.z);
+       db->aDb[iDb].zDbSName, zMaster, pOp->p4.z);
     if( zSql==0 ){
       rc = SQLITE_NOMEM_BKPT;
     }else{
@@ -82697,7 +82899,7 @@
 #endif /* SQLITE_OMIT_INTEGRITY_CHECK */
 
 /* Opcode: RowSetAdd P1 P2 * * *
-** Synopsis:  rowset(P1)=r[P2]
+** Synopsis: rowset(P1)=r[P2]
 **
 ** Insert the integer value held by register P2 into a boolean index
 ** held in register P1.
@@ -82717,7 +82919,7 @@
 }
 
 /* Opcode: RowSetRead P1 P2 P3 * *
-** Synopsis:  r[P3]=rowset(P1)
+** Synopsis: r[P3]=rowset(P1)
 **
 ** Extract the smallest value from boolean index P1 and put that value into
 ** register P3.  Or, if boolean index P1 is initially empty, leave P3
@@ -82866,8 +83068,7 @@
     if( pProgram->nCsr==0 ) nMem++;
     nByte = ROUND8(sizeof(VdbeFrame))
               + nMem * sizeof(Mem)
-              + pProgram->nCsr * sizeof(VdbeCursor *)
-              + pProgram->nOnce * sizeof(u8);
+              + pProgram->nCsr * sizeof(VdbeCursor *);
     pFrame = sqlite3DbMallocZero(db, nByte);
     if( !pFrame ){
       goto no_mem;
@@ -82887,8 +83088,6 @@
     pFrame->aOp = p->aOp;
     pFrame->nOp = p->nOp;
     pFrame->token = pProgram->token;
-    pFrame->aOnceFlag = p->aOnceFlag;
-    pFrame->nOnceFlag = p->nOnceFlag;
 #ifdef SQLITE_ENABLE_STMT_SCANSTATUS
     pFrame->anExec = p->anExec;
 #endif
@@ -82922,13 +83121,10 @@
   p->apCsr = (VdbeCursor **)&aMem[p->nMem];
   p->aOp = aOp = pProgram->aOp;
   p->nOp = pProgram->nOp;
-  p->aOnceFlag = (u8 *)&p->apCsr[p->nCursor];
-  p->nOnceFlag = pProgram->nOnce;
 #ifdef SQLITE_ENABLE_STMT_SCANSTATUS
   p->anExec = 0;
 #endif
   pOp = &aOp[-1];
-  memset(p->aOnceFlag, 0, p->nOnceFlag);
 
   break;
 }
@@ -83390,15 +83586,14 @@
 #endif /* SQLITE_OMIT_PRAGMA */
 
 #if !defined(SQLITE_OMIT_VACUUM) && !defined(SQLITE_OMIT_ATTACH)
-/* Opcode: Vacuum * * * * *
+/* Opcode: Vacuum P1 * * * *
 **
-** Vacuum the entire database.  This opcode will cause other virtual
-** machines to be created and run.  It may not be called from within
-** a transaction.
+** Vacuum the entire database P1.  P1 is 0 for "main", and 2 or more
+** for an attached database.  The "temp" database may not be vacuumed.
 */
 case OP_Vacuum: {
   assert( p->readOnly==0 );
-  rc = sqlite3RunVacuum(&p->zErrMsg, db);
+  rc = sqlite3RunVacuum(&p->zErrMsg, db, pOp->p1);
   if( rc ) goto abort_due_to_error;
   break;
 }
@@ -83896,8 +84091,8 @@
 #endif
 
 
-/* Opcode: Init * P2 * P4 *
-** Synopsis:  Start at P2
+/* Opcode: Init P1 P2 * P4 *
+** Synopsis: Start at P2
 **
 ** Programs contain a single instance of this opcode as the very first
 ** opcode.
@@ -83907,9 +84102,13 @@
 ** Or if P4 is blank, use the string returned by sqlite3_sql().
 **
 ** If P2 is not zero, jump to instruction P2.
+**
+** Increment the value of P1 so that OP_Once opcodes will jump the
+** first time they are evaluated for this run.
 */
 case OP_Init: {          /* jump */
   char *zTrace;
+  int i;
 
   /* If the P4 argument is not NULL, then it must be an SQL comment string.
   ** The "--" string is broken up to prevent false-positives with srcck1.c.
@@ -83921,6 +84120,7 @@
   ** sqlite3_expanded_sql(P) otherwise.
   */
   assert( pOp->p4.z==0 || strncmp(pOp->p4.z, "-" "- ", 3)==0 );
+  assert( pOp==p->aOp );  /* Always instruction 0 */
 
 #ifndef SQLITE_OMIT_TRACE
   if( (db->mTrace & (SQLITE_TRACE_STMT|SQLITE_TRACE_LEGACY))!=0
@@ -83942,10 +84142,10 @@
 #ifdef SQLITE_USE_FCNTL_TRACE
   zTrace = (pOp->p4.z ? pOp->p4.z : p->zSql);
   if( zTrace ){
-    int i;
-    for(i=0; i<db->nDb; i++){
-      if( DbMaskTest(p->btreeMask, i)==0 ) continue;
-      sqlite3_file_control(db, db->aDb[i].zName, SQLITE_FCNTL_TRACE, zTrace);
+    int j;
+    for(j=0; j<db->nDb; j++){
+      if( DbMaskTest(p->btreeMask, j)==0 ) continue;
+      sqlite3_file_control(db, db->aDb[j].zDbSName, SQLITE_FCNTL_TRACE, zTrace);
     }
   }
 #endif /* SQLITE_USE_FCNTL_TRACE */
@@ -83957,8 +84157,15 @@
   }
 #endif /* SQLITE_DEBUG */
 #endif /* SQLITE_OMIT_TRACE */
-  if( pOp->p2 ) goto jump_to_p2;
-  break;
+  assert( pOp->p2>0 );
+  if( pOp->p1>=sqlite3GlobalConfig.iOnceResetThreshold ){
+    for(i=1; i<p->nOp; i++){
+      if( p->aOp[i].opcode==OP_Once ) p->aOp[i].p1 = 0;
+    }
+    pOp->p1 = 0;
+  }
+  pOp->p1++;
+  goto jump_to_p2;
 }
 
 #ifdef SQLITE_ENABLE_CURSOR_HINTS
@@ -84211,7 +84418,7 @@
 /*
 ** Open a blob handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
   sqlite3* db,            /* The database connection */
   const char *zDb,        /* The attached database containing the blob */
   const char *zTable,     /* The table containing the blob */
@@ -84281,7 +84488,7 @@
       goto blob_open_out;
     }
     pBlob->pTab = pTab;
-    pBlob->zDb = db->aDb[sqlite3SchemaToIndex(db, pTab->pSchema)].zName;
+    pBlob->zDb = db->aDb[sqlite3SchemaToIndex(db, pTab->pSchema)].zDbSName;
 
     /* Now search pTab for the exact column. */
     for(iCol=0; iCol<pTab->nCol; iCol++) {
@@ -84452,7 +84659,7 @@
 ** Close a blob handle that was previously created using
 ** sqlite3_blob_open().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *pBlob){
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *pBlob){
   Incrblob *p = (Incrblob *)pBlob;
   int rc;
   sqlite3 *db;
@@ -84545,14 +84752,14 @@
 /*
 ** Read data from a blob handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *pBlob, void *z, int n, int iOffset){
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *pBlob, void *z, int n, int iOffset){
   return blobReadWrite(pBlob, z, n, iOffset, sqlite3BtreeData);
 }
 
 /*
 ** Write data to a blob handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *pBlob, const void *z, int n, int iOffset){
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *pBlob, const void *z, int n, int iOffset){
   return blobReadWrite(pBlob, (void *)z, n, iOffset, sqlite3BtreePutData);
 }
 
@@ -84562,7 +84769,7 @@
 ** The Incrblob.nByte field is fixed for the lifetime of the Incrblob
 ** so no mutex is required for access.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *pBlob){
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *pBlob){
   Incrblob *p = (Incrblob *)pBlob;
   return (p && p->pStmt) ? p->nByte : 0;
 }
@@ -84577,7 +84784,7 @@
 ** subsequent calls to sqlite3_blob_xxx() functions (except blob_close()) 
 ** immediately return SQLITE_ABORT.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *pBlob, sqlite3_int64 iRow){
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *pBlob, sqlite3_int64 iRow){
   int rc;
   Incrblob *p = (Incrblob *)pBlob;
   sqlite3 *db;
@@ -87833,17 +88040,17 @@
   testcase( ExprHasProperty(pExpr, EP_TokenOnly) );
   testcase( ExprHasProperty(pExpr, EP_Reduced) );
   rc = pWalker->xExprCallback(pWalker, pExpr);
-  if( rc==WRC_Continue
-              && !ExprHasProperty(pExpr,EP_TokenOnly) ){
-    if( sqlite3WalkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort;
-    if( sqlite3WalkExpr(pWalker, pExpr->pRight) ) return WRC_Abort;
-    if( ExprHasProperty(pExpr, EP_xIsSelect) ){
-      if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort;
-    }else{
-      if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort;
-    }
+  if( rc || ExprHasProperty(pExpr,(EP_TokenOnly|EP_Leaf)) ){
+    return rc & WRC_Abort;
   }
-  return rc & WRC_Abort;
+  if( pExpr->pLeft && walkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort;
+  if( pExpr->pRight && walkExpr(pWalker, pExpr->pRight) ) return WRC_Abort;
+  if( ExprHasProperty(pExpr, EP_xIsSelect) ){
+    if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort;
+  }else if( pExpr->x.pList ){
+    if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort;
+  }
+  return WRC_Continue;
 }
 SQLITE_PRIVATE int sqlite3WalkExpr(Walker *pWalker, Expr *pExpr){
   return pExpr ? walkExpr(pWalker,pExpr) : WRC_Continue;
@@ -88177,8 +88384,8 @@
       zDb = 0;
     }else{
       for(i=0; i<db->nDb; i++){
-        assert( db->aDb[i].zName );
-        if( sqlite3StrICmp(db->aDb[i].zName,zDb)==0 ){
+        assert( db->aDb[i].zDbSName );
+        if( sqlite3StrICmp(db->aDb[i].zDbSName,zDb)==0 ){
           pSchema = db->aDb[i].pSchema;
           break;
         }
@@ -88579,7 +88786,6 @@
 
       /* if( pSrcList==0 ) break; */
       notValid(pParse, pNC, "the \".\" operator", NC_IdxExpr);
-      /*notValid(pParse, pNC, "the \".\" operator", NC_PartIdx|NC_IsCheck, 1);*/
       pRight = pExpr->pRight;
       if( pRight->op==TK_ID ){
         zDb = 0;
@@ -88602,14 +88808,12 @@
       int no_such_func = 0;       /* True if no such function exists */
       int wrong_num_args = 0;     /* True if wrong number of arguments */
       int is_agg = 0;             /* True if is an aggregate function */
-      int auth;                   /* Authorization to use the function */
       int nId;                    /* Number of characters in function name */
       const char *zId;            /* The function name. */
       FuncDef *pDef;              /* Information about the function */
       u8 enc = ENC(pParse->db);   /* The database encoding */
 
       assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
-      notValid(pParse, pNC, "functions", NC_PartIdx);
       zId = pExpr->u.zToken;
       nId = sqlite3Strlen30(zId);
       pDef = sqlite3FindFunction(pParse->db, zId, n, enc, 0);
@@ -88646,15 +88850,17 @@
           }             
         }
 #ifndef SQLITE_OMIT_AUTHORIZATION
-        auth = sqlite3AuthCheck(pParse, SQLITE_FUNCTION, 0, pDef->zName, 0);
-        if( auth!=SQLITE_OK ){
-          if( auth==SQLITE_DENY ){
-            sqlite3ErrorMsg(pParse, "not authorized to use function: %s",
-                                    pDef->zName);
-            pNC->nErr++;
+        {
+          int auth = sqlite3AuthCheck(pParse, SQLITE_FUNCTION, 0,pDef->zName,0);
+          if( auth!=SQLITE_OK ){
+            if( auth==SQLITE_DENY ){
+              sqlite3ErrorMsg(pParse, "not authorized to use function: %s",
+                                      pDef->zName);
+              pNC->nErr++;
+            }
+            pExpr->op = TK_NULL;
+            return WRC_Prune;
           }
-          pExpr->op = TK_NULL;
-          return WRC_Prune;
         }
 #endif
         if( pDef->funcFlags & (SQLITE_FUNC_CONSTANT|SQLITE_FUNC_SLOCHNG) ){
@@ -88667,7 +88873,8 @@
           /* Date/time functions that use 'now', and other functions like
           ** sqlite_version() that might change over time cannot be used
           ** in an index. */
-          notValid(pParse, pNC, "non-deterministic functions", NC_IdxExpr);
+          notValid(pParse, pNC, "non-deterministic functions",
+                   NC_IdxExpr|NC_PartIdx);
         }
       }
       if( is_agg && (pNC->ncFlags & NC_AllowAgg)==0 ){
@@ -88732,6 +88939,33 @@
       notValid(pParse, pNC, "parameters", NC_IsCheck|NC_PartIdx|NC_IdxExpr);
       break;
     }
+    case TK_EQ:
+    case TK_NE:
+    case TK_LT:
+    case TK_LE:
+    case TK_GT:
+    case TK_GE:
+    case TK_IS:
+    case TK_ISNOT: {
+      int nLeft, nRight;
+      if( pParse->db->mallocFailed ) break;
+      assert( pExpr->pRight!=0 );
+      assert( pExpr->pLeft!=0 );
+      nLeft = sqlite3ExprVectorSize(pExpr->pLeft);
+      nRight = sqlite3ExprVectorSize(pExpr->pRight);
+      if( nLeft!=nRight ){
+        testcase( pExpr->op==TK_EQ );
+        testcase( pExpr->op==TK_NE );
+        testcase( pExpr->op==TK_LT );
+        testcase( pExpr->op==TK_LE );
+        testcase( pExpr->op==TK_GT );
+        testcase( pExpr->op==TK_GE );
+        testcase( pExpr->op==TK_IS );
+        testcase( pExpr->op==TK_ISNOT );
+        sqlite3ErrorMsg(pParse, "row value misused");
+      }
+      break; 
+    }
   }
   return (pParse->nErr || pParse->db->mallocFailed) ? WRC_Abort : WRC_Continue;
 }
@@ -89474,7 +89708,19 @@
 */
 /* #include "sqliteInt.h" */
 
+/* Forward declarations */
+static void exprCodeBetween(Parse*,Expr*,int,void(*)(Parse*,Expr*,int,int),int);
+static int exprCodeVector(Parse *pParse, Expr *p, int *piToFree);
+
 /*
+** Return the affinity character for a single column of a table.
+*/
+SQLITE_PRIVATE char sqlite3TableColumnAffinity(Table *pTab, int iCol){
+  assert( iCol<pTab->nCol );
+  return iCol>=0 ? pTab->aCol[iCol].affinity : SQLITE_AFF_INTEGER;
+}
+
+/*
 ** Return the 'affinity' of the expression pExpr if any.
 **
 ** If pExpr is a column, a reference to a column via an 'AS' alias,
@@ -89499,22 +89745,22 @@
     assert( pExpr->flags&EP_xIsSelect );
     return sqlite3ExprAffinity(pExpr->x.pSelect->pEList->a[0].pExpr);
   }
+  if( op==TK_REGISTER ) op = pExpr->op2;
 #ifndef SQLITE_OMIT_CAST
   if( op==TK_CAST ){
     assert( !ExprHasProperty(pExpr, EP_IntValue) );
     return sqlite3AffinityType(pExpr->u.zToken, 0);
   }
 #endif
-  if( (op==TK_AGG_COLUMN || op==TK_COLUMN || op==TK_REGISTER) 
-   && pExpr->pTab!=0
-  ){
-    /* op==TK_REGISTER && pExpr->pTab!=0 happens when pExpr was originally
-    ** a TK_COLUMN but was previously evaluated and cached in a register */
-    int j = pExpr->iColumn;
-    if( j<0 ) return SQLITE_AFF_INTEGER;
-    assert( pExpr->pTab && j<pExpr->pTab->nCol );
-    return pExpr->pTab->aCol[j].affinity;
+  if( op==TK_AGG_COLUMN || op==TK_COLUMN ){
+    return sqlite3TableColumnAffinity(pExpr->pTab, pExpr->iColumn);
   }
+  if( op==TK_SELECT_COLUMN ){
+    assert( pExpr->pLeft->flags&EP_xIsSelect );
+    return sqlite3ExprAffinity(
+        pExpr->pLeft->x.pSelect->pEList->a[pExpr->iColumn].pExpr
+    );
+  }
   return pExpr->affinity;
 }
 
@@ -89679,7 +89925,7 @@
     aff = sqlite3CompareAffinity(pExpr->pRight, aff);
   }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){
     aff = sqlite3CompareAffinity(pExpr->x.pSelect->pEList->a[0].pExpr, aff);
-  }else if( !aff ){
+  }else if( NEVER(aff==0) ){
     aff = SQLITE_AFF_BLOB;
   }
   return aff;
@@ -89769,6 +90015,270 @@
   return addr;
 }
 
+/*
+** Return true if expression pExpr is a vector, or false otherwise.
+**
+** A vector is defined as any expression that results in two or more
+** columns of result.  Every TK_VECTOR node is an vector because the
+** parser will not generate a TK_VECTOR with fewer than two entries.
+** But a TK_SELECT might be either a vector or a scalar. It is only
+** considered a vector if it has two or more result columns.
+*/
+SQLITE_PRIVATE int sqlite3ExprIsVector(Expr *pExpr){
+  return sqlite3ExprVectorSize(pExpr)>1;
+}
+
+/*
+** If the expression passed as the only argument is of type TK_VECTOR 
+** return the number of expressions in the vector. Or, if the expression
+** is a sub-select, return the number of columns in the sub-select. For
+** any other type of expression, return 1.
+*/
+SQLITE_PRIVATE int sqlite3ExprVectorSize(Expr *pExpr){
+  u8 op = pExpr->op;
+  if( op==TK_REGISTER ) op = pExpr->op2;
+  if( op==TK_VECTOR ){
+    return pExpr->x.pList->nExpr;
+  }else if( op==TK_SELECT ){
+    return pExpr->x.pSelect->pEList->nExpr;
+  }else{
+    return 1;
+  }
+}
+
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** Return a pointer to a subexpression of pVector that is the i-th
+** column of the vector (numbered starting with 0).  The caller must
+** ensure that i is within range.
+**
+** If pVector is really a scalar (and "scalar" here includes subqueries
+** that return a single column!) then return pVector unmodified.
+**
+** pVector retains ownership of the returned subexpression.
+**
+** If the vector is a (SELECT ...) then the expression returned is
+** just the expression for the i-th term of the result set, and may
+** not be ready for evaluation because the table cursor has not yet
+** been positioned.
+*/
+SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr *pVector, int i){
+  assert( i<sqlite3ExprVectorSize(pVector) );
+  if( sqlite3ExprIsVector(pVector) ){
+    assert( pVector->op2==0 || pVector->op==TK_REGISTER );
+    if( pVector->op==TK_SELECT || pVector->op2==TK_SELECT ){
+      return pVector->x.pSelect->pEList->a[i].pExpr;
+    }else{
+      return pVector->x.pList->a[i].pExpr;
+    }
+  }
+  return pVector;
+}
+#endif /* !defined(SQLITE_OMIT_SUBQUERY) */
+
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** Compute and return a new Expr object which when passed to
+** sqlite3ExprCode() will generate all necessary code to compute
+** the iField-th column of the vector expression pVector.
+**
+** It is ok for pVector to be a scalar (as long as iField==0).  
+** In that case, this routine works like sqlite3ExprDup().
+**
+** The caller owns the returned Expr object and is responsible for
+** ensuring that the returned value eventually gets freed.
+**
+** The caller retains ownership of pVector.  If pVector is a TK_SELECT,
+** then the returned object will reference pVector and so pVector must remain
+** valid for the life of the returned object.  If pVector is a TK_VECTOR
+** or a scalar expression, then it can be deleted as soon as this routine
+** returns.
+**
+** A trick to cause a TK_SELECT pVector to be deleted together with
+** the returned Expr object is to attach the pVector to the pRight field
+** of the returned TK_SELECT_COLUMN Expr object.
+*/
+SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(
+  Parse *pParse,       /* Parsing context */
+  Expr *pVector,       /* The vector.  List of expressions or a sub-SELECT */
+  int iField           /* Which column of the vector to return */
+){
+  Expr *pRet;
+  if( pVector->op==TK_SELECT ){
+    assert( pVector->flags & EP_xIsSelect );
+    /* The TK_SELECT_COLUMN Expr node:
+    **
+    ** pLeft:           pVector containing TK_SELECT
+    ** pRight:          not used.  But recursively deleted.
+    ** iColumn:         Index of a column in pVector
+    ** pLeft->iTable:   First in an array of register holding result, or 0
+    **                  if the result is not yet computed.
+    **
+    ** sqlite3ExprDelete() specifically skips the recursive delete of
+    ** pLeft on TK_SELECT_COLUMN nodes.  But pRight is followed, so pVector
+    ** can be attached to pRight to cause this node to take ownership of
+    ** pVector.  Typically there will be multiple TK_SELECT_COLUMN nodes
+    ** with the same pLeft pointer to the pVector, but only one of them
+    ** will own the pVector.
+    */
+    pRet = sqlite3PExpr(pParse, TK_SELECT_COLUMN, 0, 0, 0);
+    if( pRet ){
+      pRet->iColumn = iField;
+      pRet->pLeft = pVector;
+    }
+    assert( pRet==0 || pRet->iTable==0 );
+  }else{
+    if( pVector->op==TK_VECTOR ) pVector = pVector->x.pList->a[iField].pExpr;
+    pRet = sqlite3ExprDup(pParse->db, pVector, 0);
+  }
+  return pRet;
+}
+#endif /* !define(SQLITE_OMIT_SUBQUERY) */
+
+/*
+** If expression pExpr is of type TK_SELECT, generate code to evaluate
+** it. Return the register in which the result is stored (or, if the 
+** sub-select returns more than one column, the first in an array
+** of registers in which the result is stored).
+**
+** If pExpr is not a TK_SELECT expression, return 0.
+*/
+static int exprCodeSubselect(Parse *pParse, Expr *pExpr){
+  int reg = 0;
+#ifndef SQLITE_OMIT_SUBQUERY
+  if( pExpr->op==TK_SELECT ){
+    reg = sqlite3CodeSubselect(pParse, pExpr, 0, 0);
+  }
+#endif
+  return reg;
+}
+
+/*
+** Argument pVector points to a vector expression - either a TK_VECTOR
+** or TK_SELECT that returns more than one column. This function returns
+** the register number of a register that contains the value of
+** element iField of the vector.
+**
+** If pVector is a TK_SELECT expression, then code for it must have 
+** already been generated using the exprCodeSubselect() routine. In this
+** case parameter regSelect should be the first in an array of registers
+** containing the results of the sub-select. 
+**
+** If pVector is of type TK_VECTOR, then code for the requested field
+** is generated. In this case (*pRegFree) may be set to the number of
+** a temporary register to be freed by the caller before returning.
+**
+** Before returning, output parameter (*ppExpr) is set to point to the
+** Expr object corresponding to element iElem of the vector.
+*/
+static int exprVectorRegister(
+  Parse *pParse,                  /* Parse context */
+  Expr *pVector,                  /* Vector to extract element from */
+  int iField,                     /* Field to extract from pVector */
+  int regSelect,                  /* First in array of registers */
+  Expr **ppExpr,                  /* OUT: Expression element */
+  int *pRegFree                   /* OUT: Temp register to free */
+){
+  u8 op = pVector->op;
+  assert( op==TK_VECTOR || op==TK_REGISTER || op==TK_SELECT );
+  if( op==TK_REGISTER ){
+    *ppExpr = sqlite3VectorFieldSubexpr(pVector, iField);
+    return pVector->iTable+iField;
+  }
+  if( op==TK_SELECT ){
+    *ppExpr = pVector->x.pSelect->pEList->a[iField].pExpr;
+     return regSelect+iField;
+  }
+  *ppExpr = pVector->x.pList->a[iField].pExpr;
+  return sqlite3ExprCodeTemp(pParse, *ppExpr, pRegFree);
+}
+
+/*
+** Expression pExpr is a comparison between two vector values. Compute
+** the result of the comparison (1, 0, or NULL) and write that
+** result into register dest.
+**
+** The caller must satisfy the following preconditions:
+**
+**    if pExpr->op==TK_IS:      op==TK_EQ and p5==SQLITE_NULLEQ
+**    if pExpr->op==TK_ISNOT:   op==TK_NE and p5==SQLITE_NULLEQ
+**    otherwise:                op==pExpr->op and p5==0
+*/
+static void codeVectorCompare(
+  Parse *pParse,        /* Code generator context */
+  Expr *pExpr,          /* The comparison operation */
+  int dest,             /* Write results into this register */
+  u8 op,                /* Comparison operator */
+  u8 p5                 /* SQLITE_NULLEQ or zero */
+){
+  Vdbe *v = pParse->pVdbe;
+  Expr *pLeft = pExpr->pLeft;
+  Expr *pRight = pExpr->pRight;
+  int nLeft = sqlite3ExprVectorSize(pLeft);
+  int i;
+  int regLeft = 0;
+  int regRight = 0;
+  u8 opx = op;
+  int addrDone = sqlite3VdbeMakeLabel(v);
+
+  assert( nLeft==sqlite3ExprVectorSize(pRight) );
+  assert( pExpr->op==TK_EQ || pExpr->op==TK_NE 
+       || pExpr->op==TK_IS || pExpr->op==TK_ISNOT 
+       || pExpr->op==TK_LT || pExpr->op==TK_GT 
+       || pExpr->op==TK_LE || pExpr->op==TK_GE 
+  );
+  assert( pExpr->op==op || (pExpr->op==TK_IS && op==TK_EQ)
+            || (pExpr->op==TK_ISNOT && op==TK_NE) );
+  assert( p5==0 || pExpr->op!=op );
+  assert( p5==SQLITE_NULLEQ || pExpr->op==op );
+
+  p5 |= SQLITE_STOREP2;
+  if( opx==TK_LE ) opx = TK_LT;
+  if( opx==TK_GE ) opx = TK_GT;
+
+  regLeft = exprCodeSubselect(pParse, pLeft);
+  regRight = exprCodeSubselect(pParse, pRight);
+
+  for(i=0; 1 /*Loop exits by "break"*/; i++){
+    int regFree1 = 0, regFree2 = 0;
+    Expr *pL, *pR; 
+    int r1, r2;
+    assert( i>=0 && i<nLeft );
+    if( i>0 ) sqlite3ExprCachePush(pParse);
+    r1 = exprVectorRegister(pParse, pLeft, i, regLeft, &pL, &regFree1);
+    r2 = exprVectorRegister(pParse, pRight, i, regRight, &pR, &regFree2);
+    codeCompare(pParse, pL, pR, opx, r1, r2, dest, p5);
+    testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt);
+    testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
+    testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
+    testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
+    testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
+    testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
+    sqlite3ReleaseTempReg(pParse, regFree1);
+    sqlite3ReleaseTempReg(pParse, regFree2);
+    if( i>0 ) sqlite3ExprCachePop(pParse);
+    if( i==nLeft-1 ){
+      break;
+    }
+    if( opx==TK_EQ ){
+      sqlite3VdbeAddOp2(v, OP_IfNot, dest, addrDone); VdbeCoverage(v);
+      p5 |= SQLITE_KEEPNULL;
+    }else if( opx==TK_NE ){
+      sqlite3VdbeAddOp2(v, OP_If, dest, addrDone); VdbeCoverage(v);
+      p5 |= SQLITE_KEEPNULL;
+    }else{
+      assert( op==TK_LT || op==TK_GT || op==TK_LE || op==TK_GE );
+      sqlite3VdbeAddOp2(v, OP_ElseNotEq, 0, addrDone);
+      VdbeCoverageIf(v, op==TK_LT);
+      VdbeCoverageIf(v, op==TK_GT);
+      VdbeCoverageIf(v, op==TK_LE);
+      VdbeCoverageIf(v, op==TK_GE);
+      if( i==nLeft-2 ) opx = op;
+    }
+  }
+  sqlite3VdbeResolveLabel(v, addrDone);
+}
+
 #if SQLITE_MAX_EXPR_DEPTH>0
 /*
 ** Check that argument nHeight is less than or equal to the maximum
@@ -89904,7 +90414,7 @@
 ** is allocated to hold the integer text and the dequote flag is ignored.
 */
 SQLITE_PRIVATE Expr *sqlite3ExprAlloc(
-  sqlite3 *db,            /* Handle for sqlite3DbMallocZero() (may be null) */
+  sqlite3 *db,            /* Handle for sqlite3DbMallocRawNN() */
   int op,                 /* Expression opcode */
   const Token *pToken,    /* Token argument.  Might be NULL */
   int dequote             /* True to dequote */
@@ -90122,7 +90632,7 @@
 ** instance of the wildcard, the next sequential variable number is
 ** assigned.
 */
-SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr){
+SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr, u32 n){
   sqlite3 *db = pParse->db;
   const char *z;
 
@@ -90131,27 +90641,27 @@
   z = pExpr->u.zToken;
   assert( z!=0 );
   assert( z[0]!=0 );
+  assert( n==sqlite3Strlen30(z) );
   if( z[1]==0 ){
     /* Wildcard of the form "?".  Assign the next variable number */
     assert( z[0]=='?' );
     pExpr->iColumn = (ynVar)(++pParse->nVar);
   }else{
-    ynVar x = 0;
-    u32 n = sqlite3Strlen30(z);
+    ynVar x;
     if( z[0]=='?' ){
       /* Wildcard of the form "?nnn".  Convert "nnn" to an integer and
       ** use it as the variable number */
       i64 i;
       int bOk = 0==sqlite3Atoi64(&z[1], &i, n-1, SQLITE_UTF8);
-      pExpr->iColumn = x = (ynVar)i;
+      x = (ynVar)i;
       testcase( i==0 );
       testcase( i==1 );
       testcase( i==db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]-1 );
       testcase( i==db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] );
       if( bOk==0 || i<1 || i>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){
         sqlite3ErrorMsg(pParse, "variable number must be between ?1 and ?%d",
             db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]);
-        x = 0;
+        return;
       }
       if( i>pParse->nVar ){
         pParse->nVar = (int)i;
@@ -90162,33 +90672,31 @@
       ** has never appeared before, reuse the same variable number
       */
       ynVar i;
-      for(i=0; i<pParse->nzVar; i++){
+      for(i=x=0; i<pParse->nzVar; i++){
         if( pParse->azVar[i] && strcmp(pParse->azVar[i],z)==0 ){
-          pExpr->iColumn = x = (ynVar)i+1;
+          x = (ynVar)i+1;
           break;
         }
       }
-      if( x==0 ) x = pExpr->iColumn = (ynVar)(++pParse->nVar);
+      if( x==0 ) x = (ynVar)(++pParse->nVar);
     }
-    if( x>0 ){
-      if( x>pParse->nzVar ){
-        char **a;
-        a = sqlite3DbRealloc(db, pParse->azVar, x*sizeof(a[0]));
-        if( a==0 ){
-          assert( db->mallocFailed ); /* Error reported through mallocFailed */
-          return;
-        }
-        pParse->azVar = a;
-        memset(&a[pParse->nzVar], 0, (x-pParse->nzVar)*sizeof(a[0]));
-        pParse->nzVar = x;
+    pExpr->iColumn = x;
+    if( x>pParse->nzVar ){
+      char **a;
+      a = sqlite3DbRealloc(db, pParse->azVar, x*sizeof(a[0]));
+      if( a==0 ){
+        assert( db->mallocFailed ); /* Error reported through mallocFailed */
+        return;
       }
-      if( z[0]!='?' || pParse->azVar[x-1]==0 ){
-        sqlite3DbFree(db, pParse->azVar[x-1]);
-        pParse->azVar[x-1] = sqlite3DbStrNDup(db, z, n);
-      }
+      pParse->azVar = a;
+      memset(&a[pParse->nzVar], 0, (x-pParse->nzVar)*sizeof(a[0]));
+      pParse->nzVar = x;
     }
+    if( pParse->azVar[x-1]==0 ){
+      pParse->azVar[x-1] = sqlite3DbStrNDup(db, z, n);
+    }
   } 
-  if( !pParse->nErr && pParse->nVar>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){
+  if( pParse->nVar>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){
     sqlite3ErrorMsg(pParse, "too many SQL variables");
   }
 }
@@ -90200,18 +90708,25 @@
   assert( p!=0 );
   /* Sanity check: Assert that the IntValue is non-negative if it exists */
   assert( !ExprHasProperty(p, EP_IntValue) || p->u.iValue>=0 );
-  if( !ExprHasProperty(p, EP_TokenOnly) ){
+#ifdef SQLITE_DEBUG
+  if( ExprHasProperty(p, EP_Leaf) && !ExprHasProperty(p, EP_TokenOnly) ){
+    assert( p->pLeft==0 );
+    assert( p->pRight==0 );
+    assert( p->x.pSelect==0 );
+  }
+#endif
+  if( !ExprHasProperty(p, (EP_TokenOnly|EP_Leaf)) ){
     /* The Expr.x union is never used at the same time as Expr.pRight */
     assert( p->x.pList==0 || p->pRight==0 );
-    sqlite3ExprDelete(db, p->pLeft);
+    if( p->pLeft && p->op!=TK_SELECT_COLUMN ) sqlite3ExprDeleteNN(db, p->pLeft);
     sqlite3ExprDelete(db, p->pRight);
-    if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken);
     if( ExprHasProperty(p, EP_xIsSelect) ){
       sqlite3SelectDelete(db, p->x.pSelect);
     }else{
       sqlite3ExprListDelete(db, p->x.pList);
     }
   }
+  if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken);
   if( !ExprHasProperty(p, EP_Static) ){
     sqlite3DbFree(db, p);
   }
@@ -90388,7 +90903,7 @@
       memcpy(zToken, p->u.zToken, nToken);
     }
 
-    if( 0==((p->flags|pNew->flags) & EP_TokenOnly) ){
+    if( 0==((p->flags|pNew->flags) & (EP_TokenOnly|EP_Leaf)) ){
       /* Fill in the pNew->x.pSelect or pNew->x.pList member. */
       if( ExprHasProperty(p, EP_xIsSelect) ){
         pNew->x.pSelect = sqlite3SelectDup(db, p->x.pSelect, dupFlags);
@@ -90400,7 +90915,7 @@
     /* Fill in pNew->pLeft and pNew->pRight. */
     if( ExprHasProperty(pNew, EP_Reduced|EP_TokenOnly) ){
       zAlloc += dupedExprNodeSize(p, dupFlags);
-      if( ExprHasProperty(pNew, EP_Reduced) ){
+      if( !ExprHasProperty(pNew, EP_TokenOnly|EP_Leaf) ){
         pNew->pLeft = p->pLeft ?
                       exprDup(db, p->pLeft, EXPRDUP_REDUCE, &zAlloc) : 0;
         pNew->pRight = p->pRight ?
@@ -90410,8 +90925,12 @@
         *pzBuffer = zAlloc;
       }
     }else{
-      if( !ExprHasProperty(p, EP_TokenOnly) ){
-        pNew->pLeft = sqlite3ExprDup(db, p->pLeft, 0);
+      if( !ExprHasProperty(p, EP_TokenOnly|EP_Leaf) ){
+        if( pNew->op==TK_SELECT_COLUMN ){
+          pNew->pLeft = p->pLeft;
+        }else{
+          pNew->pLeft = sqlite3ExprDup(db, p->pLeft, 0);
+        }
         pNew->pRight = sqlite3ExprDup(db, p->pRight, 0);
       }
     }
@@ -90653,6 +91172,60 @@
 }
 
 /*
+** pColumns and pExpr form a vector assignment which is part of the SET
+** clause of an UPDATE statement.  Like this:
+**
+**        (a,b,c) = (expr1,expr2,expr3)
+** Or:    (a,b,c) = (SELECT x,y,z FROM ....)
+**
+** For each term of the vector assignment, append new entries to the
+** expression list pList.  In the case of a subquery on the LHS, append
+** TK_SELECT_COLUMN expressions.
+*/
+SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(
+  Parse *pParse,         /* Parsing context */
+  ExprList *pList,       /* List to which to append. Might be NULL */
+  IdList *pColumns,      /* List of names of LHS of the assignment */
+  Expr *pExpr            /* Vector expression to be appended. Might be NULL */
+){
+  sqlite3 *db = pParse->db;
+  int n;
+  int i;
+  int iFirst = pList ? pList->nExpr : 0;
+  /* pColumns can only be NULL due to an OOM but an OOM will cause an
+  ** exit prior to this routine being invoked */
+  if( NEVER(pColumns==0) ) goto vector_append_error;
+  if( pExpr==0 ) goto vector_append_error;
+  n = sqlite3ExprVectorSize(pExpr);
+  if( pColumns->nId!=n ){
+    sqlite3ErrorMsg(pParse, "%d columns assigned %d values",
+                    pColumns->nId, n);
+    goto vector_append_error;
+  }
+  for(i=0; i<n; i++){
+    Expr *pSubExpr = sqlite3ExprForVectorField(pParse, pExpr, i);
+    pList = sqlite3ExprListAppend(pParse, pList, pSubExpr);
+    if( pList ){
+      assert( pList->nExpr==iFirst+i+1 );
+      pList->a[pList->nExpr-1].zName = pColumns->a[i].zName;
+      pColumns->a[i].zName = 0;
+    }
+  }
+  if( pExpr->op==TK_SELECT ){
+    if( pList && pList->a[iFirst].pExpr ){
+      assert( pList->a[iFirst].pExpr->op==TK_SELECT_COLUMN );
+      pList->a[iFirst].pExpr->pRight = pExpr;
+      pExpr = 0;
+    }
+  }
+
+vector_append_error:
+  sqlite3ExprDelete(db, pExpr);
+  sqlite3IdListDelete(db, pColumns);
+  return pList;
+}
+
+/*
 ** Set the sort order for the last element on the given ExprList.
 */
 SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList *p, int iSortOrder){
@@ -91059,8 +91632,8 @@
   Select *p;
   SrcList *pSrc;
   ExprList *pEList;
-  Expr *pRes;
   Table *pTab;
+  int i;
   if( !ExprHasProperty(pX, EP_xIsSelect) ) return 0;  /* Not a subquery */
   if( ExprHasProperty(pX, EP_VarSelect)  ) return 0;  /* Correlated subq */
   p = pX->x.pSelect;
@@ -91083,24 +91656,19 @@
   assert( pTab->pSelect==0 );            /* FROM clause is not a view */
   if( IsVirtual(pTab) ) return 0;        /* FROM clause not a virtual table */
   pEList = p->pEList;
-  if( pEList->nExpr!=1 ) return 0;       /* One column in the result set */
-  pRes = pEList->a[0].pExpr;
-  if( pRes->op!=TK_COLUMN ) return 0;    /* Result is a column */
-  assert( pRes->iTable==pSrc->a[0].iCursor );  /* Not a correlated subquery */
+  assert( pEList!=0 );
+  /* All SELECT results must be columns. */
+  for(i=0; i<pEList->nExpr; i++){
+    Expr *pRes = pEList->a[i].pExpr;
+    if( pRes->op!=TK_COLUMN ) return 0;
+    assert( pRes->iTable==pSrc->a[0].iCursor );  /* Not a correlated subquery */
+  }
   return p;
 }
 #endif /* SQLITE_OMIT_SUBQUERY */
 
+#ifndef SQLITE_OMIT_SUBQUERY
 /*
-** Code an OP_Once instruction and allocate space for its flag. Return the 
-** address of the new instruction.
-*/
-SQLITE_PRIVATE int sqlite3CodeOnce(Parse *pParse){
-  Vdbe *v = sqlite3GetVdbe(pParse);      /* Virtual machine being coded */
-  return sqlite3VdbeAddOp1(v, OP_Once, pParse->nOnce++);
-}
-
-/*
 ** Generate code that checks the left-most column of index table iCur to see if
 ** it contains any NULL entries.  Cause the register at regHasNull to be set
 ** to a non-NULL value if iCur contains no NULLs.  Cause register regHasNull
@@ -91115,6 +91683,7 @@
   VdbeComment((v, "first_entry_in(%d)", iCur));
   sqlite3VdbeJumpHere(v, addr1);
 }
+#endif
 
 
 #ifndef SQLITE_OMIT_SUBQUERY
@@ -91159,7 +91728,7 @@
 ** An existing b-tree might be used if the RHS expression pX is a simple
 ** subquery such as:
 **
-**     SELECT <column> FROM <table>
+**     SELECT <column1>, <column2>... FROM <table>
 **
 ** If the RHS of the IN operator is a list or a more complex subquery, then
 ** an ephemeral table might need to be generated from the RHS and then
@@ -91175,14 +91744,14 @@
 **
 ** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate
 ** through the set members) then the b-tree must not contain duplicates.
-** An epheremal table must be used unless the selected <column> is guaranteed
-** to be unique - either because it is an INTEGER PRIMARY KEY or it
-** has a UNIQUE constraint or UNIQUE index.
+** An epheremal table must be used unless the selected columns are guaranteed
+** to be unique - either because it is an INTEGER PRIMARY KEY or due to
+** a UNIQUE constraint or index.
 **
 ** When IN_INDEX_MEMBERSHIP is used (and the b-tree will be used 
 ** for fast set membership tests) then an epheremal table must 
-** be used unless <column> is an INTEGER PRIMARY KEY or an index can 
-** be found with <column> as its left-most column.
+** be used unless <columns> is a single INTEGER PRIMARY KEY column or an 
+** index can be found with the specified <columns> as its left-most.
 **
 ** If the IN_INDEX_NOOP_OK and IN_INDEX_MEMBERSHIP are both set and
 ** if the RHS of the IN operator is a list (not a subquery) then this
@@ -91203,9 +91772,26 @@
 ** the value in that register will be NULL if the b-tree contains one or more
 ** NULL values, and it will be some non-NULL value if the b-tree contains no
 ** NULL values.
+**
+** If the aiMap parameter is not NULL, it must point to an array containing
+** one element for each column returned by the SELECT statement on the RHS
+** of the IN(...) operator. The i'th entry of the array is populated with the
+** offset of the index column that matches the i'th column returned by the
+** SELECT. For example, if the expression and selected index are:
+**
+**   (?,?,?) IN (SELECT a, b, c FROM t1)
+**   CREATE INDEX i1 ON t1(b, c, a);
+**
+** then aiMap[] is populated with {2, 0, 1}.
 */
 #ifndef SQLITE_OMIT_SUBQUERY
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, u32 inFlags, int *prRhsHasNull){
+SQLITE_PRIVATE int sqlite3FindInIndex(
+  Parse *pParse,             /* Parsing context */
+  Expr *pX,                  /* The right-hand side (RHS) of the IN operator */
+  u32 inFlags,               /* IN_INDEX_LOOP, _MEMBERSHIP, and/or _NOOP_OK */
+  int *prRhsHasNull,         /* Register holding NULL status.  See notes */
+  int *aiMap                 /* Mapping from Index fields to RHS fields */
+){
   Select *p;                            /* SELECT to the right of IN operator */
   int eType = 0;                        /* Type of RHS table. IN_INDEX_* */
   int iTab = pParse->nTab++;            /* Cursor of the RHS table */
@@ -91215,36 +91801,46 @@
   assert( pX->op==TK_IN );
   mustBeUnique = (inFlags & IN_INDEX_LOOP)!=0;
 
+  /* If the RHS of this IN(...) operator is a SELECT, and if it matters 
+  ** whether or not the SELECT result contains NULL values, check whether
+  ** or not NULL is actually possible (it may not be, for example, due 
+  ** to NOT NULL constraints in the schema). If no NULL values are possible,
+  ** set prRhsHasNull to 0 before continuing.  */
+  if( prRhsHasNull && (pX->flags & EP_xIsSelect) ){
+    int i;
+    ExprList *pEList = pX->x.pSelect->pEList;
+    for(i=0; i<pEList->nExpr; i++){
+      if( sqlite3ExprCanBeNull(pEList->a[i].pExpr) ) break;
+    }
+    if( i==pEList->nExpr ){
+      prRhsHasNull = 0;
+    }
+  }
+
   /* Check to see if an existing table or index can be used to
   ** satisfy the query.  This is preferable to generating a new 
-  ** ephemeral table.
-  */
+  ** ephemeral table.  */
   if( pParse->nErr==0 && (p = isCandidateForInOpt(pX))!=0 ){
     sqlite3 *db = pParse->db;              /* Database connection */
     Table *pTab;                           /* Table <table>. */
-    Expr *pExpr;                           /* Expression <column> */
-    i16 iCol;                              /* Index of column <column> */
     i16 iDb;                               /* Database idx for pTab */
+    ExprList *pEList = p->pEList;
+    int nExpr = pEList->nExpr;
 
     assert( p->pEList!=0 );             /* Because of isCandidateForInOpt(p) */
     assert( p->pEList->a[0].pExpr!=0 ); /* Because of isCandidateForInOpt(p) */
     assert( p->pSrc!=0 );               /* Because of isCandidateForInOpt(p) */
     pTab = p->pSrc->a[0].pTab;
-    pExpr = p->pEList->a[0].pExpr;
-    iCol = (i16)pExpr->iColumn;
-   
+
     /* Code an OP_Transaction and OP_TableLock for <table>. */
     iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
     sqlite3CodeVerifySchema(pParse, iDb);
     sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);
 
-    /* This function is only called from two places. In both cases the vdbe
-    ** has already been allocated. So assume sqlite3GetVdbe() is always
-    ** successful here.
-    */
-    assert(v);
-    if( iCol<0 ){
-      int iAddr = sqlite3CodeOnce(pParse);
+    assert(v);  /* sqlite3GetVdbe() has always been previously called */
+    if( nExpr==1 && pEList->a[0].pExpr->iColumn<0 ){
+      /* The "x IN (SELECT rowid FROM table)" case */
+      int iAddr = sqlite3VdbeAddOp0(v, OP_Once);
       VdbeCoverage(v);
 
       sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead);
@@ -91253,44 +91849,109 @@
       sqlite3VdbeJumpHere(v, iAddr);
     }else{
       Index *pIdx;                         /* Iterator variable */
+      int affinity_ok = 1;
+      int i;
 
-      /* The collation sequence used by the comparison. If an index is to
-      ** be used in place of a temp-table, it must be ordered according
-      ** to this collation sequence.  */
-      CollSeq *pReq = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pExpr);
+      /* Check that the affinity that will be used to perform each 
+      ** comparison is the same as the affinity of each column in table
+      ** on the RHS of the IN operator.  If it not, it is not possible to
+      ** use any index of the RHS table.  */
+      for(i=0; i<nExpr && affinity_ok; i++){
+        Expr *pLhs = sqlite3VectorFieldSubexpr(pX->pLeft, i);
+        int iCol = pEList->a[i].pExpr->iColumn;
+        char idxaff = sqlite3TableColumnAffinity(pTab,iCol); /* RHS table */
+        char cmpaff = sqlite3CompareAffinity(pLhs, idxaff);
+        testcase( cmpaff==SQLITE_AFF_BLOB );
+        testcase( cmpaff==SQLITE_AFF_TEXT );
+        switch( cmpaff ){
+          case SQLITE_AFF_BLOB:
+            break;
+          case SQLITE_AFF_TEXT:
+            /* sqlite3CompareAffinity() only returns TEXT if one side or the
+            ** other has no affinity and the other side is TEXT.  Hence,
+            ** the only way for cmpaff to be TEXT is for idxaff to be TEXT
+            ** and for the term on the LHS of the IN to have no affinity. */
+            assert( idxaff==SQLITE_AFF_TEXT );
+            break;
+          default:
+            affinity_ok = sqlite3IsNumericAffinity(idxaff);
+        }
+      }
 
-      /* Check that the affinity that will be used to perform the 
-      ** comparison is the same as the affinity of the column. If
-      ** it is not, it is not possible to use any index.
-      */
-      int affinity_ok = sqlite3IndexAffinityOk(pX, pTab->aCol[iCol].affinity);
-
-      for(pIdx=pTab->pIndex; pIdx && eType==0 && affinity_ok; pIdx=pIdx->pNext){
-        if( (pIdx->aiColumn[0]==iCol)
-         && sqlite3FindCollSeq(db, ENC(db), pIdx->azColl[0], 0)==pReq
-         && (!mustBeUnique || (pIdx->nKeyCol==1 && IsUniqueIndex(pIdx)))
-        ){
-          int iAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v);
-          sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb);
-          sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
-          VdbeComment((v, "%s", pIdx->zName));
-          assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 );
-          eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0];
-
-          if( prRhsHasNull && !pTab->aCol[iCol].notNull ){
+      if( affinity_ok ){
+        /* Search for an existing index that will work for this IN operator */
+        for(pIdx=pTab->pIndex; pIdx && eType==0; pIdx=pIdx->pNext){
+          Bitmask colUsed;      /* Columns of the index used */
+          Bitmask mCol;         /* Mask for the current column */
+          if( pIdx->nColumn<nExpr ) continue;
+          /* Maximum nColumn is BMS-2, not BMS-1, so that we can compute
+          ** BITMASK(nExpr) without overflowing */
+          testcase( pIdx->nColumn==BMS-2 );
+          testcase( pIdx->nColumn==BMS-1 );
+          if( pIdx->nColumn>=BMS-1 ) continue;
+          if( mustBeUnique ){
+            if( pIdx->nKeyCol>nExpr
+             ||(pIdx->nColumn>nExpr && !IsUniqueIndex(pIdx))
+            ){
+              continue;  /* This index is not unique over the IN RHS columns */
+            }
+          }
+  
+          colUsed = 0;   /* Columns of index used so far */
+          for(i=0; i<nExpr; i++){
+            Expr *pLhs = sqlite3VectorFieldSubexpr(pX->pLeft, i);
+            Expr *pRhs = pEList->a[i].pExpr;
+            CollSeq *pReq = sqlite3BinaryCompareCollSeq(pParse, pLhs, pRhs);
+            int j;
+  
+            assert( pReq!=0 || pRhs->iColumn==XN_ROWID || pParse->nErr );
+            for(j=0; j<nExpr; j++){
+              if( pIdx->aiColumn[j]!=pRhs->iColumn ) continue;
+              assert( pIdx->azColl[j] );
+              if( pReq!=0 && sqlite3StrICmp(pReq->zName, pIdx->azColl[j])!=0 ){
+                continue;
+              }
+              break;
+            }
+            if( j==nExpr ) break;
+            mCol = MASKBIT(j);
+            if( mCol & colUsed ) break; /* Each column used only once */
+            colUsed |= mCol;
+            if( aiMap ) aiMap[i] = j;
+          }
+  
+          assert( i==nExpr || colUsed!=(MASKBIT(nExpr)-1) );
+          if( colUsed==(MASKBIT(nExpr)-1) ){
+            /* If we reach this point, that means the index pIdx is usable */
+            int iAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
+#ifndef SQLITE_OMIT_EXPLAIN
+            sqlite3VdbeAddOp4(v, OP_Explain, 0, 0, 0,
+              sqlite3MPrintf(db, "USING INDEX %s FOR IN-OPERATOR",pIdx->zName),
+              P4_DYNAMIC);
+#endif
+            sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb);
+            sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
+            VdbeComment((v, "%s", pIdx->zName));
+            assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 );
+            eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0];
+  
+            if( prRhsHasNull ){
 #ifdef SQLITE_ENABLE_COLUMN_USED_MASK
-            const i64 sOne = 1;
-            sqlite3VdbeAddOp4Dup8(v, OP_ColumnsUsed, 
-                iTab, 0, 0, (u8*)&sOne, P4_INT64);
+              i64 mask = (1<<nExpr)-1;
+              sqlite3VdbeAddOp4Dup8(v, OP_ColumnsUsed, 
+                  iTab, 0, 0, (u8*)&mask, P4_INT64);
 #endif
-            *prRhsHasNull = ++pParse->nMem;
-            sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull);
+              *prRhsHasNull = ++pParse->nMem;
+              if( nExpr==1 ){
+                sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull);
+              }
+            }
+            sqlite3VdbeJumpHere(v, iAddr);
           }
-          sqlite3VdbeJumpHere(v, iAddr);
-        }
-      }
-    }
-  }
+        } /* End loop over indexes */
+      } /* End if( affinity_ok ) */
+    } /* End if not an rowid index */
+  } /* End attempt to optimize using an index */
 
   /* If no preexisting index is available for the IN clause
   ** and IN_INDEX_NOOP is an allowed reply
@@ -91306,7 +91967,6 @@
   ){
     eType = IN_INDEX_NOOP;
   }
-     
 
   if( eType==0 ){
     /* Could not find an existing table or index to use as the RHS b-tree.
@@ -91328,11 +91988,64 @@
   }else{
     pX->iTable = iTab;
   }
+
+  if( aiMap && eType!=IN_INDEX_INDEX_ASC && eType!=IN_INDEX_INDEX_DESC ){
+    int i, n;
+    n = sqlite3ExprVectorSize(pX->pLeft);
+    for(i=0; i<n; i++) aiMap[i] = i;
+  }
   return eType;
 }
 #endif
 
+#ifndef SQLITE_OMIT_SUBQUERY
 /*
+** Argument pExpr is an (?, ?...) IN(...) expression. This 
+** function allocates and returns a nul-terminated string containing 
+** the affinities to be used for each column of the comparison.
+**
+** It is the responsibility of the caller to ensure that the returned
+** string is eventually freed using sqlite3DbFree().
+*/
+static char *exprINAffinity(Parse *pParse, Expr *pExpr){
+  Expr *pLeft = pExpr->pLeft;
+  int nVal = sqlite3ExprVectorSize(pLeft);
+  Select *pSelect = (pExpr->flags & EP_xIsSelect) ? pExpr->x.pSelect : 0;
+  char *zRet;
+
+  assert( pExpr->op==TK_IN );
+  zRet = sqlite3DbMallocZero(pParse->db, nVal+1);
+  if( zRet ){
+    int i;
+    for(i=0; i<nVal; i++){
+      Expr *pA = sqlite3VectorFieldSubexpr(pLeft, i);
+      char a = sqlite3ExprAffinity(pA);
+      if( pSelect ){
+        zRet[i] = sqlite3CompareAffinity(pSelect->pEList->a[i].pExpr, a);
+      }else{
+        zRet[i] = a;
+      }
+    }
+    zRet[nVal] = '\0';
+  }
+  return zRet;
+}
+#endif
+
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** Load the Parse object passed as the first argument with an error 
+** message of the form:
+**
+**   "sub-select returns N columns - expected M"
+*/   
+SQLITE_PRIVATE void sqlite3SubselectError(Parse *pParse, int nActual, int nExpect){
+  const char *zFmt = "sub-select returns %d columns - expected %d";
+  sqlite3ErrorMsg(pParse, zFmt, nActual, nExpect);
+}
+#endif
+
+/*
 ** Generate code for scalar subqueries used as a subquery expression, EXISTS,
 ** or IN operators.  Examples:
 **
@@ -91357,7 +92070,9 @@
 ** value to non-NULL if the RHS is NULL-free.
 **
 ** For a SELECT or EXISTS operator, return the register that holds the
-** result.  For IN operators or if an error occurs, the return value is 0.
+** result.  For a multi-column SELECT, the result is stored in a contiguous
+** array of registers and the return value is the register of the left-most
+** result column.  Return 0 for IN operators or if an error occurs.
 */
 #ifndef SQLITE_OMIT_SUBQUERY
 SQLITE_PRIVATE int sqlite3CodeSubselect(
@@ -91372,8 +92087,8 @@
   if( NEVER(v==0) ) return 0;
   sqlite3ExprCachePush(pParse);
 
-  /* This code must be run in its entirety every time it is encountered
-  ** if any of the following is true:
+  /* The evaluation of the IN/EXISTS/SELECT must be repeated every time it
+  ** is encountered if any of the following is true:
   **
   **    *  The right-hand side is a correlated subquery
   **    *  The right-hand side is an expression list containing variables
@@ -91383,7 +92098,7 @@
   ** save the results, and reuse the same result on subsequent invocations.
   */
   if( !ExprHasProperty(pExpr, EP_VarSelect) ){
-    jmpIfDynamic = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+    jmpIfDynamic = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
   }
 
 #ifndef SQLITE_OMIT_EXPLAIN
@@ -91399,17 +92114,18 @@
 
   switch( pExpr->op ){
     case TK_IN: {
-      char affinity;              /* Affinity of the LHS of the IN */
       int addr;                   /* Address of OP_OpenEphemeral instruction */
       Expr *pLeft = pExpr->pLeft; /* the LHS of the IN operator */
       KeyInfo *pKeyInfo = 0;      /* Key information */
+      int nVal;                   /* Size of vector pLeft */
+      
+      nVal = sqlite3ExprVectorSize(pLeft);
+      assert( !isRowid || nVal==1 );
 
-      affinity = sqlite3ExprAffinity(pLeft);
-
       /* Whether this is an 'x IN(SELECT...)' or an 'x IN(<exprlist>)'
       ** expression it is handled the same way.  An ephemeral table is 
-      ** filled with single-field index keys representing the results
-      ** from the SELECT or the <exprlist>.
+      ** filled with index keys representing the results from the 
+      ** SELECT or the <exprlist>.
       **
       ** If the 'x' expression is a column value, or the SELECT...
       ** statement returns a column value, then the affinity of that
@@ -91420,8 +92136,9 @@
       ** is used.
       */
       pExpr->iTable = pParse->nTab++;
-      addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pExpr->iTable, !isRowid);
-      pKeyInfo = isRowid ? 0 : sqlite3KeyInfoAlloc(pParse->db, 1, 1);
+      addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, 
+          pExpr->iTable, (isRowid?0:nVal));
+      pKeyInfo = isRowid ? 0 : sqlite3KeyInfoAlloc(pParse->db, nVal, 1);
 
       if( ExprHasProperty(pExpr, EP_xIsSelect) ){
         /* Case 1:     expr IN (SELECT ...)
@@ -91430,27 +92147,37 @@
         ** table allocated and opened above.
         */
         Select *pSelect = pExpr->x.pSelect;
-        SelectDest dest;
-        ExprList *pEList;
+        ExprList *pEList = pSelect->pEList;
 
         assert( !isRowid );
-        sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable);
-        dest.affSdst = (u8)affinity;
-        assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable );
-        pSelect->iLimit = 0;
-        testcase( pSelect->selFlags & SF_Distinct );
-        testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */
-        if( sqlite3Select(pParse, pSelect, &dest) ){
-          sqlite3KeyInfoUnref(pKeyInfo);
-          return 0;
+        /* If the LHS and RHS of the IN operator do not match, that
+        ** error will have been caught long before we reach this point. */
+        if( ALWAYS(pEList->nExpr==nVal) ){
+          SelectDest dest;
+          int i;
+          sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable);
+          dest.zAffSdst = exprINAffinity(pParse, pExpr);
+          assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable );
+          pSelect->iLimit = 0;
+          testcase( pSelect->selFlags & SF_Distinct );
+          testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */
+          if( sqlite3Select(pParse, pSelect, &dest) ){
+            sqlite3DbFree(pParse->db, dest.zAffSdst);
+            sqlite3KeyInfoUnref(pKeyInfo);
+            return 0;
+          }
+          sqlite3DbFree(pParse->db, dest.zAffSdst);
+          assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */
+          assert( pEList!=0 );
+          assert( pEList->nExpr>0 );
+          assert( sqlite3KeyInfoIsWriteable(pKeyInfo) );
+          for(i=0; i<nVal; i++){
+            Expr *p = sqlite3VectorFieldSubexpr(pLeft, i);
+            pKeyInfo->aColl[i] = sqlite3BinaryCompareCollSeq(
+                pParse, p, pEList->a[i].pExpr
+            );
+          }
         }
-        pEList = pSelect->pEList;
-        assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */
-        assert( pEList!=0 );
-        assert( pEList->nExpr>0 );
-        assert( sqlite3KeyInfoIsWriteable(pKeyInfo) );
-        pKeyInfo->aColl[0] = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft,
-                                                         pEList->a[0].pExpr);
       }else if( ALWAYS(pExpr->x.pList!=0) ){
         /* Case 2:     expr IN (exprlist)
         **
@@ -91459,11 +92186,13 @@
         ** that columns affinity when building index keys. If <expr> is not
         ** a column, use numeric affinity.
         */
+        char affinity;            /* Affinity of the LHS of the IN */
         int i;
         ExprList *pList = pExpr->x.pList;
         struct ExprList_item *pItem;
         int r1, r2, r3;
 
+        affinity = sqlite3ExprAffinity(pLeft);
         if( !affinity ){
           affinity = SQLITE_AFF_BLOB;
         }
@@ -91519,35 +92248,46 @@
     case TK_EXISTS:
     case TK_SELECT:
     default: {
-      /* If this has to be a scalar SELECT.  Generate code to put the
-      ** value of this select in a memory cell and record the number
-      ** of the memory cell in iColumn.  If this is an EXISTS, write
-      ** an integer 0 (not exists) or 1 (exists) into a memory cell
-      ** and record that memory cell in iColumn.
+      /* Case 3:    (SELECT ... FROM ...)
+      **     or:    EXISTS(SELECT ... FROM ...)
+      **
+      ** For a SELECT, generate code to put the values for all columns of
+      ** the first row into an array of registers and return the index of
+      ** the first register.
+      **
+      ** If this is an EXISTS, write an integer 0 (not exists) or 1 (exists)
+      ** into a register and return that register number.
+      **
+      ** In both cases, the query is augmented with "LIMIT 1".  Any 
+      ** preexisting limit is discarded in place of the new LIMIT 1.
       */
       Select *pSel;                         /* SELECT statement to encode */
-      SelectDest dest;                      /* How to deal with SELECt result */
+      SelectDest dest;                      /* How to deal with SELECT result */
+      int nReg;                             /* Registers to allocate */
 
       testcase( pExpr->op==TK_EXISTS );
       testcase( pExpr->op==TK_SELECT );
       assert( pExpr->op==TK_EXISTS || pExpr->op==TK_SELECT );
-
       assert( ExprHasProperty(pExpr, EP_xIsSelect) );
+
       pSel = pExpr->x.pSelect;
-      sqlite3SelectDestInit(&dest, 0, ++pParse->nMem);
+      nReg = pExpr->op==TK_SELECT ? pSel->pEList->nExpr : 1;
+      sqlite3SelectDestInit(&dest, 0, pParse->nMem+1);
+      pParse->nMem += nReg;
       if( pExpr->op==TK_SELECT ){
         dest.eDest = SRT_Mem;
         dest.iSdst = dest.iSDParm;
-        sqlite3VdbeAddOp2(v, OP_Null, 0, dest.iSDParm);
+        dest.nSdst = nReg;
+        sqlite3VdbeAddOp3(v, OP_Null, 0, dest.iSDParm, dest.iSDParm+nReg-1);
         VdbeComment((v, "Init subquery result"));
       }else{
         dest.eDest = SRT_Exists;
         sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iSDParm);
         VdbeComment((v, "Init EXISTS result"));
       }
       sqlite3ExprDelete(pParse->db, pSel->pLimit);
-      pSel->pLimit = sqlite3PExpr(pParse, TK_INTEGER, 0, 0,
-                                  &sqlite3IntTokens[1]);
+      pSel->pLimit = sqlite3ExprAlloc(pParse->db, TK_INTEGER,
+                                  &sqlite3IntTokens[1], 0);
       pSel->iLimit = 0;
       pSel->selFlags &= ~SF_MultiValue;
       if( sqlite3Select(pParse, pSel, &dest) ){
@@ -91574,21 +92314,55 @@
 
 #ifndef SQLITE_OMIT_SUBQUERY
 /*
+** Expr pIn is an IN(...) expression. This function checks that the 
+** sub-select on the RHS of the IN() operator has the same number of 
+** columns as the vector on the LHS. Or, if the RHS of the IN() is not 
+** a sub-query, that the LHS is a vector of size 1.
+*/
+SQLITE_PRIVATE int sqlite3ExprCheckIN(Parse *pParse, Expr *pIn){
+  int nVector = sqlite3ExprVectorSize(pIn->pLeft);
+  if( (pIn->flags & EP_xIsSelect) ){
+    if( nVector!=pIn->x.pSelect->pEList->nExpr ){
+      sqlite3SubselectError(pParse, pIn->x.pSelect->pEList->nExpr, nVector);
+      return 1;
+    }
+  }else if( nVector!=1 ){
+    if( (pIn->pLeft->flags & EP_xIsSelect) ){
+      sqlite3SubselectError(pParse, nVector, 1);
+    }else{
+      sqlite3ErrorMsg(pParse, "row value misused");
+    }
+    return 1;
+  }
+  return 0;
+}
+#endif
+
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
 ** Generate code for an IN expression.
 **
 **      x IN (SELECT ...)
 **      x IN (value, value, ...)
 **
-** The left-hand side (LHS) is a scalar expression.  The right-hand side (RHS)
-** is an array of zero or more values.  The expression is true if the LHS is
-** contained within the RHS.  The value of the expression is unknown (NULL)
-** if the LHS is NULL or if the LHS is not contained within the RHS and the
-** RHS contains one or more NULL values.
+** The left-hand side (LHS) is a scalar or vector expression.  The 
+** right-hand side (RHS) is an array of zero or more scalar values, or a
+** subquery.  If the RHS is a subquery, the number of result columns must
+** match the number of columns in the vector on the LHS.  If the RHS is
+** a list of values, the LHS must be a scalar. 
 **
+** The IN operator is true if the LHS value is contained within the RHS.
+** The result is false if the LHS is definitely not in the RHS.  The 
+** result is NULL if the presence of the LHS in the RHS cannot be 
+** determined due to NULLs.
+**
 ** This routine generates code that jumps to destIfFalse if the LHS is not 
 ** contained within the RHS.  If due to NULLs we cannot determine if the LHS
 ** is contained in the RHS then jump to destIfNull.  If the LHS is contained
 ** within the RHS then fall through.
+**
+** See the separate in-operator.md documentation file in the canonical
+** SQLite source tree for additional information.
 */
 static void sqlite3ExprCodeIN(
   Parse *pParse,        /* Parsing and code generating context */
@@ -91597,36 +92371,83 @@
   int destIfNull        /* Jump here if the results are unknown due to NULLs */
 ){
   int rRhsHasNull = 0;  /* Register that is true if RHS contains NULL values */
-  char affinity;        /* Comparison affinity to use */
   int eType;            /* Type of the RHS */
-  int r1;               /* Temporary use register */
+  int rLhs;             /* Register(s) holding the LHS values */
+  int rLhsOrig;         /* LHS values prior to reordering by aiMap[] */
   Vdbe *v;              /* Statement under construction */
+  int *aiMap = 0;       /* Map from vector field to index column */
+  char *zAff = 0;       /* Affinity string for comparisons */
+  int nVector;          /* Size of vectors for this IN operator */
+  int iDummy;           /* Dummy parameter to exprCodeVector() */
+  Expr *pLeft;          /* The LHS of the IN operator */
+  int i;                /* loop counter */
+  int destStep2;        /* Where to jump when NULLs seen in step 2 */
+  int destStep6 = 0;    /* Start of code for Step 6 */
+  int addrTruthOp;      /* Address of opcode that determines the IN is true */
+  int destNotNull;      /* Jump here if a comparison is not true in step 6 */
+  int addrTop;          /* Top of the step-6 loop */ 
 
-  /* Compute the RHS.   After this step, the table with cursor
-  ** pExpr->iTable will contains the values that make up the RHS.
-  */
+  pLeft = pExpr->pLeft;
+  if( sqlite3ExprCheckIN(pParse, pExpr) ) return;
+  zAff = exprINAffinity(pParse, pExpr);
+  nVector = sqlite3ExprVectorSize(pExpr->pLeft);
+  aiMap = (int*)sqlite3DbMallocZero(
+      pParse->db, nVector*(sizeof(int) + sizeof(char)) + 1
+  );
+  if( pParse->db->mallocFailed ) goto sqlite3ExprCodeIN_oom_error;
+
+  /* Attempt to compute the RHS. After this step, if anything other than
+  ** IN_INDEX_NOOP is returned, the table opened ith cursor pExpr->iTable 
+  ** contains the values that make up the RHS. If IN_INDEX_NOOP is returned,
+  ** the RHS has not yet been coded.  */
   v = pParse->pVdbe;
   assert( v!=0 );       /* OOM detected prior to this routine */
   VdbeNoopComment((v, "begin IN expr"));
   eType = sqlite3FindInIndex(pParse, pExpr,
                              IN_INDEX_MEMBERSHIP | IN_INDEX_NOOP_OK,
-                             destIfFalse==destIfNull ? 0 : &rRhsHasNull);
+                             destIfFalse==destIfNull ? 0 : &rRhsHasNull, aiMap);
 
-  /* Figure out the affinity to use to create a key from the results
-  ** of the expression. affinityStr stores a static string suitable for
-  ** P4 of OP_MakeRecord.
-  */
-  affinity = comparisonAffinity(pExpr);
+  assert( pParse->nErr || nVector==1 || eType==IN_INDEX_EPH
+       || eType==IN_INDEX_INDEX_ASC || eType==IN_INDEX_INDEX_DESC 
+  );
+#ifdef SQLITE_DEBUG
+  /* Confirm that aiMap[] contains nVector integer values between 0 and
+  ** nVector-1. */
+  for(i=0; i<nVector; i++){
+    int j, cnt;
+    for(cnt=j=0; j<nVector; j++) if( aiMap[j]==i ) cnt++;
+    assert( cnt==1 );
+  }
+#endif
 
-  /* Code the LHS, the <expr> from "<expr> IN (...)".
+  /* Code the LHS, the <expr> from "<expr> IN (...)". If the LHS is a 
+  ** vector, then it is stored in an array of nVector registers starting 
+  ** at r1.
+  **
+  ** sqlite3FindInIndex() might have reordered the fields of the LHS vector
+  ** so that the fields are in the same order as an existing index.   The
+  ** aiMap[] array contains a mapping from the original LHS field order to
+  ** the field order that matches the RHS index.
   */
   sqlite3ExprCachePush(pParse);
-  r1 = sqlite3GetTempReg(pParse);
-  sqlite3ExprCode(pParse, pExpr->pLeft, r1);
+  rLhsOrig = exprCodeVector(pParse, pLeft, &iDummy);
+  for(i=0; i<nVector && aiMap[i]==i; i++){} /* Are LHS fields reordered? */
+  if( i==nVector ){
+    /* LHS fields are not reordered */
+    rLhs = rLhsOrig;
+  }else{
+    /* Need to reorder the LHS fields according to aiMap */
+    rLhs = sqlite3GetTempRange(pParse, nVector);
+    for(i=0; i<nVector; i++){
+      sqlite3VdbeAddOp3(v, OP_Copy, rLhsOrig+i, rLhs+aiMap[i], 0);
+    }
+  }
 
   /* If sqlite3FindInIndex() did not find or create an index that is
   ** suitable for evaluating the IN operator, then evaluate using a
   ** sequence of comparisons.
+  **
+  ** This is step (1) in the in-operator.md optimized algorithm.
   */
   if( eType==IN_INDEX_NOOP ){
     ExprList *pList = pExpr->x.pList;
@@ -91638,24 +92459,24 @@
     assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
     if( destIfNull!=destIfFalse ){
       regCkNull = sqlite3GetTempReg(pParse);
-      sqlite3VdbeAddOp3(v, OP_BitAnd, r1, r1, regCkNull);
+      sqlite3VdbeAddOp3(v, OP_BitAnd, rLhs, rLhs, regCkNull);
     }
     for(ii=0; ii<pList->nExpr; ii++){
       r2 = sqlite3ExprCodeTemp(pParse, pList->a[ii].pExpr, &regToFree);
       if( regCkNull && sqlite3ExprCanBeNull(pList->a[ii].pExpr) ){
         sqlite3VdbeAddOp3(v, OP_BitAnd, regCkNull, r2, regCkNull);
       }
       if( ii<pList->nExpr-1 || destIfNull!=destIfFalse ){
-        sqlite3VdbeAddOp4(v, OP_Eq, r1, labelOk, r2,
+        sqlite3VdbeAddOp4(v, OP_Eq, rLhs, labelOk, r2,
                           (void*)pColl, P4_COLLSEQ);
         VdbeCoverageIf(v, ii<pList->nExpr-1);
         VdbeCoverageIf(v, ii==pList->nExpr-1);
-        sqlite3VdbeChangeP5(v, affinity);
+        sqlite3VdbeChangeP5(v, zAff[0]);
       }else{
         assert( destIfNull==destIfFalse );
-        sqlite3VdbeAddOp4(v, OP_Ne, r1, destIfFalse, r2,
+        sqlite3VdbeAddOp4(v, OP_Ne, rLhs, destIfFalse, r2,
                           (void*)pColl, P4_COLLSEQ); VdbeCoverage(v);
-        sqlite3VdbeChangeP5(v, affinity | SQLITE_JUMPIFNULL);
+        sqlite3VdbeChangeP5(v, zAff[0] | SQLITE_JUMPIFNULL);
       }
       sqlite3ReleaseTempReg(pParse, regToFree);
     }
@@ -91665,77 +92486,113 @@
     }
     sqlite3VdbeResolveLabel(v, labelOk);
     sqlite3ReleaseTempReg(pParse, regCkNull);
+    goto sqlite3ExprCodeIN_finished;
+  }
+
+  /* Step 2: Check to see if the LHS contains any NULL columns.  If the
+  ** LHS does contain NULLs then the result must be either FALSE or NULL.
+  ** We will then skip the binary search of the RHS.
+  */
+  if( destIfNull==destIfFalse ){
+    destStep2 = destIfFalse;
   }else{
-  
-    /* If the LHS is NULL, then the result is either false or NULL depending
-    ** on whether the RHS is empty or not, respectively.
-    */
-    if( sqlite3ExprCanBeNull(pExpr->pLeft) ){
-      if( destIfNull==destIfFalse ){
-        /* Shortcut for the common case where the false and NULL outcomes are
-        ** the same. */
-        sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v);
-      }else{
-        int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v);
-        sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
-        VdbeCoverage(v);
-        sqlite3VdbeGoto(v, destIfNull);
-        sqlite3VdbeJumpHere(v, addr1);
-      }
-    }
-  
-    if( eType==IN_INDEX_ROWID ){
-      /* In this case, the RHS is the ROWID of table b-tree
-      */
-      sqlite3VdbeAddOp3(v, OP_SeekRowid, pExpr->iTable, destIfFalse, r1);
+    destStep2 = destStep6 = sqlite3VdbeMakeLabel(v);
+  }
+  for(i=0; i<nVector; i++){
+    Expr *p = sqlite3VectorFieldSubexpr(pExpr->pLeft, i);
+    if( sqlite3ExprCanBeNull(p) ){
+      sqlite3VdbeAddOp2(v, OP_IsNull, rLhs+i, destStep2);
       VdbeCoverage(v);
-    }else{
-      /* In this case, the RHS is an index b-tree.
-      */
-      sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1);
-  
-      /* If the set membership test fails, then the result of the 
-      ** "x IN (...)" expression must be either 0 or NULL. If the set
-      ** contains no NULL values, then the result is 0. If the set 
-      ** contains one or more NULL values, then the result of the
-      ** expression is also NULL.
-      */
-      assert( destIfFalse!=destIfNull || rRhsHasNull==0 );
-      if( rRhsHasNull==0 ){
-        /* This branch runs if it is known at compile time that the RHS
-        ** cannot contain NULL values. This happens as the result
-        ** of a "NOT NULL" constraint in the database schema.
-        **
-        ** Also run this branch if NULL is equivalent to FALSE
-        ** for this particular IN operator.
-        */
-        sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1);
-        VdbeCoverage(v);
-      }else{
-        /* In this branch, the RHS of the IN might contain a NULL and
-        ** the presence of a NULL on the RHS makes a difference in the
-        ** outcome.
-        */
-        int addr1;
-  
-        /* First check to see if the LHS is contained in the RHS.  If so,
-        ** then the answer is TRUE the presence of NULLs in the RHS does
-        ** not matter.  If the LHS is not contained in the RHS, then the
-        ** answer is NULL if the RHS contains NULLs and the answer is
-        ** FALSE if the RHS is NULL-free.
-        */
-        addr1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1);
-        VdbeCoverage(v);
-        sqlite3VdbeAddOp2(v, OP_IsNull, rRhsHasNull, destIfNull);
-        VdbeCoverage(v);
-        sqlite3VdbeGoto(v, destIfFalse);
-        sqlite3VdbeJumpHere(v, addr1);
-      }
     }
   }
-  sqlite3ReleaseTempReg(pParse, r1);
+
+  /* Step 3.  The LHS is now known to be non-NULL.  Do the binary search
+  ** of the RHS using the LHS as a probe.  If found, the result is
+  ** true.
+  */
+  if( eType==IN_INDEX_ROWID ){
+    /* In this case, the RHS is the ROWID of table b-tree and so we also
+    ** know that the RHS is non-NULL.  Hence, we combine steps 3 and 4
+    ** into a single opcode. */
+    sqlite3VdbeAddOp3(v, OP_SeekRowid, pExpr->iTable, destIfFalse, rLhs);
+    VdbeCoverage(v);
+    addrTruthOp = sqlite3VdbeAddOp0(v, OP_Goto);  /* Return True */
+  }else{
+    sqlite3VdbeAddOp4(v, OP_Affinity, rLhs, nVector, 0, zAff, nVector);
+    if( destIfFalse==destIfNull ){
+      /* Combine Step 3 and Step 5 into a single opcode */
+      sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse,
+                           rLhs, nVector); VdbeCoverage(v);
+      goto sqlite3ExprCodeIN_finished;
+    }
+    /* Ordinary Step 3, for the case where FALSE and NULL are distinct */
+    addrTruthOp = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0,
+                                      rLhs, nVector); VdbeCoverage(v);
+  }
+
+  /* Step 4.  If the RHS is known to be non-NULL and we did not find
+  ** an match on the search above, then the result must be FALSE.
+  */
+  if( rRhsHasNull && nVector==1 ){
+    sqlite3VdbeAddOp2(v, OP_NotNull, rRhsHasNull, destIfFalse);
+    VdbeCoverage(v);
+  }
+
+  /* Step 5.  If we do not care about the difference between NULL and
+  ** FALSE, then just return false. 
+  */
+  if( destIfFalse==destIfNull ) sqlite3VdbeGoto(v, destIfFalse);
+
+  /* Step 6: Loop through rows of the RHS.  Compare each row to the LHS.
+  ** If any comparison is NULL, then the result is NULL.  If all
+  ** comparisons are FALSE then the final result is FALSE.
+  **
+  ** For a scalar LHS, it is sufficient to check just the first row
+  ** of the RHS.
+  */
+  if( destStep6 ) sqlite3VdbeResolveLabel(v, destStep6);
+  addrTop = sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
+  VdbeCoverage(v);
+  if( nVector>1 ){
+    destNotNull = sqlite3VdbeMakeLabel(v);
+  }else{
+    /* For nVector==1, combine steps 6 and 7 by immediately returning
+    ** FALSE if the first comparison is not NULL */
+    destNotNull = destIfFalse;
+  }
+  for(i=0; i<nVector; i++){
+    Expr *p;
+    CollSeq *pColl;
+    int r3 = sqlite3GetTempReg(pParse);
+    p = sqlite3VectorFieldSubexpr(pLeft, i);
+    pColl = sqlite3ExprCollSeq(pParse, p);
+    sqlite3VdbeAddOp3(v, OP_Column, pExpr->iTable, i, r3);
+    sqlite3VdbeAddOp4(v, OP_Ne, rLhs+i, destNotNull, r3,
+                      (void*)pColl, P4_COLLSEQ);
+    VdbeCoverage(v);
+    sqlite3ReleaseTempReg(pParse, r3);
+  }
+  sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull);
+  if( nVector>1 ){
+    sqlite3VdbeResolveLabel(v, destNotNull);
+    sqlite3VdbeAddOp2(v, OP_Next, pExpr->iTable, addrTop+1);
+    VdbeCoverage(v);
+
+    /* Step 7:  If we reach this point, we know that the result must
+    ** be false. */
+    sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse);
+  }
+
+  /* Jumps here in order to return true. */
+  sqlite3VdbeJumpHere(v, addrTruthOp);
+
+sqlite3ExprCodeIN_finished:
+  if( rLhs!=rLhsOrig ) sqlite3ReleaseTempReg(pParse, rLhs);
   sqlite3ExprCachePop(pParse);
   VdbeComment((v, "end IN expr"));
+sqlite3ExprCodeIN_oom_error:
+  sqlite3DbFree(pParse->db, aiMap);
+  sqlite3DbFree(pParse->db, zAff);
 }
 #endif /* SQLITE_OMIT_SUBQUERY */
 
@@ -91799,32 +92656,19 @@
   }
 }
 
-#if defined(SQLITE_DEBUG)
 /*
-** Verify the consistency of the column cache
+** Erase column-cache entry number i
 */
-static int cacheIsValid(Parse *pParse){
-  int i, n;
-  for(i=n=0; i<SQLITE_N_COLCACHE; i++){
-    if( pParse->aColCache[i].iReg>0 ) n++;
-  }
-  return n==pParse->nColCache;
-}
-#endif
-
-/*
-** Clear a cache entry.
-*/
-static void cacheEntryClear(Parse *pParse, struct yColCache *p){
-  if( p->tempReg ){
+static void cacheEntryClear(Parse *pParse, int i){
+  if( pParse->aColCache[i].tempReg ){
     if( pParse->nTempReg<ArraySize(pParse->aTempReg) ){
-      pParse->aTempReg[pParse->nTempReg++] = p->iReg;
+      pParse->aTempReg[pParse->nTempReg++] = pParse->aColCache[i].iReg;
     }
-    p->tempReg = 0;
   }
-  p->iReg = 0;
   pParse->nColCache--;
-  assert( pParse->db->mallocFailed || cacheIsValid(pParse) );
+  if( i<pParse->nColCache ){
+    pParse->aColCache[i] = pParse->aColCache[pParse->nColCache];
+  }
 }
 
 
@@ -91854,60 +92698,48 @@
   ** that the object will never already be in cache.  Verify this guarantee.
   */
 #ifndef NDEBUG
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
-    assert( p->iReg==0 || p->iTable!=iTab || p->iColumn!=iCol );
+  for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
+    assert( p->iTable!=iTab || p->iColumn!=iCol );
   }
 #endif
 
-  /* Find an empty slot and replace it */
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
-    if( p->iReg==0 ){
-      p->iLevel = pParse->iCacheLevel;
-      p->iTable = iTab;
-      p->iColumn = iCol;
-      p->iReg = iReg;
-      p->tempReg = 0;
-      p->lru = pParse->iCacheCnt++;
-      pParse->nColCache++;
-      assert( pParse->db->mallocFailed || cacheIsValid(pParse) );
-      return;
+  /* If the cache is already full, delete the least recently used entry */
+  if( pParse->nColCache>=SQLITE_N_COLCACHE ){
+    minLru = 0x7fffffff;
+    idxLru = -1;
+    for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+      if( p->lru<minLru ){
+        idxLru = i;
+        minLru = p->lru;
+      }
     }
-  }
-
-  /* Replace the last recently used */
-  minLru = 0x7fffffff;
-  idxLru = -1;
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
-    if( p->lru<minLru ){
-      idxLru = i;
-      minLru = p->lru;
-    }
-  }
-  if( ALWAYS(idxLru>=0) ){
     p = &pParse->aColCache[idxLru];
-    p->iLevel = pParse->iCacheLevel;
-    p->iTable = iTab;
-    p->iColumn = iCol;
-    p->iReg = iReg;
-    p->tempReg = 0;
-    p->lru = pParse->iCacheCnt++;
-    assert( cacheIsValid(pParse) );
-    return;
+  }else{
+    p = &pParse->aColCache[pParse->nColCache++];
   }
+
+  /* Add the new entry to the end of the cache */
+  p->iLevel = pParse->iCacheLevel;
+  p->iTable = iTab;
+  p->iColumn = iCol;
+  p->iReg = iReg;
+  p->tempReg = 0;
+  p->lru = pParse->iCacheCnt++;
 }
 
 /*
 ** Indicate that registers between iReg..iReg+nReg-1 are being overwritten.
 ** Purge the range of registers from the column cache.
 */
 SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse *pParse, int iReg, int nReg){
-  struct yColCache *p;
-  if( iReg<=0 || pParse->nColCache==0 ) return;
-  p = &pParse->aColCache[SQLITE_N_COLCACHE-1];
-  while(1){
-    if( p->iReg >= iReg && p->iReg < iReg+nReg ) cacheEntryClear(pParse, p);
-    if( p==pParse->aColCache ) break;
-    p--;
+  int i = 0;
+  while( i<pParse->nColCache ){
+    struct yColCache *p = &pParse->aColCache[i];
+    if( p->iReg >= iReg && p->iReg < iReg+nReg ){
+      cacheEntryClear(pParse, i);
+    }else{
+      i++;
+    }
   }
 }
 
@@ -91931,18 +92763,19 @@
 ** the cache to the state it was in prior the most recent Push.
 */
 SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse){
-  int i;
-  struct yColCache *p;
+  int i = 0;
   assert( pParse->iCacheLevel>=1 );
   pParse->iCacheLevel--;
 #ifdef SQLITE_DEBUG
   if( pParse->db->flags & SQLITE_VdbeAddopTrace ){
     printf("POP  to %d\n", pParse->iCacheLevel);
   }
 #endif
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
-    if( p->iReg && p->iLevel>pParse->iCacheLevel ){
-      cacheEntryClear(pParse, p);
+  while( i<pParse->nColCache ){
+    if( pParse->aColCache[i].iLevel>pParse->iCacheLevel ){
+      cacheEntryClear(pParse, i);
+    }else{
+      i++;
     }
   }
 }
@@ -91956,7 +92789,7 @@
 static void sqlite3ExprCachePinRegister(Parse *pParse, int iReg){
   int i;
   struct yColCache *p;
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+  for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
     if( p->iReg==iReg ){
       p->tempReg = 0;
     }
@@ -92034,8 +92867,8 @@
   int i;
   struct yColCache *p;
 
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
-    if( p->iReg>0 && p->iTable==iTable && p->iColumn==iColumn ){
+  for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
+    if( p->iTable==iTable && p->iColumn==iColumn ){
       p->lru = pParse->iCacheCnt++;
       sqlite3ExprCachePinRegister(pParse, p->iReg);
       return p->iReg;
@@ -92067,18 +92900,20 @@
 */
 SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse *pParse){
   int i;
-  struct yColCache *p;
 
 #if SQLITE_DEBUG
   if( pParse->db->flags & SQLITE_VdbeAddopTrace ){
     printf("CLEAR\n");
   }
 #endif
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
-    if( p->iReg ){
-      cacheEntryClear(pParse, p);
+  for(i=0; i<pParse->nColCache; i++){
+    if( pParse->aColCache[i].tempReg
+     && pParse->nTempReg<ArraySize(pParse->aTempReg)
+    ){
+       pParse->aTempReg[pParse->nTempReg++] = pParse->aColCache[i].iReg;
     }
   }
+  pParse->nColCache = 0;
 }
 
 /*
@@ -92110,7 +92945,7 @@
 static int usedAsColumnCache(Parse *pParse, int iFrom, int iTo){
   int i;
   struct yColCache *p;
-  for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+  for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
     int r = p->iReg;
     if( r>=iFrom && r<=iTo ) return 1;    /*NO_TEST*/
   }
@@ -92120,7 +92955,9 @@
 
 
 /*
-** Convert an expression node to a TK_REGISTER
+** Convert a scalar expression node to a TK_REGISTER referencing
+** register iReg.  The caller must ensure that iReg already contains
+** the correct value for the expression.
 */
 static void exprToRegister(Expr *p, int iReg){
   p->op2 = p->op;
@@ -92130,6 +92967,38 @@
 }
 
 /*
+** Evaluate an expression (either a vector or a scalar expression) and store
+** the result in continguous temporary registers.  Return the index of
+** the first register used to store the result.
+**
+** If the returned result register is a temporary scalar, then also write
+** that register number into *piFreeable.  If the returned result register
+** is not a temporary or if the expression is a vector set *piFreeable
+** to 0.
+*/
+static int exprCodeVector(Parse *pParse, Expr *p, int *piFreeable){
+  int iResult;
+  int nResult = sqlite3ExprVectorSize(p);
+  if( nResult==1 ){
+    iResult = sqlite3ExprCodeTemp(pParse, p, piFreeable);
+  }else{
+    *piFreeable = 0;
+    if( p->op==TK_SELECT ){
+      iResult = sqlite3CodeSubselect(pParse, p, 0, 0);
+    }else{
+      int i;
+      iResult = pParse->nMem+1;
+      pParse->nMem += nResult;
+      for(i=0; i<nResult; i++){
+        sqlite3ExprCode(pParse, p->x.pList->a[i].pExpr, i+iResult);
+      }
+    }
+  }
+  return iResult;
+}
+
+
+/*
 ** Generate code into the current Vdbe to evaluate the given
 ** expression.  Attempt to store the results in register "target".
 ** Return the register where results are stored.
@@ -92146,9 +93015,9 @@
   int inReg = target;       /* Results stored in register inReg */
   int regFree1 = 0;         /* If non-zero free this temporary register */
   int regFree2 = 0;         /* If non-zero free this temporary register */
-  int r1, r2, r3, r4;       /* Various register numbers */
-  sqlite3 *db = pParse->db; /* The database connection */
+  int r1, r2;               /* Various register numbers */
   Expr tempX;               /* Temporary expression node */
+  int p5 = 0;
 
   assert( target>0 && target<=pParse->nMem );
   if( v==0 ){
@@ -92167,12 +93036,11 @@
       struct AggInfo_col *pCol = &pAggInfo->aCol[pExpr->iAgg];
       if( !pAggInfo->directMode ){
         assert( pCol->iMem>0 );
-        inReg = pCol->iMem;
-        break;
+        return pCol->iMem;
       }else if( pAggInfo->useSortingIdx ){
         sqlite3VdbeAddOp3(v, OP_Column, pAggInfo->sortingIdxPTab,
                               pCol->iSorterColumn, target);
-        break;
+        return target;
       }
       /* Otherwise, fall thru into the TK_COLUMN case */
     }
@@ -92181,38 +93049,36 @@
       if( iTab<0 ){
         if( pParse->ckBase>0 ){
           /* Generating CHECK constraints or inserting into partial index */
-          inReg = pExpr->iColumn + pParse->ckBase;
-          break;
+          return pExpr->iColumn + pParse->ckBase;
         }else{
           /* Coding an expression that is part of an index where column names
           ** in the index refer to the table to which the index belongs */
           iTab = pParse->iSelfTab;
         }
       }
-      inReg = sqlite3ExprCodeGetColumn(pParse, pExpr->pTab,
+      return sqlite3ExprCodeGetColumn(pParse, pExpr->pTab,
                                pExpr->iColumn, iTab, target,
                                pExpr->op2);
-      break;
     }
     case TK_INTEGER: {
       codeInteger(pParse, pExpr, 0, target);
-      break;
+      return target;
     }
 #ifndef SQLITE_OMIT_FLOATING_POINT
     case TK_FLOAT: {
       assert( !ExprHasProperty(pExpr, EP_IntValue) );
       codeReal(v, pExpr->u.zToken, 0, target);
-      break;
+      return target;
     }
 #endif
     case TK_STRING: {
       assert( !ExprHasProperty(pExpr, EP_IntValue) );
       sqlite3VdbeLoadString(v, target, pExpr->u.zToken);
-      break;
+      return target;
     }
     case TK_NULL: {
       sqlite3VdbeAddOp2(v, OP_Null, 0, target);
-      break;
+      return target;
     }
 #ifndef SQLITE_OMIT_BLOB_LITERAL
     case TK_BLOB: {
@@ -92227,7 +93093,7 @@
       assert( z[n]=='\'' );
       zBlob = sqlite3HexToBlob(sqlite3VdbeDb(v), z, n);
       sqlite3VdbeAddOp4(v, OP_Blob, n/2, target, 0, zBlob, P4_DYNAMIC);
-      break;
+      return target;
     }
 #endif
     case TK_VARIABLE: {
@@ -92240,11 +93106,10 @@
              || strcmp(pExpr->u.zToken, pParse->azVar[pExpr->iColumn-1])==0 );
         sqlite3VdbeChangeP4(v, -1, pParse->azVar[pExpr->iColumn-1], P4_STATIC);
       }
-      break;
+      return target;
     }
     case TK_REGISTER: {
-      inReg = pExpr->iTable;
-      break;
+      return pExpr->iTable;
     }
 #ifndef SQLITE_OMIT_CAST
     case TK_CAST: {
@@ -92258,44 +93123,39 @@
                         sqlite3AffinityType(pExpr->u.zToken, 0));
       testcase( usedAsColumnCache(pParse, inReg, inReg) );
       sqlite3ExprCacheAffinityChange(pParse, inReg, 1);
-      break;
+      return inReg;
     }
 #endif /* SQLITE_OMIT_CAST */
+    case TK_IS:
+    case TK_ISNOT:
+      op = (op==TK_IS) ? TK_EQ : TK_NE;
+      p5 = SQLITE_NULLEQ;
+      /* fall-through */
     case TK_LT:
     case TK_LE:
     case TK_GT:
     case TK_GE:
     case TK_NE:
     case TK_EQ: {
-      r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, &regFree1);
-      r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, &regFree2);
-      codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op,
-                  r1, r2, inReg, SQLITE_STOREP2);
-      assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt);
-      assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
-      assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
-      assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
-      assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
-      assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
-      testcase( regFree1==0 );
-      testcase( regFree2==0 );
+      Expr *pLeft = pExpr->pLeft;
+      if( sqlite3ExprIsVector(pLeft) ){
+        codeVectorCompare(pParse, pExpr, target, op, p5);
+      }else{
+        r1 = sqlite3ExprCodeTemp(pParse, pLeft, &regFree1);
+        r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, &regFree2);
+        codeCompare(pParse, pLeft, pExpr->pRight, op,
+            r1, r2, inReg, SQLITE_STOREP2 | p5);
+        assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt);
+        assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
+        assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
+        assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
+        assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
+        assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
+        testcase( regFree1==0 );
+        testcase( regFree2==0 );
+      }
       break;
     }
-    case TK_IS:
-    case TK_ISNOT: {
-      testcase( op==TK_IS );
-      testcase( op==TK_ISNOT );
-      r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, &regFree1);
-      r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, &regFree2);
-      op = (op==TK_IS) ? TK_EQ : TK_NE;
-      codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op,
-                  r1, r2, inReg, SQLITE_STOREP2 | SQLITE_NULLEQ);
-      VdbeCoverageIf(v, op==TK_EQ);
-      VdbeCoverageIf(v, op==TK_NE);
-      testcase( regFree1==0 );
-      testcase( regFree2==0 );
-      break;
-    }
     case TK_AND:
     case TK_OR:
     case TK_PLUS:
@@ -92331,10 +93191,12 @@
       assert( pLeft );
       if( pLeft->op==TK_INTEGER ){
         codeInteger(pParse, pLeft, 1, target);
+        return target;
 #ifndef SQLITE_OMIT_FLOATING_POINT
       }else if( pLeft->op==TK_FLOAT ){
         assert( !ExprHasProperty(pExpr, EP_IntValue) );
         codeReal(v, pLeft->u.zToken, 1, target);
+        return target;
 #endif
       }else{
         tempX.op = TK_INTEGER;
@@ -92345,7 +93207,6 @@
         sqlite3VdbeAddOp3(v, OP_Subtract, r2, r1, target);
         testcase( regFree2==0 );
       }
-      inReg = target;
       break;
     }
     case TK_BITNOT:
@@ -92354,7 +93215,6 @@
       assert( TK_NOT==OP_Not );         testcase( op==TK_NOT );
       r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, &regFree1);
       testcase( regFree1==0 );
-      inReg = target;
       sqlite3VdbeAddOp2(v, op, r1, inReg);
       break;
     }
@@ -92379,7 +93239,7 @@
         assert( !ExprHasProperty(pExpr, EP_IntValue) );
         sqlite3ErrorMsg(pParse, "misuse of aggregate: %s()", pExpr->u.zToken);
       }else{
-        inReg = pInfo->aFunc[pExpr->iAgg].iMem;
+        return pInfo->aFunc[pExpr->iAgg].iMem;
       }
       break;
     }
@@ -92390,6 +93250,7 @@
       const char *zId;       /* The function name */
       u32 constMask = 0;     /* Mask of function arguments that are constant */
       int i;                 /* Loop counter */
+      sqlite3 *db = pParse->db;  /* The database connection */
       u8 enc = ENC(db);      /* The text encoding used by this database */
       CollSeq *pColl = 0;    /* A collating sequence */
 
@@ -92438,8 +93299,7 @@
       */
       if( pDef->funcFlags & SQLITE_FUNC_UNLIKELY ){
         assert( nFarg>=1 );
-        inReg = sqlite3ExprCodeTarget(pParse, pFarg->a[0].pExpr, target);
-        break;
+        return sqlite3ExprCodeTarget(pParse, pFarg->a[0].pExpr, target);
       }
 
       for(i=0; i<nFarg; i++){
@@ -92514,16 +93374,27 @@
       if( nFarg && constMask==0 ){
         sqlite3ReleaseTempRange(pParse, r1, nFarg);
       }
-      break;
+      return target;
     }
 #ifndef SQLITE_OMIT_SUBQUERY
     case TK_EXISTS:
     case TK_SELECT: {
+      int nCol;
       testcase( op==TK_EXISTS );
       testcase( op==TK_SELECT );
-      inReg = sqlite3CodeSubselect(pParse, pExpr, 0, 0);
+      if( op==TK_SELECT && (nCol = pExpr->x.pSelect->pEList->nExpr)!=1 ){
+        sqlite3SubselectError(pParse, nCol, 1);
+      }else{
+        return sqlite3CodeSubselect(pParse, pExpr, 0, 0);
+      }
       break;
     }
+    case TK_SELECT_COLUMN: {
+      if( pExpr->pLeft->iTable==0 ){
+        pExpr->pLeft->iTable = sqlite3CodeSubselect(pParse, pExpr->pLeft, 0, 0);
+      }
+      return pExpr->pLeft->iTable + pExpr->iColumn;
+    }
     case TK_IN: {
       int destIfFalse = sqlite3VdbeMakeLabel(v);
       int destIfNull = sqlite3VdbeMakeLabel(v);
@@ -92533,7 +93404,7 @@
       sqlite3VdbeResolveLabel(v, destIfFalse);
       sqlite3VdbeAddOp2(v, OP_AddImm, target, 0);
       sqlite3VdbeResolveLabel(v, destIfNull);
-      break;
+      return target;
     }
 #endif /* SQLITE_OMIT_SUBQUERY */
 
@@ -92550,35 +93421,13 @@
     ** Z is stored in pExpr->pList->a[1].pExpr.
     */
     case TK_BETWEEN: {
-      Expr *pLeft = pExpr->pLeft;
-      struct ExprList_item *pLItem = pExpr->x.pList->a;
-      Expr *pRight = pLItem->pExpr;
-
-      r1 = sqlite3ExprCodeTemp(pParse, pLeft, &regFree1);
-      r2 = sqlite3ExprCodeTemp(pParse, pRight, &regFree2);
-      testcase( regFree1==0 );
-      testcase( regFree2==0 );
-      r3 = sqlite3GetTempReg(pParse);
-      r4 = sqlite3GetTempReg(pParse);
-      codeCompare(pParse, pLeft, pRight, OP_Ge,
-                  r1, r2, r3, SQLITE_STOREP2);  VdbeCoverage(v);
-      pLItem++;
-      pRight = pLItem->pExpr;
-      sqlite3ReleaseTempReg(pParse, regFree2);
-      r2 = sqlite3ExprCodeTemp(pParse, pRight, &regFree2);
-      testcase( regFree2==0 );
-      codeCompare(pParse, pLeft, pRight, OP_Le, r1, r2, r4, SQLITE_STOREP2);
-      VdbeCoverage(v);
-      sqlite3VdbeAddOp3(v, OP_And, r3, r4, target);
-      sqlite3ReleaseTempReg(pParse, r3);
-      sqlite3ReleaseTempReg(pParse, r4);
-      break;
+      exprCodeBetween(pParse, pExpr, target, 0, 0);
+      return target;
     }
     case TK_SPAN:
     case TK_COLLATE: 
     case TK_UPLUS: {
-      inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target);
-      break;
+      return sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target);
     }
 
     case TK_TRIGGER: {
@@ -92637,6 +93486,10 @@
       break;
     }
 
+    case TK_VECTOR: {
+      sqlite3ErrorMsg(pParse, "row value misused");
+      break;
+    }
 
     /*
     ** Form A:
@@ -92680,8 +93533,9 @@
       if( (pX = pExpr->pLeft)!=0 ){
         tempX = *pX;
         testcase( pX->op==TK_COLUMN );
-        exprToRegister(&tempX, sqlite3ExprCodeTemp(pParse, pX, &regFree1));
+        exprToRegister(&tempX, exprCodeVector(pParse, &tempX, &regFree1));
         testcase( regFree1==0 );
+        memset(&opCompare, 0, sizeof(opCompare));
         opCompare.op = TK_EQ;
         opCompare.pLeft = &tempX;
         pTest = &opCompare;
@@ -92715,7 +93569,7 @@
       }else{
         sqlite3VdbeAddOp2(v, OP_Null, 0, target);
       }
-      assert( db->mallocFailed || pParse->nErr>0 
+      assert( pParse->db->mallocFailed || pParse->nErr>0 
            || pParse->iCacheLevel==iCacheLevel );
       sqlite3VdbeResolveLabel(v, endLabel);
       break;
@@ -92960,20 +93814,33 @@
 **
 ** Code it as such, taking care to do the common subexpression
 ** elimination of x.
+**
+** The xJumpIf parameter determines details:
+**
+**    NULL:                   Store the boolean result in reg[dest]
+**    sqlite3ExprIfTrue:      Jump to dest if true
+**    sqlite3ExprIfFalse:     Jump to dest if false
+**
+** The jumpIfNull parameter is ignored if xJumpIf is NULL.
 */
 static void exprCodeBetween(
   Parse *pParse,    /* Parsing and code generating context */
   Expr *pExpr,      /* The BETWEEN expression */
-  int dest,         /* Jump here if the jump is taken */
-  int jumpIfTrue,   /* Take the jump if the BETWEEN is true */
+  int dest,         /* Jump destination or storage location */
+  void (*xJump)(Parse*,Expr*,int,int), /* Action to take */
   int jumpIfNull    /* Take the jump if the BETWEEN is NULL */
 ){
-  Expr exprAnd;     /* The AND operator in  x>=y AND x<=z  */
+ Expr exprAnd;     /* The AND operator in  x>=y AND x<=z  */
   Expr compLeft;    /* The  x>=y  term */
   Expr compRight;   /* The  x<=z  term */
   Expr exprX;       /* The  x  subexpression */
   int regFree1 = 0; /* Temporary use register */
 
+
+  memset(&compLeft, 0, sizeof(Expr));
+  memset(&compRight, 0, sizeof(Expr));
+  memset(&exprAnd, 0, sizeof(Expr));
+
   assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
   exprX = *pExpr->pLeft;
   exprAnd.op = TK_AND;
@@ -92985,23 +93852,25 @@
   compRight.op = TK_LE;
   compRight.pLeft = &exprX;
   compRight.pRight = pExpr->x.pList->a[1].pExpr;
-  exprToRegister(&exprX, sqlite3ExprCodeTemp(pParse, &exprX, &regFree1));
-  if( jumpIfTrue ){
-    sqlite3ExprIfTrue(pParse, &exprAnd, dest, jumpIfNull);
+  exprToRegister(&exprX, exprCodeVector(pParse, &exprX, &regFree1));
+  if( xJump ){
+    xJump(pParse, &exprAnd, dest, jumpIfNull);
   }else{
-    sqlite3ExprIfFalse(pParse, &exprAnd, dest, jumpIfNull);
+    exprX.flags |= EP_FromJoin;
+    sqlite3ExprCodeTarget(pParse, &exprAnd, dest);
   }
   sqlite3ReleaseTempReg(pParse, regFree1);
 
   /* Ensure adequate test coverage */
-  testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1==0 );
-  testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1!=0 );
-  testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1==0 );
-  testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1!=0 );
-  testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1==0 );
-  testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1!=0 );
-  testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1==0 );
-  testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1!=0 );
+  testcase( xJump==sqlite3ExprIfTrue  && jumpIfNull==0 && regFree1==0 );
+  testcase( xJump==sqlite3ExprIfTrue  && jumpIfNull==0 && regFree1!=0 );
+  testcase( xJump==sqlite3ExprIfTrue  && jumpIfNull!=0 && regFree1==0 );
+  testcase( xJump==sqlite3ExprIfTrue  && jumpIfNull!=0 && regFree1!=0 );
+  testcase( xJump==sqlite3ExprIfFalse && jumpIfNull==0 && regFree1==0 );
+  testcase( xJump==sqlite3ExprIfFalse && jumpIfNull==0 && regFree1!=0 );
+  testcase( xJump==sqlite3ExprIfFalse && jumpIfNull!=0 && regFree1==0 );
+  testcase( xJump==sqlite3ExprIfFalse && jumpIfNull!=0 && regFree1!=0 );
+  testcase( xJump==0 );
 }
 
 /*
@@ -93066,6 +93935,7 @@
     case TK_GE:
     case TK_NE:
     case TK_EQ: {
+      if( sqlite3ExprIsVector(pExpr->pLeft) ) goto default_expr;
       testcase( jumpIfNull==0 );
       r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, &regFree1);
       r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, &regFree2);
@@ -93098,7 +93968,7 @@
     }
     case TK_BETWEEN: {
       testcase( jumpIfNull==0 );
-      exprCodeBetween(pParse, pExpr, dest, 1, jumpIfNull);
+      exprCodeBetween(pParse, pExpr, dest, sqlite3ExprIfTrue, jumpIfNull);
       break;
     }
 #ifndef SQLITE_OMIT_SUBQUERY
@@ -93112,6 +93982,7 @@
     }
 #endif
     default: {
+    default_expr:
       if( exprAlwaysTrue(pExpr) ){
         sqlite3VdbeGoto(v, dest);
       }else if( exprAlwaysFalse(pExpr) ){
@@ -93218,6 +94089,7 @@
     case TK_GE:
     case TK_NE:
     case TK_EQ: {
+      if( sqlite3ExprIsVector(pExpr->pLeft) ) goto default_expr;
       testcase( jumpIfNull==0 );
       r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, &regFree1);
       r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, &regFree2);
@@ -93248,7 +94120,7 @@
     }
     case TK_BETWEEN: {
       testcase( jumpIfNull==0 );
-      exprCodeBetween(pParse, pExpr, dest, 0, jumpIfNull);
+      exprCodeBetween(pParse, pExpr, dest, sqlite3ExprIfFalse, jumpIfNull);
       break;
     }
 #ifndef SQLITE_OMIT_SUBQUERY
@@ -93264,6 +94136,7 @@
     }
 #endif
     default: {
+    default_expr: 
       if( exprAlwaysFalse(pExpr) ){
         sqlite3VdbeGoto(v, dest);
       }else if( exprAlwaysTrue(pExpr) ){
@@ -93768,7 +94641,7 @@
   if( iReg && pParse->nTempReg<ArraySize(pParse->aTempReg) ){
     int i;
     struct yColCache *p;
-    for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+    for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
       if( p->iReg==iReg ){
         p->tempReg = 1;
         return;
@@ -93779,10 +94652,11 @@
 }
 
 /*
-** Allocate or deallocate a block of nReg consecutive registers
+** Allocate or deallocate a block of nReg consecutive registers.
 */
 SQLITE_PRIVATE int sqlite3GetTempRange(Parse *pParse, int nReg){
   int i, n;
+  if( nReg==1 ) return sqlite3GetTempReg(pParse);
   i = pParse->iRangeReg;
   n = pParse->nRangeReg;
   if( nReg<=n ){
@@ -93796,6 +94670,10 @@
   return i;
 }
 SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse *pParse, int iReg, int nReg){
+  if( nReg==1 ){
+    sqlite3ReleaseTempReg(pParse, iReg);
+    return;
+  }
   sqlite3ExprCacheRemove(pParse, iReg, nReg);
   if( nReg>pParse->nRangeReg ){
     pParse->nRangeReg = nReg;
@@ -94251,7 +95129,7 @@
   pTab = sqlite3LocateTableItem(pParse, 0, &pSrc->a[0]);
   if( !pTab ) goto exit_rename_table;
   iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
-  zDb = db->aDb[iDb].zName;
+  zDb = db->aDb[iDb].zDbSName;
   db->flags |= SQLITE_PreferBuiltin;
 
   /* Get a NULL terminated version of the new table name. */
@@ -94449,7 +95327,7 @@
 
   assert( sqlite3BtreeHoldsAllMutexes(db) );
   iDb = sqlite3SchemaToIndex(db, pNew->pSchema);
-  zDb = db->aDb[iDb].zName;
+  zDb = db->aDb[iDb].zDbSName;
   zTab = &pNew->zName[16];  /* Skip the "sqlite_altertab_" prefix on the name */
   pCol = &pNew->aCol[pNew->nCol-1];
   pDflt = pCol->pDflt;
@@ -94859,14 +95737,14 @@
   for(i=0; i<ArraySize(aTable); i++){
     const char *zTab = aTable[i].zName;
     Table *pStat;
-    if( (pStat = sqlite3FindTable(db, zTab, pDb->zName))==0 ){
+    if( (pStat = sqlite3FindTable(db, zTab, pDb->zDbSName))==0 ){
       if( aTable[i].zCols ){
         /* The sqlite_statN table does not exist. Create it. Note that a 
         ** side-effect of the CREATE TABLE statement is to leave the rootpage 
         ** of the new table in register pParse->regRoot. This is important 
         ** because the OpenWrite opcode below will be needing it. */
         sqlite3NestedParse(pParse,
-            "CREATE TABLE %Q.%s(%s)", pDb->zName, zTab, aTable[i].zCols
+            "CREATE TABLE %Q.%s(%s)", pDb->zDbSName, zTab, aTable[i].zCols
         );
         aRoot[i] = pParse->regRoot;
         aCreateTbl[i] = OPFLAG_P2ISREG;
@@ -94881,7 +95759,7 @@
       if( zWhere ){
         sqlite3NestedParse(pParse,
            "DELETE FROM %Q.%s WHERE %s=%Q",
-           pDb->zName, zTab, zWhereType, zWhere
+           pDb->zDbSName, zTab, zWhereType, zWhere
         );
       }else{
         /* The sqlite_stat[134] table already exists.  Delete all rows. */
@@ -95643,7 +96521,7 @@
   assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
 #ifndef SQLITE_OMIT_AUTHORIZATION
   if( sqlite3AuthCheck(pParse, SQLITE_ANALYZE, pTab->zName, 0,
-      db->aDb[iDb].zName ) ){
+      db->aDb[iDb].zDbSName ) ){
     return;
   }
 #endif
@@ -96033,7 +96911,7 @@
     /* Form 3: Analyze the fully qualified table name */
     iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pTableName);
     if( iDb>=0 ){
-      zDb = db->aDb[iDb].zName;
+      zDb = db->aDb[iDb].zDbSName;
       z = sqlite3NameFromToken(db, pTableName);
       if( z ){
         if( (pIdx = sqlite3FindIndex(db, z, zDb))!=0 ){
@@ -96493,7 +97371,7 @@
 
   /* Load new statistics out of the sqlite_stat1 table */
   sInfo.db = db;
-  sInfo.zDatabase = db->aDb[iDb].zName;
+  sInfo.zDatabase = db->aDb[iDb].zDbSName;
   if( sqlite3FindTable(db, "sqlite_stat1", sInfo.zDatabase)!=0 ){
     zSql = sqlite3MPrintf(db, 
         "SELECT tbl,idx,stat FROM %Q.sqlite_stat1", sInfo.zDatabase);
@@ -96636,7 +97514,7 @@
     goto attach_error;
   }
   for(i=0; i<db->nDb; i++){
-    char *z = db->aDb[i].zName;
+    char *z = db->aDb[i].zDbSName;
     assert( z && zName );
     if( sqlite3StrICmp(z, zName)==0 ){
       zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName);
@@ -96701,8 +97579,8 @@
     sqlite3BtreeLeave(aNew->pBt);
   }
   aNew->safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1;
-  aNew->zName = sqlite3DbStrDup(db, zName);
-  if( rc==SQLITE_OK && aNew->zName==0 ){
+  aNew->zDbSName = sqlite3DbStrDup(db, zName);
+  if( rc==SQLITE_OK && aNew->zDbSName==0 ){
     rc = SQLITE_NOMEM_BKPT;
   }
 
@@ -96731,7 +97609,7 @@
       case SQLITE_NULL:
         /* No key specified.  Use the key from the main database */
         sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
-        if( nKey>0 || sqlite3BtreeGetOptimalReserve(db->aDb[0].pBt)>0 ){
+        if( nKey || sqlite3BtreeGetOptimalReserve(db->aDb[0].pBt)>0 ){
           rc = sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
         }
         break;
@@ -96814,7 +97692,7 @@
   for(i=0; i<db->nDb; i++){
     pDb = &db->aDb[i];
     if( pDb->pBt==0 ) continue;
-    if( sqlite3StrICmp(pDb->zName, zName)==0 ) break;
+    if( sqlite3StrICmp(pDb->zDbSName, zName)==0 ) break;
   }
 
   if( i>=db->nDb ){
@@ -96972,7 +97850,7 @@
   db = pParse->db;
   assert( db->nDb>iDb );
   pFix->pParse = pParse;
-  pFix->zDb = db->aDb[iDb].zName;
+  pFix->zDb = db->aDb[iDb].zDbSName;
   pFix->pSchema = db->aDb[iDb].pSchema;
   pFix->zType = zType;
   pFix->pName = pName;
@@ -97069,7 +97947,7 @@
         return 1;
       }
     }
-    if( ExprHasProperty(pExpr, EP_TokenOnly) ) break;
+    if( ExprHasProperty(pExpr, EP_TokenOnly|EP_Leaf) ) break;
     if( ExprHasProperty(pExpr, EP_xIsSelect) ){
       if( sqlite3FixSelect(pFix, pExpr->x.pSelect) ) return 1;
     }else{
@@ -97190,7 +98068,7 @@
 ** Setting the auth function to NULL disables this hook.  The default
 ** setting of the auth function is NULL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
   sqlite3 *db,
   int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
   void *pArg
@@ -97230,9 +98108,9 @@
   const char *zCol,               /* Column name */
   int iDb                         /* Index of containing database. */
 ){
-  sqlite3 *db = pParse->db;       /* Database handle */
-  char *zDb = db->aDb[iDb].zName; /* Name of attached database */
-  int rc;                         /* Auth callback return code */
+  sqlite3 *db = pParse->db;          /* Database handle */
+  char *zDb = db->aDb[iDb].zDbSName; /* Schema name of attached database */
+  int rc;                            /* Auth callback return code */
 
   if( db->init.busy ) return SQLITE_OK;
   rc = db->xAuth(db->pAuthArg, SQLITE_READ, zTab,zCol,zDb,pParse->zAuthContext
@@ -97533,15 +98411,14 @@
   assert( !pParse->isMultiWrite 
        || sqlite3VdbeAssertMayAbort(v, pParse->mayAbort));
   if( v ){
-    while( sqlite3VdbeDeletePriorOpcode(v, OP_Close) ){}
     sqlite3VdbeAddOp0(v, OP_Halt);
 
 #if SQLITE_USER_AUTHENTICATION
     if( pParse->nTableLock>0 && db->init.busy==0 ){
       sqlite3UserAuthInit(db);
       if( db->auth.authLevel<UAUTH_User ){
-        pParse->rc = SQLITE_AUTH_USER;
         sqlite3ErrorMsg(pParse, "user not authenticated");
+        pParse->rc = SQLITE_AUTH_USER;
         return;
       }
     }
@@ -97560,14 +98437,16 @@
       assert( sqlite3VdbeGetOp(v, 0)->opcode==OP_Init );
       sqlite3VdbeJumpHere(v, 0);
       for(iDb=0; iDb<db->nDb; iDb++){
+        Schema *pSchema;
         if( DbMaskTest(pParse->cookieMask, iDb)==0 ) continue;
         sqlite3VdbeUsesBtree(v, iDb);
+        pSchema = db->aDb[iDb].pSchema;
         sqlite3VdbeAddOp4Int(v,
           OP_Transaction,                    /* Opcode */
           iDb,                               /* P1 */
           DbMaskTest(pParse->writeMask,iDb), /* P2 */
-          pParse->cookieValue[iDb],          /* P3 */
-          db->aDb[iDb].pSchema->iGeneration  /* P4 */
+          pSchema->schema_cookie,            /* P3 */
+          pSchema->iGeneration               /* P4 */
         );
         if( db->init.busy==0 ) sqlite3VdbeChangeP5(v, 1);
         VdbeComment((v,
@@ -97618,16 +98497,6 @@
   }else{
     pParse->rc = SQLITE_ERROR;
   }
-
-  /* We are done with this Parse object. There is no need to de-initialize it */
-#if 0
-  pParse->colNamesSet = 0;
-  pParse->nTab = 0;
-  pParse->nMem = 0;
-  pParse->nSet = 0;
-  pParse->nVar = 0;
-  DbMaskZero(pParse->cookieMask);
-#endif
 }
 
 /*
@@ -97647,8 +98516,7 @@
   char *zSql;
   char *zErrMsg = 0;
   sqlite3 *db = pParse->db;
-# define SAVE_SZ  (sizeof(Parse) - offsetof(Parse,nVar))
-  char saveBuf[SAVE_SZ];
+  char saveBuf[PARSE_TAIL_SZ];
 
   if( pParse->nErr ) return;
   assert( pParse->nested<10 );  /* Nesting should only be of limited depth */
@@ -97659,12 +98527,12 @@
     return;   /* A malloc must have failed */
   }
   pParse->nested++;
-  memcpy(saveBuf, &pParse->nVar, SAVE_SZ);
-  memset(&pParse->nVar, 0, SAVE_SZ);
+  memcpy(saveBuf, PARSE_TAIL(pParse), PARSE_TAIL_SZ);
+  memset(PARSE_TAIL(pParse), 0, PARSE_TAIL_SZ);
   sqlite3RunParser(pParse, zSql, &zErrMsg);
   sqlite3DbFree(db, zErrMsg);
   sqlite3DbFree(db, zSql);
-  memcpy(&pParse->nVar, saveBuf, SAVE_SZ);
+  memcpy(PARSE_TAIL(pParse), saveBuf, PARSE_TAIL_SZ);
   pParse->nested--;
 }
 
@@ -97705,10 +98573,11 @@
 #endif
   for(i=OMIT_TEMPDB; i<db->nDb; i++){
     int j = (i<2) ? i^1 : i;   /* Search TEMP before MAIN */
-    if( zDatabase!=0 && sqlite3StrICmp(zDatabase, db->aDb[j].zName) ) continue;
-    assert( sqlite3SchemaMutexHeld(db, j, 0) );
-    p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName);
-    if( p ) break;
+    if( zDatabase==0 || sqlite3StrICmp(zDatabase, db->aDb[j].zDbSName)==0 ){
+      assert( sqlite3SchemaMutexHeld(db, j, 0) );
+      p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName);
+      if( p ) break;
+    }
   }
   return p;
 }
@@ -97782,7 +98651,7 @@
   assert( p->pSchema==0 || p->zDatabase==0 );
   if( p->pSchema ){
     int iDb = sqlite3SchemaToIndex(pParse->db, p->pSchema);
-    zDb = pParse->db->aDb[iDb].zName;
+    zDb = pParse->db->aDb[iDb].zDbSName;
   }else{
     zDb = p->zDatabase;
   }
@@ -97810,7 +98679,7 @@
     int j = (i<2) ? i^1 : i;  /* Search TEMP before MAIN */
     Schema *pSchema = db->aDb[j].pSchema;
     assert( pSchema );
-    if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zName) ) continue;
+    if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zDbSName) ) continue;
     assert( sqlite3SchemaMutexHeld(db, j, 0) );
     p = sqlite3HashFind(&pSchema->idxHash, zName);
     if( p ) break;
@@ -97879,8 +98748,8 @@
   for(i=j=2; i<db->nDb; i++){
     struct Db *pDb = &db->aDb[i];
     if( pDb->pBt==0 ){
-      sqlite3DbFree(db, pDb->zName);
-      pDb->zName = 0;
+      sqlite3DbFree(db, pDb->zDbSName);
+      pDb->zDbSName = 0;
       continue;
     }
     if( j<i ){
@@ -98100,7 +98969,7 @@
   if( zName ){
     Db *pDb;
     for(i=(db->nDb-1), pDb=&db->aDb[i]; i>=0; i--, pDb--){
-      if( 0==sqlite3StrICmp(pDb->zName, zName) ) break;
+      if( 0==sqlite3StrICmp(pDb->zDbSName, zName) ) break;
     }
   }
   return i;
@@ -98159,7 +99028,7 @@
       return -1;
     }
   }else{
-    assert( db->init.iDb==0 || db->init.busy );
+    assert( db->init.iDb==0 || db->init.busy || (db->flags & SQLITE_Vacuum)!=0);
     iDb = db->init.iDb;
     *pUnqual = pName1;
   }
@@ -98270,7 +99139,7 @@
        SQLITE_CREATE_VIEW,
        SQLITE_CREATE_TEMP_VIEW
     };
-    char *zDb = db->aDb[iDb].zName;
+    char *zDb = db->aDb[iDb].zDbSName;
     if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(isTemp), 0, zDb) ){
       goto begin_table_error;
     }
@@ -98289,7 +99158,7 @@
   ** collisions.
   */
   if( !IN_DECLARE_VTAB ){
-    char *zDb = db->aDb[iDb].zName;
+    char *zDb = db->aDb[iDb].zDbSName;
     if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){
       goto begin_table_error;
     }
@@ -98844,6 +99713,9 @@
 ** set back to prior value.  But schema changes are infrequent
 ** and the probability of hitting the same cookie value is only
 ** 1 chance in 2^32.  So we're safe enough.
+**
+** IMPLEMENTATION-OF: R-34230-56049 SQLite automatically increments
+** the schema-version whenever the schema changes.
 */
 SQLITE_PRIVATE void sqlite3ChangeCookie(Parse *pParse, int iDb){
   sqlite3 *db = pParse->db;
@@ -99382,7 +100254,7 @@
       "UPDATE %Q.%s "
          "SET type='%s', name=%Q, tbl_name=%Q, rootpage=#%d, sql=%Q "
        "WHERE rowid=#%d",
-      db->aDb[iDb].zName, SCHEMA_TABLE(iDb),
+      db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb),
       zType,
       p->zName,
       p->zName,
@@ -99397,13 +100269,13 @@
     /* Check to see if we need to create an sqlite_sequence table for
     ** keeping track of autoincrement keys.
     */
-    if( p->tabFlags & TF_Autoincrement ){
+    if( (p->tabFlags & TF_Autoincrement)!=0 ){
       Db *pDb = &db->aDb[iDb];
       assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
       if( pDb->pSchema->pSeqTab==0 ){
         sqlite3NestedParse(pParse,
           "CREATE TABLE %Q.sqlite_sequence(name,seq)",
-          pDb->zName
+          pDb->zDbSName
         );
       }
     }
@@ -99527,7 +100399,9 @@
   int nErr = 0;     /* Number of errors encountered */
   int n;            /* Temporarily holds the number of cursors assigned */
   sqlite3 *db = pParse->db;  /* Database connection for malloc errors */
+#ifndef SQLITE_OMIT_AUTHORIZATION
   sqlite3_xauth xAuth;       /* Saved xAuth pointer */
+#endif
 
   assert( pTable );
 
@@ -99717,7 +100591,7 @@
   */
   sqlite3NestedParse(pParse, 
      "UPDATE %Q.%s SET rootpage=%d WHERE #%d AND rootpage=#%d",
-     pParse->db->aDb[iDb].zName, SCHEMA_TABLE(iDb), iTable, r1, r1);
+     pParse->db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), iTable, r1, r1);
 #endif
   sqlite3ReleaseTempReg(pParse, r1);
 }
@@ -99793,7 +100667,7 @@
   const char *zName      /* Name of index or table */
 ){
   int i;
-  const char *zDbName = pParse->db->aDb[iDb].zName;
+  const char *zDbName = pParse->db->aDb[iDb].zDbSName;
   for(i=1; i<=4; i++){
     char zTab[24];
     sqlite3_snprintf(sizeof(zTab),zTab,"sqlite_stat%d",i);
@@ -99846,7 +100720,7 @@
   if( pTab->tabFlags & TF_Autoincrement ){
     sqlite3NestedParse(pParse,
       "DELETE FROM %Q.sqlite_sequence WHERE name=%Q",
-      pDb->zName, pTab->zName
+      pDb->zDbSName, pTab->zName
     );
   }
 #endif
@@ -99860,7 +100734,7 @@
   */
   sqlite3NestedParse(pParse, 
       "DELETE FROM %Q.%s WHERE tbl_name=%Q and type!='trigger'",
-      pDb->zName, SCHEMA_TABLE(iDb), pTab->zName);
+      pDb->zDbSName, SCHEMA_TABLE(iDb), pTab->zName);
   if( !isView && !IsVirtual(pTab) ){
     destroyTable(pParse, pTab);
   }
@@ -99914,7 +100788,7 @@
   {
     int code;
     const char *zTab = SCHEMA_TABLE(iDb);
-    const char *zDb = db->aDb[iDb].zName;
+    const char *zDb = db->aDb[iDb].zDbSName;
     const char *zArg2 = 0;
     if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb)){
       goto exit_drop_table;
@@ -100155,7 +101029,7 @@
 
 #ifndef SQLITE_OMIT_AUTHORIZATION
   if( sqlite3AuthCheck(pParse, SQLITE_REINDEX, pIndex->zName, 0,
-      db->aDb[iDb].zName ) ){
+      db->aDb[iDb].zDbSName ) ){
     return;
   }
 #endif
@@ -100407,7 +101281,7 @@
         goto exit_create_index;
       }
     }
-    if( sqlite3FindIndex(db, zName, pDb->zName)!=0 ){
+    if( sqlite3FindIndex(db, zName, pDb->zDbSName)!=0 ){
       if( !ifNotExist ){
         sqlite3ErrorMsg(pParse, "index %s already exists", zName);
       }else{
@@ -100437,7 +101311,7 @@
   */
 #ifndef SQLITE_OMIT_AUTHORIZATION
   {
-    const char *zDb = pDb->zName;
+    const char *zDb = pDb->zDbSName;
     if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iDb), 0, zDb) ){
       goto exit_create_index;
     }
@@ -100752,7 +101626,7 @@
     */
     sqlite3NestedParse(pParse, 
         "INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);",
-        db->aDb[iDb].zName, SCHEMA_TABLE(iDb),
+        db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb),
         pIndex->zName,
         pTab->zName,
         iMem,
@@ -100886,7 +101760,7 @@
   {
     int code = SQLITE_DROP_INDEX;
     Table *pTab = pIndex->pTable;
-    const char *zDb = db->aDb[iDb].zName;
+    const char *zDb = db->aDb[iDb].zDbSName;
     const char *zTab = SCHEMA_TABLE(iDb);
     if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){
       goto exit_drop_index;
@@ -100904,7 +101778,7 @@
     sqlite3BeginWriteOperation(pParse, 1, iDb);
     sqlite3NestedParse(pParse,
        "DELETE FROM %Q.%s WHERE name=%Q AND type='index'",
-       db->aDb[iDb].zName, SCHEMA_TABLE(iDb), pIndex->zName
+       db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), pIndex->zName
     );
     sqlite3ClearStatTables(pParse, iDb, "idx", pIndex->zName);
     sqlite3ChangeCookie(pParse, iDb);
@@ -101425,15 +102299,13 @@
 */
 SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse *pParse, int iDb){
   Parse *pToplevel = sqlite3ParseToplevel(pParse);
-  sqlite3 *db = pToplevel->db;
 
-  assert( iDb>=0 && iDb<db->nDb );
-  assert( db->aDb[iDb].pBt!=0 || iDb==1 );
+  assert( iDb>=0 && iDb<pParse->db->nDb );
+  assert( pParse->db->aDb[iDb].pBt!=0 || iDb==1 );
   assert( iDb<SQLITE_MAX_ATTACHED+2 );
-  assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
+  assert( sqlite3SchemaMutexHeld(pParse->db, iDb, 0) );
   if( DbMaskTest(pToplevel->cookieMask, iDb)==0 ){
     DbMaskSet(pToplevel->cookieMask, iDb);
-    pToplevel->cookieValue[iDb] = db->aDb[iDb].pSchema->schema_cookie;
     if( !OMIT_TEMPDB && iDb==1 ){
       sqlite3OpenTempDatabase(pToplevel);
     }
@@ -101449,7 +102321,7 @@
   int i;
   for(i=0; i<db->nDb; i++){
     Db *pDb = &db->aDb[i];
-    if( pDb->pBt && (!zDb || 0==sqlite3StrICmp(zDb, pDb->zName)) ){
+    if( pDb->pBt && (!zDb || 0==sqlite3StrICmp(zDb, pDb->zDbSName)) ){
       sqlite3CodeVerifySchema(pParse, i);
     }
   }
@@ -101696,7 +102568,7 @@
   if( iDb<0 ) return;
   z = sqlite3NameFromToken(db, pObjName);
   if( z==0 ) return;
-  zDb = db->aDb[iDb].zName;
+  zDb = db->aDb[iDb].zDbSName;
   pTab = sqlite3FindTable(db, z, zDb);
   if( pTab ){
     reindexTable(pParse, pTab, 0);
@@ -102410,7 +103282,7 @@
   if( pFrom ){
     assert( pFrom->nSrc==1 );
     pFrom->a[0].zName = sqlite3DbStrDup(db, pView->zName);
-    pFrom->a[0].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName);
+    pFrom->a[0].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zDbSName);
     assert( pFrom->a[0].pOn==0 );
     assert( pFrom->a[0].pUsing==0 );
   }
@@ -102520,7 +103392,6 @@
 ){
   Vdbe *v;               /* The virtual database engine */
   Table *pTab;           /* The table from which records will be deleted */
-  const char *zDb;       /* Name of database holding pTab */
   int i;                 /* Loop counter */
   WhereInfo *pWInfo;     /* Information about the WHERE clause */
   Index *pIdx;           /* For looping over indices of the table */
@@ -102597,8 +103468,8 @@
   }
   iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
   assert( iDb<db->nDb );
-  zDb = db->aDb[iDb].zName;
-  rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb);
+  rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, 
+                            db->aDb[iDb].zDbSName);
   assert( rcauth==SQLITE_OK || rcauth==SQLITE_DENY || rcauth==SQLITE_IGNORE );
   if( rcauth==SQLITE_DENY ){
     goto delete_from_cleanup;
@@ -102782,7 +103653,7 @@
     if( !isView ){
       int iAddrOnce = 0;
       if( eOnePass==ONEPASS_MULTI ){
-        iAddrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+        iAddrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
       }
       testcase( IsVirtual(pTab) );
       sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, OPFLAG_FORDELETE,
@@ -103960,14 +104831,14 @@
 /*
 ** The sqlite3_strglob() interface.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlobPattern, const char *zString){
+SQLITE_API int sqlite3_strglob(const char *zGlobPattern, const char *zString){
   return patternCompare((u8*)zGlobPattern, (u8*)zString, &globInfo, '[')==0;
 }
 
 /*
 ** The sqlite3_strlike() interface.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zPattern, const char *zStr, unsigned int esc){
+SQLITE_API int sqlite3_strlike(const char *zPattern, const char *zStr, unsigned int esc){
   return patternCompare((u8*)zPattern, (u8*)zStr, &likeInfoNorm, esc)==0;
 }
 
@@ -105929,7 +106800,7 @@
   if( (db->flags&SQLITE_ForeignKeys)==0 ) return;
 
   iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
-  zDb = db->aDb[iDb].zName;
+  zDb = db->aDb[iDb].zDbSName;
 
   /* Loop through all the foreign key constraints for which pTab is the
   ** child table (the table that the foreign key definition is part of).  */
@@ -106300,10 +107171,10 @@
           if( pDflt ){
             pNew = sqlite3ExprDup(db, pDflt, 0);
           }else{
-            pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0);
+            pNew = sqlite3ExprAlloc(db, TK_NULL, 0, 0);
           }
         }else{
-          pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0);
+          pNew = sqlite3ExprAlloc(db, TK_NULL, 0, 0);
         }
         pList = sqlite3ExprListAppend(pParse, pList, pNew);
         sqlite3ExprListSetName(pParse, pList, &tFromCol, 0);
@@ -106669,7 +107540,9 @@
 /*
 ** Locate or create an AutoincInfo structure associated with table pTab
 ** which is in database iDb.  Return the register number for the register
-** that holds the maximum rowid.
+** that holds the maximum rowid.  Return zero if pTab is not an AUTOINCREMENT
+** table.  (Also return zero when doing a VACUUM since we do not want to
+** update the AUTOINCREMENT counters during a VACUUM.)
 **
 ** There is at most one AutoincInfo structure per table even if the
 ** same table is autoincremented multiple times due to inserts within
@@ -106692,7 +107565,9 @@
   Table *pTab         /* The table we are writing to */
 ){
   int memId = 0;      /* Register holding maximum rowid */
-  if( pTab->tabFlags & TF_Autoincrement ){
+  if( (pTab->tabFlags & TF_Autoincrement)!=0
+   && (pParse->db->flags & SQLITE_Vacuum)==0
+  ){
     Parse *pToplevel = sqlite3ParseToplevel(pParse);
     AutoincInfo *pInfo;
 
@@ -106950,7 +107825,6 @@
   sqlite3 *db;          /* The main database structure */
   Table *pTab;          /* The table to insert into.  aka TABLE */
   char *zTab;           /* Name of the table into which we are inserting */
-  const char *zDb;      /* Name of the database holding this table */
   int i, j, idx;        /* Loop counters */
   Vdbe *v;              /* Generate code into this virtual machine */
   Index *pIdx;          /* For looping over indices of the table */
@@ -106965,7 +107839,6 @@
   int addrCont = 0;     /* Top of insert loop. Label "C" in templates 3 and 4 */
   SelectDest dest;      /* Destination for SELECT on rhs of INSERT */
   int iDb;              /* Index of database holding TABLE */
-  Db *pDb;              /* The database containing table being inserted into */
   u8 useTempTable = 0;  /* Store SELECT results in intermediate table */
   u8 appendFlag = 0;    /* True if the insert is likely to be an append */
   u8 withoutRowid;      /* 0 for normal table.  1 for WITHOUT ROWID table */
@@ -107015,9 +107888,8 @@
   }
   iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
   assert( iDb<db->nDb );
-  pDb = &db->aDb[iDb];
-  zDb = pDb->zName;
-  if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0, zDb) ){
+  if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0,
+                       db->aDb[iDb].zDbSName) ){
     goto insert_cleanup;
   }
   withoutRowid = !HasRowid(pTab);
@@ -108246,16 +109118,16 @@
   for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
     int iIdxCur = iBase++;
     assert( pIdx->pSchema==pTab->pSchema );
+    if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){
+      if( piDataCur ) *piDataCur = iIdxCur;
+      p5 = 0;
+    }
     if( aToOpen==0 || aToOpen[i+1] ){
       sqlite3VdbeAddOp3(v, op, iIdxCur, pIdx->tnum, iDb);
       sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
+      sqlite3VdbeChangeP5(v, p5);
       VdbeComment((v, "%s", pIdx->zName));
     }
-    if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){
-      if( piDataCur ) *piDataCur = iIdxCur;
-    }else{
-      sqlite3VdbeChangeP5(v, p5);
-    }
   }
   if( iBase>pParse->nTab ) pParse->nTab = iBase;
   return i;
@@ -108645,6 +109517,7 @@
   sqlite3ReleaseTempReg(pParse, regRowid);
   sqlite3ReleaseTempReg(pParse, regData);
   if( emptyDestTest ){
+    sqlite3AutoincrementEnd(pParse);
     sqlite3VdbeAddOp2(v, OP_Halt, SQLITE_OK, 0);
     sqlite3VdbeJumpHere(v, emptyDestTest);
     sqlite3VdbeAddOp2(v, OP_Close, iDest, 0);
@@ -108686,7 +109559,7 @@
 ** argument to xCallback().  If xCallback=NULL then no callback
 ** is invoked, even for queries.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
   sqlite3 *db,                /* The database on which the SQL executes */
   const char *zSql,           /* The SQL to be executed */
   sqlite3_callback xCallback, /* Invoke this callback routine */
@@ -109948,7 +110821,7 @@
   db->aExtension[db->nExtension++] = handle;
   return SQLITE_OK;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
   sqlite3 *db,          /* Load the extension into this database connection */
   const char *zFile,    /* Name of the shared library containing extension */
   const char *zProc,    /* Entry point.  Use "sqlite3_extension_init" if 0 */
@@ -109979,7 +110852,7 @@
 ** Enable or disable extension loading.  Extension loading is disabled by
 ** default so as not to open security holes in older applications.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff){
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff){
   sqlite3_mutex_enter(db->mutex);
   if( onoff ){
     db->flags |= SQLITE_LoadExtension|SQLITE_LoadExtFunc;
@@ -109990,20 +110863,9 @@
   return SQLITE_OK;
 }
 
-#endif /* SQLITE_OMIT_LOAD_EXTENSION */
+#endif /* !defined(SQLITE_OMIT_LOAD_EXTENSION) */
 
 /*
-** The auto-extension code added regardless of whether or not extension
-** loading is supported.  We need a dummy sqlite3Apis pointer for that
-** code if regular extension loading is not available.  This is that
-** dummy pointer.
-*/
-#ifdef SQLITE_OMIT_LOAD_EXTENSION
-static const sqlite3_api_routines sqlite3Apis = { 0 };
-#endif
-
-
-/*
 ** The following object holds the list of automatically loaded
 ** extensions.
 **
@@ -110036,7 +110898,7 @@
 ** Register a statically linked extension that is automatically
 ** loaded by every new database connection.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(
+SQLITE_API int sqlite3_auto_extension(
   void (*xInit)(void)
 ){
   int rc = SQLITE_OK;
@@ -110083,7 +110945,7 @@
 ** Return 1 if xInit was found on the list and removed.  Return 0 if xInit
 ** was not on the list.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(
+SQLITE_API int sqlite3_cancel_auto_extension(
   void (*xInit)(void)
 ){
 #if SQLITE_THREADSAFE
@@ -110108,7 +110970,7 @@
 /*
 ** Reset the automatic extension loading mechanism.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void){
+SQLITE_API void sqlite3_reset_auto_extension(void){
 #ifndef SQLITE_OMIT_AUTOINIT
   if( sqlite3_initialize()==SQLITE_OK )
 #endif
@@ -110146,6 +111008,11 @@
 #if SQLITE_THREADSAFE
     sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
 #endif
+#ifdef SQLITE_OMIT_LOAD_EXTENSION
+    const sqlite3_api_routines *pThunk = 0;
+#else
+    const sqlite3_api_routines *pThunk = &sqlite3Apis;
+#endif
     sqlite3_mutex_enter(mutex);
     if( i>=wsdAutoext.nExt ){
       xInit = 0;
@@ -110155,7 +111022,7 @@
     }
     sqlite3_mutex_leave(mutex);
     zErrmsg = 0;
-    if( xInit && (rc = xInit(db, &zErrmsg, &sqlite3Apis))!=0 ){
+    if( xInit && (rc = xInit(db, &zErrmsg, pThunk))!=0 ){
       sqlite3ErrorWithMsg(db, rc,
             "automatic extension loading failed: %s", zErrmsg);
       go = 0;
@@ -110974,7 +111841,7 @@
   }
 
   assert( pId2 );
-  zDb = pId2->n>0 ? pDb->zName : 0;
+  zDb = pId2->n>0 ? pDb->zDbSName : 0;
   if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
     goto pragma_out;
   }
@@ -111827,10 +112694,10 @@
     setAllColumnNames(v, 3, azCol); assert( 3==ArraySize(azCol) );
     for(i=0; i<db->nDb; i++){
       if( db->aDb[i].pBt==0 ) continue;
-      assert( db->aDb[i].zName!=0 );
+      assert( db->aDb[i].zDbSName!=0 );
       sqlite3VdbeMultiLoad(v, 1, "iss",
          i,
-         db->aDb[i].zName,
+         db->aDb[i].zDbSName,
          sqlite3BtreeGetFilename(db->aDb[i].pBt));
       sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
     }
@@ -112119,7 +112986,7 @@
       sqlite3VdbeChangeP5(v, (u8)i);
       addr = sqlite3VdbeAddOp1(v, OP_IsNull, 2); VdbeCoverage(v);
       sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
-         sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName),
+         sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zDbSName),
          P4_DYNAMIC);
       sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1);
       sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2);
@@ -112558,15 +113425,15 @@
       Btree *pBt;
       const char *zState = "unknown";
       int j;
-      if( db->aDb[i].zName==0 ) continue;
+      if( db->aDb[i].zDbSName==0 ) continue;
       pBt = db->aDb[i].pBt;
       if( pBt==0 || sqlite3BtreePager(pBt)==0 ){
         zState = "closed";
-      }else if( sqlite3_file_control(db, i ? db->aDb[i].zName : 0, 
+      }else if( sqlite3_file_control(db, i ? db->aDb[i].zDbSName : 0, 
                                      SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){
          zState = azLockName[j];
       }
-      sqlite3VdbeMultiLoad(v, 1, "ss", db->aDb[i].zName, zState);
+      sqlite3VdbeMultiLoad(v, 1, "ss", db->aDb[i].zDbSName, zState);
       sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
     }
     break;
@@ -112702,6 +113569,7 @@
     ** structures that describe the table, index, or view.
     */
     int rc;
+    u8 saved_iDb = db->init.iDb;
     sqlite3_stmt *pStmt;
     TESTONLY(int rcp);            /* Return code from sqlite3_prepare() */
 
@@ -112712,7 +113580,8 @@
     TESTONLY(rcp = ) sqlite3_prepare(db, argv[2], -1, &pStmt, 0);
     rc = db->errCode;
     assert( (rc&0xFF)==(rcp&0xFF) );
-    db->init.iDb = 0;
+    db->init.iDb = saved_iDb;
+    assert( saved_iDb==0 || (db->flags & SQLITE_Vacuum)!=0 );
     if( SQLITE_OK!=rc ){
       if( db->init.orphanTrigger ){
         assert( iDb==1 );
@@ -112736,7 +113605,7 @@
     ** to do here is record the root page number for that index.
     */
     Index *pIndex;
-    pIndex = sqlite3FindIndex(db, argv[0], db->aDb[iDb].zName);
+    pIndex = sqlite3FindIndex(db, argv[0], db->aDb[iDb].zDbSName);
     if( pIndex==0 ){
       /* This can occur if there exists an index on a TEMP table which
       ** has the same name as another index on a permanent index.  Since
@@ -112915,7 +113784,7 @@
     char *zSql;
     zSql = sqlite3MPrintf(db, 
         "SELECT name, rootpage, sql FROM \"%w\".%s ORDER BY rowid",
-        db->aDb[iDb].zName, zMasterName);
+        db->aDb[iDb].zDbSName, zMasterName);
 #ifndef SQLITE_OMIT_AUTHORIZATION
     {
       sqlite3_xauth xAuth;
@@ -113145,18 +114014,14 @@
   sqlite3_stmt **ppStmt,    /* OUT: A pointer to the prepared statement */
   const char **pzTail       /* OUT: End of parsed string */
 ){
-  Parse *pParse;            /* Parsing context */
   char *zErrMsg = 0;        /* Error message */
   int rc = SQLITE_OK;       /* Result code */
   int i;                    /* Loop counter */
+  Parse sParse;             /* Parsing context */
 
-  /* Allocate the parsing context */
-  pParse = sqlite3StackAllocZero(db, sizeof(*pParse));
-  if( pParse==0 ){
-    rc = SQLITE_NOMEM_BKPT;
-    goto end_prepare;
-  }
-  pParse->pReprepare = pReprepare;
+  memset(&sParse, 0, PARSE_HDR_SZ);
+  memset(PARSE_TAIL(&sParse), 0, PARSE_TAIL_SZ);
+  sParse.pReprepare = pReprepare;
   assert( ppStmt && *ppStmt==0 );
   /* assert( !db->mallocFailed ); // not true with SQLITE_USE_ALLOCA */
   assert( sqlite3_mutex_held(db->mutex) );
@@ -113190,7 +114055,7 @@
       assert( sqlite3BtreeHoldsMutex(pBt) );
       rc = sqlite3BtreeSchemaLocked(pBt);
       if( rc ){
-        const char *zDb = db->aDb[i].zName;
+        const char *zDb = db->aDb[i].zDbSName;
         sqlite3ErrorWithMsg(db, rc, "database schema is locked: %s", zDb);
         testcase( db->flags & SQLITE_ReadUncommitted );
         goto end_prepare;
@@ -113200,8 +114065,7 @@
 
   sqlite3VtabUnlockList(db);
 
-  pParse->db = db;
-  pParse->nQueryLoop = 0;  /* Logarithmic, so 0 really means 1 */
+  sParse.db = db;
   if( nBytes>=0 && (nBytes==0 || zSql[nBytes-1]!=0) ){
     char *zSqlCopy;
     int mxLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH];
@@ -113214,61 +114078,61 @@
     }
     zSqlCopy = sqlite3DbStrNDup(db, zSql, nBytes);
     if( zSqlCopy ){
-      sqlite3RunParser(pParse, zSqlCopy, &zErrMsg);
-      pParse->zTail = &zSql[pParse->zTail-zSqlCopy];
+      sqlite3RunParser(&sParse, zSqlCopy, &zErrMsg);
+      sParse.zTail = &zSql[sParse.zTail-zSqlCopy];
       sqlite3DbFree(db, zSqlCopy);
     }else{
-      pParse->zTail = &zSql[nBytes];
+      sParse.zTail = &zSql[nBytes];
     }
   }else{
-    sqlite3RunParser(pParse, zSql, &zErrMsg);
+    sqlite3RunParser(&sParse, zSql, &zErrMsg);
   }
-  assert( 0==pParse->nQueryLoop );
+  assert( 0==sParse.nQueryLoop );
 
-  if( pParse->rc==SQLITE_DONE ) pParse->rc = SQLITE_OK;
-  if( pParse->checkSchema ){
-    schemaIsValid(pParse);
+  if( sParse.rc==SQLITE_DONE ) sParse.rc = SQLITE_OK;
+  if( sParse.checkSchema ){
+    schemaIsValid(&sParse);
   }
   if( db->mallocFailed ){
-    pParse->rc = SQLITE_NOMEM_BKPT;
+    sParse.rc = SQLITE_NOMEM_BKPT;
   }
   if( pzTail ){
-    *pzTail = pParse->zTail;
+    *pzTail = sParse.zTail;
   }
-  rc = pParse->rc;
+  rc = sParse.rc;
 
 #ifndef SQLITE_OMIT_EXPLAIN
-  if( rc==SQLITE_OK && pParse->pVdbe && pParse->explain ){
+  if( rc==SQLITE_OK && sParse.pVdbe && sParse.explain ){
     static const char * const azColName[] = {
        "addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment",
        "selectid", "order", "from", "detail"
     };
     int iFirst, mx;
-    if( pParse->explain==2 ){
-      sqlite3VdbeSetNumCols(pParse->pVdbe, 4);
+    if( sParse.explain==2 ){
+      sqlite3VdbeSetNumCols(sParse.pVdbe, 4);
       iFirst = 8;
       mx = 12;
     }else{
-      sqlite3VdbeSetNumCols(pParse->pVdbe, 8);
+      sqlite3VdbeSetNumCols(sParse.pVdbe, 8);
       iFirst = 0;
       mx = 8;
     }
     for(i=iFirst; i<mx; i++){
-      sqlite3VdbeSetColName(pParse->pVdbe, i-iFirst, COLNAME_NAME,
+      sqlite3VdbeSetColName(sParse.pVdbe, i-iFirst, COLNAME_NAME,
                             azColName[i], SQLITE_STATIC);
     }
   }
 #endif
 
   if( db->init.busy==0 ){
-    Vdbe *pVdbe = pParse->pVdbe;
-    sqlite3VdbeSetSql(pVdbe, zSql, (int)(pParse->zTail-zSql), saveSqlFlag);
+    Vdbe *pVdbe = sParse.pVdbe;
+    sqlite3VdbeSetSql(pVdbe, zSql, (int)(sParse.zTail-zSql), saveSqlFlag);
   }
-  if( pParse->pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){
-    sqlite3VdbeFinalize(pParse->pVdbe);
+  if( sParse.pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){
+    sqlite3VdbeFinalize(sParse.pVdbe);
     assert(!(*ppStmt));
   }else{
-    *ppStmt = (sqlite3_stmt*)pParse->pVdbe;
+    *ppStmt = (sqlite3_stmt*)sParse.pVdbe;
   }
 
   if( zErrMsg ){
@@ -113279,16 +114143,15 @@
   }
 
   /* Delete any TriggerPrg structures allocated while parsing this statement. */
-  while( pParse->pTriggerPrg ){
-    TriggerPrg *pT = pParse->pTriggerPrg;
-    pParse->pTriggerPrg = pT->pNext;
+  while( sParse.pTriggerPrg ){
+    TriggerPrg *pT = sParse.pTriggerPrg;
+    sParse.pTriggerPrg = pT->pNext;
     sqlite3DbFree(db, pT);
   }
 
 end_prepare:
 
-  sqlite3ParserReset(pParse);
-  sqlite3StackFree(db, pParse);
+  sqlite3ParserReset(&sParse);
   rc = sqlite3ApiExit(db, rc);
   assert( (rc&db->errMask)==rc );
   return rc;
@@ -113369,7 +114232,7 @@
 ** and the statement is automatically recompiled if an schema change
 ** occurs.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
   sqlite3 *db,              /* Database handle. */
   const char *zSql,         /* UTF-8 encoded SQL statement. */
   int nBytes,               /* Length of zSql in bytes. */
@@ -113381,7 +114244,7 @@
   assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 );  /* VERIFY: F13021 */
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
   sqlite3 *db,              /* Database handle. */
   const char *zSql,         /* UTF-8 encoded SQL statement. */
   int nBytes,               /* Length of zSql in bytes. */
@@ -113457,7 +114320,7 @@
 ** and the statement is automatically recompiled if an schema change
 ** occurs.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
   sqlite3 *db,              /* Database handle. */ 
   const void *zSql,         /* UTF-16 encoded SQL statement. */
   int nBytes,               /* Length of zSql in bytes. */
@@ -113469,7 +114332,7 @@
   assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 );  /* VERIFY: F13021 */
   return rc;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
   sqlite3 *db,              /* Database handle. */ 
   const void *zSql,         /* UTF-16 encoded SQL statement. */
   int nBytes,               /* Length of zSql in bytes. */
@@ -113576,7 +114439,7 @@
 SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest *pDest, int eDest, int iParm){
   pDest->eDest = (u8)eDest;
   pDest->iSDParm = iParm;
-  pDest->affSdst = 0;
+  pDest->zAffSdst = 0;
   pDest->iSdst = 0;
   pDest->nSdst = 0;
 }
@@ -114147,31 +115010,7 @@
   sqlite3ReleaseTempReg(pParse, r1);
 }
 
-#ifndef SQLITE_OMIT_SUBQUERY
 /*
-** Generate an error message when a SELECT is used within a subexpression
-** (example:  "a IN (SELECT * FROM table)") but it has more than 1 result
-** column.  We do this in a subroutine because the error used to occur
-** in multiple places.  (The error only occurs in one place now, but we
-** retain the subroutine to minimize code disruption.)
-*/
-static int checkForMultiColumnSelectError(
-  Parse *pParse,       /* Parse context. */
-  SelectDest *pDest,   /* Destination of SELECT results */
-  int nExpr            /* Number of result columns returned by SELECT */
-){
-  int eDest = pDest->eDest;
-  if( nExpr>1 && (eDest==SRT_Mem || eDest==SRT_Set) ){
-    sqlite3ErrorMsg(pParse, "only a single result allowed for "
-       "a SELECT that is part of an expression");
-    return 1;
-  }else{
-    return 0;
-  }
-}
-#endif
-
-/*
 ** This routine generates the code for the inside of the inner loop
 ** of a SELECT.
 **
@@ -114380,19 +115219,19 @@
     ** item into the set table with bogus data.
     */
     case SRT_Set: {
-      assert( nResultCol==1 );
-      pDest->affSdst =
-                  sqlite3CompareAffinity(pEList->a[0].pExpr, pDest->affSdst);
       if( pSort ){
         /* At first glance you would think we could optimize out the
         ** ORDER BY in this case since the order of entries in the set
         ** does not matter.  But there might be a LIMIT clause, in which
         ** case the order does matter */
-        pushOntoSorter(pParse, pSort, p, regResult, regResult, 1, nPrefixReg);
+        pushOntoSorter(
+            pParse, pSort, p, regResult, regResult, nResultCol, nPrefixReg);
       }else{
         int r1 = sqlite3GetTempReg(pParse);
-        sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult,1,r1, &pDest->affSdst, 1);
-        sqlite3ExprCacheAffinityChange(pParse, regResult, 1);
+        assert( sqlite3Strlen30(pDest->zAffSdst)==nResultCol );
+        sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, nResultCol, 
+            r1, pDest->zAffSdst, nResultCol);
+        sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol);
         sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
         sqlite3ReleaseTempReg(pParse, r1);
       }
@@ -114408,13 +115247,14 @@
     }
 
     /* If this is a scalar select that is part of an expression, then
-    ** store the results in the appropriate memory cell and break out
-    ** of the scan loop.
+    ** store the results in the appropriate memory cell or array of 
+    ** memory cells and break out of the scan loop.
     */
     case SRT_Mem: {
-      assert( nResultCol==1 );
+      assert( nResultCol==pDest->nSdst );
       if( pSort ){
-        pushOntoSorter(pParse, pSort, p, regResult, regResult, 1, nPrefixReg);
+        pushOntoSorter(
+            pParse, pSort, p, regResult, regResult, nResultCol, nPrefixReg);
       }else{
         assert( regResult==iParm );
         /* The LIMIT clause will jump out of the loop for us */
@@ -114516,7 +115356,7 @@
 */
 SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoAlloc(sqlite3 *db, int N, int X){
   int nExtra = (N+X)*(sizeof(CollSeq*)+1);
-  KeyInfo *p = sqlite3DbMallocRaw(db, sizeof(KeyInfo) + nExtra);
+  KeyInfo *p = sqlite3DbMallocRawNN(db, sizeof(KeyInfo) + nExtra);
   if( p ){
     p->aSortOrder = (u8*)&p->aColl[N+X];
     p->nField = (u16)N;
@@ -114729,21 +115569,21 @@
     sqlite3VdbeResolveLabel(v, pSort->labelBkOut);
   }
   iTab = pSort->iECursor;
-  if( eDest==SRT_Output || eDest==SRT_Coroutine ){
+  if( eDest==SRT_Output || eDest==SRT_Coroutine || eDest==SRT_Mem ){
     regRowid = 0;
     regRow = pDest->iSdst;
     nSortData = nColumn;
   }else{
     regRowid = sqlite3GetTempReg(pParse);
-    regRow = sqlite3GetTempReg(pParse);
-    nSortData = 1;
+    regRow = sqlite3GetTempRange(pParse, nColumn);
+    nSortData = nColumn;
   }
   nKey = pOrderBy->nExpr - pSort->nOBSat;
   if( pSort->sortFlags & SORTFLAG_UseSorter ){
     int regSortOut = ++pParse->nMem;
     iSortTab = pParse->nTab++;
     if( pSort->labelBkOut ){
-      addrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+      addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
     }
     sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData);
     if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
@@ -114771,16 +115611,14 @@
     }
 #ifndef SQLITE_OMIT_SUBQUERY
     case SRT_Set: {
-      assert( nColumn==1 );
-      sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, 1, regRowid,
-                        &pDest->affSdst, 1);
-      sqlite3ExprCacheAffinityChange(pParse, regRow, 1);
+      assert( nColumn==sqlite3Strlen30(pDest->zAffSdst) );
+      sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, nColumn, regRowid,
+                        pDest->zAffSdst, nColumn);
+      sqlite3ExprCacheAffinityChange(pParse, regRow, nColumn);
       sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, regRowid);
       break;
     }
     case SRT_Mem: {
-      assert( nColumn==1 );
-      sqlite3ExprCodeMove(pParse, regRow, iParm, 1);
       /* The LIMIT clause will terminate the loop for us */
       break;
     }
@@ -114799,7 +115637,11 @@
     }
   }
   if( regRowid ){
-    sqlite3ReleaseTempReg(pParse, regRow);
+    if( eDest==SRT_Set ){
+      sqlite3ReleaseTempRange(pParse, regRow, nColumn);
+    }else{
+      sqlite3ReleaseTempReg(pParse, regRow);
+    }
     sqlite3ReleaseTempReg(pParse, regRowid);
   }
   /* The bottom of the loop
@@ -114946,7 +115788,7 @@
         zOrigTab = pTab->zName;
         if( pNC->pParse ){
           int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema);
-          zOrigDb = pNC->pParse->db->aDb[iDb].zName;
+          zOrigDb = pNC->pParse->db->aDb[iDb].zDbSName;
         }
 #else
         if( iCol<0 ){
@@ -115301,7 +116143,7 @@
 */
 static SQLITE_NOINLINE Vdbe *allocVdbe(Parse *pParse){
   Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(pParse);
-  if( v ) sqlite3VdbeAddOp0(v, OP_Init);
+  if( v ) sqlite3VdbeAddOp2(v, OP_Init, 0, 1);
   if( pParse->pToplevel==0
    && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst)
   ){
@@ -116140,18 +116982,15 @@
     }
 
 #ifndef SQLITE_OMIT_SUBQUERY
-    /* If we are creating a set for an "expr IN (SELECT ...)" construct,
-    ** then there should be a single item on the stack.  Write this
-    ** item into the set table with bogus data.
+    /* If we are creating a set for an "expr IN (SELECT ...)".
     */
     case SRT_Set: {
       int r1;
-      assert( pIn->nSdst==1 || pParse->nErr>0 );
-      pDest->affSdst = 
-         sqlite3CompareAffinity(p->pEList->a[0].pExpr, pDest->affSdst);
+      testcase( pIn->nSdst>1 );
       r1 = sqlite3GetTempReg(pParse);
-      sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, 1, r1, &pDest->affSdst,1);
-      sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, 1);
+      sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, 
+          r1, pDest->zAffSdst, pIn->nSdst);
+      sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst);
       sqlite3VdbeAddOp2(v, OP_IdxInsert, pDest->iSDParm, r1);
       sqlite3ReleaseTempReg(pParse, r1);
       break;
@@ -117207,12 +118046,13 @@
       assert( pParent->pHaving==0 );
       pParent->pHaving = pParent->pWhere;
       pParent->pWhere = pWhere;
-      pParent->pHaving = sqlite3ExprAnd(db, pParent->pHaving, 
-                                  sqlite3ExprDup(db, pSub->pHaving, 0));
+      pParent->pHaving = sqlite3ExprAnd(db, 
+          sqlite3ExprDup(db, pSub->pHaving, 0), pParent->pHaving
+      );
       assert( pParent->pGroupBy==0 );
       pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0);
     }else{
-      pParent->pWhere = sqlite3ExprAnd(db, pParent->pWhere, pWhere);
+      pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere);
     }
     substSelect(db, pParent, iParent, pSub->pEList, 0);
   
@@ -117902,7 +118742,7 @@
               continue;
             }
             iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
-            zSchemaName = iDb>=0 ? db->aDb[iDb].zName : "*";
+            zSchemaName = iDb>=0 ? db->aDb[iDb].zDbSName : "*";
           }
           for(j=0; j<pTab->nCol; j++){
             char *zName = pTab->aCol[j].zName;
@@ -118385,16 +119225,6 @@
   }
 #endif
 
-
-  /* If writing to memory or generating a set
-  ** only a single column may be output.
-  */
-#ifndef SQLITE_OMIT_SUBQUERY
-  if( checkForMultiColumnSelectError(pParse, pDest, p->pEList->nExpr) ){
-    goto select_end;
-  }
-#endif
-
   /* Try to flatten subqueries in the FROM clause up into the main query
   */
 #if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
@@ -118549,7 +119379,7 @@
         /* If the subquery is not correlated and if we are not inside of
         ** a trigger, then we only need to compute the value of the subquery
         ** once. */
-        onceAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+        onceAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
         VdbeComment((v, "materialize \"%s\"", pItem->pTab->zName));
       }else{
         VdbeNoopComment((v, "materialize \"%s\"", pItem->pTab->zName));
@@ -119312,7 +120142,7 @@
 ** Instead, the entire table should be passed to sqlite3_free_table() when
 ** the calling procedure is finished using it.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
   sqlite3 *db,                /* The database on which the SQL executes */
   const char *zSql,           /* The SQL to be executed */
   char ***pazResult,          /* Write the result table here */
@@ -119381,7 +120211,7 @@
 /*
 ** This routine frees the space the sqlite3_get_table() malloced.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(
+SQLITE_API void sqlite3_free_table(
   char **azResult            /* Result returned from sqlite3_get_table() */
 ){
   if( azResult ){
@@ -119496,7 +120326,6 @@
   int iDb;                /* The database to store the trigger in */
   Token *pName;           /* The unqualified db name */
   DbFixer sFix;           /* State vector for the DB fixer */
-  int iTabDb;             /* Index of the database holding pTab */
 
   assert( pName1!=0 );   /* pName1->z might be NULL, but not pName1 itself */
   assert( pName2!=0 );
@@ -119609,13 +120438,13 @@
         " trigger on table: %S", pTableName, 0);
     goto trigger_cleanup;
   }
-  iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
 
 #ifndef SQLITE_OMIT_AUTHORIZATION
   {
+    int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
     int code = SQLITE_CREATE_TRIGGER;
-    const char *zDb = db->aDb[iTabDb].zName;
-    const char *zDbTrig = isTemp ? db->aDb[1].zName : zDb;
+    const char *zDb = db->aDb[iTabDb].zDbSName;
+    const char *zDbTrig = isTemp ? db->aDb[1].zDbSName : zDb;
     if( iTabDb==1 || isTemp ) code = SQLITE_CREATE_TEMP_TRIGGER;
     if( sqlite3AuthCheck(pParse, code, zName, pTab->zName, zDbTrig) ){
       goto trigger_cleanup;
@@ -119709,7 +120538,7 @@
     z = sqlite3DbStrNDup(db, (char*)pAll->z, pAll->n);
     sqlite3NestedParse(pParse,
        "INSERT INTO %Q.%s VALUES('trigger',%Q,%Q,0,'CREATE TRIGGER %q')",
-       db->aDb[iDb].zName, SCHEMA_TABLE(iDb), zName,
+       db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), zName,
        pTrig->table, z);
     sqlite3DbFree(db, z);
     sqlite3ChangeCookie(pParse, iDb);
@@ -119898,7 +120727,7 @@
   assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) );
   for(i=OMIT_TEMPDB; i<db->nDb; i++){
     int j = (i<2) ? i^1 : i;  /* Search TEMP before MAIN */
-    if( zDb && sqlite3StrICmp(db->aDb[j].zName, zDb) ) continue;
+    if( zDb && sqlite3StrICmp(db->aDb[j].zDbSName, zDb) ) continue;
     assert( sqlite3SchemaMutexHeld(db, j, 0) );
     pTrigger = sqlite3HashFind(&(db->aDb[j].pSchema->trigHash), zName);
     if( pTrigger ) break;
@@ -119944,7 +120773,7 @@
 #ifndef SQLITE_OMIT_AUTHORIZATION
   {
     int code = SQLITE_DROP_TRIGGER;
-    const char *zDb = db->aDb[iDb].zName;
+    const char *zDb = db->aDb[iDb].zDbSName;
     const char *zTab = SCHEMA_TABLE(iDb);
     if( iDb==1 ) code = SQLITE_DROP_TEMP_TRIGGER;
     if( sqlite3AuthCheck(pParse, code, pTrigger->zName, pTable->zName, zDb) ||
@@ -119960,7 +120789,7 @@
   if( (v = sqlite3GetVdbe(pParse))!=0 ){
     sqlite3NestedParse(pParse,
        "DELETE FROM %Q.%s WHERE name=%Q AND type='trigger'",
-       db->aDb[iDb].zName, SCHEMA_TABLE(iDb), pTrigger->zName
+       db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb), pTrigger->zName
     );
     sqlite3ChangeCookie(pParse, iDb);
     sqlite3VdbeAddOp4(v, OP_DropTrigger, iDb, 0, 0, pTrigger->zName, 0);
@@ -120063,8 +120892,10 @@
     pSrc->a[pSrc->nSrc-1].zName = sqlite3DbStrDup(db, pStep->zTarget);
     iDb = sqlite3SchemaToIndex(db, pStep->pTrig->pSchema);
     if( iDb==0 || iDb>=2 ){
+      const char *zDb;
       assert( iDb<db->nDb );
-      pSrc->a[pSrc->nSrc-1].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName);
+      zDb = db->aDb[iDb].zDbSName;
+      pSrc->a[pSrc->nSrc-1].zDatabase =  sqlite3DbStrDup(db, zDb);
     }
   }
   return pSrc;
@@ -120278,7 +121109,6 @@
     }
     pProgram->nMem = pSubParse->nMem;
     pProgram->nCsr = pSubParse->nTab;
-    pProgram->nOnce = pSubParse->nOnce;
     pProgram->token = (void *)pTrigger;
     pPrg->aColmask[0] = pSubParse->oldmask;
     pPrg->aColmask[1] = pSubParse->newmask;
@@ -120751,7 +121581,7 @@
       int rc;
       rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
                             j<0 ? "ROWID" : pTab->aCol[j].zName,
-                            db->aDb[iDb].zName);
+                            db->aDb[iDb].zDbSName);
       if( rc==SQLITE_DENY ){
         goto update_cleanup;
       }else if( rc==SQLITE_IGNORE ){
@@ -121353,58 +122183,53 @@
 /* #include "vdbeInt.h" */
 
 #if !defined(SQLITE_OMIT_VACUUM) && !defined(SQLITE_OMIT_ATTACH)
-/*
-** Finalize a prepared statement.  If there was an error, store the
-** text of the error message in *pzErrMsg.  Return the result code.
-*/
-static int vacuumFinalize(sqlite3 *db, sqlite3_stmt *pStmt, char **pzErrMsg){
-  int rc;
-  rc = sqlite3VdbeFinalize((Vdbe*)pStmt);
-  if( rc ){
-    sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db));
-  }
-  return rc;
-}
 
 /*
-** Execute zSql on database db. Return an error code.
+** Execute zSql on database db.
+**
+** If zSql returns rows, then each row will have exactly one
+** column.  (This will only happen if zSql begins with "SELECT".)
+** Take each row of result and call execSql() again recursively.
+**
+** The execSqlF() routine does the same thing, except it accepts
+** a format string as its third argument
 */
 static int execSql(sqlite3 *db, char **pzErrMsg, const char *zSql){
   sqlite3_stmt *pStmt;
-  VVA_ONLY( int rc; )
-  if( !zSql ){
-    return SQLITE_NOMEM_BKPT;
-  }
-  if( SQLITE_OK!=sqlite3_prepare(db, zSql, -1, &pStmt, 0) ){
-    sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db));
-    return sqlite3_errcode(db);
-  }
-  VVA_ONLY( rc = ) sqlite3_step(pStmt);
-  assert( rc!=SQLITE_ROW || (db->flags&SQLITE_CountRows) );
-  return vacuumFinalize(db, pStmt, pzErrMsg);
-}
-
-/*
-** Execute zSql on database db. The statement returns exactly
-** one column. Execute this as SQL on the same database.
-*/
-static int execExecSql(sqlite3 *db, char **pzErrMsg, const char *zSql){
-  sqlite3_stmt *pStmt;
   int rc;
 
-  rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0);
+  /* printf("SQL: [%s]\n", zSql); fflush(stdout); */
+  rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0);
   if( rc!=SQLITE_OK ) return rc;
-
-  while( SQLITE_ROW==sqlite3_step(pStmt) ){
-    rc = execSql(db, pzErrMsg, (char*)sqlite3_column_text(pStmt, 0));
-    if( rc!=SQLITE_OK ){
-      vacuumFinalize(db, pStmt, pzErrMsg);
-      return rc;
+  while( SQLITE_ROW==(rc = sqlite3_step(pStmt)) ){
+    const char *zSubSql = (const char*)sqlite3_column_text(pStmt,0);
+    assert( sqlite3_strnicmp(zSql,"SELECT",6)==0 );
+    if( zSubSql ){
+      assert( zSubSql[0]!='S' );
+      rc = execSql(db, pzErrMsg, zSubSql);
+      if( rc!=SQLITE_OK ) break;
     }
   }
-
-  return vacuumFinalize(db, pStmt, pzErrMsg);
+  assert( rc!=SQLITE_ROW );
+  if( rc==SQLITE_DONE ) rc = SQLITE_OK;
+  if( rc ){
+    sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db));
+  }
+  (void)sqlite3_finalize(pStmt);
+  return rc;
 }
+static int execSqlF(sqlite3 *db, char **pzErrMsg, const char *zSql, ...){
+  char *z;
+  va_list ap;
+  int rc;
+  va_start(ap, zSql);
+  z = sqlite3VMPrintf(db, zSql, ap);
+  va_end(ap);
+  if( z==0 ) return SQLITE_NOMEM;
+  rc = execSql(db, pzErrMsg, z);
+  sqlite3DbFree(db, z);
+  return rc;
+}
 
 /*
 ** The VACUUM command is used to clean up the database,
@@ -121436,23 +122261,23 @@
 ** transient would cause the database file to appear to be deleted
 ** following reboot.
 */
-SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse){
+SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse, Token *pNm){
   Vdbe *v = sqlite3GetVdbe(pParse);
-  if( v ){
-    sqlite3VdbeAddOp2(v, OP_Vacuum, 0, 0);
-    sqlite3VdbeUsesBtree(v, 0);
+  int iDb = pNm ? sqlite3TwoPartName(pParse, pNm, pNm, &pNm) : 0;
+  if( v && (iDb>=2 || iDb==0) ){
+    sqlite3VdbeAddOp1(v, OP_Vacuum, iDb);
+    sqlite3VdbeUsesBtree(v, iDb);
   }
   return;
 }
 
 /*
 ** This routine implements the OP_Vacuum opcode of the VDBE.
 */
-SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db){
+SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){
   int rc = SQLITE_OK;     /* Return code from service routines */
   Btree *pMain;           /* The database being vacuumed */
   Btree *pTemp;           /* The temporary database we vacuum into */
-  char *zSql = 0;         /* SQL statements */
   int saved_flags;        /* Saved value of the db->flags */
   int saved_nChange;      /* Saved value of db->nChange */
   int saved_nTotalChange; /* Saved value of db->nTotalChange */
@@ -121461,6 +122286,7 @@
   int isMemDb;            /* True if vacuuming a :memory: database */
   int nRes;               /* Bytes of reserved space at the end of each page */
   int nDb;                /* Number of attached databases */
+  const char *zDbMain;    /* Schema name of database to vacuum */
 
   if( !db->autoCommit ){
     sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction");
@@ -121478,11 +122304,13 @@
   saved_nChange = db->nChange;
   saved_nTotalChange = db->nTotalChange;
   saved_mTrace = db->mTrace;
-  db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks | SQLITE_PreferBuiltin;
-  db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder);
+  db->flags |= (SQLITE_WriteSchema | SQLITE_IgnoreChecks
+                 | SQLITE_PreferBuiltin | SQLITE_Vacuum);
+  db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder | SQLITE_CountRows);
   db->mTrace = 0;
 
-  pMain = db->aDb[0].pBt;
+  zDbMain = db->aDb[iDb].zDbSName;
+  pMain = db->aDb[iDb].pBt;
   isMemDb = sqlite3PagerIsMemdb(sqlite3BtreePager(pMain));
 
   /* Attach the temporary database as 'vacuum_db'. The synchronous pragma
@@ -121500,18 +122328,12 @@
   ** to write the journal header file.
   */
   nDb = db->nDb;
-  if( sqlite3TempInMemory(db) ){
-    zSql = "ATTACH ':memory:' AS vacuum_db;";
-  }else{
-    zSql = "ATTACH '' AS vacuum_db;";
-  }
-  rc = execSql(db, pzErrMsg, zSql);
-  if( db->nDb>nDb ){
-    pDb = &db->aDb[db->nDb-1];
-    assert( strcmp(pDb->zName,"vacuum_db")==0 );
-  }
+  rc = execSql(db, pzErrMsg, "ATTACH''AS vacuum_db");
   if( rc!=SQLITE_OK ) goto end_of_vacuum;
-  pTemp = db->aDb[db->nDb-1].pBt;
+  assert( (db->nDb-1)==nDb );
+  pDb = &db->aDb[nDb];
+  assert( strcmp(pDb->zDbSName,"vacuum_db")==0 );
+  pTemp = pDb->pBt;
 
   /* The call to execSql() to attach the temp database has left the file
   ** locked (as there was more than one active statement when the transaction
@@ -121532,16 +122354,15 @@
   }
 #endif
 
-  sqlite3BtreeSetCacheSize(pTemp, db->aDb[0].pSchema->cache_size);
+  sqlite3BtreeSetCacheSize(pTemp, db->aDb[iDb].pSchema->cache_size);
   sqlite3BtreeSetSpillSize(pTemp, sqlite3BtreeSetSpillSize(pMain,0));
-  rc = execSql(db, pzErrMsg, "PRAGMA vacuum_db.synchronous=OFF");
-  if( rc!=SQLITE_OK ) goto end_of_vacuum;
+  sqlite3BtreeSetPagerFlags(pTemp, PAGER_SYNCHRONOUS_OFF);
 
   /* Begin a transaction and take an exclusive lock on the main database
   ** file. This is done before the sqlite3BtreeGetPageSize(pMain) call below,
   ** to ensure that we do not try to change the page-size on a WAL database.
   */
-  rc = execSql(db, pzErrMsg, "BEGIN;");
+  rc = execSql(db, pzErrMsg, "BEGIN");
   if( rc!=SQLITE_OK ) goto end_of_vacuum;
   rc = sqlite3BtreeBeginTrans(pMain, 2);
   if( rc!=SQLITE_OK ) goto end_of_vacuum;
@@ -121568,64 +122389,48 @@
   /* Query the schema of the main database. Create a mirror schema
   ** in the temporary database.
   */
-  rc = execExecSql(db, pzErrMsg,
-      "SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14) "
-      "  FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'"
-      "   AND coalesce(rootpage,1)>0"
+  db->init.iDb = nDb; /* force new CREATE statements into vacuum_db */
+  rc = execSqlF(db, pzErrMsg,
+      "SELECT sql FROM \"%w\".sqlite_master"
+      " WHERE type='table'AND name<>'sqlite_sequence'"
+      " AND coalesce(rootpage,1)>0",
+      zDbMain
   );
   if( rc!=SQLITE_OK ) goto end_of_vacuum;
-  rc = execExecSql(db, pzErrMsg,
-      "SELECT 'CREATE INDEX vacuum_db.' || substr(sql,14)"
-      "  FROM sqlite_master WHERE sql LIKE 'CREATE INDEX %' ");
+  rc = execSqlF(db, pzErrMsg,
+      "SELECT sql FROM \"%w\".sqlite_master"
+      " WHERE type='index' AND length(sql)>10",
+      zDbMain
+  );
   if( rc!=SQLITE_OK ) goto end_of_vacuum;
-  rc = execExecSql(db, pzErrMsg,
-      "SELECT 'CREATE UNIQUE INDEX vacuum_db.' || substr(sql,21) "
-      "  FROM sqlite_master WHERE sql LIKE 'CREATE UNIQUE INDEX %'");
-  if( rc!=SQLITE_OK ) goto end_of_vacuum;
+  db->init.iDb = 0;
 
   /* Loop through the tables in the main database. For each, do
   ** an "INSERT INTO vacuum_db.xxx SELECT * FROM main.xxx;" to copy
   ** the contents to the temporary database.
   */
-  assert( (db->flags & SQLITE_Vacuum)==0 );
-  db->flags |= SQLITE_Vacuum;
-  rc = execExecSql(db, pzErrMsg,
-      "SELECT 'INSERT INTO vacuum_db.' || quote(name) "
-      "|| ' SELECT * FROM main.' || quote(name) || ';'"
-      "FROM main.sqlite_master "
-      "WHERE type = 'table' AND name!='sqlite_sequence' "
-      "  AND coalesce(rootpage,1)>0"
+  rc = execSqlF(db, pzErrMsg,
+      "SELECT'INSERT INTO vacuum_db.'||quote(name)"
+      "||' SELECT*FROM\"%w\".'||quote(name)"
+      "FROM vacuum_db.sqlite_master "
+      "WHERE type='table'AND coalesce(rootpage,1)>0",
+      zDbMain
   );
   assert( (db->flags & SQLITE_Vacuum)!=0 );
   db->flags &= ~SQLITE_Vacuum;
   if( rc!=SQLITE_OK ) goto end_of_vacuum;
 
-  /* Copy over the sequence table
-  */
-  rc = execExecSql(db, pzErrMsg,
-      "SELECT 'DELETE FROM vacuum_db.' || quote(name) || ';' "
-      "FROM vacuum_db.sqlite_master WHERE name='sqlite_sequence' "
-  );
-  if( rc!=SQLITE_OK ) goto end_of_vacuum;
-  rc = execExecSql(db, pzErrMsg,
-      "SELECT 'INSERT INTO vacuum_db.' || quote(name) "
-      "|| ' SELECT * FROM main.' || quote(name) || ';' "
-      "FROM vacuum_db.sqlite_master WHERE name=='sqlite_sequence';"
-  );
-  if( rc!=SQLITE_OK ) goto end_of_vacuum;
-
-
   /* Copy the triggers, views, and virtual tables from the main database
   ** over to the temporary database.  None of these objects has any
   ** associated storage, so all we have to do is copy their entries
   ** from the SQLITE_MASTER table.
   */
-  rc = execSql(db, pzErrMsg,
-      "INSERT INTO vacuum_db.sqlite_master "
-      "  SELECT type, name, tbl_name, rootpage, sql"
-      "    FROM main.sqlite_master"
-      "   WHERE type='view' OR type='trigger'"
-      "      OR (type='table' AND rootpage=0)"
+  rc = execSqlF(db, pzErrMsg,
+      "INSERT INTO vacuum_db.sqlite_master"
+      " SELECT*FROM \"%w\".sqlite_master"
+      " WHERE type IN('view','trigger')"
+      " OR(type='table'AND rootpage=0)",
+      zDbMain
   );
   if( rc ) goto end_of_vacuum;
 
@@ -121679,6 +122484,7 @@
 
 end_of_vacuum:
   /* Restore the original value of db->flags */
+  db->init.iDb = 0;
   db->flags = saved_flags;
   db->nChange = saved_nChange;
   db->nTotalChange = saved_nTotalChange;
@@ -121791,7 +122597,7 @@
 /*
 ** External API function used to create a new virtual-table module.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
   sqlite3 *db,                    /* Database in which module is registered */
   const char *zName,              /* Name assigned to this module */
   const sqlite3_module *pModule,  /* The definition of the module */
@@ -121806,7 +122612,7 @@
 /*
 ** External API function used to create a new virtual-table module.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
   sqlite3 *db,                    /* Database in which module is registered */
   const char *zName,              /* Name assigned to this module */
   const sqlite3_module *pModule,  /* The definition of the module */
@@ -122057,7 +122863,7 @@
   */
   if( pTable->azModuleArg ){
     sqlite3AuthCheck(pParse, SQLITE_CREATE_VTABLE, pTable->zName, 
-            pTable->azModuleArg[0], pParse->db->aDb[iDb].zName);
+            pTable->azModuleArg[0], pParse->db->aDb[iDb].zDbSName);
   }
 #endif
 }
@@ -122121,7 +122927,7 @@
       "UPDATE %Q.%s "
          "SET type='table', name=%Q, tbl_name=%Q, rootpage=0, sql=%Q "
        "WHERE rowid=#%d",
-      db->aDb[iDb].zName, SCHEMA_TABLE(iDb),
+      db->aDb[iDb].zDbSName, SCHEMA_TABLE(iDb),
       pTab->zName,
       pTab->zName,
       zStmt,
@@ -122231,7 +123037,7 @@
   pVTable->pMod = pMod;
 
   iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
-  pTab->azModuleArg[1] = db->aDb[iDb].zName;
+  pTab->azModuleArg[1] = db->aDb[iDb].zDbSName;
 
   /* Invoke the virtual table constructor */
   assert( &db->pVtabCtx );
@@ -122385,7 +123191,7 @@
 ** This function is invoked by the vdbe to call the xCreate method
 ** of the virtual table named zTab in database iDb. 
 **
-** If an error occurs, *pzErr is set to point an an English language
+** If an error occurs, *pzErr is set to point to an English language
 ** description of the error and an SQLITE_XXX error code is returned.
 ** In this case the caller must call sqlite3DbFree(db, ) on *pzErr.
 */
@@ -122395,7 +123201,7 @@
   Module *pMod;
   const char *zMod;
 
-  pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName);
+  pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zDbSName);
   assert( pTab && (pTab->tabFlags & TF_Virtual)!=0 && !pTab->pVTable );
 
   /* Locate the required virtual table module */
@@ -122430,7 +123236,7 @@
 ** valid to call this function from within the xCreate() or xConnect() of a
 ** virtual table module.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){
+SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){
   VtabCtx *pCtx;
   Parse *pParse;
   int rc = SQLITE_OK;
@@ -122519,7 +123325,7 @@
   int rc = SQLITE_OK;
   Table *pTab;
 
-  pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName);
+  pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zDbSName);
   if( pTab!=0 && ALWAYS(pTab->pVTable!=0) ){
     VTable *p;
     int (*xDestroy)(sqlite3_vtab *);
@@ -122887,7 +123693,7 @@
 ** The results of this routine are undefined unless it is called from
 ** within an xUpdate method.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *db){
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *db){
   static const unsigned char aMap[] = { 
     SQLITE_ROLLBACK, SQLITE_ABORT, SQLITE_FAIL, SQLITE_IGNORE, SQLITE_REPLACE 
   };
@@ -122905,7 +123711,7 @@
 ** the SQLite core with additional information about the behavior
 ** of the virtual table being implemented.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3 *db, int op, ...){
+SQLITE_API int sqlite3_vtab_config(sqlite3 *db, int op, ...){
   va_list ap;
   int rc = SQLITE_OK;
 
@@ -123086,6 +123892,8 @@
   union {
     struct {               /* Information for internal btree tables */
       u16 nEq;               /* Number of equality constraints */
+      u16 nBtm;              /* Size of BTM vector */
+      u16 nTop;              /* Size of TOP vector */
       Index *pIndex;         /* Index used, or NULL */
     } btree;
     struct {               /* Information for virtual tables */
@@ -123208,19 +124016,20 @@
 */
 struct WhereTerm {
   Expr *pExpr;            /* Pointer to the subexpression that is this term */
+  WhereClause *pWC;       /* The clause this term is part of */
+  LogEst truthProb;       /* Probability of truth for this expression */
+  u16 wtFlags;            /* TERM_xxx bit flags.  See below */
+  u16 eOperator;          /* A WO_xx value describing <op> */
+  u8 nChild;              /* Number of children that must disable us */
+  u8 eMatchOp;            /* Op for vtab MATCH/LIKE/GLOB/REGEXP terms */
   int iParent;            /* Disable pWC->a[iParent] when this term disabled */
   int leftCursor;         /* Cursor number of X in "X <op> <expr>" */
+  int iField;             /* Field in (?,?,?) IN (SELECT...) vector */
   union {
     int leftColumn;         /* Column number of X in "X <op> <expr>" */
     WhereOrInfo *pOrInfo;   /* Extra information if (eOperator & WO_OR)!=0 */
     WhereAndInfo *pAndInfo; /* Extra information if (eOperator& WO_AND)!=0 */
   } u;
-  LogEst truthProb;       /* Probability of truth for this expression */
-  u16 eOperator;          /* A WO_xx value describing <op> */
-  u16 wtFlags;            /* TERM_xxx bit flags.  See below */
-  u8 nChild;              /* Number of children that must disable us */
-  u8 eMatchOp;            /* Op for vtab MATCH/LIKE/GLOB/REGEXP terms */
-  WhereClause *pWC;       /* The clause this term is part of */
   Bitmask prereqRight;    /* Bitmask of tables used by pExpr->pRight */
   Bitmask prereqAll;      /* Bitmask of tables referenced by pExpr */
 };
@@ -123373,25 +124182,25 @@
   SrcList *pTabList;        /* List of tables in the join */
   ExprList *pOrderBy;       /* The ORDER BY clause or NULL */
   ExprList *pDistinctSet;   /* DISTINCT over all these values */
-  WhereLoop *pLoops;        /* List of all WhereLoop objects */
-  Bitmask revMask;          /* Mask of ORDER BY terms that need reversing */
-  LogEst nRowOut;           /* Estimated number of output rows */
   LogEst iLimit;            /* LIMIT if wctrlFlags has WHERE_USE_LIMIT */
+  int aiCurOnePass[2];      /* OP_OpenWrite cursors for the ONEPASS opt */
+  int iContinue;            /* Jump here to continue with next record */
+  int iBreak;               /* Jump here to break out of the loop */
+  int savedNQueryLoop;      /* pParse->nQueryLoop outside the WHERE loop */
   u16 wctrlFlags;           /* Flags originally passed to sqlite3WhereBegin() */
+  u8 nLevel;                /* Number of nested loop */
   i8 nOBSat;                /* Number of ORDER BY terms satisfied by indices */
   u8 sorted;                /* True if really sorted (not just grouped) */
   u8 eOnePass;              /* ONEPASS_OFF, or _SINGLE, or _MULTI */
   u8 untestedTerms;         /* Not all WHERE terms resolved by outer loop */
   u8 eDistinct;             /* One of the WHERE_DISTINCT_* values */
-  u8 nLevel;                /* Number of nested loop */
   u8 bOrderedInnerLoop;     /* True if only the inner-most loop is ordered */
   int iTop;                 /* The very beginning of the WHERE loop */
-  int iContinue;            /* Jump here to continue with next record */
-  int iBreak;               /* Jump here to break out of the loop */
-  int savedNQueryLoop;      /* pParse->nQueryLoop outside the WHERE loop */
-  int aiCurOnePass[2];      /* OP_OpenWrite cursors for the ONEPASS opt */
-  WhereMaskSet sMaskSet;    /* Map cursor numbers to bitmasks */
+  WhereLoop *pLoops;        /* List of all WhereLoop objects */
+  Bitmask revMask;          /* Mask of ORDER BY terms that need reversing */
+  LogEst nRowOut;           /* Estimated number of output rows */
   WhereClause sWC;          /* Decomposition of the WHERE clause */
+  WhereMaskSet sMaskSet;    /* Map cursor numbers to bitmasks */
   WhereLevel a[1];          /* Information about each nest loop in WHERE */
 };
 
@@ -123515,7 +124324,18 @@
 /************** Continuing where we left off in wherecode.c ******************/
 
 #ifndef SQLITE_OMIT_EXPLAIN
+
 /*
+** Return the name of the i-th column of the pIdx index.
+*/
+static const char *explainIndexColumnName(Index *pIdx, int i){
+  i = pIdx->aiColumn[i];
+  if( i==XN_EXPR ) return "<expr>";
+  if( i==XN_ROWID ) return "rowid";
+  return pIdx->pTable->aCol[i].zName;
+}
+
+/*
 ** This routine is a helper for explainIndexRange() below
 **
 ** pStr holds the text of an expression that we are building up one term
@@ -123525,24 +124345,32 @@
 */
 static void explainAppendTerm(
   StrAccum *pStr,             /* The text expression being built */
-  int iTerm,                  /* Index of this term.  First is zero */
-  const char *zColumn,        /* Name of the column */
+  Index *pIdx,                /* Index to read column names from */
+  int nTerm,                  /* Number of terms */
+  int iTerm,                  /* Zero-based index of first term. */
+  int bAnd,                   /* Non-zero to append " AND " */
   const char *zOp             /* Name of the operator */
 ){
-  if( iTerm ) sqlite3StrAccumAppend(pStr, " AND ", 5);
-  sqlite3StrAccumAppendAll(pStr, zColumn);
+  int i;
+
+  assert( nTerm>=1 );
+  if( bAnd ) sqlite3StrAccumAppend(pStr, " AND ", 5);
+
+  if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1);
+  for(i=0; i<nTerm; i++){
+    if( i ) sqlite3StrAccumAppend(pStr, ",", 1);
+    sqlite3StrAccumAppendAll(pStr, explainIndexColumnName(pIdx, iTerm+i));
+  }
+  if( nTerm>1 ) sqlite3StrAccumAppend(pStr, ")", 1);
+
   sqlite3StrAccumAppend(pStr, zOp, 1);
-  sqlite3StrAccumAppend(pStr, "?", 1);
-}
 
-/*
-** Return the name of the i-th column of the pIdx index.
-*/
-static const char *explainIndexColumnName(Index *pIdx, int i){
-  i = pIdx->aiColumn[i];
-  if( i==XN_EXPR ) return "<expr>";
-  if( i==XN_ROWID ) return "rowid";
-  return pIdx->pTable->aCol[i].zName;
+  if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1);
+  for(i=0; i<nTerm; i++){
+    if( i ) sqlite3StrAccumAppend(pStr, ",", 1);
+    sqlite3StrAccumAppend(pStr, "?", 1);
+  }
+  if( nTerm>1 ) sqlite3StrAccumAppend(pStr, ")", 1);
 }
 
 /*
@@ -123575,12 +124403,11 @@
 
   j = i;
   if( pLoop->wsFlags&WHERE_BTM_LIMIT ){
-    const char *z = explainIndexColumnName(pIndex, i);
-    explainAppendTerm(pStr, i++, z, ">");
+    explainAppendTerm(pStr, pIndex, pLoop->u.btree.nBtm, j, i, ">");
+    i = 1;
   }
   if( pLoop->wsFlags&WHERE_TOP_LIMIT ){
-    const char *z = explainIndexColumnName(pIndex, j);
-    explainAppendTerm(pStr, i, z, "<");
+    explainAppendTerm(pStr, pIndex, pLoop->u.btree.nTop, j, i, "<");
   }
   sqlite3StrAccumAppend(pStr, ")", 1);
 }
@@ -123770,7 +124597,7 @@
 */
 static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){
   int nLoop = 0;
-  while( pTerm
+  while( ALWAYS(pTerm!=0)
       && (pTerm->wtFlags & TERM_CODED)==0
       && (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin))
       && (pLevel->notReady & pTerm->prereqAll)==0
@@ -123826,16 +124653,45 @@
   }
 }
 
+/*
+** Expression pRight, which is the RHS of a comparison operation, is 
+** either a vector of n elements or, if n==1, a scalar expression.
+** Before the comparison operation, affinity zAff is to be applied
+** to the pRight values. This function modifies characters within the
+** affinity string to SQLITE_AFF_BLOB if either:
+**
+**   * the comparison will be performed with no affinity, or
+**   * the affinity change in zAff is guaranteed not to change the value.
+*/
+static void updateRangeAffinityStr(
+  Expr *pRight,                   /* RHS of comparison */
+  int n,                          /* Number of vector elements in comparison */
+  char *zAff                      /* Affinity string to modify */
+){
+  int i;
+  for(i=0; i<n; i++){
+    Expr *p = sqlite3VectorFieldSubexpr(pRight, i);
+    if( sqlite3CompareAffinity(p, zAff[i])==SQLITE_AFF_BLOB
+     || sqlite3ExprNeedsNoAffinityChange(p, zAff[i])
+    ){
+      zAff[i] = SQLITE_AFF_BLOB;
+    }
+  }
+}
 
 /*
 ** Generate code for a single equality term of the WHERE clause.  An equality
 ** term can be either X=expr or X IN (...).   pTerm is the term to be 
 ** coded.
 **
-** The current value for the constraint is left in register iReg.
+** The current value for the constraint is left in a register, the index
+** of which is returned.  An attempt is made store the result in iTarget but
+** this is only guaranteed for TK_ISNULL and TK_IN constraints.  If the
+** constraint is a TK_EQ or TK_IS, then the current value might be left in
+** some other register and it is the caller's responsibility to compensate.
 **
-** For a constraint of the form X=expr, the expression is evaluated and its
-** result is left on the stack.  For constraints of the form X IN (...)
+** For a constraint of the form X=expr, the expression is evaluated in
+** straight-line code.  For constraints of the form X IN (...)
 ** this routine sets up a loop that will iterate over all values of X.
 */
 static int codeEqualityTerm(
@@ -123850,6 +124706,7 @@
   Vdbe *v = pParse->pVdbe;
   int iReg;                  /* Register holding results */
 
+  assert( pLevel->pWLoop->aLTerm[iEq]==pTerm );
   assert( iTarget>0 );
   if( pX->op==TK_EQ || pX->op==TK_IS ){
     iReg = sqlite3ExprCodeTarget(pParse, pX->pRight, iTarget);
@@ -123858,10 +124715,13 @@
     sqlite3VdbeAddOp2(v, OP_Null, 0, iReg);
 #ifndef SQLITE_OMIT_SUBQUERY
   }else{
-    int eType;
+    int eType = IN_INDEX_NOOP;
     int iTab;
     struct InLoop *pIn;
     WhereLoop *pLoop = pLevel->pWLoop;
+    int i;
+    int nEq = 0;
+    int *aiMap = 0;
 
     if( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0
       && pLoop->u.btree.pIndex!=0
@@ -123873,7 +124733,75 @@
     }
     assert( pX->op==TK_IN );
     iReg = iTarget;
-    eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0);
+
+    for(i=0; i<iEq; i++){
+      if( pLoop->aLTerm[i] && pLoop->aLTerm[i]->pExpr==pX ){
+        disableTerm(pLevel, pTerm);
+        return iTarget;
+      }
+    }
+    for(i=iEq;i<pLoop->nLTerm; i++){
+      if( ALWAYS(pLoop->aLTerm[i]) && pLoop->aLTerm[i]->pExpr==pX ) nEq++;
+    }
+
+    if( (pX->flags & EP_xIsSelect)==0 || pX->x.pSelect->pEList->nExpr==1 ){
+      eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, 0);
+    }else{
+      Select *pSelect = pX->x.pSelect;
+      sqlite3 *db = pParse->db;
+      ExprList *pOrigRhs = pSelect->pEList;
+      ExprList *pOrigLhs = pX->pLeft->x.pList;
+      ExprList *pRhs = 0;         /* New Select.pEList for RHS */
+      ExprList *pLhs = 0;         /* New pX->pLeft vector */
+
+      for(i=iEq;i<pLoop->nLTerm; i++){
+        if( pLoop->aLTerm[i]->pExpr==pX ){
+          int iField = pLoop->aLTerm[i]->iField - 1;
+          Expr *pNewRhs = sqlite3ExprDup(db, pOrigRhs->a[iField].pExpr, 0);
+          Expr *pNewLhs = sqlite3ExprDup(db, pOrigLhs->a[iField].pExpr, 0);
+
+          pRhs = sqlite3ExprListAppend(pParse, pRhs, pNewRhs);
+          pLhs = sqlite3ExprListAppend(pParse, pLhs, pNewLhs);
+        }
+      }
+      if( !db->mallocFailed ){
+        Expr *pLeft = pX->pLeft;
+
+        if( pSelect->pOrderBy ){
+          /* If the SELECT statement has an ORDER BY clause, zero the 
+          ** iOrderByCol variables. These are set to non-zero when an 
+          ** ORDER BY term exactly matches one of the terms of the 
+          ** result-set. Since the result-set of the SELECT statement may
+          ** have been modified or reordered, these variables are no longer 
+          ** set correctly.  Since setting them is just an optimization, 
+          ** it's easiest just to zero them here.  */
+          ExprList *pOrderBy = pSelect->pOrderBy;
+          for(i=0; i<pOrderBy->nExpr; i++){
+            pOrderBy->a[i].u.x.iOrderByCol = 0;
+          }
+        }
+
+        /* Take care here not to generate a TK_VECTOR containing only a
+        ** single value. Since the parser never creates such a vector, some
+        ** of the subroutines do not handle this case.  */
+        if( pLhs->nExpr==1 ){
+          pX->pLeft = pLhs->a[0].pExpr;
+        }else{
+          pLeft->x.pList = pLhs;
+          aiMap = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int) * nEq);
+          testcase( aiMap==0 );
+        }
+        pSelect->pEList = pRhs;
+        eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, aiMap);
+        testcase( aiMap!=0 && aiMap[0]!=0 );
+        pSelect->pEList = pOrigRhs;
+        pLeft->x.pList = pOrigLhs;
+        pX->pLeft = pLeft;
+      }
+      sqlite3ExprListDelete(pParse->db, pLhs);
+      sqlite3ExprListDelete(pParse->db, pRhs);
+    }
+
     if( eType==IN_INDEX_INDEX_DESC ){
       testcase( bRev );
       bRev = !bRev;
@@ -123883,28 +124811,45 @@
     VdbeCoverageIf(v, bRev);
     VdbeCoverageIf(v, !bRev);
     assert( (pLoop->wsFlags & WHERE_MULTI_OR)==0 );
+
     pLoop->wsFlags |= WHERE_IN_ABLE;
     if( pLevel->u.in.nIn==0 ){
       pLevel->addrNxt = sqlite3VdbeMakeLabel(v);
     }
-    pLevel->u.in.nIn++;
+
+    i = pLevel->u.in.nIn;
+    pLevel->u.in.nIn += nEq;
     pLevel->u.in.aInLoop =
        sqlite3DbReallocOrFree(pParse->db, pLevel->u.in.aInLoop,
                               sizeof(pLevel->u.in.aInLoop[0])*pLevel->u.in.nIn);
     pIn = pLevel->u.in.aInLoop;
     if( pIn ){
-      pIn += pLevel->u.in.nIn - 1;
-      pIn->iCur = iTab;
-      if( eType==IN_INDEX_ROWID ){
-        pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iReg);
-      }else{
-        pIn->addrInTop = sqlite3VdbeAddOp3(v, OP_Column, iTab, 0, iReg);
+      int iMap = 0;               /* Index in aiMap[] */
+      pIn += i;
+      for(i=iEq;i<pLoop->nLTerm; i++){
+        if( pLoop->aLTerm[i]->pExpr==pX ){
+          int iOut = iReg + i - iEq;
+          if( eType==IN_INDEX_ROWID ){
+            testcase( nEq>1 );  /* Happens with a UNIQUE index on ROWID */
+            pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iOut);
+          }else{
+            int iCol = aiMap ? aiMap[iMap++] : 0;
+            pIn->addrInTop = sqlite3VdbeAddOp3(v,OP_Column,iTab, iCol, iOut);
+          }
+          sqlite3VdbeAddOp1(v, OP_IsNull, iOut); VdbeCoverage(v);
+          if( i==iEq ){
+            pIn->iCur = iTab;
+            pIn->eEndLoopOp = bRev ? OP_PrevIfOpen : OP_NextIfOpen;
+          }else{
+            pIn->eEndLoopOp = OP_Noop;
+          }
+          pIn++;
+        }
       }
-      pIn->eEndLoopOp = bRev ? OP_PrevIfOpen : OP_NextIfOpen;
-      sqlite3VdbeAddOp1(v, OP_IsNull, iReg); VdbeCoverage(v);
     }else{
       pLevel->u.in.nIn = 0;
     }
+    sqlite3DbFree(pParse->db, aiMap);
 #endif
   }
   disableTerm(pLevel, pTerm);
@@ -124030,9 +124975,15 @@
         sqlite3VdbeAddOp2(v, OP_SCopy, r1, regBase+j);
       }
     }
-    testcase( pTerm->eOperator & WO_ISNULL );
-    testcase( pTerm->eOperator & WO_IN );
-    if( (pTerm->eOperator & (WO_ISNULL|WO_IN))==0 ){
+    if( pTerm->eOperator & WO_IN ){
+      if( pTerm->pExpr->flags & EP_xIsSelect ){
+        /* No affinity ever needs to be (or should be) applied to a value
+        ** from the RHS of an "? IN (SELECT ...)" expression. The 
+        ** sqlite3FindInIndex() routine has already ensured that the 
+        ** affinity of the comparison has been applied to the value.  */
+        if( zAff ) zAff[j] = SQLITE_AFF_BLOB;
+      }
+    }else if( (pTerm->eOperator & WO_ISNULL)==0 ){
       Expr *pRight = pTerm->pExpr->pRight;
       if( (pTerm->wtFlags & TERM_IS)==0 && sqlite3ExprCanBeNull(pRight) ){
         sqlite3VdbeAddOp2(v, OP_IsNull, regBase+j, pLevel->addrBrk);
@@ -124356,6 +125307,39 @@
 }
 
 /*
+** If the expression passed as the second argument is a vector, generate
+** code to write the first nReg elements of the vector into an array
+** of registers starting with iReg.
+**
+** If the expression is not a vector, then nReg must be passed 1. In
+** this case, generate code to evaluate the expression and leave the
+** result in register iReg.
+*/
+static void codeExprOrVector(Parse *pParse, Expr *p, int iReg, int nReg){
+  assert( nReg>0 );
+  if( sqlite3ExprIsVector(p) ){
+#ifndef SQLITE_OMIT_SUBQUERY
+    if( (p->flags & EP_xIsSelect) ){
+      Vdbe *v = pParse->pVdbe;
+      int iSelect = sqlite3CodeSubselect(pParse, p, 0, 0);
+      sqlite3VdbeAddOp3(v, OP_Copy, iSelect, iReg, nReg-1);
+    }else
+#endif
+    {
+      int i;
+      ExprList *pList = p->x.pList;
+      assert( nReg<=pList->nExpr );
+      for(i=0; i<nReg; i++){
+        sqlite3ExprCode(pParse, pList->a[i].pExpr, iReg+i);
+      }
+    }
+  }else{
+    assert( nReg==1 );
+    sqlite3ExprCode(pParse, p, iReg);
+  }
+}
+
+/*
 ** Generate code for the start of the iLevel-th loop in the WHERE clause
 ** implementation described by pWInfo.
 */
@@ -124450,7 +125434,8 @@
         codeEqualityTerm(pParse, pTerm, pLevel, j, bRev, iTarget);
         addrNotFound = pLevel->addrNxt;
       }else{
-        sqlite3ExprCode(pParse, pTerm->pExpr->pRight, iTarget);
+        Expr *pRight = pTerm->pExpr->pRight;
+        codeExprOrVector(pParse, pRight, iTarget, 1);
       }
     }
     sqlite3VdbeAddOp2(v, OP_Integer, pLoop->u.vtab.idxNum, iReg);
@@ -124564,6 +125549,7 @@
     if( pStart ){
       Expr *pX;             /* The expression that defines the start bound */
       int r1, rTemp;        /* Registers for holding the start boundary */
+      int op;               /* Cursor seek operation */
 
       /* The following constant maps TK_xx codes into corresponding 
       ** seek opcodes.  It depends on a particular ordering of TK_xx
@@ -124583,16 +125569,23 @@
       pX = pStart->pExpr;
       assert( pX!=0 );
       testcase( pStart->leftCursor!=iCur ); /* transitive constraints */
-      r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp);
-      sqlite3VdbeAddOp3(v, aMoveOp[pX->op-TK_GT], iCur, addrBrk, r1);
+      if( sqlite3ExprIsVector(pX->pRight) ){
+        r1 = rTemp = sqlite3GetTempReg(pParse);
+        codeExprOrVector(pParse, pX->pRight, r1, 1);
+        op = aMoveOp[(pX->op - TK_GT) | 0x0001];
+      }else{
+        r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp);
+        disableTerm(pLevel, pStart);
+        op = aMoveOp[(pX->op - TK_GT)];
+      }
+      sqlite3VdbeAddOp3(v, op, iCur, addrBrk, r1);
       VdbeComment((v, "pk"));
       VdbeCoverageIf(v, pX->op==TK_GT);
       VdbeCoverageIf(v, pX->op==TK_LE);
       VdbeCoverageIf(v, pX->op==TK_LT);
       VdbeCoverageIf(v, pX->op==TK_GE);
       sqlite3ExprCacheAffinityChange(pParse, r1, 1);
       sqlite3ReleaseTempReg(pParse, rTemp);
-      disableTerm(pLevel, pStart);
     }else{
       sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrBrk);
       VdbeCoverageIf(v, bRev==0);
@@ -124606,13 +125599,17 @@
       testcase( pEnd->leftCursor!=iCur ); /* Transitive constraints */
       testcase( pEnd->wtFlags & TERM_VIRTUAL );
       memEndValue = ++pParse->nMem;
-      sqlite3ExprCode(pParse, pX->pRight, memEndValue);
-      if( pX->op==TK_LT || pX->op==TK_GT ){
+      codeExprOrVector(pParse, pX->pRight, memEndValue, 1);
+      if( 0==sqlite3ExprIsVector(pX->pRight) 
+       && (pX->op==TK_LT || pX->op==TK_GT) 
+      ){
         testOp = bRev ? OP_Le : OP_Ge;
       }else{
         testOp = bRev ? OP_Lt : OP_Gt;
       }
-      disableTerm(pLevel, pEnd);
+      if( 0==sqlite3ExprIsVector(pX->pRight) ){
+        disableTerm(pLevel, pEnd);
+      }
     }
     start = sqlite3VdbeCurrentAddr(v);
     pLevel->op = bRev ? OP_Prev : OP_Next;
@@ -124679,6 +125676,8 @@
       OP_IdxLT,            /* 3: (end_constraints &&  bRev &&  endEq) */
     };
     u16 nEq = pLoop->u.btree.nEq;     /* Number of == or IN terms */
+    u16 nBtm = pLoop->u.btree.nBtm;   /* Length of BTM vector */
+    u16 nTop = pLoop->u.btree.nTop;   /* Length of TOP vector */
     int regBase;                 /* Base register holding constraint values */
     WhereTerm *pRangeStart = 0;  /* Inequality constraint at range start */
     WhereTerm *pRangeEnd = 0;    /* Inequality constraint at range end */
@@ -124691,7 +125690,7 @@
     int nExtraReg = 0;           /* Number of extra registers needed */
     int op;                      /* Instruction opcode */
     char *zStartAff;             /* Affinity for start of range constraint */
-    char cEndAff = 0;            /* Affinity for end of range constraint */
+    char *zEndAff = 0;           /* Affinity for end of range constraint */
     u8 bSeekPastNull = 0;        /* True to seek past initial nulls */
     u8 bStopAtNull = 0;          /* Add condition to terminate at NULLs */
 
@@ -124725,14 +125724,14 @@
     j = nEq;
     if( pLoop->wsFlags & WHERE_BTM_LIMIT ){
       pRangeStart = pLoop->aLTerm[j++];
-      nExtraReg = 1;
+      nExtraReg = MAX(nExtraReg, pLoop->u.btree.nBtm);
       /* Like optimization range constraints always occur in pairs */
       assert( (pRangeStart->wtFlags & TERM_LIKEOPT)==0 || 
               (pLoop->wsFlags & WHERE_TOP_LIMIT)!=0 );
     }
     if( pLoop->wsFlags & WHERE_TOP_LIMIT ){
       pRangeEnd = pLoop->aLTerm[j++];
-      nExtraReg = 1;
+      nExtraReg = MAX(nExtraReg, pLoop->u.btree.nTop);
 #ifndef SQLITE_LIKE_DOESNT_MATCH_BLOBS
       if( (pRangeEnd->wtFlags & TERM_LIKEOPT)!=0 ){
         assert( pRangeStart!=0 );                     /* LIKE opt constraints */
@@ -124750,11 +125749,11 @@
         pLevel->iLikeRepCntr |= bRev ^ (pIdx->aSortOrder[nEq]==SQLITE_SO_DESC);
       }
 #endif
-      if( pRangeStart==0
-       && (j = pIdx->aiColumn[nEq])>=0 
-       && pIdx->pTable->aCol[j].notNull==0
-      ){
-        bSeekPastNull = 1;
+      if( pRangeStart==0 ){
+        j = pIdx->aiColumn[nEq];
+        if( (j>=0 && pIdx->pTable->aCol[j].notNull==0) || j==XN_EXPR ){
+          bSeekPastNull = 1;
+        }
       }
     }
     assert( pRangeEnd==0 || (pRangeEnd->wtFlags & TERM_VNULL)==0 );
@@ -124768,6 +125767,7 @@
     ){
       SWAP(WhereTerm *, pRangeEnd, pRangeStart);
       SWAP(u8, bSeekPastNull, bStopAtNull);
+      SWAP(u8, nBtm, nTop);
     }
 
     /* Generate code to evaluate all constraint terms using == or IN
@@ -124777,7 +125777,9 @@
     codeCursorHint(pTabItem, pWInfo, pLevel, pRangeEnd);
     regBase = codeAllEqualityTerms(pParse,pLevel,bRev,nExtraReg,&zStartAff);
     assert( zStartAff==0 || sqlite3Strlen30(zStartAff)>=nEq );
-    if( zStartAff ) cEndAff = zStartAff[nEq];
+    if( zStartAff && nTop ){
+      zEndAff = sqlite3DbStrDup(db, &zStartAff[nEq]);
+    }
     addrNxt = pLevel->addrNxt;
 
     testcase( pRangeStart && (pRangeStart->eOperator & WO_LE)!=0 );
@@ -124792,7 +125794,7 @@
     nConstraint = nEq;
     if( pRangeStart ){
       Expr *pRight = pRangeStart->pExpr->pRight;
-      sqlite3ExprCode(pParse, pRight, regBase+nEq);
+      codeExprOrVector(pParse, pRight, regBase+nEq, nBtm);
       whereLikeOptimizationStringFixup(v, pLevel, pRangeStart);
       if( (pRangeStart->wtFlags & TERM_VNULL)==0
        && sqlite3ExprCanBeNull(pRight)
@@ -124801,18 +125803,15 @@
         VdbeCoverage(v);
       }
       if( zStartAff ){
-        if( sqlite3CompareAffinity(pRight, zStartAff[nEq])==SQLITE_AFF_BLOB){
-          /* Since the comparison is to be performed with no conversions
-          ** applied to the operands, set the affinity to apply to pRight to 
-          ** SQLITE_AFF_BLOB.  */
-          zStartAff[nEq] = SQLITE_AFF_BLOB;
-        }
-        if( sqlite3ExprNeedsNoAffinityChange(pRight, zStartAff[nEq]) ){
-          zStartAff[nEq] = SQLITE_AFF_BLOB;
-        }
+        updateRangeAffinityStr(pRight, nBtm, &zStartAff[nEq]);
       }  
-      nConstraint++;
+      nConstraint += nBtm;
       testcase( pRangeStart->wtFlags & TERM_VIRTUAL );
+      if( sqlite3ExprIsVector(pRight)==0 ){
+        disableTerm(pLevel, pRangeStart);
+      }else{
+        startEq = 1;
+      }
       bSeekPastNull = 0;
     }else if( bSeekPastNull ){
       sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq);
@@ -124845,27 +125844,35 @@
     if( pRangeEnd ){
       Expr *pRight = pRangeEnd->pExpr->pRight;
       sqlite3ExprCacheRemove(pParse, regBase+nEq, 1);
-      sqlite3ExprCode(pParse, pRight, regBase+nEq);
+      codeExprOrVector(pParse, pRight, regBase+nEq, nTop);
       whereLikeOptimizationStringFixup(v, pLevel, pRangeEnd);
       if( (pRangeEnd->wtFlags & TERM_VNULL)==0
        && sqlite3ExprCanBeNull(pRight)
       ){
         sqlite3VdbeAddOp2(v, OP_IsNull, regBase+nEq, addrNxt);
         VdbeCoverage(v);
       }
-      if( sqlite3CompareAffinity(pRight, cEndAff)!=SQLITE_AFF_BLOB
-       && !sqlite3ExprNeedsNoAffinityChange(pRight, cEndAff)
-      ){
-        codeApplyAffinity(pParse, regBase+nEq, 1, &cEndAff);
+      if( zEndAff ){
+        updateRangeAffinityStr(pRight, nTop, zEndAff);
+        codeApplyAffinity(pParse, regBase+nEq, nTop, zEndAff);
+      }else{
+        assert( pParse->db->mallocFailed );
       }
-      nConstraint++;
+      nConstraint += nTop;
       testcase( pRangeEnd->wtFlags & TERM_VIRTUAL );
+
+      if( sqlite3ExprIsVector(pRight)==0 ){
+        disableTerm(pLevel, pRangeEnd);
+      }else{
+        endEq = 1;
+      }
     }else if( bStopAtNull ){
       sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq);
       endEq = 0;
       nConstraint++;
     }
     sqlite3DbFree(db, zStartAff);
+    sqlite3DbFree(db, zEndAff);
 
     /* Top of the loop body */
     pLevel->p2 = sqlite3VdbeCurrentAddr(v);
@@ -124881,8 +125888,6 @@
     }
 
     /* Seek the table cursor, if required */
-    disableTerm(pLevel, pRangeStart);
-    disableTerm(pLevel, pRangeEnd);
     if( omitTable ){
       /* pIdx is a covering index.  No need to access the main table. */
     }else if( HasRowid(pIdx->pTable) ){
@@ -124906,9 +125911,7 @@
                            iRowidReg, pPk->nKeyCol); VdbeCoverage(v);
     }
 
-    /* Record the instruction used to terminate the loop. Disable 
-    ** WHERE clause terms made redundant by the index range scan.
-    */
+    /* Record the instruction used to terminate the loop. */
     if( pLoop->wsFlags & WHERE_ONEROW ){
       pLevel->op = OP_Noop;
     }else if( bRev ){
@@ -124985,7 +125988,7 @@
     u16 wctrlFlags;                    /* Flags for sub-WHERE clause */
     Expr *pAndExpr = 0;                /* An ".. AND (...)" expression */
     Table *pTab = pTabItem->pTab;
-   
+
     pTerm = pLoop->aLTerm[0];
     assert( pTerm!=0 );
     assert( pTerm->eOperator & WO_OR );
@@ -125286,7 +126289,7 @@
   ** the implied "t1.a=123" constraint.
   */
   for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
-    Expr *pE, *pEAlt;
+    Expr *pE, sEAlt;
     WhereTerm *pAlt;
     if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
     if( (pTerm->eOperator & (WO_EQ|WO_IS))==0 ) continue;
@@ -125304,13 +126307,9 @@
     testcase( pAlt->eOperator & WO_IS );
     testcase( pAlt->eOperator & WO_IN );
     VdbeModuleComment((v, "begin transitive constraint"));
-    pEAlt = sqlite3StackAllocRaw(db, sizeof(*pEAlt));
-    if( pEAlt ){
-      *pEAlt = *pAlt->pExpr;
-      pEAlt->pLeft = pE->pLeft;
-      sqlite3ExprIfFalse(pParse, pEAlt, addrCont, SQLITE_JUMPIFNULL);
-      sqlite3StackFree(db, pEAlt);
-    }
+    sEAlt = *pAlt->pExpr;
+    sEAlt.pLeft = pE->pLeft;
+    sqlite3ExprIfFalse(pParse, &sEAlt, addrCont, SQLITE_JUMPIFNULL);
   }
 
   /* For a LEFT OUTER JOIN, generate code that will record the fact that
@@ -125419,7 +126418,6 @@
       sqlite3DbFree(db, pOld);
     }
     pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]);
-    memset(&pWC->a[pWC->nTerm], 0, sizeof(pWC->a[0])*(pWC->nSlot-pWC->nTerm));
   }
   pTerm = &pWC->a[idx = pWC->nTerm++];
   if( p && ExprHasProperty(p, EP_Unlikely) ){
@@ -125431,13 +126429,15 @@
   pTerm->wtFlags = wtFlags;
   pTerm->pWC = pWC;
   pTerm->iParent = -1;
+  memset(&pTerm->eOperator, 0,
+         sizeof(WhereTerm) - offsetof(WhereTerm,eOperator));
   return idx;
 }
 
 /*
 ** Return TRUE if the given operator is one of the operators that is
 ** allowed for an indexable WHERE clause term.  The allowed operators are
-** "=", "<", ">", "<=", ">=", "IN", and "IS NULL"
+** "=", "<", ">", "<=", ">=", "IN", "IS", and "IS NULL"
 */
 static int allowedOp(int op){
   assert( TK_GT>TK_EQ && TK_GT<TK_GE );
@@ -125632,7 +126632,7 @@
   Expr *pExpr,                    /* Test this expression */
   unsigned char *peOp2            /* OUT: 0 for MATCH, or else an op2 value */
 ){
-  struct Op2 {
+  static const struct Op2 {
     const char *zOp;
     unsigned char eOp2;
   } aOp[] = {
@@ -126165,14 +127165,16 @@
 ** in any index.  Return TRUE (1) if pExpr is an indexed term and return
 ** FALSE (0) if not.  If TRUE is returned, also set *piCur to the cursor
 ** number of the table that is indexed and *piColumn to the column number
-** of the column that is indexed, or -2 if an expression is being indexed.
+** of the column that is indexed, or XN_EXPR (-2) if an expression is being
+** indexed.
 **
 ** If pExpr is a TK_COLUMN column reference, then this routine always returns
 ** true even if that particular column is not indexed, because the column
 ** might be added to an automatic index later.
 */
 static int exprMightBeIndexed(
   SrcList *pFrom,        /* The FROM clause */
+  int op,                /* The specific comparison operator */
   Bitmask mPrereq,       /* Bitmask of FROM clause terms referenced by pExpr */
   Expr *pExpr,           /* An operand of a comparison operator */
   int *piCur,            /* Write the referenced table cursor number here */
@@ -126181,6 +127183,17 @@
   Index *pIdx;
   int i;
   int iCur;
+
+  /* If this expression is a vector to the left or right of a 
+  ** inequality constraint (>, <, >= or <=), perform the processing 
+  ** on the first element of the vector.  */
+  assert( TK_GT+1==TK_LE && TK_GT+2==TK_LT && TK_GT+3==TK_GE );
+  assert( TK_IS<TK_GE && TK_ISNULL<TK_GE && TK_IN<TK_GE );
+  assert( op<=TK_GE );
+  if( pExpr->op==TK_VECTOR && (op>=TK_GT && ALWAYS(op<=TK_GE)) ){
+    pExpr = pExpr->x.pList->a[0].pExpr;
+  }
+
   if( pExpr->op==TK_COLUMN ){
     *piCur = pExpr->iTable;
     *piColumn = pExpr->iColumn;
@@ -126193,10 +127206,10 @@
   for(pIdx=pFrom->a[i].pTab->pIndex; pIdx; pIdx=pIdx->pNext){
     if( pIdx->aColExpr==0 ) continue;
     for(i=0; i<pIdx->nKeyCol; i++){
-      if( pIdx->aiColumn[i]!=(-2) ) continue;
+      if( pIdx->aiColumn[i]!=XN_EXPR ) continue;
       if( sqlite3ExprCompare(pExpr, pIdx->aColExpr->a[i].pExpr, iCur)==0 ){
         *piCur = iCur;
-        *piColumn = -2;
+        *piColumn = XN_EXPR;
         return 1;
       }
     }
@@ -126253,6 +127266,7 @@
   op = pExpr->op;
   if( op==TK_IN ){
     assert( pExpr->pRight==0 );
+    if( sqlite3ExprCheckIN(pParse, pExpr) ) return;
     if( ExprHasProperty(pExpr, EP_xIsSelect) ){
       pTerm->prereqRight = exprSelectUsage(pMaskSet, pExpr->x.pSelect);
     }else{
@@ -126279,18 +127293,26 @@
     Expr *pLeft = sqlite3ExprSkipCollate(pExpr->pLeft);
     Expr *pRight = sqlite3ExprSkipCollate(pExpr->pRight);
     u16 opMask = (pTerm->prereqRight & prereqLeft)==0 ? WO_ALL : WO_EQUIV;
-    if( exprMightBeIndexed(pSrc, prereqLeft, pLeft, &iCur, &iColumn) ){
+
+    if( pTerm->iField>0 ){
+      assert( op==TK_IN );
+      assert( pLeft->op==TK_VECTOR );
+      pLeft = pLeft->x.pList->a[pTerm->iField-1].pExpr;
+    }
+
+    if( exprMightBeIndexed(pSrc, op, prereqLeft, pLeft, &iCur, &iColumn) ){
       pTerm->leftCursor = iCur;
       pTerm->u.leftColumn = iColumn;
       pTerm->eOperator = operatorMask(op) & opMask;
     }
     if( op==TK_IS ) pTerm->wtFlags |= TERM_IS;
     if( pRight 
-     && exprMightBeIndexed(pSrc, pTerm->prereqRight, pRight, &iCur, &iColumn)
+     && exprMightBeIndexed(pSrc, op, pTerm->prereqRight, pRight, &iCur,&iColumn)
     ){
       WhereTerm *pNew;
       Expr *pDup;
       u16 eExtraOp = 0;        /* Extra bits for pNew->eOperator */
+      assert( pTerm->iField==0 );
       if( pTerm->leftCursor>=0 ){
         int idxNew;
         pDup = sqlite3ExprDup(db, pExpr, 0);
@@ -126494,6 +127516,59 @@
   }
 #endif /* SQLITE_OMIT_VIRTUALTABLE */
 
+  /* If there is a vector == or IS term - e.g. "(a, b) == (?, ?)" - create
+  ** new terms for each component comparison - "a = ?" and "b = ?".  The
+  ** new terms completely replace the original vector comparison, which is
+  ** no longer used.
+  **
+  ** This is only required if at least one side of the comparison operation
+  ** is not a sub-select.  */
+  if( pWC->op==TK_AND 
+  && (pExpr->op==TK_EQ || pExpr->op==TK_IS)
+  && sqlite3ExprIsVector(pExpr->pLeft)
+  && ( (pExpr->pLeft->flags & EP_xIsSelect)==0 
+    || (pExpr->pRight->flags & EP_xIsSelect)==0
+  )){
+    int nLeft = sqlite3ExprVectorSize(pExpr->pLeft);
+    int i;
+    assert( nLeft==sqlite3ExprVectorSize(pExpr->pRight) );
+    for(i=0; i<nLeft; i++){
+      int idxNew;
+      Expr *pNew;
+      Expr *pLeft = sqlite3ExprForVectorField(pParse, pExpr->pLeft, i);
+      Expr *pRight = sqlite3ExprForVectorField(pParse, pExpr->pRight, i);
+
+      pNew = sqlite3PExpr(pParse, pExpr->op, pLeft, pRight, 0);
+      idxNew = whereClauseInsert(pWC, pNew, TERM_DYNAMIC);
+      exprAnalyze(pSrc, pWC, idxNew);
+    }
+    pTerm = &pWC->a[idxTerm];
+    pTerm->wtFlags = TERM_CODED|TERM_VIRTUAL;  /* Disable the original */
+    pTerm->eOperator = 0;
+  }
+
+  /* If there is a vector IN term - e.g. "(a, b) IN (SELECT ...)" - create
+  ** a virtual term for each vector component. The expression object
+  ** used by each such virtual term is pExpr (the full vector IN(...) 
+  ** expression). The WhereTerm.iField variable identifies the index within
+  ** the vector on the LHS that the virtual term represents.
+  **
+  ** This only works if the RHS is a simple SELECT, not a compound
+  */
+  if( pWC->op==TK_AND && pExpr->op==TK_IN && pTerm->iField==0
+   && pExpr->pLeft->op==TK_VECTOR
+   && pExpr->x.pSelect->pPrior==0
+  ){
+    int i;
+    for(i=0; i<sqlite3ExprVectorSize(pExpr->pLeft); i++){
+      int idxNew;
+      idxNew = whereClauseInsert(pWC, pExpr, TERM_VIRTUAL);
+      pWC->a[idxNew].iField = i+1;
+      exprAnalyze(pSrc, pWC, idxNew);
+      markTermAsChild(pWC, idxNew, idxTerm);
+    }
+  }
+
 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4
   /* When sqlite_stat3 histogram data is available an operator of the
   ** form "x IS NOT NULL" can sometimes be evaluated more efficiently
@@ -126514,7 +127589,7 @@
 
     pNewExpr = sqlite3PExpr(pParse, TK_GT,
                             sqlite3ExprDup(db, pLeft, 0),
-                            sqlite3PExpr(pParse, TK_NULL, 0, 0, 0), 0);
+                            sqlite3ExprAlloc(db, TK_NULL, 0, 0), 0);
 
     idxNew = whereClauseInsert(pWC, pNewExpr,
                               TERM_VIRTUAL|TERM_DYNAMIC|TERM_VNULL);
@@ -126617,13 +127692,14 @@
 ** tree.
 */
 SQLITE_PRIVATE Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){
-  Bitmask mask = 0;
+  Bitmask mask;
   if( p==0 ) return 0;
   if( p->op==TK_COLUMN ){
     mask = sqlite3WhereGetMask(pMaskSet, p->iTable);
     return mask;
   }
-  mask = sqlite3WhereExprUsage(pMaskSet, p->pRight);
+  assert( !ExprHasProperty(p, EP_TokenOnly) );
+  mask = p->pRight ? sqlite3WhereExprUsage(pMaskSet, p->pRight) : 0;
   if( p->pLeft ) mask |= sqlite3WhereExprUsage(pMaskSet, p->pLeft);
   if( ExprHasProperty(p, EP_xIsSelect) ){
     mask |= exprSelectUsage(pMaskSet, p->x.pSelect);
@@ -126691,7 +127767,7 @@
                       pTab->zName, j);
       return;
     }
-    pColRef = sqlite3PExpr(pParse, TK_COLUMN, 0, 0, 0);
+    pColRef = sqlite3ExprAlloc(pParse->db, TK_COLUMN, 0, 0);
     if( pColRef==0 ) return;
     pColRef->iTable = pItem->iCursor;
     pColRef->iColumn = k++;
@@ -127357,7 +128433,7 @@
   ** transient index on 2nd and subsequent iterations of the loop. */
   v = pParse->pVdbe;
   assert( v!=0 );
-  addrInit = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+  addrInit = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
 
   /* Count the number of columns that will be added to the index
   ** and used to match WHERE clause constraints */
@@ -127532,7 +128608,8 @@
   WhereClause *pWC,
   Bitmask mUnusable,              /* Ignore terms with these prereqs */
   struct SrcList_item *pSrc,
-  ExprList *pOrderBy
+  ExprList *pOrderBy,
+  u16 *pmNoOmit                   /* Mask of terms not to omit */
 ){
   int i, j;
   int nTerm;
@@ -127542,6 +128619,7 @@
   WhereTerm *pTerm;
   int nOrderBy;
   sqlite3_index_info *pIdxInfo;
+  u16 mNoOmit = 0;
 
   /* Count the number of possible WHERE clause constraints referring
   ** to this virtual table */
@@ -127630,6 +128708,15 @@
     assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE );
     assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH );
     assert( pTerm->eOperator & (WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) );
+
+    if( op & (WO_LT|WO_LE|WO_GT|WO_GE)
+     && sqlite3ExprIsVector(pTerm->pExpr->pRight) 
+    ){
+      if( i<16 ) mNoOmit |= (1 << i);
+      if( op==WO_LT ) pIdxCons[j].op = WO_LE;
+      if( op==WO_GT ) pIdxCons[j].op = WO_GE;
+    }
+
     j++;
   }
   for(i=0; i<nOrderBy; i++){
@@ -127638,6 +128725,7 @@
     pIdxOrderBy[i].desc = pOrderBy->a[i].sortOrder;
   }
 
+  *pmNoOmit = mNoOmit;
   return pIdxInfo;
 }
 
@@ -127913,7 +129001,7 @@
 /*
 ** Return the affinity for a single column of an index.
 */
-static char sqlite3IndexColumnAffinity(sqlite3 *db, Index *pIdx, int iCol){
+SQLITE_PRIVATE char sqlite3IndexColumnAffinity(sqlite3 *db, Index *pIdx, int iCol){
   assert( iCol>=0 && iCol<pIdx->nColumn );
   if( !pIdx->zColAff ){
     if( sqlite3IndexAffinityStr(db, pIdx)==0 ) return SQLITE_AFF_BLOB;
@@ -128090,7 +129178,8 @@
     if( nEq==pBuilder->nRecValid ){
       UnpackedRecord *pRec = pBuilder->pRec;
       tRowcnt a[2];
-      u8 aff;
+      int nBtm = pLoop->u.btree.nBtm;
+      int nTop = pLoop->u.btree.nTop;
 
       /* Variable iLower will be set to the estimate of the number of rows in 
       ** the index that are less than the lower bound of the range query. The
@@ -128120,8 +129209,6 @@
         testcase( pRec->nField!=pBuilder->nRecValid );
         pRec->nField = pBuilder->nRecValid;
       }
-      aff = sqlite3IndexColumnAffinity(pParse->db, p, nEq);
-      assert( nEq!=p->nKeyCol || aff==SQLITE_AFF_INTEGER );
       /* Determine iLower and iUpper using ($P) only. */
       if( nEq==0 ){
         iLower = 0;
@@ -128140,17 +129227,20 @@
       if( p->aSortOrder[nEq] ){
         /* The roles of pLower and pUpper are swapped for a DESC index */
         SWAP(WhereTerm*, pLower, pUpper);
+        SWAP(int, nBtm, nTop);
       }
 
       /* If possible, improve on the iLower estimate using ($P:$L). */
       if( pLower ){
-        int bOk;                    /* True if value is extracted from pExpr */
+        int n;                    /* Values extracted from pExpr */
         Expr *pExpr = pLower->pExpr->pRight;
-        rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
-        if( rc==SQLITE_OK && bOk ){
+        rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, nBtm, nEq, &n);
+        if( rc==SQLITE_OK && n ){
           tRowcnt iNew;
+          u16 mask = WO_GT|WO_LE;
+          if( sqlite3ExprVectorSize(pExpr)>n ) mask = (WO_LE|WO_LT);
           iLwrIdx = whereKeyStats(pParse, p, pRec, 0, a);
-          iNew = a[0] + ((pLower->eOperator & (WO_GT|WO_LE)) ? a[1] : 0);
+          iNew = a[0] + ((pLower->eOperator & mask) ? a[1] : 0);
           if( iNew>iLower ) iLower = iNew;
           nOut--;
           pLower = 0;
@@ -128159,13 +129249,15 @@
 
       /* If possible, improve on the iUpper estimate using ($P:$U). */
       if( pUpper ){
-        int bOk;                    /* True if value is extracted from pExpr */
+        int n;                    /* Values extracted from pExpr */
         Expr *pExpr = pUpper->pExpr->pRight;
-        rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
-        if( rc==SQLITE_OK && bOk ){
+        rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, nTop, nEq, &n);
+        if( rc==SQLITE_OK && n ){
           tRowcnt iNew;
+          u16 mask = WO_GT|WO_LE;
+          if( sqlite3ExprVectorSize(pExpr)>n ) mask = (WO_LE|WO_LT);
           iUprIdx = whereKeyStats(pParse, p, pRec, 1, a);
-          iNew = a[0] + ((pUpper->eOperator & (WO_GT|WO_LE)) ? a[1] : 0);
+          iNew = a[0] + ((pUpper->eOperator & mask) ? a[1] : 0);
           if( iNew<iUpper ) iUpper = iNew;
           nOut--;
           pUpper = 0;
@@ -128255,7 +129347,6 @@
   Index *p = pBuilder->pNew->u.btree.pIndex;
   int nEq = pBuilder->pNew->u.btree.nEq;
   UnpackedRecord *pRec = pBuilder->pRec;
-  u8 aff;                   /* Column affinity */
   int rc;                   /* Subfunction return code */
   tRowcnt a[2];             /* Statistics */
   int bOk;
@@ -128279,8 +129370,7 @@
     return SQLITE_OK;
   }
 
-  aff = sqlite3IndexColumnAffinity(pParse->db, p, nEq-1);
-  rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq-1, &bOk);
+  rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, 1, nEq-1, &bOk);
   pBuilder->pRec = pRec;
   if( rc!=SQLITE_OK ) return rc;
   if( bOk==0 ) return SQLITE_NOTFOUND;
@@ -128369,9 +129459,14 @@
       sqlite3_snprintf(sizeof(zLeft),zLeft,"left=%d", pTerm->leftCursor);
     }
     sqlite3DebugPrintf(
-       "TERM-%-3d %p %s %-12s prob=%-3d op=0x%03x wtFlags=0x%04x\n",
+       "TERM-%-3d %p %s %-12s prob=%-3d op=0x%03x wtFlags=0x%04x",
        iTerm, pTerm, zType, zLeft, pTerm->truthProb,
        pTerm->eOperator, pTerm->wtFlags);
+    if( pTerm->iField ){
+      sqlite3DebugPrintf(" iField=%d\n", pTerm->iField);
+    }else{
+      sqlite3DebugPrintf("\n");
+    }
     sqlite3TreeViewExpr(0, pTerm->pExpr, 0);
   }
 }
@@ -128893,6 +129988,72 @@
   if( pLoop->nOut > nRow-iReduce )  pLoop->nOut = nRow - iReduce;
 }
 
+/* 
+** Term pTerm is a vector range comparison operation. The first comparison
+** in the vector can be optimized using column nEq of the index. This
+** function returns the total number of vector elements that can be used
+** as part of the range comparison.
+**
+** For example, if the query is:
+**
+**   WHERE a = ? AND (b, c, d) > (?, ?, ?)
+**
+** and the index:
+**
+**   CREATE INDEX ... ON (a, b, c, d, e)
+**
+** then this function would be invoked with nEq=1. The value returned in
+** this case is 3.
+*/
+static int whereRangeVectorLen(
+  Parse *pParse,       /* Parsing context */
+  int iCur,            /* Cursor open on pIdx */
+  Index *pIdx,         /* The index to be used for a inequality constraint */
+  int nEq,             /* Number of prior equality constraints on same index */
+  WhereTerm *pTerm     /* The vector inequality constraint */
+){
+  int nCmp = sqlite3ExprVectorSize(pTerm->pExpr->pLeft);
+  int i;
+
+  nCmp = MIN(nCmp, (pIdx->nColumn - nEq));
+  for(i=1; i<nCmp; i++){
+    /* Test if comparison i of pTerm is compatible with column (i+nEq) 
+    ** of the index. If not, exit the loop.  */
+    char aff;                     /* Comparison affinity */
+    char idxaff = 0;              /* Indexed columns affinity */
+    CollSeq *pColl;               /* Comparison collation sequence */
+    Expr *pLhs = pTerm->pExpr->pLeft->x.pList->a[i].pExpr;
+    Expr *pRhs = pTerm->pExpr->pRight;
+    if( pRhs->flags & EP_xIsSelect ){
+      pRhs = pRhs->x.pSelect->pEList->a[i].pExpr;
+    }else{
+      pRhs = pRhs->x.pList->a[i].pExpr;
+    }
+
+    /* Check that the LHS of the comparison is a column reference to
+    ** the right column of the right source table. And that the sort
+    ** order of the index column is the same as the sort order of the
+    ** leftmost index column.  */
+    if( pLhs->op!=TK_COLUMN 
+     || pLhs->iTable!=iCur 
+     || pLhs->iColumn!=pIdx->aiColumn[i+nEq] 
+     || pIdx->aSortOrder[i+nEq]!=pIdx->aSortOrder[nEq]
+    ){
+      break;
+    }
+
+    testcase( pLhs->iColumn==XN_ROWID );
+    aff = sqlite3CompareAffinity(pRhs, sqlite3ExprAffinity(pLhs));
+    idxaff = sqlite3TableColumnAffinity(pIdx->pTable, pLhs->iColumn);
+    if( aff!=idxaff ) break;
+
+    pColl = sqlite3BinaryCompareCollSeq(pParse, pLhs, pRhs);
+    if( pColl==0 ) break;
+    if( sqlite3StrICmp(pColl->zName, pIdx->azColl[i+nEq]) ) break;
+  }
+  return i;
+}
+
 /*
 ** Adjust the cost C by the costMult facter T.  This only occurs if
 ** compiled with -DSQLITE_ENABLE_COSTMULT
@@ -128931,6 +130092,8 @@
   Bitmask saved_prereq;           /* Original value of pNew->prereq */
   u16 saved_nLTerm;               /* Original value of pNew->nLTerm */
   u16 saved_nEq;                  /* Original value of pNew->u.btree.nEq */
+  u16 saved_nBtm;                 /* Original value of pNew->u.btree.nBtm */
+  u16 saved_nTop;                 /* Original value of pNew->u.btree.nTop */
   u16 saved_nSkip;                /* Original value of pNew->nSkip */
   u32 saved_wsFlags;              /* Original value of pNew->wsFlags */
   LogEst saved_nOut;              /* Original value of pNew->nOut */
@@ -128941,19 +130104,24 @@
 
   pNew = pBuilder->pNew;
   if( db->mallocFailed ) return SQLITE_NOMEM_BKPT;
+  WHERETRACE(0x800, ("BEGIN addBtreeIdx(%s), nEq=%d\n",
+                     pProbe->zName, pNew->u.btree.nEq));
 
   assert( (pNew->wsFlags & WHERE_VIRTUALTABLE)==0 );
   assert( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 );
   if( pNew->wsFlags & WHERE_BTM_LIMIT ){
     opMask = WO_LT|WO_LE;
   }else{
+    assert( pNew->u.btree.nBtm==0 );
     opMask = WO_EQ|WO_IN|WO_GT|WO_GE|WO_LT|WO_LE|WO_ISNULL|WO_IS;
   }
   if( pProbe->bUnordered ) opMask &= ~(WO_GT|WO_GE|WO_LT|WO_LE);
 
   assert( pNew->u.btree.nEq<pProbe->nColumn );
 
   saved_nEq = pNew->u.btree.nEq;
+  saved_nBtm = pNew->u.btree.nBtm;
+  saved_nTop = pNew->u.btree.nTop;
   saved_nSkip = pNew->nSkip;
   saved_nLTerm = pNew->nLTerm;
   saved_wsFlags = pNew->wsFlags;
@@ -128997,6 +130165,8 @@
 
     pNew->wsFlags = saved_wsFlags;
     pNew->u.btree.nEq = saved_nEq;
+    pNew->u.btree.nBtm = saved_nBtm;
+    pNew->u.btree.nTop = saved_nTop;
     pNew->nLTerm = saved_nLTerm;
     if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */
     pNew->aLTerm[pNew->nLTerm++] = pTerm;
@@ -129013,14 +130183,23 @@
       pNew->wsFlags |= WHERE_COLUMN_IN;
       if( ExprHasProperty(pExpr, EP_xIsSelect) ){
         /* "x IN (SELECT ...)":  TUNING: the SELECT returns 25 rows */
+        int i;
         nIn = 46;  assert( 46==sqlite3LogEst(25) );
+
+        /* The expression may actually be of the form (x, y) IN (SELECT...).
+        ** In this case there is a separate term for each of (x) and (y).
+        ** However, the nIn multiplier should only be applied once, not once
+        ** for each such term. The following loop checks that pTerm is the
+        ** first such term in use, and sets nIn back to 0 if it is not. */
+        for(i=0; i<pNew->nLTerm-1; i++){
+          if( pNew->aLTerm[i] && pNew->aLTerm[i]->pExpr==pExpr ) nIn = 0;
+        }
       }else if( ALWAYS(pExpr->x.pList && pExpr->x.pList->nExpr) ){
         /* "x IN (value, value, ...)" */
         nIn = sqlite3LogEst(pExpr->x.pList->nExpr);
+        assert( nIn>0 );  /* RHS always has 2 or more terms...  The parser
+                          ** changes "x IN (?)" into "x=?". */
       }
-      assert( nIn>0 );  /* RHS always has 2 or more terms...  The parser
-                        ** changes "x IN (?)" into "x=?". */
-
     }else if( eOp & (WO_EQ|WO_IS) ){
       int iCol = pProbe->aiColumn[saved_nEq];
       pNew->wsFlags |= WHERE_COLUMN_EQ;
@@ -129040,6 +130219,9 @@
       testcase( eOp & WO_GT );
       testcase( eOp & WO_GE );
       pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_BTM_LIMIT;
+      pNew->u.btree.nBtm = whereRangeVectorLen(
+          pParse, pSrc->iCursor, pProbe, saved_nEq, pTerm
+      );
       pBtm = pTerm;
       pTop = 0;
       if( pTerm->wtFlags & TERM_LIKEOPT ){
@@ -129052,12 +130234,16 @@
         if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */
         pNew->aLTerm[pNew->nLTerm++] = pTop;
         pNew->wsFlags |= WHERE_TOP_LIMIT;
+        pNew->u.btree.nTop = 1;
       }
     }else{
       assert( eOp & (WO_LT|WO_LE) );
       testcase( eOp & WO_LT );
       testcase( eOp & WO_LE );
       pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_TOP_LIMIT;
+      pNew->u.btree.nTop = whereRangeVectorLen(
+          pParse, pSrc->iCursor, pProbe, saved_nEq, pTerm
+      );
       pTop = pTerm;
       pBtm = (pNew->wsFlags & WHERE_BTM_LIMIT)!=0 ?
                      pNew->aLTerm[pNew->nLTerm-2] : 0;
@@ -129157,6 +130343,8 @@
   }
   pNew->prereq = saved_prereq;
   pNew->u.btree.nEq = saved_nEq;
+  pNew->u.btree.nBtm = saved_nBtm;
+  pNew->u.btree.nTop = saved_nTop;
   pNew->nSkip = saved_nSkip;
   pNew->wsFlags = saved_wsFlags;
   pNew->nOut = saved_nOut;
@@ -129196,6 +130384,8 @@
     pNew->wsFlags = saved_wsFlags;
   }
 
+  WHERETRACE(0x800, ("END addBtreeIdx(%s), nEq=%d, rc=%d\n",
+                      pProbe->zName, saved_nEq, rc));
   return rc;
 }
 
@@ -129278,7 +130468,7 @@
 
 /*
 ** Add all WhereLoop objects for a single table of the join where the table
-** is idenfied by pBuilder->pNew->iTab.  That table is guaranteed to be
+** is identified by pBuilder->pNew->iTab.  That table is guaranteed to be
 ** a b-tree table, not a virtual table.
 **
 ** The costs (WhereLoop.rRun) of the b-tree loops added by this function
@@ -129432,6 +130622,8 @@
     }
     rSize = pProbe->aiRowLogEst[0];
     pNew->u.btree.nEq = 0;
+    pNew->u.btree.nBtm = 0;
+    pNew->u.btree.nTop = 0;
     pNew->nSkip = 0;
     pNew->nLTerm = 0;
     pNew->iSortIdx = 0;
@@ -129560,6 +130752,7 @@
   Bitmask mUsable,                /* Mask of usable tables */
   u16 mExclude,                   /* Exclude terms using these operators */
   sqlite3_index_info *pIdxInfo,   /* Populated object for xBestIndex */
+  u16 mNoOmit,                    /* Do not omit these constraints */
   int *pbIn                       /* OUT: True if plan uses an IN(...) op */
 ){
   WhereClause *pWC = pBuilder->pWC;
@@ -129648,6 +130841,7 @@
       }
     }
   }
+  pNew->u.vtab.omitMask &= ~mNoOmit;
 
   pNew->nLTerm = mxTerm+1;
   assert( pNew->nLTerm<=pNew->nLSlot );
@@ -129721,6 +130915,7 @@
   int bIn;                     /* True if plan uses IN(...) operator */
   WhereLoop *pNew;
   Bitmask mBest;               /* Tables used by best possible plan */
+  u16 mNoOmit;
 
   assert( (mPrereq & mUnusable)==0 );
   pWInfo = pBuilder->pWInfo;
@@ -129729,7 +130924,8 @@
   pNew = pBuilder->pNew;
   pSrc = &pWInfo->pTabList->a[pNew->iTab];
   assert( IsVirtual(pSrc->pTab) );
-  p = allocateIndexInfo(pParse, pWC, mUnusable, pSrc, pBuilder->pOrderBy);
+  p = allocateIndexInfo(pParse, pWC, mUnusable, pSrc, pBuilder->pOrderBy, 
+      &mNoOmit);
   if( p==0 ) return SQLITE_NOMEM_BKPT;
   pNew->rSetup = 0;
   pNew->wsFlags = WHERE_VIRTUALTABLE;
@@ -129743,7 +130939,7 @@
 
   /* First call xBestIndex() with all constraints usable. */
   WHERETRACE(0x40, ("  VirtualOne: all usable\n"));
-  rc = whereLoopAddVirtualOne(pBuilder, mPrereq, ALLBITS, 0, p, &bIn);
+  rc = whereLoopAddVirtualOne(pBuilder, mPrereq, ALLBITS, 0, p, mNoOmit, &bIn);
 
   /* If the call to xBestIndex() with all terms enabled produced a plan
   ** that does not require any source tables (IOW: a plan with mBest==0),
@@ -129760,7 +130956,8 @@
     ** xBestIndex again, this time with IN(...) terms disabled. */
     if( bIn ){
       WHERETRACE(0x40, ("  VirtualOne: all usable w/o IN\n"));
-      rc = whereLoopAddVirtualOne(pBuilder, mPrereq, ALLBITS, WO_IN, p, &bIn);
+      rc = whereLoopAddVirtualOne(
+          pBuilder, mPrereq, ALLBITS, WO_IN, p, mNoOmit, &bIn);
       assert( bIn==0 );
       mBestNoIn = pNew->prereq & ~mPrereq;
       if( mBestNoIn==0 ){
@@ -129786,7 +130983,8 @@
       if( mNext==mBest || mNext==mBestNoIn ) continue;
       WHERETRACE(0x40, ("  VirtualOne: mPrev=%04llx mNext=%04llx\n",
                        (sqlite3_uint64)mPrev, (sqlite3_uint64)mNext));
-      rc = whereLoopAddVirtualOne(pBuilder, mPrereq, mNext|mPrereq, 0, p, &bIn);
+      rc = whereLoopAddVirtualOne(
+          pBuilder, mPrereq, mNext|mPrereq, 0, p, mNoOmit, &bIn);
       if( pNew->prereq==mPrereq ){
         seenZero = 1;
         if( bIn==0 ) seenZeroNoIN = 1;
@@ -129798,7 +130996,8 @@
     ** usable), make a call here with all source tables disabled */
     if( rc==SQLITE_OK && seenZero==0 ){
       WHERETRACE(0x40, ("  VirtualOne: all disabled\n"));
-      rc = whereLoopAddVirtualOne(pBuilder, mPrereq, mPrereq, 0, p, &bIn);
+      rc = whereLoopAddVirtualOne(
+          pBuilder, mPrereq, mPrereq, 0, p, mNoOmit, &bIn);
       if( bIn==0 ) seenZeroNoIN = 1;
     }
 
@@ -129807,7 +131006,8 @@
     ** operator, make a final call to obtain one here.  */
     if( rc==SQLITE_OK && seenZeroNoIN==0 ){
       WHERETRACE(0x40, ("  VirtualOne: all disabled and w/o IN\n"));
-      rc = whereLoopAddVirtualOne(pBuilder, mPrereq, mPrereq, WO_IN, p, &bIn);
+      rc = whereLoopAddVirtualOne(
+          pBuilder, mPrereq, mPrereq, WO_IN, p, mNoOmit, &bIn);
     }
   }
 
@@ -130107,6 +131307,14 @@
       pTerm = sqlite3WhereFindTerm(&pWInfo->sWC, iCur, pOBExpr->iColumn,
                        ~ready, eqOpMask, 0);
       if( pTerm==0 ) continue;
+      if( pTerm->eOperator==WO_IN ){
+        /* IN terms are only valid for sorting in the ORDER BY LIMIT 
+        ** optimization, and then only if they are actually used
+        ** by the query plan */
+        assert( wctrlFlags & WHERE_ORDERBY_LIMIT );
+        for(j=0; j<pLoop->nLTerm && pTerm!=pLoop->aLTerm[j]; j++){}
+        if( j>=pLoop->nLTerm ) continue;
+      }
       if( (pTerm->eOperator&(WO_EQ|WO_IS))!=0 && pOBExpr->iColumn>=0 ){
         const char *z1, *z2;
         pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr);
@@ -130143,20 +131351,42 @@
       rev = revSet = 0;
       distinctColumns = 0;
       for(j=0; j<nColumn; j++){
-        u8 bOnce;   /* True to run the ORDER BY search loop */
+        u8 bOnce = 1; /* True to run the ORDER BY search loop */
 
-        /* Skip over == and IS and ISNULL terms.
-        ** (Also skip IN terms when doing WHERE_ORDERBY_LIMIT processing)
-        */
-        if( j<pLoop->u.btree.nEq
-         && pLoop->nSkip==0
-         && ((i = pLoop->aLTerm[j]->eOperator) & eqOpMask)!=0
-        ){
-          if( i & WO_ISNULL ){
-            testcase( isOrderDistinct );
-            isOrderDistinct = 0;
+        assert( j>=pLoop->u.btree.nEq 
+            || (pLoop->aLTerm[j]==0)==(j<pLoop->nSkip)
+        );
+        if( j<pLoop->u.btree.nEq && j>=pLoop->nSkip ){
+          u16 eOp = pLoop->aLTerm[j]->eOperator;
+
+          /* Skip over == and IS and ISNULL terms.  (Also skip IN terms when
+          ** doing WHERE_ORDERBY_LIMIT processing). 
+          **
+          ** If the current term is a column of an ((?,?) IN (SELECT...)) 
+          ** expression for which the SELECT returns more than one column,
+          ** check that it is the only column used by this loop. Otherwise,
+          ** if it is one of two or more, none of the columns can be
+          ** considered to match an ORDER BY term.  */
+          if( (eOp & eqOpMask)!=0 ){
+            if( eOp & WO_ISNULL ){
+              testcase( isOrderDistinct );
+              isOrderDistinct = 0;
+            }
+            continue;  
+          }else if( ALWAYS(eOp & WO_IN) ){
+            /* ALWAYS() justification: eOp is an equality operator due to the
+            ** j<pLoop->u.btree.nEq constraint above.  Any equality other
+            ** than WO_IN is captured by the previous "if".  So this one
+            ** always has to be WO_IN. */
+            Expr *pX = pLoop->aLTerm[j]->pExpr;
+            for(i=j+1; i<pLoop->u.btree.nEq; i++){
+              if( pLoop->aLTerm[i]->pExpr==pX ){
+                assert( (pLoop->aLTerm[i]->eOperator & WO_IN) );
+                bOnce = 0;
+                break;
+              }
+            }
           }
-          continue;  
         }
 
         /* Get the column number in the table (iColumn) and sort order
@@ -130185,7 +131415,6 @@
         /* Find the ORDER BY term that corresponds to the j-th column
         ** of the index and mark that ORDER BY term off 
         */
-        bOnce = 1;
         isMatch = 0;
         for(i=0; bOnce && i<nOrderBy; i++){
           if( MASKBIT(i) & obSat ) continue;
@@ -130222,7 +131451,7 @@
           }
         }
         if( isMatch ){
-          if( iColumn<0 ){
+          if( iColumn==XN_ROWID ){
             testcase( distinctColumns==0 );
             distinctColumns = 1;
           }
@@ -130677,13 +131906,20 @@
       pWInfo->revMask = pFrom->revLoop;
       if( pWInfo->nOBSat<=0 ){
         pWInfo->nOBSat = 0;
-        if( nLoop>0 && (pFrom->aLoop[nLoop-1]->wsFlags & WHERE_ONEROW)==0 ){
-          Bitmask m = 0;
-          int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, pFrom,
+        if( nLoop>0 ){
+          u32 wsFlags = pFrom->aLoop[nLoop-1]->wsFlags;
+          if( (wsFlags & WHERE_ONEROW)==0 
+           && (wsFlags&(WHERE_IPK|WHERE_COLUMN_IN))!=(WHERE_IPK|WHERE_COLUMN_IN)
+          ){
+            Bitmask m = 0;
+            int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, pFrom,
                       WHERE_ORDERBY_LIMIT, nLoop-1, pFrom->aLoop[nLoop-1], &m);
-          if( rc==pWInfo->pOrderBy->nExpr ){
-            pWInfo->bOrderedInnerLoop = 1;
-            pWInfo->revMask = m;
+            testcase( wsFlags & WHERE_IPK );
+            testcase( wsFlags & WHERE_COLUMN_IN );
+            if( rc==pWInfo->pOrderBy->nExpr ){
+              pWInfo->bOrderedInnerLoop = 1;
+              pWInfo->revMask = m;
+            }
           }
         }
       }
@@ -130960,22 +132196,25 @@
   ** some architectures. Hence the ROUND8() below.
   */
   nByteWInfo = ROUND8(sizeof(WhereInfo)+(nTabList-1)*sizeof(WhereLevel));
-  pWInfo = sqlite3DbMallocZero(db, nByteWInfo + sizeof(WhereLoop));
+  pWInfo = sqlite3DbMallocRawNN(db, nByteWInfo + sizeof(WhereLoop));
   if( db->mallocFailed ){
     sqlite3DbFree(db, pWInfo);
     pWInfo = 0;
     goto whereBeginError;
   }
-  pWInfo->aiCurOnePass[0] = pWInfo->aiCurOnePass[1] = -1;
-  pWInfo->nLevel = nTabList;
   pWInfo->pParse = pParse;
   pWInfo->pTabList = pTabList;
   pWInfo->pOrderBy = pOrderBy;
   pWInfo->pDistinctSet = pDistinctSet;
+  pWInfo->aiCurOnePass[0] = pWInfo->aiCurOnePass[1] = -1;
+  pWInfo->nLevel = nTabList;
   pWInfo->iBreak = pWInfo->iContinue = sqlite3VdbeMakeLabel(v);
   pWInfo->wctrlFlags = wctrlFlags;
   pWInfo->iLimit = iAuxArg;
   pWInfo->savedNQueryLoop = pParse->nQueryLoop;
+  memset(&pWInfo->nOBSat, 0, 
+         offsetof(WhereInfo,sWC) - offsetof(WhereInfo,nOBSat));
+  memset(&pWInfo->a[0], 0, sizeof(WhereLoop)+nTabList*sizeof(WhereLevel));
   assert( pWInfo->eOnePass==ONEPASS_OFF );  /* ONEPASS defaults to OFF */
   pMaskSet = &pWInfo->sMaskSet;
   sWLB.pWInfo = pWInfo;
@@ -131379,10 +132618,12 @@
       sqlite3VdbeResolveLabel(v, pLevel->addrNxt);
       for(j=pLevel->u.in.nIn, pIn=&pLevel->u.in.aInLoop[j-1]; j>0; j--, pIn--){
         sqlite3VdbeJumpHere(v, pIn->addrInTop+1);
-        sqlite3VdbeAddOp2(v, pIn->eEndLoopOp, pIn->iCur, pIn->addrInTop);
-        VdbeCoverage(v);
-        VdbeCoverageIf(v, pIn->eEndLoopOp==OP_PrevIfOpen);
-        VdbeCoverageIf(v, pIn->eEndLoopOp==OP_NextIfOpen);
+        if( pIn->eEndLoopOp!=OP_Noop ){
+          sqlite3VdbeAddOp2(v, pIn->eEndLoopOp, pIn->iCur, pIn->addrInTop);
+          VdbeCoverage(v);
+          VdbeCoverageIf(v, pIn->eEndLoopOp==OP_PrevIfOpen);
+          VdbeCoverageIf(v, pIn->eEndLoopOp==OP_NextIfOpen);
+        }
         sqlite3VdbeJumpHere(v, pIn->addrInTop-1);
       }
     }
@@ -131585,15 +132826,6 @@
 };
 
 /*
-** An instance of this structure is used to store the LIKE,
-** GLOB, NOT LIKE, and NOT GLOB operators.
-*/
-struct LikeOp {
-  Token eOperator;  /* "like" or "glob" or "regexp" */
-  int bNot;         /* True if the NOT keyword is present */
-};
-
-/*
 ** An instance of the following structure describes the event of a
 ** TRIGGER.  "a" is the event type, one of TK_UPDATE, TK_INSERT,
 ** TK_DELETE, or TK_INSTEAD.  If the event is of the form
@@ -131605,11 +132837,6 @@
 struct TrigEvent { int a; IdList * b; };
 
 /*
-** An instance of this structure holds the ATTACH key and the key type.
-*/
-struct AttachKey { int type;  Token key; };
-
-/*
 ** Disable lookaside memory allocation for objects that might be
 ** shared across database connections.
 */
@@ -131655,7 +132882,24 @@
   ** that created the expression.
   */
   static void spanExpr(ExprSpan *pOut, Parse *pParse, int op, Token t){
-    pOut->pExpr = sqlite3PExpr(pParse, op, 0, 0, &t);
+    Expr *p = sqlite3DbMallocRawNN(pParse->db, sizeof(Expr)+t.n+1);
+    if( p ){
+      memset(p, 0, sizeof(Expr));
+      p->op = (u8)op;
+      p->flags = EP_Leaf;
+      p->iAgg = -1;
+      p->u.zToken = (char*)&p[1];
+      memcpy(p->u.zToken, t.z, t.n);
+      p->u.zToken[t.n] = 0;
+      if( sqlite3Isquote(p->u.zToken[0]) ){
+        if( p->u.zToken[0]=='"' ) p->flags |= EP_DblQuoted;
+        sqlite3Dequote(p->u.zToken);
+      }
+#if SQLITE_MAX_EXPR_DEPTH>0
+      p->nHeight = 1;
+#endif  
+    }
+    pOut->pExpr = p;
     pOut->zStart = t.z;
     pOut->zEnd = &t.z[t.n];
   }
@@ -131818,7 +133062,6 @@
   With* yy285;
   struct TrigEvent yy332;
   struct LimitVal yy354;
-  struct LikeOp yy392;
   struct {int value; int mask;} yy497;
 } YYMINORTYPE;
 #ifndef YYSTACKDEPTH
@@ -131829,16 +133072,16 @@
 #define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse
 #define sqlite3ParserARG_STORE yypParser->pParse = pParse
 #define YYFALLBACK 1
-#define YYNSTATE             443
-#define YYNRULE              328
-#define YY_MAX_SHIFT         442
-#define YY_MIN_SHIFTREDUCE   653
-#define YY_MAX_SHIFTREDUCE   980
-#define YY_MIN_REDUCE        981
-#define YY_MAX_REDUCE        1308
-#define YY_ERROR_ACTION      1309
-#define YY_ACCEPT_ACTION     1310
-#define YY_NO_ACTION         1311
+#define YYNSTATE             456
+#define YYNRULE              332
+#define YY_MAX_SHIFT         455
+#define YY_MIN_SHIFTREDUCE   668
+#define YY_MAX_SHIFTREDUCE   999
+#define YY_MIN_REDUCE        1000
+#define YY_MAX_REDUCE        1331
+#define YY_ERROR_ACTION      1332
+#define YY_ACCEPT_ACTION     1333
+#define YY_NO_ACTION         1334
 /************* End control #defines *******************************************/
 
 /* Define the yytestcase() macro to be a no-op if is not already defined
@@ -131870,7 +133113,7 @@
 **
 **   N between YY_MIN_REDUCE            Reduce by rule N-YY_MIN_REDUCE
 **     and YY_MAX_REDUCE
-
+**
 **   N == YY_ERROR_ACTION               A syntax error has occurred.
 **
 **   N == YY_ACCEPT_ACTION              The parser accepts its input.
@@ -131879,16 +133122,20 @@
 **                                      slots in the yy_action[] table.
 **
 ** The action table is constructed as a single large table named yy_action[].
-** Given state S and lookahead X, the action is computed as
+** Given state S and lookahead X, the action is computed as either:
 **
-**      yy_action[ yy_shift_ofst[S] + X ]
+**    (A)   N = yy_action[ yy_shift_ofst[S] + X ]
+**    (B)   N = yy_default[S]
 **
-** If the index value yy_shift_ofst[S]+X is out of range or if the value
-** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X or if yy_shift_ofst[S]
-** is equal to YY_SHIFT_USE_DFLT, it means that the action is not in the table
-** and that yy_default[S] should be used instead.  
+** The (A) formula is preferred.  The B formula is used instead if:
+**    (1)  The yy_shift_ofst[S]+X value is out of range, or
+**    (2)  yy_lookahead[yy_shift_ofst[S]+X] is not equal to X, or
+**    (3)  yy_shift_ofst[S] equal YY_SHIFT_USE_DFLT.
+** (Implementation note: YY_SHIFT_USE_DFLT is chosen so that
+** YY_SHIFT_USE_DFLT+X will be out of range for all possible lookaheads X.
+** Hence only tests (1) and (2) need to be evaluated.)
 **
-** The formula above is for computing the action when the lookahead is
+** The formulas above are for computing the action when the lookahead is
 ** a terminal symbol.  If the lookahead is a non-terminal (as occurs after
 ** a reduce action) then the yy_reduce_ofst[] array is used in place of
 ** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of
@@ -131906,159 +133153,165 @@
 **  yy_default[]       Default action for each state.
 **
 *********** Begin parsing tables **********************************************/
-#define YY_ACTTAB_COUNT (1507)
+#define YY_ACTTAB_COUNT (1567)
 static const YYACTIONTYPE yy_action[] = {
- /*     0 */   317,  814,  341,  808,    5,  195,  195,  802,   93,   94,
- /*    10 */    84,  823,  823,  835,  838,  827,  827,   91,   91,   92,
- /*    20 */    92,   92,   92,  293,   90,   90,   90,   90,   89,   89,
- /*    30 */    88,   88,   88,   87,  341,  317,  958,  958,  807,  807,
- /*    40 */   807,  928,  344,   93,   94,   84,  823,  823,  835,  838,
- /*    50 */   827,  827,   91,   91,   92,   92,   92,   92,  328,   90,
- /*    60 */    90,   90,   90,   89,   89,   88,   88,   88,   87,  341,
- /*    70 */    89,   89,   88,   88,   88,   87,  341,  776,  958,  958,
- /*    80 */   317,   88,   88,   88,   87,  341,  777,   69,   93,   94,
- /*    90 */    84,  823,  823,  835,  838,  827,  827,   91,   91,   92,
- /*   100 */    92,   92,   92,  437,   90,   90,   90,   90,   89,   89,
- /*   110 */    88,   88,   88,   87,  341, 1310,  147,  147,    2,  317,
- /*   120 */    76,   25,   74,   49,   49,   87,  341,   93,   94,   84,
- /*   130 */   823,  823,  835,  838,  827,  827,   91,   91,   92,   92,
- /*   140 */    92,   92,   95,   90,   90,   90,   90,   89,   89,   88,
- /*   150 */    88,   88,   87,  341,  939,  939,  317,  260,  415,  400,
- /*   160 */   398,   58,  737,  737,   93,   94,   84,  823,  823,  835,
- /*   170 */   838,  827,  827,   91,   91,   92,   92,   92,   92,   57,
- /*   180 */    90,   90,   90,   90,   89,   89,   88,   88,   88,   87,
- /*   190 */   341,  317, 1253,  928,  344,  269,  940,  941,  242,   93,
- /*   200 */    94,   84,  823,  823,  835,  838,  827,  827,   91,   91,
- /*   210 */    92,   92,   92,   92,  293,   90,   90,   90,   90,   89,
- /*   220 */    89,   88,   88,   88,   87,  341,  317,  919, 1303,  793,
- /*   230 */   691, 1303,  724,  724,   93,   94,   84,  823,  823,  835,
- /*   240 */   838,  827,  827,   91,   91,   92,   92,   92,   92,  337,
- /*   250 */    90,   90,   90,   90,   89,   89,   88,   88,   88,   87,
- /*   260 */   341,  317,  114,  919, 1304,  684,  395, 1304,  124,   93,
- /*   270 */    94,   84,  823,  823,  835,  838,  827,  827,   91,   91,
- /*   280 */    92,   92,   92,   92,  683,   90,   90,   90,   90,   89,
- /*   290 */    89,   88,   88,   88,   87,  341,  317,   86,   83,  169,
- /*   300 */   801,  917,  234,  399,   93,   94,   84,  823,  823,  835,
- /*   310 */   838,  827,  827,   91,   91,   92,   92,   92,   92,  686,
- /*   320 */    90,   90,   90,   90,   89,   89,   88,   88,   88,   87,
- /*   330 */   341,  317,  436,  742,   86,   83,  169,  917,  741,   93,
- /*   340 */    94,   84,  823,  823,  835,  838,  827,  827,   91,   91,
- /*   350 */    92,   92,   92,   92,  902,   90,   90,   90,   90,   89,
- /*   360 */    89,   88,   88,   88,   87,  341,  317,  321,  434,  434,
- /*   370 */   434,    1,  722,  722,   93,   94,   84,  823,  823,  835,
- /*   380 */   838,  827,  827,   91,   91,   92,   92,   92,   92,  190,
- /*   390 */    90,   90,   90,   90,   89,   89,   88,   88,   88,   87,
- /*   400 */   341,  317,  685,  292,  939,  939,  150,  977,  310,   93,
- /*   410 */    94,   84,  823,  823,  835,  838,  827,  827,   91,   91,
- /*   420 */    92,   92,   92,   92,  437,   90,   90,   90,   90,   89,
- /*   430 */    89,   88,   88,   88,   87,  341,  926,    2,  372,  719,
- /*   440 */   698,  369,  950,  317,   49,   49,  940,  941,  719,  177,
- /*   450 */    72,   93,   94,   84,  823,  823,  835,  838,  827,  827,
- /*   460 */    91,   91,   92,   92,   92,   92,  322,   90,   90,   90,
- /*   470 */    90,   89,   89,   88,   88,   88,   87,  341,  317,  415,
- /*   480 */   405,  824,  824,  836,  839,   75,   93,   82,   84,  823,
- /*   490 */   823,  835,  838,  827,  827,   91,   91,   92,   92,   92,
- /*   500 */    92,  430,   90,   90,   90,   90,   89,   89,   88,   88,
- /*   510 */    88,   87,  341,  317,  340,  340,  340,  658,  659,  660,
- /*   520 */   333,  288,   94,   84,  823,  823,  835,  838,  827,  827,
- /*   530 */    91,   91,   92,   92,   92,   92,  437,   90,   90,   90,
- /*   540 */    90,   89,   89,   88,   88,   88,   87,  341,  317,  882,
- /*   550 */   882,  375,  828,   66,  330,  409,   49,   49,   84,  823,
- /*   560 */   823,  835,  838,  827,  827,   91,   91,   92,   92,   92,
- /*   570 */    92,  351,   90,   90,   90,   90,   89,   89,   88,   88,
- /*   580 */    88,   87,  341,   80,  432,  742,    3, 1180,  351,  350,
- /*   590 */   741,  334,  796,  939,  939,  761,   80,  432,  278,    3,
- /*   600 */   204,  161,  279,  393,  274,  392,  191,  362,  437,  277,
- /*   610 */   745,   77,   78,  272,  800,  254,  355,  243,   79,  342,
- /*   620 */   342,   86,   83,  169,   77,   78,  234,  399,   49,   49,
- /*   630 */   435,   79,  342,  342,  437,  940,  941,  186,  442,  655,
- /*   640 */   390,  387,  386,  435,  235,  213,  108,  421,  761,  351,
- /*   650 */   437,  385,  167,  732,   10,   10,  124,  124,  671,  814,
- /*   660 */   421,  439,  438,  415,  414,  802,  362,  168,  327,  124,
- /*   670 */    49,   49,  814,  219,  439,  438,  800,  186,  802,  326,
- /*   680 */   390,  387,  386,  437, 1248, 1248,   23,  939,  939,   80,
- /*   690 */   432,  385,    3,  761,  416,  876,  807,  807,  807,  809,
- /*   700 */    19,  290,  149,   49,   49,  415,  396,  260,  910,  807,
- /*   710 */   807,  807,  809,   19,  312,  237,  145,   77,   78,  746,
- /*   720 */   168,  702,  437,  149,   79,  342,  342,  114,  358,  940,
- /*   730 */   941,  302,  223,  397,  345,  313,  435,  260,  415,  417,
- /*   740 */   858,  374,   31,   31,   80,  432,  761,    3,  348,   92,
- /*   750 */    92,   92,   92,  421,   90,   90,   90,   90,   89,   89,
- /*   760 */    88,   88,   88,   87,  341,  814,  114,  439,  438,  796,
- /*   770 */   367,  802,   77,   78,  701,  796,  124, 1187,  220,   79,
- /*   780 */   342,  342,  124,  747,  734,  939,  939,  775,  404,  939,
- /*   790 */   939,  435,  254,  360,  253,  402,  895,  346,  254,  360,
- /*   800 */   253,  774,  807,  807,  807,  809,   19,  800,  421,   90,
- /*   810 */    90,   90,   90,   89,   89,   88,   88,   88,   87,  341,
- /*   820 */   814,  114,  439,  438,  939,  939,  802,  940,  941,  114,
- /*   830 */   437,  940,  941,   86,   83,  169,  192,  166,  309,  979,
- /*   840 */    70,  432,  700,    3,  382,  870,  238,   86,   83,  169,
- /*   850 */    10,   10,  361,  406,  763,  190,  222,  807,  807,  807,
- /*   860 */   809,   19,  870,  872,  329,   24,  940,  941,   77,   78,
- /*   870 */   359,  437,  335,  260,  218,   79,  342,  342,  437,  307,
- /*   880 */   306,  305,  207,  303,  339,  338,  668,  435,  339,  338,
- /*   890 */   407,   10,   10,  762,  216,  216,  939,  939,   49,   49,
- /*   900 */   437,  260,   97,  241,  421,  225,  402,  189,  188,  187,
- /*   910 */   309,  918,  980,  149,  221,  898,  814,  868,  439,  438,
- /*   920 */    10,   10,  802,  870,  915,  316,  898,  163,  162,  171,
- /*   930 */   249,  240,  322,  410,  412,  687,  687,  272,  940,  941,
- /*   940 */   239,  965,  901,  437,  226,  403,  226,  437,  963,  367,
- /*   950 */   964,  173,  248,  807,  807,  807,  809,   19,  174,  367,
- /*   960 */   899,  124,  172,   48,   48,    9,    9,   35,   35,  966,
- /*   970 */   966,  899,  363,  966,  966,  814,  900,  808,  725,  939,
- /*   980 */   939,  802,  895,  318,  980,  324,  125,  900,  726,  420,
- /*   990 */    92,   92,   92,   92,   85,   90,   90,   90,   90,   89,
- /*  1000 */    89,   88,   88,   88,   87,  341,  216,  216,  437,  946,
- /*  1010 */   349,  292,  807,  807,  807,  114,  291,  693,  402,  705,
- /*  1020 */   890,  940,  941,  437,  245,  889,  247,  437,   36,   36,
- /*  1030 */   437,  353,  391,  437,  260,  252,  260,  437,  361,  437,
- /*  1040 */   706,  437,  370,   12,   12,  224,  437,   27,   27,  437,
- /*  1050 */    37,   37,  437,   38,   38,  752,  368,   39,   39,   28,
- /*  1060 */    28,   29,   29,  215,  166,  331,   40,   40,  437,   41,
- /*  1070 */    41,  437,   42,   42,  437,  866,  246,  731,  437,  879,
- /*  1080 */   437,  256,  437,  878,  437,  267,  437,  261,   11,   11,
- /*  1090 */   437,   43,   43,  437,   99,   99,  437,  373,   44,   44,
- /*  1100 */    45,   45,   32,   32,   46,   46,   47,   47,  437,  426,
- /*  1110 */    33,   33,  776,  116,  116,  437,  117,  117,  437,  124,
- /*  1120 */   437,  777,  437,  260,  437,  957,  437,  352,  118,  118,
- /*  1130 */   437,  195,  437,  111,  437,   53,   53,  264,   34,   34,
- /*  1140 */   100,  100,   50,   50,  101,  101,  102,  102,  437,  260,
- /*  1150 */    98,   98,  115,  115,  113,  113,  437,  262,  437,  265,
- /*  1160 */   437,  943,  958,  437,  727,  437,  681,  437,  106,  106,
- /*  1170 */    68,  437,  893,  730,  437,  365,  105,  105,  103,  103,
- /*  1180 */   104,  104,  217,   52,   52,   54,   54,   51,   51,  694,
- /*  1190 */   259,   26,   26,  266,   30,   30,  677,  323,  433,  323,
- /*  1200 */   674,  423,  427,  943,  958,  114,  114,  431,  681,  865,
- /*  1210 */  1277,  233,  366,  714,  112,   20,  154,  704,  703,  810,
- /*  1220 */   914,   55,  159,  311,  798,  255,  383,  194,   68,  200,
- /*  1230 */    21,  694,  268,  114,  114,  114,  270,  711,  712,   68,
- /*  1240 */   114,  739,  770,  715,   71,  194,  861,  875,  875,  200,
- /*  1250 */   696,  865,  874,  874,  679,  699,  273,  110,  229,  419,
- /*  1260 */   768,  810,  799,  378,  748,  759,  418,  210,  294,  281,
- /*  1270 */   295,  806,  283,  682,  676,  665,  664,  666,  933,  151,
- /*  1280 */   285,    7, 1267,  308,  251,  790,  354,  244,  892,  364,
- /*  1290 */   287,  422,  300,  164,  160,  936,  974,  127,  197,  137,
- /*  1300 */   909,  907,  971,  388,  276,  863,  862,   56,  698,  325,
- /*  1310 */   148,   59,  122,   66,  356,  381,  357,  176,  152,   62,
- /*  1320 */   371,  130,  877,  181,  377,  760,  211,  182,  132,  133,
- /*  1330 */   134,  135,  258,  146,  140,  795,  787,  263,  183,  379,
- /*  1340 */   667,  394,  184,  332,  894,  314,  718,  717,  857,  716,
- /*  1350 */   696,  315,  709,  690,   65,  196,    6,  408,  289,  708,
- /*  1360 */   275,  689,  688,  948,  756,  757,  280,  282,  425,  755,
- /*  1370 */   284,  336,   73,   67,  754,  429,  411,   96,  286,  413,
- /*  1380 */   205,  934,  673,   22,  209,  440,  119,  120,  109,  206,
- /*  1390 */   208,  441,  662,  661,  656,  843,  654,  343,  158,  236,
- /*  1400 */   170,  347,  107,  227,  121,  738,  873,  298,  296,  297,
- /*  1410 */   299,  871,  794,  128,  129,  728,  230,  131,  175,  250,
- /*  1420 */   888,  136,  138,  231,  232,  139,   60,   61,  891,  178,
- /*  1430 */   179,  887,    8,   13,  180,  257,  880,  968,  194,  141,
- /*  1440 */   142,  376,  153,  670,  380,  185,  143,  277,   63,  384,
- /*  1450 */    14,  707,  271,   15,  389,   64,  319,  320,  126,  228,
- /*  1460 */   813,  812,  841,  736,  123,   16,  401,  740,    4,  769,
- /*  1470 */   165,  212,  214,  193,  144,  764,   71,   68,   17,   18,
- /*  1480 */   856,  842,  840,  897,  845,  896,  199,  198,  923,  155,
- /*  1490 */   424,  929,  924,  156,  201,  202,  428,  844,  157,  203,
- /*  1500 */   811,  680,   81, 1269, 1268,  301,  304,
+ /*     0 */   325,  832,  351,  825,    5,  203,  203,  819,   99,  100,
+ /*    10 */    90,  842,  842,  854,  857,  846,  846,   97,   97,   98,
+ /*    20 */    98,   98,   98,  301,   96,   96,   96,   96,   95,   95,
+ /*    30 */    94,   94,   94,   93,  351,  325,  977,  977,  824,  824,
+ /*    40 */   826,  947,  354,   99,  100,   90,  842,  842,  854,  857,
+ /*    50 */   846,  846,   97,   97,   98,   98,   98,   98,  338,   96,
+ /*    60 */    96,   96,   96,   95,   95,   94,   94,   94,   93,  351,
+ /*    70 */    95,   95,   94,   94,   94,   93,  351,  791,  977,  977,
+ /*    80 */   325,   94,   94,   94,   93,  351,  792,   75,   99,  100,
+ /*    90 */    90,  842,  842,  854,  857,  846,  846,   97,   97,   98,
+ /*   100 */    98,   98,   98,  450,   96,   96,   96,   96,   95,   95,
+ /*   110 */    94,   94,   94,   93,  351, 1333,  155,  155,    2,  325,
+ /*   120 */   275,  146,  132,   52,   52,   93,  351,   99,  100,   90,
+ /*   130 */   842,  842,  854,  857,  846,  846,   97,   97,   98,   98,
+ /*   140 */    98,   98,  101,   96,   96,   96,   96,   95,   95,   94,
+ /*   150 */    94,   94,   93,  351,  958,  958,  325,  268,  428,  413,
+ /*   160 */   411,   61,  752,  752,   99,  100,   90,  842,  842,  854,
+ /*   170 */   857,  846,  846,   97,   97,   98,   98,   98,   98,   60,
+ /*   180 */    96,   96,   96,   96,   95,   95,   94,   94,   94,   93,
+ /*   190 */   351,  325,  270,  329,  273,  277,  959,  960,  250,   99,
+ /*   200 */   100,   90,  842,  842,  854,  857,  846,  846,   97,   97,
+ /*   210 */    98,   98,   98,   98,  301,   96,   96,   96,   96,   95,
+ /*   220 */    95,   94,   94,   94,   93,  351,  325,  938, 1326,  698,
+ /*   230 */   706, 1326,  242,  412,   99,  100,   90,  842,  842,  854,
+ /*   240 */   857,  846,  846,   97,   97,   98,   98,   98,   98,  347,
+ /*   250 */    96,   96,   96,   96,   95,   95,   94,   94,   94,   93,
+ /*   260 */   351,  325,  938, 1327,  384,  699, 1327,  381,  379,   99,
+ /*   270 */   100,   90,  842,  842,  854,  857,  846,  846,   97,   97,
+ /*   280 */    98,   98,   98,   98,  701,   96,   96,   96,   96,   95,
+ /*   290 */    95,   94,   94,   94,   93,  351,  325,   92,   89,  178,
+ /*   300 */   833,  936,  373,  700,   99,  100,   90,  842,  842,  854,
+ /*   310 */   857,  846,  846,   97,   97,   98,   98,   98,   98,  375,
+ /*   320 */    96,   96,   96,   96,   95,   95,   94,   94,   94,   93,
+ /*   330 */   351,  325, 1276,  947,  354,  818,  936,  739,  739,   99,
+ /*   340 */   100,   90,  842,  842,  854,  857,  846,  846,   97,   97,
+ /*   350 */    98,   98,   98,   98,  230,   96,   96,   96,   96,   95,
+ /*   360 */    95,   94,   94,   94,   93,  351,  325,  969,  227,   92,
+ /*   370 */    89,  178,  373,  300,   99,  100,   90,  842,  842,  854,
+ /*   380 */   857,  846,  846,   97,   97,   98,   98,   98,   98,  921,
+ /*   390 */    96,   96,   96,   96,   95,   95,   94,   94,   94,   93,
+ /*   400 */   351,  325,  449,  447,  447,  447,  147,  737,  737,   99,
+ /*   410 */   100,   90,  842,  842,  854,  857,  846,  846,   97,   97,
+ /*   420 */    98,   98,   98,   98,  296,   96,   96,   96,   96,   95,
+ /*   430 */    95,   94,   94,   94,   93,  351,  325,  419,  231,  958,
+ /*   440 */   958,  158,   25,  422,   99,  100,   90,  842,  842,  854,
+ /*   450 */   857,  846,  846,   97,   97,   98,   98,   98,   98,  450,
+ /*   460 */    96,   96,   96,   96,   95,   95,   94,   94,   94,   93,
+ /*   470 */   351,  443,  224,  224,  420,  958,  958,  962,  325,   52,
+ /*   480 */    52,  959,  960,  176,  415,   78,   99,  100,   90,  842,
+ /*   490 */   842,  854,  857,  846,  846,   97,   97,   98,   98,   98,
+ /*   500 */    98,  379,   96,   96,   96,   96,   95,   95,   94,   94,
+ /*   510 */    94,   93,  351,  325,  428,  418,  298,  959,  960,  962,
+ /*   520 */    81,   99,   88,   90,  842,  842,  854,  857,  846,  846,
+ /*   530 */    97,   97,   98,   98,   98,   98,  717,   96,   96,   96,
+ /*   540 */    96,   95,   95,   94,   94,   94,   93,  351,  325,  843,
+ /*   550 */   843,  855,  858,  996,  318,  343,  379,  100,   90,  842,
+ /*   560 */   842,  854,  857,  846,  846,   97,   97,   98,   98,   98,
+ /*   570 */    98,  450,   96,   96,   96,   96,   95,   95,   94,   94,
+ /*   580 */    94,   93,  351,  325,  350,  350,  350,  260,  377,  340,
+ /*   590 */   929,   52,   52,   90,  842,  842,  854,  857,  846,  846,
+ /*   600 */    97,   97,   98,   98,   98,   98,  361,   96,   96,   96,
+ /*   610 */    96,   95,   95,   94,   94,   94,   93,  351,   86,  445,
+ /*   620 */   847,    3, 1203,  361,  360,  378,  344,  813,  958,  958,
+ /*   630 */  1300,   86,  445,  729,    3,  212,  169,  287,  405,  282,
+ /*   640 */   404,  199,  232,  450,  300,  760,   83,   84,  280,  245,
+ /*   650 */   262,  365,  251,   85,  352,  352,   92,   89,  178,   83,
+ /*   660 */    84,  242,  412,   52,   52,  448,   85,  352,  352,  246,
+ /*   670 */   959,  960,  194,  455,  670,  402,  399,  398,  448,  243,
+ /*   680 */   221,  114,  434,  776,  361,  450,  397,  268,  747,  224,
+ /*   690 */   224,  132,  132,  198,  832,  434,  452,  451,  428,  427,
+ /*   700 */   819,  415,  734,  713,  132,   52,   52,  832,  268,  452,
+ /*   710 */   451,  734,  194,  819,  363,  402,  399,  398,  450, 1271,
+ /*   720 */  1271,   23,  958,  958,   86,  445,  397,    3,  228,  429,
+ /*   730 */   895,  824,  824,  826,  827,   19,  203,  720,   52,   52,
+ /*   740 */   428,  408,  439,  249,  824,  824,  826,  827,   19,  229,
+ /*   750 */   403,  153,   83,   84,  761,  177,  241,  450,  721,   85,
+ /*   760 */   352,  352,  120,  157,  959,  960,   58,  977,  409,  355,
+ /*   770 */   330,  448,  268,  428,  430,  320,  790,   32,   32,   86,
+ /*   780 */   445,  776,    3,  341,   98,   98,   98,   98,  434,   96,
+ /*   790 */    96,   96,   96,   95,   95,   94,   94,   94,   93,  351,
+ /*   800 */   832,  120,  452,  451,  813,  887,  819,   83,   84,  977,
+ /*   810 */   813,  132,  410,  920,   85,  352,  352,  132,  407,  789,
+ /*   820 */   958,  958,   92,   89,  178,  917,  448,  262,  370,  261,
+ /*   830 */    82,  914,   80,  262,  370,  261,  776,  824,  824,  826,
+ /*   840 */   827,   19,  934,  434,   96,   96,   96,   96,   95,   95,
+ /*   850 */    94,   94,   94,   93,  351,  832,   74,  452,  451,  958,
+ /*   860 */   958,  819,  959,  960,  120,   92,   89,  178,  945,    2,
+ /*   870 */   918,  965,  268,    1,  976,   76,  445,  762,    3,  708,
+ /*   880 */   901,  901,  387,  958,  958,  757,  919,  371,  740,  778,
+ /*   890 */   756,  257,  824,  824,  826,  827,   19,  417,  741,  450,
+ /*   900 */    24,  959,  960,   83,   84,  369,  958,  958,  177,  226,
+ /*   910 */    85,  352,  352,  885,  315,  314,  313,  215,  311,   10,
+ /*   920 */    10,  683,  448,  349,  348,  959,  960,  909,  777,  157,
+ /*   930 */   120,  958,  958,  337,  776,  416,  711,  310,  450,  434,
+ /*   940 */   450,  321,  450,  791,  103,  200,  175,  450,  959,  960,
+ /*   950 */   908,  832,  792,  452,  451,    9,    9,  819,   10,   10,
+ /*   960 */    52,   52,   51,   51,  180,  716,  248,   10,   10,  171,
+ /*   970 */   170,  167,  339,  959,  960,  247,  984,  702,  702,  450,
+ /*   980 */   715,  233,  686,  982,  889,  983,  182,  914,  824,  824,
+ /*   990 */   826,  827,   19,  183,  256,  423,  132,  181,  394,   10,
+ /*  1000 */    10,  889,  891,  749,  958,  958,  917,  268,  985,  198,
+ /*  1010 */   985,  349,  348,  425,  415,  299,  817,  832,  326,  825,
+ /*  1020 */   120,  332,  133,  819,  268,   98,   98,   98,   98,   91,
+ /*  1030 */    96,   96,   96,   96,   95,   95,   94,   94,   94,   93,
+ /*  1040 */   351,  157,  810,  371,  382,  359,  959,  960,  358,  268,
+ /*  1050 */   450,  918,  368,  324,  824,  824,  826,  450,  709,  450,
+ /*  1060 */   264,  380,  889,  450,  877,  746,  253,  919,  255,  433,
+ /*  1070 */    36,   36,  234,  450,  234,  120,  269,   37,   37,   12,
+ /*  1080 */    12,  334,  272,   27,   27,  450,  330,  118,  450,  162,
+ /*  1090 */   742,  280,  450,   38,   38,  450,  985,  356,  985,  450,
+ /*  1100 */   709, 1210,  450,  132,  450,   39,   39,  450,   40,   40,
+ /*  1110 */   450,  362,   41,   41,  450,   42,   42,  450,  254,   28,
+ /*  1120 */    28,  450,   29,   29,   31,   31,  450,   43,   43,  450,
+ /*  1130 */    44,   44,  450,  714,   45,   45,  450,   11,   11,  767,
+ /*  1140 */   450,   46,   46,  450,  268,  450,  105,  105,  450,   47,
+ /*  1150 */    47,  450,   48,   48,  450,  237,   33,   33,  450,  172,
+ /*  1160 */    49,   49,  450,   50,   50,   34,   34,  274,  122,  122,
+ /*  1170 */   450,  123,  123,  450,  124,  124,  450,  898,   56,   56,
+ /*  1180 */   450,  897,   35,   35,  450,  267,  450,  817,  450,  817,
+ /*  1190 */   106,  106,  450,   53,   53,  385,  107,  107,  450,  817,
+ /*  1200 */   108,  108,  817,  450,  104,  104,  121,  121,  119,  119,
+ /*  1210 */   450,  117,  112,  112,  450,  276,  450,  225,  111,  111,
+ /*  1220 */   450,  730,  450,  109,  109,  450,  673,  674,  675,  912,
+ /*  1230 */   110,  110,  317,  998,   55,   55,   57,   57,  692,  331,
+ /*  1240 */    54,   54,   26,   26,  696,   30,   30,  317,  937,  197,
+ /*  1250 */   196,  195,  335,  281,  336,  446,  331,  745,  689,  436,
+ /*  1260 */   440,  444,  120,   72,  386,  223,  175,  345,  757,  933,
+ /*  1270 */    20,  286,  319,  756,  815,  372,  374,  202,  202,  202,
+ /*  1280 */   263,  395,  285,   74,  208,   21,  696,  719,  718,  884,
+ /*  1290 */   120,  120,  120,  120,  120,  754,  278,  828,   77,   74,
+ /*  1300 */   726,  727,  785,  783,  880,  202,  999,  208,  894,  893,
+ /*  1310 */   894,  893,  694,  816,  763,  116,  774, 1290,  431,  432,
+ /*  1320 */   302,  999,  390,  303,  823,  697,  691,  680,  159,  289,
+ /*  1330 */   679,  884,  681,  952,  291,  218,  293,    7,  316,  828,
+ /*  1340 */   173,  805,  259,  364,  252,  911,  376,  713,  295,  435,
+ /*  1350 */   308,  168,  955,  993,  135,  400,  990,  284,  882,  881,
+ /*  1360 */   205,  928,  926,   59,  333,   62,  144,  156,  130,   72,
+ /*  1370 */   802,  366,  367,  393,  137,  185,  189,  160,  139,  383,
+ /*  1380 */    67,  896,  140,  141,  142,  148,  389,  812,  775,  266,
+ /*  1390 */   219,  190,  154,  391,  913,  876,  271,  406,  191,  322,
+ /*  1400 */   682,  733,  192,  342,  732,  724,  731,  711,  723,  421,
+ /*  1410 */   705,   71,  323,    6,  204,  771,  288,   79,  297,  346,
+ /*  1420 */   772,  704,  290,  283,  703,  770,  292,  294,  967,  239,
+ /*  1430 */   769,  102,  862,  438,  426,  240,  424,  442,   73,  213,
+ /*  1440 */   688,  238,   22,  453,  953,  214,  217,  216,  454,  677,
+ /*  1450 */   676,  671,  753,  125,  115,  235,  126,  669,  353,  166,
+ /*  1460 */   127,  244,  179,  357,  306,  304,  305,  307,  113,  892,
+ /*  1470 */   327,  890,  811,  328,  134,  128,  136,  138,  743,  258,
+ /*  1480 */   907,  184,  143,  129,  910,  186,   63,   64,  145,  187,
+ /*  1490 */   906,   65,    8,   66,   13,  188,  202,  899,  265,  149,
+ /*  1500 */   987,  388,  150,  685,  161,  392,  285,  193,  279,  396,
+ /*  1510 */   151,  401,   68,   14,   15,  722,   69,  236,  831,  131,
+ /*  1520 */   830,  860,   70,  751,   16,  414,  755,    4,  174,  220,
+ /*  1530 */   222,  784,  201,  152,  779,   77,   74,   17,   18,  875,
+ /*  1540 */   861,  859,  916,  864,  915,  207,  206,  942,  163,  437,
+ /*  1550 */   948,  943,  164,  209, 1002,  441,  863,  165,  210,  829,
+ /*  1560 */   695,   87,  312,  211, 1292, 1291,  309,
 };
 static const YYCODETYPE yy_lookahead[] = {
  /*     0 */    19,   95,   53,   97,   22,   24,   24,  101,   27,   28,
@@ -132073,281 +133326,290 @@
  /*    90 */    29,   30,   31,   32,   33,   34,   35,   36,   37,   38,
  /*   100 */    39,   40,   41,  152,   43,   44,   45,   46,   47,   48,
  /*   110 */    49,   50,   51,   52,   53,  144,  145,  146,  147,   19,
- /*   120 */   137,   22,  139,  172,  173,   52,   53,   27,   28,   29,
+ /*   120 */    16,   22,   92,  172,  173,   52,   53,   27,   28,   29,
  /*   130 */    30,   31,   32,   33,   34,   35,   36,   37,   38,   39,
  /*   140 */    40,   41,   81,   43,   44,   45,   46,   47,   48,   49,
  /*   150 */    50,   51,   52,   53,   55,   56,   19,  152,  207,  208,
  /*   160 */   115,   24,  117,  118,   27,   28,   29,   30,   31,   32,
  /*   170 */    33,   34,   35,   36,   37,   38,   39,   40,   41,   79,
  /*   180 */    43,   44,   45,   46,   47,   48,   49,   50,   51,   52,
- /*   190 */    53,   19,    0,    1,    2,   23,   97,   98,  193,   27,
+ /*   190 */    53,   19,   88,  157,   90,   23,   97,   98,  193,   27,
  /*   200 */    28,   29,   30,   31,   32,   33,   34,   35,   36,   37,
  /*   210 */    38,   39,   40,   41,  152,   43,   44,   45,   46,   47,
- /*   220 */    48,   49,   50,   51,   52,   53,   19,   22,   23,  163,
- /*   230 */    23,   26,  190,  191,   27,   28,   29,   30,   31,   32,
+ /*   220 */    48,   49,   50,   51,   52,   53,   19,   22,   23,  172,
+ /*   230 */    23,   26,  119,  120,   27,   28,   29,   30,   31,   32,
  /*   240 */    33,   34,   35,   36,   37,   38,   39,   40,   41,  187,
  /*   250 */    43,   44,   45,   46,   47,   48,   49,   50,   51,   52,
- /*   260 */    53,   19,  196,   22,   23,   23,   49,   26,   92,   27,
+ /*   260 */    53,   19,   22,   23,  228,   23,   26,  231,  152,   27,
  /*   270 */    28,   29,   30,   31,   32,   33,   34,   35,   36,   37,
  /*   280 */    38,   39,   40,   41,  172,   43,   44,   45,   46,   47,
  /*   290 */    48,   49,   50,   51,   52,   53,   19,  221,  222,  223,
- /*   300 */    23,   96,  119,  120,   27,   28,   29,   30,   31,   32,
- /*   310 */    33,   34,   35,   36,   37,   38,   39,   40,   41,  172,
+ /*   300 */    23,   96,  152,  172,   27,   28,   29,   30,   31,   32,
+ /*   310 */    33,   34,   35,   36,   37,   38,   39,   40,   41,  152,
  /*   320 */    43,   44,   45,   46,   47,   48,   49,   50,   51,   52,
- /*   330 */    53,   19,  152,  116,  221,  222,  223,   96,  121,   27,
+ /*   330 */    53,   19,    0,    1,    2,   23,   96,  190,  191,   27,
  /*   340 */    28,   29,   30,   31,   32,   33,   34,   35,   36,   37,
- /*   350 */    38,   39,   40,   41,  241,   43,   44,   45,   46,   47,
- /*   360 */    48,   49,   50,   51,   52,   53,   19,  157,  168,  169,
- /*   370 */   170,   22,  190,  191,   27,   28,   29,   30,   31,   32,
- /*   380 */    33,   34,   35,   36,   37,   38,   39,   40,   41,   30,
+ /*   350 */    38,   39,   40,   41,  238,   43,   44,   45,   46,   47,
+ /*   360 */    48,   49,   50,   51,   52,   53,   19,  185,  218,  221,
+ /*   370 */   222,  223,  152,  152,   27,   28,   29,   30,   31,   32,
+ /*   380 */    33,   34,   35,   36,   37,   38,   39,   40,   41,  241,
  /*   390 */    43,   44,   45,   46,   47,   48,   49,   50,   51,   52,
- /*   400 */    53,   19,  172,  152,   55,   56,   24,  247,  248,   27,
+ /*   400 */    53,   19,  152,  168,  169,  170,   22,  190,  191,   27,
  /*   410 */    28,   29,   30,   31,   32,   33,   34,   35,   36,   37,
  /*   420 */    38,   39,   40,   41,  152,   43,   44,   45,   46,   47,
- /*   430 */    48,   49,   50,   51,   52,   53,  146,  147,  228,  179,
- /*   440 */   180,  231,  185,   19,  172,  173,   97,   98,  188,   26,
- /*   450 */   138,   27,   28,   29,   30,   31,   32,   33,   34,   35,
- /*   460 */    36,   37,   38,   39,   40,   41,  107,   43,   44,   45,
- /*   470 */    46,   47,   48,   49,   50,   51,   52,   53,   19,  207,
- /*   480 */   208,   30,   31,   32,   33,  138,   27,   28,   29,   30,
+ /*   430 */    48,   49,   50,   51,   52,   53,   19,   19,  218,   55,
+ /*   440 */    56,   24,   22,  152,   27,   28,   29,   30,   31,   32,
+ /*   450 */    33,   34,   35,   36,   37,   38,   39,   40,   41,  152,
+ /*   460 */    43,   44,   45,   46,   47,   48,   49,   50,   51,   52,
+ /*   470 */    53,  250,  194,  195,   56,   55,   56,   55,   19,  172,
+ /*   480 */   173,   97,   98,  152,  206,  138,   27,   28,   29,   30,
  /*   490 */    31,   32,   33,   34,   35,   36,   37,   38,   39,   40,
- /*   500 */    41,  250,   43,   44,   45,   46,   47,   48,   49,   50,
- /*   510 */    51,   52,   53,   19,  168,  169,  170,    7,    8,    9,
- /*   520 */    19,  152,   28,   29,   30,   31,   32,   33,   34,   35,
- /*   530 */    36,   37,   38,   39,   40,   41,  152,   43,   44,   45,
- /*   540 */    46,   47,   48,   49,   50,   51,   52,   53,   19,  108,
- /*   550 */   109,  110,  101,  130,   53,  152,  172,  173,   29,   30,
+ /*   500 */    41,  152,   43,   44,   45,   46,   47,   48,   49,   50,
+ /*   510 */    51,   52,   53,   19,  207,  208,  152,   97,   98,   97,
+ /*   520 */   138,   27,   28,   29,   30,   31,   32,   33,   34,   35,
+ /*   530 */    36,   37,   38,   39,   40,   41,  181,   43,   44,   45,
+ /*   540 */    46,   47,   48,   49,   50,   51,   52,   53,   19,   30,
+ /*   550 */    31,   32,   33,  247,  248,   19,  152,   28,   29,   30,
  /*   560 */    31,   32,   33,   34,   35,   36,   37,   38,   39,   40,
  /*   570 */    41,  152,   43,   44,   45,   46,   47,   48,   49,   50,
- /*   580 */    51,   52,   53,   19,   20,  116,   22,   23,  169,  170,
- /*   590 */   121,  207,   85,   55,   56,   26,   19,   20,  101,   22,
- /*   600 */    99,  100,  101,  102,  103,  104,  105,  152,  152,  112,
- /*   610 */   210,   47,   48,  112,  152,  108,  109,  110,   54,   55,
- /*   620 */    56,  221,  222,  223,   47,   48,  119,  120,  172,  173,
- /*   630 */    66,   54,   55,   56,  152,   97,   98,   99,  148,  149,
- /*   640 */   102,  103,  104,   66,  154,   23,  156,   83,   26,  230,
- /*   650 */   152,  113,  152,  163,  172,  173,   92,   92,   21,   95,
- /*   660 */    83,   97,   98,  207,  208,  101,  152,   98,  186,   92,
- /*   670 */   172,  173,   95,  218,   97,   98,  152,   99,  101,  217,
- /*   680 */   102,  103,  104,  152,  119,  120,  196,   55,   56,   19,
- /*   690 */    20,  113,   22,  124,  163,   11,  132,  133,  134,  135,
- /*   700 */   136,  152,  152,  172,  173,  207,  208,  152,  152,  132,
- /*   710 */   133,  134,  135,  136,  164,  152,   84,   47,   48,   49,
- /*   720 */    98,  181,  152,  152,   54,   55,   56,  196,   91,   97,
- /*   730 */    98,  160,  218,  163,  244,  164,   66,  152,  207,  208,
- /*   740 */   103,  217,  172,  173,   19,   20,  124,   22,  193,   38,
- /*   750 */    39,   40,   41,   83,   43,   44,   45,   46,   47,   48,
- /*   760 */    49,   50,   51,   52,   53,   95,  196,   97,   98,   85,
- /*   770 */   152,  101,   47,   48,  181,   85,   92,  140,  193,   54,
- /*   780 */    55,   56,   92,   49,  195,   55,   56,  175,  163,   55,
- /*   790 */    56,   66,  108,  109,  110,  206,  163,  242,  108,  109,
- /*   800 */   110,  175,  132,  133,  134,  135,  136,  152,   83,   43,
- /*   810 */    44,   45,   46,   47,   48,   49,   50,   51,   52,   53,
- /*   820 */    95,  196,   97,   98,   55,   56,  101,   97,   98,  196,
- /*   830 */   152,   97,   98,  221,  222,  223,  211,  212,   22,   23,
- /*   840 */    19,   20,  181,   22,   19,  152,  152,  221,  222,  223,
- /*   850 */   172,  173,  219,   19,  124,   30,  238,  132,  133,  134,
- /*   860 */   135,  136,  169,  170,  186,  232,   97,   98,   47,   48,
- /*   870 */   237,  152,  217,  152,    5,   54,   55,   56,  152,   10,
- /*   880 */    11,   12,   13,   14,   47,   48,   17,   66,   47,   48,
- /*   890 */    56,  172,  173,  124,  194,  195,   55,   56,  172,  173,
- /*   900 */   152,  152,   22,  152,   83,  186,  206,  108,  109,  110,
- /*   910 */    22,   23,   96,  152,  193,   12,   95,  152,   97,   98,
- /*   920 */   172,  173,  101,  230,  152,  164,   12,   47,   48,   60,
- /*   930 */   152,   62,  107,  207,  186,   55,   56,  112,   97,   98,
- /*   940 */    71,  100,  193,  152,  183,  152,  185,  152,  107,  152,
- /*   950 */   109,   82,   16,  132,  133,  134,  135,  136,   89,  152,
- /*   960 */    57,   92,   93,  172,  173,  172,  173,  172,  173,  132,
- /*   970 */   133,   57,  152,  132,  133,   95,   73,   97,   75,   55,
- /*   980 */    56,  101,  163,  114,   96,  245,  246,   73,   85,   75,
- /*   990 */    38,   39,   40,   41,   42,   43,   44,   45,   46,   47,
- /*  1000 */    48,   49,   50,   51,   52,   53,  194,  195,  152,  171,
- /*  1010 */   141,  152,  132,  133,  134,  196,  225,  179,  206,   65,
- /*  1020 */   152,   97,   98,  152,   88,  152,   90,  152,  172,  173,
- /*  1030 */   152,  219,   78,  152,  152,  238,  152,  152,  219,  152,
- /*  1040 */    86,  152,  152,  172,  173,  238,  152,  172,  173,  152,
- /*  1050 */   172,  173,  152,  172,  173,  213,  237,  172,  173,  172,
- /*  1060 */   173,  172,  173,  211,  212,  111,  172,  173,  152,  172,
- /*  1070 */   173,  152,  172,  173,  152,  193,  140,  193,  152,   59,
- /*  1080 */   152,  152,  152,   63,  152,   16,  152,  152,  172,  173,
- /*  1090 */   152,  172,  173,  152,  172,  173,  152,   77,  172,  173,
- /*  1100 */   172,  173,  172,  173,  172,  173,  172,  173,  152,  250,
- /*  1110 */   172,  173,   61,  172,  173,  152,  172,  173,  152,   92,
- /*  1120 */   152,   70,  152,  152,  152,   26,  152,  100,  172,  173,
- /*  1130 */   152,   24,  152,   22,  152,  172,  173,  152,  172,  173,
- /*  1140 */   172,  173,  172,  173,  172,  173,  172,  173,  152,  152,
- /*  1150 */   172,  173,  172,  173,  172,  173,  152,   88,  152,   90,
- /*  1160 */   152,   55,   55,  152,  193,  152,   55,  152,  172,  173,
- /*  1170 */    26,  152,  163,  163,  152,   19,  172,  173,  172,  173,
- /*  1180 */   172,  173,   22,  172,  173,  172,  173,  172,  173,   55,
- /*  1190 */   193,  172,  173,  152,  172,  173,  166,  167,  166,  167,
- /*  1200 */   163,  163,  163,   97,   97,  196,  196,  163,   97,   55,
- /*  1210 */    23,  199,   56,   26,   22,   22,   24,  100,  101,   55,
- /*  1220 */    23,  209,  123,   26,   23,   23,   23,   26,   26,   26,
- /*  1230 */    37,   97,  152,  196,  196,  196,   23,    7,    8,   26,
- /*  1240 */   196,   23,   23,  152,   26,   26,   23,  132,  133,   26,
- /*  1250 */   106,   97,  132,  133,   23,  152,  152,   26,  210,  191,
- /*  1260 */   152,   97,  152,  234,  152,  152,  152,  233,  152,  210,
- /*  1270 */   152,  152,  210,  152,  152,  152,  152,  152,  152,  197,
- /*  1280 */   210,  198,  122,  150,  239,  201,  214,  214,  201,  239,
- /*  1290 */   214,  227,  200,  184,  198,  155,   67,  243,  122,   22,
- /*  1300 */   159,  159,   69,  176,  175,  175,  175,  240,  180,  159,
- /*  1310 */   220,  240,   27,  130,   18,   18,  159,  158,  220,  137,
- /*  1320 */   159,  189,  236,  158,   74,  159,  159,  158,  192,  192,
- /*  1330 */   192,  192,  235,   22,  189,  189,  201,  159,  158,  177,
- /*  1340 */   159,  107,  158,   76,  201,  177,  174,  174,  201,  174,
- /*  1350 */   106,  177,  182,  174,  107,  159,   22,  125,  159,  182,
- /*  1360 */   174,  176,  174,  174,  216,  216,  215,  215,  177,  216,
- /*  1370 */   215,   53,  137,  128,  216,  177,  127,  129,  215,  126,
- /*  1380 */    25,   13,  162,   26,    6,  161,  165,  165,  178,  153,
- /*  1390 */   153,  151,  151,  151,  151,  224,    4,    3,   22,  142,
- /*  1400 */    15,   94,   16,  178,  165,  205,   23,  202,  204,  203,
- /*  1410 */   201,   23,  120,  131,  111,   20,  226,  123,  125,   16,
- /*  1420 */     1,  123,  131,  229,  229,  111,   37,   37,   56,   64,
- /*  1430 */   122,    1,    5,   22,  107,  140,   80,   87,   26,   80,
- /*  1440 */   107,   72,   24,   20,   19,  105,   22,  112,   22,   79,
- /*  1450 */    22,   58,   23,   22,   79,   22,  249,  249,  246,   79,
- /*  1460 */    23,   23,   23,  116,   68,   22,   26,   23,   22,   56,
- /*  1470 */   122,   23,   23,   64,   22,  124,   26,   26,   64,   64,
- /*  1480 */    23,   23,   23,   23,   11,   23,   22,   26,   23,   22,
- /*  1490 */    24,    1,   23,   22,   26,  122,   24,   23,   22,  122,
- /*  1500 */    23,   23,   22,  122,  122,   23,   15,
+ /*   580 */    51,   52,   53,   19,  168,  169,  170,  238,   19,   53,
+ /*   590 */   152,  172,  173,   29,   30,   31,   32,   33,   34,   35,
+ /*   600 */    36,   37,   38,   39,   40,   41,  152,   43,   44,   45,
+ /*   610 */    46,   47,   48,   49,   50,   51,   52,   53,   19,   20,
+ /*   620 */   101,   22,   23,  169,  170,   56,  207,   85,   55,   56,
+ /*   630 */    23,   19,   20,   26,   22,   99,  100,  101,  102,  103,
+ /*   640 */   104,  105,  238,  152,  152,  210,   47,   48,  112,  152,
+ /*   650 */   108,  109,  110,   54,   55,   56,  221,  222,  223,   47,
+ /*   660 */    48,  119,  120,  172,  173,   66,   54,   55,   56,  152,
+ /*   670 */    97,   98,   99,  148,  149,  102,  103,  104,   66,  154,
+ /*   680 */    23,  156,   83,   26,  230,  152,  113,  152,  163,  194,
+ /*   690 */   195,   92,   92,   30,   95,   83,   97,   98,  207,  208,
+ /*   700 */   101,  206,  179,  180,   92,  172,  173,   95,  152,   97,
+ /*   710 */    98,  188,   99,  101,  219,  102,  103,  104,  152,  119,
+ /*   720 */   120,  196,   55,   56,   19,   20,  113,   22,  193,  163,
+ /*   730 */    11,  132,  133,  134,  135,  136,   24,   65,  172,  173,
+ /*   740 */   207,  208,  250,  152,  132,  133,  134,  135,  136,  193,
+ /*   750 */    78,   84,   47,   48,   49,   98,  199,  152,   86,   54,
+ /*   760 */    55,   56,  196,  152,   97,   98,  209,   55,  163,  244,
+ /*   770 */   107,   66,  152,  207,  208,  164,  175,  172,  173,   19,
+ /*   780 */    20,  124,   22,  111,   38,   39,   40,   41,   83,   43,
+ /*   790 */    44,   45,   46,   47,   48,   49,   50,   51,   52,   53,
+ /*   800 */    95,  196,   97,   98,   85,  152,  101,   47,   48,   97,
+ /*   810 */    85,   92,  207,  193,   54,   55,   56,   92,   49,  175,
+ /*   820 */    55,   56,  221,  222,  223,   12,   66,  108,  109,  110,
+ /*   830 */   137,  163,  139,  108,  109,  110,   26,  132,  133,  134,
+ /*   840 */   135,  136,  152,   83,   43,   44,   45,   46,   47,   48,
+ /*   850 */    49,   50,   51,   52,   53,   95,   26,   97,   98,   55,
+ /*   860 */    56,  101,   97,   98,  196,  221,  222,  223,  146,  147,
+ /*   870 */    57,  171,  152,   22,   26,   19,   20,   49,   22,  179,
+ /*   880 */   108,  109,  110,   55,   56,  116,   73,  219,   75,  124,
+ /*   890 */   121,  152,  132,  133,  134,  135,  136,  163,   85,  152,
+ /*   900 */   232,   97,   98,   47,   48,  237,   55,   56,   98,    5,
+ /*   910 */    54,   55,   56,  193,   10,   11,   12,   13,   14,  172,
+ /*   920 */   173,   17,   66,   47,   48,   97,   98,  152,  124,  152,
+ /*   930 */   196,   55,   56,  186,  124,  152,  106,  160,  152,   83,
+ /*   940 */   152,  164,  152,   61,   22,  211,  212,  152,   97,   98,
+ /*   950 */   152,   95,   70,   97,   98,  172,  173,  101,  172,  173,
+ /*   960 */   172,  173,  172,  173,   60,  181,   62,  172,  173,   47,
+ /*   970 */    48,  123,  186,   97,   98,   71,  100,   55,   56,  152,
+ /*   980 */   181,  186,   21,  107,  152,  109,   82,  163,  132,  133,
+ /*   990 */   134,  135,  136,   89,   16,  207,   92,   93,   19,  172,
+ /*  1000 */   173,  169,  170,  195,   55,   56,   12,  152,  132,   30,
+ /*  1010 */   134,   47,   48,  186,  206,  225,  152,   95,  114,   97,
+ /*  1020 */   196,  245,  246,  101,  152,   38,   39,   40,   41,   42,
+ /*  1030 */    43,   44,   45,   46,   47,   48,   49,   50,   51,   52,
+ /*  1040 */    53,  152,  163,  219,  152,  141,   97,   98,  193,  152,
+ /*  1050 */   152,   57,   91,  164,  132,  133,  134,  152,   55,  152,
+ /*  1060 */   152,  237,  230,  152,  103,  193,   88,   73,   90,   75,
+ /*  1070 */   172,  173,  183,  152,  185,  196,  152,  172,  173,  172,
+ /*  1080 */   173,  217,  152,  172,  173,  152,  107,   22,  152,   24,
+ /*  1090 */   193,  112,  152,  172,  173,  152,  132,  242,  134,  152,
+ /*  1100 */    97,  140,  152,   92,  152,  172,  173,  152,  172,  173,
+ /*  1110 */   152,  100,  172,  173,  152,  172,  173,  152,  140,  172,
+ /*  1120 */   173,  152,  172,  173,  172,  173,  152,  172,  173,  152,
+ /*  1130 */   172,  173,  152,  152,  172,  173,  152,  172,  173,  213,
+ /*  1140 */   152,  172,  173,  152,  152,  152,  172,  173,  152,  172,
+ /*  1150 */   173,  152,  172,  173,  152,  210,  172,  173,  152,   26,
+ /*  1160 */   172,  173,  152,  172,  173,  172,  173,  152,  172,  173,
+ /*  1170 */   152,  172,  173,  152,  172,  173,  152,   59,  172,  173,
+ /*  1180 */   152,   63,  172,  173,  152,  193,  152,  152,  152,  152,
+ /*  1190 */   172,  173,  152,  172,  173,   77,  172,  173,  152,  152,
+ /*  1200 */   172,  173,  152,  152,  172,  173,  172,  173,  172,  173,
+ /*  1210 */   152,   22,  172,  173,  152,  152,  152,   22,  172,  173,
+ /*  1220 */   152,  152,  152,  172,  173,  152,    7,    8,    9,  163,
+ /*  1230 */   172,  173,   22,   23,  172,  173,  172,  173,  166,  167,
+ /*  1240 */   172,  173,  172,  173,   55,  172,  173,   22,   23,  108,
+ /*  1250 */   109,  110,  217,  152,  217,  166,  167,  163,  163,  163,
+ /*  1260 */   163,  163,  196,  130,  217,  211,  212,  217,  116,   23,
+ /*  1270 */    22,  101,   26,  121,   23,   23,   23,   26,   26,   26,
+ /*  1280 */    23,   23,  112,   26,   26,   37,   97,  100,  101,   55,
+ /*  1290 */   196,  196,  196,  196,  196,   23,   23,   55,   26,   26,
+ /*  1300 */     7,    8,   23,  152,   23,   26,   96,   26,  132,  132,
+ /*  1310 */   134,  134,   23,  152,  152,   26,  152,  122,  152,  191,
+ /*  1320 */   152,   96,  234,  152,  152,  152,  152,  152,  197,  210,
+ /*  1330 */   152,   97,  152,  152,  210,  233,  210,  198,  150,   97,
+ /*  1340 */   184,  201,  239,  214,  214,  201,  239,  180,  214,  227,
+ /*  1350 */   200,  198,  155,   67,  243,  176,   69,  175,  175,  175,
+ /*  1360 */   122,  159,  159,  240,  159,  240,   22,  220,   27,  130,
+ /*  1370 */   201,   18,  159,   18,  189,  158,  158,  220,  192,  159,
+ /*  1380 */   137,  236,  192,  192,  192,  189,   74,  189,  159,  235,
+ /*  1390 */   159,  158,   22,  177,  201,  201,  159,  107,  158,  177,
+ /*  1400 */   159,  174,  158,   76,  174,  182,  174,  106,  182,  125,
+ /*  1410 */   174,  107,  177,   22,  159,  216,  215,  137,  159,   53,
+ /*  1420 */   216,  176,  215,  174,  174,  216,  215,  215,  174,  229,
+ /*  1430 */   216,  129,  224,  177,  126,  229,  127,  177,  128,   25,
+ /*  1440 */   162,  226,   26,  161,   13,  153,    6,  153,  151,  151,
+ /*  1450 */   151,  151,  205,  165,  178,  178,  165,    4,    3,   22,
+ /*  1460 */   165,  142,   15,   94,  202,  204,  203,  201,   16,   23,
+ /*  1470 */   249,   23,  120,  249,  246,  111,  131,  123,   20,   16,
+ /*  1480 */     1,  125,  123,  111,   56,   64,   37,   37,  131,  122,
+ /*  1490 */     1,   37,    5,   37,   22,  107,   26,   80,  140,   80,
+ /*  1500 */    87,   72,  107,   20,   24,   19,  112,  105,   23,   79,
+ /*  1510 */    22,   79,   22,   22,   22,   58,   22,   79,   23,   68,
+ /*  1520 */    23,   23,   26,  116,   22,   26,   23,   22,  122,   23,
+ /*  1530 */    23,   56,   64,   22,  124,   26,   26,   64,   64,   23,
+ /*  1540 */    23,   23,   23,   11,   23,   22,   26,   23,   22,   24,
+ /*  1550 */     1,   23,   22,   26,  251,   24,   23,   22,  122,   23,
+ /*  1560 */    23,   22,   15,  122,  122,  122,   23,
 };
-#define YY_SHIFT_USE_DFLT (-95)
-#define YY_SHIFT_COUNT (442)
-#define YY_SHIFT_MIN   (-94)
-#define YY_SHIFT_MAX   (1491)
+#define YY_SHIFT_USE_DFLT (1567)
+#define YY_SHIFT_COUNT    (455)
+#define YY_SHIFT_MIN      (-94)
+#define YY_SHIFT_MAX      (1549)
 static const short yy_shift_ofst[] = {
- /*     0 */    40,  564,  869,  577,  725,  725,  725,  725,  690,  -19,
- /*    10 */    16,   16,  100,  725,  725,  725,  725,  725,  725,  725,
- /*    20 */   841,  841,  538,  507,  684,  565,   61,  137,  172,  207,
- /*    30 */   242,  277,  312,  347,  382,  424,  424,  424,  424,  424,
- /*    40 */   424,  424,  424,  424,  424,  424,  424,  424,  424,  424,
- /*    50 */   459,  424,  494,  529,  529,  670,  725,  725,  725,  725,
- /*    60 */   725,  725,  725,  725,  725,  725,  725,  725,  725,  725,
- /*    70 */   725,  725,  725,  725,  725,  725,  725,  725,  725,  725,
- /*    80 */   725,  725,  725,  725,  821,  725,  725,  725,  725,  725,
- /*    90 */   725,  725,  725,  725,  725,  725,  725,  725,  952,  711,
- /*   100 */   711,  711,  711,  711,  766,   23,   32,  924,  637,  825,
- /*   110 */   837,  837,  924,   73,  183,  -51,  -95,  -95,  -95,  501,
- /*   120 */   501,  501,  903,  903,  632,  205,  241,  924,  924,  924,
- /*   130 */   924,  924,  924,  924,  924,  924,  924,  924,  924,  924,
- /*   140 */   924,  924,  924,  924,  924,  924,  924,  192, 1027, 1106,
- /*   150 */  1106,  183,  176,  176,  176,  176,  176,  176,  -95,  -95,
- /*   160 */   -95,  880,  -94,  -94,  578,  734,   99,  730,  769,  349,
- /*   170 */   924,  924,  924,  924,  924,  924,  924,  924,  924,  924,
- /*   180 */   924,  924,  924,  924,  924,  924,  924,  954,  954,  954,
- /*   190 */   924,  924,  622,  924,  924,  924,  -18,  924,  924,  914,
- /*   200 */   924,  924,  924,  924,  924,  924,  924,  924,  924,  924,
- /*   210 */   441, 1020, 1107, 1107, 1107,  569,   45,  217,  510,  423,
- /*   220 */   834,  834, 1156,  423, 1156, 1144, 1187,  359, 1051,  834,
- /*   230 */   -17, 1051, 1051, 1099,  469, 1192, 1229, 1176, 1176, 1233,
- /*   240 */  1233, 1176, 1277, 1285, 1183, 1296, 1296, 1296, 1296, 1176,
- /*   250 */  1297, 1183, 1277, 1285, 1285, 1183, 1176, 1297, 1182, 1250,
- /*   260 */  1176, 1176, 1297, 1311, 1176, 1297, 1176, 1297, 1311, 1234,
- /*   270 */  1234, 1234, 1267, 1311, 1234, 1244, 1234, 1267, 1234, 1234,
- /*   280 */  1232, 1247, 1232, 1247, 1232, 1247, 1232, 1247, 1176, 1334,
- /*   290 */  1176, 1235, 1311, 1318, 1318, 1311, 1248, 1253, 1245, 1249,
- /*   300 */  1183, 1355, 1357, 1368, 1368, 1378, 1378, 1378, 1378,  -95,
- /*   310 */   -95,  -95,  -95,  -95,  -95,  -95,  -95,  451,  936,  816,
- /*   320 */   888, 1069,  799, 1111, 1197, 1193, 1201, 1202, 1203, 1213,
- /*   330 */  1134, 1117, 1230,  497, 1218, 1219, 1154, 1223, 1115, 1120,
- /*   340 */  1231, 1164, 1160, 1392, 1394, 1376, 1257, 1385, 1307, 1386,
- /*   350 */  1383, 1388, 1292, 1282, 1303, 1294, 1395, 1293, 1403, 1419,
- /*   360 */  1298, 1291, 1389, 1390, 1314, 1372, 1365, 1308, 1430, 1427,
- /*   370 */  1411, 1327, 1295, 1356, 1412, 1359, 1350, 1369, 1333, 1418,
- /*   380 */  1423, 1425, 1335, 1340, 1424, 1370, 1426, 1428, 1429, 1431,
- /*   390 */  1375, 1393, 1433, 1380, 1396, 1437, 1438, 1439, 1347, 1443,
- /*   400 */  1444, 1446, 1440, 1348, 1448, 1449, 1413, 1409, 1452, 1351,
- /*   410 */  1450, 1414, 1451, 1415, 1457, 1450, 1458, 1459, 1460, 1461,
- /*   420 */  1462, 1464, 1473, 1465, 1467, 1466, 1468, 1469, 1471, 1472,
- /*   430 */  1468, 1474, 1476, 1477, 1478, 1480, 1373, 1377, 1381, 1382,
- /*   440 */  1482, 1491, 1490,
+ /*     0 */    40,  599,  904,  612,  760,  760,  760,  760,  725,  -19,
+ /*    10 */    16,   16,  100,  760,  760,  760,  760,  760,  760,  760,
+ /*    20 */   876,  876,  573,  542,  719,  600,   61,  137,  172,  207,
+ /*    30 */   242,  277,  312,  347,  382,  417,  459,  459,  459,  459,
+ /*    40 */   459,  459,  459,  459,  459,  459,  459,  459,  459,  459,
+ /*    50 */   459,  459,  459,  494,  459,  529,  564,  564,  705,  760,
+ /*    60 */   760,  760,  760,  760,  760,  760,  760,  760,  760,  760,
+ /*    70 */   760,  760,  760,  760,  760,  760,  760,  760,  760,  760,
+ /*    80 */   760,  760,  760,  760,  760,  760,  760,  760,  760,  760,
+ /*    90 */   856,  760,  760,  760,  760,  760,  760,  760,  760,  760,
+ /*   100 */   760,  760,  760,  760,  987,  746,  746,  746,  746,  746,
+ /*   110 */   801,   23,   32,  949,  961,  979,  964,  964,  949,   73,
+ /*   120 */   113,  -51, 1567, 1567, 1567,  536,  536,  536,   99,   99,
+ /*   130 */   813,  813,  667,  205,  240,  949,  949,  949,  949,  949,
+ /*   140 */   949,  949,  949,  949,  949,  949,  949,  949,  949,  949,
+ /*   150 */   949,  949,  949,  949,  949,  332, 1011,  422,  422,  113,
+ /*   160 */    30,   30,   30,   30,   30,   30, 1567, 1567, 1567,  922,
+ /*   170 */   -94,  -94,  384,  613,  828,  420,  765,  804,  851,  949,
+ /*   180 */   949,  949,  949,  949,  949,  949,  949,  949,  949,  949,
+ /*   190 */   949,  949,  949,  949,  949,  672,  672,  672,  949,  949,
+ /*   200 */   657,  949,  949,  949,  -18,  949,  949,  994,  949,  949,
+ /*   210 */   949,  949,  949,  949,  949,  949,  949,  949,  772, 1118,
+ /*   220 */   712,  712,  712,  810,   45,  769, 1219, 1133,  418,  418,
+ /*   230 */   569, 1133,  569,  830,  607,  663,  882,  418,  693,  882,
+ /*   240 */   882,  848, 1152, 1065, 1286, 1238, 1238, 1287, 1287, 1238,
+ /*   250 */  1344, 1341, 1239, 1353, 1353, 1353, 1353, 1238, 1355, 1239,
+ /*   260 */  1344, 1341, 1341, 1239, 1238, 1355, 1243, 1312, 1238, 1238,
+ /*   270 */  1355, 1370, 1238, 1355, 1238, 1355, 1370, 1290, 1290, 1290,
+ /*   280 */  1327, 1370, 1290, 1301, 1290, 1327, 1290, 1290, 1284, 1304,
+ /*   290 */  1284, 1304, 1284, 1304, 1284, 1304, 1238, 1391, 1238, 1280,
+ /*   300 */  1370, 1366, 1366, 1370, 1302, 1308, 1310, 1309, 1239, 1414,
+ /*   310 */  1416, 1431, 1431, 1440, 1440, 1440, 1440, 1567, 1567, 1567,
+ /*   320 */  1567, 1567, 1567, 1567, 1567,  519,  978, 1210, 1225,  104,
+ /*   330 */  1141, 1189, 1246, 1248, 1251, 1252, 1253, 1257, 1258, 1273,
+ /*   340 */  1003, 1187, 1293, 1170, 1272, 1279, 1234, 1281, 1176, 1177,
+ /*   350 */  1289, 1242, 1195, 1453, 1455, 1437, 1319, 1447, 1369, 1452,
+ /*   360 */  1446, 1448, 1352, 1345, 1364, 1354, 1458, 1356, 1463, 1479,
+ /*   370 */  1359, 1357, 1449, 1450, 1454, 1456, 1372, 1428, 1421, 1367,
+ /*   380 */  1489, 1487, 1472, 1388, 1358, 1417, 1470, 1419, 1413, 1429,
+ /*   390 */  1395, 1480, 1483, 1486, 1394, 1402, 1488, 1430, 1490, 1491,
+ /*   400 */  1485, 1492, 1432, 1457, 1494, 1438, 1451, 1495, 1497, 1498,
+ /*   410 */  1496, 1407, 1502, 1503, 1505, 1499, 1406, 1506, 1507, 1475,
+ /*   420 */  1468, 1511, 1410, 1509, 1473, 1510, 1474, 1516, 1509, 1517,
+ /*   430 */  1518, 1519, 1520, 1521, 1523, 1532, 1524, 1526, 1525, 1527,
+ /*   440 */  1528, 1530, 1531, 1527, 1533, 1535, 1536, 1537, 1539, 1436,
+ /*   450 */  1441, 1442, 1443, 1543, 1547, 1549,
 };
 #define YY_REDUCE_USE_DFLT (-130)
-#define YY_REDUCE_COUNT (316)
+#define YY_REDUCE_COUNT (324)
 #define YY_REDUCE_MIN   (-129)
-#define YY_REDUCE_MAX   (1243)
+#define YY_REDUCE_MAX   (1300)
 static const short yy_reduce_ofst[] = {
- /*     0 */   -29,  531,  490,  570,  -49,  272,  456,  498,  633,  400,
- /*    10 */   612,  626,  113,  482,  678,  719,  384,  726,  748,  791,
- /*    20 */   419,  693,  761,  812,  819,  625,   76,   76,   76,   76,
+ /*     0 */   -29,  566,  525,  605,  -49,  307,  491,  533,  668,  435,
+ /*    10 */   601,  644,  148,  747,  786,  795,  419,  788,  827,  790,
+ /*    20 */   454,  832,  889,  495,  824,  734,   76,   76,   76,   76,
  /*    30 */    76,   76,   76,   76,   76,   76,   76,   76,   76,   76,
  /*    40 */    76,   76,   76,   76,   76,   76,   76,   76,   76,   76,
- /*    50 */    76,   76,   76,   76,   76,  793,  795,  856,  871,  875,
- /*    60 */   878,  881,  885,  887,  889,  894,  897,  900,  916,  919,
- /*    70 */   922,  926,  928,  930,  932,  934,  938,  941,  944,  956,
- /*    80 */   963,  966,  968,  970,  972,  974,  978,  980,  982,  996,
- /*    90 */  1004, 1006, 1008, 1011, 1013, 1015, 1019, 1022,   76,   76,
- /*   100 */    76,   76,   76,   76,   76,   76,   76,  555,  210,  260,
- /*   110 */   200,  346,  571,   76,  700,   76,   76,   76,   76,  838,
- /*   120 */   838,  838,   42,  182,  251,  160,  160,  550,    5,  455,
- /*   130 */   585,  721,  749,  882,  884,  971,  618,  462,  797,  514,
- /*   140 */   807,  524,  997, -129,  655,  859,   62,  290,   66, 1030,
- /*   150 */  1032,  589, 1009, 1010, 1037, 1038, 1039, 1044,  740,  852,
- /*   160 */  1012,  112,  147,  230,  257,  180,  369,  403,  500,  549,
- /*   170 */   556,  563,  694,  751,  765,  772,  778,  820,  868,  873,
- /*   180 */   890,  929,  935,  985, 1041, 1080, 1091,  540,  593,  661,
- /*   190 */  1103, 1104,  842, 1108, 1110, 1112, 1048, 1113, 1114, 1068,
- /*   200 */  1116, 1118, 1119,  180, 1121, 1122, 1123, 1124, 1125, 1126,
- /*   210 */  1029, 1034, 1059, 1062, 1070,  842, 1082, 1083, 1133, 1084,
- /*   220 */  1072, 1073, 1045, 1087, 1050, 1127, 1109, 1128, 1129, 1076,
- /*   230 */  1064, 1130, 1131, 1092, 1096, 1140, 1054, 1141, 1142, 1067,
- /*   240 */  1071, 1150, 1090, 1132, 1135, 1136, 1137, 1138, 1139, 1157,
- /*   250 */  1159, 1143, 1098, 1145, 1146, 1147, 1161, 1165, 1086, 1097,
- /*   260 */  1166, 1167, 1169, 1162, 1178, 1180, 1181, 1184, 1168, 1172,
- /*   270 */  1173, 1175, 1170, 1174, 1179, 1185, 1186, 1177, 1188, 1189,
- /*   280 */  1148, 1151, 1149, 1152, 1153, 1155, 1158, 1163, 1196, 1171,
- /*   290 */  1199, 1190, 1191, 1194, 1195, 1198, 1200, 1204, 1206, 1205,
- /*   300 */  1209, 1220, 1224, 1236, 1237, 1240, 1241, 1242, 1243, 1207,
- /*   310 */  1208, 1212, 1221, 1222, 1210, 1225, 1239,
+ /*    50 */    76,   76,   76,   76,   76,   76,   76,   76,  783,  898,
+ /*    60 */   905,  907,  911,  921,  933,  936,  940,  943,  947,  950,
+ /*    70 */   952,  955,  958,  962,  965,  969,  974,  977,  980,  984,
+ /*    80 */   988,  991,  993,  996,  999, 1002, 1006, 1010, 1018, 1021,
+ /*    90 */  1024, 1028, 1032, 1034, 1036, 1040, 1046, 1051, 1058, 1062,
+ /*   100 */  1064, 1068, 1070, 1073,   76,   76,   76,   76,   76,   76,
+ /*   110 */    76,   76,   76,  855,   36,  523,  235,  416,  777,   76,
+ /*   120 */   278,   76,   76,   76,   76,  700,  700,  700,  150,  220,
+ /*   130 */   147,  217,  221,  306,  306,  611,    5,  535,  556,  620,
+ /*   140 */   720,  872,  897,  116,  864,  349, 1035, 1037,  404, 1047,
+ /*   150 */   992, -129, 1050,  492,   62,  722,  879, 1072, 1089,  808,
+ /*   160 */  1066, 1094, 1095, 1096, 1097, 1098,  776, 1054,  557,   57,
+ /*   170 */   112,  131,  167,  182,  250,  272,  291,  331,  364,  438,
+ /*   180 */   497,  517,  591,  653,  690,  739,  775,  798,  892,  908,
+ /*   190 */   924,  930, 1015, 1063, 1069,  355,  784,  799,  981, 1101,
+ /*   200 */   926, 1151, 1161, 1162,  945, 1164, 1166, 1128, 1168, 1171,
+ /*   210 */  1172,  250, 1173, 1174, 1175, 1178, 1180, 1181, 1088, 1102,
+ /*   220 */  1119, 1124, 1126,  926, 1131, 1139, 1188, 1140, 1129, 1130,
+ /*   230 */  1103, 1144, 1107, 1179, 1156, 1167, 1182, 1134, 1122, 1183,
+ /*   240 */  1184, 1150, 1153, 1197, 1111, 1202, 1203, 1123, 1125, 1205,
+ /*   250 */  1147, 1185, 1169, 1186, 1190, 1191, 1192, 1213, 1217, 1193,
+ /*   260 */  1157, 1196, 1198, 1194, 1220, 1218, 1145, 1154, 1229, 1231,
+ /*   270 */  1233, 1216, 1237, 1240, 1241, 1244, 1222, 1227, 1230, 1232,
+ /*   280 */  1223, 1235, 1236, 1245, 1249, 1226, 1250, 1254, 1199, 1201,
+ /*   290 */  1204, 1207, 1209, 1211, 1214, 1212, 1255, 1208, 1259, 1215,
+ /*   300 */  1256, 1200, 1206, 1260, 1247, 1261, 1263, 1262, 1266, 1278,
+ /*   310 */  1282, 1292, 1294, 1297, 1298, 1299, 1300, 1221, 1224, 1228,
+ /*   320 */  1288, 1291, 1276, 1277, 1295,
 };
 static const YYACTIONTYPE yy_default[] = {
- /*     0 */  1258, 1248, 1248, 1248, 1180, 1180, 1180, 1180, 1248, 1077,
- /*    10 */  1106, 1106, 1232, 1309, 1309, 1309, 1309, 1309, 1309, 1179,
- /*    20 */  1309, 1309, 1309, 1309, 1248, 1081, 1112, 1309, 1309, 1309,
- /*    30 */  1309, 1309, 1309, 1309, 1309, 1231, 1233, 1120, 1119, 1214,
- /*    40 */  1093, 1117, 1110, 1114, 1181, 1175, 1176, 1174, 1178, 1182,
- /*    50 */  1309, 1113, 1144, 1159, 1143, 1309, 1309, 1309, 1309, 1309,
- /*    60 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*    70 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*    80 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*    90 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1153, 1158,
- /*   100 */  1165, 1157, 1154, 1146, 1145, 1147, 1148, 1309, 1000, 1048,
- /*   110 */  1309, 1309, 1309, 1149, 1309, 1150, 1162, 1161, 1160, 1239,
- /*   120 */  1266, 1265, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   130 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   140 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1258, 1248, 1006,
- /*   150 */  1006, 1309, 1248, 1248, 1248, 1248, 1248, 1248, 1244, 1081,
- /*   160 */  1072, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   170 */  1309, 1236, 1234, 1309, 1195, 1309, 1309, 1309, 1309, 1309,
- /*   180 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   190 */  1309, 1309, 1309, 1309, 1309, 1309, 1077, 1309, 1309, 1309,
- /*   200 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1260,
- /*   210 */  1309, 1209, 1077, 1077, 1077, 1079, 1061, 1071,  985, 1116,
- /*   220 */  1095, 1095, 1298, 1116, 1298, 1023, 1280, 1020, 1106, 1095,
- /*   230 */  1177, 1106, 1106, 1078, 1071, 1309, 1301, 1086, 1086, 1300,
- /*   240 */  1300, 1086, 1125, 1051, 1116, 1057, 1057, 1057, 1057, 1086,
- /*   250 */   997, 1116, 1125, 1051, 1051, 1116, 1086,  997, 1213, 1295,
- /*   260 */  1086, 1086,  997, 1188, 1086,  997, 1086,  997, 1188, 1049,
- /*   270 */  1049, 1049, 1038, 1188, 1049, 1023, 1049, 1038, 1049, 1049,
- /*   280 */  1099, 1094, 1099, 1094, 1099, 1094, 1099, 1094, 1086, 1183,
- /*   290 */  1086, 1309, 1188, 1192, 1192, 1188, 1111, 1100, 1109, 1107,
- /*   300 */  1116, 1003, 1041, 1263, 1263, 1259, 1259, 1259, 1259, 1306,
- /*   310 */  1306, 1244, 1275, 1275, 1025, 1025, 1275, 1309, 1309, 1309,
- /*   320 */  1309, 1309, 1309, 1270, 1309, 1197, 1309, 1309, 1309, 1309,
- /*   330 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   340 */  1309, 1309, 1131, 1309,  981, 1241, 1309, 1309, 1240, 1309,
- /*   350 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   360 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1297, 1309, 1309,
- /*   370 */  1309, 1309, 1309, 1309, 1212, 1211, 1309, 1309, 1309, 1309,
- /*   380 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   390 */  1309, 1309, 1309, 1309, 1309, 1309, 1309, 1309, 1063, 1309,
- /*   400 */  1309, 1309, 1284, 1309, 1309, 1309, 1309, 1309, 1309, 1309,
- /*   410 */  1108, 1309, 1101, 1309, 1309, 1288, 1309, 1309, 1309, 1309,
- /*   420 */  1309, 1309, 1309, 1309, 1309, 1309, 1250, 1309, 1309, 1309,
- /*   430 */  1249, 1309, 1309, 1309, 1309, 1309, 1133, 1309, 1132, 1136,
- /*   440 */  1309,  991, 1309,
+ /*     0 */  1281, 1271, 1271, 1271, 1203, 1203, 1203, 1203, 1271, 1096,
+ /*    10 */  1125, 1125, 1255, 1332, 1332, 1332, 1332, 1332, 1332, 1202,
+ /*    20 */  1332, 1332, 1332, 1332, 1271, 1100, 1131, 1332, 1332, 1332,
+ /*    30 */  1332, 1204, 1205, 1332, 1332, 1332, 1254, 1256, 1141, 1140,
+ /*    40 */  1139, 1138, 1237, 1112, 1136, 1129, 1133, 1204, 1198, 1199,
+ /*    50 */  1197, 1201, 1205, 1332, 1132, 1167, 1182, 1166, 1332, 1332,
+ /*    60 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*    70 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*    80 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*    90 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   100 */  1332, 1332, 1332, 1332, 1176, 1181, 1188, 1180, 1177, 1169,
+ /*   110 */  1168, 1170, 1171, 1332, 1019, 1067, 1332, 1332, 1332, 1172,
+ /*   120 */  1332, 1173, 1185, 1184, 1183, 1262, 1289, 1288, 1332, 1332,
+ /*   130 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   140 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   150 */  1332, 1332, 1332, 1332, 1332, 1281, 1271, 1025, 1025, 1332,
+ /*   160 */  1271, 1271, 1271, 1271, 1271, 1271, 1267, 1100, 1091, 1332,
+ /*   170 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   180 */  1259, 1257, 1332, 1218, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   190 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   200 */  1332, 1332, 1332, 1332, 1096, 1332, 1332, 1332, 1332, 1332,
+ /*   210 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1283, 1332, 1232,
+ /*   220 */  1096, 1096, 1096, 1098, 1080, 1090, 1004, 1135, 1114, 1114,
+ /*   230 */  1321, 1135, 1321, 1042, 1303, 1039, 1125, 1114, 1200, 1125,
+ /*   240 */  1125, 1097, 1090, 1332, 1324, 1105, 1105, 1323, 1323, 1105,
+ /*   250 */  1146, 1070, 1135, 1076, 1076, 1076, 1076, 1105, 1016, 1135,
+ /*   260 */  1146, 1070, 1070, 1135, 1105, 1016, 1236, 1318, 1105, 1105,
+ /*   270 */  1016, 1211, 1105, 1016, 1105, 1016, 1211, 1068, 1068, 1068,
+ /*   280 */  1057, 1211, 1068, 1042, 1068, 1057, 1068, 1068, 1118, 1113,
+ /*   290 */  1118, 1113, 1118, 1113, 1118, 1113, 1105, 1206, 1105, 1332,
+ /*   300 */  1211, 1215, 1215, 1211, 1130, 1119, 1128, 1126, 1135, 1022,
+ /*   310 */  1060, 1286, 1286, 1282, 1282, 1282, 1282, 1329, 1329, 1267,
+ /*   320 */  1298, 1298, 1044, 1044, 1298, 1332, 1332, 1332, 1332, 1332,
+ /*   330 */  1332, 1293, 1332, 1220, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   340 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   350 */  1332, 1332, 1152, 1332, 1000, 1264, 1332, 1332, 1263, 1332,
+ /*   360 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   370 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1320,
+ /*   380 */  1332, 1332, 1332, 1332, 1332, 1332, 1235, 1234, 1332, 1332,
+ /*   390 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   400 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332,
+ /*   410 */  1332, 1082, 1332, 1332, 1332, 1307, 1332, 1332, 1332, 1332,
+ /*   420 */  1332, 1332, 1332, 1127, 1332, 1120, 1332, 1332, 1311, 1332,
+ /*   430 */  1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1273,
+ /*   440 */  1332, 1332, 1332, 1272, 1332, 1332, 1332, 1332, 1332, 1154,
+ /*   450 */  1332, 1153, 1157, 1332, 1010, 1332,
 };
 /********** End of lemon-generated parsing tables *****************************/
 
@@ -132581,7 +133843,7 @@
   "VALUES",        "DISTINCT",      "DOT",           "FROM",        
   "JOIN",          "USING",         "ORDER",         "GROUP",       
   "HAVING",        "LIMIT",         "WHERE",         "INTO",        
-  "INTEGER",       "FLOAT",         "BLOB",          "VARIABLE",    
+  "FLOAT",         "BLOB",          "INTEGER",       "VARIABLE",    
   "CASE",          "WHEN",          "THEN",          "ELSE",        
   "INDEX",         "ALTER",         "ADD",           "error",       
   "input",         "cmdlist",       "ecmd",          "explain",     
@@ -132757,195 +134019,199 @@
  /* 136 */ "where_opt ::= WHERE expr",
  /* 137 */ "cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt",
  /* 138 */ "setlist ::= setlist COMMA nm EQ expr",
- /* 139 */ "setlist ::= nm EQ expr",
- /* 140 */ "cmd ::= with insert_cmd INTO fullname idlist_opt select",
- /* 141 */ "cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES",
- /* 142 */ "insert_cmd ::= INSERT orconf",
- /* 143 */ "insert_cmd ::= REPLACE",
- /* 144 */ "idlist_opt ::=",
- /* 145 */ "idlist_opt ::= LP idlist RP",
- /* 146 */ "idlist ::= idlist COMMA nm",
- /* 147 */ "idlist ::= nm",
- /* 148 */ "expr ::= LP expr RP",
- /* 149 */ "term ::= NULL",
- /* 150 */ "expr ::= ID|INDEXED",
- /* 151 */ "expr ::= JOIN_KW",
- /* 152 */ "expr ::= nm DOT nm",
- /* 153 */ "expr ::= nm DOT nm DOT nm",
- /* 154 */ "term ::= INTEGER|FLOAT|BLOB",
- /* 155 */ "term ::= STRING",
- /* 156 */ "expr ::= VARIABLE",
- /* 157 */ "expr ::= expr COLLATE ID|STRING",
- /* 158 */ "expr ::= CAST LP expr AS typetoken RP",
- /* 159 */ "expr ::= ID|INDEXED LP distinct exprlist RP",
- /* 160 */ "expr ::= ID|INDEXED LP STAR RP",
- /* 161 */ "term ::= CTIME_KW",
- /* 162 */ "expr ::= expr AND expr",
- /* 163 */ "expr ::= expr OR expr",
- /* 164 */ "expr ::= expr LT|GT|GE|LE expr",
- /* 165 */ "expr ::= expr EQ|NE expr",
- /* 166 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr",
- /* 167 */ "expr ::= expr PLUS|MINUS expr",
- /* 168 */ "expr ::= expr STAR|SLASH|REM expr",
- /* 169 */ "expr ::= expr CONCAT expr",
- /* 170 */ "likeop ::= LIKE_KW|MATCH",
- /* 171 */ "likeop ::= NOT LIKE_KW|MATCH",
- /* 172 */ "expr ::= expr likeop expr",
- /* 173 */ "expr ::= expr likeop expr ESCAPE expr",
- /* 174 */ "expr ::= expr ISNULL|NOTNULL",
- /* 175 */ "expr ::= expr NOT NULL",
- /* 176 */ "expr ::= expr IS expr",
- /* 177 */ "expr ::= expr IS NOT expr",
- /* 178 */ "expr ::= NOT expr",
- /* 179 */ "expr ::= BITNOT expr",
- /* 180 */ "expr ::= MINUS expr",
- /* 181 */ "expr ::= PLUS expr",
- /* 182 */ "between_op ::= BETWEEN",
- /* 183 */ "between_op ::= NOT BETWEEN",
- /* 184 */ "expr ::= expr between_op expr AND expr",
- /* 185 */ "in_op ::= IN",
- /* 186 */ "in_op ::= NOT IN",
- /* 187 */ "expr ::= expr in_op LP exprlist RP",
- /* 188 */ "expr ::= LP select RP",
- /* 189 */ "expr ::= expr in_op LP select RP",
- /* 190 */ "expr ::= expr in_op nm dbnm paren_exprlist",
- /* 191 */ "expr ::= EXISTS LP select RP",
- /* 192 */ "expr ::= CASE case_operand case_exprlist case_else END",
- /* 193 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr",
- /* 194 */ "case_exprlist ::= WHEN expr THEN expr",
- /* 195 */ "case_else ::= ELSE expr",
- /* 196 */ "case_else ::=",
- /* 197 */ "case_operand ::= expr",
- /* 198 */ "case_operand ::=",
- /* 199 */ "exprlist ::=",
- /* 200 */ "nexprlist ::= nexprlist COMMA expr",
- /* 201 */ "nexprlist ::= expr",
- /* 202 */ "paren_exprlist ::=",
- /* 203 */ "paren_exprlist ::= LP exprlist RP",
- /* 204 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt",
- /* 205 */ "uniqueflag ::= UNIQUE",
- /* 206 */ "uniqueflag ::=",
- /* 207 */ "eidlist_opt ::=",
- /* 208 */ "eidlist_opt ::= LP eidlist RP",
- /* 209 */ "eidlist ::= eidlist COMMA nm collate sortorder",
- /* 210 */ "eidlist ::= nm collate sortorder",
- /* 211 */ "collate ::=",
- /* 212 */ "collate ::= COLLATE ID|STRING",
- /* 213 */ "cmd ::= DROP INDEX ifexists fullname",
- /* 214 */ "cmd ::= VACUUM",
- /* 215 */ "cmd ::= VACUUM nm",
- /* 216 */ "cmd ::= PRAGMA nm dbnm",
- /* 217 */ "cmd ::= PRAGMA nm dbnm EQ nmnum",
- /* 218 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP",
- /* 219 */ "cmd ::= PRAGMA nm dbnm EQ minus_num",
- /* 220 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP",
- /* 221 */ "plus_num ::= PLUS INTEGER|FLOAT",
- /* 222 */ "minus_num ::= MINUS INTEGER|FLOAT",
- /* 223 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END",
- /* 224 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause",
- /* 225 */ "trigger_time ::= BEFORE",
- /* 226 */ "trigger_time ::= AFTER",
- /* 227 */ "trigger_time ::= INSTEAD OF",
- /* 228 */ "trigger_time ::=",
- /* 229 */ "trigger_event ::= DELETE|INSERT",
- /* 230 */ "trigger_event ::= UPDATE",
- /* 231 */ "trigger_event ::= UPDATE OF idlist",
- /* 232 */ "when_clause ::=",
- /* 233 */ "when_clause ::= WHEN expr",
- /* 234 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI",
- /* 235 */ "trigger_cmd_list ::= trigger_cmd SEMI",
- /* 236 */ "trnm ::= nm DOT nm",
- /* 237 */ "tridxby ::= INDEXED BY nm",
- /* 238 */ "tridxby ::= NOT INDEXED",
- /* 239 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt",
- /* 240 */ "trigger_cmd ::= insert_cmd INTO trnm idlist_opt select",
- /* 241 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt",
- /* 242 */ "trigger_cmd ::= select",
- /* 243 */ "expr ::= RAISE LP IGNORE RP",
- /* 244 */ "expr ::= RAISE LP raisetype COMMA nm RP",
- /* 245 */ "raisetype ::= ROLLBACK",
- /* 246 */ "raisetype ::= ABORT",
- /* 247 */ "raisetype ::= FAIL",
- /* 248 */ "cmd ::= DROP TRIGGER ifexists fullname",
- /* 249 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt",
- /* 250 */ "cmd ::= DETACH database_kw_opt expr",
- /* 251 */ "key_opt ::=",
- /* 252 */ "key_opt ::= KEY expr",
- /* 253 */ "cmd ::= REINDEX",
- /* 254 */ "cmd ::= REINDEX nm dbnm",
- /* 255 */ "cmd ::= ANALYZE",
- /* 256 */ "cmd ::= ANALYZE nm dbnm",
- /* 257 */ "cmd ::= ALTER TABLE fullname RENAME TO nm",
- /* 258 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist",
- /* 259 */ "add_column_fullname ::= fullname",
- /* 260 */ "cmd ::= create_vtab",
- /* 261 */ "cmd ::= create_vtab LP vtabarglist RP",
- /* 262 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm",
- /* 263 */ "vtabarg ::=",
- /* 264 */ "vtabargtoken ::= ANY",
- /* 265 */ "vtabargtoken ::= lp anylist RP",
- /* 266 */ "lp ::= LP",
- /* 267 */ "with ::=",
- /* 268 */ "with ::= WITH wqlist",
- /* 269 */ "with ::= WITH RECURSIVE wqlist",
- /* 270 */ "wqlist ::= nm eidlist_opt AS LP select RP",
- /* 271 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP",
- /* 272 */ "input ::= cmdlist",
- /* 273 */ "cmdlist ::= cmdlist ecmd",
- /* 274 */ "cmdlist ::= ecmd",
- /* 275 */ "ecmd ::= SEMI",
- /* 276 */ "ecmd ::= explain cmdx SEMI",
- /* 277 */ "explain ::=",
- /* 278 */ "trans_opt ::=",
- /* 279 */ "trans_opt ::= TRANSACTION",
- /* 280 */ "trans_opt ::= TRANSACTION nm",
- /* 281 */ "savepoint_opt ::= SAVEPOINT",
- /* 282 */ "savepoint_opt ::=",
- /* 283 */ "cmd ::= create_table create_table_args",
- /* 284 */ "columnlist ::= columnlist COMMA columnname carglist",
- /* 285 */ "columnlist ::= columnname carglist",
- /* 286 */ "nm ::= ID|INDEXED",
- /* 287 */ "nm ::= STRING",
- /* 288 */ "nm ::= JOIN_KW",
- /* 289 */ "typetoken ::= typename",
- /* 290 */ "typename ::= ID|STRING",
- /* 291 */ "signed ::= plus_num",
- /* 292 */ "signed ::= minus_num",
- /* 293 */ "carglist ::= carglist ccons",
- /* 294 */ "carglist ::=",
- /* 295 */ "ccons ::= NULL onconf",
- /* 296 */ "conslist_opt ::= COMMA conslist",
- /* 297 */ "conslist ::= conslist tconscomma tcons",
- /* 298 */ "conslist ::= tcons",
- /* 299 */ "tconscomma ::=",
- /* 300 */ "defer_subclause_opt ::= defer_subclause",
- /* 301 */ "resolvetype ::= raisetype",
- /* 302 */ "selectnowith ::= oneselect",
- /* 303 */ "oneselect ::= values",
- /* 304 */ "sclp ::= selcollist COMMA",
- /* 305 */ "as ::= ID|STRING",
- /* 306 */ "expr ::= term",
- /* 307 */ "exprlist ::= nexprlist",
- /* 308 */ "nmnum ::= plus_num",
- /* 309 */ "nmnum ::= nm",
- /* 310 */ "nmnum ::= ON",
- /* 311 */ "nmnum ::= DELETE",
- /* 312 */ "nmnum ::= DEFAULT",
- /* 313 */ "plus_num ::= INTEGER|FLOAT",
- /* 314 */ "foreach_clause ::=",
- /* 315 */ "foreach_clause ::= FOR EACH ROW",
- /* 316 */ "trnm ::= nm",
- /* 317 */ "tridxby ::=",
- /* 318 */ "database_kw_opt ::= DATABASE",
- /* 319 */ "database_kw_opt ::=",
- /* 320 */ "kwcolumn_opt ::=",
- /* 321 */ "kwcolumn_opt ::= COLUMNKW",
- /* 322 */ "vtabarglist ::= vtabarg",
- /* 323 */ "vtabarglist ::= vtabarglist COMMA vtabarg",
- /* 324 */ "vtabarg ::= vtabarg vtabargtoken",
- /* 325 */ "anylist ::=",
- /* 326 */ "anylist ::= anylist LP anylist RP",
- /* 327 */ "anylist ::= anylist ANY",
+ /* 139 */ "setlist ::= setlist COMMA LP idlist RP EQ expr",
+ /* 140 */ "setlist ::= nm EQ expr",
+ /* 141 */ "setlist ::= LP idlist RP EQ expr",
+ /* 142 */ "cmd ::= with insert_cmd INTO fullname idlist_opt select",
+ /* 143 */ "cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES",
+ /* 144 */ "insert_cmd ::= INSERT orconf",
+ /* 145 */ "insert_cmd ::= REPLACE",
+ /* 146 */ "idlist_opt ::=",
+ /* 147 */ "idlist_opt ::= LP idlist RP",
+ /* 148 */ "idlist ::= idlist COMMA nm",
+ /* 149 */ "idlist ::= nm",
+ /* 150 */ "expr ::= LP expr RP",
+ /* 151 */ "term ::= NULL",
+ /* 152 */ "expr ::= ID|INDEXED",
+ /* 153 */ "expr ::= JOIN_KW",
+ /* 154 */ "expr ::= nm DOT nm",
+ /* 155 */ "expr ::= nm DOT nm DOT nm",
+ /* 156 */ "term ::= FLOAT|BLOB",
+ /* 157 */ "term ::= STRING",
+ /* 158 */ "term ::= INTEGER",
+ /* 159 */ "expr ::= VARIABLE",
+ /* 160 */ "expr ::= expr COLLATE ID|STRING",
+ /* 161 */ "expr ::= CAST LP expr AS typetoken RP",
+ /* 162 */ "expr ::= ID|INDEXED LP distinct exprlist RP",
+ /* 163 */ "expr ::= ID|INDEXED LP STAR RP",
+ /* 164 */ "term ::= CTIME_KW",
+ /* 165 */ "expr ::= LP nexprlist COMMA expr RP",
+ /* 166 */ "expr ::= expr AND expr",
+ /* 167 */ "expr ::= expr OR expr",
+ /* 168 */ "expr ::= expr LT|GT|GE|LE expr",
+ /* 169 */ "expr ::= expr EQ|NE expr",
+ /* 170 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr",
+ /* 171 */ "expr ::= expr PLUS|MINUS expr",
+ /* 172 */ "expr ::= expr STAR|SLASH|REM expr",
+ /* 173 */ "expr ::= expr CONCAT expr",
+ /* 174 */ "likeop ::= LIKE_KW|MATCH",
+ /* 175 */ "likeop ::= NOT LIKE_KW|MATCH",
+ /* 176 */ "expr ::= expr likeop expr",
+ /* 177 */ "expr ::= expr likeop expr ESCAPE expr",
+ /* 178 */ "expr ::= expr ISNULL|NOTNULL",
+ /* 179 */ "expr ::= expr NOT NULL",
+ /* 180 */ "expr ::= expr IS expr",
+ /* 181 */ "expr ::= expr IS NOT expr",
+ /* 182 */ "expr ::= NOT expr",
+ /* 183 */ "expr ::= BITNOT expr",
+ /* 184 */ "expr ::= MINUS expr",
+ /* 185 */ "expr ::= PLUS expr",
+ /* 186 */ "between_op ::= BETWEEN",
+ /* 187 */ "between_op ::= NOT BETWEEN",
+ /* 188 */ "expr ::= expr between_op expr AND expr",
+ /* 189 */ "in_op ::= IN",
+ /* 190 */ "in_op ::= NOT IN",
+ /* 191 */ "expr ::= expr in_op LP exprlist RP",
+ /* 192 */ "expr ::= LP select RP",
+ /* 193 */ "expr ::= expr in_op LP select RP",
+ /* 194 */ "expr ::= expr in_op nm dbnm paren_exprlist",
+ /* 195 */ "expr ::= EXISTS LP select RP",
+ /* 196 */ "expr ::= CASE case_operand case_exprlist case_else END",
+ /* 197 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr",
+ /* 198 */ "case_exprlist ::= WHEN expr THEN expr",
+ /* 199 */ "case_else ::= ELSE expr",
+ /* 200 */ "case_else ::=",
+ /* 201 */ "case_operand ::= expr",
+ /* 202 */ "case_operand ::=",
+ /* 203 */ "exprlist ::=",
+ /* 204 */ "nexprlist ::= nexprlist COMMA expr",
+ /* 205 */ "nexprlist ::= expr",
+ /* 206 */ "paren_exprlist ::=",
+ /* 207 */ "paren_exprlist ::= LP exprlist RP",
+ /* 208 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt",
+ /* 209 */ "uniqueflag ::= UNIQUE",
+ /* 210 */ "uniqueflag ::=",
+ /* 211 */ "eidlist_opt ::=",
+ /* 212 */ "eidlist_opt ::= LP eidlist RP",
+ /* 213 */ "eidlist ::= eidlist COMMA nm collate sortorder",
+ /* 214 */ "eidlist ::= nm collate sortorder",
+ /* 215 */ "collate ::=",
+ /* 216 */ "collate ::= COLLATE ID|STRING",
+ /* 217 */ "cmd ::= DROP INDEX ifexists fullname",
+ /* 218 */ "cmd ::= VACUUM",
+ /* 219 */ "cmd ::= VACUUM nm",
+ /* 220 */ "cmd ::= PRAGMA nm dbnm",
+ /* 221 */ "cmd ::= PRAGMA nm dbnm EQ nmnum",
+ /* 222 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP",
+ /* 223 */ "cmd ::= PRAGMA nm dbnm EQ minus_num",
+ /* 224 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP",
+ /* 225 */ "plus_num ::= PLUS INTEGER|FLOAT",
+ /* 226 */ "minus_num ::= MINUS INTEGER|FLOAT",
+ /* 227 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END",
+ /* 228 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause",
+ /* 229 */ "trigger_time ::= BEFORE",
+ /* 230 */ "trigger_time ::= AFTER",
+ /* 231 */ "trigger_time ::= INSTEAD OF",
+ /* 232 */ "trigger_time ::=",
+ /* 233 */ "trigger_event ::= DELETE|INSERT",
+ /* 234 */ "trigger_event ::= UPDATE",
+ /* 235 */ "trigger_event ::= UPDATE OF idlist",
+ /* 236 */ "when_clause ::=",
+ /* 237 */ "when_clause ::= WHEN expr",
+ /* 238 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI",
+ /* 239 */ "trigger_cmd_list ::= trigger_cmd SEMI",
+ /* 240 */ "trnm ::= nm DOT nm",
+ /* 241 */ "tridxby ::= INDEXED BY nm",
+ /* 242 */ "tridxby ::= NOT INDEXED",
+ /* 243 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt",
+ /* 244 */ "trigger_cmd ::= insert_cmd INTO trnm idlist_opt select",
+ /* 245 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt",
+ /* 246 */ "trigger_cmd ::= select",
+ /* 247 */ "expr ::= RAISE LP IGNORE RP",
+ /* 248 */ "expr ::= RAISE LP raisetype COMMA nm RP",
+ /* 249 */ "raisetype ::= ROLLBACK",
+ /* 250 */ "raisetype ::= ABORT",
+ /* 251 */ "raisetype ::= FAIL",
+ /* 252 */ "cmd ::= DROP TRIGGER ifexists fullname",
+ /* 253 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt",
+ /* 254 */ "cmd ::= DETACH database_kw_opt expr",
+ /* 255 */ "key_opt ::=",
+ /* 256 */ "key_opt ::= KEY expr",
+ /* 257 */ "cmd ::= REINDEX",
+ /* 258 */ "cmd ::= REINDEX nm dbnm",
+ /* 259 */ "cmd ::= ANALYZE",
+ /* 260 */ "cmd ::= ANALYZE nm dbnm",
+ /* 261 */ "cmd ::= ALTER TABLE fullname RENAME TO nm",
+ /* 262 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist",
+ /* 263 */ "add_column_fullname ::= fullname",
+ /* 264 */ "cmd ::= create_vtab",
+ /* 265 */ "cmd ::= create_vtab LP vtabarglist RP",
+ /* 266 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm",
+ /* 267 */ "vtabarg ::=",
+ /* 268 */ "vtabargtoken ::= ANY",
+ /* 269 */ "vtabargtoken ::= lp anylist RP",
+ /* 270 */ "lp ::= LP",
+ /* 271 */ "with ::=",
+ /* 272 */ "with ::= WITH wqlist",
+ /* 273 */ "with ::= WITH RECURSIVE wqlist",
+ /* 274 */ "wqlist ::= nm eidlist_opt AS LP select RP",
+ /* 275 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP",
+ /* 276 */ "input ::= cmdlist",
+ /* 277 */ "cmdlist ::= cmdlist ecmd",
+ /* 278 */ "cmdlist ::= ecmd",
+ /* 279 */ "ecmd ::= SEMI",
+ /* 280 */ "ecmd ::= explain cmdx SEMI",
+ /* 281 */ "explain ::=",
+ /* 282 */ "trans_opt ::=",
+ /* 283 */ "trans_opt ::= TRANSACTION",
+ /* 284 */ "trans_opt ::= TRANSACTION nm",
+ /* 285 */ "savepoint_opt ::= SAVEPOINT",
+ /* 286 */ "savepoint_opt ::=",
+ /* 287 */ "cmd ::= create_table create_table_args",
+ /* 288 */ "columnlist ::= columnlist COMMA columnname carglist",
+ /* 289 */ "columnlist ::= columnname carglist",
+ /* 290 */ "nm ::= ID|INDEXED",
+ /* 291 */ "nm ::= STRING",
+ /* 292 */ "nm ::= JOIN_KW",
+ /* 293 */ "typetoken ::= typename",
+ /* 294 */ "typename ::= ID|STRING",
+ /* 295 */ "signed ::= plus_num",
+ /* 296 */ "signed ::= minus_num",
+ /* 297 */ "carglist ::= carglist ccons",
+ /* 298 */ "carglist ::=",
+ /* 299 */ "ccons ::= NULL onconf",
+ /* 300 */ "conslist_opt ::= COMMA conslist",
+ /* 301 */ "conslist ::= conslist tconscomma tcons",
+ /* 302 */ "conslist ::= tcons",
+ /* 303 */ "tconscomma ::=",
+ /* 304 */ "defer_subclause_opt ::= defer_subclause",
+ /* 305 */ "resolvetype ::= raisetype",
+ /* 306 */ "selectnowith ::= oneselect",
+ /* 307 */ "oneselect ::= values",
+ /* 308 */ "sclp ::= selcollist COMMA",
+ /* 309 */ "as ::= ID|STRING",
+ /* 310 */ "expr ::= term",
+ /* 311 */ "exprlist ::= nexprlist",
+ /* 312 */ "nmnum ::= plus_num",
+ /* 313 */ "nmnum ::= nm",
+ /* 314 */ "nmnum ::= ON",
+ /* 315 */ "nmnum ::= DELETE",
+ /* 316 */ "nmnum ::= DEFAULT",
+ /* 317 */ "plus_num ::= INTEGER|FLOAT",
+ /* 318 */ "foreach_clause ::=",
+ /* 319 */ "foreach_clause ::= FOR EACH ROW",
+ /* 320 */ "trnm ::= nm",
+ /* 321 */ "tridxby ::=",
+ /* 322 */ "database_kw_opt ::= DATABASE",
+ /* 323 */ "database_kw_opt ::=",
+ /* 324 */ "kwcolumn_opt ::=",
+ /* 325 */ "kwcolumn_opt ::= COLUMNKW",
+ /* 326 */ "vtabarglist ::= vtabarg",
+ /* 327 */ "vtabarglist ::= vtabarglist COMMA vtabarg",
+ /* 328 */ "vtabarg ::= vtabarg vtabargtoken",
+ /* 329 */ "anylist ::=",
+ /* 330 */ "anylist ::= anylist LP anylist RP",
+ /* 331 */ "anylist ::= anylist ANY",
 };
 #endif /* NDEBUG */
 
@@ -133202,50 +134468,47 @@
   assert( stateno <= YY_SHIFT_COUNT );
   do{
     i = yy_shift_ofst[stateno];
-    if( i==YY_SHIFT_USE_DFLT ) return yy_default[stateno];
     assert( iLookAhead!=YYNOCODE );
     i += iLookAhead;
     if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){
-      if( iLookAhead>0 ){
 #ifdef YYFALLBACK
-        YYCODETYPE iFallback;            /* Fallback token */
-        if( iLookAhead<sizeof(yyFallback)/sizeof(yyFallback[0])
-               && (iFallback = yyFallback[iLookAhead])!=0 ){
+      YYCODETYPE iFallback;            /* Fallback token */
+      if( iLookAhead<sizeof(yyFallback)/sizeof(yyFallback[0])
+             && (iFallback = yyFallback[iLookAhead])!=0 ){
 #ifndef NDEBUG
-          if( yyTraceFILE ){
-            fprintf(yyTraceFILE, "%sFALLBACK %s => %s\n",
-               yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[iFallback]);
-          }
-#endif
-          assert( yyFallback[iFallback]==0 ); /* Fallback loop must terminate */
-          iLookAhead = iFallback;
-          continue;
+        if( yyTraceFILE ){
+          fprintf(yyTraceFILE, "%sFALLBACK %s => %s\n",
+             yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[iFallback]);
         }
 #endif
+        assert( yyFallback[iFallback]==0 ); /* Fallback loop must terminate */
+        iLookAhead = iFallback;
+        continue;
+      }
+#endif
 #ifdef YYWILDCARD
-        {
-          int j = i - iLookAhead + YYWILDCARD;
-          if( 
+      {
+        int j = i - iLookAhead + YYWILDCARD;
+        if( 
 #if YY_SHIFT_MIN+YYWILDCARD<0
-            j>=0 &&
+          j>=0 &&
 #endif
 #if YY_SHIFT_MAX+YYWILDCARD>=YY_ACTTAB_COUNT
-            j<YY_ACTTAB_COUNT &&
+          j<YY_ACTTAB_COUNT &&
 #endif
-            yy_lookahead[j]==YYWILDCARD
-          ){
+          yy_lookahead[j]==YYWILDCARD && iLookAhead>0
+        ){
 #ifndef NDEBUG
-            if( yyTraceFILE ){
-              fprintf(yyTraceFILE, "%sWILDCARD %s => %s\n",
-                 yyTracePrompt, yyTokenName[iLookAhead],
-                 yyTokenName[YYWILDCARD]);
-            }
-#endif /* NDEBUG */
-            return yy_action[j];
+          if( yyTraceFILE ){
+            fprintf(yyTraceFILE, "%sWILDCARD %s => %s\n",
+               yyTracePrompt, yyTokenName[iLookAhead],
+               yyTokenName[YYWILDCARD]);
           }
+#endif /* NDEBUG */
+          return yy_action[j];
         }
-#endif /* YYWILDCARD */
       }
+#endif /* YYWILDCARD */
       return yy_default[stateno];
     }else{
       return yy_action[i];
@@ -133511,7 +134774,9 @@
   { 201, 2 },
   { 149, 8 },
   { 218, 5 },
+  { 218, 7 },
   { 218, 3 },
+  { 218, 5 },
   { 149, 6 },
   { 149, 7 },
   { 219, 2 },
@@ -133528,12 +134793,14 @@
   { 173, 5 },
   { 172, 1 },
   { 172, 1 },
+  { 172, 1 },
   { 173, 1 },
   { 173, 3 },
   { 173, 6 },
   { 173, 5 },
   { 173, 4 },
   { 172, 1 },
+  { 173, 5 },
   { 173, 3 },
   { 173, 3 },
   { 173, 3 },
@@ -133821,7 +135088,7 @@
       case 67: /* defer_subclause_opt ::= */ yytestcase(yyruleno==67);
       case 76: /* ifexists ::= */ yytestcase(yyruleno==76);
       case 90: /* distinct ::= */ yytestcase(yyruleno==90);
-      case 211: /* collate ::= */ yytestcase(yyruleno==211);
+      case 215: /* collate ::= */ yytestcase(yyruleno==215);
 {yymsp[1].minor.yy194 = 0;}
         break;
       case 17: /* ifnotexists ::= IF NOT EXISTS */
@@ -133960,14 +135227,14 @@
         break;
       case 56: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */
       case 71: /* orconf ::= OR resolvetype */ yytestcase(yyruleno==71);
-      case 142: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==142);
+      case 144: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==144);
 {yymsp[-1].minor.yy194 = yymsp[0].minor.yy194;}
         break;
       case 58: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */
       case 75: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==75);
-      case 183: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==183);
-      case 186: /* in_op ::= NOT IN */ yytestcase(yyruleno==186);
-      case 212: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==212);
+      case 187: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==187);
+      case 190: /* in_op ::= NOT IN */ yytestcase(yyruleno==190);
+      case 216: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==216);
 {yymsp[-1].minor.yy194 = 1;}
         break;
       case 59: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */
@@ -134003,7 +135270,7 @@
 {yymsp[0].minor.yy194 = OE_Ignore;}
         break;
       case 73: /* resolvetype ::= REPLACE */
-      case 143: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==143);
+      case 145: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==145);
 {yymsp[0].minor.yy194 = OE_Replace;}
         break;
       case 74: /* cmd ::= DROP TABLE ifexists fullname */
@@ -134131,9 +135398,9 @@
       case 91: /* sclp ::= */
       case 119: /* orderby_opt ::= */ yytestcase(yyruleno==119);
       case 126: /* groupby_opt ::= */ yytestcase(yyruleno==126);
-      case 199: /* exprlist ::= */ yytestcase(yyruleno==199);
-      case 202: /* paren_exprlist ::= */ yytestcase(yyruleno==202);
-      case 207: /* eidlist_opt ::= */ yytestcase(yyruleno==207);
+      case 203: /* exprlist ::= */ yytestcase(yyruleno==203);
+      case 206: /* paren_exprlist ::= */ yytestcase(yyruleno==206);
+      case 211: /* eidlist_opt ::= */ yytestcase(yyruleno==211);
 {yymsp[1].minor.yy148 = 0;}
         break;
       case 92: /* selcollist ::= sclp expr as */
@@ -134151,16 +135418,16 @@
         break;
       case 94: /* selcollist ::= sclp nm DOT STAR */
 {
-  Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0, &yymsp[0].minor.yy0);
+  Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0, 0);
   Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0);
   Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
   yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, pDot);
 }
         break;
       case 95: /* as ::= AS nm */
       case 106: /* dbnm ::= DOT nm */ yytestcase(yyruleno==106);
-      case 221: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==221);
-      case 222: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==222);
+      case 225: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==225);
+      case 226: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==226);
 {yymsp[-1].minor.yy0 = yymsp[0].minor.yy0;}
         break;
       case 97: /* from ::= */
@@ -134243,14 +135510,14 @@
       case 112: /* on_opt ::= ON expr */
       case 129: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==129);
       case 136: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==136);
-      case 195: /* case_else ::= ELSE expr */ yytestcase(yyruleno==195);
+      case 199: /* case_else ::= ELSE expr */ yytestcase(yyruleno==199);
 {yymsp[-1].minor.yy72 = yymsp[0].minor.yy190.pExpr;}
         break;
       case 113: /* on_opt ::= */
       case 128: /* having_opt ::= */ yytestcase(yyruleno==128);
       case 135: /* where_opt ::= */ yytestcase(yyruleno==135);
-      case 196: /* case_else ::= */ yytestcase(yyruleno==196);
-      case 198: /* case_operand ::= */ yytestcase(yyruleno==198);
+      case 200: /* case_else ::= */ yytestcase(yyruleno==200);
+      case 202: /* case_operand ::= */ yytestcase(yyruleno==202);
 {yymsp[1].minor.yy72 = 0;}
         break;
       case 115: /* indexed_opt ::= INDEXED BY nm */
@@ -134263,7 +135530,7 @@
 {yymsp[-3].minor.yy254 = yymsp[-1].minor.yy254;}
         break;
       case 118: /* using_opt ::= */
-      case 144: /* idlist_opt ::= */ yytestcase(yyruleno==144);
+      case 146: /* idlist_opt ::= */ yytestcase(yyruleno==146);
 {yymsp[1].minor.yy254 = 0;}
         break;
       case 120: /* orderby_opt ::= ORDER BY sortlist */
@@ -134324,69 +135591,89 @@
   sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy148, &yymsp[-2].minor.yy0, 1);
 }
         break;
-      case 139: /* setlist ::= nm EQ expr */
+      case 139: /* setlist ::= setlist COMMA LP idlist RP EQ expr */
 {
+  yymsp[-6].minor.yy148 = sqlite3ExprListAppendVector(pParse, yymsp[-6].minor.yy148, yymsp[-3].minor.yy254, yymsp[0].minor.yy190.pExpr);
+}
+        break;
+      case 140: /* setlist ::= nm EQ expr */
+{
   yylhsminor.yy148 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy190.pExpr);
   sqlite3ExprListSetName(pParse, yylhsminor.yy148, &yymsp[-2].minor.yy0, 1);
 }
   yymsp[-2].minor.yy148 = yylhsminor.yy148;
         break;
-      case 140: /* cmd ::= with insert_cmd INTO fullname idlist_opt select */
+      case 141: /* setlist ::= LP idlist RP EQ expr */
 {
+  yymsp[-4].minor.yy148 = sqlite3ExprListAppendVector(pParse, 0, yymsp[-3].minor.yy254, yymsp[0].minor.yy190.pExpr);
+}
+        break;
+      case 142: /* cmd ::= with insert_cmd INTO fullname idlist_opt select */
+{
   sqlite3WithPush(pParse, yymsp[-5].minor.yy285, 1);
   sqlite3Insert(pParse, yymsp[-2].minor.yy185, yymsp[0].minor.yy243, yymsp[-1].minor.yy254, yymsp[-4].minor.yy194);
 }
         break;
-      case 141: /* cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */
+      case 143: /* cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */
 {
   sqlite3WithPush(pParse, yymsp[-6].minor.yy285, 1);
   sqlite3Insert(pParse, yymsp[-3].minor.yy185, 0, yymsp[-2].minor.yy254, yymsp[-5].minor.yy194);
 }
         break;
-      case 145: /* idlist_opt ::= LP idlist RP */
+      case 147: /* idlist_opt ::= LP idlist RP */
 {yymsp[-2].minor.yy254 = yymsp[-1].minor.yy254;}
         break;
-      case 146: /* idlist ::= idlist COMMA nm */
+      case 148: /* idlist ::= idlist COMMA nm */
 {yymsp[-2].minor.yy254 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy254,&yymsp[0].minor.yy0);}
         break;
-      case 147: /* idlist ::= nm */
+      case 149: /* idlist ::= nm */
 {yymsp[0].minor.yy254 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0); /*A-overwrites-Y*/}
         break;
-      case 148: /* expr ::= LP expr RP */
+      case 150: /* expr ::= LP expr RP */
 {spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/  yymsp[-2].minor.yy190.pExpr = yymsp[-1].minor.yy190.pExpr;}
         break;
-      case 149: /* term ::= NULL */
-      case 154: /* term ::= INTEGER|FLOAT|BLOB */ yytestcase(yyruleno==154);
-      case 155: /* term ::= STRING */ yytestcase(yyruleno==155);
+      case 151: /* term ::= NULL */
+      case 156: /* term ::= FLOAT|BLOB */ yytestcase(yyruleno==156);
+      case 157: /* term ::= STRING */ yytestcase(yyruleno==157);
 {spanExpr(&yymsp[0].minor.yy190,pParse,yymsp[0].major,yymsp[0].minor.yy0);/*A-overwrites-X*/}
         break;
-      case 150: /* expr ::= ID|INDEXED */
-      case 151: /* expr ::= JOIN_KW */ yytestcase(yyruleno==151);
+      case 152: /* expr ::= ID|INDEXED */
+      case 153: /* expr ::= JOIN_KW */ yytestcase(yyruleno==153);
 {spanExpr(&yymsp[0].minor.yy190,pParse,TK_ID,yymsp[0].minor.yy0); /*A-overwrites-X*/}
         break;
-      case 152: /* expr ::= nm DOT nm */
+      case 154: /* expr ::= nm DOT nm */
 {
-  Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0);
-  Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0);
+  Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1);
+  Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1);
   spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/
   yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2, 0);
 }
         break;
-      case 153: /* expr ::= nm DOT nm DOT nm */
+      case 155: /* expr ::= nm DOT nm DOT nm */
 {
-  Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-4].minor.yy0);
-  Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0);
-  Expr *temp3 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0);
+  Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-4].minor.yy0, 1);
+  Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1);
+  Expr *temp3 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1);
   Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3, 0);
   spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/
   yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4, 0);
 }
         break;
-      case 156: /* expr ::= VARIABLE */
+      case 158: /* term ::= INTEGER */
 {
+  yylhsminor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_INTEGER, &yymsp[0].minor.yy0, 1);
+  yylhsminor.yy190.zStart = yymsp[0].minor.yy0.z;
+  yylhsminor.yy190.zEnd = yymsp[0].minor.yy0.z + yymsp[0].minor.yy0.n;
+  if( yylhsminor.yy190.pExpr ) yylhsminor.yy190.pExpr->flags |= EP_Leaf;
+}
+  yymsp[0].minor.yy190 = yylhsminor.yy190;
+        break;
+      case 159: /* expr ::= VARIABLE */
+{
   if( !(yymsp[0].minor.yy0.z[0]=='#' && sqlite3Isdigit(yymsp[0].minor.yy0.z[1])) ){
+    u32 n = yymsp[0].minor.yy0.n;
     spanExpr(&yymsp[0].minor.yy190, pParse, TK_VARIABLE, yymsp[0].minor.yy0);
-    sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy190.pExpr);
+    sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy190.pExpr, n);
   }else{
     /* When doing a nested parse, one can include terms in an expression
     ** that look like this:   #1 #2 ...  These terms refer to registers
@@ -134398,25 +135685,25 @@
       sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &t);
       yymsp[0].minor.yy190.pExpr = 0;
     }else{
-      yymsp[0].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0, &t);
+      yymsp[0].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0, 0);
       if( yymsp[0].minor.yy190.pExpr ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy190.pExpr->iTable);
     }
   }
 }
         break;
-      case 157: /* expr ::= expr COLLATE ID|STRING */
+      case 160: /* expr ::= expr COLLATE ID|STRING */
 {
   yymsp[-2].minor.yy190.pExpr = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy190.pExpr, &yymsp[0].minor.yy0, 1);
   yymsp[-2].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
 }
         break;
-      case 158: /* expr ::= CAST LP expr AS typetoken RP */
+      case 161: /* expr ::= CAST LP expr AS typetoken RP */
 {
   spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/
   yymsp[-5].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CAST, yymsp[-3].minor.yy190.pExpr, 0, &yymsp[-1].minor.yy0);
 }
         break;
-      case 159: /* expr ::= ID|INDEXED LP distinct exprlist RP */
+      case 162: /* expr ::= ID|INDEXED LP distinct exprlist RP */
 {
   if( yymsp[-1].minor.yy148 && yymsp[-1].minor.yy148->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){
     sqlite3ErrorMsg(pParse, "too many arguments on function %T", &yymsp[-4].minor.yy0);
@@ -134429,92 +135716,109 @@
 }
   yymsp[-4].minor.yy190 = yylhsminor.yy190;
         break;
-      case 160: /* expr ::= ID|INDEXED LP STAR RP */
+      case 163: /* expr ::= ID|INDEXED LP STAR RP */
 {
   yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0);
   spanSet(&yylhsminor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0);
 }
   yymsp[-3].minor.yy190 = yylhsminor.yy190;
         break;
-      case 161: /* term ::= CTIME_KW */
+      case 164: /* term ::= CTIME_KW */
 {
   yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0);
   spanSet(&yylhsminor.yy190, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0);
 }
   yymsp[0].minor.yy190 = yylhsminor.yy190;
         break;
-      case 162: /* expr ::= expr AND expr */
-      case 163: /* expr ::= expr OR expr */ yytestcase(yyruleno==163);
-      case 164: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==164);
-      case 165: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==165);
-      case 166: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==166);
-      case 167: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==167);
-      case 168: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==168);
-      case 169: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==169);
+      case 165: /* expr ::= LP nexprlist COMMA expr RP */
+{
+  ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy148, yymsp[-1].minor.yy190.pExpr);
+  yylhsminor.yy190.pExpr = sqlite3PExpr(pParse, TK_VECTOR, 0, 0, 0);
+  if( yylhsminor.yy190.pExpr ){
+    yylhsminor.yy190.pExpr->x.pList = pList;
+    spanSet(&yylhsminor.yy190, &yymsp[-4].minor.yy0, &yymsp[0].minor.yy0);
+  }else{
+    sqlite3ExprListDelete(pParse->db, pList);
+  }
+}
+  yymsp[-4].minor.yy190 = yylhsminor.yy190;
+        break;
+      case 166: /* expr ::= expr AND expr */
+      case 167: /* expr ::= expr OR expr */ yytestcase(yyruleno==167);
+      case 168: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==168);
+      case 169: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==169);
+      case 170: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==170);
+      case 171: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==171);
+      case 172: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==172);
+      case 173: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==173);
 {spanBinaryExpr(pParse,yymsp[-1].major,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy190);}
         break;
-      case 170: /* likeop ::= LIKE_KW|MATCH */
-{yymsp[0].minor.yy392.eOperator = yymsp[0].minor.yy0; yymsp[0].minor.yy392.bNot = 0;/*A-overwrites-X*/}
+      case 174: /* likeop ::= LIKE_KW|MATCH */
+{yymsp[0].minor.yy0=yymsp[0].minor.yy0;/*A-overwrites-X*/}
         break;
-      case 171: /* likeop ::= NOT LIKE_KW|MATCH */
-{yymsp[-1].minor.yy392.eOperator = yymsp[0].minor.yy0; yymsp[-1].minor.yy392.bNot = 1;}
+      case 175: /* likeop ::= NOT LIKE_KW|MATCH */
+{yymsp[-1].minor.yy0=yymsp[0].minor.yy0; yymsp[-1].minor.yy0.n|=0x80000000; /*yymsp[-1].minor.yy0-overwrite-yymsp[0].minor.yy0*/}
         break;
-      case 172: /* expr ::= expr likeop expr */
+      case 176: /* expr ::= expr likeop expr */
 {
   ExprList *pList;
+  int bNot = yymsp[-1].minor.yy0.n & 0x80000000;
+  yymsp[-1].minor.yy0.n &= 0x7fffffff;
   pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy190.pExpr);
   pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy190.pExpr);
-  yymsp[-2].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy392.eOperator);
-  exprNot(pParse, yymsp[-1].minor.yy392.bNot, &yymsp[-2].minor.yy190);
+  yymsp[-2].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy0);
+  exprNot(pParse, bNot, &yymsp[-2].minor.yy190);
   yymsp[-2].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd;
   if( yymsp[-2].minor.yy190.pExpr ) yymsp[-2].minor.yy190.pExpr->flags |= EP_InfixFunc;
 }
         break;
-      case 173: /* expr ::= expr likeop expr ESCAPE expr */
+      case 177: /* expr ::= expr likeop expr ESCAPE expr */
 {
   ExprList *pList;
+  int bNot = yymsp[-3].minor.yy0.n & 0x80000000;
+  yymsp[-3].minor.yy0.n &= 0x7fffffff;
   pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr);
   pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy190.pExpr);
   pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr);
-  yymsp[-4].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy392.eOperator);
-  exprNot(pParse, yymsp[-3].minor.yy392.bNot, &yymsp[-4].minor.yy190);
+  yymsp[-4].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy0);
+  exprNot(pParse, bNot, &yymsp[-4].minor.yy190);
   yymsp[-4].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd;
   if( yymsp[-4].minor.yy190.pExpr ) yymsp[-4].minor.yy190.pExpr->flags |= EP_InfixFunc;
 }
         break;
-      case 174: /* expr ::= expr ISNULL|NOTNULL */
+      case 178: /* expr ::= expr ISNULL|NOTNULL */
 {spanUnaryPostfix(pParse,yymsp[0].major,&yymsp[-1].minor.yy190,&yymsp[0].minor.yy0);}
         break;
-      case 175: /* expr ::= expr NOT NULL */
+      case 179: /* expr ::= expr NOT NULL */
 {spanUnaryPostfix(pParse,TK_NOTNULL,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy0);}
         break;
-      case 176: /* expr ::= expr IS expr */
+      case 180: /* expr ::= expr IS expr */
 {
   spanBinaryExpr(pParse,TK_IS,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy190);
   binaryToUnaryIfNull(pParse, yymsp[0].minor.yy190.pExpr, yymsp[-2].minor.yy190.pExpr, TK_ISNULL);
 }
         break;
-      case 177: /* expr ::= expr IS NOT expr */
+      case 181: /* expr ::= expr IS NOT expr */
 {
   spanBinaryExpr(pParse,TK_ISNOT,&yymsp[-3].minor.yy190,&yymsp[0].minor.yy190);
   binaryToUnaryIfNull(pParse, yymsp[0].minor.yy190.pExpr, yymsp[-3].minor.yy190.pExpr, TK_NOTNULL);
 }
         break;
-      case 178: /* expr ::= NOT expr */
-      case 179: /* expr ::= BITNOT expr */ yytestcase(yyruleno==179);
+      case 182: /* expr ::= NOT expr */
+      case 183: /* expr ::= BITNOT expr */ yytestcase(yyruleno==183);
 {spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,yymsp[-1].major,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/}
         break;
-      case 180: /* expr ::= MINUS expr */
+      case 184: /* expr ::= MINUS expr */
 {spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,TK_UMINUS,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/}
         break;
-      case 181: /* expr ::= PLUS expr */
+      case 185: /* expr ::= PLUS expr */
 {spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,TK_UPLUS,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/}
         break;
-      case 182: /* between_op ::= BETWEEN */
-      case 185: /* in_op ::= IN */ yytestcase(yyruleno==185);
+      case 186: /* between_op ::= BETWEEN */
+      case 189: /* in_op ::= IN */ yytestcase(yyruleno==189);
 {yymsp[0].minor.yy194 = 0;}
         break;
-      case 184: /* expr ::= expr between_op expr AND expr */
+      case 188: /* expr ::= expr between_op expr AND expr */
 {
   ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr);
   pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr);
@@ -134528,7 +135832,7 @@
   yymsp[-4].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd;
 }
         break;
-      case 187: /* expr ::= expr in_op LP exprlist RP */
+      case 191: /* expr ::= expr in_op LP exprlist RP */
 {
     if( yymsp[-1].minor.yy148==0 ){
       /* Expressions of the form
@@ -134581,22 +135885,22 @@
     yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
   }
         break;
-      case 188: /* expr ::= LP select RP */
+      case 192: /* expr ::= LP select RP */
 {
     spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/
     yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0, 0);
     sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy190.pExpr, yymsp[-1].minor.yy243);
   }
         break;
-      case 189: /* expr ::= expr in_op LP select RP */
+      case 193: /* expr ::= expr in_op LP select RP */
 {
     yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0, 0);
     sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, yymsp[-1].minor.yy243);
     exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190);
     yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
   }
         break;
-      case 190: /* expr ::= expr in_op nm dbnm paren_exprlist */
+      case 194: /* expr ::= expr in_op nm dbnm paren_exprlist */
 {
     SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);
     Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0);
@@ -134607,15 +135911,15 @@
     yymsp[-4].minor.yy190.zEnd = yymsp[-1].minor.yy0.z ? &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n] : &yymsp[-2].minor.yy0.z[yymsp[-2].minor.yy0.n];
   }
         break;
-      case 191: /* expr ::= EXISTS LP select RP */
+      case 195: /* expr ::= EXISTS LP select RP */
 {
     Expr *p;
     spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/
     p = yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0, 0);
     sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy243);
   }
         break;
-      case 192: /* expr ::= CASE case_operand case_exprlist case_else END */
+      case 196: /* expr ::= CASE case_operand case_exprlist case_else END */
 {
   spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0);  /*A-overwrites-C*/
   yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy72, 0, 0);
@@ -134628,166 +135932,168 @@
   }
 }
         break;
-      case 193: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */
+      case 197: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */
 {
   yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy148, yymsp[-2].minor.yy190.pExpr);
   yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy148, yymsp[0].minor.yy190.pExpr);
 }
         break;
-      case 194: /* case_exprlist ::= WHEN expr THEN expr */
+      case 198: /* case_exprlist ::= WHEN expr THEN expr */
 {
   yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr);
   yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, yymsp[0].minor.yy190.pExpr);
 }
         break;
-      case 197: /* case_operand ::= expr */
+      case 201: /* case_operand ::= expr */
 {yymsp[0].minor.yy72 = yymsp[0].minor.yy190.pExpr; /*A-overwrites-X*/}
         break;
-      case 200: /* nexprlist ::= nexprlist COMMA expr */
+      case 204: /* nexprlist ::= nexprlist COMMA expr */
 {yymsp[-2].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy148,yymsp[0].minor.yy190.pExpr);}
         break;
-      case 201: /* nexprlist ::= expr */
+      case 205: /* nexprlist ::= expr */
 {yymsp[0].minor.yy148 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy190.pExpr); /*A-overwrites-Y*/}
         break;
-      case 203: /* paren_exprlist ::= LP exprlist RP */
-      case 208: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==208);
+      case 207: /* paren_exprlist ::= LP exprlist RP */
+      case 212: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==212);
 {yymsp[-2].minor.yy148 = yymsp[-1].minor.yy148;}
         break;
-      case 204: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */
+      case 208: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */
 {
   sqlite3CreateIndex(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, 
                      sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy148, yymsp[-10].minor.yy194,
                       &yymsp[-11].minor.yy0, yymsp[0].minor.yy72, SQLITE_SO_ASC, yymsp[-8].minor.yy194, SQLITE_IDXTYPE_APPDEF);
 }
         break;
-      case 205: /* uniqueflag ::= UNIQUE */
-      case 246: /* raisetype ::= ABORT */ yytestcase(yyruleno==246);
+      case 209: /* uniqueflag ::= UNIQUE */
+      case 250: /* raisetype ::= ABORT */ yytestcase(yyruleno==250);
 {yymsp[0].minor.yy194 = OE_Abort;}
         break;
-      case 206: /* uniqueflag ::= */
+      case 210: /* uniqueflag ::= */
 {yymsp[1].minor.yy194 = OE_None;}
         break;
-      case 209: /* eidlist ::= eidlist COMMA nm collate sortorder */
+      case 213: /* eidlist ::= eidlist COMMA nm collate sortorder */
 {
   yymsp[-4].minor.yy148 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy148, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy194, yymsp[0].minor.yy194);
 }
         break;
-      case 210: /* eidlist ::= nm collate sortorder */
+      case 214: /* eidlist ::= nm collate sortorder */
 {
   yymsp[-2].minor.yy148 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy194, yymsp[0].minor.yy194); /*A-overwrites-Y*/
 }
         break;
-      case 213: /* cmd ::= DROP INDEX ifexists fullname */
+      case 217: /* cmd ::= DROP INDEX ifexists fullname */
 {sqlite3DropIndex(pParse, yymsp[0].minor.yy185, yymsp[-1].minor.yy194);}
         break;
-      case 214: /* cmd ::= VACUUM */
-      case 215: /* cmd ::= VACUUM nm */ yytestcase(yyruleno==215);
-{sqlite3Vacuum(pParse);}
+      case 218: /* cmd ::= VACUUM */
+{sqlite3Vacuum(pParse,0);}
         break;
-      case 216: /* cmd ::= PRAGMA nm dbnm */
+      case 219: /* cmd ::= VACUUM nm */
+{sqlite3Vacuum(pParse,&yymsp[0].minor.yy0);}
+        break;
+      case 220: /* cmd ::= PRAGMA nm dbnm */
 {sqlite3Pragma(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0,0);}
         break;
-      case 217: /* cmd ::= PRAGMA nm dbnm EQ nmnum */
+      case 221: /* cmd ::= PRAGMA nm dbnm EQ nmnum */
 {sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,0);}
         break;
-      case 218: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */
+      case 222: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */
 {sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,0);}
         break;
-      case 219: /* cmd ::= PRAGMA nm dbnm EQ minus_num */
+      case 223: /* cmd ::= PRAGMA nm dbnm EQ minus_num */
 {sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,1);}
         break;
-      case 220: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */
+      case 224: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */
 {sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,1);}
         break;
-      case 223: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */
+      case 227: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */
 {
   Token all;
   all.z = yymsp[-3].minor.yy0.z;
   all.n = (int)(yymsp[0].minor.yy0.z - yymsp[-3].minor.yy0.z) + yymsp[0].minor.yy0.n;
   sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy145, &all);
 }
         break;
-      case 224: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */
+      case 228: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */
 {
   sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy194, yymsp[-4].minor.yy332.a, yymsp[-4].minor.yy332.b, yymsp[-2].minor.yy185, yymsp[0].minor.yy72, yymsp[-10].minor.yy194, yymsp[-8].minor.yy194);
   yymsp[-10].minor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0); /*A-overwrites-T*/
 }
         break;
-      case 225: /* trigger_time ::= BEFORE */
+      case 229: /* trigger_time ::= BEFORE */
 { yymsp[0].minor.yy194 = TK_BEFORE; }
         break;
-      case 226: /* trigger_time ::= AFTER */
+      case 230: /* trigger_time ::= AFTER */
 { yymsp[0].minor.yy194 = TK_AFTER;  }
         break;
-      case 227: /* trigger_time ::= INSTEAD OF */
+      case 231: /* trigger_time ::= INSTEAD OF */
 { yymsp[-1].minor.yy194 = TK_INSTEAD;}
         break;
-      case 228: /* trigger_time ::= */
+      case 232: /* trigger_time ::= */
 { yymsp[1].minor.yy194 = TK_BEFORE; }
         break;
-      case 229: /* trigger_event ::= DELETE|INSERT */
-      case 230: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==230);
+      case 233: /* trigger_event ::= DELETE|INSERT */
+      case 234: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==234);
 {yymsp[0].minor.yy332.a = yymsp[0].major; /*A-overwrites-X*/ yymsp[0].minor.yy332.b = 0;}
         break;
-      case 231: /* trigger_event ::= UPDATE OF idlist */
+      case 235: /* trigger_event ::= UPDATE OF idlist */
 {yymsp[-2].minor.yy332.a = TK_UPDATE; yymsp[-2].minor.yy332.b = yymsp[0].minor.yy254;}
         break;
-      case 232: /* when_clause ::= */
-      case 251: /* key_opt ::= */ yytestcase(yyruleno==251);
+      case 236: /* when_clause ::= */
+      case 255: /* key_opt ::= */ yytestcase(yyruleno==255);
 { yymsp[1].minor.yy72 = 0; }
         break;
-      case 233: /* when_clause ::= WHEN expr */
-      case 252: /* key_opt ::= KEY expr */ yytestcase(yyruleno==252);
+      case 237: /* when_clause ::= WHEN expr */
+      case 256: /* key_opt ::= KEY expr */ yytestcase(yyruleno==256);
 { yymsp[-1].minor.yy72 = yymsp[0].minor.yy190.pExpr; }
         break;
-      case 234: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */
+      case 238: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */
 {
   assert( yymsp[-2].minor.yy145!=0 );
   yymsp[-2].minor.yy145->pLast->pNext = yymsp[-1].minor.yy145;
   yymsp[-2].minor.yy145->pLast = yymsp[-1].minor.yy145;
 }
         break;
-      case 235: /* trigger_cmd_list ::= trigger_cmd SEMI */
+      case 239: /* trigger_cmd_list ::= trigger_cmd SEMI */
 { 
   assert( yymsp[-1].minor.yy145!=0 );
   yymsp[-1].minor.yy145->pLast = yymsp[-1].minor.yy145;
 }
         break;
-      case 236: /* trnm ::= nm DOT nm */
+      case 240: /* trnm ::= nm DOT nm */
 {
   yymsp[-2].minor.yy0 = yymsp[0].minor.yy0;
   sqlite3ErrorMsg(pParse, 
         "qualified table names are not allowed on INSERT, UPDATE, and DELETE "
         "statements within triggers");
 }
         break;
-      case 237: /* tridxby ::= INDEXED BY nm */
+      case 241: /* tridxby ::= INDEXED BY nm */
 {
   sqlite3ErrorMsg(pParse,
         "the INDEXED BY clause is not allowed on UPDATE or DELETE statements "
         "within triggers");
 }
         break;
-      case 238: /* tridxby ::= NOT INDEXED */
+      case 242: /* tridxby ::= NOT INDEXED */
 {
   sqlite3ErrorMsg(pParse,
         "the NOT INDEXED clause is not allowed on UPDATE or DELETE statements "
         "within triggers");
 }
         break;
-      case 239: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */
+      case 243: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */
 {yymsp[-6].minor.yy145 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-4].minor.yy0, yymsp[-1].minor.yy148, yymsp[0].minor.yy72, yymsp[-5].minor.yy194);}
         break;
-      case 240: /* trigger_cmd ::= insert_cmd INTO trnm idlist_opt select */
+      case 244: /* trigger_cmd ::= insert_cmd INTO trnm idlist_opt select */
 {yymsp[-4].minor.yy145 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy254, yymsp[0].minor.yy243, yymsp[-4].minor.yy194);/*A-overwrites-R*/}
         break;
-      case 241: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */
+      case 245: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */
 {yymsp[-4].minor.yy145 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[0].minor.yy72);}
         break;
-      case 242: /* trigger_cmd ::= select */
+      case 246: /* trigger_cmd ::= select */
 {yymsp[0].minor.yy145 = sqlite3TriggerSelectStep(pParse->db, yymsp[0].minor.yy243); /*A-overwrites-X*/}
         break;
-      case 243: /* expr ::= RAISE LP IGNORE RP */
+      case 247: /* expr ::= RAISE LP IGNORE RP */
 {
   spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0);  /*A-overwrites-X*/
   yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, 0); 
@@ -134796,7 +136102,7 @@
   }
 }
         break;
-      case 244: /* expr ::= RAISE LP raisetype COMMA nm RP */
+      case 248: /* expr ::= RAISE LP raisetype COMMA nm RP */
 {
   spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0);  /*A-overwrites-X*/
   yymsp[-5].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, &yymsp[-1].minor.yy0); 
@@ -134805,151 +136111,151 @@
   }
 }
         break;
-      case 245: /* raisetype ::= ROLLBACK */
+      case 249: /* raisetype ::= ROLLBACK */
 {yymsp[0].minor.yy194 = OE_Rollback;}
         break;
-      case 247: /* raisetype ::= FAIL */
+      case 251: /* raisetype ::= FAIL */
 {yymsp[0].minor.yy194 = OE_Fail;}
         break;
-      case 248: /* cmd ::= DROP TRIGGER ifexists fullname */
+      case 252: /* cmd ::= DROP TRIGGER ifexists fullname */
 {
   sqlite3DropTrigger(pParse,yymsp[0].minor.yy185,yymsp[-1].minor.yy194);
 }
         break;
-      case 249: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */
+      case 253: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */
 {
   sqlite3Attach(pParse, yymsp[-3].minor.yy190.pExpr, yymsp[-1].minor.yy190.pExpr, yymsp[0].minor.yy72);
 }
         break;
-      case 250: /* cmd ::= DETACH database_kw_opt expr */
+      case 254: /* cmd ::= DETACH database_kw_opt expr */
 {
   sqlite3Detach(pParse, yymsp[0].minor.yy190.pExpr);
 }
         break;
-      case 253: /* cmd ::= REINDEX */
+      case 257: /* cmd ::= REINDEX */
 {sqlite3Reindex(pParse, 0, 0);}
         break;
-      case 254: /* cmd ::= REINDEX nm dbnm */
+      case 258: /* cmd ::= REINDEX nm dbnm */
 {sqlite3Reindex(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);}
         break;
-      case 255: /* cmd ::= ANALYZE */
+      case 259: /* cmd ::= ANALYZE */
 {sqlite3Analyze(pParse, 0, 0);}
         break;
-      case 256: /* cmd ::= ANALYZE nm dbnm */
+      case 260: /* cmd ::= ANALYZE nm dbnm */
 {sqlite3Analyze(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);}
         break;
-      case 257: /* cmd ::= ALTER TABLE fullname RENAME TO nm */
+      case 261: /* cmd ::= ALTER TABLE fullname RENAME TO nm */
 {
   sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy185,&yymsp[0].minor.yy0);
 }
         break;
-      case 258: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */
+      case 262: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */
 {
   yymsp[-1].minor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-1].minor.yy0.z) + pParse->sLastToken.n;
   sqlite3AlterFinishAddColumn(pParse, &yymsp[-1].minor.yy0);
 }
         break;
-      case 259: /* add_column_fullname ::= fullname */
+      case 263: /* add_column_fullname ::= fullname */
 {
   disableLookaside(pParse);
   sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy185);
 }
         break;
-      case 260: /* cmd ::= create_vtab */
+      case 264: /* cmd ::= create_vtab */
 {sqlite3VtabFinishParse(pParse,0);}
         break;
-      case 261: /* cmd ::= create_vtab LP vtabarglist RP */
+      case 265: /* cmd ::= create_vtab LP vtabarglist RP */
 {sqlite3VtabFinishParse(pParse,&yymsp[0].minor.yy0);}
         break;
-      case 262: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */
+      case 266: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */
 {
     sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy194);
 }
         break;
-      case 263: /* vtabarg ::= */
+      case 267: /* vtabarg ::= */
 {sqlite3VtabArgInit(pParse);}
         break;
-      case 264: /* vtabargtoken ::= ANY */
-      case 265: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==265);
-      case 266: /* lp ::= LP */ yytestcase(yyruleno==266);
+      case 268: /* vtabargtoken ::= ANY */
+      case 269: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==269);
+      case 270: /* lp ::= LP */ yytestcase(yyruleno==270);
 {sqlite3VtabArgExtend(pParse,&yymsp[0].minor.yy0);}
         break;
-      case 267: /* with ::= */
+      case 271: /* with ::= */
 {yymsp[1].minor.yy285 = 0;}
         break;
-      case 268: /* with ::= WITH wqlist */
+      case 272: /* with ::= WITH wqlist */
 { yymsp[-1].minor.yy285 = yymsp[0].minor.yy285; }
         break;
-      case 269: /* with ::= WITH RECURSIVE wqlist */
+      case 273: /* with ::= WITH RECURSIVE wqlist */
 { yymsp[-2].minor.yy285 = yymsp[0].minor.yy285; }
         break;
-      case 270: /* wqlist ::= nm eidlist_opt AS LP select RP */
+      case 274: /* wqlist ::= nm eidlist_opt AS LP select RP */
 {
   yymsp[-5].minor.yy285 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy148, yymsp[-1].minor.yy243); /*A-overwrites-X*/
 }
         break;
-      case 271: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */
+      case 275: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */
 {
   yymsp[-7].minor.yy285 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy285, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy148, yymsp[-1].minor.yy243);
 }
         break;
       default:
-      /* (272) input ::= cmdlist */ yytestcase(yyruleno==272);
-      /* (273) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==273);
-      /* (274) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=274);
-      /* (275) ecmd ::= SEMI */ yytestcase(yyruleno==275);
-      /* (276) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==276);
-      /* (277) explain ::= */ yytestcase(yyruleno==277);
-      /* (278) trans_opt ::= */ yytestcase(yyruleno==278);
-      /* (279) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==279);
-      /* (280) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==280);
-      /* (281) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==281);
-      /* (282) savepoint_opt ::= */ yytestcase(yyruleno==282);
-      /* (283) cmd ::= create_table create_table_args */ yytestcase(yyruleno==283);
-      /* (284) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==284);
-      /* (285) columnlist ::= columnname carglist */ yytestcase(yyruleno==285);
-      /* (286) nm ::= ID|INDEXED */ yytestcase(yyruleno==286);
-      /* (287) nm ::= STRING */ yytestcase(yyruleno==287);
-      /* (288) nm ::= JOIN_KW */ yytestcase(yyruleno==288);
-      /* (289) typetoken ::= typename */ yytestcase(yyruleno==289);
-      /* (290) typename ::= ID|STRING */ yytestcase(yyruleno==290);
-      /* (291) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=291);
-      /* (292) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=292);
-      /* (293) carglist ::= carglist ccons */ yytestcase(yyruleno==293);
-      /* (294) carglist ::= */ yytestcase(yyruleno==294);
-      /* (295) ccons ::= NULL onconf */ yytestcase(yyruleno==295);
-      /* (296) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==296);
-      /* (297) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==297);
-      /* (298) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=298);
-      /* (299) tconscomma ::= */ yytestcase(yyruleno==299);
-      /* (300) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=300);
-      /* (301) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=301);
-      /* (302) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=302);
-      /* (303) oneselect ::= values */ yytestcase(yyruleno==303);
-      /* (304) sclp ::= selcollist COMMA */ yytestcase(yyruleno==304);
-      /* (305) as ::= ID|STRING */ yytestcase(yyruleno==305);
-      /* (306) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=306);
-      /* (307) exprlist ::= nexprlist */ yytestcase(yyruleno==307);
-      /* (308) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=308);
-      /* (309) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=309);
-      /* (310) nmnum ::= ON */ yytestcase(yyruleno==310);
-      /* (311) nmnum ::= DELETE */ yytestcase(yyruleno==311);
-      /* (312) nmnum ::= DEFAULT */ yytestcase(yyruleno==312);
-      /* (313) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==313);
-      /* (314) foreach_clause ::= */ yytestcase(yyruleno==314);
-      /* (315) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==315);
-      /* (316) trnm ::= nm */ yytestcase(yyruleno==316);
-      /* (317) tridxby ::= */ yytestcase(yyruleno==317);
-      /* (318) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==318);
-      /* (319) database_kw_opt ::= */ yytestcase(yyruleno==319);
-      /* (320) kwcolumn_opt ::= */ yytestcase(yyruleno==320);
-      /* (321) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==321);
-      /* (322) vtabarglist ::= vtabarg */ yytestcase(yyruleno==322);
-      /* (323) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==323);
-      /* (324) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==324);
-      /* (325) anylist ::= */ yytestcase(yyruleno==325);
-      /* (326) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==326);
-      /* (327) anylist ::= anylist ANY */ yytestcase(yyruleno==327);
+      /* (276) input ::= cmdlist */ yytestcase(yyruleno==276);
+      /* (277) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==277);
+      /* (278) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=278);
+      /* (279) ecmd ::= SEMI */ yytestcase(yyruleno==279);
+      /* (280) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==280);
+      /* (281) explain ::= */ yytestcase(yyruleno==281);
+      /* (282) trans_opt ::= */ yytestcase(yyruleno==282);
+      /* (283) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==283);
+      /* (284) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==284);
+      /* (285) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==285);
+      /* (286) savepoint_opt ::= */ yytestcase(yyruleno==286);
+      /* (287) cmd ::= create_table create_table_args */ yytestcase(yyruleno==287);
+      /* (288) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==288);
+      /* (289) columnlist ::= columnname carglist */ yytestcase(yyruleno==289);
+      /* (290) nm ::= ID|INDEXED */ yytestcase(yyruleno==290);
+      /* (291) nm ::= STRING */ yytestcase(yyruleno==291);
+      /* (292) nm ::= JOIN_KW */ yytestcase(yyruleno==292);
+      /* (293) typetoken ::= typename */ yytestcase(yyruleno==293);
+      /* (294) typename ::= ID|STRING */ yytestcase(yyruleno==294);
+      /* (295) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=295);
+      /* (296) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=296);
+      /* (297) carglist ::= carglist ccons */ yytestcase(yyruleno==297);
+      /* (298) carglist ::= */ yytestcase(yyruleno==298);
+      /* (299) ccons ::= NULL onconf */ yytestcase(yyruleno==299);
+      /* (300) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==300);
+      /* (301) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==301);
+      /* (302) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=302);
+      /* (303) tconscomma ::= */ yytestcase(yyruleno==303);
+      /* (304) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=304);
+      /* (305) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=305);
+      /* (306) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=306);
+      /* (307) oneselect ::= values */ yytestcase(yyruleno==307);
+      /* (308) sclp ::= selcollist COMMA */ yytestcase(yyruleno==308);
+      /* (309) as ::= ID|STRING */ yytestcase(yyruleno==309);
+      /* (310) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=310);
+      /* (311) exprlist ::= nexprlist */ yytestcase(yyruleno==311);
+      /* (312) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=312);
+      /* (313) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=313);
+      /* (314) nmnum ::= ON */ yytestcase(yyruleno==314);
+      /* (315) nmnum ::= DELETE */ yytestcase(yyruleno==315);
+      /* (316) nmnum ::= DEFAULT */ yytestcase(yyruleno==316);
+      /* (317) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==317);
+      /* (318) foreach_clause ::= */ yytestcase(yyruleno==318);
+      /* (319) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==319);
+      /* (320) trnm ::= nm */ yytestcase(yyruleno==320);
+      /* (321) tridxby ::= */ yytestcase(yyruleno==321);
+      /* (322) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==322);
+      /* (323) database_kw_opt ::= */ yytestcase(yyruleno==323);
+      /* (324) kwcolumn_opt ::= */ yytestcase(yyruleno==324);
+      /* (325) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==325);
+      /* (326) vtabarglist ::= vtabarg */ yytestcase(yyruleno==326);
+      /* (327) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==327);
+      /* (328) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==328);
+      /* (329) anylist ::= */ yytestcase(yyruleno==329);
+      /* (330) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==330);
+      /* (331) anylist ::= anylist ANY */ yytestcase(yyruleno==331);
         break;
 /********** End reduce actions ************************************************/
   };
@@ -135140,7 +136446,7 @@
         yy_destructor(yypParser, (YYCODETYPE)yymajor, &yyminorunion);
         yymajor = YYNOCODE;
       }else{
-        while( yypParser->yytos >= &yypParser->yystack
+        while( yypParser->yytos >= yypParser->yystack
             && yymx != YYERRORSYMBOL
             && (yyact = yy_find_reduce_action(
                         yypParser->yytos->stateno,
@@ -136008,14 +137314,26 @@
   assert( pParse->nVar==0 );
   assert( pParse->nzVar==0 );
   assert( pParse->azVar==0 );
-  while( zSql[i]!=0 ){
+  while( 1 ){
     assert( i>=0 );
-    pParse->sLastToken.z = &zSql[i];
-    pParse->sLastToken.n = sqlite3GetToken((unsigned char*)&zSql[i],&tokenType);
-    i += pParse->sLastToken.n;
-    if( i>mxSqlLen ){
-      pParse->rc = SQLITE_TOOBIG;
-      break;
+    if( zSql[i]!=0 ){
+      pParse->sLastToken.z = &zSql[i];
+      pParse->sLastToken.n = sqlite3GetToken((u8*)&zSql[i],&tokenType);
+      i += pParse->sLastToken.n;
+      if( i>mxSqlLen ){
+        pParse->rc = SQLITE_TOOBIG;
+        break;
+      }
+    }else{
+      /* Upon reaching the end of input, call the parser two more times
+      ** with tokens TK_SEMI and 0, in that order. */
+      if( lastTokenParsed==TK_SEMI ){
+        tokenType = 0;
+      }else if( lastTokenParsed==0 ){
+        break;
+      }else{
+        tokenType = TK_SEMI;
+      }
     }
     if( tokenType>=TK_SPACE ){
       assert( tokenType==TK_SPACE || tokenType==TK_ILLEGAL );
@@ -136036,15 +137354,6 @@
   }
   assert( nErr==0 );
   pParse->zTail = &zSql[i];
-  if( pParse->rc==SQLITE_OK && db->mallocFailed==0 ){
-    assert( zSql[i]==0 );
-    if( lastTokenParsed!=TK_SEMI ){
-      sqlite3Parser(pEngine, TK_SEMI, pParse->sLastToken, pParse);
-    }
-    if( pParse->rc==SQLITE_OK && db->mallocFailed==0 ){
-      sqlite3Parser(pEngine, 0, pParse->sLastToken, pParse);
-    }
-  }
 #ifdef YYTRACKMAXSTACKDEPTH
   sqlite3_mutex_enter(sqlite3MallocMutex());
   sqlite3StatusHighwater(SQLITE_STATUS_PARSER_STACK,
@@ -136212,7 +137521,7 @@
 ** to recognize the end of a trigger can be omitted.  All we have to do
 ** is look for a semicolon that is not part of an string or comment.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *zSql){
+SQLITE_API int sqlite3_complete(const char *zSql){
   u8 state = 0;   /* Current state, using numbers defined in header comment */
   u8 token;       /* Value of the next token */
 
@@ -136377,7 +137686,7 @@
 ** above, except that the parameter is required to be UTF-16 encoded, not
 ** UTF-8.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *zSql){
+SQLITE_API int sqlite3_complete16(const void *zSql){
   sqlite3_value *pVal;
   char const *zSql8;
   int rc;
@@ -136537,24 +137846,24 @@
 /* IMPLEMENTATION-OF: R-53536-42575 The sqlite3_libversion() function returns
 ** a pointer to the to the sqlite3_version[] string constant. 
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void){ return sqlite3_version; }
+SQLITE_API const char *sqlite3_libversion(void){ return sqlite3_version; }
 
 /* IMPLEMENTATION-OF: R-63124-39300 The sqlite3_sourceid() function returns a
 ** pointer to a string constant whose value is the same as the
 ** SQLITE_SOURCE_ID C preprocessor macro. 
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
+SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
 
 /* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function
 ** returns an integer equal to SQLITE_VERSION_NUMBER.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; }
+SQLITE_API int sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; }
 
 /* IMPLEMENTATION-OF: R-20790-14025 The sqlite3_threadsafe() function returns
 ** zero if and only if SQLite was compiled with mutexing code omitted due to
 ** the SQLITE_THREADSAFE compile-time option being set to 0.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; }
+SQLITE_API int sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; }
 
 /*
 ** When compiling the test fixture or with debugging enabled (on Win32),
@@ -136627,7 +137936,7 @@
 **    *  Recursive calls to this routine from thread X return immediately
 **       without blocking.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void){
+SQLITE_API int sqlite3_initialize(void){
   MUTEX_LOGIC( sqlite3_mutex *pMaster; )       /* The main static mutex */
   int rc;                                      /* Result code */
 #ifdef SQLITE_EXTRA_INIT
@@ -136793,7 +138102,7 @@
 ** on when SQLite is already shut down.  If SQLite is already shut down
 ** when this routine is invoked, then this routine is a harmless no-op.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void){
+SQLITE_API int sqlite3_shutdown(void){
 #ifdef SQLITE_OMIT_WSD
   int rc = sqlite3_wsd_init(4096, 24);
   if( rc!=SQLITE_OK ){
@@ -136847,7 +138156,7 @@
 ** threadsafe.  Failure to heed these warnings can lead to unpredictable
 ** behavior.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_config(int op, ...){
+SQLITE_API int sqlite3_config(int op, ...){
   va_list ap;
   int rc = SQLITE_OK;
 
@@ -137212,7 +138521,7 @@
 /*
 ** Return the mutex associated with a database connection.
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3 *db){
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3 *db){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
     (void)SQLITE_MISUSE_BKPT;
@@ -137226,7 +138535,7 @@
 ** Free up as much memory as we can from the given database
 ** connection.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3 *db){
+SQLITE_API int sqlite3_db_release_memory(sqlite3 *db){
   int i;
 
 #ifdef SQLITE_ENABLE_API_ARMOR
@@ -137250,7 +138559,7 @@
 ** Flush any dirty pages in the pager-cache for any attached database
 ** to disk.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3 *db){
+SQLITE_API int sqlite3_db_cacheflush(sqlite3 *db){
   int i;
   int rc = SQLITE_OK;
   int bSeenBusy = 0;
@@ -137279,11 +138588,16 @@
 /*
 ** Configuration settings for an individual database connection
 */
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3 *db, int op, ...){
+SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){
   va_list ap;
   int rc;
   va_start(ap, op);
   switch( op ){
+    case SQLITE_DBCONFIG_MAINDBNAME: {
+      db->aDb[0].zDbSName = va_arg(ap,char*);
+      rc = SQLITE_OK;
+      break;
+    }
     case SQLITE_DBCONFIG_LOOKASIDE: {
       void *pBuf = va_arg(ap, void*); /* IMP: R-26835-10964 */
       int sz = va_arg(ap, int);       /* IMP: R-47871-25994 */
@@ -137400,7 +138714,7 @@
 /*
 ** Return the ROWID of the most recent insert
 */
-SQLITE_API sqlite_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3 *db){
+SQLITE_API sqlite_int64 sqlite3_last_insert_rowid(sqlite3 *db){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
     (void)SQLITE_MISUSE_BKPT;
@@ -137413,7 +138727,7 @@
 /*
 ** Return the number of changes in the most recent call to sqlite3_exec().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3 *db){
+SQLITE_API int sqlite3_changes(sqlite3 *db){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
     (void)SQLITE_MISUSE_BKPT;
@@ -137426,7 +138740,7 @@
 /*
 ** Return the number of changes since the database handle was opened.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3 *db){
+SQLITE_API int sqlite3_total_changes(sqlite3 *db){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
     (void)SQLITE_MISUSE_BKPT;
@@ -137577,8 +138891,8 @@
 ** unclosed resources, and arranges for deallocation when the last
 ** prepare statement or sqlite3_backup closes.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3 *db){ return sqlite3Close(db,0); }
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3 *db){ return sqlite3Close(db,1); }
+SQLITE_API int sqlite3_close(sqlite3 *db){ return sqlite3Close(db,0); }
+SQLITE_API int sqlite3_close_v2(sqlite3 *db){ return sqlite3Close(db,1); }
 
 
 /*
@@ -137985,7 +139299,7 @@
 ** This routine sets the busy callback for an Sqlite database to the
 ** given callback function with the given argument.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(
+SQLITE_API int sqlite3_busy_handler(
   sqlite3 *db,
   int (*xBusy)(void*,int),
   void *pArg
@@ -138008,7 +139322,7 @@
 ** given callback function with the given argument. The progress callback will
 ** be invoked every nOps opcodes.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(
+SQLITE_API void sqlite3_progress_handler(
   sqlite3 *db, 
   int nOps,
   int (*xProgress)(void*), 
@@ -138039,7 +139353,7 @@
 ** This routine installs a default busy handler that waits for the
 ** specified number of milliseconds before returning 0.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3 *db, int ms){
+SQLITE_API int sqlite3_busy_timeout(sqlite3 *db, int ms){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT;
 #endif
@@ -138055,7 +139369,7 @@
 /*
 ** Cause any pending operation to stop at its earliest opportunity.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3 *db){
+SQLITE_API void sqlite3_interrupt(sqlite3 *db){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
     (void)SQLITE_MISUSE_BKPT;
@@ -138171,7 +139485,7 @@
 /*
 ** Create new user functions.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
   sqlite3 *db,
   const char *zFunc,
   int nArg,
@@ -138185,7 +139499,7 @@
                                     xFinal, 0);
 }
 
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
   sqlite3 *db,
   const char *zFunc,
   int nArg,
@@ -138228,7 +139542,7 @@
 }
 
 #ifndef SQLITE_OMIT_UTF16
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
   sqlite3 *db,
   const void *zFunctionName,
   int nArg,
@@ -138268,7 +139582,7 @@
 ** A global function must exist in order for name resolution to work
 ** properly.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(
+SQLITE_API int sqlite3_overload_function(
   sqlite3 *db,
   const char *zName,
   int nArg
@@ -138300,7 +139614,7 @@
 ** SQL statement.
 */
 #ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3 *db, void(*xTrace)(void*,const char*), void *pArg){
+SQLITE_API void *sqlite3_trace(sqlite3 *db, void(*xTrace)(void*,const char*), void *pArg){
   void *pOld;
 
 #ifdef SQLITE_ENABLE_API_ARMOR
@@ -138321,7 +139635,7 @@
 
 /* Register a trace callback using the version-2 interface.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_trace_v2(
+SQLITE_API int sqlite3_trace_v2(
   sqlite3 *db,                               /* Trace this connection */
   unsigned mTrace,                           /* Mask of events to be traced */
   int(*xTrace)(unsigned,void*,void*,void*),  /* Callback to invoke */
@@ -138333,6 +139647,8 @@
   }
 #endif
   sqlite3_mutex_enter(db->mutex);
+  if( mTrace==0 ) xTrace = 0;
+  if( xTrace==0 ) mTrace = 0;
   db->mTrace = mTrace;
   db->xTrace = xTrace;
   db->pTraceArg = pArg;
@@ -138349,7 +139665,7 @@
 ** profile is a pointer to a function that is invoked at the conclusion of
 ** each SQL statement that is run.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_profile(
+SQLITE_API void *sqlite3_profile(
   sqlite3 *db,
   void (*xProfile)(void*,const char*,sqlite_uint64),
   void *pArg
@@ -138377,7 +139693,7 @@
 ** If the invoked function returns non-zero, then the commit becomes a
 ** rollback.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(
+SQLITE_API void *sqlite3_commit_hook(
   sqlite3 *db,              /* Attach the hook to this database */
   int (*xCallback)(void*),  /* Function to invoke on each commit */
   void *pArg                /* Argument to the function */
@@ -138402,7 +139718,7 @@
 ** Register a callback to be invoked each time a row is updated,
 ** inserted or deleted using this database connection.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
   sqlite3 *db,              /* Attach the hook to this database */
   void (*xCallback)(void*,int,char const *,char const *,sqlite_int64),
   void *pArg                /* Argument to the function */
@@ -138427,7 +139743,7 @@
 ** Register a callback to be invoked each time a transaction is rolled
 ** back by this database connection.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(
+SQLITE_API void *sqlite3_rollback_hook(
   sqlite3 *db,              /* Attach the hook to this database */
   void (*xCallback)(void*), /* Callback function */
   void *pArg                /* Argument to the function */
@@ -138453,7 +139769,7 @@
 ** Register a callback to be invoked each time a row is updated,
 ** inserted or deleted using this database connection.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_preupdate_hook(
+SQLITE_API void *sqlite3_preupdate_hook(
   sqlite3 *db,              /* Attach the hook to this database */
   void(*xCallback)(         /* Callback function */
     void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64),
@@ -138502,7 +139818,7 @@
 ** using sqlite3_wal_hook() disables the automatic checkpoint mechanism
 ** configured by this function.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){
 #ifdef SQLITE_OMIT_WAL
   UNUSED_PARAMETER(db);
   UNUSED_PARAMETER(nFrame);
@@ -138523,7 +139839,7 @@
 ** Register a callback to be invoked each time a transaction is written
 ** into the write-ahead-log by this database connection.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
   sqlite3 *db,                    /* Attach the hook to this db handle */
   int(*xCallback)(void *, sqlite3*, const char*, int),
   void *pArg                      /* First argument passed to xCallback() */
@@ -138550,7 +139866,7 @@
 /*
 ** Checkpoint database zDb.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
   sqlite3 *db,                    /* Database handle */
   const char *zDb,                /* Name of attached database (or NULL) */
   int eMode,                      /* SQLITE_CHECKPOINT_* value */
@@ -138605,7 +139921,7 @@
 ** to contains a zero-length string, all attached databases are 
 ** checkpointed.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){
   /* EVIDENCE-OF: R-41613-20553 The sqlite3_wal_checkpoint(D,X) is equivalent to
   ** sqlite3_wal_checkpoint_v2(D,X,SQLITE_CHECKPOINT_PASSIVE,0,0). */
   return sqlite3_wal_checkpoint_v2(db,zDb,SQLITE_CHECKPOINT_PASSIVE,0,0);
@@ -138696,7 +140012,7 @@
 ** Return UTF-8 encoded English language explanation of the most recent
 ** error.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3 *db){
+SQLITE_API const char *sqlite3_errmsg(sqlite3 *db){
   const char *z;
   if( !db ){
     return sqlite3ErrStr(SQLITE_NOMEM_BKPT);
@@ -138724,7 +140040,7 @@
 ** Return UTF-16 encoded English language explanation of the most recent
 ** error.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3 *db){
+SQLITE_API const void *sqlite3_errmsg16(sqlite3 *db){
   static const u16 outOfMem[] = {
     'o', 'u', 't', ' ', 'o', 'f', ' ', 'm', 'e', 'm', 'o', 'r', 'y', 0
   };
@@ -138769,7 +140085,7 @@
 ** Return the most recent error code generated by an SQLite routine. If NULL is
 ** passed to this function, we assume a malloc() failed during sqlite3_open().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db){
+SQLITE_API int sqlite3_errcode(sqlite3 *db){
   if( db && !sqlite3SafetyCheckSickOrOk(db) ){
     return SQLITE_MISUSE_BKPT;
   }
@@ -138778,7 +140094,7 @@
   }
   return db->errCode & db->errMask;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db){
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db){
   if( db && !sqlite3SafetyCheckSickOrOk(db) ){
     return SQLITE_MISUSE_BKPT;
   }
@@ -138787,7 +140103,7 @@
   }
   return db->errCode;
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_system_errno(sqlite3 *db){
+SQLITE_API int sqlite3_system_errno(sqlite3 *db){
   return db ? db->iSysErrno : 0;
 }  
 
@@ -138796,7 +140112,7 @@
 ** argument.  For now, this simply calls the internal sqlite3ErrStr()
 ** function.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int rc){
+SQLITE_API const char *sqlite3_errstr(int rc){
   return sqlite3ErrStr(rc);
 }
 
@@ -138944,7 +140260,7 @@
 ** It merely prevents new constructs that exceed the limit
 ** from forming.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3 *db, int limitId, int newLimit){
+SQLITE_API int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){
   int oldLimit;
 
 #ifdef SQLITE_ENABLE_API_ARMOR
@@ -139427,9 +140743,9 @@
   /* The default safety_level for the main database is FULL; for the temp
   ** database it is OFF. This matches the pager layer defaults.  
   */
-  db->aDb[0].zName = "main";
+  db->aDb[0].zDbSName = "main";
   db->aDb[0].safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1;
-  db->aDb[1].zName = "temp";
+  db->aDb[1].zDbSName = "temp";
   db->aDb[1].safety_level = PAGER_SYNCHRONOUS_OFF;
 
   db->magic = SQLITE_MAGIC_OPEN;
@@ -139443,11 +140759,20 @@
   */
   sqlite3Error(db, SQLITE_OK);
   sqlite3RegisterPerConnectionBuiltinFunctions(db);
+  rc = sqlite3_errcode(db);
 
+#ifdef SQLITE_ENABLE_FTS5
+  /* Register any built-in FTS5 module before loading the automatic
+  ** extensions. This allows automatic extensions to register FTS5 
+  ** tokenizers and auxiliary functions.  */
+  if( !db->mallocFailed && rc==SQLITE_OK ){
+    rc = sqlite3Fts5Init(db);
+  }
+#endif
+
   /* Load automatic extensions - extensions that have been registered
   ** using the sqlite3_automatic_extension() API.
   */
-  rc = sqlite3_errcode(db);
   if( rc==SQLITE_OK ){
     sqlite3AutoLoadExtensions(db);
     rc = sqlite3_errcode(db);
@@ -139476,12 +140801,6 @@
   }
 #endif
 
-#ifdef SQLITE_ENABLE_FTS5
-  if( !db->mallocFailed && rc==SQLITE_OK ){
-    rc = sqlite3Fts5Init(db);
-  }
-#endif
-
 #ifdef SQLITE_ENABLE_ICU
   if( !db->mallocFailed && rc==SQLITE_OK ){
     rc = sqlite3IcuInit(db);
@@ -139568,14 +140887,14 @@
 /*
 ** Open a new database handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
   const char *zFilename, 
   sqlite3 **ppDb 
 ){
   return openDatabase(zFilename, ppDb,
                       SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0);
 }
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb,         /* OUT: SQLite db handle */
   int flags,              /* Flags */
@@ -139588,7 +140907,7 @@
 /*
 ** Open a new database handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
   const void *zFilename, 
   sqlite3 **ppDb
 ){
@@ -139627,7 +140946,7 @@
 /*
 ** Register a new collation sequence with the database handle db.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
   sqlite3* db, 
   const char *zName, 
   int enc, 
@@ -139640,7 +140959,7 @@
 /*
 ** Register a new collation sequence with the database handle db.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
   sqlite3* db, 
   const char *zName, 
   int enc, 
@@ -139665,7 +140984,7 @@
 /*
 ** Register a new collation sequence with the database handle db.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
   sqlite3* db, 
   const void *zName,
   int enc, 
@@ -139695,7 +141014,7 @@
 ** Register a collation sequence factory callback with the database handle
 ** db. Replace any previously installed collation sequence factory.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
   sqlite3 *db, 
   void *pCollNeededArg, 
   void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*)
@@ -139716,7 +141035,7 @@
 ** Register a collation sequence factory callback with the database handle
 ** db. Replace any previously installed collation sequence factory.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
   sqlite3 *db, 
   void *pCollNeededArg, 
   void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*)
@@ -139738,7 +141057,7 @@
 ** This function is now an anachronism. It used to be used to recover from a
 ** malloc() failure, but SQLite now does this automatically.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_global_recover(void){
+SQLITE_API int sqlite3_global_recover(void){
   return SQLITE_OK;
 }
 #endif
@@ -139749,7 +141068,7 @@
 ** by default.  Autocommit is disabled by a BEGIN statement and reenabled
 ** by the next COMMIT or ROLLBACK.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3 *db){
+SQLITE_API int sqlite3_get_autocommit(sqlite3 *db){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
     (void)SQLITE_MISUSE_BKPT;
@@ -139806,15 +141125,15 @@
 ** SQLite no longer uses thread-specific data so this routine is now a
 ** no-op.  It is retained for historical compatibility.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_thread_cleanup(void){
+SQLITE_API void sqlite3_thread_cleanup(void){
 }
 #endif
 
 /*
 ** Return meta information about a specific column of a database table.
 ** See comment in sqlite3.h (sqlite.h.in) for details.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
   sqlite3 *db,                /* Connection handle */
   const char *zDbName,        /* Database name or NULL */
   const char *zTableName,     /* Table name */
@@ -139932,7 +141251,7 @@
 /*
 ** Sleep for a little while.  Return the amount of time slept.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int ms){
+SQLITE_API int sqlite3_sleep(int ms){
   sqlite3_vfs *pVfs;
   int rc;
   pVfs = sqlite3_vfs_find(0);
@@ -139948,7 +141267,7 @@
 /*
 ** Enable or disable the extended result codes.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3 *db, int onoff){
+SQLITE_API int sqlite3_extended_result_codes(sqlite3 *db, int onoff){
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT;
 #endif
@@ -139961,7 +141280,7 @@
 /*
 ** Invoke the xFileControl method on a particular database.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){
+SQLITE_API int sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){
   int rc = SQLITE_ERROR;
   Btree *pBtree;
 
@@ -140001,7 +141320,7 @@
 /*
 ** Interface to the testing logic.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...){
+SQLITE_API int sqlite3_test_control(int op, ...){
   int rc = 0;
 #ifdef SQLITE_OMIT_BUILTIN_TEST
   UNUSED_PARAMETER(op);
@@ -140269,6 +141588,15 @@
       break;
     }
 
+    /* Set the threshold at which OP_Once counters reset back to zero.
+    ** By default this is 0x7ffffffe (over 2 billion), but that value is
+    ** too big to test in a reasonable amount of time, so this control is
+    ** provided to set a small and easily reachable reset value.
+    */
+    case SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD: {
+      sqlite3GlobalConfig.iOnceResetThreshold = va_arg(ap, int);
+      break;
+    }
 
     /*   sqlite3_test_control(SQLITE_TESTCTRL_VDBE_COVERAGE, xCallback, ptr);
     **
@@ -140346,7 +141674,7 @@
 ** parameter if it exists.  If the parameter does not exist, this routine
 ** returns a NULL pointer.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam){
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam){
   if( zFilename==0 || zParam==0 ) return 0;
   zFilename += sqlite3Strlen30(zFilename) + 1;
   while( zFilename[0] ){
@@ -140361,7 +141689,7 @@
 /*
 ** Return a boolean value for a query parameter.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFilename, const char *zParam, int bDflt){
+SQLITE_API int sqlite3_uri_boolean(const char *zFilename, const char *zParam, int bDflt){
   const char *z = sqlite3_uri_parameter(zFilename, zParam);
   bDflt = bDflt!=0;
   return z ? sqlite3GetBoolean(z, bDflt) : bDflt;
@@ -140370,7 +141698,7 @@
 /*
 ** Return a 64-bit integer value for a query parameter.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(
   const char *zFilename,    /* Filename as passed to xOpen */
   const char *zParam,       /* URI parameter sought */
   sqlite3_int64 bDflt       /* return if parameter is missing */
@@ -140390,7 +141718,7 @@
   int i;
   for(i=0; i<db->nDb; i++){
     if( db->aDb[i].pBt
-     && (zDbName==0 || sqlite3StrICmp(zDbName, db->aDb[i].zName)==0)
+     && (zDbName==0 || sqlite3StrICmp(zDbName, db->aDb[i].zDbSName)==0)
     ){
       return db->aDb[i].pBt;
     }
@@ -140402,7 +141730,7 @@
 ** Return the filename of the database associated with a database
 ** connection.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName){
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName){
   Btree *pBt;
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
@@ -140418,7 +141746,7 @@
 ** Return 1 if database is read-only or 0 if read/write.  Return -1 if
 ** no such database exists.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName){
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName){
   Btree *pBt;
 #ifdef SQLITE_ENABLE_API_ARMOR
   if( !sqlite3SafetyCheckOk(db) ){
@@ -140435,7 +141763,7 @@
 ** Obtain a snapshot handle for the snapshot of database zDb currently 
 ** being read by handle db.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_snapshot_get(
+SQLITE_API int sqlite3_snapshot_get(
   sqlite3 *db, 
   const char *zDb,
   sqlite3_snapshot **ppSnapshot
@@ -140470,7 +141798,7 @@
 /*
 ** Open a read-transaction on the snapshot idendified by pSnapshot.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_snapshot_open(
+SQLITE_API int sqlite3_snapshot_open(
   sqlite3 *db, 
   const char *zDb, 
   sqlite3_snapshot *pSnapshot
@@ -140507,7 +141835,7 @@
 /*
 ** Free a snapshot handle obtained from sqlite3_snapshot_get().
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){
+SQLITE_API void sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){
   sqlite3_free(pSnapshot);
 }
 #endif /* SQLITE_ENABLE_SNAPSHOT */
@@ -140661,7 +141989,7 @@
 ** on the same "db".  If xNotify==0 then any prior callbacks are immediately
 ** cancelled.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
   sqlite3 *db,
   void (*xNotify)(void **, int),
   void *pArg
@@ -147664,7 +148992,7 @@
 #ifdef _WIN32
 __declspec(dllexport)
 #endif
-SQLITE_API int SQLITE_STDCALL sqlite3_fts3_init(
+SQLITE_API int sqlite3_fts3_init(
   sqlite3 *db, 
   char **pzErrMsg,
   const sqlite3_api_routines *pApi
@@ -161505,7 +162833,7 @@
   if( idxNum==1 ){
     /* Special case - lookup by rowid. */
     RtreeNode *pLeaf;        /* Leaf on which the required cell resides */
-    RtreeSearchPoint *p;     /* Search point for the the leaf */
+    RtreeSearchPoint *p;     /* Search point for the leaf */
     i64 iRowid = sqlite3_value_int64(argv[0]);
     i64 iNode = 0;
     rc = findLeafNode(pRtree, iRowid, &pLeaf, &iNode);
@@ -162975,10 +164303,12 @@
   int rc;
   i64 nRow = 0;
 
-  if( sqlite3_table_column_metadata(db,pRtree->zDb,"sqlite_stat1",
-          0,0,0,0,0,0)==SQLITE_ERROR ){
+  rc = sqlite3_table_column_metadata(
+      db, pRtree->zDb, "sqlite_stat1",0,0,0,0,0,0
+  );
+  if( rc!=SQLITE_OK ){
     pRtree->nRowEst = RTREE_DEFAULT_ROWEST;
-    return SQLITE_OK;
+    return rc==SQLITE_ERROR ? SQLITE_OK : rc;
   }
   zSql = sqlite3_mprintf(zFmt, pRtree->zDb, pRtree->zName);
   if( zSql==0 ){
@@ -163465,7 +164795,7 @@
 /*
 ** Register a new geometry function for use with the r-tree MATCH operator.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,                  /* Register SQL function on this connection */
   const char *zGeom,            /* Name of the new SQL function */
   int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*), /* Callback */
@@ -163489,7 +164819,7 @@
 ** Register a new 2nd-generation geometry function for use with the
 ** r-tree MATCH operator.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
   sqlite3 *db,                 /* Register SQL function on this connection */
   const char *zQueryFunc,      /* Name of new SQL function */
   int (*xQueryFunc)(sqlite3_rtree_query_info*), /* Callback */
@@ -163514,7 +164844,7 @@
 #ifdef _WIN32
 __declspec(dllexport)
 #endif
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_init(
+SQLITE_API int sqlite3_rtree_init(
   sqlite3 *db,
   char **pzErrMsg,
   const sqlite3_api_routines *pApi
@@ -164065,7 +165395,7 @@
 #ifdef _WIN32
 __declspec(dllexport)
 #endif
-SQLITE_API int SQLITE_STDCALL sqlite3_icu_init(
+SQLITE_API int sqlite3_icu_init(
   sqlite3 *db, 
   char **pzErrMsg,
   const sqlite3_api_routines *pApi
@@ -164541,7 +165871,7 @@
 ** may also be named data<integer>_<target>, where <integer> is any sequence
 ** of zero or more numeric characters (0-9). This can be significant because
 ** tables within the RBU database are always processed in order sorted by 
-** name. By judicious selection of the the <integer> portion of the names
+** name. By judicious selection of the <integer> portion of the names
 ** of the RBU tables the user can therefore control the order in which they
 ** are processed. This can be useful, for example, to ensure that "external
 ** content" FTS4 tables are updated before their underlying content tables.
@@ -164745,7 +166075,7 @@
 ** not work out of the box with zipvfs. Refer to the comment describing
 ** the zipvfs_create_vfs() API below for details on using RBU with zipvfs.
 */
-SQLITE_API sqlite3rbu *SQLITE_STDCALL sqlite3rbu_open(
+SQLITE_API sqlite3rbu *sqlite3rbu_open(
   const char *zTarget, 
   const char *zRbu,
   const char *zState
@@ -164756,16 +166086,22 @@
 ** An RBU vacuum is similar to SQLite's built-in VACUUM command, except
 ** that it can be suspended and resumed like an RBU update.
 **
-** The second argument to this function, which may not be NULL, identifies 
-** a database in which to store the state of the RBU vacuum operation if
-** it is suspended. The first time sqlite3rbu_vacuum() is called, to start
-** an RBU vacuum operation, the state database should either not exist or
-** be empty (contain no tables). If an RBU vacuum is suspended by calling
+** The second argument to this function identifies a database in which 
+** to store the state of the RBU vacuum operation if it is suspended. The 
+** first time sqlite3rbu_vacuum() is called, to start an RBU vacuum
+** operation, the state database should either not exist or be empty
+** (contain no tables). If an RBU vacuum is suspended by calling 
 ** sqlite3rbu_close() on the RBU handle before sqlite3rbu_step() has
 ** returned SQLITE_DONE, the vacuum state is stored in the state database. 
 ** The vacuum can be resumed by calling this function to open a new RBU
 ** handle specifying the same target and state databases.
 **
+** If the second argument passed to this function is NULL, then the
+** name of the state database is "<database>-vacuum", where <database>
+** is the name of the target database file. In this case, on UNIX, if the
+** state database is not already present in the file-system, it is created
+** with the same permissions as the target db is made.
+**
 ** This function does not delete the state database after an RBU vacuum
 ** is completed, even if it created it. However, if the call to
 ** sqlite3rbu_close() returns any value other than SQLITE_OK, the contents
@@ -164778,7 +166114,7 @@
 ** a description of the complications associated with using RBU with 
 ** zipvfs databases.
 */
-SQLITE_API sqlite3rbu *SQLITE_STDCALL sqlite3rbu_vacuum(
+SQLITE_API sqlite3rbu *sqlite3rbu_vacuum(
   const char *zTarget, 
   const char *zState
 );
@@ -164814,7 +166150,7 @@
 ** Database handles returned by this function remain valid until the next
 ** call to any sqlite3rbu_xxx() function other than sqlite3rbu_db().
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3rbu_db(sqlite3rbu*, int bRbu);
+SQLITE_API sqlite3 *sqlite3rbu_db(sqlite3rbu*, int bRbu);
 
 /*
 ** Do some work towards applying the RBU update to the target db. 
@@ -164828,7 +166164,7 @@
 ** SQLITE_OK, all subsequent calls on the same RBU handle are no-ops
 ** that immediately return the same value.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_step(sqlite3rbu *pRbu);
+SQLITE_API int sqlite3rbu_step(sqlite3rbu *pRbu);
 
 /*
 ** Force RBU to save its state to disk.
@@ -164840,7 +166176,7 @@
 **
 ** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_savestate(sqlite3rbu *pRbu);
+SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *pRbu);
 
 /*
 ** Close an RBU handle. 
@@ -164860,14 +166196,14 @@
 ** update has been partially applied, or SQLITE_DONE if it has been 
 ** completely applied.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_close(sqlite3rbu *pRbu, char **pzErrmsg);
+SQLITE_API int sqlite3rbu_close(sqlite3rbu *pRbu, char **pzErrmsg);
 
 /*
 ** Return the total number of key-value operations (inserts, deletes or 
 ** updates) that have been performed on the target database since the
 ** current RBU update was started.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3rbu_progress(sqlite3rbu *pRbu);
+SQLITE_API sqlite3_int64 sqlite3rbu_progress(sqlite3rbu *pRbu);
 
 /*
 ** Obtain permyriadage (permyriadage is to 10000 as percentage is to 100) 
@@ -164909,7 +166245,7 @@
 ** table exists but is not correctly populated, the value of the *pnOne
 ** output variable during stage 1 is undefined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int *pnTwo);
+SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int *pnTwo);
 
 /*
 ** Obtain an indication as to the current stage of an RBU update or vacuum.
@@ -164947,7 +166283,7 @@
 #define SQLITE_RBU_STATE_DONE       4
 #define SQLITE_RBU_STATE_ERROR      5
 
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_state(sqlite3rbu *pRbu);
+SQLITE_API int sqlite3rbu_state(sqlite3rbu *pRbu);
 
 /*
 ** Create an RBU VFS named zName that accesses the underlying file-system
@@ -164991,7 +166327,7 @@
 ** file-system via "rbu" all the time, even if it only uses RBU functionality 
 ** occasionally.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_create_vfs(const char *zName, const char *zParent);
+SQLITE_API int sqlite3rbu_create_vfs(const char *zName, const char *zParent);
 
 /*
 ** Deregister and destroy an RBU vfs created by an earlier call to
@@ -165001,7 +166337,7 @@
 ** before all database handles that use it have been closed, the results
 ** are undefined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3rbu_destroy_vfs(const char *zName);
+SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName);
 
 #if 0
 }  /* end of the 'extern "C"' block */
@@ -167257,15 +168593,18 @@
 ** error occurs, leave an error code and message in the RBU handle.
 */
 static void rbuOpenDatabase(sqlite3rbu *p){
-  assert( p->rc==SQLITE_OK );
-  assert( p->dbMain==0 && p->dbRbu==0 );
-  assert( rbuIsVacuum(p) || p->zTarget!=0 );
+  assert( p->rc || (p->dbMain==0 && p->dbRbu==0) );
+  assert( p->rc || rbuIsVacuum(p) || p->zTarget!=0 );
 
   /* Open the RBU database */
   p->dbRbu = rbuOpenDbhandle(p, p->zRbu, 1);
 
   if( p->rc==SQLITE_OK && rbuIsVacuum(p) ){
     sqlite3_file_control(p->dbRbu, "main", SQLITE_FCNTL_RBUCNT, (void*)p);
+    if( p->zState==0 ){
+      const char *zFile = sqlite3_db_filename(p->dbRbu, "main");
+      p->zState = rbuMPrintf(p, "file://%s-vacuum?modeof=%s", zFile, zFile);
+    }
   }
 
   /* If using separate RBU and state databases, attach the state database to
@@ -168095,7 +169434,7 @@
 /*
 ** Step the RBU object.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_step(sqlite3rbu *p){
+SQLITE_API int sqlite3rbu_step(sqlite3rbu *p){
   if( p ){
     switch( p->eStage ){
       case RBU_STAGE_OAL: {
@@ -168400,8 +169739,7 @@
   sqlite3rbu *p;
   size_t nTarget = zTarget ? strlen(zTarget) : 0;
   size_t nRbu = strlen(zRbu);
-  size_t nState = zState ? strlen(zState) : 0;
-  size_t nByte = sizeof(sqlite3rbu) + nTarget+1 + nRbu+1+ nState+1;
+  size_t nByte = sizeof(sqlite3rbu) + nTarget+1 + nRbu+1;
 
   p = (sqlite3rbu*)sqlite3_malloc64(nByte);
   if( p ){
@@ -168423,8 +169761,7 @@
       memcpy(p->zRbu, zRbu, nRbu+1);
       pCsr += nRbu+1;
       if( zState ){
-        p->zState = pCsr;
-        memcpy(p->zState, zState, nState+1);
+        p->zState = rbuMPrintf(p, "%s", zState);
       }
       rbuOpenDatabase(p);
     }
@@ -168535,32 +169872,48 @@
 }
 
 /*
+** Allocate and return an RBU handle with all fields zeroed except for the
+** error code, which is set to SQLITE_MISUSE.
+*/
+static sqlite3rbu *rbuMisuseError(void){
+  sqlite3rbu *pRet;
+  pRet = sqlite3_malloc64(sizeof(sqlite3rbu));
+  if( pRet ){
+    memset(pRet, 0, sizeof(sqlite3rbu));
+    pRet->rc = SQLITE_MISUSE;
+  }
+  return pRet;
+}
+
+/*
 ** Open and return a new RBU handle. 
 */
-SQLITE_API sqlite3rbu *SQLITE_STDCALL sqlite3rbu_open(
+SQLITE_API sqlite3rbu *sqlite3rbu_open(
   const char *zTarget, 
   const char *zRbu,
   const char *zState
 ){
+  if( zTarget==0 || zRbu==0 ){ return rbuMisuseError(); }
   /* TODO: Check that zTarget and zRbu are non-NULL */
   return openRbuHandle(zTarget, zRbu, zState);
 }
 
 /*
 ** Open a handle to begin or resume an RBU VACUUM operation.
 */
-SQLITE_API sqlite3rbu *SQLITE_STDCALL sqlite3rbu_vacuum(
+SQLITE_API sqlite3rbu *sqlite3rbu_vacuum(
   const char *zTarget, 
   const char *zState
 ){
+  if( zTarget==0 ){ return rbuMisuseError(); }
   /* TODO: Check that both arguments are non-NULL */
   return openRbuHandle(0, zTarget, zState);
 }
 
 /*
 ** Return the database handle used by pRbu.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3rbu_db(sqlite3rbu *pRbu, int bRbu){
+SQLITE_API sqlite3 *sqlite3rbu_db(sqlite3rbu *pRbu, int bRbu){
   sqlite3 *db = 0;
   if( pRbu ){
     db = (bRbu ? pRbu->dbRbu : pRbu->dbMain);
@@ -168592,7 +169945,7 @@
 /*
 ** Close the RBU handle.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_close(sqlite3rbu *p, char **pzErrmsg){
+SQLITE_API int sqlite3rbu_close(sqlite3rbu *p, char **pzErrmsg){
   int rc;
   if( p ){
 
@@ -168630,6 +169983,7 @@
     rbuEditErrmsg(p);
     rc = p->rc;
     *pzErrmsg = p->zErrmsg;
+    sqlite3_free(p->zState);
     sqlite3_free(p);
   }else{
     rc = SQLITE_NOMEM;
@@ -168643,15 +169997,15 @@
 ** updates) that have been performed on the target database since the
 ** current RBU update was started.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3rbu_progress(sqlite3rbu *pRbu){
+SQLITE_API sqlite3_int64 sqlite3rbu_progress(sqlite3rbu *pRbu){
   return pRbu->nProgress;
 }
 
 /*
 ** Return permyriadage progress indications for the two main stages of
 ** an RBU update.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3rbu_bp_progress(sqlite3rbu *p, int *pnOne, int *pnTwo){
+SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *p, int *pnOne, int *pnTwo){
   const int MAX_PROGRESS = 10000;
   switch( p->eStage ){
     case RBU_STAGE_OAL:
@@ -168686,7 +170040,7 @@
 /*
 ** Return the current state of the RBU vacuum or update operation.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_state(sqlite3rbu *p){
+SQLITE_API int sqlite3rbu_state(sqlite3rbu *p){
   int aRes[] = {
     0, SQLITE_RBU_STATE_OAL, SQLITE_RBU_STATE_MOVE,
     0, SQLITE_RBU_STATE_CHECKPOINT, SQLITE_RBU_STATE_DONE
@@ -168714,7 +170068,7 @@
   }
 }
 
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_savestate(sqlite3rbu *p){
+SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *p){
   int rc = p->rc;
   if( rc==SQLITE_DONE ) return SQLITE_OK;
 
@@ -169541,7 +170895,7 @@
 ** Deregister and destroy an RBU vfs created by an earlier call to
 ** sqlite3rbu_create_vfs().
 */
-SQLITE_API void SQLITE_STDCALL sqlite3rbu_destroy_vfs(const char *zName){
+SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName){
   sqlite3_vfs *pVfs = sqlite3_vfs_find(zName);
   if( pVfs && pVfs->xOpen==rbuVfsOpen ){
     sqlite3_mutex_free(((rbu_vfs*)pVfs)->mutex);
@@ -169555,7 +170909,7 @@
 ** via existing VFS zParent. The new object is registered as a non-default
 ** VFS with SQLite before returning.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_create_vfs(const char *zName, const char *zParent){
+SQLITE_API int sqlite3rbu_create_vfs(const char *zName, const char *zParent){
 
   /* Template for VFS */
   static sqlite3_vfs vfs_template = {
@@ -170241,7 +171595,7 @@
       "  UNION ALL  "
       "SELECT name, rootpage, type"
       "  FROM \"%w\".%s WHERE rootpage!=0"
-      "  ORDER BY name", pTab->db->aDb[pCsr->iDb].zName, zMaster);
+      "  ORDER BY name", pTab->db->aDb[pCsr->iDb].zDbSName, zMaster);
   if( zSql==0 ){
     return SQLITE_NOMEM_BKPT;
   }else{
@@ -170295,7 +171649,7 @@
     default: {          /* schema */
       sqlite3 *db = sqlite3_context_db_handle(ctx);
       int iDb = pCsr->iDb;
-      sqlite3_result_text(ctx, db->aDb[iDb].zName, -1, SQLITE_STATIC);
+      sqlite3_result_text(ctx, db->aDb[iDb].zDbSName, -1, SQLITE_STATIC);
       break;
     }
   }
@@ -171800,7 +173154,7 @@
   return rc;
 }
 
-SQLITE_API int SQLITE_STDCALL sqlite3session_diff(
+SQLITE_API int sqlite3session_diff(
   sqlite3_session *pSession,
   const char *zFrom,
   const char *zTbl,
@@ -171894,7 +173248,7 @@
 ** Create a session object. This session object will record changes to
 ** database zDb attached to connection db.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_create(
+SQLITE_API int sqlite3session_create(
   sqlite3 *db,                    /* Database handle */
   const char *zDb,                /* Name of db (e.g. "main") */
   sqlite3_session **ppSession     /* OUT: New session object */
@@ -171956,7 +173310,7 @@
 /*
 ** Delete a session object previously allocated using sqlite3session_create().
 */
-SQLITE_API void SQLITE_STDCALL sqlite3session_delete(sqlite3_session *pSession){
+SQLITE_API void sqlite3session_delete(sqlite3_session *pSession){
   sqlite3 *db = pSession->db;
   sqlite3_session *pHead;
   sqlite3_session **pp;
@@ -171985,7 +173339,7 @@
 /*
 ** Set a table filter on a Session Object.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3session_table_filter(
+SQLITE_API void sqlite3session_table_filter(
   sqlite3_session *pSession, 
   int(*xFilter)(void*, const char*),
   void *pCtx                      /* First argument passed to xFilter */
@@ -172003,7 +173357,7 @@
 ** not matter if the PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias)
 ** or not.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_attach(
+SQLITE_API int sqlite3session_attach(
   sqlite3_session *pSession,      /* Session object */
   const char *zName               /* Table name */
 ){
@@ -172693,7 +174047,7 @@
 ** It is the responsibility of the caller to eventually free the buffer 
 ** using sqlite3_free().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_changeset(
+SQLITE_API int sqlite3session_changeset(
   sqlite3_session *pSession,      /* Session object */
   int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
   void **ppChangeset              /* OUT: Buffer containing changeset */
@@ -172704,7 +174058,7 @@
 /*
 ** Streaming version of sqlite3session_changeset().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_changeset_strm(
+SQLITE_API int sqlite3session_changeset_strm(
   sqlite3_session *pSession,
   int (*xOutput)(void *pOut, const void *pData, int nData),
   void *pOut
@@ -172715,7 +174069,7 @@
 /*
 ** Streaming version of sqlite3session_patchset().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_patchset_strm(
+SQLITE_API int sqlite3session_patchset_strm(
   sqlite3_session *pSession,
   int (*xOutput)(void *pOut, const void *pData, int nData),
   void *pOut
@@ -172730,7 +174084,7 @@
 ** It is the responsibility of the caller to eventually free the buffer 
 ** using sqlite3_free().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_patchset(
+SQLITE_API int sqlite3session_patchset(
   sqlite3_session *pSession,      /* Session object */
   int *pnPatchset,                /* OUT: Size of buffer at *ppChangeset */
   void **ppPatchset               /* OUT: Buffer containing changeset */
@@ -172741,7 +174095,7 @@
 /*
 ** Enable or disable the session object passed as the first argument.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_enable(sqlite3_session *pSession, int bEnable){
+SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable){
   int ret;
   sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
   if( bEnable>=0 ){
@@ -172755,7 +174109,7 @@
 /*
 ** Enable or disable the session object passed as the first argument.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_indirect(sqlite3_session *pSession, int bIndirect){
+SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect){
   int ret;
   sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
   if( bIndirect>=0 ){
@@ -172770,7 +174124,7 @@
 ** Return true if there have been no changes to monitored tables recorded
 ** by the session object passed as the only argument.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3session_isempty(sqlite3_session *pSession){
+SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession){
   int ret = 0;
   SessionTable *pTab;
 
@@ -172820,7 +174174,7 @@
 /*
 ** Create an iterator used to iterate through the contents of a changeset.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_start(
+SQLITE_API int sqlite3changeset_start(
   sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
   int nChangeset,                 /* Size of buffer pChangeset in bytes */
   void *pChangeset                /* Pointer to buffer containing changeset */
@@ -172831,7 +174185,7 @@
 /*
 ** Streaming version of sqlite3changeset_start().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_start_strm(
+SQLITE_API int sqlite3changeset_start_strm(
   sqlite3_changeset_iter **pp,    /* OUT: Changeset iterator handle */
   int (*xInput)(void *pIn, void *pData, int *pnData),
   void *pIn
@@ -173252,7 +174606,7 @@
 ** This function may not be called on iterators passed to a conflict handler
 ** callback by changeset_apply().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_next(sqlite3_changeset_iter *p){
+SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *p){
   return sessionChangesetNext(p, 0, 0);
 }
 
@@ -173261,7 +174615,7 @@
 ** from a changeset iterator. It may only be called after changeset_next()
 ** has returned SQLITE_ROW.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_op(
+SQLITE_API int sqlite3changeset_op(
   sqlite3_changeset_iter *pIter,  /* Iterator handle */
   const char **pzTab,             /* OUT: Pointer to table name */
   int *pnCol,                     /* OUT: Number of columns in table */
@@ -173281,7 +174635,7 @@
 ** to. This function may only be called after changeset_next() returns
 ** SQLITE_ROW.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_pk(
+SQLITE_API int sqlite3changeset_pk(
   sqlite3_changeset_iter *pIter,  /* Iterator object */
   unsigned char **pabPK,          /* OUT: Array of boolean - true for PK cols */
   int *pnCol                      /* OUT: Number of entries in output array */
@@ -173304,7 +174658,7 @@
 ** If value iVal is out-of-range, SQLITE_RANGE is returned and *ppValue is
 ** not modified. Otherwise, SQLITE_OK.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_old(
+SQLITE_API int sqlite3changeset_old(
   sqlite3_changeset_iter *pIter,  /* Changeset iterator */
   int iVal,                       /* Index of old.* value to retrieve */
   sqlite3_value **ppValue         /* OUT: Old value (or NULL pointer) */
@@ -173332,7 +174686,7 @@
 ** If value iVal is out-of-range, SQLITE_RANGE is returned and *ppValue is
 ** not modified. Otherwise, SQLITE_OK.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_new(
+SQLITE_API int sqlite3changeset_new(
   sqlite3_changeset_iter *pIter,  /* Changeset iterator */
   int iVal,                       /* Index of new.* value to retrieve */
   sqlite3_value **ppValue         /* OUT: New value (or NULL pointer) */
@@ -173366,7 +174720,7 @@
 ** If value iVal is out-of-range or some other error occurs, an SQLite error
 ** code is returned. Otherwise, SQLITE_OK.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_conflict(
+SQLITE_API int sqlite3changeset_conflict(
   sqlite3_changeset_iter *pIter,  /* Changeset iterator */
   int iVal,                       /* Index of conflict record value to fetch */
   sqlite3_value **ppValue         /* OUT: Value from conflicting row */
@@ -173389,7 +174743,7 @@
 **
 ** In all other cases this function returns SQLITE_MISUSE.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_fk_conflicts(
+SQLITE_API int sqlite3changeset_fk_conflicts(
   sqlite3_changeset_iter *pIter,  /* Changeset iterator */
   int *pnOut                      /* OUT: Number of FK violations */
 ){
@@ -173407,7 +174761,7 @@
 ** This function may not be called on iterators passed to a conflict handler
 ** callback by changeset_apply().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_finalize(sqlite3_changeset_iter *p){
+SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *p){
   int rc = SQLITE_OK;
   if( p ){
     int i;                        /* Used to iterate through p->apValue[] */
@@ -173581,7 +174935,7 @@
 /*
 ** Invert a changeset object.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_invert(
+SQLITE_API int sqlite3changeset_invert(
   int nChangeset,                 /* Number of bytes in input */
   const void *pChangeset,         /* Input changeset */
   int *pnInverted,                /* OUT: Number of bytes in output changeset */
@@ -173600,7 +174954,7 @@
 /*
 ** Streaming version of sqlite3changeset_invert().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_invert_strm(
+SQLITE_API int sqlite3changeset_invert_strm(
   int (*xInput)(void *pIn, void *pData, int *pnData),
   void *pIn,
   int (*xOutput)(void *pOut, const void *pData, int nData),
@@ -174480,7 +175834,7 @@
 ** attached to handle "db". Invoke the supplied conflict handler callback
 ** to resolve any conflicts encountered while applying the change.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_apply(
+SQLITE_API int sqlite3changeset_apply(
   sqlite3 *db,                    /* Apply change to "main" db of this handle */
   int nChangeset,                 /* Size of changeset in bytes */
   void *pChangeset,               /* Changeset blob */
@@ -174508,7 +175862,7 @@
 ** attached to handle "db". Invoke the supplied conflict handler callback
 ** to resolve any conflicts encountered while applying the change.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_apply_strm(
+SQLITE_API int sqlite3changeset_apply_strm(
   sqlite3 *db,                    /* Apply change to "main" db of this handle */
   int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
   void *pIn,                                          /* First arg for xInput */
@@ -174843,7 +176197,7 @@
 /*
 ** Allocate a new, empty, sqlite3_changegroup.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changegroup_new(sqlite3_changegroup **pp){
+SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp){
   int rc = SQLITE_OK;             /* Return code */
   sqlite3_changegroup *p;         /* New object */
   p = (sqlite3_changegroup*)sqlite3_malloc(sizeof(sqlite3_changegroup));
@@ -174860,7 +176214,7 @@
 ** Add the changeset currently stored in buffer pData, size nData bytes,
 ** to changeset-group p.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changegroup_add(sqlite3_changegroup *pGrp, int nData, void *pData){
+SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup *pGrp, int nData, void *pData){
   sqlite3_changeset_iter *pIter;  /* Iterator opened on pData/nData */
   int rc;                         /* Return code */
 
@@ -174876,7 +176230,7 @@
 ** Obtain a buffer containing a changeset representing the concatenation
 ** of all changesets added to the group so far.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changegroup_output(
+SQLITE_API int sqlite3changegroup_output(
     sqlite3_changegroup *pGrp,
     int *pnData,
     void **ppData
@@ -174887,7 +176241,7 @@
 /*
 ** Streaming versions of changegroup_add().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changegroup_add_strm(
+SQLITE_API int sqlite3changegroup_add_strm(
   sqlite3_changegroup *pGrp,
   int (*xInput)(void *pIn, void *pData, int *pnData),
   void *pIn
@@ -174906,7 +176260,7 @@
 /*
 ** Streaming versions of changegroup_output().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changegroup_output_strm(
+SQLITE_API int sqlite3changegroup_output_strm(
   sqlite3_changegroup *pGrp,
   int (*xOutput)(void *pOut, const void *pData, int nData), 
   void *pOut
@@ -174917,7 +176271,7 @@
 /*
 ** Delete a changegroup object.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3changegroup_delete(sqlite3_changegroup *pGrp){
+SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup *pGrp){
   if( pGrp ){
     sessionDeleteTable(pGrp->pList);
     sqlite3_free(pGrp);
@@ -174927,7 +176281,7 @@
 /* 
 ** Combine two changesets together.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_concat(
+SQLITE_API int sqlite3changeset_concat(
   int nLeft,                      /* Number of bytes in lhs input */
   void *pLeft,                    /* Lhs input changeset */
   int nRight                      /* Number of bytes in rhs input */,
@@ -174956,7 +176310,7 @@
 /*
 ** Streaming version of sqlite3changeset_concat().
 */
-SQLITE_API int SQLITE_STDCALL sqlite3changeset_concat_strm(
+SQLITE_API int sqlite3changeset_concat_strm(
   int (*xInputA)(void *pIn, void *pData, int *pnData),
   void *pInA,
   int (*xInputB)(void *pIn, void *pData, int *pnData),
@@ -177188,7 +178542,7 @@
 #ifdef _WIN32
 __declspec(dllexport)
 #endif
-SQLITE_API int SQLITE_STDCALL sqlite3_json_init(
+SQLITE_API int sqlite3_json_init(
   sqlite3 *db, 
   char **pzErrMsg, 
   const sqlite3_api_routines *pApi
@@ -178532,6 +179886,7 @@
 
 static void sqlite3Fts5ParseSetDistance(Fts5Parse*, Fts5ExprNearset*, Fts5Token*);
 static void sqlite3Fts5ParseSetColset(Fts5Parse*, Fts5ExprNearset*, Fts5Colset*);
+static Fts5Colset *sqlite3Fts5ParseColsetInvert(Fts5Parse*, Fts5Colset*);
 static void sqlite3Fts5ParseFinished(Fts5Parse *pParse, Fts5ExprNode *p);
 static void sqlite3Fts5ParseNear(Fts5Parse *pParse, Fts5Token*);
 
@@ -178589,12 +179944,13 @@
 #define FTS5_COLON                            5
 #define FTS5_LP                               6
 #define FTS5_RP                               7
-#define FTS5_LCP                              8
-#define FTS5_RCP                              9
-#define FTS5_STRING                          10
-#define FTS5_COMMA                           11
-#define FTS5_PLUS                            12
-#define FTS5_STAR                            13
+#define FTS5_MINUS                            8
+#define FTS5_LCP                              9
+#define FTS5_RCP                             10
+#define FTS5_STRING                          11
+#define FTS5_COMMA                           12
+#define FTS5_PLUS                            13
+#define FTS5_STAR                            14
 
 /*
 ** 2000-05-29
@@ -178708,17 +180064,17 @@
 #endif
 /************* Begin control #defines *****************************************/
 #define fts5YYCODETYPE unsigned char
-#define fts5YYNOCODE 27
+#define fts5YYNOCODE 28
 #define fts5YYACTIONTYPE unsigned char
 #define sqlite3Fts5ParserFTS5TOKENTYPE Fts5Token
 typedef union {
   int fts5yyinit;
   sqlite3Fts5ParserFTS5TOKENTYPE fts5yy0;
-  Fts5Colset* fts5yy3;
-  Fts5ExprPhrase* fts5yy11;
-  Fts5ExprNode* fts5yy18;
-  int fts5yy20;
-  Fts5ExprNearset* fts5yy26;
+  int fts5yy4;
+  Fts5Colset* fts5yy11;
+  Fts5ExprNode* fts5yy24;
+  Fts5ExprNearset* fts5yy46;
+  Fts5ExprPhrase* fts5yy53;
 } fts5YYMINORTYPE;
 #ifndef fts5YYSTACKDEPTH
 #define fts5YYSTACKDEPTH 100
@@ -178727,16 +180083,16 @@
 #define sqlite3Fts5ParserARG_PDECL ,Fts5Parse *pParse
 #define sqlite3Fts5ParserARG_FETCH Fts5Parse *pParse = fts5yypParser->pParse
 #define sqlite3Fts5ParserARG_STORE fts5yypParser->pParse = pParse
-#define fts5YYNSTATE             26
-#define fts5YYNRULE              24
-#define fts5YY_MAX_SHIFT         25
-#define fts5YY_MIN_SHIFTREDUCE   40
-#define fts5YY_MAX_SHIFTREDUCE   63
-#define fts5YY_MIN_REDUCE        64
-#define fts5YY_MAX_REDUCE        87
-#define fts5YY_ERROR_ACTION      88
-#define fts5YY_ACCEPT_ACTION     89
-#define fts5YY_NO_ACTION         90
+#define fts5YYNSTATE             29
+#define fts5YYNRULE              26
+#define fts5YY_MAX_SHIFT         28
+#define fts5YY_MIN_SHIFTREDUCE   45
+#define fts5YY_MAX_SHIFTREDUCE   70
+#define fts5YY_MIN_REDUCE        71
+#define fts5YY_MAX_REDUCE        96
+#define fts5YY_ERROR_ACTION      97
+#define fts5YY_ACCEPT_ACTION     98
+#define fts5YY_NO_ACTION         99
 /************* End control #defines *******************************************/
 
 /* Define the fts5yytestcase() macro to be a no-op if is not already defined
@@ -178768,7 +180124,7 @@
 **
 **   N between fts5YY_MIN_REDUCE            Reduce by rule N-fts5YY_MIN_REDUCE
 **     and fts5YY_MAX_REDUCE
-
+**
 **   N == fts5YY_ERROR_ACTION               A syntax error has occurred.
 **
 **   N == fts5YY_ACCEPT_ACTION              The parser accepts its input.
@@ -178777,16 +180133,20 @@
 **                                      slots in the fts5yy_action[] table.
 **
 ** The action table is constructed as a single large table named fts5yy_action[].
-** Given state S and lookahead X, the action is computed as
+** Given state S and lookahead X, the action is computed as either:
 **
-**      fts5yy_action[ fts5yy_shift_ofst[S] + X ]
+**    (A)   N = fts5yy_action[ fts5yy_shift_ofst[S] + X ]
+**    (B)   N = fts5yy_default[S]
 **
-** If the index value fts5yy_shift_ofst[S]+X is out of range or if the value
-** fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X or if fts5yy_shift_ofst[S]
-** is equal to fts5YY_SHIFT_USE_DFLT, it means that the action is not in the table
-** and that fts5yy_default[S] should be used instead.  
+** The (A) formula is preferred.  The B formula is used instead if:
+**    (1)  The fts5yy_shift_ofst[S]+X value is out of range, or
+**    (2)  fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X, or
+**    (3)  fts5yy_shift_ofst[S] equal fts5YY_SHIFT_USE_DFLT.
+** (Implementation note: fts5YY_SHIFT_USE_DFLT is chosen so that
+** fts5YY_SHIFT_USE_DFLT+X will be out of range for all possible lookaheads X.
+** Hence only tests (1) and (2) need to be evaluated.)
 **
-** The formula above is for computing the action when the lookahead is
+** The formulas above are for computing the action when the lookahead is
 ** a terminal symbol.  If the lookahead is a non-terminal (as occurs after
 ** a reduce action) then the fts5yy_reduce_ofst[] array is used in place of
 ** the fts5yy_shift_ofst[] array and fts5YY_REDUCE_USE_DFLT is used in place of
@@ -178804,48 +180164,50 @@
 **  fts5yy_default[]       Default action for each state.
 **
 *********** Begin parsing tables **********************************************/
-#define fts5YY_ACTTAB_COUNT (78)
+#define fts5YY_ACTTAB_COUNT (85)
 static const fts5YYACTIONTYPE fts5yy_action[] = {
- /*     0 */    89,   15,   46,    5,   48,   24,   12,   19,   23,   14,
- /*    10 */    46,    5,   48,   24,   20,   21,   23,   43,   46,    5,
- /*    20 */    48,   24,    6,   18,   23,   17,   46,    5,   48,   24,
- /*    30 */    75,    7,   23,   25,   46,    5,   48,   24,   62,   47,
- /*    40 */    23,   48,   24,    7,   11,   23,    9,    3,    4,    2,
- /*    50 */    62,   50,   52,   44,   64,    3,    4,    2,   49,    4,
- /*    60 */     2,    1,   23,   11,   16,    9,   12,    2,   10,   61,
- /*    70 */    53,   59,   62,   60,   22,   13,   55,    8,
+ /*     0 */    98,   16,   51,    5,   53,   27,   83,    7,   26,   15,
+ /*    10 */    51,    5,   53,   27,   13,   69,   26,   48,   51,    5,
+ /*    20 */    53,   27,   19,   11,   26,    9,   20,   51,    5,   53,
+ /*    30 */    27,   13,   22,   26,   28,   51,    5,   53,   27,   68,
+ /*    40 */     1,   26,   19,   11,   17,    9,   52,   10,   53,   27,
+ /*    50 */    23,   24,   26,   54,    3,    4,    2,   26,    6,   21,
+ /*    60 */    49,   71,    3,    4,    2,    7,   56,   59,   55,   59,
+ /*    70 */     4,    2,   12,   69,   58,   60,   18,   67,   62,   69,
+ /*    80 */    25,   66,    8,   14,    2,
 };
 static const fts5YYCODETYPE fts5yy_lookahead[] = {
- /*     0 */    15,   16,   17,   18,   19,   20,   10,   11,   23,   16,
- /*    10 */    17,   18,   19,   20,   23,   24,   23,   16,   17,   18,
- /*    20 */    19,   20,   22,   23,   23,   16,   17,   18,   19,   20,
- /*    30 */     5,    6,   23,   16,   17,   18,   19,   20,   13,   17,
- /*    40 */    23,   19,   20,    6,    8,   23,   10,    1,    2,    3,
- /*    50 */    13,    9,   10,    7,    0,    1,    2,    3,   19,    2,
- /*    60 */     3,    6,   23,    8,   21,   10,   10,    3,   10,   25,
- /*    70 */    10,   10,   13,   25,   12,   10,    7,    5,
+ /*     0 */    16,   17,   18,   19,   20,   21,    5,    6,   24,   17,
+ /*    10 */    18,   19,   20,   21,   11,   14,   24,   17,   18,   19,
+ /*    20 */    20,   21,    8,    9,   24,   11,   17,   18,   19,   20,
+ /*    30 */    21,   11,   12,   24,   17,   18,   19,   20,   21,   26,
+ /*    40 */     6,   24,    8,    9,   22,   11,   18,   11,   20,   21,
+ /*    50 */    24,   25,   24,   20,    1,    2,    3,   24,   23,   24,
+ /*    60 */     7,    0,    1,    2,    3,    6,   10,   11,   10,   11,
+ /*    70 */     2,    3,    9,   14,   11,   11,   22,   26,    7,   14,
+ /*    80 */    13,   11,    5,   11,    3,
 };
-#define fts5YY_SHIFT_USE_DFLT (-5)
-#define fts5YY_SHIFT_COUNT (25)
-#define fts5YY_SHIFT_MIN   (-4)
-#define fts5YY_SHIFT_MAX   (72)
-static const signed char fts5yy_shift_ofst[] = {
- /*     0 */    55,   55,   55,   55,   55,   36,   -4,   56,   58,   25,
- /*    10 */    37,   60,   59,   59,   46,   54,   42,   57,   62,   61,
- /*    20 */    62,   69,   65,   62,   72,   64,
+#define fts5YY_SHIFT_USE_DFLT (85)
+#define fts5YY_SHIFT_COUNT    (28)
+#define fts5YY_SHIFT_MIN      (0)
+#define fts5YY_SHIFT_MAX      (81)
+static const unsigned char fts5yy_shift_ofst[] = {
+ /*     0 */    34,   34,   34,   34,   34,   14,   20,    3,   36,    1,
+ /*    10 */    59,   64,   64,   65,   65,   53,   61,   56,   58,   63,
+ /*    20 */    68,   67,   70,   67,   71,   72,   67,   77,   81,
 };
-#define fts5YY_REDUCE_USE_DFLT (-16)
-#define fts5YY_REDUCE_COUNT (13)
-#define fts5YY_REDUCE_MIN   (-15)
-#define fts5YY_REDUCE_MAX   (48)
+#define fts5YY_REDUCE_USE_DFLT (-17)
+#define fts5YY_REDUCE_COUNT (14)
+#define fts5YY_REDUCE_MIN   (-16)
+#define fts5YY_REDUCE_MAX   (54)
 static const signed char fts5yy_reduce_ofst[] = {
- /*     0 */   -15,   -7,    1,    9,   17,   22,   -9,    0,   39,   44,
- /*    10 */    44,   43,   44,   48,
+ /*     0 */   -16,   -8,    0,    9,   17,   28,   26,   35,   33,   13,
+ /*    10 */    13,   22,   54,   13,   51,
 };
 static const fts5YYACTIONTYPE fts5yy_default[] = {
- /*     0 */    88,   88,   88,   88,   88,   69,   82,   88,   88,   87,
- /*    10 */    87,   88,   87,   87,   88,   88,   88,   66,   80,   88,
- /*    20 */    81,   88,   88,   78,   88,   65,
+ /*     0 */    97,   97,   97,   97,   97,   76,   91,   97,   97,   96,
+ /*    10 */    96,   97,   97,   96,   96,   97,   97,   97,   97,   97,
+ /*    20 */    73,   89,   97,   90,   97,   97,   87,   97,   72,
 };
 /********** End of lemon-generated parsing tables *****************************/
 
@@ -178952,11 +180314,11 @@
 static const char *const fts5yyTokenName[] = { 
   "$",             "OR",            "AND",           "NOT",         
   "TERM",          "COLON",         "LP",            "RP",          
-  "LCP",           "RCP",           "STRING",        "COMMA",       
-  "PLUS",          "STAR",          "error",         "input",       
-  "expr",          "cnearset",      "exprlist",      "nearset",     
-  "colset",        "colsetlist",    "nearphrases",   "phrase",      
-  "neardist_opt",  "star_opt",    
+  "MINUS",         "LCP",           "RCP",           "STRING",      
+  "COMMA",         "PLUS",          "STAR",          "error",       
+  "input",         "expr",          "cnearset",      "exprlist",    
+  "nearset",       "colset",        "colsetlist",    "nearphrases", 
+  "phrase",        "neardist_opt",  "star_opt",    
 };
 #endif /* NDEBUG */
 
@@ -178974,20 +180336,22 @@
  /*   7 */ "exprlist ::= exprlist cnearset",
  /*   8 */ "cnearset ::= nearset",
  /*   9 */ "cnearset ::= colset COLON nearset",
- /*  10 */ "colset ::= LCP colsetlist RCP",
- /*  11 */ "colset ::= STRING",
- /*  12 */ "colsetlist ::= colsetlist STRING",
- /*  13 */ "colsetlist ::= STRING",
- /*  14 */ "nearset ::= phrase",
- /*  15 */ "nearset ::= STRING LP nearphrases neardist_opt RP",
- /*  16 */ "nearphrases ::= phrase",
- /*  17 */ "nearphrases ::= nearphrases phrase",
- /*  18 */ "neardist_opt ::=",
- /*  19 */ "neardist_opt ::= COMMA STRING",
- /*  20 */ "phrase ::= phrase PLUS STRING star_opt",
- /*  21 */ "phrase ::= STRING star_opt",
- /*  22 */ "star_opt ::= STAR",
- /*  23 */ "star_opt ::=",
+ /*  10 */ "colset ::= MINUS LCP colsetlist RCP",
+ /*  11 */ "colset ::= LCP colsetlist RCP",
+ /*  12 */ "colset ::= STRING",
+ /*  13 */ "colset ::= MINUS STRING",
+ /*  14 */ "colsetlist ::= colsetlist STRING",
+ /*  15 */ "colsetlist ::= STRING",
+ /*  16 */ "nearset ::= phrase",
+ /*  17 */ "nearset ::= STRING LP nearphrases neardist_opt RP",
+ /*  18 */ "nearphrases ::= phrase",
+ /*  19 */ "nearphrases ::= nearphrases phrase",
+ /*  20 */ "neardist_opt ::=",
+ /*  21 */ "neardist_opt ::= COMMA STRING",
+ /*  22 */ "phrase ::= phrase PLUS STRING star_opt",
+ /*  23 */ "phrase ::= STRING star_opt",
+ /*  24 */ "star_opt ::= STAR",
+ /*  25 */ "star_opt ::=",
 };
 #endif /* NDEBUG */
 
@@ -179097,33 +180461,33 @@
     ** inside the C code.
     */
 /********* Begin destructor definitions ***************************************/
-    case 15: /* input */
+    case 16: /* input */
 {
  (void)pParse; 
 }
       break;
-    case 16: /* expr */
-    case 17: /* cnearset */
-    case 18: /* exprlist */
+    case 17: /* expr */
+    case 18: /* cnearset */
+    case 19: /* exprlist */
 {
- sqlite3Fts5ParseNodeFree((fts5yypminor->fts5yy18)); 
+ sqlite3Fts5ParseNodeFree((fts5yypminor->fts5yy24)); 
 }
       break;
-    case 19: /* nearset */
-    case 22: /* nearphrases */
+    case 20: /* nearset */
+    case 23: /* nearphrases */
 {
- sqlite3Fts5ParseNearsetFree((fts5yypminor->fts5yy26)); 
+ sqlite3Fts5ParseNearsetFree((fts5yypminor->fts5yy46)); 
 }
       break;
-    case 20: /* colset */
-    case 21: /* colsetlist */
+    case 21: /* colset */
+    case 22: /* colsetlist */
 {
- sqlite3_free((fts5yypminor->fts5yy3)); 
+ sqlite3_free((fts5yypminor->fts5yy11)); 
 }
       break;
-    case 23: /* phrase */
+    case 24: /* phrase */
 {
- sqlite3Fts5ParsePhraseFree((fts5yypminor->fts5yy11)); 
+ sqlite3Fts5ParsePhraseFree((fts5yypminor->fts5yy53)); 
 }
       break;
 /********* End destructor definitions *****************************************/
@@ -179200,50 +180564,47 @@
   assert( stateno <= fts5YY_SHIFT_COUNT );
   do{
     i = fts5yy_shift_ofst[stateno];
-    if( i==fts5YY_SHIFT_USE_DFLT ) return fts5yy_default[stateno];
     assert( iLookAhead!=fts5YYNOCODE );
     i += iLookAhead;
     if( i<0 || i>=fts5YY_ACTTAB_COUNT || fts5yy_lookahead[i]!=iLookAhead ){
-      if( iLookAhead>0 ){
 #ifdef fts5YYFALLBACK
-        fts5YYCODETYPE iFallback;            /* Fallback token */
-        if( iLookAhead<sizeof(fts5yyFallback)/sizeof(fts5yyFallback[0])
-               && (iFallback = fts5yyFallback[iLookAhead])!=0 ){
+      fts5YYCODETYPE iFallback;            /* Fallback token */
+      if( iLookAhead<sizeof(fts5yyFallback)/sizeof(fts5yyFallback[0])
+             && (iFallback = fts5yyFallback[iLookAhead])!=0 ){
 #ifndef NDEBUG
-          if( fts5yyTraceFILE ){
-            fprintf(fts5yyTraceFILE, "%sFALLBACK %s => %s\n",
-               fts5yyTracePrompt, fts5yyTokenName[iLookAhead], fts5yyTokenName[iFallback]);
-          }
-#endif
-          assert( fts5yyFallback[iFallback]==0 ); /* Fallback loop must terminate */
-          iLookAhead = iFallback;
-          continue;
+        if( fts5yyTraceFILE ){
+          fprintf(fts5yyTraceFILE, "%sFALLBACK %s => %s\n",
+             fts5yyTracePrompt, fts5yyTokenName[iLookAhead], fts5yyTokenName[iFallback]);
         }
 #endif
+        assert( fts5yyFallback[iFallback]==0 ); /* Fallback loop must terminate */
+        iLookAhead = iFallback;
+        continue;
+      }
+#endif
 #ifdef fts5YYWILDCARD
-        {
-          int j = i - iLookAhead + fts5YYWILDCARD;
-          if( 
+      {
+        int j = i - iLookAhead + fts5YYWILDCARD;
+        if( 
 #if fts5YY_SHIFT_MIN+fts5YYWILDCARD<0
-            j>=0 &&
+          j>=0 &&
 #endif
 #if fts5YY_SHIFT_MAX+fts5YYWILDCARD>=fts5YY_ACTTAB_COUNT
-            j<fts5YY_ACTTAB_COUNT &&
+          j<fts5YY_ACTTAB_COUNT &&
 #endif
-            fts5yy_lookahead[j]==fts5YYWILDCARD
-          ){
+          fts5yy_lookahead[j]==fts5YYWILDCARD && iLookAhead>0
+        ){
 #ifndef NDEBUG
-            if( fts5yyTraceFILE ){
-              fprintf(fts5yyTraceFILE, "%sWILDCARD %s => %s\n",
-                 fts5yyTracePrompt, fts5yyTokenName[iLookAhead],
-                 fts5yyTokenName[fts5YYWILDCARD]);
-            }
-#endif /* NDEBUG */
-            return fts5yy_action[j];
+          if( fts5yyTraceFILE ){
+            fprintf(fts5yyTraceFILE, "%sWILDCARD %s => %s\n",
+               fts5yyTracePrompt, fts5yyTokenName[iLookAhead],
+               fts5yyTokenName[fts5YYWILDCARD]);
           }
+#endif /* NDEBUG */
+          return fts5yy_action[j];
         }
-#endif /* fts5YYWILDCARD */
       }
+#endif /* fts5YYWILDCARD */
       return fts5yy_default[stateno];
     }else{
       return fts5yy_action[i];
@@ -179370,30 +180731,32 @@
   fts5YYCODETYPE lhs;         /* Symbol on the left-hand side of the rule */
   unsigned char nrhs;     /* Number of right-hand side symbols in the rule */
 } fts5yyRuleInfo[] = {
-  { 15, 1 },
-  { 16, 3 },
-  { 16, 3 },
-  { 16, 3 },
-  { 16, 3 },
   { 16, 1 },
-  { 18, 1 },
-  { 18, 2 },
-  { 17, 1 },
   { 17, 3 },
-  { 20, 3 },
-  { 20, 1 },
-  { 21, 2 },
-  { 21, 1 },
+  { 17, 3 },
+  { 17, 3 },
+  { 17, 3 },
+  { 17, 1 },
   { 19, 1 },
-  { 19, 5 },
-  { 22, 1 },
+  { 19, 2 },
+  { 18, 1 },
+  { 18, 3 },
+  { 21, 4 },
+  { 21, 3 },
+  { 21, 1 },
+  { 21, 2 },
   { 22, 2 },
-  { 24, 0 },
-  { 24, 2 },
-  { 23, 4 },
+  { 22, 1 },
+  { 20, 1 },
+  { 20, 5 },
+  { 23, 1 },
   { 23, 2 },
-  { 25, 1 },
   { 25, 0 },
+  { 25, 2 },
+  { 24, 4 },
+  { 24, 2 },
+  { 26, 1 },
+  { 26, 0 },
 };
 
 static void fts5yy_accept(fts5yyParser*);  /* Forward Declaration */
@@ -179458,120 +180821,131 @@
 /********** Begin reduce actions **********************************************/
         fts5YYMINORTYPE fts5yylhsminor;
       case 0: /* input ::= expr */
-{ sqlite3Fts5ParseFinished(pParse, fts5yymsp[0].minor.fts5yy18); }
+{ sqlite3Fts5ParseFinished(pParse, fts5yymsp[0].minor.fts5yy24); }
         break;
       case 1: /* expr ::= expr AND expr */
 {
-  fts5yylhsminor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_AND, fts5yymsp[-2].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+  fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_AND, fts5yymsp[-2].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24, 0);
 }
-  fts5yymsp[-2].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+  fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
       case 2: /* expr ::= expr OR expr */
 {
-  fts5yylhsminor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_OR, fts5yymsp[-2].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+  fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_OR, fts5yymsp[-2].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24, 0);
 }
-  fts5yymsp[-2].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+  fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
       case 3: /* expr ::= expr NOT expr */
 {
-  fts5yylhsminor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_NOT, fts5yymsp[-2].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+  fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_NOT, fts5yymsp[-2].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24, 0);
 }
-  fts5yymsp[-2].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+  fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
       case 4: /* expr ::= LP expr RP */
-{fts5yymsp[-2].minor.fts5yy18 = fts5yymsp[-1].minor.fts5yy18;}
+{fts5yymsp[-2].minor.fts5yy24 = fts5yymsp[-1].minor.fts5yy24;}
         break;
       case 5: /* expr ::= exprlist */
       case 6: /* exprlist ::= cnearset */ fts5yytestcase(fts5yyruleno==6);
-{fts5yylhsminor.fts5yy18 = fts5yymsp[0].minor.fts5yy18;}
-  fts5yymsp[0].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+{fts5yylhsminor.fts5yy24 = fts5yymsp[0].minor.fts5yy24;}
+  fts5yymsp[0].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
       case 7: /* exprlist ::= exprlist cnearset */
 {
-  fts5yylhsminor.fts5yy18 = sqlite3Fts5ParseImplicitAnd(pParse, fts5yymsp[-1].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18);
+  fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseImplicitAnd(pParse, fts5yymsp[-1].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24);
 }
-  fts5yymsp[-1].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+  fts5yymsp[-1].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
       case 8: /* cnearset ::= nearset */
 { 
-  fts5yylhsminor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy26); 
+  fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy46); 
 }
-  fts5yymsp[0].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+  fts5yymsp[0].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
       case 9: /* cnearset ::= colset COLON nearset */
 { 
-  sqlite3Fts5ParseSetColset(pParse, fts5yymsp[0].minor.fts5yy26, fts5yymsp[-2].minor.fts5yy3);
-  fts5yylhsminor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy26); 
+  sqlite3Fts5ParseSetColset(pParse, fts5yymsp[0].minor.fts5yy46, fts5yymsp[-2].minor.fts5yy11);
+  fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy46); 
 }
-  fts5yymsp[-2].minor.fts5yy18 = fts5yylhsminor.fts5yy18;
+  fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24;
         break;
-      case 10: /* colset ::= LCP colsetlist RCP */
-{ fts5yymsp[-2].minor.fts5yy3 = fts5yymsp[-1].minor.fts5yy3; }
+      case 10: /* colset ::= MINUS LCP colsetlist RCP */
+{ 
+    fts5yymsp[-3].minor.fts5yy11 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy11);
+}
         break;
-      case 11: /* colset ::= STRING */
+      case 11: /* colset ::= LCP colsetlist RCP */
+{ fts5yymsp[-2].minor.fts5yy11 = fts5yymsp[-1].minor.fts5yy11; }
+        break;
+      case 12: /* colset ::= STRING */
 {
-  fts5yylhsminor.fts5yy3 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
+  fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
 }
-  fts5yymsp[0].minor.fts5yy3 = fts5yylhsminor.fts5yy3;
+  fts5yymsp[0].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
         break;
-      case 12: /* colsetlist ::= colsetlist STRING */
+      case 13: /* colset ::= MINUS STRING */
+{
+  fts5yymsp[-1].minor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
+  fts5yymsp[-1].minor.fts5yy11 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy11);
+}
+        break;
+      case 14: /* colsetlist ::= colsetlist STRING */
 { 
-  fts5yylhsminor.fts5yy3 = sqlite3Fts5ParseColset(pParse, fts5yymsp[-1].minor.fts5yy3, &fts5yymsp[0].minor.fts5yy0); }
-  fts5yymsp[-1].minor.fts5yy3 = fts5yylhsminor.fts5yy3;
+  fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, fts5yymsp[-1].minor.fts5yy11, &fts5yymsp[0].minor.fts5yy0); }
+  fts5yymsp[-1].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
         break;
-      case 13: /* colsetlist ::= STRING */
+      case 15: /* colsetlist ::= STRING */
 { 
-  fts5yylhsminor.fts5yy3 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); 
+  fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); 
 }
-  fts5yymsp[0].minor.fts5yy3 = fts5yylhsminor.fts5yy3;
+  fts5yymsp[0].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
         break;
-      case 14: /* nearset ::= phrase */
-{ fts5yylhsminor.fts5yy26 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11); }
-  fts5yymsp[0].minor.fts5yy26 = fts5yylhsminor.fts5yy26;
+      case 16: /* nearset ::= phrase */
+{ fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); }
+  fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46;
         break;
-      case 15: /* nearset ::= STRING LP nearphrases neardist_opt RP */
+      case 17: /* nearset ::= STRING LP nearphrases neardist_opt RP */
 {
   sqlite3Fts5ParseNear(pParse, &fts5yymsp[-4].minor.fts5yy0);
-  sqlite3Fts5ParseSetDistance(pParse, fts5yymsp[-2].minor.fts5yy26, &fts5yymsp[-1].minor.fts5yy0);
-  fts5yylhsminor.fts5yy26 = fts5yymsp[-2].minor.fts5yy26;
+  sqlite3Fts5ParseSetDistance(pParse, fts5yymsp[-2].minor.fts5yy46, &fts5yymsp[-1].minor.fts5yy0);
+  fts5yylhsminor.fts5yy46 = fts5yymsp[-2].minor.fts5yy46;
 }
-  fts5yymsp[-4].minor.fts5yy26 = fts5yylhsminor.fts5yy26;
+  fts5yymsp[-4].minor.fts5yy46 = fts5yylhsminor.fts5yy46;
         break;
-      case 16: /* nearphrases ::= phrase */
+      case 18: /* nearphrases ::= phrase */
 { 
-  fts5yylhsminor.fts5yy26 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11); 
+  fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); 
 }
-  fts5yymsp[0].minor.fts5yy26 = fts5yylhsminor.fts5yy26;
+  fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46;
         break;
-      case 17: /* nearphrases ::= nearphrases phrase */
+      case 19: /* nearphrases ::= nearphrases phrase */
 {
-  fts5yylhsminor.fts5yy26 = sqlite3Fts5ParseNearset(pParse, fts5yymsp[-1].minor.fts5yy26, fts5yymsp[0].minor.fts5yy11);
+  fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, fts5yymsp[-1].minor.fts5yy46, fts5yymsp[0].minor.fts5yy53);
 }
-  fts5yymsp[-1].minor.fts5yy26 = fts5yylhsminor.fts5yy26;
+  fts5yymsp[-1].minor.fts5yy46 = fts5yylhsminor.fts5yy46;
         break;
-      case 18: /* neardist_opt ::= */
+      case 20: /* neardist_opt ::= */
 { fts5yymsp[1].minor.fts5yy0.p = 0; fts5yymsp[1].minor.fts5yy0.n = 0; }
         break;
-      case 19: /* neardist_opt ::= COMMA STRING */
+      case 21: /* neardist_opt ::= COMMA STRING */
 { fts5yymsp[-1].minor.fts5yy0 = fts5yymsp[0].minor.fts5yy0; }
         break;
-      case 20: /* phrase ::= phrase PLUS STRING star_opt */
+      case 22: /* phrase ::= phrase PLUS STRING star_opt */
 { 
-  fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseTerm(pParse, fts5yymsp[-3].minor.fts5yy11, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy20);
+  fts5yylhsminor.fts5yy53 = sqlite3Fts5ParseTerm(pParse, fts5yymsp[-3].minor.fts5yy53, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4);
 }
-  fts5yymsp[-3].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
+  fts5yymsp[-3].minor.fts5yy53 = fts5yylhsminor.fts5yy53;
         break;
-      case 21: /* phrase ::= STRING star_opt */
+      case 23: /* phrase ::= STRING star_opt */
 { 
-  fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseTerm(pParse, 0, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy20);
+  fts5yylhsminor.fts5yy53 = sqlite3Fts5ParseTerm(pParse, 0, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4);
 }
-  fts5yymsp[-1].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
+  fts5yymsp[-1].minor.fts5yy53 = fts5yylhsminor.fts5yy53;
         break;
-      case 22: /* star_opt ::= STAR */
-{ fts5yymsp[0].minor.fts5yy20 = 1; }
+      case 24: /* star_opt ::= STAR */
+{ fts5yymsp[0].minor.fts5yy4 = 1; }
         break;
-      case 23: /* star_opt ::= */
-{ fts5yymsp[1].minor.fts5yy20 = 0; }
+      case 25: /* star_opt ::= */
+{ fts5yymsp[1].minor.fts5yy4 = 0; }
         break;
       default:
         break;
@@ -179765,7 +181139,7 @@
         fts5yy_destructor(fts5yypParser, (fts5YYCODETYPE)fts5yymajor, &fts5yyminorunion);
         fts5yymajor = fts5YYNOCODE;
       }else{
-        while( fts5yypParser->fts5yytos >= &fts5yypParser->fts5yystack
+        while( fts5yypParser->fts5yytos >= fts5yypParser->fts5yystack
             && fts5yymx != fts5YYERRORSYMBOL
             && (fts5yyact = fts5yy_find_reduce_action(
                         fts5yypParser->fts5yytos->stateno,
@@ -180029,7 +181403,7 @@
   if( p->iRangeEnd>0 && iPos==p->iRangeEnd ){
     fts5HighlightAppend(&rc, p, &p->zIn[p->iOff], iEndOff - p->iOff);
     p->iOff = iEndOff;
-    if( iPos<p->iter.iEnd ){
+    if( iPos>=p->iter.iStart && iPos<p->iter.iEnd ){
       fts5HighlightAppend(&rc, p, p->zClose, -1);
     }
   }
@@ -180087,6 +181461,118 @@
 **************************************************************************/
 
 /*
+** Context object passed to the fts5SentenceFinderCb() function.
+*/
+typedef struct Fts5SFinder Fts5SFinder;
+struct Fts5SFinder {
+  int iPos;                       /* Current token position */
+  int nFirstAlloc;                /* Allocated size of aFirst[] */
+  int nFirst;                     /* Number of entries in aFirst[] */
+  int *aFirst;                    /* Array of first token in each sentence */
+  const char *zDoc;               /* Document being tokenized */
+};
+
+/*
+** Add an entry to the Fts5SFinder.aFirst[] array. Grow the array if
+** necessary. Return SQLITE_OK if successful, or SQLITE_NOMEM if an
+** error occurs.
+*/
+static int fts5SentenceFinderAdd(Fts5SFinder *p, int iAdd){
+  if( p->nFirstAlloc==p->nFirst ){
+    int nNew = p->nFirstAlloc ? p->nFirstAlloc*2 : 64;
+    int *aNew;
+
+    aNew = (int*)sqlite3_realloc(p->aFirst, nNew*sizeof(int));
+    if( aNew==0 ) return SQLITE_NOMEM;
+    p->aFirst = aNew;
+    p->nFirstAlloc = nNew;
+  }
+  p->aFirst[p->nFirst++] = iAdd;
+  return SQLITE_OK;
+}
+
+/*
+** This function is an xTokenize() callback used by the auxiliary snippet()
+** function. Its job is to identify tokens that are the first in a sentence.
+** For each such token, an entry is added to the SFinder.aFirst[] array.
+*/
+static int fts5SentenceFinderCb(
+  void *pContext,                 /* Pointer to HighlightContext object */
+  int tflags,                     /* Mask of FTS5_TOKEN_* flags */
+  const char *pToken,             /* Buffer containing token */
+  int nToken,                     /* Size of token in bytes */
+  int iStartOff,                  /* Start offset of token */
+  int iEndOff                     /* End offset of token */
+){
+  int rc = SQLITE_OK;
+
+  UNUSED_PARAM2(pToken, nToken);
+  UNUSED_PARAM(iEndOff);
+
+  if( (tflags & FTS5_TOKEN_COLOCATED)==0 ){
+    Fts5SFinder *p = (Fts5SFinder*)pContext;
+    if( p->iPos>0 ){
+      int i;
+      char c = 0;
+      for(i=iStartOff-1; i>=0; i--){
+        c = p->zDoc[i];
+        if( c!=' ' && c!='\t' && c!='\n' && c!='\r' ) break;
+      }
+      if( i!=iStartOff-1 && (c=='.' || c==':') ){
+        rc = fts5SentenceFinderAdd(p, p->iPos);
+      }
+    }else{
+      rc = fts5SentenceFinderAdd(p, 0);
+    }
+    p->iPos++;
+  }
+  return rc;
+}
+
+static int fts5SnippetScore(
+  const Fts5ExtensionApi *pApi,   /* API offered by current FTS version */
+  Fts5Context *pFts,              /* First arg to pass to pApi functions */
+  int nDocsize,                   /* Size of column in tokens */
+  unsigned char *aSeen,           /* Array with one element per query phrase */
+  int iCol,                       /* Column to score */
+  int iPos,                       /* Starting offset to score */
+  int nToken,                     /* Max tokens per snippet */
+  int *pnScore,                   /* OUT: Score */
+  int *piPos                      /* OUT: Adjusted offset */
+){
+  int rc;
+  int i;
+  int ip = 0;
+  int ic = 0;
+  int iOff = 0;
+  int iFirst = -1;
+  int nInst;
+  int nScore = 0;
+  int iLast = 0;
+
+  rc = pApi->xInstCount(pFts, &nInst);
+  for(i=0; i<nInst && rc==SQLITE_OK; i++){
+    rc = pApi->xInst(pFts, i, &ip, &ic, &iOff);
+    if( rc==SQLITE_OK && ic==iCol && iOff>=iPos && iOff<(iPos+nToken) ){
+      nScore += (aSeen[ip] ? 1 : 1000);
+      aSeen[ip] = 1;
+      if( iFirst<0 ) iFirst = iOff;
+      iLast = iOff + pApi->xPhraseSize(pFts, ip);
+    }
+  }
+
+  *pnScore = nScore;
+  if( piPos ){
+    int iAdj = iFirst - (nToken - (iLast-iFirst)) / 2;
+    if( (iAdj+nToken)>nDocsize ) iAdj = nDocsize - nToken;
+    if( iAdj<0 ) iAdj = 0;
+    *piPos = iAdj;
+  }
+
+  return rc;
+}
+
+/*
 ** Implementation of snippet() function.
 */
 static void fts5SnippetFunction(
@@ -180107,89 +181593,119 @@
   unsigned char *aSeen;           /* Array of "seen instance" flags */
   int iBestCol;                   /* Column containing best snippet */
   int iBestStart = 0;             /* First token of best snippet */
-  int iBestLast;                  /* Last token of best snippet */
   int nBestScore = 0;             /* Score of best snippet */
   int nColSize = 0;               /* Total size of iBestCol in tokens */
+  Fts5SFinder sFinder;            /* Used to find the beginnings of sentences */
+  int nCol;
 
   if( nVal!=5 ){
     const char *zErr = "wrong number of arguments to function snippet()";
     sqlite3_result_error(pCtx, zErr, -1);
     return;
   }
 
+  nCol = pApi->xColumnCount(pFts);
   memset(&ctx, 0, sizeof(HighlightContext));
   iCol = sqlite3_value_int(apVal[0]);
   ctx.zOpen = (const char*)sqlite3_value_text(apVal[1]);
   ctx.zClose = (const char*)sqlite3_value_text(apVal[2]);
   zEllips = (const char*)sqlite3_value_text(apVal[3]);
   nToken = sqlite3_value_int(apVal[4]);
-  iBestLast = nToken-1;
 
   iBestCol = (iCol>=0 ? iCol : 0);
   nPhrase = pApi->xPhraseCount(pFts);
   aSeen = sqlite3_malloc(nPhrase);
   if( aSeen==0 ){
     rc = SQLITE_NOMEM;
   }
-
   if( rc==SQLITE_OK ){
     rc = pApi->xInstCount(pFts, &nInst);
   }
-  for(i=0; rc==SQLITE_OK && i<nInst; i++){
-    int ip, iSnippetCol, iStart;
-    memset(aSeen, 0, nPhrase);
-    rc = pApi->xInst(pFts, i, &ip, &iSnippetCol, &iStart);
-    if( rc==SQLITE_OK && (iCol<0 || iSnippetCol==iCol) ){
-      int nScore = 1000;
-      int iLast = iStart - 1 + pApi->xPhraseSize(pFts, ip);
-      int j;
-      aSeen[ip] = 1;
 
-      for(j=i+1; rc==SQLITE_OK && j<nInst; j++){
-        int ic; int io; int iFinal;
-        rc = pApi->xInst(pFts, j, &ip, &ic, &io);
-        iFinal = io + pApi->xPhraseSize(pFts, ip) - 1;
-        if( rc==SQLITE_OK && ic==iSnippetCol && iLast<iStart+nToken ){
-          nScore += aSeen[ip] ? 1000 : 1;
-          aSeen[ip] = 1;
-          if( iFinal>iLast ) iLast = iFinal;
+  memset(&sFinder, 0, sizeof(Fts5SFinder));
+  for(i=0; i<nCol; i++){
+    if( iCol<0 || iCol==i ){
+      int nDoc;
+      int nDocsize;
+      int ii;
+      sFinder.iPos = 0;
+      sFinder.nFirst = 0;
+      rc = pApi->xColumnText(pFts, i, &sFinder.zDoc, &nDoc);
+      if( rc!=SQLITE_OK ) break;
+      rc = pApi->xTokenize(pFts, 
+          sFinder.zDoc, nDoc, (void*)&sFinder,fts5SentenceFinderCb
+      );
+      if( rc!=SQLITE_OK ) break;
+      rc = pApi->xColumnSize(pFts, i, &nDocsize);
+      if( rc!=SQLITE_OK ) break;
+
+      for(ii=0; rc==SQLITE_OK && ii<nInst; ii++){
+        int ip, ic, io;
+        int iAdj;
+        int nScore;
+        int jj;
+
+        rc = pApi->xInst(pFts, ii, &ip, &ic, &io);
+        if( ic!=i || rc!=SQLITE_OK ) continue;
+        memset(aSeen, 0, nPhrase);
+        rc = fts5SnippetScore(pApi, pFts, nDocsize, aSeen, i,
+            io, nToken, &nScore, &iAdj
+        );
+        if( rc==SQLITE_OK && nScore>nBestScore ){
+          nBestScore = nScore;
+          iBestCol = i;
+          iBestStart = iAdj;
+          nColSize = nDocsize;
         }
-      }
 
-      if( rc==SQLITE_OK && nScore>nBestScore ){
-        iBestCol = iSnippetCol;
-        iBestStart = iStart;
-        iBestLast = iLast;
-        nBestScore = nScore;
+        if( rc==SQLITE_OK && sFinder.nFirst && nDocsize>nToken ){
+          for(jj=0; jj<(sFinder.nFirst-1); jj++){
+            if( sFinder.aFirst[jj+1]>io ) break;
+          }
+
+          if( sFinder.aFirst[jj]<io ){
+            memset(aSeen, 0, nPhrase);
+            rc = fts5SnippetScore(pApi, pFts, nDocsize, aSeen, i, 
+              sFinder.aFirst[jj], nToken, &nScore, 0
+            );
+
+            nScore += (sFinder.aFirst[jj]==0 ? 120 : 100);
+            if( rc==SQLITE_OK && nScore>nBestScore ){
+              nBestScore = nScore;
+              iBestCol = i;
+              iBestStart = sFinder.aFirst[jj];
+              nColSize = nDocsize;
+            }
+          }
+        }
       }
     }
   }
 
   if( rc==SQLITE_OK ){
-    rc = pApi->xColumnSize(pFts, iBestCol, &nColSize);
-  }
-  if( rc==SQLITE_OK ){
     rc = pApi->xColumnText(pFts, iBestCol, &ctx.zIn, &ctx.nIn);
   }
+  if( rc==SQLITE_OK && nColSize==0 ){
+    rc = pApi->xColumnSize(pFts, iBestCol, &nColSize);
+  }
   if( ctx.zIn ){
     if( rc==SQLITE_OK ){
       rc = fts5CInstIterInit(pApi, pFts, iBestCol, &ctx.iter);
     }
 
-    if( (iBestStart+nToken-1)>iBestLast ){
-      iBestStart -= (iBestStart+nToken-1-iBestLast) / 2;
-    }
-    if( iBestStart+nToken>nColSize ){
-      iBestStart = nColSize - nToken;
-    }
-    if( iBestStart<0 ) iBestStart = 0;
-
     ctx.iRangeStart = iBestStart;
     ctx.iRangeEnd = iBestStart + nToken - 1;
 
     if( iBestStart>0 ){
       fts5HighlightAppend(&rc, &ctx, zEllips, -1);
     }
+
+    /* Advance iterator ctx.iter so that it points to the first coalesced
+    ** phrase instance at or following position iBestStart. */
+    while( ctx.iter.iStart>=0 && ctx.iter.iStart<iBestStart && rc==SQLITE_OK ){
+      rc = fts5CInstIterNext(&ctx.iter);
+    }
+
     if( rc==SQLITE_OK ){
       rc = pApi->xTokenize(pFts, ctx.zIn, ctx.nIn, (void*)&ctx,fts5HighlightCb);
     }
@@ -180198,15 +181714,15 @@
     }else{
       fts5HighlightAppend(&rc, &ctx, zEllips, -1);
     }
-
-    if( rc==SQLITE_OK ){
-      sqlite3_result_text(pCtx, (const char*)ctx.zOut, -1, SQLITE_TRANSIENT);
-    }else{
-      sqlite3_result_error_code(pCtx, rc);
-    }
-    sqlite3_free(ctx.zOut);
   }
+  if( rc==SQLITE_OK ){
+    sqlite3_result_text(pCtx, (const char*)ctx.zOut, -1, SQLITE_TRANSIENT);
+  }else{
+    sqlite3_result_error_code(pCtx, rc);
+  }
+  sqlite3_free(ctx.zOut);
   sqlite3_free(aSeen);
+  sqlite3_free(sFinder.aFirst);
 }
 
 /************************************************************************/
@@ -181925,6 +183441,7 @@
     case ',':  tok = FTS5_COMMA; break;
     case '+':  tok = FTS5_PLUS;  break;
     case '*':  tok = FTS5_STAR;  break;
+    case '-':  tok = FTS5_MINUS; break;
     case '\0': tok = FTS5_EOF;   break;
 
     case '"': {
@@ -182511,14 +184028,14 @@
   Fts5ExprNearset *pNear = pNode->pNear;
   int i, j;
   int rc = SQLITE_OK;
+  int bEof = 1;
 
   assert( pNode->bNomatch==0 );
   for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){
     Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
     for(j=0; j<pPhrase->nTerm; j++){
       Fts5ExprTerm *pTerm = &pPhrase->aTerm[j];
       Fts5ExprTerm *p;
-      int bEof = 1;
 
       for(p=pTerm; p && rc==SQLITE_OK; p=p->pSynonym){
         if( p->pIter ){
@@ -182538,13 +184055,12 @@
         }
       }
 
-      if( bEof ){
-        pNode->bEof = 1;
-        return rc;
-      }
+      if( bEof ) break;
     }
+    if( bEof ) break;
   }
 
+  pNode->bEof = bEof;
   return rc;
 }
 
@@ -183395,7 +184911,6 @@
 ){
   int rc = SQLITE_OK;             /* Return code */
   Fts5ExprPhrase *pOrig;          /* The phrase extracted from pExpr */
-  int i;                          /* Used to iterate through phrase terms */
   Fts5Expr *pNew = 0;             /* Expression to return via *ppNew */
   TokenCtx sCtx = {0,0};          /* Context object for fts5ParseTokenize */
 
@@ -183416,7 +184931,7 @@
   if( rc==SQLITE_OK ){
     Fts5Colset *pColsetOrig = pOrig->pNode->pNear->pColset;
     if( pColsetOrig ){
-      int nByte = sizeof(Fts5Colset) + pColsetOrig->nCol * sizeof(int);
+      int nByte = sizeof(Fts5Colset) + (pColsetOrig->nCol-1) * sizeof(int);
       Fts5Colset *pColset = (Fts5Colset*)sqlite3Fts5MallocZero(&rc, nByte);
       if( pColset ){ 
         memcpy(pColset, pColsetOrig, nByte);
@@ -183425,18 +184940,25 @@
     }
   }
 
-  for(i=0; rc==SQLITE_OK && i<pOrig->nTerm; i++){
-    int tflags = 0;
-    Fts5ExprTerm *p;
-    for(p=&pOrig->aTerm[i]; p && rc==SQLITE_OK; p=p->pSynonym){
-      const char *zTerm = p->zTerm;
-      rc = fts5ParseTokenize((void*)&sCtx, tflags, zTerm, (int)strlen(zTerm),
-          0, 0);
-      tflags = FTS5_TOKEN_COLOCATED;
+  if( pOrig->nTerm ){
+    int i;                          /* Used to iterate through phrase terms */
+    for(i=0; rc==SQLITE_OK && i<pOrig->nTerm; i++){
+      int tflags = 0;
+      Fts5ExprTerm *p;
+      for(p=&pOrig->aTerm[i]; p && rc==SQLITE_OK; p=p->pSynonym){
+        const char *zTerm = p->zTerm;
+        rc = fts5ParseTokenize((void*)&sCtx, tflags, zTerm, (int)strlen(zTerm),
+            0, 0);
+        tflags = FTS5_TOKEN_COLOCATED;
+      }
+      if( rc==SQLITE_OK ){
+        sCtx.pPhrase->aTerm[i].bPrefix = pOrig->aTerm[i].bPrefix;
+      }
     }
-    if( rc==SQLITE_OK ){
-      sCtx.pPhrase->aTerm[i].bPrefix = pOrig->aTerm[i].bPrefix;
-    }
+  }else{
+    /* This happens when parsing a token or quoted phrase that contains
+    ** no token characters at all. (e.g ... MATCH '""'). */
+    sCtx.pPhrase = sqlite3Fts5MallocZero(&rc, sizeof(Fts5ExprPhrase));
   }
 
   if( rc==SQLITE_OK ){
@@ -183551,6 +185073,34 @@
   return pNew;
 }
 
+/*
+** Allocate and return an Fts5Colset object specifying the inverse of
+** the colset passed as the second argument. Free the colset passed
+** as the second argument before returning.
+*/
+static Fts5Colset *sqlite3Fts5ParseColsetInvert(Fts5Parse *pParse, Fts5Colset *p){
+  Fts5Colset *pRet;
+  int nCol = pParse->pConfig->nCol;
+
+  pRet = (Fts5Colset*)sqlite3Fts5MallocZero(&pParse->rc, 
+      sizeof(Fts5Colset) + sizeof(int)*nCol
+  );
+  if( pRet ){
+    int i;
+    int iOld = 0;
+    for(i=0; i<nCol; i++){
+      if( iOld>=p->nCol || p->aiCol[iOld]!=i ){
+        pRet->aiCol[pRet->nCol++] = i;
+      }else{
+        iOld++;
+      }
+    }
+  }
+
+  sqlite3_free(p);
+  return pRet;
+}
+
 static Fts5Colset *sqlite3Fts5ParseColset(
   Fts5Parse *pParse,              /* Store SQLITE_NOMEM here if required */
   Fts5Colset *pColset,            /* Existing colset object */
@@ -185646,7 +187196,6 @@
   return pRet;
 }
 
-
 /*
 ** Release a reference to data record returned by an earlier call to
 ** fts5DataRead().
@@ -185655,6 +187204,18 @@
   sqlite3_free(pData);
 }
 
+static Fts5Data *fts5LeafRead(Fts5Index *p, i64 iRowid){
+  Fts5Data *pRet = fts5DataRead(p, iRowid);
+  if( pRet ){
+    if( pRet->szLeaf>pRet->nn ){
+      p->rc = FTS5_CORRUPT;
+      fts5DataRelease(pRet);
+      pRet = 0;
+    }
+  }
+  return pRet;
+}
+
 static int fts5IndexPrepareStmt(
   Fts5Index *p,
   sqlite3_stmt **ppStmt,
@@ -186463,7 +188024,7 @@
     pIter->pLeaf = pIter->pNextLeaf;
     pIter->pNextLeaf = 0;
   }else if( pIter->iLeafPgno<=pSeg->pgnoLast ){
-    pIter->pLeaf = fts5DataRead(p, 
+    pIter->pLeaf = fts5LeafRead(p, 
         FTS5_SEGMENT_ROWID(pSeg->iSegid, pIter->iLeafPgno)
     );
   }else{
@@ -186966,9 +188527,8 @@
         if( pLeaf->nn>pLeaf->szLeaf ){
           pIter->iPgidxOff = pLeaf->szLeaf + fts5GetVarint32(
               &pLeaf->p[pLeaf->szLeaf], pIter->iEndofDoclist
-              );
+          );
         }
-
       }
       else if( pLeaf->nn>pLeaf->szLeaf ){
         pIter->iPgidxOff = pLeaf->szLeaf + fts5GetVarint32(
@@ -187213,6 +188773,11 @@
     iTermOff += nKeep;
     iOff = iTermOff;
 
+    if( iOff>=n ){
+      p->rc = FTS5_CORRUPT;
+      return;
+    }
+
     /* Read the nKeep field of the next term. */
     fts5FastGetVarint32(a, iOff, nKeep);
   }
@@ -188140,6 +189705,15 @@
 }
 
 /*
+** xSetOutputs callback used when the Fts5Colset object has nCol==0 (match
+** against no columns at all).
+*/
+static void fts5IterSetOutputs_ZeroColset(Fts5Iter *pIter, Fts5SegIter *pSeg){
+  UNUSED_PARAM(pSeg);
+  pIter->base.nData = 0;
+}
+
+/*
 ** xSetOutputs callback used by detail=col when there is a column filter
 ** and there are 100 or more columns. Also called as a fallback from
 ** fts5IterSetOutputs_Col100 if the column-list spans more than one page.
@@ -188244,6 +189818,10 @@
       pIter->xSetOutputs = fts5IterSetOutputs_Nocolset;
     }
 
+    else if( pIter->pColset->nCol==0 ){
+      pIter->xSetOutputs = fts5IterSetOutputs_ZeroColset;
+    }
+
     else if( pConfig->eDetail==FTS5_DETAIL_FULL ){
       pIter->xSetOutputs = fts5IterSetOutputs_Full;
     }
@@ -194020,7 +195598,7 @@
 ){
   assert( nArg==0 );
   UNUSED_PARAM2(nArg, apUnused);
-  sqlite3_result_text(pCtx, "fts5: 2016-08-11 18:53:32 a12d8059770df4bca59e321c266410344242bf7b", -1, SQLITE_TRANSIENT);
+  sqlite3_result_text(pCtx, "fts5: 2016-10-14 10:20:30 707875582fcba352b4906a595ad89198d84711d8", -1, SQLITE_TRANSIENT);
 }
 
 static int fts5Init(sqlite3 *db){
@@ -194108,7 +195686,7 @@
 #ifdef _WIN32
 __declspec(dllexport)
 #endif
-SQLITE_API int SQLITE_STDCALL sqlite3_fts_init(
+SQLITE_API int sqlite3_fts_init(
   sqlite3 *db,
   char **pzErrMsg,
   const sqlite3_api_routines *pApi
@@ -194121,7 +195699,7 @@
 #ifdef _WIN32
 __declspec(dllexport)
 #endif
-SQLITE_API int SQLITE_STDCALL sqlite3_fts5_init(
+SQLITE_API int sqlite3_fts5_init(
   sqlite3 *db,
   char **pzErrMsg,
   const sqlite3_api_routines *pApi
@@ -197502,8 +199080,19 @@
     }
   }
 
-  pInfo->idxNum = idxNum;
+  /* This virtual table always delivers results in ascending order of
+  ** the "term" column (column 0). So if the user has requested this
+  ** specifically - "ORDER BY term" or "ORDER BY term ASC" - set the
+  ** sqlite3_index_info.orderByConsumed flag to tell the core the results
+  ** are already in sorted order.  */
+  if( pInfo->nOrderBy==1 
+   && pInfo->aOrderBy[0].iColumn==0 
+   && pInfo->aOrderBy[0].desc==0
+  ){
+    pInfo->orderByConsumed = 1;
+  }
 
+  pInfo->idxNum = idxNum;
   return SQLITE_OK;
 }
 
Index: ext/sqlite3/sqlite3.h
===================================================================
diff -u -r0973305126aaa89ff5fcab7414526e4b0a8b41e3 -r5e4863063b087416abc0263bee46243d1162c7d8
--- ext/sqlite3/sqlite3.h	(.../sqlite3.h)	(revision 0973305126aaa89ff5fcab7414526e4b0a8b41e3)
+++ ext/sqlite3/sqlite3.h	(.../sqlite3.h)	(revision 5e4863063b087416abc0263bee46243d1162c7d8)
@@ -108,7 +108,8 @@
 ** be held constant and Z will be incremented or else Y will be incremented
 ** and Z will be reset to zero.
 **
-** Since version 3.6.18, SQLite source code has been stored in the
+** Since [version 3.6.18] ([dateof:3.6.18]), 
+** SQLite source code has been stored in the
 ** <a href="http://www.fossil-scm.org/">Fossil configuration management
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
 ** a string which identifies a particular check-in of SQLite
@@ -120,9 +121,9 @@
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.14.1"
-#define SQLITE_VERSION_NUMBER 3014001
-#define SQLITE_SOURCE_ID      "2016-08-11 18:53:32 a12d8059770df4bca59e321c266410344242bf7b"
+#define SQLITE_VERSION        "3.15.0"
+#define SQLITE_VERSION_NUMBER 3015000
+#define SQLITE_SOURCE_ID      "2016-10-14 10:20:30 707875582fcba352b4906a595ad89198d84711d8"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -155,9 +156,9 @@
 ** See also: [sqlite_version()] and [sqlite_source_id()].
 */
 SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
 
 /*
 ** CAPI3REF: Run-Time Library Compilation Options Diagnostics
@@ -182,8 +183,8 @@
 ** [sqlite_compileoption_get()] and the [compile_options pragma].
 */
 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
 #endif
 
 /*
@@ -222,7 +223,7 @@
 **
 ** See the [threading mode] documentation for additional information.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
 
 /*
 ** CAPI3REF: Database Connection Handle
@@ -319,8 +320,8 @@
 ** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
 ** argument is a harmless no-op.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
 
 /*
 ** The type for a callback function.
@@ -391,7 +392,7 @@
 **      the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
 ** </ul>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
   sqlite3*,                                  /* An open database */
   const char *sql,                           /* SQL to be evaluated */
   int (*callback)(void*,int,char**,char**),  /* Callback function */
@@ -452,7 +453,8 @@
 ** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
 ** support for additional result codes that provide more detailed information
 ** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
@@ -1390,10 +1392,10 @@
 ** must return [SQLITE_OK] on success and some other [error code] upon
 ** failure.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
 
 /*
 ** CAPI3REF: Configuring The SQLite Library
@@ -1426,7 +1428,7 @@
 ** ^If the option is unknown or SQLite is unable to set the option
 ** then this routine returns a non-zero [error code].
 */
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
 
 /*
 ** CAPI3REF: Configure database connections
@@ -1445,7 +1447,7 @@
 ** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
 ** the call is considered successful.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Memory Allocation Routines
@@ -1969,8 +1971,18 @@
 ** be a NULL pointer, in which case the new setting is not reported back.
 ** </dd>
 **
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema.  ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main".  ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
 ** </dl>
 */
+#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
 #define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
 #define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
 #define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
@@ -1986,7 +1998,7 @@
 ** [extended result codes] feature of SQLite. ^The extended result
 ** codes are disabled by default for historical compatibility.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 
 /*
 ** CAPI3REF: Last Insert Rowid
@@ -2038,7 +2050,7 @@
 ** unpredictable and might not equal either the old or the new
 ** last insert [rowid].
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
 
 /*
 ** CAPI3REF: Count The Number Of Rows Modified
@@ -2091,7 +2103,7 @@
 ** while [sqlite3_changes()] is running then the value returned
 ** is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Total Number Of Rows Modified
@@ -2115,7 +2127,7 @@
 ** while [sqlite3_total_changes()] is running then the value
 ** returned is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
+SQLITE_API int sqlite3_total_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Interrupt A Long-Running Query
@@ -2155,7 +2167,7 @@
 ** If the database connection closes while [sqlite3_interrupt()]
 ** is running then bad things will likely happen.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Is Complete
@@ -2190,8 +2202,8 @@
 ** The input to [sqlite3_complete16()] must be a zero-terminated
 ** UTF-16 string in native byte order.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
 
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
@@ -2252,7 +2264,7 @@
 ** A busy handler must not close the database connection
 ** or [prepared statement] that invoked the busy handler.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
 
 /*
 ** CAPI3REF: Set A Busy Timeout
@@ -2275,7 +2287,7 @@
 **
 ** See also:  [PRAGMA busy_timeout]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
 /*
 ** CAPI3REF: Convenience Routines For Running Queries
@@ -2350,15 +2362,15 @@
 ** reflected in subsequent calls to [sqlite3_errcode()] or
 ** [sqlite3_errmsg()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
   sqlite3 *db,          /* An open database */
   const char *zSql,     /* SQL to be evaluated */
   char ***pazResult,    /* Results of the query */
   int *pnRow,           /* Number of result rows written here */
   int *pnColumn,        /* Number of result columns written here */
   char **pzErrmsg       /* Error msg written here */
 );
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
 
 /*
 ** CAPI3REF: Formatted String Printing Functions
@@ -2464,10 +2476,10 @@
 ** addition that after the string has been read and copied into
 ** the result, [sqlite3_free()] is called on the input string.)^
 */
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
 
 /*
 ** CAPI3REF: Memory Allocation Subsystem
@@ -2557,12 +2569,12 @@
 ** a block of memory after it has been released using
 ** [sqlite3_free()] or [sqlite3_realloc()].
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
 
 /*
 ** CAPI3REF: Memory Allocator Statistics
@@ -2587,8 +2599,8 @@
 ** by [sqlite3_memory_highwater(1)] is the high-water mark
 ** prior to the reset.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
 
 /*
 ** CAPI3REF: Pseudo-Random Number Generator
@@ -2611,7 +2623,7 @@
 ** internally and without recourse to the [sqlite3_vfs] xRandomness
 ** method.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
 
 /*
 ** CAPI3REF: Compile-Time Authorization Callbacks
@@ -2694,7 +2706,7 @@
 ** as stated in the previous paragraph, sqlite3_step() invokes
 ** sqlite3_prepare_v2() to reprepare a statement after a schema change.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
   sqlite3*,
   int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
   void *pUserData
@@ -2802,9 +2814,9 @@
 ** sqlite3_profile() function is considered experimental and is
 ** subject to change in future versions of SQLite.
 */
-SQLITE_API SQLITE_DEPRECATED void *SQLITE_STDCALL sqlite3_trace(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
    void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_DEPRECATED void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
    void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
 
 /*
@@ -2893,7 +2905,7 @@
 ** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
 ** are deprecated.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_trace_v2(
+SQLITE_API int sqlite3_trace_v2(
   sqlite3*,
   unsigned uMask,
   int(*xCallback)(unsigned,void*,void*,void*),
@@ -2932,7 +2944,7 @@
 ** database connections for the meaning of "modify" in this paragraph.
 **
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 
 /*
 ** CAPI3REF: Opening A New Database Connection
@@ -3161,15 +3173,15 @@
 **
 ** See also: [sqlite3_temp_directory]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
   const void *filename,   /* Database filename (UTF-16) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb,         /* OUT: SQLite db handle */
   int flags,              /* Flags */
@@ -3215,9 +3227,9 @@
 ** VFS method, then the behavior of this routine is undefined and probably
 ** undesirable.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
 
 
 /*
@@ -3261,11 +3273,11 @@
 ** was invoked incorrectly by the application.  In that case, the
 ** error code and message may or may not be set.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
 
 /*
 ** CAPI3REF: Prepared Statement Object
@@ -3333,7 +3345,7 @@
 **
 ** New run-time limit categories may be added in future releases.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
 
 /*
 ** CAPI3REF: Run-Time Limit Categories
@@ -3485,28 +3497,28 @@
 ** </li>
 ** </ol>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const void **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
@@ -3545,8 +3557,8 @@
 ** is obtained from [sqlite3_malloc()] and must be free by the application
 ** by passing it to [sqlite3_free()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
-SQLITE_API char *SQLITE_STDCALL sqlite3_expanded_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Writes The Database
@@ -3578,7 +3590,7 @@
 ** change the configuration of a database connection, they do not make 
 ** changes to the content of the database files on disk.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If A Prepared Statement Has Been Reset
@@ -3599,7 +3611,7 @@
 ** for example, in diagnostic routines to search for prepared 
 ** statements that are holding a transaction open.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Dynamically Typed Value Object
@@ -3763,20 +3775,20 @@
 ** See also: [sqlite3_bind_parameter_count()],
 ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
                         void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
                          void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
 
 /*
 ** CAPI3REF: Number Of SQL Parameters
@@ -3797,7 +3809,7 @@
 ** [sqlite3_bind_parameter_name()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Name Of A Host Parameter
@@ -3825,7 +3837,7 @@
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
 
 /*
 ** CAPI3REF: Index Of A Parameter With A Given Name
@@ -3842,7 +3854,7 @@
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_name()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
 
 /*
 ** CAPI3REF: Reset All Bindings On A Prepared Statement
@@ -3852,7 +3864,7 @@
 ** the [sqlite3_bind_blob | bindings] on a [prepared statement].
 ** ^Use this routine to reset all host parameters to NULL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number Of Columns In A Result Set
@@ -3864,7 +3876,7 @@
 **
 ** See also: [sqlite3_data_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Column Names In A Result Set
@@ -3893,8 +3905,8 @@
 ** then the name of the column is unspecified and may change from
 ** one release of SQLite to the next.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
 
 /*
 ** CAPI3REF: Source Of Data In A Query Result
@@ -3942,12 +3954,12 @@
 ** for the same [prepared statement] and result column
 ** at the same time then the results are undefined.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Declared Datatype Of A Query Result
@@ -3979,8 +3991,8 @@
 ** is associated with individual values, not with the containers
 ** used to hold those values.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Evaluate An SQL Statement
@@ -4041,7 +4053,8 @@
 ** other than [SQLITE_ROW] before any subsequent invocation of
 ** sqlite3_step().  Failure to reset the prepared statement using 
 ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step().  But after version 3.6.23.1, sqlite3_step() began
+** sqlite3_step().  But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
 ** calling [sqlite3_reset()] automatically in this circumstance rather
 ** than returning [SQLITE_MISUSE].  This is not considered a compatibility
 ** break because any application that ever receives an SQLITE_MISUSE error
@@ -4060,7 +4073,7 @@
 ** then the more specific [error codes] are returned directly
 ** by sqlite3_step().  The use of the "v2" interface is recommended.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number of columns in a result set
@@ -4081,7 +4094,7 @@
 **
 ** See also: [sqlite3_column_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Fundamental Datatypes
@@ -4271,16 +4284,16 @@
 ** pointer.  Subsequent calls to [sqlite3_errcode()] will return
 ** [SQLITE_NOMEM].)^
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
 
 /*
 ** CAPI3REF: Destroy A Prepared Statement Object
@@ -4308,7 +4321,7 @@
 ** statement after it has been finalized can result in undefined and
 ** undesirable behavior such as segfaults and heap corruption.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Reset A Prepared Statement Object
@@ -4335,7 +4348,7 @@
 ** ^The [sqlite3_reset(S)] interface does not change the values
 ** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Create Or Redefine SQL Functions
@@ -4435,7 +4448,7 @@
 ** close the database connection nor finalize or reset the prepared
 ** statement in which the function is running.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
@@ -4445,7 +4458,7 @@
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
   sqlite3 *db,
   const void *zFunctionName,
   int nArg,
@@ -4455,7 +4468,7 @@
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
@@ -4501,12 +4514,12 @@
 ** these functions, we will not explain what they do.
 */
 #ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
                       void*,sqlite3_int64);
 #endif
 
@@ -4556,18 +4569,18 @@
 ** These routines must be called from the same thread as
 ** the SQL function that supplied the [sqlite3_value*] parameters.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
 
 /*
 ** CAPI3REF: Finding The Subtype Of SQL Values
@@ -4583,7 +4596,7 @@
 ** from the result of one [application-defined SQL function] into the
 ** input of another.
 */
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
 
 /*
 ** CAPI3REF: Copy And Free SQL Values
@@ -4599,8 +4612,8 @@
 ** previously obtained from [sqlite3_value_dup()].  ^If V is a NULL pointer
 ** then sqlite3_value_free(V) is a harmless no-op.
 */
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
 
 /*
 ** CAPI3REF: Obtain Aggregate Function Context
@@ -4645,7 +4658,7 @@
 ** This routine must be called from the same thread in which
 ** the aggregate SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
 
 /*
 ** CAPI3REF: User Data For Functions
@@ -4660,7 +4673,7 @@
 ** This routine must be called from the same thread in which
 ** the application-defined function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
 
 /*
 ** CAPI3REF: Database Connection For Functions
@@ -4672,7 +4685,7 @@
 ** and [sqlite3_create_function16()] routines that originally
 ** registered the application defined function.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
 
 /*
 ** CAPI3REF: Function Auxiliary Data
@@ -4726,8 +4739,8 @@
 ** These routines must be called from the same thread in which
 ** the SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
 
 
 /*
@@ -4863,27 +4876,27 @@
 ** than the one containing the application-defined function that received
 ** the [sqlite3_context] pointer, the results are undefined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
                            sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
                            void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
 
 
 /*
@@ -4898,7 +4911,7 @@
 ** The number of subtype bytes preserved by SQLite might increase
 ** in future releases of SQLite.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
 
 /*
 ** CAPI3REF: Define New Collating Sequences
@@ -4980,22 +4993,22 @@
 **
 ** See also:  [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*),
   void(*xDestroy)(void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
   sqlite3*, 
   const void *zName,
   int eTextRep, 
@@ -5030,12 +5043,12 @@
 ** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
 ** [sqlite3_create_collation_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
   sqlite3*, 
   void*, 
   void(*)(void*,sqlite3*,int eTextRep,const char*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
   sqlite3*, 
   void*,
   void(*)(void*,sqlite3*,int eTextRep,const void*)
@@ -5049,11 +5062,11 @@
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
+SQLITE_API int sqlite3_key(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
+SQLITE_API int sqlite3_key_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The key */
@@ -5067,11 +5080,11 @@
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The new key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
+SQLITE_API int sqlite3_rekey_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The new key */
@@ -5081,7 +5094,7 @@
 ** Specify the activation key for a SEE database.  Unless 
 ** activated, none of the SEE routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
+SQLITE_API void sqlite3_activate_see(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
@@ -5091,7 +5104,7 @@
 ** Specify the activation key for a CEROD database.  Unless 
 ** activated, none of the CEROD routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
+SQLITE_API void sqlite3_activate_cerod(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
@@ -5113,7 +5126,7 @@
 ** all, then the behavior of sqlite3_sleep() may deviate from the description
 ** in the previous paragraphs.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
 
 /*
 ** CAPI3REF: Name Of The Folder Holding Temporary Files
@@ -5232,7 +5245,7 @@
 ** connection while this routine is running, then the return value
 ** is undefined.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
 
 /*
 ** CAPI3REF: Find The Database Handle Of A Prepared Statement
@@ -5245,7 +5258,7 @@
 ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
 ** create the statement in the first place.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Return The Filename For A Database Connection
@@ -5262,7 +5275,7 @@
 ** will be an absolute pathname, even if the filename used
 ** to open the database originally was a URI or relative pathname.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Determine if a database is read-only
@@ -5272,7 +5285,7 @@
 ** of connection D is read-only, 0 if it is read/write, or -1 if N is not
 ** the name of a database on connection D.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Find the next prepared statement
@@ -5288,7 +5301,7 @@
 ** [sqlite3_next_stmt(D,S)] must refer to an open database
 ** connection and in particular must not be a NULL pointer.
 */
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Commit And Rollback Notification Callbacks
@@ -5337,8 +5350,8 @@
 **
 ** See also the [sqlite3_update_hook()] interface.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
 
 /*
 ** CAPI3REF: Data Change Notification Callbacks
@@ -5389,7 +5402,7 @@
 ** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
 ** and [sqlite3_preupdate_hook()] interfaces.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
   sqlite3*, 
   void(*)(void *,int ,char const *,char const *,sqlite3_int64),
   void*
@@ -5404,7 +5417,8 @@
 ** and disabled if the argument is false.)^
 **
 ** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]). 
+** In prior versions of SQLite,
 ** sharing was enabled or disabled for each thread separately.
 **
 ** ^(The cache sharing mode set by this interface effects all subsequent
@@ -5429,7 +5443,7 @@
 **
 ** See Also:  [SQLite Shared-Cache Mode]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
 
 /*
 ** CAPI3REF: Attempt To Free Heap Memory
@@ -5445,7 +5459,7 @@
 **
 ** See also: [sqlite3_db_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
 
 /*
 ** CAPI3REF: Free Memory Used By A Database Connection
@@ -5459,7 +5473,7 @@
 **
 ** See also: [sqlite3_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
 
 /*
 ** CAPI3REF: Impose A Limit On Heap Size
@@ -5498,7 +5512,8 @@
 **      from the heap.
 ** </ul>)^
 **
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]), 
+** the soft heap limit is enforced
 ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
 ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
 ** the soft heap limit is enforced on every memory allocation.  Without
@@ -5511,7 +5526,7 @@
 ** The circumstances under which SQLite will enforce the soft heap limit may
 ** changes in future releases of SQLite.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
 
 /*
 ** CAPI3REF: Deprecated Soft Heap Limit Interface
@@ -5522,7 +5537,7 @@
 ** only.  All new applications should use the
 ** [sqlite3_soft_heap_limit64()] interface rather than this one.
 */
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
 
 
 /*
@@ -5592,7 +5607,7 @@
 ** parsed, if that has not already been done, and returns an error if
 ** any errors are encountered while loading the schema.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
   sqlite3 *db,                /* Connection handle */
   const char *zDbName,        /* Database name or NULL */
   const char *zTableName,     /* Table name */
@@ -5648,7 +5663,7 @@
 **
 ** See also the [load_extension() SQL function].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
   sqlite3 *db,          /* Load the extension into this database connection */
   const char *zFile,    /* Name of the shared library containing extension */
   const char *zProc,    /* Entry point.  Derived from zFile if 0 */
@@ -5680,7 +5695,7 @@
 ** remains disabled. This will prevent SQL injections from giving attackers
 ** access to extension loading capabilities.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
 
 /*
 ** CAPI3REF: Automatically Load Statically Linked Extensions
@@ -5718,7 +5733,7 @@
 ** See also: [sqlite3_reset_auto_extension()]
 ** and [sqlite3_cancel_auto_extension()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void(*xEntryPoint)(void));
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Cancel Automatic Extension Loading
@@ -5730,15 +5745,15 @@
 ** unregistered and it returns 0 if X was not on the list of initialization
 ** routines.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Reset Automatic Extension Loading
 **
 ** ^This interface disables all automatic extensions previously
 ** registered using [sqlite3_auto_extension()].
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
+SQLITE_API void sqlite3_reset_auto_extension(void);
 
 /*
 ** The interface to the virtual-table mechanism is currently considered
@@ -5892,13 +5907,15 @@
 ** the xUpdate method are automatically rolled back by SQLite.
 **
 ** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]). 
+** If a virtual table extension is
 ** used with an SQLite version earlier than 3.8.2, the results of attempting 
 ** to read or write the estimatedRows field are undefined (but are likely 
 ** to included crashing the application). The estimatedRows field should
 ** therefore only be used if [sqlite3_libversion_number()] returns a
 ** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
+** was added for [version 3.9.0] ([dateof:3.9.0]). 
+** It may therefore only be used if
 ** sqlite3_libversion_number() returns a value greater than or equal to
 ** 3009000.
 */
@@ -5983,13 +6000,13 @@
 ** interface is equivalent to sqlite3_create_module_v2() with a NULL
 ** destructor.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
   void *pClientData          /* Client data for xCreate/xConnect */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
@@ -6052,7 +6069,7 @@
 ** to declare the format (the names and datatypes of the columns) of
 ** the virtual tables they implement.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
 
 /*
 ** CAPI3REF: Overload A Function For A Virtual Table
@@ -6071,7 +6088,7 @@
 ** purpose is to be a placeholder function that can be overloaded
 ** by a [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
 
 /*
 ** The interface to the virtual-table mechanism defined above (back up
@@ -6170,7 +6187,7 @@
 ** To avoid a resource leak, every open [BLOB handle] should eventually
 ** be released by a call to [sqlite3_blob_close()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
   sqlite3*,
   const char *zDb,
   const char *zTable,
@@ -6203,7 +6220,7 @@
 **
 ** ^This function sets the database handle error code and message.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
 
 /*
 ** CAPI3REF: Close A BLOB Handle
@@ -6226,7 +6243,7 @@
 ** is passed a valid open blob handle, the values returned by the 
 ** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Return The Size Of An Open BLOB
@@ -6242,7 +6259,7 @@
 ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
 ** to this routine results in undefined and probably undesirable behavior.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Read Data From A BLOB Incrementally
@@ -6271,7 +6288,7 @@
 **
 ** See also: [sqlite3_blob_write()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
 
 /*
 ** CAPI3REF: Write Data Into A BLOB Incrementally
@@ -6313,7 +6330,7 @@
 **
 ** See also: [sqlite3_blob_read()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
 
 /*
 ** CAPI3REF: Virtual File System Objects
@@ -6344,9 +6361,9 @@
 ** ^(If the default VFS is unregistered, another VFS is chosen as
 ** the default.  The choice for the new VFS is arbitrary.)^
 */
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
 
 /*
 ** CAPI3REF: Mutexes
@@ -6462,11 +6479,11 @@
 **
 ** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
 
 /*
 ** CAPI3REF: Mutex Methods Object
@@ -6576,8 +6593,8 @@
 ** interface should also return 1 when given a NULL pointer.
 */
 #ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #endif
 
 /*
@@ -6596,7 +6613,7 @@
 #define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
 #define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_randomness() */
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
@@ -6617,7 +6634,7 @@
 ** ^If the [threading mode] is Single-thread or Multi-thread then this
 ** routine returns a NULL pointer.
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 
 /*
 ** CAPI3REF: Low-Level Control Of Database Files
@@ -6652,7 +6669,7 @@
 **
 ** See also: [SQLITE_FCNTL_LOCKSTATE]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
 
 /*
 ** CAPI3REF: Testing Interface
@@ -6671,7 +6688,7 @@
 ** Unlike most of the SQLite API, this function is not guaranteed to
 ** operate consistently from one release to the next.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
 
 /*
 ** CAPI3REF: Testing Interface Operation Codes
@@ -6700,6 +6717,7 @@
 #define SQLITE_TESTCTRL_SCRATCHMALLOC           17
 #define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD    19
 #define SQLITE_TESTCTRL_NEVER_CORRUPT           20
 #define SQLITE_TESTCTRL_VDBE_COVERAGE           21
 #define SQLITE_TESTCTRL_BYTEORDER               22
@@ -6734,8 +6752,8 @@
 **
 ** See also: [sqlite3_db_status()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
   int op,
   sqlite3_int64 *pCurrent,
   sqlite3_int64 *pHighwater,
@@ -6860,7 +6878,7 @@
 **
 ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for database connections
@@ -7003,7 +7021,7 @@
 **
 ** See also: [sqlite3_status()] and [sqlite3_db_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for prepared statements
@@ -7472,16 +7490,16 @@
 ** same time as another thread is invoking sqlite3_backup_step() it is
 ** possible that they return invalid values.
 */
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
   sqlite3 *pDest,                        /* Destination database handle */
   const char *zDestName,                 /* Destination database name */
   sqlite3 *pSource,                      /* Source database handle */
   const char *zSourceName                /* Source database name */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
 
 /*
 ** CAPI3REF: Unlock Notification
@@ -7598,7 +7616,7 @@
 ** the special "DROP TABLE/INDEX" case, the extended error code is just 
 ** SQLITE_LOCKED.)^
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
   sqlite3 *pBlocked,                          /* Waiting connection */
   void (*xNotify)(void **apArg, int nArg),    /* Callback function to invoke */
   void *pNotifyArg                            /* Argument to pass to xNotify */
@@ -7613,8 +7631,8 @@
 ** strings in a case-independent fashion, using the same definition of "case
 ** independence" that SQLite uses internally when comparing identifiers.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
 
 /*
 ** CAPI3REF: String Globbing
@@ -7631,7 +7649,7 @@
 **
 ** See also: [sqlite3_strlike()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
 
 /*
 ** CAPI3REF: String LIKE Matching
@@ -7654,7 +7672,7 @@
 **
 ** See also: [sqlite3_strglob()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
 
 /*
 ** CAPI3REF: Error Logging Interface
@@ -7677,7 +7695,7 @@
 ** a few hundred characters, it will be truncated to the length of the
 ** buffer.
 */
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
 
 /*
 ** CAPI3REF: Write-Ahead Log Commit Hook
@@ -7713,7 +7731,7 @@
 ** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
 ** overwrite any prior [sqlite3_wal_hook()] settings.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
   sqlite3*, 
   int(*)(void *,sqlite3*,const char*,int),
   void*
@@ -7748,7 +7766,7 @@
 ** is only necessary if the default setting is found to be suboptimal
 ** for a particular application.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 
 /*
 ** CAPI3REF: Checkpoint a database
@@ -7770,7 +7788,7 @@
 ** start a callback but which do not need the full power (and corresponding
 ** complication) of [sqlite3_wal_checkpoint_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 
 /*
 ** CAPI3REF: Checkpoint a database
@@ -7864,7 +7882,7 @@
 ** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
 ** from SQL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
   sqlite3 *db,                    /* Database handle */
   const char *zDb,                /* Name of attached database (or NULL) */
   int eMode,                      /* SQLITE_CHECKPOINT_* value */
@@ -7900,7 +7918,7 @@
 ** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
 ** may be added in the future.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Virtual Table Configuration Options
@@ -7953,7 +7971,7 @@
 ** of the SQL statement that triggered the call to the [xUpdate] method of the
 ** [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
 /*
 ** CAPI3REF: Conflict resolution modes
@@ -8058,7 +8076,7 @@
 **
 ** See also: [sqlite3_stmt_scanstatus_reset()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
   sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
   int idx,                  /* Index of loop to report on */
   int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
@@ -8074,7 +8092,7 @@
 ** This API is only available if the library is built with pre-processor
 ** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Flush caches to disk mid-transaction
@@ -8106,7 +8124,7 @@
 ** ^This function does not set the database handle error code or message
 ** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
 
 /*
 ** CAPI3REF: The pre-update hook.
@@ -8186,7 +8204,7 @@
 **
 ** See also:  [sqlite3_update_hook()]
 */
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_preupdate_hook(
+SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_preupdate_hook(
   sqlite3 *db,
   void(*xPreUpdate)(
     void *pCtx,                   /* Copy of third arg to preupdate_hook() */
@@ -8199,10 +8217,10 @@
   ),
   void*
 );
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_count(sqlite3 *);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_depth(sqlite3 *);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
 
 /*
 ** CAPI3REF: Low-level system error code
@@ -8214,7 +8232,7 @@
 ** called to get back the underlying "errno" that caused the problem, such
 ** as ENOSPC, EAUTH, EISDIR, and so forth.  
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_system_errno(sqlite3*);
+SQLITE_API int sqlite3_system_errno(sqlite3*);
 
 /*
 ** CAPI3REF: Database Snapshot
@@ -8264,7 +8282,7 @@
 ** The [sqlite3_snapshot_get()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
   sqlite3 *db,
   const char *zSchema,
   sqlite3_snapshot **ppSnapshot
@@ -8302,7 +8320,7 @@
 ** The [sqlite3_snapshot_open()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
   sqlite3 *db,
   const char *zSchema,
   sqlite3_snapshot *pSnapshot
@@ -8319,7 +8337,7 @@
 ** The [sqlite3_snapshot_free()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
 
 /*
 ** CAPI3REF: Compare the ages of two snapshot handles.
@@ -8343,7 +8361,7 @@
 ** snapshot than P2, zero if the two handles refer to the same database
 ** snapshot, and a positive value if P1 is a newer snapshot than P2.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_cmp(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
   sqlite3_snapshot *p1,
   sqlite3_snapshot *p2
 );
@@ -8401,7 +8419,7 @@
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
   int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
@@ -8427,7 +8445,7 @@
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
   sqlite3 *db,
   const char *zQueryFunc,
   int (*xQueryFunc)(sqlite3_rtree_query_info*),
@@ -8639,7 +8657,7 @@
 ** CAPI3REF: Set a table filter on a Session Object.
 **
 ** The second argument (xFilter) is the "filter callback". For changes to rows 
-** in tables that are not attached to the Session oject, the filter is called
+** in tables that are not attached to the Session object, the filter is called
 ** to determine whether changes to the table's rows should be tracked or not. 
 ** If xFilter returns 0, changes is not tracked. Note that once a table is 
 ** attached, xFilter will not be called again.
@@ -8905,7 +8923,7 @@
 ** [sqlite3changeset_invert()] functions, all changes within the changeset 
 ** that apply to a single table are grouped together. This means that when 
 ** an application iterates through a changeset using an iterator created by 
-** this function, all changes that relate to a single table are visted 
+** this function, all changes that relate to a single table are visited 
 ** consecutively. There is no chance that the iterator will visit a change 
 ** the applies to table X, then one for table Y, and then later on visit 
 ** another change for table X.
@@ -8992,7 +9010,7 @@
 ** 0x01 if the corresponding column is part of the tables primary key, or
 ** 0x00 if it is not.
 **
-** If argumet pnCol is not NULL, then *pnCol is set to the number of columns
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
 ** in the table.
 **
 ** If this function is called when the iterator does not point to a valid
@@ -9209,12 +9227,12 @@
 
 
 /*
-** Changegroup handle.
+** CAPI3REF: Changegroup Handle
 */
 typedef struct sqlite3_changegroup sqlite3_changegroup;
 
 /*
-** CAPI3REF: Combine two or more changesets into a single changeset.
+** CAPI3REF: Create A New Changegroup Object
 **
 ** An sqlite3_changegroup object is used to combine two or more changesets
 ** (or patchsets) into a single changeset (or patchset). A single changegroup
@@ -9251,6 +9269,8 @@
 int sqlite3changegroup_new(sqlite3_changegroup **pp);
 
 /*
+** CAPI3REF: Add A Changeset To A Changegroup
+**
 ** Add all changes within the changeset (or patchset) in buffer pData (size
 ** nData bytes) to the changegroup. 
 **
@@ -9265,7 +9285,7 @@
 ** apply to the same row as a change already present in the changegroup if
 ** the two rows have the same primary key.
 **
-** Changes to rows that that do not already appear in the changegroup are
+** Changes to rows that do not already appear in the changegroup are
 ** simply copied into it. Or, if both the new changeset and the changegroup
 ** contain changes that apply to a single row, the final contents of the
 ** changegroup depends on the type of each change, as follows:
@@ -9326,6 +9346,8 @@
 int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
 
 /*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+**
 ** Obtain a buffer containing a changeset (or patchset) representing the
 ** current contents of the changegroup. If the inputs to the changegroup
 ** were themselves changesets, the output is a changeset. Or, if the
@@ -9354,7 +9376,7 @@
 );
 
 /*
-** Delete a changegroup object.
+** CAPI3REF: Delete A Changegroup Object
 */
 void sqlite3changegroup_delete(sqlite3_changegroup*);
 
Index: ext/sqlite3/sqlite3.rc
===================================================================
diff -u -r0973305126aaa89ff5fcab7414526e4b0a8b41e3 -r5e4863063b087416abc0263bee46243d1162c7d8
Binary files differ
Index: ext/sqlite3/version.txt
===================================================================
diff -u -r0973305126aaa89ff5fcab7414526e4b0a8b41e3 -r5e4863063b087416abc0263bee46243d1162c7d8
--- ext/sqlite3/version.txt	(.../version.txt)	(revision 0973305126aaa89ff5fcab7414526e4b0a8b41e3)
+++ ext/sqlite3/version.txt	(.../version.txt)	(revision 5e4863063b087416abc0263bee46243d1162c7d8)
@@ -1,2 +1,2 @@
-SQLite 3.14.1.0
+SQLite 3.15.0.0
 Downloaded from www.sqlite.org