Index: ext/sqlite3/sqlite3.c =================================================================== diff -u -N -r4e126c4c1e72c1952781ff23bfcaa2993f86bf22 -r4d6f618a44fd2e5096b5b7ea27b613a49f3aee7f --- ext/sqlite3/sqlite3.c (.../sqlite3.c) (revision 4e126c4c1e72c1952781ff23bfcaa2993f86bf22) +++ ext/sqlite3/sqlite3.c (.../sqlite3.c) (revision 4d6f618a44fd2e5096b5b7ea27b613a49f3aee7f) @@ -1,6 +1,6 @@ /****************************************************************************** ** This file is an amalgamation of many separate C source files from SQLite -** version 3.8.4.3. By combining all the individual C code files into this +** version 3.8.8.1. By combining all the individual C code files into this ** single large file, the entire code can be compiled as a single translation ** unit. This allows many compilers to do optimizations that would not be ** possible if the files were compiled separately. Performance improvements @@ -44,6 +44,53 @@ #define _SQLITEINT_H_ /* +** Include the header file used to customize the compiler options for MSVC. +** This should be done first so that it can successfully prevent spurious +** compiler warnings due to subsequent content in this file and other files +** that are included by this file. +*/ +/************** Include msvc.h in the middle of sqliteInt.h ******************/ +/************** Begin file msvc.h ********************************************/ +/* +** 2015 January 12 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains code that is specific to MSVC. +*/ +#ifndef _MSVC_H_ +#define _MSVC_H_ + +#if defined(_MSC_VER) +#pragma warning(disable : 4054) +#pragma warning(disable : 4055) +#pragma warning(disable : 4100) +#pragma warning(disable : 4127) +#pragma warning(disable : 4152) +#pragma warning(disable : 4189) +#pragma warning(disable : 4206) +#pragma warning(disable : 4210) +#pragma warning(disable : 4232) +#pragma warning(disable : 4244) +#pragma warning(disable : 4305) +#pragma warning(disable : 4306) +#pragma warning(disable : 4702) +#pragma warning(disable : 4706) +#endif /* defined(_MSC_VER) */ + +#endif /* _MSVC_H_ */ + +/************** End of msvc.h ************************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ + +/* ** These #defines should enable >2GB file support on POSIX if the ** underlying operating system supports it. If the OS lacks ** large file support, or if the OS is windows, these should be no-ops. @@ -75,6 +122,15 @@ # define _LARGEFILE_SOURCE 1 #endif +/* Needed for various definitions... */ +#if defined(__GNUC__) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif + +#if defined(__OpenBSD__) && !defined(_BSD_SOURCE) +# define _BSD_SOURCE +#endif + /* ** For MinGW, check to see if we can include the header file containing its ** version information, among other things. Normally, this internal MinGW @@ -172,7 +228,7 @@ /* ** These no-op macros are used in front of interfaces to mark those ** interfaces as either deprecated or experimental. New applications -** should not use deprecated interfaces - they are support for backwards +** should not use deprecated interfaces - they are supported for backwards ** compatibility only. Application writers should be aware that ** experimental interfaces are subject to change in point releases. ** @@ -222,9 +278,9 @@ ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.8.4.3" -#define SQLITE_VERSION_NUMBER 3008004 -#define SQLITE_SOURCE_ID "2014-04-03 16:53:12 a611fa96c4a848614efe899130359c9f6fb889c3" +#define SQLITE_VERSION "3.8.8.1" +#define SQLITE_VERSION_NUMBER 3008008 +#define SQLITE_SOURCE_ID "2015-01-20 16:51:25 f73337e3e289915a76ca96e7a05a1a8d4e890d55" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -316,7 +372,7 @@ ** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but ** can be fully or partially disabled using a call to [sqlite3_config()] ** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD], -** or [SQLITE_CONFIG_MUTEX]. ^(The return value of the +** or [SQLITE_CONFIG_SERIALIZED]. ^(The return value of the ** sqlite3_threadsafe() function shows only the compile-time setting of ** thread safety, not any run-time changes to that setting made by ** sqlite3_config(). In other words, the return value from sqlite3_threadsafe() @@ -384,15 +440,15 @@ ** ** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors ** for the [sqlite3] object. -** ^Calls to sqlite3_close() and sqlite3_close_v2() return SQLITE_OK if +** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if ** the [sqlite3] object is successfully destroyed and all associated ** resources are deallocated. ** ** ^If the database connection is associated with unfinalized prepared ** statements or unfinished sqlite3_backup objects then sqlite3_close() ** will leave the database connection open and return [SQLITE_BUSY]. ** ^If sqlite3_close_v2() is called with unfinalized prepared statements -** and unfinished sqlite3_backups, then the database connection becomes +** and/or unfinished sqlite3_backups, then the database connection becomes ** an unusable "zombie" which will automatically be deallocated when the ** last prepared statement is finalized or the last sqlite3_backup is ** finished. The sqlite3_close_v2() interface is intended for use with @@ -405,7 +461,7 @@ ** with the [sqlite3] object prior to attempting to close the object. ^If ** sqlite3_close_v2() is called on a [database connection] that still has ** outstanding [prepared statements], [BLOB handles], and/or -** [sqlite3_backup] objects then it returns SQLITE_OK but the deallocation +** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation ** of resources is deferred until all [prepared statements], [BLOB handles], ** and [sqlite3_backup] objects are also destroyed. ** @@ -501,16 +557,14 @@ /* ** CAPI3REF: Result Codes -** KEYWORDS: SQLITE_OK {error code} {error codes} -** KEYWORDS: {result code} {result codes} +** KEYWORDS: {result code definitions} ** ** Many SQLite functions return an integer result code from the set shown ** here in order to indicate success or failure. ** ** New error codes may be added in future versions of SQLite. ** -** See also: [SQLITE_IOERR_READ | extended result codes], -** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK | result codes]. +** See also: [extended result code definitions] */ #define SQLITE_OK 0 /* Successful result */ /* beginning-of-error-codes */ @@ -548,26 +602,19 @@ /* ** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended error code} {extended error codes} -** KEYWORDS: {extended result code} {extended result codes} +** KEYWORDS: {extended result code definitions} ** -** In its default configuration, SQLite API routines return one of 26 integer -** [SQLITE_OK | result codes]. However, experience has shown that many of +** In its default configuration, SQLite API routines return one of 30 integer +** [result codes]. However, experience has shown that many of ** these result codes are too coarse-grained. They do not provide as ** much information about problems as programmers might like. In an effort to ** address this, newer versions of SQLite (version 3.3.8 and later) include ** support for additional result codes that provide more detailed information -** about errors. The extended result codes are enabled or disabled +** about errors. These [extended result codes] are enabled or disabled ** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. -** -** Some of the available extended result codes are listed here. -** One may expect the number of extended result codes will increase -** over time. Software that uses extended result codes should expect -** to see new result codes in future releases of SQLite. -** -** The SQLITE_OK result code will never be extended. It will always -** be exactly zero. +** [sqlite3_extended_result_codes()] API. Or, the extended code for +** the most recent error can be obtained using +** [sqlite3_extended_errcode()]. */ #define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) #define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) @@ -621,6 +668,7 @@ #define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8)) #define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8)) #define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8)) +#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8)) /* ** CAPI3REF: Flags For File Open Operations @@ -675,7 +723,10 @@ ** file that were written at the application level might have changed ** and that adjacent bytes, even bytes within the same sector are ** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN -** flag indicate that a file cannot be deleted when open. +** flag indicate that a file cannot be deleted when open. The +** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on +** read-only media and cannot be changed even by processes with +** elevated privileges. */ #define SQLITE_IOCAP_ATOMIC 0x00000001 #define SQLITE_IOCAP_ATOMIC512 0x00000002 @@ -690,6 +741,7 @@ #define SQLITE_IOCAP_SEQUENTIAL 0x00000400 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 +#define SQLITE_IOCAP_IMMUTABLE 0x00002000 /* ** CAPI3REF: File Locking Levels @@ -796,7 +848,7 @@ ** locking strategy (for example to use dot-file locks), to inquire ** about the status of a lock, or to break stale locks. The SQLite ** core reserves all opcodes less than 100 for its own use. -** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available. +** A [file control opcodes | list of opcodes] less than 100 is available. ** Applications that define a custom xFileControl method should use opcodes ** greater than 100 to avoid conflicts. VFS implementations should ** return [SQLITE_NOTFOUND] for file control opcodes that they do not @@ -869,6 +921,7 @@ /* ** CAPI3REF: Standard File Control Opcodes +** KEYWORDS: {file control opcodes} {file control opcode} ** ** These integer constants are opcodes for the xFileControl method ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] @@ -1058,6 +1111,12 @@ ** on whether or not the file has been renamed, moved, or deleted since it ** was first opened. ** +**
  • [[SQLITE_FCNTL_WIN32_SET_HANDLE]] +** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This +** opcode causes the xFileControl method to swap the file handle with the one +** pointed to by the pArg argument. This capability is used during testing +** and only needs to be supported when SQLITE_TEST is defined. +** ** */ #define SQLITE_FCNTL_LOCKSTATE 1 @@ -1081,6 +1140,7 @@ #define SQLITE_FCNTL_HAS_MOVED 20 #define SQLITE_FCNTL_SYNC 21 #define SQLITE_FCNTL_COMMIT_PHASETWO 22 +#define SQLITE_FCNTL_WIN32_SET_HANDLE 23 /* ** CAPI3REF: Mutex Handle @@ -1332,7 +1392,7 @@ ** ** ** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as -** was given no the corresponding lock. +** was given on the corresponding lock. ** ** The xShmLock method can transition between unlocked and SHARED or ** between unlocked and EXCLUSIVE. It cannot transition between SHARED @@ -1615,26 +1675,28 @@ ** SQLITE_CONFIG_SERIALIZED configuration option. ** ** [[SQLITE_CONFIG_MALLOC]]
    SQLITE_CONFIG_MALLOC
    -**
    ^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mem_methods] structure. The argument specifies +**
    ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is +** a pointer to an instance of the [sqlite3_mem_methods] structure. +** The argument specifies ** alternative low-level memory allocation routines to be used in place of ** the memory allocation routines built into SQLite.)^ ^SQLite makes ** its own private copy of the content of the [sqlite3_mem_methods] structure ** before the [sqlite3_config()] call returns.
    ** ** [[SQLITE_CONFIG_GETMALLOC]]
    SQLITE_CONFIG_GETMALLOC
    -**
    ^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods] +**
    ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which +** is a pointer to an instance of the [sqlite3_mem_methods] structure. +** The [sqlite3_mem_methods] ** structure is filled with the currently defined memory allocation routines.)^ ** This option can be used to overload the default memory allocation ** routines with a wrapper that simulations memory allocation failure or ** tracks memory usage, for example.
    ** ** [[SQLITE_CONFIG_MEMSTATUS]]
    SQLITE_CONFIG_MEMSTATUS
    -**
    ^This option takes single argument of type int, interpreted as a -** boolean, which enables or disables the collection of memory allocation -** statistics. ^(When memory allocation statistics are disabled, the -** following SQLite interfaces become non-operational: +**
    ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int, +** interpreted as a boolean, which enables or disables the collection of +** memory allocation statistics. ^(When memory allocation statistics are +** disabled, the following SQLite interfaces become non-operational: **
    ** ** [[SQLITE_CONFIG_SCRATCH]]
    SQLITE_CONFIG_SCRATCH
    -**
    ^This option specifies a static memory buffer that SQLite can use for -** scratch memory. There are three arguments: A pointer an 8-byte +**
    ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer +** that SQLite can use for scratch memory. ^(There are three arguments +** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte ** aligned memory buffer from which the scratch allocations will be ** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N). The sz -** argument must be a multiple of 16. +** and the maximum number of scratch allocations (N).)^ ** The first argument must be a pointer to an 8-byte aligned buffer ** of at least sz*N bytes of memory. -** ^SQLite will use no more than two scratch buffers per thread. So -** N should be set to twice the expected maximum number of threads. -** ^SQLite will never require a scratch buffer that is more than 6 -** times the database page size. ^If SQLite needs needs additional +** ^SQLite will not use more than one scratch buffers per thread. +** ^SQLite will never request a scratch buffer that is more than 6 +** times the database page size. +** ^If SQLite needs needs additional ** scratch memory beyond what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.
    +** [sqlite3_malloc()] will be used to obtain the memory needed.

    +** ^When the application provides any amount of scratch memory using +** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large +** [sqlite3_malloc|heap allocations]. +** This can help [Robson proof|prevent memory allocation failures] due to heap +** fragmentation in low-memory embedded systems. +** ** ** [[SQLITE_CONFIG_PAGECACHE]]

    SQLITE_CONFIG_PAGECACHE
    -**
    ^This option specifies a static memory buffer that SQLite can use for -** the database page cache with the default page cache implementation. +**
    ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer +** that SQLite can use for the database page cache with the default page +** cache implementation. ** This configuration should not be used if an application-define page -** cache implementation is loaded using the SQLITE_CONFIG_PCACHE2 option. -** There are three arguments to this option: A pointer to 8-byte aligned +** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2] +** configuration option. +** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to +** 8-byte aligned ** memory, the size of each page buffer (sz), and the number of pages (N). ** The sz argument should be the size of the largest database page -** (a power of two between 512 and 32768) plus a little extra for each -** page header. ^The page header size is 20 to 40 bytes depending on -** the host architecture. ^It is harmless, apart from the wasted memory, -** to make sz a little too large. The first -** argument should point to an allocation of at least sz*N bytes of memory. +** (a power of two between 512 and 65536) plus some extra bytes for each +** page header. ^The number of extra bytes needed by the page header +** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option +** to [sqlite3_config()]. +** ^It is harmless, apart from the wasted memory, +** for the sz parameter to be larger than necessary. The first +** argument should pointer to an 8-byte aligned block of memory that +** is at least sz*N bytes of memory, otherwise subsequent behavior is +** undefined. ** ^SQLite will use the memory provided by the first argument to satisfy its ** memory needs for the first N pages that it adds to cache. ^If additional ** page cache memory is needed beyond what is provided by this option, then -** SQLite goes to [sqlite3_malloc()] for the additional storage space. -** The pointer in the first argument must -** be aligned to an 8-byte boundary or subsequent behavior of SQLite -** will be undefined.
    +** SQLite goes to [sqlite3_malloc()] for the additional storage space. ** ** [[SQLITE_CONFIG_HEAP]]
    SQLITE_CONFIG_HEAP
    -**
    ^This option specifies a static memory buffer that SQLite will use -** for all of its dynamic memory allocation needs beyond those provided -** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE]. -** There are three arguments: An 8-byte aligned pointer to the memory, +**
    ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer +** that SQLite will use for all of its dynamic memory allocation needs +** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and +** [SQLITE_CONFIG_PAGECACHE]. +** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled +** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns +** [SQLITE_ERROR] if invoked otherwise. +** ^There are three arguments to SQLITE_CONFIG_HEAP: +** An 8-byte aligned pointer to the memory, ** the number of bytes in the memory buffer, and the minimum allocation size. ** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts ** to using its default memory allocator (the system malloc() implementation), ** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the -** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or -** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory +** memory pointer is not NULL then the alternative memory ** allocator is engaged to handle all of SQLites memory allocation needs. ** The first pointer (the memory pointer) must be aligned to an 8-byte ** boundary or subsequent behavior of SQLite will be undefined. ** The minimum allocation size is capped at 2**12. Reasonable values ** for the minimum allocation size are 2**5 through 2**8.
    ** ** [[SQLITE_CONFIG_MUTEX]]
    SQLITE_CONFIG_MUTEX
    -**
    ^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mutex_methods] structure. The argument specifies -** alternative low-level mutex routines to be used in place -** the mutex routines built into SQLite.)^ ^SQLite makes a copy of the -** content of the [sqlite3_mutex_methods] structure before the call to +**
    ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a +** pointer to an instance of the [sqlite3_mutex_methods] structure. +** The argument specifies alternative low-level mutex routines to be used +** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of +** the content of the [sqlite3_mutex_methods] structure before the call to ** [sqlite3_config()] returns. ^If SQLite is compiled with ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then ** the entire mutexing subsystem is omitted from the build and hence calls to ** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will ** return [SQLITE_ERROR].
    ** ** [[SQLITE_CONFIG_GETMUTEX]]
    SQLITE_CONFIG_GETMUTEX
    -**
    ^(This option takes a single argument which is a pointer to an -** instance of the [sqlite3_mutex_methods] structure. The +**
    ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which +** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The ** [sqlite3_mutex_methods] ** structure is filled with the currently defined mutex routines.)^ ** This option can be used to overload the default mutex allocation @@ -1726,25 +1802,25 @@ ** return [SQLITE_ERROR].
    ** ** [[SQLITE_CONFIG_LOOKASIDE]]
    SQLITE_CONFIG_LOOKASIDE
    -**
    ^(This option takes two arguments that determine the default -** memory allocation for the lookaside memory allocator on each -** [database connection]. The first argument is the +**
    ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine +** the default size of lookaside memory on each [database connection]. +** The first argument is the ** size of each lookaside buffer slot and the second is the number of -** slots allocated to each database connection.)^ ^(This option sets the -** default lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE] -** verb to [sqlite3_db_config()] can be used to change the lookaside +** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE +** sets the default lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE] +** option to [sqlite3_db_config()] can be used to change the lookaside ** configuration on individual connections.)^
    ** ** [[SQLITE_CONFIG_PCACHE2]]
    SQLITE_CONFIG_PCACHE2
    -**
    ^(This option takes a single argument which is a pointer to -** an [sqlite3_pcache_methods2] object. This object specifies the interface -** to a custom page cache implementation.)^ ^SQLite makes a copy of the -** object and uses it for page cache memory allocations.
    +**
    ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is +** a pointer to an [sqlite3_pcache_methods2] object. This object specifies +** the interface to a custom page cache implementation.)^ +** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.
    ** ** [[SQLITE_CONFIG_GETPCACHE2]]
    SQLITE_CONFIG_GETPCACHE2
    -**
    ^(This option takes a single argument which is a pointer to an -** [sqlite3_pcache_methods2] object. SQLite copies of the current -** page cache implementation into that object.)^
    +**
    ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which +** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of +** the current page cache implementation into that object.)^
    ** ** [[SQLITE_CONFIG_LOG]]
    SQLITE_CONFIG_LOG
    **
    The SQLITE_CONFIG_LOG option is used to configure the SQLite @@ -1767,10 +1843,11 @@ ** function must be threadsafe.
    ** ** [[SQLITE_CONFIG_URI]]
    SQLITE_CONFIG_URI -**
    ^(This option takes a single argument of type int. If non-zero, then -** URI handling is globally enabled. If the parameter is zero, then URI handling -** is globally disabled.)^ ^If URI handling is globally enabled, all filenames -** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or +**
    ^(The SQLITE_CONFIG_URI option takes a single argument of type int. +** If non-zero, then URI handling is globally enabled. If the parameter is zero, +** then URI handling is globally disabled.)^ ^If URI handling is globally +** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()], +** [sqlite3_open16()] or ** specified as part of [ATTACH] commands are interpreted as URIs, regardless ** of whether or not the [SQLITE_OPEN_URI] flag is set when the database ** connection is opened. ^If it is globally disabled, filenames are @@ -1780,9 +1857,10 @@ ** [SQLITE_USE_URI] symbol defined.)^ ** ** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]]
    SQLITE_CONFIG_COVERING_INDEX_SCAN -**
    ^This option takes a single integer argument which is interpreted as -** a boolean in order to enable or disable the use of covering indices for -** full table scans in the query optimizer. ^The default setting is determined +**
    ^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer +** argument which is interpreted as a boolean in order to enable or disable +** the use of covering indices for full table scans in the query optimizer. +** ^The default setting is determined ** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on" ** if that compile-time option is omitted. ** The ability to disable the use of covering indices for full table scans @@ -1822,19 +1900,39 @@ ** ^The default setting can be overridden by each database connection using ** either the [PRAGMA mmap_size] command, or by using the ** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size -** cannot be changed at run-time. Nor may the maximum allowed mmap size -** exceed the compile-time maximum mmap size set by the +** will be silently truncated if necessary so that it does not exceed the +** compile-time maximum mmap size set by the ** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^ ** ^If either argument to this option is negative, then that argument is ** changed to its compile-time default. ** ** [[SQLITE_CONFIG_WIN32_HEAPSIZE]] **
    SQLITE_CONFIG_WIN32_HEAPSIZE -**
    ^This option is only available if SQLite is compiled for Windows -** with the [SQLITE_WIN32_MALLOC] pre-processor macro defined. -** SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value +**
    ^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is +** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro +** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value ** that specifies the maximum size of the created heap. ** +** +** [[SQLITE_CONFIG_PCACHE_HDRSZ]] +**
    SQLITE_CONFIG_PCACHE_HDRSZ +**
    ^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which +** is a pointer to an integer and writes into that integer the number of extra +** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE]. +** The amount of extra space required can change depending on the compiler, +** target platform, and SQLite version. +** +** [[SQLITE_CONFIG_PMASZ]] +**
    SQLITE_CONFIG_PMASZ +**
    ^The SQLITE_CONFIG_PMASZ option takes a single parameter which +** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded +** sorter to that integer. The default minimum PMA Size is set by the +** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched +** to help with sort operations when multithreaded sorting +** is enabled (using the [PRAGMA threads] command) and the amount of content +** to be sorted exceeds the page size times the minimum of the +** [PRAGMA cache_size] setting and this value. +** */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ #define SQLITE_CONFIG_MULTITHREAD 2 /* nil */ @@ -1859,6 +1957,8 @@ #define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */ #define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */ #define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */ +#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */ +#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */ /* ** CAPI3REF: Database Connection Configuration Options @@ -1986,48 +2086,46 @@ /* ** CAPI3REF: Count The Number Of Rows Modified ** -** ^This function returns the number of database rows that were changed -** or inserted or deleted by the most recently completed SQL statement -** on the [database connection] specified by the first parameter. -** ^(Only changes that are directly specified by the [INSERT], [UPDATE], -** or [DELETE] statement are counted. Auxiliary changes caused by -** triggers or [foreign key actions] are not counted.)^ Use the -** [sqlite3_total_changes()] function to find the total number of changes -** including changes caused by triggers and foreign key actions. +** ^This function returns the number of rows modified, inserted or +** deleted by the most recently completed INSERT, UPDATE or DELETE +** statement on the database connection specified by the only parameter. +** ^Executing any other type of SQL statement does not modify the value +** returned by this function. ** -** ^Changes to a view that are simulated by an [INSTEAD OF trigger] -** are not counted. Only real table changes are counted. +** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are +** considered - auxiliary changes caused by [CREATE TRIGGER | triggers], +** [foreign key actions] or [REPLACE] constraint resolution are not counted. +** +** Changes to a view that are intercepted by +** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value +** returned by sqlite3_changes() immediately after an INSERT, UPDATE or +** DELETE statement run on a view is always zero. Only changes made to real +** tables are counted. ** -** ^(A "row change" is a change to a single row of a single table -** caused by an INSERT, DELETE, or UPDATE statement. Rows that -** are changed as side effects of [REPLACE] constraint resolution, -** rollback, ABORT processing, [DROP TABLE], or by any other -** mechanisms do not count as direct row changes.)^ +** Things are more complicated if the sqlite3_changes() function is +** executed while a trigger program is running. This may happen if the +** program uses the [changes() SQL function], or if some other callback +** function invokes sqlite3_changes() directly. Essentially: +** +** +** +** ^This means that if the changes() SQL function (or similar) is used +** by the first INSERT, UPDATE or DELETE statement within a trigger, it +** returns the value as set when the calling statement began executing. +** ^If it is used by the second or subsequent such statement within a trigger +** program, the value returned reflects the number of rows modified by the +** previous INSERT, UPDATE or DELETE statement within the same trigger. ** -** A "trigger context" is a scope of execution that begins and -** ends with the script of a [CREATE TRIGGER | trigger]. -** Most SQL statements are -** evaluated outside of any trigger. This is the "top level" -** trigger context. If a trigger fires from the top level, a -** new trigger context is entered for the duration of that one -** trigger. Subtriggers create subcontexts for their duration. -** -** ^Calling [sqlite3_exec()] or [sqlite3_step()] recursively does -** not create a new trigger context. -** -** ^This function returns the number of direct row changes in the -** most recent INSERT, UPDATE, or DELETE statement within the same -** trigger context. -** -** ^Thus, when called from the top level, this function returns the -** number of changes in the most recent INSERT, UPDATE, or DELETE -** that also occurred at the top level. ^(Within the body of a trigger, -** the sqlite3_changes() interface can be called to find the number of -** changes in the most recently completed INSERT, UPDATE, or DELETE -** statement within the body of the same trigger. -** However, the number returned does not include changes -** caused by subtriggers since those have their own context.)^ -** ** See also the [sqlite3_total_changes()] interface, the ** [count_changes pragma], and the [changes() SQL function]. ** @@ -2040,20 +2138,17 @@ /* ** CAPI3REF: Total Number Of Rows Modified ** -** ^This function returns the number of row changes caused by [INSERT], -** [UPDATE] or [DELETE] statements since the [database connection] was opened. -** ^(The count returned by sqlite3_total_changes() includes all changes -** from all [CREATE TRIGGER | trigger] contexts and changes made by -** [foreign key actions]. However, -** the count does not include changes used to implement [REPLACE] constraints, -** do rollbacks or ABORT processing, or [DROP TABLE] processing. The -** count does not include rows of views that fire an [INSTEAD OF trigger], -** though if the INSTEAD OF trigger makes changes of its own, those changes -** are counted.)^ -** ^The sqlite3_total_changes() function counts the changes as soon as -** the statement that makes them is completed (when the statement handle -** is passed to [sqlite3_reset()] or [sqlite3_finalize()]). -** +** ^This function returns the total number of rows inserted, modified or +** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed +** since the database connection was opened, including those executed as +** part of trigger programs. ^Executing any other type of SQL statement +** does not affect the value returned by sqlite3_total_changes(). +** +** ^Changes made as part of [foreign key actions] are included in the +** count, but those made as part of REPLACE constraint resolution are +** not. ^Changes to a view that are intercepted by INSTEAD OF triggers +** are not counted. +** ** See also the [sqlite3_changes()] interface, the ** [count_changes pragma], and the [total_changes() SQL function]. ** @@ -2140,28 +2235,35 @@ /* ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors +** KEYWORDS: {busy-handler callback} {busy handler} ** -** ^This routine sets a callback function that might be invoked whenever -** an attempt is made to open a database table that another thread -** or process has locked. +** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X +** that might be invoked with argument P whenever +** an attempt is made to access a database table associated with +** [database connection] D when another thread +** or process has the table locked. +** The sqlite3_busy_handler() interface is used to implement +** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout]. ** -** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] +** ^If the busy callback is NULL, then [SQLITE_BUSY] ** is returned immediately upon encountering the lock. ^If the busy callback ** is not NULL, then the callback might be invoked with two arguments. ** ** ^The first argument to the busy handler is a copy of the void* pointer which ** is the third argument to sqlite3_busy_handler(). ^The second argument to ** the busy handler callback is the number of times that the busy handler has -** been invoked for this locking event. ^If the +** been invoked previously for the same locking event. ^If the ** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned. +** access the database and [SQLITE_BUSY] is returned +** to the application. ** ^If the callback returns non-zero, then another attempt -** is made to open the database for reading and the cycle repeats. +** is made to access the database and the cycle repeats. ** ** The presence of a busy handler does not guarantee that it will be invoked ** when there is lock contention. ^If SQLite determines that invoking the busy ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler. +** to the application instead of invoking the +** busy handler. ** Consider a scenario where one process is holding a read lock that ** it is trying to promote to a reserved lock and ** a second process is holding a reserved lock that it is trying @@ -2175,28 +2277,15 @@ ** ** ^The default busy callback is NULL. ** -** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED] -** when SQLite is in the middle of a large transaction where all the -** changes will not fit into the in-memory cache. SQLite will -** already hold a RESERVED lock on the database file, but it needs -** to promote this lock to EXCLUSIVE so that it can spill cache -** pages into the database file without harm to concurrent -** readers. ^If it is unable to promote the lock, then the in-memory -** cache will be left in an inconsistent state and so the error -** code is promoted from the relatively benign [SQLITE_BUSY] to -** the more severe [SQLITE_IOERR_BLOCKED]. ^This error code promotion -** forces an automatic rollback of the changes. See the -** -** CorruptionFollowingBusyError wiki page for a discussion of why -** this is important. -** ** ^(There can only be a single busy handler defined for each ** [database connection]. Setting a new busy handler clears any ** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** will also set or clear the busy handler. +** or evaluating [PRAGMA busy_timeout=N] will change the +** busy handler and thus clear any previously set busy handler. ** ** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. Any such actions +** database connection that invoked the busy handler. In other words, +** the busy handler is not reentrant. Any such actions ** result in undefined behavior. ** ** A busy handler must not close the database connection @@ -2212,15 +2301,17 @@ ** will sleep multiple times until at least "ms" milliseconds of sleeping ** have accumulated. ^After at least "ms" milliseconds of sleeping, ** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]. +** [SQLITE_BUSY]. ** ** ^Calling this routine with an argument less than or equal to zero ** turns off all busy handlers. ** ** ^(There can only be a single busy handler for a particular -** [database connection] any any given moment. If another busy handler +** [database connection] at any given moment. If another busy handler ** was defined (using [sqlite3_busy_handler()]) prior to calling ** this routine, that other busy handler is cleared.)^ +** +** See also: [PRAGMA busy_timeout] */ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms); @@ -2420,6 +2511,10 @@ ** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns ** a NULL pointer. ** +** ^The sqlite3_malloc64(N) routine works just like +** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead +** of a signed 32-bit integer. +** ** ^Calling sqlite3_free() with a pointer previously returned ** by sqlite3_malloc() or sqlite3_realloc() releases that memory so ** that it might be reused. ^The sqlite3_free() routine is @@ -2431,24 +2526,38 @@ ** might result if sqlite3_free() is called with a non-NULL pointer that ** was not obtained from sqlite3_malloc() or sqlite3_realloc(). ** -** ^(The sqlite3_realloc() interface attempts to resize a -** prior memory allocation to be at least N bytes, where N is the -** second parameter. The memory allocation to be resized is the first -** parameter.)^ ^ If the first parameter to sqlite3_realloc() +** ^The sqlite3_realloc(X,N) interface attempts to resize a +** prior memory allocation X to be at least N bytes. +** ^If the X parameter to sqlite3_realloc(X,N) ** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc(). -** ^If the second parameter to sqlite3_realloc() is zero or +** sqlite3_malloc(N). +** ^If the N parameter to sqlite3_realloc(X,N) is zero or ** negative then the behavior is exactly the same as calling -** sqlite3_free(P) where P is the first parameter to sqlite3_realloc(). -** ^sqlite3_realloc() returns a pointer to a memory allocation -** of at least N bytes in size or NULL if sufficient memory is unavailable. +** sqlite3_free(X). +** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation +** of at least N bytes in size or NULL if insufficient memory is available. ** ^If M is the size of the prior allocation, then min(N,M) bytes ** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc() and the prior allocation is freed. -** ^If sqlite3_realloc() returns NULL, then the prior allocation -** is not freed. +** by sqlite3_realloc(X,N) and the prior allocation is freed. +** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the +** prior allocation is not freed. ** -** ^The memory returned by sqlite3_malloc() and sqlite3_realloc() +** ^The sqlite3_realloc64(X,N) interfaces works the same as +** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead +** of a 32-bit signed integer. +** +** ^If X is a memory allocation previously obtained from sqlite3_malloc(), +** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then +** sqlite3_msize(X) returns the size of that memory allocation in bytes. +** ^The value returned by sqlite3_msize(X) might be larger than the number +** of bytes requested when X was allocated. ^If X is a NULL pointer then +** sqlite3_msize(X) returns zero. If X points to something that is not +** the beginning of memory allocation, or if it points to a formerly +** valid memory allocation that has now been freed, then the behavior +** of sqlite3_msize(X) is undefined and possibly harmful. +** +** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(), +** sqlite3_malloc64(), and sqlite3_realloc64() ** is always aligned to at least an 8 byte boundary, or to a ** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time ** option is used. @@ -2476,8 +2585,11 @@ ** [sqlite3_free()] or [sqlite3_realloc()]. */ SQLITE_API void *sqlite3_malloc(int); +SQLITE_API void *sqlite3_malloc64(sqlite3_uint64); SQLITE_API void *sqlite3_realloc(void*, int); +SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64); SQLITE_API void sqlite3_free(void*); +SQLITE_API sqlite3_uint64 sqlite3_msize(void*); /* ** CAPI3REF: Memory Allocator Statistics @@ -2515,13 +2627,14 @@ ** applications to access the same PRNG for other purposes. ** ** ^A call to this routine stores N bytes of randomness into buffer P. -** ^If N is less than one, then P can be a NULL pointer. +** ^The P parameter can be a NULL pointer. ** ** ^If this routine has not been previously called or if the previous -** call had N less than one, then the PRNG is seeded using randomness -** obtained from the xRandomness method of the default [sqlite3_vfs] object. -** ^If the previous call to this routine had an N of 1 or more then -** the pseudo-randomness is generated +** call had N less than one or a NULL pointer for P, then the PRNG is +** seeded using randomness obtained from the xRandomness method of +** the default [sqlite3_vfs] object. +** ^If the previous call to this routine had an N of 1 or more and a +** non-NULL P then the pseudo-randomness is generated ** internally and without recourse to the [sqlite3_vfs] xRandomness ** method. */ @@ -2622,8 +2735,8 @@ ** [sqlite3_set_authorizer | authorizer documentation] for additional ** information. ** -** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK | return code] -** from the [sqlite3_vtab_on_conflict()] interface. +** Note that SQLITE_IGNORE is also used as a [conflict resolution mode] +** returned from the [sqlite3_vtab_on_conflict()] interface. */ #define SQLITE_DENY 1 /* Abort the SQL statement with an error */ #define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */ @@ -2764,9 +2877,9 @@ ** an English language description of the error following a failure of any ** of the sqlite3_open() routines. ** -** ^The default encoding for the database will be UTF-8 if -** sqlite3_open() or sqlite3_open_v2() is called and -** UTF-16 in the native byte order if sqlite3_open16() is used. +** ^The default encoding will be UTF-8 for databases created using +** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases +** created using sqlite3_open16() will be UTF-16 in the native byte order. ** ** Whether or not an error occurs when it is opened, resources ** associated with the [database connection] handle should be released by @@ -2854,13 +2967,14 @@ ** then it is interpreted as an absolute path. ^If the path does not begin ** with a '/' (meaning that the authority section is omitted from the URI) ** then the path is interpreted as a relative path. -** ^On windows, the first component of an absolute path -** is a drive specification (e.g. "C:"). +** ^(On windows, the first component of an absolute path +** is a drive specification (e.g. "C:").)^ ** ** [[core URI query parameters]] ** The query component of a URI may contain parameters that are interpreted ** either by SQLite itself, or by a [VFS | custom VFS implementation]. -** SQLite interprets the following three query parameters: +** SQLite and its built-in [VFSes] interpret the +** following query parameters: ** ** ** ** ^Specifying an unknown parameter in the query component of a URI is not an @@ -2923,8 +3059,9 @@ ** Open file "data.db" in the current directory for read-only access. ** Regardless of whether or not shared-cache mode is enabled by ** default, use a private cache. -** file:/home/fred/data.db?vfs=unix-nolock -** Open file "/home/fred/data.db". Use the special VFS "unix-nolock". +** file:/home/fred/data.db?vfs=unix-dotfile +** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile" +** that uses dot-files in place of posix advisory locking. ** file:data.db?mode=readonly ** An error. "readonly" is not a valid option for the "mode" parameter. ** @@ -3170,6 +3307,10 @@ ** ** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(
    SQLITE_LIMIT_TRIGGER_DEPTH
    **
    The maximum depth of recursion for triggers.
    )^ +** +** [[SQLITE_LIMIT_WORKER_THREADS]] ^(
    SQLITE_LIMIT_WORKER_THREADS
    +**
    The maximum number of auxiliary worker threads that a single +** [prepared statement] may start.
    )^ ** */ #define SQLITE_LIMIT_LENGTH 0 @@ -3183,6 +3324,7 @@ #define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8 #define SQLITE_LIMIT_VARIABLE_NUMBER 9 #define SQLITE_LIMIT_TRIGGER_DEPTH 10 +#define SQLITE_LIMIT_WORKER_THREADS 11 /* ** CAPI3REF: Compiling An SQL Statement @@ -3456,25 +3598,33 @@ ** If the fourth parameter to sqlite3_bind_blob() is negative, then ** the behavior is undefined. ** If a non-negative fourth parameter is provided to sqlite3_bind_text() -** or sqlite3_bind_text16() then that parameter must be the byte offset +** or sqlite3_bind_text16() or sqlite3_bind_text64() then +** that parameter must be the byte offset ** where the NUL terminator would occur assuming the string were NUL ** terminated. If any NUL characters occur at byte offsets less than ** the value of the fourth parameter then the resulting string value will ** contain embedded NULs. The result of expressions involving strings ** with embedded NULs is undefined. ** -** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and -** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or +** ^The fifth argument to the BLOB and string binding interfaces +** is a destructor used to dispose of the BLOB or ** string after SQLite has finished with it. ^The destructor is called -** to dispose of the BLOB or string even if the call to sqlite3_bind_blob(), -** sqlite3_bind_text(), or sqlite3_bind_text16() fails. +** to dispose of the BLOB or string even if the call to bind API fails. ** ^If the fifth argument is ** the special value [SQLITE_STATIC], then SQLite assumes that the ** information is in static, unmanaged space and does not need to be freed. ** ^If the fifth argument has the value [SQLITE_TRANSIENT], then ** SQLite makes its own private copy of the data immediately, before ** the sqlite3_bind_*() routine returns. ** +** ^The sixth argument to sqlite3_bind_text64() must be one of +** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE] +** to specify the encoding of the text in the third parameter. If +** the sixth argument to sqlite3_bind_text64() is not one of the +** allowed values shown above, or if the text encoding is different +** from the encoding specified by the sixth parameter, then the behavior +** is undefined. +** ** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that ** is filled with zeroes. ^A zeroblob uses a fixed amount of memory ** (just an integer to hold its size) while it is being processed. @@ -3495,19 +3645,26 @@ ** ** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an ** [error code] if anything goes wrong. +** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB +** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or +** [SQLITE_MAX_LENGTH]. ** ^[SQLITE_RANGE] is returned if the parameter ** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. ** ** See also: [sqlite3_bind_parameter_count()], ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. */ SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*)); +SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64, + void(*)(void*)); SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double); SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int); SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int); -SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*)); +SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*)); SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*)); +SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64, + void(*)(void*), unsigned char encoding); SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); @@ -4199,9 +4356,9 @@ ** These constant define integer codes that represent the various ** text encodings supported by SQLite. */ -#define SQLITE_UTF8 1 -#define SQLITE_UTF16LE 2 -#define SQLITE_UTF16BE 3 +#define SQLITE_UTF8 1 /* IMP: R-37514-35566 */ +#define SQLITE_UTF16LE 2 /* IMP: R-03371-37637 */ +#define SQLITE_UTF16BE 3 /* IMP: R-51971-34154 */ #define SQLITE_UTF16 4 /* Use native byte order */ #define SQLITE_ANY 5 /* Deprecated */ #define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ @@ -4256,7 +4413,7 @@ ** object results in undefined behavior. ** ** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object +** except that these routines take a single [protected sqlite3_value] object ** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. ** ** ^The sqlite3_value_text16() interface extracts a UTF-16 string @@ -4503,6 +4660,10 @@ ** set the return value of the application-defined function to be ** a text string which is represented as UTF-8, UTF-16 native byte order, ** UTF-16 little endian, or UTF-16 big endian, respectively. +** ^The sqlite3_result_text64() interface sets the return value of an +** application-defined function to be a text string in an encoding +** specified by the fifth (and last) parameter, which must be one +** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]. ** ^SQLite takes the text result from the application from ** the 2nd parameter of the sqlite3_result_text* interfaces. ** ^If the 3rd parameter to the sqlite3_result_text* interfaces @@ -4546,6 +4707,8 @@ ** the [sqlite3_context] pointer, the results are undefined. */ SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*)); +SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*, + sqlite3_uint64,void(*)(void*)); SQLITE_API void sqlite3_result_double(sqlite3_context*, double); SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int); SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int); @@ -4556,6 +4719,8 @@ SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); SQLITE_API void sqlite3_result_null(sqlite3_context*); SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*)); +SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64, + void(*)(void*), unsigned char encoding); SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*)); SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); @@ -4785,6 +4950,13 @@ ** is a NULL pointer, then SQLite performs a search for an appropriate ** temporary file directory. ** +** Applications are strongly discouraged from using this global variable. +** It is required to set a temporary folder on Windows Runtime (WinRT). +** But for all other platforms, it is highly recommended that applications +** neither read nor write this variable. This global variable is a relic +** that exists for backwards compatibility of legacy applications and should +** be avoided in new projects. +** ** It is not safe to read or modify this variable in more than one ** thread at a time. It is not safe to read or modify this variable ** if a [database connection] is being used at the same time in a separate @@ -4803,6 +4975,11 @@ ** Hence, if this variable is modified directly, either it should be ** made NULL or made to point to memory obtained from [sqlite3_malloc] ** or else the use of the [temp_store_directory pragma] should be avoided. +** Except when requested by the [temp_store_directory pragma], SQLite +** does not free the memory that sqlite3_temp_directory points to. If +** the application wants that memory to be freed, it must do +** so itself, taking care to only do so after all [database connection] +** objects have been destroyed. ** ** Note to Windows Runtime users: The temporary directory must be set ** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various @@ -5163,20 +5340,27 @@ /* ** CAPI3REF: Extract Metadata About A Column Of A Table ** -** ^This routine returns metadata about a specific column of a specific -** database table accessible using the [database connection] handle -** passed as the first function argument. +** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns +** information about column C of table T in database D +** on [database connection] X.)^ ^The sqlite3_table_column_metadata() +** interface returns SQLITE_OK and fills in the non-NULL pointers in +** the final five arguments with appropriate values if the specified +** column exists. ^The sqlite3_table_column_metadata() interface returns +** SQLITE_ERROR and if the specified column does not exist. +** ^If the column-name parameter to sqlite3_table_column_metadata() is a +** NULL pointer, then this routine simply checks for the existance of the +** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it +** does not. ** ** ^The column is identified by the second, third and fourth parameters to -** this function. ^The second parameter is either the name of the database +** this function. ^(The second parameter is either the name of the database ** (i.e. "main", "temp", or an attached database) containing the specified -** table or NULL. ^If it is NULL, then all attached databases are searched +** table or NULL.)^ ^If it is NULL, then all attached databases are searched ** for the table using the same algorithm used by the database engine to ** resolve unqualified table references. ** ** ^The third and fourth parameters to this function are the table and column -** name of the desired column, respectively. Neither of these parameters -** may be NULL. +** name of the desired column, respectively. ** ** ^Metadata is returned by writing to the memory locations passed as the 5th ** and subsequent parameters to this function. ^Any of these arguments may be @@ -5195,16 +5379,17 @@ ** )^ ** ** ^The memory pointed to by the character pointers returned for the -** declaration type and collation sequence is valid only until the next +** declaration type and collation sequence is valid until the next ** call to any SQLite API function. ** ** ^If the specified table is actually a view, an [error code] is returned. ** -** ^If the specified column is "rowid", "oid" or "_rowid_" and an +** ^If the specified column is "rowid", "oid" or "_rowid_" and the table +** is not a [WITHOUT ROWID] table and an ** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output ** parameters are set for the explicitly declared column. ^(If there is no -** explicitly declared [INTEGER PRIMARY KEY] column, then the output -** parameters are set as follows: +** [INTEGER PRIMARY KEY] column, then the outputs +** for the [rowid] are set as follows: ** ** 
     **     data type: "INTEGER"
@@ -5214,13 +5399,9 @@
 **     auto increment: 0
 **
    )^ ** -** ^(This function may load one or more schemas from database files. If an -** error occurs during this process, or if the requested table or column -** cannot be found, an [error code] is returned and an error message left -** in the [database connection] (to be retrieved using sqlite3_errmsg()).)^ -** -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined. +** ^This function causes all database schemas to be read from disk and +** parsed, if that has not already been done, and returns an error if +** any errors are encountered while loading the schema. */ SQLITE_API int sqlite3_table_column_metadata( sqlite3 *db, /* Connection handle */ @@ -5673,27 +5854,43 @@ ** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow; ** )^ ** +** ^(Parameter zDb is not the filename that contains the database, but +** rather the symbolic name of the database. For attached databases, this is +** the name that appears after the AS keyword in the [ATTACH] statement. +** For the main database file, the database name is "main". For TEMP +** tables, the database name is "temp".)^ +** ** ^If the flags parameter is non-zero, then the BLOB is opened for read -** and write access. ^If it is zero, the BLOB is opened for read access. -** ^It is not possible to open a column that is part of an index or primary -** key for writing. ^If [foreign key constraints] are enabled, it is -** not possible to open a column that is part of a [child key] for writing. +** and write access. ^If the flags parameter is zero, the BLOB is opened for +** read-only access. ** -** ^Note that the database name is not the filename that contains -** the database but rather the symbolic name of the database that -** appears after the AS keyword when the database is connected using [ATTACH]. -** ^For the main database file, the database name is "main". -** ^For TEMP tables, the database name is "temp". +** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored +** in *ppBlob. Otherwise an [error code] is returned and, unless the error +** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided +** the API is not misused, it is always safe to call [sqlite3_blob_close()] +** on *ppBlob after this function it returns. ** -** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is written -** to *ppBlob. Otherwise an [error code] is returned and *ppBlob is set -** to be a null pointer.)^ -** ^This function sets the [database connection] error code and message -** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()] and related -** functions. ^Note that the *ppBlob variable is always initialized in a -** way that makes it safe to invoke [sqlite3_blob_close()] on *ppBlob -** regardless of the success or failure of this routine. +** This function fails with SQLITE_ERROR if any of the following are true: +** ** +** ^Unless it returns SQLITE_MISUSE, this function sets the +** [database connection] error code and message accessible via +** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. +** +** ** ^(If the row that a BLOB handle points to is modified by an ** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects ** then the BLOB handle is marked as "expired". @@ -5710,13 +5907,9 @@ ** interface. Use the [UPDATE] SQL command to change the size of a ** blob. ** -** ^The [sqlite3_blob_open()] interface will fail for a [WITHOUT ROWID] -** table. Incremental BLOB I/O is not possible on [WITHOUT ROWID] tables. -** ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces -** and the built-in [zeroblob] SQL function can be used, if desired, -** to create an empty, zero-filled blob in which to read or write using -** this interface. +** and the built-in [zeroblob] SQL function may be used to create a +** zero-filled blob to read or write using the incremental-blob interface. ** ** To avoid a resource leak, every open [BLOB handle] should eventually ** be released by a call to [sqlite3_blob_close()]. @@ -5758,24 +5951,22 @@ /* ** CAPI3REF: Close A BLOB Handle ** -** ^Closes an open [BLOB handle]. +** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed +** unconditionally. Even if this routine returns an error code, the +** handle is still closed.)^ ** -** ^Closing a BLOB shall cause the current transaction to commit -** if there are no other BLOBs, no pending prepared statements, and the -** database connection is in [autocommit mode]. -** ^If any writes were made to the BLOB, they might be held in cache -** until the close operation if they will fit. +** ^If the blob handle being closed was opened for read-write access, and if +** the database is in auto-commit mode and there are no other open read-write +** blob handles or active write statements, the current transaction is +** committed. ^If an error occurs while committing the transaction, an error +** code is returned and the transaction rolled back. ** -** ^(Closing the BLOB often forces the changes -** out to disk and so if any I/O errors occur, they will likely occur -** at the time when the BLOB is closed. Any errors that occur during -** closing are reported as a non-zero return value.)^ -** -** ^(The BLOB is closed unconditionally. Even if this routine returns -** an error code, the BLOB is still closed.)^ -** -** ^Calling this routine with a null pointer (such as would be returned -** by a failed call to [sqlite3_blob_open()]) is a harmless no-op. +** Calling this function with an argument that is not a NULL pointer or an +** open blob handle results in undefined behaviour. ^Calling this routine +** with a null pointer (such as would be returned by a failed call to +** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function +** is passed a valid open blob handle, the values returned by the +** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning. */ SQLITE_API int sqlite3_blob_close(sqlite3_blob *); @@ -5825,21 +6016,27 @@ /* ** CAPI3REF: Write Data Into A BLOB Incrementally ** -** ^This function is used to write data into an open [BLOB handle] from a -** caller-supplied buffer. ^N bytes of data are copied from the buffer Z -** into the open BLOB, starting at offset iOffset. +** ^(This function is used to write data into an open [BLOB handle] from a +** caller-supplied buffer. N bytes of data are copied from the buffer Z +** into the open BLOB, starting at offset iOffset.)^ ** +** ^(On success, sqlite3_blob_write() returns SQLITE_OK. +** Otherwise, an [error code] or an [extended error code] is returned.)^ +** ^Unless SQLITE_MISUSE is returned, this function sets the +** [database connection] error code and message accessible via +** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. +** ** ^If the [BLOB handle] passed as the first argument was not opened for ** writing (the flags parameter to [sqlite3_blob_open()] was zero), ** this function returns [SQLITE_READONLY]. ** -** ^This function may only modify the contents of the BLOB; it is +** This function may only modify the contents of the BLOB; it is ** not possible to increase the size of a BLOB using this API. ** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is written. ^If N is -** less than zero [SQLITE_ERROR] is returned and no data is written. -** The size of the BLOB (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. +** [SQLITE_ERROR] is returned and no data is written. The size of the +** BLOB (and hence the maximum value of N+iOffset) can be determined +** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less +** than zero [SQLITE_ERROR] is returned and no data is written. ** ** ^An attempt to write to an expired [BLOB handle] fails with an ** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred @@ -5848,9 +6045,6 @@ ** have been overwritten by the statement that expired the BLOB handle ** or by other independent statements. ** -** ^(On success, sqlite3_blob_write() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** ** This routine only works on a [BLOB handle] which has been created ** by a prior successful call to [sqlite3_blob_open()] and which has not ** been closed by [sqlite3_blob_close()]. Passing any other pointer in @@ -5903,60 +6097,63 @@ ** ** The SQLite source code contains multiple implementations ** of these mutex routines. An appropriate implementation -** is selected automatically at compile-time. ^(The following +** is selected automatically at compile-time. The following ** implementations are available in the SQLite core: ** ** )^ +** ** -** ^The SQLITE_MUTEX_NOOP implementation is a set of routines +** The SQLITE_MUTEX_NOOP implementation is a set of routines ** that does no real locking and is appropriate for use in -** a single-threaded application. ^The SQLITE_MUTEX_PTHREADS and +** a single-threaded application. The SQLITE_MUTEX_PTHREADS and ** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix ** and Windows. ** -** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor +** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor ** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex ** implementation is included with the library. In this case the ** application must supply a custom mutex implementation using the ** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function ** before calling sqlite3_initialize() or any other public sqlite3_ -** function that calls sqlite3_initialize().)^ +** function that calls sqlite3_initialize(). ** ** ^The sqlite3_mutex_alloc() routine allocates a new -** mutex and returns a pointer to it. ^If it returns NULL -** that means that a mutex could not be allocated. ^SQLite -** will unwind its stack and return an error. ^(The argument -** to sqlite3_mutex_alloc() is one of these integer constants: +** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc() +** routine returns NULL if it is unable to allocate the requested +** mutex. The argument to sqlite3_mutex_alloc() must one of these +** integer constants: ** ** )^ +**
  • SQLITE_MUTEX_STATIC_PMEM +**
  • SQLITE_MUTEX_STATIC_APP1 +**
  • SQLITE_MUTEX_STATIC_APP2 +**
  • SQLITE_MUTEX_STATIC_APP3 +** ** ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) ** cause sqlite3_mutex_alloc() to create ** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE ** is used but not necessarily so when SQLITE_MUTEX_FAST is used. ** The mutex implementation does not need to make a distinction ** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does -** not want to. ^SQLite will only request a recursive mutex in -** cases where it really needs one. ^If a faster non-recursive mutex +** not want to. SQLite will only request a recursive mutex in +** cases where it really needs one. If a faster non-recursive mutex ** implementation is available on the host platform, the mutex subsystem ** might return such a mutex in response to SQLITE_MUTEX_FAST. ** ** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other ** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return -** a pointer to a static preexisting mutex. ^Six static mutexes are +** a pointer to a static preexisting mutex. ^Nine static mutexes are ** used by the current version of SQLite. Future versions of SQLite ** may add additional static mutexes. Static mutexes are for internal ** use by SQLite only. Applications that use SQLite mutexes should @@ -5965,40 +6162,35 @@ ** ** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST ** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc() -** returns a different mutex on every call. ^But for the static +** returns a different mutex on every call. ^For the static ** mutex types, the same mutex is returned on every call that has ** the same type number. ** ** ^The sqlite3_mutex_free() routine deallocates a previously -** allocated dynamic mutex. ^SQLite is careful to deallocate every -** dynamic mutex that it allocates. The dynamic mutexes must not be in -** use when they are deallocated. Attempting to deallocate a static -** mutex results in undefined behavior. ^SQLite never deallocates -** a static mutex. +** allocated dynamic mutex. Attempting to deallocate a static +** mutex results in undefined behavior. ** ** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt ** to enter a mutex. ^If another thread is already within the mutex, ** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return ** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK] ** upon successful entry. ^(Mutexes created using ** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread. -** In such cases the, +** In such cases, the ** mutex must be exited an equal number of times before another thread -** can enter.)^ ^(If the same thread tries to enter any other -** kind of mutex more than once, the behavior is undefined. -** SQLite will never exhibit -** such behavior in its own use of mutexes.)^ +** can enter.)^ If the same thread tries to enter any mutex other +** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined. ** ** ^(Some systems (for example, Windows 95) do not support the operation ** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try() -** will always return SQLITE_BUSY. The SQLite core only ever uses -** sqlite3_mutex_try() as an optimization so this is acceptable behavior.)^ +** will always return SQLITE_BUSY. The SQLite core only ever uses +** sqlite3_mutex_try() as an optimization so this is acceptable +** behavior.)^ ** ** ^The sqlite3_mutex_leave() routine exits a mutex that was -** previously entered by the same thread. ^(The behavior +** previously entered by the same thread. The behavior ** is undefined if the mutex is not currently entered by the -** calling thread or is not currently allocated. SQLite will -** never do either.)^ +** calling thread or is not currently allocated. ** ** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or ** sqlite3_mutex_leave() is a NULL pointer, then all three routines @@ -6019,9 +6211,9 @@ ** used to allocate and use mutexes. ** ** Usually, the default mutex implementations provided by SQLite are -** sufficient, however the user has the option of substituting a custom +** sufficient, however the application has the option of substituting a custom ** implementation for specialized deployments or systems for which SQLite -** does not provide a suitable implementation. In this case, the user +** does not provide a suitable implementation. In this case, the application ** creates and populates an instance of this structure to pass ** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option. ** Additionally, an instance of this structure can be used as an @@ -6062,13 +6254,13 @@ ** (i.e. it is acceptable to provide an implementation that segfaults if ** it is passed a NULL pointer). ** -** The xMutexInit() method must be threadsafe. ^It must be harmless to +** The xMutexInit() method must be threadsafe. It must be harmless to ** invoke xMutexInit() multiple times within the same process and without ** intervening calls to xMutexEnd(). Second and subsequent calls to ** xMutexInit() must be no-ops. ** -** ^xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()] -** and its associates). ^Similarly, xMutexAlloc() must not use SQLite memory +** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()] +** and its associates). Similarly, xMutexAlloc() must not use SQLite memory ** allocation for a static mutex. ^However xMutexAlloc() may use SQLite ** memory allocation for a fast or recursive mutex. ** @@ -6094,29 +6286,29 @@ ** CAPI3REF: Mutex Verification Routines ** ** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines -** are intended for use inside assert() statements. ^The SQLite core +** are intended for use inside assert() statements. The SQLite core ** never uses these routines except inside an assert() and applications -** are advised to follow the lead of the core. ^The SQLite core only +** are advised to follow the lead of the core. The SQLite core only ** provides implementations for these routines when it is compiled -** with the SQLITE_DEBUG flag. ^External mutex implementations +** with the SQLITE_DEBUG flag. External mutex implementations ** are only required to provide these routines if SQLITE_DEBUG is ** defined and if NDEBUG is not defined. ** -** ^These routines should return true if the mutex in their argument +** These routines should return true if the mutex in their argument ** is held or not held, respectively, by the calling thread. ** -** ^The implementation is not required to provide versions of these +** The implementation is not required to provide versions of these ** routines that actually work. If the implementation does not provide working ** versions of these routines, it should at least provide stubs that always ** return true so that one does not get spurious assertion failures. ** -** ^If the argument to sqlite3_mutex_held() is a NULL pointer then +** If the argument to sqlite3_mutex_held() is a NULL pointer then ** the routine should return 1. This seems counter-intuitive since ** clearly the mutex cannot be held if it does not exist. But ** the reason the mutex does not exist is because the build is not ** using mutexes. And we do not want the assert() containing the ** call to sqlite3_mutex_held() to fail, so a non-zero return is -** the appropriate thing to do. ^The sqlite3_mutex_notheld() +** the appropriate thing to do. The sqlite3_mutex_notheld() ** interface should also return 1 when given a NULL pointer. */ #ifndef NDEBUG @@ -6144,6 +6336,9 @@ #define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */ #define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */ #define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */ +#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */ +#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */ +#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */ /* ** CAPI3REF: Retrieve the mutex for a database connection @@ -6235,10 +6430,13 @@ #define SQLITE_TESTCTRL_ISKEYWORD 16 #define SQLITE_TESTCTRL_SCRATCHMALLOC 17 #define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 -#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 +#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ #define SQLITE_TESTCTRL_NEVER_CORRUPT 20 #define SQLITE_TESTCTRL_VDBE_COVERAGE 21 -#define SQLITE_TESTCTRL_LAST 21 +#define SQLITE_TESTCTRL_BYTEORDER 22 +#define SQLITE_TESTCTRL_ISINIT 23 +#define SQLITE_TESTCTRL_SORTER_MMAP 24 +#define SQLITE_TESTCTRL_LAST 24 /* ** CAPI3REF: SQLite Runtime Status @@ -6429,12 +6627,12 @@ ** the current value is always zero.)^ ** ** [[SQLITE_DBSTATUS_CACHE_USED]] ^(
    SQLITE_DBSTATUS_CACHE_USED
    -**
    This parameter returns the approximate number of of bytes of heap +**
    This parameter returns the approximate number of bytes of heap ** memory used by all pager caches associated with the database connection.)^ ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0. ** ** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(
    SQLITE_DBSTATUS_SCHEMA_USED
    -**
    This parameter returns the approximate number of of bytes of heap +**
    This parameter returns the approximate number of bytes of heap ** memory used to store the schema for all databases associated ** with the connection - main, temp, and any [ATTACH]-ed databases.)^ ** ^The full amount of memory used by the schemas is reported, even if the @@ -6443,7 +6641,7 @@ ** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0. ** ** [[SQLITE_DBSTATUS_STMT_USED]] ^(
    SQLITE_DBSTATUS_STMT_USED
    -**
    This parameter returns the approximate number of of bytes of heap +**
    This parameter returns the approximate number of bytes of heap ** and lookaside memory used by all prepared statements associated with ** the database connection.)^ ** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0. @@ -6843,6 +7041,10 @@ ** must be different or else sqlite3_backup_init(D,N,S,M) will fail with ** an error. ** +** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if +** there is already a read or read-write transaction open on the +** destination database. +** ** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is ** returned and an error code and error message are stored in the ** destination [database connection] D. @@ -7166,12 +7368,10 @@ ** CAPI3REF: Write-Ahead Log Commit Hook ** ** ^The [sqlite3_wal_hook()] function is used to register a callback that -** will be invoked each time a database connection commits data to a -** [write-ahead log] (i.e. whenever a transaction is committed in -** [journal_mode | journal_mode=WAL mode]). +** is invoked each time data is committed to a database in wal mode. ** -** ^The callback is invoked by SQLite after the commit has taken place and -** the associated write-lock on the database released, so the implementation +** ^(The callback is invoked by SQLite after the commit has taken place and +** the associated write-lock on the database released)^, so the implementation ** may read, write or [checkpoint] the database as required. ** ** ^The first parameter passed to the callback function when it is invoked @@ -7222,6 +7422,9 @@ ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface ** from SQL. ** +** ^Checkpoints initiated by this mechanism are +** [sqlite3_wal_checkpoint_v2|PASSIVE]. +** ** ^Every new [database connection] defaults to having the auto-checkpoint ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT] ** pages. The use of this interface @@ -7233,90 +7436,114 @@ /* ** CAPI3REF: Checkpoint a database ** -** ^The [sqlite3_wal_checkpoint(D,X)] interface causes database named X -** on [database connection] D to be [checkpointed]. ^If X is NULL or an -** empty string, then a checkpoint is run on all databases of -** connection D. ^If the database connection D is not in -** [WAL | write-ahead log mode] then this interface is a harmless no-op. +** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to +** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^ ** -** ^The [wal_checkpoint pragma] can be used to invoke this interface -** from SQL. ^The [sqlite3_wal_autocheckpoint()] interface and the -** [wal_autocheckpoint pragma] can be used to cause this interface to be -** run whenever the WAL reaches a certain size threshold. +** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the +** [write-ahead log] for database X on [database connection] D to be +** transferred into the database file and for the write-ahead log to +** be reset. See the [checkpointing] documentation for addition +** information. ** -** See also: [sqlite3_wal_checkpoint_v2()] +** This interface used to be the only way to cause a checkpoint to +** occur. But then the newer and more powerful [sqlite3_wal_checkpoint_v2()] +** interface was added. This interface is retained for backwards +** compatibility and as a convenience for applications that need to manually +** start a callback but which do not need the full power (and corresponding +** complication) of [sqlite3_wal_checkpoint_v2()]. */ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb); /* ** CAPI3REF: Checkpoint a database ** -** Run a checkpoint operation on WAL database zDb attached to database -** handle db. The specific operation is determined by the value of the -** eMode parameter: +** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint +** operation on database X of [database connection] D in mode M. Status +** information is written back into integers pointed to by L and C.)^ +** ^(The M parameter must be a valid [checkpoint mode]:)^ ** **
    **
    SQLITE_CHECKPOINT_PASSIVE
    -** Checkpoint as many frames as possible without waiting for any database -** readers or writers to finish. Sync the db file if all frames in the log -** are checkpointed. This mode is the same as calling -** sqlite3_wal_checkpoint(). The busy-handler callback is never invoked. +** ^Checkpoint as many frames as possible without waiting for any database +** readers or writers to finish, then sync the database file if all frames +** in the log were checkpointed. ^The [busy-handler callback] +** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode. +** ^On the other hand, passive mode might leave the checkpoint unfinished +** if there are concurrent readers or writers. ** **
    SQLITE_CHECKPOINT_FULL
    -** This mode blocks (calls the busy-handler callback) until there is no +** ^This mode blocks (it invokes the +** [sqlite3_busy_handler|busy-handler callback]) until there is no ** database writer and all readers are reading from the most recent database -** snapshot. It then checkpoints all frames in the log file and syncs the -** database file. This call blocks database writers while it is running, -** but not database readers. +** snapshot. ^It then checkpoints all frames in the log file and syncs the +** database file. ^This mode blocks new database writers while it is pending, +** but new database readers are allowed to continue unimpeded. ** **
    SQLITE_CHECKPOINT_RESTART
    -** This mode works the same way as SQLITE_CHECKPOINT_FULL, except after -** checkpointing the log file it blocks (calls the busy-handler callback) -** until all readers are reading from the database file only. This ensures -** that the next client to write to the database file restarts the log file -** from the beginning. This call blocks database writers while it is running, -** but not database readers. +** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition +** that after checkpointing the log file it blocks (calls the +** [busy-handler callback]) +** until all readers are reading from the database file only. ^This ensures +** that the next writer will restart the log file from the beginning. +** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new +** database writer attempts while it is pending, but does not impede readers. +** +**
    SQLITE_CHECKPOINT_TRUNCATE
    +** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the +** addition that it also truncates the log file to zero bytes just prior +** to a successful return. **
    ** -** If pnLog is not NULL, then *pnLog is set to the total number of frames in -** the log file before returning. If pnCkpt is not NULL, then *pnCkpt is set to -** the total number of checkpointed frames (including any that were already -** checkpointed when this function is called). *pnLog and *pnCkpt may be -** populated even if sqlite3_wal_checkpoint_v2() returns other than SQLITE_OK. -** If no values are available because of an error, they are both set to -1 -** before returning to communicate this to the caller. +** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in +** the log file or to -1 if the checkpoint could not run because +** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not +** NULL,then *pnCkpt is set to the total number of checkpointed frames in the +** log file (including any that were already checkpointed before the function +** was called) or to -1 if the checkpoint could not run due to an error or +** because the database is not in WAL mode. ^Note that upon successful +** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been +** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero. ** -** All calls obtain an exclusive "checkpoint" lock on the database file. If +** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If ** any other process is running a checkpoint operation at the same time, the -** lock cannot be obtained and SQLITE_BUSY is returned. Even if there is a +** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a ** busy-handler configured, it will not be invoked in this case. ** -** The SQLITE_CHECKPOINT_FULL and RESTART modes also obtain the exclusive -** "writer" lock on the database file. If the writer lock cannot be obtained -** immediately, and a busy-handler is configured, it is invoked and the writer -** lock retried until either the busy-handler returns 0 or the lock is -** successfully obtained. The busy-handler is also invoked while waiting for -** database readers as described above. If the busy-handler returns 0 before +** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the +** exclusive "writer" lock on the database file. ^If the writer lock cannot be +** obtained immediately, and a busy-handler is configured, it is invoked and +** the writer lock retried until either the busy-handler returns 0 or the lock +** is successfully obtained. ^The busy-handler is also invoked while waiting for +** database readers as described above. ^If the busy-handler returns 0 before ** the writer lock is obtained or while waiting for database readers, the ** checkpoint operation proceeds from that point in the same way as ** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible -** without blocking any further. SQLITE_BUSY is returned in this case. +** without blocking any further. ^SQLITE_BUSY is returned in this case. ** -** If parameter zDb is NULL or points to a zero length string, then the -** specified operation is attempted on all WAL databases. In this case the -** values written to output parameters *pnLog and *pnCkpt are undefined. If +** ^If parameter zDb is NULL or points to a zero length string, then the +** specified operation is attempted on all WAL databases [attached] to +** [database connection] db. In this case the +** values written to output parameters *pnLog and *pnCkpt are undefined. ^If ** an SQLITE_BUSY error is encountered when processing one or more of the ** attached WAL databases, the operation is still attempted on any remaining -** attached databases and SQLITE_BUSY is returned to the caller. If any other +** attached databases and SQLITE_BUSY is returned at the end. ^If any other ** error occurs while processing an attached database, processing is abandoned -** and the error code returned to the caller immediately. If no error +** and the error code is returned to the caller immediately. ^If no error ** (SQLITE_BUSY or otherwise) is encountered while processing the attached ** databases, SQLITE_OK is returned. ** -** If database zDb is the name of an attached database that is not in WAL -** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. If +** ^If database zDb is the name of an attached database that is not in WAL +** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. ^If ** zDb is not NULL (or a zero length string) and is not the name of any ** attached database, SQLITE_ERROR is returned to the caller. +** +** ^Unless it returns SQLITE_MISUSE, +** the sqlite3_wal_checkpoint_v2() interface +** sets the error information that is queried by +** [sqlite3_errcode()] and [sqlite3_errmsg()]. +** +** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface +** from SQL. */ SQLITE_API int sqlite3_wal_checkpoint_v2( sqlite3 *db, /* Database handle */ @@ -7327,16 +7554,18 @@ ); /* -** CAPI3REF: Checkpoint operation parameters +** CAPI3REF: Checkpoint Mode Values +** KEYWORDS: {checkpoint mode} ** -** These constants can be used as the 3rd parameter to -** [sqlite3_wal_checkpoint_v2()]. See the [sqlite3_wal_checkpoint_v2()] -** documentation for additional information about the meaning and use of -** each of these values. +** These constants define all valid values for the "checkpoint mode" passed +** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface. +** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the +** meaning of each of these checkpoint modes. */ -#define SQLITE_CHECKPOINT_PASSIVE 0 -#define SQLITE_CHECKPOINT_FULL 1 -#define SQLITE_CHECKPOINT_RESTART 2 +#define SQLITE_CHECKPOINT_PASSIVE 0 /* Do as much as possible w/o blocking */ +#define SQLITE_CHECKPOINT_FULL 1 /* Wait for writers, then checkpoint */ +#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for for readers */ +#define SQLITE_CHECKPOINT_TRUNCATE 3 /* Like RESTART but also truncate WAL */ /* ** CAPI3REF: Virtual Table Interface Configuration @@ -7409,6 +7638,7 @@ /* ** CAPI3REF: Conflict resolution modes +** KEYWORDS: {conflict resolution mode} ** ** These constants are returned by [sqlite3_vtab_on_conflict()] to ** inform a [virtual table] implementation what the [ON CONFLICT] mode @@ -7424,9 +7654,109 @@ /* #define SQLITE_ABORT 4 // Also an error code */ #define SQLITE_REPLACE 5 +/* +** CAPI3REF: Prepared Statement Scan Status Opcodes +** KEYWORDS: {scanstatus options} +** +** The following constants can be used for the T parameter to the +** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a +** different metric for sqlite3_stmt_scanstatus() to return. +** +** When the value returned to V is a string, space to hold that string is +** managed by the prepared statement S and will be automatically freed when +** S is finalized. +** +**
    +** [[SQLITE_SCANSTAT_NLOOP]]
    SQLITE_SCANSTAT_NLOOP
    +**
    ^The [sqlite3_int64] variable pointed to by the T parameter will be +** set to the total number of times that the X-th loop has run.
    +** +** [[SQLITE_SCANSTAT_NVISIT]]
    SQLITE_SCANSTAT_NVISIT
    +**
    ^The [sqlite3_int64] variable pointed to by the T parameter will be set +** to the total number of rows examined by all iterations of the X-th loop.
    +** +** [[SQLITE_SCANSTAT_EST]]
    SQLITE_SCANSTAT_EST
    +**
    ^The "double" variable pointed to by the T parameter will be set to the +** query planner's estimate for the average number of rows output from each +** iteration of the X-th loop. If the query planner's estimates was accurate, +** then this value will approximate the quotient NVISIT/NLOOP and the +** product of this value for all prior loops with the same SELECTID will +** be the NLOOP value for the current loop. +** +** [[SQLITE_SCANSTAT_NAME]]
    SQLITE_SCANSTAT_NAME
    +**
    ^The "const char *" variable pointed to by the T parameter will be set +** to a zero-terminated UTF-8 string containing the name of the index or table +** used for the X-th loop. +** +** [[SQLITE_SCANSTAT_EXPLAIN]]
    SQLITE_SCANSTAT_EXPLAIN
    +**
    ^The "const char *" variable pointed to by the T parameter will be set +** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN] +** description for the X-th loop. +** +** [[SQLITE_SCANSTAT_SELECTID]]
    SQLITE_SCANSTAT_SELECT
    +**
    ^The "int" variable pointed to by the T parameter will be set to the +** "select-id" for the X-th loop. The select-id identifies which query or +** subquery the loop is part of. The main query has a select-id of zero. +** The select-id is the same value as is output in the first column +** of an [EXPLAIN QUERY PLAN] query. +**
    +*/ +#define SQLITE_SCANSTAT_NLOOP 0 +#define SQLITE_SCANSTAT_NVISIT 1 +#define SQLITE_SCANSTAT_EST 2 +#define SQLITE_SCANSTAT_NAME 3 +#define SQLITE_SCANSTAT_EXPLAIN 4 +#define SQLITE_SCANSTAT_SELECTID 5 +/* +** CAPI3REF: Prepared Statement Scan Status +** +** This interface returns information about the predicted and measured +** performance for pStmt. Advanced applications can use this +** interface to compare the predicted and the measured performance and +** issue warnings and/or rerun [ANALYZE] if discrepancies are found. +** +** Since this interface is expected to be rarely used, it is only +** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS] +** compile-time option. +** +** The "iScanStatusOp" parameter determines which status information to return. +** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior +** of this interface is undefined. +** ^The requested measurement is written into a variable pointed to by +** the "pOut" parameter. +** Parameter "idx" identifies the specific loop to retrieve statistics for. +** Loops are numbered starting from zero. ^If idx is out of range - less than +** zero or greater than or equal to the total number of loops used to implement +** the statement - a non-zero value is returned and the variable that pOut +** points to is unchanged. +** +** ^Statistics might not be available for all loops in all statements. ^In cases +** where there exist loops with no available statistics, this function behaves +** as if the loop did not exist - it returns non-zero and leave the variable +** that pOut points to unchanged. +** +** See also: [sqlite3_stmt_scanstatus_reset()] +*/ +SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_stmt_scanstatus( + sqlite3_stmt *pStmt, /* Prepared statement for which info desired */ + int idx, /* Index of loop to report on */ + int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */ + void *pOut /* Result written here */ +); /* +** CAPI3REF: Zero Scan-Status Counters +** +** ^Zero all [sqlite3_stmt_scanstatus()] related event counters. +** +** This API is only available if the library is built with pre-processor +** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined. +*/ +SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*); + + +/* ** Undo the hack that converts floating point types to integer for ** builds on processors without floating point support. */ @@ -7461,7 +7791,17 @@ #endif typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry; +typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info; +/* The double-precision datatype used by RTree depends on the +** SQLITE_RTREE_INT_ONLY compile-time option. +*/ +#ifdef SQLITE_RTREE_INT_ONLY + typedef sqlite3_int64 sqlite3_rtree_dbl; +#else + typedef double sqlite3_rtree_dbl; +#endif + /* ** Register a geometry callback named zGeom that can be used as part of an ** R-Tree geometry query as follows: @@ -7471,11 +7811,7 @@ SQLITE_API int sqlite3_rtree_geometry_callback( sqlite3 *db, const char *zGeom, -#ifdef SQLITE_RTREE_INT_ONLY - int (*xGeom)(sqlite3_rtree_geometry*, int n, sqlite3_int64 *a, int *pRes), -#else - int (*xGeom)(sqlite3_rtree_geometry*, int n, double *a, int *pRes), -#endif + int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*), void *pContext ); @@ -7487,12 +7823,61 @@ struct sqlite3_rtree_geometry { void *pContext; /* Copy of pContext passed to s_r_g_c() */ int nParam; /* Size of array aParam[] */ - double *aParam; /* Parameters passed to SQL geom function */ + sqlite3_rtree_dbl *aParam; /* Parameters passed to SQL geom function */ void *pUser; /* Callback implementation user data */ void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */ }; +/* +** Register a 2nd-generation geometry callback named zScore that can be +** used as part of an R-Tree geometry query as follows: +** +** SELECT ... FROM WHERE MATCH $zQueryFunc(... params ...) +*/ +SQLITE_API int sqlite3_rtree_query_callback( + sqlite3 *db, + const char *zQueryFunc, + int (*xQueryFunc)(sqlite3_rtree_query_info*), + void *pContext, + void (*xDestructor)(void*) +); + +/* +** A pointer to a structure of the following type is passed as the +** argument to scored geometry callback registered using +** sqlite3_rtree_query_callback(). +** +** Note that the first 5 fields of this structure are identical to +** sqlite3_rtree_geometry. This structure is a subclass of +** sqlite3_rtree_geometry. +*/ +struct sqlite3_rtree_query_info { + void *pContext; /* pContext from when function registered */ + int nParam; /* Number of function parameters */ + sqlite3_rtree_dbl *aParam; /* value of function parameters */ + void *pUser; /* callback can use this, if desired */ + void (*xDelUser)(void*); /* function to free pUser */ + sqlite3_rtree_dbl *aCoord; /* Coordinates of node or entry to check */ + unsigned int *anQueue; /* Number of pending entries in the queue */ + int nCoord; /* Number of coordinates */ + int iLevel; /* Level of current node or entry */ + int mxLevel; /* The largest iLevel value in the tree */ + sqlite3_int64 iRowid; /* Rowid for current entry */ + sqlite3_rtree_dbl rParentScore; /* Score of parent node */ + int eParentWithin; /* Visibility of parent node */ + int eWithin; /* OUT: Visiblity */ + sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ +}; + +/* +** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin. +*/ +#define NOT_WITHIN 0 /* Object completely outside of query region */ +#define PARTLY_WITHIN 1 /* Object partially overlaps query region */ +#define FULLY_WITHIN 2 /* Object fully contained within query region */ + + #if 0 } /* end of the 'extern "C"' block */ #endif @@ -7734,15 +8119,6 @@ #pragma warn -spa /* Suspicious pointer arithmetic */ #endif -/* Needed for various definitions... */ -#ifndef _GNU_SOURCE -# define _GNU_SOURCE -#endif - -#if defined(__OpenBSD__) && !defined(_BSD_SOURCE) -# define _BSD_SOURCE -#endif - /* ** Include standard header files as necessary */ @@ -7784,6 +8160,18 @@ #endif /* +** A macro to hint to the compiler that a function should not be +** inlined. +*/ +#if defined(__GNUC__) +# define SQLITE_NOINLINE __attribute__((noinline)) +#elif defined(_MSC_VER) && _MSC_VER>=1310 +# define SQLITE_NOINLINE __declspec(noinline) +#else +# define SQLITE_NOINLINE +#endif + +/* ** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. ** 0 means mutexes are permanently disable and the library is never ** threadsafe. 1 means the library is serialized which is the highest @@ -7811,10 +8199,9 @@ #endif /* -** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1. -** It determines whether or not the features related to -** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can -** be overridden at runtime using the sqlite3_config() API. +** EVIDENCE-OF: R-25715-37072 Memory allocation statistics are enabled by +** default unless SQLite is compiled with SQLITE_DEFAULT_MEMSTATUS=0 in +** which case memory allocation statistics are disabled by default. */ #if !defined(SQLITE_DEFAULT_MEMSTATUS) # define SQLITE_DEFAULT_MEMSTATUS 1 @@ -7969,7 +8356,7 @@ #endif /* -** Return true (non-zero) if the input is a integer that is too large +** Return true (non-zero) if the input is an integer that is too large ** to fit in 32-bits. This macro is used inside of various testcase() ** macros to verify that we have tested SQLite for large-file support. */ @@ -8048,15 +8435,15 @@ struct HashElem { HashElem *next, *prev; /* Next and previous elements in the table */ void *data; /* Data associated with this element */ - const char *pKey; int nKey; /* Key associated with this element */ + const char *pKey; /* Key associated with this element */ }; /* ** Access routines. To delete, insert a NULL pointer. */ SQLITE_PRIVATE void sqlite3HashInit(Hash*); -SQLITE_PRIVATE void *sqlite3HashInsert(Hash*, const char *pKey, int nKey, void *pData); -SQLITE_PRIVATE void *sqlite3HashFind(const Hash*, const char *pKey, int nKey); +SQLITE_PRIVATE void *sqlite3HashInsert(Hash*, const char *pKey, void *pData); +SQLITE_PRIVATE void *sqlite3HashFind(const Hash*, const char *pKey); SQLITE_PRIVATE void sqlite3HashClear(Hash*); /* @@ -8316,6 +8703,27 @@ #endif /* +** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if +** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it +** to zero. +*/ +#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0 +# undef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS 0 +#endif +#ifndef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS 8 +#endif +#ifndef SQLITE_DEFAULT_WORKER_THREADS +# define SQLITE_DEFAULT_WORKER_THREADS 0 +#endif +#if SQLITE_DEFAULT_WORKER_THREADS>SQLITE_MAX_WORKER_THREADS +# undef SQLITE_MAX_WORKER_THREADS +# define SQLITE_MAX_WORKER_THREADS SQLITE_DEFAULT_WORKER_THREADS +#endif + + +/* ** GCC does not define the offsetof() macro so we'll have to do it ** ourselves. */ @@ -8330,6 +8738,11 @@ #define MAX(A,B) ((A)>(B)?(A):(B)) /* +** Swap two objects of type TYPE. +*/ +#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;} + +/* ** Check to see if this machine uses EBCDIC. (Yes, believe it or ** not, there are still machines out there that use EBCDIC.) */ @@ -8418,10 +8831,10 @@ ** gives a possible range of values of approximately 1.0e986 to 1e-986. ** But the allowed values are "grainy". Not every value is representable. ** For example, quantities 16 and 17 are both represented by a LogEst -** of 40. However, since LogEst quantatites are suppose to be estimates, +** of 40. However, since LogEst quantities are suppose to be estimates, ** not exact values, this imprecision is not a problem. ** -** "LogEst" is short for "Logarithimic Estimate". +** "LogEst" is short for "Logarithmic Estimate". ** ** Examples: ** 1 -> 0 20 -> 43 10000 -> 132 @@ -8439,22 +8852,39 @@ /* ** Macros to determine whether the machine is big or little endian, -** evaluated at runtime. +** and whether or not that determination is run-time or compile-time. +** +** For best performance, an attempt is made to guess at the byte-order +** using C-preprocessor macros. If that is unsuccessful, or if +** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined +** at run-time. */ #ifdef SQLITE_AMALGAMATION SQLITE_PRIVATE const int sqlite3one = 1; #else SQLITE_PRIVATE const int sqlite3one; #endif -#if defined(i386) || defined(__i386__) || defined(_M_IX86)\ - || defined(__x86_64) || defined(__x86_64__) +#if (defined(i386) || defined(__i386__) || defined(_M_IX86) || \ + defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \ + defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \ + defined(__arm__)) && !defined(SQLITE_RUNTIME_BYTEORDER) +# define SQLITE_BYTEORDER 1234 # define SQLITE_BIGENDIAN 0 # define SQLITE_LITTLEENDIAN 1 # define SQLITE_UTF16NATIVE SQLITE_UTF16LE -#else +#endif +#if (defined(sparc) || defined(__ppc__)) \ + && !defined(SQLITE_RUNTIME_BYTEORDER) +# define SQLITE_BYTEORDER 4321 +# define SQLITE_BIGENDIAN 1 +# define SQLITE_LITTLEENDIAN 0 +# define SQLITE_UTF16NATIVE SQLITE_UTF16BE +#endif +#if !defined(SQLITE_BYTEORDER) +# define SQLITE_BYTEORDER 0 /* 0 means "unknown at compile-time" */ # define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) # define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) -# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) +# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) #endif /* @@ -8482,7 +8912,7 @@ ** all alignment restrictions correct. ** ** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the -** underlying malloc() implemention might return us 4-byte aligned +** underlying malloc() implementation might return us 4-byte aligned ** pointers. In that case, only verify 4-byte alignment. */ #ifdef SQLITE_4_BYTE_ALIGNED_MALLOC @@ -8550,6 +8980,16 @@ #endif /* +** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not +** the Select query generator tracing logic is turned on. +*/ +#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE) +# define SELECTTRACE_ENABLED 1 +#else +# define SELECTTRACE_ENABLED 0 +#endif + +/* ** An instance of the following structure is used to store the busy-handler ** callback for a given sqlite handle. ** @@ -8681,12 +9121,14 @@ typedef struct RowSet RowSet; typedef struct Savepoint Savepoint; typedef struct Select Select; +typedef struct SQLiteThread SQLiteThread; typedef struct SelectDest SelectDest; typedef struct SrcList SrcList; typedef struct StrAccum StrAccum; typedef struct Table Table; typedef struct TableLock TableLock; typedef struct Token Token; +typedef struct TreeView TreeView; typedef struct Trigger Trigger; typedef struct TriggerPrg TriggerPrg; typedef struct TriggerStep TriggerStep; @@ -8725,7 +9167,7 @@ /* TODO: This definition is just included so other modules compile. It ** needs to be revisited. */ -#define SQLITE_N_BTREE_META 10 +#define SQLITE_N_BTREE_META 16 /* ** If defined as non-zero, auto-vacuum is enabled by default. Otherwise @@ -8769,7 +9211,9 @@ SQLITE_PRIVATE int sqlite3BtreeClose(Btree*); SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int); -SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64); +#if SQLITE_MAX_MMAP_SIZE>0 +SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64); +#endif SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned); SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*); SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix); @@ -8787,7 +9231,7 @@ SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster); SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*, int); SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*); -SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*,int); +SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*,int,int); SQLITE_PRIVATE int sqlite3BtreeBeginStmt(Btree*,int); SQLITE_PRIVATE int sqlite3BtreeCreateTable(Btree*, int*, int flags); SQLITE_PRIVATE int sqlite3BtreeIsInTrans(Btree*); @@ -8819,7 +9263,8 @@ SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*); SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*); -SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree*, int); +SQLITE_PRIVATE int sqlite3BtreeClearTableOfCursor(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreeTripAllCursors(Btree*, int, int); SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue); SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value); @@ -8837,6 +9282,11 @@ ** For example, the free-page-count field is located at byte offset 36 of ** the database file header. The incr-vacuum-flag field is located at ** byte offset 64 (== 36+4*7). +** +** The BTREE_DATA_VERSION value is not really a value stored in the header. +** It is a read-only number computed by the pager. But we merge it with +** the header value access routines since its access pattern is the same. +** Call it a "virtual meta value". */ #define BTREE_FREE_PAGE_COUNT 0 #define BTREE_SCHEMA_VERSION 1 @@ -8847,6 +9297,7 @@ #define BTREE_USER_VERSION 6 #define BTREE_INCR_VACUUM 7 #define BTREE_APPLICATION_ID 8 +#define BTREE_DATA_VERSION 15 /* A virtual meta-value */ /* ** Values that may be OR'd together to form the second argument of an @@ -8872,7 +9323,8 @@ int bias, int *pRes ); -SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*, int*); +SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*); +SQLITE_PRIVATE int sqlite3BtreeCursorRestore(BtCursor*, int*); SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*); SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey, const void *pData, int nData, @@ -8893,10 +9345,12 @@ SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE void sqlite3BtreeCacheOverflow(BtCursor *); +SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *); SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *); SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion); SQLITE_PRIVATE void sqlite3BtreeCursorHints(BtCursor *, unsigned int mask); +SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *pBt); +SQLITE_PRIVATE int sqlite3HeaderSizeBtree(void); #ifndef NDEBUG SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*); @@ -9136,7 +9590,7 @@ #define OP_Checkpoint 11 #define OP_JournalMode 12 #define OP_Vacuum 13 -#define OP_VFilter 14 /* synopsis: iPlan=r[P3] zPlan='P4' */ +#define OP_VFilter 14 /* synopsis: iplan=r[P3] zplan='P4' */ #define OP_VUpdate 15 /* synopsis: data=r[P3@P2] */ #define OP_Goto 16 #define OP_Gosub 17 @@ -9162,42 +9616,42 @@ #define OP_AddImm 37 /* synopsis: r[P1]=r[P1]+P2 */ #define OP_MustBeInt 38 #define OP_RealAffinity 39 -#define OP_Permutation 40 -#define OP_Compare 41 -#define OP_Jump 42 -#define OP_Once 43 -#define OP_If 44 -#define OP_IfNot 45 -#define OP_Column 46 /* synopsis: r[P3]=PX */ -#define OP_Affinity 47 /* synopsis: affinity(r[P1@P2]) */ -#define OP_MakeRecord 48 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ -#define OP_Count 49 /* synopsis: r[P2]=count() */ -#define OP_ReadCookie 50 -#define OP_SetCookie 51 -#define OP_OpenRead 52 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenWrite 53 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenAutoindex 54 /* synopsis: nColumn=P2 */ -#define OP_OpenEphemeral 55 /* synopsis: nColumn=P2 */ -#define OP_SorterOpen 56 -#define OP_OpenPseudo 57 /* synopsis: P3 columns in r[P2] */ -#define OP_Close 58 -#define OP_SeekLT 59 -#define OP_SeekLE 60 -#define OP_SeekGE 61 -#define OP_SeekGT 62 -#define OP_Seek 63 /* synopsis: intkey=r[P2] */ -#define OP_NoConflict 64 /* synopsis: key=r[P3@P4] */ -#define OP_NotFound 65 /* synopsis: key=r[P3@P4] */ -#define OP_Found 66 /* synopsis: key=r[P3@P4] */ -#define OP_NotExists 67 /* synopsis: intkey=r[P3] */ -#define OP_Sequence 68 /* synopsis: r[P2]=rowid */ -#define OP_NewRowid 69 /* synopsis: r[P2]=rowid */ -#define OP_Insert 70 /* synopsis: intkey=r[P3] data=r[P2] */ +#define OP_Cast 40 /* synopsis: affinity(r[P1]) */ +#define OP_Permutation 41 +#define OP_Compare 42 /* synopsis: r[P1@P3] <-> r[P2@P3] */ +#define OP_Jump 43 +#define OP_Once 44 +#define OP_If 45 +#define OP_IfNot 46 +#define OP_Column 47 /* synopsis: r[P3]=PX */ +#define OP_Affinity 48 /* synopsis: affinity(r[P1@P2]) */ +#define OP_MakeRecord 49 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ +#define OP_Count 50 /* synopsis: r[P2]=count() */ +#define OP_ReadCookie 51 +#define OP_SetCookie 52 +#define OP_ReopenIdx 53 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenRead 54 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenWrite 55 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenAutoindex 56 /* synopsis: nColumn=P2 */ +#define OP_OpenEphemeral 57 /* synopsis: nColumn=P2 */ +#define OP_SorterOpen 58 +#define OP_SequenceTest 59 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */ +#define OP_OpenPseudo 60 /* synopsis: P3 columns in r[P2] */ +#define OP_Close 61 +#define OP_SeekLT 62 /* synopsis: key=r[P3@P4] */ +#define OP_SeekLE 63 /* synopsis: key=r[P3@P4] */ +#define OP_SeekGE 64 /* synopsis: key=r[P3@P4] */ +#define OP_SeekGT 65 /* synopsis: key=r[P3@P4] */ +#define OP_Seek 66 /* synopsis: intkey=r[P2] */ +#define OP_NoConflict 67 /* synopsis: key=r[P3@P4] */ +#define OP_NotFound 68 /* synopsis: key=r[P3@P4] */ +#define OP_Found 69 /* synopsis: key=r[P3@P4] */ +#define OP_NotExists 70 /* synopsis: intkey=r[P3] */ #define OP_Or 71 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ #define OP_And 72 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ -#define OP_InsertInt 73 /* synopsis: intkey=P3 data=r[P2] */ -#define OP_Delete 74 -#define OP_ResetCount 75 +#define OP_Sequence 73 /* synopsis: r[P2]=cursor[P1].ctr++ */ +#define OP_NewRowid 74 /* synopsis: r[P2]=rowid */ +#define OP_Insert 75 /* synopsis: intkey=r[P3] data=r[P2] */ #define OP_IsNull 76 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ #define OP_NotNull 77 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ #define OP_Ne 78 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */ @@ -9206,7 +9660,7 @@ #define OP_Le 81 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */ #define OP_Lt 82 /* same as TK_LT, synopsis: if r[P1]=r[P3] goto P2 */ -#define OP_SorterCompare 84 /* synopsis: if key(P1)!=rtrim(r[P3],P4) goto P2 */ +#define OP_InsertInt 84 /* synopsis: intkey=P3 data=r[P2] */ #define OP_BitAnd 85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ #define OP_BitOr 86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ #define OP_ShiftLeft 87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<0 goto P2 */ +#define OP_ResetCount 98 +#define OP_SorterCompare 99 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ +#define OP_SorterData 100 /* synopsis: r[P2]=data */ +#define OP_RowKey 101 /* synopsis: r[P2]=key */ +#define OP_RowData 102 /* synopsis: r[P2]=data */ +#define OP_Rowid 103 /* synopsis: r[P2]=rowid */ +#define OP_NullRow 104 +#define OP_Last 105 +#define OP_SorterSort 106 +#define OP_Sort 107 +#define OP_Rewind 108 +#define OP_SorterInsert 109 +#define OP_IdxInsert 110 /* synopsis: key=r[P2] */ +#define OP_IdxDelete 111 /* synopsis: key=r[P2@P3] */ +#define OP_IdxRowid 112 /* synopsis: r[P2]=rowid */ +#define OP_IdxLE 113 /* synopsis: key=r[P3@P4] */ +#define OP_IdxGT 114 /* synopsis: key=r[P3@P4] */ +#define OP_IdxLT 115 /* synopsis: key=r[P3@P4] */ +#define OP_IdxGE 116 /* synopsis: key=r[P3@P4] */ +#define OP_Destroy 117 +#define OP_Clear 118 +#define OP_ResetSorter 119 +#define OP_CreateIndex 120 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_CreateTable 121 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_ParseSchema 122 +#define OP_LoadAnalysis 123 +#define OP_DropTable 124 +#define OP_DropIndex 125 +#define OP_DropTrigger 126 +#define OP_IntegrityCk 127 +#define OP_RowSetAdd 128 /* synopsis: rowset(P1)=r[P2] */ +#define OP_RowSetRead 129 /* synopsis: r[P3]=rowset(P1) */ +#define OP_RowSetTest 130 /* synopsis: if r[P3] in rowset(P1) goto P2 */ +#define OP_Program 131 +#define OP_Param 132 #define OP_Real 133 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ -#define OP_IfNeg 134 /* synopsis: if r[P1]<0 goto P2 */ -#define OP_IfZero 135 /* synopsis: r[P1]+=P3, if r[P1]==0 goto P2 */ -#define OP_AggFinal 136 /* synopsis: accum=r[P1] N=P2 */ -#define OP_IncrVacuum 137 -#define OP_Expire 138 -#define OP_TableLock 139 /* synopsis: iDb=P1 root=P2 write=P3 */ -#define OP_VBegin 140 -#define OP_VCreate 141 -#define OP_VDestroy 142 -#define OP_ToText 143 /* same as TK_TO_TEXT */ -#define OP_ToBlob 144 /* same as TK_TO_BLOB */ -#define OP_ToNumeric 145 /* same as TK_TO_NUMERIC */ -#define OP_ToInt 146 /* same as TK_TO_INT */ -#define OP_ToReal 147 /* same as TK_TO_REAL */ -#define OP_VOpen 148 -#define OP_VColumn 149 /* synopsis: r[P3]=vcolumn(P2) */ -#define OP_VNext 150 -#define OP_VRename 151 -#define OP_Pagecount 152 -#define OP_MaxPgcnt 153 -#define OP_Init 154 /* synopsis: Start at P2 */ -#define OP_Noop 155 -#define OP_Explain 156 +#define OP_FkCounter 134 /* synopsis: fkctr[P1]+=P2 */ +#define OP_FkIfZero 135 /* synopsis: if fkctr[P1]==0 goto P2 */ +#define OP_MemMax 136 /* synopsis: r[P1]=max(r[P1],r[P2]) */ +#define OP_IfPos 137 /* synopsis: if r[P1]>0 goto P2 */ +#define OP_IfNeg 138 /* synopsis: r[P1]+=P3, if r[P1]<0 goto P2 */ +#define OP_IfZero 139 /* synopsis: r[P1]+=P3, if r[P1]==0 goto P2 */ +#define OP_AggFinal 140 /* synopsis: accum=r[P1] N=P2 */ +#define OP_IncrVacuum 141 +#define OP_Expire 142 +#define OP_TableLock 143 /* synopsis: iDb=P1 root=P2 write=P3 */ +#define OP_VBegin 144 +#define OP_VCreate 145 +#define OP_VDestroy 146 +#define OP_VOpen 147 +#define OP_VColumn 148 /* synopsis: r[P3]=vcolumn(P2) */ +#define OP_VNext 149 +#define OP_VRename 150 +#define OP_Pagecount 151 +#define OP_MaxPgcnt 152 +#define OP_Init 153 /* synopsis: Start at P2 */ +#define OP_Noop 154 +#define OP_Explain 155 /* Properties such as "out2" or "jump" that are specified in @@ -9298,21 +9751,21 @@ /* 16 */ 0x01, 0x01, 0x04, 0x24, 0x01, 0x04, 0x05, 0x10,\ /* 24 */ 0x00, 0x02, 0x02, 0x02, 0x02, 0x00, 0x02, 0x02,\ /* 32 */ 0x00, 0x00, 0x20, 0x00, 0x00, 0x04, 0x05, 0x04,\ -/* 40 */ 0x00, 0x00, 0x01, 0x01, 0x05, 0x05, 0x00, 0x00,\ -/* 48 */ 0x00, 0x02, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00,\ -/* 56 */ 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x08,\ -/* 64 */ 0x11, 0x11, 0x11, 0x11, 0x02, 0x02, 0x00, 0x4c,\ -/* 72 */ 0x4c, 0x00, 0x00, 0x00, 0x05, 0x05, 0x15, 0x15,\ +/* 40 */ 0x04, 0x00, 0x00, 0x01, 0x01, 0x05, 0x05, 0x00,\ +/* 48 */ 0x00, 0x00, 0x02, 0x02, 0x10, 0x00, 0x00, 0x00,\ +/* 56 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x11,\ +/* 64 */ 0x11, 0x11, 0x08, 0x11, 0x11, 0x11, 0x11, 0x4c,\ +/* 72 */ 0x4c, 0x02, 0x02, 0x00, 0x05, 0x05, 0x15, 0x15,\ /* 80 */ 0x15, 0x15, 0x15, 0x15, 0x00, 0x4c, 0x4c, 0x4c,\ /* 88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x00,\ -/* 96 */ 0x24, 0x02, 0x00, 0x00, 0x02, 0x00, 0x01, 0x01,\ -/* 104 */ 0x01, 0x01, 0x08, 0x08, 0x00, 0x02, 0x01, 0x01,\ -/* 112 */ 0x01, 0x01, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00,\ -/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x0c, 0x45, 0x15, 0x01,\ -/* 128 */ 0x02, 0x00, 0x01, 0x08, 0x05, 0x02, 0x05, 0x05,\ -/* 136 */ 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,\ -/* 144 */ 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x01, 0x00,\ -/* 152 */ 0x02, 0x02, 0x01, 0x00, 0x00,} +/* 96 */ 0x24, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,\ +/* 104 */ 0x00, 0x01, 0x01, 0x01, 0x01, 0x08, 0x08, 0x00,\ +/* 112 */ 0x02, 0x01, 0x01, 0x01, 0x01, 0x02, 0x00, 0x00,\ +/* 120 */ 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 128 */ 0x0c, 0x45, 0x15, 0x01, 0x02, 0x02, 0x00, 0x01,\ +/* 136 */ 0x08, 0x05, 0x05, 0x05, 0x00, 0x01, 0x00, 0x00,\ +/* 144 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x02,\ +/* 152 */ 0x02, 0x01, 0x00, 0x00,} /************** End of opcodes.h *********************************************/ /************** Continuing where we left off in vdbe.h ***********************/ @@ -9367,12 +9820,13 @@ #ifndef SQLITE_OMIT_TRACE SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*); #endif +SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*); SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*); -SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,const UnpackedRecord*,int); +SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **); -typedef int (*RecordCompare)(int,const void*,const UnpackedRecord*,int); +typedef int (*RecordCompare)(int,const void*,UnpackedRecord*); SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*); #ifndef SQLITE_OMIT_TRIGGER @@ -9439,8 +9893,14 @@ # define VDBE_OFFSET_LINENO(x) 0 #endif +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS +SQLITE_PRIVATE void sqlite3VdbeScanStatus(Vdbe*, int, int, int, LogEst, const char*); +#else +# define sqlite3VdbeScanStatus(a,b,c,d,e) #endif +#endif + /************** End of vdbe.h ************************************************/ /************** Continuing where we left off in sqliteInt.h ******************/ /************** Include pager.h in the middle of sqliteInt.h *****************/ @@ -9619,6 +10079,7 @@ /* Functions used to query pager state and configuration. */ SQLITE_PRIVATE u8 sqlite3PagerIsreadonly(Pager*); +SQLITE_PRIVATE u32 sqlite3PagerDataVersion(Pager*); SQLITE_PRIVATE int sqlite3PagerRefcount(Pager*); SQLITE_PRIVATE int sqlite3PagerMemUsed(Pager*); SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*, int); @@ -9635,6 +10096,8 @@ /* Functions used to truncate the database file. */ SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno); +SQLITE_PRIVATE void sqlite3PagerRekey(DbPage*, Pgno, u16); + #if defined(SQLITE_HAS_CODEC) && !defined(SQLITE_OMIT_WAL) SQLITE_PRIVATE void *sqlite3PagerCodec(DbPage *); #endif @@ -9730,7 +10193,7 @@ ** Under memory stress, invoke xStress to try to make pages clean. ** Only clean and unpinned pages can be reclaimed. */ -SQLITE_PRIVATE void sqlite3PcacheOpen( +SQLITE_PRIVATE int sqlite3PcacheOpen( int szPage, /* Size of every page */ int szExtra, /* Extra space associated with each page */ int bPurgeable, /* True if pages are on backing store */ @@ -9740,7 +10203,7 @@ ); /* Modify the page-size after the cache has been created. */ -SQLITE_PRIVATE void sqlite3PcacheSetPageSize(PCache *, int); +SQLITE_PRIVATE int sqlite3PcacheSetPageSize(PCache *, int); /* Return the size in bytes of a PCache object. Used to preallocate ** storage space. @@ -9750,7 +10213,9 @@ /* One release per successful fetch. Page is pinned until released. ** Reference counted. */ -SQLITE_PRIVATE int sqlite3PcacheFetch(PCache*, Pgno, int createFlag, PgHdr**); +SQLITE_PRIVATE sqlite3_pcache_page *sqlite3PcacheFetch(PCache*, Pgno, int createFlag); +SQLITE_PRIVATE int sqlite3PcacheFetchStress(PCache*, Pgno, sqlite3_pcache_page**); +SQLITE_PRIVATE PgHdr *sqlite3PcacheFetchFinish(PCache*, Pgno, sqlite3_pcache_page *pPage); SQLITE_PRIVATE void sqlite3PcacheRelease(PgHdr*); SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr*); /* Remove page from cache */ @@ -9820,6 +10285,10 @@ SQLITE_PRIVATE void sqlite3PCacheSetDefault(void); +/* Return the header size */ +SQLITE_PRIVATE int sqlite3HeaderSizePcache(void); +SQLITE_PRIVATE int sqlite3HeaderSizePcache1(void); + #endif /* _PCACHE_H_ */ /************** End of pcache.h **********************************************/ @@ -9850,84 +10319,72 @@ #define _SQLITE_OS_H_ /* -** Figure out if we are dealing with Unix, Windows, or some other -** operating system. After the following block of preprocess macros, -** all of SQLITE_OS_UNIX, SQLITE_OS_WIN, and SQLITE_OS_OTHER -** will defined to either 1 or 0. One of the four will be 1. The other -** three will be 0. +** Attempt to automatically detect the operating system and setup the +** necessary pre-processor macros for it. */ -#if defined(SQLITE_OS_OTHER) -# if SQLITE_OS_OTHER==1 -# undef SQLITE_OS_UNIX -# define SQLITE_OS_UNIX 0 -# undef SQLITE_OS_WIN -# define SQLITE_OS_WIN 0 -# else -# undef SQLITE_OS_OTHER -# endif -#endif -#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER) -# define SQLITE_OS_OTHER 0 -# ifndef SQLITE_OS_WIN -# if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || defined(__MINGW32__) || defined(__BORLANDC__) -# define SQLITE_OS_WIN 1 -# define SQLITE_OS_UNIX 0 -# else -# define SQLITE_OS_WIN 0 -# define SQLITE_OS_UNIX 1 -# endif -# else -# define SQLITE_OS_UNIX 0 -# endif -#else -# ifndef SQLITE_OS_WIN -# define SQLITE_OS_WIN 0 -# endif -#endif - -#if SQLITE_OS_WIN -# include -#endif - +/************** Include os_setup.h in the middle of os.h *********************/ +/************** Begin file os_setup.h ****************************************/ /* -** Determine if we are dealing with Windows NT. +** 2013 November 25 ** -** We ought to be able to determine if we are compiling for win98 or winNT -** using the _WIN32_WINNT macro as follows: +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: ** -** #if defined(_WIN32_WINNT) -** # define SQLITE_OS_WINNT 1 -** #else -** # define SQLITE_OS_WINNT 0 -** #endif +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. ** -** However, vs2005 does not set _WIN32_WINNT by default, as it ought to, -** so the above test does not work. We'll just assume that everything is -** winNT unless the programmer explicitly says otherwise by setting -** SQLITE_OS_WINNT to 0. +****************************************************************************** +** +** This file contains pre-processor directives related to operating system +** detection and/or setup. */ -#if SQLITE_OS_WIN && !defined(SQLITE_OS_WINNT) -# define SQLITE_OS_WINNT 1 -#endif +#ifndef _OS_SETUP_H_ +#define _OS_SETUP_H_ /* -** Determine if we are dealing with WindowsCE - which has a much -** reduced API. +** Figure out if we are dealing with Unix, Windows, or some other operating +** system. +** +** After the following block of preprocess macros, all of SQLITE_OS_UNIX, +** SQLITE_OS_WIN, and SQLITE_OS_OTHER will defined to either 1 or 0. One of +** the three will be 1. The other two will be 0. */ -#if defined(_WIN32_WCE) -# define SQLITE_OS_WINCE 1 +#if defined(SQLITE_OS_OTHER) +# if SQLITE_OS_OTHER==1 +# undef SQLITE_OS_UNIX +# define SQLITE_OS_UNIX 0 +# undef SQLITE_OS_WIN +# define SQLITE_OS_WIN 0 +# else +# undef SQLITE_OS_OTHER +# endif +#endif +#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER) +# define SQLITE_OS_OTHER 0 +# ifndef SQLITE_OS_WIN +# if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || \ + defined(__MINGW32__) || defined(__BORLANDC__) +# define SQLITE_OS_WIN 1 +# define SQLITE_OS_UNIX 0 +# else +# define SQLITE_OS_WIN 0 +# define SQLITE_OS_UNIX 1 +# endif +# else +# define SQLITE_OS_UNIX 0 +# endif #else -# define SQLITE_OS_WINCE 0 +# ifndef SQLITE_OS_WIN +# define SQLITE_OS_WIN 0 +# endif #endif -/* -** Determine if we are dealing with WinRT, which provides only a subset of -** the full Win32 API. -*/ -#if !defined(SQLITE_OS_WINRT) -# define SQLITE_OS_WINRT 0 -#endif +#endif /* _OS_SETUP_H_ */ +/************** End of os_setup.h ********************************************/ +/************** Continuing where we left off in os.h *************************/ + /* If the SET_FULLSYNC macro is not defined above, then make it ** a no-op */ @@ -10022,7 +10479,7 @@ ** shared locks begins at SHARED_FIRST. ** ** The same locking strategy and -** byte ranges are used for Unix. This leaves open the possiblity of having +** byte ranges are used for Unix. This leaves open the possibility of having ** clients on win95, winNT, and unix all talking to the same shared file ** and all locking correctly. To do so would require that samba (or whatever ** tool is being used for file sharing) implements locks correctly between @@ -10141,7 +10598,7 @@ ** Figure out what version of the code to use. The choices are ** ** SQLITE_MUTEX_OMIT No mutex logic. Not even stubs. The -** mutexes implemention cannot be overridden +** mutexes implementation cannot be overridden ** at start-time. ** ** SQLITE_MUTEX_NOOP For single-threaded applications. No @@ -10230,18 +10687,18 @@ Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ u8 file_format; /* Schema format version for this file */ u8 enc; /* Text encoding used by this database */ - u16 flags; /* Flags associated with this schema */ + u16 schemaFlags; /* Flags associated with this schema */ int cache_size; /* Number of pages to use in the cache */ }; /* ** These macros can be used to test, set, or clear bits in the ** Db.pSchema->flags field. */ -#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))==(P)) -#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))!=0) -#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->flags|=(P) -#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->flags&=~(P) +#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P)) +#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))!=0) +#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags|=(P) +#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags&=~(P) /* ** Allowed values for the DB.pSchema->flags field. @@ -10261,7 +10718,7 @@ ** The number of different kinds of things that can be limited ** using the sqlite3_limit() interface. */ -#define SQLITE_N_LIMIT (SQLITE_LIMIT_TRIGGER_DEPTH+1) +#define SQLITE_N_LIMIT (SQLITE_LIMIT_WORKER_THREADS+1) /* ** Lookaside malloc is a set of fixed-size buffers that can be used @@ -10308,7 +10765,46 @@ FuncDef *a[23]; /* Hash table for functions */ }; +#ifdef SQLITE_USER_AUTHENTICATION /* +** Information held in the "sqlite3" database connection object and used +** to manage user authentication. +*/ +typedef struct sqlite3_userauth sqlite3_userauth; +struct sqlite3_userauth { + u8 authLevel; /* Current authentication level */ + int nAuthPW; /* Size of the zAuthPW in bytes */ + char *zAuthPW; /* Password used to authenticate */ + char *zAuthUser; /* User name used to authenticate */ +}; + +/* Allowed values for sqlite3_userauth.authLevel */ +#define UAUTH_Unknown 0 /* Authentication not yet checked */ +#define UAUTH_Fail 1 /* User authentication failed */ +#define UAUTH_User 2 /* Authenticated as a normal user */ +#define UAUTH_Admin 3 /* Authenticated as an administrator */ + +/* Functions used only by user authorization logic */ +SQLITE_PRIVATE int sqlite3UserAuthTable(const char*); +SQLITE_PRIVATE int sqlite3UserAuthCheckLogin(sqlite3*,const char*,u8*); +SQLITE_PRIVATE void sqlite3UserAuthInit(sqlite3*); +SQLITE_PRIVATE void sqlite3CryptFunc(sqlite3_context*,int,sqlite3_value**); + +#endif /* SQLITE_USER_AUTHENTICATION */ + +/* +** typedef for the authorization callback function. +*/ +#ifdef SQLITE_USER_AUTHENTICATION + typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, + const char*, const char*); +#else + typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, + const char*); +#endif + + +/* ** Each database connection is an instance of the following structure. */ struct sqlite3 { @@ -10325,6 +10821,7 @@ int errCode; /* Most recent error code (SQLITE_*) */ int errMask; /* & result codes with this before returning */ u16 dbOptFlags; /* Flags to enable/disable optimizations */ + u8 enc; /* Text encoding */ u8 autoCommit; /* The auto-commit flag. */ u8 temp_store; /* 1: file 2: memory 0: default */ u8 mallocFailed; /* True if we have seen a malloc failure */ @@ -10338,6 +10835,7 @@ int nChange; /* Value returned by sqlite3_changes() */ int nTotalChange; /* Value returned by sqlite3_total_changes() */ int aLimit[SQLITE_N_LIMIT]; /* Limits */ + int nMaxSorterMmap; /* Maximum size of regions mapped by sorter */ struct sqlite3InitInfo { /* Information used during initialization */ int newTnum; /* Rootpage of table being initialized */ u8 iDb; /* Which db file is being initialized */ @@ -10374,8 +10872,7 @@ } u1; Lookaside lookaside; /* Lookaside malloc configuration */ #ifndef SQLITE_OMIT_AUTHORIZATION - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); - /* Access authorization function */ + sqlite3_xauth xAuth; /* Access authorization function */ void *pAuthArg; /* 1st argument to the access auth function */ #endif #ifndef SQLITE_OMIT_PROGRESS_CALLBACK @@ -10401,7 +10898,6 @@ i64 nDeferredCons; /* Net deferred constraints this transaction. */ i64 nDeferredImmCons; /* Net deferred immediate constraints */ int *pnBytesFreed; /* If not NULL, increment this in DbFree() */ - #ifdef SQLITE_ENABLE_UNLOCK_NOTIFY /* The following variables are all protected by the STATIC_MASTER ** mutex, not by sqlite3.mutex. They are used by code in notify.c. @@ -10419,12 +10915,16 @@ void (*xUnlockNotify)(void **, int); /* Unlock notify callback */ sqlite3 *pNextBlocked; /* Next in list of all blocked connections */ #endif +#ifdef SQLITE_USER_AUTHENTICATION + sqlite3_userauth auth; /* User authentication information */ +#endif }; /* ** A macro to discover the encoding of a database. */ -#define ENC(db) ((db)->aDb[0].pSchema->enc) +#define SCHEMA_ENC(db) ((db)->aDb[0].pSchema->enc) +#define ENC(db) ((db)->enc) /* ** Possible values for the sqlite3.flags. @@ -10477,8 +10977,7 @@ #define SQLITE_SubqCoroutine 0x0100 /* Evaluate subqueries as coroutines */ #define SQLITE_Transitive 0x0200 /* Transitive constraints */ #define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */ -#define SQLITE_Stat3 0x0800 /* Use the SQLITE_STAT3 table */ -#define SQLITE_AdjustOutEst 0x1000 /* Adjust output estimates using WHERE */ +#define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */ #define SQLITE_AllOpts 0xffff /* All optimizations */ /* @@ -10565,6 +11064,7 @@ #define SQLITE_FUNC_COALESCE 0x200 /* Built-in coalesce() or ifnull() */ #define SQLITE_FUNC_UNLIKELY 0x400 /* Built-in unlikely() function */ #define SQLITE_FUNC_CONSTANT 0x800 /* Constant inputs give a constant output */ +#define SQLITE_FUNC_MINMAX 0x1000 /* True for min() and max() aggregates */ /* ** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are @@ -10612,6 +11112,9 @@ #define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \ {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \ SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0} +#define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \ + {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \ + SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0} /* ** All current savepoints are stored in a linked list starting at @@ -10698,26 +11201,26 @@ ** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve ** the speed a little by numbering the values consecutively. ** -** But rather than start with 0 or 1, we begin with 'a'. That way, +** But rather than start with 0 or 1, we begin with 'A'. That way, ** when multiple affinity types are concatenated into a string and ** used as the P4 operand, they will be more readable. ** ** Note also that the numeric types are grouped together so that testing -** for a numeric type is a single comparison. +** for a numeric type is a single comparison. And the NONE type is first. */ -#define SQLITE_AFF_TEXT 'a' -#define SQLITE_AFF_NONE 'b' -#define SQLITE_AFF_NUMERIC 'c' -#define SQLITE_AFF_INTEGER 'd' -#define SQLITE_AFF_REAL 'e' +#define SQLITE_AFF_NONE 'A' +#define SQLITE_AFF_TEXT 'B' +#define SQLITE_AFF_NUMERIC 'C' +#define SQLITE_AFF_INTEGER 'D' +#define SQLITE_AFF_REAL 'E' #define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC) /* ** The SQLITE_AFF_MASK values masks off the significant bits of an ** affinity value. */ -#define SQLITE_AFF_MASK 0x67 +#define SQLITE_AFF_MASK 0x47 /* ** Additional bit values that can be ORed with an affinity without @@ -10728,10 +11231,10 @@ ** operator is NULL. It is added to certain comparison operators to ** prove that the operands are always NOT NULL. */ -#define SQLITE_JUMPIFNULL 0x08 /* jumps if either operand is NULL */ -#define SQLITE_STOREP2 0x10 /* Store result in reg[P2] rather than jump */ +#define SQLITE_JUMPIFNULL 0x10 /* jumps if either operand is NULL */ +#define SQLITE_STOREP2 0x20 /* Store result in reg[P2] rather than jump */ #define SQLITE_NULLEQ 0x80 /* NULL=NULL */ -#define SQLITE_NOTNULL 0x88 /* Assert that operands are never NULL */ +#define SQLITE_NOTNULL 0x90 /* Assert that operands are never NULL */ /* ** An object of this type is created for each virtual table present in @@ -10825,12 +11328,15 @@ #ifndef SQLITE_OMIT_CHECK ExprList *pCheck; /* All CHECK constraints */ #endif - tRowcnt nRowEst; /* Estimated rows in table - from sqlite_stat1 table */ + LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */ int tnum; /* Root BTree node for this table (see note above) */ i16 iPKey; /* If not negative, use aCol[iPKey] as the primary key */ i16 nCol; /* Number of columns in this table */ u16 nRef; /* Number of pointers to this Table */ LogEst szTabRow; /* Estimated size of each table row in bytes */ +#ifdef SQLITE_ENABLE_COSTMULT + LogEst costMult; /* Cost multiplier for using this table */ +#endif u8 tabFlags; /* Mask of TF_* values */ u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ #ifndef SQLITE_OMIT_ALTERTABLE @@ -10998,6 +11504,7 @@ KeyInfo *pKeyInfo; /* Collation and sort-order information */ u16 nField; /* Number of entries in apMem[] */ i8 default_rc; /* Comparison result if keys are equal */ + u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */ Mem *aMem; /* Values */ int r1; /* Value to return if (lhs > rhs) */ int r2; /* Value to return if (rhs < lhs) */ @@ -11033,34 +11540,49 @@ struct Index { char *zName; /* Name of this index */ i16 *aiColumn; /* Which columns are used by this index. 1st is 0 */ - tRowcnt *aiRowEst; /* From ANALYZE: Est. rows selected by each column */ + LogEst *aiRowLogEst; /* From ANALYZE: Est. rows selected by each column */ Table *pTable; /* The SQL table being indexed */ char *zColAff; /* String defining the affinity of each column */ Index *pNext; /* The next index associated with the same table */ Schema *pSchema; /* Schema containing this index */ u8 *aSortOrder; /* for each column: True==DESC, False==ASC */ char **azColl; /* Array of collation sequence names for index */ Expr *pPartIdxWhere; /* WHERE clause for partial indices */ - KeyInfo *pKeyInfo; /* A KeyInfo object suitable for this index */ int tnum; /* DB Page containing root of this index */ LogEst szIdxRow; /* Estimated average row size in bytes */ u16 nKeyCol; /* Number of columns forming the key */ u16 nColumn; /* Number of columns stored in the index */ u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ - unsigned autoIndex:2; /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */ + unsigned idxType:2; /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */ unsigned bUnordered:1; /* Use this index for == or IN queries only */ unsigned uniqNotNull:1; /* True if UNIQUE and NOT NULL for all columns */ unsigned isResized:1; /* True if resizeIndexObject() has been called */ unsigned isCovering:1; /* True if this is a covering index */ + unsigned noSkipScan:1; /* Do not try to use skip-scan if true */ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 int nSample; /* Number of elements in aSample[] */ int nSampleCol; /* Size of IndexSample.anEq[] and so on */ tRowcnt *aAvgEq; /* Average nEq values for keys not in aSample */ IndexSample *aSample; /* Samples of the left-most key */ + tRowcnt *aiRowEst; /* Non-logarithmic stat1 data for this index */ + tRowcnt nRowEst0; /* Non-logarithmic number of rows in the index */ #endif }; /* +** Allowed values for Index.idxType +*/ +#define SQLITE_IDXTYPE_APPDEF 0 /* Created using CREATE INDEX */ +#define SQLITE_IDXTYPE_UNIQUE 1 /* Implements a UNIQUE constraint */ +#define SQLITE_IDXTYPE_PRIMARYKEY 2 /* Is the PRIMARY KEY for the table */ + +/* Return true if index X is a PRIMARY KEY index */ +#define IsPrimaryKeyIndex(X) ((X)->idxType==SQLITE_IDXTYPE_PRIMARYKEY) + +/* Return true if index X is a UNIQUE index */ +#define IsUniqueIndex(X) ((X)->onError!=OE_None) + +/* ** Each sample stored in the sqlite_stat3 table is represented in memory ** using a structure of this type. See documentation at the top of the ** analyze.c source file for additional information. @@ -11241,7 +11763,7 @@ int iTable; /* TK_COLUMN: cursor number of table holding column ** TK_REGISTER: register number ** TK_TRIGGER: 1 -> new, 0 -> old - ** EP_Unlikely: 1000 times likelihood */ + ** EP_Unlikely: 134217728 times likelihood */ ynVar iColumn; /* TK_COLUMN: column index. -1 for rowid. ** TK_VARIABLE: variable number (always >= 1). */ i16 iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */ @@ -11256,16 +11778,16 @@ /* ** The following are the meanings of bits in the Expr.flags field. */ -#define EP_FromJoin 0x000001 /* Originated in ON or USING clause of a join */ +#define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */ #define EP_Agg 0x000002 /* Contains one or more aggregate functions */ #define EP_Resolved 0x000004 /* IDs have been resolved to COLUMNs */ #define EP_Error 0x000008 /* Expression contains one or more errors */ #define EP_Distinct 0x000010 /* Aggregate function with DISTINCT keyword */ #define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */ #define EP_DblQuoted 0x000040 /* token.z was originally in "..." */ #define EP_InfixFunc 0x000080 /* True for an infix function: LIKE, GLOB, etc */ -#define EP_Collate 0x000100 /* Tree contains a TK_COLLATE opeartor */ - /* unused 0x000200 */ +#define EP_Collate 0x000100 /* Tree contains a TK_COLLATE operator */ +#define EP_Generic 0x000200 /* Ignore COLLATE or affinity on this tree */ #define EP_IntValue 0x000400 /* Integer value contained in u.iValue */ #define EP_xIsSelect 0x000800 /* x.pSelect is valid (otherwise x.pList is) */ #define EP_Skip 0x001000 /* COLLATE, AS, or UNLIKELY */ @@ -11276,6 +11798,7 @@ #define EP_NoReduce 0x020000 /* Cannot EXPRDUP_REDUCE this Expr */ #define EP_Unlikely 0x040000 /* unlikely() or likelihood() function */ #define EP_Constant 0x080000 /* Node is a constant */ +#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */ /* ** These macros can be used to test, set, or clear bits in the @@ -11329,7 +11852,6 @@ */ struct ExprList { int nExpr; /* Number of expressions on the list */ - int iECursor; /* VDBE Cursor associated with this ExprList */ struct ExprList_item { /* For each expression in the list */ Expr *pExpr; /* The list of expressions */ char *zName; /* Token associated with this expression */ @@ -11475,10 +11997,12 @@ #define WHERE_OMIT_OPEN_CLOSE 0x0010 /* Table cursors are already open */ #define WHERE_FORCE_TABLE 0x0020 /* Do not use an index-only search */ #define WHERE_ONETABLE_ONLY 0x0040 /* Only code the 1st table in pTabList */ -#define WHERE_AND_ONLY 0x0080 /* Don't use indices for OR terms */ + /* 0x0080 // not currently used */ #define WHERE_GROUPBY 0x0100 /* pOrderBy is really a GROUP BY */ #define WHERE_DISTINCTBY 0x0200 /* pOrderby is really a DISTINCT clause */ #define WHERE_WANT_DISTINCT 0x0400 /* All output needs to be distinct */ +#define WHERE_SORTBYGROUP 0x0800 /* Support sqlite3WhereIsSorted() */ +#define WHERE_REOPEN_IDX 0x1000 /* Try to use OP_ReopenIdx */ /* Allowed return values from sqlite3WhereIsDistinct() */ @@ -11516,17 +12040,22 @@ NameContext *pNext; /* Next outer name context. NULL for outermost */ int nRef; /* Number of names resolved by this context */ int nErr; /* Number of errors encountered while resolving names */ - u8 ncFlags; /* Zero or more NC_* flags defined below */ + u16 ncFlags; /* Zero or more NC_* flags defined below */ }; /* ** Allowed values for the NameContext, ncFlags field. +** +** Note: NC_MinMaxAgg must have the same value as SF_MinMaxAgg and +** SQLITE_FUNC_MINMAX. +** */ -#define NC_AllowAgg 0x01 /* Aggregate functions are allowed here */ -#define NC_HasAgg 0x02 /* One or more aggregate functions seen */ -#define NC_IsCheck 0x04 /* True if resolving names in a CHECK constraint */ -#define NC_InAggFunc 0x08 /* True if analyzing arguments to an agg func */ -#define NC_PartIdx 0x10 /* True if resolving a partial index WHERE */ +#define NC_AllowAgg 0x0001 /* Aggregate functions are allowed here */ +#define NC_HasAgg 0x0002 /* One or more aggregate functions seen */ +#define NC_IsCheck 0x0004 /* True if resolving names in a CHECK constraint */ +#define NC_InAggFunc 0x0008 /* True if analyzing arguments to an agg func */ +#define NC_PartIdx 0x0010 /* True if resolving a partial index WHERE */ +#define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */ /* ** An instance of the following structure contains all information @@ -11553,7 +12082,10 @@ u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */ u16 selFlags; /* Various SF_* values */ int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */ - int addrOpenEphm[3]; /* OP_OpenEphem opcodes related to this select */ +#if SELECTTRACE_ENABLED + char zSelName[12]; /* Symbolic name of this SELECT use for debugging */ +#endif + int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */ u64 nSelectRow; /* Estimated number of result rows */ SrcList *pSrc; /* The FROM clause */ Expr *pWhere; /* The WHERE clause */ @@ -11577,13 +12109,13 @@ #define SF_UsesEphemeral 0x0008 /* Uses the OpenEphemeral opcode */ #define SF_Expanded 0x0010 /* sqlite3SelectExpand() called on this */ #define SF_HasTypeInfo 0x0020 /* FROM subqueries have Table metadata */ -#define SF_UseSorter 0x0040 /* Sort using a sorter */ +#define SF_Compound 0x0040 /* Part of a compound query */ #define SF_Values 0x0080 /* Synthesized from VALUES clause */ -#define SF_Materialize 0x0100 /* NOT USED */ +#define SF_AllValues 0x0100 /* All terms of compound are VALUES */ #define SF_NestedFrom 0x0200 /* Part of a parenthesized FROM clause */ #define SF_MaybeConvert 0x0400 /* Need convertCompoundSelectToSubquery() */ #define SF_Recursive 0x0800 /* The recursive part of a recursive CTE */ -#define SF_Compound 0x1000 /* Part of a compound query */ +#define SF_MinMaxAgg 0x1000 /* Aggregate containing min() or max() */ /* @@ -11632,13 +12164,15 @@ ** starting with pDest->iSdst. ** ** SRT_Table Store results in temporary table pDest->iSDParm. -** This is like SRT_EphemTab except that the table -** is assumed to already be open. +** SRT_Fifo This is like SRT_EphemTab except that the table +** is assumed to already be open. SRT_Fifo has +** the additional property of being able to ignore +** the ORDER BY clause. ** -** SRT_DistTable Store results in a temporary table pDest->iSDParm. +** SRT_DistFifo Store results in a temporary table pDest->iSDParm. ** But also use temporary table pDest->iSDParm+1 as ** a record of all prior results and ignore any duplicate -** rows. Name means: "Distinct Table". +** rows. Name means: "Distinct Fifo". ** ** SRT_Queue Store results in priority queue pDest->iSDParm (really ** an index). Append a sequence number so that all entries @@ -11652,19 +12186,20 @@ #define SRT_Except 2 /* Remove result from a UNION index */ #define SRT_Exists 3 /* Store 1 if the result is not empty */ #define SRT_Discard 4 /* Do not save the results anywhere */ +#define SRT_Fifo 5 /* Store result as data with an automatic rowid */ +#define SRT_DistFifo 6 /* Like SRT_Fifo, but unique results only */ +#define SRT_Queue 7 /* Store result in an queue */ +#define SRT_DistQueue 8 /* Like SRT_Queue, but unique results only */ /* The ORDER BY clause is ignored for all of the above */ -#define IgnorableOrderby(X) ((X->eDest)<=SRT_Discard) +#define IgnorableOrderby(X) ((X->eDest)<=SRT_DistQueue) -#define SRT_Output 5 /* Output each row of result */ -#define SRT_Mem 6 /* Store result in a memory cell */ -#define SRT_Set 7 /* Store results as keys in an index */ -#define SRT_EphemTab 8 /* Create transient tab and store like SRT_Table */ -#define SRT_Coroutine 9 /* Generate a single row of result */ -#define SRT_Table 10 /* Store result as data with an automatic rowid */ -#define SRT_DistTable 11 /* Like SRT_Table, but unique results only */ -#define SRT_Queue 12 /* Store result in an queue */ -#define SRT_DistQueue 13 /* Like SRT_Queue, but unique results only */ +#define SRT_Output 9 /* Output each row of result */ +#define SRT_Mem 10 /* Store result in a memory cell */ +#define SRT_Set 11 /* Store results as keys in an index */ +#define SRT_EphemTab 12 /* Create transient tab and store like SRT_Table */ +#define SRT_Coroutine 13 /* Generate a single row of result */ +#define SRT_Table 14 /* Store result as data with an automatic rowid */ /* ** An instance of this object describes where to put of the results of @@ -11732,9 +12267,19 @@ ** The yDbMask datatype for the bitmask of all attached databases. */ #if SQLITE_MAX_ATTACHED>30 - typedef sqlite3_uint64 yDbMask; + typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8]; +# define DbMaskTest(M,I) (((M)[(I)/8]&(1<<((I)&7)))!=0) +# define DbMaskZero(M) memset((M),0,sizeof(M)) +# define DbMaskSet(M,I) (M)[(I)/8]|=(1<<((I)&7)) +# define DbMaskAllZero(M) sqlite3DbMaskAllZero(M) +# define DbMaskNonZero(M) (sqlite3DbMaskAllZero(M)==0) #else typedef unsigned int yDbMask; +# define DbMaskTest(M,I) (((M)&(((yDbMask)1)<<(I)))!=0) +# define DbMaskZero(M) (M)=0 +# define DbMaskSet(M,I) (M)|=(((yDbMask)1)<<(I)) +# define DbMaskAllZero(M) (M)==0 +# define DbMaskNonZero(M) (M)!=0 #endif /* @@ -11762,8 +12307,6 @@ u8 checkSchema; /* Causes schema cookie check after an error */ u8 nested; /* Number of nested calls to the parser/code generator */ u8 nTempReg; /* Number of temporary registers in aTempReg[] */ - u8 nColCache; /* Number of entries in aColCache[] */ - u8 iColCache; /* Next entry in aColCache[] to replace */ u8 isMultiWrite; /* True if statement may modify/insert multiple rows */ u8 mayAbort; /* True if statement may throw an ABORT exception */ u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */ @@ -11800,6 +12343,10 @@ int regRowid; /* Register holding rowid of CREATE TABLE entry */ int regRoot; /* Register holding root page number for new objects */ int nMaxArg; /* Max args passed to user function by sub-program */ +#if SELECTTRACE_ENABLED + int nSelect; /* Number of SELECT statements seen */ + int nSelectIndent; /* How far to indent SELECTTRACE() output */ +#endif #ifndef SQLITE_OMIT_SHARED_CACHE int nTableLock; /* Number of locks in aTableLock */ TableLock *aTableLock; /* Required table locks for shared-cache mode */ @@ -11879,11 +12426,11 @@ ** Bitfield flags for P5 value in various opcodes. */ #define OPFLAG_NCHANGE 0x01 /* Set to update db->nChange */ +#define OPFLAG_EPHEM 0x01 /* OP_Column: Ephemeral output is ok */ #define OPFLAG_LASTROWID 0x02 /* Set to update db->lastRowid */ #define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */ #define OPFLAG_APPEND 0x08 /* This is likely to be an append */ #define OPFLAG_USESEEKRESULT 0x10 /* Try to avoid a seek in BtreeInsert() */ -#define OPFLAG_CLEARCACHE 0x20 /* Clear pseudo-table cache in OP_Column */ #define OPFLAG_LENGTHARG 0x40 /* OP_Column only used for length() */ #define OPFLAG_TYPEOFARG 0x80 /* OP_Column only used for typeof() */ #define OPFLAG_BULKCSR 0x01 /* OP_Open** used to open bulk cursor */ @@ -12054,18 +12601,18 @@ int nPage; /* Number of pages in pPage[] */ int mxParserStack; /* maximum depth of the parser stack */ int sharedCacheEnabled; /* true if shared-cache mode enabled */ + u32 szPma; /* Maximum Sorter PMA size */ /* The above might be initialized to non-zero. The following need to always ** initially be zero, however. */ int isInit; /* True after initialization has finished */ int inProgress; /* True while initialization in progress */ int isMutexInit; /* True after mutexes are initialized */ int isMallocInit; /* True after malloc is initialized */ int isPCacheInit; /* True after malloc is initialized */ - sqlite3_mutex *pInitMutex; /* Mutex used by sqlite3_initialize() */ int nRefInitMutex; /* Number of users of pInitMutex */ + sqlite3_mutex *pInitMutex; /* Mutex used by sqlite3_initialize() */ void (*xLog)(void*,int,const char*); /* Function for logging */ void *pLogArg; /* First argument to xLog() */ - int bLocaltimeFault; /* True to fail localtime() calls */ #ifdef SQLITE_ENABLE_SQLLOG void(*xSqllog)(void*,sqlite3*,const char*, int); void *pSqllogArg; @@ -12077,6 +12624,10 @@ void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */ void *pVdbeBranchArg; /* 1st argument */ #endif +#ifndef SQLITE_OMIT_BUILTIN_TEST + int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */ +#endif + int bLocaltimeFault; /* True to fail localtime() calls */ }; /* @@ -12106,9 +12657,11 @@ void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */ Parse *pParse; /* Parser context. */ int walkerDepth; /* Number of subqueries */ + u8 eCode; /* A small processing code */ union { /* Extra data for callback */ NameContext *pNC; /* Naming context */ - int i; /* Integer value */ + int n; /* A counter */ + int iCur; /* A cursor number */ SrcList *pSrcList; /* FROM clause */ struct SrcCount *pSrcCount; /* Counting column references */ } u; @@ -12144,7 +12697,18 @@ } a[1]; }; +#ifdef SQLITE_DEBUG /* +** An instance of the TreeView object is used for printing the content of +** data structures on sqlite3DebugPrintf() using a tree-like view. +*/ +struct TreeView { + int iLevel; /* Which level of the tree we are on */ + u8 bLine[100]; /* Draw vertical in column i if bLine[i] is true */ +}; +#endif /* SQLITE_DEBUG */ + +/* ** Assuming zIn points to the first byte of a UTF-8 character, ** advance zIn to point to the first byte of the next UTF-8 character. */ @@ -12171,11 +12735,11 @@ /* ** FTS4 is really an extension for FTS3. It is enabled using the -** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also all -** the SQLITE_ENABLE_FTS4 macro to serve as an alisse for SQLITE_ENABLE_FTS3. +** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also call +** the SQLITE_ENABLE_FTS4 macro to serve as an alias for SQLITE_ENABLE_FTS3. */ #if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3) -# define SQLITE_ENABLE_FTS3 +# define SQLITE_ENABLE_FTS3 1 #endif /* @@ -12209,6 +12773,7 @@ # define sqlite3Isxdigit(x) isxdigit((unsigned char)(x)) # define sqlite3Tolower(x) tolower((unsigned char)(x)) #endif +SQLITE_PRIVATE int sqlite3IsIdChar(u8); /* ** Internal function prototypes @@ -12219,15 +12784,15 @@ SQLITE_PRIVATE int sqlite3MallocInit(void); SQLITE_PRIVATE void sqlite3MallocEnd(void); -SQLITE_PRIVATE void *sqlite3Malloc(int); -SQLITE_PRIVATE void *sqlite3MallocZero(int); -SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3*, int); -SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3*, int); +SQLITE_PRIVATE void *sqlite3Malloc(u64); +SQLITE_PRIVATE void *sqlite3MallocZero(u64); +SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3*, u64); +SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3*, u64); SQLITE_PRIVATE char *sqlite3DbStrDup(sqlite3*,const char*); -SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, int); -SQLITE_PRIVATE void *sqlite3Realloc(void*, int); -SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, int); -SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, int); +SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, u64); +SQLITE_PRIVATE void *sqlite3Realloc(void*, u64); +SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64); +SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, u64); SQLITE_PRIVATE void sqlite3DbFree(sqlite3*, void*); SQLITE_PRIVATE int sqlite3MallocSize(void*); SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3*, void*); @@ -12307,25 +12872,14 @@ SQLITE_PRIVATE void *sqlite3TestTextToPtr(const char*); #endif -/* Output formatting for SQLITE_TESTCTRL_EXPLAIN */ -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) -SQLITE_PRIVATE void sqlite3ExplainBegin(Vdbe*); -SQLITE_PRIVATE void sqlite3ExplainPrintf(Vdbe*, const char*, ...); -SQLITE_PRIVATE void sqlite3ExplainNL(Vdbe*); -SQLITE_PRIVATE void sqlite3ExplainPush(Vdbe*); -SQLITE_PRIVATE void sqlite3ExplainPop(Vdbe*); -SQLITE_PRIVATE void sqlite3ExplainFinish(Vdbe*); -SQLITE_PRIVATE void sqlite3ExplainSelect(Vdbe*, Select*); -SQLITE_PRIVATE void sqlite3ExplainExpr(Vdbe*, Expr*); -SQLITE_PRIVATE void sqlite3ExplainExprList(Vdbe*, ExprList*); -SQLITE_PRIVATE const char *sqlite3VdbeExplanation(Vdbe*); -#else -# define sqlite3ExplainBegin(X) -# define sqlite3ExplainSelect(A,B) -# define sqlite3ExplainExpr(A,B) -# define sqlite3ExplainExprList(A,B) -# define sqlite3ExplainFinish(X) -# define sqlite3VdbeExplanation(X) 0 +#if defined(SQLITE_DEBUG) +SQLITE_PRIVATE TreeView *sqlite3TreeViewPush(TreeView*,u8); +SQLITE_PRIVATE void sqlite3TreeViewPop(TreeView*); +SQLITE_PRIVATE void sqlite3TreeViewLine(TreeView*, const char*, ...); +SQLITE_PRIVATE void sqlite3TreeViewItem(TreeView*, const char*, u8); +SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView*, const Expr*, u8); +SQLITE_PRIVATE void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*); +SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView*, const Select*, u8); #endif @@ -12378,6 +12932,12 @@ SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*); SQLITE_PRIVATE int sqlite3CodeOnce(Parse *); +#ifdef SQLITE_OMIT_BUILTIN_TEST +# define sqlite3FaultSim(X) SQLITE_OK +#else +SQLITE_PRIVATE int sqlite3FaultSim(int); +#endif + SQLITE_PRIVATE Bitvec *sqlite3BitvecCreate(u32); SQLITE_PRIVATE int sqlite3BitvecTest(Bitvec*, u32); SQLITE_PRIVATE int sqlite3BitvecSet(Bitvec*, u32); @@ -12389,7 +12949,7 @@ SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int); SQLITE_PRIVATE void sqlite3RowSetClear(RowSet*); SQLITE_PRIVATE void sqlite3RowSetInsert(RowSet*, i64); -SQLITE_PRIVATE int sqlite3RowSetTest(RowSet*, u8 iBatch, i64); +SQLITE_PRIVATE int sqlite3RowSetTest(RowSet*, int iBatch, i64); SQLITE_PRIVATE int sqlite3RowSetNext(RowSet*, i64*); SQLITE_PRIVATE void sqlite3CreateView(Parse*,Token*,Token*,Token*,Select*,int,int); @@ -12400,6 +12960,9 @@ # define sqlite3ViewGetColumnNames(A,B) 0 #endif +#if SQLITE_MAX_ATTACHED>30 +SQLITE_PRIVATE int sqlite3DbMaskAllZero(yDbMask); +#endif SQLITE_PRIVATE void sqlite3DropTable(Parse*, SrcList*, int, int); SQLITE_PRIVATE void sqlite3CodeDropTable(Parse*, Table*, int, int); SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3*, Table*); @@ -12445,6 +13008,7 @@ SQLITE_PRIVATE u64 sqlite3WhereOutputRowCount(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo*); +SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereOkOnePass(WhereInfo*, int*); @@ -12453,7 +13017,7 @@ SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse*, int, int, int); SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse*, int, int, int); SQLITE_PRIVATE void sqlite3ExprCachePush(Parse*); -SQLITE_PRIVATE void sqlite3ExprCachePop(Parse*, int); +SQLITE_PRIVATE void sqlite3ExprCachePop(Parse*); SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse*, int, int); SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse*); SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse*, int, int); @@ -12497,14 +13061,16 @@ SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3*); SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr*); -SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr*); +SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr*, u8); +SQLITE_PRIVATE int sqlite3ExprIsTableConstant(Expr*,int); SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr*, int*); SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr*); SQLITE_PRIVATE int sqlite3ExprNeedsNoAffinityChange(const Expr*, char); SQLITE_PRIVATE int sqlite3IsRowid(const char*); SQLITE_PRIVATE void sqlite3GenerateRowDelete(Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8); SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*); SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int); +SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int); SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int, u8,u8,int,int*); SQLITE_PRIVATE void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int); @@ -12520,6 +13086,11 @@ SQLITE_PRIVATE SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int); SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3*,IdList*); SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3*,Select*,int); +#if SELECTTRACE_ENABLED +SQLITE_PRIVATE void sqlite3SelectSetName(Select*,const char*); +#else +# define sqlite3SelectSetName(A,B) +#endif SQLITE_PRIVATE void sqlite3FuncDefInsert(FuncDefHash*, FuncDef*); SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,u8); SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(sqlite3*); @@ -12606,38 +13177,23 @@ /* ** Routines to read and write variable-length integers. These used to ** be defined locally, but now we use the varint routines in the util.c -** file. Code should use the MACRO forms below, as the Varint32 versions -** are coded to assume the single byte case is already handled (which -** the MACRO form does). +** file. */ SQLITE_PRIVATE int sqlite3PutVarint(unsigned char*, u64); -SQLITE_PRIVATE int sqlite3PutVarint32(unsigned char*, u32); SQLITE_PRIVATE u8 sqlite3GetVarint(const unsigned char *, u64 *); SQLITE_PRIVATE u8 sqlite3GetVarint32(const unsigned char *, u32 *); SQLITE_PRIVATE int sqlite3VarintLen(u64 v); /* -** The header of a record consists of a sequence variable-length integers. -** These integers are almost always small and are encoded as a single byte. -** The following macros take advantage this fact to provide a fast encode -** and decode of the integers in a record header. It is faster for the common -** case where the integer is a single byte. It is a little slower when the -** integer is two or more bytes. But overall it is faster. -** -** The following expressions are equivalent: -** -** x = sqlite3GetVarint32( A, &B ); -** x = sqlite3PutVarint32( A, B ); -** -** x = getVarint32( A, B ); -** x = putVarint32( A, B ); -** +** The common case is for a varint to be a single byte. They following +** macros handle the common case without a procedure call, but then call +** the procedure for larger varints. */ #define getVarint32(A,B) \ (u8)((*(A)<(u8)0x80)?((B)=(u32)*(A)),1:sqlite3GetVarint32((A),(u32 *)&(B))) #define putVarint32(A,B) \ (u8)(((u32)(B)<(u32)0x80)?(*(A)=(unsigned char)(B)),1:\ - sqlite3PutVarint32((A),(B))) + sqlite3PutVarint((A),(B))) #define getVarint sqlite3GetVarint #define putVarint sqlite3PutVarint @@ -12648,7 +13204,9 @@ SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity); SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr); SQLITE_PRIVATE int sqlite3Atoi64(const char*, i64*, int, u8); -SQLITE_PRIVATE void sqlite3Error(sqlite3*, int, const char*,...); +SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char*, i64*); +SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...); +SQLITE_PRIVATE void sqlite3Error(sqlite3*,int); SQLITE_PRIVATE void *sqlite3HexToBlob(sqlite3*, const char *z, int n); SQLITE_PRIVATE u8 sqlite3HexToInt(int h); SQLITE_PRIVATE int sqlite3TwoPartName(Parse *, Token *, Token *, Token **); @@ -12662,7 +13220,7 @@ SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int); SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName); SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr); -SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, Token*); +SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*); SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*); SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*); SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *, CollSeq *); @@ -12677,7 +13235,7 @@ #else # define sqlite3FileSuffix3(X,Y) #endif -SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z,int); +SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z,u8); SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value*, u8); SQLITE_PRIVATE int sqlite3ValueBytes(sqlite3_value*, u8); @@ -12750,7 +13308,7 @@ SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum*, char*, int, int); SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum*,const char*,int); SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum*,const char*); -SQLITE_PRIVATE void sqlite3AppendSpace(StrAccum*,int); +SQLITE_PRIVATE void sqlite3AppendChar(StrAccum*,int,char); SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum*); SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum*); SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest*,int,int); @@ -12762,13 +13320,15 @@ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void); SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*); +SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**); SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord*); +SQLITE_PRIVATE int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**); #endif /* ** The interface to the LEMON-generated parser */ -SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(size_t)); +SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64)); SQLITE_PRIVATE void sqlite3ParserFree(void*, void(*)(void*)); SQLITE_PRIVATE void sqlite3Parser(void*, int, Token, Parse*); #ifdef YYTRACKMAXSTACKDEPTH @@ -12899,11 +13459,21 @@ #define sqlite3EndBenignMalloc() #endif -#define IN_INDEX_ROWID 1 -#define IN_INDEX_EPH 2 -#define IN_INDEX_INDEX_ASC 3 -#define IN_INDEX_INDEX_DESC 4 -SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, int*); +/* +** Allowed return values from sqlite3FindInIndex() +*/ +#define IN_INDEX_ROWID 1 /* Search the rowid of the table */ +#define IN_INDEX_EPH 2 /* Search an ephemeral b-tree */ +#define IN_INDEX_INDEX_ASC 3 /* Existing index ASCENDING */ +#define IN_INDEX_INDEX_DESC 4 /* Existing index DESCENDING */ +#define IN_INDEX_NOOP 5 /* No table available. Use comparisons */ +/* +** Allowed flags for the 3rd parameter to sqlite3FindInIndex(). +*/ +#define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */ +#define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */ +#define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */ +SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*); #ifdef SQLITE_ENABLE_ATOMIC_WRITE SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int); @@ -12954,7 +13524,7 @@ #ifdef SQLITE_ENABLE_IOTRACE # define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; } SQLITE_PRIVATE void sqlite3VdbeIOTraceSql(Vdbe*); -SQLITE_PRIVATE void (*sqlite3IoTrace)(const char*,...); +void (*sqlite3IoTrace)(const char*,...); #else # define IOTRACE(A) # define sqlite3VdbeIOTraceSql(X) @@ -12998,11 +13568,18 @@ # define sqlite3MemdebugNoType(X,Y) 1 #endif #define MEMTYPE_HEAP 0x01 /* General heap allocations */ -#define MEMTYPE_LOOKASIDE 0x02 /* Might have been lookaside memory */ +#define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */ #define MEMTYPE_SCRATCH 0x04 /* Scratch allocations */ #define MEMTYPE_PCACHE 0x08 /* Page cache allocations */ -#define MEMTYPE_DB 0x10 /* Uses sqlite3DbMalloc, not sqlite_malloc */ +/* +** Threading interface +*/ +#if SQLITE_MAX_WORKER_THREADS>0 +SQLITE_PRIVATE int sqlite3ThreadCreate(SQLiteThread**,void*(*)(void*),void*); +SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread*, void**); +#endif + #endif /* _SQLITEINT_H_ */ /************** End of sqliteInt.h *******************************************/ @@ -13019,7 +13596,7 @@ ** ************************************************************************* ** -** This file contains definitions of global variables and contants. +** This file contains definitions of global variables and constants. */ /* An array to map all upper-case characters into their corresponding @@ -13137,14 +13714,36 @@ }; #endif +/* EVIDENCE-OF: R-02982-34736 In order to maintain full backwards +** compatibility for legacy applications, the URI filename capability is +** disabled by default. +** +** EVIDENCE-OF: R-38799-08373 URI filenames can be enabled or disabled +** using the SQLITE_USE_URI=1 or SQLITE_USE_URI=0 compile-time options. +** +** EVIDENCE-OF: R-43642-56306 By default, URI handling is globally +** disabled. The default value may be changed by compiling with the +** SQLITE_USE_URI symbol defined. +*/ #ifndef SQLITE_USE_URI # define SQLITE_USE_URI 0 #endif +/* EVIDENCE-OF: R-38720-18127 The default setting is determined by the +** SQLITE_ALLOW_COVERING_INDEX_SCAN compile-time option, or is "on" if +** that compile-time option is omitted. +*/ #ifndef SQLITE_ALLOW_COVERING_INDEX_SCAN # define SQLITE_ALLOW_COVERING_INDEX_SCAN 1 #endif +/* The minimum PMA size is set to this value multiplied by the database +** page size in bytes. +*/ +#ifndef SQLITE_SORTER_PMASZ +# define SQLITE_SORTER_PMASZ 250 +#endif + /* ** The following singleton contains the global configuration for ** the SQLite library. @@ -13175,21 +13774,29 @@ 0, /* nPage */ 0, /* mxParserStack */ 0, /* sharedCacheEnabled */ + SQLITE_SORTER_PMASZ, /* szPma */ /* All the rest should always be initialized to zero */ 0, /* isInit */ 0, /* inProgress */ 0, /* isMutexInit */ 0, /* isMallocInit */ 0, /* isPCacheInit */ - 0, /* pInitMutex */ 0, /* nRefInitMutex */ + 0, /* pInitMutex */ 0, /* xLog */ 0, /* pLogArg */ - 0, /* bLocaltimeFault */ #ifdef SQLITE_ENABLE_SQLLOG 0, /* xSqllog */ - 0 /* pSqllogArg */ + 0, /* pSqllogArg */ #endif +#ifdef SQLITE_VDBE_COVERAGE + 0, /* xVdbeBranch */ + 0, /* pVbeBranchArg */ +#endif +#ifndef SQLITE_OMIT_BUILTIN_TEST + 0, /* xTestCallback */ +#endif + 0 /* bLocaltimeFault */ }; /* @@ -13223,8 +13830,8 @@ ** ** IMPORTANT: Changing the pending byte to any value other than ** 0x40000000 results in an incompatible database file format! -** Changing the pending byte during operating results in undefined -** and dileterious behavior. +** Changing the pending byte during operation will result in undefined +** and incorrect behavior. */ #ifndef SQLITE_OMIT_WSD SQLITE_PRIVATE int sqlite3PendingByte = 0x40000000; @@ -13274,120 +13881,123 @@ #define CTIMEOPT_VAL_(opt) #opt #define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt) -#ifdef SQLITE_32BIT_ROWID +#if SQLITE_32BIT_ROWID "32BIT_ROWID", #endif -#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC +#if SQLITE_4_BYTE_ALIGNED_MALLOC "4_BYTE_ALIGNED_MALLOC", #endif -#ifdef SQLITE_CASE_SENSITIVE_LIKE +#if SQLITE_CASE_SENSITIVE_LIKE "CASE_SENSITIVE_LIKE", #endif -#ifdef SQLITE_CHECK_PAGES +#if SQLITE_CHECK_PAGES "CHECK_PAGES", #endif -#ifdef SQLITE_COVERAGE_TEST +#if SQLITE_COVERAGE_TEST "COVERAGE_TEST", #endif -#ifdef SQLITE_DEBUG +#if SQLITE_DEBUG "DEBUG", #endif -#ifdef SQLITE_DEFAULT_LOCKING_MODE +#if SQLITE_DEFAULT_LOCKING_MODE "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE), #endif #if defined(SQLITE_DEFAULT_MMAP_SIZE) && !defined(SQLITE_DEFAULT_MMAP_SIZE_xc) "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE), #endif -#ifdef SQLITE_DISABLE_DIRSYNC +#if SQLITE_DISABLE_DIRSYNC "DISABLE_DIRSYNC", #endif -#ifdef SQLITE_DISABLE_LFS +#if SQLITE_DISABLE_LFS "DISABLE_LFS", #endif -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if SQLITE_ENABLE_API_ARMOR + "ENABLE_API_ARMOR", +#endif +#if SQLITE_ENABLE_ATOMIC_WRITE "ENABLE_ATOMIC_WRITE", #endif -#ifdef SQLITE_ENABLE_CEROD +#if SQLITE_ENABLE_CEROD "ENABLE_CEROD", #endif -#ifdef SQLITE_ENABLE_COLUMN_METADATA +#if SQLITE_ENABLE_COLUMN_METADATA "ENABLE_COLUMN_METADATA", #endif -#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT +#if SQLITE_ENABLE_EXPENSIVE_ASSERT "ENABLE_EXPENSIVE_ASSERT", #endif -#ifdef SQLITE_ENABLE_FTS1 +#if SQLITE_ENABLE_FTS1 "ENABLE_FTS1", #endif -#ifdef SQLITE_ENABLE_FTS2 +#if SQLITE_ENABLE_FTS2 "ENABLE_FTS2", #endif -#ifdef SQLITE_ENABLE_FTS3 +#if SQLITE_ENABLE_FTS3 "ENABLE_FTS3", #endif -#ifdef SQLITE_ENABLE_FTS3_PARENTHESIS +#if SQLITE_ENABLE_FTS3_PARENTHESIS "ENABLE_FTS3_PARENTHESIS", #endif -#ifdef SQLITE_ENABLE_FTS4 +#if SQLITE_ENABLE_FTS4 "ENABLE_FTS4", #endif -#ifdef SQLITE_ENABLE_ICU +#if SQLITE_ENABLE_ICU "ENABLE_ICU", #endif -#ifdef SQLITE_ENABLE_IOTRACE +#if SQLITE_ENABLE_IOTRACE "ENABLE_IOTRACE", #endif -#ifdef SQLITE_ENABLE_LOAD_EXTENSION +#if SQLITE_ENABLE_LOAD_EXTENSION "ENABLE_LOAD_EXTENSION", #endif -#ifdef SQLITE_ENABLE_LOCKING_STYLE +#if SQLITE_ENABLE_LOCKING_STYLE "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE), #endif -#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT +#if SQLITE_ENABLE_MEMORY_MANAGEMENT "ENABLE_MEMORY_MANAGEMENT", #endif -#ifdef SQLITE_ENABLE_MEMSYS3 +#if SQLITE_ENABLE_MEMSYS3 "ENABLE_MEMSYS3", #endif -#ifdef SQLITE_ENABLE_MEMSYS5 +#if SQLITE_ENABLE_MEMSYS5 "ENABLE_MEMSYS5", #endif -#ifdef SQLITE_ENABLE_OVERSIZE_CELL_CHECK +#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK "ENABLE_OVERSIZE_CELL_CHECK", #endif -#ifdef SQLITE_ENABLE_RTREE +#if SQLITE_ENABLE_RTREE "ENABLE_RTREE", #endif #if defined(SQLITE_ENABLE_STAT4) "ENABLE_STAT4", #elif defined(SQLITE_ENABLE_STAT3) "ENABLE_STAT3", #endif -#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY +#if SQLITE_ENABLE_UNLOCK_NOTIFY "ENABLE_UNLOCK_NOTIFY", #endif -#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT +#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT "ENABLE_UPDATE_DELETE_LIMIT", #endif -#ifdef SQLITE_HAS_CODEC +#if SQLITE_HAS_CODEC "HAS_CODEC", #endif -#ifdef SQLITE_HAVE_ISNAN +#if HAVE_ISNAN || SQLITE_HAVE_ISNAN "HAVE_ISNAN", #endif -#ifdef SQLITE_HOMEGROWN_RECURSIVE_MUTEX +#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX "HOMEGROWN_RECURSIVE_MUTEX", #endif -#ifdef SQLITE_IGNORE_AFP_LOCK_ERRORS +#if SQLITE_IGNORE_AFP_LOCK_ERRORS "IGNORE_AFP_LOCK_ERRORS", #endif -#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS +#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS "IGNORE_FLOCK_LOCK_ERRORS", #endif #ifdef SQLITE_INT64_TYPE "INT64_TYPE", #endif -#ifdef SQLITE_LOCK_TRACE +#if SQLITE_LOCK_TRACE "LOCK_TRACE", #endif #if defined(SQLITE_MAX_MMAP_SIZE) && !defined(SQLITE_MAX_MMAP_SIZE_xc) @@ -13396,223 +14006,226 @@ #ifdef SQLITE_MAX_SCHEMA_RETRY "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY), #endif -#ifdef SQLITE_MEMDEBUG +#if SQLITE_MEMDEBUG "MEMDEBUG", #endif -#ifdef SQLITE_MIXED_ENDIAN_64BIT_FLOAT +#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT "MIXED_ENDIAN_64BIT_FLOAT", #endif -#ifdef SQLITE_NO_SYNC +#if SQLITE_NO_SYNC "NO_SYNC", #endif -#ifdef SQLITE_OMIT_ALTERTABLE +#if SQLITE_OMIT_ALTERTABLE "OMIT_ALTERTABLE", #endif -#ifdef SQLITE_OMIT_ANALYZE +#if SQLITE_OMIT_ANALYZE "OMIT_ANALYZE", #endif -#ifdef SQLITE_OMIT_ATTACH +#if SQLITE_OMIT_ATTACH "OMIT_ATTACH", #endif -#ifdef SQLITE_OMIT_AUTHORIZATION +#if SQLITE_OMIT_AUTHORIZATION "OMIT_AUTHORIZATION", #endif -#ifdef SQLITE_OMIT_AUTOINCREMENT +#if SQLITE_OMIT_AUTOINCREMENT "OMIT_AUTOINCREMENT", #endif -#ifdef SQLITE_OMIT_AUTOINIT +#if SQLITE_OMIT_AUTOINIT "OMIT_AUTOINIT", #endif -#ifdef SQLITE_OMIT_AUTOMATIC_INDEX +#if SQLITE_OMIT_AUTOMATIC_INDEX "OMIT_AUTOMATIC_INDEX", #endif -#ifdef SQLITE_OMIT_AUTORESET +#if SQLITE_OMIT_AUTORESET "OMIT_AUTORESET", #endif -#ifdef SQLITE_OMIT_AUTOVACUUM +#if SQLITE_OMIT_AUTOVACUUM "OMIT_AUTOVACUUM", #endif -#ifdef SQLITE_OMIT_BETWEEN_OPTIMIZATION +#if SQLITE_OMIT_BETWEEN_OPTIMIZATION "OMIT_BETWEEN_OPTIMIZATION", #endif -#ifdef SQLITE_OMIT_BLOB_LITERAL +#if SQLITE_OMIT_BLOB_LITERAL "OMIT_BLOB_LITERAL", #endif -#ifdef SQLITE_OMIT_BTREECOUNT +#if SQLITE_OMIT_BTREECOUNT "OMIT_BTREECOUNT", #endif -#ifdef SQLITE_OMIT_BUILTIN_TEST +#if SQLITE_OMIT_BUILTIN_TEST "OMIT_BUILTIN_TEST", #endif -#ifdef SQLITE_OMIT_CAST +#if SQLITE_OMIT_CAST "OMIT_CAST", #endif -#ifdef SQLITE_OMIT_CHECK +#if SQLITE_OMIT_CHECK "OMIT_CHECK", #endif -#ifdef SQLITE_OMIT_COMPLETE +#if SQLITE_OMIT_COMPLETE "OMIT_COMPLETE", #endif -#ifdef SQLITE_OMIT_COMPOUND_SELECT +#if SQLITE_OMIT_COMPOUND_SELECT "OMIT_COMPOUND_SELECT", #endif -#ifdef SQLITE_OMIT_CTE +#if SQLITE_OMIT_CTE "OMIT_CTE", #endif -#ifdef SQLITE_OMIT_DATETIME_FUNCS +#if SQLITE_OMIT_DATETIME_FUNCS "OMIT_DATETIME_FUNCS", #endif -#ifdef SQLITE_OMIT_DECLTYPE +#if SQLITE_OMIT_DECLTYPE "OMIT_DECLTYPE", #endif -#ifdef SQLITE_OMIT_DEPRECATED +#if SQLITE_OMIT_DEPRECATED "OMIT_DEPRECATED", #endif -#ifdef SQLITE_OMIT_DISKIO +#if SQLITE_OMIT_DISKIO "OMIT_DISKIO", #endif -#ifdef SQLITE_OMIT_EXPLAIN +#if SQLITE_OMIT_EXPLAIN "OMIT_EXPLAIN", #endif -#ifdef SQLITE_OMIT_FLAG_PRAGMAS +#if SQLITE_OMIT_FLAG_PRAGMAS "OMIT_FLAG_PRAGMAS", #endif -#ifdef SQLITE_OMIT_FLOATING_POINT +#if SQLITE_OMIT_FLOATING_POINT "OMIT_FLOATING_POINT", #endif -#ifdef SQLITE_OMIT_FOREIGN_KEY +#if SQLITE_OMIT_FOREIGN_KEY "OMIT_FOREIGN_KEY", #endif -#ifdef SQLITE_OMIT_GET_TABLE +#if SQLITE_OMIT_GET_TABLE "OMIT_GET_TABLE", #endif -#ifdef SQLITE_OMIT_INCRBLOB +#if SQLITE_OMIT_INCRBLOB "OMIT_INCRBLOB", #endif -#ifdef SQLITE_OMIT_INTEGRITY_CHECK +#if SQLITE_OMIT_INTEGRITY_CHECK "OMIT_INTEGRITY_CHECK", #endif -#ifdef SQLITE_OMIT_LIKE_OPTIMIZATION +#if SQLITE_OMIT_LIKE_OPTIMIZATION "OMIT_LIKE_OPTIMIZATION", #endif -#ifdef SQLITE_OMIT_LOAD_EXTENSION +#if SQLITE_OMIT_LOAD_EXTENSION "OMIT_LOAD_EXTENSION", #endif -#ifdef SQLITE_OMIT_LOCALTIME +#if SQLITE_OMIT_LOCALTIME "OMIT_LOCALTIME", #endif -#ifdef SQLITE_OMIT_LOOKASIDE +#if SQLITE_OMIT_LOOKASIDE "OMIT_LOOKASIDE", #endif -#ifdef SQLITE_OMIT_MEMORYDB +#if SQLITE_OMIT_MEMORYDB "OMIT_MEMORYDB", #endif -#ifdef SQLITE_OMIT_OR_OPTIMIZATION +#if SQLITE_OMIT_OR_OPTIMIZATION "OMIT_OR_OPTIMIZATION", #endif -#ifdef SQLITE_OMIT_PAGER_PRAGMAS +#if SQLITE_OMIT_PAGER_PRAGMAS "OMIT_PAGER_PRAGMAS", #endif -#ifdef SQLITE_OMIT_PRAGMA +#if SQLITE_OMIT_PRAGMA "OMIT_PRAGMA", #endif -#ifdef SQLITE_OMIT_PROGRESS_CALLBACK +#if SQLITE_OMIT_PROGRESS_CALLBACK "OMIT_PROGRESS_CALLBACK", #endif -#ifdef SQLITE_OMIT_QUICKBALANCE +#if SQLITE_OMIT_QUICKBALANCE "OMIT_QUICKBALANCE", #endif -#ifdef SQLITE_OMIT_REINDEX +#if SQLITE_OMIT_REINDEX "OMIT_REINDEX", #endif -#ifdef SQLITE_OMIT_SCHEMA_PRAGMAS +#if SQLITE_OMIT_SCHEMA_PRAGMAS "OMIT_SCHEMA_PRAGMAS", #endif -#ifdef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS +#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS "OMIT_SCHEMA_VERSION_PRAGMAS", #endif -#ifdef SQLITE_OMIT_SHARED_CACHE +#if SQLITE_OMIT_SHARED_CACHE "OMIT_SHARED_CACHE", #endif -#ifdef SQLITE_OMIT_SUBQUERY +#if SQLITE_OMIT_SUBQUERY "OMIT_SUBQUERY", #endif -#ifdef SQLITE_OMIT_TCL_VARIABLE +#if SQLITE_OMIT_TCL_VARIABLE "OMIT_TCL_VARIABLE", #endif -#ifdef SQLITE_OMIT_TEMPDB +#if SQLITE_OMIT_TEMPDB "OMIT_TEMPDB", #endif -#ifdef SQLITE_OMIT_TRACE +#if SQLITE_OMIT_TRACE "OMIT_TRACE", #endif -#ifdef SQLITE_OMIT_TRIGGER +#if SQLITE_OMIT_TRIGGER "OMIT_TRIGGER", #endif -#ifdef SQLITE_OMIT_TRUNCATE_OPTIMIZATION +#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION "OMIT_TRUNCATE_OPTIMIZATION", #endif -#ifdef SQLITE_OMIT_UTF16 +#if SQLITE_OMIT_UTF16 "OMIT_UTF16", #endif -#ifdef SQLITE_OMIT_VACUUM +#if SQLITE_OMIT_VACUUM "OMIT_VACUUM", #endif -#ifdef SQLITE_OMIT_VIEW +#if SQLITE_OMIT_VIEW "OMIT_VIEW", #endif -#ifdef SQLITE_OMIT_VIRTUALTABLE +#if SQLITE_OMIT_VIRTUALTABLE "OMIT_VIRTUALTABLE", #endif -#ifdef SQLITE_OMIT_WAL +#if SQLITE_OMIT_WAL "OMIT_WAL", #endif -#ifdef SQLITE_OMIT_WSD +#if SQLITE_OMIT_WSD "OMIT_WSD", #endif -#ifdef SQLITE_OMIT_XFER_OPT +#if SQLITE_OMIT_XFER_OPT "OMIT_XFER_OPT", #endif -#ifdef SQLITE_PERFORMANCE_TRACE +#if SQLITE_PERFORMANCE_TRACE "PERFORMANCE_TRACE", #endif -#ifdef SQLITE_PROXY_DEBUG +#if SQLITE_PROXY_DEBUG "PROXY_DEBUG", #endif -#ifdef SQLITE_RTREE_INT_ONLY +#if SQLITE_RTREE_INT_ONLY "RTREE_INT_ONLY", #endif -#ifdef SQLITE_SECURE_DELETE +#if SQLITE_SECURE_DELETE "SECURE_DELETE", #endif -#ifdef SQLITE_SMALL_STACK +#if SQLITE_SMALL_STACK "SMALL_STACK", #endif -#ifdef SQLITE_SOUNDEX +#if SQLITE_SOUNDEX "SOUNDEX", #endif -#ifdef SQLITE_SYSTEM_MALLOC +#if SQLITE_SYSTEM_MALLOC "SYSTEM_MALLOC", #endif -#ifdef SQLITE_TCL +#if SQLITE_TCL "TCL", #endif #if defined(SQLITE_TEMP_STORE) && !defined(SQLITE_TEMP_STORE_xc) "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE), #endif -#ifdef SQLITE_TEST +#if SQLITE_TEST "TEST", #endif #if defined(SQLITE_THREADSAFE) "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE), #endif -#ifdef SQLITE_USE_ALLOCA +#if SQLITE_USE_ALLOCA "USE_ALLOCA", #endif -#ifdef SQLITE_WIN32_MALLOC +#if SQLITE_USER_AUTHENTICATION + "USER_AUTHENTICATION", +#endif +#if SQLITE_WIN32_MALLOC "WIN32_MALLOC", #endif -#ifdef SQLITE_ZERO_MALLOC +#if SQLITE_ZERO_MALLOC "ZERO_MALLOC" #endif }; @@ -13626,14 +14239,21 @@ */ SQLITE_API int sqlite3_compileoption_used(const char *zOptName){ int i, n; + +#if SQLITE_ENABLE_API_ARMOR + if( zOptName==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7; n = sqlite3Strlen30(zOptName); /* Since ArraySize(azCompileOpt) is normally in single digits, a ** linear search is adequate. No need for a binary search. */ for(i=0; iaDb[] (or -1) */ u8 nullRow; /* True if pointing to a row with no data */ - u8 rowidIsValid; /* True if lastRowid is valid */ u8 deferredMoveto; /* A call to sqlite3BtreeMoveto() is needed */ + Bool isEphemeral:1; /* True for an ephemeral table */ Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */ Bool isTable:1; /* True if a table requiring integer keys */ Bool isOrdered:1; /* True if the underlying table is BTREE_UNORDERED */ + Pgno pgnoRoot; /* Root page of the open btree cursor */ sqlite3_vtab_cursor *pVtabCursor; /* The cursor for a virtual table */ i64 seqCount; /* Sequence counter */ i64 movetoTarget; /* Argument to the deferred sqlite3BtreeMoveto() */ - i64 lastRowid; /* Rowid being deleted by OP_Delete */ VdbeSorter *pSorter; /* Sorter object for OP_SorterOpen cursors */ /* Cached information about the header for the data record that the @@ -13770,6 +14393,7 @@ u32 szRow; /* Byte available in aRow */ u32 iHdrOffset; /* Offset to next unparsed byte of the header */ const u8 *aRow; /* Data for the current row, if all on one page */ + u32 *aOffset; /* Pointer to aType[nField] */ u32 aType[1]; /* Type values for all entries in the record */ /* 2*nField extra array elements allocated for aType[], beyond the one ** static element declared in the structure. nField total array slots for @@ -13803,6 +14427,7 @@ Vdbe *v; /* VM this frame belongs to */ VdbeFrame *pParent; /* Parent of this frame, or NULL if parent is main */ Op *aOp; /* Program instructions for parent frame */ + i64 *anExec; /* Event counters from parent frame */ Mem *aMem; /* Array of memory cells for parent frame */ u8 *aOnceFlag; /* Array of OP_Once flags for parent frame */ VdbeCursor **apCsr; /* Array of Vdbe cursors for parent frame */ @@ -13815,7 +14440,8 @@ int nOnceFlag; /* Number of entries in aOnceFlag */ int nChildMem; /* Number of memory cells for child frame */ int nChildCsr; /* Number of cursors for child frame */ - int nChange; /* Statement changes (Vdbe.nChanges) */ + int nChange; /* Statement changes (Vdbe.nChange) */ + int nDbChange; /* Value of db->nChange */ }; #define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))]) @@ -13831,25 +14457,28 @@ ** integer etc.) of the same value. */ struct Mem { - sqlite3 *db; /* The associated database connection */ - char *z; /* String or BLOB value */ - double r; /* Real value */ - union { + union MemValue { + double r; /* Real value used when MEM_Real is set in flags */ i64 i; /* Integer value used when MEM_Int is set in flags */ int nZero; /* Used when bit MEM_Zero is set in flags */ FuncDef *pDef; /* Used only when flags==MEM_Agg */ RowSet *pRowSet; /* Used only when flags==MEM_RowSet */ VdbeFrame *pFrame; /* Used when flags==MEM_Frame */ } u; - int n; /* Number of characters in string value, excluding '\0' */ u16 flags; /* Some combination of MEM_Null, MEM_Str, MEM_Dyn, etc. */ u8 enc; /* SQLITE_UTF8, SQLITE_UTF16BE, SQLITE_UTF16LE */ + int n; /* Number of characters in string value, excluding '\0' */ + char *z; /* String or BLOB value */ + /* ShallowCopy only needs to copy the information above */ + char *zMalloc; /* Space to hold MEM_Str or MEM_Blob if szMalloc>0 */ + int szMalloc; /* Size of the zMalloc allocation */ + u32 uTemp; /* Transient storage for serial_type in OP_MakeRecord */ + sqlite3 *db; /* The associated database connection */ + void (*xDel)(void*);/* Destructor for Mem.z - only valid if MEM_Dyn */ #ifdef SQLITE_DEBUG Mem *pScopyFrom; /* This Mem is a shallow copy of pScopyFrom */ void *pFiller; /* So that sizeof(Mem) is a multiple of 8 */ #endif - void (*xDel)(void *); /* If not null, call this function to delete Mem.z */ - char *zMalloc; /* Dynamic buffer allocated by sqlite3_malloc() */ }; /* One or more of the following flags are set to indicate the validOK @@ -13908,7 +14537,7 @@ #endif /* -** Each auxilliary data pointer stored by a user defined function +** Each auxiliary data pointer stored by a user defined function ** implementation calling sqlite3_set_auxdata() is stored in an instance ** of this structure. All such structures associated with a single VM ** are stored in a linked list headed at Vdbe.pAuxData. All are destroyed @@ -13923,7 +14552,7 @@ }; /* -** The "context" argument for a installable function. A pointer to an +** The "context" argument for an installable function. A pointer to an ** instance of this structure is the first argument to the routines used ** implement the SQL functions. ** @@ -13936,14 +14565,13 @@ ** (Mem) which are only defined there. */ struct sqlite3_context { - FuncDef *pFunc; /* Pointer to function information. MUST BE FIRST */ - Mem s; /* The return value is stored here */ + Mem *pOut; /* The return value is stored here */ + FuncDef *pFunc; /* Pointer to function information */ Mem *pMem; /* Memory cell used to store aggregate context */ - CollSeq *pColl; /* Collating sequence */ Vdbe *pVdbe; /* The VM that owns this context */ int iOp; /* Instruction number of OP_Function */ int isError; /* Error code returned by the function. */ - u8 skipFlag; /* Skip skip accumulator loading if true */ + u8 skipFlag; /* Skip accumulator loading if true */ u8 fErrorOrAux; /* isError!=0 or pVdbe->pAuxData modified */ }; @@ -13964,6 +14592,16 @@ */ typedef unsigned bft; /* Bit Field Type */ +typedef struct ScanStatus ScanStatus; +struct ScanStatus { + int addrExplain; /* OP_Explain for loop */ + int addrLoop; /* Address of "loops" counter */ + int addrVisit; /* Address of "rows visited" counter */ + int iSelectID; /* The "Select-ID" for this loop */ + LogEst nEst; /* Estimated output rows per loop */ + char *zName; /* Name of table or index */ +}; + /* ** An instance of the virtual machine. This structure contains the complete ** state of the virtual machine. @@ -14028,10 +14666,6 @@ i64 nStmtDefImmCons; /* Number of def. imm constraints when stmt started */ char *zSql; /* Text of the SQL statement that generated this */ void *pFree; /* Free this when deleting the vdbe */ -#ifdef SQLITE_ENABLE_TREE_EXPLAIN - Explain *pExplain; /* The explainer */ - char *zExplain; /* Explanation of data structures */ -#endif VdbeFrame *pFrame; /* Parent frame */ VdbeFrame *pDelFrame; /* List of frame objects to free on VM reset */ int nFrame; /* Number of frames in pFrame list */ @@ -14040,6 +14674,11 @@ int nOnceFlag; /* Size of array aOnceFlag[] */ u8 *aOnceFlag; /* Flags for OP_Once */ AuxData *pAuxData; /* Linked list of auxdata allocations */ +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + i64 *anExec; /* Number of times each op has been executed */ + int nScan; /* Entries in aScan[] */ + ScanStatus *aScan; /* Scan definitions for sqlite3_stmt_scanstatus() */ +#endif }; /* @@ -14056,6 +14695,7 @@ SQLITE_PRIVATE void sqlite3VdbeFreeCursor(Vdbe *, VdbeCursor*); void sqliteVdbePopStack(Vdbe*,int); SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor*); +SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor*); #if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE*, int, Op*); #endif @@ -14066,9 +14706,8 @@ SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(Vdbe*, int, int); int sqlite2BtreeKeyCompare(BtCursor *, const void *, int, int, int *); -SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(VdbeCursor*,const UnpackedRecord*,int*); -SQLITE_PRIVATE int sqlite3VdbeIdxRowid(sqlite3*, BtCursor *, i64 *); -SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*); +SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(sqlite3*,VdbeCursor*,UnpackedRecord*,int*); +SQLITE_PRIVATE int sqlite3VdbeIdxRowid(sqlite3*, BtCursor*, i64*); SQLITE_PRIVATE int sqlite3VdbeExec(Vdbe*); SQLITE_PRIVATE int sqlite3VdbeList(Vdbe*); SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe*); @@ -14085,38 +14724,39 @@ #else SQLITE_PRIVATE void sqlite3VdbeMemSetDouble(Mem*, double); #endif +SQLITE_PRIVATE void sqlite3VdbeMemInit(Mem*,sqlite3*,u16); SQLITE_PRIVATE void sqlite3VdbeMemSetNull(Mem*); SQLITE_PRIVATE void sqlite3VdbeMemSetZeroBlob(Mem*,int); SQLITE_PRIVATE void sqlite3VdbeMemSetRowSet(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem*); -SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem*, int); +SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem*, u8, u8); SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemIntegerify(Mem*); SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem*); SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem*); +SQLITE_PRIVATE void sqlite3VdbeMemCast(Mem*,u8,u8); SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,int,Mem*); SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p); -SQLITE_PRIVATE void sqlite3VdbeMemReleaseExternal(Mem *p); #define VdbeMemDynamic(X) \ (((X)->flags&(MEM_Agg|MEM_Dyn|MEM_RowSet|MEM_Frame))!=0) -#define VdbeMemRelease(X) \ - if( VdbeMemDynamic(X) ) sqlite3VdbeMemReleaseExternal(X); SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem*, FuncDef*); SQLITE_PRIVATE const char *sqlite3OpcodeName(int); SQLITE_PRIVATE int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve); +SQLITE_PRIVATE int sqlite3VdbeMemClearAndResize(Mem *pMem, int n); SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *, int); SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame*); SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *); SQLITE_PRIVATE int sqlite3VdbeTransferError(Vdbe *p); -SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, VdbeCursor *); +SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, int, VdbeCursor *); +SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *, VdbeSorter *); SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *, VdbeCursor *); SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *, Mem *); SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *, int *); -SQLITE_PRIVATE int sqlite3VdbeSorterRewind(sqlite3 *, const VdbeCursor *, int *); -SQLITE_PRIVATE int sqlite3VdbeSorterWrite(sqlite3 *, const VdbeCursor *, Mem *); +SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *, int *); +SQLITE_PRIVATE int sqlite3VdbeSorterWrite(const VdbeCursor *, Mem *); SQLITE_PRIVATE int sqlite3VdbeSorterCompare(const VdbeCursor *, Mem *, int, int *); #if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE>0 @@ -14228,6 +14868,9 @@ if( op<0 || op>=ArraySize(wsdStat.nowValue) ){ return SQLITE_MISUSE_BKPT; } +#ifdef SQLITE_ENABLE_API_ARMOR + if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT; +#endif *pCurrent = wsdStat.nowValue[op]; *pHighwater = wsdStat.mxValue[op]; if( resetFlag ){ @@ -14247,6 +14890,11 @@ int resetFlag /* Reset high-water mark if true */ ){ int rc = SQLITE_OK; /* Return code */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || pCurrent==0|| pHighwater==0 ){ + return SQLITE_MISUSE_BKPT; + } +#endif sqlite3_mutex_enter(db->mutex); switch( op ){ case SQLITE_DBSTATUS_LOOKASIDE_USED: { @@ -14355,7 +15003,7 @@ } db->pnBytesFreed = 0; - *pHighwater = 0; + *pHighwater = 0; /* IMP: R-64479-57858 */ *pCurrent = nByte; break; @@ -14380,7 +15028,9 @@ sqlite3PagerCacheStat(pPager, op, resetFlag, &nRet); } } - *pHighwater = 0; + *pHighwater = 0; /* IMP: R-42420-56072 */ + /* IMP: R-54100-20147 */ + /* IMP: R-29431-39229 */ *pCurrent = nRet; break; } @@ -14390,7 +15040,7 @@ ** have been satisfied. The *pHighwater is always set to zero. */ case SQLITE_DBSTATUS_DEFERRED_FKS: { - *pHighwater = 0; + *pHighwater = 0; /* IMP: R-11967-56545 */ *pCurrent = db->nDeferredImmCons>0 || db->nDeferredCons>0; break; } @@ -14423,22 +15073,22 @@ ** sqlite3RegisterDateTimeFunctions() found at the bottom of the file. ** All other code has file scope. ** -** SQLite processes all times and dates as Julian Day numbers. The +** SQLite processes all times and dates as julian day numbers. The ** dates and times are stored as the number of days since noon ** in Greenwich on November 24, 4714 B.C. according to the Gregorian ** calendar system. ** ** 1970-01-01 00:00:00 is JD 2440587.5 ** 2000-01-01 00:00:00 is JD 2451544.5 ** -** This implemention requires years to be expressed as a 4-digit number +** This implementation requires years to be expressed as a 4-digit number ** which means that only dates between 0000-01-01 and 9999-12-31 can ** be represented, even though julian day numbers allow a much wider ** range of dates. ** ** The Gregorian calendar system is used for all dates and times, ** even those that predate the Gregorian calendar. Historians usually -** use the Julian calendar for dates prior to 1582-10-15 and for some +** use the julian calendar for dates prior to 1582-10-15 and for some ** dates afterwards, depending on locale. Beware of this difference. ** ** The conversion algorithms are implemented based on descriptions @@ -14710,7 +15360,7 @@ } /* -** Attempt to parse the given string into a Julian Day Number. Return +** Attempt to parse the given string into a julian day number. Return ** the number of errors. ** ** The following are acceptable forms for the input string: @@ -14818,8 +15468,9 @@ ** already, check for an MSVC build environment that provides ** localtime_s(). */ -#if !defined(HAVE_LOCALTIME_R) && !defined(HAVE_LOCALTIME_S) && \ - defined(_MSC_VER) && defined(_CRT_INSECURE_DEPRECATE) +#if !HAVE_LOCALTIME_R && !HAVE_LOCALTIME_S \ + && defined(_MSC_VER) && defined(_CRT_INSECURE_DEPRECATE) +#undef HAVE_LOCALTIME_S #define HAVE_LOCALTIME_S 1 #endif @@ -14839,8 +15490,7 @@ */ static int osLocaltime(time_t *t, struct tm *pTm){ int rc; -#if (!defined(HAVE_LOCALTIME_R) || !HAVE_LOCALTIME_R) \ - && (!defined(HAVE_LOCALTIME_S) || !HAVE_LOCALTIME_S) +#if !HAVE_LOCALTIME_R && !HAVE_LOCALTIME_S struct tm *pX; #if SQLITE_THREADSAFE>0 sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); @@ -14857,7 +15507,7 @@ #ifndef SQLITE_OMIT_BUILTIN_TEST if( sqlite3GlobalConfig.bLocaltimeFault ) return 1; #endif -#if defined(HAVE_LOCALTIME_R) && HAVE_LOCALTIME_R +#if HAVE_LOCALTIME_R rc = localtime_r(t, pTm)==0; #else rc = localtime_s(pTm, t); @@ -15281,7 +15931,7 @@ ** %f ** fractional seconds SS.SSS ** %H hour 00-24 ** %j day of year 000-366 -** %J ** Julian day number +** %J ** julian day number ** %m month 01-12 ** %M minute 00-59 ** %s seconds since 1970-01-01 @@ -15301,8 +15951,10 @@ size_t i,j; char *z; sqlite3 *db; - const char *zFmt = (const char*)sqlite3_value_text(argv[0]); + const char *zFmt; char zBuf[100]; + if( argc==0 ) return; + zFmt = (const char*)sqlite3_value_text(argv[0]); if( zFmt==0 || isDate(context, argc-1, argv+1, &x) ) return; db = sqlite3_context_db_handle(context); for(i=0, n=1; zFmt[i]; i++, n++){ @@ -15496,7 +16148,7 @@ iT = sqlite3StmtCurrentTime(context); if( iT<=0 ) return; t = iT/1000 - 10000*(sqlite3_int64)21086676; -#ifdef HAVE_GMTIME_R +#if HAVE_GMTIME_R pTm = gmtime_r(&t, &sNow); #else sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)); @@ -15906,6 +16558,10 @@ int rc = sqlite3_initialize(); if( rc ) return rc; #endif +#ifdef SQLITE_ENABLE_API_ARMOR + if( pVfs==0 ) return SQLITE_MISUSE_BKPT; +#endif + MUTEX_LOGIC( mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); ) sqlite3_mutex_enter(mutex); vfsUnlink(pVfs); @@ -16166,9 +16822,9 @@ ** The malloc.h header file is needed for malloc_usable_size() function ** on some systems (e.g. Linux). */ -#if defined(HAVE_MALLOC_H) && defined(HAVE_MALLOC_USABLE_SIZE) -# define SQLITE_USE_MALLOC_H -# define SQLITE_USE_MALLOC_USABLE_SIZE +#if HAVE_MALLOC_H && HAVE_MALLOC_USABLE_SIZE +# define SQLITE_USE_MALLOC_H 1 +# define SQLITE_USE_MALLOC_USABLE_SIZE 1 /* ** The MSVCRT has malloc_usable_size(), but it is called _msize(). The ** use of _msize() is automatic, but can be disabled by compiling with @@ -16275,7 +16931,7 @@ ** ** For this low-level interface, we know that pPrior!=0. Cases where ** pPrior==0 while have been intercepted by higher-level routine and -** redirected to xMalloc. Similarly, we know that nByte>0 becauses +** redirected to xMalloc. Similarly, we know that nByte>0 because ** cases where nByte<=0 will have been intercepted by higher-level ** routines and redirected to xFree. */ @@ -16778,7 +17434,7 @@ ** This routine is designed for use within an assert() statement, to ** verify the type of an allocation. For example: ** -** assert( sqlite3MemdebugHasType(p, MEMTYPE_DB) ); +** assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) ); */ SQLITE_PRIVATE int sqlite3MemdebugHasType(void *p, u8 eType){ int rc = 1; @@ -16800,7 +17456,7 @@ ** This routine is designed for use within an assert() statement, to ** verify the type of an allocation. For example: ** -** assert( sqlite3MemdebugNoType(p, MEMTYPE_DB) ); +** assert( sqlite3MemdebugNoType(p, MEMTYPE_LOOKASIDE) ); */ SQLITE_PRIVATE int sqlite3MemdebugNoType(void *p, u8 eType){ int rc = 1; @@ -17632,7 +18288,7 @@ ** 1. All memory allocations sizes are rounded up to a power of 2. ** ** 2. If two adjacent free blocks are the halves of a larger block, -** then the two blocks are coalesed into the single larger block. +** then the two blocks are coalesced into the single larger block. ** ** 3. New memory is allocated from the first available free block. ** @@ -17851,7 +18507,7 @@ ** block. If not, then split a block of the next larger power of ** two in order to create a new free block of size iLogsize. */ - for(iBin=iLogsize; mem5.aiFreelist[iBin]<0 && iBin<=LOGMAX; iBin++){} + for(iBin=iLogsize; iBin<=LOGMAX && mem5.aiFreelist[iBin]<0; iBin++){} if( iBin>LOGMAX ){ testcase( sqlite3GlobalConfig.xLog!=0 ); sqlite3_log(SQLITE_NOMEM, "failed to allocate %u bytes", nByte); @@ -18262,7 +18918,8 @@ */ SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int id){ #ifndef SQLITE_OMIT_AUTOINIT - if( sqlite3_initialize() ) return 0; + if( id<=SQLITE_MUTEX_RECURSIVE && sqlite3_initialize() ) return 0; + if( id>SQLITE_MUTEX_RECURSIVE && sqlite3MutexInit() ) return 0; #endif return sqlite3GlobalConfig.mutex.xMutexAlloc(id); } @@ -18443,7 +19100,7 @@ ** that means that a mutex could not be allocated. */ static sqlite3_mutex *debugMutexAlloc(int id){ - static sqlite3_debug_mutex aStatic[6]; + static sqlite3_debug_mutex aStatic[SQLITE_MUTEX_STATIC_APP3 - 1]; sqlite3_debug_mutex *pNew = 0; switch( id ){ case SQLITE_MUTEX_FAST: @@ -18640,10 +19297,13 @@ **
  • SQLITE_MUTEX_RECURSIVE **
  • SQLITE_MUTEX_STATIC_MASTER **
  • SQLITE_MUTEX_STATIC_MEM -**
  • SQLITE_MUTEX_STATIC_MEM2 +**
  • SQLITE_MUTEX_STATIC_OPEN **
  • SQLITE_MUTEX_STATIC_PRNG **
  • SQLITE_MUTEX_STATIC_LRU **
  • SQLITE_MUTEX_STATIC_PMEM +**
  • SQLITE_MUTEX_STATIC_APP1 +**
  • SQLITE_MUTEX_STATIC_APP2 +**
  • SQLITE_MUTEX_STATIC_APP3 ** ** ** The first two constants cause sqlite3_mutex_alloc() to create @@ -18677,6 +19337,9 @@ SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER, + SQLITE3_MUTEX_INITIALIZER, + SQLITE3_MUTEX_INITIALIZER, + SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER }; sqlite3_mutex *p; @@ -18713,8 +19376,12 @@ break; } default: { - assert( iType-2 >= 0 ); - assert( iType-2 < ArraySize(staticMutexes) ); +#ifdef SQLITE_ENABLE_API_ARMOR + if( iType-2<0 || iType-2>=ArraySize(staticMutexes) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif p = &staticMutexes[iType-2]; #if SQLITE_MUTEX_NREF p->id = iType; @@ -18907,12 +19574,313 @@ ** May you share freely, never taking more than you give. ** ************************************************************************* -** This file contains the C functions that implement mutexes for win32 +** This file contains the C functions that implement mutexes for Win32. */ +#if SQLITE_OS_WIN /* +** Include code that is common to all os_*.c files +*/ +/************** Include os_common.h in the middle of mutex_w32.c *************/ +/************** Begin file os_common.h ***************************************/ +/* +** 2004 May 22 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains macros and a little bit of code that is common to +** all of the platform-specific files (os_*.c) and is #included into those +** files. +** +** This file should be #included by the os_*.c files only. It is not a +** general purpose header file. +*/ +#ifndef _OS_COMMON_H_ +#define _OS_COMMON_H_ + +/* +** At least two bugs have slipped in because we changed the MEMORY_DEBUG +** macro to SQLITE_DEBUG and some older makefiles have not yet made the +** switch. The following code should catch this problem at compile-time. +*/ +#ifdef MEMORY_DEBUG +# error "The MEMORY_DEBUG macro is obsolete. Use SQLITE_DEBUG instead." +#endif + +#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG) +# ifndef SQLITE_DEBUG_OS_TRACE +# define SQLITE_DEBUG_OS_TRACE 0 +# endif + int sqlite3OSTrace = SQLITE_DEBUG_OS_TRACE; +# define OSTRACE(X) if( sqlite3OSTrace ) sqlite3DebugPrintf X +#else +# define OSTRACE(X) +#endif + +/* +** Macros for performance tracing. Normally turned off. Only works +** on i486 hardware. +*/ +#ifdef SQLITE_PERFORMANCE_TRACE + +/* +** hwtime.h contains inline assembler code for implementing +** high-performance timing routines. +*/ +/************** Include hwtime.h in the middle of os_common.h ****************/ +/************** Begin file hwtime.h ******************************************/ +/* +** 2008 May 27 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains inline asm code for retrieving "high-performance" +** counters for x86 class CPUs. +*/ +#ifndef _HWTIME_H_ +#define _HWTIME_H_ + +/* +** The following routine only works on pentium-class (or newer) processors. +** It uses the RDTSC opcode to read the cycle count value out of the +** processor and returns that value. This can be used for high-res +** profiling. +*/ +#if (defined(__GNUC__) || defined(_MSC_VER)) && \ + (defined(i386) || defined(__i386__) || defined(_M_IX86)) + + #if defined(__GNUC__) + + __inline__ sqlite_uint64 sqlite3Hwtime(void){ + unsigned int lo, hi; + __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); + return (sqlite_uint64)hi << 32 | lo; + } + + #elif defined(_MSC_VER) + + __declspec(naked) __inline sqlite_uint64 __cdecl sqlite3Hwtime(void){ + __asm { + rdtsc + ret ; return value at EDX:EAX + } + } + + #endif + +#elif (defined(__GNUC__) && defined(__x86_64__)) + + __inline__ sqlite_uint64 sqlite3Hwtime(void){ + unsigned long val; + __asm__ __volatile__ ("rdtsc" : "=A" (val)); + return val; + } + +#elif (defined(__GNUC__) && defined(__ppc__)) + + __inline__ sqlite_uint64 sqlite3Hwtime(void){ + unsigned long long retval; + unsigned long junk; + __asm__ __volatile__ ("\n\ + 1: mftbu %1\n\ + mftb %L0\n\ + mftbu %0\n\ + cmpw %0,%1\n\ + bne 1b" + : "=r" (retval), "=r" (junk)); + return retval; + } + +#else + + #error Need implementation of sqlite3Hwtime() for your platform. + + /* + ** To compile without implementing sqlite3Hwtime() for your platform, + ** you can remove the above #error and use the following + ** stub function. You will lose timing support for many + ** of the debugging and testing utilities, but it should at + ** least compile and run. + */ +SQLITE_PRIVATE sqlite_uint64 sqlite3Hwtime(void){ return ((sqlite_uint64)0); } + +#endif + +#endif /* !defined(_HWTIME_H_) */ + +/************** End of hwtime.h **********************************************/ +/************** Continuing where we left off in os_common.h ******************/ + +static sqlite_uint64 g_start; +static sqlite_uint64 g_elapsed; +#define TIMER_START g_start=sqlite3Hwtime() +#define TIMER_END g_elapsed=sqlite3Hwtime()-g_start +#define TIMER_ELAPSED g_elapsed +#else +#define TIMER_START +#define TIMER_END +#define TIMER_ELAPSED ((sqlite_uint64)0) +#endif + +/* +** If we compile with the SQLITE_TEST macro set, then the following block +** of code will give us the ability to simulate a disk I/O error. This +** is used for testing the I/O recovery logic. +*/ +#ifdef SQLITE_TEST +SQLITE_API int sqlite3_io_error_hit = 0; /* Total number of I/O Errors */ +SQLITE_API int sqlite3_io_error_hardhit = 0; /* Number of non-benign errors */ +SQLITE_API int sqlite3_io_error_pending = 0; /* Count down to first I/O error */ +SQLITE_API int sqlite3_io_error_persist = 0; /* True if I/O errors persist */ +SQLITE_API int sqlite3_io_error_benign = 0; /* True if errors are benign */ +SQLITE_API int sqlite3_diskfull_pending = 0; +SQLITE_API int sqlite3_diskfull = 0; +#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X) +#define SimulateIOError(CODE) \ + if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \ + || sqlite3_io_error_pending-- == 1 ) \ + { local_ioerr(); CODE; } +static void local_ioerr(){ + IOTRACE(("IOERR\n")); + sqlite3_io_error_hit++; + if( !sqlite3_io_error_benign ) sqlite3_io_error_hardhit++; +} +#define SimulateDiskfullError(CODE) \ + if( sqlite3_diskfull_pending ){ \ + if( sqlite3_diskfull_pending == 1 ){ \ + local_ioerr(); \ + sqlite3_diskfull = 1; \ + sqlite3_io_error_hit = 1; \ + CODE; \ + }else{ \ + sqlite3_diskfull_pending--; \ + } \ + } +#else +#define SimulateIOErrorBenign(X) +#define SimulateIOError(A) +#define SimulateDiskfullError(A) +#endif + +/* +** When testing, keep a count of the number of open files. +*/ +#ifdef SQLITE_TEST +SQLITE_API int sqlite3_open_file_count = 0; +#define OpenCounter(X) sqlite3_open_file_count+=(X) +#else +#define OpenCounter(X) +#endif + +#endif /* !defined(_OS_COMMON_H_) */ + +/************** End of os_common.h *******************************************/ +/************** Continuing where we left off in mutex_w32.c ******************/ + +/* +** Include the header file for the Windows VFS. +*/ +/************** Include os_win.h in the middle of mutex_w32.c ****************/ +/************** Begin file os_win.h ******************************************/ +/* +** 2013 November 25 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains code that is specific to Windows. +*/ +#ifndef _OS_WIN_H_ +#define _OS_WIN_H_ + +/* +** Include the primary Windows SDK header file. +*/ +#include "windows.h" + +#ifdef __CYGWIN__ +# include +# include /* amalgamator: dontcache */ +#endif + +/* +** Determine if we are dealing with Windows NT. +** +** We ought to be able to determine if we are compiling for Windows 9x or +** Windows NT using the _WIN32_WINNT macro as follows: +** +** #if defined(_WIN32_WINNT) +** # define SQLITE_OS_WINNT 1 +** #else +** # define SQLITE_OS_WINNT 0 +** #endif +** +** However, Visual Studio 2005 does not set _WIN32_WINNT by default, as +** it ought to, so the above test does not work. We'll just assume that +** everything is Windows NT unless the programmer explicitly says otherwise +** by setting SQLITE_OS_WINNT to 0. +*/ +#if SQLITE_OS_WIN && !defined(SQLITE_OS_WINNT) +# define SQLITE_OS_WINNT 1 +#endif + +/* +** Determine if we are dealing with Windows CE - which has a much reduced +** API. +*/ +#if defined(_WIN32_WCE) +# define SQLITE_OS_WINCE 1 +#else +# define SQLITE_OS_WINCE 0 +#endif + +/* +** Determine if we are dealing with WinRT, which provides only a subset of +** the full Win32 API. +*/ +#if !defined(SQLITE_OS_WINRT) +# define SQLITE_OS_WINRT 0 +#endif + +/* +** For WinCE, some API function parameters do not appear to be declared as +** volatile. +*/ +#if SQLITE_OS_WINCE +# define SQLITE_WIN32_VOLATILE +#else +# define SQLITE_WIN32_VOLATILE volatile +#endif + +#endif /* _OS_WIN_H_ */ + +/************** End of os_win.h **********************************************/ +/************** Continuing where we left off in mutex_w32.c ******************/ +#endif + +/* ** The code in this file is only used if we are compiling multithreaded -** on a win32 system. +** on a Win32 system. */ #ifdef SQLITE_MUTEX_W32 @@ -18925,50 +19893,24 @@ #ifdef SQLITE_DEBUG volatile int nRef; /* Number of enterances */ volatile DWORD owner; /* Thread holding this mutex */ - int trace; /* True to trace changes */ + volatile int trace; /* True to trace changes */ #endif }; + +/* +** These are the initializer values used when declaring a "static" mutex +** on Win32. It should be noted that all mutexes require initialization +** on the Win32 platform. +*/ #define SQLITE_W32_MUTEX_INITIALIZER { 0 } + #ifdef SQLITE_DEBUG -#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, 0L, (DWORD)0, 0 } +#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, \ + 0L, (DWORD)0, 0 } #else #define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 } #endif -/* -** Return true (non-zero) if we are running under WinNT, Win2K, WinXP, -** or WinCE. Return false (zero) for Win95, Win98, or WinME. -** -** Here is an interesting observation: Win95, Win98, and WinME lack -** the LockFileEx() API. But we can still statically link against that -** API as long as we don't call it win running Win95/98/ME. A call to -** this routine is used to determine if the host is Win95/98/ME or -** WinNT/2K/XP so that we will know whether or not we can safely call -** the LockFileEx() API. -** -** mutexIsNT() is only used for the TryEnterCriticalSection() API call, -** which is only available if your application was compiled with -** _WIN32_WINNT defined to a value >= 0x0400. Currently, the only -** call to TryEnterCriticalSection() is #ifdef'ed out, so #ifdef -** this out as well. -*/ -#if 0 -#if SQLITE_OS_WINCE || SQLITE_OS_WINRT -# define mutexIsNT() (1) -#else - static int mutexIsNT(void){ - static int osType = 0; - if( osType==0 ){ - OSVERSIONINFO sInfo; - sInfo.dwOSVersionInfoSize = sizeof(sInfo); - GetVersionEx(&sInfo); - osType = sInfo.dwPlatformId==VER_PLATFORM_WIN32_NT ? 2 : 1; - } - return osType==2; - } -#endif /* SQLITE_OS_WINCE || SQLITE_OS_WINRT */ -#endif - #ifdef SQLITE_DEBUG /* ** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are @@ -18977,38 +19919,45 @@ static int winMutexHeld(sqlite3_mutex *p){ return p->nRef!=0 && p->owner==GetCurrentThreadId(); } + static int winMutexNotheld2(sqlite3_mutex *p, DWORD tid){ return p->nRef==0 || p->owner!=tid; } + static int winMutexNotheld(sqlite3_mutex *p){ - DWORD tid = GetCurrentThreadId(); + DWORD tid = GetCurrentThreadId(); return winMutexNotheld2(p, tid); } #endif - /* ** Initialize and deinitialize the mutex subsystem. */ -static sqlite3_mutex winMutex_staticMutexes[6] = { +static sqlite3_mutex winMutex_staticMutexes[] = { SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER, + SQLITE3_MUTEX_INITIALIZER, + SQLITE3_MUTEX_INITIALIZER, + SQLITE3_MUTEX_INITIALIZER, SQLITE3_MUTEX_INITIALIZER }; + static int winMutex_isInit = 0; -/* As winMutexInit() and winMutexEnd() are called as part -** of the sqlite3_initialize and sqlite3_shutdown() -** processing, the "interlocked" magic is probably not -** strictly necessary. +static int winMutex_isNt = -1; /* <0 means "need to query" */ + +/* As the winMutexInit() and winMutexEnd() functions are called as part +** of the sqlite3_initialize() and sqlite3_shutdown() processing, the +** "interlocked" magic used here is probably not strictly necessary. */ -static LONG winMutex_lock = 0; +static LONG SQLITE_WIN32_VOLATILE winMutex_lock = 0; +SQLITE_API int sqlite3_win32_is_nt(void); /* os_win.c */ SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */ -static int winMutexInit(void){ +static int winMutexInit(void){ /* The first to increment to 1 does actual initialization */ if( InterlockedCompareExchange(&winMutex_lock, 1, 0)==0 ){ int i; @@ -19021,16 +19970,17 @@ } winMutex_isInit = 1; }else{ - /* Someone else is in the process of initing the static mutexes */ + /* Another thread is (in the process of) initializing the static + ** mutexes */ while( !winMutex_isInit ){ sqlite3_win32_sleep(1); } } - return SQLITE_OK; + return SQLITE_OK; } -static int winMutexEnd(void){ - /* The first to decrement to 0 does actual shutdown +static int winMutexEnd(void){ + /* The first to decrement to 0 does actual shutdown ** (which should be the last to shutdown.) */ if( InterlockedCompareExchange(&winMutex_lock, 0, 1)==1 ){ if( winMutex_isInit==1 ){ @@ -19041,7 +19991,7 @@ winMutex_isInit = 0; } } - return SQLITE_OK; + return SQLITE_OK; } /* @@ -19056,10 +20006,13 @@ **
  • SQLITE_MUTEX_RECURSIVE **
  • SQLITE_MUTEX_STATIC_MASTER **
  • SQLITE_MUTEX_STATIC_MEM -**
  • SQLITE_MUTEX_STATIC_MEM2 +**
  • SQLITE_MUTEX_STATIC_OPEN **
  • SQLITE_MUTEX_STATIC_PRNG **
  • SQLITE_MUTEX_STATIC_LRU **
  • SQLITE_MUTEX_STATIC_PMEM +**
  • SQLITE_MUTEX_STATIC_APP1 +**
  • SQLITE_MUTEX_STATIC_APP2 +**
  • SQLITE_MUTEX_STATIC_APP3 ** ** ** The first two constants cause sqlite3_mutex_alloc() to create @@ -19082,7 +20035,7 @@ ** ** Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST ** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc() -** returns a different mutex on every call. But for the static +** returns a different mutex on every call. But for the static ** mutex types, the same mutex is returned on every call that has ** the same type number. */ @@ -19093,10 +20046,13 @@ case SQLITE_MUTEX_FAST: case SQLITE_MUTEX_RECURSIVE: { p = sqlite3MallocZero( sizeof(*p) ); - if( p ){ + if( p ){ #ifdef SQLITE_DEBUG p->id = iType; +#ifdef SQLITE_WIN32_MUTEX_TRACE_DYNAMIC + p->trace = 1; #endif +#endif #if SQLITE_OS_WINRT InitializeCriticalSectionEx(&p->mutex, 0, 0); #else @@ -19106,13 +20062,22 @@ break; } default: { - assert( winMutex_isInit==1 ); +#ifdef SQLITE_ENABLE_API_ARMOR + if( iType-2<0 || iType-2>=ArraySize(winMutex_staticMutexes) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif assert( iType-2 >= 0 ); assert( iType-2 < ArraySize(winMutex_staticMutexes) ); + assert( winMutex_isInit==1 ); p = &winMutex_staticMutexes[iType-2]; #ifdef SQLITE_DEBUG p->id = iType; +#ifdef SQLITE_WIN32_MUTEX_TRACE_STATIC + p->trace = 1; #endif +#endif break; } } @@ -19127,8 +20092,11 @@ */ static void winMutexFree(sqlite3_mutex *p){ assert( p ); +#ifdef SQLITE_DEBUG assert( p->nRef==0 && p->owner==0 ); assert( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE ); +#endif + assert( winMutex_isInit==1 ); DeleteCriticalSection(&p->mutex); sqlite3_free(p); } @@ -19145,49 +20113,67 @@ ** more than once, the behavior is undefined. */ static void winMutexEnter(sqlite3_mutex *p){ +#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) + DWORD tid = GetCurrentThreadId(); +#endif #ifdef SQLITE_DEBUG - DWORD tid = GetCurrentThreadId(); + assert( p ); assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) ); +#else + assert( p ); #endif + assert( winMutex_isInit==1 ); EnterCriticalSection(&p->mutex); #ifdef SQLITE_DEBUG assert( p->nRef>0 || p->owner==0 ); - p->owner = tid; + p->owner = tid; p->nRef++; if( p->trace ){ - printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef); + OSTRACE(("ENTER-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n", + tid, p, p->trace, p->nRef)); } #endif } + static int winMutexTry(sqlite3_mutex *p){ -#ifndef NDEBUG - DWORD tid = GetCurrentThreadId(); +#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) + DWORD tid = GetCurrentThreadId(); #endif int rc = SQLITE_BUSY; + assert( p ); assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) ); /* ** The sqlite3_mutex_try() routine is very rarely used, and when it ** is used it is merely an optimization. So it is OK for it to always - ** fail. + ** fail. ** ** The TryEnterCriticalSection() interface is only available on WinNT. ** And some windows compilers complain if you try to use it without ** first doing some #defines that prevent SQLite from building on Win98. ** For that reason, we will omit this optimization for now. See ** ticket #2685. */ -#if 0 - if( mutexIsNT() && TryEnterCriticalSection(&p->mutex) ){ +#if defined(_WIN32_WINNT) && _WIN32_WINNT >= 0x0400 + assert( winMutex_isInit==1 ); + assert( winMutex_isNt>=-1 && winMutex_isNt<=1 ); + if( winMutex_isNt<0 ){ + winMutex_isNt = sqlite3_win32_is_nt(); + } + assert( winMutex_isNt==0 || winMutex_isNt==1 ); + if( winMutex_isNt && TryEnterCriticalSection(&p->mutex) ){ +#ifdef SQLITE_DEBUG p->owner = tid; p->nRef++; +#endif rc = SQLITE_OK; } #else UNUSED_PARAMETER(p); #endif #ifdef SQLITE_DEBUG - if( rc==SQLITE_OK && p->trace ){ - printf("try mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef); + if( p->trace ){ + OSTRACE(("TRY-MUTEX tid=%lu, mutex=%p (%d), owner=%lu, nRef=%d, rc=%s\n", + tid, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc))); } #endif return rc; @@ -19200,18 +20186,23 @@ ** is not currently allocated. SQLite will never do either. */ static void winMutexLeave(sqlite3_mutex *p){ -#ifndef NDEBUG +#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) DWORD tid = GetCurrentThreadId(); +#endif + assert( p ); +#ifdef SQLITE_DEBUG assert( p->nRef>0 ); assert( p->owner==tid ); p->nRef--; if( p->nRef==0 ) p->owner = 0; assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE ); #endif + assert( winMutex_isInit==1 ); LeaveCriticalSection(&p->mutex); #ifdef SQLITE_DEBUG if( p->trace ){ - printf("leave mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef); + OSTRACE(("LEAVE-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n", + tid, p, p->trace, p->nRef)); } #endif } @@ -19233,9 +20224,9 @@ 0 #endif }; - return &sMutex; } + #endif /* SQLITE_MUTEX_W32 */ /************** End of mutex_w32.c *******************************************/ @@ -19535,11 +20526,9 @@ ** Allocate memory. This routine is like sqlite3_malloc() except that it ** assumes the memory subsystem has already been initialized. */ -SQLITE_PRIVATE void *sqlite3Malloc(int n){ +SQLITE_PRIVATE void *sqlite3Malloc(u64 n){ void *p; - if( n<=0 /* IMP: R-65312-04917 */ - || n>=0x7fffff00 - ){ + if( n==0 || n>=0x7fffff00 ){ /* A memory allocation of a number of bytes which is near the maximum ** signed integer value might cause an integer overflow inside of the ** xMalloc(). Hence we limit the maximum size to 0x7fffff00, giving @@ -19548,12 +20537,12 @@ p = 0; }else if( sqlite3GlobalConfig.bMemstat ){ sqlite3_mutex_enter(mem0.mutex); - mallocWithAlarm(n, &p); + mallocWithAlarm((int)n, &p); sqlite3_mutex_leave(mem0.mutex); }else{ - p = sqlite3GlobalConfig.m.xMalloc(n); + p = sqlite3GlobalConfig.m.xMalloc((int)n); } - assert( EIGHT_BYTE_ALIGNMENT(p) ); /* IMP: R-04675-44850 */ + assert( EIGHT_BYTE_ALIGNMENT(p) ); /* IMP: R-11148-40995 */ return p; } @@ -19566,6 +20555,12 @@ #ifndef SQLITE_OMIT_AUTOINIT if( sqlite3_initialize() ) return 0; #endif + return n<=0 ? 0 : sqlite3Malloc(n); +} +SQLITE_API void *sqlite3_malloc64(sqlite3_uint64 n){ +#ifndef SQLITE_OMIT_AUTOINIT + if( sqlite3_initialize() ) return 0; +#endif return sqlite3Malloc(n); } @@ -19593,34 +20588,33 @@ assert( n>0 ); sqlite3_mutex_enter(mem0.mutex); + sqlite3StatusSet(SQLITE_STATUS_SCRATCH_SIZE, n); if( mem0.nScratchFree && sqlite3GlobalConfig.szScratch>=n ){ p = mem0.pScratchFree; mem0.pScratchFree = mem0.pScratchFree->pNext; mem0.nScratchFree--; sqlite3StatusAdd(SQLITE_STATUS_SCRATCH_USED, 1); - sqlite3StatusSet(SQLITE_STATUS_SCRATCH_SIZE, n); sqlite3_mutex_leave(mem0.mutex); }else{ - if( sqlite3GlobalConfig.bMemstat ){ - sqlite3StatusSet(SQLITE_STATUS_SCRATCH_SIZE, n); - n = mallocWithAlarm(n, &p); - if( p ) sqlite3StatusAdd(SQLITE_STATUS_SCRATCH_OVERFLOW, n); + sqlite3_mutex_leave(mem0.mutex); + p = sqlite3Malloc(n); + if( sqlite3GlobalConfig.bMemstat && p ){ + sqlite3_mutex_enter(mem0.mutex); + sqlite3StatusAdd(SQLITE_STATUS_SCRATCH_OVERFLOW, sqlite3MallocSize(p)); sqlite3_mutex_leave(mem0.mutex); - }else{ - sqlite3_mutex_leave(mem0.mutex); - p = sqlite3GlobalConfig.m.xMalloc(n); } sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH); } assert( sqlite3_mutex_notheld(mem0.mutex) ); #if SQLITE_THREADSAFE==0 && !defined(NDEBUG) - /* Verify that no more than two scratch allocations per thread - ** are outstanding at one time. (This is only checked in the - ** single-threaded case since checking in the multi-threaded case - ** would be much more complicated.) */ - assert( scratchAllocOut<=1 ); + /* EVIDENCE-OF: R-12970-05880 SQLite will not use more than one scratch + ** buffers per thread. + ** + ** This can only be checked in single-threaded mode. + */ + assert( scratchAllocOut==0 ); if( p ) scratchAllocOut++; #endif @@ -19686,29 +20680,37 @@ */ SQLITE_PRIVATE int sqlite3MallocSize(void *p){ assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) ); - assert( sqlite3MemdebugNoType(p, MEMTYPE_DB) ); return sqlite3GlobalConfig.m.xSize(p); } SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3 *db, void *p){ - assert( db!=0 ); - assert( sqlite3_mutex_held(db->mutex) ); - if( isLookaside(db, p) ){ - return db->lookaside.sz; + if( db==0 ){ + assert( sqlite3MemdebugNoType(p, ~MEMTYPE_HEAP) ); + assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) ); + return sqlite3MallocSize(p); }else{ - assert( sqlite3MemdebugHasType(p, MEMTYPE_DB) ); - assert( sqlite3MemdebugHasType(p, MEMTYPE_LOOKASIDE|MEMTYPE_HEAP) ); - assert( db!=0 || sqlite3MemdebugNoType(p, MEMTYPE_LOOKASIDE) ); - return sqlite3GlobalConfig.m.xSize(p); + assert( sqlite3_mutex_held(db->mutex) ); + if( isLookaside(db, p) ){ + return db->lookaside.sz; + }else{ + assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) ); + assert( sqlite3MemdebugNoType(p, ~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) ); + return sqlite3GlobalConfig.m.xSize(p); + } } } +SQLITE_API sqlite3_uint64 sqlite3_msize(void *p){ + assert( sqlite3MemdebugNoType(p, ~MEMTYPE_HEAP) ); + assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) ); + return (sqlite3_uint64)sqlite3GlobalConfig.m.xSize(p); +} /* ** Free memory previously obtained from sqlite3Malloc(). */ SQLITE_API void sqlite3_free(void *p){ if( p==0 ) return; /* IMP: R-49053-54554 */ - assert( sqlite3MemdebugNoType(p, MEMTYPE_DB) ); assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) ); + assert( sqlite3MemdebugNoType(p, ~MEMTYPE_HEAP) ); if( sqlite3GlobalConfig.bMemstat ){ sqlite3_mutex_enter(mem0.mutex); sqlite3StatusAdd(SQLITE_STATUS_MEMORY_USED, -sqlite3MallocSize(p)); @@ -19721,6 +20723,14 @@ } /* +** Add the size of memory allocation "p" to the count in +** *db->pnBytesFreed. +*/ +static SQLITE_NOINLINE void measureAllocationSize(sqlite3 *db, void *p){ + *db->pnBytesFreed += sqlite3DbMallocSize(db,p); +} + +/* ** Free memory that might be associated with a particular database ** connection. */ @@ -19729,7 +20739,7 @@ if( p==0 ) return; if( db ){ if( db->pnBytesFreed ){ - *db->pnBytesFreed += sqlite3DbMallocSize(db, p); + measureAllocationSize(db, p); return; } if( isLookaside(db, p) ){ @@ -19744,8 +20754,8 @@ return; } } - assert( sqlite3MemdebugHasType(p, MEMTYPE_DB) ); - assert( sqlite3MemdebugHasType(p, MEMTYPE_LOOKASIDE|MEMTYPE_HEAP) ); + assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) ); + assert( sqlite3MemdebugNoType(p, ~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) ); assert( db!=0 || sqlite3MemdebugNoType(p, MEMTYPE_LOOKASIDE) ); sqlite3MemdebugSetType(p, MEMTYPE_HEAP); sqlite3_free(p); @@ -19754,14 +20764,16 @@ /* ** Change the size of an existing memory allocation */ -SQLITE_PRIVATE void *sqlite3Realloc(void *pOld, int nBytes){ +SQLITE_PRIVATE void *sqlite3Realloc(void *pOld, u64 nBytes){ int nOld, nNew, nDiff; void *pNew; + assert( sqlite3MemdebugHasType(pOld, MEMTYPE_HEAP) ); + assert( sqlite3MemdebugNoType(pOld, ~MEMTYPE_HEAP) ); if( pOld==0 ){ - return sqlite3Malloc(nBytes); /* IMP: R-28354-25769 */ + return sqlite3Malloc(nBytes); /* IMP: R-04300-56712 */ } - if( nBytes<=0 ){ - sqlite3_free(pOld); /* IMP: R-31593-10574 */ + if( nBytes==0 ){ + sqlite3_free(pOld); /* IMP: R-26507-47431 */ return 0; } if( nBytes>=0x7fffff00 ){ @@ -19772,22 +20784,20 @@ /* IMPLEMENTATION-OF: R-46199-30249 SQLite guarantees that the second ** argument to xRealloc is always a value returned by a prior call to ** xRoundup. */ - nNew = sqlite3GlobalConfig.m.xRoundup(nBytes); + nNew = sqlite3GlobalConfig.m.xRoundup((int)nBytes); if( nOld==nNew ){ pNew = pOld; }else if( sqlite3GlobalConfig.bMemstat ){ sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusSet(SQLITE_STATUS_MALLOC_SIZE, nBytes); + sqlite3StatusSet(SQLITE_STATUS_MALLOC_SIZE, (int)nBytes); nDiff = nNew - nOld; if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED) >= mem0.alarmThreshold-nDiff ){ sqlite3MallocAlarm(nDiff); } - assert( sqlite3MemdebugHasType(pOld, MEMTYPE_HEAP) ); - assert( sqlite3MemdebugNoType(pOld, ~MEMTYPE_HEAP) ); pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew); if( pNew==0 && mem0.alarmCallback ){ - sqlite3MallocAlarm(nBytes); + sqlite3MallocAlarm((int)nBytes); pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew); } if( pNew ){ @@ -19798,7 +20808,7 @@ }else{ pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew); } - assert( EIGHT_BYTE_ALIGNMENT(pNew) ); /* IMP: R-04675-44850 */ + assert( EIGHT_BYTE_ALIGNMENT(pNew) ); /* IMP: R-11148-40995 */ return pNew; } @@ -19810,17 +20820,24 @@ #ifndef SQLITE_OMIT_AUTOINIT if( sqlite3_initialize() ) return 0; #endif + if( n<0 ) n = 0; /* IMP: R-26507-47431 */ return sqlite3Realloc(pOld, n); } +SQLITE_API void *sqlite3_realloc64(void *pOld, sqlite3_uint64 n){ +#ifndef SQLITE_OMIT_AUTOINIT + if( sqlite3_initialize() ) return 0; +#endif + return sqlite3Realloc(pOld, n); +} /* ** Allocate and zero memory. */ -SQLITE_PRIVATE void *sqlite3MallocZero(int n){ +SQLITE_PRIVATE void *sqlite3MallocZero(u64 n){ void *p = sqlite3Malloc(n); if( p ){ - memset(p, 0, n); + memset(p, 0, (size_t)n); } return p; } @@ -19829,10 +20846,10 @@ ** Allocate and zero memory. If the allocation fails, make ** the mallocFailed flag in the connection pointer. */ -SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3 *db, int n){ +SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3 *db, u64 n){ void *p = sqlite3DbMallocRaw(db, n); if( p ){ - memset(p, 0, n); + memset(p, 0, (size_t)n); } return p; } @@ -19855,7 +20872,7 @@ ** In other words, if a subsequent malloc (ex: "b") worked, it is assumed ** that all prior mallocs (ex: "a") worked too. */ -SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3 *db, int n){ +SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3 *db, u64 n){ void *p; assert( db==0 || sqlite3_mutex_held(db->mutex) ); assert( db==0 || db->pnBytesFreed==0 ); @@ -19890,16 +20907,16 @@ if( !p && db ){ db->mallocFailed = 1; } - sqlite3MemdebugSetType(p, MEMTYPE_DB | - ((db && db->lookaside.bEnabled) ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP)); + sqlite3MemdebugSetType(p, + (db && db->lookaside.bEnabled) ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP); return p; } /* ** Resize the block of memory pointed to by p to n bytes. If the ** resize fails, set the mallocFailed flag in the connection object. */ -SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *db, void *p, int n){ +SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *db, void *p, u64 n){ void *pNew = 0; assert( db!=0 ); assert( sqlite3_mutex_held(db->mutex) ); @@ -19917,15 +20934,14 @@ sqlite3DbFree(db, p); } }else{ - assert( sqlite3MemdebugHasType(p, MEMTYPE_DB) ); - assert( sqlite3MemdebugHasType(p, MEMTYPE_LOOKASIDE|MEMTYPE_HEAP) ); + assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) ); + assert( sqlite3MemdebugNoType(p, ~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) ); sqlite3MemdebugSetType(p, MEMTYPE_HEAP); - pNew = sqlite3_realloc(p, n); + pNew = sqlite3_realloc64(p, n); if( !pNew ){ - sqlite3MemdebugSetType(p, MEMTYPE_DB|MEMTYPE_HEAP); db->mallocFailed = 1; } - sqlite3MemdebugSetType(pNew, MEMTYPE_DB | + sqlite3MemdebugSetType(pNew, (db->lookaside.bEnabled ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP)); } } @@ -19936,7 +20952,7 @@ ** Attempt to reallocate p. If the reallocation fails, then free p ** and set the mallocFailed flag in the database connection. */ -SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *db, void *p, int n){ +SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *db, void *p, u64 n){ void *pNew; pNew = sqlite3DbRealloc(db, p, n); if( !pNew ){ @@ -19966,15 +20982,15 @@ } return zNew; } -SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3 *db, const char *z, int n){ +SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3 *db, const char *z, u64 n){ char *zNew; if( z==0 ){ return 0; } assert( (n&0x7fffffff)==n ); zNew = sqlite3DbMallocRaw(db, n+1); if( zNew ){ - memcpy(zNew, z, n); + memcpy(zNew, z, (size_t)n); zNew[n] = 0; } return zNew; @@ -19996,6 +21012,14 @@ *pz = z; } +/* +** Take actions at the end of an API call to indicate an OOM error +*/ +static SQLITE_NOINLINE int apiOomError(sqlite3 *db){ + db->mallocFailed = 0; + sqlite3Error(db, SQLITE_NOMEM); + return SQLITE_NOMEM; +} /* ** This function must be called before exiting any API function (i.e. @@ -20016,12 +21040,11 @@ ** is unsafe, as is the call to sqlite3Error(). */ assert( !db || sqlite3_mutex_held(db->mutex) ); - if( db && (db->mallocFailed || rc==SQLITE_IOERR_NOMEM) ){ - sqlite3Error(db, SQLITE_NOMEM, 0); - db->mallocFailed = 0; - rc = SQLITE_NOMEM; + if( db==0 ) return rc & 0xff; + if( db->mallocFailed || rc==SQLITE_IOERR_NOMEM ){ + return apiOomError(db); } - return rc & (db ? db->errMask : 0xff); + return rc & db->errMask; } /************** End of malloc.c **********************************************/ @@ -20162,20 +21185,6 @@ #endif /* SQLITE_OMIT_FLOATING_POINT */ /* -** Append N space characters to the given string buffer. -*/ -SQLITE_PRIVATE void sqlite3AppendSpace(StrAccum *pAccum, int N){ - static const char zSpaces[] = " "; - while( N>=(int)sizeof(zSpaces)-1 ){ - sqlite3StrAccumAppend(pAccum, zSpaces, sizeof(zSpaces)-1); - N -= sizeof(zSpaces)-1; - } - if( N>0 ){ - sqlite3StrAccumAppend(pAccum, zSpaces, N); - } -} - -/* ** Set the StrAccum object to an error mode. */ static void setStrAccumError(StrAccum *p, u8 eError){ @@ -20242,7 +21251,7 @@ const et_info *infop; /* Pointer to the appropriate info structure */ char *zOut; /* Rendering buffer */ int nOut; /* Size of the rendering buffer */ - char *zExtra; /* Malloced memory used by some conversion */ + char *zExtra = 0; /* Malloced memory used by some conversion */ #ifndef SQLITE_OMIT_FLOATING_POINT int exp, e2; /* exponent of real numbers */ int nsd; /* Number of significant digits returned */ @@ -20253,6 +21262,13 @@ PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */ char buf[etBUFSIZE]; /* Conversion buffer */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( ap==0 ){ + (void)SQLITE_MISUSE_BKPT; + sqlite3StrAccumReset(pAccum); + return; + } +#endif bufpt = 0; if( bFlags ){ if( (bArgList = (bFlags & SQLITE_PRINTF_SQLFUNC))!=0 ){ @@ -20264,12 +21280,14 @@ } for(; (c=(*fmt))!=0; ++fmt){ if( c!='%' ){ - int amt; bufpt = (char *)fmt; - amt = 1; - while( (c=(*++fmt))!='%' && c!=0 ) amt++; - sqlite3StrAccumAppend(pAccum, bufpt, amt); - if( c==0 ) break; +#if HAVE_STRCHRNUL + fmt = strchrnul(fmt, '%'); +#else + do{ fmt++; }while( *fmt && *fmt != '%' ); +#endif + sqlite3StrAccumAppend(pAccum, bufpt, (int)(fmt - bufpt)); + if( *fmt==0 ) break; } if( (c=(*++fmt))==0 ){ sqlite3StrAccumAppend(pAccum, "%", 1); @@ -20357,7 +21375,6 @@ break; } } - zExtra = 0; /* ** At this point, variables are initialized as follows: @@ -20449,10 +21466,8 @@ *(--bufpt) = zOrd[x*2]; } { - register const char *cset; /* Use registers for speed */ - register int base; - cset = &aDigits[infop->charset]; - base = infop->base; + const char *cset = &aDigits[infop->charset]; + u8 base = infop->base; do{ /* Convert to ascii */ *(--bufpt) = cset[longvalue%base]; longvalue = longvalue/base; @@ -20650,13 +21665,16 @@ }else{ c = va_arg(ap,int); } - buf[0] = (char)c; - if( precision>=0 ){ - for(idx=1; idx1 ){ + width -= precision-1; + if( width>1 && !flag_leftjustify ){ + sqlite3AppendChar(pAccum, width-1, ' '); + width = 0; + } + sqlite3AppendChar(pAccum, precision-1, c); } + length = 1; + buf[0] = c; bufpt = buf; break; case etSTRING: @@ -20756,77 +21774,112 @@ ** "length" characters long. The field width is "width". Do ** the output. */ - if( !flag_leftjustify ){ - register int nspace; - nspace = width-length; - if( nspace>0 ){ - sqlite3AppendSpace(pAccum, nspace); - } + width -= length; + if( width>0 && !flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' '); + sqlite3StrAccumAppend(pAccum, bufpt, length); + if( width>0 && flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' '); + + if( zExtra ){ + sqlite3_free(zExtra); + zExtra = 0; } - if( length>0 ){ - sqlite3StrAccumAppend(pAccum, bufpt, length); - } - if( flag_leftjustify ){ - register int nspace; - nspace = width-length; - if( nspace>0 ){ - sqlite3AppendSpace(pAccum, nspace); - } - } - if( zExtra ) sqlite3_free(zExtra); }/* End for loop over the format string */ } /* End of function */ /* -** Append N bytes of text from z to the StrAccum object. +** Enlarge the memory allocation on a StrAccum object so that it is +** able to accept at least N more bytes of text. +** +** Return the number of bytes of text that StrAccum is able to accept +** after the attempted enlargement. The value returned might be zero. */ +static int sqlite3StrAccumEnlarge(StrAccum *p, int N){ + char *zNew; + assert( p->nChar+N >= p->nAlloc ); /* Only called if really needed */ + if( p->accError ){ + testcase(p->accError==STRACCUM_TOOBIG); + testcase(p->accError==STRACCUM_NOMEM); + return 0; + } + if( !p->useMalloc ){ + N = p->nAlloc - p->nChar - 1; + setStrAccumError(p, STRACCUM_TOOBIG); + return N; + }else{ + char *zOld = (p->zText==p->zBase ? 0 : p->zText); + i64 szNew = p->nChar; + szNew += N + 1; + if( szNew+p->nChar<=p->mxAlloc ){ + /* Force exponential buffer size growth as long as it does not overflow, + ** to avoid having to call this routine too often */ + szNew += p->nChar; + } + if( szNew > p->mxAlloc ){ + sqlite3StrAccumReset(p); + setStrAccumError(p, STRACCUM_TOOBIG); + return 0; + }else{ + p->nAlloc = (int)szNew; + } + if( p->useMalloc==1 ){ + zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc); + }else{ + zNew = sqlite3_realloc(zOld, p->nAlloc); + } + if( zNew ){ + assert( p->zText!=0 || p->nChar==0 ); + if( zOld==0 && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar); + p->zText = zNew; + p->nAlloc = sqlite3DbMallocSize(p->db, zNew); + }else{ + sqlite3StrAccumReset(p); + setStrAccumError(p, STRACCUM_NOMEM); + return 0; + } + } + return N; +} + +/* +** Append N copies of character c to the given string buffer. +*/ +SQLITE_PRIVATE void sqlite3AppendChar(StrAccum *p, int N, char c){ + if( p->nChar+N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ) return; + while( (N--)>0 ) p->zText[p->nChar++] = c; +} + +/* +** The StrAccum "p" is not large enough to accept N new bytes of z[]. +** So enlarge if first, then do the append. +** +** This is a helper routine to sqlite3StrAccumAppend() that does special-case +** work (enlarging the buffer) using tail recursion, so that the +** sqlite3StrAccumAppend() routine can use fast calling semantics. +*/ +static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){ + N = sqlite3StrAccumEnlarge(p, N); + if( N>0 ){ + memcpy(&p->zText[p->nChar], z, N); + p->nChar += N; + } +} + +/* +** Append N bytes of text from z to the StrAccum object. Increase the +** size of the memory allocation for StrAccum if necessary. +*/ SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){ assert( z!=0 ); assert( p->zText!=0 || p->nChar==0 || p->accError ); assert( N>=0 ); assert( p->accError==0 || p->nAlloc==0 ); if( p->nChar+N >= p->nAlloc ){ - char *zNew; - if( p->accError ){ - testcase(p->accError==STRACCUM_TOOBIG); - testcase(p->accError==STRACCUM_NOMEM); - return; - } - if( !p->useMalloc ){ - N = p->nAlloc - p->nChar - 1; - setStrAccumError(p, STRACCUM_TOOBIG); - if( N<=0 ){ - return; - } - }else{ - char *zOld = (p->zText==p->zBase ? 0 : p->zText); - i64 szNew = p->nChar; - szNew += N + 1; - if( szNew > p->mxAlloc ){ - sqlite3StrAccumReset(p); - setStrAccumError(p, STRACCUM_TOOBIG); - return; - }else{ - p->nAlloc = (int)szNew; - } - if( p->useMalloc==1 ){ - zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc); - }else{ - zNew = sqlite3_realloc(zOld, p->nAlloc); - } - if( zNew ){ - if( zOld==0 && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar); - p->zText = zNew; - }else{ - sqlite3StrAccumReset(p); - setStrAccumError(p, STRACCUM_NOMEM); - return; - } - } + enlargeAndAppend(p,z,N); + }else{ + assert( p->zText ); + p->nChar += N; + memcpy(&p->zText[p->nChar-N], z, N); } - assert( p->zText ); - memcpy(&p->zText[p->nChar], z, N); - p->nChar += N; } /* @@ -20923,7 +21976,7 @@ /* ** Like sqlite3MPrintf(), but call sqlite3DbFree() on zStr after formatting -** the string and before returnning. This routine is intended to be used +** the string and before returning. This routine is intended to be used ** to modify an existing string. For example: ** ** x = sqlite3MPrintf(db, x, "prefix %s suffix", x); @@ -20947,6 +22000,13 @@ char *z; char zBase[SQLITE_PRINT_BUF_SIZE]; StrAccum acc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( zFormat==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif #ifndef SQLITE_OMIT_AUTOINIT if( sqlite3_initialize() ) return 0; #endif @@ -20989,6 +22049,13 @@ SQLITE_API char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){ StrAccum acc; if( n<=0 ) return zBuf; +#ifdef SQLITE_ENABLE_API_ARMOR + if( zBuf==0 || zFormat==0 ) { + (void)SQLITE_MISUSE_BKPT; + if( zBuf && n>0 ) zBuf[0] = 0; + return zBuf; + } +#endif sqlite3StrAccumInit(&acc, zBuf, n, 0); acc.useMalloc = 0; sqlite3VXPrintf(&acc, 0, zFormat, ap); @@ -21056,6 +22123,69 @@ } #endif +#ifdef SQLITE_DEBUG +/************************************************************************* +** Routines for implementing the "TreeView" display of hierarchical +** data structures for debugging. +** +** The main entry points (coded elsewhere) are: +** sqlite3TreeViewExpr(0, pExpr, 0); +** sqlite3TreeViewExprList(0, pList, 0, 0); +** sqlite3TreeViewSelect(0, pSelect, 0); +** Insert calls to those routines while debugging in order to display +** a diagram of Expr, ExprList, and Select objects. +** +*/ +/* Add a new subitem to the tree. The moreToFollow flag indicates that this +** is not the last item in the tree. */ +SQLITE_PRIVATE TreeView *sqlite3TreeViewPush(TreeView *p, u8 moreToFollow){ + if( p==0 ){ + p = sqlite3_malloc( sizeof(*p) ); + if( p==0 ) return 0; + memset(p, 0, sizeof(*p)); + }else{ + p->iLevel++; + } + assert( moreToFollow==0 || moreToFollow==1 ); + if( p->iLevelbLine) ) p->bLine[p->iLevel] = moreToFollow; + return p; +} +/* Finished with one layer of the tree */ +SQLITE_PRIVATE void sqlite3TreeViewPop(TreeView *p){ + if( p==0 ) return; + p->iLevel--; + if( p->iLevel<0 ) sqlite3_free(p); +} +/* Generate a single line of output for the tree, with a prefix that contains +** all the appropriate tree lines */ +SQLITE_PRIVATE void sqlite3TreeViewLine(TreeView *p, const char *zFormat, ...){ + va_list ap; + int i; + StrAccum acc; + char zBuf[500]; + sqlite3StrAccumInit(&acc, zBuf, sizeof(zBuf), 0); + acc.useMalloc = 0; + if( p ){ + for(i=0; iiLevel && ibLine)-1; i++){ + sqlite3StrAccumAppend(&acc, p->bLine[i] ? "| " : " ", 4); + } + sqlite3StrAccumAppend(&acc, p->bLine[i] ? "|-- " : "'-- ", 4); + } + va_start(ap, zFormat); + sqlite3VXPrintf(&acc, 0, zFormat, ap); + va_end(ap); + if( zBuf[acc.nChar-1]!='\n' ) sqlite3StrAccumAppend(&acc, "\n", 1); + sqlite3StrAccumFinish(&acc); + fprintf(stdout,"%s", zBuf); + fflush(stdout); +} +/* Shorthand for starting a new tree item that consists of a single label */ +SQLITE_PRIVATE void sqlite3TreeViewItem(TreeView *p, const char *zLabel, u8 moreToFollow){ + p = sqlite3TreeViewPush(p, moreToFollow); + sqlite3TreeViewLine(p, "%s", zLabel); +} +#endif /* SQLITE_DEBUG */ + /* ** variable-argument wrapper around sqlite3VXPrintf(). */ @@ -21117,11 +22247,19 @@ #endif #if SQLITE_THREADSAFE - sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_PRNG); - sqlite3_mutex_enter(mutex); + sqlite3_mutex *mutex; #endif - if( N<=0 ){ +#ifndef SQLITE_OMIT_AUTOINIT + if( sqlite3_initialize() ) return; +#endif + +#if SQLITE_THREADSAFE + mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_PRNG); +#endif + + sqlite3_mutex_enter(mutex); + if( N<=0 || pBuf==0 ){ wsdPrng.isInit = 0; sqlite3_mutex_leave(mutex); return; @@ -21195,6 +22333,272 @@ #endif /* SQLITE_OMIT_BUILTIN_TEST */ /************** End of random.c **********************************************/ +/************** Begin file threads.c *****************************************/ +/* +** 2012 July 21 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file presents a simple cross-platform threading interface for +** use internally by SQLite. +** +** A "thread" can be created using sqlite3ThreadCreate(). This thread +** runs independently of its creator until it is joined using +** sqlite3ThreadJoin(), at which point it terminates. +** +** Threads do not have to be real. It could be that the work of the +** "thread" is done by the main thread at either the sqlite3ThreadCreate() +** or sqlite3ThreadJoin() call. This is, in fact, what happens in +** single threaded systems. Nothing in SQLite requires multiple threads. +** This interface exists so that applications that want to take advantage +** of multiple cores can do so, while also allowing applications to stay +** single-threaded if desired. +*/ +#if SQLITE_OS_WIN +#endif + +#if SQLITE_MAX_WORKER_THREADS>0 + +/********************************* Unix Pthreads ****************************/ +#if SQLITE_OS_UNIX && defined(SQLITE_MUTEX_PTHREADS) && SQLITE_THREADSAFE>0 + +#define SQLITE_THREADS_IMPLEMENTED 1 /* Prevent the single-thread code below */ +/* #include */ + +/* A running thread */ +struct SQLiteThread { + pthread_t tid; /* Thread ID */ + int done; /* Set to true when thread finishes */ + void *pOut; /* Result returned by the thread */ + void *(*xTask)(void*); /* The thread routine */ + void *pIn; /* Argument to the thread */ +}; + +/* Create a new thread */ +SQLITE_PRIVATE int sqlite3ThreadCreate( + SQLiteThread **ppThread, /* OUT: Write the thread object here */ + void *(*xTask)(void*), /* Routine to run in a separate thread */ + void *pIn /* Argument passed into xTask() */ +){ + SQLiteThread *p; + int rc; + + assert( ppThread!=0 ); + assert( xTask!=0 ); + /* This routine is never used in single-threaded mode */ + assert( sqlite3GlobalConfig.bCoreMutex!=0 ); + + *ppThread = 0; + p = sqlite3Malloc(sizeof(*p)); + if( p==0 ) return SQLITE_NOMEM; + memset(p, 0, sizeof(*p)); + p->xTask = xTask; + p->pIn = pIn; + if( sqlite3FaultSim(200) ){ + rc = 1; + }else{ + rc = pthread_create(&p->tid, 0, xTask, pIn); + } + if( rc ){ + p->done = 1; + p->pOut = xTask(pIn); + } + *ppThread = p; + return SQLITE_OK; +} + +/* Get the results of the thread */ +SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){ + int rc; + + assert( ppOut!=0 ); + if( NEVER(p==0) ) return SQLITE_NOMEM; + if( p->done ){ + *ppOut = p->pOut; + rc = SQLITE_OK; + }else{ + rc = pthread_join(p->tid, ppOut) ? SQLITE_ERROR : SQLITE_OK; + } + sqlite3_free(p); + return rc; +} + +#endif /* SQLITE_OS_UNIX && defined(SQLITE_MUTEX_PTHREADS) */ +/******************************** End Unix Pthreads *************************/ + + +/********************************* Win32 Threads ****************************/ +#if SQLITE_OS_WIN && !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_THREADSAFE>0 + +#define SQLITE_THREADS_IMPLEMENTED 1 /* Prevent the single-thread code below */ +#include + +/* A running thread */ +struct SQLiteThread { + void *tid; /* The thread handle */ + unsigned id; /* The thread identifier */ + void *(*xTask)(void*); /* The routine to run as a thread */ + void *pIn; /* Argument to xTask */ + void *pResult; /* Result of xTask */ +}; + +/* Thread procedure Win32 compatibility shim */ +static unsigned __stdcall sqlite3ThreadProc( + void *pArg /* IN: Pointer to the SQLiteThread structure */ +){ + SQLiteThread *p = (SQLiteThread *)pArg; + + assert( p!=0 ); +#if 0 + /* + ** This assert appears to trigger spuriously on certain + ** versions of Windows, possibly due to _beginthreadex() + ** and/or CreateThread() not fully setting their thread + ** ID parameter before starting the thread. + */ + assert( p->id==GetCurrentThreadId() ); +#endif + assert( p->xTask!=0 ); + p->pResult = p->xTask(p->pIn); + + _endthreadex(0); + return 0; /* NOT REACHED */ +} + +/* Create a new thread */ +SQLITE_PRIVATE int sqlite3ThreadCreate( + SQLiteThread **ppThread, /* OUT: Write the thread object here */ + void *(*xTask)(void*), /* Routine to run in a separate thread */ + void *pIn /* Argument passed into xTask() */ +){ + SQLiteThread *p; + + assert( ppThread!=0 ); + assert( xTask!=0 ); + *ppThread = 0; + p = sqlite3Malloc(sizeof(*p)); + if( p==0 ) return SQLITE_NOMEM; + if( sqlite3GlobalConfig.bCoreMutex==0 ){ + memset(p, 0, sizeof(*p)); + }else{ + p->xTask = xTask; + p->pIn = pIn; + p->tid = (void*)_beginthreadex(0, 0, sqlite3ThreadProc, p, 0, &p->id); + if( p->tid==0 ){ + memset(p, 0, sizeof(*p)); + } + } + if( p->xTask==0 ){ + p->id = GetCurrentThreadId(); + p->pResult = xTask(pIn); + } + *ppThread = p; + return SQLITE_OK; +} + +SQLITE_PRIVATE DWORD sqlite3Win32Wait(HANDLE hObject); /* os_win.c */ + +/* Get the results of the thread */ +SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){ + DWORD rc; + BOOL bRc; + + assert( ppOut!=0 ); + if( NEVER(p==0) ) return SQLITE_NOMEM; + if( p->xTask==0 ){ + assert( p->id==GetCurrentThreadId() ); + rc = WAIT_OBJECT_0; + assert( p->tid==0 ); + }else{ + assert( p->id!=0 && p->id!=GetCurrentThreadId() ); + rc = sqlite3Win32Wait((HANDLE)p->tid); + assert( rc!=WAIT_IO_COMPLETION ); + bRc = CloseHandle((HANDLE)p->tid); + assert( bRc ); + } + if( rc==WAIT_OBJECT_0 ) *ppOut = p->pResult; + sqlite3_free(p); + return (rc==WAIT_OBJECT_0) ? SQLITE_OK : SQLITE_ERROR; +} + +#endif /* SQLITE_OS_WIN && !SQLITE_OS_WINCE && !SQLITE_OS_WINRT */ +/******************************** End Win32 Threads *************************/ + + +/********************************* Single-Threaded **************************/ +#ifndef SQLITE_THREADS_IMPLEMENTED +/* +** This implementation does not actually create a new thread. It does the +** work of the thread in the main thread, when either the thread is created +** or when it is joined +*/ + +/* A running thread */ +struct SQLiteThread { + void *(*xTask)(void*); /* The routine to run as a thread */ + void *pIn; /* Argument to xTask */ + void *pResult; /* Result of xTask */ +}; + +/* Create a new thread */ +SQLITE_PRIVATE int sqlite3ThreadCreate( + SQLiteThread **ppThread, /* OUT: Write the thread object here */ + void *(*xTask)(void*), /* Routine to run in a separate thread */ + void *pIn /* Argument passed into xTask() */ +){ + SQLiteThread *p; + + assert( ppThread!=0 ); + assert( xTask!=0 ); + *ppThread = 0; + p = sqlite3Malloc(sizeof(*p)); + if( p==0 ) return SQLITE_NOMEM; + if( (SQLITE_PTR_TO_INT(p)/17)&1 ){ + p->xTask = xTask; + p->pIn = pIn; + }else{ + p->xTask = 0; + p->pResult = xTask(pIn); + } + *ppThread = p; + return SQLITE_OK; +} + +/* Get the results of the thread */ +SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){ + + assert( ppOut!=0 ); + if( NEVER(p==0) ) return SQLITE_NOMEM; + if( p->xTask ){ + *ppOut = p->xTask(p->pIn); + }else{ + *ppOut = p->pResult; + } + sqlite3_free(p); + +#if defined(SQLITE_TEST) + { + void *pTstAlloc = sqlite3Malloc(10); + if (!pTstAlloc) return SQLITE_NOMEM; + sqlite3_free(pTstAlloc); + } +#endif + + return SQLITE_OK; +} + +#endif /* !defined(SQLITE_THREADS_IMPLEMENTED) */ +/****************************** End Single-Threaded *************************/ +#endif /* SQLITE_MAX_WORKER_THREADS>0 */ + +/************** End of threads.c *********************************************/ /************** Begin file utf.c *********************************************/ /* ** 2004 April 13 @@ -21344,8 +22748,8 @@ ** and rendered as themselves even though they are technically ** invalid characters. ** -** * This routine accepts an infinite number of different UTF8 encodings -** for unicode values 0x80 and greater. It do not change over-length +** * This routine accepts over-length UTF8 encodings +** for unicode values 0x80 and greater. It does not change over-length ** encodings to 0xfffd as some systems recommend. */ #define READ_UTF8(zIn, zTerm, c) \ @@ -21395,7 +22799,7 @@ ** desiredEnc. It is an error if the string is already of the desired ** encoding, or if *pMem does not contain a string value. */ -SQLITE_PRIVATE int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){ +SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){ int len; /* Maximum length of output string in bytes */ unsigned char *zOut; /* Output buffer */ unsigned char *zIn; /* Input iterator */ @@ -21510,12 +22914,13 @@ *z = 0; assert( (pMem->n+(desiredEnc==SQLITE_UTF8?1:2))<=len ); + c = pMem->flags; sqlite3VdbeMemRelease(pMem); - pMem->flags &= ~(MEM_Static|MEM_Dyn|MEM_Ephem); + pMem->flags = MEM_Str|MEM_Term|(c&MEM_AffMask); pMem->enc = desiredEnc; - pMem->flags |= (MEM_Term); pMem->z = (char*)zOut; pMem->zMalloc = pMem->z; + pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->z); translate_out: #if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG) @@ -21744,7 +23149,7 @@ ** */ /* #include */ -#ifdef SQLITE_HAVE_ISNAN +#if HAVE_ISNAN || SQLITE_HAVE_ISNAN # include #endif @@ -21758,6 +23163,24 @@ } #endif +/* +** Give a callback to the test harness that can be used to simulate faults +** in places where it is difficult or expensive to do so purely by means +** of inputs. +** +** The intent of the integer argument is to let the fault simulator know +** which of multiple sqlite3FaultSim() calls has been hit. +** +** Return whatever integer value the test callback returns, or return +** SQLITE_OK if no test callback is installed. +*/ +#ifndef SQLITE_OMIT_BUILTIN_TEST +SQLITE_PRIVATE int sqlite3FaultSim(int iTest){ + int (*xCallback)(int) = sqlite3GlobalConfig.xTestCallback; + return xCallback ? xCallback(iTest) : SQLITE_OK; +} +#endif + #ifndef SQLITE_OMIT_FLOATING_POINT /* ** Return true if the floating point value is Not a Number (NaN). @@ -21767,7 +23190,7 @@ */ SQLITE_PRIVATE int sqlite3IsNaN(double x){ int rc; /* The value return */ -#if !defined(SQLITE_HAVE_ISNAN) +#if !SQLITE_HAVE_ISNAN && !HAVE_ISNAN /* ** Systems that support the isnan() library function should probably ** make use of it by compiling with -DSQLITE_HAVE_ISNAN. But we have @@ -21797,9 +23220,9 @@ volatile double y = x; volatile double z = y; rc = (y!=z); -#else /* if defined(SQLITE_HAVE_ISNAN) */ +#else /* if HAVE_ISNAN */ rc = isnan(x); -#endif /* SQLITE_HAVE_ISNAN */ +#endif /* HAVE_ISNAN */ testcase( rc ); return rc; } @@ -21821,6 +23244,15 @@ } /* +** Set the current error code to err_code and clear any prior error message. +*/ +SQLITE_PRIVATE void sqlite3Error(sqlite3 *db, int err_code){ + assert( db!=0 ); + db->errCode = err_code; + if( db->pErr ) sqlite3ValueSetNull(db->pErr); +} + +/* ** Set the most recent error code and error string for the sqlite ** handle "db". The error code is set to "err_code". ** @@ -21841,18 +23273,18 @@ ** should be called with err_code set to SQLITE_OK and zFormat set ** to NULL. */ -SQLITE_PRIVATE void sqlite3Error(sqlite3 *db, int err_code, const char *zFormat, ...){ +SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3 *db, int err_code, const char *zFormat, ...){ assert( db!=0 ); db->errCode = err_code; - if( zFormat && (db->pErr || (db->pErr = sqlite3ValueNew(db))!=0) ){ + if( zFormat==0 ){ + sqlite3Error(db, err_code); + }else if( db->pErr || (db->pErr = sqlite3ValueNew(db))!=0 ){ char *z; va_list ap; va_start(ap, zFormat); z = sqlite3VMPrintf(db, zFormat, ap); va_end(ap); sqlite3ValueSetStr(db->pErr, -1, z, SQLITE_UTF8, SQLITE_DYNAMIC); - }else if( db->pErr ){ - sqlite3ValueSetNull(db->pErr); } } @@ -21866,12 +23298,12 @@ ** %T Insert a token ** %S Insert the first element of a SrcList ** -** This function should be used to report any error that occurs whilst +** This function should be used to report any error that occurs while ** compiling an SQL statement (i.e. within sqlite3_prepare()). The ** last thing the sqlite3_prepare() function does is copy the error ** stored by this function into the database handle using sqlite3Error(). -** Function sqlite3Error() should be used during statement execution -** (sqlite3_step() etc.). +** Functions sqlite3Error() or sqlite3ErrorWithMsg() should be used +** during statement execution (sqlite3_step() etc.). */ SQLITE_PRIVATE void sqlite3ErrorMsg(Parse *pParse, const char *zFormat, ...){ char *zMsg; @@ -21904,7 +23336,7 @@ ** occur. ** ** 2002-Feb-14: This routine is extended to remove MS-Access style -** brackets from around identifers. For example: "[a-b-c]" becomes +** brackets from around identifiers. For example: "[a-b-c]" becomes ** "a-b-c". */ SQLITE_PRIVATE int sqlite3Dequote(char *z){ @@ -21951,13 +23383,23 @@ */ SQLITE_API int sqlite3_stricmp(const char *zLeft, const char *zRight){ register unsigned char *a, *b; + if( zLeft==0 ){ + return zRight ? -1 : 0; + }else if( zRight==0 ){ + return 1; + } a = (unsigned char *)zLeft; b = (unsigned char *)zRight; while( *a!=0 && UpperToLower[*a]==UpperToLower[*b]){ a++; b++; } return UpperToLower[*a] - UpperToLower[*b]; } SQLITE_API int sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){ register unsigned char *a, *b; + if( zLeft==0 ){ + return zRight ? -1 : 0; + }else if( zRight==0 ){ + return 1; + } a = (unsigned char *)zLeft; b = (unsigned char *)zRight; while( N-- > 0 && *a!=0 && UpperToLower[*a]==UpperToLower[*b]){ a++; b++; } @@ -22184,9 +23626,9 @@ return c; } - /* -** Convert zNum to a 64-bit signed integer. +** Convert zNum to a 64-bit signed integer. zNum must be decimal. This +** routine does *not* accept hexadecimal notation. ** ** If the zNum value is representable as a 64-bit twos-complement ** integer, then write that value into *pNum and return 0. @@ -22275,9 +23717,43 @@ } /* +** Transform a UTF-8 integer literal, in either decimal or hexadecimal, +** into a 64-bit signed integer. This routine accepts hexadecimal literals, +** whereas sqlite3Atoi64() does not. +** +** Returns: +** +** 0 Successful transformation. Fits in a 64-bit signed integer. +** 1 Integer too large for a 64-bit signed integer or is malformed +** 2 Special case of 9223372036854775808 +*/ +SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){ +#ifndef SQLITE_OMIT_HEX_INTEGER + if( z[0]=='0' + && (z[1]=='x' || z[1]=='X') + && sqlite3Isxdigit(z[2]) + ){ + u64 u = 0; + int i, k; + for(i=2; z[i]=='0'; i++){} + for(k=i; sqlite3Isxdigit(z[k]); k++){ + u = u*16 + sqlite3HexToInt(z[k]); + } + memcpy(pOut, &u, 8); + return (z[k]==0 && k-i<=16) ? 0 : 1; + }else +#endif /* SQLITE_OMIT_HEX_INTEGER */ + { + return sqlite3Atoi64(z, pOut, sqlite3Strlen30(z), SQLITE_UTF8); + } +} + +/* ** If zNum represents an integer that will fit in 32-bits, then set ** *pValue to that integer and return true. Otherwise return false. ** +** This routine accepts both decimal and hexadecimal notation for integers. +** ** Any non-numeric characters that following zNum are ignored. ** This is different from sqlite3Atoi64() which requires the ** input number to be zero-terminated. @@ -22292,7 +23768,25 @@ }else if( zNum[0]=='+' ){ zNum++; } - while( zNum[0]=='0' ) zNum++; +#ifndef SQLITE_OMIT_HEX_INTEGER + else if( zNum[0]=='0' + && (zNum[1]=='x' || zNum[1]=='X') + && sqlite3Isxdigit(zNum[2]) + ){ + u32 u = 0; + zNum += 2; + while( zNum[0]=='0' ) zNum++; + for(i=0; sqlite3Isxdigit(zNum[i]) && i<8; i++){ + u = u*16 + sqlite3HexToInt(zNum[i]); + } + if( (u&0x80000000)==0 && sqlite3Isxdigit(zNum[i])==0 ){ + memcpy(pValue, &u, 4); + return 1; + }else{ + return 0; + } + } +#endif for(i=0; i<11 && (c = zNum[i] - '0')>=0 && c<=9; i++){ v = v*10 + c; } @@ -22356,7 +23850,7 @@ ** bit clear. Except, if we get to the 9th byte, it stores the full ** 8 bits and is the last byte. */ -SQLITE_PRIVATE int sqlite3PutVarint(unsigned char *p, u64 v){ +static int SQLITE_NOINLINE putVarint64(unsigned char *p, u64 v){ int i, j, n; u8 buf[10]; if( v & (((u64)0xff000000)<<32) ){ @@ -22380,28 +23874,17 @@ } return n; } - -/* -** This routine is a faster version of sqlite3PutVarint() that only -** works for 32-bit positive integers and which is optimized for -** the common case of small integers. A MACRO version, putVarint32, -** is provided which inlines the single-byte case. All code should use -** the MACRO version as this function assumes the single-byte case has -** already been handled. -*/ -SQLITE_PRIVATE int sqlite3PutVarint32(unsigned char *p, u32 v){ -#ifndef putVarint32 - if( (v & ~0x7f)==0 ){ - p[0] = v; +SQLITE_PRIVATE int sqlite3PutVarint(unsigned char *p, u64 v){ + if( v<=0x7f ){ + p[0] = v&0x7f; return 1; } -#endif - if( (v & ~0x3fff)==0 ){ - p[0] = (u8)((v>>7) | 0x80); - p[1] = (u8)(v & 0x7f); + if( v<=0x3fff ){ + p[0] = ((v>>7)&0x7f)|0x80; + p[1] = v&0x7f; return 2; } - return sqlite3PutVarint(p, v); + return putVarint64(p,v); } /* @@ -22973,8 +24456,8 @@ } /* -** Convert an integer into a LogEst. In other words, compute a -** good approximatation for 10*log2(x). +** Convert an integer into a LogEst. In other words, compute an +** approximation for 10*log2(x). */ SQLITE_PRIVATE LogEst sqlite3LogEst(u64 x){ static LogEst a[] = { 0, 2, 3, 5, 6, 7, 8, 9 }; @@ -23077,12 +24560,11 @@ /* ** The hashing function. */ -static unsigned int strHash(const char *z, int nKey){ +static unsigned int strHash(const char *z){ unsigned int h = 0; - assert( nKey>=0 ); - while( nKey > 0 ){ - h = (h<<3) ^ h ^ sqlite3UpperToLower[(unsigned char)*z++]; - nKey--; + unsigned char c; + while( (c = (unsigned char)*z++)!=0 ){ + h = (h<<3) ^ h ^ sqlite3UpperToLower[c]; } return h; } @@ -23154,36 +24636,41 @@ pH->htsize = new_size = sqlite3MallocSize(new_ht)/sizeof(struct _ht); memset(new_ht, 0, new_size*sizeof(struct _ht)); for(elem=pH->first, pH->first=0; elem; elem = next_elem){ - unsigned int h = strHash(elem->pKey, elem->nKey) % new_size; + unsigned int h = strHash(elem->pKey) % new_size; next_elem = elem->next; insertElement(pH, &new_ht[h], elem); } return 1; } /* This function (for internal use only) locates an element in an -** hash table that matches the given key. The hash for this key has -** already been computed and is passed as the 4th parameter. +** hash table that matches the given key. The hash for this key is +** also computed and returned in the *pH parameter. */ -static HashElem *findElementGivenHash( +static HashElem *findElementWithHash( const Hash *pH, /* The pH to be searched */ const char *pKey, /* The key we are searching for */ - int nKey, /* Bytes in key (not counting zero terminator) */ - unsigned int h /* The hash for this key. */ + unsigned int *pHash /* Write the hash value here */ ){ HashElem *elem; /* Used to loop thru the element list */ int count; /* Number of elements left to test */ + unsigned int h; /* The computed hash */ if( pH->ht ){ - struct _ht *pEntry = &pH->ht[h]; + struct _ht *pEntry; + h = strHash(pKey) % pH->htsize; + pEntry = &pH->ht[h]; elem = pEntry->chain; count = pEntry->count; }else{ + h = 0; elem = pH->first; count = pH->count; } - while( count-- && ALWAYS(elem) ){ - if( elem->nKey==nKey && sqlite3StrNICmp(elem->pKey,pKey,nKey)==0 ){ + *pHash = h; + while( count-- ){ + assert( elem!=0 ); + if( sqlite3StrICmp(elem->pKey,pKey)==0 ){ return elem; } elem = elem->next; @@ -23226,26 +24713,20 @@ } /* Attempt to locate an element of the hash table pH with a key -** that matches pKey,nKey. Return the data for this element if it is +** that matches pKey. Return the data for this element if it is ** found, or NULL if there is no match. */ -SQLITE_PRIVATE void *sqlite3HashFind(const Hash *pH, const char *pKey, int nKey){ +SQLITE_PRIVATE void *sqlite3HashFind(const Hash *pH, const char *pKey){ HashElem *elem; /* The element that matches key */ unsigned int h; /* A hash on key */ assert( pH!=0 ); assert( pKey!=0 ); - assert( nKey>=0 ); - if( pH->ht ){ - h = strHash(pKey, nKey) % pH->htsize; - }else{ - h = 0; - } - elem = findElementGivenHash(pH, pKey, nKey, h); + elem = findElementWithHash(pH, pKey, &h); return elem ? elem->data : 0; } -/* Insert an element into the hash table pH. The key is pKey,nKey +/* Insert an element into the hash table pH. The key is pKey ** and the data is "data". ** ** If no element exists with a matching key, then a new @@ -23259,49 +24740,37 @@ ** If the "data" parameter to this function is NULL, then the ** element corresponding to "key" is removed from the hash table. */ -SQLITE_PRIVATE void *sqlite3HashInsert(Hash *pH, const char *pKey, int nKey, void *data){ +SQLITE_PRIVATE void *sqlite3HashInsert(Hash *pH, const char *pKey, void *data){ unsigned int h; /* the hash of the key modulo hash table size */ HashElem *elem; /* Used to loop thru the element list */ HashElem *new_elem; /* New element added to the pH */ assert( pH!=0 ); assert( pKey!=0 ); - assert( nKey>=0 ); - if( pH->htsize ){ - h = strHash(pKey, nKey) % pH->htsize; - }else{ - h = 0; - } - elem = findElementGivenHash(pH,pKey,nKey,h); + elem = findElementWithHash(pH,pKey,&h); if( elem ){ void *old_data = elem->data; if( data==0 ){ removeElementGivenHash(pH,elem,h); }else{ elem->data = data; elem->pKey = pKey; - assert(nKey==elem->nKey); } return old_data; } if( data==0 ) return 0; new_elem = (HashElem*)sqlite3Malloc( sizeof(HashElem) ); if( new_elem==0 ) return data; new_elem->pKey = pKey; - new_elem->nKey = nKey; new_elem->data = data; pH->count++; if( pH->count>=10 && pH->count > 2*pH->htsize ){ if( rehash(pH, pH->count*2) ){ assert( pH->htsize>0 ); - h = strHash(pKey, nKey) % pH->htsize; + h = strHash(pKey) % pH->htsize; } } - if( pH->ht ){ - insertElement(pH, &pH->ht[h], new_elem); - }else{ - insertElement(pH, 0, new_elem); - } + insertElement(pH, pH->ht ? &pH->ht[h] : 0, new_elem); return 0; } @@ -23330,7 +24799,7 @@ /* 11 */ "Checkpoint" OpHelp(""), /* 12 */ "JournalMode" OpHelp(""), /* 13 */ "Vacuum" OpHelp(""), - /* 14 */ "VFilter" OpHelp("iPlan=r[P3] zPlan='P4'"), + /* 14 */ "VFilter" OpHelp("iplan=r[P3] zplan='P4'"), /* 15 */ "VUpdate" OpHelp("data=r[P3@P2]"), /* 16 */ "Goto" OpHelp(""), /* 17 */ "Gosub" OpHelp(""), @@ -23356,42 +24825,42 @@ /* 37 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"), /* 38 */ "MustBeInt" OpHelp(""), /* 39 */ "RealAffinity" OpHelp(""), - /* 40 */ "Permutation" OpHelp(""), - /* 41 */ "Compare" OpHelp(""), - /* 42 */ "Jump" OpHelp(""), - /* 43 */ "Once" OpHelp(""), - /* 44 */ "If" OpHelp(""), - /* 45 */ "IfNot" OpHelp(""), - /* 46 */ "Column" OpHelp("r[P3]=PX"), - /* 47 */ "Affinity" OpHelp("affinity(r[P1@P2])"), - /* 48 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"), - /* 49 */ "Count" OpHelp("r[P2]=count()"), - /* 50 */ "ReadCookie" OpHelp(""), - /* 51 */ "SetCookie" OpHelp(""), - /* 52 */ "OpenRead" OpHelp("root=P2 iDb=P3"), - /* 53 */ "OpenWrite" OpHelp("root=P2 iDb=P3"), - /* 54 */ "OpenAutoindex" OpHelp("nColumn=P2"), - /* 55 */ "OpenEphemeral" OpHelp("nColumn=P2"), - /* 56 */ "SorterOpen" OpHelp(""), - /* 57 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"), - /* 58 */ "Close" OpHelp(""), - /* 59 */ "SeekLT" OpHelp(""), - /* 60 */ "SeekLE" OpHelp(""), - /* 61 */ "SeekGE" OpHelp(""), - /* 62 */ "SeekGT" OpHelp(""), - /* 63 */ "Seek" OpHelp("intkey=r[P2]"), - /* 64 */ "NoConflict" OpHelp("key=r[P3@P4]"), - /* 65 */ "NotFound" OpHelp("key=r[P3@P4]"), - /* 66 */ "Found" OpHelp("key=r[P3@P4]"), - /* 67 */ "NotExists" OpHelp("intkey=r[P3]"), - /* 68 */ "Sequence" OpHelp("r[P2]=rowid"), - /* 69 */ "NewRowid" OpHelp("r[P2]=rowid"), - /* 70 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"), + /* 40 */ "Cast" OpHelp("affinity(r[P1])"), + /* 41 */ "Permutation" OpHelp(""), + /* 42 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"), + /* 43 */ "Jump" OpHelp(""), + /* 44 */ "Once" OpHelp(""), + /* 45 */ "If" OpHelp(""), + /* 46 */ "IfNot" OpHelp(""), + /* 47 */ "Column" OpHelp("r[P3]=PX"), + /* 48 */ "Affinity" OpHelp("affinity(r[P1@P2])"), + /* 49 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"), + /* 50 */ "Count" OpHelp("r[P2]=count()"), + /* 51 */ "ReadCookie" OpHelp(""), + /* 52 */ "SetCookie" OpHelp(""), + /* 53 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"), + /* 54 */ "OpenRead" OpHelp("root=P2 iDb=P3"), + /* 55 */ "OpenWrite" OpHelp("root=P2 iDb=P3"), + /* 56 */ "OpenAutoindex" OpHelp("nColumn=P2"), + /* 57 */ "OpenEphemeral" OpHelp("nColumn=P2"), + /* 58 */ "SorterOpen" OpHelp(""), + /* 59 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"), + /* 60 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"), + /* 61 */ "Close" OpHelp(""), + /* 62 */ "SeekLT" OpHelp("key=r[P3@P4]"), + /* 63 */ "SeekLE" OpHelp("key=r[P3@P4]"), + /* 64 */ "SeekGE" OpHelp("key=r[P3@P4]"), + /* 65 */ "SeekGT" OpHelp("key=r[P3@P4]"), + /* 66 */ "Seek" OpHelp("intkey=r[P2]"), + /* 67 */ "NoConflict" OpHelp("key=r[P3@P4]"), + /* 68 */ "NotFound" OpHelp("key=r[P3@P4]"), + /* 69 */ "Found" OpHelp("key=r[P3@P4]"), + /* 70 */ "NotExists" OpHelp("intkey=r[P3]"), /* 71 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"), /* 72 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"), - /* 73 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"), - /* 74 */ "Delete" OpHelp(""), - /* 75 */ "ResetCount" OpHelp(""), + /* 73 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"), + /* 74 */ "NewRowid" OpHelp("r[P2]=rowid"), + /* 75 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"), /* 76 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"), /* 77 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"), /* 78 */ "Ne" OpHelp("if r[P1]!=r[P3] goto P2"), @@ -23400,7 +24869,7 @@ /* 81 */ "Le" OpHelp("if r[P1]<=r[P3] goto P2"), /* 82 */ "Lt" OpHelp("if r[P1]=r[P3] goto P2"), - /* 84 */ "SorterCompare" OpHelp("if key(P1)!=rtrim(r[P3],P4) goto P2"), + /* 84 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"), /* 85 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"), /* 86 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"), /* 87 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<0 goto P2"), + /* 98 */ "ResetCount" OpHelp(""), + /* 99 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"), + /* 100 */ "SorterData" OpHelp("r[P2]=data"), + /* 101 */ "RowKey" OpHelp("r[P2]=key"), + /* 102 */ "RowData" OpHelp("r[P2]=data"), + /* 103 */ "Rowid" OpHelp("r[P2]=rowid"), + /* 104 */ "NullRow" OpHelp(""), + /* 105 */ "Last" OpHelp(""), + /* 106 */ "SorterSort" OpHelp(""), + /* 107 */ "Sort" OpHelp(""), + /* 108 */ "Rewind" OpHelp(""), + /* 109 */ "SorterInsert" OpHelp(""), + /* 110 */ "IdxInsert" OpHelp("key=r[P2]"), + /* 111 */ "IdxDelete" OpHelp("key=r[P2@P3]"), + /* 112 */ "IdxRowid" OpHelp("r[P2]=rowid"), + /* 113 */ "IdxLE" OpHelp("key=r[P3@P4]"), + /* 114 */ "IdxGT" OpHelp("key=r[P3@P4]"), + /* 115 */ "IdxLT" OpHelp("key=r[P3@P4]"), + /* 116 */ "IdxGE" OpHelp("key=r[P3@P4]"), + /* 117 */ "Destroy" OpHelp(""), + /* 118 */ "Clear" OpHelp(""), + /* 119 */ "ResetSorter" OpHelp(""), + /* 120 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"), + /* 121 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"), + /* 122 */ "ParseSchema" OpHelp(""), + /* 123 */ "LoadAnalysis" OpHelp(""), + /* 124 */ "DropTable" OpHelp(""), + /* 125 */ "DropIndex" OpHelp(""), + /* 126 */ "DropTrigger" OpHelp(""), + /* 127 */ "IntegrityCk" OpHelp(""), + /* 128 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), + /* 129 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"), + /* 130 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"), + /* 131 */ "Program" OpHelp(""), + /* 132 */ "Param" OpHelp(""), /* 133 */ "Real" OpHelp("r[P2]=P4"), - /* 134 */ "IfNeg" OpHelp("if r[P1]<0 goto P2"), - /* 135 */ "IfZero" OpHelp("r[P1]+=P3, if r[P1]==0 goto P2"), - /* 136 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), - /* 137 */ "IncrVacuum" OpHelp(""), - /* 138 */ "Expire" OpHelp(""), - /* 139 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), - /* 140 */ "VBegin" OpHelp(""), - /* 141 */ "VCreate" OpHelp(""), - /* 142 */ "VDestroy" OpHelp(""), - /* 143 */ "ToText" OpHelp(""), - /* 144 */ "ToBlob" OpHelp(""), - /* 145 */ "ToNumeric" OpHelp(""), - /* 146 */ "ToInt" OpHelp(""), - /* 147 */ "ToReal" OpHelp(""), - /* 148 */ "VOpen" OpHelp(""), - /* 149 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), - /* 150 */ "VNext" OpHelp(""), - /* 151 */ "VRename" OpHelp(""), - /* 152 */ "Pagecount" OpHelp(""), - /* 153 */ "MaxPgcnt" OpHelp(""), - /* 154 */ "Init" OpHelp("Start at P2"), - /* 155 */ "Noop" OpHelp(""), - /* 156 */ "Explain" OpHelp(""), + /* 134 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), + /* 135 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"), + /* 136 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), + /* 137 */ "IfPos" OpHelp("if r[P1]>0 goto P2"), + /* 138 */ "IfNeg" OpHelp("r[P1]+=P3, if r[P1]<0 goto P2"), + /* 139 */ "IfZero" OpHelp("r[P1]+=P3, if r[P1]==0 goto P2"), + /* 140 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), + /* 141 */ "IncrVacuum" OpHelp(""), + /* 142 */ "Expire" OpHelp(""), + /* 143 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), + /* 144 */ "VBegin" OpHelp(""), + /* 145 */ "VCreate" OpHelp(""), + /* 146 */ "VDestroy" OpHelp(""), + /* 147 */ "VOpen" OpHelp(""), + /* 148 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), + /* 149 */ "VNext" OpHelp(""), + /* 150 */ "VRename" OpHelp(""), + /* 151 */ "Pagecount" OpHelp(""), + /* 152 */ "MaxPgcnt" OpHelp(""), + /* 153 */ "Init" OpHelp("Start at P2"), + /* 154 */ "Noop" OpHelp(""), + /* 155 */ "Explain" OpHelp(""), }; return azName[i]; } @@ -23575,11 +25043,10 @@ #include #include #if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 -#include +# include #endif - -#if SQLITE_ENABLE_LOCKING_STYLE +#if SQLITE_ENABLE_LOCKING_STYLE || OS_VXWORKS # include # if OS_VXWORKS # include @@ -23990,6 +25457,14 @@ #endif /* +** Explicitly call the 64-bit version of lseek() on Android. Otherwise, lseek() +** is the 32-bit version, even if _FILE_OFFSET_BITS=64 is defined. +*/ +#ifdef __ANDROID__ +# define lseek lseek64 +#endif + +/* ** Different Unix systems declare open() in different ways. Same use ** open(const char*,int,mode_t). Others use open(const char*,int,...). ** The difference is important when using a pointer to the function. @@ -24007,11 +25482,16 @@ ** we are not running as root. */ static int posixFchown(int fd, uid_t uid, gid_t gid){ +#if OS_VXWORKS + return 0; +#else return geteuid() ? 0 : fchown(fd,uid,gid); +#endif } /* Forward reference */ static int openDirectory(const char*, int*); +static int unixGetpagesize(void); /* ** Many system calls are accessed through pointer-to-functions so that @@ -24062,7 +25542,7 @@ { "read", (sqlite3_syscall_ptr)read, 0 }, #define osRead ((ssize_t(*)(int,void*,size_t))aSyscall[8].pCurrent) -#if defined(USE_PREAD) || SQLITE_ENABLE_LOCKING_STYLE +#if defined(USE_PREAD) || (SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS) { "pread", (sqlite3_syscall_ptr)pread, 0 }, #else { "pread", (sqlite3_syscall_ptr)0, 0 }, @@ -24079,7 +25559,7 @@ { "write", (sqlite3_syscall_ptr)write, 0 }, #define osWrite ((ssize_t(*)(int,const void*,size_t))aSyscall[11].pCurrent) -#if defined(USE_PREAD) || SQLITE_ENABLE_LOCKING_STYLE +#if defined(USE_PREAD) || (SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS) { "pwrite", (sqlite3_syscall_ptr)pwrite, 0 }, #else { "pwrite", (sqlite3_syscall_ptr)0, 0 }, @@ -24133,6 +25613,9 @@ { "mremap", (sqlite3_syscall_ptr)0, 0 }, #endif #define osMremap ((void*(*)(void*,size_t,size_t,int,...))aSyscall[23].pCurrent) + { "getpagesize", (sqlite3_syscall_ptr)unixGetpagesize, 0 }, +#define osGetpagesize ((int(*)(void))aSyscall[24].pCurrent) + #endif }; /* End of the overrideable system calls */ @@ -24313,7 +25796,7 @@ #if defined(SQLITE_TEST) && defined(SQLITE_DEBUG) /* ** Helper function for printing out trace information from debugging -** binaries. This returns the string represetation of the supplied +** binaries. This returns the string representation of the supplied ** integer lock-type. */ static const char *azFileLock(int eFileLock){ @@ -24390,9 +25873,22 @@ /* ** Retry ftruncate() calls that fail due to EINTR +** +** All calls to ftruncate() within this file should be made through this wrapper. +** On the Android platform, bypassing the logic below could lead to a corrupt +** database. */ static int robust_ftruncate(int h, sqlite3_int64 sz){ int rc; +#ifdef __ANDROID__ + /* On Android, ftruncate() always uses 32-bit offsets, even if + ** _FILE_OFFSET_BITS=64 is defined. This means it is unsafe to attempt to + ** truncate a file to any size larger than 2GiB. Silently ignore any + ** such attempts. */ + if( sz>(sqlite3_int64)0x7FFFFFFF ){ + rc = SQLITE_OK; + }else +#endif do{ rc = osFtruncate(h,sz); }while( rc<0 && errno==EINTR ); return rc; } @@ -24446,16 +25942,6 @@ case EPERM: return SQLITE_PERM; - /* EDEADLK is only possible if a call to fcntl(F_SETLKW) is made. And - ** this module never makes such a call. And the code in SQLite itself - ** asserts that SQLITE_IOERR_BLOCKED is never returned. For these reasons - ** this case is also commented out. If the system does set errno to EDEADLK, - ** the default SQLITE_IOERR_XXX code will be returned. */ -#if 0 - case EDEADLK: - return SQLITE_IOERR_BLOCKED; -#endif - #if EOPNOTSUPP!=ENOTSUP case EOPNOTSUPP: /* something went terribly awry, unless during file system support @@ -24988,9 +26474,13 @@ ** Return TRUE if pFile has been renamed or unlinked since it was first opened. */ static int fileHasMoved(unixFile *pFile){ +#if OS_VXWORKS + return pFile->pInode!=0 && pFile->pId!=pFile->pInode->fileId.pId; +#else struct stat buf; return pFile->pInode!=0 && - (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino); + (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino); +#endif } @@ -25604,6 +27094,13 @@ pFile->pId = 0; } #endif +#ifdef SQLITE_UNLINK_AFTER_CLOSE + if( pFile->ctrlFlags & UNIXFILE_DELETE ){ + osUnlink(pFile->zPath); + sqlite3_free(*(char**)&pFile->zPath); + pFile->zPath = 0; + } +#endif OSTRACE(("CLOSE %-3d\n", pFile->h)); OpenCounter(-1); sqlite3_free(pFile->pUnused); @@ -26126,7 +27623,6 @@ /* Otherwise see if some other process holds it. */ if( !reserved ){ sem_t *pSem = pFile->pInode->pSem; - struct stat statBuf; if( sem_trywait(pSem)==-1 ){ int tErrno = errno; @@ -26179,7 +27675,6 @@ */ static int semLock(sqlite3_file *id, int eFileLock) { unixFile *pFile = (unixFile*)id; - int fd; sem_t *pSem = pFile->pInode->pSem; int rc = SQLITE_OK; @@ -26781,7 +28276,7 @@ ** NB: If you define USE_PREAD or USE_PREAD64, then it might also ** be necessary to define _XOPEN_SOURCE to be 500. This varies from ** one system to another. Since SQLite does not define USE_PREAD -** any any form by default, we will not attempt to define _XOPEN_SOURCE. +** in any form by default, we will not attempt to define _XOPEN_SOURCE. ** See tickets #2741 and #2681. ** ** To avoid stomping the errno value on a failed read the lastErrno value @@ -27048,9 +28543,9 @@ ** We do not trust systems to provide a working fdatasync(). Some do. ** Others do no. To be safe, we will stick with the (slightly slower) ** fsync(). If you know that your system does support fdatasync() correctly, -** then simply compile with -Dfdatasync=fdatasync +** then simply compile with -Dfdatasync=fdatasync or -DHAVE_FDATASYNC */ -#if !defined(fdatasync) +#if !defined(fdatasync) && !HAVE_FDATASYNC # define fdatasync fsync #endif @@ -27278,7 +28773,7 @@ nByte = ((nByte + pFile->szChunk - 1)/pFile->szChunk) * pFile->szChunk; } - rc = robust_ftruncate(pFile->h, (off_t)nByte); + rc = robust_ftruncate(pFile->h, nByte); if( rc ){ pFile->lastErrno = errno; return unixLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath); @@ -27371,25 +28866,29 @@ }while( err==EINTR ); if( err ) return SQLITE_IOERR_WRITE; #else - /* If the OS does not have posix_fallocate(), fake it. First use - ** ftruncate() to set the file size, then write a single byte to - ** the last byte in each block within the extended region. This - ** is the same technique used by glibc to implement posix_fallocate() - ** on systems that do not have a real fallocate() system call. + /* If the OS does not have posix_fallocate(), fake it. Write a + ** single byte to the last byte in each block that falls entirely + ** within the extended region. Then, if required, a single byte + ** at offset (nSize-1), to set the size of the file correctly. + ** This is a similar technique to that used by glibc on systems + ** that do not have a real fallocate() call. */ int nBlk = buf.st_blksize; /* File-system block size */ + int nWrite = 0; /* Number of bytes written by seekAndWrite */ i64 iWrite; /* Next offset to write to */ - if( robust_ftruncate(pFile->h, nSize) ){ - pFile->lastErrno = errno; - return unixLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath); - } iWrite = ((buf.st_size + 2*nBlk - 1)/nBlk)*nBlk-1; - while( iWrite=buf.st_size ); + assert( (iWrite/nBlk)==((buf.st_size+nBlk-1)/nBlk) ); + assert( ((iWrite+1)%nBlk)==0 ); + for(/*no-op*/; iWritectrlFlags is set. ** ** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags. @@ -27620,7 +29119,7 @@ ** Return the device characteristics for the file. ** ** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default. -** However, that choice is contraversial since technically the underlying +** However, that choice is controversial since technically the underlying ** file system does not always provide powersafe overwrites. (In other ** words, after a power-loss event, parts of the file that were never ** written might end up being altered.) However, non-PSOW behavior is very, @@ -27642,9 +29141,26 @@ return rc; } -#ifndef SQLITE_OMIT_WAL +#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 +/* +** Return the system page size. +** +** This function should not be called directly by other code in this file. +** Instead, it should be called via macro osGetpagesize(). +*/ +static int unixGetpagesize(void){ +#if defined(_BSD_SOURCE) + return getpagesize(); +#else + return (int)sysconf(_SC_PAGESIZE); +#endif +} +#endif /* !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 */ + +#ifndef SQLITE_OMIT_WAL + /* ** Object used to represent an shared memory buffer. ** @@ -27794,6 +29310,22 @@ return rc; } +/* +** Return the minimum number of 32KB shm regions that should be mapped at +** a time, assuming that each mapping must be an integer multiple of the +** current system page-size. +** +** Usually, this is 1. The exception seems to be systems that are configured +** to use 64KB pages - in this case each mapping must cover at least two +** shm regions. +*/ +static int unixShmRegionPerMap(void){ + int shmsz = 32*1024; /* SHM region size */ + int pgsz = osGetpagesize(); /* System page size */ + assert( ((pgsz-1)&pgsz)==0 ); /* Page size must be a power of 2 */ + if( pgszpInode->pShmNode; assert( unixMutexHeld() ); if( p && p->nRef==0 ){ + int nShmPerMap = unixShmRegionPerMap(); int i; assert( p->pInode==pFd->pInode ); sqlite3_mutex_free(p->mutex); - for(i=0; inRegion; i++){ + for(i=0; inRegion; i+=nShmPerMap){ if( p->h>=0 ){ osMunmap(p->apRegion[i], p->szRegion); }else{ @@ -28015,6 +29548,8 @@ unixShm *p; unixShmNode *pShmNode; int rc = SQLITE_OK; + int nShmPerMap = unixShmRegionPerMap(); + int nReqRegion; /* If the shared-memory file has not yet been opened, open it now. */ if( pDbFd->pShm==0 ){ @@ -28030,9 +29565,12 @@ assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 ); assert( pShmNode->h<0 || pDbFd->pInode->bProcessLock==0 ); - if( pShmNode->nRegion<=iRegion ){ + /* Minimum number of regions required to be mapped. */ + nReqRegion = ((iRegion+nShmPerMap) / nShmPerMap) * nShmPerMap; + + if( pShmNode->nRegionszRegion = szRegion; @@ -28081,17 +29619,19 @@ /* Map the requested memory region into this processes address space. */ apNew = (char **)sqlite3_realloc( - pShmNode->apRegion, (iRegion+1)*sizeof(char *) + pShmNode->apRegion, nReqRegion*sizeof(char *) ); if( !apNew ){ rc = SQLITE_IOERR_NOMEM; goto shmpage_out; } pShmNode->apRegion = apNew; - while(pShmNode->nRegion<=iRegion){ + while( pShmNode->nRegionh>=0 ){ - pMem = osMmap(0, szRegion, + pMem = osMmap(0, nMap, pShmNode->isReadonly ? PROT_READ : PROT_READ|PROT_WRITE, MAP_SHARED, pShmNode->h, szRegion*(i64)pShmNode->nRegion ); @@ -28107,8 +29647,11 @@ } memset(pMem, 0, szRegion); } - pShmNode->apRegion[pShmNode->nRegion] = pMem; - pShmNode->nRegion++; + + for(i=0; iapRegion[pShmNode->nRegion+i] = &((char*)pMem)[szRegion*i]; + } + pShmNode->nRegion += nShmPerMap; } } @@ -28323,19 +29866,6 @@ } /* -** Return the system page size. -*/ -static int unixGetPagesize(void){ -#if HAVE_MREMAP - return 512; -#elif defined(_BSD_SOURCE) - return getpagesize(); -#else - return (int)sysconf(_SC_PAGESIZE); -#endif -} - -/* ** Attempt to set the size of the memory mapping maintained by file ** descriptor pFd to nNew bytes. Any existing mapping is discarded. ** @@ -28371,8 +29901,12 @@ if( (pFd->ctrlFlags & UNIXFILE_RDONLY)==0 ) flags |= PROT_WRITE; if( pOrig ){ - const int szSyspage = unixGetPagesize(); +#if HAVE_MREMAP + i64 nReuse = pFd->mmapSize; +#else + const int szSyspage = osGetpagesize(); i64 nReuse = (pFd->mmapSize & ~(szSyspage-1)); +#endif u8 *pReq = &pOrig[nReuse]; /* Unmap any pages of the existing mapping that cannot be reused. */ @@ -28557,7 +30091,7 @@ ** looks at the filesystem type and tries to guess the best locking ** strategy from that. ** -** For finder-funtion F, two objects are created: +** For finder-function F, two objects are created: ** ** (1) The real finder-function named "FImpt()". ** @@ -28578,7 +30112,7 @@ ** * An I/O method finder function called FINDER that returns a pointer ** to the METHOD object in the previous bullet. */ -#define IOMETHODS(FINDER, METHOD, VERSION, CLOSE, LOCK, UNLOCK, CKLOCK) \ +#define IOMETHODS(FINDER, METHOD, VERSION, CLOSE, LOCK, UNLOCK, CKLOCK, SHMMAP) \ static const sqlite3_io_methods METHOD = { \ VERSION, /* iVersion */ \ CLOSE, /* xClose */ \ @@ -28593,7 +30127,7 @@ unixFileControl, /* xFileControl */ \ unixSectorSize, /* xSectorSize */ \ unixDeviceCharacteristics, /* xDeviceCapabilities */ \ - unixShmMap, /* xShmMap */ \ + SHMMAP, /* xShmMap */ \ unixShmLock, /* xShmLock */ \ unixShmBarrier, /* xShmBarrier */ \ unixShmUnmap, /* xShmUnmap */ \ @@ -28619,16 +30153,18 @@ unixClose, /* xClose method */ unixLock, /* xLock method */ unixUnlock, /* xUnlock method */ - unixCheckReservedLock /* xCheckReservedLock method */ + unixCheckReservedLock, /* xCheckReservedLock method */ + unixShmMap /* xShmMap method */ ) IOMETHODS( nolockIoFinder, /* Finder function name */ nolockIoMethods, /* sqlite3_io_methods object name */ - 1, /* shared memory is disabled */ + 3, /* shared memory is disabled */ nolockClose, /* xClose method */ nolockLock, /* xLock method */ nolockUnlock, /* xUnlock method */ - nolockCheckReservedLock /* xCheckReservedLock method */ + nolockCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) IOMETHODS( dotlockIoFinder, /* Finder function name */ @@ -28637,7 +30173,8 @@ dotlockClose, /* xClose method */ dotlockLock, /* xLock method */ dotlockUnlock, /* xUnlock method */ - dotlockCheckReservedLock /* xCheckReservedLock method */ + dotlockCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) #if SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS @@ -28648,7 +30185,8 @@ flockClose, /* xClose method */ flockLock, /* xLock method */ flockUnlock, /* xUnlock method */ - flockCheckReservedLock /* xCheckReservedLock method */ + flockCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) #endif @@ -28660,7 +30198,8 @@ semClose, /* xClose method */ semLock, /* xLock method */ semUnlock, /* xUnlock method */ - semCheckReservedLock /* xCheckReservedLock method */ + semCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) #endif @@ -28672,7 +30211,8 @@ afpClose, /* xClose method */ afpLock, /* xLock method */ afpUnlock, /* xUnlock method */ - afpCheckReservedLock /* xCheckReservedLock method */ + afpCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) #endif @@ -28697,7 +30237,8 @@ proxyClose, /* xClose method */ proxyLock, /* xLock method */ proxyUnlock, /* xUnlock method */ - proxyCheckReservedLock /* xCheckReservedLock method */ + proxyCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) #endif @@ -28710,7 +30251,8 @@ unixClose, /* xClose method */ unixLock, /* xLock method */ nfsUnlock, /* xUnlock method */ - unixCheckReservedLock /* xCheckReservedLock method */ + unixCheckReservedLock, /* xCheckReservedLock method */ + 0 /* xShmMap method */ ) #endif @@ -28819,7 +30361,7 @@ #endif /* OS_VXWORKS && SQLITE_ENABLE_LOCKING_STYLE */ /* -** An abstract type for a pointer to a IO method finder function: +** An abstract type for a pointer to an IO method finder function: */ typedef const sqlite3_io_methods *(*finder_type)(const char*,unixFile*); @@ -29133,7 +30675,7 @@ ** descriptor on the same path, fail, and return an error to SQLite. ** ** Even if a subsequent open() call does succeed, the consequences of - ** not searching for a resusable file descriptor are not dire. */ + ** not searching for a reusable file descriptor are not dire. */ if( 0==osStat(zPath, &sStat) ){ unixInodeInfo *pInode; @@ -29164,7 +30706,7 @@ ** written to *pMode. If an IO error occurs, an SQLite error code is ** returned and the value of *pMode is not modified. ** -** In most cases cases, this routine sets *pMode to 0, which will become +** In most cases, this routine sets *pMode to 0, which will become ** an indication to robust_open() to create the file using ** SQLITE_DEFAULT_FILE_PERMISSIONS adjusted by the umask. ** But if the file being opened is a WAL or regular journal file, then @@ -29425,6 +30967,12 @@ if( isDelete ){ #if OS_VXWORKS zPath = zName; +#elif defined(SQLITE_UNLINK_AFTER_CLOSE) + zPath = sqlite3_mprintf("%s", zName); + if( zPath==0 ){ + robust_close(p, fd, __LINE__); + return SQLITE_NOMEM; + } #else osUnlink(zName); #endif @@ -29525,7 +31073,11 @@ UNUSED_PARAMETER(NotUsed); SimulateIOError(return SQLITE_IOERR_DELETE); if( osUnlink(zPath)==(-1) ){ - if( errno==ENOENT ){ + if( errno==ENOENT +#if OS_VXWORKS + || osAccess(zPath,0)!=0 +#endif + ){ rc = SQLITE_IOERR_DELETE_NOENT; }else{ rc = unixLogError(SQLITE_IOERR_DELETE, "unlink", zPath); @@ -29946,7 +31498,7 @@ ** proxy path against the values stored in the conch. The conch file is ** stored in the same directory as the database file and the file name ** is patterned after the database file name as ".-conch". -** If the conch file does not exist, or it's contents do not match the +** If the conch file does not exist, or its contents do not match the ** host ID and/or proxy path, then the lock is escalated to an exclusive ** lock and the conch file contents is updated with the host ID and proxy ** path and the lock is downgraded to a shared lock again. If the conch @@ -29998,7 +31550,7 @@ ** setting the environment variable SQLITE_FORCE_PROXY_LOCKING to 1 will ** force proxy locking to be used for every database file opened, and 0 ** will force automatic proxy locking to be disabled for all database -** files (explicity calling the SQLITE_SET_LOCKPROXYFILE pragma or +** files (explicitly calling the SQLITE_SET_LOCKPROXYFILE pragma or ** sqlite_file_control API is not affected by SQLITE_FORCE_PROXY_LOCKING). */ @@ -31118,7 +32670,7 @@ /* Double-check that the aSyscall[] array has been constructed ** correctly. See ticket [bb3a86e890c8e96ab] */ - assert( ArraySize(aSyscall)==24 ); + assert( ArraySize(aSyscall)==25 ); /* Register all VFSes defined in the aVfs[] array */ for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){ @@ -31158,11 +32710,6 @@ */ #if SQLITE_OS_WIN /* This file is used for Windows only */ -#ifdef __CYGWIN__ -# include -# include /* amalgamator: keep */ -#endif - /* ** Include code that is common to all os_*.c files */ @@ -31377,6 +32924,10 @@ /************** Continuing where we left off in os_win.c *********************/ /* +** Include the header file for the Windows VFS. +*/ + +/* ** Compiling and using WAL mode requires several APIs that are only ** available in Windows platforms based on the NT kernel. */ @@ -31385,6 +32936,11 @@ with SQLITE_OMIT_WAL." #endif +#if !SQLITE_OS_WINNT && SQLITE_MAX_MMAP_SIZE>0 +# error "Memory mapped files require support from the Windows NT kernel,\ + compile with SQLITE_MAX_MMAP_SIZE=0." +#endif + /* ** Are most of the Win32 ANSI APIs available (i.e. with certain exceptions ** based on the sub-platform)? @@ -31423,18 +32979,14 @@ #endif /* -** Check if the GetVersionEx[AW] functions should be considered deprecated -** and avoid using them in that case. It should be noted here that if the -** value of the SQLITE_WIN32_GETVERSIONEX pre-processor macro is zero -** (whether via this block or via being manually specified), that implies -** the underlying operating system will always be based on the Windows NT -** Kernel. +** Check to see if the GetVersionEx[AW] functions are deprecated on the +** target system. GetVersionEx was first deprecated in Win8.1. */ #ifndef SQLITE_WIN32_GETVERSIONEX # if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINBLUE -# define SQLITE_WIN32_GETVERSIONEX 0 +# define SQLITE_WIN32_GETVERSIONEX 0 /* GetVersionEx() is deprecated */ # else -# define SQLITE_WIN32_GETVERSIONEX 1 +# define SQLITE_WIN32_GETVERSIONEX 1 /* GetVersionEx() is current */ # endif #endif @@ -31506,7 +33058,7 @@ ** [sometimes] not used by the code (e.g. via conditional compilation). */ #ifndef UNUSED_VARIABLE_VALUE -# define UNUSED_VARIABLE_VALUE(x) (void)(x) +# define UNUSED_VARIABLE_VALUE(x) (void)(x) #endif /* @@ -31518,10 +33070,11 @@ /* ** Do we need to manually define the Win32 file mapping APIs for use with WAL -** mode (e.g. these APIs are available in the Windows CE SDK; however, they -** are not present in the header file)? +** mode or memory mapped files (e.g. these APIs are available in the Windows +** CE SDK; however, they are not present in the header file)? */ -#if SQLITE_WIN32_FILEMAPPING_API && !defined(SQLITE_OMIT_WAL) +#if SQLITE_WIN32_FILEMAPPING_API && \ + (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) /* ** Two of the file mapping APIs are different under WinRT. Figure out which ** set we need. @@ -31549,13 +33102,13 @@ ** This file mapping API is common to both Win32 and WinRT. */ WINBASEAPI BOOL WINAPI UnmapViewOfFile(LPCVOID); -#endif /* SQLITE_WIN32_FILEMAPPING_API && !defined(SQLITE_OMIT_WAL) */ +#endif /* SQLITE_WIN32_FILEMAPPING_API */ /* ** Some Microsoft compilers lack this definition. */ #ifndef INVALID_FILE_ATTRIBUTES -# define INVALID_FILE_ATTRIBUTES ((DWORD)-1) +# define INVALID_FILE_ATTRIBUTES ((DWORD)-1) #endif #ifndef FILE_FLAG_MASK @@ -31605,7 +33158,7 @@ int szChunk; /* Chunk size configured by FCNTL_CHUNK_SIZE */ #if SQLITE_OS_WINCE LPWSTR zDeleteOnClose; /* Name of file to delete when closing */ - HANDLE hMutex; /* Mutex used to control access to shared lock */ + HANDLE hMutex; /* Mutex used to control access to shared lock */ HANDLE hShared; /* Shared memory segment used for locking */ winceLock local; /* Locks obtained by this instance of winFile */ winceLock *shared; /* Global shared lock memory for the file */ @@ -31765,10 +33318,9 @@ ** can manually set this value to 1 to emulate Win98 behavior. */ #ifdef SQLITE_TEST -SQLITE_API int sqlite3_os_type = 0; -#elif !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && \ - defined(SQLITE_WIN32_HAS_ANSI) && defined(SQLITE_WIN32_HAS_WIDE) -static int sqlite3_os_type = 0; +SQLITE_API LONG SQLITE_WIN32_VOLATILE sqlite3_os_type = 0; +#else +static LONG SQLITE_WIN32_VOLATILE sqlite3_os_type = 0; #endif #ifndef SYSCALL @@ -31843,7 +33395,7 @@ LPSECURITY_ATTRIBUTES,DWORD,DWORD,HANDLE))aSyscall[5].pCurrent) #if (!SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_ANSI) && \ - !defined(SQLITE_OMIT_WAL)) + (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)) { "CreateFileMappingA", (SYSCALL)CreateFileMappingA, 0 }, #else { "CreateFileMappingA", (SYSCALL)0, 0 }, @@ -31853,7 +33405,7 @@ DWORD,DWORD,DWORD,LPCSTR))aSyscall[6].pCurrent) #if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \ - !defined(SQLITE_OMIT_WAL)) + (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)) { "CreateFileMappingW", (SYSCALL)CreateFileMappingW, 0 }, #else { "CreateFileMappingW", (SYSCALL)0, 0 }, @@ -32193,7 +33745,8 @@ LPOVERLAPPED))aSyscall[48].pCurrent) #endif -#if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && !defined(SQLITE_OMIT_WAL)) +#if SQLITE_OS_WINCE || (!SQLITE_OS_WINRT && \ + (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)) { "MapViewOfFile", (SYSCALL)MapViewOfFile, 0 }, #else { "MapViewOfFile", (SYSCALL)0, 0 }, @@ -32263,7 +33816,7 @@ #define osUnlockFileEx ((BOOL(WINAPI*)(HANDLE,DWORD,DWORD,DWORD, \ LPOVERLAPPED))aSyscall[58].pCurrent) -#if SQLITE_OS_WINCE || !defined(SQLITE_OMIT_WAL) +#if SQLITE_OS_WINCE || !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 { "UnmapViewOfFile", (SYSCALL)UnmapViewOfFile, 0 }, #else { "UnmapViewOfFile", (SYSCALL)0, 0 }, @@ -32299,7 +33852,7 @@ #define osWaitForSingleObject ((DWORD(WINAPI*)(HANDLE, \ DWORD))aSyscall[63].pCurrent) -#if SQLITE_OS_WINRT +#if !SQLITE_OS_WINCE { "WaitForSingleObjectEx", (SYSCALL)WaitForSingleObjectEx, 0 }, #else { "WaitForSingleObjectEx", (SYSCALL)0, 0 }, @@ -32326,7 +33879,7 @@ #define osGetFileInformationByHandleEx ((BOOL(WINAPI*)(HANDLE, \ FILE_INFO_BY_HANDLE_CLASS,LPVOID,DWORD))aSyscall[66].pCurrent) -#if SQLITE_OS_WINRT && !defined(SQLITE_OMIT_WAL) +#if SQLITE_OS_WINRT && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) { "MapViewOfFileFromApp", (SYSCALL)MapViewOfFileFromApp, 0 }, #else { "MapViewOfFileFromApp", (SYSCALL)0, 0 }, @@ -32390,7 +33943,7 @@ #define osGetProcessHeap ((HANDLE(WINAPI*)(VOID))aSyscall[74].pCurrent) -#if SQLITE_OS_WINRT && !defined(SQLITE_OMIT_WAL) +#if SQLITE_OS_WINRT && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) { "CreateFileMappingFromApp", (SYSCALL)CreateFileMappingFromApp, 0 }, #else { "CreateFileMappingFromApp", (SYSCALL)0, 0 }, @@ -32399,6 +33952,22 @@ #define osCreateFileMappingFromApp ((HANDLE(WINAPI*)(HANDLE, \ LPSECURITY_ATTRIBUTES,ULONG,ULONG64,LPCWSTR))aSyscall[75].pCurrent) +/* +** NOTE: On some sub-platforms, the InterlockedCompareExchange "function" +** is really just a macro that uses a compiler intrinsic (e.g. x64). +** So do not try to make this is into a redefinable interface. +*/ +#if defined(InterlockedCompareExchange) + { "InterlockedCompareExchange", (SYSCALL)0, 0 }, + +#define osInterlockedCompareExchange InterlockedCompareExchange +#else + { "InterlockedCompareExchange", (SYSCALL)InterlockedCompareExchange, 0 }, + +#define osInterlockedCompareExchange ((LONG(WINAPI*)(LONG \ + SQLITE_WIN32_VOLATILE*, LONG,LONG))aSyscall[76].pCurrent) +#endif /* defined(InterlockedCompareExchange) */ + }; /* End of the overrideable system calls */ /* @@ -32536,8 +34105,8 @@ int rc; MUTEX_LOGIC( sqlite3_mutex *pMaster; ) /* The main static mutex */ MUTEX_LOGIC( sqlite3_mutex *pMem; ) /* The memsys static mutex */ - MUTEX_LOGIC( pMaster = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); ) - MUTEX_LOGIC( pMem = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM); ) + MUTEX_LOGIC( pMaster = sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_MASTER); ) + MUTEX_LOGIC( pMem = sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_MEM); ) sqlite3_mutex_enter(pMaster); sqlite3_mutex_enter(pMem); winMemAssertMagic(); @@ -32630,6 +34199,16 @@ #endif } +#if SQLITE_MAX_WORKER_THREADS>0 && !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && \ + SQLITE_THREADSAFE>0 +SQLITE_PRIVATE DWORD sqlite3Win32Wait(HANDLE hObject){ + DWORD rc; + while( (rc = osWaitForSingleObjectEx(hObject, INFINITE, + TRUE))==WAIT_IO_COMPLETION ){} + return rc; +} +#endif + /* ** Return true (non-zero) if we are running under WinNT, Win2K, WinXP, ** or WinCE. Return false (zero) for Win95, Win98, or WinME. @@ -32649,22 +34228,47 @@ #elif !defined(SQLITE_WIN32_HAS_WIDE) # define osIsNT() (0) #else - static int osIsNT(void){ - if( sqlite3_os_type==0 ){ -#if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WIN8 - OSVERSIONINFOW sInfo; - sInfo.dwOSVersionInfoSize = sizeof(sInfo); - osGetVersionExW(&sInfo); -#else - OSVERSIONINFOA sInfo; - sInfo.dwOSVersionInfoSize = sizeof(sInfo); - osGetVersionExA(&sInfo); +# define osIsNT() ((sqlite3_os_type==2) || sqlite3_win32_is_nt()) #endif - sqlite3_os_type = sInfo.dwPlatformId==VER_PLATFORM_WIN32_NT ? 2 : 1; - } - return sqlite3_os_type==2; + +/* +** This function determines if the machine is running a version of Windows +** based on the NT kernel. +*/ +SQLITE_API int sqlite3_win32_is_nt(void){ +#if SQLITE_OS_WINRT + /* + ** NOTE: The WinRT sub-platform is always assumed to be based on the NT + ** kernel. + */ + return 1; +#elif defined(SQLITE_WIN32_GETVERSIONEX) && SQLITE_WIN32_GETVERSIONEX + if( osInterlockedCompareExchange(&sqlite3_os_type, 0, 0)==0 ){ +#if defined(SQLITE_WIN32_HAS_ANSI) + OSVERSIONINFOA sInfo; + sInfo.dwOSVersionInfoSize = sizeof(sInfo); + osGetVersionExA(&sInfo); + osInterlockedCompareExchange(&sqlite3_os_type, + (sInfo.dwPlatformId == VER_PLATFORM_WIN32_NT) ? 2 : 1, 0); +#elif defined(SQLITE_WIN32_HAS_WIDE) + OSVERSIONINFOW sInfo; + sInfo.dwOSVersionInfoSize = sizeof(sInfo); + osGetVersionExW(&sInfo); + osInterlockedCompareExchange(&sqlite3_os_type, + (sInfo.dwPlatformId == VER_PLATFORM_WIN32_NT) ? 2 : 1, 0); +#endif } + return osInterlockedCompareExchange(&sqlite3_os_type, 2, 2)==2; +#elif SQLITE_TEST + return osInterlockedCompareExchange(&sqlite3_os_type, 2, 2)==2; +#else + /* + ** NOTE: All sub-platforms where the GetVersionEx[AW] functions are + ** deprecated are always assumed to be based on the NT kernel. + */ + return 1; #endif +} #ifdef SQLITE_WIN32_MALLOC /* @@ -32872,7 +34476,7 @@ #endif /* SQLITE_WIN32_MALLOC */ /* -** Convert a UTF-8 string to Microsoft Unicode (UTF-16?). +** Convert a UTF-8 string to Microsoft Unicode (UTF-16?). ** ** Space to hold the returned string is obtained from malloc. */ @@ -32925,7 +34529,7 @@ /* ** Convert an ANSI string to Microsoft Unicode, based on the ** current codepage settings for file apis. -** +** ** Space to hold the returned string is obtained ** from sqlite3_malloc. */ @@ -32999,7 +34603,7 @@ } /* -** Convert UTF-8 to multibyte character string. Space to hold the +** Convert UTF-8 to multibyte character string. Space to hold the ** returned string is obtained from sqlite3_malloc(). */ SQLITE_API char *sqlite3_win32_utf8_to_mbcs(const char *zFilename){ @@ -33139,11 +34743,11 @@ ** ** This routine is invoked after an error occurs in an OS function. ** It logs a message using sqlite3_log() containing the current value of -** error code and, if possible, the human-readable equivalent from +** error code and, if possible, the human-readable equivalent from ** FormatMessage. ** ** The first argument passed to the macro should be the error code that -** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN). +** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN). ** The two subsequent arguments should be the name of the OS function that ** failed and the associated file-system path, if any. */ @@ -33174,7 +34778,7 @@ /* ** The number of times that a ReadFile(), WriteFile(), and DeleteFile() -** will be retried following a locking error - probably caused by +** will be retried following a locking error - probably caused by ** antivirus software. Also the initial delay before the first retry. ** The delay increases linearly with each retry. */ @@ -33188,6 +34792,32 @@ static int winIoerrRetryDelay = SQLITE_WIN32_IOERR_RETRY_DELAY; /* +** The "winIoerrCanRetry1" macro is used to determine if a particular I/O +** error code obtained via GetLastError() is eligible to be retried. It +** must accept the error code DWORD as its only argument and should return +** non-zero if the error code is transient in nature and the operation +** responsible for generating the original error might succeed upon being +** retried. The argument to this macro should be a variable. +** +** Additionally, a macro named "winIoerrCanRetry2" may be defined. If it +** is defined, it will be consulted only when the macro "winIoerrCanRetry1" +** returns zero. The "winIoerrCanRetry2" macro is completely optional and +** may be used to include additional error codes in the set that should +** result in the failing I/O operation being retried by the caller. If +** defined, the "winIoerrCanRetry2" macro must exhibit external semantics +** identical to those of the "winIoerrCanRetry1" macro. +*/ +#if !defined(winIoerrCanRetry1) +#define winIoerrCanRetry1(a) (((a)==ERROR_ACCESS_DENIED) || \ + ((a)==ERROR_SHARING_VIOLATION) || \ + ((a)==ERROR_LOCK_VIOLATION) || \ + ((a)==ERROR_DEV_NOT_EXIST) || \ + ((a)==ERROR_NETNAME_DELETED) || \ + ((a)==ERROR_SEM_TIMEOUT) || \ + ((a)==ERROR_NETWORK_UNREACHABLE)) +#endif + +/* ** If a ReadFile() or WriteFile() error occurs, invoke this routine ** to see if it should be retried. Return TRUE to retry. Return FALSE ** to give up with an error. @@ -33200,13 +34830,18 @@ } return 0; } - if( e==ERROR_ACCESS_DENIED || - e==ERROR_LOCK_VIOLATION || - e==ERROR_SHARING_VIOLATION ){ + if( winIoerrCanRetry1(e) ){ sqlite3_win32_sleep(winIoerrRetryDelay*(1+*pnRetry)); ++*pnRetry; return 1; } +#if defined(winIoerrCanRetry2) + else if( winIoerrCanRetry2(e) ){ + sqlite3_win32_sleep(winIoerrRetryDelay*(1+*pnRetry)); + ++*pnRetry; + return 1; + } +#endif if( pError ){ *pError = e; } @@ -33218,7 +34853,7 @@ */ static void winLogIoerr(int nRetry){ if( nRetry ){ - sqlite3_log(SQLITE_IOERR, + sqlite3_log(SQLITE_IOERR, "delayed %dms for lock/sharing conflict", winIoerrRetryDelay*nRetry*(nRetry+1)/2 ); @@ -33312,17 +34947,17 @@ /* Acquire the mutex before continuing */ winceMutexAcquire(pFile->hMutex); - - /* Since the names of named mutexes, semaphores, file mappings etc are + + /* Since the names of named mutexes, semaphores, file mappings etc are ** case-sensitive, take advantage of that by uppercasing the mutex name ** and using that as the shared filemapping name. */ osCharUpperW(zName); pFile->hShared = osCreateFileMappingW(INVALID_HANDLE_VALUE, NULL, PAGE_READWRITE, 0, sizeof(winceLock), - zName); + zName); - /* Set a flag that indicates we're the first to create the memory so it + /* Set a flag that indicates we're the first to create the memory so it ** must be zero-initialized */ lastErrno = osGetLastError(); if (lastErrno == ERROR_ALREADY_EXISTS){ @@ -33333,7 +34968,7 @@ /* If we succeeded in making the shared memory handle, map it. */ if( pFile->hShared ){ - pFile->shared = (winceLock*)osMapViewOfFile(pFile->hShared, + pFile->shared = (winceLock*)osMapViewOfFile(pFile->hShared, FILE_MAP_READ|FILE_MAP_WRITE, 0, 0, sizeof(winceLock)); /* If mapping failed, close the shared memory handle and erase it */ if( !pFile->shared ){ @@ -33359,7 +34994,7 @@ pFile->hMutex = NULL; return SQLITE_IOERR; } - + /* Initialize the shared memory if we're supposed to */ if( bInit ){ memset(pFile->shared, 0, sizeof(winceLock)); @@ -33397,13 +35032,13 @@ osCloseHandle(pFile->hShared); /* Done with the mutex */ - winceMutexRelease(pFile->hMutex); + winceMutexRelease(pFile->hMutex); osCloseHandle(pFile->hMutex); pFile->hMutex = NULL; } } -/* +/* ** An implementation of the LockFile() API of Windows for CE */ static BOOL winceLockFile( @@ -33614,8 +35249,8 @@ #endif /* -** Move the current position of the file handle passed as the first -** argument to offset iOffset within the file. If successful, return 0. +** Move the current position of the file handle passed as the first +** argument to offset iOffset within the file. If successful, return 0. ** Otherwise, set pFile->lastErrno and return non-zero. */ static int winSeekFile(winFile *pFile, sqlite3_int64 iOffset){ @@ -33630,11 +35265,11 @@ upperBits = (LONG)((iOffset>>32) & 0x7fffffff); lowerBits = (LONG)(iOffset & 0xffffffff); - /* API oddity: If successful, SetFilePointer() returns a dword + /* API oddity: If successful, SetFilePointer() returns a dword ** containing the lower 32-bits of the new file-offset. Or, if it fails, - ** it returns INVALID_SET_FILE_POINTER. However according to MSDN, - ** INVALID_SET_FILE_POINTER may also be a valid new offset. So to determine - ** whether an error has actually occurred, it is also necessary to call + ** it returns INVALID_SET_FILE_POINTER. However according to MSDN, + ** INVALID_SET_FILE_POINTER may also be a valid new offset. So to determine + ** whether an error has actually occurred, it is also necessary to call ** GetLastError(). */ dwRet = osSetFilePointer(pFile->h, lowerBits, &upperBits, FILE_BEGIN); @@ -33717,7 +35352,7 @@ int cnt = 0; while( osDeleteFileW(pFile->zDeleteOnClose)==0 - && osGetFileAttributesW(pFile->zDeleteOnClose)!=0xffffffff + && osGetFileAttributesW(pFile->zDeleteOnClose)!=0xffffffff && cnt++ < WINCE_DELETION_ATTEMPTS ){ sqlite3_win32_sleep(100); /* Wait a little before trying again */ @@ -33746,7 +35381,7 @@ int amt, /* Number of bytes to read */ sqlite3_int64 offset /* Begin reading at this offset */ ){ -#if !SQLITE_OS_WINCE +#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED) OVERLAPPED overlapped; /* The offset for ReadFile. */ #endif winFile *pFile = (winFile*)id; /* file handle */ @@ -33778,7 +35413,7 @@ } #endif -#if SQLITE_OS_WINCE +#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED) if( winSeekFile(pFile, offset) ){ OSTRACE(("READ file=%p, rc=SQLITE_FULL\n", pFile->h)); return SQLITE_FULL; @@ -33850,28 +35485,28 @@ } #endif -#if SQLITE_OS_WINCE +#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED) rc = winSeekFile(pFile, offset); if( rc==0 ){ #else { #endif -#if !SQLITE_OS_WINCE +#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED) OVERLAPPED overlapped; /* The offset for WriteFile. */ #endif u8 *aRem = (u8 *)pBuf; /* Data yet to be written */ int nRem = amt; /* Number of bytes yet to be written */ DWORD nWrite; /* Bytes written by each WriteFile() call */ DWORD lastErrno = NO_ERROR; /* Value returned by GetLastError() */ -#if !SQLITE_OS_WINCE +#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED) memset(&overlapped, 0, sizeof(OVERLAPPED)); overlapped.Offset = (LONG)(offset & 0xffffffff); overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff); #endif while( nRem>0 ){ -#if SQLITE_OS_WINCE +#if SQLITE_OS_WINCE || defined(SQLITE_WIN32_NO_OVERLAPPED) if( !osWriteFile(pFile->h, aRem, nRem, &nWrite, 0) ){ #else if( !osWriteFile(pFile->h, aRem, nRem, &nWrite, &overlapped) ){ @@ -33884,7 +35519,7 @@ lastErrno = osGetLastError(); break; } -#if !SQLITE_OS_WINCE +#if !SQLITE_OS_WINCE && !defined(SQLITE_WIN32_NO_OVERLAPPED) offset += nWrite; overlapped.Offset = (LONG)(offset & 0xffffffff); overlapped.OffsetHigh = (LONG)((offset>>32) & 0x7fffffff); @@ -34145,7 +35780,7 @@ pFile->lastErrno = osGetLastError(); /* No need to log a failure to lock */ } - OSTRACE(("READ-LOCK file=%p, rc=%s\n", pFile->h, sqlite3ErrName(res))); + OSTRACE(("READ-LOCK file=%p, result=%d\n", pFile->h, res)); return res; } @@ -34169,7 +35804,7 @@ winLogError(SQLITE_IOERR_UNLOCK, pFile->lastErrno, "winUnlockReadLock", pFile->zPath); } - OSTRACE(("READ-UNLOCK file=%p, rc=%s\n", pFile->h, sqlite3ErrName(res))); + OSTRACE(("READ-UNLOCK file=%p, result=%d\n", pFile->h, res)); return res; } @@ -34244,8 +35879,16 @@ ** If you are using this code as a model for alternative VFSes, do not ** copy this retry logic. It is a hack intended for Windows only. */ - OSTRACE(("LOCK-PENDING-FAIL file=%p, count=%d, rc=%s\n", - pFile->h, cnt, sqlite3ErrName(res))); + lastErrno = osGetLastError(); + OSTRACE(("LOCK-PENDING-FAIL file=%p, count=%d, result=%d\n", + pFile->h, cnt, res)); + if( lastErrno==ERROR_INVALID_HANDLE ){ + pFile->lastErrno = lastErrno; + rc = SQLITE_IOERR_LOCK; + OSTRACE(("LOCK-FAIL file=%p, count=%d, rc=%s\n", + pFile->h, cnt, sqlite3ErrName(rc))); + return rc; + } if( cnt ) sqlite3_win32_sleep(1); } gotPendingLock = res; @@ -34330,25 +35973,25 @@ ** non-zero, otherwise zero. */ static int winCheckReservedLock(sqlite3_file *id, int *pResOut){ - int rc; + int res; winFile *pFile = (winFile*)id; SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; ); OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p\n", pFile->h, pResOut)); assert( id!=0 ); if( pFile->locktype>=RESERVED_LOCK ){ - rc = 1; - OSTRACE(("TEST-WR-LOCK file=%p, rc=%d (local)\n", pFile->h, rc)); + res = 1; + OSTRACE(("TEST-WR-LOCK file=%p, result=%d (local)\n", pFile->h, res)); }else{ - rc = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE, 0, 1, 0); - if( rc ){ + res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE, 0, 1, 0); + if( res ){ winUnlockFile(&pFile->h, RESERVED_BYTE, 0, 1, 0); } - rc = !rc; - OSTRACE(("TEST-WR-LOCK file=%p, rc=%d (remote)\n", pFile->h, rc)); + res = !res; + OSTRACE(("TEST-WR-LOCK file=%p, result=%d (remote)\n", pFile->h, res)); } - *pResOut = rc; + *pResOut = res; OSTRACE(("TEST-WR-LOCK file=%p, pResOut=%p, *pResOut=%d, rc=SQLITE_OK\n", pFile->h, pResOut, *pResOut)); return SQLITE_OK; @@ -34399,7 +36042,7 @@ } /* -** If *pArg is inititially negative then this is a query. Set *pArg to +** If *pArg is initially negative then this is a query. Set *pArg to ** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set. ** ** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags. @@ -34489,6 +36132,17 @@ OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h)); return SQLITE_OK; } +#ifdef SQLITE_TEST + case SQLITE_FCNTL_WIN32_SET_HANDLE: { + LPHANDLE phFile = (LPHANDLE)pArg; + HANDLE hOldFile = pFile->h; + pFile->h = *phFile; + *phFile = hOldFile; + OSTRACE(("FCNTL oldFile=%p, newFile=%p, rc=SQLITE_OK\n", + hOldFile, pFile->h)); + return SQLITE_OK; + } +#endif case SQLITE_FCNTL_TEMPFILENAME: { char *zTFile = 0; int rc = winGetTempname(pFile->pVfs, &zTFile); @@ -34546,7 +36200,7 @@ ((p->ctrlFlags & WINFILE_PSOW)?SQLITE_IOCAP_POWERSAFE_OVERWRITE:0); } -/* +/* ** Windows will only let you create file view mappings ** on allocation size granularity boundaries. ** During sqlite3_os_init() we do a GetSystemInfo() @@ -34558,11 +36212,11 @@ /* ** Helper functions to obtain and relinquish the global mutex. The -** global mutex is used to protect the winLockInfo objects used by +** global mutex is used to protect the winLockInfo objects used by ** this file, all of which may be shared by multiple threads. ** -** Function winShmMutexHeld() is used to assert() that the global mutex -** is held when required. This function is only used as part of assert() +** Function winShmMutexHeld() is used to assert() that the global mutex +** is held when required. This function is only used as part of assert() ** statements. e.g. ** ** winShmEnterMutex() @@ -34592,10 +36246,10 @@ ** this object or while reading or writing the following fields: ** ** nRef -** pNext +** pNext ** ** The following fields are read-only after the object is created: -** +** ** fid ** zFilename ** @@ -34691,7 +36345,7 @@ if( lockType == _SHM_WRLCK ) dwFlags |= LOCKFILE_EXCLUSIVE_LOCK; rc = winLockFile(&pFile->hFile.h, dwFlags, ofst, 0, nByte, 0); } - + if( rc!= 0 ){ rc = SQLITE_OK; }else{ @@ -34787,7 +36441,7 @@ } pNew->zFilename = (char*)&pNew[1]; sqlite3_snprintf(nName+15, pNew->zFilename, "%s-shm", pDbFd->zPath); - sqlite3FileSuffix3(pDbFd->zPath, pNew->zFilename); + sqlite3FileSuffix3(pDbFd->zPath, pNew->zFilename); /* Look to see if there is an existing winShmNode that can be used. ** If no matching winShmNode currently exists, create a new one. @@ -34824,7 +36478,7 @@ } /* Check to see if another process is holding the dead-man switch. - ** If not, truncate the file to zero length. + ** If not, truncate the file to zero length. */ if( winShmSystemLock(pShmNode, _SHM_WRLCK, WIN_SHM_DMS, 1)==SQLITE_OK ){ rc = winTruncate((sqlite3_file *)&pShmNode->hFile, 0); @@ -34853,7 +36507,7 @@ ** the cover of the winShmEnterMutex() mutex and the pointer from the ** new (struct winShm) object to the pShmNode has been set. All that is ** left to do is to link the new object into the linked list starting - ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex + ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex ** mutex. */ sqlite3_mutex_enter(pShmNode->mutex); @@ -34873,7 +36527,7 @@ } /* -** Close a connection to shared-memory. Delete the underlying +** Close a connection to shared-memory. Delete the underlying ** storage if deleteFlag is true. */ static int winShmUnmap( @@ -34962,7 +36616,7 @@ if( rc==SQLITE_OK ){ p->exclMask &= ~mask; p->sharedMask &= ~mask; - } + } }else if( flags & SQLITE_SHM_SHARED ){ u16 allShared = 0; /* Union of locks held by connections other than "p" */ @@ -35001,7 +36655,7 @@ break; } } - + /* Get the exclusive locks at the system level. Then if successful ** also mark the local connection as being locked. */ @@ -35021,7 +36675,7 @@ } /* -** Implement a memory barrier or memory fence on shared memory. +** Implement a memory barrier or memory fence on shared memory. ** ** All loads and stores begun before the barrier must complete before ** any load or store begun after the barrier. @@ -35036,22 +36690,22 @@ } /* -** This function is called to obtain a pointer to region iRegion of the -** shared-memory associated with the database file fd. Shared-memory regions -** are numbered starting from zero. Each shared-memory region is szRegion +** This function is called to obtain a pointer to region iRegion of the +** shared-memory associated with the database file fd. Shared-memory regions +** are numbered starting from zero. Each shared-memory region is szRegion ** bytes in size. ** ** If an error occurs, an error code is returned and *pp is set to NULL. ** ** Otherwise, if the isWrite parameter is 0 and the requested shared-memory ** region has not been allocated (by any client, including one running in a -** separate process), then *pp is set to NULL and SQLITE_OK returned. If -** isWrite is non-zero and the requested shared-memory region has not yet +** separate process), then *pp is set to NULL and SQLITE_OK returned. If +** isWrite is non-zero and the requested shared-memory region has not yet ** been allocated, it is allocated by this function. ** ** If the shared-memory region has already been allocated or is allocated by -** this call as described above, then it is mapped into this processes -** address space (if it is not already), *pp is set to point to the mapped +** this call as described above, then it is mapped into this processes +** address space (if it is not already), *pp is set to point to the mapped ** memory and SQLITE_OK returned. */ static int winShmMap( @@ -35123,17 +36777,17 @@ while( pShmNode->nRegion<=iRegion ){ HANDLE hMap = NULL; /* file-mapping handle */ void *pMap = 0; /* Mapped memory region */ - + #if SQLITE_OS_WINRT hMap = osCreateFileMappingFromApp(pShmNode->hFile.h, NULL, PAGE_READWRITE, nByte, NULL ); #elif defined(SQLITE_WIN32_HAS_WIDE) - hMap = osCreateFileMappingW(pShmNode->hFile.h, + hMap = osCreateFileMappingW(pShmNode->hFile.h, NULL, PAGE_READWRITE, 0, nByte, NULL ); #elif defined(SQLITE_WIN32_HAS_ANSI) - hMap = osCreateFileMappingA(pShmNode->hFile.h, + hMap = osCreateFileMappingA(pShmNode->hFile.h, NULL, PAGE_READWRITE, 0, nByte, NULL ); #endif @@ -35230,14 +36884,14 @@ /* ** Memory map or remap the file opened by file-descriptor pFd (if the file -** is already mapped, the existing mapping is replaced by the new). Or, if -** there already exists a mapping for this file, and there are still +** is already mapped, the existing mapping is replaced by the new). Or, if +** there already exists a mapping for this file, and there are still ** outstanding xFetch() references to it, this function is a no-op. ** -** If parameter nByte is non-negative, then it is the requested size of -** the mapping to create. Otherwise, if nByte is less than zero, then the +** If parameter nByte is non-negative, then it is the requested size of +** the mapping to create. Otherwise, if nByte is less than zero, then the ** requested size is the size of the file on disk. The actual size of the -** created mapping is either the requested size or the value configured +** created mapping is either the requested size or the value configured ** using SQLITE_FCNTL_MMAP_SIZE, whichever is smaller. ** ** SQLITE_OK is returned if no error occurs (even if the mapping is not @@ -35266,7 +36920,7 @@ nMap = pFd->mmapSizeMax; } nMap &= ~(sqlite3_int64)(winSysInfo.dwPageSize - 1); - + if( nMap==0 && pFd->mmapSize>0 ){ winUnmapfile(pFd); } @@ -35338,7 +36992,7 @@ ** Finally, if an error does occur, return an SQLite error code. The final ** value of *pp is undefined in this case. ** -** If this function does return a pointer, the caller must eventually +** If this function does return a pointer, the caller must eventually ** release the reference by calling winUnfetch(). */ static int winFetch(sqlite3_file *fd, i64 iOff, int nAmt, void **pp){ @@ -35373,20 +37027,20 @@ } /* -** If the third argument is non-NULL, then this function releases a +** If the third argument is non-NULL, then this function releases a ** reference obtained by an earlier call to winFetch(). The second ** argument passed to this function must be the same as the corresponding -** argument that was passed to the winFetch() invocation. +** argument that was passed to the winFetch() invocation. ** -** Or, if the third argument is NULL, then this function is being called -** to inform the VFS layer that, according to POSIX, any existing mapping +** Or, if the third argument is NULL, then this function is being called +** to inform the VFS layer that, according to POSIX, any existing mapping ** may now be invalid and should be unmapped. */ static int winUnfetch(sqlite3_file *fd, i64 iOff, void *p){ #if SQLITE_MAX_MMAP_SIZE>0 winFile *pFd = (winFile*)fd; /* The underlying database file */ - /* If p==0 (unmap the entire file) then there must be no outstanding + /* If p==0 (unmap the entire file) then there must be no outstanding ** xFetch references. Or, if p!=0 (meaning it is an xFetch reference), ** then there must be at least one outstanding. */ assert( (p==0)==(pFd->nFetchOut==0) ); @@ -35402,7 +37056,7 @@ }else{ /* FIXME: If Windows truly always prevents truncating or deleting a ** file while a mapping is held, then the following winUnmapfile() call - ** is unnecessary can can be omitted - potentially improving + ** is unnecessary can be omitted - potentially improving ** performance. */ winUnmapfile(pFd); } @@ -35532,7 +37186,7 @@ /* It's odd to simulate an io-error here, but really this is just ** using the io-error infrastructure to test that SQLite handles this - ** function failing. + ** function failing. */ SimulateIOError( return SQLITE_IOERR ); @@ -35714,7 +37368,7 @@ } /* - ** Check that the output buffer is large enough for the temporary file + ** Check that the output buffer is large enough for the temporary file ** name in the following format: ** ** "/etilqs_XXXXXXXXXXXXXXX\0\0" @@ -35817,18 +37471,18 @@ #ifndef NDEBUG int isOpenJournal = (isCreate && ( - eType==SQLITE_OPEN_MASTER_JOURNAL - || eType==SQLITE_OPEN_MAIN_JOURNAL + eType==SQLITE_OPEN_MASTER_JOURNAL + || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_WAL )); #endif OSTRACE(("OPEN name=%s, pFile=%p, flags=%x, pOutFlags=%p\n", zUtf8Name, id, flags, pOutFlags)); - /* Check the following statements are true: + /* Check the following statements are true: ** - ** (a) Exactly one of the READWRITE and READONLY flags must be set, and + ** (a) Exactly one of the READWRITE and READONLY flags must be set, and ** (b) if CREATE is set, then READWRITE must also be set, and ** (c) if EXCLUSIVE is set, then CREATE must also be set. ** (d) if DELETEONCLOSE is set, then CREATE must also be set. @@ -35838,17 +37492,17 @@ assert(isExclusive==0 || isCreate); assert(isDelete==0 || isCreate); - /* The main DB, main journal, WAL file and master journal are never + /* The main DB, main journal, WAL file and master journal are never ** automatically deleted. Nor are they ever temporary files. */ assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_DB ); assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_JOURNAL ); assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MASTER_JOURNAL ); assert( (!isDelete && zName) || eType!=SQLITE_OPEN_WAL ); /* Assert that the upper layer has set one of the "file-type" flags. */ - assert( eType==SQLITE_OPEN_MAIN_DB || eType==SQLITE_OPEN_TEMP_DB - || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL - || eType==SQLITE_OPEN_SUBJOURNAL || eType==SQLITE_OPEN_MASTER_JOURNAL + assert( eType==SQLITE_OPEN_MAIN_DB || eType==SQLITE_OPEN_TEMP_DB + || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL + || eType==SQLITE_OPEN_SUBJOURNAL || eType==SQLITE_OPEN_MASTER_JOURNAL || eType==SQLITE_OPEN_TRANSIENT_DB || eType==SQLITE_OPEN_WAL ); @@ -35863,8 +37517,8 @@ } #endif - /* If the second argument to this function is NULL, generate a - ** temporary file name to use + /* If the second argument to this function is NULL, generate a + ** temporary file name to use */ if( !zUtf8Name ){ assert( isDelete && !isOpenJournal ); @@ -35904,8 +37558,8 @@ dwDesiredAccess = GENERIC_READ; } - /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is - ** created. SQLite doesn't use it to indicate "exclusive access" + /* SQLITE_OPEN_EXCLUSIVE is used to make sure that a new file is + ** created. SQLite doesn't use it to indicate "exclusive access" ** as it is usually understood. */ if( isExclusive ){ @@ -35994,7 +37648,7 @@ sqlite3_free(zConverted); sqlite3_free(zTmpname); if( isReadWrite && !isExclusive ){ - return winOpen(pVfs, zName, id, + return winOpen(pVfs, zName, id, ((flags|SQLITE_OPEN_READONLY) & ~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)), pOutFlags); @@ -36203,14 +37857,14 @@ WIN32_FILE_ATTRIBUTE_DATA sAttrData; memset(&sAttrData, 0, sizeof(sAttrData)); while( !(rc = osGetFileAttributesExW((LPCWSTR)zConverted, - GetFileExInfoStandard, + GetFileExInfoStandard, &sAttrData)) && winRetryIoerr(&cnt, &lastErrno) ){} if( rc ){ /* For an SQLITE_ACCESS_EXISTS query, treat a zero-length file ** as if it does not exist. */ if( flags==SQLITE_ACCESS_EXISTS - && sAttrData.nFileSizeHigh==0 + && sAttrData.nFileSizeHigh==0 && sAttrData.nFileSizeLow==0 ){ attr = INVALID_FILE_ATTRIBUTES; }else{ @@ -36309,7 +37963,7 @@ int nFull, /* Size of output buffer in bytes */ char *zFull /* Output buffer */ ){ - + #if defined(__CYGWIN__) SimulateIOError( return SQLITE_ERROR ); UNUSED_PARAMETER(nFull); @@ -36622,20 +38276,20 @@ ** epoch of noon in Greenwich on November 24, 4714 B.C according to the ** proleptic Gregorian calendar. ** -** On success, return SQLITE_OK. Return SQLITE_ERROR if the time and date +** On success, return SQLITE_OK. Return SQLITE_ERROR if the time and date ** cannot be found. */ static int winCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *piNow){ - /* FILETIME structure is a 64-bit value representing the number of - 100-nanosecond intervals since January 1, 1601 (= JD 2305813.5). + /* FILETIME structure is a 64-bit value representing the number of + 100-nanosecond intervals since January 1, 1601 (= JD 2305813.5). */ FILETIME ft; static const sqlite3_int64 winFiletimeEpoch = 23058135*(sqlite3_int64)8640000; #ifdef SQLITE_TEST static const sqlite3_int64 unixEpoch = 24405875*(sqlite3_int64)8640000; #endif /* 2^32 - to avoid use of LL and warnings in gcc */ - static const sqlite3_int64 max32BitValue = + static const sqlite3_int64 max32BitValue = (sqlite3_int64)2000000000 + (sqlite3_int64)2000000000 + (sqlite3_int64)294967296; @@ -36651,7 +38305,7 @@ #endif *piNow = winFiletimeEpoch + - ((((sqlite3_int64)ft.dwHighDateTime)*max32BitValue) + + ((((sqlite3_int64)ft.dwHighDateTime)*max32BitValue) + (sqlite3_int64)ft.dwLowDateTime)/(sqlite3_int64)10000; #ifdef SQLITE_TEST @@ -36770,7 +38424,7 @@ /* Double-check that the aSyscall[] array has been constructed ** correctly. See ticket [bb3a86e890c8e96ab] */ - assert( ArraySize(aSyscall)==76 ); + assert( ArraySize(aSyscall)==77 ); /* get memory map allocation granularity */ memset(&winSysInfo, 0, sizeof(SYSTEM_INFO)); @@ -36788,10 +38442,10 @@ sqlite3_vfs_register(&winLongPathVfs, 0); #endif - return SQLITE_OK; + return SQLITE_OK; } -SQLITE_API int sqlite3_os_end(void){ +SQLITE_API int sqlite3_os_end(void){ #if SQLITE_OS_WINRT if( sleepObj!=NULL ){ osCloseHandle(sleepObj); @@ -37246,118 +38900,99 @@ PgHdr *pPage1; /* Reference to page 1 */ }; -/* -** Some of the assert() macros in this code are too expensive to run -** even during normal debugging. Use them only rarely on long-running -** tests. Enable the expensive asserts using the -** -DSQLITE_ENABLE_EXPENSIVE_ASSERT=1 compile-time option. -*/ -#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT -# define expensive_assert(X) assert(X) -#else -# define expensive_assert(X) -#endif - /********************************** Linked List Management ********************/ -#if !defined(NDEBUG) && defined(SQLITE_ENABLE_EXPENSIVE_ASSERT) -/* -** Check that the pCache->pSynced variable is set correctly. If it -** is not, either fail an assert or return zero. Otherwise, return -** non-zero. This is only used in debugging builds, as follows: -** -** expensive_assert( pcacheCheckSynced(pCache) ); -*/ -static int pcacheCheckSynced(PCache *pCache){ - PgHdr *p; - for(p=pCache->pDirtyTail; p!=pCache->pSynced; p=p->pDirtyPrev){ - assert( p->nRef || (p->flags&PGHDR_NEED_SYNC) ); - } - return (p==0 || p->nRef || (p->flags&PGHDR_NEED_SYNC)==0); -} -#endif /* !NDEBUG && SQLITE_ENABLE_EXPENSIVE_ASSERT */ +/* Allowed values for second argument to pcacheManageDirtyList() */ +#define PCACHE_DIRTYLIST_REMOVE 1 /* Remove pPage from dirty list */ +#define PCACHE_DIRTYLIST_ADD 2 /* Add pPage to the dirty list */ +#define PCACHE_DIRTYLIST_FRONT 3 /* Move pPage to the front of the list */ /* -** Remove page pPage from the list of dirty pages. +** Manage pPage's participation on the dirty list. Bits of the addRemove +** argument determines what operation to do. The 0x01 bit means first +** remove pPage from the dirty list. The 0x02 means add pPage back to +** the dirty list. Doing both moves pPage to the front of the dirty list. */ -static void pcacheRemoveFromDirtyList(PgHdr *pPage){ +static void pcacheManageDirtyList(PgHdr *pPage, u8 addRemove){ PCache *p = pPage->pCache; - assert( pPage->pDirtyNext || pPage==p->pDirtyTail ); - assert( pPage->pDirtyPrev || pPage==p->pDirty ); - - /* Update the PCache1.pSynced variable if necessary. */ - if( p->pSynced==pPage ){ - PgHdr *pSynced = pPage->pDirtyPrev; - while( pSynced && (pSynced->flags&PGHDR_NEED_SYNC) ){ - pSynced = pSynced->pDirtyPrev; + if( addRemove & PCACHE_DIRTYLIST_REMOVE ){ + assert( pPage->pDirtyNext || pPage==p->pDirtyTail ); + assert( pPage->pDirtyPrev || pPage==p->pDirty ); + + /* Update the PCache1.pSynced variable if necessary. */ + if( p->pSynced==pPage ){ + PgHdr *pSynced = pPage->pDirtyPrev; + while( pSynced && (pSynced->flags&PGHDR_NEED_SYNC) ){ + pSynced = pSynced->pDirtyPrev; + } + p->pSynced = pSynced; } - p->pSynced = pSynced; + + if( pPage->pDirtyNext ){ + pPage->pDirtyNext->pDirtyPrev = pPage->pDirtyPrev; + }else{ + assert( pPage==p->pDirtyTail ); + p->pDirtyTail = pPage->pDirtyPrev; + } + if( pPage->pDirtyPrev ){ + pPage->pDirtyPrev->pDirtyNext = pPage->pDirtyNext; + }else{ + assert( pPage==p->pDirty ); + p->pDirty = pPage->pDirtyNext; + if( p->pDirty==0 && p->bPurgeable ){ + assert( p->eCreate==1 ); + p->eCreate = 2; + } + } + pPage->pDirtyNext = 0; + pPage->pDirtyPrev = 0; } - - if( pPage->pDirtyNext ){ - pPage->pDirtyNext->pDirtyPrev = pPage->pDirtyPrev; - }else{ - assert( pPage==p->pDirtyTail ); - p->pDirtyTail = pPage->pDirtyPrev; - } - if( pPage->pDirtyPrev ){ - pPage->pDirtyPrev->pDirtyNext = pPage->pDirtyNext; - }else{ - assert( pPage==p->pDirty ); - p->pDirty = pPage->pDirtyNext; - if( p->pDirty==0 && p->bPurgeable ){ - assert( p->eCreate==1 ); - p->eCreate = 2; + if( addRemove & PCACHE_DIRTYLIST_ADD ){ + assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage ); + + pPage->pDirtyNext = p->pDirty; + if( pPage->pDirtyNext ){ + assert( pPage->pDirtyNext->pDirtyPrev==0 ); + pPage->pDirtyNext->pDirtyPrev = pPage; + }else{ + p->pDirtyTail = pPage; + if( p->bPurgeable ){ + assert( p->eCreate==2 ); + p->eCreate = 1; + } } + p->pDirty = pPage; + if( !p->pSynced && 0==(pPage->flags&PGHDR_NEED_SYNC) ){ + p->pSynced = pPage; + } } - pPage->pDirtyNext = 0; - pPage->pDirtyPrev = 0; - - expensive_assert( pcacheCheckSynced(p) ); } /* -** Add page pPage to the head of the dirty list (PCache1.pDirty is set to -** pPage). -*/ -static void pcacheAddToDirtyList(PgHdr *pPage){ - PCache *p = pPage->pCache; - - assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage ); - - pPage->pDirtyNext = p->pDirty; - if( pPage->pDirtyNext ){ - assert( pPage->pDirtyNext->pDirtyPrev==0 ); - pPage->pDirtyNext->pDirtyPrev = pPage; - }else if( p->bPurgeable ){ - assert( p->eCreate==2 ); - p->eCreate = 1; - } - p->pDirty = pPage; - if( !p->pDirtyTail ){ - p->pDirtyTail = pPage; - } - if( !p->pSynced && 0==(pPage->flags&PGHDR_NEED_SYNC) ){ - p->pSynced = pPage; - } - expensive_assert( pcacheCheckSynced(p) ); -} - -/* ** Wrapper around the pluggable caches xUnpin method. If the cache is ** being used for an in-memory database, this function is a no-op. */ static void pcacheUnpin(PgHdr *p){ - PCache *pCache = p->pCache; - if( pCache->bPurgeable ){ + if( p->pCache->bPurgeable ){ if( p->pgno==1 ){ - pCache->pPage1 = 0; + p->pCache->pPage1 = 0; } - sqlite3GlobalConfig.pcache2.xUnpin(pCache->pCache, p->pPage, 0); + sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 0); } } +/* +** Compute the number of pages of cache requested. +*/ +static int numberOfCachePages(PCache *p){ + if( p->szCache>=0 ){ + return p->szCache; + }else{ + return (int)((-1024*(i64)p->szCache)/(p->szPage+p->szExtra)); + } +} + /*************************************************** General Interfaces ****** ** ** Initialize and shutdown the page cache subsystem. Neither of these @@ -37390,7 +39025,7 @@ ** The caller discovers how much space needs to be allocated by ** calling sqlite3PcacheSize(). */ -SQLITE_PRIVATE void sqlite3PcacheOpen( +SQLITE_PRIVATE int sqlite3PcacheOpen( int szPage, /* Size of every page */ int szExtra, /* Extra space associated with each page */ int bPurgeable, /* True if pages are on backing store */ @@ -37399,166 +39034,212 @@ PCache *p /* Preallocated space for the PCache */ ){ memset(p, 0, sizeof(PCache)); - p->szPage = szPage; + p->szPage = 1; p->szExtra = szExtra; p->bPurgeable = bPurgeable; p->eCreate = 2; p->xStress = xStress; p->pStress = pStress; p->szCache = 100; + return sqlite3PcacheSetPageSize(p, szPage); } /* ** Change the page size for PCache object. The caller must ensure that there ** are no outstanding page references when this function is called. */ -SQLITE_PRIVATE void sqlite3PcacheSetPageSize(PCache *pCache, int szPage){ +SQLITE_PRIVATE int sqlite3PcacheSetPageSize(PCache *pCache, int szPage){ assert( pCache->nRef==0 && pCache->pDirty==0 ); - if( pCache->pCache ){ - sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); - pCache->pCache = 0; + if( pCache->szPage ){ + sqlite3_pcache *pNew; + pNew = sqlite3GlobalConfig.pcache2.xCreate( + szPage, pCache->szExtra + ROUND8(sizeof(PgHdr)), + pCache->bPurgeable + ); + if( pNew==0 ) return SQLITE_NOMEM; + sqlite3GlobalConfig.pcache2.xCachesize(pNew, numberOfCachePages(pCache)); + if( pCache->pCache ){ + sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); + } + pCache->pCache = pNew; pCache->pPage1 = 0; + pCache->szPage = szPage; } - pCache->szPage = szPage; + return SQLITE_OK; } /* -** Compute the number of pages of cache requested. -*/ -static int numberOfCachePages(PCache *p){ - if( p->szCache>=0 ){ - return p->szCache; - }else{ - return (int)((-1024*(i64)p->szCache)/(p->szPage+p->szExtra)); - } -} - -/* ** Try to obtain a page from the cache. +** +** This routine returns a pointer to an sqlite3_pcache_page object if +** such an object is already in cache, or if a new one is created. +** This routine returns a NULL pointer if the object was not in cache +** and could not be created. +** +** The createFlags should be 0 to check for existing pages and should +** be 3 (not 1, but 3) to try to create a new page. +** +** If the createFlag is 0, then NULL is always returned if the page +** is not already in the cache. If createFlag is 1, then a new page +** is created only if that can be done without spilling dirty pages +** and without exceeding the cache size limit. +** +** The caller needs to invoke sqlite3PcacheFetchFinish() to properly +** initialize the sqlite3_pcache_page object and convert it into a +** PgHdr object. The sqlite3PcacheFetch() and sqlite3PcacheFetchFinish() +** routines are split this way for performance reasons. When separated +** they can both (usually) operate without having to push values to +** the stack on entry and pop them back off on exit, which saves a +** lot of pushing and popping. */ -SQLITE_PRIVATE int sqlite3PcacheFetch( +SQLITE_PRIVATE sqlite3_pcache_page *sqlite3PcacheFetch( PCache *pCache, /* Obtain the page from this cache */ Pgno pgno, /* Page number to obtain */ - int createFlag, /* If true, create page if it does not exist already */ - PgHdr **ppPage /* Write the page here */ + int createFlag /* If true, create page if it does not exist already */ ){ - sqlite3_pcache_page *pPage; - PgHdr *pPgHdr = 0; int eCreate; assert( pCache!=0 ); - assert( createFlag==1 || createFlag==0 ); + assert( pCache->pCache!=0 ); + assert( createFlag==3 || createFlag==0 ); assert( pgno>0 ); - /* If the pluggable cache (sqlite3_pcache*) has not been allocated, - ** allocate it now. - */ - if( !pCache->pCache ){ - sqlite3_pcache *p; - if( !createFlag ){ - *ppPage = 0; - return SQLITE_OK; - } - p = sqlite3GlobalConfig.pcache2.xCreate( - pCache->szPage, pCache->szExtra + sizeof(PgHdr), pCache->bPurgeable - ); - if( !p ){ - return SQLITE_NOMEM; - } - sqlite3GlobalConfig.pcache2.xCachesize(p, numberOfCachePages(pCache)); - pCache->pCache = p; - } - /* eCreate defines what to do if the page does not exist. ** 0 Do not allocate a new page. (createFlag==0) ** 1 Allocate a new page if doing so is inexpensive. ** (createFlag==1 AND bPurgeable AND pDirty) ** 2 Allocate a new page even it doing so is difficult. ** (createFlag==1 AND !(bPurgeable AND pDirty) */ - eCreate = createFlag==0 ? 0 : pCache->eCreate; - assert( (createFlag*(1+(!pCache->bPurgeable||!pCache->pDirty)))==eCreate ); - pPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, eCreate); - if( !pPage && eCreate==1 ){ - PgHdr *pPg; + eCreate = createFlag & pCache->eCreate; + assert( eCreate==0 || eCreate==1 || eCreate==2 ); + assert( createFlag==0 || pCache->eCreate==eCreate ); + assert( createFlag==0 || eCreate==1+(!pCache->bPurgeable||!pCache->pDirty) ); + return sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, eCreate); +} - /* Find a dirty page to write-out and recycle. First try to find a - ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC - ** cleared), but if that is not possible settle for any other - ** unreferenced dirty page. - */ - expensive_assert( pcacheCheckSynced(pCache) ); - for(pPg=pCache->pSynced; - pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); - pPg=pPg->pDirtyPrev - ); - pCache->pSynced = pPg; - if( !pPg ){ - for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev); - } - if( pPg ){ - int rc; +/* +** If the sqlite3PcacheFetch() routine is unable to allocate a new +** page because new clean pages are available for reuse and the cache +** size limit has been reached, then this routine can be invoked to +** try harder to allocate a page. This routine might invoke the stress +** callback to spill dirty pages to the journal. It will then try to +** allocate the new page and will only fail to allocate a new page on +** an OOM error. +** +** This routine should be invoked only after sqlite3PcacheFetch() fails. +*/ +SQLITE_PRIVATE int sqlite3PcacheFetchStress( + PCache *pCache, /* Obtain the page from this cache */ + Pgno pgno, /* Page number to obtain */ + sqlite3_pcache_page **ppPage /* Write result here */ +){ + PgHdr *pPg; + if( pCache->eCreate==2 ) return 0; + + + /* Find a dirty page to write-out and recycle. First try to find a + ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC + ** cleared), but if that is not possible settle for any other + ** unreferenced dirty page. + */ + for(pPg=pCache->pSynced; + pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); + pPg=pPg->pDirtyPrev + ); + pCache->pSynced = pPg; + if( !pPg ){ + for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev); + } + if( pPg ){ + int rc; #ifdef SQLITE_LOG_CACHE_SPILL - sqlite3_log(SQLITE_FULL, - "spill page %d making room for %d - cache used: %d/%d", - pPg->pgno, pgno, - sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache), - numberOfCachePages(pCache)); + sqlite3_log(SQLITE_FULL, + "spill page %d making room for %d - cache used: %d/%d", + pPg->pgno, pgno, + sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache), + numberOfCachePages(pCache)); #endif - rc = pCache->xStress(pCache->pStress, pPg); - if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){ - return rc; - } + rc = pCache->xStress(pCache->pStress, pPg); + if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){ + return rc; } - - pPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, 2); } + *ppPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, 2); + return *ppPage==0 ? SQLITE_NOMEM : SQLITE_OK; +} - if( pPage ){ - pPgHdr = (PgHdr *)pPage->pExtra; +/* +** This is a helper routine for sqlite3PcacheFetchFinish() +** +** In the uncommon case where the page being fetched has not been +** initialized, this routine is invoked to do the initialization. +** This routine is broken out into a separate function since it +** requires extra stack manipulation that can be avoided in the common +** case. +*/ +static SQLITE_NOINLINE PgHdr *pcacheFetchFinishWithInit( + PCache *pCache, /* Obtain the page from this cache */ + Pgno pgno, /* Page number obtained */ + sqlite3_pcache_page *pPage /* Page obtained by prior PcacheFetch() call */ +){ + PgHdr *pPgHdr; + assert( pPage!=0 ); + pPgHdr = (PgHdr*)pPage->pExtra; + assert( pPgHdr->pPage==0 ); + memset(pPgHdr, 0, sizeof(PgHdr)); + pPgHdr->pPage = pPage; + pPgHdr->pData = pPage->pBuf; + pPgHdr->pExtra = (void *)&pPgHdr[1]; + memset(pPgHdr->pExtra, 0, pCache->szExtra); + pPgHdr->pCache = pCache; + pPgHdr->pgno = pgno; + return sqlite3PcacheFetchFinish(pCache,pgno,pPage); +} - if( !pPgHdr->pPage ){ - memset(pPgHdr, 0, sizeof(PgHdr)); - pPgHdr->pPage = pPage; - pPgHdr->pData = pPage->pBuf; - pPgHdr->pExtra = (void *)&pPgHdr[1]; - memset(pPgHdr->pExtra, 0, pCache->szExtra); - pPgHdr->pCache = pCache; - pPgHdr->pgno = pgno; - } - assert( pPgHdr->pCache==pCache ); - assert( pPgHdr->pgno==pgno ); - assert( pPgHdr->pData==pPage->pBuf ); - assert( pPgHdr->pExtra==(void *)&pPgHdr[1] ); +/* +** This routine converts the sqlite3_pcache_page object returned by +** sqlite3PcacheFetch() into an initialized PgHdr object. This routine +** must be called after sqlite3PcacheFetch() in order to get a usable +** result. +*/ +SQLITE_PRIVATE PgHdr *sqlite3PcacheFetchFinish( + PCache *pCache, /* Obtain the page from this cache */ + Pgno pgno, /* Page number obtained */ + sqlite3_pcache_page *pPage /* Page obtained by prior PcacheFetch() call */ +){ + PgHdr *pPgHdr; - if( 0==pPgHdr->nRef ){ - pCache->nRef++; - } - pPgHdr->nRef++; - if( pgno==1 ){ - pCache->pPage1 = pPgHdr; - } + if( pPage==0 ) return 0; + pPgHdr = (PgHdr *)pPage->pExtra; + + if( !pPgHdr->pPage ){ + return pcacheFetchFinishWithInit(pCache, pgno, pPage); } - *ppPage = pPgHdr; - return (pPgHdr==0 && eCreate) ? SQLITE_NOMEM : SQLITE_OK; + if( 0==pPgHdr->nRef ){ + pCache->nRef++; + } + pPgHdr->nRef++; + if( pgno==1 ){ + pCache->pPage1 = pPgHdr; + } + return pPgHdr; } /* ** Decrement the reference count on a page. If the page is clean and the -** reference count drops to 0, then it is made elible for recycling. +** reference count drops to 0, then it is made eligible for recycling. */ -SQLITE_PRIVATE void sqlite3PcacheRelease(PgHdr *p){ +SQLITE_PRIVATE void SQLITE_NOINLINE sqlite3PcacheRelease(PgHdr *p){ assert( p->nRef>0 ); p->nRef--; if( p->nRef==0 ){ - PCache *pCache = p->pCache; - pCache->nRef--; + p->pCache->nRef--; if( (p->flags&PGHDR_DIRTY)==0 ){ pcacheUnpin(p); - }else{ + }else if( p->pDirtyPrev!=0 ){ /* Move the page to the head of the dirty list. */ - pcacheRemoveFromDirtyList(p); - pcacheAddToDirtyList(p); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); } } } @@ -37577,17 +39258,15 @@ ** page pointed to by p is invalid. */ SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr *p){ - PCache *pCache; assert( p->nRef==1 ); if( p->flags&PGHDR_DIRTY ){ - pcacheRemoveFromDirtyList(p); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); } - pCache = p->pCache; - pCache->nRef--; + p->pCache->nRef--; if( p->pgno==1 ){ - pCache->pPage1 = 0; + p->pCache->pPage1 = 0; } - sqlite3GlobalConfig.pcache2.xUnpin(pCache->pCache, p->pPage, 1); + sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 1); } /* @@ -37599,7 +39278,7 @@ assert( p->nRef>0 ); if( 0==(p->flags & PGHDR_DIRTY) ){ p->flags |= PGHDR_DIRTY; - pcacheAddToDirtyList( p); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_ADD); } } @@ -37609,7 +39288,7 @@ */ SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr *p){ if( (p->flags & PGHDR_DIRTY) ){ - pcacheRemoveFromDirtyList(p); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC); if( p->nRef==0 ){ pcacheUnpin(p); @@ -37648,8 +39327,7 @@ sqlite3GlobalConfig.pcache2.xRekey(pCache->pCache, p->pPage, p->pgno,newPgno); p->pgno = newPgno; if( (p->flags&PGHDR_DIRTY) && (p->flags&PGHDR_NEED_SYNC) ){ - pcacheRemoveFromDirtyList(p); - pcacheAddToDirtyList(p); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); } } @@ -37690,9 +39368,8 @@ ** Close a cache. */ SQLITE_PRIVATE void sqlite3PcacheClose(PCache *pCache){ - if( pCache->pCache ){ - sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); - } + assert( pCache->pCache!=0 ); + sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); } /* @@ -37801,11 +39478,8 @@ ** Return the total number of pages in the cache. */ SQLITE_PRIVATE int sqlite3PcachePagecount(PCache *pCache){ - int nPage = 0; - if( pCache->pCache ){ - nPage = sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache); - } - return nPage; + assert( pCache->pCache!=0 ); + return sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache); } #ifdef SQLITE_TEST @@ -37821,22 +39495,27 @@ ** Set the suggested cache-size value. */ SQLITE_PRIVATE void sqlite3PcacheSetCachesize(PCache *pCache, int mxPage){ + assert( pCache->pCache!=0 ); pCache->szCache = mxPage; - if( pCache->pCache ){ - sqlite3GlobalConfig.pcache2.xCachesize(pCache->pCache, - numberOfCachePages(pCache)); - } + sqlite3GlobalConfig.pcache2.xCachesize(pCache->pCache, + numberOfCachePages(pCache)); } /* ** Free up as much memory as possible from the page cache. */ SQLITE_PRIVATE void sqlite3PcacheShrink(PCache *pCache){ - if( pCache->pCache ){ - sqlite3GlobalConfig.pcache2.xShrink(pCache->pCache); - } + assert( pCache->pCache!=0 ); + sqlite3GlobalConfig.pcache2.xShrink(pCache->pCache); } +/* +** Return the size of the header added by this middleware layer +** in the page-cache hierarchy. +*/ +SQLITE_PRIVATE int sqlite3HeaderSizePcache(void){ return ROUND8(sizeof(PgHdr)); } + + #if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) /* ** For all dirty pages currently in the cache, invoke the specified @@ -37868,7 +39547,7 @@ ** This file implements the default page cache implementation (the ** sqlite3_pcache interface). It also contains part of the implementation ** of the SQLITE_CONFIG_PAGECACHE and sqlite3_release_memory() features. -** If the default page cache implementation is overriden, then neither of +** If the default page cache implementation is overridden, then neither of ** these two features are available. */ @@ -37879,7 +39558,7 @@ typedef struct PGroup PGroup; /* Each page cache (or PCache) belongs to a PGroup. A PGroup is a set -** of one or more PCaches that are able to recycle each others unpinned +** of one or more PCaches that are able to recycle each other's unpinned ** pages when they are under memory pressure. A PGroup is an instance of ** the following object. ** @@ -38150,7 +39829,7 @@ pPg = 0; } #else - pPg = pcache1Alloc(sizeof(PgHdr1) + pCache->szPage + pCache->szExtra); + pPg = pcache1Alloc(ROUND8(sizeof(PgHdr1)) + pCache->szPage + pCache->szExtra); p = (PgHdr1 *)&((u8 *)pPg)[pCache->szPage]; #endif pcache1EnterMutex(pCache->pGroup); @@ -38237,7 +39916,7 @@ ** ** The PCache mutex must be held when this function is called. */ -static int pcache1ResizeHash(PCache1 *p){ +static void pcache1ResizeHash(PCache1 *p){ PgHdr1 **apNew; unsigned int nNew; unsigned int i; @@ -38269,8 +39948,6 @@ p->apHash = apNew; p->nHash = nNew; } - - return (p->apHash ? SQLITE_OK : SQLITE_NOMEM); } /* @@ -38405,6 +40082,9 @@ memset(&pcache1, 0, sizeof(pcache1)); } +/* forward declaration */ +static void pcache1Destroy(sqlite3_pcache *p); + /* ** Implementation of the sqlite3_pcache.xCreate method. ** @@ -38449,13 +40129,18 @@ pCache->szPage = szPage; pCache->szExtra = szExtra; pCache->bPurgeable = (bPurgeable ? 1 : 0); + pcache1EnterMutex(pGroup); + pcache1ResizeHash(pCache); if( bPurgeable ){ pCache->nMin = 10; - pcache1EnterMutex(pGroup); pGroup->nMinPage += pCache->nMin; pGroup->mxPinned = pGroup->nMaxPage + 10 - pGroup->nMinPage; - pcache1LeaveMutex(pGroup); } + pcache1LeaveMutex(pGroup); + if( pCache->nHash==0 ){ + pcache1Destroy((sqlite3_pcache*)pCache); + pCache = 0; + } } return (sqlite3_pcache *)pCache; } @@ -38510,7 +40195,96 @@ return n; } + /* +** Implement steps 3, 4, and 5 of the pcache1Fetch() algorithm described +** in the header of the pcache1Fetch() procedure. +** +** This steps are broken out into a separate procedure because they are +** usually not needed, and by avoiding the stack initialization required +** for these steps, the main pcache1Fetch() procedure can run faster. +*/ +static SQLITE_NOINLINE PgHdr1 *pcache1FetchStage2( + PCache1 *pCache, + unsigned int iKey, + int createFlag +){ + unsigned int nPinned; + PGroup *pGroup = pCache->pGroup; + PgHdr1 *pPage = 0; + + /* Step 3: Abort if createFlag is 1 but the cache is nearly full */ + assert( pCache->nPage >= pCache->nRecyclable ); + nPinned = pCache->nPage - pCache->nRecyclable; + assert( pGroup->mxPinned == pGroup->nMaxPage + 10 - pGroup->nMinPage ); + assert( pCache->n90pct == pCache->nMax*9/10 ); + if( createFlag==1 && ( + nPinned>=pGroup->mxPinned + || nPinned>=pCache->n90pct + || (pcache1UnderMemoryPressure(pCache) && pCache->nRecyclablenPage>=pCache->nHash ) pcache1ResizeHash(pCache); + assert( pCache->nHash>0 && pCache->apHash ); + + /* Step 4. Try to recycle a page. */ + if( pCache->bPurgeable && pGroup->pLruTail && ( + (pCache->nPage+1>=pCache->nMax) + || pGroup->nCurrentPage>=pGroup->nMaxPage + || pcache1UnderMemoryPressure(pCache) + )){ + PCache1 *pOther; + pPage = pGroup->pLruTail; + assert( pPage->isPinned==0 ); + pcache1RemoveFromHash(pPage); + pcache1PinPage(pPage); + pOther = pPage->pCache; + + /* We want to verify that szPage and szExtra are the same for pOther + ** and pCache. Assert that we can verify this by comparing sums. */ + assert( (pCache->szPage & (pCache->szPage-1))==0 && pCache->szPage>=512 ); + assert( pCache->szExtra<512 ); + assert( (pOther->szPage & (pOther->szPage-1))==0 && pOther->szPage>=512 ); + assert( pOther->szExtra<512 ); + + if( pOther->szPage+pOther->szExtra != pCache->szPage+pCache->szExtra ){ + pcache1FreePage(pPage); + pPage = 0; + }else{ + pGroup->nCurrentPage -= (pOther->bPurgeable - pCache->bPurgeable); + } + } + + /* Step 5. If a usable page buffer has still not been found, + ** attempt to allocate a new one. + */ + if( !pPage ){ + if( createFlag==1 ) sqlite3BeginBenignMalloc(); + pPage = pcache1AllocPage(pCache); + if( createFlag==1 ) sqlite3EndBenignMalloc(); + } + + if( pPage ){ + unsigned int h = iKey % pCache->nHash; + pCache->nPage++; + pPage->iKey = iKey; + pPage->pNext = pCache->apHash[h]; + pPage->pCache = pCache; + pPage->pLruPrev = 0; + pPage->pLruNext = 0; + pPage->isPinned = 1; + *(void **)pPage->page.pExtra = 0; + pCache->apHash[h] = pPage; + if( iKey>pCache->iMaxKey ){ + pCache->iMaxKey = iKey; + } + } + return pPage; +} + +/* ** Implementation of the sqlite3_pcache.xFetch method. ** ** Fetch a page by key value. @@ -38569,117 +40343,30 @@ unsigned int iKey, int createFlag ){ - unsigned int nPinned; PCache1 *pCache = (PCache1 *)p; - PGroup *pGroup; PgHdr1 *pPage = 0; assert( offsetof(PgHdr1,page)==0 ); assert( pCache->bPurgeable || createFlag!=1 ); assert( pCache->bPurgeable || pCache->nMin==0 ); assert( pCache->bPurgeable==0 || pCache->nMin==10 ); assert( pCache->nMin==0 || pCache->bPurgeable ); - pcache1EnterMutex(pGroup = pCache->pGroup); + assert( pCache->nHash>0 ); + pcache1EnterMutex(pCache->pGroup); /* Step 1: Search the hash table for an existing entry. */ - if( pCache->nHash>0 ){ - unsigned int h = iKey % pCache->nHash; - for(pPage=pCache->apHash[h]; pPage&&pPage->iKey!=iKey; pPage=pPage->pNext); - } + pPage = pCache->apHash[iKey % pCache->nHash]; + while( pPage && pPage->iKey!=iKey ){ pPage = pPage->pNext; } /* Step 2: Abort if no existing page is found and createFlag is 0 */ if( pPage ){ if( !pPage->isPinned ) pcache1PinPage(pPage); - goto fetch_out; + }else if( createFlag ){ + /* Steps 3, 4, and 5 implemented by this subroutine */ + pPage = pcache1FetchStage2(pCache, iKey, createFlag); } - if( createFlag==0 ){ - goto fetch_out; - } - - /* The pGroup local variable will normally be initialized by the - ** pcache1EnterMutex() macro above. But if SQLITE_MUTEX_OMIT is defined, - ** then pcache1EnterMutex() is a no-op, so we have to initialize the - ** local variable here. Delaying the initialization of pGroup is an - ** optimization: The common case is to exit the module before reaching - ** this point. - */ -#ifdef SQLITE_MUTEX_OMIT - pGroup = pCache->pGroup; -#endif - - /* Step 3: Abort if createFlag is 1 but the cache is nearly full */ - assert( pCache->nPage >= pCache->nRecyclable ); - nPinned = pCache->nPage - pCache->nRecyclable; - assert( pGroup->mxPinned == pGroup->nMaxPage + 10 - pGroup->nMinPage ); - assert( pCache->n90pct == pCache->nMax*9/10 ); - if( createFlag==1 && ( - nPinned>=pGroup->mxPinned - || nPinned>=pCache->n90pct - || pcache1UnderMemoryPressure(pCache) - )){ - goto fetch_out; - } - - if( pCache->nPage>=pCache->nHash && pcache1ResizeHash(pCache) ){ - goto fetch_out; - } - assert( pCache->nHash>0 && pCache->apHash ); - - /* Step 4. Try to recycle a page. */ - if( pCache->bPurgeable && pGroup->pLruTail && ( - (pCache->nPage+1>=pCache->nMax) - || pGroup->nCurrentPage>=pGroup->nMaxPage - || pcache1UnderMemoryPressure(pCache) - )){ - PCache1 *pOther; - pPage = pGroup->pLruTail; - assert( pPage->isPinned==0 ); - pcache1RemoveFromHash(pPage); - pcache1PinPage(pPage); - pOther = pPage->pCache; - - /* We want to verify that szPage and szExtra are the same for pOther - ** and pCache. Assert that we can verify this by comparing sums. */ - assert( (pCache->szPage & (pCache->szPage-1))==0 && pCache->szPage>=512 ); - assert( pCache->szExtra<512 ); - assert( (pOther->szPage & (pOther->szPage-1))==0 && pOther->szPage>=512 ); - assert( pOther->szExtra<512 ); - - if( pOther->szPage+pOther->szExtra != pCache->szPage+pCache->szExtra ){ - pcache1FreePage(pPage); - pPage = 0; - }else{ - pGroup->nCurrentPage -= (pOther->bPurgeable - pCache->bPurgeable); - } - } - - /* Step 5. If a usable page buffer has still not been found, - ** attempt to allocate a new one. - */ - if( !pPage ){ - if( createFlag==1 ) sqlite3BeginBenignMalloc(); - pPage = pcache1AllocPage(pCache); - if( createFlag==1 ) sqlite3EndBenignMalloc(); - } - - if( pPage ){ - unsigned int h = iKey % pCache->nHash; - pCache->nPage++; - pPage->iKey = iKey; - pPage->pNext = pCache->apHash[h]; - pPage->pCache = pCache; - pPage->pLruPrev = 0; - pPage->pLruNext = 0; - pPage->isPinned = 1; - *(void **)pPage->page.pExtra = 0; - pCache->apHash[h] = pPage; - } - -fetch_out: - if( pPage && iKey>pCache->iMaxKey ){ - pCache->iMaxKey = iKey; - } - pcache1LeaveMutex(pGroup); + assert( pPage==0 || pCache->iMaxKey>=iKey ); + pcache1LeaveMutex(pCache->pGroup); return (sqlite3_pcache_page*)pPage; } @@ -38827,6 +40514,11 @@ sqlite3_config(SQLITE_CONFIG_PCACHE2, &defaultMethods); } +/* +** Return the size of the header on each page of this PCACHE implementation. +*/ +SQLITE_PRIVATE int sqlite3HeaderSizePcache1(void){ return ROUND8(sizeof(PgHdr1)); } + #ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT /* ** This function is called to free superfluous dynamically allocated memory @@ -38938,7 +40630,7 @@ ** No INSERTs may occurs after a SMALLEST. An assertion will fail if ** that is attempted. ** -** The cost of an INSERT is roughly constant. (Sometime new memory +** The cost of an INSERT is roughly constant. (Sometimes new memory ** has to be allocated on an INSERT.) The cost of a TEST with a new ** batch number is O(NlogN) where N is the number of elements in the RowSet. ** The cost of a TEST using the same batch number is O(logN). The cost @@ -38999,8 +40691,8 @@ struct RowSetEntry *pFresh; /* Source of new entry objects */ struct RowSetEntry *pForest; /* List of binary trees of entries */ u16 nFresh; /* Number of objects on pFresh */ - u8 rsFlags; /* Various flags */ - u8 iBatch; /* Current insert batch */ + u16 rsFlags; /* Various flags */ + int iBatch; /* Current insert batch */ }; /* @@ -39330,11 +41022,11 @@ ** Check to see if element iRowid was inserted into the rowset as ** part of any insert batch prior to iBatch. Return 1 or 0. ** -** If this is the first test of a new batch and if there exist entires -** on pRowSet->pEntry, then sort those entires into the forest at +** If this is the first test of a new batch and if there exist entries +** on pRowSet->pEntry, then sort those entries into the forest at ** pRowSet->pForest so that they can be tested. */ -SQLITE_PRIVATE int sqlite3RowSetTest(RowSet *pRowSet, u8 iBatch, sqlite3_int64 iRowid){ +SQLITE_PRIVATE int sqlite3RowSetTest(RowSet *pRowSet, int iBatch, sqlite3_int64 iRowid){ struct RowSetEntry *p, *pTree; /* This routine is never called after sqlite3RowSetNext() */ @@ -39613,12 +41305,12 @@ ** Definition: Two databases (or the same database at two points it time) ** are said to be "logically equivalent" if they give the same answer to ** all queries. Note in particular the content of freelist leaf -** pages can be changed arbitarily without effecting the logical equivalence +** pages can be changed arbitrarily without affecting the logical equivalence ** of the database. ** ** (7) At any time, if any subset, including the empty set and the total set, ** of the unsynced changes to a rollback journal are removed and the -** journal is rolled back, the resulting database file will be logical +** journal is rolled back, the resulting database file will be logically ** equivalent to the database file at the beginning of the transaction. ** ** (8) When a transaction is rolled back, the xTruncate method of the VFS @@ -39915,7 +41607,7 @@ ** ** The exception is when the database file is unlocked as the pager moves ** from ERROR to OPEN state. At this point there may be a hot-journal file -** in the file-system that needs to be rolled back (as part of a OPEN->SHARED +** in the file-system that needs to be rolled back (as part of an OPEN->SHARED ** transition, by the same pager or any other). If the call to xUnlock() ** fails at this point and the pager is left holding an EXCLUSIVE lock, this ** can confuse the call to xCheckReservedLock() call made later as part @@ -39998,7 +41690,7 @@ #define SPILLFLAG_NOSYNC 0x04 /* Spill is ok, but do not sync */ /* -** A open page cache is an instance of struct Pager. A description of +** An open page cache is an instance of struct Pager. A description of ** some of the more important member variables follows: ** ** eState @@ -40163,13 +41855,14 @@ u8 ckptSyncFlags; /* SYNC_NORMAL or SYNC_FULL for checkpoint */ u8 walSyncFlags; /* SYNC_NORMAL or SYNC_FULL for wal writes */ u8 syncFlags; /* SYNC_NORMAL or SYNC_FULL otherwise */ - u8 tempFile; /* zFilename is a temporary file */ + u8 tempFile; /* zFilename is a temporary or immutable file */ + u8 noLock; /* Do not lock (except in WAL mode) */ u8 readOnly; /* True for a read-only database */ u8 memDb; /* True to inhibit all file I/O */ /************************************************************************** ** The following block contains those class members that change during - ** routine opertion. Class members not in this block are either fixed + ** routine operation. Class members not in this block are either fixed ** when the pager is first created or else only change when there is a ** significant mode change (such as changing the page_size, locking_mode, ** or the journal_mode). From another view, these class members describe @@ -40182,6 +41875,8 @@ u8 setMaster; /* True if a m-j name has been written to jrnl */ u8 doNotSpill; /* Do not spill the cache when non-zero */ u8 subjInMemory; /* True to use in-memory sub-journals */ + u8 bUseFetch; /* True to use xFetch() */ + u8 hasBeenUsed; /* True if any content previously read from this pager*/ Pgno dbSize; /* Number of pages in the database */ Pgno dbOrigSize; /* dbSize before the current transaction */ Pgno dbFileSize; /* Number of pages in the database file */ @@ -40199,9 +41894,9 @@ sqlite3_backup *pBackup; /* Pointer to list of ongoing backup processes */ PagerSavepoint *aSavepoint; /* Array of active savepoints */ int nSavepoint; /* Number of elements in aSavepoint[] */ + u32 iDataVersion; /* Changes whenever database content changes */ char dbFileVers[16]; /* Changes whenever database file changes */ - u8 bUseFetch; /* True to use xFetch() */ int nMmapOut; /* Number of mmap pages currently outstanding */ sqlite3_int64 szMmap; /* Desired maximum mmap size */ PgHdr *pMmapFreelist; /* List of free mmap page headers (pDirty) */ @@ -40628,7 +42323,7 @@ assert( eLock!=NO_LOCK || pagerUseWal(pPager)==0 ); if( isOpen(pPager->fd) ){ assert( pPager->eLock>=eLock ); - rc = sqlite3OsUnlock(pPager->fd, eLock); + rc = pPager->noLock ? SQLITE_OK : sqlite3OsUnlock(pPager->fd, eLock); if( pPager->eLock!=UNKNOWN_LOCK ){ pPager->eLock = (u8)eLock; } @@ -40652,7 +42347,7 @@ assert( eLock==SHARED_LOCK || eLock==RESERVED_LOCK || eLock==EXCLUSIVE_LOCK ); if( pPager->eLockeLock==UNKNOWN_LOCK ){ - rc = sqlite3OsLock(pPager->fd, eLock); + rc = pPager->noLock ? SQLITE_OK : sqlite3OsLock(pPager->fd, eLock); if( rc==SQLITE_OK && (pPager->eLock!=UNKNOWN_LOCK||eLock==EXCLUSIVE_LOCK) ){ pPager->eLock = (u8)eLock; IOTRACE(("LOCK %p %d\n", pPager, eLock)) @@ -41161,12 +42856,11 @@ if( !zMaster || pPager->journalMode==PAGER_JOURNALMODE_MEMORY - || pPager->journalMode==PAGER_JOURNALMODE_OFF + || !isOpen(pPager->jfd) ){ return SQLITE_OK; } pPager->setMaster = 1; - assert( isOpen(pPager->jfd) ); assert( pPager->journalHdr <= pPager->journalOff ); /* Calculate the length in bytes and the checksum of zMaster */ @@ -41215,29 +42909,23 @@ } /* -** Find a page in the hash table given its page number. Return -** a pointer to the page or NULL if the requested page is not -** already in memory. -*/ -static PgHdr *pager_lookup(Pager *pPager, Pgno pgno){ - PgHdr *p = 0; /* Return value */ - - /* It is not possible for a call to PcacheFetch() with createFlag==0 to - ** fail, since no attempt to allocate dynamic memory will be made. - */ - (void)sqlite3PcacheFetch(pPager->pPCache, pgno, 0, &p); - return p; -} - -/* ** Discard the entire contents of the in-memory page-cache. */ static void pager_reset(Pager *pPager){ + pPager->iDataVersion++; sqlite3BackupRestart(pPager->pBackup); sqlite3PcacheClear(pPager->pPCache); } /* +** Return the pPager->iDataVersion value +*/ +SQLITE_PRIVATE u32 sqlite3PagerDataVersion(Pager *pPager){ + assert( pPager->eState>PAGER_OPEN ); + return pPager->iDataVersion; +} + +/* ** Free all structures in the Pager.aSavepoint[] array and set both ** Pager.aSavepoint and Pager.nSavepoint to zero. Close the sub-journal ** if it is open and the pager is not in exclusive mode. @@ -41493,6 +43181,14 @@ rc = SQLITE_OK; }else{ rc = sqlite3OsTruncate(pPager->jfd, 0); + if( rc==SQLITE_OK && pPager->fullSync ){ + /* Make sure the new file size is written into the inode right away. + ** Otherwise the journal might resurrect following a power loss and + ** cause the last transaction to roll back. See + ** https://bugzilla.mozilla.org/show_bug.cgi?id=1072773 + */ + rc = sqlite3OsSync(pPager->jfd, pPager->syncFlags); + } } pPager->journalOff = 0; }else if( pPager->journalMode==PAGER_JOURNALMODE_PERSIST @@ -41521,7 +43217,7 @@ #ifdef SQLITE_CHECK_PAGES sqlite3PcacheIterateDirty(pPager->pPCache, pager_set_pagehash); if( pPager->dbSize==0 && sqlite3PcacheRefCount(pPager->pPCache)>0 ){ - PgHdr *p = pager_lookup(pPager, 1); + PgHdr *p = sqlite3PagerLookup(pPager, 1); if( p ){ p->pageHash = 0; sqlite3PagerUnrefNotNull(p); @@ -41800,7 +43496,7 @@ if( pagerUseWal(pPager) ){ pPg = 0; }else{ - pPg = pager_lookup(pPager, pgno); + pPg = sqlite3PagerLookup(pPager, pgno); } assert( pPg || !MEMDB ); assert( pPager->eState!=PAGER_OPEN || pPg==0 ); @@ -41980,7 +43676,7 @@ rc = sqlite3OsFileSize(pMaster, &nMasterJournal); if( rc!=SQLITE_OK ) goto delmaster_out; nMasterPtr = pVfs->mxPathname+1; - zMasterJournal = sqlite3Malloc((int)nMasterJournal + nMasterPtr + 1); + zMasterJournal = sqlite3Malloc(nMasterJournal + nMasterPtr + 1); if( !zMasterJournal ){ rc = SQLITE_NOMEM; goto delmaster_out; @@ -42049,7 +43745,7 @@ ** If the file on disk is currently larger than nPage pages, then use the VFS ** xTruncate() method to truncate it. ** -** Or, it might might be the case that the file on disk is smaller than +** Or, it might be the case that the file on disk is smaller than ** nPage pages. Some operating system implementations can get confused if ** you try to truncate a file to some size that is larger than it ** currently is, so detect this case and write a single zero byte to @@ -42108,7 +43804,7 @@ /* ** Set the value of the Pager.sectorSize variable for the given ** pager based on the value returned by the xSectorSize method -** of the open database file. The sector size will be used used +** of the open database file. The sector size will be used ** to determine the size and alignment of journal header and ** master journal pointers within created journal files. ** @@ -42443,7 +44139,7 @@ ** ** For an encrypted database, the situation is more complex: bytes ** 24..39 of the database are white noise. But the probability of - ** white noising equaling 16 bytes of 0xff is vanishingly small so + ** white noise equaling 16 bytes of 0xff is vanishingly small so ** we should still be ok. */ memset(pPager->dbFileVers, 0xff, sizeof(pPager->dbFileVers)); @@ -43170,11 +44866,15 @@ if( rc==SQLITE_OK ){ pager_reset(pPager); - pPager->dbSize = (Pgno)((nByte+pageSize-1)/pageSize); - pPager->pageSize = pageSize; + rc = sqlite3PcacheSetPageSize(pPager->pPCache, pageSize); + } + if( rc==SQLITE_OK ){ sqlite3PageFree(pPager->pTmpSpace); pPager->pTmpSpace = pNew; - sqlite3PcacheSetPageSize(pPager->pPCache, pageSize); + pPager->dbSize = (Pgno)((nByte+pageSize-1)/pageSize); + pPager->pageSize = pageSize; + }else{ + sqlite3PageFree(pNew); } } @@ -43308,7 +45008,7 @@ int rc; /* Return code */ /* Check that this is either a no-op (because the requested lock is - ** already held, or one of the transistions that the busy-handler + ** already held), or one of the transitions that the busy-handler ** may be invoked during, according to the comment above ** sqlite3PagerSetBusyhandler(). */ @@ -43427,7 +45127,7 @@ PgHdr **ppPage /* OUT: Acquired page object */ ){ PgHdr *p; /* Memory mapped page to return */ - + if( pPager->pMmapFreelist ){ *ppPage = p = pPager->pMmapFreelist; pPager->pMmapFreelist = p->pDirty; @@ -43936,8 +45636,8 @@ ** a rollback or by user request, respectively. ** ** Spilling is also prohibited when in an error state since that could - ** lead to database corruption. In the current implementaton it - ** is impossible for sqlite3PcacheFetch() to be called with createFlag==1 + ** lead to database corruption. In the current implementation it + ** is impossible for sqlite3PcacheFetch() to be called with createFlag==3 ** while in the error state, hence it is impossible for this routine to ** be called in the error state. Nevertheless, we include a NEVER() ** test for the error state as a safeguard against future changes. @@ -44212,30 +45912,38 @@ ** + The value returned by sqlite3OsSectorSize() ** + The largest page size that can be written atomically. */ - if( rc==SQLITE_OK && !readOnly ){ - setSectorSize(pPager); - assert(SQLITE_DEFAULT_PAGE_SIZE<=SQLITE_MAX_DEFAULT_PAGE_SIZE); - if( szPageDfltsectorSize ){ - if( pPager->sectorSize>SQLITE_MAX_DEFAULT_PAGE_SIZE ){ - szPageDflt = SQLITE_MAX_DEFAULT_PAGE_SIZE; - }else{ - szPageDflt = (u32)pPager->sectorSize; + if( rc==SQLITE_OK ){ + int iDc = sqlite3OsDeviceCharacteristics(pPager->fd); + if( !readOnly ){ + setSectorSize(pPager); + assert(SQLITE_DEFAULT_PAGE_SIZE<=SQLITE_MAX_DEFAULT_PAGE_SIZE); + if( szPageDfltsectorSize ){ + if( pPager->sectorSize>SQLITE_MAX_DEFAULT_PAGE_SIZE ){ + szPageDflt = SQLITE_MAX_DEFAULT_PAGE_SIZE; + }else{ + szPageDflt = (u32)pPager->sectorSize; + } } - } #ifdef SQLITE_ENABLE_ATOMIC_WRITE - { - int iDc = sqlite3OsDeviceCharacteristics(pPager->fd); - int ii; - assert(SQLITE_IOCAP_ATOMIC512==(512>>8)); - assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8)); - assert(SQLITE_MAX_DEFAULT_PAGE_SIZE<=65536); - for(ii=szPageDflt; ii<=SQLITE_MAX_DEFAULT_PAGE_SIZE; ii=ii*2){ - if( iDc&(SQLITE_IOCAP_ATOMIC|(ii>>8)) ){ - szPageDflt = ii; + { + int ii; + assert(SQLITE_IOCAP_ATOMIC512==(512>>8)); + assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8)); + assert(SQLITE_MAX_DEFAULT_PAGE_SIZE<=65536); + for(ii=szPageDflt; ii<=SQLITE_MAX_DEFAULT_PAGE_SIZE; ii=ii*2){ + if( iDc&(SQLITE_IOCAP_ATOMIC|(ii>>8)) ){ + szPageDflt = ii; + } } } - } #endif + } + pPager->noLock = sqlite3_uri_boolean(zFilename, "nolock", 0); + if( (iDc & SQLITE_IOCAP_IMMUTABLE)!=0 + || sqlite3_uri_boolean(zFilename, "immutable", 0) ){ + vfsFlags |= SQLITE_OPEN_READONLY; + goto act_like_temp_file; + } } }else{ /* If a temporary file is requested, it is not opened immediately. @@ -44245,10 +45953,14 @@ ** This branch is also run for an in-memory database. An in-memory ** database is the same as a temp-file that is never written out to ** disk and uses an in-memory rollback journal. + ** + ** This branch also runs for files marked as immutable. */ +act_like_temp_file: tempFile = 1; - pPager->eState = PAGER_READER; - pPager->eLock = EXCLUSIVE_LOCK; + pPager->eState = PAGER_READER; /* Pretend we already have a lock */ + pPager->eLock = EXCLUSIVE_LOCK; /* Pretend we are in EXCLUSIVE locking mode */ + pPager->noLock = 1; /* Do no locking */ readOnly = (vfsFlags&SQLITE_OPEN_READONLY); } @@ -44261,22 +45973,23 @@ testcase( rc!=SQLITE_OK ); } - /* If an error occurred in either of the blocks above, free the - ** Pager structure and close the file. + /* Initialize the PCache object. */ + if( rc==SQLITE_OK ){ + assert( nExtra<1000 ); + nExtra = ROUND8(nExtra); + rc = sqlite3PcacheOpen(szPageDflt, nExtra, !memDb, + !memDb?pagerStress:0, (void *)pPager, pPager->pPCache); + } + + /* If an error occurred above, free the Pager structure and close the file. */ if( rc!=SQLITE_OK ){ - assert( !pPager->pTmpSpace ); sqlite3OsClose(pPager->fd); + sqlite3PageFree(pPager->pTmpSpace); sqlite3_free(pPager); return rc; } - /* Initialize the PCache object. */ - assert( nExtra<1000 ); - nExtra = ROUND8(nExtra); - sqlite3PcacheOpen(szPageDflt, nExtra, !memDb, - !memDb?pagerStress:0, (void *)pPager, pPager->pPCache); - PAGERTRACE(("OPEN %d %s\n", FILEHANDLEID(pPager->fd), pPager->zFilename)); IOTRACE(("OPEN %p %s\n", pPager, pPager->zFilename)) @@ -44289,9 +46002,6 @@ /* pPager->nPage = 0; */ pPager->mxPgno = SQLITE_MAX_PAGE_COUNT; /* pPager->state = PAGER_UNLOCK; */ -#if 0 - assert( pPager->state == (tempFile ? PAGER_EXCLUSIVE : PAGER_UNLOCK) ); -#endif /* pPager->errMask = 0; */ pPager->tempFile = (u8)tempFile; assert( tempFile==PAGER_LOCKINGMODE_NORMAL @@ -44466,7 +46176,7 @@ *pExists = (first!=0); }else if( rc==SQLITE_CANTOPEN ){ /* If we cannot open the rollback journal file in order to see if - ** its has a zero header, that might be due to an I/O error, or + ** it has a zero header, that might be due to an I/O error, or ** it might be due to the race condition described above and in ** ticket #3883. Either way, assume that the journal is hot. ** This might be a false positive. But if it is, then the @@ -44648,16 +46358,12 @@ ); } - if( !pPager->tempFile && ( - pPager->pBackup - || sqlite3PcachePagecount(pPager->pPCache)>0 - || USEFETCH(pPager) - )){ - /* The shared-lock has just been acquired on the database file - ** and there are already pages in the cache (from a previous - ** read or write transaction). Check to see if the database - ** has been modified. If the database has changed, flush the - ** cache. + if( !pPager->tempFile && pPager->hasBeenUsed ){ + /* The shared-lock has just been acquired then check to + ** see if the database has been modified. If the database has changed, + ** flush the cache. The pPager->hasBeenUsed flag prevents this from + ** occurring on the very first access to a file, in order to save a + ** single unnecessary sqlite3OsRead() call at the start-up. ** ** Database changes is detected by looking at 15 bytes beginning ** at offset 24 into the file. The first 4 of these 16 bytes are @@ -44822,13 +46528,13 @@ if( pgno==0 ){ return SQLITE_CORRUPT_BKPT; } + pPager->hasBeenUsed = 1; /* If the pager is in the error state, return an error immediately. ** Otherwise, request the page from the PCache layer. */ if( pPager->errCode!=SQLITE_OK ){ rc = pPager->errCode; }else{ - if( bMmapOk && pagerUseWal(pPager) ){ rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame); if( rc!=SQLITE_OK ) goto pager_acquire_err; @@ -44843,7 +46549,7 @@ if( rc==SQLITE_OK && pData ){ if( pPager->eState>PAGER_READER ){ - (void)sqlite3PcacheFetch(pPager->pPCache, pgno, 0, &pPg); + pPg = sqlite3PagerLookup(pPager, pgno); } if( pPg==0 ){ rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg); @@ -44861,7 +46567,16 @@ } } - rc = sqlite3PcacheFetch(pPager->pPCache, pgno, 1, ppPage); + { + sqlite3_pcache_page *pBase; + pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3); + if( pBase==0 ){ + rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase); + if( rc!=SQLITE_OK ) goto pager_acquire_err; + } + pPg = *ppPage = sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pBase); + if( pPg==0 ) rc = SQLITE_NOMEM; + } } if( rc!=SQLITE_OK ){ @@ -44958,13 +46673,13 @@ ** has ever happened. */ SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno){ - PgHdr *pPg = 0; + sqlite3_pcache_page *pPage; assert( pPager!=0 ); assert( pgno!=0 ); assert( pPager->pPCache!=0 ); - assert( pPager->eState>=PAGER_READER && pPager->eState!=PAGER_ERROR ); - sqlite3PcacheFetch(pPager->pPCache, pgno, 0, &pPg); - return pPg; + pPage = sqlite3PcacheFetch(pPager->pPCache, pgno, 0); + assert( pPage==0 || pPager->hasBeenUsed ); + return sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pPage); } /* @@ -45301,109 +47016,120 @@ } /* -** Mark a data page as writeable. This routine must be called before -** making changes to a page. The caller must check the return value -** of this function and be careful not to change any page data unless -** this routine returns SQLITE_OK. +** This is a variant of sqlite3PagerWrite() that runs when the sector size +** is larger than the page size. SQLite makes the (reasonable) assumption that +** all bytes of a sector are written together by hardware. Hence, all bytes of +** a sector need to be journalled in case of a power loss in the middle of +** a write. ** -** The difference between this function and pager_write() is that this -** function also deals with the special case where 2 or more pages -** fit on a single disk sector. In this case all co-resident pages -** must have been written to the journal file before returning. -** -** If an error occurs, SQLITE_NOMEM or an IO error code is returned -** as appropriate. Otherwise, SQLITE_OK. +** Usually, the sector size is less than or equal to the page size, in which +** case pages can be individually written. This routine only runs in the exceptional +** case where the page size is smaller than the sector size. */ -SQLITE_PRIVATE int sqlite3PagerWrite(DbPage *pDbPage){ - int rc = SQLITE_OK; +static SQLITE_NOINLINE int pagerWriteLargeSector(PgHdr *pPg){ + int rc = SQLITE_OK; /* Return code */ + Pgno nPageCount; /* Total number of pages in database file */ + Pgno pg1; /* First page of the sector pPg is located on. */ + int nPage = 0; /* Number of pages starting at pg1 to journal */ + int ii; /* Loop counter */ + int needSync = 0; /* True if any page has PGHDR_NEED_SYNC */ + Pager *pPager = pPg->pPager; /* The pager that owns pPg */ + Pgno nPagePerSector = (pPager->sectorSize/pPager->pageSize); - PgHdr *pPg = pDbPage; - Pager *pPager = pPg->pPager; + /* Set the doNotSpill NOSYNC bit to 1. This is because we cannot allow + ** a journal header to be written between the pages journaled by + ** this function. + */ + assert( !MEMDB ); + assert( (pPager->doNotSpill & SPILLFLAG_NOSYNC)==0 ); + pPager->doNotSpill |= SPILLFLAG_NOSYNC; - assert( (pPg->flags & PGHDR_MMAP)==0 ); - assert( pPager->eState>=PAGER_WRITER_LOCKED ); - assert( pPager->eState!=PAGER_ERROR ); - assert( assert_pager_state(pPager) ); + /* This trick assumes that both the page-size and sector-size are + ** an integer power of 2. It sets variable pg1 to the identifier + ** of the first page of the sector pPg is located on. + */ + pg1 = ((pPg->pgno-1) & ~(nPagePerSector-1)) + 1; - if( pPager->sectorSize > (u32)pPager->pageSize ){ - Pgno nPageCount; /* Total number of pages in database file */ - Pgno pg1; /* First page of the sector pPg is located on. */ - int nPage = 0; /* Number of pages starting at pg1 to journal */ - int ii; /* Loop counter */ - int needSync = 0; /* True if any page has PGHDR_NEED_SYNC */ - Pgno nPagePerSector = (pPager->sectorSize/pPager->pageSize); + nPageCount = pPager->dbSize; + if( pPg->pgno>nPageCount ){ + nPage = (pPg->pgno - pg1)+1; + }else if( (pg1+nPagePerSector-1)>nPageCount ){ + nPage = nPageCount+1-pg1; + }else{ + nPage = nPagePerSector; + } + assert(nPage>0); + assert(pg1<=pPg->pgno); + assert((pg1+nPage)>pPg->pgno); - /* Set the doNotSpill NOSYNC bit to 1. This is because we cannot allow - ** a journal header to be written between the pages journaled by - ** this function. - */ - assert( !MEMDB ); - assert( (pPager->doNotSpill & SPILLFLAG_NOSYNC)==0 ); - pPager->doNotSpill |= SPILLFLAG_NOSYNC; - - /* This trick assumes that both the page-size and sector-size are - ** an integer power of 2. It sets variable pg1 to the identifier - ** of the first page of the sector pPg is located on. - */ - pg1 = ((pPg->pgno-1) & ~(nPagePerSector-1)) + 1; - - nPageCount = pPager->dbSize; - if( pPg->pgno>nPageCount ){ - nPage = (pPg->pgno - pg1)+1; - }else if( (pg1+nPagePerSector-1)>nPageCount ){ - nPage = nPageCount+1-pg1; - }else{ - nPage = nPagePerSector; - } - assert(nPage>0); - assert(pg1<=pPg->pgno); - assert((pg1+nPage)>pPg->pgno); - - for(ii=0; iipgno || !sqlite3BitvecTest(pPager->pInJournal, pg) ){ - if( pg!=PAGER_MJ_PGNO(pPager) ){ - rc = sqlite3PagerGet(pPager, pg, &pPage); - if( rc==SQLITE_OK ){ - rc = pager_write(pPage); - if( pPage->flags&PGHDR_NEED_SYNC ){ - needSync = 1; - } - sqlite3PagerUnrefNotNull(pPage); + for(ii=0; iipgno || !sqlite3BitvecTest(pPager->pInJournal, pg) ){ + if( pg!=PAGER_MJ_PGNO(pPager) ){ + rc = sqlite3PagerGet(pPager, pg, &pPage); + if( rc==SQLITE_OK ){ + rc = pager_write(pPage); + if( pPage->flags&PGHDR_NEED_SYNC ){ + needSync = 1; } + sqlite3PagerUnrefNotNull(pPage); } - }else if( (pPage = pager_lookup(pPager, pg))!=0 ){ - if( pPage->flags&PGHDR_NEED_SYNC ){ - needSync = 1; - } - sqlite3PagerUnrefNotNull(pPage); } + }else if( (pPage = sqlite3PagerLookup(pPager, pg))!=0 ){ + if( pPage->flags&PGHDR_NEED_SYNC ){ + needSync = 1; + } + sqlite3PagerUnrefNotNull(pPage); } + } - /* If the PGHDR_NEED_SYNC flag is set for any of the nPage pages - ** starting at pg1, then it needs to be set for all of them. Because - ** writing to any of these nPage pages may damage the others, the - ** journal file must contain sync()ed copies of all of them - ** before any of them can be written out to the database file. - */ - if( rc==SQLITE_OK && needSync ){ - assert( !MEMDB ); - for(ii=0; iiflags |= PGHDR_NEED_SYNC; - sqlite3PagerUnrefNotNull(pPage); - } + /* If the PGHDR_NEED_SYNC flag is set for any of the nPage pages + ** starting at pg1, then it needs to be set for all of them. Because + ** writing to any of these nPage pages may damage the others, the + ** journal file must contain sync()ed copies of all of them + ** before any of them can be written out to the database file. + */ + if( rc==SQLITE_OK && needSync ){ + assert( !MEMDB ); + for(ii=0; iiflags |= PGHDR_NEED_SYNC; + sqlite3PagerUnrefNotNull(pPage); } } + } - assert( (pPager->doNotSpill & SPILLFLAG_NOSYNC)!=0 ); - pPager->doNotSpill &= ~SPILLFLAG_NOSYNC; + assert( (pPager->doNotSpill & SPILLFLAG_NOSYNC)!=0 ); + pPager->doNotSpill &= ~SPILLFLAG_NOSYNC; + return rc; +} + +/* +** Mark a data page as writeable. This routine must be called before +** making changes to a page. The caller must check the return value +** of this function and be careful not to change any page data unless +** this routine returns SQLITE_OK. +** +** The difference between this function and pager_write() is that this +** function also deals with the special case where 2 or more pages +** fit on a single disk sector. In this case all co-resident pages +** must have been written to the journal file before returning. +** +** If an error occurs, SQLITE_NOMEM or an IO error code is returned +** as appropriate. Otherwise, SQLITE_OK. +*/ +SQLITE_PRIVATE int sqlite3PagerWrite(PgHdr *pPg){ + assert( (pPg->flags & PGHDR_MMAP)==0 ); + assert( pPg->pPager->eState>=PAGER_WRITER_LOCKED ); + assert( pPg->pPager->eState!=PAGER_ERROR ); + assert( assert_pager_state(pPg->pPager) ); + if( pPg->pPager->sectorSize > (u32)pPg->pPager->pageSize ){ + return pagerWriteLargeSector(pPg); }else{ - rc = pager_write(pDbPage); + return pager_write(pPg); } - return rc; } /* @@ -45819,6 +47545,7 @@ } PAGERTRACE(("COMMIT %d\n", PAGERID(pPager))); + pPager->iDataVersion++; rc = pager_end_transaction(pPager, pPager->setMaster, 1); return pager_error(pPager, rc); } @@ -46299,7 +48026,7 @@ ** for the page moved there. */ pPg->flags &= ~PGHDR_NEED_SYNC; - pPgOld = pager_lookup(pPager, pgno); + pPgOld = sqlite3PagerLookup(pPager, pgno); assert( !pPgOld || pPgOld->nRef==1 ); if( pPgOld ){ pPg->flags |= (pPgOld->flags&PGHDR_NEED_SYNC); @@ -46360,6 +48087,18 @@ #endif /* +** The page handle passed as the first argument refers to a dirty page +** with a page number other than iNew. This function changes the page's +** page number to iNew and sets the value of the PgHdr.flags field to +** the value passed as the third parameter. +*/ +SQLITE_PRIVATE void sqlite3PagerRekey(DbPage *pPg, Pgno iNew, u16 flags){ + assert( pPg->pgno!=iNew ); + pPg->flags = flags; + sqlite3PcacheMove(pPg, iNew); +} + +/* ** Return a pointer to the data for the specified page. */ SQLITE_PRIVATE void *sqlite3PagerGetData(DbPage *pPg){ @@ -46575,7 +48314,8 @@ int rc = SQLITE_OK; if( pPager->pWal ){ rc = sqlite3WalCheckpoint(pPager->pWal, eMode, - pPager->xBusyHandler, pPager->pBusyHandlerArg, + (eMode==SQLITE_CHECKPOINT_PASSIVE ? 0 : pPager->xBusyHandler), + pPager->pBusyHandlerArg, pPager->ckptSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace, pnLog, pnCkpt ); @@ -46752,11 +48492,12 @@ ** is empty, return 0. */ SQLITE_PRIVATE int sqlite3PagerWalFramesize(Pager *pPager){ - assert( pPager->eState==PAGER_READER ); + assert( pPager->eState>=PAGER_READER ); return sqlite3WalFramesize(pPager->pWal); } #endif + #endif /* SQLITE_OMIT_DISKIO */ /************** End of pager.c ***********************************************/ @@ -47336,7 +49077,7 @@ ** The argument to this macro must be of type u32. On a little-endian ** architecture, it returns the u32 value that results from interpreting ** the 4 bytes as a big-endian value. On a big-endian architecture, it -** returns the value that would be produced by intepreting the 4 bytes +** returns the value that would be produced by interpreting the 4 bytes ** of the input value as a little-endian integer. */ #define BYTESWAP32(x) ( \ @@ -47750,7 +49491,7 @@ assert( idx <= HASHTABLE_NSLOT/2 + 1 ); /* If this is the first entry to be added to this hash-table, zero the - ** entire hash table and aPgno[] array before proceding. + ** entire hash table and aPgno[] array before proceeding. */ if( idx==1 ){ int nByte = (int)((u8 *)&aHash[HASHTABLE_NSLOT] - (u8 *)&aPgno[1]); @@ -48266,7 +50007,7 @@ ** Free an iterator allocated by walIteratorInit(). */ static void walIteratorFree(WalIterator *p){ - sqlite3ScratchFree(p); + sqlite3_free(p); } /* @@ -48301,7 +50042,7 @@ nByte = sizeof(WalIterator) + (nSegment-1)*sizeof(struct WalSegment) + iLast*sizeof(ht_slot); - p = (WalIterator *)sqlite3ScratchMalloc(nByte); + p = (WalIterator *)sqlite3_malloc(nByte); if( !p ){ return SQLITE_NOMEM; } @@ -48311,7 +50052,7 @@ /* Allocate temporary space used by the merge-sort routine. This block ** of memory will be freed before this function returns. */ - aTmp = (ht_slot *)sqlite3ScratchMalloc( + aTmp = (ht_slot *)sqlite3_malloc( sizeof(ht_slot) * (iLast>HASHTABLE_NPAGE?HASHTABLE_NPAGE:iLast) ); if( !aTmp ){ @@ -48348,7 +50089,7 @@ p->aSegment[i].aPgno = (u32 *)aPgno; } } - sqlite3ScratchFree(aTmp); + sqlite3_free(aTmp); if( rc!=SQLITE_OK ){ walIteratorFree(p); @@ -48386,6 +50127,38 @@ } /* +** The following is guaranteed when this function is called: +** +** a) the WRITER lock is held, +** b) the entire log file has been checkpointed, and +** c) any existing readers are reading exclusively from the database +** file - there are no readers that may attempt to read a frame from +** the log file. +** +** This function updates the shared-memory structures so that the next +** client to write to the database (which may be this one) does so by +** writing frames into the start of the log file. +** +** The value of parameter salt1 is used as the aSalt[1] value in the +** new wal-index header. It should be passed a pseudo-random value (i.e. +** one obtained from sqlite3_randomness()). +*/ +static void walRestartHdr(Wal *pWal, u32 salt1){ + volatile WalCkptInfo *pInfo = walCkptInfo(pWal); + int i; /* Loop counter */ + u32 *aSalt = pWal->hdr.aSalt; /* Big-endian salt values */ + pWal->nCkpt++; + pWal->hdr.mxFrame = 0; + sqlite3Put4byte((u8*)&aSalt[0], 1 + sqlite3Get4byte((u8*)&aSalt[0])); + memcpy(&pWal->hdr.aSalt[1], &salt1, 4); + walIndexWriteHdr(pWal); + pInfo->nBackfill = 0; + pInfo->aReadMark[1] = 0; + for(i=2; iaReadMark[i] = READMARK_NOT_USED; + assert( pInfo->aReadMark[0]==0 ); +} + +/* ** Copy as much content as we can from the WAL back into the database file ** in response to an sqlite3_wal_checkpoint() request or the equivalent. ** @@ -48408,7 +50181,7 @@ ** database file. ** ** This routine uses and updates the nBackfill field of the wal-index header. -** This is the only routine tha will increase the value of nBackfill. +** This is the only routine that will increase the value of nBackfill. ** (A WAL reset or recovery will revert nBackfill to zero, but not increase ** its value.) ** @@ -48419,7 +50192,7 @@ static int walCheckpoint( Wal *pWal, /* Wal connection */ int eMode, /* One of PASSIVE, FULL or RESTART */ - int (*xBusyCall)(void*), /* Function to call when busy */ + int (*xBusy)(void*), /* Function to call when busy */ void *pBusyArg, /* Context argument for xBusyHandler */ int sync_flags, /* Flags for OsSync() (or 0) */ u8 *zBuf /* Temporary buffer to use */ @@ -48433,7 +50206,6 @@ u32 mxPage; /* Max database page to write */ int i; /* Loop counter */ volatile WalCkptInfo *pInfo; /* The checkpoint status information */ - int (*xBusy)(void*) = 0; /* Function to call when waiting for locks */ szPage = walPagesize(pWal); testcase( szPage<=32768 ); @@ -48448,7 +50220,9 @@ } assert( pIter ); - if( eMode!=SQLITE_CHECKPOINT_PASSIVE ) xBusy = xBusyCall; + /* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked + ** in the SQLITE_CHECKPOINT_PASSIVE mode. */ + assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 ); /* Compute in mxSafeFrame the index of the last frame of the WAL that is ** safe to write into the database. Frames beyond mxSafeFrame might @@ -48537,19 +50311,38 @@ rc = SQLITE_OK; } - /* If this is an SQLITE_CHECKPOINT_RESTART operation, and the entire wal - ** file has been copied into the database file, then block until all - ** readers have finished using the wal file. This ensures that the next - ** process to write to the database restarts the wal file. + /* If this is an SQLITE_CHECKPOINT_RESTART or TRUNCATE operation, and the + ** entire wal file has been copied into the database file, then block + ** until all readers have finished using the wal file. This ensures that + ** the next process to write to the database restarts the wal file. */ if( rc==SQLITE_OK && eMode!=SQLITE_CHECKPOINT_PASSIVE ){ assert( pWal->writeLock ); if( pInfo->nBackfillhdr.mxFrame ){ rc = SQLITE_BUSY; - }else if( eMode==SQLITE_CHECKPOINT_RESTART ){ + }else if( eMode>=SQLITE_CHECKPOINT_RESTART ){ + u32 salt1; + sqlite3_randomness(4, &salt1); assert( mxSafeFrame==pWal->hdr.mxFrame ); rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(1), WAL_NREADER-1); if( rc==SQLITE_OK ){ + if( eMode==SQLITE_CHECKPOINT_TRUNCATE ){ + /* IMPLEMENTATION-OF: R-44699-57140 This mode works the same way as + ** SQLITE_CHECKPOINT_RESTART with the addition that it also + ** truncates the log file to zero bytes just prior to a + ** successful return. + ** + ** In theory, it might be safe to do this without updating the + ** wal-index header in shared memory, as all subsequent reader or + ** writer clients should see that the entire log file has been + ** checkpointed and behave accordingly. This seems unsafe though, + ** as it would leave the system in a state where the contents of + ** the wal-index header do not match the contents of the + ** file-system. To avoid this, update the wal-index header to + ** indicate that the log file contains zero valid frames. */ + walRestartHdr(pWal, salt1); + rc = sqlite3OsTruncate(pWal->pWalFd, 0); + } walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1); } } @@ -48712,7 +50505,7 @@ ** wal-index from the WAL before returning. ** ** Set *pChanged to 1 if the wal-index header value in pWal->hdr is -** changed by this opertion. If pWal->hdr is unchanged, set *pChanged +** changed by this operation. If pWal->hdr is unchanged, set *pChanged ** to 0. ** ** If the wal-index header is successfully read, return SQLITE_OK. @@ -48858,16 +50651,16 @@ ** calls to sqlite3OsSleep() have a delay of 1 microsecond. Really this ** is more of a scheduler yield than an actual delay. But on the 10th ** an subsequent retries, the delays start becoming longer and longer, - ** so that on the 100th (and last) RETRY we delay for 21 milliseconds. - ** The total delay time before giving up is less than 1 second. + ** so that on the 100th (and last) RETRY we delay for 323 milliseconds. + ** The total delay time before giving up is less than 10 seconds. */ if( cnt>5 ){ int nDelay = 1; /* Pause time in microseconds */ if( cnt>100 ){ VVA_ONLY( pWal->lockError = 1; ) return SQLITE_PROTOCOL; } - if( cnt>=10 ) nDelay = (cnt-9)*238; /* Max delay 21ms. Total delay 996ms */ + if( cnt>=10 ) nDelay = (cnt-9)*(cnt-9)*39; sqlite3OsSleep(pWal->pVfs, nDelay); } @@ -48916,7 +50709,7 @@ ** may have been appended to the log before READ_LOCK(0) was obtained. ** When holding READ_LOCK(0), the reader ignores the entire log file, ** which implies that the database file contains a trustworthy - ** snapshoT. Since holding READ_LOCK(0) prevents a checkpoint from + ** snapshot. Since holding READ_LOCK(0) prevents a checkpoint from ** happening, this is usually correct. ** ** However, if frames have been appended to the log (or if the log @@ -49122,7 +50915,7 @@ for(iKey=walHash(pgno); aHash[iKey]; iKey=walNextHash(iKey)){ u32 iFrame = aHash[iKey] + iZero; if( iFrame<=iLast && aPgno[aHash[iKey]]==pgno ){ - /* assert( iFrame>iRead ); -- not true if there is corruption */ + assert( iFrame>iRead || CORRUPT_DB ); iRead = iFrame; } if( (nCollide--)==0 ){ @@ -49287,7 +51080,6 @@ } if( iMax!=pWal->hdr.mxFrame ) walCleanupHash(pWal); } - assert( rc==SQLITE_OK ); return rc; } @@ -49336,7 +51128,6 @@ return rc; } - /* ** This function is called just before writing a set of frames to the log ** file (see sqlite3WalFrames()). It checks to see if, instead of appending @@ -49369,20 +51160,8 @@ ** In theory it would be Ok to update the cache of the header only ** at this point. But updating the actual wal-index header is also ** safe and means there is no special case for sqlite3WalUndo() - ** to handle if this transaction is rolled back. - */ - int i; /* Loop counter */ - u32 *aSalt = pWal->hdr.aSalt; /* Big-endian salt values */ - - pWal->nCkpt++; - pWal->hdr.mxFrame = 0; - sqlite3Put4byte((u8*)&aSalt[0], 1 + sqlite3Get4byte((u8*)&aSalt[0])); - aSalt[1] = salt1; - walIndexWriteHdr(pWal); - pInfo->nBackfill = 0; - pInfo->aReadMark[1] = 0; - for(i=2; iaReadMark[i] = READMARK_NOT_USED; - assert( pInfo->aReadMark[0]==0 ); + ** to handle if this transaction is rolled back. */ + walRestartHdr(pWal, salt1); walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1); }else if( rc!=SQLITE_BUSY ){ return rc; @@ -49584,7 +51363,7 @@ ** ** Padding and syncing only occur if this set of frames complete a ** transaction and if PRAGMA synchronous=FULL. If synchronous==NORMAL - ** or synchonous==OFF, then no padding or syncing are needed. + ** or synchronous==OFF, then no padding or syncing are needed. ** ** If SQLITE_IOCAP_POWERSAFE_OVERWRITE is defined, then padding is not ** needed and only the sync is done. If padding is needed, then the @@ -49670,7 +51449,7 @@ */ SQLITE_PRIVATE int sqlite3WalCheckpoint( Wal *pWal, /* Wal connection */ - int eMode, /* PASSIVE, FULL or RESTART */ + int eMode, /* PASSIVE, FULL, RESTART, or TRUNCATE */ int (*xBusy)(void*), /* Function to call when busy */ void *pBusyArg, /* Context argument for xBusyHandler */ int sync_flags, /* Flags to sync db file with (or 0) */ @@ -49682,36 +51461,50 @@ int rc; /* Return code */ int isChanged = 0; /* True if a new wal-index header is loaded */ int eMode2 = eMode; /* Mode to pass to walCheckpoint() */ + int (*xBusy2)(void*) = xBusy; /* Busy handler for eMode2 */ assert( pWal->ckptLock==0 ); assert( pWal->writeLock==0 ); + /* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked + ** in the SQLITE_CHECKPOINT_PASSIVE mode. */ + assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 ); + if( pWal->readOnly ) return SQLITE_READONLY; WALTRACE(("WAL%p: checkpoint begins\n", pWal)); + + /* IMPLEMENTATION-OF: R-62028-47212 All calls obtain an exclusive + ** "checkpoint" lock on the database file. */ rc = walLockExclusive(pWal, WAL_CKPT_LOCK, 1); if( rc ){ - /* Usually this is SQLITE_BUSY meaning that another thread or process - ** is already running a checkpoint, or maybe a recovery. But it might - ** also be SQLITE_IOERR. */ + /* EVIDENCE-OF: R-10421-19736 If any other process is running a + ** checkpoint operation at the same time, the lock cannot be obtained and + ** SQLITE_BUSY is returned. + ** EVIDENCE-OF: R-53820-33897 Even if there is a busy-handler configured, + ** it will not be invoked in this case. + */ + testcase( rc==SQLITE_BUSY ); + testcase( xBusy!=0 ); return rc; } pWal->ckptLock = 1; - /* If this is a blocking-checkpoint, then obtain the write-lock as well - ** to prevent any writers from running while the checkpoint is underway. - ** This has to be done before the call to walIndexReadHdr() below. + /* IMPLEMENTATION-OF: R-59782-36818 The SQLITE_CHECKPOINT_FULL, RESTART and + ** TRUNCATE modes also obtain the exclusive "writer" lock on the database + ** file. ** - ** If the writer lock cannot be obtained, then a passive checkpoint is - ** run instead. Since the checkpointer is not holding the writer lock, - ** there is no point in blocking waiting for any readers. Assuming no - ** other error occurs, this function will return SQLITE_BUSY to the caller. + ** EVIDENCE-OF: R-60642-04082 If the writer lock cannot be obtained + ** immediately, and a busy-handler is configured, it is invoked and the + ** writer lock retried until either the busy-handler returns 0 or the + ** lock is successfully obtained. */ if( eMode!=SQLITE_CHECKPOINT_PASSIVE ){ rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_WRITE_LOCK, 1); if( rc==SQLITE_OK ){ pWal->writeLock = 1; }else if( rc==SQLITE_BUSY ){ eMode2 = SQLITE_CHECKPOINT_PASSIVE; + xBusy2 = 0; rc = SQLITE_OK; } } @@ -49729,7 +51522,7 @@ if( pWal->hdr.mxFrame && walPagesize(pWal)!=nBuf ){ rc = SQLITE_CORRUPT_BKPT; }else{ - rc = walCheckpoint(pWal, eMode2, xBusy, pBusyArg, sync_flags, zBuf); + rc = walCheckpoint(pWal, eMode2, xBusy2, pBusyArg, sync_flags, zBuf); } /* If no error occurred, set the output variables. */ @@ -49887,7 +51680,7 @@ ** May you share freely, never taking more than you give. ** ************************************************************************* -** This file implements a external (disk-based) database using BTrees. +** This file implements an external (disk-based) database using BTrees. ** For a detailed discussion of BTrees, refer to ** ** Donald E. Knuth, THE ART OF COMPUTER PROGRAMMING, Volume 3: @@ -50013,7 +51806,7 @@ ** ** The flags define the format of this btree page. The leaf flag means that ** this page has no children. The zerodata flag means that this page carries -** only keys and no data. The intkey flag means that the key is a integer +** only keys and no data. The intkey flag means that the key is an integer ** which is stored in the key size entry of the cell header rather than in ** the payload area. ** @@ -50150,9 +51943,10 @@ struct MemPage { u8 isInit; /* True if previously initialized. MUST BE FIRST! */ u8 nOverflow; /* Number of overflow cell bodies in aCell[] */ - u8 intKey; /* True if intkey flag is set */ - u8 leaf; /* True if leaf flag is set */ - u8 hasData; /* True if this page stores data */ + u8 intKey; /* True if table b-trees. False for index b-trees */ + u8 intKeyLeaf; /* True if the leaf of an intKey table */ + u8 noPayload; /* True if internal intKey page (thus w/o data) */ + u8 leaf; /* True if a leaf page */ u8 hdrOffset; /* 100 for page 1. 0 otherwise */ u8 childPtrSize; /* 0 if leaf==1. 4 if leaf==0 */ u8 max1bytePayload; /* min(maxLocal,127) */ @@ -50227,6 +52021,7 @@ u8 locked; /* True if db currently has pBt locked */ int wantToLock; /* Number of nested calls to sqlite3BtreeEnter() */ int nBackup; /* Number of backup operations reading this btree */ + u32 iDataVersion; /* Combines with pBt->pPager->iDataVersion */ Btree *pNext; /* List of other sharable Btrees from the same db */ Btree *pPrev; /* Back pointer of the same list */ #ifndef SQLITE_OMIT_SHARED_CACHE @@ -50312,7 +52107,7 @@ BtLock *pLock; /* List of locks held on this shared-btree struct */ Btree *pWriter; /* Btree with currently open write transaction */ #endif - u8 *pTmpSpace; /* BtShared.pageSize bytes of space for tmp use */ + u8 *pTmpSpace; /* Temp space sufficient to hold a single cell */ }; /* @@ -50333,12 +52128,10 @@ */ typedef struct CellInfo CellInfo; struct CellInfo { - i64 nKey; /* The key for INTKEY tables, or number of bytes in key */ - u8 *pCell; /* Pointer to the start of cell content */ - u32 nData; /* Number of bytes of data */ - u32 nPayload; /* Total amount of payload */ - u16 nHeader; /* Size of the cell content header in bytes */ - u16 nLocal; /* Amount of payload held locally */ + i64 nKey; /* The key for INTKEY tables, or nPayload otherwise */ + u8 *pPayload; /* Pointer to the start of payload */ + u32 nPayload; /* Bytes of payload */ + u16 nLocal; /* Amount of payload held locally, not on overflow */ u16 iOverflow; /* Offset to overflow page number. Zero if no overflow */ u16 nSize; /* Size of the cell content on the main b-tree page */ }; @@ -50367,34 +52160,43 @@ ** ** Fields in this structure are accessed under the BtShared.mutex ** found at self->pBt->mutex. +** +** skipNext meaning: +** eState==SKIPNEXT && skipNext>0: Next sqlite3BtreeNext() is no-op. +** eState==SKIPNEXT && skipNext<0: Next sqlite3BtreePrevious() is no-op. +** eState==FAULT: Cursor fault with skipNext as error code. */ struct BtCursor { Btree *pBtree; /* The Btree to which this cursor belongs */ BtShared *pBt; /* The BtShared this cursor points to */ BtCursor *pNext, *pPrev; /* Forms a linked list of all cursors */ struct KeyInfo *pKeyInfo; /* Argument passed to comparison function */ -#ifndef SQLITE_OMIT_INCRBLOB Pgno *aOverflow; /* Cache of overflow page locations */ -#endif - Pgno pgnoRoot; /* The root page of this tree */ CellInfo info; /* A parse of the cell we are pointing at */ - i64 nKey; /* Size of pKey, or last integer key */ - void *pKey; /* Saved key that was cursor's last known position */ - int skipNext; /* Prev() is noop if negative. Next() is noop if positive */ - u8 wrFlag; /* True if writable */ - u8 atLast; /* Cursor pointing to the last entry */ - u8 validNKey; /* True if info.nKey is valid */ + i64 nKey; /* Size of pKey, or last integer key */ + void *pKey; /* Saved key that was cursor last known position */ + Pgno pgnoRoot; /* The root page of this tree */ + int nOvflAlloc; /* Allocated size of aOverflow[] array */ + int skipNext; /* Prev() is noop if negative. Next() is noop if positive. + ** Error code if eState==CURSOR_FAULT */ + u8 curFlags; /* zero or more BTCF_* flags defined below */ u8 eState; /* One of the CURSOR_XXX constants (see below) */ -#ifndef SQLITE_OMIT_INCRBLOB - u8 isIncrblobHandle; /* True if this cursor is an incr. io handle */ -#endif u8 hints; /* As configured by CursorSetHints() */ i16 iPage; /* Index of current page in apPage */ u16 aiIdx[BTCURSOR_MAX_DEPTH]; /* Current index in apPage[i] */ MemPage *apPage[BTCURSOR_MAX_DEPTH]; /* Pages from root to current page */ }; /* +** Legal values for BtCursor.curFlags +*/ +#define BTCF_WriteFlag 0x01 /* True if a write cursor */ +#define BTCF_ValidNKey 0x02 /* True if info.nKey is valid */ +#define BTCF_ValidOvfl 0x04 /* True if aOverflow is valid */ +#define BTCF_AtLast 0x08 /* Cursor is pointing ot the last entry */ +#define BTCF_Incrblob 0x10 /* True if an incremental I/O handle */ + +/* ** Potential values for BtCursor.eState. ** ** CURSOR_INVALID: @@ -50418,11 +52220,11 @@ ** seek the cursor to the saved position. ** ** CURSOR_FAULT: -** A unrecoverable error (an I/O error or a malloc failure) has occurred +** An unrecoverable error (an I/O error or a malloc failure) has occurred ** on a different connection that shares the BtShared cache with this ** cursor. The error has left the cache in an inconsistent state. ** Do nothing else with this cursor. Any attempt to use the cursor -** should return the error code stored in BtCursor.skip +** should return the error code stored in BtCursor.skipNext */ #define CURSOR_INVALID 0 #define CURSOR_VALID 1 @@ -50532,6 +52334,8 @@ int mxErr; /* Stop accumulating errors when this reaches zero */ int nErr; /* Number of messages written to zErrMsg so far */ int mallocFailed; /* A memory allocation error has occurred */ + const char *zPfx; /* Error message prefix */ + int v1, v2; /* Values for up to two %d fields in zPfx */ StrAccum errMsg; /* Accumulate the error message text here */ }; @@ -50567,7 +52371,7 @@ ** Release the BtShared mutex associated with B-Tree handle p and ** clear the p->locked boolean. */ -static void unlockBtreeMutex(Btree *p){ +static void SQLITE_NOINLINE unlockBtreeMutex(Btree *p){ BtShared *pBt = p->pBt; assert( p->locked==1 ); assert( sqlite3_mutex_held(pBt->mutex) ); @@ -50578,6 +52382,9 @@ p->locked = 0; } +/* Forward reference */ +static void SQLITE_NOINLINE btreeLockCarefully(Btree *p); + /* ** Enter a mutex on the given BTree object. ** @@ -50595,8 +52402,6 @@ ** subsequent Btrees that desire a lock. */ SQLITE_PRIVATE void sqlite3BtreeEnter(Btree *p){ - Btree *pLater; - /* Some basic sanity checking on the Btree. The list of Btrees ** connected by pNext and pPrev should be in sorted order by ** Btree.pBt value. All elements of the list should belong to @@ -50621,9 +52426,20 @@ if( !p->sharable ) return; p->wantToLock++; if( p->locked ) return; + btreeLockCarefully(p); +} +/* This is a helper function for sqlite3BtreeLock(). By moving +** complex, but seldom used logic, out of sqlite3BtreeLock() and +** into this routine, we avoid unnecessary stack pointer changes +** and thus help the sqlite3BtreeLock() routine to run much faster +** in the common case. +*/ +static void SQLITE_NOINLINE btreeLockCarefully(Btree *p){ + Btree *pLater; + /* In most cases, we should be able to acquire the lock we - ** want without having to go throught the ascending lock + ** want without having to go through the ascending lock ** procedure that follows. Just be sure not to block. */ if( sqlite3_mutex_try(p->pBt->mutex)==SQLITE_OK ){ @@ -50653,6 +52469,7 @@ } } + /* ** Exit the recursive mutex on a Btree. */ @@ -50828,7 +52645,7 @@ ** May you share freely, never taking more than you give. ** ************************************************************************* -** This file implements a external (disk-based) database using BTrees. +** This file implements an external (disk-based) database using BTrees. ** See the header comment on "btreeInt.h" for additional information. ** Including a description of file format and an overview of operation. */ @@ -50980,7 +52797,7 @@ ** the correct locks are held. So do not bother - just return true. ** This case does not come up very often anyhow. */ - if( isIndex && (!pSchema || (pSchema->flags&DB_SchemaLoaded)==0) ){ + if( isIndex && (!pSchema || (pSchema->schemaFlags&DB_SchemaLoaded)==0) ){ return 1; } @@ -51264,16 +53081,11 @@ } #endif - -#ifndef SQLITE_OMIT_INCRBLOB /* -** Invalidate the overflow page-list cache for cursor pCur, if any. +** Invalidate the overflow cache of the cursor passed as the first argument. +** on the shared btree structure pBt. */ -static void invalidateOverflowCache(BtCursor *pCur){ - assert( cursorHoldsMutex(pCur) ); - sqlite3_free(pCur->aOverflow); - pCur->aOverflow = 0; -} +#define invalidateOverflowCache(pCur) (pCur->curFlags &= ~BTCF_ValidOvfl) /* ** Invalidate the overflow page-list cache for all cursors opened @@ -51287,6 +53099,7 @@ } } +#ifndef SQLITE_OMIT_INCRBLOB /* ** This function is called before modifying the contents of a table ** to invalidate any incrblob cursors that are open on the @@ -51309,16 +53122,16 @@ BtShared *pBt = pBtree->pBt; assert( sqlite3BtreeHoldsMutex(pBtree) ); for(p=pBt->pCursor; p; p=p->pNext){ - if( p->isIncrblobHandle && (isClearTable || p->info.nKey==iRow) ){ + if( (p->curFlags & BTCF_Incrblob)!=0 + && (isClearTable || p->info.nKey==iRow) + ){ p->eState = CURSOR_INVALID; } } } #else - /* Stub functions when INCRBLOB is omitted */ - #define invalidateOverflowCache(x) - #define invalidateAllOverflowCache(x) + /* Stub function when INCRBLOB is omitted */ #define invalidateIncrblobCursors(x,y,z) #endif /* SQLITE_OMIT_INCRBLOB */ @@ -51430,7 +53243,7 @@ ** data. */ if( 0==pCur->apPage[0]->intKey ){ - void *pKey = sqlite3Malloc( (int)pCur->nKey ); + void *pKey = sqlite3Malloc( pCur->nKey ); if( pKey ){ rc = sqlite3BtreeKey(pCur, 0, (int)pCur->nKey, pKey); if( rc==SQLITE_OK ){ @@ -51453,16 +53266,42 @@ return rc; } +/* Forward reference */ +static int SQLITE_NOINLINE saveCursorsOnList(BtCursor*,Pgno,BtCursor*); + /* ** Save the positions of all cursors (except pExcept) that are open on -** the table with root-page iRoot. Usually, this is called just before cursor -** pExcept is used to modify the table (BtreeDelete() or BtreeInsert()). +** the table with root-page iRoot. "Saving the cursor position" means that +** the location in the btree is remembered in such a way that it can be +** moved back to the same spot after the btree has been modified. This +** routine is called just before cursor pExcept is used to modify the +** table, for example in BtreeDelete() or BtreeInsert(). +** +** Implementation note: This routine merely checks to see if any cursors +** need to be saved. It calls out to saveCursorsOnList() in the (unusual) +** event that cursors are in need to being saved. */ static int saveAllCursors(BtShared *pBt, Pgno iRoot, BtCursor *pExcept){ BtCursor *p; assert( sqlite3_mutex_held(pBt->mutex) ); assert( pExcept==0 || pExcept->pBt==pBt ); for(p=pBt->pCursor; p; p=p->pNext){ + if( p!=pExcept && (0==iRoot || p->pgnoRoot==iRoot) ) break; + } + return p ? saveCursorsOnList(p, iRoot, pExcept) : SQLITE_OK; +} + +/* This helper routine to saveAllCursors does the actual work of saving +** the cursors if and when a cursor is found that actually requires saving. +** The common case is that no cursors need to be saved, so this routine is +** broken out from its caller to avoid unnecessary stack pointer movement. +*/ +static int SQLITE_NOINLINE saveCursorsOnList( + BtCursor *p, /* The first cursor that needs saving */ + Pgno iRoot, /* Only save cursor with this iRoot. Save all if zero */ + BtCursor *pExcept /* Do not save this cursor */ +){ + do{ if( p!=pExcept && (0==iRoot || p->pgnoRoot==iRoot) ){ if( p->eState==CURSOR_VALID ){ int rc = saveCursorPosition(p); @@ -51474,7 +53313,8 @@ btreeReleaseAllCursorPages(p); } } - } + p = p->pNext; + }while( p ); return SQLITE_OK; } @@ -51559,25 +53399,48 @@ SQLITE_OK) /* -** Determine whether or not a cursor has moved from the position it -** was last placed at. Cursors can move when the row they are pointing -** at is deleted out from under them. +** Determine whether or not a cursor has moved from the position where +** it was last placed, or has been invalidated for any other reason. +** Cursors can move when the row they are pointing at is deleted out +** from under them, for example. Cursor might also move if a btree +** is rebalanced. ** -** This routine returns an error code if something goes wrong. The -** integer *pHasMoved is set to one if the cursor has moved and 0 if not. +** Calling this routine with a NULL cursor pointer returns false. +** +** Use the separate sqlite3BtreeCursorRestore() routine to restore a cursor +** back to where it ought to be if this routine returns true. */ -SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor *pCur, int *pHasMoved){ +SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor *pCur){ + return pCur->eState!=CURSOR_VALID; +} + +/* +** This routine restores a cursor back to its original position after it +** has been moved by some outside activity (such as a btree rebalance or +** a row having been deleted out from under the cursor). +** +** On success, the *pDifferentRow parameter is false if the cursor is left +** pointing at exactly the same row. *pDifferntRow is the row the cursor +** was pointing to has been deleted, forcing the cursor to point to some +** nearby row. +** +** This routine should only be called for a cursor that just returned +** TRUE from sqlite3BtreeCursorHasMoved(). +*/ +SQLITE_PRIVATE int sqlite3BtreeCursorRestore(BtCursor *pCur, int *pDifferentRow){ int rc; + assert( pCur!=0 ); + assert( pCur->eState!=CURSOR_VALID ); rc = restoreCursorPosition(pCur); if( rc ){ - *pHasMoved = 1; + *pDifferentRow = 1; return rc; } if( pCur->eState!=CURSOR_VALID || NEVER(pCur->skipNext!=0) ){ - *pHasMoved = 1; + *pDifferentRow = 1; }else{ - *pHasMoved = 0; + *pDifferentRow = 0; } return SQLITE_OK; } @@ -51742,47 +53605,44 @@ ** are two versions of this function. btreeParseCell() takes a ** cell index as the second argument and btreeParseCellPtr() ** takes a pointer to the body of the cell as its second argument. -** -** Within this file, the parseCell() macro can be called instead of -** btreeParseCellPtr(). Using some compilers, this will be faster. */ static void btreeParseCellPtr( MemPage *pPage, /* Page containing the cell */ u8 *pCell, /* Pointer to the cell text. */ CellInfo *pInfo /* Fill in this structure */ ){ - u16 n; /* Number bytes in cell content header */ + u8 *pIter; /* For scanning through pCell */ u32 nPayload; /* Number of bytes of cell payload */ assert( sqlite3_mutex_held(pPage->pBt->mutex) ); - - pInfo->pCell = pCell; assert( pPage->leaf==0 || pPage->leaf==1 ); - n = pPage->childPtrSize; - assert( n==4-4*pPage->leaf ); - if( pPage->intKey ){ - if( pPage->hasData ){ - assert( n==0 ); - n = getVarint32(pCell, nPayload); - }else{ - nPayload = 0; - } - n += getVarint(&pCell[n], (u64*)&pInfo->nKey); - pInfo->nData = nPayload; + if( pPage->intKeyLeaf ){ + assert( pPage->childPtrSize==0 ); + pIter = pCell + getVarint32(pCell, nPayload); + pIter += getVarint(pIter, (u64*)&pInfo->nKey); + }else if( pPage->noPayload ){ + assert( pPage->childPtrSize==4 ); + pInfo->nSize = 4 + getVarint(&pCell[4], (u64*)&pInfo->nKey); + pInfo->nPayload = 0; + pInfo->nLocal = 0; + pInfo->iOverflow = 0; + pInfo->pPayload = 0; + return; }else{ - pInfo->nData = 0; - n += getVarint32(&pCell[n], nPayload); + pIter = pCell + pPage->childPtrSize; + pIter += getVarint32(pIter, nPayload); pInfo->nKey = nPayload; } pInfo->nPayload = nPayload; - pInfo->nHeader = n; + pInfo->pPayload = pIter; testcase( nPayload==pPage->maxLocal ); testcase( nPayload==pPage->maxLocal+1 ); - if( likely(nPayload<=pPage->maxLocal) ){ + if( nPayload<=pPage->maxLocal ){ /* This is the (easy) common case where the entire payload fits ** on the local page. No overflow is required. */ - if( (pInfo->nSize = (u16)(n+nPayload))<4 ) pInfo->nSize = 4; + pInfo->nSize = nPayload + (u16)(pIter - pCell); + if( pInfo->nSize<4 ) pInfo->nSize = 4; pInfo->nLocal = (u16)nPayload; pInfo->iOverflow = 0; }else{ @@ -51809,18 +53669,16 @@ }else{ pInfo->nLocal = (u16)minLocal; } - pInfo->iOverflow = (u16)(pInfo->nLocal + n); + pInfo->iOverflow = (u16)(&pInfo->pPayload[pInfo->nLocal] - pCell); pInfo->nSize = pInfo->iOverflow + 4; } } -#define parseCell(pPage, iCell, pInfo) \ - btreeParseCellPtr((pPage), findCell((pPage), (iCell)), (pInfo)) static void btreeParseCell( MemPage *pPage, /* Page containing the cell */ int iCell, /* The cell index. First cell is 0 */ CellInfo *pInfo /* Fill in this structure */ ){ - parseCell(pPage, iCell, pInfo); + btreeParseCellPtr(pPage, findCell(pPage, iCell), pInfo); } /* @@ -51830,8 +53688,9 @@ ** the space used by the cell pointer. */ static u16 cellSizePtr(MemPage *pPage, u8 *pCell){ - u8 *pIter = &pCell[pPage->childPtrSize]; - u32 nSize; + u8 *pIter = pCell + pPage->childPtrSize; /* For looping over bytes of pCell */ + u8 *pEnd; /* End mark for a varint */ + u32 nSize; /* Size value to return */ #ifdef SQLITE_DEBUG /* The value returned by this function should always be the same as @@ -51842,43 +53701,44 @@ btreeParseCellPtr(pPage, pCell, &debuginfo); #endif + if( pPage->noPayload ){ + pEnd = &pIter[9]; + while( (*pIter++)&0x80 && pIterchildPtrSize==4 ); + return (u16)(pIter - pCell); + } + nSize = *pIter; + if( nSize>=0x80 ){ + pEnd = &pIter[9]; + nSize &= 0x7f; + do{ + nSize = (nSize<<7) | (*++pIter & 0x7f); + }while( *(pIter)>=0x80 && pIterintKey ){ - u8 *pEnd; - if( pPage->hasData ){ - pIter += getVarint32(pIter, nSize); - }else{ - nSize = 0; - } - /* pIter now points at the 64-bit integer key value, a variable length ** integer. The following block moves pIter to point at the first byte ** past the end of the key value. */ pEnd = &pIter[9]; while( (*pIter++)&0x80 && pItermaxLocal ); testcase( nSize==pPage->maxLocal+1 ); - if( nSize>pPage->maxLocal ){ + if( nSize<=pPage->maxLocal ){ + nSize += (u32)(pIter - pCell); + if( nSize<4 ) nSize = 4; + }else{ int minLocal = pPage->minLocal; nSize = minLocal + (nSize - minLocal) % (pPage->pBt->usableSize - 4); testcase( nSize==pPage->maxLocal ); testcase( nSize==pPage->maxLocal+1 ); if( nSize>pPage->maxLocal ){ nSize = minLocal; } - nSize += 4; + nSize += 4 + (u16)(pIter - pCell); } - nSize += (u32)(pIter - pCell); - - /* The minimum size of any cell is 4 bytes. */ - if( nSize<4 ){ - nSize = 4; - } - - assert( nSize==debuginfo.nSize ); + assert( nSize==debuginfo.nSize || CORRUPT_DB ); return (u16)nSize; } @@ -51901,7 +53761,6 @@ if( *pRC ) return; assert( pCell!=0 ); btreeParseCellPtr(pPage, pCell, &info); - assert( (info.nData+(pPage->intKey?0:info.nKey))==info.nPayload ); if( info.iOverflow ){ Pgno ovfl = get4byte(&pCell[info.iOverflow]); ptrmapPut(pPage->pBt, ovfl, PTRMAP_OVERFLOW1, pPage->pgno, pRC); @@ -51915,10 +53774,15 @@ ** end of the page and all free space is collected into one ** big FreeBlk that occurs in between the header and cell ** pointer array and the cell content area. +** +** EVIDENCE-OF: R-44582-60138 SQLite may from time to time reorganize a +** b-tree page so that there are no freeblocks or fragment bytes, all +** unused bytes are contained in the unallocated space region, and all +** cells are packed tightly at the end of the page. */ static int defragmentPage(MemPage *pPage){ int i; /* Loop counter */ - int pc; /* Address of a i-th cell */ + int pc; /* Address of the i-th cell */ int hdr; /* Offset to the page header */ int size; /* Size of a cell */ int usableSize; /* Number of usable bytes on a page */ @@ -51927,6 +53791,7 @@ int nCell; /* Number of cells on the page */ unsigned char *data; /* The page data */ unsigned char *temp; /* Temp area for cell content */ + unsigned char *src; /* Source of content */ int iCellFirst; /* First allowable cell index */ int iCellLast; /* Last possible cell index */ @@ -51936,15 +53801,13 @@ assert( pPage->pBt->usableSize <= SQLITE_MAX_PAGE_SIZE ); assert( pPage->nOverflow==0 ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); - temp = sqlite3PagerTempSpace(pPage->pBt->pPager); - data = pPage->aData; + temp = 0; + src = data = pPage->aData; hdr = pPage->hdrOffset; cellOffset = pPage->cellOffset; nCell = pPage->nCell; assert( nCell==get2byte(&data[hdr+3]) ); usableSize = pPage->pBt->usableSize; - cbrk = get2byte(&data[hdr+5]); - memcpy(&temp[cbrk], &data[cbrk], usableSize - cbrk); cbrk = usableSize; iCellFirst = cellOffset + 2*nCell; iCellLast = usableSize - 4; @@ -51963,7 +53826,7 @@ } #endif assert( pc>=iCellFirst && pc<=iCellLast ); - size = cellSizePtr(pPage, &temp[pc]); + size = cellSizePtr(pPage, &src[pc]); cbrk -= size; #if defined(SQLITE_ENABLE_OVERSIZE_CELL_CHECK) if( cbrk=iCellFirst ); testcase( cbrk+size==usableSize ); testcase( pc+size==usableSize ); - memcpy(&data[cbrk], &temp[pc], size); put2byte(pAddr, cbrk); + if( temp==0 ){ + int x; + if( cbrk==pc ) continue; + temp = sqlite3PagerTempSpace(pPage->pBt->pPager); + x = get2byte(&data[hdr+5]); + memcpy(&temp[x], &data[x], (cbrk+size) - x); + src = temp; + } + memcpy(&data[cbrk], &src[pc], size); } assert( cbrk>=iCellFirst ); put2byte(&data[hdr+5], cbrk); @@ -51994,6 +53865,69 @@ } /* +** Search the free-list on page pPg for space to store a cell nByte bytes in +** size. If one can be found, return a pointer to the space and remove it +** from the free-list. +** +** If no suitable space can be found on the free-list, return NULL. +** +** This function may detect corruption within pPg. If corruption is +** detected then *pRc is set to SQLITE_CORRUPT and NULL is returned. +** +** If a slot of at least nByte bytes is found but cannot be used because +** there are already at least 60 fragmented bytes on the page, return NULL. +** In this case, if pbDefrag parameter is not NULL, set *pbDefrag to true. +*/ +static u8 *pageFindSlot(MemPage *pPg, int nByte, int *pRc, int *pbDefrag){ + const int hdr = pPg->hdrOffset; + u8 * const aData = pPg->aData; + int iAddr; + int pc; + int usableSize = pPg->pBt->usableSize; + + for(iAddr=hdr+1; (pc = get2byte(&aData[iAddr]))>0; iAddr=pc){ + int size; /* Size of the free slot */ + /* EVIDENCE-OF: R-06866-39125 Freeblocks are always connected in order of + ** increasing offset. */ + if( pc>usableSize-4 || pc=nByte ){ + int x = size - nByte; + testcase( x==4 ); + testcase( x==3 ); + if( x<4 ){ + /* EVIDENCE-OF: R-11498-58022 In a well-formed b-tree page, the total + ** number of bytes in fragments may not exceed 60. */ + if( aData[hdr+7]>=60 ){ + if( pbDefrag ) *pbDefrag = 1; + return 0; + } + /* Remove the slot from the free-list. Update the number of + ** fragmented bytes within the page. */ + memcpy(&aData[iAddr], &aData[pc], 2); + aData[hdr+7] += (u8)x; + }else if( size+pc > usableSize ){ + *pRc = SQLITE_CORRUPT_BKPT; + return 0; + }else{ + /* The slot remains on the free-list. Reduce its size to account + ** for the portion used by the new allocation. */ + put2byte(&aData[pc+2], x); + } + return &aData[pc + x]; + } + } + + return 0; +} + +/* ** Allocate nByte bytes of space from within the B-Tree page passed ** as the first argument. Write into *pIdx the index into pPage->aData[] ** of the first byte of allocated space. Return either SQLITE_OK or @@ -52009,74 +53943,55 @@ static int allocateSpace(MemPage *pPage, int nByte, int *pIdx){ const int hdr = pPage->hdrOffset; /* Local cache of pPage->hdrOffset */ u8 * const data = pPage->aData; /* Local cache of pPage->aData */ - int nFrag; /* Number of fragmented bytes on pPage */ int top; /* First byte of cell content area */ + int rc = SQLITE_OK; /* Integer return code */ int gap; /* First byte of gap between cell pointers and cell content */ - int rc; /* Integer return code */ - int usableSize; /* Usable size of the page */ assert( sqlite3PagerIswriteable(pPage->pDbPage) ); assert( pPage->pBt ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); assert( nByte>=0 ); /* Minimum cell size is 4 */ assert( pPage->nFree>=nByte ); assert( pPage->nOverflow==0 ); - usableSize = pPage->pBt->usableSize; - assert( nByte < usableSize-8 ); + assert( nByte < (int)(pPage->pBt->usableSize-8) ); - nFrag = data[hdr+7]; assert( pPage->cellOffset == hdr + 12 - 4*pPage->leaf ); gap = pPage->cellOffset + 2*pPage->nCell; + assert( gap<=65536 ); + /* EVIDENCE-OF: R-29356-02391 If the database uses a 65536-byte page size + ** and the reserved space is zero (the usual value for reserved space) + ** then the cell content offset of an empty page wants to be 65536. + ** However, that integer is too large to be stored in a 2-byte unsigned + ** integer, so a value of 0 is used in its place. */ top = get2byteNotZero(&data[hdr+5]); if( gap>top ) return SQLITE_CORRUPT_BKPT; + + /* If there is enough space between gap and top for one more cell pointer + ** array entry offset, and if the freelist is not empty, then search the + ** freelist looking for a free slot big enough to satisfy the request. + */ testcase( gap+2==top ); testcase( gap+1==top ); testcase( gap==top ); - - if( nFrag>=60 ){ - /* Always defragment highly fragmented pages */ - rc = defragmentPage(pPage); + if( gap+2<=top && (data[hdr+1] || data[hdr+2]) ){ + int bDefrag = 0; + u8 *pSpace = pageFindSlot(pPage, nByte, &rc, &bDefrag); if( rc ) return rc; - top = get2byteNotZero(&data[hdr+5]); - }else if( gap+2<=top ){ - /* Search the freelist looking for a free slot big enough to satisfy - ** the request. The allocation is made from the first free slot in - ** the list that is large enough to accommodate it. - */ - int pc, addr; - for(addr=hdr+1; (pc = get2byte(&data[addr]))>0; addr=pc){ - int size; /* Size of the free slot */ - if( pc>usableSize-4 || pc=nByte ){ - int x = size - nByte; - testcase( x==4 ); - testcase( x==3 ); - if( x<4 ){ - /* Remove the slot from the free-list. Update the number of - ** fragmented bytes within the page. */ - memcpy(&data[addr], &data[pc], 2); - data[hdr+7] = (u8)(nFrag + x); - }else if( size+pc > usableSize ){ - return SQLITE_CORRUPT_BKPT; - }else{ - /* The slot remains on the free-list. Reduce its size to account - ** for the portion used by the new allocation. */ - put2byte(&data[pc+2], x); - } - *pIdx = pc + x; - return SQLITE_OK; - } + if( bDefrag ) goto defragment_page; + if( pSpace ){ + assert( pSpace>=data && (pSpace - data)<65536 ); + *pIdx = (int)(pSpace - data); + return SQLITE_OK; } } - /* Check to make sure there is enough space in the gap to satisfy - ** the allocation. If not, defragment. + /* The request could not be fulfilled using a freelist slot. Check + ** to see if defragmentation is necessary. */ testcase( gap+2+nByte==top ); if( gap+2+nByte>top ){ + defragment_page: + assert( pPage->nCell>0 || CORRUPT_DB ); rc = defragmentPage(pPage); if( rc ) return rc; top = get2byteNotZero(&data[hdr+5]); @@ -52099,90 +54014,100 @@ /* ** Return a section of the pPage->aData to the freelist. -** The first byte of the new free block is pPage->aDisk[start] -** and the size of the block is "size" bytes. +** The first byte of the new free block is pPage->aData[iStart] +** and the size of the block is iSize bytes. ** -** Most of the effort here is involved in coalesing adjacent -** free blocks into a single big free block. +** Adjacent freeblocks are coalesced. +** +** Note that even though the freeblock list was checked by btreeInitPage(), +** that routine will not detect overlap between cells or freeblocks. Nor +** does it detect cells or freeblocks that encrouch into the reserved bytes +** at the end of the page. So do additional corruption checks inside this +** routine and return SQLITE_CORRUPT if any problems are found. */ -static int freeSpace(MemPage *pPage, int start, int size){ - int addr, pbegin, hdr; - int iLast; /* Largest possible freeblock offset */ - unsigned char *data = pPage->aData; +static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ + u16 iPtr; /* Address of ptr to next freeblock */ + u16 iFreeBlk; /* Address of the next freeblock */ + u8 hdr; /* Page header size. 0 or 100 */ + u8 nFrag = 0; /* Reduction in fragmentation */ + u16 iOrigSize = iSize; /* Original value of iSize */ + u32 iLast = pPage->pBt->usableSize-4; /* Largest possible freeblock offset */ + u32 iEnd = iStart + iSize; /* First byte past the iStart buffer */ + unsigned char *data = pPage->aData; /* Page content */ assert( pPage->pBt!=0 ); assert( sqlite3PagerIswriteable(pPage->pDbPage) ); - assert( start>=pPage->hdrOffset+6+pPage->childPtrSize ); - assert( (start + size) <= (int)pPage->pBt->usableSize ); + assert( iStart>=pPage->hdrOffset+6+pPage->childPtrSize ); + assert( CORRUPT_DB || iEnd <= pPage->pBt->usableSize ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); - assert( size>=0 ); /* Minimum cell size is 4 */ + assert( iSize>=4 ); /* Minimum cell size is 4 */ + assert( iStart<=iLast ); + /* Overwrite deleted information with zeros when the secure_delete + ** option is enabled */ if( pPage->pBt->btsFlags & BTS_SECURE_DELETE ){ - /* Overwrite deleted information with zeros when the secure_delete - ** option is enabled */ - memset(&data[start], 0, size); + memset(&data[iStart], 0, iSize); } - /* Add the space back into the linked list of freeblocks. Note that - ** even though the freeblock list was checked by btreeInitPage(), - ** btreeInitPage() did not detect overlapping cells or - ** freeblocks that overlapped cells. Nor does it detect when the - ** cell content area exceeds the value in the page header. If these - ** situations arise, then subsequent insert operations might corrupt - ** the freelist. So we do need to check for corruption while scanning - ** the freelist. + /* The list of freeblocks must be in ascending order. Find the + ** spot on the list where iStart should be inserted. */ hdr = pPage->hdrOffset; - addr = hdr + 1; - iLast = pPage->pBt->usableSize - 4; - assert( start<=iLast ); - while( (pbegin = get2byte(&data[addr]))0 ){ - if( pbegin0 && iFreeBlkiLast ){ - return SQLITE_CORRUPT_BKPT; - } - assert( pbegin>addr || pbegin==0 ); - put2byte(&data[addr], start); - put2byte(&data[start], pbegin); - put2byte(&data[start+2], size); - pPage->nFree = pPage->nFree + (u16)size; - - /* Coalesce adjacent free blocks */ - addr = hdr + 1; - while( (pbegin = get2byte(&data[addr]))>0 ){ - int pnext, psize, x; - assert( pbegin>addr ); - assert( pbegin <= (int)pPage->pBt->usableSize-4 ); - pnext = get2byte(&data[pbegin]); - psize = get2byte(&data[pbegin+2]); - if( pbegin + psize + 3 >= pnext && pnext>0 ){ - int frag = pnext - (pbegin+psize); - if( (frag<0) || (frag>(int)data[hdr+7]) ){ - return SQLITE_CORRUPT_BKPT; + if( iFreeBlk>iLast ) return SQLITE_CORRUPT_BKPT; + assert( iFreeBlk>iPtr || iFreeBlk==0 ); + + /* At this point: + ** iFreeBlk: First freeblock after iStart, or zero if none + ** iPtr: The address of a pointer iFreeBlk + ** + ** Check to see if iFreeBlk should be coalesced onto the end of iStart. + */ + if( iFreeBlk && iEnd+3>=iFreeBlk ){ + nFrag = iFreeBlk - iEnd; + if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_BKPT; + iEnd = iFreeBlk + get2byte(&data[iFreeBlk+2]); + iSize = iEnd - iStart; + iFreeBlk = get2byte(&data[iFreeBlk]); + } + + /* If iPtr is another freeblock (that is, if iPtr is not the freelist + ** pointer in the page header) then check to see if iStart should be + ** coalesced onto the end of iPtr. + */ + if( iPtr>hdr+1 ){ + int iPtrEnd = iPtr + get2byte(&data[iPtr+2]); + if( iPtrEnd+3>=iStart ){ + if( iPtrEnd>iStart ) return SQLITE_CORRUPT_BKPT; + nFrag += iStart - iPtrEnd; + iSize = iEnd - iPtr; + iStart = iPtr; } - data[hdr+7] -= (u8)frag; - x = get2byte(&data[pnext]); - put2byte(&data[pbegin], x); - x = pnext + get2byte(&data[pnext+2]) - pbegin; - put2byte(&data[pbegin+2], x); - }else{ - addr = pbegin; } + if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_BKPT; + data[hdr+7] -= nFrag; } - - /* If the cell content area begins with a freeblock, remove it. */ - if( data[hdr+1]==data[hdr+5] && data[hdr+2]==data[hdr+6] ){ - int top; - pbegin = get2byte(&data[hdr+1]); - memcpy(&data[hdr+1], &data[pbegin], 2); - top = get2byte(&data[hdr+5]) + get2byte(&data[pbegin+2]); - put2byte(&data[hdr+5], top); + if( iStart==get2byte(&data[hdr+5]) ){ + /* The new freeblock is at the beginning of the cell content area, + ** so just extend the cell content area rather than create another + ** freelist entry */ + if( iPtr!=hdr+1 ) return SQLITE_CORRUPT_BKPT; + put2byte(&data[hdr+1], iFreeBlk); + put2byte(&data[hdr+5], iEnd); + }else{ + /* Insert the new freeblock into the freelist */ + put2byte(&data[iPtr], iStart); + put2byte(&data[iStart], iFreeBlk); + put2byte(&data[iStart+2], iSize); } - assert( sqlite3PagerIswriteable(pPage->pDbPage) ); + pPage->nFree += iOrigSize; return SQLITE_OK; } @@ -52208,16 +54133,32 @@ pPage->childPtrSize = 4-4*pPage->leaf; pBt = pPage->pBt; if( flagByte==(PTF_LEAFDATA | PTF_INTKEY) ){ + /* EVIDENCE-OF: R-03640-13415 A value of 5 means the page is an interior + ** table b-tree page. */ + assert( (PTF_LEAFDATA|PTF_INTKEY)==5 ); + /* EVIDENCE-OF: R-20501-61796 A value of 13 means the page is a leaf + ** table b-tree page. */ + assert( (PTF_LEAFDATA|PTF_INTKEY|PTF_LEAF)==13 ); pPage->intKey = 1; - pPage->hasData = pPage->leaf; + pPage->intKeyLeaf = pPage->leaf; + pPage->noPayload = !pPage->leaf; pPage->maxLocal = pBt->maxLeaf; pPage->minLocal = pBt->minLeaf; }else if( flagByte==PTF_ZERODATA ){ + /* EVIDENCE-OF: R-27225-53936 A value of 2 means the page is an interior + ** index b-tree page. */ + assert( (PTF_ZERODATA)==2 ); + /* EVIDENCE-OF: R-16571-11615 A value of 10 means the page is a leaf + ** index b-tree page. */ + assert( (PTF_ZERODATA|PTF_LEAF)==10 ); pPage->intKey = 0; - pPage->hasData = 0; + pPage->intKeyLeaf = 0; + pPage->noPayload = 0; pPage->maxLocal = pBt->maxLocal; pPage->minLocal = pBt->minLocal; }else{ + /* EVIDENCE-OF: R-47608-56469 Any other value for the b-tree page type is + ** an error. */ return SQLITE_CORRUPT_BKPT; } pPage->max1bytePayload = pBt->max1bytePayload; @@ -52257,21 +54198,33 @@ hdr = pPage->hdrOffset; data = pPage->aData; + /* EVIDENCE-OF: R-28594-02890 The one-byte flag at offset 0 indicating + ** the b-tree page type. */ if( decodeFlags(pPage, data[hdr]) ) return SQLITE_CORRUPT_BKPT; assert( pBt->pageSize>=512 && pBt->pageSize<=65536 ); pPage->maskPage = (u16)(pBt->pageSize - 1); pPage->nOverflow = 0; usableSize = pBt->usableSize; - pPage->cellOffset = cellOffset = hdr + 12 - 4*pPage->leaf; + pPage->cellOffset = cellOffset = hdr + 8 + pPage->childPtrSize; pPage->aDataEnd = &data[usableSize]; pPage->aCellIdx = &data[cellOffset]; + /* EVIDENCE-OF: R-58015-48175 The two-byte integer at offset 5 designates + ** the start of the cell content area. A zero value for this integer is + ** interpreted as 65536. */ top = get2byteNotZero(&data[hdr+5]); + /* EVIDENCE-OF: R-37002-32774 The two-byte integer at offset 3 gives the + ** number of cells on the page. */ pPage->nCell = get2byte(&data[hdr+3]); if( pPage->nCell>MX_CELL(pBt) ){ /* To many cells for a single page. The page must be corrupt */ return SQLITE_CORRUPT_BKPT; } testcase( pPage->nCell==MX_CELL(pBt) ); + /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only + ** possible for a root page of a table that contains no rows) then the + ** offset to the cell content area will equal the page size minus the + ** bytes of reserved space. */ + assert( pPage->nCell>0 || top==usableSize || CORRUPT_DB ); /* A malformed database page might cause us to read past the end ** of page when parsing a cell. @@ -52305,13 +54258,20 @@ } #endif - /* Compute the total free space on the page */ + /* Compute the total free space on the page + ** EVIDENCE-OF: R-23588-34450 The two-byte integer at offset 1 gives the + ** start of the first freeblock on the page, or is zero if there are no + ** freeblocks. */ pc = get2byte(&data[hdr+1]); - nFree = data[hdr+7] + top; + nFree = data[hdr+7] + top; /* Init nFree to non-freeblock free space */ while( pc>0 ){ u16 next, size; if( pciCellLast ){ - /* Start of free block is off the page */ + /* EVIDENCE-OF: R-55530-52930 In a well-formed b-tree page, there will + ** always be at least one cell before the first freeblock. + ** + ** Or, the freeblock is off the end of the page + */ return SQLITE_CORRUPT_BKPT; } next = get2byte(&data[pc]); @@ -52444,7 +54404,7 @@ SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree *p){ assert( sqlite3BtreeHoldsMutex(p) ); assert( ((p->pBt->nPage)&0x8000000)==0 ); - return (int)btreePagecount(p->pBt); + return btreePagecount(p->pBt); } /* @@ -52717,6 +54677,9 @@ #ifdef SQLITE_SECURE_DELETE pBt->btsFlags |= BTS_SECURE_DELETE; #endif + /* EVIDENCE-OF: R-51873-39618 The page size for a database file is + ** determined by the 2-byte integer located at an offset of 16 bytes from + ** the beginning of the database file. */ pBt->pageSize = (zDbHeader[16]<<8) | (zDbHeader[17]<<16); if( pBt->pageSize<512 || pBt->pageSize>SQLITE_MAX_PAGE_SIZE || ((pBt->pageSize-1)&pBt->pageSize)!=0 ){ @@ -52735,6 +54698,9 @@ #endif nReserve = 0; }else{ + /* EVIDENCE-OF: R-37497-42412 The size of the reserved region is + ** determined by the one-byte unsigned integer found at an offset of 20 + ** into the database file header. */ nReserve = zDbHeader[20]; pBt->btsFlags |= BTS_PAGESIZE_FIXED; #ifndef SQLITE_OMIT_AUTOVACUUM @@ -52869,7 +54835,8 @@ /* ** Make sure pBt->pTmpSpace points to an allocation of -** MX_CELL_SIZE(pBt) bytes. +** MX_CELL_SIZE(pBt) bytes with a 4-byte prefix for a left-child +** pointer. */ static void allocateTempSpace(BtShared *pBt){ if( !pBt->pTmpSpace ){ @@ -52884,17 +54851,28 @@ ** it into a database page. This is not actually a problem, but it ** does cause a valgrind error when the 1 or 2 bytes of unitialized ** data is passed to system call write(). So to avoid this error, - ** zero the first 4 bytes of temp space here. */ - if( pBt->pTmpSpace ) memset(pBt->pTmpSpace, 0, 4); + ** zero the first 4 bytes of temp space here. + ** + ** Also: Provide four bytes of initialized space before the + ** beginning of pTmpSpace as an area available to prepend the + ** left-child pointer to the beginning of a cell. + */ + if( pBt->pTmpSpace ){ + memset(pBt->pTmpSpace, 0, 8); + pBt->pTmpSpace += 4; + } } } /* ** Free the pBt->pTmpSpace allocation */ static void freeTempSpace(BtShared *pBt){ - sqlite3PageFree( pBt->pTmpSpace); - pBt->pTmpSpace = 0; + if( pBt->pTmpSpace ){ + pBt->pTmpSpace -= 4; + sqlite3PageFree(pBt->pTmpSpace); + pBt->pTmpSpace = 0; + } } /* @@ -52920,7 +54898,7 @@ ** The call to sqlite3BtreeRollback() drops any table-locks held by ** this handle. */ - sqlite3BtreeRollback(p, SQLITE_OK); + sqlite3BtreeRollback(p, SQLITE_OK, 0); sqlite3BtreeLeave(p); /* If there are still other outstanding references to the shared-btree @@ -52979,6 +54957,7 @@ return SQLITE_OK; } +#if SQLITE_MAX_MMAP_SIZE>0 /* ** Change the limit on the amount of the database file that may be ** memory mapped. @@ -52991,6 +54970,7 @@ sqlite3BtreeLeave(p); return SQLITE_OK; } +#endif /* SQLITE_MAX_MMAP_SIZE>0 */ /* ** Change the way data is synced to disk in order to increase or decrease @@ -53230,6 +55210,9 @@ u32 usableSize; u8 *page1 = pPage1->aData; rc = SQLITE_NOTADB; + /* EVIDENCE-OF: R-43737-39999 Every valid SQLite database file begins + ** with the following 16 bytes (in hex): 53 51 4c 69 74 65 20 66 6f 72 6d + ** 61 74 20 33 00. */ if( memcmp(page1, zMagicHeader, 16)!=0 ){ goto page1_init_failed; } @@ -53270,22 +55253,35 @@ } #endif - /* The maximum embedded fraction must be exactly 25%. And the minimum - ** embedded fraction must be 12.5% for both leaf-data and non-leaf-data. + /* EVIDENCE-OF: R-15465-20813 The maximum and minimum embedded payload + ** fractions and the leaf payload fraction values must be 64, 32, and 32. + ** ** The original design allowed these amounts to vary, but as of ** version 3.6.0, we require them to be fixed. */ if( memcmp(&page1[21], "\100\040\040",3)!=0 ){ goto page1_init_failed; } + /* EVIDENCE-OF: R-51873-39618 The page size for a database file is + ** determined by the 2-byte integer located at an offset of 16 bytes from + ** the beginning of the database file. */ pageSize = (page1[16]<<8) | (page1[17]<<16); + /* EVIDENCE-OF: R-25008-21688 The size of a page is a power of two + ** between 512 and 65536 inclusive. */ if( ((pageSize-1)&pageSize)!=0 || pageSize>SQLITE_MAX_PAGE_SIZE || pageSize<=256 ){ goto page1_init_failed; } assert( (pageSize & 7)==0 ); + /* EVIDENCE-OF: R-59310-51205 The "reserved space" size in the 1-byte + ** integer at offset 20 is the number of bytes of space at the end of + ** each page to reserve for extensions. + ** + ** EVIDENCE-OF: R-37497-42412 The size of the reserved region is + ** determined by the one-byte unsigned integer found at an offset of 20 + ** into the database file header. */ usableSize = pageSize - page1[20]; if( (u32)pageSize!=pBt->pageSize ){ /* After reading the first page of the database assuming a page size @@ -53306,6 +55302,9 @@ rc = SQLITE_CORRUPT_BKPT; goto page1_init_failed; } + /* EVIDENCE-OF: R-28312-64704 However, the usable size is not allowed to + ** be less than 480. In other words, if the page size is 512, then the + ** reserved space size cannot exceed 32. */ if( usableSize<480 ){ goto page1_init_failed; } @@ -53360,14 +55359,15 @@ ** false then all cursors are counted. ** ** For the purposes of this routine, a cursor is any cursor that -** is capable of reading or writing to the databse. Cursors that +** is capable of reading or writing to the database. Cursors that ** have been tripped into the CURSOR_FAULT state are not counted. */ static int countValidCursors(BtShared *pBt, int wrOnly){ BtCursor *pCur; int r = 0; for(pCur=pBt->pCursor; pCur; pCur=pCur->pNext){ - if( (wrOnly==0 || pCur->wrFlag) && pCur->eState!=CURSOR_FAULT ) r++; + if( (wrOnly==0 || (pCur->curFlags & BTCF_WriteFlag)!=0) + && pCur->eState!=CURSOR_FAULT ) r++; } return r; } @@ -53385,11 +55385,11 @@ assert( sqlite3_mutex_held(pBt->mutex) ); assert( countValidCursors(pBt,0)==0 || pBt->inTransaction>TRANS_NONE ); if( pBt->inTransaction==TRANS_NONE && pBt->pPage1!=0 ){ - assert( pBt->pPage1->aData ); + MemPage *pPage1 = pBt->pPage1; + assert( pPage1->aData ); assert( sqlite3PagerRefcount(pBt->pPager)==1 ); - assert( pBt->pPage1->aData ); - releasePage(pBt->pPage1); pBt->pPage1 = 0; + releasePage(pPage1); } } @@ -53823,15 +55823,15 @@ ** calling this function again), return SQLITE_DONE. Or, if an error ** occurs, return some other error code. ** -** More specificly, this function attempts to re-organize the database so +** More specifically, this function attempts to re-organize the database so ** that the last page of the file currently in use is no longer in use. ** ** Parameter nFin is the number of pages that this database would contain ** were this function called until it returns SQLITE_DONE. ** ** If the bCommit parameter is non-zero, this function assumes that the ** caller will keep calling incrVacuumStep() until it returns SQLITE_DONE -** or an error. bCommit is passed true for an auto-vacuum-on-commmit +** or an error. bCommit is passed true for an auto-vacuum-on-commit ** operation, or false for an incremental vacuum. */ static int incrVacuumStep(BtShared *pBt, Pgno nFin, Pgno iLastPg, int bCommit){ @@ -54185,6 +56185,7 @@ sqlite3BtreeLeave(p); return rc; } + p->iDataVersion--; /* Compensate for pPager->iDataVersion++; */ pBt->inTransaction = TRANS_READ; btreeClearHasContent(pBt); } @@ -54210,60 +56211,91 @@ /* ** This routine sets the state to CURSOR_FAULT and the error -** code to errCode for every cursor on BtShared that pBtree -** references. +** code to errCode for every cursor on any BtShared that pBtree +** references. Or if the writeOnly flag is set to 1, then only +** trip write cursors and leave read cursors unchanged. ** -** Every cursor is tripped, including cursors that belong -** to other database connections that happen to be sharing -** the cache with pBtree. +** Every cursor is a candidate to be tripped, including cursors +** that belong to other database connections that happen to be +** sharing the cache with pBtree. ** -** This routine gets called when a rollback occurs. -** All cursors using the same cache must be tripped -** to prevent them from trying to use the btree after -** the rollback. The rollback may have deleted tables -** or moved root pages, so it is not sufficient to -** save the state of the cursor. The cursor must be -** invalidated. +** This routine gets called when a rollback occurs. If the writeOnly +** flag is true, then only write-cursors need be tripped - read-only +** cursors save their current positions so that they may continue +** following the rollback. Or, if writeOnly is false, all cursors are +** tripped. In general, writeOnly is false if the transaction being +** rolled back modified the database schema. In this case b-tree root +** pages may be moved or deleted from the database altogether, making +** it unsafe for read cursors to continue. +** +** If the writeOnly flag is true and an error is encountered while +** saving the current position of a read-only cursor, all cursors, +** including all read-cursors are tripped. +** +** SQLITE_OK is returned if successful, or if an error occurs while +** saving a cursor position, an SQLite error code. */ -SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree *pBtree, int errCode){ +SQLITE_PRIVATE int sqlite3BtreeTripAllCursors(Btree *pBtree, int errCode, int writeOnly){ BtCursor *p; - if( pBtree==0 ) return; - sqlite3BtreeEnter(pBtree); - for(p=pBtree->pBt->pCursor; p; p=p->pNext){ - int i; - sqlite3BtreeClearCursor(p); - p->eState = CURSOR_FAULT; - p->skipNext = errCode; - for(i=0; i<=p->iPage; i++){ - releasePage(p->apPage[i]); - p->apPage[i] = 0; + int rc = SQLITE_OK; + + assert( (writeOnly==0 || writeOnly==1) && BTCF_WriteFlag==1 ); + if( pBtree ){ + sqlite3BtreeEnter(pBtree); + for(p=pBtree->pBt->pCursor; p; p=p->pNext){ + int i; + if( writeOnly && (p->curFlags & BTCF_WriteFlag)==0 ){ + if( p->eState==CURSOR_VALID ){ + rc = saveCursorPosition(p); + if( rc!=SQLITE_OK ){ + (void)sqlite3BtreeTripAllCursors(pBtree, rc, 0); + break; + } + } + }else{ + sqlite3BtreeClearCursor(p); + p->eState = CURSOR_FAULT; + p->skipNext = errCode; + } + for(i=0; i<=p->iPage; i++){ + releasePage(p->apPage[i]); + p->apPage[i] = 0; + } } + sqlite3BtreeLeave(pBtree); } - sqlite3BtreeLeave(pBtree); + return rc; } /* -** Rollback the transaction in progress. All cursors will be -** invalided by this operation. Any attempt to use a cursor -** that was open at the beginning of this operation will result -** in an error. +** Rollback the transaction in progress. ** +** If tripCode is not SQLITE_OK then cursors will be invalidated (tripped). +** Only write cursors are tripped if writeOnly is true but all cursors are +** tripped if writeOnly is false. Any attempt to use +** a tripped cursor will result in an error. +** ** This will release the write lock on the database file. If there ** are no active cursors, it also releases the read lock. */ -SQLITE_PRIVATE int sqlite3BtreeRollback(Btree *p, int tripCode){ +SQLITE_PRIVATE int sqlite3BtreeRollback(Btree *p, int tripCode, int writeOnly){ int rc; BtShared *pBt = p->pBt; MemPage *pPage1; + assert( writeOnly==1 || writeOnly==0 ); + assert( tripCode==SQLITE_ABORT_ROLLBACK || tripCode==SQLITE_OK ); sqlite3BtreeEnter(p); if( tripCode==SQLITE_OK ){ rc = tripCode = saveAllCursors(pBt, 0, 0); + if( rc ) writeOnly = 0; }else{ rc = SQLITE_OK; } if( tripCode ){ - sqlite3BtreeTripAllCursors(p, tripCode); + int rc2 = sqlite3BtreeTripAllCursors(p, tripCode, writeOnly); + assert( rc==SQLITE_OK || (writeOnly==0 && rc2==SQLITE_OK) ); + if( rc2!=SQLITE_OK ) rc = rc2; } btreeIntegrity(p); @@ -54298,7 +56330,7 @@ } /* -** Start a statement subtransaction. The subtransaction can can be rolled +** Start a statement subtransaction. The subtransaction can be rolled ** back independently of the main transaction. You must start a transaction ** before starting a subtransaction. The subtransaction is ended automatically ** if the main transaction commits or rolls back. @@ -54430,6 +56462,10 @@ if( NEVER(wrFlag && (pBt->btsFlags & BTS_READ_ONLY)!=0) ){ return SQLITE_READONLY; } + if( wrFlag ){ + allocateTempSpace(pBt); + if( pBt->pTmpSpace==0 ) return SQLITE_NOMEM; + } if( iTable==1 && btreePagecount(pBt)==0 ){ assert( wrFlag==0 ); iTable = 0; @@ -54442,7 +56478,8 @@ pCur->pKeyInfo = pKeyInfo; pCur->pBtree = p; pCur->pBt = pBt; - pCur->wrFlag = (u8)wrFlag; + assert( wrFlag==0 || wrFlag==BTCF_WriteFlag ); + pCur->curFlags = wrFlag; pCur->pNext = pBt->pCursor; if( pCur->pNext ){ pCur->pNext->pPrev = pCur; @@ -54512,7 +56549,7 @@ releasePage(pCur->apPage[i]); } unlockBtreeIfUnused(pBt); - invalidateOverflowCache(pCur); + sqlite3_free(pCur->aOverflow); /* sqlite3_free(pCur); */ sqlite3BtreeLeave(pBtree); } @@ -54531,7 +56568,7 @@ ** compiler to crash when getCellInfo() is implemented as a macro. ** But there is a measureable speed advantage to using the macro on gcc ** (when less compiler optimizations like -Os or -O0 are used and the -** compiler is not doing agressive inlining.) So we use a real function +** compiler is not doing aggressive inlining.) So we use a real function ** for MSVC and a macro for everything else. Ticket #2457. */ #ifndef NDEBUG @@ -54551,7 +56588,7 @@ if( pCur->info.nSize==0 ){ int iPage = pCur->iPage; btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info); - pCur->validNKey = 1; + pCur->curFlags |= BTCF_ValidNKey; }else{ assertCellInfo(pCur); } @@ -54561,8 +56598,8 @@ #define getCellInfo(pCur) \ if( pCur->info.nSize==0 ){ \ int iPage = pCur->iPage; \ - btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info); \ - pCur->validNKey = 1; \ + btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info); \ + pCur->curFlags |= BTCF_ValidNKey; \ }else{ \ assertCellInfo(pCur); \ } @@ -54593,13 +56630,9 @@ */ SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor *pCur, i64 *pSize){ assert( cursorHoldsMutex(pCur) ); - assert( pCur->eState==CURSOR_INVALID || pCur->eState==CURSOR_VALID ); - if( pCur->eState!=CURSOR_VALID ){ - *pSize = 0; - }else{ - getCellInfo(pCur); - *pSize = pCur->info.nKey; - } + assert( pCur->eState==CURSOR_VALID ); + getCellInfo(pCur); + *pSize = pCur->info.nKey; return SQLITE_OK; } @@ -54618,8 +56651,9 @@ SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor *pCur, u32 *pSize){ assert( cursorHoldsMutex(pCur) ); assert( pCur->eState==CURSOR_VALID ); + assert( pCur->apPage[pCur->iPage]->intKeyLeaf==1 ); getCellInfo(pCur); - *pSize = pCur->info.nData; + *pSize = pCur->info.nPayload; return SQLITE_OK; } @@ -54733,22 +56767,24 @@ /* ** This function is used to read or overwrite payload information -** for the entry that the pCur cursor is pointing to. If the eOp -** parameter is 0, this is a read operation (data copied into -** buffer pBuf). If it is non-zero, a write (data copied from -** buffer pBuf). +** for the entry that the pCur cursor is pointing to. The eOp +** argument is interpreted as follows: ** +** 0: The operation is a read. Populate the overflow cache. +** 1: The operation is a write. Populate the overflow cache. +** 2: The operation is a read. Do not populate the overflow cache. +** ** A total of "amt" bytes are read or written beginning at "offset". ** Data is read to or from the buffer pBuf. ** ** The content being read or written might appear on the main page ** or be scattered out on multiple overflow pages. ** -** If the BtCursor.isIncrblobHandle flag is set, and the current -** cursor entry uses one or more overflow pages, this function -** allocates space for and lazily popluates the overflow page-list -** cache array (BtCursor.aOverflow). Subsequent calls use this -** cache to make seeking to the supplied offset more efficient. +** If the current cursor entry uses one or more overflow pages and the +** eOp argument is not 2, this function may allocate space for and lazily +** populates the overflow page-list cache array (BtCursor.aOverflow). +** Subsequent calls use this cache to make seeking to the supplied offset +** more efficient. ** ** Once an overflow page-list cache has been allocated, it may be ** invalidated if some other cursor writes to the same table, or if @@ -54768,23 +56804,28 @@ ){ unsigned char *aPayload; int rc = SQLITE_OK; - u32 nKey; int iIdx = 0; MemPage *pPage = pCur->apPage[pCur->iPage]; /* Btree page of current entry */ BtShared *pBt = pCur->pBt; /* Btree this cursor belongs to */ +#ifdef SQLITE_DIRECT_OVERFLOW_READ + unsigned char * const pBufStart = pBuf; + int bEnd; /* True if reading to end of data */ +#endif assert( pPage ); assert( pCur->eState==CURSOR_VALID ); assert( pCur->aiIdx[pCur->iPage]nCell ); assert( cursorHoldsMutex(pCur) ); + assert( eOp!=2 || offset==0 ); /* Always start from beginning for eOp==2 */ getCellInfo(pCur); - aPayload = pCur->info.pCell + pCur->info.nHeader; - nKey = (pPage->intKey ? 0 : (int)pCur->info.nKey); + aPayload = pCur->info.pPayload; +#ifdef SQLITE_DIRECT_OVERFLOW_READ + bEnd = offset+amt==pCur->info.nPayload; +#endif + assert( offset+amt <= pCur->info.nPayload ); - if( NEVER(offset+amt > nKey+pCur->info.nData) - || &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize] - ){ + if( &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize] ){ /* Trying to read or write past the end of the data is an error */ return SQLITE_CORRUPT_BKPT; } @@ -54795,72 +56836,86 @@ if( a+offset>pCur->info.nLocal ){ a = pCur->info.nLocal - offset; } - rc = copyPayload(&aPayload[offset], pBuf, a, eOp, pPage->pDbPage); + rc = copyPayload(&aPayload[offset], pBuf, a, (eOp & 0x01), pPage->pDbPage); offset = 0; pBuf += a; amt -= a; }else{ offset -= pCur->info.nLocal; } + if( rc==SQLITE_OK && amt>0 ){ const u32 ovflSize = pBt->usableSize - 4; /* Bytes content per ovfl page */ Pgno nextPage; nextPage = get4byte(&aPayload[pCur->info.nLocal]); -#ifndef SQLITE_OMIT_INCRBLOB - /* If the isIncrblobHandle flag is set and the BtCursor.aOverflow[] - ** has not been allocated, allocate it now. The array is sized at - ** one entry for each overflow page in the overflow chain. The - ** page number of the first overflow page is stored in aOverflow[0], - ** etc. A value of 0 in the aOverflow[] array means "not yet known" - ** (the cache is lazily populated). + /* If the BtCursor.aOverflow[] has not been allocated, allocate it now. + ** Except, do not allocate aOverflow[] for eOp==2. + ** + ** The aOverflow[] array is sized at one entry for each overflow page + ** in the overflow chain. The page number of the first overflow page is + ** stored in aOverflow[0], etc. A value of 0 in the aOverflow[] array + ** means "not yet known" (the cache is lazily populated). */ - if( pCur->isIncrblobHandle && !pCur->aOverflow ){ + if( eOp!=2 && (pCur->curFlags & BTCF_ValidOvfl)==0 ){ int nOvfl = (pCur->info.nPayload-pCur->info.nLocal+ovflSize-1)/ovflSize; - pCur->aOverflow = (Pgno *)sqlite3MallocZero(sizeof(Pgno)*nOvfl); - /* nOvfl is always positive. If it were zero, fetchPayload would have - ** been used instead of this routine. */ - if( ALWAYS(nOvfl) && !pCur->aOverflow ){ - rc = SQLITE_NOMEM; + if( nOvfl>pCur->nOvflAlloc ){ + Pgno *aNew = (Pgno*)sqlite3Realloc( + pCur->aOverflow, nOvfl*2*sizeof(Pgno) + ); + if( aNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + pCur->nOvflAlloc = nOvfl*2; + pCur->aOverflow = aNew; + } } + if( rc==SQLITE_OK ){ + memset(pCur->aOverflow, 0, nOvfl*sizeof(Pgno)); + pCur->curFlags |= BTCF_ValidOvfl; + } } /* If the overflow page-list cache has been allocated and the ** entry for the first required overflow page is valid, skip ** directly to it. */ - if( pCur->aOverflow && pCur->aOverflow[offset/ovflSize] ){ + if( (pCur->curFlags & BTCF_ValidOvfl)!=0 + && pCur->aOverflow[offset/ovflSize] + ){ iIdx = (offset/ovflSize); nextPage = pCur->aOverflow[iIdx]; offset = (offset%ovflSize); } -#endif for( ; rc==SQLITE_OK && amt>0 && nextPage; iIdx++){ -#ifndef SQLITE_OMIT_INCRBLOB /* If required, populate the overflow page-list cache. */ - if( pCur->aOverflow ){ + if( (pCur->curFlags & BTCF_ValidOvfl)!=0 ){ assert(!pCur->aOverflow[iIdx] || pCur->aOverflow[iIdx]==nextPage); pCur->aOverflow[iIdx] = nextPage; } -#endif if( offset>=ovflSize ){ /* The only reason to read this page is to obtain the page ** number for the next page in the overflow chain. The page ** data is not required. So first try to lookup the overflow ** page-list cache, if any, then fall back to the getOverflowPage() ** function. + ** + ** Note that the aOverflow[] array must be allocated because eOp!=2 + ** here. If eOp==2, then offset==0 and this branch is never taken. */ -#ifndef SQLITE_OMIT_INCRBLOB - if( pCur->aOverflow && pCur->aOverflow[iIdx+1] ){ + assert( eOp!=2 ); + assert( pCur->curFlags & BTCF_ValidOvfl ); + assert( pCur->pBtree->db==pBt->db ); + if( pCur->aOverflow[iIdx+1] ){ nextPage = pCur->aOverflow[iIdx+1]; - } else -#endif + }else{ rc = getOverflowPage(pBt, nextPage, 0, &nextPage); + } offset -= ovflSize; }else{ /* Need to read this page properly. It contains some of the @@ -54882,19 +56937,24 @@ ** 3) the database is file-backed, and ** 4) there is no open write-transaction, and ** 5) the database is not a WAL database, + ** 6) all data from the page is being read. + ** 7) at least 4 bytes have already been read into the output buffer ** ** then data can be read directly from the database file into the ** output buffer, bypassing the page-cache altogether. This speeds ** up loading large records that span many overflow pages. */ - if( eOp==0 /* (1) */ + if( (eOp&0x01)==0 /* (1) */ && offset==0 /* (2) */ + && (bEnd || a==ovflSize) /* (6) */ && pBt->inTransaction==TRANS_READ /* (4) */ && (fd = sqlite3PagerFile(pBt->pPager))->pMethods /* (3) */ && pBt->pPage1->aData[19]==0x01 /* (5) */ + && &pBuf[-4]>=pBufStart /* (7) */ ){ u8 aSave[4]; u8 *aWrite = &pBuf[-4]; + assert( aWrite>=pBufStart ); /* hence (7) */ memcpy(aSave, aWrite, 4); rc = sqlite3OsRead(fd, aWrite, a+4, (i64)pBt->pageSize*(nextPage-1)); nextPage = get4byte(aWrite); @@ -54905,12 +56965,12 @@ { DbPage *pDbPage; rc = sqlite3PagerAcquire(pBt->pPager, nextPage, &pDbPage, - (eOp==0 ? PAGER_GET_READONLY : 0) + ((eOp&0x01)==0 ? PAGER_GET_READONLY : 0) ); if( rc==SQLITE_OK ){ aPayload = sqlite3PagerGetData(pDbPage); nextPage = get4byte(aPayload); - rc = copyPayload(&aPayload[offset+4], pBuf, a, eOp, pDbPage); + rc = copyPayload(&aPayload[offset+4], pBuf, a, (eOp&0x01), pDbPage); sqlite3PagerUnref(pDbPage); offset = 0; } @@ -54929,7 +56989,7 @@ /* ** Read part of the key associated with cursor pCur. Exactly -** "amt" bytes will be transfered into pBuf[]. The transfer +** "amt" bytes will be transferred into pBuf[]. The transfer ** begins at "offset". ** ** The caller must ensure that pCur is pointing to a valid row @@ -55004,12 +57064,9 @@ assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); assert( cursorHoldsMutex(pCur) ); assert( pCur->aiIdx[pCur->iPage]apPage[pCur->iPage]->nCell ); - if( pCur->info.nSize==0 ){ - btreeParseCell(pCur->apPage[pCur->iPage], pCur->aiIdx[pCur->iPage], - &pCur->info); - } + assert( pCur->info.nSize>0 ); *pAmt = pCur->info.nLocal; - return (void*)(pCur->info.pCell + pCur->info.nHeader); + return (void*)pCur->info.pPayload; } @@ -55058,14 +57115,14 @@ return SQLITE_CORRUPT_BKPT; } rc = getAndInitPage(pBt, newPgno, &pNewPage, - pCur->wrFlag==0 ? PAGER_GET_READONLY : 0); + (pCur->curFlags & BTCF_WriteFlag)==0 ? PAGER_GET_READONLY : 0); if( rc ) return rc; pCur->apPage[i+1] = pNewPage; pCur->aiIdx[i+1] = 0; pCur->iPage++; pCur->info.nSize = 0; - pCur->validNKey = 0; + pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); if( pNewPage->nCell<1 || pNewPage->intKey!=pCur->apPage[i]->intKey ){ return SQLITE_CORRUPT_BKPT; } @@ -55123,7 +57180,7 @@ releasePage(pCur->apPage[pCur->iPage]); pCur->iPage--; pCur->info.nSize = 0; - pCur->validNKey = 0; + pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); } /* @@ -55170,7 +57227,7 @@ return SQLITE_OK; }else{ rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->apPage[0], - pCur->wrFlag==0 ? PAGER_GET_READONLY : 0); + (pCur->curFlags & BTCF_WriteFlag)==0 ? PAGER_GET_READONLY : 0); if( rc!=SQLITE_OK ){ pCur->eState = CURSOR_INVALID; return rc; @@ -55197,8 +57254,7 @@ pCur->aiIdx[0] = 0; pCur->info.nSize = 0; - pCur->atLast = 0; - pCur->validNKey = 0; + pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidNKey|BTCF_ValidOvfl); if( pRoot->nCell>0 ){ pCur->eState = CURSOR_VALID; @@ -55253,17 +57309,16 @@ assert( cursorHoldsMutex(pCur) ); assert( pCur->eState==CURSOR_VALID ); - while( rc==SQLITE_OK && !(pPage = pCur->apPage[pCur->iPage])->leaf ){ + while( !(pPage = pCur->apPage[pCur->iPage])->leaf ){ pgno = get4byte(&pPage->aData[pPage->hdrOffset+8]); pCur->aiIdx[pCur->iPage] = pPage->nCell; rc = moveToChild(pCur, pgno); + if( rc ) return rc; } - if( rc==SQLITE_OK ){ - pCur->aiIdx[pCur->iPage] = pPage->nCell-1; - pCur->info.nSize = 0; - pCur->validNKey = 0; - } - return rc; + pCur->aiIdx[pCur->iPage] = pPage->nCell-1; + assert( pCur->info.nSize==0 ); + assert( (pCur->curFlags & BTCF_ValidNKey)==0 ); + return SQLITE_OK; } /* Move the cursor to the first entry in the table. Return SQLITE_OK @@ -55300,7 +57355,7 @@ assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); /* If the cursor already points to the last entry, this is a no-op. */ - if( CURSOR_VALID==pCur->eState && pCur->atLast ){ + if( CURSOR_VALID==pCur->eState && (pCur->curFlags & BTCF_AtLast)!=0 ){ #ifdef SQLITE_DEBUG /* This block serves to assert() that the cursor really does point ** to the last entry in the b-tree. */ @@ -55323,7 +57378,12 @@ assert( pCur->eState==CURSOR_VALID ); *pRes = 0; rc = moveToRightmost(pCur); - pCur->atLast = rc==SQLITE_OK ?1:0; + if( rc==SQLITE_OK ){ + pCur->curFlags |= BTCF_AtLast; + }else{ + pCur->curFlags &= ~BTCF_AtLast; + } + } } return rc; @@ -55374,21 +57434,22 @@ /* If the cursor is already positioned at the point we are trying ** to move to, then just return without doing any work */ - if( pCur->eState==CURSOR_VALID && pCur->validNKey + if( pCur->eState==CURSOR_VALID && (pCur->curFlags & BTCF_ValidNKey)!=0 && pCur->apPage[0]->intKey ){ if( pCur->info.nKey==intKey ){ *pRes = 0; return SQLITE_OK; } - if( pCur->atLast && pCur->info.nKeycurFlags & BTCF_AtLast)!=0 && pCur->info.nKeyerrCode = 0; assert( pIdxKey->default_rc==1 || pIdxKey->default_rc==0 || pIdxKey->default_rc==-1 @@ -55433,7 +57494,7 @@ for(;;){ i64 nCellKey; pCell = findCell(pPage, idx) + pPage->childPtrSize; - if( pPage->hasData ){ + if( pPage->intKeyLeaf ){ while( 0x80 <= *(pCell++) ){ if( pCell>=pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT; } @@ -55447,7 +57508,7 @@ if( lwr>upr ){ c = +1; break; } }else{ assert( nCellKey==intKey ); - pCur->validNKey = 1; + pCur->curFlags |= BTCF_ValidNKey; pCur->info.nKey = nCellKey; pCur->aiIdx[pCur->iPage] = (u16)idx; if( !pPage->leaf ){ @@ -55481,14 +57542,14 @@ ** single byte varint and the record fits entirely on the main ** b-tree page. */ testcase( pCell+nCell+1==pPage->aDataEnd ); - c = xRecordCompare(nCell, (void*)&pCell[1], pIdxKey, 0); + c = xRecordCompare(nCell, (void*)&pCell[1], pIdxKey); }else if( !(pCell[1] & 0x80) && (nCell = ((nCell&0x7f)<<7) + pCell[1])<=pPage->maxLocal ){ /* The record-size field is a 2 byte varint and the record ** fits entirely on the main b-tree page. */ testcase( pCell+nCell+2==pPage->aDataEnd ); - c = xRecordCompare(nCell, (void*)&pCell[2], pIdxKey, 0); + c = xRecordCompare(nCell, (void*)&pCell[2], pIdxKey); }else{ /* The record flows over onto one or more overflow pages. In ** this case the whole cell needs to be parsed, a buffer allocated @@ -55504,14 +57565,18 @@ goto moveto_finish; } pCur->aiIdx[pCur->iPage] = (u16)idx; - rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 0); + rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 2); if( rc ){ sqlite3_free(pCellKey); goto moveto_finish; } - c = xRecordCompare(nCell, pCellKey, pIdxKey, 0); + c = xRecordCompare(nCell, pCellKey, pIdxKey); sqlite3_free(pCellKey); } + assert( + (pIdxKey->errCode!=SQLITE_CORRUPT || c==0) + && (pIdxKey->errCode!=SQLITE_NOMEM || pCur->pBtree->db->mallocFailed) + ); if( c<0 ){ lwr = idx+1; }else if( c>0 ){ @@ -55521,6 +57586,7 @@ *pRes = 0; rc = SQLITE_OK; pCur->aiIdx[pCur->iPage] = (u16)idx; + if( pIdxKey->errCode ) rc = SQLITE_CORRUPT; goto moveto_finish; } if( lwr>upr ) break; @@ -55549,7 +57615,7 @@ } moveto_finish: pCur->info.nSize = 0; - pCur->validNKey = 0; + pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); return rc; } @@ -55575,6 +57641,12 @@ ** was already pointing to the last entry in the database before ** this routine was called, then set *pRes=1. ** +** The main entry point is sqlite3BtreeNext(). That routine is optimized +** for the common case of merely incrementing the cell counter BtCursor.aiIdx +** to the next cell on the current page. The (slower) btreeNext() helper +** routine is called when it is necessary to move to a different page or +** to restore the cursor. +** ** The calling function will set *pRes to 0 or 1. The initial *pRes value ** will be 1 if the cursor being stepped corresponds to an SQL index and ** if this routine could have been skipped if that SQL index had been @@ -55584,19 +57656,18 @@ ** SQLite btree implementation does not. (Note that the comdb2 btree ** implementation does use this hint, however.) */ -SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){ +static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){ int rc; int idx; MemPage *pPage; assert( cursorHoldsMutex(pCur) ); - assert( pRes!=0 ); - assert( *pRes==0 || *pRes==1 ); assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); + assert( *pRes==0 ); if( pCur->eState!=CURSOR_VALID ){ + assert( (pCur->curFlags & BTCF_ValidOvfl)==0 ); rc = restoreCursorPosition(pCur); if( rc!=SQLITE_OK ){ - *pRes = 0; return rc; } if( CURSOR_INVALID==pCur->eState ){ @@ -55608,7 +57679,6 @@ pCur->eState = CURSOR_VALID; if( pCur->skipNext>0 ){ pCur->skipNext = 0; - *pRes = 0; return SQLITE_OK; } pCur->skipNext = 0; @@ -55626,18 +57696,11 @@ ** page into more than one b-tree structure. */ testcase( idx>pPage->nCell ); - pCur->info.nSize = 0; - pCur->validNKey = 0; if( idx>=pPage->nCell ){ if( !pPage->leaf ){ rc = moveToChild(pCur, get4byte(&pPage->aData[pPage->hdrOffset+8])); - if( rc ){ - *pRes = 0; - return rc; - } - rc = moveToLeftmost(pCur); - *pRes = 0; - return rc; + if( rc ) return rc; + return moveToLeftmost(pCur); } do{ if( pCur->iPage==0 ){ @@ -55648,29 +57711,52 @@ moveToParent(pCur); pPage = pCur->apPage[pCur->iPage]; }while( pCur->aiIdx[pCur->iPage]>=pPage->nCell ); - *pRes = 0; if( pPage->intKey ){ - rc = sqlite3BtreeNext(pCur, pRes); + return sqlite3BtreeNext(pCur, pRes); }else{ - rc = SQLITE_OK; + return SQLITE_OK; } - return rc; } + if( pPage->leaf ){ + return SQLITE_OK; + }else{ + return moveToLeftmost(pCur); + } +} +SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){ + MemPage *pPage; + assert( cursorHoldsMutex(pCur) ); + assert( pRes!=0 ); + assert( *pRes==0 || *pRes==1 ); + assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); + pCur->info.nSize = 0; + pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); *pRes = 0; + if( pCur->eState!=CURSOR_VALID ) return btreeNext(pCur, pRes); + pPage = pCur->apPage[pCur->iPage]; + if( (++pCur->aiIdx[pCur->iPage])>=pPage->nCell ){ + pCur->aiIdx[pCur->iPage]--; + return btreeNext(pCur, pRes); + } if( pPage->leaf ){ return SQLITE_OK; + }else{ + return moveToLeftmost(pCur); } - rc = moveToLeftmost(pCur); - return rc; } - /* ** Step the cursor to the back to the previous entry in the database. If ** successful then set *pRes=0. If the cursor ** was already pointing to the first entry in the database before ** this routine was called, then set *pRes=1. ** +** The main entry point is sqlite3BtreePrevious(). That routine is optimized +** for the common case of merely decrementing the cell counter BtCursor.aiIdx +** to the previous cell on the current page. The (slower) btreePrevious() +** helper routine is called when it is necessary to move to a different page +** or to restore the cursor. +** ** The calling function will set *pRes to 0 or 1. The initial *pRes value ** will be 1 if the cursor being stepped corresponds to an SQL index and ** if this routine could have been skipped if that SQL index had been @@ -55680,22 +57766,20 @@ ** SQLite btree implementation does not. (Note that the comdb2 btree ** implementation does use this hint, however.) */ -SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int *pRes){ +static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur, int *pRes){ int rc; MemPage *pPage; assert( cursorHoldsMutex(pCur) ); assert( pRes!=0 ); - assert( *pRes==0 || *pRes==1 ); + assert( *pRes==0 ); assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); - pCur->atLast = 0; + assert( (pCur->curFlags & (BTCF_AtLast|BTCF_ValidOvfl|BTCF_ValidNKey))==0 ); + assert( pCur->info.nSize==0 ); if( pCur->eState!=CURSOR_VALID ){ - if( ALWAYS(pCur->eState>=CURSOR_REQUIRESEEK) ){ - rc = btreeRestoreCursorPosition(pCur); - if( rc!=SQLITE_OK ){ - *pRes = 0; - return rc; - } + rc = restoreCursorPosition(pCur); + if( rc!=SQLITE_OK ){ + return rc; } if( CURSOR_INVALID==pCur->eState ){ *pRes = 1; @@ -55706,7 +57790,6 @@ pCur->eState = CURSOR_VALID; if( pCur->skipNext<0 ){ pCur->skipNext = 0; - *pRes = 0; return SQLITE_OK; } pCur->skipNext = 0; @@ -55718,10 +57801,7 @@ if( !pPage->leaf ){ int idx = pCur->aiIdx[pCur->iPage]; rc = moveToChild(pCur, get4byte(findCell(pPage, idx))); - if( rc ){ - *pRes = 0; - return rc; - } + if( rc ) return rc; rc = moveToRightmost(pCur); }else{ while( pCur->aiIdx[pCur->iPage]==0 ){ @@ -55732,8 +57812,8 @@ } moveToParent(pCur); } - pCur->info.nSize = 0; - pCur->validNKey = 0; + assert( pCur->info.nSize==0 ); + assert( (pCur->curFlags & (BTCF_ValidNKey|BTCF_ValidOvfl))==0 ); pCur->aiIdx[pCur->iPage]--; pPage = pCur->apPage[pCur->iPage]; @@ -55743,9 +57823,25 @@ rc = SQLITE_OK; } } - *pRes = 0; return rc; } +SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int *pRes){ + assert( cursorHoldsMutex(pCur) ); + assert( pRes!=0 ); + assert( *pRes==0 || *pRes==1 ); + assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); + *pRes = 0; + pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidOvfl|BTCF_ValidNKey); + pCur->info.nSize = 0; + if( pCur->eState!=CURSOR_VALID + || pCur->aiIdx[pCur->iPage]==0 + || pCur->apPage[pCur->iPage]->leaf==0 + ){ + return btreePrevious(pCur, pRes); + } + pCur->aiIdx[pCur->iPage]--; + return SQLITE_OK; +} /* ** Allocate a new page from the database file. @@ -55789,6 +57885,8 @@ assert( eMode==BTALLOC_ANY || (nearby>0 && IfNotOmitAV(pBt->autoVacuum)) ); pPage1 = pBt->pPage1; mxPage = btreePagecount(pBt); + /* EVIDENCE-OF: R-05119-02637 The 4-byte big-endian integer at offset 36 + ** stores stores the total number of pages on the freelist. */ n = get4byte(&pPage1->aData[36]); testcase( n==mxPage-1 ); if( n>=mxPage ){ @@ -55835,8 +57933,14 @@ do { pPrevTrunk = pTrunk; if( pPrevTrunk ){ + /* EVIDENCE-OF: R-01506-11053 The first integer on a freelist trunk page + ** is the page number of the next freelist trunk page in the list or + ** zero if this is the last freelist trunk page. */ iTrunk = get4byte(&pPrevTrunk->aData[0]); }else{ + /* EVIDENCE-OF: R-59841-13798 The 4-byte big-endian integer at offset 32 + ** stores the page number of the first page of the freelist, or zero if + ** the freelist is empty. */ iTrunk = get4byte(&pPage1->aData[32]); } testcase( iTrunk==mxPage ); @@ -55851,8 +57955,9 @@ } assert( pTrunk!=0 ); assert( pTrunk->aData!=0 ); - - k = get4byte(&pTrunk->aData[4]); /* # of leaves on this trunk page */ + /* EVIDENCE-OF: R-13523-04394 The second integer on a freelist trunk page + ** is the number of leaf page pointers to follow. */ + k = get4byte(&pTrunk->aData[4]); if( k==0 && !searchList ){ /* The trunk has no leaves and the list is not being searched. ** So extract the trunk page itself and use it as the newly @@ -55986,7 +58091,7 @@ memcpy(&aData[8+closest*4], &aData[4+k*4], 4); } put4byte(&aData[4], k-1); - noContent = !btreeGetHasContent(pBt, *pPgno) ? PAGER_GET_NOCONTENT : 0; + noContent = !btreeGetHasContent(pBt, *pPgno)? PAGER_GET_NOCONTENT : 0; rc = btreeGetPage(pBt, *pPgno, ppPage, noContent); if( rc==SQLITE_OK ){ rc = sqlite3PagerWrite((*ppPage)->pDbPage); @@ -56019,7 +58124,7 @@ ** here are confined to those pages that lie between the end of the ** database image and the end of the database file. */ - int bNoContent = (0==IfNotOmitAV(pBt->bDoTruncate)) ? PAGER_GET_NOCONTENT : 0; + int bNoContent = (0==IfNotOmitAV(pBt->bDoTruncate))? PAGER_GET_NOCONTENT:0; rc = sqlite3PagerWrite(pBt->pPage1->pDbPage); if( rc ) return rc; @@ -56170,6 +58275,11 @@ ** for now. At some point in the future (once everyone has upgraded ** to 3.6.0 or later) we should consider fixing the conditional above ** to read "usableSize/4-2" instead of "usableSize/4-8". + ** + ** EVIDENCE-OF: R-19920-11576 However, newer versions of SQLite still + ** avoid using the last six entries in the freelist trunk page array in + ** order that database files created by newer versions of SQLite can be + ** read by older versions of SQLite. */ rc = sqlite3PagerWrite(pTrunk->pDbPage); if( rc==SQLITE_OK ){ @@ -56218,9 +58328,15 @@ } /* -** Free any overflow pages associated with the given Cell. +** Free any overflow pages associated with the given Cell. Write the +** local Cell size (the number of bytes on the original page, omitting +** overflow) into *pnSize. */ -static int clearCell(MemPage *pPage, unsigned char *pCell){ +static int clearCell( + MemPage *pPage, /* The page that contains the Cell */ + unsigned char *pCell, /* First byte of the Cell */ + u16 *pnSize /* Write the size of the Cell here */ +){ BtShared *pBt = pPage->pBt; CellInfo info; Pgno ovflPgno; @@ -56230,6 +58346,7 @@ assert( sqlite3_mutex_held(pPage->pBt->mutex) ); btreeParseCellPtr(pPage, pCell, &info); + *pnSize = info.nSize; if( info.iOverflow==0 ){ return SQLITE_OK; /* No overflow pages. Return without doing anything */ } @@ -56313,7 +58430,6 @@ BtShared *pBt = pPage->pBt; Pgno pgnoOvfl = 0; int nHeader; - CellInfo info; assert( sqlite3_mutex_held(pPage->pBt->mutex) ); @@ -56323,23 +58439,17 @@ || sqlite3PagerIswriteable(pPage->pDbPage) ); /* Fill in the header. */ - nHeader = 0; - if( !pPage->leaf ){ - nHeader += 4; - } - if( pPage->hasData ){ - nHeader += putVarint32(&pCell[nHeader], nData+nZero); + nHeader = pPage->childPtrSize; + nPayload = nData + nZero; + if( pPage->intKeyLeaf ){ + nHeader += putVarint32(&pCell[nHeader], nPayload); }else{ - nData = nZero = 0; + assert( nData==0 ); + assert( nZero==0 ); } nHeader += putVarint(&pCell[nHeader], *(u64*)&nKey); - btreeParseCellPtr(pPage, pCell, &info); - assert( info.nHeader==nHeader ); - assert( info.nKey==nKey ); - assert( info.nData==(u32)(nData+nZero) ); - /* Fill in the payload */ - nPayload = nData + nZero; + /* Fill in the payload size */ if( pPage->intKey ){ pSrc = pData; nSrc = nData; @@ -56348,15 +58458,55 @@ if( NEVER(nKey>0x7fffffff || pKey==0) ){ return SQLITE_CORRUPT_BKPT; } - nPayload += (int)nKey; + nPayload = (int)nKey; pSrc = pKey; nSrc = (int)nKey; } - *pnSize = info.nSize; - spaceLeft = info.nLocal; + if( nPayload<=pPage->maxLocal ){ + n = nHeader + nPayload; + testcase( n==3 ); + testcase( n==4 ); + if( n<4 ) n = 4; + *pnSize = n; + spaceLeft = nPayload; + pPrior = pCell; + }else{ + int mn = pPage->minLocal; + n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4); + testcase( n==pPage->maxLocal ); + testcase( n==pPage->maxLocal+1 ); + if( n > pPage->maxLocal ) n = mn; + spaceLeft = n; + *pnSize = n + nHeader + 4; + pPrior = &pCell[nHeader+n]; + } pPayload = &pCell[nHeader]; - pPrior = &pCell[info.iOverflow]; + /* At this point variables should be set as follows: + ** + ** nPayload Total payload size in bytes + ** pPayload Begin writing payload here + ** spaceLeft Space available at pPayload. If nPayload>spaceLeft, + ** that means content must spill into overflow pages. + ** *pnSize Size of the local cell (not counting overflow pages) + ** pPrior Where to write the pgno of the first overflow page + ** + ** Use a call to btreeParseCellPtr() to verify that the values above + ** were computed correctly. + */ +#if SQLITE_DEBUG + { + CellInfo info; + btreeParseCellPtr(pPage, pCell, &info); + assert( nHeader=(int)(info.pPayload - pCell) ); + assert( info.nKey==nKey ); + assert( *pnSize == info.nSize ); + assert( spaceLeft == info.nLocal ); + assert( pPrior == &pCell[info.iOverflow] ); + } +#endif + + /* Write the payload into the local Cell and any extra into overflow pages */ while( nPayload>0 ){ if( spaceLeft==0 ){ #ifndef SQLITE_OMIT_AUTOVACUUM @@ -56481,9 +58631,17 @@ return; } pPage->nCell--; - memmove(ptr, ptr+2, 2*(pPage->nCell - idx)); - put2byte(&data[hdr+3], pPage->nCell); - pPage->nFree += 2; + if( pPage->nCell==0 ){ + memset(&data[hdr+1], 0, 4); + data[hdr+7] = 0; + put2byte(&data[hdr+5], pPage->pBt->usableSize); + pPage->nFree = pPage->pBt->usableSize - pPage->hdrOffset + - pPage->childPtrSize - 8; + }else{ + memmove(ptr, ptr+2, 2*(pPage->nCell - idx)); + put2byte(&data[hdr+3], pPage->nCell); + pPage->nFree += 2; + } } /* @@ -56497,11 +58655,6 @@ ** in pTemp or the original pCell) and also record its index. ** Allocating a new entry in pPage->aCell[] implies that ** pPage->nOverflow is incremented. -** -** If nSkip is non-zero, then do not copy the first nSkip bytes of the -** cell. The caller will overwrite them after this function returns. If -** nSkip is non-zero, then pCell may not point to an invalid memory location -** (but pCell+nSkip is always valid). */ static void insertCell( MemPage *pPage, /* Page into which we are copying */ @@ -56518,12 +58671,12 @@ int ins; /* Index in data[] where new cell pointer is inserted */ int cellOffset; /* Address of first cell pointer in data[] */ u8 *data; /* The content of the whole page */ - int nSkip = (iChild ? 4 : 0); if( *pRC ) return; assert( i>=0 && i<=pPage->nCell+pPage->nOverflow ); - assert( pPage->nCell<=MX_CELL(pPage->pBt) && MX_CELL(pPage->pBt)<=10921 ); + assert( MX_CELL(pPage->pBt)<=10921 ); + assert( pPage->nCell<=MX_CELL(pPage->pBt) || CORRUPT_DB ); assert( pPage->nOverflow<=ArraySize(pPage->apOvfl) ); assert( ArraySize(pPage->apOvfl)==ArraySize(pPage->aiOvfl) ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); @@ -56535,7 +58688,7 @@ assert( sz==cellSizePtr(pPage, pCell) || (sz==8 && iChild>0) ); if( pPage->nOverflow || sz+2>pPage->nFree ){ if( pTemp ){ - memcpy(pTemp+nSkip, pCell+nSkip, sz-nSkip); + memcpy(pTemp, pCell, sz); pCell = pTemp; } if( iChild ){ @@ -56564,7 +58717,7 @@ assert( idx+sz <= (int)pPage->pBt->usableSize ); pPage->nCell++; pPage->nFree -= (u16)(2 + sz); - memcpy(&data[idx+nSkip], pCell+nSkip, sz-nSkip); + memcpy(&data[idx], pCell, sz); if( iChild ){ put4byte(&data[idx], iChild); } @@ -56583,48 +58736,274 @@ } /* -** Add a list of cells to a page. The page should be initially empty. -** The cells are guaranteed to fit on the page. +** Array apCell[] contains pointers to nCell b-tree page cells. The +** szCell[] array contains the size in bytes of each cell. This function +** replaces the current contents of page pPg with the contents of the cell +** array. +** +** Some of the cells in apCell[] may currently be stored in pPg. This +** function works around problems caused by this by making a copy of any +** such cells before overwriting the page data. +** +** The MemPage.nFree field is invalidated by this function. It is the +** responsibility of the caller to set it correctly. */ -static void assemblePage( - MemPage *pPage, /* The page to be assemblied */ - int nCell, /* The number of cells to add to this page */ - u8 **apCell, /* Pointers to cell bodies */ - u16 *aSize /* Sizes of the cells */ +static void rebuildPage( + MemPage *pPg, /* Edit this page */ + int nCell, /* Final number of cells on page */ + u8 **apCell, /* Array of cells */ + u16 *szCell /* Array of cell sizes */ ){ - int i; /* Loop counter */ - u8 *pCellptr; /* Address of next cell pointer */ - int cellbody; /* Address of next cell body */ - u8 * const data = pPage->aData; /* Pointer to data for pPage */ - const int hdr = pPage->hdrOffset; /* Offset of header on pPage */ - const int nUsable = pPage->pBt->usableSize; /* Usable size of page */ + const int hdr = pPg->hdrOffset; /* Offset of header on pPg */ + u8 * const aData = pPg->aData; /* Pointer to data for pPg */ + const int usableSize = pPg->pBt->usableSize; + u8 * const pEnd = &aData[usableSize]; + int i; + u8 *pCellptr = pPg->aCellIdx; + u8 *pTmp = sqlite3PagerTempSpace(pPg->pBt->pPager); + u8 *pData; - assert( pPage->nOverflow==0 ); - assert( sqlite3_mutex_held(pPage->pBt->mutex) ); - assert( nCell>=0 && nCell<=(int)MX_CELL(pPage->pBt) - && (int)MX_CELL(pPage->pBt)<=10921); - assert( sqlite3PagerIswriteable(pPage->pDbPage) ); + i = get2byte(&aData[hdr+5]); + memcpy(&pTmp[i], &aData[i], usableSize - i); - /* Check that the page has just been zeroed by zeroPage() */ - assert( pPage->nCell==0 ); - assert( get2byteNotZero(&data[hdr+5])==nUsable ); + pData = pEnd; + for(i=0; iaData && pCellaCellIdx[nCell*2]; - cellbody = nUsable; - for(i=nCell-1; i>=0; i--){ - u16 sz = aSize[i]; - pCellptr -= 2; - cellbody -= sz; - put2byte(pCellptr, cellbody); - memcpy(&data[cellbody], apCell[i], sz); + /* The pPg->nFree field is now set incorrectly. The caller will fix it. */ + pPg->nCell = nCell; + pPg->nOverflow = 0; + + put2byte(&aData[hdr+1], 0); + put2byte(&aData[hdr+3], pPg->nCell); + put2byte(&aData[hdr+5], pData - aData); + aData[hdr+7] = 0x00; +} + +/* +** Array apCell[] contains nCell pointers to b-tree cells. Array szCell +** contains the size in bytes of each such cell. This function attempts to +** add the cells stored in the array to page pPg. If it cannot (because +** the page needs to be defragmented before the cells will fit), non-zero +** is returned. Otherwise, if the cells are added successfully, zero is +** returned. +** +** Argument pCellptr points to the first entry in the cell-pointer array +** (part of page pPg) to populate. After cell apCell[0] is written to the +** page body, a 16-bit offset is written to pCellptr. And so on, for each +** cell in the array. It is the responsibility of the caller to ensure +** that it is safe to overwrite this part of the cell-pointer array. +** +** When this function is called, *ppData points to the start of the +** content area on page pPg. If the size of the content area is extended, +** *ppData is updated to point to the new start of the content area +** before returning. +** +** Finally, argument pBegin points to the byte immediately following the +** end of the space required by this page for the cell-pointer area (for +** all cells - not just those inserted by the current call). If the content +** area must be extended to before this point in order to accomodate all +** cells in apCell[], then the cells do not fit and non-zero is returned. +*/ +static int pageInsertArray( + MemPage *pPg, /* Page to add cells to */ + u8 *pBegin, /* End of cell-pointer array */ + u8 **ppData, /* IN/OUT: Page content -area pointer */ + u8 *pCellptr, /* Pointer to cell-pointer area */ + int nCell, /* Number of cells to add to pPg */ + u8 **apCell, /* Array of cells */ + u16 *szCell /* Array of cell sizes */ +){ + int i; + u8 *aData = pPg->aData; + u8 *pData = *ppData; + const int bFreelist = aData[1] || aData[2]; + assert( CORRUPT_DB || pPg->hdrOffset==0 ); /* Never called on page 1 */ + for(i=0; inFree -= (nCell*2 + nUsable - cellbody); - pPage->nCell = (u16)nCell; + *ppData = pData; + return 0; } /* +** Array apCell[] contains nCell pointers to b-tree cells. Array szCell +** contains the size in bytes of each such cell. This function adds the +** space associated with each cell in the array that is currently stored +** within the body of pPg to the pPg free-list. The cell-pointers and other +** fields of the page are not updated. +** +** This function returns the total number of cells added to the free-list. +*/ +static int pageFreeArray( + MemPage *pPg, /* Page to edit */ + int nCell, /* Cells to delete */ + u8 **apCell, /* Array of cells */ + u16 *szCell /* Array of cell sizes */ +){ + u8 * const aData = pPg->aData; + u8 * const pEnd = &aData[pPg->pBt->usableSize]; + u8 * const pStart = &aData[pPg->hdrOffset + 8 + pPg->childPtrSize]; + int nRet = 0; + int i; + u8 *pFree = 0; + int szFree = 0; + + for(i=0; i=pStart && pCellaData && (pFree - aData)<65536 ); + freeSpace(pPg, (u16)(pFree - aData), szFree); + } + pFree = pCell; + szFree = sz; + if( pFree+sz>pEnd ) return 0; + }else{ + pFree = pCell; + szFree += sz; + } + nRet++; + } + } + if( pFree ){ + assert( pFree>aData && (pFree - aData)<65536 ); + freeSpace(pPg, (u16)(pFree - aData), szFree); + } + return nRet; +} + +/* +** apCell[] and szCell[] contains pointers to and sizes of all cells in the +** pages being balanced. The current page, pPg, has pPg->nCell cells starting +** with apCell[iOld]. After balancing, this page should hold nNew cells +** starting at apCell[iNew]. +** +** This routine makes the necessary adjustments to pPg so that it contains +** the correct cells after being balanced. +** +** The pPg->nFree field is invalid when this function returns. It is the +** responsibility of the caller to set it correctly. +*/ +static void editPage( + MemPage *pPg, /* Edit this page */ + int iOld, /* Index of first cell currently on page */ + int iNew, /* Index of new first cell on page */ + int nNew, /* Final number of cells on page */ + u8 **apCell, /* Array of cells */ + u16 *szCell /* Array of cell sizes */ +){ + u8 * const aData = pPg->aData; + const int hdr = pPg->hdrOffset; + u8 *pBegin = &pPg->aCellIdx[nNew * 2]; + int nCell = pPg->nCell; /* Cells stored on pPg */ + u8 *pData; + u8 *pCellptr; + int i; + int iOldEnd = iOld + pPg->nCell + pPg->nOverflow; + int iNewEnd = iNew + nNew; + +#ifdef SQLITE_DEBUG + u8 *pTmp = sqlite3PagerTempSpace(pPg->pBt->pPager); + memcpy(pTmp, aData, pPg->pBt->usableSize); +#endif + + /* Remove cells from the start and end of the page */ + if( iOldaCellIdx, &pPg->aCellIdx[nShift*2], nCell*2); + nCell -= nShift; + } + if( iNewEnd < iOldEnd ){ + nCell -= pageFreeArray( + pPg, iOldEnd-iNewEnd, &apCell[iNewEnd], &szCell[iNewEnd] + ); + } + + pData = &aData[get2byteNotZero(&aData[hdr+5])]; + if( pDataaCellIdx; + memmove(&pCellptr[nAdd*2], pCellptr, nCell*2); + if( pageInsertArray( + pPg, pBegin, &pData, pCellptr, + nAdd, &apCell[iNew], &szCell[iNew] + ) ) goto editpage_fail; + nCell += nAdd; + } + + /* Add any overflow cells */ + for(i=0; inOverflow; i++){ + int iCell = (iOld + pPg->aiOvfl[i]) - iNew; + if( iCell>=0 && iCellaCellIdx[iCell * 2]; + memmove(&pCellptr[2], pCellptr, (nCell - iCell) * 2); + nCell++; + if( pageInsertArray( + pPg, pBegin, &pData, pCellptr, + 1, &apCell[iCell + iNew], &szCell[iCell + iNew] + ) ) goto editpage_fail; + } + } + + /* Append cells to the end of the page */ + pCellptr = &pPg->aCellIdx[nCell*2]; + if( pageInsertArray( + pPg, pBegin, &pData, pCellptr, + nNew-nCell, &apCell[iNew+nCell], &szCell[iNew+nCell] + ) ) goto editpage_fail; + + pPg->nCell = nNew; + pPg->nOverflow = 0; + + put2byte(&aData[hdr+3], pPg->nCell); + put2byte(&aData[hdr+5], pData - aData); + +#ifdef SQLITE_DEBUG + for(i=0; iaCellIdx[i*2]); + if( pCell>=aData && pCell<&aData[pPg->pBt->usableSize] ){ + pCell = &pTmp[pCell - aData]; + } + assert( 0==memcmp(pCell, &aData[iOff], szCell[i+iNew]) ); + } +#endif + + return; + editpage_fail: + /* Unable to edit this page. Rebuild it from scratch instead. */ + rebuildPage(pPg, nNew, &apCell[iNew], &szCell[iNew]); +} + +/* ** The following parameters determine how many adjacent pages get involved ** in a balancing operation. NN is the number of neighbors on either side ** of the page that participate in the balancing operation. NB is the @@ -56675,7 +59054,7 @@ assert( pPage->nOverflow==1 ); /* This error condition is now caught prior to reaching this function */ - if( pPage->nCell==0 ) return SQLITE_CORRUPT_BKPT; + if( NEVER(pPage->nCell==0) ) return SQLITE_CORRUPT_BKPT; /* Allocate a new page. This page will become the right-sibling of ** pPage. Make the parent page writable, so that the new divider cell @@ -56693,7 +59072,8 @@ assert( sqlite3PagerIswriteable(pNew->pDbPage) ); assert( pPage->aData[0]==(PTF_INTKEY|PTF_LEAFDATA|PTF_LEAF) ); zeroPage(pNew, PTF_INTKEY|PTF_LEAFDATA|PTF_LEAF); - assemblePage(pNew, 1, &pCell, &szCell); + rebuildPage(pNew, 1, &pCell, &szCell); + pNew->nFree = pBt->usableSize - pNew->cellOffset - 2 - szCell; /* If this is an auto-vacuum database, update the pointer map ** with entries for the new page, and any pointer from the @@ -56912,17 +59292,22 @@ int iOvflSpace = 0; /* First unused byte of aOvflSpace[] */ int szScratch; /* Size of scratch memory requested */ MemPage *apOld[NB]; /* pPage and up to two siblings */ - MemPage *apCopy[NB]; /* Private copies of apOld[] pages */ MemPage *apNew[NB+2]; /* pPage and up to NB siblings after balancing */ u8 *pRight; /* Location in parent of right-sibling pointer */ u8 *apDiv[NB-1]; /* Divider cells in pParent */ int cntNew[NB+2]; /* Index in aCell[] of cell after i-th page */ - int szNew[NB+2]; /* Combined size of cells place on i-th page */ + int cntOld[NB+2]; /* Old index in aCell[] after i-th page */ + int szNew[NB+2]; /* Combined size of cells placed on i-th page */ u8 **apCell = 0; /* All cells begin balanced */ u16 *szCell; /* Local size of all cells in apCell[] */ u8 *aSpace1; /* Space for copies of dividers cells */ Pgno pgno; /* Temp var to store a page number in */ + u8 abDone[NB+2]; /* True after i'th new page is populated */ + Pgno aPgno[NB+2]; /* Page numbers of new pages before shuffling */ + Pgno aPgOrder[NB+2]; /* Copy of aPgno[] used for sorting pages */ + u16 aPgFlags[NB+2]; /* flags field of new pages before shuffling */ + memset(abDone, 0, sizeof(abDone)); pBt = pParent->pBt; assert( sqlite3_mutex_held(pBt->mutex) ); assert( sqlite3PagerIswriteable(pParent->pDbPage) ); @@ -57031,12 +59416,14 @@ /* ** Allocate space for memory structures */ - k = pBt->pageSize + ROUND8(sizeof(MemPage)); szScratch = nMaxCells*sizeof(u8*) /* apCell */ + nMaxCells*sizeof(u16) /* szCell */ - + pBt->pageSize /* aSpace1 */ - + k*nOld; /* Page copies (apCopy) */ + + pBt->pageSize; /* aSpace1 */ + + /* EVIDENCE-OF: R-28375-38319 SQLite will never request a scratch buffer + ** that is more than 6 times the database page size. */ + assert( szScratch<=6*(int)pBt->pageSize ); apCell = sqlite3ScratchMalloc( szScratch ); if( apCell==0 ){ rc = SQLITE_NOMEM; @@ -57049,8 +59436,8 @@ /* ** Load pointers to all cells on sibling pages and the divider cells ** into the local apCell[] array. Make copies of the divider cells - ** into space obtained from aSpace1[] and remove the divider cells - ** from pParent. + ** into space obtained from aSpace1[]. The divider cells have already + ** been removed from pParent. ** ** If the siblings are on leaf pages, then the child pointers of the ** divider cells are stripped from the cells before they are copied @@ -57063,18 +59450,10 @@ ** leafData: 1 if pPage holds key+data and pParent holds only keys. */ leafCorrection = apOld[0]->leaf*4; - leafData = apOld[0]->hasData; + leafData = apOld[0]->intKeyLeaf; for(i=0; ipageSize + k*i]; - memcpy(pOld, apOld[i], sizeof(MemPage)); - pOld->aData = (void*)&pOld[1]; - memcpy(pOld->aData, apOld[i]->aData, pBt->pageSize); + MemPage *pOld = apOld[i]; limit = pOld->nCell+pOld->nOverflow; if( pOld->nOverflow>0 ){ @@ -57095,6 +59474,7 @@ nCell++; } } + cntOld[i] = nCell; if( i usableSpace ){ - szNew[k] = subtotal - szCell[i]; + szNew[k] = subtotal - szCell[i] - 2; cntNew[k] = i; if( leafData ){ i--; } subtotal = 0; @@ -57160,9 +59544,10 @@ /* ** The packing computed by the previous block is biased toward the siblings - ** on the left side. The left siblings are always nearly full, while the - ** right-most sibling might be nearly empty. This block of code attempts - ** to adjust the packing of siblings to get a better balance. + ** on the left side (siblings with smaller keys). The left siblings are + ** always nearly full, while the right-most sibling might be nearly empty. + ** The next block of code attempts to adjust the packing of siblings to + ** get a better balance. ** ** This adjustment is more than an optimization. The packing above might ** be so out of balance as to be illegal. For example, the right-most @@ -57191,22 +59576,18 @@ szNew[i-1] = szLeft; } - /* Either we found one or more cells (cntnew[0])>0) or pPage is - ** a virtual root page. A virtual root page is when the real root - ** page is page 1 and we are the only child of that page. - ** - ** UPDATE: The assert() below is not necessarily true if the database - ** file is corrupt. The corruption will be detected and reported later - ** in this procedure so there is no need to act upon it now. + /* Sanity check: For a non-corrupt database file one of the follwing + ** must be true: + ** (1) We found one or more cells (cntNew[0])>0), or + ** (2) pPage is a virtual root page. A virtual root page is when + ** the real root page is page 1 and we are the only child of + ** that page. */ -#if 0 - assert( cntNew[0]>0 || (pParent->pgno==1 && pParent->nCell==0) ); -#endif - - TRACE(("BALANCE: old: %d %d %d ", - apOld[0]->pgno, - nOld>=2 ? apOld[1]->pgno : 0, - nOld>=3 ? apOld[2]->pgno : 0 + assert( cntNew[0]>0 || (pParent->pgno==1 && pParent->nCell==0) || CORRUPT_DB); + TRACE(("BALANCE: old: %d(nc=%d) %d(nc=%d) %d(nc=%d)\n", + apOld[0]->pgno, apOld[0]->nCell, + nOld>=2 ? apOld[1]->pgno : 0, nOld>=2 ? apOld[1]->nCell : 0, + nOld>=3 ? apOld[2]->pgno : 0, nOld>=3 ? apOld[2]->nCell : 0 )); /* @@ -57229,8 +59610,10 @@ assert( i>0 ); rc = allocateBtreePage(pBt, &pNew, &pgno, (bBulk ? 1 : pgno), 0); if( rc ) goto balance_cleanup; + zeroPage(pNew, pageFlags); apNew[i] = pNew; nNew++; + cntOld[i] = nCell; /* Set the pointer-map entry for the new sibling page. */ if( ISAUTOVACUUM ){ @@ -57242,135 +59625,247 @@ } } - /* Free any old pages that were not reused as new pages. - */ - while( ipgno; - int minI = i; - for(j=i+1; jpgno<(unsigned)minV ){ - minI = j; - minV = apNew[j]->pgno; + for(i=0; ipgno; + aPgFlags[i] = apNew[i]->pDbPage->flags; + for(j=0; ji ){ - MemPage *pT; - pT = apNew[i]; - apNew[i] = apNew[minI]; - apNew[minI] = pT; + } + for(i=0; ii ){ + sqlite3PagerRekey(apNew[iBest]->pDbPage, pBt->nPage+iBest+1, 0); + } + sqlite3PagerRekey(apNew[i]->pDbPage, pgno, aPgFlags[iBest]); + apNew[i]->pgno = pgno; + } } - TRACE(("new: %d(%d) %d(%d) %d(%d) %d(%d) %d(%d)\n", - apNew[0]->pgno, szNew[0], + + TRACE(("BALANCE: new: %d(%d nc=%d) %d(%d nc=%d) %d(%d nc=%d) " + "%d(%d nc=%d) %d(%d nc=%d)\n", + apNew[0]->pgno, szNew[0], cntNew[0], nNew>=2 ? apNew[1]->pgno : 0, nNew>=2 ? szNew[1] : 0, + nNew>=2 ? cntNew[1] - cntNew[0] - !leafData : 0, nNew>=3 ? apNew[2]->pgno : 0, nNew>=3 ? szNew[2] : 0, + nNew>=3 ? cntNew[2] - cntNew[1] - !leafData : 0, nNew>=4 ? apNew[3]->pgno : 0, nNew>=4 ? szNew[3] : 0, - nNew>=5 ? apNew[4]->pgno : 0, nNew>=5 ? szNew[4] : 0)); + nNew>=4 ? cntNew[3] - cntNew[2] - !leafData : 0, + nNew>=5 ? apNew[4]->pgno : 0, nNew>=5 ? szNew[4] : 0, + nNew>=5 ? cntNew[4] - cntNew[3] - !leafData : 0 + )); assert( sqlite3PagerIswriteable(pParent->pDbPage) ); put4byte(pRight, apNew[nNew-1]->pgno); - /* - ** Evenly distribute the data in apCell[] across the new pages. - ** Insert divider cells into pParent as necessary. + /* If the sibling pages are not leaves, ensure that the right-child pointer + ** of the right-most new sibling page is set to the value that was + ** originally in the same field of the right-most old sibling page. */ + if( (pageFlags & PTF_LEAF)==0 && nOld!=nNew ){ + MemPage *pOld = (nNew>nOld ? apNew : apOld)[nOld-1]; + memcpy(&apNew[nNew-1]->aData[8], &pOld->aData[8], 4); + } + + /* Make any required updates to pointer map entries associated with + ** cells stored on sibling pages following the balance operation. Pointer + ** map entries associated with divider cells are set by the insertCell() + ** routine. The associated pointer map entries are: + ** + ** a) if the cell contains a reference to an overflow chain, the + ** entry associated with the first page in the overflow chain, and + ** + ** b) if the sibling pages are not leaves, the child page associated + ** with the cell. + ** + ** If the sibling pages are not leaves, then the pointer map entry + ** associated with the right-child of each sibling may also need to be + ** updated. This happens below, after the sibling pages have been + ** populated, not here. */ - j = 0; - for(i=0; iaData; + int cntOldNext = pNew->nCell + pNew->nOverflow; + int usableSize = pBt->usableSize; + int iNew = 0; + int iOld = 0; + + for(i=0; inCell + pOld->nOverflow + !leafData; + aOld = pOld->aData; + } + if( i==cntNew[iNew] ){ + pNew = apNew[++iNew]; + if( !leafData ) continue; + } + + /* Cell pCell is destined for new sibling page pNew. Originally, it + ** was either part of sibling page iOld (possibly an overflow cell), + ** or else the divider cell to the left of sibling page iOld. So, + ** if sibling page iOld had the same page number as pNew, and if + ** pCell really was a part of sibling page iOld (not a divider or + ** overflow cell), we can skip updating the pointer map entries. */ + if( iOld>=nNew + || pNew->pgno!=aPgno[iOld] + || pCell=&aOld[usableSize] + ){ + if( !leafCorrection ){ + ptrmapPut(pBt, get4byte(pCell), PTRMAP_BTREE, pNew->pgno, &rc); + } + if( szCell[i]>pNew->minLocal ){ + ptrmapPutOvflPtr(pNew, pCell, &rc); + } + } + } + } + + /* Insert new divider cells into pParent. */ + for(i=0; inCell>0 || (nNew==1 && cntNew[0]==0) ); - assert( pNew->nOverflow==0 ); + pCell = apCell[j]; + sz = szCell[j] + leafCorrection; + pTemp = &aOvflSpace[iOvflSpace]; + if( !pNew->leaf ){ + memcpy(&pNew->aData[8], pCell, 4); + }else if( leafData ){ + /* If the tree is a leaf-data tree, and the siblings are leaves, + ** then there is no divider cell in apCell[]. Instead, the divider + ** cell consists of the integer key for the right-most cell of + ** the sibling-page assembled above only. + */ + CellInfo info; + j--; + btreeParseCellPtr(pNew, apCell[j], &info); + pCell = pTemp; + sz = 4 + putVarint(&pCell[4], info.nKey); + pTemp = 0; + }else{ + pCell -= 4; + /* Obscure case for non-leaf-data trees: If the cell at pCell was + ** previously stored on a leaf node, and its reported size was 4 + ** bytes, then it may actually be smaller than this + ** (see btreeParseCellPtr(), 4 bytes is the minimum size of + ** any cell). But it is important to pass the correct size to + ** insertCell(), so reparse the cell now. + ** + ** Note that this can never happen in an SQLite data file, as all + ** cells are at least 4 bytes. It only happens in b-trees used + ** to evaluate "IN (SELECT ...)" and similar clauses. + */ + if( szCell[j]==4 ){ + assert(leafCorrection==4); + sz = cellSizePtr(pParent, pCell); + } + } + iOvflSpace += sz; + assert( sz<=pBt->maxLocal+23 ); + assert( iOvflSpace <= (int)pBt->pageSize ); + insertCell(pParent, nxDiv+i, pCell, sz, pTemp, pNew->pgno, &rc); + if( rc!=SQLITE_OK ) goto balance_cleanup; + assert( sqlite3PagerIswriteable(pParent->pDbPage) ); + } - j = cntNew[i]; + /* Now update the actual sibling pages. The order in which they are updated + ** is important, as this code needs to avoid disrupting any page from which + ** cells may still to be read. In practice, this means: + ** + ** (1) If cells are moving left (from apNew[iPg] to apNew[iPg-1]) + ** then it is not safe to update page apNew[iPg] until after + ** the left-hand sibling apNew[iPg-1] has been updated. + ** + ** (2) If cells are moving right (from apNew[iPg] to apNew[iPg+1]) + ** then it is not safe to update page apNew[iPg] until after + ** the right-hand sibling apNew[iPg+1] has been updated. + ** + ** If neither of the above apply, the page is safe to update. + ** + ** The iPg value in the following loop starts at nNew-1 goes down + ** to 0, then back up to nNew-1 again, thus making two passes over + ** the pages. On the initial downward pass, only condition (1) above + ** needs to be tested because (2) will always be true from the previous + ** step. On the upward pass, both conditions are always true, so the + ** upwards pass simply processes pages that were missed on the downward + ** pass. + */ + for(i=1-nNew; i=0 && iPg=0 /* On the upwards pass, or... */ + || cntOld[iPg-1]>=cntNew[iPg-1] /* Condition (1) is true */ + ){ + int iNew; + int iOld; + int nNewCell; - /* If the sibling page assembled above was not the right-most sibling, - ** insert a divider cell into the parent page. - */ - assert( i=cntNew[iPg-1] || abDone[iPg-1] ); - assert( jleaf ){ - memcpy(&pNew->aData[8], pCell, 4); - }else if( leafData ){ - /* If the tree is a leaf-data tree, and the siblings are leaves, - ** then there is no divider cell in apCell[]. Instead, the divider - ** cell consists of the integer key for the right-most cell of - ** the sibling-page assembled above only. - */ - CellInfo info; - j--; - btreeParseCellPtr(pNew, apCell[j], &info); - pCell = pTemp; - sz = 4 + putVarint(&pCell[4], info.nKey); - pTemp = 0; + /* Verify condition (2): If cells are moving right, update iPg + ** only after iPg+1 has already been updated. */ + assert( cntNew[iPg]>=cntOld[iPg] || abDone[iPg+1] ); + + if( iPg==0 ){ + iNew = iOld = 0; + nNewCell = cntNew[0]; }else{ - pCell -= 4; - /* Obscure case for non-leaf-data trees: If the cell at pCell was - ** previously stored on a leaf node, and its reported size was 4 - ** bytes, then it may actually be smaller than this - ** (see btreeParseCellPtr(), 4 bytes is the minimum size of - ** any cell). But it is important to pass the correct size to - ** insertCell(), so reparse the cell now. - ** - ** Note that this can never happen in an SQLite data file, as all - ** cells are at least 4 bytes. It only happens in b-trees used - ** to evaluate "IN (SELECT ...)" and similar clauses. - */ - if( szCell[j]==4 ){ - assert(leafCorrection==4); - sz = cellSizePtr(pParent, pCell); - } + iOld = iPgmaxLocal+23 ); - assert( iOvflSpace <= (int)pBt->pageSize ); - insertCell(pParent, nxDiv, pCell, sz, pTemp, pNew->pgno, &rc); - if( rc!=SQLITE_OK ) goto balance_cleanup; - assert( sqlite3PagerIswriteable(pParent->pDbPage) ); - j++; - nxDiv++; + editPage(apNew[iPg], iOld, iNew, nNewCell, apCell, szCell); + abDone[iPg]++; + apNew[iPg]->nFree = usableSpace-szNew[iPg]; + assert( apNew[iPg]->nOverflow==0 ); + assert( apNew[iPg]->nCell==nNewCell ); } } - assert( j==nCell ); + + /* All pages have been processed exactly once */ + assert( memcmp(abDone, "\01\01\01\01\01", nNew)==0 ); + assert( nOld>0 ); assert( nNew>0 ); - if( (pageFlags & PTF_LEAF)==0 ){ - u8 *zChild = &apCopy[nOld-1]->aData[8]; - memcpy(&apNew[nNew-1]->aData[8], zChild, 4); - } if( isRoot && pParent->nCell==0 && pParent->hdrOffset<=apNew[0]->nFree ){ /* The root page of the b-tree now contains no cells. The only sibling @@ -57383,127 +59878,51 @@ ** sets all pointer-map entries corresponding to database image pages ** for which the pointer is stored within the content being copied. ** - ** The second assert below verifies that the child page is defragmented - ** (it must be, as it was just reconstructed using assemblePage()). This - ** is important if the parent page happens to be page 1 of the database - ** image. */ + ** It is critical that the child page be defragmented before being + ** copied into the parent, because if the parent is page 1 then it will + ** by smaller than the child due to the database header, and so all the + ** free space needs to be up front. + */ assert( nNew==1 ); + rc = defragmentPage(apNew[0]); + testcase( rc!=SQLITE_OK ); assert( apNew[0]->nFree == - (get2byte(&apNew[0]->aData[5])-apNew[0]->cellOffset-apNew[0]->nCell*2) + (get2byte(&apNew[0]->aData[5])-apNew[0]->cellOffset-apNew[0]->nCell*2) + || rc!=SQLITE_OK ); copyNodeContent(apNew[0], pParent, &rc); freePage(apNew[0], &rc); - }else if( ISAUTOVACUUM ){ - /* Fix the pointer-map entries for all the cells that were shifted around. - ** There are several different types of pointer-map entries that need to - ** be dealt with by this routine. Some of these have been set already, but - ** many have not. The following is a summary: - ** - ** 1) The entries associated with new sibling pages that were not - ** siblings when this function was called. These have already - ** been set. We don't need to worry about old siblings that were - ** moved to the free-list - the freePage() code has taken care - ** of those. - ** - ** 2) The pointer-map entries associated with the first overflow - ** page in any overflow chains used by new divider cells. These - ** have also already been taken care of by the insertCell() code. - ** - ** 3) If the sibling pages are not leaves, then the child pages of - ** cells stored on the sibling pages may need to be updated. - ** - ** 4) If the sibling pages are not internal intkey nodes, then any - ** overflow pages used by these cells may need to be updated - ** (internal intkey nodes never contain pointers to overflow pages). - ** - ** 5) If the sibling pages are not leaves, then the pointer-map - ** entries for the right-child pages of each sibling may need - ** to be updated. - ** - ** Cases 1 and 2 are dealt with above by other code. The next - ** block deals with cases 3 and 4 and the one after that, case 5. Since - ** setting a pointer map entry is a relatively expensive operation, this - ** code only sets pointer map entries for child or overflow pages that have - ** actually moved between pages. */ - MemPage *pNew = apNew[0]; - MemPage *pOld = apCopy[0]; - int nOverflow = pOld->nOverflow; - int iNextOld = pOld->nCell + nOverflow; - int iOverflow = (nOverflow ? pOld->aiOvfl[0] : -1); - j = 0; /* Current 'old' sibling page */ - k = 0; /* Current 'new' sibling page */ - for(i=0; inCell + pOld->nOverflow; - if( pOld->nOverflow ){ - nOverflow = pOld->nOverflow; - iOverflow = i + !leafData + pOld->aiOvfl[0]; - } - isDivider = !leafData; - } - - assert(nOverflow>0 || iOverflowaiOvfl[0]==pOld->aiOvfl[1]-1); - assert(nOverflow<3 || pOld->aiOvfl[1]==pOld->aiOvfl[2]-1); - if( i==iOverflow ){ - isDivider = 1; - if( (--nOverflow)>0 ){ - iOverflow++; - } - } - - if( i==cntNew[k] ){ - /* Cell i is the cell immediately following the last cell on new - ** sibling page k. If the siblings are not leaf pages of an - ** intkey b-tree, then cell i is a divider cell. */ - pNew = apNew[++k]; - if( !leafData ) continue; - } - assert( jpgno!=pNew->pgno ){ - if( !leafCorrection ){ - ptrmapPut(pBt, get4byte(apCell[i]), PTRMAP_BTREE, pNew->pgno, &rc); - } - if( szCell[i]>pNew->minLocal ){ - ptrmapPutOvflPtr(pNew, apCell[i], &rc); - } - } + }else if( ISAUTOVACUUM && !leafCorrection ){ + /* Fix the pointer map entries associated with the right-child of each + ** sibling page. All other pointer map entries have already been taken + ** care of. */ + for(i=0; iaData[8]); + ptrmapPut(pBt, key, PTRMAP_BTREE, apNew[i]->pgno, &rc); } + } - if( !leafCorrection ){ - for(i=0; iaData[8]); - ptrmapPut(pBt, key, PTRMAP_BTREE, apNew[i]->pgno, &rc); - } - } + assert( pParent->isInit ); + TRACE(("BALANCE: finished: old=%d new=%d cells=%d\n", + nOld, nNew, nCell)); + /* Free any old pages that were not reused as new pages. + */ + for(i=nNew; iisInit ){ /* The ptrmapCheckPages() contains assert() statements that verify that ** all pointer map pages are set correctly. This is helpful while ** debugging. This is usually disabled because a corrupt database may ** cause an assert() statement to fail. */ ptrmapCheckPages(apNew, nNew); ptrmapCheckPages(&pParent, 1); -#endif } +#endif - assert( pParent->isInit ); - TRACE(("BALANCE: finished: old=%d new=%d cells=%d\n", - nOld, nNew, nCell)); - /* ** Cleanup before returning. */ @@ -57639,7 +60058,7 @@ rc = sqlite3PagerWrite(pParent->pDbPage); if( rc==SQLITE_OK ){ #ifndef SQLITE_OMIT_QUICKBALANCE - if( pPage->hasData + if( pPage->intKeyLeaf && pPage->nOverflow==1 && pPage->aiOvfl[0]==pPage->nCell && pParent->pgno!=1 @@ -57648,7 +60067,7 @@ /* Call balance_quick() to create a new sibling of pPage on which ** to store the overflow cell. balance_quick() inserts a new cell ** into pParent, which may cause pParent overflow. If this - ** happens, the next interation of the do-loop will balance pParent + ** happens, the next iteration of the do-loop will balance pParent ** use either balance_nonroot() or balance_deeper(). Until this ** happens, the overflow cell is stored in the aBalanceQuickSpace[] ** buffer. @@ -57725,7 +60144,7 @@ ** MovetoUnpacked() to seek cursor pCur to (pKey, nKey) has already ** been performed. seekResult is the search result returned (a negative ** number if pCur points at an entry that is smaller than (pKey, nKey), or -** a positive value if pCur points at an etry that is larger than +** a positive value if pCur points at an entry that is larger than ** (pKey, nKey)). ** ** If the seekResult parameter is non-zero, then the caller guarantees that @@ -57758,7 +60177,8 @@ } assert( cursorHoldsMutex(pCur) ); - assert( pCur->wrFlag && pBt->inTransaction==TRANS_WRITE + assert( (pCur->curFlags & BTCF_WriteFlag)!=0 + && pBt->inTransaction==TRANS_WRITE && (pBt->btsFlags & BTS_READ_ONLY)==0 ); assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) ); @@ -57791,7 +60211,8 @@ /* If the cursor is currently on the last row and we are appending a ** new row onto the end, set the "loc" to avoid an unnecessary btreeMoveto() ** call */ - if( pCur->validNKey && nKey>0 && pCur->info.nKey==nKey-1 ){ + if( (pCur->curFlags&BTCF_ValidNKey)!=0 && nKey>0 + && pCur->info.nKey==nKey-1 ){ loc = -1; } } @@ -57810,9 +60231,8 @@ pCur->pgnoRoot, nKey, nData, pPage->pgno, loc==0 ? "overwrite" : "new entry")); assert( pPage->isInit ); - allocateTempSpace(pBt); newCell = pBt->pTmpSpace; - if( newCell==0 ) return SQLITE_NOMEM; + assert( newCell!=0 ); rc = fillInCell(pPage, newCell, pKey, nKey, pData, nData, nZero, &szNew); if( rc ) goto end_insert; assert( szNew==cellSizePtr(pPage, newCell) ); @@ -57829,8 +60249,7 @@ if( !pPage->leaf ){ memcpy(newCell, oldCell, 4); } - szOld = cellSizePtr(pPage, oldCell); - rc = clearCell(pPage, oldCell); + rc = clearCell(pPage, oldCell, &szOld); dropCell(pPage, idx, szOld, &rc); if( rc ) goto end_insert; }else if( loc<0 && pPage->nCell>0 ){ @@ -57844,7 +60263,7 @@ /* If no error has occurred and pPage has an overflow cell, call balance() ** to redistribute the cells within the tree. Since balance() may move - ** the cursor, zero the BtCursor.info.nSize and BtCursor.validNKey + ** the cursor, zero the BtCursor.info.nSize and BTCF_ValidNKey ** variables. ** ** Previous versions of SQLite called moveToRoot() to move the cursor @@ -57864,7 +60283,7 @@ */ pCur->info.nSize = 0; if( rc==SQLITE_OK && pPage->nOverflow ){ - pCur->validNKey = 0; + pCur->curFlags &= ~(BTCF_ValidNKey); rc = balance(pCur); /* Must make sure nOverflow is reset to zero even if the balance() @@ -57882,7 +60301,7 @@ /* ** Delete the entry that the cursor is pointing to. The cursor -** is left pointing at a arbitrary location. +** is left pointing at an arbitrary location. */ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur){ Btree *p = pCur->pBtree; @@ -57892,11 +60311,12 @@ unsigned char *pCell; /* Pointer to cell to delete */ int iCellIdx; /* Index of cell to delete */ int iCellDepth; /* Depth of node containing pCell */ + u16 szCell; /* Size of the cell being deleted */ assert( cursorHoldsMutex(pCur) ); assert( pBt->inTransaction==TRANS_WRITE ); assert( (pBt->btsFlags & BTS_READ_ONLY)==0 ); - assert( pCur->wrFlag ); + assert( pCur->curFlags & BTCF_WriteFlag ); assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) ); assert( !hasReadConflicts(p, pCur->pgnoRoot) ); @@ -57940,8 +60360,8 @@ rc = sqlite3PagerWrite(pPage->pDbPage); if( rc ) return rc; - rc = clearCell(pPage, pCell); - dropCell(pPage, iCellIdx, cellSizePtr(pPage, pCell), &rc); + rc = clearCell(pPage, pCell, &szCell); + dropCell(pPage, iCellIdx, szCell, &rc); if( rc ) return rc; /* If the cell deleted was not located on a leaf page, then the cursor @@ -57958,10 +60378,8 @@ pCell = findCell(pLeaf, pLeaf->nCell-1); nCell = cellSizePtr(pLeaf, pCell); assert( MX_CELL_SIZE(pBt) >= nCell ); - - allocateTempSpace(pBt); pTmp = pBt->pTmpSpace; - + assert( pTmp!=0 ); rc = sqlite3PagerWrite(pLeaf->pDbPage); insertCell(pPage, iCellIdx, pCell-4, nCell+4, pTmp, n, &rc); dropCell(pLeaf, pLeaf->nCell-1, nCell, &rc); @@ -58173,6 +60591,7 @@ unsigned char *pCell; int i; int hdr; + u16 szCell; assert( sqlite3_mutex_held(pBt->mutex) ); if( pgno>btreePagecount(pBt) ){ @@ -58188,7 +60607,7 @@ rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange); if( rc ) goto cleardatabasepage_out; } - rc = clearCell(pPage, pCell); + rc = clearCell(pPage, pCell, &szCell); if( rc ) goto cleardatabasepage_out; } if( !pPage->leaf ){ @@ -58242,6 +60661,15 @@ } /* +** Delete all information from the single table that pCur is open on. +** +** This routine only work for pCur on an ephemeral table. +*/ +SQLITE_PRIVATE int sqlite3BtreeClearTableOfCursor(BtCursor *pCur){ + return sqlite3BtreeClearTable(pCur->pBtree, pCur->pgnoRoot, 0); +} + +/* ** Erase all information in a table and add the root of the table to ** the freelist. Except, the root of the principle table (the one on ** page 1) is never added to the freelist. @@ -58385,6 +60813,13 @@ ** The schema layer numbers meta values differently. At the schema ** layer (and the SetCookie and ReadCookie opcodes) the number of ** free pages is not visible. So Cookie[0] is the same as Meta[1]. +** +** This routine treats Meta[BTREE_DATA_VERSION] as a special case. Instead +** of reading the value out of the header, it instead loads the "DataVersion" +** from the pager. The BTREE_DATA_VERSION value is not actually stored in the +** database file. It is a number computed by the pager. But its access +** pattern is the same as header meta values, and so it is convenient to +** read it from this routine. */ SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *p, int idx, u32 *pMeta){ BtShared *pBt = p->pBt; @@ -58395,7 +60830,11 @@ assert( pBt->pPage1 ); assert( idx>=0 && idx<=15 ); - *pMeta = get4byte(&pBt->pPage1->aData[36 + idx*4]); + if( idx==BTREE_DATA_VERSION ){ + *pMeta = sqlite3PagerDataVersion(pBt->pPager) + p->iDataVersion; + }else{ + *pMeta = get4byte(&pBt->pPage1->aData[36 + idx*4]); + } /* If auto-vacuum is disabled in this build and this is an auto-vacuum ** database, mark the database as read-only. */ @@ -58486,7 +60925,7 @@ if( pCur->iPage==0 ){ /* All pages of the b-tree have been visited. Return successfully. */ *pnEntry = nEntry; - return SQLITE_OK; + return moveToRoot(pCur); } moveToParent(pCur); }while ( pCur->aiIdx[pCur->iPage]>=pCur->apPage[pCur->iPage]->nCell ); @@ -58525,20 +60964,21 @@ */ static void checkAppendMsg( IntegrityCk *pCheck, - char *zMsg1, const char *zFormat, ... ){ va_list ap; + char zBuf[200]; if( !pCheck->mxErr ) return; pCheck->mxErr--; pCheck->nErr++; va_start(ap, zFormat); if( pCheck->errMsg.nChar ){ sqlite3StrAccumAppend(&pCheck->errMsg, "\n", 1); } - if( zMsg1 ){ - sqlite3StrAccumAppendAll(&pCheck->errMsg, zMsg1); + if( pCheck->zPfx ){ + sqlite3_snprintf(sizeof(zBuf), zBuf, pCheck->zPfx, pCheck->v1, pCheck->v2); + sqlite3StrAccumAppendAll(&pCheck->errMsg, zBuf); } sqlite3VXPrintf(&pCheck->errMsg, 1, zFormat, ap); va_end(ap); @@ -58571,19 +61011,19 @@ /* ** Add 1 to the reference count for page iPage. If this is the second ** reference to the page, add an error message to pCheck->zErrMsg. -** Return 1 if there are 2 ore more references to the page and 0 if +** Return 1 if there are 2 or more references to the page and 0 if ** if this is the first reference to the page. ** ** Also check that the page number is in bounds. */ -static int checkRef(IntegrityCk *pCheck, Pgno iPage, char *zContext){ +static int checkRef(IntegrityCk *pCheck, Pgno iPage){ if( iPage==0 ) return 1; if( iPage>pCheck->nPage ){ - checkAppendMsg(pCheck, zContext, "invalid page number %d", iPage); + checkAppendMsg(pCheck, "invalid page number %d", iPage); return 1; } if( getPageReferenced(pCheck, iPage) ){ - checkAppendMsg(pCheck, zContext, "2nd reference to page %d", iPage); + checkAppendMsg(pCheck, "2nd reference to page %d", iPage); return 1; } setPageReferenced(pCheck, iPage); @@ -58600,8 +61040,7 @@ IntegrityCk *pCheck, /* Integrity check context */ Pgno iChild, /* Child page number */ u8 eType, /* Expected pointer map type */ - Pgno iParent, /* Expected pointer map parent page number */ - char *zContext /* Context description (used for error msg) */ + Pgno iParent /* Expected pointer map parent page number */ ){ int rc; u8 ePtrmapType; @@ -58610,12 +61049,12 @@ rc = ptrmapGet(pCheck->pBt, iChild, &ePtrmapType, &iPtrmapParent); if( rc!=SQLITE_OK ){ if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ) pCheck->mallocFailed = 1; - checkAppendMsg(pCheck, zContext, "Failed to read ptrmap key=%d", iChild); + checkAppendMsg(pCheck, "Failed to read ptrmap key=%d", iChild); return; } if( ePtrmapType!=eType || iPtrmapParent!=iParent ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "Bad ptr map entry key=%d expected=(%d,%d) got=(%d,%d)", iChild, eType, iParent, ePtrmapType, iPtrmapParent); } @@ -58630,8 +61069,7 @@ IntegrityCk *pCheck, /* Integrity checking context */ int isFreeList, /* True for a freelist. False for overflow page list */ int iPage, /* Page number for first page in the list */ - int N, /* Expected number of pages in the list */ - char *zContext /* Context for error messages */ + int N /* Expected number of pages in the list */ ){ int i; int expected = N; @@ -58640,37 +61078,37 @@ DbPage *pOvflPage; unsigned char *pOvflData; if( iPage<1 ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "%d of %d pages missing from overflow list starting at %d", N+1, expected, iFirst); break; } - if( checkRef(pCheck, iPage, zContext) ) break; + if( checkRef(pCheck, iPage) ) break; if( sqlite3PagerGet(pCheck->pPager, (Pgno)iPage, &pOvflPage) ){ - checkAppendMsg(pCheck, zContext, "failed to get page %d", iPage); + checkAppendMsg(pCheck, "failed to get page %d", iPage); break; } pOvflData = (unsigned char *)sqlite3PagerGetData(pOvflPage); if( isFreeList ){ int n = get4byte(&pOvflData[4]); #ifndef SQLITE_OMIT_AUTOVACUUM if( pCheck->pBt->autoVacuum ){ - checkPtrmap(pCheck, iPage, PTRMAP_FREEPAGE, 0, zContext); + checkPtrmap(pCheck, iPage, PTRMAP_FREEPAGE, 0); } #endif if( n>(int)pCheck->pBt->usableSize/4-2 ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "freelist leaf count too big on page %d", iPage); N--; }else{ for(i=0; ipBt->autoVacuum ){ - checkPtrmap(pCheck, iFreePage, PTRMAP_FREEPAGE, 0, zContext); + checkPtrmap(pCheck, iFreePage, PTRMAP_FREEPAGE, 0); } #endif - checkRef(pCheck, iFreePage, zContext); + checkRef(pCheck, iFreePage); } N -= n; } @@ -58683,7 +61121,7 @@ */ if( pCheck->pBt->autoVacuum && N>0 ){ i = get4byte(pOvflData); - checkPtrmap(pCheck, i, PTRMAP_OVERFLOW2, iPage, zContext); + checkPtrmap(pCheck, i, PTRMAP_OVERFLOW2, iPage); } } #endif @@ -58715,7 +61153,6 @@ static int checkTreePage( IntegrityCk *pCheck, /* Context for the sanity check */ int iPage, /* Page number of the page to check */ - char *zParentContext, /* Parent context */ i64 *pnParentMinKey, i64 *pnParentMaxKey ){ @@ -58726,34 +61163,38 @@ u8 *data; BtShared *pBt; int usableSize; - char zContext[100]; char *hit = 0; i64 nMinKey = 0; i64 nMaxKey = 0; + const char *saved_zPfx = pCheck->zPfx; + int saved_v1 = pCheck->v1; + int saved_v2 = pCheck->v2; - sqlite3_snprintf(sizeof(zContext), zContext, "Page %d: ", iPage); - /* Check that the page exists */ pBt = pCheck->pBt; usableSize = pBt->usableSize; if( iPage==0 ) return 0; - if( checkRef(pCheck, iPage, zParentContext) ) return 0; + if( checkRef(pCheck, iPage) ) return 0; + pCheck->zPfx = "Page %d: "; + pCheck->v1 = iPage; if( (rc = btreeGetPage(pBt, (Pgno)iPage, &pPage, 0))!=0 ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "unable to get the page. error code=%d", rc); - return 0; + depth = -1; + goto end_of_check; } /* Clear MemPage.isInit to make sure the corruption detection code in ** btreeInitPage() is executed. */ pPage->isInit = 0; if( (rc = btreeInitPage(pPage))!=0 ){ assert( rc==SQLITE_CORRUPT ); /* The only possible error from InitPage */ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "btreeInitPage() returns error code %d", rc); releasePage(pPage); - return 0; + depth = -1; + goto end_of_check; } /* Check out all the cells. @@ -58766,34 +61207,34 @@ /* Check payload overflow pages */ - sqlite3_snprintf(sizeof(zContext), zContext, - "On tree page %d cell %d: ", iPage, i); + pCheck->zPfx = "On tree page %d cell %d: "; + pCheck->v1 = iPage; + pCheck->v2 = i; pCell = findCell(pPage,i); btreeParseCellPtr(pPage, pCell, &info); - sz = info.nData; - if( !pPage->intKey ) sz += (int)info.nKey; + sz = info.nPayload; /* For intKey pages, check that the keys are in order. */ - else if( i==0 ) nMinKey = nMaxKey = info.nKey; - else{ - if( info.nKey <= nMaxKey ){ - checkAppendMsg(pCheck, zContext, - "Rowid %lld out of order (previous was %lld)", info.nKey, nMaxKey); + if( pPage->intKey ){ + if( i==0 ){ + nMinKey = nMaxKey = info.nKey; + }else if( info.nKey <= nMaxKey ){ + checkAppendMsg(pCheck, + "Rowid %lld out of order (previous was %lld)", info.nKey, nMaxKey); } nMaxKey = info.nKey; } - assert( sz==info.nPayload ); if( (sz>info.nLocal) && (&pCell[info.iOverflow]<=&pPage->aData[pBt->usableSize]) ){ int nPage = (sz - info.nLocal + usableSize - 5)/(usableSize - 4); Pgno pgnoOvfl = get4byte(&pCell[info.iOverflow]); #ifndef SQLITE_OMIT_AUTOVACUUM if( pBt->autoVacuum ){ - checkPtrmap(pCheck, pgnoOvfl, PTRMAP_OVERFLOW1, iPage, zContext); + checkPtrmap(pCheck, pgnoOvfl, PTRMAP_OVERFLOW1, iPage); } #endif - checkList(pCheck, 0, pgnoOvfl, nPage, zContext); + checkList(pCheck, 0, pgnoOvfl, nPage); } /* Check sanity of left child page. @@ -58802,50 +61243,52 @@ pgno = get4byte(pCell); #ifndef SQLITE_OMIT_AUTOVACUUM if( pBt->autoVacuum ){ - checkPtrmap(pCheck, pgno, PTRMAP_BTREE, iPage, zContext); + checkPtrmap(pCheck, pgno, PTRMAP_BTREE, iPage); } #endif - d2 = checkTreePage(pCheck, pgno, zContext, &nMinKey, i==0 ? NULL : &nMaxKey); + d2 = checkTreePage(pCheck, pgno, &nMinKey, i==0?NULL:&nMaxKey); if( i>0 && d2!=depth ){ - checkAppendMsg(pCheck, zContext, "Child page depth differs"); + checkAppendMsg(pCheck, "Child page depth differs"); } depth = d2; } } if( !pPage->leaf ){ pgno = get4byte(&pPage->aData[pPage->hdrOffset+8]); - sqlite3_snprintf(sizeof(zContext), zContext, - "On page %d at right child: ", iPage); + pCheck->zPfx = "On page %d at right child: "; + pCheck->v1 = iPage; #ifndef SQLITE_OMIT_AUTOVACUUM if( pBt->autoVacuum ){ - checkPtrmap(pCheck, pgno, PTRMAP_BTREE, iPage, zContext); + checkPtrmap(pCheck, pgno, PTRMAP_BTREE, iPage); } #endif - checkTreePage(pCheck, pgno, zContext, NULL, !pPage->nCell ? NULL : &nMaxKey); + checkTreePage(pCheck, pgno, NULL, !pPage->nCell?NULL:&nMaxKey); } /* For intKey leaf pages, check that the min/max keys are in order ** with any left/parent/right pages. */ + pCheck->zPfx = "Page %d: "; + pCheck->v1 = iPage; if( pPage->leaf && pPage->intKey ){ /* if we are a left child page */ if( pnParentMinKey ){ /* if we are the left most child page */ if( !pnParentMaxKey ){ if( nMaxKey > *pnParentMinKey ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "Rowid %lld out of order (max larger than parent min of %lld)", nMaxKey, *pnParentMinKey); } }else{ if( nMinKey <= *pnParentMinKey ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "Rowid %lld out of order (min less than parent min of %lld)", nMinKey, *pnParentMinKey); } if( nMaxKey > *pnParentMaxKey ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "Rowid %lld out of order (max larger than parent max of %lld)", nMaxKey, *pnParentMaxKey); } @@ -58854,7 +61297,7 @@ /* else if we're a right child page */ } else if( pnParentMaxKey ){ if( nMinKey <= *pnParentMaxKey ){ - checkAppendMsg(pCheck, zContext, + checkAppendMsg(pCheck, "Rowid %lld out of order (min less than parent max of %lld)", nMinKey, *pnParentMaxKey); } @@ -58866,15 +61309,22 @@ data = pPage->aData; hdr = pPage->hdrOffset; hit = sqlite3PageMalloc( pBt->pageSize ); + pCheck->zPfx = 0; if( hit==0 ){ pCheck->mallocFailed = 1; }else{ int contentOffset = get2byteNotZero(&data[hdr+5]); assert( contentOffset<=usableSize ); /* Enforced by btreeInitPage() */ memset(hit+contentOffset, 0, usableSize-contentOffset); memset(hit, 1, contentOffset); + /* EVIDENCE-OF: R-37002-32774 The two-byte integer at offset 3 gives the + ** number of cells on the page. */ nCell = get2byte(&data[hdr+3]); + /* EVIDENCE-OF: R-23882-45353 The cell pointer array of a b-tree page + ** immediately follows the b-tree page header. */ cellStart = hdr + 12 - 4*pPage->leaf; + /* EVIDENCE-OF: R-02776-14802 The cell pointer array consists of K 2-byte + ** integer offsets to the cell contents. */ for(i=0; i=usableSize ){ - checkAppendMsg(pCheck, 0, + pCheck->zPfx = 0; + checkAppendMsg(pCheck, "Corruption detected in cell %d on page %d",i,iPage); }else{ for(j=pc+size-1; j>=pc; j--) hit[j]++; } } + /* EVIDENCE-OF: R-20690-50594 The second field of the b-tree page header + ** is the offset of the first freeblock, or zero if there are no + ** freeblocks on the page. */ i = get2byte(&data[hdr+1]); while( i>0 ){ int size, j; assert( i<=usableSize-4 ); /* Enforced by btreeInitPage() */ size = get2byte(&data[i+2]); assert( i+size<=usableSize ); /* Enforced by btreeInitPage() */ for(j=i+size-1; j>=i; j--) hit[j]++; + /* EVIDENCE-OF: R-58208-19414 The first 2 bytes of a freeblock are a + ** big-endian integer which is the offset in the b-tree page of the next + ** freeblock in the chain, or zero if the freeblock is the last on the + ** chain. */ j = get2byte(&data[i]); + /* EVIDENCE-OF: R-06866-39125 Freeblocks are always connected in order of + ** increasing offset. */ assert( j==0 || j>i+size ); /* Enforced by btreeInitPage() */ assert( j<=usableSize-4 ); /* Enforced by btreeInitPage() */ i = j; @@ -58905,19 +61365,29 @@ if( hit[i]==0 ){ cnt++; }else if( hit[i]>1 ){ - checkAppendMsg(pCheck, 0, + checkAppendMsg(pCheck, "Multiple uses for byte %d of page %d", i, iPage); break; } } + /* EVIDENCE-OF: R-43263-13491 The total number of bytes in all fragments + ** is stored in the fifth field of the b-tree page header. + ** EVIDENCE-OF: R-07161-27322 The one-byte integer at offset 7 gives the + ** number of fragmented free bytes within the cell content area. + */ if( cnt!=data[hdr+7] ){ - checkAppendMsg(pCheck, 0, + checkAppendMsg(pCheck, "Fragmentation of %d bytes reported as %d on page %d", cnt, data[hdr+7], iPage); } } sqlite3PageFree(hit); releasePage(pPage); + +end_of_check: + pCheck->zPfx = saved_zPfx; + pCheck->v1 = saved_v1; + pCheck->v2 = saved_v2; return depth+1; } #endif /* SQLITE_OMIT_INTEGRITY_CHECK */ @@ -58958,6 +61428,9 @@ sCheck.mxErr = mxErr; sCheck.nErr = 0; sCheck.mallocFailed = 0; + sCheck.zPfx = 0; + sCheck.v1 = 0; + sCheck.v2 = 0; *pnErr = 0; if( sCheck.nPage==0 ){ sqlite3BtreeLeave(p); @@ -58977,39 +61450,43 @@ /* Check the integrity of the freelist */ + sCheck.zPfx = "Main freelist: "; checkList(&sCheck, 1, get4byte(&pBt->pPage1->aData[32]), - get4byte(&pBt->pPage1->aData[36]), "Main freelist: "); + get4byte(&pBt->pPage1->aData[36])); + sCheck.zPfx = 0; /* Check all the tables. */ for(i=0; (int)iautoVacuum && aRoot[i]>1 ){ - checkPtrmap(&sCheck, aRoot[i], PTRMAP_ROOTPAGE, 0, 0); + checkPtrmap(&sCheck, aRoot[i], PTRMAP_ROOTPAGE, 0); } #endif - checkTreePage(&sCheck, aRoot[i], "List of tree roots: ", NULL, NULL); + sCheck.zPfx = "List of tree roots: "; + checkTreePage(&sCheck, aRoot[i], NULL, NULL); + sCheck.zPfx = 0; } /* Make sure every page in the file is referenced */ for(i=1; i<=sCheck.nPage && sCheck.mxErr; i++){ #ifdef SQLITE_OMIT_AUTOVACUUM if( getPageReferenced(&sCheck, i)==0 ){ - checkAppendMsg(&sCheck, 0, "Page %d is never used", i); + checkAppendMsg(&sCheck, "Page %d is never used", i); } #else /* If the database supports auto-vacuum, make sure no tables contain ** references to pointer-map pages. */ if( getPageReferenced(&sCheck, i)==0 && (PTRMAP_PAGENO(pBt, i)!=i || !pBt->autoVacuum) ){ - checkAppendMsg(&sCheck, 0, "Page %d is never used", i); + checkAppendMsg(&sCheck, "Page %d is never used", i); } if( getPageReferenced(&sCheck, i)!=0 && (PTRMAP_PAGENO(pBt, i)==i && pBt->autoVacuum) ){ - checkAppendMsg(&sCheck, 0, "Pointer map page %d is referenced", i); + checkAppendMsg(&sCheck, "Pointer map page %d is referenced", i); } #endif } @@ -59019,7 +61496,7 @@ ** of the integrity check. */ if( NEVER(nRef != sqlite3PagerRefcount(pBt->pPager)) ){ - checkAppendMsg(&sCheck, 0, + checkAppendMsg(&sCheck, "Outstanding page count goes from %d to %d during this analysis", nRef, sqlite3PagerRefcount(pBt->pPager) ); @@ -59200,7 +61677,7 @@ int rc; assert( cursorHoldsMutex(pCsr) ); assert( sqlite3_mutex_held(pCsr->pBtree->db->mutex) ); - assert( pCsr->isIncrblobHandle ); + assert( pCsr->curFlags & BTCF_Incrblob ); rc = restoreCursorPosition(pCsr); if( rc!=SQLITE_OK ){ @@ -59215,7 +61692,7 @@ ** required in case any of them are holding references to an xFetch ** version of the b-tree page modified by the accessPayload call below. ** - ** Note that pCsr must be open on a BTREE_INTKEY table and saveCursorPosition() + ** Note that pCsr must be open on a INTKEY table and saveCursorPosition() ** and hence saveAllCursors() cannot fail on a BTREE_INTKEY table, hence ** saveAllCursors can only return SQLITE_OK. */ @@ -59229,7 +61706,7 @@ ** (d) there are no conflicting read-locks, and ** (e) the cursor points at a valid row of an intKey table. */ - if( !pCsr->wrFlag ){ + if( (pCsr->curFlags & BTCF_WriteFlag)==0 ){ return SQLITE_READONLY; } assert( (pCsr->pBt->btsFlags & BTS_READ_ONLY)==0 @@ -59242,20 +61719,10 @@ } /* -** Set a flag on this cursor to cache the locations of pages from the -** overflow list for the current row. This is used by cursors opened -** for incremental blob IO only. -** -** This function sets a flag only. The actual page location cache -** (stored in BtCursor.aOverflow[]) is allocated and used by function -** accessPayload() (the worker function for sqlite3BtreeData() and -** sqlite3BtreePutData()). +** Mark this cursor as an incremental blob cursor. */ -SQLITE_PRIVATE void sqlite3BtreeCacheOverflow(BtCursor *pCur){ - assert( cursorHoldsMutex(pCur) ); - assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); - invalidateOverflowCache(pCur); - pCur->isIncrblobHandle = 1; +SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *pCur){ + pCur->curFlags |= BTCF_Incrblob; } #endif @@ -59304,6 +61771,18 @@ pCsr->hints = mask; } +/* +** Return true if the given Btree is read-only. +*/ +SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *p){ + return (p->pBt->btsFlags & BTS_READ_ONLY)!=0; +} + +/* +** Return the size of the header added to each page by this module. +*/ +SQLITE_PRIVATE int sqlite3HeaderSizeBtree(void){ return ROUND8(sizeof(MemPage)); } + /************** End of btree.c ***********************************************/ /************** Begin file backup.c ******************************************/ /* @@ -59393,12 +61872,12 @@ int rc = 0; pParse = sqlite3StackAllocZero(pErrorDb, sizeof(*pParse)); if( pParse==0 ){ - sqlite3Error(pErrorDb, SQLITE_NOMEM, "out of memory"); + sqlite3ErrorWithMsg(pErrorDb, SQLITE_NOMEM, "out of memory"); rc = SQLITE_NOMEM; }else{ pParse->db = pDb; if( sqlite3OpenTempDatabase(pParse) ){ - sqlite3Error(pErrorDb, pParse->rc, "%s", pParse->zErrMsg); + sqlite3ErrorWithMsg(pErrorDb, pParse->rc, "%s", pParse->zErrMsg); rc = SQLITE_ERROR; } sqlite3DbFree(pErrorDb, pParse->zErrMsg); @@ -59411,7 +61890,7 @@ } if( i<0 ){ - sqlite3Error(pErrorDb, SQLITE_ERROR, "unknown database %s", zDb); + sqlite3ErrorWithMsg(pErrorDb, SQLITE_ERROR, "unknown database %s", zDb); return 0; } @@ -59429,6 +61908,20 @@ } /* +** Check that there is no open read-transaction on the b-tree passed as the +** second argument. If there is not, return SQLITE_OK. Otherwise, if there +** is an open read-transaction, return SQLITE_ERROR and leave an error +** message in database handle db. +*/ +static int checkReadTransaction(sqlite3 *db, Btree *p){ + if( sqlite3BtreeIsInReadTrans(p) ){ + sqlite3ErrorWithMsg(db, SQLITE_ERROR, "destination database is in use"); + return SQLITE_ERROR; + } + return SQLITE_OK; +} + +/* ** Create an sqlite3_backup process to copy the contents of zSrcDb from ** connection handle pSrcDb to zDestDb in pDestDb. If successful, return ** a pointer to the new sqlite3_backup object. @@ -59444,6 +61937,13 @@ ){ sqlite3_backup *p; /* Value to return */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(pSrcDb)||!sqlite3SafetyCheckOk(pDestDb) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + /* Lock the source database handle. The destination database ** handle is not locked in this routine, but it is locked in ** sqlite3_backup_step(). The user is required to ensure that no @@ -59456,7 +61956,7 @@ sqlite3_mutex_enter(pDestDb->mutex); if( pSrcDb==pDestDb ){ - sqlite3Error( + sqlite3ErrorWithMsg( pDestDb, SQLITE_ERROR, "source and destination must be distinct" ); p = 0; @@ -59467,7 +61967,7 @@ ** sqlite3_backup_finish(). */ p = (sqlite3_backup *)sqlite3MallocZero(sizeof(sqlite3_backup)); if( !p ){ - sqlite3Error(pDestDb, SQLITE_NOMEM, 0); + sqlite3Error(pDestDb, SQLITE_NOMEM); } } @@ -59480,12 +61980,15 @@ p->iNext = 1; p->isAttached = 0; - if( 0==p->pSrc || 0==p->pDest || setDestPgsz(p)==SQLITE_NOMEM ){ + if( 0==p->pSrc || 0==p->pDest + || setDestPgsz(p)==SQLITE_NOMEM + || checkReadTransaction(pDestDb, p->pDest)!=SQLITE_OK + ){ /* One (or both) of the named databases did not exist or an OOM - ** error was hit. The error has already been written into the - ** pDestDb handle. All that is left to do here is free the - ** sqlite3_backup structure. - */ + ** error was hit. Or there is a transaction open on the destination + ** database. The error has already been written into the pDestDb + ** handle. All that is left to do here is free the sqlite3_backup + ** structure. */ sqlite3_free(p); p = 0; } @@ -59640,6 +62143,9 @@ int pgszSrc = 0; /* Source page size */ int pgszDest = 0; /* Destination page size */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( p==0 ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(p->pSrcDb->mutex); sqlite3BtreeEnter(p->pSrc); if( p->pDestDb ){ @@ -59903,12 +62409,12 @@ } /* If a transaction is still open on the Btree, roll it back. */ - sqlite3BtreeRollback(p->pDest, SQLITE_OK); + sqlite3BtreeRollback(p->pDest, SQLITE_OK, 0); /* Set the error code of the destination database handle. */ rc = (p->rc==SQLITE_DONE) ? SQLITE_OK : p->rc; if( p->pDestDb ){ - sqlite3Error(p->pDestDb, rc, 0); + sqlite3Error(p->pDestDb, rc); /* Exit the mutexes and free the backup context structure. */ sqlite3LeaveMutexAndCloseZombie(p->pDestDb); @@ -59929,6 +62435,12 @@ ** call to sqlite3_backup_step(). */ SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( p==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif return p->nRemaining; } @@ -59937,6 +62449,12 @@ ** recent call to sqlite3_backup_step(). */ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( p==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif return p->nPagecount; } @@ -60081,29 +62599,40 @@ ** this: assert( sqlite3VdbeCheckMemInvariants(pMem) ); */ SQLITE_PRIVATE int sqlite3VdbeCheckMemInvariants(Mem *p){ - /* The MEM_Dyn bit is set if and only if Mem.xDel is a non-NULL destructor - ** function for Mem.z + /* If MEM_Dyn is set then Mem.xDel!=0. + ** Mem.xDel is might not be initialized if MEM_Dyn is clear. */ assert( (p->flags & MEM_Dyn)==0 || p->xDel!=0 ); - assert( (p->flags & MEM_Dyn)!=0 || p->xDel==0 ); + /* MEM_Dyn may only be set if Mem.szMalloc==0. In this way we + ** ensure that if Mem.szMalloc>0 then it is safe to do + ** Mem.z = Mem.zMalloc without having to check Mem.flags&MEM_Dyn. + ** That saves a few cycles in inner loops. */ + assert( (p->flags & MEM_Dyn)==0 || p->szMalloc==0 ); + + /* Cannot be both MEM_Int and MEM_Real at the same time */ + assert( (p->flags & (MEM_Int|MEM_Real))!=(MEM_Int|MEM_Real) ); + + /* The szMalloc field holds the correct memory allocation size */ + assert( p->szMalloc==0 + || p->szMalloc==sqlite3DbMallocSize(p->db,p->zMalloc) ); + /* If p holds a string or blob, the Mem.z must point to exactly ** one of the following: ** ** (1) Memory in Mem.zMalloc and managed by the Mem object ** (2) Memory to be freed using Mem.xDel - ** (3) An ephermal string or blob + ** (3) An ephemeral string or blob ** (4) A static string or blob */ - if( (p->flags & (MEM_Str|MEM_Blob)) && p->z!=0 ){ + if( (p->flags & (MEM_Str|MEM_Blob)) && p->n>0 ){ assert( - ((p->z==p->zMalloc)? 1 : 0) + + ((p->szMalloc>0 && p->z==p->zMalloc)? 1 : 0) + ((p->flags&MEM_Dyn)!=0 ? 1 : 0) + ((p->flags&MEM_Ephem)!=0 ? 1 : 0) + ((p->flags&MEM_Static)!=0 ? 1 : 0) == 1 ); } - return 1; } #endif @@ -60157,7 +62686,7 @@ ** blob if bPreserve is true. If bPreserve is false, any prior content ** in pMem->z is discarded. */ -SQLITE_PRIVATE int sqlite3VdbeMemGrow(Mem *pMem, int n, int bPreserve){ +SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemGrow(Mem *pMem, int n, int bPreserve){ assert( sqlite3VdbeCheckMemInvariants(pMem) ); assert( (pMem->flags&MEM_RowSet)==0 ); @@ -60166,24 +62695,28 @@ assert( bPreserve==0 || pMem->flags&(MEM_Blob|MEM_Str) ); testcase( bPreserve && pMem->z==0 ); - if( pMem->zMalloc==0 || sqlite3DbMallocSize(pMem->db, pMem->zMalloc)szMalloc==0 + || pMem->szMalloc==sqlite3DbMallocSize(pMem->db, pMem->zMalloc) ); + if( pMem->szMallocz==pMem->zMalloc ){ + if( bPreserve && pMem->szMalloc>0 && pMem->z==pMem->zMalloc ){ pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n); bPreserve = 0; }else{ - sqlite3DbFree(pMem->db, pMem->zMalloc); + if( pMem->szMalloc>0 ) sqlite3DbFree(pMem->db, pMem->zMalloc); pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n); } if( pMem->zMalloc==0 ){ - VdbeMemRelease(pMem); + sqlite3VdbeMemSetNull(pMem); pMem->z = 0; - pMem->flags = MEM_Null; + pMem->szMalloc = 0; return SQLITE_NOMEM; + }else{ + pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc); } } - if( pMem->z && bPreserve && pMem->z!=pMem->zMalloc ){ + if( bPreserve && pMem->z && pMem->z!=pMem->zMalloc ){ memcpy(pMem->zMalloc, pMem->z, pMem->n); } if( (pMem->flags&MEM_Dyn)!=0 ){ @@ -60193,16 +62726,38 @@ pMem->z = pMem->zMalloc; pMem->flags &= ~(MEM_Dyn|MEM_Ephem|MEM_Static); - pMem->xDel = 0; return SQLITE_OK; } /* -** Make the given Mem object MEM_Dyn. In other words, make it so -** that any TEXT or BLOB content is stored in memory obtained from -** malloc(). In this way, we know that the memory is safe to be -** overwritten or altered. +** Change the pMem->zMalloc allocation to be at least szNew bytes. +** If pMem->zMalloc already meets or exceeds the requested size, this +** routine is a no-op. ** +** Any prior string or blob content in the pMem object may be discarded. +** The pMem->xDel destructor is called, if it exists. Though MEM_Str +** and MEM_Blob values may be discarded, MEM_Int, MEM_Real, and MEM_Null +** values are preserved. +** +** Return SQLITE_OK on success or an error code (probably SQLITE_NOMEM) +** if unable to complete the resizing. +*/ +SQLITE_PRIVATE int sqlite3VdbeMemClearAndResize(Mem *pMem, int szNew){ + assert( szNew>0 ); + assert( (pMem->flags & MEM_Dyn)==0 || pMem->szMalloc==0 ); + if( pMem->szMallocflags & MEM_Dyn)==0 ); + pMem->z = pMem->zMalloc; + pMem->flags &= (MEM_Null|MEM_Int|MEM_Real); + return SQLITE_OK; +} + +/* +** Change pMem so that its MEM_Str or MEM_Blob value is stored in +** MEM.zMalloc, where it can be safely written. +** ** Return SQLITE_OK on success or SQLITE_NOMEM if malloc fails. */ SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem *pMem){ @@ -60211,7 +62766,7 @@ assert( (pMem->flags&MEM_RowSet)==0 ); ExpandBlob(pMem); f = pMem->flags; - if( (f&(MEM_Str|MEM_Blob)) && pMem->z!=pMem->zMalloc ){ + if( (f&(MEM_Str|MEM_Blob)) && (pMem->szMalloc==0 || pMem->z!=pMem->zMalloc) ){ if( sqlite3VdbeMemGrow(pMem, pMem->n + 2, 1) ){ return SQLITE_NOMEM; } @@ -60255,15 +62810,11 @@ } #endif - /* -** Make sure the given Mem is \u0000 terminated. +** It is already known that pMem contains an unterminated string. +** Add the zero terminator. */ -SQLITE_PRIVATE int sqlite3VdbeMemNulTerminate(Mem *pMem){ - assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - if( (pMem->flags & MEM_Term)!=0 || (pMem->flags & MEM_Str)==0 ){ - return SQLITE_OK; /* Nothing to do */ - } +static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){ if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){ return SQLITE_NOMEM; } @@ -60274,20 +62825,34 @@ } /* +** Make sure the given Mem is \u0000 terminated. +*/ +SQLITE_PRIVATE int sqlite3VdbeMemNulTerminate(Mem *pMem){ + assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); + testcase( (pMem->flags & (MEM_Term|MEM_Str))==(MEM_Term|MEM_Str) ); + testcase( (pMem->flags & (MEM_Term|MEM_Str))==0 ); + if( (pMem->flags & (MEM_Term|MEM_Str))!=MEM_Str ){ + return SQLITE_OK; /* Nothing to do */ + }else{ + return vdbeMemAddTerminator(pMem); + } +} + +/* ** Add MEM_Str to the set of representations for the given Mem. Numbers ** are converted using sqlite3_snprintf(). Converting a BLOB to a string ** is a no-op. ** -** Existing representations MEM_Int and MEM_Real are *not* invalidated. +** Existing representations MEM_Int and MEM_Real are invalidated if +** bForce is true but are retained if bForce is false. ** ** A MEM_Null value will never be passed to this function. This function is ** used for converting values to text for returning to the user (i.e. via ** sqlite3_value_text()), or for ensuring that values to be used as btree ** keys are strings. In the former case a NULL pointer is returned the -** user and the later is an internal programming error. +** user and the latter is an internal programming error. */ -SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem *pMem, int enc){ - int rc = SQLITE_OK; +SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem *pMem, u8 enc, u8 bForce){ int fg = pMem->flags; const int nByte = 32; @@ -60299,11 +62864,11 @@ assert( EIGHT_BYTE_ALIGNMENT(pMem) ); - if( sqlite3VdbeMemGrow(pMem, nByte, 0) ){ + if( sqlite3VdbeMemClearAndResize(pMem, nByte) ){ return SQLITE_NOMEM; } - /* For a Real or Integer, use sqlite3_mprintf() to produce the UTF-8 + /* For a Real or Integer, use sqlite3_snprintf() to produce the UTF-8 ** string representation of the value. Then, if the required encoding ** is UTF-16le or UTF-16be do a translation. ** @@ -60313,13 +62878,14 @@ sqlite3_snprintf(nByte, pMem->z, "%lld", pMem->u.i); }else{ assert( fg & MEM_Real ); - sqlite3_snprintf(nByte, pMem->z, "%!.15g", pMem->r); + sqlite3_snprintf(nByte, pMem->z, "%!.15g", pMem->u.r); } pMem->n = sqlite3Strlen30(pMem->z); pMem->enc = SQLITE_UTF8; pMem->flags |= MEM_Str|MEM_Term; + if( bForce ) pMem->flags &= ~(MEM_Int|MEM_Real); sqlite3VdbeChangeEncoding(pMem, enc); - return rc; + return SQLITE_OK; } /* @@ -60334,62 +62900,93 @@ int rc = SQLITE_OK; if( ALWAYS(pFunc && pFunc->xFinalize) ){ sqlite3_context ctx; + Mem t; assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef ); assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); memset(&ctx, 0, sizeof(ctx)); - ctx.s.flags = MEM_Null; - ctx.s.db = pMem->db; + memset(&t, 0, sizeof(t)); + t.flags = MEM_Null; + t.db = pMem->db; + ctx.pOut = &t; ctx.pMem = pMem; ctx.pFunc = pFunc; pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */ - assert( 0==(pMem->flags&MEM_Dyn) && !pMem->xDel ); - sqlite3DbFree(pMem->db, pMem->zMalloc); - memcpy(pMem, &ctx.s, sizeof(ctx.s)); + assert( (pMem->flags & MEM_Dyn)==0 ); + if( pMem->szMalloc>0 ) sqlite3DbFree(pMem->db, pMem->zMalloc); + memcpy(pMem, &t, sizeof(t)); rc = ctx.isError; } return rc; } /* -** If the memory cell contains a string value that must be freed by -** invoking an external callback, free it now. Calling this function -** does not free any Mem.zMalloc buffer. +** If the memory cell contains a value that must be freed by +** invoking the external callback in Mem.xDel, then this routine +** will free that value. It also sets Mem.flags to MEM_Null. +** +** This is a helper routine for sqlite3VdbeMemSetNull() and +** for sqlite3VdbeMemRelease(). Use those other routines as the +** entry point for releasing Mem resources. */ -SQLITE_PRIVATE void sqlite3VdbeMemReleaseExternal(Mem *p){ +static SQLITE_NOINLINE void vdbeMemClearExternAndSetNull(Mem *p){ assert( p->db==0 || sqlite3_mutex_held(p->db->mutex) ); + assert( VdbeMemDynamic(p) ); if( p->flags&MEM_Agg ){ sqlite3VdbeMemFinalize(p, p->u.pDef); assert( (p->flags & MEM_Agg)==0 ); - sqlite3VdbeMemRelease(p); - }else if( p->flags&MEM_Dyn ){ + testcase( p->flags & MEM_Dyn ); + } + if( p->flags&MEM_Dyn ){ assert( (p->flags&MEM_RowSet)==0 ); assert( p->xDel!=SQLITE_DYNAMIC && p->xDel!=0 ); p->xDel((void *)p->z); - p->xDel = 0; }else if( p->flags&MEM_RowSet ){ sqlite3RowSetClear(p->u.pRowSet); }else if( p->flags&MEM_Frame ){ - sqlite3VdbeMemSetNull(p); + VdbeFrame *pFrame = p->u.pFrame; + pFrame->pParent = pFrame->v->pDelFrame; + pFrame->v->pDelFrame = pFrame; } + p->flags = MEM_Null; } /* -** Release any memory held by the Mem. This may leave the Mem in an -** inconsistent state, for example with (Mem.z==0) and -** (Mem.flags==MEM_Str). +** Release memory held by the Mem p, both external memory cleared +** by p->xDel and memory in p->zMalloc. +** +** This is a helper routine invoked by sqlite3VdbeMemRelease() in +** the unusual case where there really is memory in p that needs +** to be freed. */ -SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p){ - assert( sqlite3VdbeCheckMemInvariants(p) ); - VdbeMemRelease(p); - if( p->zMalloc ){ +static SQLITE_NOINLINE void vdbeMemClear(Mem *p){ + if( VdbeMemDynamic(p) ){ + vdbeMemClearExternAndSetNull(p); + } + if( p->szMalloc ){ sqlite3DbFree(p->db, p->zMalloc); - p->zMalloc = 0; + p->szMalloc = 0; } p->z = 0; - assert( p->xDel==0 ); /* Zeroed by VdbeMemRelease() above */ } /* +** Release any memory resources held by the Mem. Both the memory that is +** free by Mem.xDel and the Mem.zMalloc allocation are freed. +** +** Use this routine prior to clean up prior to abandoning a Mem, or to +** reset a Mem back to its minimum memory utilization. +** +** Use sqlite3VdbeMemSetNull() to release just the Mem.xDel space +** prior to inserting new content into the Mem. +*/ +SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p){ + assert( sqlite3VdbeCheckMemInvariants(p) ); + if( VdbeMemDynamic(p) || p->szMalloc ){ + vdbeMemClear(p); + } +} + +/* ** Convert a 64-bit IEEE double into a 64-bit signed integer. ** If the double is out of range of a 64-bit signed integer then ** return the closest available 64-bit signed integer. @@ -60425,7 +63022,7 @@ ** If pMem is an integer, then the value is exact. If pMem is ** a floating-point then the value returned is the integer part. ** If pMem is a string or blob, then we make an attempt to convert -** it into a integer and return that. If pMem represents an +** it into an integer and return that. If pMem represents an ** an SQL-NULL value, return 0. ** ** If pMem represents a string value, its encoding might be changed. @@ -60438,11 +63035,10 @@ if( flags & MEM_Int ){ return pMem->u.i; }else if( flags & MEM_Real ){ - return doubleToInt64(pMem->r); + return doubleToInt64(pMem->u.r); }else if( flags & (MEM_Str|MEM_Blob) ){ i64 value = 0; assert( pMem->z || pMem->n==0 ); - testcase( pMem->z==0 ); sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc); return value; }else{ @@ -60460,7 +63056,7 @@ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); if( pMem->flags & MEM_Real ){ - return pMem->r; + return pMem->u.r; }else if( pMem->flags & MEM_Int ){ return (double)pMem->u.i; }else if( pMem->flags & (MEM_Str|MEM_Blob) ){ @@ -60479,12 +63075,13 @@ ** MEM_Int if we can. */ SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem *pMem){ + i64 ix; assert( pMem->flags & MEM_Real ); assert( (pMem->flags & MEM_RowSet)==0 ); assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); - pMem->u.i = doubleToInt64(pMem->r); + ix = doubleToInt64(pMem->u.r); /* Only mark the value as an integer if ** @@ -60496,11 +63093,9 @@ ** the second condition under the assumption that addition overflow causes ** values to wrap around. */ - if( pMem->r==(double)pMem->u.i - && pMem->u.i>SMALLEST_INT64 - && pMem->u.iflags |= MEM_Int; + if( pMem->u.r==ix && ix>SMALLEST_INT64 && ixu.i = ix; + MemSetTypeFlag(pMem, MEM_Int); } } @@ -60525,7 +63120,7 @@ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); - pMem->r = sqlite3VdbeRealValue(pMem); + pMem->u.r = sqlite3VdbeRealValue(pMem); MemSetTypeFlag(pMem, MEM_Real); return SQLITE_OK; } @@ -60545,7 +63140,7 @@ if( 0==sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc) ){ MemSetTypeFlag(pMem, MEM_Int); }else{ - pMem->r = sqlite3VdbeRealValue(pMem); + pMem->u.r = sqlite3VdbeRealValue(pMem); MemSetTypeFlag(pMem, MEM_Real); sqlite3VdbeIntegerAffinity(pMem); } @@ -60556,18 +63151,80 @@ } /* +** Cast the datatype of the value in pMem according to the affinity +** "aff". Casting is different from applying affinity in that a cast +** is forced. In other words, the value is converted into the desired +** affinity even if that results in loss of data. This routine is +** used (for example) to implement the SQL "cast()" operator. +*/ +SQLITE_PRIVATE void sqlite3VdbeMemCast(Mem *pMem, u8 aff, u8 encoding){ + if( pMem->flags & MEM_Null ) return; + switch( aff ){ + case SQLITE_AFF_NONE: { /* Really a cast to BLOB */ + if( (pMem->flags & MEM_Blob)==0 ){ + sqlite3ValueApplyAffinity(pMem, SQLITE_AFF_TEXT, encoding); + assert( pMem->flags & MEM_Str || pMem->db->mallocFailed ); + MemSetTypeFlag(pMem, MEM_Blob); + }else{ + pMem->flags &= ~(MEM_TypeMask&~MEM_Blob); + } + break; + } + case SQLITE_AFF_NUMERIC: { + sqlite3VdbeMemNumerify(pMem); + break; + } + case SQLITE_AFF_INTEGER: { + sqlite3VdbeMemIntegerify(pMem); + break; + } + case SQLITE_AFF_REAL: { + sqlite3VdbeMemRealify(pMem); + break; + } + default: { + assert( aff==SQLITE_AFF_TEXT ); + assert( MEM_Str==(MEM_Blob>>3) ); + pMem->flags |= (pMem->flags&MEM_Blob)>>3; + sqlite3ValueApplyAffinity(pMem, SQLITE_AFF_TEXT, encoding); + assert( pMem->flags & MEM_Str || pMem->db->mallocFailed ); + pMem->flags &= ~(MEM_Int|MEM_Real|MEM_Blob|MEM_Zero); + break; + } + } +} + +/* +** Initialize bulk memory to be a consistent Mem object. +** +** The minimum amount of initialization feasible is performed. +*/ +SQLITE_PRIVATE void sqlite3VdbeMemInit(Mem *pMem, sqlite3 *db, u16 flags){ + assert( (flags & ~MEM_TypeMask)==0 ); + pMem->flags = flags; + pMem->db = db; + pMem->szMalloc = 0; +} + + +/* ** Delete any previous value and set the value stored in *pMem to NULL. +** +** This routine calls the Mem.xDel destructor to dispose of values that +** require the destructor. But it preserves the Mem.zMalloc memory allocation. +** To free all resources, use sqlite3VdbeMemRelease(), which both calls this +** routine to invoke the destructor and deallocates Mem.zMalloc. +** +** Use this routine to reset the Mem prior to insert a new value. +** +** Use sqlite3VdbeMemRelease() to complete erase the Mem prior to abandoning it. */ SQLITE_PRIVATE void sqlite3VdbeMemSetNull(Mem *pMem){ - if( pMem->flags & MEM_Frame ){ - VdbeFrame *pFrame = pMem->u.pFrame; - pFrame->pParent = pFrame->v->pDelFrame; - pFrame->v->pDelFrame = pFrame; + if( VdbeMemDynamic(pMem) ){ + vdbeMemClearExternAndSetNull(pMem); + }else{ + pMem->flags = MEM_Null; } - if( pMem->flags & MEM_RowSet ){ - sqlite3RowSetClear(pMem->u.pRowSet); - } - MemSetTypeFlag(pMem, MEM_Null); } SQLITE_PRIVATE void sqlite3ValueSetNull(sqlite3_value *p){ sqlite3VdbeMemSetNull((Mem*)p); @@ -60584,24 +63241,31 @@ if( n<0 ) n = 0; pMem->u.nZero = n; pMem->enc = SQLITE_UTF8; + pMem->z = 0; +} -#ifdef SQLITE_OMIT_INCRBLOB - sqlite3VdbeMemGrow(pMem, n, 0); - if( pMem->z ){ - pMem->n = n; - memset(pMem->z, 0, n); - } -#endif +/* +** The pMem is known to contain content that needs to be destroyed prior +** to a value change. So invoke the destructor, then set the value to +** a 64-bit integer. +*/ +static SQLITE_NOINLINE void vdbeReleaseAndSetInt64(Mem *pMem, i64 val){ + sqlite3VdbeMemSetNull(pMem); + pMem->u.i = val; + pMem->flags = MEM_Int; } /* ** Delete any previous value and set the value stored in *pMem to val, ** manifest type INTEGER. */ SQLITE_PRIVATE void sqlite3VdbeMemSetInt64(Mem *pMem, i64 val){ - sqlite3VdbeMemRelease(pMem); - pMem->u.i = val; - pMem->flags = MEM_Int; + if( VdbeMemDynamic(pMem) ){ + vdbeReleaseAndSetInt64(pMem, val); + }else{ + pMem->u.i = val; + pMem->flags = MEM_Int; + } } #ifndef SQLITE_OMIT_FLOATING_POINT @@ -60610,11 +63274,9 @@ ** manifest type REAL. */ SQLITE_PRIVATE void sqlite3VdbeMemSetDouble(Mem *pMem, double val){ - if( sqlite3IsNaN(val) ){ - sqlite3VdbeMemSetNull(pMem); - }else{ - sqlite3VdbeMemRelease(pMem); - pMem->r = val; + sqlite3VdbeMemSetNull(pMem); + if( !sqlite3IsNaN(val) ){ + pMem->u.r = val; pMem->flags = MEM_Real; } } @@ -60632,10 +63294,11 @@ pMem->zMalloc = sqlite3DbMallocRaw(db, 64); if( db->mallocFailed ){ pMem->flags = MEM_Null; + pMem->szMalloc = 0; }else{ assert( pMem->zMalloc ); - pMem->u.pRowSet = sqlite3RowSetInit(db, pMem->zMalloc, - sqlite3DbMallocSize(db, pMem->zMalloc)); + pMem->szMalloc = sqlite3DbMallocSize(db, pMem->zMalloc); + pMem->u.pRowSet = sqlite3RowSetInit(db, pMem->zMalloc, pMem->szMalloc); assert( pMem->u.pRowSet!=0 ); pMem->flags = MEM_RowSet; } @@ -60659,7 +63322,7 @@ #ifdef SQLITE_DEBUG /* -** This routine prepares a memory cell for modication by breaking +** This routine prepares a memory cell for modification by breaking ** its link to a shallow copy and by marking any current shallow ** copies of this cell as invalid. ** @@ -60692,9 +63355,9 @@ */ SQLITE_PRIVATE void sqlite3VdbeMemShallowCopy(Mem *pTo, const Mem *pFrom, int srcType){ assert( (pFrom->flags & MEM_RowSet)==0 ); - VdbeMemRelease(pTo); + assert( pTo->db==pFrom->db ); + if( VdbeMemDynamic(pTo) ) vdbeMemClearExternAndSetNull(pTo); memcpy(pTo, pFrom, MEMCELLSIZE); - pTo->xDel = 0; if( (pFrom->flags&MEM_Static)==0 ){ pTo->flags &= ~(MEM_Dyn|MEM_Static|MEM_Ephem); assert( srcType==MEM_Ephem || srcType==MEM_Static ); @@ -60709,12 +63372,11 @@ SQLITE_PRIVATE int sqlite3VdbeMemCopy(Mem *pTo, const Mem *pFrom){ int rc = SQLITE_OK; + assert( pTo->db==pFrom->db ); assert( (pFrom->flags & MEM_RowSet)==0 ); - VdbeMemRelease(pTo); + if( VdbeMemDynamic(pTo) ) vdbeMemClearExternAndSetNull(pTo); memcpy(pTo, pFrom, MEMCELLSIZE); pTo->flags &= ~MEM_Dyn; - pTo->xDel = 0; - if( pTo->flags&(MEM_Str|MEM_Blob) ){ if( 0==(pFrom->flags&MEM_Static) ){ pTo->flags |= MEM_Ephem; @@ -60739,8 +63401,7 @@ sqlite3VdbeMemRelease(pTo); memcpy(pTo, pFrom, sizeof(Mem)); pFrom->flags = MEM_Null; - pFrom->xDel = 0; - pFrom->zMalloc = 0; + pFrom->szMalloc = 0; } /* @@ -60787,7 +63448,8 @@ if( nByte<0 ){ assert( enc!=0 ); if( enc==SQLITE_UTF8 ){ - for(nByte=0; nByte<=iLimit && z[nByte]; nByte++){} + nByte = sqlite3Strlen30(z); + if( nByte>iLimit ) nByte = iLimit+1; }else{ for(nByte=0; nByte<=iLimit && (z[nByte] | z[nByte+1]); nByte+=2){} } @@ -60806,14 +63468,17 @@ if( nByte>iLimit ){ return SQLITE_TOOBIG; } - if( sqlite3VdbeMemGrow(pMem, nAlloc, 0) ){ + testcase( nAlloc==0 ); + testcase( nAlloc==31 ); + testcase( nAlloc==32 ); + if( sqlite3VdbeMemClearAndResize(pMem, MAX(nAlloc,32)) ){ return SQLITE_NOMEM; } memcpy(pMem->z, z, nAlloc); }else if( xDel==SQLITE_DYNAMIC ){ sqlite3VdbeMemRelease(pMem); pMem->zMalloc = pMem->z = (char *)z; - pMem->xDel = 0; + pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc); }else{ sqlite3VdbeMemRelease(pMem); pMem->z = (char *)z; @@ -60845,8 +63510,11 @@ ** key is true to get the key or false to get data. The result is written ** into the pMem element. ** -** The pMem structure is assumed to be uninitialized. Any prior content -** is overwritten without being freed. +** The pMem object must have been initialized. This routine will use +** pMem->zMalloc to hold the content from the btree, if possible. New +** pMem->zMalloc space will be allocated if necessary. The calling routine +** is responsible for making sure that the pMem object is eventually +** destroyed. ** ** If this routine fails for any reason (malloc returns NULL or unable ** to read from the disk) then the pMem is left in an inconsistent state. @@ -60863,6 +63531,7 @@ int rc = SQLITE_OK; /* Return code */ assert( sqlite3BtreeCursorIsValid(pCur) ); + assert( !VdbeMemDynamic(pMem) ); /* Note: the calls to BtreeKeyFetch() and DataFetch() below assert() ** that both the BtShared and database handle mutexes are held. */ @@ -60875,54 +63544,50 @@ assert( zData!=0 ); if( offset+amt<=available ){ - sqlite3VdbeMemRelease(pMem); pMem->z = &zData[offset]; pMem->flags = MEM_Blob|MEM_Ephem; pMem->n = (int)amt; - }else if( SQLITE_OK==(rc = sqlite3VdbeMemGrow(pMem, amt+2, 0)) ){ - if( key ){ - rc = sqlite3BtreeKey(pCur, offset, amt, pMem->z); - }else{ - rc = sqlite3BtreeData(pCur, offset, amt, pMem->z); + }else{ + pMem->flags = MEM_Null; + if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+2)) ){ + if( key ){ + rc = sqlite3BtreeKey(pCur, offset, amt, pMem->z); + }else{ + rc = sqlite3BtreeData(pCur, offset, amt, pMem->z); + } + if( rc==SQLITE_OK ){ + pMem->z[amt] = 0; + pMem->z[amt+1] = 0; + pMem->flags = MEM_Blob|MEM_Term; + pMem->n = (int)amt; + }else{ + sqlite3VdbeMemRelease(pMem); + } } - if( rc==SQLITE_OK ){ - pMem->z[amt] = 0; - pMem->z[amt+1] = 0; - pMem->flags = MEM_Blob|MEM_Term; - pMem->n = (int)amt; - }else{ - sqlite3VdbeMemRelease(pMem); - } } return rc; } -/* This function is only available internally, it is not part of the -** external API. It works in a similar way to sqlite3_value_text(), -** except the data returned is in the encoding specified by the second -** parameter, which must be one of SQLITE_UTF16BE, SQLITE_UTF16LE or -** SQLITE_UTF8. -** -** (2006-02-16:) The enc value can be or-ed with SQLITE_UTF16_ALIGNED. -** If that is the case, then the result must be aligned on an even byte -** boundary. +/* +** The pVal argument is known to be a value other than NULL. +** Convert it into a string with encoding enc and return a pointer +** to a zero-terminated version of that string. */ -SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value* pVal, u8 enc){ - if( !pVal ) return 0; - +static SQLITE_NOINLINE const void *valueToText(sqlite3_value* pVal, u8 enc){ + assert( pVal!=0 ); assert( pVal->db==0 || sqlite3_mutex_held(pVal->db->mutex) ); assert( (enc&3)==(enc&~SQLITE_UTF16_ALIGNED) ); assert( (pVal->flags & MEM_RowSet)==0 ); - - if( pVal->flags&MEM_Null ){ - return 0; - } - assert( (MEM_Blob>>3) == MEM_Str ); - pVal->flags |= (pVal->flags & MEM_Blob)>>3; - ExpandBlob(pVal); - if( pVal->flags&MEM_Str ){ - sqlite3VdbeChangeEncoding(pVal, enc & ~SQLITE_UTF16_ALIGNED); + assert( (pVal->flags & (MEM_Null))==0 ); + if( pVal->flags & (MEM_Blob|MEM_Str) ){ + pVal->flags |= MEM_Str; + if( pVal->flags & MEM_Zero ){ + sqlite3VdbeMemExpandBlob(pVal); + } + if( pVal->enc != (enc & ~SQLITE_UTF16_ALIGNED) ){ + sqlite3VdbeChangeEncoding(pVal, enc & ~SQLITE_UTF16_ALIGNED); + } if( (enc & SQLITE_UTF16_ALIGNED)!=0 && 1==(1&SQLITE_PTR_TO_INT(pVal->z)) ){ assert( (pVal->flags & (MEM_Ephem|MEM_Static))!=0 ); if( sqlite3VdbeMemMakeWriteable(pVal)!=SQLITE_OK ){ @@ -60931,8 +63596,7 @@ } sqlite3VdbeMemNulTerminate(pVal); /* IMP: R-31275-44060 */ }else{ - assert( (pVal->flags&MEM_Blob)==0 ); - sqlite3VdbeMemStringify(pVal, enc); + sqlite3VdbeMemStringify(pVal, enc, 0); assert( 0==(1&SQLITE_PTR_TO_INT(pVal->z)) ); } assert(pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) || pVal->db==0 @@ -60944,6 +63608,30 @@ } } +/* This function is only available internally, it is not part of the +** external API. It works in a similar way to sqlite3_value_text(), +** except the data returned is in the encoding specified by the second +** parameter, which must be one of SQLITE_UTF16BE, SQLITE_UTF16LE or +** SQLITE_UTF8. +** +** (2006-02-16:) The enc value can be or-ed with SQLITE_UTF16_ALIGNED. +** If that is the case, then the result must be aligned on an even byte +** boundary. +*/ +SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value* pVal, u8 enc){ + if( !pVal ) return 0; + assert( pVal->db==0 || sqlite3_mutex_held(pVal->db->mutex) ); + assert( (enc&3)==(enc&~SQLITE_UTF16_ALIGNED) ); + assert( (pVal->flags & MEM_RowSet)==0 ); + if( (pVal->flags&(MEM_Str|MEM_Term))==(MEM_Str|MEM_Term) && pVal->enc==enc ){ + return pVal->z; + } + if( pVal->flags&MEM_Null ){ + return 0; + } + return valueToText(pVal, enc); +} + /* ** Create a new sqlite3_value object. */ @@ -61048,9 +63736,20 @@ *ppVal = 0; return SQLITE_OK; } - op = pExpr->op; + while( (op = pExpr->op)==TK_UPLUS ) pExpr = pExpr->pLeft; if( NEVER(op==TK_REGISTER) ) op = pExpr->op2; + if( op==TK_CAST ){ + u8 aff = sqlite3AffinityType(pExpr->u.zToken,0); + rc = valueFromExpr(db, pExpr->pLeft, enc, aff, ppVal, pCtx); + testcase( rc!=SQLITE_OK ); + if( *ppVal ){ + sqlite3VdbeMemCast(*ppVal, aff, SQLITE_UTF8); + sqlite3ValueApplyAffinity(*ppVal, affinity, SQLITE_UTF8); + } + return rc; + } + /* Handle negative integers in a single step. This is needed in the ** case when the value is -9223372036854775808. */ @@ -61087,14 +63786,14 @@ && pVal!=0 ){ sqlite3VdbeMemNumerify(pVal); - if( pVal->u.i==SMALLEST_INT64 ){ - pVal->flags &= ~MEM_Int; - pVal->flags |= MEM_Real; - pVal->r = (double)SMALLEST_INT64; + if( pVal->flags & MEM_Real ){ + pVal->u.r = -pVal->u.r; + }else if( pVal->u.i==SMALLEST_INT64 ){ + pVal->u.r = -(double)SMALLEST_INT64; + MemSetTypeFlag(pVal, MEM_Real); }else{ pVal->u.i = -pVal->u.i; } - pVal->r = -pVal->r; sqlite3ValueApplyAffinity(pVal, affinity, enc); } }else if( op==TK_NULL ){ @@ -61185,7 +63884,7 @@ sqlite3_result_error_nomem(context); }else{ aRet[0] = nSerial+1; - sqlite3PutVarint(&aRet[1], iSerial); + putVarint32(&aRet[1], iSerial); sqlite3VdbeSerialPut(&aRet[1+nSerial], argv[0], iSerial); sqlite3_result_blob(context, aRet, nRet, SQLITE_TRANSIENT); sqlite3DbFree(db, aRet); @@ -61208,6 +63907,68 @@ } /* +** Attempt to extract a value from pExpr and use it to construct *ppVal. +** +** If pAlloc is not NULL, then an UnpackedRecord object is created for +** pAlloc if one does not exist and the new value is added to the +** UnpackedRecord object. +** +** A value is extracted in the following cases: +** +** * (pExpr==0). In this case the value is assumed to be an SQL NULL, +** +** * The expression is a bound variable, and this is a reprepare, or +** +** * The expression is a literal value. +** +** On success, *ppVal is made to point to the extracted value. The caller +** is responsible for ensuring that the value is eventually freed. +*/ +static int stat4ValueFromExpr( + Parse *pParse, /* Parse context */ + Expr *pExpr, /* The expression to extract a value from */ + u8 affinity, /* Affinity to use */ + struct ValueNewStat4Ctx *pAlloc,/* How to allocate space. Or NULL */ + sqlite3_value **ppVal /* OUT: New value object (or NULL) */ +){ + int rc = SQLITE_OK; + sqlite3_value *pVal = 0; + sqlite3 *db = pParse->db; + + /* Skip over any TK_COLLATE nodes */ + pExpr = sqlite3ExprSkipCollate(pExpr); + + if( !pExpr ){ + pVal = valueNew(db, pAlloc); + if( pVal ){ + sqlite3VdbeMemSetNull((Mem*)pVal); + } + }else if( pExpr->op==TK_VARIABLE + || NEVER(pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE) + ){ + Vdbe *v; + int iBindVar = pExpr->iColumn; + sqlite3VdbeSetVarmask(pParse->pVdbe, iBindVar); + if( (v = pParse->pReprepare)!=0 ){ + pVal = valueNew(db, pAlloc); + if( pVal ){ + rc = sqlite3VdbeMemCopy((Mem*)pVal, &v->aVar[iBindVar-1]); + if( rc==SQLITE_OK ){ + sqlite3ValueApplyAffinity(pVal, affinity, ENC(db)); + } + pVal->db = pParse->db; + } + } + }else{ + rc = valueFromExpr(db, pExpr, ENC(db), affinity, &pVal, pAlloc); + } + + assert( pVal==0 || pVal->db==db ); + *ppVal = pVal; + return rc; +} + +/* ** This function is used to allocate and populate UnpackedRecord ** structures intended to be compared against sample index keys stored ** in the sqlite_stat4 table. @@ -61246,51 +64007,89 @@ int iVal, /* Array element to populate */ int *pbOk /* OUT: True if value was extracted */ ){ - int rc = SQLITE_OK; + int rc; sqlite3_value *pVal = 0; - sqlite3 *db = pParse->db; - - struct ValueNewStat4Ctx alloc; + alloc.pParse = pParse; alloc.pIdx = pIdx; alloc.ppRec = ppRec; alloc.iVal = iVal; - /* Skip over any TK_COLLATE nodes */ - pExpr = sqlite3ExprSkipCollate(pExpr); - - if( !pExpr ){ - pVal = valueNew(db, &alloc); - if( pVal ){ - sqlite3VdbeMemSetNull((Mem*)pVal); - } - }else if( pExpr->op==TK_VARIABLE - || NEVER(pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE) - ){ - Vdbe *v; - int iBindVar = pExpr->iColumn; - sqlite3VdbeSetVarmask(pParse->pVdbe, iBindVar); - if( (v = pParse->pReprepare)!=0 ){ - pVal = valueNew(db, &alloc); - if( pVal ){ - rc = sqlite3VdbeMemCopy((Mem*)pVal, &v->aVar[iBindVar-1]); - if( rc==SQLITE_OK ){ - sqlite3ValueApplyAffinity(pVal, affinity, ENC(db)); - } - pVal->db = pParse->db; - } - } - }else{ - rc = valueFromExpr(db, pExpr, ENC(db), affinity, &pVal, &alloc); - } + rc = stat4ValueFromExpr(pParse, pExpr, affinity, &alloc, &pVal); + assert( pVal==0 || pVal->db==pParse->db ); *pbOk = (pVal!=0); - - assert( pVal==0 || pVal->db==db ); return rc; } /* +** Attempt to extract a value from expression pExpr using the methods +** as described for sqlite3Stat4ProbeSetValue() above. +** +** If successful, set *ppVal to point to a new value object and return +** SQLITE_OK. If no value can be extracted, but no other error occurs +** (e.g. OOM), return SQLITE_OK and set *ppVal to NULL. Or, if an error +** does occur, return an SQLite error code. The final value of *ppVal +** is undefined in this case. +*/ +SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr( + Parse *pParse, /* Parse context */ + Expr *pExpr, /* The expression to extract a value from */ + u8 affinity, /* Affinity to use */ + sqlite3_value **ppVal /* OUT: New value object (or NULL) */ +){ + return stat4ValueFromExpr(pParse, pExpr, affinity, 0, ppVal); +} + +/* +** Extract the iCol-th column from the nRec-byte record in pRec. Write +** the column value into *ppVal. If *ppVal is initially NULL then a new +** sqlite3_value object is allocated. +** +** If *ppVal is initially NULL then the caller is responsible for +** ensuring that the value written into *ppVal is eventually freed. +*/ +SQLITE_PRIVATE int sqlite3Stat4Column( + sqlite3 *db, /* Database handle */ + const void *pRec, /* Pointer to buffer containing record */ + int nRec, /* Size of buffer pRec in bytes */ + int iCol, /* Column to extract */ + sqlite3_value **ppVal /* OUT: Extracted value */ +){ + u32 t; /* a column type code */ + int nHdr; /* Size of the header in the record */ + int iHdr; /* Next unread header byte */ + int iField; /* Next unread data byte */ + int szField; /* Size of the current data field */ + int i; /* Column index */ + u8 *a = (u8*)pRec; /* Typecast byte array */ + Mem *pMem = *ppVal; /* Write result into this Mem object */ + + assert( iCol>0 ); + iHdr = getVarint32(a, nHdr); + if( nHdr>nRec || iHdr>=nHdr ) return SQLITE_CORRUPT_BKPT; + iField = nHdr; + for(i=0; i<=iCol; i++){ + iHdr += getVarint32(&a[iHdr], t); + testcase( iHdr==nHdr ); + testcase( iHdr==nHdr+1 ); + if( iHdr>nHdr ) return SQLITE_CORRUPT_BKPT; + szField = sqlite3VdbeSerialTypeLen(t); + iField += szField; + } + testcase( iField==nRec ); + testcase( iField==nRec+1 ); + if( iField>nRec ) return SQLITE_CORRUPT_BKPT; + if( pMem==0 ){ + pMem = *ppVal = sqlite3ValueNew(db); + if( pMem==0 ) return SQLITE_NOMEM; + } + sqlite3VdbeSerialGet(&a[iField-szField], t, pMem); + pMem->enc = ENC(db); + return SQLITE_OK; +} + +/* ** Unless it is NULL, the argument must be an UnpackedRecord object returned ** by an earlier call to sqlite3Stat4ProbeSetValue(). This call deletes ** the object. @@ -61302,7 +64101,7 @@ Mem *aMem = pRec->aMem; sqlite3 *db = aMem[0].db; for(i=0; ipKeyInfo); sqlite3DbFree(db, pRec); @@ -61362,9 +64161,7 @@ ** ************************************************************************* ** This file contains code used for creating, destroying, and populating -** a VDBE (or an "sqlite3_stmt" as it is known to the outside world.) Prior -** to version 2.8.7, all this code was combined into the vdbe.c source file. -** But that file was getting too big so this subroutines were split out. +** a VDBE (or an "sqlite3_stmt" as it is known to the outside world.) */ /* @@ -61434,18 +64231,35 @@ } /* -** Resize the Vdbe.aOp array so that it is at least one op larger than -** it was. +** Resize the Vdbe.aOp array so that it is at least nOp elements larger +** than its current size. nOp is guaranteed to be less than or equal +** to 1024/sizeof(Op). ** ** If an out-of-memory error occurs while resizing the array, return -** SQLITE_NOMEM. In this case Vdbe.aOp and Vdbe.nOpAlloc remain +** SQLITE_NOMEM. In this case Vdbe.aOp and Parse.nOpAlloc remain ** unchanged (this is so that any opcodes already allocated can be ** correctly deallocated along with the rest of the Vdbe). */ -static int growOpArray(Vdbe *v){ +static int growOpArray(Vdbe *v, int nOp){ VdbeOp *pNew; Parse *p = v->pParse; + + /* The SQLITE_TEST_REALLOC_STRESS compile-time option is designed to force + ** more frequent reallocs and hence provide more opportunities for + ** simulated OOM faults. SQLITE_TEST_REALLOC_STRESS is generally used + ** during testing only. With SQLITE_TEST_REALLOC_STRESS grow the op array + ** by the minimum* amount required until the size reaches 512. Normal + ** operation (without SQLITE_TEST_REALLOC_STRESS) is to double the current + ** size of the op array or add 1KB of space, whichever is smaller. */ +#ifdef SQLITE_TEST_REALLOC_STRESS + int nNew = (p->nOpAlloc>=512 ? p->nOpAlloc*2 : p->nOpAlloc+nOp); +#else int nNew = (p->nOpAlloc ? p->nOpAlloc*2 : (int)(1024/sizeof(Op))); + UNUSED_PARAMETER(nOp); +#endif + + assert( nOp<=(1024/sizeof(Op)) ); + assert( nNew>=(p->nOpAlloc+nOp) ); pNew = sqlite3DbRealloc(p->db, v->aOp, nNew*sizeof(Op)); if( pNew ){ p->nOpAlloc = sqlite3DbMallocSize(p->db, pNew)/sizeof(Op); @@ -61489,7 +64303,7 @@ assert( p->magic==VDBE_MAGIC_INIT ); assert( op>0 && op<0xff ); if( p->pParse->nOpAlloc<=i ){ - if( growOpArray(p) ){ + if( growOpArray(p, 1) ){ return 1; } } @@ -61626,7 +64440,7 @@ int j = -1-x; assert( v->magic==VDBE_MAGIC_INIT ); assert( jnLabel ); - if( j>=0 && p->aLabel ){ + if( ALWAYS(j>=0) && p->aLabel ){ p->aLabel[j] = v->nOp; } p->iFixedOp = v->nOp - 1; @@ -61731,6 +64545,7 @@ */ SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *v, int mayAbort){ int hasAbort = 0; + int hasFkCounter = 0; Op *pOp; VdbeOpIter sIter; memset(&sIter, 0, sizeof(sIter)); @@ -61739,15 +64554,17 @@ while( (pOp = opIterNext(&sIter))!=0 ){ int opcode = pOp->opcode; if( opcode==OP_Destroy || opcode==OP_VUpdate || opcode==OP_VRename -#ifndef SQLITE_OMIT_FOREIGN_KEY - || (opcode==OP_FkCounter && pOp->p1==0 && pOp->p2==1) -#endif || ((opcode==OP_Halt || opcode==OP_HaltIfNull) && ((pOp->p1&0xff)==SQLITE_CONSTRAINT && pOp->p2==OE_Abort)) ){ hasAbort = 1; break; } +#ifndef SQLITE_OMIT_FOREIGN_KEY + if( opcode==OP_FkCounter && pOp->p1==0 && pOp->p2==1 ){ + hasFkCounter = 1; + } +#endif } sqlite3DbFree(v->db, sIter.apSub); @@ -61756,7 +64573,7 @@ ** through all opcodes and hasAbort may be set incorrectly. Return ** true for this case to prevent the assert() in the callers frame ** from failing. */ - return ( v->db->mallocFailed || hasAbort==mayAbort ); + return ( v->db->mallocFailed || hasAbort==mayAbort || hasFkCounter ); } #endif /* SQLITE_DEBUG - the sqlite3AssertMayAbort() function */ @@ -61849,7 +64666,7 @@ pParse->aLabel = 0; pParse->nLabel = 0; *pMaxFuncArgs = nMaxArgs; - assert( p->bIsReader!=0 || p->btreeMask==0 ); + assert( p->bIsReader!=0 || DbMaskAllZero(p->btreeMask) ); } /* @@ -61876,7 +64693,7 @@ assert( aOp && !p->db->mallocFailed ); /* Check that sqlite3VdbeUsesBtree() was not called on this VM */ - assert( p->btreeMask==0 ); + assert( DbMaskAllZero(p->btreeMask) ); resolveP2Values(p, pnMaxArg); *pnOp = p->nOp; @@ -61891,7 +64708,7 @@ SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe *p, int nOp, VdbeOpList const *aOp, int iLineno){ int addr; assert( p->magic==VDBE_MAGIC_INIT ); - if( p->nOp + nOp > p->pParse->nOpAlloc && growOpArray(p) ){ + if( p->nOp + nOp > p->pParse->nOpAlloc && growOpArray(p, nOp) ){ return 0; } addr = p->nOp; @@ -61932,7 +64749,35 @@ return addr; } +#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) /* +** Add an entry to the array of counters managed by sqlite3_stmt_scanstatus(). +*/ +SQLITE_PRIVATE void sqlite3VdbeScanStatus( + Vdbe *p, /* VM to add scanstatus() to */ + int addrExplain, /* Address of OP_Explain (or 0) */ + int addrLoop, /* Address of loop counter */ + int addrVisit, /* Address of rows visited counter */ + LogEst nEst, /* Estimated number of output rows */ + const char *zName /* Name of table or index being scanned */ +){ + int nByte = (p->nScan+1) * sizeof(ScanStatus); + ScanStatus *aNew; + aNew = (ScanStatus*)sqlite3DbRealloc(p->db, p->aScan, nByte); + if( aNew ){ + ScanStatus *pNew = &aNew[p->nScan++]; + pNew->addrExplain = addrExplain; + pNew->addrLoop = addrLoop; + pNew->addrVisit = addrVisit; + pNew->nEst = nEst; + pNew->zName = sqlite3DbStrDup(p->db, zName); + p->aScan = aNew; + } +} +#endif + + +/* ** Change the value of the P1 operand for a specific instruction. ** This routine is useful when a large program is loaded from a ** static array using sqlite3VdbeAddOpList but we want to make a @@ -62031,7 +64876,7 @@ sqlite3ValueFree((sqlite3_value*)p4); }else{ Mem *p = (Mem*)p4; - sqlite3DbFree(db, p->zMalloc); + if( p->szMalloc ) sqlite3DbFree(db, p->zMalloc); sqlite3DbFree(db, p); } break; @@ -62076,7 +64921,7 @@ ** Change the opcode at addr into OP_Noop */ SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe *p, int addr){ - if( p->aOp ){ + if( addrnOp ){ VdbeOp *pOp = &p->aOp[addr]; sqlite3 *db = p->db; freeP4(db, pOp->p4type, pOp->p4.p); @@ -62087,7 +64932,8 @@ } /* -** Remove the last opcode inserted +** If the last opcode is "op" and it is not a jump destination, +** then remove it. Return true if and only if an opcode was removed. */ SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe *p, u8 op){ if( (p->nOp-1)>(p->pParse->iFixedOp) && p->aOp[p->nOp-1].opcode==op ){ @@ -62133,7 +64979,9 @@ addr = p->nOp - 1; } pOp = &p->aOp[addr]; - assert( pOp->p4type==P4_NOTUSED || pOp->p4type==P4_INT32 ); + assert( pOp->p4type==P4_NOTUSED + || pOp->p4type==P4_INT32 + || pOp->p4type==P4_KEYINFO ); freeP4(db, pOp->p4type, pOp->p4.p); pOp->p4.p = 0; if( n==P4_INT32 ){ @@ -62226,7 +65074,7 @@ ** routine, then a pointer to a dummy VdbeOp will be returned. That opcode ** is readable but not writable, though it is cast to a writable value. ** The return of a dummy opcode allows the call to continue functioning -** after a OOM fault without having to check to see if the return from +** after an OOM fault without having to check to see if the return from ** this routine is a valid pointer. But because the dummy.opcode is 0, ** dummy will never be written to. This is verified by code inspection and ** by running with Valgrind. @@ -62407,7 +65255,7 @@ }else if( pMem->flags & MEM_Int ){ sqlite3_snprintf(nTemp, zTemp, "%lld", pMem->u.i); }else if( pMem->flags & MEM_Real ){ - sqlite3_snprintf(nTemp, zTemp, "%.16g", pMem->r); + sqlite3_snprintf(nTemp, zTemp, "%.16g", pMem->u.r); }else if( pMem->flags & MEM_Null ){ sqlite3_snprintf(nTemp, zTemp, "NULL"); }else{ @@ -62459,9 +65307,9 @@ SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe *p, int i){ assert( i>=0 && idb->nDb && i<(int)sizeof(yDbMask)*8 ); assert( i<(int)sizeof(p->btreeMask)*8 ); - p->btreeMask |= ((yDbMask)1)<btreeMask, i); if( i!=1 && sqlite3BtreeSharable(p->db->aDb[i].pBt) ){ - p->lockMask |= ((yDbMask)1)<lockMask, i); } } @@ -62489,16 +65337,15 @@ */ SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe *p){ int i; - yDbMask mask; sqlite3 *db; Db *aDb; int nDb; - if( p->lockMask==0 ) return; /* The common case */ + if( DbMaskAllZero(p->lockMask) ) return; /* The common case */ db = p->db; aDb = db->aDb; nDb = db->nDb; - for(i=0, mask=1; ilockMask)!=0 && ALWAYS(aDb[i].pBt!=0) ){ + for(i=0; ilockMask,i) && ALWAYS(aDb[i].pBt!=0) ){ sqlite3BtreeEnter(aDb[i].pBt); } } @@ -62511,16 +65358,15 @@ */ SQLITE_PRIVATE void sqlite3VdbeLeave(Vdbe *p){ int i; - yDbMask mask; sqlite3 *db; Db *aDb; int nDb; - if( p->lockMask==0 ) return; /* The common case */ + if( DbMaskAllZero(p->lockMask) ) return; /* The common case */ db = p->db; aDb = db->aDb; nDb = db->nDb; - for(i=0, mask=1; ilockMask)!=0 && ALWAYS(aDb[i].pBt!=0) ){ + for(i=0; ilockMask,i) && ALWAYS(aDb[i].pBt!=0) ){ sqlite3BtreeLeave(aDb[i].pBt); } } @@ -62559,16 +65405,16 @@ */ static void releaseMemArray(Mem *p, int N){ if( p && N ){ - Mem *pEnd; + Mem *pEnd = &p[N]; sqlite3 *db = p->db; u8 malloc_failed = db->mallocFailed; if( db->pnBytesFreed ){ - for(pEnd=&p[N]; pzMalloc); - } + do{ + if( p->szMalloc ) sqlite3DbFree(db, p->zMalloc); + }while( (++p)flags & MEM_RowSet ); if( p->flags&(MEM_Agg|MEM_Dyn|MEM_Frame|MEM_RowSet) ){ sqlite3VdbeMemRelease(p); - }else if( p->zMalloc ){ + }else if( p->szMalloc ){ sqlite3DbFree(db, p->zMalloc); - p->zMalloc = 0; + p->szMalloc = 0; } p->flags = MEM_Undefined; - } + }while( (++p)mallocFailed = malloc_failed; } } @@ -62759,7 +65605,7 @@ pMem->u.i = pOp->p3; /* P3 */ pMem++; - if( sqlite3VdbeMemGrow(pMem, 32, 0) ){ /* P4 */ + if( sqlite3VdbeMemClearAndResize(pMem, 32) ){ /* P4 */ assert( p->db->mallocFailed ); return SQLITE_ERROR; } @@ -62775,7 +65621,7 @@ pMem++; if( p->explain==1 ){ - if( sqlite3VdbeMemGrow(pMem, 4, 0) ){ + if( sqlite3VdbeMemClearAndResize(pMem, 4) ){ assert( p->db->mallocFailed ); return SQLITE_ERROR; } @@ -62786,7 +65632,7 @@ pMem++; #ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS - if( sqlite3VdbeMemGrow(pMem, 500, 0) ){ + if( sqlite3VdbeMemClearAndResize(pMem, 500) ){ assert( p->db->mallocFailed ); return SQLITE_ERROR; } @@ -62939,13 +65785,13 @@ /* ** Prepare a virtual machine for execution for the first time after ** creating the virtual machine. This involves things such -** as allocating stack space and initializing the program counter. +** as allocating registers and initializing the program counter. ** After the VDBE has be prepped, it can be executed by one or more ** calls to sqlite3VdbeExec(). ** -** This function may be called exact once on a each virtual machine. +** This function may be called exactly once on each virtual machine. ** After this routine is called the VM has been "packaged" and is ready -** to run. After this routine is called, futher calls to +** to run. After this routine is called, further calls to ** sqlite3VdbeAddOp() functions are prohibited. This routine disconnects ** the Vdbe from the Parse object that helped generate it so that the ** the Vdbe becomes an independent entity and the Parse object can be @@ -63029,6 +65875,9 @@ p->apCsr = allocSpace(p->apCsr, nCursor*sizeof(VdbeCursor*), &zCsr, zEnd, &nByte); p->aOnceFlag = allocSpace(p->aOnceFlag, nOnce, &zCsr, zEnd, &nByte); +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + p->anExec = allocSpace(p->anExec, p->nOp*sizeof(i64), &zCsr, zEnd, &nByte); +#endif if( nByte ){ p->pFree = sqlite3DbMallocZero(db, nByte); } @@ -63045,7 +65894,7 @@ p->aVar[n].db = db; } } - if( p->azVar ){ + if( p->azVar && pParse->nzVar>0 ){ p->nzVar = pParse->nzVar; memcpy(p->azVar, pParse->azVar, p->nzVar*sizeof(p->azVar[0])); memset(pParse->azVar, 0, pParse->nzVar*sizeof(pParse->azVar[0])); @@ -63079,7 +65928,7 @@ sqlite3BtreeCloseCursor(pCx->pCursor); } #ifndef SQLITE_OMIT_VIRTUALTABLE - if( pCx->pVtabCursor ){ + else if( pCx->pVtabCursor ){ sqlite3_vtab_cursor *pVtabCursor = pCx->pVtabCursor; const sqlite3_module *pModule = pVtabCursor->pVtab->pModule; p->inVtabMethod = 1; @@ -63096,6 +65945,9 @@ */ SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *pFrame){ Vdbe *v = pFrame->v; +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + v->anExec = pFrame->anExec; +#endif v->aOnceFlag = pFrame->aOnceFlag; v->nOnceFlag = pFrame->nOnceFlag; v->aOp = pFrame->aOp; @@ -63106,6 +65958,7 @@ v->nCursor = pFrame->nCursor; v->db->lastRowid = pFrame->lastRowid; v->nChange = pFrame->nChange; + v->db->nChange = pFrame->nDbChange; return pFrame->pc; } @@ -63122,9 +65975,10 @@ VdbeFrame *pFrame; for(pFrame=p->pFrame; pFrame->pParent; pFrame=pFrame->pParent); sqlite3VdbeFrameRestore(pFrame); + p->pFrame = 0; + p->nFrame = 0; } - p->pFrame = 0; - p->nFrame = 0; + assert( p->nFrame==0 ); if( p->apCsr ){ int i; @@ -63146,16 +66000,12 @@ } /* Delete any auxdata allocations made by the VM */ - sqlite3VdbeDeleteAuxData(p, -1, 0); + if( p->pAuxData ) sqlite3VdbeDeleteAuxData(p, -1, 0); assert( p->pAuxData==0 ); } /* -** Clean up the VM after execution. -** -** This routine will automatically close any cursors, lists, and/or -** sorters that were left open. It also deletes the values of -** variables in the aVar[] array. +** Clean up the VM after a single run. */ static void Cleanup(Vdbe *p){ sqlite3 *db = p->db; @@ -63323,7 +66173,7 @@ /* The complex case - There is a multi-file write-transaction active. ** This requires a master journal file to ensure the transaction is - ** committed atomicly. + ** committed atomically. */ #ifndef SQLITE_OMIT_DISKIO else{ @@ -63491,7 +66341,7 @@ int nRead = 0; p = db->pVdbe; while( p ){ - if( p->magic==VDBE_MAGIC_RUN && p->pc>=0 ){ + if( sqlite3_stmt_busy((sqlite3_stmt*)p) ){ cnt++; if( p->readOnly==0 ) nWrite++; if( p->bIsReader ) nRead++; @@ -63651,7 +66501,6 @@ /* Check for one of the special errors */ mrc = p->rc & 0xff; - assert( p->rc!=SQLITE_IOERR_BLOCKED ); /* This error no longer exists */ isSpecialError = mrc==SQLITE_NOMEM || mrc==SQLITE_IOERR || mrc==SQLITE_INTERRUPT || mrc==SQLITE_FULL; if( isSpecialError ){ @@ -63677,6 +66526,7 @@ sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK); sqlite3CloseSavepoints(db); db->autoCommit = 1; + p->nChange = 0; } } } @@ -63717,6 +66567,7 @@ }else if( rc!=SQLITE_OK ){ p->rc = rc; sqlite3RollbackAll(db, SQLITE_OK); + p->nChange = 0; }else{ db->nDeferredCons = 0; db->nDeferredImmCons = 0; @@ -63725,6 +66576,7 @@ } }else{ sqlite3RollbackAll(db, SQLITE_OK); + p->nChange = 0; } db->nStatement = 0; }else if( eStatementOp==0 ){ @@ -63736,6 +66588,7 @@ sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK); sqlite3CloseSavepoints(db); db->autoCommit = 1; + p->nChange = 0; } } @@ -63756,6 +66609,7 @@ sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK); sqlite3CloseSavepoints(db); db->autoCommit = 1; + p->nChange = 0; } } @@ -63831,7 +66685,7 @@ db->mallocFailed = mallocFailed; db->errCode = rc; }else{ - sqlite3Error(db, rc, 0); + sqlite3Error(db, rc); } return rc; } @@ -63894,7 +66748,7 @@ ** to sqlite3_step(). For consistency (since sqlite3_step() was ** called), set the database error in this case as well. */ - sqlite3Error(db, p->rc, p->zErrMsg ? "%s" : 0, p->zErrMsg); + sqlite3ErrorWithMsg(db, p->rc, p->zErrMsg ? "%s" : 0, p->zErrMsg); sqlite3DbFree(db, p->zErrMsg); p->zErrMsg = 0; } @@ -63972,7 +66826,7 @@ ** from left to right), or ** ** * the corresponding bit in argument mask is clear (where the first -** function parameter corrsponds to bit 0 etc.). +** function parameter corresponds to bit 0 etc.). */ SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(Vdbe *pVdbe, int iOp, int mask){ AuxData **pp = &pVdbe->pAuxData; @@ -64017,9 +66871,11 @@ sqlite3DbFree(db, p->aColName); sqlite3DbFree(db, p->zSql); sqlite3DbFree(db, p->pFree); -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) - sqlite3DbFree(db, p->zExplain); - sqlite3DbFree(db, p->pExplain); +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + for(i=0; inScan; i++){ + sqlite3DbFree(db, p->aScan[i].zName); + } + sqlite3DbFree(db, p->aScan); #endif } @@ -64048,6 +66904,57 @@ } /* +** The cursor "p" has a pending seek operation that has not yet been +** carried out. Seek the cursor now. If an error occurs, return +** the appropriate error code. +*/ +static int SQLITE_NOINLINE handleDeferredMoveto(VdbeCursor *p){ + int res, rc; +#ifdef SQLITE_TEST + extern int sqlite3_search_count; +#endif + assert( p->deferredMoveto ); + assert( p->isTable ); + rc = sqlite3BtreeMovetoUnpacked(p->pCursor, 0, p->movetoTarget, 0, &res); + if( rc ) return rc; + if( res!=0 ) return SQLITE_CORRUPT_BKPT; +#ifdef SQLITE_TEST + sqlite3_search_count++; +#endif + p->deferredMoveto = 0; + p->cacheStatus = CACHE_STALE; + return SQLITE_OK; +} + +/* +** Something has moved cursor "p" out of place. Maybe the row it was +** pointed to was deleted out from under it. Or maybe the btree was +** rebalanced. Whatever the cause, try to restore "p" to the place it +** is supposed to be pointing. If the row was deleted out from under the +** cursor, set the cursor to point to a NULL row. +*/ +static int SQLITE_NOINLINE handleMovedCursor(VdbeCursor *p){ + int isDifferentRow, rc; + assert( p->pCursor!=0 ); + assert( sqlite3BtreeCursorHasMoved(p->pCursor) ); + rc = sqlite3BtreeCursorRestore(p->pCursor, &isDifferentRow); + p->cacheStatus = CACHE_STALE; + if( isDifferentRow ) p->nullRow = 1; + return rc; +} + +/* +** Check to ensure that the cursor is valid. Restore the cursor +** if need be. Return any I/O error from the restore operation. +*/ +SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor *p){ + if( sqlite3BtreeCursorHasMoved(p->pCursor) ){ + return handleMovedCursor(p); + } + return SQLITE_OK; +} + +/* ** Make sure the cursor p is ready to read or write the row to which it ** was last positioned. Return an error code if an OOM fault or I/O error ** prevents us from positioning the cursor to its correct position. @@ -64062,30 +66969,11 @@ */ SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor *p){ if( p->deferredMoveto ){ - int res, rc; -#ifdef SQLITE_TEST - extern int sqlite3_search_count; -#endif - assert( p->isTable ); - rc = sqlite3BtreeMovetoUnpacked(p->pCursor, 0, p->movetoTarget, 0, &res); - if( rc ) return rc; - p->lastRowid = p->movetoTarget; - if( res!=0 ) return SQLITE_CORRUPT_BKPT; - p->rowidIsValid = 1; -#ifdef SQLITE_TEST - sqlite3_search_count++; -#endif - p->deferredMoveto = 0; - p->cacheStatus = CACHE_STALE; - }else if( p->pCursor ){ - int hasMoved; - int rc = sqlite3BtreeCursorHasMoved(p->pCursor, &hasMoved); - if( rc ) return rc; - if( hasMoved ){ - p->cacheStatus = CACHE_STALE; - p->nullRow = 1; - } + return handleDeferredMoveto(p); } + if( p->pCursor && sqlite3BtreeCursorHasMoved(p->pCursor) ){ + return handleMovedCursor(p); + } return SQLITE_OK; } @@ -64136,7 +67024,7 @@ */ SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem *pMem, int file_format){ int flags = pMem->flags; - int n; + u32 n; if( flags&MEM_Null ){ return 0; @@ -64147,9 +67035,7 @@ i64 i = pMem->u.i; u64 u; if( i<0 ){ - if( i<(-MAX_6BYTE) ) return 6; - /* Previous test prevents: u = -(-9223372036854775808) */ - u = -i; + u = ~i; }else{ u = i; } @@ -64166,11 +67052,11 @@ return 7; } assert( pMem->db->mallocFailed || flags&(MEM_Str|MEM_Blob) ); - n = pMem->n; + assert( pMem->n>=0 ); + n = (u32)pMem->n; if( flags & MEM_Zero ){ n += pMem->u.nZero; } - assert( n>=0 ); return ((n*2) + 12 + ((flags&MEM_Str)!=0)); } @@ -64260,17 +67146,18 @@ u64 v; u32 i; if( serial_type==7 ){ - assert( sizeof(v)==sizeof(pMem->r) ); - memcpy(&v, &pMem->r, sizeof(v)); + assert( sizeof(v)==sizeof(pMem->u.r) ); + memcpy(&v, &pMem->u.r, sizeof(v)); swapMixedEndianFloat(v); }else{ v = pMem->u.i; } len = i = sqlite3VdbeSerialTypeLen(serial_type); - while( i-- ){ - buf[i] = (u8)(v&0xFF); + assert( i>0 ); + do{ + buf[--i] = (u8)(v&0xFF); v >>= 8; - } + }while( i ); return len; } @@ -64294,104 +67181,134 @@ #define TWO_BYTE_INT(x) (256*(i8)((x)[0])|(x)[1]) #define THREE_BYTE_INT(x) (65536*(i8)((x)[0])|((x)[1]<<8)|(x)[2]) #define FOUR_BYTE_UINT(x) (((u32)(x)[0]<<24)|((x)[1]<<16)|((x)[2]<<8)|(x)[3]) +#define FOUR_BYTE_INT(x) (16777216*(i8)((x)[0])|((x)[1]<<16)|((x)[2]<<8)|(x)[3]) /* ** Deserialize the data blob pointed to by buf as serial type serial_type ** and store the result in pMem. Return the number of bytes read. +** +** This function is implemented as two separate routines for performance. +** The few cases that require local variables are broken out into a separate +** routine so that in most cases the overhead of moving the stack pointer +** is avoided. */ +static u32 SQLITE_NOINLINE serialGet( + const unsigned char *buf, /* Buffer to deserialize from */ + u32 serial_type, /* Serial type to deserialize */ + Mem *pMem /* Memory cell to write value into */ +){ + u64 x = FOUR_BYTE_UINT(buf); + u32 y = FOUR_BYTE_UINT(buf+4); + x = (x<<32) + y; + if( serial_type==6 ){ + /* EVIDENCE-OF: R-29851-52272 Value is a big-endian 64-bit + ** twos-complement integer. */ + pMem->u.i = *(i64*)&x; + pMem->flags = MEM_Int; + testcase( pMem->u.i<0 ); + }else{ + /* EVIDENCE-OF: R-57343-49114 Value is a big-endian IEEE 754-2008 64-bit + ** floating point number. */ +#if !defined(NDEBUG) && !defined(SQLITE_OMIT_FLOATING_POINT) + /* Verify that integers and floating point values use the same + ** byte order. Or, that if SQLITE_MIXED_ENDIAN_64BIT_FLOAT is + ** defined that 64-bit floating point values really are mixed + ** endian. + */ + static const u64 t1 = ((u64)0x3ff00000)<<32; + static const double r1 = 1.0; + u64 t2 = t1; + swapMixedEndianFloat(t2); + assert( sizeof(r1)==sizeof(t2) && memcmp(&r1, &t2, sizeof(r1))==0 ); +#endif + assert( sizeof(x)==8 && sizeof(pMem->u.r)==8 ); + swapMixedEndianFloat(x); + memcpy(&pMem->u.r, &x, sizeof(x)); + pMem->flags = sqlite3IsNaN(pMem->u.r) ? MEM_Null : MEM_Real; + } + return 8; +} SQLITE_PRIVATE u32 sqlite3VdbeSerialGet( const unsigned char *buf, /* Buffer to deserialize from */ u32 serial_type, /* Serial type to deserialize */ Mem *pMem /* Memory cell to write value into */ ){ - u64 x; - u32 y; switch( serial_type ){ case 10: /* Reserved for future use */ case 11: /* Reserved for future use */ - case 0: { /* NULL */ + case 0: { /* Null */ + /* EVIDENCE-OF: R-24078-09375 Value is a NULL. */ pMem->flags = MEM_Null; break; } - case 1: { /* 1-byte signed integer */ + case 1: { + /* EVIDENCE-OF: R-44885-25196 Value is an 8-bit twos-complement + ** integer. */ pMem->u.i = ONE_BYTE_INT(buf); pMem->flags = MEM_Int; testcase( pMem->u.i<0 ); return 1; } case 2: { /* 2-byte signed integer */ + /* EVIDENCE-OF: R-49794-35026 Value is a big-endian 16-bit + ** twos-complement integer. */ pMem->u.i = TWO_BYTE_INT(buf); pMem->flags = MEM_Int; testcase( pMem->u.i<0 ); return 2; } case 3: { /* 3-byte signed integer */ + /* EVIDENCE-OF: R-37839-54301 Value is a big-endian 24-bit + ** twos-complement integer. */ pMem->u.i = THREE_BYTE_INT(buf); pMem->flags = MEM_Int; testcase( pMem->u.i<0 ); return 3; } case 4: { /* 4-byte signed integer */ - y = FOUR_BYTE_UINT(buf); - pMem->u.i = (i64)*(int*)&y; + /* EVIDENCE-OF: R-01849-26079 Value is a big-endian 32-bit + ** twos-complement integer. */ + pMem->u.i = FOUR_BYTE_INT(buf); pMem->flags = MEM_Int; testcase( pMem->u.i<0 ); return 4; } case 5: { /* 6-byte signed integer */ + /* EVIDENCE-OF: R-50385-09674 Value is a big-endian 48-bit + ** twos-complement integer. */ pMem->u.i = FOUR_BYTE_UINT(buf+2) + (((i64)1)<<32)*TWO_BYTE_INT(buf); pMem->flags = MEM_Int; testcase( pMem->u.i<0 ); return 6; } case 6: /* 8-byte signed integer */ case 7: { /* IEEE floating point */ -#if !defined(NDEBUG) && !defined(SQLITE_OMIT_FLOATING_POINT) - /* Verify that integers and floating point values use the same - ** byte order. Or, that if SQLITE_MIXED_ENDIAN_64BIT_FLOAT is - ** defined that 64-bit floating point values really are mixed - ** endian. - */ - static const u64 t1 = ((u64)0x3ff00000)<<32; - static const double r1 = 1.0; - u64 t2 = t1; - swapMixedEndianFloat(t2); - assert( sizeof(r1)==sizeof(t2) && memcmp(&r1, &t2, sizeof(r1))==0 ); -#endif - x = FOUR_BYTE_UINT(buf); - y = FOUR_BYTE_UINT(buf+4); - x = (x<<32) | y; - if( serial_type==6 ){ - pMem->u.i = *(i64*)&x; - pMem->flags = MEM_Int; - testcase( pMem->u.i<0 ); - }else{ - assert( sizeof(x)==8 && sizeof(pMem->r)==8 ); - swapMixedEndianFloat(x); - memcpy(&pMem->r, &x, sizeof(x)); - pMem->flags = sqlite3IsNaN(pMem->r) ? MEM_Null : MEM_Real; - } - return 8; + /* These use local variables, so do them in a separate routine + ** to avoid having to move the frame pointer in the common case */ + return serialGet(buf,serial_type,pMem); } case 8: /* Integer 0 */ case 9: { /* Integer 1 */ + /* EVIDENCE-OF: R-12976-22893 Value is the integer 0. */ + /* EVIDENCE-OF: R-18143-12121 Value is the integer 1. */ pMem->u.i = serial_type-8; pMem->flags = MEM_Int; return 0; } default: { + /* EVIDENCE-OF: R-14606-31564 Value is a BLOB that is (N-12)/2 bytes in + ** length. + ** EVIDENCE-OF: R-28401-00140 Value is a string in the text encoding and + ** (N-13)/2 bytes in length. */ static const u16 aFlag[] = { MEM_Blob|MEM_Ephem, MEM_Str|MEM_Ephem }; - u32 len = (serial_type-12)/2; pMem->z = (char *)buf; - pMem->n = len; - pMem->xDel = 0; + pMem->n = (serial_type-12)/2; pMem->flags = aFlag[serial_type&1]; - return len; + return pMem->n; } } return 0; } - /* ** This routine is used to allocate sufficient space for an UnpackedRecord ** structure large enough to be used with sqlite3VdbeRecordUnpack() if @@ -64461,17 +67378,17 @@ idx = getVarint32(aKey, szHdr); d = szHdr; u = 0; - while( idxnField && d<=nKey ){ + while( idxenc = pKeyInfo->enc; pMem->db = pKeyInfo->db; /* pMem->flags = 0; // sqlite3VdbeSerialGet() will set this for us */ - pMem->zMalloc = 0; + pMem->szMalloc = 0; d += sqlite3VdbeSerialGet(&aKey[d], serial_type, pMem); pMem++; - u++; + if( (++u)>=p->nField ) break; } assert( u<=pKeyInfo->nField + 1 ); p->nField = u; @@ -64485,10 +67402,14 @@ ** sqlite3VdbeSerialGet() and sqlite3MemCompare() functions. It is used ** in assert() statements to ensure that the optimized code in ** sqlite3VdbeRecordCompare() returns results with these two primitives. +** +** Return true if the result of comparison is equivalent to desiredResult. +** Return false if there is a disagreement. */ static int vdbeRecordCompareDebug( int nKey1, const void *pKey1, /* Left key */ - const UnpackedRecord *pPKey2 /* Right key */ + const UnpackedRecord *pPKey2, /* Right key */ + int desiredResult /* Correct answer */ ){ u32 d1; /* Offset into aKey[] of next data element */ u32 idx1; /* Offset into aKey[] of next header element */ @@ -64500,10 +67421,11 @@ Mem mem1; pKeyInfo = pPKey2->pKeyInfo; + if( pKeyInfo->db==0 ) return 1; mem1.enc = pKeyInfo->enc; mem1.db = pKeyInfo->db; /* mem1.flags = 0; // Will be initialized by sqlite3VdbeSerialGet() */ - VVA_ONLY( mem1.zMalloc = 0; ) /* Only needed by assert() statements */ + VVA_ONLY( mem1.szMalloc = 0; ) /* Only needed by assert() statements */ /* Compilers may complain that mem1.u.i is potentially uninitialized. ** We could initialize it, as shown here, to silence those complaints. @@ -64546,11 +67468,11 @@ */ rc = sqlite3MemCompare(&mem1, &pPKey2->aMem[i], pKeyInfo->aColl[i]); if( rc!=0 ){ - assert( mem1.zMalloc==0 ); /* See comment below */ + assert( mem1.szMalloc==0 ); /* See comment below */ if( pKeyInfo->aSortOrder[i] ){ rc = -rc; /* Invert the result for DESC sort order. */ } - return rc; + goto debugCompareEnd; } i++; }while( idx1nField ); @@ -64559,16 +67481,59 @@ ** the following assert(). If the assert() fails, it indicates a ** memory leak and a need to call sqlite3VdbeMemRelease(&mem1). */ - assert( mem1.zMalloc==0 ); + assert( mem1.szMalloc==0 ); /* rc==0 here means that one of the keys ran out of fields and - ** all the fields up to that point were equal. Return the the default_rc + ** all the fields up to that point were equal. Return the default_rc ** value. */ - return pPKey2->default_rc; + rc = pPKey2->default_rc; + +debugCompareEnd: + if( desiredResult==0 && rc==0 ) return 1; + if( desiredResult<0 && rc<0 ) return 1; + if( desiredResult>0 && rc>0 ) return 1; + if( CORRUPT_DB ) return 1; + if( pKeyInfo->db->mallocFailed ) return 1; + return 0; } #endif +#if SQLITE_DEBUG /* +** Count the number of fields (a.k.a. columns) in the record given by +** pKey,nKey. The verify that this count is less than or equal to the +** limit given by pKeyInfo->nField + pKeyInfo->nXField. +** +** If this constraint is not satisfied, it means that the high-speed +** vdbeRecordCompareInt() and vdbeRecordCompareString() routines will +** not work correctly. If this assert() ever fires, it probably means +** that the KeyInfo.nField or KeyInfo.nXField values were computed +** incorrectly. +*/ +static void vdbeAssertFieldCountWithinLimits( + int nKey, const void *pKey, /* The record to verify */ + const KeyInfo *pKeyInfo /* Compare size with this KeyInfo */ +){ + int nField = 0; + u32 szHdr; + u32 idx; + u32 notUsed; + const unsigned char *aKey = (const unsigned char*)pKey; + + if( CORRUPT_DB ) return; + idx = getVarint32(aKey, szHdr); + assert( szHdr<=nKey ); + while( idxnField+pKeyInfo->nXField ); +} +#else +# define vdbeAssertFieldCountWithinLimits(A,B,C) +#endif + +/* ** Both *pMem1 and *pMem2 contain string values. Compare the two values ** using the collation sequence pColl. As usual, return a negative , zero ** or positive value if *pMem1 is less than, equal to or greater than @@ -64577,7 +67542,8 @@ static int vdbeCompareMemString( const Mem *pMem1, const Mem *pMem2, - const CollSeq *pColl + const CollSeq *pColl, + u8 *prcErr /* If an OOM occurs, set to SQLITE_NOMEM */ ){ if( pMem1->enc==pColl->enc ){ /* The strings are already in the correct encoding. Call the @@ -64589,8 +67555,8 @@ int n1, n2; Mem c1; Mem c2; - memset(&c1, 0, sizeof(c1)); - memset(&c2, 0, sizeof(c2)); + sqlite3VdbeMemInit(&c1, pMem1->db, MEM_Null); + sqlite3VdbeMemInit(&c2, pMem1->db, MEM_Null); sqlite3VdbeMemShallowCopy(&c1, pMem1, MEM_Ephem); sqlite3VdbeMemShallowCopy(&c2, pMem2, MEM_Ephem); v1 = sqlite3ValueText((sqlite3_value*)&c1, pColl->enc); @@ -64600,11 +67566,24 @@ rc = pColl->xCmp(pColl->pUser, n1, v1, n2, v2); sqlite3VdbeMemRelease(&c1); sqlite3VdbeMemRelease(&c2); + if( (v1==0 || v2==0) && prcErr ) *prcErr = SQLITE_NOMEM; return rc; } } /* +** Compare two blobs. Return negative, zero, or positive if the first +** is less than, equal to, or greater than the second, respectively. +** If one blob is a prefix of the other, then the shorter is the lessor. +*/ +static SQLITE_NOINLINE int sqlite3BlobCompare(const Mem *pB1, const Mem *pB2){ + int c = memcmp(pB1->z, pB2->z, pB1->n>pB2->n ? pB2->n : pB1->n); + if( c ) return c; + return pB1->n - pB2->n; +} + + +/* ** Compare the values contained by the two memory cells, returning ** negative, zero or positive if pMem1 is less than, equal to, or greater ** than pMem2. Sorting order is NULL's first, followed by numbers (integers @@ -64614,7 +67593,6 @@ ** Two NULL values are considered equal by this function. */ SQLITE_PRIVATE int sqlite3MemCompare(const Mem *pMem1, const Mem *pMem2, const CollSeq *pColl){ - int rc; int f1, f2; int combined_flags; @@ -64642,14 +67620,14 @@ return 0; } if( (f1&MEM_Real)!=0 ){ - r1 = pMem1->r; + r1 = pMem1->u.r; }else if( (f1&MEM_Int)!=0 ){ r1 = (double)pMem1->u.i; }else{ return 1; } if( (f2&MEM_Real)!=0 ){ - r2 = pMem2->r; + r2 = pMem2->u.r; }else if( (f2&MEM_Int)!=0 ){ r2 = (double)pMem2->u.i; }else{ @@ -64682,18 +67660,14 @@ assert( !pColl || pColl->xCmp ); if( pColl ){ - return vdbeCompareMemString(pMem1, pMem2, pColl); + return vdbeCompareMemString(pMem1, pMem2, pColl, 0); } /* If a NULL pointer was passed as the collate function, fall through ** to the blob case and use memcmp(). */ } /* Both values must be blobs. Compare using memcmp(). */ - rc = memcmp(pMem1->z, pMem2->z, (pMem1->n>pMem2->n)?pMem2->n:pMem1->n); - if( rc==0 ){ - rc = pMem1->n - pMem2->n; - } - return rc; + return sqlite3BlobCompare(pMem1, pMem2); } @@ -64743,7 +67717,7 @@ ** specified by {nKey1, pKey1} and pPKey2. It returns a negative, zero ** or positive integer if key1 is less than, equal to or ** greater than key2. The {nKey1, pKey1} key must be a blob -** created by th OP_MakeRecord opcode of the VDBE. The pPKey2 +** created by the OP_MakeRecord opcode of the VDBE. The pPKey2 ** key must be a parsed key such as obtained from ** sqlite3VdbeParseRecord. ** @@ -64753,10 +67727,15 @@ ** Key1 and Key2 do not have to contain the same number of fields. If all ** fields that appear in both keys are equal, then pPKey2->default_rc is ** returned. +** +** If database corruption is discovered, set pPKey2->errCode to +** SQLITE_CORRUPT and return 0. If an OOM error is encountered, +** pPKey2->errCode is set to SQLITE_NOMEM and, if it is not NULL, the +** malloc-failed flag set on database handle (pPKey2->pKeyInfo->db). */ -SQLITE_PRIVATE int sqlite3VdbeRecordCompare( +static int vdbeRecordCompareWithSkip( int nKey1, const void *pKey1, /* Left key */ - const UnpackedRecord *pPKey2, /* Right key */ + UnpackedRecord *pPKey2, /* Right key */ int bSkip /* If true, skip the first field */ ){ u32 d1; /* Offset into aKey[] of next data element */ @@ -64782,11 +67761,14 @@ }else{ idx1 = getVarint32(aKey1, szHdr1); d1 = szHdr1; - if( d1>(unsigned)nKey1 ) return 1; /* Corruption */ + if( d1>(unsigned)nKey1 ){ + pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT; + return 0; /* Corruption */ + } i = 0; } - VVA_ONLY( mem1.zMalloc = 0; ) /* Only needed by assert() statements */ + VVA_ONLY( mem1.szMalloc = 0; ) /* Only needed by assert() statements */ assert( pPKey2->pKeyInfo->nField+pPKey2->pKeyInfo->nXField>=pPKey2->nField || CORRUPT_DB ); assert( pPKey2->pKeyInfo->aSortOrder!=0 ); @@ -64806,9 +67788,9 @@ }else if( serial_type==7 ){ double rhs = (double)pRhs->u.i; sqlite3VdbeSerialGet(&aKey1[d1], serial_type, &mem1); - if( mem1.rrhs ){ + }else if( mem1.u.r>rhs ){ rc = +1; } }else{ @@ -64830,11 +67812,11 @@ }else if( serial_type==0 ){ rc = -1; }else{ - double rhs = pRhs->r; + double rhs = pRhs->u.r; double lhs; sqlite3VdbeSerialGet(&aKey1[d1], serial_type, &mem1); if( serial_type==7 ){ - lhs = mem1.r; + lhs = mem1.u.r; }else{ lhs = (double)mem1.u.i; } @@ -64859,13 +67841,16 @@ testcase( (d1+mem1.n)==(unsigned)nKey1 ); testcase( (d1+mem1.n+1)==(unsigned)nKey1 ); if( (d1+mem1.n) > (unsigned)nKey1 ){ - rc = 1; /* Corruption */ + pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT; + return 0; /* Corruption */ }else if( pKeyInfo->aColl[i] ){ mem1.enc = pKeyInfo->enc; mem1.db = pKeyInfo->db; mem1.flags = MEM_Str; mem1.z = (char*)&aKey1[d1]; - rc = vdbeCompareMemString(&mem1, pRhs, pKeyInfo->aColl[i]); + rc = vdbeCompareMemString( + &mem1, pRhs, pKeyInfo->aColl[i], &pPKey2->errCode + ); }else{ int nCmp = MIN(mem1.n, pRhs->n); rc = memcmp(&aKey1[d1], pRhs->z, nCmp); @@ -64885,7 +67870,8 @@ testcase( (d1+nStr)==(unsigned)nKey1 ); testcase( (d1+nStr+1)==(unsigned)nKey1 ); if( (d1+nStr) > (unsigned)nKey1 ){ - rc = 1; /* Corruption */ + pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT; + return 0; /* Corruption */ }else{ int nCmp = MIN(nStr, pRhs->n); rc = memcmp(&aKey1[d1], pRhs->z, nCmp); @@ -64904,12 +67890,8 @@ if( pKeyInfo->aSortOrder[i] ){ rc = -rc; } - assert( CORRUPT_DB - || (rc<0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)<0) - || (rc>0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)>0) - || pKeyInfo->db->mallocFailed - ); - assert( mem1.zMalloc==0 ); /* See comment below */ + assert( vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, rc) ); + assert( mem1.szMalloc==0 ); /* See comment below */ return rc; } @@ -64922,27 +67904,37 @@ /* No memory allocation is ever used on mem1. Prove this using ** the following assert(). If the assert() fails, it indicates a ** memory leak and a need to call sqlite3VdbeMemRelease(&mem1). */ - assert( mem1.zMalloc==0 ); + assert( mem1.szMalloc==0 ); /* rc==0 here means that one or both of the keys ran out of fields and - ** all the fields up to that point were equal. Return the the default_rc + ** all the fields up to that point were equal. Return the default_rc ** value. */ assert( CORRUPT_DB - || pPKey2->default_rc==vdbeRecordCompareDebug(nKey1, pKey1, pPKey2) + || vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, pPKey2->default_rc) + || pKeyInfo->db->mallocFailed ); return pPKey2->default_rc; } +SQLITE_PRIVATE int sqlite3VdbeRecordCompare( + int nKey1, const void *pKey1, /* Left key */ + UnpackedRecord *pPKey2 /* Right key */ +){ + return vdbeRecordCompareWithSkip(nKey1, pKey1, pPKey2, 0); +} + /* ** This function is an optimized version of sqlite3VdbeRecordCompare() ** that (a) the first field of pPKey2 is an integer, and (b) the ** size-of-header varint at the start of (pKey1/nKey1) fits in a single ** byte (i.e. is less than 128). +** +** To avoid concerns about buffer overreads, this routine is only used +** on schemas where the maximum valid header size is 63 bytes or less. */ static int vdbeRecordCompareInt( int nKey1, const void *pKey1, /* Left key */ - const UnpackedRecord *pPKey2, /* Right key */ - int bSkip /* Ignored */ + UnpackedRecord *pPKey2 /* Right key */ ){ const u8 *aKey = &((const u8*)pKey1)[*(const u8*)pKey1 & 0x3F]; int serial_type = ((const u8*)pKey1)[1]; @@ -64951,9 +67943,9 @@ u64 x; i64 v = pPKey2->aMem[0].u.i; i64 lhs; - UNUSED_PARAMETER(bSkip); - assert( bSkip==0 ); + vdbeAssertFieldCountWithinLimits(nKey1, pKey1, pPKey2->pKeyInfo); + assert( (*(u8*)pKey1)<=0x3F || CORRUPT_DB ); switch( serial_type ){ case 1: { /* 1-byte signed integer */ lhs = ONE_BYTE_INT(aKey); @@ -65002,10 +67994,10 @@ ** (as gcc is clever enough to combine the two like cases). Other ** compilers might be similar. */ case 0: case 7: - return sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2, 0); + return sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2); default: - return sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2, 0); + return sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2); } if( v>lhs ){ @@ -65015,18 +68007,14 @@ }else if( pPKey2->nField>1 ){ /* The first fields of the two keys are equal. Compare the trailing ** fields. */ - res = sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2, 1); + res = vdbeRecordCompareWithSkip(nKey1, pKey1, pPKey2, 1); }else{ /* The first fields of the two keys are equal and there are no trailing ** fields. Return pPKey2->default_rc in this case. */ res = pPKey2->default_rc; } - assert( (res==0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)==0) - || (res<0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)<0) - || (res>0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)>0) - || CORRUPT_DB - ); + assert( vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, res) ); return res; } @@ -65038,17 +68026,14 @@ */ static int vdbeRecordCompareString( int nKey1, const void *pKey1, /* Left key */ - const UnpackedRecord *pPKey2, /* Right key */ - int bSkip + UnpackedRecord *pPKey2 /* Right key */ ){ const u8 *aKey1 = (const u8*)pKey1; int serial_type; int res; - UNUSED_PARAMETER(bSkip); - assert( bSkip==0 ); + vdbeAssertFieldCountWithinLimits(nKey1, pKey1, pPKey2->pKeyInfo); getVarint32(&aKey1[1], serial_type); - if( serial_type<12 ){ res = pPKey2->r1; /* (pKey1/nKey1) is a number or a null */ }else if( !(serial_type & 0x01) ){ @@ -65059,15 +68044,18 @@ int szHdr = aKey1[0]; nStr = (serial_type-12) / 2; - if( (szHdr + nStr) > nKey1 ) return 0; /* Corruption */ + if( (szHdr + nStr) > nKey1 ){ + pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT; + return 0; /* Corruption */ + } nCmp = MIN( pPKey2->aMem[0].n, nStr ); res = memcmp(&aKey1[szHdr], pPKey2->aMem[0].z, nCmp); if( res==0 ){ res = nStr - pPKey2->aMem[0].n; if( res==0 ){ if( pPKey2->nField>1 ){ - res = sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2, 1); + res = vdbeRecordCompareWithSkip(nKey1, pKey1, pPKey2, 1); }else{ res = pPKey2->default_rc; } @@ -65083,10 +68071,9 @@ } } - assert( (res==0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)==0) - || (res<0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)<0) - || (res>0 && vdbeRecordCompareDebug(nKey1, pKey1, pPKey2)>0) + assert( vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, res) || CORRUPT_DB + || pPKey2->pKeyInfo->db->mallocFailed ); return res; } @@ -65150,8 +68137,6 @@ u32 lenRowid; /* Size of the rowid */ Mem m, v; - UNUSED_PARAMETER(db); - /* Get the size of the index entry. Only indices entries of less ** than 2GiB are support - anything large must be database corruption. ** Any corruption is detected in sqlite3BtreeParseCellPtr(), though, so @@ -65163,7 +68148,7 @@ assert( (nCellKey & SQLITE_MAX_U32)==(u64)nCellKey ); /* Read in the complete content of the index entry */ - memset(&m, 0, sizeof(m)); + sqlite3VdbeMemInit(&m, db, 0); rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, 1, &m); if( rc ){ return rc; @@ -65206,7 +68191,7 @@ /* Jump here if database corruption is detected after m has been ** allocated. Free the m object and return SQLITE_CORRUPT. */ idx_rowid_corruption: - testcase( m.zMalloc!=0 ); + testcase( m.szMalloc!=0 ); sqlite3VdbeMemRelease(&m); return SQLITE_CORRUPT_BKPT; } @@ -65223,8 +68208,9 @@ ** of the keys prior to the final rowid, not the entire key. */ SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare( + sqlite3 *db, /* Database connection */ VdbeCursor *pC, /* The cursor to compare against */ - const UnpackedRecord *pUnpacked, /* Unpacked version of key */ + UnpackedRecord *pUnpacked, /* Unpacked version of key */ int *res /* Write the comparison result here */ ){ i64 nCellKey = 0; @@ -65241,12 +68227,12 @@ *res = 0; return SQLITE_CORRUPT_BKPT; } - memset(&m, 0, sizeof(m)); + sqlite3VdbeMemInit(&m, db, 0); rc = sqlite3VdbeMemFromBtree(pC->pCursor, 0, (u32)nCellKey, 1, &m); if( rc ){ return rc; } - *res = sqlite3VdbeRecordCompare(m.n, m.z, pUnpacked, 0); + *res = sqlite3VdbeRecordCompare(m.n, m.z, pUnpacked); sqlite3VdbeMemRelease(&m); return SQLITE_OK; } @@ -65560,9 +68546,12 @@ ** The following routines are used by user-defined functions to specify ** the function result. ** -** The setStrOrError() funtion calls sqlite3VdbeMemSetStr() to store the +** The setStrOrError() function calls sqlite3VdbeMemSetStr() to store the ** result as a string or blob but if the string or blob is too large, it ** then sets the error code to SQLITE_TOOBIG +** +** The invokeValueDestructor(P,X) routine invokes destructor function X() +** on value P is not going to be used and need to be destroyed. */ static void setResultStrOrError( sqlite3_context *pCtx, /* Function context */ @@ -65571,67 +68560,113 @@ u8 enc, /* Encoding of z. 0 for BLOBs */ void (*xDel)(void*) /* Destructor function */ ){ - if( sqlite3VdbeMemSetStr(&pCtx->s, z, n, enc, xDel)==SQLITE_TOOBIG ){ + if( sqlite3VdbeMemSetStr(pCtx->pOut, z, n, enc, xDel)==SQLITE_TOOBIG ){ sqlite3_result_error_toobig(pCtx); } } +static int invokeValueDestructor( + const void *p, /* Value to destroy */ + void (*xDel)(void*), /* The destructor */ + sqlite3_context *pCtx /* Set a SQLITE_TOOBIG error if no NULL */ +){ + assert( xDel!=SQLITE_DYNAMIC ); + if( xDel==0 ){ + /* noop */ + }else if( xDel==SQLITE_TRANSIENT ){ + /* noop */ + }else{ + xDel((void*)p); + } + if( pCtx ) sqlite3_result_error_toobig(pCtx); + return SQLITE_TOOBIG; +} SQLITE_API void sqlite3_result_blob( sqlite3_context *pCtx, const void *z, int n, void (*xDel)(void *) ){ assert( n>=0 ); - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); setResultStrOrError(pCtx, z, n, 0, xDel); } +SQLITE_API void sqlite3_result_blob64( + sqlite3_context *pCtx, + const void *z, + sqlite3_uint64 n, + void (*xDel)(void *) +){ + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + assert( xDel!=SQLITE_DYNAMIC ); + if( n>0x7fffffff ){ + (void)invokeValueDestructor(z, xDel, pCtx); + }else{ + setResultStrOrError(pCtx, z, (int)n, 0, xDel); + } +} SQLITE_API void sqlite3_result_double(sqlite3_context *pCtx, double rVal){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemSetDouble(&pCtx->s, rVal); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemSetDouble(pCtx->pOut, rVal); } SQLITE_API void sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_ERROR; pCtx->fErrorOrAux = 1; - sqlite3VdbeMemSetStr(&pCtx->s, z, n, SQLITE_UTF8, SQLITE_TRANSIENT); + sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF8, SQLITE_TRANSIENT); } #ifndef SQLITE_OMIT_UTF16 SQLITE_API void sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_ERROR; pCtx->fErrorOrAux = 1; - sqlite3VdbeMemSetStr(&pCtx->s, z, n, SQLITE_UTF16NATIVE, SQLITE_TRANSIENT); + sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF16NATIVE, SQLITE_TRANSIENT); } #endif SQLITE_API void sqlite3_result_int(sqlite3_context *pCtx, int iVal){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemSetInt64(&pCtx->s, (i64)iVal); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemSetInt64(pCtx->pOut, (i64)iVal); } SQLITE_API void sqlite3_result_int64(sqlite3_context *pCtx, i64 iVal){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemSetInt64(&pCtx->s, iVal); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemSetInt64(pCtx->pOut, iVal); } SQLITE_API void sqlite3_result_null(sqlite3_context *pCtx){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemSetNull(&pCtx->s); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemSetNull(pCtx->pOut); } SQLITE_API void sqlite3_result_text( sqlite3_context *pCtx, const char *z, int n, void (*xDel)(void *) ){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); setResultStrOrError(pCtx, z, n, SQLITE_UTF8, xDel); } +SQLITE_API void sqlite3_result_text64( + sqlite3_context *pCtx, + const char *z, + sqlite3_uint64 n, + void (*xDel)(void *), + unsigned char enc +){ + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + assert( xDel!=SQLITE_DYNAMIC ); + if( enc==SQLITE_UTF16 ) enc = SQLITE_UTF16NATIVE; + if( n>0x7fffffff ){ + (void)invokeValueDestructor(z, xDel, pCtx); + }else{ + setResultStrOrError(pCtx, z, (int)n, enc, xDel); + } +} #ifndef SQLITE_OMIT_UTF16 SQLITE_API void sqlite3_result_text16( sqlite3_context *pCtx, const void *z, int n, void (*xDel)(void *) ){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); setResultStrOrError(pCtx, z, n, SQLITE_UTF16NATIVE, xDel); } SQLITE_API void sqlite3_result_text16be( @@ -65640,7 +68675,7 @@ int n, void (*xDel)(void *) ){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); setResultStrOrError(pCtx, z, n, SQLITE_UTF16BE, xDel); } SQLITE_API void sqlite3_result_text16le( @@ -65649,43 +68684,43 @@ int n, void (*xDel)(void *) ){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); setResultStrOrError(pCtx, z, n, SQLITE_UTF16LE, xDel); } #endif /* SQLITE_OMIT_UTF16 */ SQLITE_API void sqlite3_result_value(sqlite3_context *pCtx, sqlite3_value *pValue){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemCopy(&pCtx->s, pValue); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemCopy(pCtx->pOut, pValue); } SQLITE_API void sqlite3_result_zeroblob(sqlite3_context *pCtx, int n){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemSetZeroBlob(&pCtx->s, n); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemSetZeroBlob(pCtx->pOut, n); } SQLITE_API void sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){ pCtx->isError = errCode; pCtx->fErrorOrAux = 1; - if( pCtx->s.flags & MEM_Null ){ - sqlite3VdbeMemSetStr(&pCtx->s, sqlite3ErrStr(errCode), -1, + if( pCtx->pOut->flags & MEM_Null ){ + sqlite3VdbeMemSetStr(pCtx->pOut, sqlite3ErrStr(errCode), -1, SQLITE_UTF8, SQLITE_STATIC); } } /* Force an SQLITE_TOOBIG error. */ SQLITE_API void sqlite3_result_error_toobig(sqlite3_context *pCtx){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_TOOBIG; pCtx->fErrorOrAux = 1; - sqlite3VdbeMemSetStr(&pCtx->s, "string or blob too big", -1, + sqlite3VdbeMemSetStr(pCtx->pOut, "string or blob too big", -1, SQLITE_UTF8, SQLITE_STATIC); } /* An SQLITE_NOMEM error. */ SQLITE_API void sqlite3_result_error_nomem(sqlite3_context *pCtx){ - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); - sqlite3VdbeMemSetNull(&pCtx->s); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); + sqlite3VdbeMemSetNull(pCtx->pOut); pCtx->isError = SQLITE_NOMEM; pCtx->fErrorOrAux = 1; - pCtx->s.db->mallocFailed = 1; + pCtx->pOut->db->mallocFailed = 1; } /* @@ -65699,7 +68734,10 @@ for(i=0; inDb; i++){ Btree *pBt = db->aDb[i].pBt; if( pBt ){ - int nEntry = sqlite3PagerWalCallback(sqlite3BtreePager(pBt)); + int nEntry; + sqlite3BtreeEnter(pBt); + nEntry = sqlite3PagerWalCallback(sqlite3BtreePager(pBt)); + sqlite3BtreeLeave(pBt); if( db->xWalCallback && nEntry>0 && rc==SQLITE_OK ){ rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zName, nEntry); } @@ -65861,10 +68899,12 @@ sqlite3_mutex_enter(db->mutex); v->doingRerun = 0; while( (rc = sqlite3Step(v))==SQLITE_SCHEMA - && cnt++ < SQLITE_MAX_SCHEMA_RETRY - && (rc2 = rc = sqlite3Reprepare(v))==SQLITE_OK ){ + && cnt++ < SQLITE_MAX_SCHEMA_RETRY ){ + int savedPc = v->pc; + rc2 = rc = sqlite3Reprepare(v); + if( rc!=SQLITE_OK) break; sqlite3_reset(pStmt); - v->doingRerun = 1; + if( savedPc>=0 ) v->doingRerun = 1; assert( v->expired==0 ); } if( rc2!=SQLITE_OK ){ @@ -65877,7 +68917,6 @@ ** sqlite3_errmsg() and sqlite3_errcode(). */ const char *zErr = (const char *)sqlite3_value_text(db->pErr); - assert( zErr!=0 || db->mallocFailed ); sqlite3DbFree(db, v->zErrMsg); if( !db->mallocFailed ){ v->zErrMsg = sqlite3DbStrDup(db, zErr); @@ -65914,7 +68953,7 @@ */ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context *p){ assert( p && p->pFunc ); - return p->s.db; + return p->pOut->db; } /* @@ -65924,7 +68963,7 @@ Vdbe *v = p->pVdbe; int rc; if( v->iCurrentTime==0 ){ - rc = sqlite3OsCurrentTimeInt64(p->s.db->pVfs, &v->iCurrentTime); + rc = sqlite3OsCurrentTimeInt64(p->pOut->db->pVfs, &v->iCurrentTime); if( rc ) v->iCurrentTime = 0; } return v->iCurrentTime; @@ -65953,41 +68992,50 @@ } /* +** Create a new aggregate context for p and return a pointer to +** its pMem->z element. +*/ +static SQLITE_NOINLINE void *createAggContext(sqlite3_context *p, int nByte){ + Mem *pMem = p->pMem; + assert( (pMem->flags & MEM_Agg)==0 ); + if( nByte<=0 ){ + sqlite3VdbeMemSetNull(pMem); + pMem->z = 0; + }else{ + sqlite3VdbeMemClearAndResize(pMem, nByte); + pMem->flags = MEM_Agg; + pMem->u.pDef = p->pFunc; + if( pMem->z ){ + memset(pMem->z, 0, nByte); + } + } + return (void*)pMem->z; +} + +/* ** Allocate or return the aggregate context for a user function. A new ** context is allocated on the first call. Subsequent calls return the ** same context that was returned on prior calls. */ SQLITE_API void *sqlite3_aggregate_context(sqlite3_context *p, int nByte){ - Mem *pMem; assert( p && p->pFunc && p->pFunc->xStep ); - assert( sqlite3_mutex_held(p->s.db->mutex) ); - pMem = p->pMem; + assert( sqlite3_mutex_held(p->pOut->db->mutex) ); testcase( nByte<0 ); - if( (pMem->flags & MEM_Agg)==0 ){ - if( nByte<=0 ){ - sqlite3VdbeMemReleaseExternal(pMem); - pMem->flags = MEM_Null; - pMem->z = 0; - }else{ - sqlite3VdbeMemGrow(pMem, nByte, 0); - pMem->flags = MEM_Agg; - pMem->u.pDef = p->pFunc; - if( pMem->z ){ - memset(pMem->z, 0, nByte); - } - } + if( (p->pMem->flags & MEM_Agg)==0 ){ + return createAggContext(p, nByte); + }else{ + return (void*)p->pMem->z; } - return (void*)pMem->z; } /* -** Return the auxilary data pointer, if any, for the iArg'th argument to +** Return the auxiliary data pointer, if any, for the iArg'th argument to ** the user-function defined by pCtx. */ SQLITE_API void *sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){ AuxData *pAuxData; - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); for(pAuxData=pCtx->pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNext){ if( pAuxData->iOp==pCtx->iOp && pAuxData->iArg==iArg ) break; } @@ -65996,7 +69044,7 @@ } /* -** Set the auxilary data pointer and delete function, for the iArg'th +** Set the auxiliary data pointer and delete function, for the iArg'th ** argument to the user-function defined by pCtx. Any previous value is ** deleted by calling the delete function specified when it was set. */ @@ -66009,7 +69057,7 @@ AuxData *pAuxData; Vdbe *pVdbe = pCtx->pVdbe; - assert( sqlite3_mutex_held(pCtx->s.db->mutex) ); + assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); if( iArg<0 ) goto failed; for(pAuxData=pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNext){ @@ -66042,7 +69090,7 @@ #ifndef SQLITE_OMIT_DEPRECATED /* -** Return the number of times the Step function of a aggregate has been +** Return the number of times the Step function of an aggregate has been ** called. ** ** This function is deprecated. Do not use it for new code. It is @@ -66091,11 +69139,22 @@ #if defined(SQLITE_DEBUG) && defined(__GNUC__) __attribute__((aligned(8))) #endif - = {0, "", (double)0, {0}, 0, MEM_Null, 0, + = { + /* .u = */ {0}, + /* .flags = */ MEM_Null, + /* .enc = */ 0, + /* .n = */ 0, + /* .z = */ 0, + /* .zMalloc = */ 0, + /* .szMalloc = */ 0, + /* .iPadding1 = */ 0, + /* .db = */ 0, + /* .xDel = */ 0, #ifdef SQLITE_DEBUG - 0, 0, /* pScopyFrom, pFiller */ + /* .pScopyFrom = */ 0, + /* .pFiller = */ 0, #endif - 0, 0 }; + }; return &nullMem; } @@ -66116,7 +69175,7 @@ }else{ if( pVm && ALWAYS(pVm->db) ){ sqlite3_mutex_enter(pVm->db->mutex); - sqlite3Error(pVm->db, SQLITE_RANGE, 0); + sqlite3Error(pVm->db, SQLITE_RANGE); } pOut = (Mem*)columnNullValue(); } @@ -66243,11 +69302,19 @@ const void *(*xFunc)(Mem*), int useType ){ - const void *ret = 0; - Vdbe *p = (Vdbe *)pStmt; + const void *ret; + Vdbe *p; int n; - sqlite3 *db = p->db; - + sqlite3 *db; +#ifdef SQLITE_ENABLE_API_ARMOR + if( pStmt==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + ret = 0; + p = (Vdbe *)pStmt; + db = p->db; assert( db!=0 ); n = sqlite3_column_count(pStmt); if( N=0 ){ @@ -66312,7 +69379,7 @@ /* ** Return the name of the database from which a result column derives. ** NULL is returned if the result column is an expression or constant or -** anything else which is not an unabiguous reference to a database column. +** anything else which is not an unambiguous reference to a database column. */ SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt *pStmt, int N){ return columnName( @@ -66328,7 +69395,7 @@ /* ** Return the name of the table from which a result column derives. ** NULL is returned if the result column is an expression or constant or -** anything else which is not an unabiguous reference to a database column. +** anything else which is not an unambiguous reference to a database column. */ SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt *pStmt, int N){ return columnName( @@ -66344,7 +69411,7 @@ /* ** Return the name of the table column from which a result column derives. ** NULL is returned if the result column is an expression or constant or -** anything else which is not an unabiguous reference to a database column. +** anything else which is not an unambiguous reference to a database column. */ SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt *pStmt, int N){ return columnName( @@ -66381,22 +69448,22 @@ } sqlite3_mutex_enter(p->db->mutex); if( p->magic!=VDBE_MAGIC_RUN || p->pc>=0 ){ - sqlite3Error(p->db, SQLITE_MISUSE, 0); + sqlite3Error(p->db, SQLITE_MISUSE); sqlite3_mutex_leave(p->db->mutex); sqlite3_log(SQLITE_MISUSE, "bind on a busy prepared statement: [%s]", p->zSql); return SQLITE_MISUSE_BKPT; } if( i<1 || i>p->nVar ){ - sqlite3Error(p->db, SQLITE_RANGE, 0); + sqlite3Error(p->db, SQLITE_RANGE); sqlite3_mutex_leave(p->db->mutex); return SQLITE_RANGE; } i--; pVar = &p->aVar[i]; sqlite3VdbeMemRelease(pVar); pVar->flags = MEM_Null; - sqlite3Error(p->db, SQLITE_OK, 0); + sqlite3Error(p->db, SQLITE_OK); /* If the bit corresponding to this variable in Vdbe.expmask is set, then ** binding a new value to this variable invalidates the current query plan. @@ -66438,7 +69505,7 @@ if( rc==SQLITE_OK && encoding!=0 ){ rc = sqlite3VdbeChangeEncoding(pVar, ENC(p->db)); } - sqlite3Error(p->db, rc, 0); + sqlite3Error(p->db, rc); rc = sqlite3ApiExit(p->db, rc); } sqlite3_mutex_leave(p->db->mutex); @@ -66461,6 +69528,20 @@ ){ return bindText(pStmt, i, zData, nData, xDel, 0); } +SQLITE_API int sqlite3_bind_blob64( + sqlite3_stmt *pStmt, + int i, + const void *zData, + sqlite3_uint64 nData, + void (*xDel)(void*) +){ + assert( xDel!=SQLITE_DYNAMIC ); + if( nData>0x7fffffff ){ + return invokeValueDestructor(zData, xDel, 0); + }else{ + return bindText(pStmt, i, zData, (int)nData, xDel, 0); + } +} SQLITE_API int sqlite3_bind_double(sqlite3_stmt *pStmt, int i, double rValue){ int rc; Vdbe *p = (Vdbe *)pStmt; @@ -66502,6 +69583,22 @@ ){ return bindText(pStmt, i, zData, nData, xDel, SQLITE_UTF8); } +SQLITE_API int sqlite3_bind_text64( + sqlite3_stmt *pStmt, + int i, + const char *zData, + sqlite3_uint64 nData, + void (*xDel)(void*), + unsigned char enc +){ + assert( xDel!=SQLITE_DYNAMIC ); + if( nData>0x7fffffff ){ + return invokeValueDestructor(zData, xDel, 0); + }else{ + if( enc==SQLITE_UTF16 ) enc = SQLITE_UTF16NATIVE; + return bindText(pStmt, i, zData, (int)nData, xDel, enc); + } +} #ifndef SQLITE_OMIT_UTF16 SQLITE_API int sqlite3_bind_text16( sqlite3_stmt *pStmt, @@ -66521,7 +69618,7 @@ break; } case SQLITE_FLOAT: { - rc = sqlite3_bind_double(pStmt, i, pValue->r); + rc = sqlite3_bind_double(pStmt, i, pValue->u.r); break; } case SQLITE_BLOB: { @@ -66624,7 +69721,7 @@ ** Deprecated external interface. Internal/core SQLite code ** should call sqlite3TransferBindings. ** -** Is is misuse to call this routine with statements from different +** It is misuse to call this routine with statements from different ** database connections. But as this is a deprecated interface, we ** will not bother to check for that condition. ** @@ -66671,7 +69768,7 @@ */ SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt *pStmt){ Vdbe *v = (Vdbe*)pStmt; - return v!=0 && v->pc>0 && v->magic==VDBE_MAGIC_RUN; + return v!=0 && v->pc>=0 && v->magic==VDBE_MAGIC_RUN; } /* @@ -66682,6 +69779,12 @@ */ SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt){ sqlite3_stmt *pNext; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(pDb) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(pDb->mutex); if( pStmt==0 ){ pNext = (sqlite3_stmt*)pDb->pVdbe; @@ -66697,11 +69800,87 @@ */ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt *pStmt, int op, int resetFlag){ Vdbe *pVdbe = (Vdbe*)pStmt; - u32 v = pVdbe->aCounter[op]; + u32 v; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !pStmt ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + v = pVdbe->aCounter[op]; if( resetFlag ) pVdbe->aCounter[op] = 0; return (int)v; } +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS +/* +** Return status data for a single loop within query pStmt. +*/ +SQLITE_API int sqlite3_stmt_scanstatus( + sqlite3_stmt *pStmt, /* Prepared statement being queried */ + int idx, /* Index of loop to report on */ + int iScanStatusOp, /* Which metric to return */ + void *pOut /* OUT: Write the answer here */ +){ + Vdbe *p = (Vdbe*)pStmt; + ScanStatus *pScan; + if( idx<0 || idx>=p->nScan ) return 1; + pScan = &p->aScan[idx]; + switch( iScanStatusOp ){ + case SQLITE_SCANSTAT_NLOOP: { + *(sqlite3_int64*)pOut = p->anExec[pScan->addrLoop]; + break; + } + case SQLITE_SCANSTAT_NVISIT: { + *(sqlite3_int64*)pOut = p->anExec[pScan->addrVisit]; + break; + } + case SQLITE_SCANSTAT_EST: { + double r = 1.0; + LogEst x = pScan->nEst; + while( x<100 ){ + x += 10; + r *= 0.5; + } + *(double*)pOut = r*sqlite3LogEstToInt(x); + break; + } + case SQLITE_SCANSTAT_NAME: { + *(const char**)pOut = pScan->zName; + break; + } + case SQLITE_SCANSTAT_EXPLAIN: { + if( pScan->addrExplain ){ + *(const char**)pOut = p->aOp[ pScan->addrExplain ].p4.z; + }else{ + *(const char**)pOut = 0; + } + break; + } + case SQLITE_SCANSTAT_SELECTID: { + if( pScan->addrExplain ){ + *(int*)pOut = p->aOp[ pScan->addrExplain ].p1; + }else{ + *(int*)pOut = -1; + } + break; + } + default: { + return 1; + } + } + return 0; +} + +/* +** Zero all counters associated with the sqlite3_stmt_scanstatus() data. +*/ +SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt *pStmt){ + Vdbe *p = (Vdbe*)pStmt; + memset(p->anExec, 0, p->nOp * sizeof(i64)); +} +#endif /* SQLITE_ENABLE_STMT_SCANSTATUS */ + /************** End of vdbeapi.c *********************************************/ /************** Begin file vdbetrace.c ***************************************/ /* @@ -66768,7 +69947,7 @@ ** ALGORITHM: Scan the input string looking for host parameters in any of ** these forms: ?, ?N, $A, @A, :A. Take care to avoid text within ** string literals, quoted identifier names, and comments. For text forms, -** the host parameter index is found by scanning the perpared +** the host parameter index is found by scanning the prepared ** statement for the corresponding OP_Variable opcode. Once the host ** parameter index is known, locate the value in p->aVar[]. Then render ** the value as a literal in place of the host parameter name. @@ -66831,7 +70010,7 @@ }else if( pVar->flags & MEM_Int ){ sqlite3XPrintf(&out, 0, "%lld", pVar->u.i); }else if( pVar->flags & MEM_Real ){ - sqlite3XPrintf(&out, 0, "%!.15g", pVar->r); + sqlite3XPrintf(&out, 0, "%!.15g", pVar->u.r); }else if( pVar->flags & MEM_Str ){ int nOut; /* Number of bytes of the string text to include in output */ #ifndef SQLITE_OMIT_UTF16 @@ -66888,121 +70067,6 @@ #endif /* #ifndef SQLITE_OMIT_TRACE */ -/***************************************************************************** -** The following code implements the data-structure explaining logic -** for the Vdbe. -*/ - -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) - -/* -** Allocate a new Explain object -*/ -SQLITE_PRIVATE void sqlite3ExplainBegin(Vdbe *pVdbe){ - if( pVdbe ){ - Explain *p; - sqlite3BeginBenignMalloc(); - p = (Explain *)sqlite3MallocZero( sizeof(Explain) ); - if( p ){ - p->pVdbe = pVdbe; - sqlite3_free(pVdbe->pExplain); - pVdbe->pExplain = p; - sqlite3StrAccumInit(&p->str, p->zBase, sizeof(p->zBase), - SQLITE_MAX_LENGTH); - p->str.useMalloc = 2; - }else{ - sqlite3EndBenignMalloc(); - } - } -} - -/* -** Return true if the Explain ends with a new-line. -*/ -static int endsWithNL(Explain *p){ - return p && p->str.zText && p->str.nChar - && p->str.zText[p->str.nChar-1]=='\n'; -} - -/* -** Append text to the indentation -*/ -SQLITE_PRIVATE void sqlite3ExplainPrintf(Vdbe *pVdbe, const char *zFormat, ...){ - Explain *p; - if( pVdbe && (p = pVdbe->pExplain)!=0 ){ - va_list ap; - if( p->nIndent && endsWithNL(p) ){ - int n = p->nIndent; - if( n>ArraySize(p->aIndent) ) n = ArraySize(p->aIndent); - sqlite3AppendSpace(&p->str, p->aIndent[n-1]); - } - va_start(ap, zFormat); - sqlite3VXPrintf(&p->str, SQLITE_PRINTF_INTERNAL, zFormat, ap); - va_end(ap); - } -} - -/* -** Append a '\n' if there is not already one. -*/ -SQLITE_PRIVATE void sqlite3ExplainNL(Vdbe *pVdbe){ - Explain *p; - if( pVdbe && (p = pVdbe->pExplain)!=0 && !endsWithNL(p) ){ - sqlite3StrAccumAppend(&p->str, "\n", 1); - } -} - -/* -** Push a new indentation level. Subsequent lines will be indented -** so that they begin at the current cursor position. -*/ -SQLITE_PRIVATE void sqlite3ExplainPush(Vdbe *pVdbe){ - Explain *p; - if( pVdbe && (p = pVdbe->pExplain)!=0 ){ - if( p->str.zText && p->nIndentaIndent) ){ - const char *z = p->str.zText; - int i = p->str.nChar-1; - int x; - while( i>=0 && z[i]!='\n' ){ i--; } - x = (p->str.nChar - 1) - i; - if( p->nIndent && xaIndent[p->nIndent-1] ){ - x = p->aIndent[p->nIndent-1]; - } - p->aIndent[p->nIndent] = x; - } - p->nIndent++; - } -} - -/* -** Pop the indentation stack by one level. -*/ -SQLITE_PRIVATE void sqlite3ExplainPop(Vdbe *p){ - if( p && p->pExplain ) p->pExplain->nIndent--; -} - -/* -** Free the indentation structure -*/ -SQLITE_PRIVATE void sqlite3ExplainFinish(Vdbe *pVdbe){ - if( pVdbe && pVdbe->pExplain ){ - sqlite3_free(pVdbe->zExplain); - sqlite3ExplainNL(pVdbe); - pVdbe->zExplain = sqlite3StrAccumFinish(&pVdbe->pExplain->str); - sqlite3_free(pVdbe->pExplain); - pVdbe->pExplain = 0; - sqlite3EndBenignMalloc(); - } -} - -/* -** Return the explanation of a virtual machine. -*/ -SQLITE_PRIVATE const char *sqlite3VdbeExplanation(Vdbe *pVdbe){ - return (pVdbe && pVdbe->zExplain) ? pVdbe->zExplain : 0; -} -#endif /* defined(SQLITE_DEBUG) */ - /************** End of vdbetrace.c *******************************************/ /************** Begin file vdbe.c ********************************************/ /* @@ -67121,6 +70185,12 @@ ** branch can go. It is usually 2. "I" is the direction the branch ** goes. 0 means falls through. 1 means branch is taken. 2 means the ** second alternative branch is taken. +** +** iSrcLine is the source code line (from the __LINE__ macro) that +** generated the VDBE instruction. This instrumentation assumes that all +** source code is in a single file (the amalgamation). Special values 1 +** and 2 for the iSrcLine parameter mean that this particular branch is +** always taken or never taken, respectively. */ #if !defined(SQLITE_VDBE_COVERAGE) # define VdbeBranchTaken(I,M) @@ -67145,7 +70215,7 @@ ** already. Return non-zero if a malloc() fails. */ #define Stringify(P, enc) \ - if(((P)->flags&(MEM_Str|MEM_Blob))==0 && sqlite3VdbeMemStringify(P,enc)) \ + if(((P)->flags&(MEM_Str|MEM_Blob))==0 && sqlite3VdbeMemStringify(P,enc,0)) \ { goto no_mem; } /* @@ -67208,11 +70278,12 @@ sqlite3VdbeFreeCursor(p, p->apCsr[iCur]); p->apCsr[iCur] = 0; } - if( SQLITE_OK==sqlite3VdbeMemGrow(pMem, nByte, 0) ){ + if( SQLITE_OK==sqlite3VdbeMemClearAndResize(pMem, nByte) ){ p->apCsr[iCur] = pCx = (VdbeCursor*)pMem->z; memset(pCx, 0, sizeof(VdbeCursor)); pCx->iDb = iDb; pCx->nField = nField; + pCx->aOffset = &pCx->aType[nField]; if( isBtreeCursor ){ pCx->pCursor = (BtCursor*) &pMem->z[ROUND8(sizeof(VdbeCursor))+2*sizeof(u32)*nField]; @@ -67227,21 +70298,29 @@ ** do so without loss of information. In other words, if the string ** looks like a number, convert it into a number. If it does not ** look like a number, leave it alone. +** +** If the bTryForInt flag is true, then extra effort is made to give +** an integer representation. Strings that look like floating point +** values but which have no fractional component (example: '48.00') +** will have a MEM_Int representation when bTryForInt is true. +** +** If bTryForInt is false, then if the input string contains a decimal +** point or exponential notation, the result is only MEM_Real, even +** if there is an exact integer representation of the quantity. */ -static void applyNumericAffinity(Mem *pRec){ - if( (pRec->flags & (MEM_Real|MEM_Int))==0 ){ - double rValue; - i64 iValue; - u8 enc = pRec->enc; - if( (pRec->flags&MEM_Str)==0 ) return; - if( sqlite3AtoF(pRec->z, &rValue, pRec->n, enc)==0 ) return; - if( 0==sqlite3Atoi64(pRec->z, &iValue, pRec->n, enc) ){ - pRec->u.i = iValue; - pRec->flags |= MEM_Int; - }else{ - pRec->r = rValue; - pRec->flags |= MEM_Real; - } +static void applyNumericAffinity(Mem *pRec, int bTryForInt){ + double rValue; + i64 iValue; + u8 enc = pRec->enc; + assert( (pRec->flags & (MEM_Str|MEM_Int|MEM_Real))==MEM_Str ); + if( sqlite3AtoF(pRec->z, &rValue, pRec->n, enc)==0 ) return; + if( 0==sqlite3Atoi64(pRec->z, &iValue, pRec->n, enc) ){ + pRec->u.i = iValue; + pRec->flags |= MEM_Int; + }else{ + pRec->u.r = rValue; + pRec->flags |= MEM_Real; + if( bTryForInt ) sqlite3VdbeIntegerAffinity(pRec); } } @@ -67268,22 +70347,24 @@ char affinity, /* The affinity to be applied */ u8 enc /* Use this text encoding */ ){ - if( affinity==SQLITE_AFF_TEXT ){ + if( affinity>=SQLITE_AFF_NUMERIC ){ + assert( affinity==SQLITE_AFF_INTEGER || affinity==SQLITE_AFF_REAL + || affinity==SQLITE_AFF_NUMERIC ); + if( (pRec->flags & MEM_Int)==0 ){ + if( (pRec->flags & MEM_Real)==0 ){ + if( pRec->flags & MEM_Str ) applyNumericAffinity(pRec,1); + }else{ + sqlite3VdbeIntegerAffinity(pRec); + } + } + }else if( affinity==SQLITE_AFF_TEXT ){ /* Only attempt the conversion to TEXT if there is an integer or real ** representation (blob and NULL do not get converted) but no string ** representation. */ if( 0==(pRec->flags&MEM_Str) && (pRec->flags&(MEM_Real|MEM_Int)) ){ - sqlite3VdbeMemStringify(pRec, enc); + sqlite3VdbeMemStringify(pRec, enc, 1); } - pRec->flags &= ~(MEM_Real|MEM_Int); - }else if( affinity!=SQLITE_AFF_NONE ){ - assert( affinity==SQLITE_AFF_INTEGER || affinity==SQLITE_AFF_REAL - || affinity==SQLITE_AFF_NUMERIC ); - applyNumericAffinity(pRec); - if( pRec->flags & MEM_Real ){ - sqlite3VdbeIntegerAffinity(pRec); - } } } @@ -67297,7 +70378,7 @@ int eType = sqlite3_value_type(pVal); if( eType==SQLITE_TEXT ){ Mem *pMem = (Mem*)pVal; - applyNumericAffinity(pMem); + applyNumericAffinity(pMem, 0); eType = sqlite3_value_type(pVal); } return eType; @@ -67315,6 +70396,41 @@ applyAffinity((Mem *)pVal, affinity, enc); } +/* +** pMem currently only holds a string type (or maybe a BLOB that we can +** interpret as a string if we want to). Compute its corresponding +** numeric type, if has one. Set the pMem->u.r and pMem->u.i fields +** accordingly. +*/ +static u16 SQLITE_NOINLINE computeNumericType(Mem *pMem){ + assert( (pMem->flags & (MEM_Int|MEM_Real))==0 ); + assert( (pMem->flags & (MEM_Str|MEM_Blob))!=0 ); + if( sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc)==0 ){ + return 0; + } + if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==SQLITE_OK ){ + return MEM_Int; + } + return MEM_Real; +} + +/* +** Return the numeric type for pMem, either MEM_Int or MEM_Real or both or +** none. +** +** Unlike applyNumericAffinity(), this routine does not modify pMem->flags. +** But it does set pMem->u.r and pMem->u.i appropriately. +*/ +static u16 numericType(Mem *pMem){ + if( pMem->flags & (MEM_Int|MEM_Real) ){ + return pMem->flags & (MEM_Int|MEM_Real); + } + if( pMem->flags & (MEM_Str|MEM_Blob) ){ + return computeNumericType(pMem); + } + return 0; +} + #ifdef SQLITE_DEBUG /* ** Write a nice string representation of the contents of cell pMem @@ -67413,7 +70529,7 @@ printf(" i:%lld", p->u.i); #ifndef SQLITE_OMIT_FLOATING_POINT }else if( p->flags & MEM_Real ){ - printf(" r:%g", p->r); + printf(" r:%g", p->u.r); #endif }else if( p->flags & MEM_RowSet ){ printf(" (rowset)"); @@ -67650,6 +70766,9 @@ #endif nVmStep++; pOp = &aOp[pc]; +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + if( p->anExec ) p->anExec[pc]++; +#endif /* Only allow tracing if SQLITE_DEBUG is defined. */ @@ -67683,7 +70802,7 @@ assert( pOp->p2<=(p->nMem-p->nCursor) ); pOut = &aMem[pOp->p2]; memAboutToChange(p, pOut); - VdbeMemRelease(pOut); + if( VdbeMemDynamic(pOut) ) sqlite3VdbeMemSetNull(pOut); pOut->flags = MEM_Int; } @@ -67838,12 +70957,14 @@ /* Opcode: InitCoroutine P1 P2 P3 * * ** -** Set up register P1 so that it will OP_Yield to the co-routine +** Set up register P1 so that it will Yield to the coroutine ** located at address P3. ** -** If P2!=0 then the co-routine implementation immediately follows -** this opcode. So jump over the co-routine implementation to +** If P2!=0 then the coroutine implementation immediately follows +** this opcode. So jump over the coroutine implementation to ** address P2. +** +** See also: EndCoroutine */ case OP_InitCoroutine: { /* jump */ assert( pOp->p1>0 && pOp->p1<=(p->nMem-p->nCursor) ); @@ -67859,9 +70980,11 @@ /* Opcode: EndCoroutine P1 * * * * ** -** The instruction at the address in register P1 is an OP_Yield. -** Jump to the P2 parameter of that OP_Yield. +** The instruction at the address in register P1 is a Yield. +** Jump to the P2 parameter of that Yield. ** After the jump, register P1 becomes undefined. +** +** See also: InitCoroutine */ case OP_EndCoroutine: { /* in1 */ VdbeOp *pCaller; @@ -67878,11 +71001,16 @@ /* Opcode: Yield P1 P2 * * * ** -** Swap the program counter with the value in register P1. +** Swap the program counter with the value in register P1. This +** has the effect of yielding to a coroutine. ** -** If the co-routine ends with OP_Yield or OP_Return then continue -** to the next instruction. But if the co-routine ends with -** OP_EndCoroutine, jump immediately to P2. +** If the coroutine that is launched by this instruction ends with +** Yield or Return then continue to the next instruction. But if +** the coroutine launched by this instruction ends with +** EndCoroutine, then jump to P2 rather than continuing with the +** next instruction. +** +** See also: InitCoroutine */ case OP_Yield: { /* in1, jump */ int pcDest; @@ -68036,7 +71164,7 @@ case OP_Real: { /* same as TK_FLOAT, out2-prerelease */ pOut->flags = MEM_Real; assert( !sqlite3IsNaN(*pOp->p4.pReal) ); - pOut->r = *pOp->p4.pReal; + pOut->u.r = *pOp->p4.pReal; break; } #endif @@ -68045,7 +71173,7 @@ ** Synopsis: r[P2]='P4' ** ** P4 points to a nul terminated UTF-8 string. This opcode is transformed -** into an OP_String before it is executed for the first time. During +** into a String before it is executed for the first time. During ** this transformation, the length of string P4 is computed and stored ** as the P1 parameter. */ @@ -68059,9 +71187,9 @@ rc = sqlite3VdbeMemSetStr(pOut, pOp->p4.z, -1, SQLITE_UTF8, SQLITE_STATIC); if( rc==SQLITE_TOOBIG ) goto too_big; if( SQLITE_OK!=sqlite3VdbeChangeEncoding(pOut, encoding) ) goto no_mem; - assert( pOut->zMalloc==pOut->z ); + assert( pOut->szMalloc>0 && pOut->zMalloc==pOut->z ); assert( VdbeMemDynamic(pOut)==0 ); - pOut->zMalloc = 0; + pOut->szMalloc = 0; pOut->flags |= MEM_Static; if( pOp->p4type==P4_DYNAMIC ){ sqlite3DbFree(db, pOp->p4.z); @@ -68113,7 +71241,7 @@ while( cnt>0 ){ pOut++; memAboutToChange(p, pOut); - VdbeMemRelease(pOut); + sqlite3VdbeMemSetNull(pOut); pOut->flags = nullFlag; cnt--; } @@ -68174,21 +71302,21 @@ /* Opcode: Move P1 P2 P3 * * ** Synopsis: r[P2@P3]=r[P1@P3] ** -** Move the values in register P1..P1+P3 over into -** registers P2..P2+P3. Registers P1..P1+P3 are +** Move the P3 values in register P1..P1+P3-1 over into +** registers P2..P2+P3-1. Registers P1..P1+P3-1 are ** left holding a NULL. It is an error for register ranges -** P1..P1+P3 and P2..P2+P3 to overlap. +** P1..P1+P3-1 and P2..P2+P3-1 to overlap. It is an error +** for P3 to be less than 1. */ case OP_Move: { - char *zMalloc; /* Holding variable for allocated memory */ int n; /* Number of registers left to copy */ int p1; /* Register to copy from */ int p2; /* Register to copy to */ n = pOp->p3; p1 = pOp->p1; p2 = pOp->p2; - assert( n>=0 && p1>0 && p2>0 ); + assert( n>0 && p1>0 && p2>0 ); assert( p1+n<=p2 || p2+n<=p1 ); pIn1 = &aMem[p1]; @@ -68198,21 +71326,16 @@ assert( pIn1<=&aMem[(p->nMem-p->nCursor)] ); assert( memIsValid(pIn1) ); memAboutToChange(p, pOut); - VdbeMemRelease(pOut); - zMalloc = pOut->zMalloc; - memcpy(pOut, pIn1, sizeof(Mem)); + sqlite3VdbeMemMove(pOut, pIn1); #ifdef SQLITE_DEBUG if( pOut->pScopyFrom>=&aMem[p1] && pOut->pScopyFrom<&aMem[p1+pOp->p3] ){ pOut->pScopyFrom += p1 - pOp->p2; } #endif - pIn1->flags = MEM_Undefined; - pIn1->xDel = 0; - pIn1->zMalloc = zMalloc; REGISTER_TRACE(p2++, pOut); pIn1++; pOut++; - }while( n-- ); + }while( --n ); break; } @@ -68444,20 +71567,22 @@ case OP_Divide: /* same as TK_SLASH, in1, in2, out3 */ case OP_Remainder: { /* same as TK_REM, in1, in2, out3 */ char bIntint; /* Started out as two integer operands */ - int flags; /* Combined MEM_* flags from both inputs */ + u16 flags; /* Combined MEM_* flags from both inputs */ + u16 type1; /* Numeric type of left operand */ + u16 type2; /* Numeric type of right operand */ i64 iA; /* Integer value of left operand */ i64 iB; /* Integer value of right operand */ double rA; /* Real value of left operand */ double rB; /* Real value of right operand */ pIn1 = &aMem[pOp->p1]; - applyNumericAffinity(pIn1); + type1 = numericType(pIn1); pIn2 = &aMem[pOp->p2]; - applyNumericAffinity(pIn2); + type2 = numericType(pIn2); pOut = &aMem[pOp->p3]; flags = pIn1->flags | pIn2->flags; if( (flags & MEM_Null)!=0 ) goto arithmetic_result_is_null; - if( (pIn1->flags & pIn2->flags & MEM_Int)==MEM_Int ){ + if( (type1 & type2 & MEM_Int)!=0 ){ iA = pIn1->u.i; iB = pIn2->u.i; bIntint = 1; @@ -68511,9 +71636,9 @@ if( sqlite3IsNaN(rB) ){ goto arithmetic_result_is_null; } - pOut->r = rB; + pOut->u.r = rB; MemSetTypeFlag(pOut, MEM_Real); - if( (flags & MEM_Real)==0 && !bIntint ){ + if( ((type1|type2)&MEM_Real)==0 && !bIntint ){ sqlite3VdbeIntegerAffinity(pOut); } #endif @@ -68576,8 +71701,8 @@ apVal = p->apArg; assert( apVal || n==0 ); assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) ); - pOut = &aMem[pOp->p3]; - memAboutToChange(p, pOut); + ctx.pOut = &aMem[pOp->p3]; + memAboutToChange(p, ctx.pOut); assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem-p->nCursor)+1) ); assert( pOp->p3p2 || pOp->p3>=pOp->p2+n ); @@ -68593,65 +71718,29 @@ ctx.pFunc = pOp->p4.pFunc; ctx.iOp = pc; ctx.pVdbe = p; - - /* The output cell may already have a buffer allocated. Move - ** the pointer to ctx.s so in case the user-function can use - ** the already allocated buffer instead of allocating a new one. - */ - memcpy(&ctx.s, pOut, sizeof(Mem)); - pOut->flags = MEM_Null; - pOut->xDel = 0; - pOut->zMalloc = 0; - MemSetTypeFlag(&ctx.s, MEM_Null); - + MemSetTypeFlag(ctx.pOut, MEM_Null); ctx.fErrorOrAux = 0; - if( ctx.pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL ){ - assert( pOp>aOp ); - assert( pOp[-1].p4type==P4_COLLSEQ ); - assert( pOp[-1].opcode==OP_CollSeq ); - ctx.pColl = pOp[-1].p4.pColl; - } db->lastRowid = lastRowid; (*ctx.pFunc->xFunc)(&ctx, n, apVal); /* IMP: R-24505-23230 */ - lastRowid = db->lastRowid; + lastRowid = db->lastRowid; /* Remember rowid changes made by xFunc */ - if( db->mallocFailed ){ - /* Even though a malloc() has failed, the implementation of the - ** user function may have called an sqlite3_result_XXX() function - ** to return a value. The following call releases any resources - ** associated with such a value. - */ - sqlite3VdbeMemRelease(&ctx.s); - goto no_mem; - } - /* If the function returned an error, throw an exception */ if( ctx.fErrorOrAux ){ if( ctx.isError ){ - sqlite3SetString(&p->zErrMsg, db, "%s", sqlite3_value_text(&ctx.s)); + sqlite3SetString(&p->zErrMsg, db, "%s", sqlite3_value_text(ctx.pOut)); rc = ctx.isError; } sqlite3VdbeDeleteAuxData(p, pc, pOp->p1); } /* Copy the result of the function into register P3 */ - sqlite3VdbeChangeEncoding(&ctx.s, encoding); - assert( pOut->flags==MEM_Null ); - memcpy(pOut, &ctx.s, sizeof(Mem)); - if( sqlite3VdbeMemTooBig(pOut) ){ + sqlite3VdbeChangeEncoding(ctx.pOut, encoding); + if( sqlite3VdbeMemTooBig(ctx.pOut) ){ goto too_big; } -#if 0 - /* The app-defined function has done something that as caused this - ** statement to expire. (Perhaps the function called sqlite3_exec() - ** with a CREATE TABLE statement.) - */ - if( p->expired ) rc = SQLITE_ABORT; -#endif - - REGISTER_TRACE(pOp->p3, pOut); - UPDATE_MAX_BLOBSIZE(pOut); + REGISTER_TRACE(pOp->p3, ctx.pOut); + UPDATE_MAX_BLOBSIZE(ctx.pOut); break; } @@ -68799,106 +71888,37 @@ #endif #ifndef SQLITE_OMIT_CAST -/* Opcode: ToText P1 * * * * +/* Opcode: Cast P1 P2 * * * +** Synopsis: affinity(r[P1]) ** -** Force the value in register P1 to be text. -** If the value is numeric, convert it to a string using the -** equivalent of sprintf(). Blob values are unchanged and -** are afterwards simply interpreted as text. +** Force the value in register P1 to be the type defined by P2. +** +**
      +**
    • TEXT +**
    • BLOB +**
    • NUMERIC +**
    • INTEGER +**
    • REAL +**
    ** ** A NULL value is not changed by this routine. It remains NULL. */ -case OP_ToText: { /* same as TK_TO_TEXT, in1 */ +case OP_Cast: { /* in1 */ + assert( pOp->p2>=SQLITE_AFF_NONE && pOp->p2<=SQLITE_AFF_REAL ); + testcase( pOp->p2==SQLITE_AFF_TEXT ); + testcase( pOp->p2==SQLITE_AFF_NONE ); + testcase( pOp->p2==SQLITE_AFF_NUMERIC ); + testcase( pOp->p2==SQLITE_AFF_INTEGER ); + testcase( pOp->p2==SQLITE_AFF_REAL ); pIn1 = &aMem[pOp->p1]; memAboutToChange(p, pIn1); - if( pIn1->flags & MEM_Null ) break; - assert( MEM_Str==(MEM_Blob>>3) ); - pIn1->flags |= (pIn1->flags&MEM_Blob)>>3; - applyAffinity(pIn1, SQLITE_AFF_TEXT, encoding); rc = ExpandBlob(pIn1); - assert( pIn1->flags & MEM_Str || db->mallocFailed ); - pIn1->flags &= ~(MEM_Int|MEM_Real|MEM_Blob|MEM_Zero); + sqlite3VdbeMemCast(pIn1, pOp->p2, encoding); UPDATE_MAX_BLOBSIZE(pIn1); break; } - -/* Opcode: ToBlob P1 * * * * -** -** Force the value in register P1 to be a BLOB. -** If the value is numeric, convert it to a string first. -** Strings are simply reinterpreted as blobs with no change -** to the underlying data. -** -** A NULL value is not changed by this routine. It remains NULL. -*/ -case OP_ToBlob: { /* same as TK_TO_BLOB, in1 */ - pIn1 = &aMem[pOp->p1]; - if( pIn1->flags & MEM_Null ) break; - if( (pIn1->flags & MEM_Blob)==0 ){ - applyAffinity(pIn1, SQLITE_AFF_TEXT, encoding); - assert( pIn1->flags & MEM_Str || db->mallocFailed ); - MemSetTypeFlag(pIn1, MEM_Blob); - }else{ - pIn1->flags &= ~(MEM_TypeMask&~MEM_Blob); - } - UPDATE_MAX_BLOBSIZE(pIn1); - break; -} - -/* Opcode: ToNumeric P1 * * * * -** -** Force the value in register P1 to be numeric (either an -** integer or a floating-point number.) -** If the value is text or blob, try to convert it to an using the -** equivalent of atoi() or atof() and store 0 if no such conversion -** is possible. -** -** A NULL value is not changed by this routine. It remains NULL. -*/ -case OP_ToNumeric: { /* same as TK_TO_NUMERIC, in1 */ - pIn1 = &aMem[pOp->p1]; - sqlite3VdbeMemNumerify(pIn1); - break; -} #endif /* SQLITE_OMIT_CAST */ -/* Opcode: ToInt P1 * * * * -** -** Force the value in register P1 to be an integer. If -** The value is currently a real number, drop its fractional part. -** If the value is text or blob, try to convert it to an integer using the -** equivalent of atoi() and store 0 if no such conversion is possible. -** -** A NULL value is not changed by this routine. It remains NULL. -*/ -case OP_ToInt: { /* same as TK_TO_INT, in1 */ - pIn1 = &aMem[pOp->p1]; - if( (pIn1->flags & MEM_Null)==0 ){ - sqlite3VdbeMemIntegerify(pIn1); - } - break; -} - -#if !defined(SQLITE_OMIT_CAST) && !defined(SQLITE_OMIT_FLOATING_POINT) -/* Opcode: ToReal P1 * * * * -** -** Force the value in register P1 to be a floating point number. -** If The value is currently an integer, convert it. -** If the value is text or blob, try to convert it to an integer using the -** equivalent of atoi() and store 0.0 if no such conversion is possible. -** -** A NULL value is not changed by this routine. It remains NULL. -*/ -case OP_ToReal: { /* same as TK_TO_REAL, in1 */ - pIn1 = &aMem[pOp->p1]; - memAboutToChange(p, pIn1); - if( (pIn1->flags & MEM_Null)==0 ){ - sqlite3VdbeMemRealify(pIn1); - } - break; -} -#endif /* !defined(SQLITE_OMIT_CAST) && !defined(SQLITE_OMIT_FLOATING_POINT) */ - /* Opcode: Lt P1 P2 P3 P4 P5 ** Synopsis: if r[P1]p5 & SQLITE_AFF_MASK; - if( affinity ){ - applyAffinity(pIn1, affinity, encoding); - applyAffinity(pIn3, affinity, encoding); - if( db->mallocFailed ) goto no_mem; + if( affinity>=SQLITE_AFF_NUMERIC ){ + if( (pIn1->flags & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){ + applyNumericAffinity(pIn1,0); + } + if( (pIn3->flags & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){ + applyNumericAffinity(pIn3,0); + } + }else if( affinity==SQLITE_AFF_TEXT ){ + if( (pIn1->flags & MEM_Str)==0 && (pIn1->flags & (MEM_Int|MEM_Real))!=0 ){ + testcase( pIn1->flags & MEM_Int ); + testcase( pIn1->flags & MEM_Real ); + sqlite3VdbeMemStringify(pIn1, encoding, 1); + } + if( (pIn3->flags & MEM_Str)==0 && (pIn3->flags & (MEM_Int|MEM_Real))!=0 ){ + testcase( pIn3->flags & MEM_Int ); + testcase( pIn3->flags & MEM_Real ); + sqlite3VdbeMemStringify(pIn3, encoding, 1); + } } - assert( pOp->p4type==P4_COLLSEQ || pOp->p4.pColl==0 ); - ExpandBlob(pIn1); - ExpandBlob(pIn3); + if( pIn1->flags & MEM_Zero ){ + sqlite3VdbeMemExpandBlob(pIn1); + flags1 &= ~MEM_Zero; + } + if( pIn3->flags & MEM_Zero ){ + sqlite3VdbeMemExpandBlob(pIn3); + flags3 &= ~MEM_Zero; + } + if( db->mallocFailed ) goto no_mem; res = sqlite3MemCompare(pIn3, pIn1, pOp->p4.pColl); } switch( pOp->opcode ){ @@ -69067,8 +72107,8 @@ } } /* Undo any changes made by applyAffinity() to the input registers. */ - pIn1->flags = (pIn1->flags&~MEM_TypeMask) | (flags1&MEM_TypeMask); - pIn3->flags = (pIn3->flags&~MEM_TypeMask) | (flags3&MEM_TypeMask); + pIn1->flags = flags1; + pIn3->flags = flags3; break; } @@ -69089,6 +72129,7 @@ } /* Opcode: Compare P1 P2 P3 P4 P5 +** Synopsis: r[P1@P3] <-> r[P2@P3] ** ** Compare two vectors of registers in reg(P1)..reg(P1+P3-1) (call this ** vector "A") and in reg(P2)..reg(P2+P3-1) ("B"). Save the result of @@ -69235,10 +72276,10 @@ case OP_Not: { /* same as TK_NOT, in1, out2 */ pIn1 = &aMem[pOp->p1]; pOut = &aMem[pOp->p2]; - if( pIn1->flags & MEM_Null ){ - sqlite3VdbeMemSetNull(pOut); - }else{ - sqlite3VdbeMemSetInt64(pOut, !sqlite3VdbeIntValue(pIn1)); + sqlite3VdbeMemSetNull(pOut); + if( (pIn1->flags & MEM_Null)==0 ){ + pOut->flags = MEM_Int; + pOut->u.i = !sqlite3VdbeIntValue(pIn1); } break; } @@ -69253,20 +72294,24 @@ case OP_BitNot: { /* same as TK_BITNOT, in1, out2 */ pIn1 = &aMem[pOp->p1]; pOut = &aMem[pOp->p2]; - if( pIn1->flags & MEM_Null ){ - sqlite3VdbeMemSetNull(pOut); - }else{ - sqlite3VdbeMemSetInt64(pOut, ~sqlite3VdbeIntValue(pIn1)); + sqlite3VdbeMemSetNull(pOut); + if( (pIn1->flags & MEM_Null)==0 ){ + pOut->flags = MEM_Int; + pOut->u.i = ~sqlite3VdbeIntValue(pIn1); } break; } /* Opcode: Once P1 P2 * * * ** -** Check if OP_Once flag P1 is set. If so, jump to instruction P2. Otherwise, -** set the flag and fall through to the next instruction. In other words, -** this opcode causes all following opcodes up through P2 (but not including -** P2) to run just once and to be skipped on subsequent times through the loop. +** Check the "once" flag number P1. If it is set, jump to instruction P2. +** Otherwise, set the flag and fall through to the next instruction. +** In other words, this opcode causes all following opcodes up through P2 +** (but not including P2) to run just once and to be skipped on subsequent +** times through the loop. +** +** All "once" flags are initially cleared whenever a prepared statement +** first begins to run. */ case OP_Once: { /* jump */ assert( pOp->p1nOnceFlag ); @@ -69283,13 +72328,13 @@ ** ** Jump to P2 if the value in register P1 is true. The value ** is considered true if it is numeric and non-zero. If the value -** in P1 is NULL then take the jump if P3 is non-zero. +** in P1 is NULL then take the jump if and only if P3 is non-zero. */ /* Opcode: IfNot P1 P2 P3 * * ** ** Jump to P2 if the value in register P1 is False. The value ** is considered false if it has a numeric value of zero. If the value -** in P1 is NULL then take the jump if P3 is zero. +** in P1 is NULL then take the jump if and only if P3 is non-zero. */ case OP_If: /* jump, in1 */ case OP_IfNot: { /* jump, in1 */ @@ -69370,7 +72415,6 @@ int p2; /* column number to retrieve */ VdbeCursor *pC; /* The VDBE cursor */ BtCursor *pCrsr; /* The BTree cursor */ - u32 *aType; /* aType[i] holds the numeric type of the i-th column */ u32 *aOffset; /* aOffset[i] is offset to start of data for i-th column */ int len; /* The length of the serialized data for the column */ int i; /* Loop counter */ @@ -69383,6 +72427,7 @@ u32 szField; /* Number of bytes in the content of a field */ u32 avail; /* Number of bytes of available data */ u32 t; /* A type code from the record header */ + u16 fx; /* pDest->flags value */ Mem *pReg; /* PseudoTable input register */ p2 = pOp->p2; @@ -69393,8 +72438,7 @@ pC = p->apCsr[pOp->p1]; assert( pC!=0 ); assert( p2nField ); - aType = pC->aType; - aOffset = aType + pC->nField; + aOffset = pC->aOffset; #ifndef SQLITE_OMIT_VIRTUALTABLE assert( pC->pVtabCursor==0 ); /* OP_Column never called on virtual table */ #endif @@ -69405,7 +72449,7 @@ /* If the cursor cache is stale, bring it up-to-date */ rc = sqlite3VdbeCursorMoveto(pC); if( rc ) goto abort_due_to_error; - if( pC->cacheStatus!=p->cacheCtr || (pOp->p5&OPFLAG_CLEARCACHE)!=0 ){ + if( pC->cacheStatus!=p->cacheCtr ){ if( pC->nullRow ){ if( pCrsr==0 ){ assert( pC->pseudoTableReg>0 ); @@ -69415,7 +72459,7 @@ pC->payloadSize = pC->szRow = avail = pReg->n; pC->aRow = (u8*)pReg->z; }else{ - MemSetTypeFlag(pDest, MEM_Null); + sqlite3VdbeMemSetNull(pDest); goto op_column_out; } }else{ @@ -69450,14 +72494,6 @@ pC->iHdrOffset = getVarint32(pC->aRow, offset); pC->nHdrParsed = 0; aOffset[0] = offset; - if( availaRow does not have to hold the entire row, but it does at least - ** need to cover the header of the record. If pC->aRow does not contain - ** the complete header, then set it to zero, forcing the header to be - ** dynamically allocated. */ - pC->aRow = 0; - pC->szRow = 0; - } /* Make sure a corrupt database has not given us an oversize header. ** Do this now to avoid an oversize memory allocation. @@ -69472,15 +72508,32 @@ rc = SQLITE_CORRUPT_BKPT; goto op_column_error; } + + if( availaRow does not have to hold the entire row, but it does at least + ** need to cover the header of the record. If pC->aRow does not contain + ** the complete header, then set it to zero, forcing the header to be + ** dynamically allocated. */ + pC->aRow = 0; + pC->szRow = 0; + } + + /* The following goto is an optimization. It can be omitted and + ** everything will still work. But OP_Column is measurably faster + ** by skipping the subsequent conditional, which is always true. + */ + assert( pC->nHdrParsed<=p2 ); /* Conditional skipped */ + goto op_column_read_header; } /* Make sure at least the first p2+1 entries of the header have been - ** parsed and valid information is in aOffset[] and aType[]. + ** parsed and valid information is in aOffset[] and pC->aType[]. */ if( pC->nHdrParsed<=p2 ){ /* If there is more header available for parsing in the record, try ** to extract additional fields up through the p2+1-th field */ + op_column_read_header: if( pC->iHdrOffsetaRow==0 ){ @@ -69495,7 +72548,7 @@ zData = pC->aRow; } - /* Fill in aType[i] and aOffset[i] values through the p2-th field. */ + /* Fill in pC->aType[i] and aOffset[i] values through the p2-th field. */ i = pC->nHdrParsed; offset = aOffset[i]; zHdr = zData + pC->iHdrOffset; @@ -69508,7 +72561,7 @@ }else{ zHdr += sqlite3GetVarint32(zHdr, &t); } - aType[i] = t; + pC->aType[i] = t; szField = sqlite3VdbeSerialTypeLen(t); offset += szField; if( offsetzEndHdr) + ** (2) the entire header was used but not all data was used + ** (zHdr==zEndHdr && offset!=pC->payloadSize) + ** (3) the end of the data extends beyond the end of the record. + ** (offset > pC->payloadSize) */ - if( (zHdr > zEndHdr) + if( (zHdr>=zEndHdr && (zHdr>zEndHdr || offset!=pC->payloadSize)) || (offset > pC->payloadSize) - || (zHdr==zEndHdr && offset!=pC->payloadSize) ){ rc = SQLITE_CORRUPT_BKPT; goto op_column_error; @@ -69548,68 +72602,68 @@ if( pOp->p4type==P4_MEM ){ sqlite3VdbeMemShallowCopy(pDest, pOp->p4.pMem, MEM_Static); }else{ - MemSetTypeFlag(pDest, MEM_Null); + sqlite3VdbeMemSetNull(pDest); } goto op_column_out; } } /* Extract the content for the p2+1-th column. Control can only - ** reach this point if aOffset[p2], aOffset[p2+1], and aType[p2] are + ** reach this point if aOffset[p2], aOffset[p2+1], and pC->aType[p2] are ** all valid. */ assert( p2nHdrParsed ); assert( rc==SQLITE_OK ); assert( sqlite3VdbeCheckMemInvariants(pDest) ); + if( VdbeMemDynamic(pDest) ) sqlite3VdbeMemSetNull(pDest); + t = pC->aType[p2]; if( pC->szRow>=aOffset[p2+1] ){ /* This is the common case where the desired content fits on the original ** page - where the content is not on an overflow page */ - VdbeMemRelease(pDest); - sqlite3VdbeSerialGet(pC->aRow+aOffset[p2], aType[p2], pDest); + sqlite3VdbeSerialGet(pC->aRow+aOffset[p2], t, pDest); }else{ /* This branch happens only when content is on overflow pages */ - t = aType[p2]; if( ((pOp->p5 & (OPFLAG_LENGTHARG|OPFLAG_TYPEOFARG))!=0 && ((t>=12 && (t&1)==0) || (pOp->p5 & OPFLAG_TYPEOFARG)!=0)) || (len = sqlite3VdbeSerialTypeLen(t))==0 ){ - /* Content is irrelevant for the typeof() function and for - ** the length(X) function if X is a blob. So we might as well use - ** bogus content rather than reading content from disk. NULL works - ** for text and blob and whatever is in the payloadSize64 variable - ** will work for everything else. Content is also irrelevant if - ** the content length is 0. */ - zData = t<=13 ? (u8*)&payloadSize64 : 0; - sMem.zMalloc = 0; + /* Content is irrelevant for + ** 1. the typeof() function, + ** 2. the length(X) function if X is a blob, and + ** 3. if the content length is zero. + ** So we might as well use bogus content rather than reading + ** content from disk. NULL will work for the value for strings + ** and blobs and whatever is in the payloadSize64 variable + ** will work for everything else. */ + sqlite3VdbeSerialGet(t<=13 ? (u8*)&payloadSize64 : 0, t, pDest); }else{ - memset(&sMem, 0, sizeof(sMem)); - sqlite3VdbeMemMove(&sMem, pDest); rc = sqlite3VdbeMemFromBtree(pCrsr, aOffset[p2], len, !pC->isTable, - &sMem); + pDest); if( rc!=SQLITE_OK ){ goto op_column_error; } - zData = (u8*)sMem.z; + sqlite3VdbeSerialGet((const u8*)pDest->z, t, pDest); + pDest->flags &= ~MEM_Ephem; } - sqlite3VdbeSerialGet(zData, t, pDest); - /* If we dynamically allocated space to hold the data (in the - ** sqlite3VdbeMemFromBtree() call above) then transfer control of that - ** dynamically allocated space over to the pDest structure. - ** This prevents a memory copy. */ - if( sMem.zMalloc ){ - assert( sMem.z==sMem.zMalloc ); - assert( VdbeMemDynamic(pDest)==0 ); - assert( (pDest->flags & (MEM_Blob|MEM_Str))==0 || pDest->z==sMem.z ); - pDest->flags &= ~(MEM_Ephem|MEM_Static); - pDest->flags |= MEM_Term; - pDest->z = sMem.z; - pDest->zMalloc = sMem.zMalloc; - } } pDest->enc = encoding; op_column_out: - Deephemeralize(pDest); + /* If the column value is an ephemeral string, go ahead and persist + ** that string in case the cursor moves before the column value is + ** used. The following code does the equivalent of Deephemeralize() + ** but does it faster. */ + if( (pDest->flags & MEM_Ephem)!=0 && pDest->z ){ + fx = pDest->flags & (MEM_Str|MEM_Blob); + assert( fx!=0 ); + zData = (const u8*)pDest->z; + len = pDest->n; + if( sqlite3VdbeMemClearAndResize(pDest, len+2) ) goto no_mem; + memcpy(pDest->z, zData, len); + pDest->z[len] = 0; + pDest->z[len+1] = 0; + pDest->flags = fx|MEM_Term; + } op_column_error: UPDATE_MAX_BLOBSIZE(pDest); REGISTER_TRACE(pOp->p3, pDest); @@ -69684,7 +72738,7 @@ ** ------------------------------------------------------------------------ ** ** Data(0) is taken from register P1. Data(1) comes from register P1+1 - ** and so froth. + ** and so forth. ** ** Each type field is a varint representing the serial type of the ** corresponding data element (see sqlite3VdbeSerialType()). The @@ -69724,7 +72778,7 @@ pRec = pLast; do{ assert( memIsValid(pRec) ); - serial_type = sqlite3VdbeSerialType(pRec, file_format); + pRec->uTemp = serial_type = sqlite3VdbeSerialType(pRec, file_format); len = sqlite3VdbeSerialTypeLen(serial_type); if( pRec->flags & MEM_Zero ){ if( nData ){ @@ -69740,7 +72794,10 @@ nHdr += serial_type<=127 ? 1 : sqlite3VarintLen(serial_type); }while( (--pRec)>=pData0 ); - /* Add the initial header varint and total the size */ + /* EVIDENCE-OF: R-22564-11647 The header begins with a single varint + ** which determines the total number of bytes in the header. The varint + ** value is the size of the header in bytes including the size varint + ** itself. */ testcase( nHdr==126 ); testcase( nHdr==127 ); if( nHdr<=126 ){ @@ -69760,9 +72817,9 @@ /* Make sure the output register has a buffer large enough to store ** the new record. The output register (pOp->p3) is not allowed to ** be one of the input registers (because the following call to - ** sqlite3VdbeMemGrow() could clobber the value before it is used). + ** sqlite3VdbeMemClearAndResize() could clobber the value before it is used). */ - if( sqlite3VdbeMemGrow(pOut, (int)nByte, 0) ){ + if( sqlite3VdbeMemClearAndResize(pOut, (int)nByte) ){ goto no_mem; } zNewRecord = (u8 *)pOut->z; @@ -69773,8 +72830,12 @@ assert( pData0<=pLast ); pRec = pData0; do{ - serial_type = sqlite3VdbeSerialType(pRec, file_format); + serial_type = pRec->uTemp; + /* EVIDENCE-OF: R-06529-47362 Following the size varint are one or more + ** additional varints, one per column. */ i += putVarint32(&zNewRecord[i], serial_type); /* serial type */ + /* EVIDENCE-OF: R-64536-51728 The values for each column in the record + ** immediately follow the header. */ j += sqlite3VdbeSerialPut(&zNewRecord[j], pRec, serial_type); /* content */ }while( (++pRec)<=pLast ); assert( i==nHdr ); @@ -69783,7 +72844,6 @@ assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) ); pOut->n = (int)nByte; pOut->flags = MEM_Blob; - pOut->xDel = 0; if( nZero ){ pOut->u.nZero = nZero; pOut->flags |= MEM_Zero; @@ -69930,19 +72990,26 @@ db->isTransactionSavepoint = 0; rc = p->rc; }else{ + int isSchemaChange; iSavepoint = db->nSavepoint - iSavepoint - 1; if( p1==SAVEPOINT_ROLLBACK ){ + isSchemaChange = (db->flags & SQLITE_InternChanges)!=0; for(ii=0; iinDb; ii++){ - sqlite3BtreeTripAllCursors(db->aDb[ii].pBt, SQLITE_ABORT); + rc = sqlite3BtreeTripAllCursors(db->aDb[ii].pBt, + SQLITE_ABORT_ROLLBACK, + isSchemaChange==0); + if( rc!=SQLITE_OK ) goto abort_due_to_error; } + }else{ + isSchemaChange = 0; } for(ii=0; iinDb; ii++){ rc = sqlite3BtreeSavepoint(db->aDb[ii].pBt, p1, iSavepoint); if( rc!=SQLITE_OK ){ goto abort_due_to_error; } } - if( p1==SAVEPOINT_ROLLBACK && (db->flags&SQLITE_InternChanges)!=0 ){ + if( isSchemaChange ){ sqlite3ExpirePreparedStatements(db); sqlite3ResetAllSchemasOfConnection(db); db->flags = (db->flags | SQLITE_InternChanges); @@ -70101,7 +73168,7 @@ assert( p->bIsReader ); assert( p->readOnly==0 || pOp->p2==0 ); assert( pOp->p1>=0 && pOp->p1nDb ); - assert( (p->btreeMask & (((yDbMask)1)<p1))!=0 ); + assert( DbMaskTest(p->btreeMask, pOp->p1) ); if( pOp->p2 && (db->flags & SQLITE_QueryOnly)!=0 ){ rc = SQLITE_READONLY; goto abort_due_to_error; @@ -70196,7 +73263,7 @@ assert( pOp->p3=0 && iDbnDb ); assert( db->aDb[iDb].pBt!=0 ); - assert( (p->btreeMask & (((yDbMask)1)<btreeMask, iDb) ); sqlite3BtreeGetMeta(db->aDb[iDb].pBt, iCookie, (u32 *)&iMeta); pOut->u.i = iMeta; @@ -70217,7 +73284,7 @@ Db *pDb; assert( pOp->p2p1>=0 && pOp->p1nDb ); - assert( (p->btreeMask & (((yDbMask)1)<p1))!=0 ); + assert( DbMaskTest(p->btreeMask, pOp->p1) ); assert( p->readOnly==0 ); pDb = &db->aDb[pOp->p1]; assert( pDb->pBt!=0 ); @@ -70272,8 +73339,22 @@ ** sequence of the index being opened. Otherwise, if P4 is an integer ** value, it is set to the number of columns in the table. ** -** See also OpenWrite. +** See also: OpenWrite, ReopenIdx */ +/* Opcode: ReopenIdx P1 P2 P3 P4 P5 +** Synopsis: root=P2 iDb=P3 +** +** The ReopenIdx opcode works exactly like ReadOpen except that it first +** checks to see if the cursor on P1 is already open with a root page +** number of P2 and if it is this opcode becomes a no-op. In other words, +** if the cursor is already open, do not reopen it. +** +** The ReopenIdx opcode may only be used with P5==0 and with P4 being +** a P4_KEYINFO object. Furthermore, the P3 value must be the same as +** every other ReopenIdx or OpenRead for the same cursor number. +** +** See the OpenRead opcode documentation for additional information. +*/ /* Opcode: OpenWrite P1 P2 P3 P4 P5 ** Synopsis: root=P2 iDb=P3 ** @@ -70294,6 +73375,19 @@ ** ** See also OpenRead. */ +case OP_ReopenIdx: { + VdbeCursor *pCur; + + assert( pOp->p5==0 ); + assert( pOp->p4type==P4_KEYINFO ); + pCur = p->apCsr[pOp->p1]; + if( pCur && pCur->pgnoRoot==(u32)pOp->p2 ){ + assert( pCur->iDb==pOp->p3 ); /* Guaranteed by the code generator */ + break; + } + /* If the cursor is not currently open or is open on a different + ** index, then fall through into OP_OpenRead to force a reopen */ +} case OP_OpenRead: case OP_OpenWrite: { int nField; @@ -70308,10 +73402,11 @@ assert( (pOp->p5&(OPFLAG_P2ISREG|OPFLAG_BULKCSR))==pOp->p5 ); assert( pOp->opcode==OP_OpenWrite || pOp->p5==0 ); assert( p->bIsReader ); - assert( pOp->opcode==OP_OpenRead || p->readOnly==0 ); + assert( pOp->opcode==OP_OpenRead || pOp->opcode==OP_ReopenIdx + || p->readOnly==0 ); if( p->expired ){ - rc = SQLITE_ABORT; + rc = SQLITE_ABORT_ROLLBACK; break; } @@ -70320,7 +73415,7 @@ p2 = pOp->p2; iDb = pOp->p3; assert( iDb>=0 && iDbnDb ); - assert( (p->btreeMask & (((yDbMask)1)<btreeMask, iDb) ); pDb = &db->aDb[iDb]; pX = pDb->pBt; assert( pX!=0 ); @@ -70365,15 +73460,12 @@ if( pCur==0 ) goto no_mem; pCur->nullRow = 1; pCur->isOrdered = 1; + pCur->pgnoRoot = p2; rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->pCursor); pCur->pKeyInfo = pKeyInfo; assert( OPFLAG_BULKCSR==BTREE_BULKLOAD ); sqlite3BtreeCursorHints(pCur->pCursor, (pOp->p5 & OPFLAG_BULKCSR)); - /* Since it performs no memory allocation or IO, the only value that - ** sqlite3BtreeCursor() may return is SQLITE_OK. */ - assert( rc==SQLITE_OK ); - /* Set the VdbeCursor.isTable variable. Previous versions of ** SQLite used to check if the root-page flags were sane at this point ** and report database corruption if they were not, but this check has @@ -70424,6 +73516,7 @@ pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, 1); if( pCx==0 ) goto no_mem; pCx->nullRow = 1; + pCx->isEphemeral = 1; rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBt, BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5, vfsFlags); if( rc==SQLITE_OK ){ @@ -70456,11 +73549,15 @@ break; } -/* Opcode: SorterOpen P1 P2 * P4 * +/* Opcode: SorterOpen P1 P2 P3 P4 * ** ** This opcode works like OP_OpenEphemeral except that it opens ** a transient index that is specifically designed to sort large ** tables using an external merge-sort algorithm. +** +** If argument P3 is non-zero, then it indicates that the sorter may +** assume that a stable sort considering the first P3 fields of each +** key is sufficient to produce the required results. */ case OP_SorterOpen: { VdbeCursor *pCx; @@ -70472,10 +73569,28 @@ pCx->pKeyInfo = pOp->p4.pKeyInfo; assert( pCx->pKeyInfo->db==db ); assert( pCx->pKeyInfo->enc==ENC(db) ); - rc = sqlite3VdbeSorterInit(db, pCx); + rc = sqlite3VdbeSorterInit(db, pOp->p3, pCx); break; } +/* Opcode: SequenceTest P1 P2 * * * +** Synopsis: if( cursor[P1].ctr++ ) pc = P2 +** +** P1 is a sorter cursor. If the sequence counter is currently zero, jump +** to P2. Regardless of whether or not the jump is taken, increment the +** the sequence value. +*/ +case OP_SequenceTest: { + VdbeCursor *pC; + assert( pOp->p1>=0 && pOp->p1nCursor ); + pC = p->apCsr[pOp->p1]; + assert( pC->pSorter ); + if( (pC->seqCount++)==0 ){ + pc = pOp->p2 - 1; + } + break; +} + /* Opcode: OpenPseudo P1 P2 P3 * * ** Synopsis: P3 columns in r[P2] ** @@ -70518,7 +73633,7 @@ break; } -/* Opcode: SeekGe P1 P2 P3 P4 * +/* Opcode: SeekGE P1 P2 P3 P4 * ** Synopsis: key=r[P3@P4] ** ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), @@ -70530,9 +73645,13 @@ ** is greater than or equal to the key value. If there are no records ** greater than or equal to the key and P2 is not zero, then jump to P2. ** -** See also: Found, NotFound, Distinct, SeekLt, SeekGt, SeekLe +** This opcode leaves the cursor configured to move in forward order, +** from the beginning toward the end. In other words, the cursor is +** configured to use Next, not Prev. +** +** See also: Found, NotFound, SeekLt, SeekGt, SeekLe */ -/* Opcode: SeekGt P1 P2 P3 P4 * +/* Opcode: SeekGT P1 P2 P3 P4 * ** Synopsis: key=r[P3@P4] ** ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), @@ -70544,9 +73663,13 @@ ** is greater than the key value. If there are no records greater than ** the key and P2 is not zero, then jump to P2. ** -** See also: Found, NotFound, Distinct, SeekLt, SeekGe, SeekLe +** This opcode leaves the cursor configured to move in forward order, +** from the beginning toward the end. In other words, the cursor is +** configured to use Next, not Prev. +** +** See also: Found, NotFound, SeekLt, SeekGe, SeekLe */ -/* Opcode: SeekLt P1 P2 P3 P4 * +/* Opcode: SeekLT P1 P2 P3 P4 * ** Synopsis: key=r[P3@P4] ** ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), @@ -70558,9 +73681,13 @@ ** is less than the key value. If there are no records less than ** the key and P2 is not zero, then jump to P2. ** -** See also: Found, NotFound, Distinct, SeekGt, SeekGe, SeekLe +** This opcode leaves the cursor configured to move in reverse order, +** from the end toward the beginning. In other words, the cursor is +** configured to use Prev, not Next. +** +** See also: Found, NotFound, SeekGt, SeekGe, SeekLe */ -/* Opcode: SeekLe P1 P2 P3 P4 * +/* Opcode: SeekLE P1 P2 P3 P4 * ** Synopsis: key=r[P3@P4] ** ** If cursor P1 refers to an SQL table (B-Tree that uses integer keys), @@ -70572,7 +73699,11 @@ ** is less than or equal to the key value. If there are no records ** less than or equal to the key and P2 is not zero, then jump to P2. ** -** See also: Found, NotFound, Distinct, SeekGt, SeekGe, SeekLt +** This opcode leaves the cursor configured to move in reverse order, +** from the end toward the beginning. In other words, the cursor is +** configured to use Prev, not Next. +** +** See also: Found, NotFound, SeekGt, SeekGe, SeekLt */ case OP_SeekLT: /* jump, in3 */ case OP_SeekLE: /* jump, in3 */ @@ -70597,14 +73728,18 @@ assert( pC->pCursor!=0 ); oc = pOp->opcode; pC->nullRow = 0; +#ifdef SQLITE_DEBUG + pC->seekOp = pOp->opcode; +#endif if( pC->isTable ){ /* The input value in P3 might be of any type: integer, real, string, ** blob, or NULL. But it needs to be an integer before we can do - ** the seek, so covert it. */ + ** the seek, so convert it. */ pIn3 = &aMem[pOp->p3]; - applyNumericAffinity(pIn3); + if( (pIn3->flags & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){ + applyNumericAffinity(pIn3, 0); + } iKey = sqlite3VdbeIntValue(pIn3); - pC->rowidIsValid = 0; /* If the P3 value could not be converted into an integer without ** loss of information, then special processing is required... */ @@ -70623,7 +73758,7 @@ ** (x > 4.9) -> (x >= 5) ** (x <= 4.9) -> (x < 5) */ - if( pIn3->r<(double)iKey ){ + if( pIn3->u.r<(double)iKey ){ assert( OP_SeekGE==(OP_SeekGT-1) ); assert( OP_SeekLT==(OP_SeekLE-1) ); assert( (OP_SeekLE & 0x0001)==(OP_SeekGT & 0x0001) ); @@ -70632,21 +73767,18 @@ /* If the approximation iKey is smaller than the actual real search ** term, substitute <= for < and > for >=. */ - else if( pIn3->r>(double)iKey ){ + else if( pIn3->u.r>(double)iKey ){ assert( OP_SeekLE==(OP_SeekLT+1) ); assert( OP_SeekGT==(OP_SeekGE+1) ); assert( (OP_SeekLT & 0x0001)==(OP_SeekGE & 0x0001) ); if( (oc & 0x0001)==(OP_SeekLT & 0x0001) ) oc++; } } rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)iKey, 0, &res); + pC->movetoTarget = iKey; /* Used by OP_Delete */ if( rc!=SQLITE_OK ){ goto abort_due_to_error; } - if( res==0 ){ - pC->rowidIsValid = 1; - pC->lastRowid = iKey; - } }else{ nField = pOp->p4.i; assert( pOp->p4type==P4_INT32 ); @@ -70676,7 +73808,6 @@ if( rc!=SQLITE_OK ){ goto abort_due_to_error; } - pC->rowidIsValid = 0; } pC->deferredMoveto = 0; pC->cacheStatus = CACHE_STALE; @@ -70688,7 +73819,6 @@ res = 0; rc = sqlite3BtreeNext(pC->pCursor, &res); if( rc!=SQLITE_OK ) goto abort_due_to_error; - pC->rowidIsValid = 0; }else{ res = 0; } @@ -70698,7 +73828,6 @@ res = 0; rc = sqlite3BtreePrevious(pC->pCursor, &res); if( rc!=SQLITE_OK ) goto abort_due_to_error; - pC->rowidIsValid = 0; }else{ /* res might be negative because the table is empty. Check to ** see if this is the case. @@ -70735,7 +73864,6 @@ pC->nullRow = 0; pIn2 = &aMem[pOp->p2]; pC->movetoTarget = sqlite3VdbeIntValue(pIn2); - pC->rowidIsValid = 0; pC->deferredMoveto = 1; break; } @@ -70752,6 +73880,10 @@ ** is a prefix of any entry in P1 then a jump is made to P2 and ** P1 is left pointing at the matching entry. ** +** This operation leaves the cursor in a state where it can be +** advanced in the forward direction. The Next instruction will work, +** but not the Prev instruction. +** ** See also: NotFound, NoConflict, NotExists. SeekGe */ /* Opcode: NotFound P1 P2 P3 P4 * @@ -70767,6 +73899,10 @@ ** falls through to the next instruction and P1 is left pointing at the ** matching entry. ** +** This operation leaves the cursor in a state where it cannot be +** advanced in either direction. In other words, the Next and Prev +** opcodes do not work after this operation. +** ** See also: Found, NotExists, NoConflict */ /* Opcode: NoConflict P1 P2 P3 P4 * @@ -70786,6 +73922,10 @@ ** This opcode is similar to OP_NotFound with the exceptions that the ** branch is always taken if any part of the search key input is NULL. ** +** This operation leaves the cursor in a state where it cannot be +** advanced in either direction. In other words, the Next and Prev +** opcodes do not work after this operation. +** ** See also: NotFound, Found, NotExists */ case OP_NoConflict: /* jump, in3 */ @@ -70808,6 +73948,9 @@ assert( pOp->p4type==P4_INT32 ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); +#ifdef SQLITE_DEBUG + pC->seekOp = pOp->opcode; +#endif pIn3 = &aMem[pOp->p3]; assert( pC->pCursor!=0 ); assert( pC->isTable==0 ); @@ -70827,19 +73970,19 @@ }else{ pIdxKey = sqlite3VdbeAllocUnpackedRecord( pC->pKeyInfo, aTempRec, sizeof(aTempRec), &pFree - ); + ); if( pIdxKey==0 ) goto no_mem; assert( pIn3->flags & MEM_Blob ); - assert( (pIn3->flags & MEM_Zero)==0 ); /* zeroblobs already expanded */ + ExpandBlob(pIn3); sqlite3VdbeRecordUnpack(pC->pKeyInfo, pIn3->n, pIn3->z, pIdxKey); } pIdxKey->default_rc = 0; if( pOp->opcode==OP_NoConflict ){ /* For the OP_NoConflict opcode, take the jump if any of the ** input fields are NULL, since any key with a NULL will not ** conflict */ - for(ii=0; iinField; ii++){ + if( pIdxKey->aMem[ii].flags & MEM_Null ){ pc = pOp->p2 - 1; VdbeBranchTaken(1,2); break; } @@ -70879,6 +74022,10 @@ ** The OP_NotFound opcode performs the same operation on index btrees ** (with arbitrary multi-value keys). ** +** This opcode leaves the cursor in a state where it cannot be advanced +** in either direction. In other words, the Next and Prev opcodes will +** not work following this opcode. +** ** See also: Found, NotFound, NoConflict */ case OP_NotExists: { /* jump, in3 */ @@ -70892,29 +74039,30 @@ assert( pOp->p1>=0 && pOp->p1nCursor ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); +#ifdef SQLITE_DEBUG + pC->seekOp = 0; +#endif assert( pC->isTable ); assert( pC->pseudoTableReg==0 ); pCrsr = pC->pCursor; assert( pCrsr!=0 ); res = 0; iKey = pIn3->u.i; rc = sqlite3BtreeMovetoUnpacked(pCrsr, 0, iKey, 0, &res); - pC->lastRowid = pIn3->u.i; - pC->rowidIsValid = res==0 ?1:0; + pC->movetoTarget = iKey; /* Used by OP_Delete */ pC->nullRow = 0; pC->cacheStatus = CACHE_STALE; pC->deferredMoveto = 0; VdbeBranchTaken(res!=0,2); if( res!=0 ){ pc = pOp->p2 - 1; - assert( pC->rowidIsValid==0 ); } pC->seekResult = res; break; } /* Opcode: Sequence P1 P2 * * * -** Synopsis: r[P2]=rowid +** Synopsis: r[P2]=cursor[P1].ctr++ ** ** Find the next available sequence number for cursor P1. ** Write the sequence number into register P2. @@ -71041,32 +74189,20 @@ ** it finds one that is not previously used. */ assert( pOp->p3==0 ); /* We cannot be in random rowid mode if this is ** an AUTOINCREMENT table. */ - /* on the first attempt, simply do one more than previous */ - v = lastRowid; - v &= (MAX_ROWID>>1); /* ensure doesn't go negative */ - v++; /* ensure non-zero */ cnt = 0; - while( ((rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)v, + do{ + sqlite3_randomness(sizeof(v), &v); + v &= (MAX_ROWID>>1); v++; /* Ensure that v is greater than zero */ + }while( ((rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)v, 0, &res))==SQLITE_OK) && (res==0) - && (++cnt<100)){ - /* collision - try another random rowid */ - sqlite3_randomness(sizeof(v), &v); - if( cnt<5 ){ - /* try "small" random rowids for the initial attempts */ - v &= 0xffffff; - }else{ - v &= (MAX_ROWID>>1); /* ensure doesn't go negative */ - } - v++; /* ensure non-zero */ - } + && (++cnt<100)); if( rc==SQLITE_OK && res==0 ){ rc = SQLITE_FULL; /* IMP: R-38219-53002 */ goto abort_due_to_error; } assert( v>0 ); /* EV: R-40812-03570 */ } - pC->rowidIsValid = 0; pC->deferredMoveto = 0; pC->cacheStatus = CACHE_STALE; } @@ -71171,7 +74307,6 @@ pData->z, pData->n, nZero, (pOp->p5 & OPFLAG_APPEND)!=0, seekResult ); - pC->rowidIsValid = 0; pC->deferredMoveto = 0; pC->cacheStatus = CACHE_STALE; @@ -71194,7 +74329,7 @@ ** The cursor will be left pointing at either the next or the previous ** record in the table. If it is left pointing at the next record, then ** the next Next instruction will be a no-op. Hence it is OK to delete -** a record from within an Next loop. +** a record from within a Next loop. ** ** If the OPFLAG_NCHANGE flag of P2 is set, then the row change count is ** incremented (otherwise not). @@ -71208,33 +74343,32 @@ ** using OP_NotFound prior to invoking this opcode. */ case OP_Delete: { - i64 iKey; VdbeCursor *pC; assert( pOp->p1>=0 && pOp->p1nCursor ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); assert( pC->pCursor!=0 ); /* Only valid for real tables, no pseudotables */ - iKey = pC->lastRowid; /* Only used for the update hook */ - - /* The OP_Delete opcode always follows an OP_NotExists or OP_Last or - ** OP_Column on the same table without any intervening operations that - ** might move or invalidate the cursor. Hence cursor pC is always pointing - ** to the row to be deleted and the sqlite3VdbeCursorMoveto() operation - ** below is always a no-op and cannot fail. We will run it anyhow, though, - ** to guard against future changes to the code generator. - **/ assert( pC->deferredMoveto==0 ); - rc = sqlite3VdbeCursorMoveto(pC); - if( NEVER(rc!=SQLITE_OK) ) goto abort_due_to_error; +#ifdef SQLITE_DEBUG + /* The seek operation that positioned the cursor prior to OP_Delete will + ** have also set the pC->movetoTarget field to the rowid of the row that + ** is being deleted */ + if( pOp->p4.z && pC->isTable ){ + i64 iKey = 0; + sqlite3BtreeKeySize(pC->pCursor, &iKey); + assert( pC->movetoTarget==iKey ); + } +#endif + rc = sqlite3BtreeDelete(pC->pCursor); pC->cacheStatus = CACHE_STALE; /* Invoke the update-hook if required. */ if( rc==SQLITE_OK && db->xUpdateCallback && pOp->p4.z && pC->isTable ){ db->xUpdateCallback(db->pUpdateArg, SQLITE_DELETE, - db->aDb[pC->iDb].zName, pOp->p4.z, iKey); + db->aDb[pC->iDb].zName, pOp->p4.z, pC->movetoTarget); assert( pC->iDb>=0 ); } if( pOp->p2 & OPFLAG_NCHANGE ) p->nChange++; @@ -71254,12 +74388,12 @@ } /* Opcode: SorterCompare P1 P2 P3 P4 -** Synopsis: if key(P1)!=rtrim(r[P3],P4) goto P2 +** Synopsis: if key(P1)!=trim(r[P3],P4) goto P2 ** ** P1 is a sorter cursor. This instruction compares a prefix of the -** the record blob in register P3 against a prefix of the entry that -** the sorter cursor currently points to. The final P4 fields of both -** the P3 and sorter record are ignored. +** record blob in register P3 against a prefix of the entry that +** the sorter cursor currently points to. Only the first P4 fields +** of r[P3] and the sorter record are compared. ** ** If either P3 or the sorter contains a NULL in one of their significant ** fields (not counting the P4 fields at the end which are ignored) then @@ -71271,25 +74405,33 @@ case OP_SorterCompare: { VdbeCursor *pC; int res; - int nIgnore; + int nKeyCol; pC = p->apCsr[pOp->p1]; assert( isSorter(pC) ); assert( pOp->p4type==P4_INT32 ); pIn3 = &aMem[pOp->p3]; - nIgnore = pOp->p4.i; - rc = sqlite3VdbeSorterCompare(pC, pIn3, nIgnore, &res); + nKeyCol = pOp->p4.i; + res = 0; + rc = sqlite3VdbeSorterCompare(pC, pIn3, nKeyCol, &res); VdbeBranchTaken(res!=0,2); if( res ){ pc = pOp->p2-1; } break; }; -/* Opcode: SorterData P1 P2 * * * +/* Opcode: SorterData P1 P2 P3 * * ** Synopsis: r[P2]=data ** ** Write into register P2 the current sorter data for sorter cursor P1. +** Then clear the column header cache on cursor P3. +** +** This opcode is normally use to move a record out of the sorter and into +** a register that is the source for a pseudo-table cursor created using +** OpenPseudo. That pseudo-table cursor is the one that is identified by +** parameter P3. Clearing the P3 column cache as part of this opcode saves +** us from having to issue a separate NullRow instruction to clear that cache. */ case OP_SorterData: { VdbeCursor *pC; @@ -71298,6 +74440,9 @@ pC = p->apCsr[pOp->p1]; assert( isSorter(pC) ); rc = sqlite3VdbeSorterRowkey(pC, pOut); + assert( rc!=SQLITE_OK || (pOut->flags & MEM_Blob) ); + assert( pOp->p1>=0 && pOp->p1nCursor ); + p->apCsr[pOp->p3]->cacheStatus = CACHE_STALE; break; } @@ -71344,16 +74489,20 @@ assert( pC->pseudoTableReg==0 ); assert( pC->pCursor!=0 ); pCrsr = pC->pCursor; - assert( sqlite3BtreeCursorIsValid(pCrsr) ); /* The OP_RowKey and OP_RowData opcodes always follow OP_NotExists or ** OP_Rewind/Op_Next with no intervening instructions that might invalidate - ** the cursor. Hence the following sqlite3VdbeCursorMoveto() call is always - ** a no-op and can never fail. But we leave it in place as a safety. + ** the cursor. If this where not the case, on of the following assert()s + ** would fail. Should this ever change (because of changes in the code + ** generator) then the fix would be to insert a call to + ** sqlite3VdbeCursorMoveto(). */ assert( pC->deferredMoveto==0 ); + assert( sqlite3BtreeCursorIsValid(pCrsr) ); +#if 0 /* Not required due to the previous to assert() statements */ rc = sqlite3VdbeCursorMoveto(pC); - if( NEVER(rc!=SQLITE_OK) ) goto abort_due_to_error; + if( rc!=SQLITE_OK ) goto abort_due_to_error; +#endif if( pC->isTable==0 ){ assert( !pC->isTable ); @@ -71370,7 +74519,8 @@ goto too_big; } } - if( sqlite3VdbeMemGrow(pOut, n, 0) ){ + testcase( n==0 ); + if( sqlite3VdbeMemClearAndResize(pOut, MAX(n,32)) ){ goto no_mem; } pOut->n = n; @@ -71421,14 +74571,14 @@ #endif /* SQLITE_OMIT_VIRTUALTABLE */ }else{ assert( pC->pCursor!=0 ); - rc = sqlite3VdbeCursorMoveto(pC); + rc = sqlite3VdbeCursorRestore(pC); if( rc ) goto abort_due_to_error; - if( pC->rowidIsValid ){ - v = pC->lastRowid; - }else{ - rc = sqlite3BtreeKeySize(pC->pCursor, &v); - assert( rc==SQLITE_OK ); /* Always so because of CursorMoveto() above */ + if( pC->nullRow ){ + pOut->flags = MEM_Null; + break; } + rc = sqlite3BtreeKeySize(pC->pCursor, &v); + assert( rc==SQLITE_OK ); /* Always so because of CursorRestore() above */ } pOut->u.i = v; break; @@ -71447,7 +74597,6 @@ pC = p->apCsr[pOp->p1]; assert( pC!=0 ); pC->nullRow = 1; - pC->rowidIsValid = 0; pC->cacheStatus = CACHE_STALE; if( pC->pCursor ){ sqlite3BtreeClearCursor(pC->pCursor); @@ -71457,11 +74606,15 @@ /* Opcode: Last P1 P2 * * * ** -** The next use of the Rowid or Column or Next instruction for P1 +** The next use of the Rowid or Column or Prev instruction for P1 ** will refer to the last entry in the database table or index. ** If the table or index is empty and P2>0, then jump immediately to P2. ** If P2 is 0 or if the table or index is not empty, fall through ** to the following instruction. +** +** This opcode leaves the cursor configured to move in reverse order, +** from the end toward the beginning. In other words, the cursor is +** configured to use Prev, not Next. */ case OP_Last: { /* jump */ VdbeCursor *pC; @@ -71477,8 +74630,10 @@ rc = sqlite3BtreeLast(pCrsr, &res); pC->nullRow = (u8)res; pC->deferredMoveto = 0; - pC->rowidIsValid = 0; pC->cacheStatus = CACHE_STALE; +#ifdef SQLITE_DEBUG + pC->seekOp = OP_Last; +#endif if( pOp->p2>0 ){ VdbeBranchTaken(res!=0,2); if( res ) pc = pOp->p2 - 1; @@ -71512,9 +74667,13 @@ ** ** The next use of the Rowid or Column or Next instruction for P1 ** will refer to the first entry in the database table or index. -** If the table or index is empty and P2>0, then jump immediately to P2. -** If P2 is 0 or if the table or index is not empty, fall through -** to the following instruction. +** If the table or index is empty, jump immediately to P2. +** If the table or index is not empty, fall through to the following +** instruction. +** +** This opcode leaves the cursor configured to move in forward order, +** from the beginning toward the end. In other words, the cursor is +** configured to use Next, not Prev. */ case OP_Rewind: { /* jump */ VdbeCursor *pC; @@ -71526,15 +74685,17 @@ assert( pC!=0 ); assert( isSorter(pC)==(pOp->opcode==OP_SorterSort) ); res = 1; +#ifdef SQLITE_DEBUG + pC->seekOp = OP_Rewind; +#endif if( isSorter(pC) ){ - rc = sqlite3VdbeSorterRewind(db, pC, &res); + rc = sqlite3VdbeSorterRewind(pC, &res); }else{ pCrsr = pC->pCursor; assert( pCrsr ); rc = sqlite3BtreeFirst(pCrsr, &res); pC->deferredMoveto = 0; pC->cacheStatus = CACHE_STALE; - pC->rowidIsValid = 0; } pC->nullRow = (u8)res; assert( pOp->p2>0 && pOp->p2nOp ); @@ -71552,6 +74713,10 @@ ** to the following instruction. But if the cursor advance was successful, ** jump immediately to P2. ** +** The Next opcode is only valid following an SeekGT, SeekGE, or +** OP_Rewind opcode used to position the cursor. Next is not allowed +** to follow SeekLT, SeekLE, or OP_Last. +** ** The P1 cursor must be for a real table, not a pseudo-table. P1 must have ** been opened prior to this opcode or the program will segfault. ** @@ -71570,7 +74735,7 @@ */ /* Opcode: NextIfOpen P1 P2 P3 P4 P5 ** -** This opcode works just like OP_Next except that if cursor P1 is not +** This opcode works just like Next except that if cursor P1 is not ** open it behaves a no-op. */ /* Opcode: Prev P1 P2 P3 P4 P5 @@ -71580,6 +74745,11 @@ ** to the following instruction. But if the cursor backup was successful, ** jump immediately to P2. ** +** +** The Prev opcode is only valid following an SeekLT, SeekLE, or +** OP_Last opcode used to position the cursor. Prev is not allowed +** to follow SeekGT, SeekGE, or OP_Rewind. +** ** The P1 cursor must be for a real table, not a pseudo-table. If P1 is ** not open then the behavior is undefined. ** @@ -71596,7 +74766,7 @@ */ /* Opcode: PrevIfOpen P1 P2 P3 P4 P5 ** -** This opcode works just like OP_Prev except that if cursor P1 is not +** This opcode works just like Prev except that if cursor P1 is not ** open it behaves a no-op. */ case OP_SorterNext: { /* jump */ @@ -71605,6 +74775,7 @@ pC = p->apCsr[pOp->p1]; assert( isSorter(pC) ); + res = 0; rc = sqlite3VdbeSorterNext(db, pC, &res); goto next_tail; case OP_PrevIfOpen: /* jump */ @@ -71626,6 +74797,16 @@ assert( pOp->opcode!=OP_Prev || pOp->p4.xAdvance==sqlite3BtreePrevious ); assert( pOp->opcode!=OP_NextIfOpen || pOp->p4.xAdvance==sqlite3BtreeNext ); assert( pOp->opcode!=OP_PrevIfOpen || pOp->p4.xAdvance==sqlite3BtreePrevious); + + /* The Next opcode is only used after SeekGT, SeekGE, and Rewind. + ** The Prev opcode is only used after SeekLT, SeekLE, and Last. */ + assert( pOp->opcode!=OP_Next || pOp->opcode!=OP_NextIfOpen + || pC->seekOp==OP_SeekGT || pC->seekOp==OP_SeekGE + || pC->seekOp==OP_Rewind || pC->seekOp==OP_Found); + assert( pOp->opcode!=OP_Prev || pOp->opcode!=OP_PrevIfOpen + || pC->seekOp==OP_SeekLT || pC->seekOp==OP_SeekLE + || pC->seekOp==OP_Last ); + rc = pOp->p4.xAdvance(pC->pCursor, &res); next_tail: pC->cacheStatus = CACHE_STALE; @@ -71640,7 +74821,6 @@ }else{ pC->nullRow = 1; } - pC->rowidIsValid = 0; goto check_for_interrupt; } @@ -71685,7 +74865,7 @@ rc = ExpandBlob(pIn2); if( rc==SQLITE_OK ){ if( isSorter(pC) ){ - rc = sqlite3VdbeSorterWrite(db, pC, pIn2); + rc = sqlite3VdbeSorterWrite(pC, pIn2); }else{ nKey = pIn2->n; zKey = pIn2->z; @@ -71756,10 +74936,16 @@ pCrsr = pC->pCursor; assert( pCrsr!=0 ); pOut->flags = MEM_Null; - rc = sqlite3VdbeCursorMoveto(pC); - if( NEVER(rc) ) goto abort_due_to_error; - assert( pC->deferredMoveto==0 ); assert( pC->isTable==0 ); + assert( pC->deferredMoveto==0 ); + + /* sqlite3VbeCursorRestore() can only fail if the record has been deleted + ** out from under the cursor. That will never happend for an IdxRowid + ** opcode, hence the NEVER() arround the check of the return value. + */ + rc = sqlite3VdbeCursorRestore(pC); + if( NEVER(rc!=SQLITE_OK) ) goto abort_due_to_error; + if( !pC->nullRow ){ rowid = 0; /* Not needed. Only used to silence a warning. */ rc = sqlite3VdbeIdxRowid(db, pCrsr, &rowid); @@ -71846,7 +75032,7 @@ { int i; for(i=0; iopcode&1)==(OP_IdxLT&1) ){ assert( pOp->opcode==OP_IdxLE || pOp->opcode==OP_IdxLT ); @@ -71908,7 +75094,7 @@ }else{ iDb = pOp->p3; assert( iCnt==1 ); - assert( (p->btreeMask & (((yDbMask)1)<btreeMask, iDb) ); iMoved = 0; /* Not needed. Only to silence a warning. */ rc = sqlite3BtreeDropTable(db->aDb[iDb].pBt, pOp->p1, &iMoved); pOut->flags = MEM_Int; @@ -71948,7 +75134,7 @@ nChange = 0; assert( p->readOnly==0 ); - assert( (p->btreeMask & (((yDbMask)1)<p2))!=0 ); + assert( DbMaskTest(p->btreeMask, pOp->p2) ); rc = sqlite3BtreeClearTable( db->aDb[pOp->p2].pBt, pOp->p1, (pOp->p3 ? &nChange : 0) ); @@ -71963,6 +75149,29 @@ break; } +/* Opcode: ResetSorter P1 * * * * +** +** Delete all contents from the ephemeral table or sorter +** that is open on cursor P1. +** +** This opcode only works for cursors used for sorting and +** opened with OP_OpenEphemeral or OP_SorterOpen. +*/ +case OP_ResetSorter: { + VdbeCursor *pC; + + assert( pOp->p1>=0 && pOp->p1nCursor ); + pC = p->apCsr[pOp->p1]; + assert( pC!=0 ); + if( pC->pSorter ){ + sqlite3VdbeSorterReset(db, pC->pSorter); + }else{ + assert( pC->isEphemeral ); + rc = sqlite3BtreeClearTableOfCursor(pC->pCursor); + } + break; +} + /* Opcode: CreateTable P1 P2 * * * ** Synopsis: r[P2]=root iDb=P1 ** @@ -71995,7 +75204,7 @@ pgno = 0; assert( pOp->p1>=0 && pOp->p1nDb ); - assert( (p->btreeMask & (((yDbMask)1)<p1))!=0 ); + assert( DbMaskTest(p->btreeMask, pOp->p1) ); assert( p->readOnly==0 ); pDb = &db->aDb[pOp->p1]; assert( pDb->pBt!=0 ); @@ -72083,7 +75292,8 @@ ** ** Remove the internal (in-memory) data structures that describe ** the table named P4 in database P1. This is called after a table -** is dropped in order to keep the internal representation of the +** is dropped from disk (using the Destroy opcode) in order to keep +** the internal representation of the ** schema consistent with what is on disk. */ case OP_DropTable: { @@ -72095,7 +75305,8 @@ ** ** Remove the internal (in-memory) data structures that describe ** the index named P4 in database P1. This is called after an index -** is dropped in order to keep the internal representation of the +** is dropped from disk (using the Destroy opcode) +** in order to keep the internal representation of the ** schema consistent with what is on disk. */ case OP_DropIndex: { @@ -72107,7 +75318,8 @@ ** ** Remove the internal (in-memory) data structures that describe ** the trigger named P4 in database P1. This is called after a trigger -** is dropped in order to keep the internal representation of the +** is dropped from disk (using the Destroy opcode) in order to keep +** the internal representation of the ** schema consistent with what is on disk. */ case OP_DropTrigger: { @@ -72160,7 +75372,7 @@ } aRoot[j] = 0; assert( pOp->p5nDb ); - assert( (p->btreeMask & (((yDbMask)1)<p5))!=0 ); + assert( DbMaskTest(p->btreeMask, pOp->p5) ); z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, aRoot, nRoot, (int)pnErr->u.i, &nErr); sqlite3DbFree(db, aRoot); @@ -72269,9 +75481,7 @@ assert( pOp->p4type==P4_INT32 ); assert( iSet==-1 || iSet>=0 ); if( iSet ){ - exists = sqlite3RowSetTest(pIn1->u.pRowSet, - (u8)(iSet>=0 ? iSet & 0xf : 0xff), - pIn3->u.i); + exists = sqlite3RowSetTest(pIn1->u.pRowSet, iSet, pIn3->u.i); VdbeBranchTaken(exists!=0,2); if( exists ){ pc = pOp->p2 - 1; @@ -72375,6 +75585,9 @@ pFrame->token = pProgram->token; pFrame->aOnceFlag = p->aOnceFlag; pFrame->nOnceFlag = p->nOnceFlag; +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + pFrame->anExec = p->anExec; +#endif pEnd = &VdbeFrameMem(pFrame)[pFrame->nChildMem]; for(pMem=VdbeFrameMem(pFrame); pMem!=pEnd; pMem++){ @@ -72392,6 +75605,7 @@ pFrame->pParent = p->pFrame; pFrame->lastRowid = lastRowid; pFrame->nChange = p->nChange; + pFrame->nDbChange = p->db->nChange; p->nChange = 0; p->pFrame = pFrame; p->aMem = aMem = &VdbeFrameMem(pFrame)[-1]; @@ -72402,6 +75616,9 @@ p->nOp = pProgram->nOp; p->aOnceFlag = (u8 *)&p->apCsr[p->nCursor]; p->nOnceFlag = pProgram->nOnce; +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + p->anExec = 0; +#endif pc = -1; memset(p->aOnceFlag, 0, p->nOnceFlag); @@ -72524,17 +75741,16 @@ break; } -/* Opcode: IfNeg P1 P2 * * * -** Synopsis: if r[P1]<0 goto P2 +/* Opcode: IfNeg P1 P2 P3 * * +** Synopsis: r[P1]+=P3, if r[P1]<0 goto P2 ** -** If the value of register P1 is less than zero, jump to P2. -** -** It is illegal to use this instruction on a register that does -** not contain an integer. An assertion fault will result if you try. +** Register P1 must contain an integer. Add literal P3 to the value in +** register P1 then if the value of register P1 is less than zero, jump to P2. */ case OP_IfNeg: { /* jump, in1 */ pIn1 = &aMem[pOp->p1]; assert( pIn1->flags&MEM_Int ); + pIn1->u.i += pOp->p3; VdbeBranchTaken(pIn1->u.i<0, 2); if( pIn1->u.i<0 ){ pc = pOp->p2 - 1; @@ -72547,9 +75763,6 @@ ** ** The register P1 must contain an integer. Add literal P3 to the ** value in register P1. If the result is exactly 0, jump to P2. -** -** It is illegal to use this instruction on a register that does -** not contain an integer. An assertion fault will result if you try. */ case OP_IfZero: { /* jump, in1 */ pIn1 = &aMem[pOp->p1]; @@ -72578,6 +75791,7 @@ int i; Mem *pMem; Mem *pRec; + Mem t; sqlite3_context ctx; sqlite3_value **apVal; @@ -72595,33 +75809,23 @@ assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) ); ctx.pMem = pMem = &aMem[pOp->p3]; pMem->n++; - ctx.s.flags = MEM_Null; - ctx.s.z = 0; - ctx.s.zMalloc = 0; - ctx.s.xDel = 0; - ctx.s.db = db; + sqlite3VdbeMemInit(&t, db, MEM_Null); + ctx.pOut = &t; ctx.isError = 0; - ctx.pColl = 0; + ctx.pVdbe = p; + ctx.iOp = pc; ctx.skipFlag = 0; - if( ctx.pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL ){ - assert( pOp>p->aOp ); - assert( pOp[-1].p4type==P4_COLLSEQ ); - assert( pOp[-1].opcode==OP_CollSeq ); - ctx.pColl = pOp[-1].p4.pColl; - } (ctx.pFunc->xStep)(&ctx, n, apVal); /* IMP: R-24505-23230 */ if( ctx.isError ){ - sqlite3SetString(&p->zErrMsg, db, "%s", sqlite3_value_text(&ctx.s)); + sqlite3SetString(&p->zErrMsg, db, "%s", sqlite3_value_text(&t)); rc = ctx.isError; } if( ctx.skipFlag ){ assert( pOp[-1].opcode==OP_CollSeq ); i = pOp[-1].p1; if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1); } - - sqlite3VdbeMemRelease(&ctx.s); - + sqlite3VdbeMemRelease(&t); break; } @@ -72659,8 +75863,8 @@ /* Opcode: Checkpoint P1 P2 P3 * * ** ** Checkpoint database P1. This is a no-op if P1 is not currently in -** WAL mode. Parameter P2 is one of SQLITE_CHECKPOINT_PASSIVE, FULL -** or RESTART. Write 1 or 0 into mem[P3] if the checkpoint returns +** WAL mode. Parameter P2 is one of SQLITE_CHECKPOINT_PASSIVE, FULL, +** RESTART, or TRUNCATE. Write 1 or 0 into mem[P3] if the checkpoint returns ** SQLITE_BUSY or not, respectively. Write the number of pages in the ** WAL after the checkpoint into mem[P3+1] and the number of pages ** in the WAL that have been checkpointed after the checkpoint @@ -72678,6 +75882,7 @@ assert( pOp->p2==SQLITE_CHECKPOINT_PASSIVE || pOp->p2==SQLITE_CHECKPOINT_FULL || pOp->p2==SQLITE_CHECKPOINT_RESTART + || pOp->p2==SQLITE_CHECKPOINT_TRUNCATE ); rc = sqlite3Checkpoint(db, pOp->p1, pOp->p2, &aRes[1], &aRes[2]); if( rc==SQLITE_BUSY ){ @@ -72822,7 +76027,7 @@ Btree *pBt; assert( pOp->p1>=0 && pOp->p1nDb ); - assert( (p->btreeMask & (((yDbMask)1)<p1))!=0 ); + assert( DbMaskTest(p->btreeMask, pOp->p1) ); assert( p->readOnly==0 ); pBt = db->aDb[pOp->p1].pBt; rc = sqlite3BtreeIncrVacuum(pBt); @@ -72837,12 +76042,13 @@ /* Opcode: Expire P1 * * * * ** -** Cause precompiled statements to become expired. An expired statement -** fails with an error code of SQLITE_SCHEMA if it is ever executed -** (via sqlite3_step()). +** Cause precompiled statements to expire. When an expired statement +** is executed using sqlite3_step() it will either automatically +** reprepare itself (if it was originally created using sqlite3_prepare_v2()) +** or it will fail with SQLITE_SCHEMA. ** ** If P1 is 0, then all SQL statements become expired. If P1 is non-zero, -** then only the currently executing statement is affected. +** then only the currently executing statement is expired. */ case OP_Expire: { if( !pOp->p1 ){ @@ -72874,7 +76080,7 @@ if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommitted) ){ int p1 = pOp->p1; assert( p1>=0 && p1nDb ); - assert( (p->btreeMask & (((yDbMask)1)<btreeMask, p1) ); assert( isWriteLock==0 || isWriteLock==1 ); rc = sqlite3BtreeLockTable(db->aDb[p1].pBt, pOp->p2, isWriteLock); if( (rc&0xFF)==SQLITE_LOCKED ){ @@ -72971,7 +76177,7 @@ #ifndef SQLITE_OMIT_VIRTUALTABLE /* Opcode: VFilter P1 P2 P3 P4 * -** Synopsis: iPlan=r[P3] zPlan='P4' +** Synopsis: iplan=r[P3] zplan='P4' ** ** P1 is a cursor opened using VOpen. P2 is an address to jump to if ** the filtered result set is empty. @@ -73070,27 +76276,14 @@ pModule = pVtab->pModule; assert( pModule->xColumn ); memset(&sContext, 0, sizeof(sContext)); - - /* The output cell may already have a buffer allocated. Move - ** the current contents to sContext.s so in case the user-function - ** can use the already allocated buffer instead of allocating a - ** new one. - */ - sqlite3VdbeMemMove(&sContext.s, pDest); - MemSetTypeFlag(&sContext.s, MEM_Null); - + sContext.pOut = pDest; + MemSetTypeFlag(pDest, MEM_Null); rc = pModule->xColumn(pCur->pVtabCursor, &sContext, pOp->p2); sqlite3VtabImportErrmsg(p, pVtab); if( sContext.isError ){ rc = sContext.isError; } - - /* Copy the result of the function to the P3 register. We - ** do this regardless of whether or not an error occurred to ensure any - ** dynamic allocation in sContext.s (a Mem struct) is released. - */ - sqlite3VdbeChangeEncoding(&sContext.s, encoding); - sqlite3VdbeMemMove(pDest, &sContext.s); + sqlite3VdbeChangeEncoding(pDest, encoding); REGISTER_TRACE(pOp->p3, pDest); UPDATE_MAX_BLOBSIZE(pDest); @@ -73324,7 +76517,7 @@ if( zTrace ){ int i; for(i=0; inDb; i++){ - if( MASKBIT(i) & p->btreeMask)==0 ) continue; + if( DbMaskTest(p->btreeMask, i)==0 ) continue; sqlite3_file_control(db, db->aDb[i].zName, SQLITE_FCNTL_TRACE, zTrace); } } @@ -73367,8 +76560,8 @@ #ifdef VDBE_PROFILE { - u64 elapsed = sqlite3Hwtime() - start; - pOp->cycles += elapsed; + u64 endTime = sqlite3Hwtime(); + if( endTime>start ) pOp->cycles += endTime - start; pOp->cnt++; } #endif @@ -73539,9 +76732,7 @@ p->iOffset = pC->aType[p->iCol + pC->nField]; p->nByte = sqlite3VdbeSerialTypeLen(type); p->pCsr = pC->pCursor; - sqlite3BtreeEnterCursor(p->pCsr); - sqlite3BtreeCacheOverflow(p->pCsr); - sqlite3BtreeLeaveCursor(p->pCsr); + sqlite3BtreeIncrblobCursor(p->pCsr); } } @@ -73617,6 +76808,11 @@ Parse *pParse = 0; Incrblob *pBlob = 0; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || ppBlob==0 || zTable==0 ){ + return SQLITE_MISUSE_BKPT; + } +#endif flags = !!flags; /* flags = (flags ? 1 : 0); */ *ppBlob = 0; @@ -73782,7 +76978,7 @@ if( pBlob && pBlob->pStmt ) sqlite3VdbeFinalize((Vdbe *)pBlob->pStmt); sqlite3DbFree(db, pBlob); } - sqlite3Error(db, rc, (zErr ? "%s" : 0), zErr); + sqlite3ErrorWithMsg(db, rc, (zErr ? "%s" : 0), zErr); sqlite3DbFree(db, zErr); sqlite3ParserReset(pParse); sqlite3StackFree(db, pParse); @@ -73835,7 +77031,6 @@ if( n<0 || iOffset<0 || (iOffset+n)>p->nByte ){ /* Request is out of range. Return a transient error. */ rc = SQLITE_ERROR; - sqlite3Error(db, SQLITE_ERROR, 0); }else if( v==0 ){ /* If there is no statement handle, then the blob-handle has ** already been invalidated. Return SQLITE_ABORT in this case. @@ -73853,10 +77048,10 @@ sqlite3VdbeFinalize(v); p->pStmt = 0; }else{ - db->errCode = rc; v->rc = rc; } } + sqlite3Error(db, rc); rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; @@ -73915,7 +77110,7 @@ char *zErr; rc = blobSeekToRow(p, iRow, &zErr); if( rc!=SQLITE_OK ){ - sqlite3Error(db, rc, (zErr ? "%s" : 0), zErr); + sqlite3ErrorWithMsg(db, rc, (zErr ? "%s" : 0), zErr); sqlite3DbFree(db, zErr); } assert( rc!=SQLITE_SCHEMA ); @@ -73932,7 +77127,7 @@ /************** End of vdbeblob.c ********************************************/ /************** Begin file vdbesort.c ****************************************/ /* -** 2011 July 9 +** 2011-07-09 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -73943,77 +77138,238 @@ ** ************************************************************************* ** This file contains code for the VdbeSorter object, used in concert with -** a VdbeCursor to sort large numbers of keys (as may be required, for -** example, by CREATE INDEX statements on tables too large to fit in main -** memory). +** a VdbeCursor to sort large numbers of keys for CREATE INDEX statements +** or by SELECT statements with ORDER BY clauses that cannot be satisfied +** using indexes and without LIMIT clauses. +** +** The VdbeSorter object implements a multi-threaded external merge sort +** algorithm that is efficient even if the number of elements being sorted +** exceeds the available memory. +** +** Here is the (internal, non-API) interface between this module and the +** rest of the SQLite system: +** +** sqlite3VdbeSorterInit() Create a new VdbeSorter object. +** +** sqlite3VdbeSorterWrite() Add a single new row to the VdbeSorter +** object. The row is a binary blob in the +** OP_MakeRecord format that contains both +** the ORDER BY key columns and result columns +** in the case of a SELECT w/ ORDER BY, or +** the complete record for an index entry +** in the case of a CREATE INDEX. +** +** sqlite3VdbeSorterRewind() Sort all content previously added. +** Position the read cursor on the +** first sorted element. +** +** sqlite3VdbeSorterNext() Advance the read cursor to the next sorted +** element. +** +** sqlite3VdbeSorterRowkey() Return the complete binary blob for the +** row currently under the read cursor. +** +** sqlite3VdbeSorterCompare() Compare the binary blob for the row +** currently under the read cursor against +** another binary blob X and report if +** X is strictly less than the read cursor. +** Used to enforce uniqueness in a +** CREATE UNIQUE INDEX statement. +** +** sqlite3VdbeSorterClose() Close the VdbeSorter object and reclaim +** all resources. +** +** sqlite3VdbeSorterReset() Refurbish the VdbeSorter for reuse. This +** is like Close() followed by Init() only +** much faster. +** +** The interfaces above must be called in a particular order. Write() can +** only occur in between Init()/Reset() and Rewind(). Next(), Rowkey(), and +** Compare() can only occur in between Rewind() and Close()/Reset(). i.e. +** +** Init() +** for each record: Write() +** Rewind() +** Rowkey()/Compare() +** Next() +** Close() +** +** Algorithm: +** +** Records passed to the sorter via calls to Write() are initially held +** unsorted in main memory. Assuming the amount of memory used never exceeds +** a threshold, when Rewind() is called the set of records is sorted using +** an in-memory merge sort. In this case, no temporary files are required +** and subsequent calls to Rowkey(), Next() and Compare() read records +** directly from main memory. +** +** If the amount of space used to store records in main memory exceeds the +** threshold, then the set of records currently in memory are sorted and +** written to a temporary file in "Packed Memory Array" (PMA) format. +** A PMA created at this point is known as a "level-0 PMA". Higher levels +** of PMAs may be created by merging existing PMAs together - for example +** merging two or more level-0 PMAs together creates a level-1 PMA. +** +** The threshold for the amount of main memory to use before flushing +** records to a PMA is roughly the same as the limit configured for the +** page-cache of the main database. Specifically, the threshold is set to +** the value returned by "PRAGMA main.page_size" multipled by +** that returned by "PRAGMA main.cache_size", in bytes. +** +** If the sorter is running in single-threaded mode, then all PMAs generated +** are appended to a single temporary file. Or, if the sorter is running in +** multi-threaded mode then up to (N+1) temporary files may be opened, where +** N is the configured number of worker threads. In this case, instead of +** sorting the records and writing the PMA to a temporary file itself, the +** calling thread usually launches a worker thread to do so. Except, if +** there are already N worker threads running, the main thread does the work +** itself. +** +** The sorter is running in multi-threaded mode if (a) the library was built +** with pre-processor symbol SQLITE_MAX_WORKER_THREADS set to a value greater +** than zero, and (b) worker threads have been enabled at runtime by calling +** "PRAGMA threads=N" with some value of N greater than 0. +** +** When Rewind() is called, any data remaining in memory is flushed to a +** final PMA. So at this point the data is stored in some number of sorted +** PMAs within temporary files on disk. +** +** If there are fewer than SORTER_MAX_MERGE_COUNT PMAs in total and the +** sorter is running in single-threaded mode, then these PMAs are merged +** incrementally as keys are retreived from the sorter by the VDBE. The +** MergeEngine object, described in further detail below, performs this +** merge. +** +** Or, if running in multi-threaded mode, then a background thread is +** launched to merge the existing PMAs. Once the background thread has +** merged T bytes of data into a single sorted PMA, the main thread +** begins reading keys from that PMA while the background thread proceeds +** with merging the next T bytes of data. And so on. +** +** Parameter T is set to half the value of the memory threshold used +** by Write() above to determine when to create a new PMA. +** +** If there are more than SORTER_MAX_MERGE_COUNT PMAs in total when +** Rewind() is called, then a hierarchy of incremental-merges is used. +** First, T bytes of data from the first SORTER_MAX_MERGE_COUNT PMAs on +** disk are merged together. Then T bytes of data from the second set, and +** so on, such that no operation ever merges more than SORTER_MAX_MERGE_COUNT +** PMAs at a time. This done is to improve locality. +** +** If running in multi-threaded mode and there are more than +** SORTER_MAX_MERGE_COUNT PMAs on disk when Rewind() is called, then more +** than one background thread may be created. Specifically, there may be +** one background thread for each temporary file on disk, and one background +** thread to merge the output of each of the others to a single PMA for +** the main thread to read from. */ +/* +** If SQLITE_DEBUG_SORTER_THREADS is defined, this module outputs various +** messages to stderr that may be helpful in understanding the performance +** characteristics of the sorter in multi-threaded mode. +*/ +#if 0 +# define SQLITE_DEBUG_SORTER_THREADS 1 +#endif +/* +** Hard-coded maximum amount of data to accumulate in memory before flushing +** to a level 0 PMA. The purpose of this limit is to prevent various integer +** overflows. 512MiB. +*/ +#define SQLITE_MAX_PMASZ (1<<29) -typedef struct VdbeSorterIter VdbeSorterIter; -typedef struct SorterRecord SorterRecord; -typedef struct FileWriter FileWriter; +/* +** Private objects used by the sorter +*/ +typedef struct MergeEngine MergeEngine; /* Merge PMAs together */ +typedef struct PmaReader PmaReader; /* Incrementally read one PMA */ +typedef struct PmaWriter PmaWriter; /* Incrementally write one PMA */ +typedef struct SorterRecord SorterRecord; /* A record being sorted */ +typedef struct SortSubtask SortSubtask; /* A sub-task in the sort process */ +typedef struct SorterFile SorterFile; /* Temporary file object wrapper */ +typedef struct SorterList SorterList; /* In-memory list of records */ +typedef struct IncrMerger IncrMerger; /* Read & merge multiple PMAs */ /* -** NOTES ON DATA STRUCTURE USED FOR N-WAY MERGES: +** A container for a temp file handle and the current amount of data +** stored in the file. +*/ +struct SorterFile { + sqlite3_file *pFd; /* File handle */ + i64 iEof; /* Bytes of data stored in pFd */ +}; + +/* +** An in-memory list of objects to be sorted. ** -** As keys are added to the sorter, they are written to disk in a series -** of sorted packed-memory-arrays (PMAs). The size of each PMA is roughly -** the same as the cache-size allowed for temporary databases. In order -** to allow the caller to extract keys from the sorter in sorted order, -** all PMAs currently stored on disk must be merged together. This comment -** describes the data structure used to do so. The structure supports -** merging any number of arrays in a single pass with no redundant comparison -** operations. +** If aMemory==0 then each object is allocated separately and the objects +** are connected using SorterRecord.u.pNext. If aMemory!=0 then all objects +** are stored in the aMemory[] bulk memory, one right after the other, and +** are connected using SorterRecord.u.iNext. +*/ +struct SorterList { + SorterRecord *pList; /* Linked list of records */ + u8 *aMemory; /* If non-NULL, bulk memory to hold pList */ + int szPMA; /* Size of pList as PMA in bytes */ +}; + +/* +** The MergeEngine object is used to combine two or more smaller PMAs into +** one big PMA using a merge operation. Separate PMAs all need to be +** combined into one big PMA in order to be able to step through the sorted +** records in order. ** -** The aIter[] array contains an iterator for each of the PMAs being merged. -** An aIter[] iterator either points to a valid key or else is at EOF. For -** the purposes of the paragraphs below, we assume that the array is actually -** N elements in size, where N is the smallest power of 2 greater to or equal -** to the number of iterators being merged. The extra aIter[] elements are -** treated as if they are empty (always at EOF). +** The aReadr[] array contains a PmaReader object for each of the PMAs being +** merged. An aReadr[] object either points to a valid key or else is at EOF. +** ("EOF" means "End Of File". When aReadr[] is at EOF there is no more data.) +** For the purposes of the paragraphs below, we assume that the array is +** actually N elements in size, where N is the smallest power of 2 greater +** to or equal to the number of PMAs being merged. The extra aReadr[] elements +** are treated as if they are empty (always at EOF). ** ** The aTree[] array is also N elements in size. The value of N is stored in -** the VdbeSorter.nTree variable. +** the MergeEngine.nTree variable. ** ** The final (N/2) elements of aTree[] contain the results of comparing -** pairs of iterator keys together. Element i contains the result of -** comparing aIter[2*i-N] and aIter[2*i-N+1]. Whichever key is smaller, the +** pairs of PMA keys together. Element i contains the result of +** comparing aReadr[2*i-N] and aReadr[2*i-N+1]. Whichever key is smaller, the ** aTree element is set to the index of it. ** ** For the purposes of this comparison, EOF is considered greater than any ** other key value. If the keys are equal (only possible with two EOF ** values), it doesn't matter which index is stored. ** ** The (N/4) elements of aTree[] that precede the final (N/2) described -** above contains the index of the smallest of each block of 4 iterators. -** And so on. So that aTree[1] contains the index of the iterator that +** above contains the index of the smallest of each block of 4 PmaReaders +** And so on. So that aTree[1] contains the index of the PmaReader that ** currently points to the smallest key value. aTree[0] is unused. ** ** Example: ** -** aIter[0] -> Banana -** aIter[1] -> Feijoa -** aIter[2] -> Elderberry -** aIter[3] -> Currant -** aIter[4] -> Grapefruit -** aIter[5] -> Apple -** aIter[6] -> Durian -** aIter[7] -> EOF +** aReadr[0] -> Banana +** aReadr[1] -> Feijoa +** aReadr[2] -> Elderberry +** aReadr[3] -> Currant +** aReadr[4] -> Grapefruit +** aReadr[5] -> Apple +** aReadr[6] -> Durian +** aReadr[7] -> EOF ** ** aTree[] = { X, 5 0, 5 0, 3, 5, 6 } ** ** The current element is "Apple" (the value of the key indicated by -** iterator 5). When the Next() operation is invoked, iterator 5 will +** PmaReader 5). When the Next() operation is invoked, PmaReader 5 will ** be advanced to the next key in its segment. Say the next key is ** "Eggplant": ** -** aIter[5] -> Eggplant +** aReadr[5] -> Eggplant ** -** The contents of aTree[] are updated first by comparing the new iterator -** 5 key to the current key of iterator 4 (still "Grapefruit"). The iterator +** The contents of aTree[] are updated first by comparing the new PmaReader +** 5 key to the current key of PmaReader 4 (still "Grapefruit"). The PmaReader ** 5 value is still smaller, so aTree[6] is set to 5. And so on up the tree. -** The value of iterator 6 - "Durian" - is now smaller than that of iterator +** The value of PmaReader 6 - "Durian" - is now smaller than that of PmaReader ** 5, so aTree[3] is set to 6. Key 0 is smaller than key 6 (Bananafile2. And instead of using a +** background thread to prepare data for the PmaReader, with a single +** threaded IncrMerger the allocate part of pTask->file2 is "refilled" with +** keys from pMerger by the calling thread whenever the PmaReader runs out +** of data. */ -struct FileWriter { +struct IncrMerger { + SortSubtask *pTask; /* Task that owns this merger */ + MergeEngine *pMerger; /* Merge engine thread reads data from */ + i64 iStartOff; /* Offset to start writing file at */ + int mxSz; /* Maximum bytes of data to store */ + int bEof; /* Set to true when merge is finished */ + int bUseThread; /* True to use a bg thread for this object */ + SorterFile aFile[2]; /* aFile[0] for reading, [1] for writing */ +}; + +/* +** An instance of this object is used for writing a PMA. +** +** The PMA is written one record at a time. Each record is of an arbitrary +** size. But I/O is more efficient if it occurs in page-sized blocks where +** each block is aligned on a page boundary. This object caches writes to +** the PMA so that aligned, page-size blocks are written. +*/ +struct PmaWriter { int eFWErr; /* Non-zero if in an error state */ u8 *aBuffer; /* Pointer to write buffer */ int nBuffer; /* Size of write buffer in bytes */ int iBufStart; /* First byte of buffer to write */ int iBufEnd; /* Last byte of buffer to write */ i64 iWriteOff; /* Offset of start of buffer in file */ - sqlite3_file *pFile; /* File to write to */ + sqlite3_file *pFd; /* File handle to write to */ }; /* -** A structure to store a single record. All in-memory records are connected -** together into a linked list headed at VdbeSorter.pRecord using the -** SorterRecord.pNext pointer. +** This object is the header on a single record while that record is being +** held in memory and prior to being written out as part of a PMA. +** +** How the linked list is connected depends on how memory is being managed +** by this module. If using a separate allocation for each in-memory record +** (VdbeSorter.list.aMemory==0), then the list is always connected using the +** SorterRecord.u.pNext pointers. +** +** Or, if using the single large allocation method (VdbeSorter.list.aMemory!=0), +** then while records are being accumulated the list is linked using the +** SorterRecord.u.iNext offset. This is because the aMemory[] array may +** be sqlite3Realloc()ed while records are being accumulated. Once the VM +** has finished passing records to the sorter, or when the in-memory buffer +** is full, the list is sorted. As part of the sorting process, it is +** converted to use the SorterRecord.u.pNext pointers. See function +** vdbeSorterSort() for details. */ struct SorterRecord { - void *pVal; - int nVal; - SorterRecord *pNext; + int nVal; /* Size of the record in bytes */ + union { + SorterRecord *pNext; /* Pointer to next record in list */ + int iNext; /* Offset within aMemory of next record */ + } u; + /* The data for the record immediately follows this header */ }; -/* Minimum allowable value for the VdbeSorter.nWorking variable */ -#define SORTER_MIN_WORKING 10 +/* Return a pointer to the buffer containing the record data for SorterRecord +** object p. Should be used as if: +** +** void *SRVAL(SorterRecord *p) { return (void*)&p[1]; } +*/ +#define SRVAL(p) ((void*)((SorterRecord*)(p) + 1)) -/* Maximum number of segments to merge in a single pass. */ + +/* Maximum number of PMAs that a single MergeEngine can merge */ #define SORTER_MAX_MERGE_COUNT 16 +static int vdbeIncrSwap(IncrMerger*); +static void vdbeIncrFree(IncrMerger *); + /* -** Free all memory belonging to the VdbeSorterIter object passed as the second +** Free all memory belonging to the PmaReader object passed as the ** argument. All structure fields are set to zero before returning. */ -static void vdbeSorterIterZero(sqlite3 *db, VdbeSorterIter *pIter){ - sqlite3DbFree(db, pIter->aAlloc); - sqlite3DbFree(db, pIter->aBuffer); - memset(pIter, 0, sizeof(VdbeSorterIter)); +static void vdbePmaReaderClear(PmaReader *pReadr){ + sqlite3_free(pReadr->aAlloc); + sqlite3_free(pReadr->aBuffer); + if( pReadr->aMap ) sqlite3OsUnfetch(pReadr->pFd, 0, pReadr->aMap); + vdbeIncrFree(pReadr->pIncr); + memset(pReadr, 0, sizeof(PmaReader)); } /* -** Read nByte bytes of data from the stream of data iterated by object p. +** Read the next nByte bytes of data from the PMA p. ** If successful, set *ppOut to point to a buffer containing the data ** and return SQLITE_OK. Otherwise, if an error occurs, return an SQLite ** error code. ** -** The buffer indicated by *ppOut may only be considered valid until the +** The buffer returned in *ppOut is only valid until the ** next call to this function. */ -static int vdbeSorterIterRead( - sqlite3 *db, /* Database handle (for malloc) */ - VdbeSorterIter *p, /* Iterator */ +static int vdbePmaReadBlob( + PmaReader *p, /* PmaReader from which to take the blob */ int nByte, /* Bytes of data to read */ u8 **ppOut /* OUT: Pointer to buffer containing data */ ){ int iBuf; /* Offset within buffer to read from */ int nAvail; /* Bytes of data available in buffer */ + + if( p->aMap ){ + *ppOut = &p->aMap[p->iReadOff]; + p->iReadOff += nByte; + return SQLITE_OK; + } + assert( p->aBuffer ); /* If there is no more data to be read from the buffer, read the next @@ -74132,8 +77634,8 @@ } assert( nRead>0 ); - /* Read data from the file. Return early if an error occurs. */ - rc = sqlite3OsRead(p->pFile, p->aBuffer, nRead, p->iReadOff); + /* Readr data from the file. Return early if an error occurs. */ + rc = sqlite3OsRead(p->pFd, p->aBuffer, nRead, p->iReadOff); assert( rc!=SQLITE_IOERR_SHORT_READ ); if( rc!=SQLITE_OK ) return rc; } @@ -74153,11 +77655,13 @@ /* Extend the p->aAlloc[] allocation if required. */ if( p->nAllocnAlloc*2; + u8 *aNew; + int nNew = MAX(128, p->nAlloc*2); while( nByte>nNew ) nNew = nNew*2; - p->aAlloc = sqlite3DbReallocOrFree(db, p->aAlloc, nNew); - if( !p->aAlloc ) return SQLITE_NOMEM; + aNew = sqlite3Realloc(p->aAlloc, nNew); + if( !aNew ) return SQLITE_NOMEM; p->nAlloc = nNew; + p->aAlloc = aNew; } /* Copy as much data as is available in the buffer into the start of @@ -74169,13 +77673,13 @@ /* The following loop copies up to p->nBuffer bytes per iteration into ** the p->aAlloc[] buffer. */ while( nRem>0 ){ - int rc; /* vdbeSorterIterRead() return code */ + int rc; /* vdbePmaReadBlob() return code */ int nCopy; /* Number of bytes to copy */ u8 *aNext; /* Pointer to buffer to copy data from */ nCopy = nRem; if( nRem>p->nBuffer ) nCopy = p->nBuffer; - rc = vdbeSorterIterRead(db, p, nCopy, &aNext); + rc = vdbePmaReadBlob(p, nCopy, &aNext); if( rc!=SQLITE_OK ) return rc; assert( aNext!=p->aAlloc ); memcpy(&p->aAlloc[nByte - nRem], aNext, nCopy); @@ -74192,342 +77696,692 @@ ** Read a varint from the stream of data accessed by p. Set *pnOut to ** the value read. */ -static int vdbeSorterIterVarint(sqlite3 *db, VdbeSorterIter *p, u64 *pnOut){ +static int vdbePmaReadVarint(PmaReader *p, u64 *pnOut){ int iBuf; - iBuf = p->iReadOff % p->nBuffer; - if( iBuf && (p->nBuffer-iBuf)>=9 ){ - p->iReadOff += sqlite3GetVarint(&p->aBuffer[iBuf], pnOut); + if( p->aMap ){ + p->iReadOff += sqlite3GetVarint(&p->aMap[p->iReadOff], pnOut); }else{ - u8 aVarint[16], *a; - int i = 0, rc; - do{ - rc = vdbeSorterIterRead(db, p, 1, &a); - if( rc ) return rc; - aVarint[(i++)&0xf] = a[0]; - }while( (a[0]&0x80)!=0 ); - sqlite3GetVarint(aVarint, pnOut); + iBuf = p->iReadOff % p->nBuffer; + if( iBuf && (p->nBuffer-iBuf)>=9 ){ + p->iReadOff += sqlite3GetVarint(&p->aBuffer[iBuf], pnOut); + }else{ + u8 aVarint[16], *a; + int i = 0, rc; + do{ + rc = vdbePmaReadBlob(p, 1, &a); + if( rc ) return rc; + aVarint[(i++)&0xf] = a[0]; + }while( (a[0]&0x80)!=0 ); + sqlite3GetVarint(aVarint, pnOut); + } } return SQLITE_OK; } +/* +** Attempt to memory map file pFile. If successful, set *pp to point to the +** new mapping and return SQLITE_OK. If the mapping is not attempted +** (because the file is too large or the VFS layer is configured not to use +** mmap), return SQLITE_OK and set *pp to NULL. +** +** Or, if an error occurs, return an SQLite error code. The final value of +** *pp is undefined in this case. +*/ +static int vdbeSorterMapFile(SortSubtask *pTask, SorterFile *pFile, u8 **pp){ + int rc = SQLITE_OK; + if( pFile->iEof<=(i64)(pTask->pSorter->db->nMaxSorterMmap) ){ + sqlite3_file *pFd = pFile->pFd; + if( pFd->pMethods->iVersion>=3 ){ + rc = sqlite3OsFetch(pFd, 0, (int)pFile->iEof, (void**)pp); + testcase( rc!=SQLITE_OK ); + } + } + return rc; +} /* -** Advance iterator pIter to the next key in its PMA. Return SQLITE_OK if -** no error occurs, or an SQLite error code if one does. +** Attach PmaReader pReadr to file pFile (if it is not already attached to +** that file) and seek it to offset iOff within the file. Return SQLITE_OK +** if successful, or an SQLite error code if an error occurs. */ -static int vdbeSorterIterNext( - sqlite3 *db, /* Database handle (for sqlite3DbMalloc() ) */ - VdbeSorterIter *pIter /* Iterator to advance */ +static int vdbePmaReaderSeek( + SortSubtask *pTask, /* Task context */ + PmaReader *pReadr, /* Reader whose cursor is to be moved */ + SorterFile *pFile, /* Sorter file to read from */ + i64 iOff /* Offset in pFile */ ){ - int rc; /* Return Code */ + int rc = SQLITE_OK; + + assert( pReadr->pIncr==0 || pReadr->pIncr->bEof==0 ); + + if( sqlite3FaultSim(201) ) return SQLITE_IOERR_READ; + if( pReadr->aMap ){ + sqlite3OsUnfetch(pReadr->pFd, 0, pReadr->aMap); + pReadr->aMap = 0; + } + pReadr->iReadOff = iOff; + pReadr->iEof = pFile->iEof; + pReadr->pFd = pFile->pFd; + + rc = vdbeSorterMapFile(pTask, pFile, &pReadr->aMap); + if( rc==SQLITE_OK && pReadr->aMap==0 ){ + int pgsz = pTask->pSorter->pgsz; + int iBuf = pReadr->iReadOff % pgsz; + if( pReadr->aBuffer==0 ){ + pReadr->aBuffer = (u8*)sqlite3Malloc(pgsz); + if( pReadr->aBuffer==0 ) rc = SQLITE_NOMEM; + pReadr->nBuffer = pgsz; + } + if( rc==SQLITE_OK && iBuf ){ + int nRead = pgsz - iBuf; + if( (pReadr->iReadOff + nRead) > pReadr->iEof ){ + nRead = (int)(pReadr->iEof - pReadr->iReadOff); + } + rc = sqlite3OsRead( + pReadr->pFd, &pReadr->aBuffer[iBuf], nRead, pReadr->iReadOff + ); + testcase( rc!=SQLITE_OK ); + } + } + + return rc; +} + +/* +** Advance PmaReader pReadr to the next key in its PMA. Return SQLITE_OK if +** no error occurs, or an SQLite error code if one does. +*/ +static int vdbePmaReaderNext(PmaReader *pReadr){ + int rc = SQLITE_OK; /* Return Code */ u64 nRec = 0; /* Size of record in bytes */ - if( pIter->iReadOff>=pIter->iEof ){ - /* This is an EOF condition */ - vdbeSorterIterZero(db, pIter); - return SQLITE_OK; + + if( pReadr->iReadOff>=pReadr->iEof ){ + IncrMerger *pIncr = pReadr->pIncr; + int bEof = 1; + if( pIncr ){ + rc = vdbeIncrSwap(pIncr); + if( rc==SQLITE_OK && pIncr->bEof==0 ){ + rc = vdbePmaReaderSeek( + pIncr->pTask, pReadr, &pIncr->aFile[0], pIncr->iStartOff + ); + bEof = 0; + } + } + + if( bEof ){ + /* This is an EOF condition */ + vdbePmaReaderClear(pReadr); + testcase( rc!=SQLITE_OK ); + return rc; + } } - rc = vdbeSorterIterVarint(db, pIter, &nRec); if( rc==SQLITE_OK ){ - pIter->nKey = (int)nRec; - rc = vdbeSorterIterRead(db, pIter, (int)nRec, &pIter->aKey); + rc = vdbePmaReadVarint(pReadr, &nRec); } + if( rc==SQLITE_OK ){ + pReadr->nKey = (int)nRec; + rc = vdbePmaReadBlob(pReadr, (int)nRec, &pReadr->aKey); + testcase( rc!=SQLITE_OK ); + } return rc; } /* -** Initialize iterator pIter to scan through the PMA stored in file pFile +** Initialize PmaReader pReadr to scan through the PMA stored in file pFile ** starting at offset iStart and ending at offset iEof-1. This function -** leaves the iterator pointing to the first key in the PMA (or EOF if the +** leaves the PmaReader pointing to the first key in the PMA (or EOF if the ** PMA is empty). +** +** If the pnByte parameter is NULL, then it is assumed that the file +** contains a single PMA, and that that PMA omits the initial length varint. */ -static int vdbeSorterIterInit( - sqlite3 *db, /* Database handle */ - const VdbeSorter *pSorter, /* Sorter object */ +static int vdbePmaReaderInit( + SortSubtask *pTask, /* Task context */ + SorterFile *pFile, /* Sorter file to read from */ i64 iStart, /* Start offset in pFile */ - VdbeSorterIter *pIter, /* Iterator to populate */ + PmaReader *pReadr, /* PmaReader to populate */ i64 *pnByte /* IN/OUT: Increment this value by PMA size */ ){ - int rc = SQLITE_OK; - int nBuf; + int rc; - nBuf = sqlite3BtreeGetPageSize(db->aDb[0].pBt); + assert( pFile->iEof>iStart ); + assert( pReadr->aAlloc==0 && pReadr->nAlloc==0 ); + assert( pReadr->aBuffer==0 ); + assert( pReadr->aMap==0 ); - assert( pSorter->iWriteOff>iStart ); - assert( pIter->aAlloc==0 ); - assert( pIter->aBuffer==0 ); - pIter->pFile = pSorter->pTemp1; - pIter->iReadOff = iStart; - pIter->nAlloc = 128; - pIter->aAlloc = (u8 *)sqlite3DbMallocRaw(db, pIter->nAlloc); - pIter->nBuffer = nBuf; - pIter->aBuffer = (u8 *)sqlite3DbMallocRaw(db, nBuf); - - if( !pIter->aBuffer ){ - rc = SQLITE_NOMEM; - }else{ - int iBuf; - - iBuf = iStart % nBuf; - if( iBuf ){ - int nRead = nBuf - iBuf; - if( (iStart + nRead) > pSorter->iWriteOff ){ - nRead = (int)(pSorter->iWriteOff - iStart); - } - rc = sqlite3OsRead( - pSorter->pTemp1, &pIter->aBuffer[iBuf], nRead, iStart - ); - assert( rc!=SQLITE_IOERR_SHORT_READ ); - } - - if( rc==SQLITE_OK ){ - u64 nByte; /* Size of PMA in bytes */ - pIter->iEof = pSorter->iWriteOff; - rc = vdbeSorterIterVarint(db, pIter, &nByte); - pIter->iEof = pIter->iReadOff + nByte; - *pnByte += nByte; - } + rc = vdbePmaReaderSeek(pTask, pReadr, pFile, iStart); + if( rc==SQLITE_OK ){ + u64 nByte; /* Size of PMA in bytes */ + rc = vdbePmaReadVarint(pReadr, &nByte); + pReadr->iEof = pReadr->iReadOff + nByte; + *pnByte += nByte; } if( rc==SQLITE_OK ){ - rc = vdbeSorterIterNext(db, pIter); + rc = vdbePmaReaderNext(pReadr); } return rc; } /* ** Compare key1 (buffer pKey1, size nKey1 bytes) with key2 (buffer pKey2, -** size nKey2 bytes). Argument pKeyInfo supplies the collation functions -** used by the comparison. If an error occurs, return an SQLite error code. -** Otherwise, return SQLITE_OK and set *pRes to a negative, zero or positive -** value, depending on whether key1 is smaller, equal to or larger than key2. +** size nKey2 bytes). Use (pTask->pKeyInfo) for the collation sequences +** used by the comparison. Return the result of the comparison. ** -** If the bOmitRowid argument is non-zero, assume both keys end in a rowid -** field. For the purposes of the comparison, ignore it. Also, if bOmitRowid -** is true and key1 contains even a single NULL value, it is considered to -** be less than key2. Even if key2 also contains NULL values. +** Before returning, object (pTask->pUnpacked) is populated with the +** unpacked version of key2. Or, if pKey2 is passed a NULL pointer, then it +** is assumed that the (pTask->pUnpacked) structure already contains the +** unpacked key to use as key2. ** -** If pKey2 is passed a NULL pointer, then it is assumed that the pCsr->aSpace -** has been allocated and contains an unpacked record that is used as key2. +** If an OOM error is encountered, (pTask->pUnpacked->error_rc) is set +** to SQLITE_NOMEM. */ -static void vdbeSorterCompare( - const VdbeCursor *pCsr, /* Cursor object (for pKeyInfo) */ - int nIgnore, /* Ignore the last nIgnore fields */ +static int vdbeSorterCompare( + SortSubtask *pTask, /* Subtask context (for pKeyInfo) */ const void *pKey1, int nKey1, /* Left side of comparison */ - const void *pKey2, int nKey2, /* Right side of comparison */ - int *pRes /* OUT: Result of comparison */ + const void *pKey2, int nKey2 /* Right side of comparison */ ){ - KeyInfo *pKeyInfo = pCsr->pKeyInfo; - VdbeSorter *pSorter = pCsr->pSorter; - UnpackedRecord *r2 = pSorter->pUnpacked; - int i; - + UnpackedRecord *r2 = pTask->pUnpacked; if( pKey2 ){ - sqlite3VdbeRecordUnpack(pKeyInfo, nKey2, pKey2, r2); + sqlite3VdbeRecordUnpack(pTask->pSorter->pKeyInfo, nKey2, pKey2, r2); } + return sqlite3VdbeRecordCompare(nKey1, pKey1, r2); +} - if( nIgnore ){ - r2->nField = pKeyInfo->nField - nIgnore; - assert( r2->nField>0 ); - for(i=0; inField; i++){ - if( r2->aMem[i].flags & MEM_Null ){ - *pRes = -1; - return; +/* +** Initialize the temporary index cursor just opened as a sorter cursor. +** +** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nField) +** to determine the number of fields that should be compared from the +** records being sorted. However, if the value passed as argument nField +** is non-zero and the sorter is able to guarantee a stable sort, nField +** is used instead. This is used when sorting records for a CREATE INDEX +** statement. In this case, keys are always delivered to the sorter in +** order of the primary key, which happens to be make up the final part +** of the records being sorted. So if the sort is stable, there is never +** any reason to compare PK fields and they can be ignored for a small +** performance boost. +** +** The sorter can guarantee a stable sort when running in single-threaded +** mode, but not in multi-threaded mode. +** +** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +*/ +SQLITE_PRIVATE int sqlite3VdbeSorterInit( + sqlite3 *db, /* Database connection (for malloc()) */ + int nField, /* Number of key fields in each record */ + VdbeCursor *pCsr /* Cursor that holds the new sorter */ +){ + int pgsz; /* Page size of main database */ + int i; /* Used to iterate through aTask[] */ + int mxCache; /* Cache size */ + VdbeSorter *pSorter; /* The new sorter */ + KeyInfo *pKeyInfo; /* Copy of pCsr->pKeyInfo with db==0 */ + int szKeyInfo; /* Size of pCsr->pKeyInfo in bytes */ + int sz; /* Size of pSorter in bytes */ + int rc = SQLITE_OK; +#if SQLITE_MAX_WORKER_THREADS==0 +# define nWorker 0 +#else + int nWorker; +#endif + + /* Initialize the upper limit on the number of worker threads */ +#if SQLITE_MAX_WORKER_THREADS>0 + if( sqlite3TempInMemory(db) || sqlite3GlobalConfig.bCoreMutex==0 ){ + nWorker = 0; + }else{ + nWorker = db->aLimit[SQLITE_LIMIT_WORKER_THREADS]; + } +#endif + + /* Do not allow the total number of threads (main thread + all workers) + ** to exceed the maximum merge count */ +#if SQLITE_MAX_WORKER_THREADS>=SORTER_MAX_MERGE_COUNT + if( nWorker>=SORTER_MAX_MERGE_COUNT ){ + nWorker = SORTER_MAX_MERGE_COUNT-1; + } +#endif + + assert( pCsr->pKeyInfo && pCsr->pBt==0 ); + szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nField-1)*sizeof(CollSeq*); + sz = sizeof(VdbeSorter) + nWorker * sizeof(SortSubtask); + + pSorter = (VdbeSorter*)sqlite3DbMallocZero(db, sz + szKeyInfo); + pCsr->pSorter = pSorter; + if( pSorter==0 ){ + rc = SQLITE_NOMEM; + }else{ + pSorter->pKeyInfo = pKeyInfo = (KeyInfo*)((u8*)pSorter + sz); + memcpy(pKeyInfo, pCsr->pKeyInfo, szKeyInfo); + pKeyInfo->db = 0; + if( nField && nWorker==0 ) pKeyInfo->nField = nField; + pSorter->pgsz = pgsz = sqlite3BtreeGetPageSize(db->aDb[0].pBt); + pSorter->nTask = nWorker + 1; + pSorter->bUseThreads = (pSorter->nTask>1); + pSorter->db = db; + for(i=0; inTask; i++){ + SortSubtask *pTask = &pSorter->aTask[i]; + pTask->pSorter = pSorter; + } + + if( !sqlite3TempInMemory(db) ){ + u32 szPma = sqlite3GlobalConfig.szPma; + pSorter->mnPmaSize = szPma * pgsz; + mxCache = db->aDb[0].pSchema->cache_size; + if( mxCache<(int)szPma ) mxCache = (int)szPma; + pSorter->mxPmaSize = MIN((i64)mxCache*pgsz, SQLITE_MAX_PMASZ); + + /* EVIDENCE-OF: R-26747-61719 When the application provides any amount of + ** scratch memory using SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary + ** large heap allocations. + */ + if( sqlite3GlobalConfig.pScratch==0 ){ + assert( pSorter->iMemory==0 ); + pSorter->nMemory = pgsz; + pSorter->list.aMemory = (u8*)sqlite3Malloc(pgsz); + if( !pSorter->list.aMemory ) rc = SQLITE_NOMEM; } } - assert( r2->default_rc==0 ); } - *pRes = sqlite3VdbeRecordCompare(nKey1, pKey1, r2, 0); + return rc; } +#undef nWorker /* Defined at the top of this function */ /* -** This function is called to compare two iterator keys when merging -** multiple b-tree segments. Parameter iOut is the index of the aTree[] -** value to recalculate. +** Free the list of sorted records starting at pRecord. */ -static int vdbeSorterDoCompare(const VdbeCursor *pCsr, int iOut){ - VdbeSorter *pSorter = pCsr->pSorter; - int i1; - int i2; - int iRes; - VdbeSorterIter *p1; - VdbeSorterIter *p2; +static void vdbeSorterRecordFree(sqlite3 *db, SorterRecord *pRecord){ + SorterRecord *p; + SorterRecord *pNext; + for(p=pRecord; p; p=pNext){ + pNext = p->u.pNext; + sqlite3DbFree(db, p); + } +} - assert( iOutnTree && iOut>0 ); +/* +** Free all resources owned by the object indicated by argument pTask. All +** fields of *pTask are zeroed before returning. +*/ +static void vdbeSortSubtaskCleanup(sqlite3 *db, SortSubtask *pTask){ + sqlite3DbFree(db, pTask->pUnpacked); + pTask->pUnpacked = 0; +#if SQLITE_MAX_WORKER_THREADS>0 + /* pTask->list.aMemory can only be non-zero if it was handed memory + ** from the main thread. That only occurs SQLITE_MAX_WORKER_THREADS>0 */ + if( pTask->list.aMemory ){ + sqlite3_free(pTask->list.aMemory); + pTask->list.aMemory = 0; + }else +#endif + { + assert( pTask->list.aMemory==0 ); + vdbeSorterRecordFree(0, pTask->list.pList); + } + pTask->list.pList = 0; + if( pTask->file.pFd ){ + sqlite3OsCloseFree(pTask->file.pFd); + pTask->file.pFd = 0; + pTask->file.iEof = 0; + } + if( pTask->file2.pFd ){ + sqlite3OsCloseFree(pTask->file2.pFd); + pTask->file2.pFd = 0; + pTask->file2.iEof = 0; + } +} - if( iOut>=(pSorter->nTree/2) ){ - i1 = (iOut - pSorter->nTree/2) * 2; - i2 = i1 + 1; - }else{ - i1 = pSorter->aTree[iOut*2]; - i2 = pSorter->aTree[iOut*2+1]; +#ifdef SQLITE_DEBUG_SORTER_THREADS +static void vdbeSorterWorkDebug(SortSubtask *pTask, const char *zEvent){ + i64 t; + int iTask = (pTask - pTask->pSorter->aTask); + sqlite3OsCurrentTimeInt64(pTask->pSorter->db->pVfs, &t); + fprintf(stderr, "%lld:%d %s\n", t, iTask, zEvent); +} +static void vdbeSorterRewindDebug(const char *zEvent){ + i64 t; + sqlite3OsCurrentTimeInt64(sqlite3_vfs_find(0), &t); + fprintf(stderr, "%lld:X %s\n", t, zEvent); +} +static void vdbeSorterPopulateDebug( + SortSubtask *pTask, + const char *zEvent +){ + i64 t; + int iTask = (pTask - pTask->pSorter->aTask); + sqlite3OsCurrentTimeInt64(pTask->pSorter->db->pVfs, &t); + fprintf(stderr, "%lld:bg%d %s\n", t, iTask, zEvent); +} +static void vdbeSorterBlockDebug( + SortSubtask *pTask, + int bBlocked, + const char *zEvent +){ + if( bBlocked ){ + i64 t; + sqlite3OsCurrentTimeInt64(pTask->pSorter->db->pVfs, &t); + fprintf(stderr, "%lld:main %s\n", t, zEvent); } +} +#else +# define vdbeSorterWorkDebug(x,y) +# define vdbeSorterRewindDebug(y) +# define vdbeSorterPopulateDebug(x,y) +# define vdbeSorterBlockDebug(x,y,z) +#endif - p1 = &pSorter->aIter[i1]; - p2 = &pSorter->aIter[i2]; - - if( p1->pFile==0 ){ - iRes = i2; - }else if( p2->pFile==0 ){ - iRes = i1; - }else{ - int res; - assert( pCsr->pSorter->pUnpacked!=0 ); /* allocated in vdbeSorterMerge() */ - vdbeSorterCompare( - pCsr, 0, p1->aKey, p1->nKey, p2->aKey, p2->nKey, &res - ); - if( res<=0 ){ - iRes = i1; - }else{ - iRes = i2; - } +#if SQLITE_MAX_WORKER_THREADS>0 +/* +** Join thread pTask->thread. +*/ +static int vdbeSorterJoinThread(SortSubtask *pTask){ + int rc = SQLITE_OK; + if( pTask->pThread ){ +#ifdef SQLITE_DEBUG_SORTER_THREADS + int bDone = pTask->bDone; +#endif + void *pRet = SQLITE_INT_TO_PTR(SQLITE_ERROR); + vdbeSorterBlockDebug(pTask, !bDone, "enter"); + (void)sqlite3ThreadJoin(pTask->pThread, &pRet); + vdbeSorterBlockDebug(pTask, !bDone, "exit"); + rc = SQLITE_PTR_TO_INT(pRet); + assert( pTask->bDone==1 ); + pTask->bDone = 0; + pTask->pThread = 0; } + return rc; +} - pSorter->aTree[iOut] = iRes; - return SQLITE_OK; +/* +** Launch a background thread to run xTask(pIn). +*/ +static int vdbeSorterCreateThread( + SortSubtask *pTask, /* Thread will use this task object */ + void *(*xTask)(void*), /* Routine to run in a separate thread */ + void *pIn /* Argument passed into xTask() */ +){ + assert( pTask->pThread==0 && pTask->bDone==0 ); + return sqlite3ThreadCreate(&pTask->pThread, xTask, pIn); } /* -** Initialize the temporary index cursor just opened as a sorter cursor. +** Join all outstanding threads launched by SorterWrite() to create +** level-0 PMAs. */ -SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *db, VdbeCursor *pCsr){ - int pgsz; /* Page size of main database */ - int mxCache; /* Cache size */ - VdbeSorter *pSorter; /* The new sorter */ - char *d; /* Dummy */ +static int vdbeSorterJoinAll(VdbeSorter *pSorter, int rcin){ + int rc = rcin; + int i; - assert( pCsr->pKeyInfo && pCsr->pBt==0 ); - pCsr->pSorter = pSorter = sqlite3DbMallocZero(db, sizeof(VdbeSorter)); - if( pSorter==0 ){ - return SQLITE_NOMEM; + /* This function is always called by the main user thread. + ** + ** If this function is being called after SorterRewind() has been called, + ** it is possible that thread pSorter->aTask[pSorter->nTask-1].pThread + ** is currently attempt to join one of the other threads. To avoid a race + ** condition where this thread also attempts to join the same object, join + ** thread pSorter->aTask[pSorter->nTask-1].pThread first. */ + for(i=pSorter->nTask-1; i>=0; i--){ + SortSubtask *pTask = &pSorter->aTask[i]; + int rc2 = vdbeSorterJoinThread(pTask); + if( rc==SQLITE_OK ) rc = rc2; } - - pSorter->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pCsr->pKeyInfo, 0, 0, &d); - if( pSorter->pUnpacked==0 ) return SQLITE_NOMEM; - assert( pSorter->pUnpacked==(UnpackedRecord *)d ); + return rc; +} +#else +# define vdbeSorterJoinAll(x,rcin) (rcin) +# define vdbeSorterJoinThread(pTask) SQLITE_OK +#endif - if( !sqlite3TempInMemory(db) ){ - pgsz = sqlite3BtreeGetPageSize(db->aDb[0].pBt); - pSorter->mnPmaSize = SORTER_MIN_WORKING * pgsz; - mxCache = db->aDb[0].pSchema->cache_size; - if( mxCachemxPmaSize = mxCache * pgsz; +/* +** Allocate a new MergeEngine object capable of handling up to +** nReader PmaReader inputs. +** +** nReader is automatically rounded up to the next power of two. +** nReader may not exceed SORTER_MAX_MERGE_COUNT even after rounding up. +*/ +static MergeEngine *vdbeMergeEngineNew(int nReader){ + int N = 2; /* Smallest power of two >= nReader */ + int nByte; /* Total bytes of space to allocate */ + MergeEngine *pNew; /* Pointer to allocated object to return */ + + assert( nReader<=SORTER_MAX_MERGE_COUNT ); + + while( NnTree = N; + pNew->pTask = 0; + pNew->aReadr = (PmaReader*)&pNew[1]; + pNew->aTree = (int*)&pNew->aReadr[N]; } + return pNew; +} - return SQLITE_OK; +/* +** Free the MergeEngine object passed as the only argument. +*/ +static void vdbeMergeEngineFree(MergeEngine *pMerger){ + int i; + if( pMerger ){ + for(i=0; inTree; i++){ + vdbePmaReaderClear(&pMerger->aReadr[i]); + } + } + sqlite3_free(pMerger); } /* -** Free the list of sorted records starting at pRecord. +** Free all resources associated with the IncrMerger object indicated by +** the first argument. */ -static void vdbeSorterRecordFree(sqlite3 *db, SorterRecord *pRecord){ - SorterRecord *p; - SorterRecord *pNext; - for(p=pRecord; p; p=pNext){ - pNext = p->pNext; - sqlite3DbFree(db, p); +static void vdbeIncrFree(IncrMerger *pIncr){ + if( pIncr ){ +#if SQLITE_MAX_WORKER_THREADS>0 + if( pIncr->bUseThread ){ + vdbeSorterJoinThread(pIncr->pTask); + if( pIncr->aFile[0].pFd ) sqlite3OsCloseFree(pIncr->aFile[0].pFd); + if( pIncr->aFile[1].pFd ) sqlite3OsCloseFree(pIncr->aFile[1].pFd); + } +#endif + vdbeMergeEngineFree(pIncr->pMerger); + sqlite3_free(pIncr); } } /* +** Reset a sorting cursor back to its original empty state. +*/ +SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *db, VdbeSorter *pSorter){ + int i; + (void)vdbeSorterJoinAll(pSorter, SQLITE_OK); + assert( pSorter->bUseThreads || pSorter->pReader==0 ); +#if SQLITE_MAX_WORKER_THREADS>0 + if( pSorter->pReader ){ + vdbePmaReaderClear(pSorter->pReader); + sqlite3DbFree(db, pSorter->pReader); + pSorter->pReader = 0; + } +#endif + vdbeMergeEngineFree(pSorter->pMerger); + pSorter->pMerger = 0; + for(i=0; inTask; i++){ + SortSubtask *pTask = &pSorter->aTask[i]; + vdbeSortSubtaskCleanup(db, pTask); + } + if( pSorter->list.aMemory==0 ){ + vdbeSorterRecordFree(0, pSorter->list.pList); + } + pSorter->list.pList = 0; + pSorter->list.szPMA = 0; + pSorter->bUsePMA = 0; + pSorter->iMemory = 0; + pSorter->mxKeysize = 0; + sqlite3DbFree(db, pSorter->pUnpacked); + pSorter->pUnpacked = 0; +} + +/* ** Free any cursor components allocated by sqlite3VdbeSorterXXX routines. */ SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *db, VdbeCursor *pCsr){ VdbeSorter *pSorter = pCsr->pSorter; if( pSorter ){ - if( pSorter->aIter ){ - int i; - for(i=0; inTree; i++){ - vdbeSorterIterZero(db, &pSorter->aIter[i]); - } - sqlite3DbFree(db, pSorter->aIter); - } - if( pSorter->pTemp1 ){ - sqlite3OsCloseFree(pSorter->pTemp1); - } - vdbeSorterRecordFree(db, pSorter->pRecord); - sqlite3DbFree(db, pSorter->pUnpacked); + sqlite3VdbeSorterReset(db, pSorter); + sqlite3_free(pSorter->list.aMemory); sqlite3DbFree(db, pSorter); pCsr->pSorter = 0; } } +#if SQLITE_MAX_MMAP_SIZE>0 /* +** The first argument is a file-handle open on a temporary file. The file +** is guaranteed to be nByte bytes or smaller in size. This function +** attempts to extend the file to nByte bytes in size and to ensure that +** the VFS has memory mapped it. +** +** Whether or not the file does end up memory mapped of course depends on +** the specific VFS implementation. +*/ +static void vdbeSorterExtendFile(sqlite3 *db, sqlite3_file *pFd, i64 nByte){ + if( nByte<=(i64)(db->nMaxSorterMmap) && pFd->pMethods->iVersion>=3 ){ + void *p = 0; + int chunksize = 4*1024; + sqlite3OsFileControlHint(pFd, SQLITE_FCNTL_CHUNK_SIZE, &chunksize); + sqlite3OsFileControlHint(pFd, SQLITE_FCNTL_SIZE_HINT, &nByte); + sqlite3OsFetch(pFd, 0, (int)nByte, &p); + sqlite3OsUnfetch(pFd, 0, p); + } +} +#else +# define vdbeSorterExtendFile(x,y,z) +#endif + +/* ** Allocate space for a file-handle and open a temporary file. If successful, -** set *ppFile to point to the malloc'd file-handle and return SQLITE_OK. -** Otherwise, set *ppFile to 0 and return an SQLite error code. +** set *ppFd to point to the malloc'd file-handle and return SQLITE_OK. +** Otherwise, set *ppFd to 0 and return an SQLite error code. */ -static int vdbeSorterOpenTempFile(sqlite3 *db, sqlite3_file **ppFile){ - int dummy; - return sqlite3OsOpenMalloc(db->pVfs, 0, ppFile, +static int vdbeSorterOpenTempFile( + sqlite3 *db, /* Database handle doing sort */ + i64 nExtend, /* Attempt to extend file to this size */ + sqlite3_file **ppFd +){ + int rc; + rc = sqlite3OsOpenMalloc(db->pVfs, 0, ppFd, SQLITE_OPEN_TEMP_JOURNAL | SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE | - SQLITE_OPEN_EXCLUSIVE | SQLITE_OPEN_DELETEONCLOSE, &dummy + SQLITE_OPEN_EXCLUSIVE | SQLITE_OPEN_DELETEONCLOSE, &rc ); + if( rc==SQLITE_OK ){ + i64 max = SQLITE_MAX_MMAP_SIZE; + sqlite3OsFileControlHint(*ppFd, SQLITE_FCNTL_MMAP_SIZE, (void*)&max); + if( nExtend>0 ){ + vdbeSorterExtendFile(db, *ppFd, nExtend); + } + } + return rc; } /* +** If it has not already been allocated, allocate the UnpackedRecord +** structure at pTask->pUnpacked. Return SQLITE_OK if successful (or +** if no allocation was required), or SQLITE_NOMEM otherwise. +*/ +static int vdbeSortAllocUnpacked(SortSubtask *pTask){ + if( pTask->pUnpacked==0 ){ + char *pFree; + pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord( + pTask->pSorter->pKeyInfo, 0, 0, &pFree + ); + assert( pTask->pUnpacked==(UnpackedRecord*)pFree ); + if( pFree==0 ) return SQLITE_NOMEM; + pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nField; + pTask->pUnpacked->errCode = 0; + } + return SQLITE_OK; +} + + +/* ** Merge the two sorted lists p1 and p2 into a single list. ** Set *ppOut to the head of the new list. */ static void vdbeSorterMerge( - const VdbeCursor *pCsr, /* For pKeyInfo */ + SortSubtask *pTask, /* Calling thread context */ SorterRecord *p1, /* First list to merge */ SorterRecord *p2, /* Second list to merge */ SorterRecord **ppOut /* OUT: Head of merged list */ ){ SorterRecord *pFinal = 0; SorterRecord **pp = &pFinal; - void *pVal2 = p2 ? p2->pVal : 0; + void *pVal2 = p2 ? SRVAL(p2) : 0; while( p1 && p2 ){ int res; - vdbeSorterCompare(pCsr, 0, p1->pVal, p1->nVal, pVal2, p2->nVal, &res); + res = vdbeSorterCompare(pTask, SRVAL(p1), p1->nVal, pVal2, p2->nVal); if( res<=0 ){ *pp = p1; - pp = &p1->pNext; - p1 = p1->pNext; + pp = &p1->u.pNext; + p1 = p1->u.pNext; pVal2 = 0; }else{ *pp = p2; - pp = &p2->pNext; - p2 = p2->pNext; + pp = &p2->u.pNext; + p2 = p2->u.pNext; if( p2==0 ) break; - pVal2 = p2->pVal; + pVal2 = SRVAL(p2); } } *pp = p1 ? p1 : p2; *ppOut = pFinal; } /* -** Sort the linked list of records headed at pCsr->pRecord. Return SQLITE_OK -** if successful, or an SQLite error code (i.e. SQLITE_NOMEM) if an error -** occurs. +** Sort the linked list of records headed at pTask->pList. Return +** SQLITE_OK if successful, or an SQLite error code (i.e. SQLITE_NOMEM) if +** an error occurs. */ -static int vdbeSorterSort(const VdbeCursor *pCsr){ +static int vdbeSorterSort(SortSubtask *pTask, SorterList *pList){ int i; SorterRecord **aSlot; SorterRecord *p; - VdbeSorter *pSorter = pCsr->pSorter; + int rc; + rc = vdbeSortAllocUnpacked(pTask); + if( rc!=SQLITE_OK ) return rc; + aSlot = (SorterRecord **)sqlite3MallocZero(64 * sizeof(SorterRecord *)); if( !aSlot ){ return SQLITE_NOMEM; } - p = pSorter->pRecord; + p = pList->pList; while( p ){ - SorterRecord *pNext = p->pNext; - p->pNext = 0; + SorterRecord *pNext; + if( pList->aMemory ){ + if( (u8*)p==pList->aMemory ){ + pNext = 0; + }else{ + assert( p->u.iNextaMemory) ); + pNext = (SorterRecord*)&pList->aMemory[p->u.iNext]; + } + }else{ + pNext = p->u.pNext; + } + + p->u.pNext = 0; for(i=0; aSlot[i]; i++){ - vdbeSorterMerge(pCsr, p, aSlot[i], &p); + vdbeSorterMerge(pTask, p, aSlot[i], &p); aSlot[i] = 0; } aSlot[i] = p; @@ -74536,42 +78390,43 @@ p = 0; for(i=0; i<64; i++){ - vdbeSorterMerge(pCsr, p, aSlot[i], &p); + vdbeSorterMerge(pTask, p, aSlot[i], &p); } - pSorter->pRecord = p; + pList->pList = p; sqlite3_free(aSlot); - return SQLITE_OK; + assert( pTask->pUnpacked->errCode==SQLITE_OK + || pTask->pUnpacked->errCode==SQLITE_NOMEM + ); + return pTask->pUnpacked->errCode; } /* -** Initialize a file-writer object. +** Initialize a PMA-writer object. */ -static void fileWriterInit( - sqlite3 *db, /* Database (for malloc) */ - sqlite3_file *pFile, /* File to write to */ - FileWriter *p, /* Object to populate */ - i64 iStart /* Offset of pFile to begin writing at */ +static void vdbePmaWriterInit( + sqlite3_file *pFd, /* File handle to write to */ + PmaWriter *p, /* Object to populate */ + int nBuf, /* Buffer size */ + i64 iStart /* Offset of pFd to begin writing at */ ){ - int nBuf = sqlite3BtreeGetPageSize(db->aDb[0].pBt); - - memset(p, 0, sizeof(FileWriter)); - p->aBuffer = (u8 *)sqlite3DbMallocRaw(db, nBuf); + memset(p, 0, sizeof(PmaWriter)); + p->aBuffer = (u8*)sqlite3Malloc(nBuf); if( !p->aBuffer ){ p->eFWErr = SQLITE_NOMEM; }else{ p->iBufEnd = p->iBufStart = (iStart % nBuf); p->iWriteOff = iStart - p->iBufStart; p->nBuffer = nBuf; - p->pFile = pFile; + p->pFd = pFd; } } /* -** Write nData bytes of data to the file-write object. Return SQLITE_OK +** Write nData bytes of data to the PMA. Return SQLITE_OK ** if successful, or an SQLite error code if an error occurs. */ -static void fileWriterWrite(FileWriter *p, u8 *pData, int nData){ +static void vdbePmaWriteBlob(PmaWriter *p, u8 *pData, int nData){ int nRem = nData; while( nRem>0 && p->eFWErr==0 ){ int nCopy = nRem; @@ -74582,7 +78437,7 @@ memcpy(&p->aBuffer[p->iBufEnd], &pData[nData-nRem], nCopy); p->iBufEnd += nCopy; if( p->iBufEnd==p->nBuffer ){ - p->eFWErr = sqlite3OsWrite(p->pFile, + p->eFWErr = sqlite3OsWrite(p->pFd, &p->aBuffer[p->iBufStart], p->iBufEnd - p->iBufStart, p->iWriteOff + p->iBufStart ); @@ -74596,43 +78451,44 @@ } /* -** Flush any buffered data to disk and clean up the file-writer object. -** The results of using the file-writer after this call are undefined. +** Flush any buffered data to disk and clean up the PMA-writer object. +** The results of using the PMA-writer after this call are undefined. ** Return SQLITE_OK if flushing the buffered data succeeds or is not ** required. Otherwise, return an SQLite error code. ** ** Before returning, set *piEof to the offset immediately following the ** last byte written to the file. */ -static int fileWriterFinish(sqlite3 *db, FileWriter *p, i64 *piEof){ +static int vdbePmaWriterFinish(PmaWriter *p, i64 *piEof){ int rc; if( p->eFWErr==0 && ALWAYS(p->aBuffer) && p->iBufEnd>p->iBufStart ){ - p->eFWErr = sqlite3OsWrite(p->pFile, + p->eFWErr = sqlite3OsWrite(p->pFd, &p->aBuffer[p->iBufStart], p->iBufEnd - p->iBufStart, p->iWriteOff + p->iBufStart ); } *piEof = (p->iWriteOff + p->iBufEnd); - sqlite3DbFree(db, p->aBuffer); + sqlite3_free(p->aBuffer); rc = p->eFWErr; - memset(p, 0, sizeof(FileWriter)); + memset(p, 0, sizeof(PmaWriter)); return rc; } /* -** Write value iVal encoded as a varint to the file-write object. Return +** Write value iVal encoded as a varint to the PMA. Return ** SQLITE_OK if successful, or an SQLite error code if an error occurs. */ -static void fileWriterWriteVarint(FileWriter *p, u64 iVal){ +static void vdbePmaWriteVarint(PmaWriter *p, u64 iVal){ int nByte; u8 aByte[10]; nByte = sqlite3PutVarint(aByte, iVal); - fileWriterWrite(p, aByte, nByte); + vdbePmaWriteBlob(p, aByte, nByte); } /* -** Write the current contents of the in-memory linked-list to a PMA. Return -** SQLITE_OK if successful, or an SQLite error code otherwise. +** Write the current contents of in-memory linked-list pList to a level-0 +** PMA in the temp file belonging to sub-task pTask. Return SQLITE_OK if +** successful, or an SQLite error code otherwise. ** ** The format of a PMA is: ** @@ -74643,238 +78499,1025 @@ ** Each record consists of a varint followed by a blob of data (the ** key). The varint is the number of bytes in the blob of data. */ -static int vdbeSorterListToPMA(sqlite3 *db, const VdbeCursor *pCsr){ +static int vdbeSorterListToPMA(SortSubtask *pTask, SorterList *pList){ + sqlite3 *db = pTask->pSorter->db; int rc = SQLITE_OK; /* Return code */ - VdbeSorter *pSorter = pCsr->pSorter; - FileWriter writer; + PmaWriter writer; /* Object used to write to the file */ - memset(&writer, 0, sizeof(FileWriter)); +#ifdef SQLITE_DEBUG + /* Set iSz to the expected size of file pTask->file after writing the PMA. + ** This is used by an assert() statement at the end of this function. */ + i64 iSz = pList->szPMA + sqlite3VarintLen(pList->szPMA) + pTask->file.iEof; +#endif - if( pSorter->nInMemory==0 ){ - assert( pSorter->pRecord==0 ); - return rc; + vdbeSorterWorkDebug(pTask, "enter"); + memset(&writer, 0, sizeof(PmaWriter)); + assert( pList->szPMA>0 ); + + /* If the first temporary PMA file has not been opened, open it now. */ + if( pTask->file.pFd==0 ){ + rc = vdbeSorterOpenTempFile(db, 0, &pTask->file.pFd); + assert( rc!=SQLITE_OK || pTask->file.pFd ); + assert( pTask->file.iEof==0 ); + assert( pTask->nPMA==0 ); } - rc = vdbeSorterSort(pCsr); + /* Try to get the file to memory map */ + if( rc==SQLITE_OK ){ + vdbeSorterExtendFile(db, pTask->file.pFd, pTask->file.iEof+pList->szPMA+9); + } - /* If the first temporary PMA file has not been opened, open it now. */ - if( rc==SQLITE_OK && pSorter->pTemp1==0 ){ - rc = vdbeSorterOpenTempFile(db, &pSorter->pTemp1); - assert( rc!=SQLITE_OK || pSorter->pTemp1 ); - assert( pSorter->iWriteOff==0 ); - assert( pSorter->nPMA==0 ); + /* Sort the list */ + if( rc==SQLITE_OK ){ + rc = vdbeSorterSort(pTask, pList); } if( rc==SQLITE_OK ){ SorterRecord *p; SorterRecord *pNext = 0; - fileWriterInit(db, pSorter->pTemp1, &writer, pSorter->iWriteOff); - pSorter->nPMA++; - fileWriterWriteVarint(&writer, pSorter->nInMemory); - for(p=pSorter->pRecord; p; p=pNext){ - pNext = p->pNext; - fileWriterWriteVarint(&writer, p->nVal); - fileWriterWrite(&writer, p->pVal, p->nVal); - sqlite3DbFree(db, p); + vdbePmaWriterInit(pTask->file.pFd, &writer, pTask->pSorter->pgsz, + pTask->file.iEof); + pTask->nPMA++; + vdbePmaWriteVarint(&writer, pList->szPMA); + for(p=pList->pList; p; p=pNext){ + pNext = p->u.pNext; + vdbePmaWriteVarint(&writer, p->nVal); + vdbePmaWriteBlob(&writer, SRVAL(p), p->nVal); + if( pList->aMemory==0 ) sqlite3_free(p); } - pSorter->pRecord = p; - rc = fileWriterFinish(db, &writer, &pSorter->iWriteOff); + pList->pList = p; + rc = vdbePmaWriterFinish(&writer, &pTask->file.iEof); } + vdbeSorterWorkDebug(pTask, "exit"); + assert( rc!=SQLITE_OK || pList->pList==0 ); + assert( rc!=SQLITE_OK || pTask->file.iEof==iSz ); return rc; } /* +** Advance the MergeEngine to its next entry. +** Set *pbEof to true there is no next entry because +** the MergeEngine has reached the end of all its inputs. +** +** Return SQLITE_OK if successful or an error code if an error occurs. +*/ +static int vdbeMergeEngineStep( + MergeEngine *pMerger, /* The merge engine to advance to the next row */ + int *pbEof /* Set TRUE at EOF. Set false for more content */ +){ + int rc; + int iPrev = pMerger->aTree[1];/* Index of PmaReader to advance */ + SortSubtask *pTask = pMerger->pTask; + + /* Advance the current PmaReader */ + rc = vdbePmaReaderNext(&pMerger->aReadr[iPrev]); + + /* Update contents of aTree[] */ + if( rc==SQLITE_OK ){ + int i; /* Index of aTree[] to recalculate */ + PmaReader *pReadr1; /* First PmaReader to compare */ + PmaReader *pReadr2; /* Second PmaReader to compare */ + u8 *pKey2; /* To pReadr2->aKey, or 0 if record cached */ + + /* Find the first two PmaReaders to compare. The one that was just + ** advanced (iPrev) and the one next to it in the array. */ + pReadr1 = &pMerger->aReadr[(iPrev & 0xFFFE)]; + pReadr2 = &pMerger->aReadr[(iPrev | 0x0001)]; + pKey2 = pReadr2->aKey; + + for(i=(pMerger->nTree+iPrev)/2; i>0; i=i/2){ + /* Compare pReadr1 and pReadr2. Store the result in variable iRes. */ + int iRes; + if( pReadr1->pFd==0 ){ + iRes = +1; + }else if( pReadr2->pFd==0 ){ + iRes = -1; + }else{ + iRes = vdbeSorterCompare(pTask, + pReadr1->aKey, pReadr1->nKey, pKey2, pReadr2->nKey + ); + } + + /* If pReadr1 contained the smaller value, set aTree[i] to its index. + ** Then set pReadr2 to the next PmaReader to compare to pReadr1. In this + ** case there is no cache of pReadr2 in pTask->pUnpacked, so set + ** pKey2 to point to the record belonging to pReadr2. + ** + ** Alternatively, if pReadr2 contains the smaller of the two values, + ** set aTree[i] to its index and update pReadr1. If vdbeSorterCompare() + ** was actually called above, then pTask->pUnpacked now contains + ** a value equivalent to pReadr2. So set pKey2 to NULL to prevent + ** vdbeSorterCompare() from decoding pReadr2 again. + ** + ** If the two values were equal, then the value from the oldest + ** PMA should be considered smaller. The VdbeSorter.aReadr[] array + ** is sorted from oldest to newest, so pReadr1 contains older values + ** than pReadr2 iff (pReadr1aTree[i] = (int)(pReadr1 - pMerger->aReadr); + pReadr2 = &pMerger->aReadr[ pMerger->aTree[i ^ 0x0001] ]; + pKey2 = pReadr2->aKey; + }else{ + if( pReadr1->pFd ) pKey2 = 0; + pMerger->aTree[i] = (int)(pReadr2 - pMerger->aReadr); + pReadr1 = &pMerger->aReadr[ pMerger->aTree[i ^ 0x0001] ]; + } + } + *pbEof = (pMerger->aReadr[pMerger->aTree[1]].pFd==0); + } + + return (rc==SQLITE_OK ? pTask->pUnpacked->errCode : rc); +} + +#if SQLITE_MAX_WORKER_THREADS>0 +/* +** The main routine for background threads that write level-0 PMAs. +*/ +static void *vdbeSorterFlushThread(void *pCtx){ + SortSubtask *pTask = (SortSubtask*)pCtx; + int rc; /* Return code */ + assert( pTask->bDone==0 ); + rc = vdbeSorterListToPMA(pTask, &pTask->list); + pTask->bDone = 1; + return SQLITE_INT_TO_PTR(rc); +} +#endif /* SQLITE_MAX_WORKER_THREADS>0 */ + +/* +** Flush the current contents of VdbeSorter.list to a new PMA, possibly +** using a background thread. +*/ +static int vdbeSorterFlushPMA(VdbeSorter *pSorter){ +#if SQLITE_MAX_WORKER_THREADS==0 + pSorter->bUsePMA = 1; + return vdbeSorterListToPMA(&pSorter->aTask[0], &pSorter->list); +#else + int rc = SQLITE_OK; + int i; + SortSubtask *pTask = 0; /* Thread context used to create new PMA */ + int nWorker = (pSorter->nTask-1); + + /* Set the flag to indicate that at least one PMA has been written. + ** Or will be, anyhow. */ + pSorter->bUsePMA = 1; + + /* Select a sub-task to sort and flush the current list of in-memory + ** records to disk. If the sorter is running in multi-threaded mode, + ** round-robin between the first (pSorter->nTask-1) tasks. Except, if + ** the background thread from a sub-tasks previous turn is still running, + ** skip it. If the first (pSorter->nTask-1) sub-tasks are all still busy, + ** fall back to using the final sub-task. The first (pSorter->nTask-1) + ** sub-tasks are prefered as they use background threads - the final + ** sub-task uses the main thread. */ + for(i=0; iiPrev + i + 1) % nWorker; + pTask = &pSorter->aTask[iTest]; + if( pTask->bDone ){ + rc = vdbeSorterJoinThread(pTask); + } + if( rc!=SQLITE_OK || pTask->pThread==0 ) break; + } + + if( rc==SQLITE_OK ){ + if( i==nWorker ){ + /* Use the foreground thread for this operation */ + rc = vdbeSorterListToPMA(&pSorter->aTask[nWorker], &pSorter->list); + }else{ + /* Launch a background thread for this operation */ + u8 *aMem = pTask->list.aMemory; + void *pCtx = (void*)pTask; + + assert( pTask->pThread==0 && pTask->bDone==0 ); + assert( pTask->list.pList==0 ); + assert( pTask->list.aMemory==0 || pSorter->list.aMemory!=0 ); + + pSorter->iPrev = (u8)(pTask - pSorter->aTask); + pTask->list = pSorter->list; + pSorter->list.pList = 0; + pSorter->list.szPMA = 0; + if( aMem ){ + pSorter->list.aMemory = aMem; + pSorter->nMemory = sqlite3MallocSize(aMem); + }else if( pSorter->list.aMemory ){ + pSorter->list.aMemory = sqlite3Malloc(pSorter->nMemory); + if( !pSorter->list.aMemory ) return SQLITE_NOMEM; + } + + rc = vdbeSorterCreateThread(pTask, vdbeSorterFlushThread, pCtx); + } + } + + return rc; +#endif /* SQLITE_MAX_WORKER_THREADS!=0 */ +} + +/* ** Add a record to the sorter. */ SQLITE_PRIVATE int sqlite3VdbeSorterWrite( - sqlite3 *db, /* Database handle */ - const VdbeCursor *pCsr, /* Sorter cursor */ + const VdbeCursor *pCsr, /* Sorter cursor */ Mem *pVal /* Memory cell containing record */ ){ VdbeSorter *pSorter = pCsr->pSorter; int rc = SQLITE_OK; /* Return Code */ SorterRecord *pNew; /* New list element */ + int bFlush; /* True to flush contents of memory to PMA */ + int nReq; /* Bytes of memory required */ + int nPMA; /* Bytes of PMA space required */ + assert( pSorter ); - pSorter->nInMemory += sqlite3VarintLen(pVal->n) + pVal->n; - pNew = (SorterRecord *)sqlite3DbMallocRaw(db, pVal->n + sizeof(SorterRecord)); - if( pNew==0 ){ - rc = SQLITE_NOMEM; - }else{ - pNew->pVal = (void *)&pNew[1]; - memcpy(pNew->pVal, pVal->z, pVal->n); - pNew->nVal = pVal->n; - pNew->pNext = pSorter->pRecord; - pSorter->pRecord = pNew; - } - - /* See if the contents of the sorter should now be written out. They - ** are written out when either of the following are true: + /* Figure out whether or not the current contents of memory should be + ** flushed to a PMA before continuing. If so, do so. ** + ** If using the single large allocation mode (pSorter->aMemory!=0), then + ** flush the contents of memory to a new PMA if (a) at least one value is + ** already in memory and (b) the new value will not fit in memory. + ** + ** Or, if using separate allocations for each record, flush the contents + ** of memory to a PMA if either of the following are true: + ** ** * The total memory allocated for the in-memory list is greater ** than (page-size * cache-size), or ** ** * The total memory allocated for the in-memory list is greater ** than (page-size * 10) and sqlite3HeapNearlyFull() returns true. */ - if( rc==SQLITE_OK && pSorter->mxPmaSize>0 && ( - (pSorter->nInMemory>pSorter->mxPmaSize) - || (pSorter->nInMemory>pSorter->mnPmaSize && sqlite3HeapNearlyFull()) - )){ -#ifdef SQLITE_DEBUG - i64 nExpect = pSorter->iWriteOff - + sqlite3VarintLen(pSorter->nInMemory) - + pSorter->nInMemory; + nReq = pVal->n + sizeof(SorterRecord); + nPMA = pVal->n + sqlite3VarintLen(pVal->n); + if( pSorter->mxPmaSize ){ + if( pSorter->list.aMemory ){ + bFlush = pSorter->iMemory && (pSorter->iMemory+nReq) > pSorter->mxPmaSize; + }else{ + bFlush = ( + (pSorter->list.szPMA > pSorter->mxPmaSize) + || (pSorter->list.szPMA > pSorter->mnPmaSize && sqlite3HeapNearlyFull()) + ); + } + if( bFlush ){ + rc = vdbeSorterFlushPMA(pSorter); + pSorter->list.szPMA = 0; + pSorter->iMemory = 0; + assert( rc!=SQLITE_OK || pSorter->list.pList==0 ); + } + } + + pSorter->list.szPMA += nPMA; + if( nPMA>pSorter->mxKeysize ){ + pSorter->mxKeysize = nPMA; + } + + if( pSorter->list.aMemory ){ + int nMin = pSorter->iMemory + nReq; + + if( nMin>pSorter->nMemory ){ + u8 *aNew; + int nNew = pSorter->nMemory * 2; + while( nNew < nMin ) nNew = nNew*2; + if( nNew > pSorter->mxPmaSize ) nNew = pSorter->mxPmaSize; + if( nNew < nMin ) nNew = nMin; + + aNew = sqlite3Realloc(pSorter->list.aMemory, nNew); + if( !aNew ) return SQLITE_NOMEM; + pSorter->list.pList = (SorterRecord*)( + aNew + ((u8*)pSorter->list.pList - pSorter->list.aMemory) + ); + pSorter->list.aMemory = aNew; + pSorter->nMemory = nNew; + } + + pNew = (SorterRecord*)&pSorter->list.aMemory[pSorter->iMemory]; + pSorter->iMemory += ROUND8(nReq); + pNew->u.iNext = (int)((u8*)(pSorter->list.pList) - pSorter->list.aMemory); + }else{ + pNew = (SorterRecord *)sqlite3Malloc(nReq); + if( pNew==0 ){ + return SQLITE_NOMEM; + } + pNew->u.pNext = pSorter->list.pList; + } + + memcpy(SRVAL(pNew), pVal->z, pVal->n); + pNew->nVal = pVal->n; + pSorter->list.pList = pNew; + + return rc; +} + +/* +** Read keys from pIncr->pMerger and populate pIncr->aFile[1]. The format +** of the data stored in aFile[1] is the same as that used by regular PMAs, +** except that the number-of-bytes varint is omitted from the start. +*/ +static int vdbeIncrPopulate(IncrMerger *pIncr){ + int rc = SQLITE_OK; + int rc2; + i64 iStart = pIncr->iStartOff; + SorterFile *pOut = &pIncr->aFile[1]; + SortSubtask *pTask = pIncr->pTask; + MergeEngine *pMerger = pIncr->pMerger; + PmaWriter writer; + assert( pIncr->bEof==0 ); + + vdbeSorterPopulateDebug(pTask, "enter"); + + vdbePmaWriterInit(pOut->pFd, &writer, pTask->pSorter->pgsz, iStart); + while( rc==SQLITE_OK ){ + int dummy; + PmaReader *pReader = &pMerger->aReadr[ pMerger->aTree[1] ]; + int nKey = pReader->nKey; + i64 iEof = writer.iWriteOff + writer.iBufEnd; + + /* Check if the output file is full or if the input has been exhausted. + ** In either case exit the loop. */ + if( pReader->pFd==0 ) break; + if( (iEof + nKey + sqlite3VarintLen(nKey))>(iStart + pIncr->mxSz) ) break; + + /* Write the next key to the output. */ + vdbePmaWriteVarint(&writer, nKey); + vdbePmaWriteBlob(&writer, pReader->aKey, nKey); + assert( pIncr->pMerger->pTask==pTask ); + rc = vdbeMergeEngineStep(pIncr->pMerger, &dummy); + } + + rc2 = vdbePmaWriterFinish(&writer, &pOut->iEof); + if( rc==SQLITE_OK ) rc = rc2; + vdbeSorterPopulateDebug(pTask, "exit"); + return rc; +} + +#if SQLITE_MAX_WORKER_THREADS>0 +/* +** The main routine for background threads that populate aFile[1] of +** multi-threaded IncrMerger objects. +*/ +static void *vdbeIncrPopulateThread(void *pCtx){ + IncrMerger *pIncr = (IncrMerger*)pCtx; + void *pRet = SQLITE_INT_TO_PTR( vdbeIncrPopulate(pIncr) ); + pIncr->pTask->bDone = 1; + return pRet; +} + +/* +** Launch a background thread to populate aFile[1] of pIncr. +*/ +static int vdbeIncrBgPopulate(IncrMerger *pIncr){ + void *p = (void*)pIncr; + assert( pIncr->bUseThread ); + return vdbeSorterCreateThread(pIncr->pTask, vdbeIncrPopulateThread, p); +} #endif - rc = vdbeSorterListToPMA(db, pCsr); - pSorter->nInMemory = 0; - assert( rc!=SQLITE_OK || (nExpect==pSorter->iWriteOff) ); + +/* +** This function is called when the PmaReader corresponding to pIncr has +** finished reading the contents of aFile[0]. Its purpose is to "refill" +** aFile[0] such that the PmaReader should start rereading it from the +** beginning. +** +** For single-threaded objects, this is accomplished by literally reading +** keys from pIncr->pMerger and repopulating aFile[0]. +** +** For multi-threaded objects, all that is required is to wait until the +** background thread is finished (if it is not already) and then swap +** aFile[0] and aFile[1] in place. If the contents of pMerger have not +** been exhausted, this function also launches a new background thread +** to populate the new aFile[1]. +** +** SQLITE_OK is returned on success, or an SQLite error code otherwise. +*/ +static int vdbeIncrSwap(IncrMerger *pIncr){ + int rc = SQLITE_OK; + +#if SQLITE_MAX_WORKER_THREADS>0 + if( pIncr->bUseThread ){ + rc = vdbeSorterJoinThread(pIncr->pTask); + + if( rc==SQLITE_OK ){ + SorterFile f0 = pIncr->aFile[0]; + pIncr->aFile[0] = pIncr->aFile[1]; + pIncr->aFile[1] = f0; + } + + if( rc==SQLITE_OK ){ + if( pIncr->aFile[0].iEof==pIncr->iStartOff ){ + pIncr->bEof = 1; + }else{ + rc = vdbeIncrBgPopulate(pIncr); + } + } + }else +#endif + { + rc = vdbeIncrPopulate(pIncr); + pIncr->aFile[0] = pIncr->aFile[1]; + if( pIncr->aFile[0].iEof==pIncr->iStartOff ){ + pIncr->bEof = 1; + } } return rc; } /* -** Helper function for sqlite3VdbeSorterRewind(). +** Allocate and return a new IncrMerger object to read data from pMerger. +** +** If an OOM condition is encountered, return NULL. In this case free the +** pMerger argument before returning. */ -static int vdbeSorterInitMerge( - sqlite3 *db, /* Database handle */ - const VdbeCursor *pCsr, /* Cursor handle for this sorter */ - i64 *pnByte /* Sum of bytes in all opened PMAs */ +static int vdbeIncrMergerNew( + SortSubtask *pTask, /* The thread that will be using the new IncrMerger */ + MergeEngine *pMerger, /* The MergeEngine that the IncrMerger will control */ + IncrMerger **ppOut /* Write the new IncrMerger here */ ){ - VdbeSorter *pSorter = pCsr->pSorter; + int rc = SQLITE_OK; + IncrMerger *pIncr = *ppOut = (IncrMerger*) + (sqlite3FaultSim(100) ? 0 : sqlite3MallocZero(sizeof(*pIncr))); + if( pIncr ){ + pIncr->pMerger = pMerger; + pIncr->pTask = pTask; + pIncr->mxSz = MAX(pTask->pSorter->mxKeysize+9,pTask->pSorter->mxPmaSize/2); + pTask->file2.iEof += pIncr->mxSz; + }else{ + vdbeMergeEngineFree(pMerger); + rc = SQLITE_NOMEM; + } + return rc; +} + +#if SQLITE_MAX_WORKER_THREADS>0 +/* +** Set the "use-threads" flag on object pIncr. +*/ +static void vdbeIncrMergerSetThreads(IncrMerger *pIncr){ + pIncr->bUseThread = 1; + pIncr->pTask->file2.iEof -= pIncr->mxSz; +} +#endif /* SQLITE_MAX_WORKER_THREADS>0 */ + + + +/* +** Recompute pMerger->aTree[iOut] by comparing the next keys on the +** two PmaReaders that feed that entry. Neither of the PmaReaders +** are advanced. This routine merely does the comparison. +*/ +static void vdbeMergeEngineCompare( + MergeEngine *pMerger, /* Merge engine containing PmaReaders to compare */ + int iOut /* Store the result in pMerger->aTree[iOut] */ +){ + int i1; + int i2; + int iRes; + PmaReader *p1; + PmaReader *p2; + + assert( iOutnTree && iOut>0 ); + + if( iOut>=(pMerger->nTree/2) ){ + i1 = (iOut - pMerger->nTree/2) * 2; + i2 = i1 + 1; + }else{ + i1 = pMerger->aTree[iOut*2]; + i2 = pMerger->aTree[iOut*2+1]; + } + + p1 = &pMerger->aReadr[i1]; + p2 = &pMerger->aReadr[i2]; + + if( p1->pFd==0 ){ + iRes = i2; + }else if( p2->pFd==0 ){ + iRes = i1; + }else{ + int res; + assert( pMerger->pTask->pUnpacked!=0 ); /* from vdbeSortSubtaskMain() */ + res = vdbeSorterCompare( + pMerger->pTask, p1->aKey, p1->nKey, p2->aKey, p2->nKey + ); + if( res<=0 ){ + iRes = i1; + }else{ + iRes = i2; + } + } + + pMerger->aTree[iOut] = iRes; +} + +/* +** Allowed values for the eMode parameter to vdbeMergeEngineInit() +** and vdbePmaReaderIncrMergeInit(). +** +** Only INCRINIT_NORMAL is valid in single-threaded builds (when +** SQLITE_MAX_WORKER_THREADS==0). The other values are only used +** when there exists one or more separate worker threads. +*/ +#define INCRINIT_NORMAL 0 +#define INCRINIT_TASK 1 +#define INCRINIT_ROOT 2 + +/* Forward reference. +** The vdbeIncrMergeInit() and vdbePmaReaderIncrMergeInit() routines call each +** other (when building a merge tree). +*/ +static int vdbePmaReaderIncrMergeInit(PmaReader *pReadr, int eMode); + +/* +** Initialize the MergeEngine object passed as the second argument. Once this +** function returns, the first key of merged data may be read from the +** MergeEngine object in the usual fashion. +** +** If argument eMode is INCRINIT_ROOT, then it is assumed that any IncrMerge +** objects attached to the PmaReader objects that the merger reads from have +** already been populated, but that they have not yet populated aFile[0] and +** set the PmaReader objects up to read from it. In this case all that is +** required is to call vdbePmaReaderNext() on each PmaReader to point it at +** its first key. +** +** Otherwise, if eMode is any value other than INCRINIT_ROOT, then use +** vdbePmaReaderIncrMergeInit() to initialize each PmaReader that feeds data +** to pMerger. +** +** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +*/ +static int vdbeMergeEngineInit( + SortSubtask *pTask, /* Thread that will run pMerger */ + MergeEngine *pMerger, /* MergeEngine to initialize */ + int eMode /* One of the INCRINIT_XXX constants */ +){ int rc = SQLITE_OK; /* Return code */ - int i; /* Used to iterator through aIter[] */ - i64 nByte = 0; /* Total bytes in all opened PMAs */ + int i; /* For looping over PmaReader objects */ + int nTree = pMerger->nTree; - /* Initialize the iterators. */ - for(i=0; iaIter[i]; - rc = vdbeSorterIterInit(db, pSorter, pSorter->iReadOff, pIter, &nByte); - pSorter->iReadOff = pIter->iEof; - assert( rc!=SQLITE_OK || pSorter->iReadOff<=pSorter->iWriteOff ); - if( rc!=SQLITE_OK || pSorter->iReadOff>=pSorter->iWriteOff ) break; + /* eMode is always INCRINIT_NORMAL in single-threaded mode */ + assert( SQLITE_MAX_WORKER_THREADS>0 || eMode==INCRINIT_NORMAL ); + + /* Verify that the MergeEngine is assigned to a single thread */ + assert( pMerger->pTask==0 ); + pMerger->pTask = pTask; + + for(i=0; i0 && eMode==INCRINIT_ROOT ){ + /* PmaReaders should be normally initialized in order, as if they are + ** reading from the same temp file this makes for more linear file IO. + ** However, in the INCRINIT_ROOT case, if PmaReader aReadr[nTask-1] is + ** in use it will block the vdbePmaReaderNext() call while it uses + ** the main thread to fill its buffer. So calling PmaReaderNext() + ** on this PmaReader before any of the multi-threaded PmaReaders takes + ** better advantage of multi-processor hardware. */ + rc = vdbePmaReaderNext(&pMerger->aReadr[nTree-i-1]); + }else{ + rc = vdbePmaReaderIncrMergeInit(&pMerger->aReadr[i], INCRINIT_NORMAL); + } + if( rc!=SQLITE_OK ) return rc; } - /* Initialize the aTree[] array. */ - for(i=pSorter->nTree-1; rc==SQLITE_OK && i>0; i--){ - rc = vdbeSorterDoCompare(pCsr, i); + for(i=pMerger->nTree-1; i>0; i--){ + vdbeMergeEngineCompare(pMerger, i); } + return pTask->pUnpacked->errCode; +} - *pnByte = nByte; +/* +** Initialize the IncrMerge field of a PmaReader. +** +** If the PmaReader passed as the first argument is not an incremental-reader +** (if pReadr->pIncr==0), then this function is a no-op. Otherwise, it serves +** to open and/or initialize the temp file related fields of the IncrMerge +** object at (pReadr->pIncr). +** +** If argument eMode is set to INCRINIT_NORMAL, then all PmaReaders +** in the sub-tree headed by pReadr are also initialized. Data is then loaded +** into the buffers belonging to pReadr and it is set to +** point to the first key in its range. +** +** If argument eMode is set to INCRINIT_TASK, then pReadr is guaranteed +** to be a multi-threaded PmaReader and this function is being called in a +** background thread. In this case all PmaReaders in the sub-tree are +** initialized as for INCRINIT_NORMAL and the aFile[1] buffer belonging to +** pReadr is populated. However, pReadr itself is not set up to point +** to its first key. A call to vdbePmaReaderNext() is still required to do +** that. +** +** The reason this function does not call vdbePmaReaderNext() immediately +** in the INCRINIT_TASK case is that vdbePmaReaderNext() assumes that it has +** to block on thread (pTask->thread) before accessing aFile[1]. But, since +** this entire function is being run by thread (pTask->thread), that will +** lead to the current background thread attempting to join itself. +** +** Finally, if argument eMode is set to INCRINIT_ROOT, it may be assumed +** that pReadr->pIncr is a multi-threaded IncrMerge objects, and that all +** child-trees have already been initialized using IncrInit(INCRINIT_TASK). +** In this case vdbePmaReaderNext() is called on all child PmaReaders and +** the current PmaReader set to point to the first key in its range. +** +** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +*/ +static int vdbePmaReaderIncrMergeInit(PmaReader *pReadr, int eMode){ + int rc = SQLITE_OK; + IncrMerger *pIncr = pReadr->pIncr; + + /* eMode is always INCRINIT_NORMAL in single-threaded mode */ + assert( SQLITE_MAX_WORKER_THREADS>0 || eMode==INCRINIT_NORMAL ); + + if( pIncr ){ + SortSubtask *pTask = pIncr->pTask; + sqlite3 *db = pTask->pSorter->db; + + rc = vdbeMergeEngineInit(pTask, pIncr->pMerger, eMode); + + /* Set up the required files for pIncr. A multi-theaded IncrMerge object + ** requires two temp files to itself, whereas a single-threaded object + ** only requires a region of pTask->file2. */ + if( rc==SQLITE_OK ){ + int mxSz = pIncr->mxSz; +#if SQLITE_MAX_WORKER_THREADS>0 + if( pIncr->bUseThread ){ + rc = vdbeSorterOpenTempFile(db, mxSz, &pIncr->aFile[0].pFd); + if( rc==SQLITE_OK ){ + rc = vdbeSorterOpenTempFile(db, mxSz, &pIncr->aFile[1].pFd); + } + }else +#endif + /*if( !pIncr->bUseThread )*/{ + if( pTask->file2.pFd==0 ){ + assert( pTask->file2.iEof>0 ); + rc = vdbeSorterOpenTempFile(db, pTask->file2.iEof, &pTask->file2.pFd); + pTask->file2.iEof = 0; + } + if( rc==SQLITE_OK ){ + pIncr->aFile[1].pFd = pTask->file2.pFd; + pIncr->iStartOff = pTask->file2.iEof; + pTask->file2.iEof += mxSz; + } + } + } + +#if SQLITE_MAX_WORKER_THREADS>0 + if( rc==SQLITE_OK && pIncr->bUseThread ){ + /* Use the current thread to populate aFile[1], even though this + ** PmaReader is multi-threaded. The reason being that this function + ** is already running in background thread pIncr->pTask->thread. */ + assert( eMode==INCRINIT_ROOT || eMode==INCRINIT_TASK ); + rc = vdbeIncrPopulate(pIncr); + } +#endif + + if( rc==SQLITE_OK + && (SQLITE_MAX_WORKER_THREADS==0 || eMode!=INCRINIT_TASK) + ){ + rc = vdbePmaReaderNext(pReadr); + } + } return rc; } +#if SQLITE_MAX_WORKER_THREADS>0 /* -** Once the sorter has been populated, this function is called to prepare -** for iterating through its contents in sorted order. +** The main routine for vdbePmaReaderIncrMergeInit() operations run in +** background threads. */ -SQLITE_PRIVATE int sqlite3VdbeSorterRewind(sqlite3 *db, const VdbeCursor *pCsr, int *pbEof){ - VdbeSorter *pSorter = pCsr->pSorter; - int rc; /* Return code */ - sqlite3_file *pTemp2 = 0; /* Second temp file to use */ - i64 iWrite2 = 0; /* Write offset for pTemp2 */ - int nIter; /* Number of iterators used */ - int nByte; /* Bytes of space required for aIter/aTree */ - int N = 2; /* Power of 2 >= nIter */ +static void *vdbePmaReaderBgInit(void *pCtx){ + PmaReader *pReader = (PmaReader*)pCtx; + void *pRet = SQLITE_INT_TO_PTR( + vdbePmaReaderIncrMergeInit(pReader,INCRINIT_TASK) + ); + pReader->pIncr->pTask->bDone = 1; + return pRet; +} - assert( pSorter ); +/* +** Use a background thread to invoke vdbePmaReaderIncrMergeInit(INCRINIT_TASK) +** on the PmaReader object passed as the first argument. +** +** This call will initialize the various fields of the pReadr->pIncr +** structure and, if it is a multi-threaded IncrMerger, launch a +** background thread to populate aFile[1]. +*/ +static int vdbePmaReaderBgIncrInit(PmaReader *pReadr){ + void *pCtx = (void*)pReadr; + return vdbeSorterCreateThread(pReadr->pIncr->pTask, vdbePmaReaderBgInit, pCtx); +} +#endif - /* If no data has been written to disk, then do not do so now. Instead, - ** sort the VdbeSorter.pRecord list. The vdbe layer will read data directly - ** from the in-memory list. */ - if( pSorter->nPMA==0 ){ - *pbEof = !pSorter->pRecord; - assert( pSorter->aTree==0 ); - return vdbeSorterSort(pCsr); +/* +** Allocate a new MergeEngine object to merge the contents of nPMA level-0 +** PMAs from pTask->file. If no error occurs, set *ppOut to point to +** the new object and return SQLITE_OK. Or, if an error does occur, set *ppOut +** to NULL and return an SQLite error code. +** +** When this function is called, *piOffset is set to the offset of the +** first PMA to read from pTask->file. Assuming no error occurs, it is +** set to the offset immediately following the last byte of the last +** PMA before returning. If an error does occur, then the final value of +** *piOffset is undefined. +*/ +static int vdbeMergeEngineLevel0( + SortSubtask *pTask, /* Sorter task to read from */ + int nPMA, /* Number of PMAs to read */ + i64 *piOffset, /* IN/OUT: Readr offset in pTask->file */ + MergeEngine **ppOut /* OUT: New merge-engine */ +){ + MergeEngine *pNew; /* Merge engine to return */ + i64 iOff = *piOffset; + int i; + int rc = SQLITE_OK; + + *ppOut = pNew = vdbeMergeEngineNew(nPMA); + if( pNew==0 ) rc = SQLITE_NOMEM; + + for(i=0; iaReadr[i]; + rc = vdbePmaReaderInit(pTask, &pTask->file, iOff, pReadr, &nDummy); + iOff = pReadr->iEof; } - /* Write the current in-memory list to a PMA. */ - rc = vdbeSorterListToPMA(db, pCsr); - if( rc!=SQLITE_OK ) return rc; + if( rc!=SQLITE_OK ){ + vdbeMergeEngineFree(pNew); + *ppOut = 0; + } + *piOffset = iOff; + return rc; +} - /* Allocate space for aIter[] and aTree[]. */ - nIter = pSorter->nPMA; - if( nIter>SORTER_MAX_MERGE_COUNT ) nIter = SORTER_MAX_MERGE_COUNT; - assert( nIter>0 ); - while( NaIter = (VdbeSorterIter *)sqlite3DbMallocZero(db, nByte); - if( !pSorter->aIter ) return SQLITE_NOMEM; - pSorter->aTree = (int *)&pSorter->aIter[N]; - pSorter->nTree = N; +/* +** Return the depth of a tree comprising nPMA PMAs, assuming a fanout of +** SORTER_MAX_MERGE_COUNT. The returned value does not include leaf nodes. +** +** i.e. +** +** nPMA<=16 -> TreeDepth() == 0 +** nPMA<=256 -> TreeDepth() == 1 +** nPMA<=65536 -> TreeDepth() == 2 +*/ +static int vdbeSorterTreeDepth(int nPMA){ + int nDepth = 0; + i64 nDiv = SORTER_MAX_MERGE_COUNT; + while( nDiv < (i64)nPMA ){ + nDiv = nDiv * SORTER_MAX_MERGE_COUNT; + nDepth++; + } + return nDepth; +} - do { - int iNew; /* Index of new, merged, PMA */ +/* +** pRoot is the root of an incremental merge-tree with depth nDepth (according +** to vdbeSorterTreeDepth()). pLeaf is the iSeq'th leaf to be added to the +** tree, counting from zero. This function adds pLeaf to the tree. +** +** If successful, SQLITE_OK is returned. If an error occurs, an SQLite error +** code is returned and pLeaf is freed. +*/ +static int vdbeSorterAddToTree( + SortSubtask *pTask, /* Task context */ + int nDepth, /* Depth of tree according to TreeDepth() */ + int iSeq, /* Sequence number of leaf within tree */ + MergeEngine *pRoot, /* Root of tree */ + MergeEngine *pLeaf /* Leaf to add to tree */ +){ + int rc = SQLITE_OK; + int nDiv = 1; + int i; + MergeEngine *p = pRoot; + IncrMerger *pIncr; - for(iNew=0; - rc==SQLITE_OK && iNew*SORTER_MAX_MERGE_COUNTnPMA; - iNew++ - ){ - int rc2; /* Return code from fileWriterFinish() */ - FileWriter writer; /* Object used to write to disk */ - i64 nWrite; /* Number of bytes in new PMA */ + rc = vdbeIncrMergerNew(pTask, pLeaf, &pIncr); - memset(&writer, 0, sizeof(FileWriter)); + for(i=1; iaIter[ pSorter->aTree[1] ].pFile ); - if( rc!=SQLITE_OK || pSorter->nPMA<=SORTER_MAX_MERGE_COUNT ){ - break; + for(i=1; iaReadr[iIter]; + + if( pReadr->pIncr==0 ){ + MergeEngine *pNew = vdbeMergeEngineNew(SORTER_MAX_MERGE_COUNT); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = vdbeIncrMergerNew(pTask, pNew, &pReadr->pIncr); } + } + if( rc==SQLITE_OK ){ + p = pReadr->pIncr->pMerger; + nDiv = nDiv / SORTER_MAX_MERGE_COUNT; + } + } - /* Open the second temp file, if it is not already open. */ - if( pTemp2==0 ){ - assert( iWrite2==0 ); - rc = vdbeSorterOpenTempFile(db, &pTemp2); + if( rc==SQLITE_OK ){ + p->aReadr[iSeq % SORTER_MAX_MERGE_COUNT].pIncr = pIncr; + }else{ + vdbeIncrFree(pIncr); + } + return rc; +} + +/* +** This function is called as part of a SorterRewind() operation on a sorter +** that has already written two or more level-0 PMAs to one or more temp +** files. It builds a tree of MergeEngine/IncrMerger/PmaReader objects that +** can be used to incrementally merge all PMAs on disk. +** +** If successful, SQLITE_OK is returned and *ppOut set to point to the +** MergeEngine object at the root of the tree before returning. Or, if an +** error occurs, an SQLite error code is returned and the final value +** of *ppOut is undefined. +*/ +static int vdbeSorterMergeTreeBuild( + VdbeSorter *pSorter, /* The VDBE cursor that implements the sort */ + MergeEngine **ppOut /* Write the MergeEngine here */ +){ + MergeEngine *pMain = 0; + int rc = SQLITE_OK; + int iTask; + +#if SQLITE_MAX_WORKER_THREADS>0 + /* If the sorter uses more than one task, then create the top-level + ** MergeEngine here. This MergeEngine will read data from exactly + ** one PmaReader per sub-task. */ + assert( pSorter->bUseThreads || pSorter->nTask==1 ); + if( pSorter->nTask>1 ){ + pMain = vdbeMergeEngineNew(pSorter->nTask); + if( pMain==0 ) rc = SQLITE_NOMEM; + } +#endif + + for(iTask=0; rc==SQLITE_OK && iTasknTask; iTask++){ + SortSubtask *pTask = &pSorter->aTask[iTask]; + assert( pTask->nPMA>0 || SQLITE_MAX_WORKER_THREADS>0 ); + if( SQLITE_MAX_WORKER_THREADS==0 || pTask->nPMA ){ + MergeEngine *pRoot = 0; /* Root node of tree for this task */ + int nDepth = vdbeSorterTreeDepth(pTask->nPMA); + i64 iReadOff = 0; + + if( pTask->nPMA<=SORTER_MAX_MERGE_COUNT ){ + rc = vdbeMergeEngineLevel0(pTask, pTask->nPMA, &iReadOff, &pRoot); + }else{ + int i; + int iSeq = 0; + pRoot = vdbeMergeEngineNew(SORTER_MAX_MERGE_COUNT); + if( pRoot==0 ) rc = SQLITE_NOMEM; + for(i=0; inPMA && rc==SQLITE_OK; i += SORTER_MAX_MERGE_COUNT){ + MergeEngine *pMerger = 0; /* New level-0 PMA merger */ + int nReader; /* Number of level-0 PMAs to merge */ + + nReader = MIN(pTask->nPMA - i, SORTER_MAX_MERGE_COUNT); + rc = vdbeMergeEngineLevel0(pTask, nReader, &iReadOff, &pMerger); + if( rc==SQLITE_OK ){ + rc = vdbeSorterAddToTree(pTask, nDepth, iSeq++, pRoot, pMerger); + } + } } if( rc==SQLITE_OK ){ - int bEof = 0; - fileWriterInit(db, pTemp2, &writer, iWrite2); - fileWriterWriteVarint(&writer, nWrite); - while( rc==SQLITE_OK && bEof==0 ){ - VdbeSorterIter *pIter = &pSorter->aIter[ pSorter->aTree[1] ]; - assert( pIter->pFile ); +#if SQLITE_MAX_WORKER_THREADS>0 + if( pMain!=0 ){ + rc = vdbeIncrMergerNew(pTask, pRoot, &pMain->aReadr[iTask].pIncr); + }else +#endif + { + assert( pMain==0 ); + pMain = pRoot; + } + }else{ + vdbeMergeEngineFree(pRoot); + } + } + } - fileWriterWriteVarint(&writer, pIter->nKey); - fileWriterWrite(&writer, pIter->aKey, pIter->nKey); - rc = sqlite3VdbeSorterNext(db, pCsr, &bEof); + if( rc!=SQLITE_OK ){ + vdbeMergeEngineFree(pMain); + pMain = 0; + } + *ppOut = pMain; + return rc; +} + +/* +** This function is called as part of an sqlite3VdbeSorterRewind() operation +** on a sorter that has written two or more PMAs to temporary files. It sets +** up either VdbeSorter.pMerger (for single threaded sorters) or pReader +** (for multi-threaded sorters) so that it can be used to iterate through +** all records stored in the sorter. +** +** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +*/ +static int vdbeSorterSetupMerge(VdbeSorter *pSorter){ + int rc; /* Return code */ + SortSubtask *pTask0 = &pSorter->aTask[0]; + MergeEngine *pMain = 0; +#if SQLITE_MAX_WORKER_THREADS + sqlite3 *db = pTask0->pSorter->db; +#endif + + rc = vdbeSorterMergeTreeBuild(pSorter, &pMain); + if( rc==SQLITE_OK ){ +#if SQLITE_MAX_WORKER_THREADS + assert( pSorter->bUseThreads==0 || pSorter->nTask>1 ); + if( pSorter->bUseThreads ){ + int iTask; + PmaReader *pReadr = 0; + SortSubtask *pLast = &pSorter->aTask[pSorter->nTask-1]; + rc = vdbeSortAllocUnpacked(pLast); + if( rc==SQLITE_OK ){ + pReadr = (PmaReader*)sqlite3DbMallocZero(db, sizeof(PmaReader)); + pSorter->pReader = pReadr; + if( pReadr==0 ) rc = SQLITE_NOMEM; + } + if( rc==SQLITE_OK ){ + rc = vdbeIncrMergerNew(pLast, pMain, &pReadr->pIncr); + if( rc==SQLITE_OK ){ + vdbeIncrMergerSetThreads(pReadr->pIncr); + for(iTask=0; iTask<(pSorter->nTask-1); iTask++){ + IncrMerger *pIncr; + if( (pIncr = pMain->aReadr[iTask].pIncr) ){ + vdbeIncrMergerSetThreads(pIncr); + assert( pIncr->pTask!=pLast ); + } + } + for(iTask=0; rc==SQLITE_OK && iTasknTask; iTask++){ + PmaReader *p = &pMain->aReadr[iTask]; + assert( p->pIncr==0 || p->pIncr->pTask==&pSorter->aTask[iTask] ); + if( p->pIncr ){ + if( iTask==pSorter->nTask-1 ){ + rc = vdbePmaReaderIncrMergeInit(p, INCRINIT_TASK); + }else{ + rc = vdbePmaReaderBgIncrInit(p); + } + } + } } - rc2 = fileWriterFinish(db, &writer, &iWrite2); - if( rc==SQLITE_OK ) rc = rc2; + pMain = 0; } + if( rc==SQLITE_OK ){ + rc = vdbePmaReaderIncrMergeInit(pReadr, INCRINIT_ROOT); + } + }else +#endif + { + rc = vdbeMergeEngineInit(pTask0, pMain, INCRINIT_NORMAL); + pSorter->pMerger = pMain; + pMain = 0; } + } - if( pSorter->nPMA<=SORTER_MAX_MERGE_COUNT ){ - break; + if( rc!=SQLITE_OK ){ + vdbeMergeEngineFree(pMain); + } + return rc; +} + + +/* +** Once the sorter has been populated by calls to sqlite3VdbeSorterWrite, +** this function is called to prepare for iterating through the records +** in sorted order. +*/ +SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *pCsr, int *pbEof){ + VdbeSorter *pSorter = pCsr->pSorter; + int rc = SQLITE_OK; /* Return code */ + + assert( pSorter ); + + /* If no data has been written to disk, then do not do so now. Instead, + ** sort the VdbeSorter.pRecord list. The vdbe layer will read data directly + ** from the in-memory list. */ + if( pSorter->bUsePMA==0 ){ + if( pSorter->list.pList ){ + *pbEof = 0; + rc = vdbeSorterSort(&pSorter->aTask[0], &pSorter->list); }else{ - sqlite3_file *pTmp = pSorter->pTemp1; - pSorter->nPMA = iNew; - pSorter->pTemp1 = pTemp2; - pTemp2 = pTmp; - pSorter->iWriteOff = iWrite2; - pSorter->iReadOff = 0; - iWrite2 = 0; + *pbEof = 1; } - }while( rc==SQLITE_OK ); + return rc; + } - if( pTemp2 ){ - sqlite3OsCloseFree(pTemp2); + /* Write the current in-memory list to a PMA. When the VdbeSorterWrite() + ** function flushes the contents of memory to disk, it immediately always + ** creates a new list consisting of a single key immediately afterwards. + ** So the list is never empty at this point. */ + assert( pSorter->list.pList ); + rc = vdbeSorterFlushPMA(pSorter); + + /* Join all threads */ + rc = vdbeSorterJoinAll(pSorter, rc); + + vdbeSorterRewindDebug("rewind"); + + /* Assuming no errors have occurred, set up a merger structure to + ** incrementally read and merge all remaining PMAs. */ + assert( pSorter->pReader==0 ); + if( rc==SQLITE_OK ){ + rc = vdbeSorterSetupMerge(pSorter); + *pbEof = 0; } - *pbEof = (pSorter->aIter[pSorter->aTree[1]].pFile==0); + + vdbeSorterRewindDebug("rewinddone"); return rc; } @@ -74885,22 +79528,28 @@ VdbeSorter *pSorter = pCsr->pSorter; int rc; /* Return code */ - if( pSorter->aTree ){ - int iPrev = pSorter->aTree[1];/* Index of iterator to advance */ - int i; /* Index of aTree[] to recalculate */ - - rc = vdbeSorterIterNext(db, &pSorter->aIter[iPrev]); - for(i=(pSorter->nTree+iPrev)/2; rc==SQLITE_OK && i>0; i=i/2){ - rc = vdbeSorterDoCompare(pCsr, i); + assert( pSorter->bUsePMA || (pSorter->pReader==0 && pSorter->pMerger==0) ); + if( pSorter->bUsePMA ){ + assert( pSorter->pReader==0 || pSorter->pMerger==0 ); + assert( pSorter->bUseThreads==0 || pSorter->pReader ); + assert( pSorter->bUseThreads==1 || pSorter->pMerger ); +#if SQLITE_MAX_WORKER_THREADS>0 + if( pSorter->bUseThreads ){ + rc = vdbePmaReaderNext(pSorter->pReader); + *pbEof = (pSorter->pReader->pFd==0); + }else +#endif + /*if( !pSorter->bUseThreads )*/ { + assert( pSorter->pMerger!=0 ); + assert( pSorter->pMerger->pTask==(&pSorter->aTask[0]) ); + rc = vdbeMergeEngineStep(pSorter->pMerger, pbEof); } - - *pbEof = (pSorter->aIter[pSorter->aTree[1]].pFile==0); }else{ - SorterRecord *pFree = pSorter->pRecord; - pSorter->pRecord = pFree->pNext; - pFree->pNext = 0; - vdbeSorterRecordFree(db, pFree); - *pbEof = !pSorter->pRecord; + SorterRecord *pFree = pSorter->list.pList; + pSorter->list.pList = pFree->u.pNext; + pFree->u.pNext = 0; + if( pSorter->list.aMemory==0 ) vdbeSorterRecordFree(db, pFree); + *pbEof = !pSorter->list.pList; rc = SQLITE_OK; } return rc; @@ -74915,14 +79564,21 @@ int *pnKey /* OUT: Size of current key in bytes */ ){ void *pKey; - if( pSorter->aTree ){ - VdbeSorterIter *pIter; - pIter = &pSorter->aIter[ pSorter->aTree[1] ]; - *pnKey = pIter->nKey; - pKey = pIter->aKey; + if( pSorter->bUsePMA ){ + PmaReader *pReader; +#if SQLITE_MAX_WORKER_THREADS>0 + if( pSorter->bUseThreads ){ + pReader = pSorter->pReader; + }else +#endif + /*if( !pSorter->bUseThreads )*/{ + pReader = &pSorter->pMerger->aReadr[pSorter->pMerger->aTree[1]]; + } + *pnKey = pReader->nKey; + pKey = pReader->aKey; }else{ - *pnKey = pSorter->pRecord->nVal; - pKey = pSorter->pRecord->pVal; + *pnKey = pSorter->list.pList->nVal; + pKey = SRVAL(pSorter->list.pList); } return pKey; } @@ -74935,7 +79591,7 @@ void *pKey; int nKey; /* Sorter key to copy into pOut */ pKey = vdbeSorterRowkey(pSorter, &nKey); - if( sqlite3VdbeMemGrow(pOut, nKey, 0) ){ + if( sqlite3VdbeMemClearAndResize(pOut, nKey) ){ return SQLITE_NOMEM; } pOut->n = nKey; @@ -74950,22 +79606,48 @@ ** passed as the first argument currently points to. For the purposes of ** the comparison, ignore the rowid field at the end of each record. ** +** If the sorter cursor key contains any NULL values, consider it to be +** less than pVal. Even if pVal also contains NULL values. +** ** If an error occurs, return an SQLite error code (i.e. SQLITE_NOMEM). ** Otherwise, set *pRes to a negative, zero or positive value if the ** key in pVal is smaller than, equal to or larger than the current sorter ** key. +** +** This routine forms the core of the OP_SorterCompare opcode, which in +** turn is used to verify uniqueness when constructing a UNIQUE INDEX. */ SQLITE_PRIVATE int sqlite3VdbeSorterCompare( const VdbeCursor *pCsr, /* Sorter cursor */ Mem *pVal, /* Value to compare to current sorter key */ - int nIgnore, /* Ignore this many fields at the end */ + int nKeyCol, /* Compare this many columns */ int *pRes /* OUT: Result of comparison */ ){ VdbeSorter *pSorter = pCsr->pSorter; + UnpackedRecord *r2 = pSorter->pUnpacked; + KeyInfo *pKeyInfo = pCsr->pKeyInfo; + int i; void *pKey; int nKey; /* Sorter key to compare pVal with */ + if( r2==0 ){ + char *p; + r2 = pSorter->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pKeyInfo,0,0,&p); + assert( pSorter->pUnpacked==(UnpackedRecord*)p ); + if( r2==0 ) return SQLITE_NOMEM; + r2->nField = nKeyCol; + } + assert( r2->nField==nKeyCol ); + pKey = vdbeSorterRowkey(pSorter, &nKey); - vdbeSorterCompare(pCsr, nIgnore, pVal->z, pVal->n, pKey, nKey, pRes); + sqlite3VdbeRecordUnpack(pKeyInfo, nKey, pKey, r2); + for(i=0; iaMem[i].flags & MEM_Null ){ + *pRes = -1; + return SQLITE_OK; + } + } + + *pRes = sqlite3VdbeRecordCompare(pVal->n, pVal->z, r2); return SQLITE_OK; } @@ -75256,7 +79938,7 @@ ** ** The size chosen is a little less than a power of two. That way, ** the FileChunk object will have a size that almost exactly fills -** a power-of-two allocation. This mimimizes wasted space in power-of-two +** a power-of-two allocation. This minimizes wasted space in power-of-two ** memory allocators. */ #define JOURNAL_CHUNKSIZE ((int)(1024-sizeof(FileChunk*))) @@ -75506,7 +80188,7 @@ /* ** Walk an expression tree. Invoke the callback once for each node -** of the expression, while decending. (In other words, the callback +** of the expression, while descending. (In other words, the callback ** is invoked before visiting children.) ** ** The return value from the callback should be one of the WRC_* @@ -75671,15 +80353,15 @@ ** is a helper function - a callback for the tree walker. */ static int incrAggDepth(Walker *pWalker, Expr *pExpr){ - if( pExpr->op==TK_AGG_FUNCTION ) pExpr->op2 += pWalker->u.i; + if( pExpr->op==TK_AGG_FUNCTION ) pExpr->op2 += pWalker->u.n; return WRC_Continue; } static void incrAggFunctionDepth(Expr *pExpr, int N){ if( N>0 ){ Walker w; memset(&w, 0, sizeof(w)); w.xExprCallback = incrAggDepth; - w.u.i = N; + w.u.n = N; sqlite3WalkExpr(&w, pExpr); } } @@ -75963,6 +80645,10 @@ if( pMatch ){ pExpr->iTable = pMatch->iCursor; pExpr->pTab = pMatch->pTab; + assert( (pMatch->jointype & JT_RIGHT)==0 ); /* RIGHT JOIN not (yet) supported */ + if( (pMatch->jointype & JT_LEFT)!=0 ){ + ExprSetProperty(pExpr, EP_CanBeNull); + } pSchema = pExpr->pTab->pSchema; } } /* if( pSrcList ) */ @@ -75997,7 +80683,7 @@ } } if( iCol>=pTab->nCol && sqlite3IsRowid(zCol) && HasRowid(pTab) ){ - /* IMP: R-24309-18625 */ + /* IMP: R-51414-32910 */ /* IMP: R-44911-55124 */ iCol = -1; } @@ -76227,7 +80913,7 @@ sqlite3AtoF(p->u.zToken, &r, sqlite3Strlen30(p->u.zToken), SQLITE_UTF8); assert( r>=0.0 ); if( r>1.0 ) return -1; - return (int)(r*1000.0); + return (int)(r*134217728.0); } /* @@ -76353,13 +81039,16 @@ /* EVIDENCE-OF: R-61304-29449 The unlikely(X) function is equivalent to ** likelihood(X, 0.0625). ** EVIDENCE-OF: R-01283-11636 The unlikely(X) function is short-hand for - ** likelihood(X,0.0625). */ - pExpr->iTable = 62; /* TUNING: Default 2nd arg to unlikely() is 0.0625 */ + ** likelihood(X,0.0625). + ** EVIDENCE-OF: R-36850-34127 The likely(X) function is short-hand for + ** likelihood(X,0.9375). + ** EVIDENCE-OF: R-53436-40973 The likely(X) function is equivalent to + ** likelihood(X,0.9375). */ + /* TUNING: unlikely() probability is 0.0625. likely() is 0.9375 */ + pExpr->iTable = pDef->zName[0]=='u' ? 8388608 : 125829120; } } - } #ifndef SQLITE_OMIT_AUTHORIZATION - if( pDef ){ auth = sqlite3AuthCheck(pParse, SQLITE_FUNCTION, 0, pDef->zName, 0); if( auth!=SQLITE_OK ){ if( auth==SQLITE_DENY ){ @@ -76370,9 +81059,9 @@ pExpr->op = TK_NULL; return WRC_Prune; } +#endif if( pDef->funcFlags & SQLITE_FUNC_CONSTANT ) ExprSetProperty(pExpr,EP_Constant); } -#endif if( is_agg && (pNC->ncFlags & NC_AllowAgg)==0 ){ sqlite3ErrorMsg(pParse, "misuse of aggregate function %.*s()", nId,zId); pNC->nErr++; @@ -76395,7 +81084,13 @@ pExpr->op2++; pNC2 = pNC2->pNext; } - if( pNC2 ) pNC2->ncFlags |= NC_HasAgg; + assert( pDef!=0 ); + if( pNC2 ){ + assert( SQLITE_FUNC_MINMAX==NC_MinMaxAgg ); + testcase( (pDef->funcFlags & SQLITE_FUNC_MINMAX)!=0 ); + pNC2->ncFlags |= NC_HasAgg | (pDef->funcFlags & SQLITE_FUNC_MINMAX); + + } pNC->ncFlags |= NC_AllowAgg; } /* FIX ME: Compute pExpr->affinity based on the expected return @@ -76756,7 +81451,7 @@ } /* -** Resolve names in the SELECT statement p and all of its descendents. +** Resolve names in the SELECT statement p and all of its descendants. */ static int resolveSelectStep(Walker *pWalker, Select *p){ NameContext *pOuterNC; /* Context that contains this SELECT */ @@ -76860,7 +81555,8 @@ assert( (p->selFlags & SF_Aggregate)==0 ); pGroupBy = p->pGroupBy; if( pGroupBy || (sNC.ncFlags & NC_HasAgg)!=0 ){ - p->selFlags |= SF_Aggregate; + assert( NC_MinMaxAgg==SF_MinMaxAgg ); + p->selFlags |= SF_Aggregate | (sNC.ncFlags&NC_MinMaxAgg); }else{ sNC.ncFlags &= ~NC_AllowAgg; } @@ -76988,7 +81684,7 @@ NameContext *pNC, /* Namespace to resolve expressions in. */ Expr *pExpr /* The expression to be analyzed. */ ){ - u8 savedHasAgg; + u16 savedHasAgg; Walker w; if( pExpr==0 ) return 0; @@ -77001,8 +81697,8 @@ pParse->nHeight += pExpr->nHeight; } #endif - savedHasAgg = pNC->ncFlags & NC_HasAgg; - pNC->ncFlags &= ~NC_HasAgg; + savedHasAgg = pNC->ncFlags & (NC_HasAgg|NC_MinMaxAgg); + pNC->ncFlags &= ~(NC_HasAgg|NC_MinMaxAgg); memset(&w, 0, sizeof(w)); w.xExprCallback = resolveExprStep; w.xSelectCallback = resolveSelectStep; @@ -77017,9 +81713,8 @@ } if( pNC->ncFlags & NC_HasAgg ){ ExprSetProperty(pExpr, EP_Agg); - }else if( savedHasAgg ){ - pNC->ncFlags |= NC_HasAgg; } + pNC->ncFlags |= savedHasAgg; return ExprHasProperty(pExpr, EP_Error); } @@ -77119,7 +81814,7 @@ ** affinity of that column is returned. Otherwise, 0x00 is returned, ** indicating no affinity for the expression. ** -** i.e. the WHERE clause expresssions in the following statements all +** i.e. the WHERE clause expressions in the following statements all ** have an affinity: ** ** CREATE TABLE t1(a); @@ -77130,6 +81825,7 @@ SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr){ int op; pExpr = sqlite3ExprSkipCollate(pExpr); + if( pExpr->flags & EP_Generic ) return 0; op = pExpr->op; if( op==TK_SELECT ){ assert( pExpr->flags&EP_xIsSelect ); @@ -77162,7 +81858,11 @@ ** If a memory allocation error occurs, that fact is recorded in pParse->db ** and the pExpr parameter is returned unchanged. */ -SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr *pExpr, Token *pCollName){ +SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken( + Parse *pParse, /* Parsing context */ + Expr *pExpr, /* Add the "COLLATE" clause to this expression */ + const Token *pCollName /* Name of collating sequence */ +){ if( pCollName->n>0 ){ Expr *pNew = sqlite3ExprAlloc(pParse->db, TK_COLLATE, pCollName, 1); if( pNew ){ @@ -77215,6 +81915,7 @@ Expr *p = pExpr; while( p ){ int op = p->op; + if( p->flags & EP_Generic ) break; if( op==TK_CAST || op==TK_UPLUS ){ p = p->pLeft; continue; @@ -77592,7 +82293,7 @@ } /* -** Allocate a Expr node which joins as many as two subtrees. +** Allocate an Expr node which joins as many as two subtrees. ** ** One or both of the subtrees can be NULL. Return a pointer to the new ** Expr node. Or, if an OOM error occurs, set pParse->db->mallocFailed, @@ -77606,7 +82307,7 @@ const Token *pToken /* Argument token */ ){ Expr *p; - if( op==TK_AND && pLeft && pRight ){ + if( op==TK_AND && pLeft && pRight && pParse->nErr==0 ){ /* Take advantage of short-circuit false optimization for AND */ p = sqlite3ExprAnd(pParse->db, pLeft, pRight); }else{ @@ -77702,7 +82403,7 @@ ** ** Wildcards of the form ":aaa", "@aaa", or "$aaa" are assigned the same number ** as the previous instance of the same wildcard. Or if this is the first -** instance of the wildcard, the next sequenial variable number is +** instance of the wildcard, the next sequential variable number is ** assigned. */ SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr){ @@ -77837,7 +82538,7 @@ ** During expression analysis, extra information is computed and moved into ** later parts of teh Expr object and that extra information might get chopped ** off if the expression is reduced. Note also that it does not work to -** make a EXPRDUP_REDUCE copy of a reduced expression. It is only legal +** make an EXPRDUP_REDUCE copy of a reduced expression. It is only legal ** to reduce a pristine expression tree from the parser. The implementation ** of dupedExprStructSize() contain multiple assert() statements that attempt ** to enforce this constraint. @@ -77906,7 +82607,7 @@ ** is not NULL then *pzBuffer is assumed to point to a buffer large enough ** to store the copy of expression p, the copies of p->u.zToken ** (if applicable), and the copies of the p->pLeft and p->pRight expressions, -** if any. Before returning, *pzBuffer is set to the first byte passed the +** if any. Before returning, *pzBuffer is set to the first byte past the ** portion of the buffer copied into by this function. */ static Expr *exprDup(sqlite3 *db, Expr *p, int flags, u8 **pzBuffer){ @@ -78046,7 +82747,6 @@ if( p==0 ) return 0; pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) ); if( pNew==0 ) return 0; - pNew->iECursor = 0; pNew->nExpr = i = p->nExpr; if( (flags & EXPRDUP_REDUCE)==0 ) for(i=1; inExpr; i+=i){} pNew->a = pItem = sqlite3DbMallocRaw(db, i*sizeof(p->a[0]) ); @@ -78159,9 +82859,9 @@ pNew->selFlags = p->selFlags & ~SF_UsesEphemeral; pNew->addrOpenEphm[0] = -1; pNew->addrOpenEphm[1] = -1; - pNew->addrOpenEphm[2] = -1; pNew->nSelectRow = p->nSelectRow; pNew->pWith = withDup(db, p->pWith); + sqlite3SelectSetName(pNew, p->zSelName); return pNew; } #else @@ -78302,37 +83002,51 @@ } /* -** These routines are Walker callbacks. Walker.u.pi is a pointer -** to an integer. These routines are checking an expression to see -** if it is a constant. Set *Walker.u.pi to 0 if the expression is -** not constant. +** These routines are Walker callbacks used to check expressions to +** see if they are "constant" for some definition of constant. The +** Walker.eCode value determines the type of "constant" we are looking +** for. ** ** These callback routines are used to implement the following: ** -** sqlite3ExprIsConstant() -** sqlite3ExprIsConstantNotJoin() -** sqlite3ExprIsConstantOrFunction() +** sqlite3ExprIsConstant() pWalker->eCode==1 +** sqlite3ExprIsConstantNotJoin() pWalker->eCode==2 +** sqlite3ExprRefOneTableOnly() pWalker->eCode==3 +** sqlite3ExprIsConstantOrFunction() pWalker->eCode==4 or 5 ** +** In all cases, the callbacks set Walker.eCode=0 and abort if the expression +** is found to not be a constant. +** +** The sqlite3ExprIsConstantOrFunction() is used for evaluating expressions +** in a CREATE TABLE statement. The Walker.eCode value is 5 when parsing +** an existing schema and 4 when processing a new statement. A bound +** parameter raises an error for new statements, but is silently converted +** to NULL for existing schemas. This allows sqlite_master tables that +** contain a bound parameter because they were generated by older versions +** of SQLite to be parsed by newer versions of SQLite without raising a +** malformed schema error. */ static int exprNodeIsConstant(Walker *pWalker, Expr *pExpr){ - /* If pWalker->u.i is 3 then any term of the expression that comes from - ** the ON or USING clauses of a join disqualifies the expression + /* If pWalker->eCode is 2 then any term of the expression that comes from + ** the ON or USING clauses of a left join disqualifies the expression ** from being considered constant. */ - if( pWalker->u.i==3 && ExprHasProperty(pExpr, EP_FromJoin) ){ - pWalker->u.i = 0; + if( pWalker->eCode==2 && ExprHasProperty(pExpr, EP_FromJoin) ){ + pWalker->eCode = 0; return WRC_Abort; } switch( pExpr->op ){ /* Consider functions to be constant if all their arguments are constant - ** and either pWalker->u.i==2 or the function as the SQLITE_FUNC_CONST - ** flag. */ + ** and either pWalker->eCode==4 or 5 or the function has the + ** SQLITE_FUNC_CONST flag. */ case TK_FUNCTION: - if( pWalker->u.i==2 || ExprHasProperty(pExpr,EP_Constant) ){ + if( pWalker->eCode>=4 || ExprHasProperty(pExpr,EP_Constant) ){ return WRC_Continue; + }else{ + pWalker->eCode = 0; + return WRC_Abort; } - /* Fall through */ case TK_ID: case TK_COLUMN: case TK_AGG_FUNCTION: @@ -78341,8 +83055,25 @@ testcase( pExpr->op==TK_COLUMN ); testcase( pExpr->op==TK_AGG_FUNCTION ); testcase( pExpr->op==TK_AGG_COLUMN ); - pWalker->u.i = 0; - return WRC_Abort; + if( pWalker->eCode==3 && pExpr->iTable==pWalker->u.iCur ){ + return WRC_Continue; + }else{ + pWalker->eCode = 0; + return WRC_Abort; + } + case TK_VARIABLE: + if( pWalker->eCode==5 ){ + /* Silently convert bound parameters that appear inside of CREATE + ** statements into a NULL when parsing the CREATE statement text out + ** of the sqlite_master table */ + pExpr->op = TK_NULL; + }else if( pWalker->eCode==4 ){ + /* A bound parameter in a CREATE statement that originates from + ** sqlite3_prepare() causes an error */ + pWalker->eCode = 0; + return WRC_Abort; + } + /* Fall through */ default: testcase( pExpr->op==TK_SELECT ); /* selectNodeIsConstant will disallow */ testcase( pExpr->op==TK_EXISTS ); /* selectNodeIsConstant will disallow */ @@ -78351,52 +83082,64 @@ } static int selectNodeIsConstant(Walker *pWalker, Select *NotUsed){ UNUSED_PARAMETER(NotUsed); - pWalker->u.i = 0; + pWalker->eCode = 0; return WRC_Abort; } -static int exprIsConst(Expr *p, int initFlag){ +static int exprIsConst(Expr *p, int initFlag, int iCur){ Walker w; memset(&w, 0, sizeof(w)); - w.u.i = initFlag; + w.eCode = initFlag; w.xExprCallback = exprNodeIsConstant; w.xSelectCallback = selectNodeIsConstant; + w.u.iCur = iCur; sqlite3WalkExpr(&w, p); - return w.u.i; + return w.eCode; } /* -** Walk an expression tree. Return 1 if the expression is constant +** Walk an expression tree. Return non-zero if the expression is constant ** and 0 if it involves variables or function calls. ** ** For the purposes of this function, a double-quoted string (ex: "abc") ** is considered a variable but a single-quoted string (ex: 'abc') is ** a constant. */ SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr *p){ - return exprIsConst(p, 1); + return exprIsConst(p, 1, 0); } /* -** Walk an expression tree. Return 1 if the expression is constant +** Walk an expression tree. Return non-zero if the expression is constant ** that does no originate from the ON or USING clauses of a join. ** Return 0 if it involves variables or function calls or terms from ** an ON or USING clause. */ SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr *p){ - return exprIsConst(p, 3); + return exprIsConst(p, 2, 0); } /* -** Walk an expression tree. Return 1 if the expression is constant +** Walk an expression tree. Return non-zero if the expression constant +** for any single row of the table with cursor iCur. In other words, the +** expression must not refer to any non-deterministic function nor any +** table other than iCur. +*/ +SQLITE_PRIVATE int sqlite3ExprIsTableConstant(Expr *p, int iCur){ + return exprIsConst(p, 3, iCur); +} + +/* +** Walk an expression tree. Return non-zero if the expression is constant ** or a function call with constant arguments. Return and 0 if there ** are any variables. ** ** For the purposes of this function, a double-quoted string (ex: "abc") ** is considered a variable but a single-quoted string (ex: 'abc') is ** a constant. */ -SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr *p){ - return exprIsConst(p, 2); +SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr *p, u8 isInit){ + assert( isInit==0 || isInit==1 ); + return exprIsConst(p, 4+isInit, 0); } /* @@ -78461,6 +83204,10 @@ case TK_FLOAT: case TK_BLOB: return 0; + case TK_COLUMN: + assert( p->pTab!=0 ); + return ExprHasProperty(p, EP_CanBeNull) || + (p->iColumn>=0 && p->pTab->aCol[p->iColumn].notNull==0); default: return 1; } @@ -78569,6 +83316,40 @@ } /* +** Generate code that checks the left-most column of index table iCur to see if +** it contains any NULL entries. Cause the register at regHasNull to be set +** to a non-NULL value if iCur contains no NULLs. Cause register regHasNull +** to be set to NULL if iCur contains one or more NULL values. +*/ +static void sqlite3SetHasNullFlag(Vdbe *v, int iCur, int regHasNull){ + int j1; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regHasNull); + j1 = sqlite3VdbeAddOp1(v, OP_Rewind, iCur); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Column, iCur, 0, regHasNull); + sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG); + VdbeComment((v, "first_entry_in(%d)", iCur)); + sqlite3VdbeJumpHere(v, j1); +} + + +#ifndef SQLITE_OMIT_SUBQUERY +/* +** The argument is an IN operator with a list (not a subquery) on the +** right-hand side. Return TRUE if that list is constant. +*/ +static int sqlite3InRhsIsConstant(Expr *pIn){ + Expr *pLHS; + int res; + assert( !ExprHasProperty(pIn, EP_xIsSelect) ); + pLHS = pIn->pLeft; + pIn->pLeft = 0; + res = sqlite3ExprIsConstant(pIn); + pIn->pLeft = pLHS; + return res; +} +#endif + +/* ** This function is used by the implementation of the IN (...) operator. ** The pX parameter is the expression on the RHS of the IN operator, which ** might be either a list of expressions or a subquery. @@ -78577,7 +83358,7 @@ ** be used either to test for membership in the RHS set or to iterate through ** all members of the RHS set, skipping duplicates. ** -** A cursor is opened on the b-tree object that the RHS of the IN operator +** A cursor is opened on the b-tree object that is the RHS of the IN operator ** and pX->iTable is set to the index of that cursor. ** ** The returned value of this function indicates the b-tree type, as follows: @@ -78587,6 +83368,8 @@ ** IN_INDEX_INDEX_DESC - The cursor was opened on a descending index. ** IN_INDEX_EPH - The cursor was opened on a specially created and ** populated epheremal table. +** IN_INDEX_NOOP - No cursor was allocated. The IN operator must be +** implemented as a sequence of comparisons. ** ** An existing b-tree might be used if the RHS expression pX is a simple ** subquery such as: @@ -78595,52 +83378,57 @@ ** ** If the RHS of the IN operator is a list or a more complex subquery, then ** an ephemeral table might need to be generated from the RHS and then -** pX->iTable made to point to the ephermeral table instead of an -** existing table. +** pX->iTable made to point to the ephemeral table instead of an +** existing table. ** -** If the prNotFound parameter is 0, then the b-tree will be used to iterate -** through the set members, skipping any duplicates. In this case an -** epheremal table must be used unless the selected is guaranteed +** The inFlags parameter must contain exactly one of the bits +** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP. If inFlags contains +** IN_INDEX_MEMBERSHIP, then the generated table will be used for a +** fast membership test. When the IN_INDEX_LOOP bit is set, the +** IN index will be used to loop over all values of the RHS of the +** IN operator. +** +** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate +** through the set members) then the b-tree must not contain duplicates. +** An epheremal table must be used unless the selected is guaranteed ** to be unique - either because it is an INTEGER PRIMARY KEY or it ** has a UNIQUE constraint or UNIQUE index. ** -** If the prNotFound parameter is not 0, then the b-tree will be used -** for fast set membership tests. In this case an epheremal table must +** When IN_INDEX_MEMBERSHIP is used (and the b-tree will be used +** for fast set membership tests) then an epheremal table must ** be used unless is an INTEGER PRIMARY KEY or an index can ** be found with as its left-most column. ** +** If the IN_INDEX_NOOP_OK and IN_INDEX_MEMBERSHIP are both set and +** if the RHS of the IN operator is a list (not a subquery) then this +** routine might decide that creating an ephemeral b-tree for membership +** testing is too expensive and return IN_INDEX_NOOP. In that case, the +** calling routine should implement the IN operator using a sequence +** of Eq or Ne comparison operations. +** ** When the b-tree is being used for membership tests, the calling function -** needs to know whether or not the structure contains an SQL NULL -** value in order to correctly evaluate expressions like "X IN (Y, Z)". -** If there is any chance that the (...) might contain a NULL value at +** might need to know whether or not the RHS side of the IN operator +** contains a NULL. If prRhsHasNull is not a NULL pointer and +** if there is any chance that the (...) might contain a NULL value at ** runtime, then a register is allocated and the register number written -** to *prNotFound. If there is no chance that the (...) contains a -** NULL value, then *prNotFound is left unchanged. +** to *prRhsHasNull. If there is no chance that the (...) contains a +** NULL value, then *prRhsHasNull is left unchanged. ** -** If a register is allocated and its location stored in *prNotFound, then -** its initial value is NULL. If the (...) does not remain constant -** for the duration of the query (i.e. the SELECT within the (...) -** is a correlated subquery) then the value of the allocated register is -** reset to NULL each time the subquery is rerun. This allows the -** caller to use vdbe code equivalent to the following: -** -** if( register==NULL ){ -** has_null = -** register = 1 -** } -** -** in order to avoid running the -** test more often than is necessary. +** If a register is allocated and its location stored in *prRhsHasNull, then +** the value in that register will be NULL if the b-tree contains one or more +** NULL values, and it will be some non-NULL value if the b-tree contains no +** NULL values. */ #ifndef SQLITE_OMIT_SUBQUERY -SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, int *prNotFound){ +SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, u32 inFlags, int *prRhsHasNull){ Select *p; /* SELECT to the right of IN operator */ int eType = 0; /* Type of RHS table. IN_INDEX_* */ int iTab = pParse->nTab++; /* Cursor of the RHS table */ - int mustBeUnique = (prNotFound==0); /* True if RHS must be unique */ + int mustBeUnique; /* True if RHS must be unique */ Vdbe *v = sqlite3GetVdbe(pParse); /* Virtual machine being coded */ assert( pX->op==TK_IN ); + mustBeUnique = (inFlags & IN_INDEX_LOOP)!=0; /* Check to see if an existing table or index can be used to ** satisfy the query. This is preferable to generating a new @@ -78697,7 +83485,7 @@ for(pIdx=pTab->pIndex; pIdx && eType==0 && affinity_ok; pIdx=pIdx->pNext){ if( (pIdx->aiColumn[0]==iCol) && sqlite3FindCollSeq(db, ENC(db), pIdx->azColl[0], 0)==pReq - && (!mustBeUnique || (pIdx->nKeyCol==1 && pIdx->onError!=OE_None)) + && (!mustBeUnique || (pIdx->nKeyCol==1 && IsUniqueIndex(pIdx))) ){ int iAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v); sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb); @@ -78706,32 +83494,46 @@ assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 ); eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0]; - if( prNotFound && !pTab->aCol[iCol].notNull ){ - *prNotFound = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Null, 0, *prNotFound); + if( prRhsHasNull && !pTab->aCol[iCol].notNull ){ + *prRhsHasNull = ++pParse->nMem; + sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull); } sqlite3VdbeJumpHere(v, iAddr); } } } } + /* If no preexisting index is available for the IN clause + ** and IN_INDEX_NOOP is an allowed reply + ** and the RHS of the IN operator is a list, not a subquery + ** and the RHS is not contant or has two or fewer terms, + ** then it is not worth creating an ephemeral table to evaluate + ** the IN operator so return IN_INDEX_NOOP. + */ + if( eType==0 + && (inFlags & IN_INDEX_NOOP_OK) + && !ExprHasProperty(pX, EP_xIsSelect) + && (!sqlite3InRhsIsConstant(pX) || pX->x.pList->nExpr<=2) + ){ + eType = IN_INDEX_NOOP; + } + + if( eType==0 ){ - /* Could not found an existing table or index to use as the RHS b-tree. + /* Could not find an existing table or index to use as the RHS b-tree. ** We will have to generate an ephemeral table to do the job. */ u32 savedNQueryLoop = pParse->nQueryLoop; int rMayHaveNull = 0; eType = IN_INDEX_EPH; - if( prNotFound ){ - *prNotFound = rMayHaveNull = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Null, 0, *prNotFound); - }else{ - testcase( pParse->nQueryLoop>0 ); + if( inFlags & IN_INDEX_LOOP ){ pParse->nQueryLoop = 0; if( pX->pLeft->iColumn<0 && !ExprHasProperty(pX, EP_xIsSelect) ){ eType = IN_INDEX_ROWID; } + }else if( prRhsHasNull ){ + *prRhsHasNull = rMayHaveNull = ++pParse->nMem; } sqlite3CodeSubselect(pParse, pX, rMayHaveNull, eType==IN_INDEX_ROWID); pParse->nQueryLoop = savedNQueryLoop; @@ -78762,27 +83564,21 @@ ** ** If rMayHaveNull is non-zero, that means that the operation is an IN ** (not a SELECT or EXISTS) and that the RHS might contains NULLs. -** Furthermore, the IN is in a WHERE clause and that we really want -** to iterate over the RHS of the IN operator in order to quickly locate -** all corresponding LHS elements. All this routine does is initialize -** the register given by rMayHaveNull to NULL. Calling routines will take -** care of changing this register value to non-NULL if the RHS is NULL-free. +** All this routine does is initialize the register given by rMayHaveNull +** to NULL. Calling routines will take care of changing this register +** value to non-NULL if the RHS is NULL-free. ** -** If rMayHaveNull is zero, that means that the subquery is being used -** for membership testing only. There is no need to initialize any -** registers to indicate the presence or absence of NULLs on the RHS. -** ** For a SELECT or EXISTS operator, return the register that holds the ** result. For IN operators or if an error occurs, the return value is 0. */ #ifndef SQLITE_OMIT_SUBQUERY SQLITE_PRIVATE int sqlite3CodeSubselect( Parse *pParse, /* Parsing context */ Expr *pExpr, /* The IN, SELECT, or EXISTS operator */ - int rMayHaveNull, /* Register that records whether NULLs exist in RHS */ + int rHasNullFlag, /* Register that records whether NULLs exist in RHS */ int isRowid /* If true, LHS of IN operator is a rowid */ ){ - int testAddr = -1; /* One-time test address */ + int jmpIfDynamic = -1; /* One-time test address */ int rReg = 0; /* Register storing resulting */ Vdbe *v = sqlite3GetVdbe(pParse); if( NEVER(v==0) ) return 0; @@ -78799,13 +83595,13 @@ ** save the results, and reuse the same result on subsequent invocations. */ if( !ExprHasProperty(pExpr, EP_VarSelect) ){ - testAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v); + jmpIfDynamic = sqlite3CodeOnce(pParse); VdbeCoverage(v); } #ifndef SQLITE_OMIT_EXPLAIN if( pParse->explain==2 ){ char *zMsg = sqlite3MPrintf( - pParse->db, "EXECUTE %s%s SUBQUERY %d", testAddr>=0?"":"CORRELATED ", + pParse->db, "EXECUTE %s%s SUBQUERY %d", jmpIfDynamic>=0?"":"CORRELATED ", pExpr->op==TK_IN?"LIST":"SCALAR", pParse->iNextSelectId ); sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); @@ -78819,10 +83615,6 @@ Expr *pLeft = pExpr->pLeft; /* the LHS of the IN operator */ KeyInfo *pKeyInfo = 0; /* Key information */ - if( rMayHaveNull ){ - sqlite3VdbeAddOp2(v, OP_Null, 0, rMayHaveNull); - } - affinity = sqlite3ExprAffinity(pLeft); /* Whether this is an 'x IN(SELECT...)' or an 'x IN()' @@ -78848,20 +83640,22 @@ ** Generate code to write the results of the select into the temporary ** table allocated and opened above. */ + Select *pSelect = pExpr->x.pSelect; SelectDest dest; ExprList *pEList; assert( !isRowid ); sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable); dest.affSdst = (u8)affinity; assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable ); - pExpr->x.pSelect->iLimit = 0; + pSelect->iLimit = 0; + testcase( pSelect->selFlags & SF_Distinct ); testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */ - if( sqlite3Select(pParse, pExpr->x.pSelect, &dest) ){ + if( sqlite3Select(pParse, pSelect, &dest) ){ sqlite3KeyInfoUnref(pKeyInfo); return 0; } - pEList = pExpr->x.pSelect->pEList; + pEList = pSelect->pEList; assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */ assert( pEList!=0 ); assert( pEList->nExpr>0 ); @@ -78892,7 +83686,7 @@ /* Loop through each expression in . */ r1 = sqlite3GetTempReg(pParse); r2 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp2(v, OP_Null, 0, r2); + if( isRowid ) sqlite3VdbeAddOp2(v, OP_Null, 0, r2); for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){ Expr *pE2 = pItem->pExpr; int iValToIns; @@ -78902,9 +83696,9 @@ ** this code only executes once. Because for a non-constant ** expression we need to rerun this code each time. */ - if( testAddr>=0 && !sqlite3ExprIsConstant(pE2) ){ - sqlite3VdbeChangeToNoop(v, testAddr); - testAddr = -1; + if( jmpIfDynamic>=0 && !sqlite3ExprIsConstant(pE2) ){ + sqlite3VdbeChangeToNoop(v, jmpIfDynamic); + jmpIfDynamic = -1; } /* Evaluate the expression and insert it into the temp table */ @@ -78954,6 +83748,7 @@ sqlite3SelectDestInit(&dest, 0, ++pParse->nMem); if( pExpr->op==TK_SELECT ){ dest.eDest = SRT_Mem; + dest.iSdst = dest.iSDParm; sqlite3VdbeAddOp2(v, OP_Null, 0, dest.iSDParm); VdbeComment((v, "Init subquery result")); }else{ @@ -78974,11 +83769,15 @@ } } - if( testAddr>=0 ){ - sqlite3VdbeJumpHere(v, testAddr); + if( rHasNullFlag ){ + sqlite3SetHasNullFlag(v, pExpr->iTable, rHasNullFlag); } - sqlite3ExprCachePop(pParse, 1); + if( jmpIfDynamic>=0 ){ + sqlite3VdbeJumpHere(v, jmpIfDynamic); + } + sqlite3ExprCachePop(pParse); + return rReg; } #endif /* SQLITE_OMIT_SUBQUERY */ @@ -78996,7 +83795,7 @@ ** if the LHS is NULL or if the LHS is not contained within the RHS and the ** RHS contains one or more NULL values. ** -** This routine generates code will jump to destIfFalse if the LHS is not +** This routine generates code that jumps to destIfFalse if the LHS is not ** contained within the RHS. If due to NULLs we cannot determine if the LHS ** is contained in the RHS then jump to destIfNull. If the LHS is contained ** within the RHS then fall through. @@ -79019,7 +83818,9 @@ v = pParse->pVdbe; assert( v!=0 ); /* OOM detected prior to this routine */ VdbeNoopComment((v, "begin IN expr")); - eType = sqlite3FindInIndex(pParse, pExpr, &rRhsHasNull); + eType = sqlite3FindInIndex(pParse, pExpr, + IN_INDEX_MEMBERSHIP | IN_INDEX_NOOP_OK, + destIfFalse==destIfNull ? 0 : &rRhsHasNull); /* Figure out the affinity to use to create a key from the results ** of the expression. affinityStr stores a static string suitable for @@ -79033,86 +83834,118 @@ r1 = sqlite3GetTempReg(pParse); sqlite3ExprCode(pParse, pExpr->pLeft, r1); - /* If the LHS is NULL, then the result is either false or NULL depending - ** on whether the RHS is empty or not, respectively. + /* If sqlite3FindInIndex() did not find or create an index that is + ** suitable for evaluating the IN operator, then evaluate using a + ** sequence of comparisons. */ - if( destIfNull==destIfFalse ){ - /* Shortcut for the common case where the false and NULL outcomes are - ** the same. */ - sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v); + if( eType==IN_INDEX_NOOP ){ + ExprList *pList = pExpr->x.pList; + CollSeq *pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft); + int labelOk = sqlite3VdbeMakeLabel(v); + int r2, regToFree; + int regCkNull = 0; + int ii; + assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); + if( destIfNull!=destIfFalse ){ + regCkNull = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_BitAnd, r1, r1, regCkNull); + } + for(ii=0; iinExpr; ii++){ + r2 = sqlite3ExprCodeTemp(pParse, pList->a[ii].pExpr, ®ToFree); + if( regCkNull && sqlite3ExprCanBeNull(pList->a[ii].pExpr) ){ + sqlite3VdbeAddOp3(v, OP_BitAnd, regCkNull, r2, regCkNull); + } + if( iinExpr-1 || destIfNull!=destIfFalse ){ + sqlite3VdbeAddOp4(v, OP_Eq, r1, labelOk, r2, + (void*)pColl, P4_COLLSEQ); + VdbeCoverageIf(v, iinExpr-1); + VdbeCoverageIf(v, ii==pList->nExpr-1); + sqlite3VdbeChangeP5(v, affinity); + }else{ + assert( destIfNull==destIfFalse ); + sqlite3VdbeAddOp4(v, OP_Ne, r1, destIfFalse, r2, + (void*)pColl, P4_COLLSEQ); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, affinity | SQLITE_JUMPIFNULL); + } + sqlite3ReleaseTempReg(pParse, regToFree); + } + if( regCkNull ){ + sqlite3VdbeAddOp2(v, OP_IsNull, regCkNull, destIfNull); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse); + } + sqlite3VdbeResolveLabel(v, labelOk); + sqlite3ReleaseTempReg(pParse, regCkNull); }else{ - int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse); - VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull); - sqlite3VdbeJumpHere(v, addr1); - } - - if( eType==IN_INDEX_ROWID ){ - /* In this case, the RHS is the ROWID of table b-tree + + /* If the LHS is NULL, then the result is either false or NULL depending + ** on whether the RHS is empty or not, respectively. */ - sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); VdbeCoverage(v); - sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1); - VdbeCoverage(v); - }else{ - /* In this case, the RHS is an index b-tree. - */ - sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1); - - /* If the set membership test fails, then the result of the - ** "x IN (...)" expression must be either 0 or NULL. If the set - ** contains no NULL values, then the result is 0. If the set - ** contains one or more NULL values, then the result of the - ** expression is also NULL. - */ - if( rRhsHasNull==0 || destIfFalse==destIfNull ){ - /* This branch runs if it is known at compile time that the RHS - ** cannot contain NULL values. This happens as the result - ** of a "NOT NULL" constraint in the database schema. - ** - ** Also run this branch if NULL is equivalent to FALSE - ** for this particular IN operator. + if( sqlite3ExprCanBeNull(pExpr->pLeft) ){ + if( destIfNull==destIfFalse ){ + /* Shortcut for the common case where the false and NULL outcomes are + ** the same. */ + sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v); + }else{ + int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull); + sqlite3VdbeJumpHere(v, addr1); + } + } + + if( eType==IN_INDEX_ROWID ){ + /* In this case, the RHS is the ROWID of table b-tree */ - sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1); + sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1); VdbeCoverage(v); }else{ - /* In this branch, the RHS of the IN might contain a NULL and - ** the presence of a NULL on the RHS makes a difference in the - ** outcome. + /* In this case, the RHS is an index b-tree. */ - int j1, j2; - - /* First check to see if the LHS is contained in the RHS. If so, - ** then the presence of NULLs in the RHS does not matter, so jump - ** over all of the code that follows. + sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1); + + /* If the set membership test fails, then the result of the + ** "x IN (...)" expression must be either 0 or NULL. If the set + ** contains no NULL values, then the result is 0. If the set + ** contains one or more NULL values, then the result of the + ** expression is also NULL. */ - j1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1); - VdbeCoverage(v); - - /* Here we begin generating code that runs if the LHS is not - ** contained within the RHS. Generate additional code that - ** tests the RHS for NULLs. If the RHS contains a NULL then - ** jump to destIfNull. If there are no NULLs in the RHS then - ** jump to destIfFalse. - */ - sqlite3VdbeAddOp2(v, OP_If, rRhsHasNull, destIfNull); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_IfNot, rRhsHasNull, destIfFalse); VdbeCoverage(v); - j2 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, rRhsHasNull, 1); - VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Integer, 0, rRhsHasNull); - sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse); - sqlite3VdbeJumpHere(v, j2); - sqlite3VdbeAddOp2(v, OP_Integer, 1, rRhsHasNull); - sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull); - - /* The OP_Found at the top of this branch jumps here when true, - ** causing the overall IN expression evaluation to fall through. - */ - sqlite3VdbeJumpHere(v, j1); + assert( destIfFalse!=destIfNull || rRhsHasNull==0 ); + if( rRhsHasNull==0 ){ + /* This branch runs if it is known at compile time that the RHS + ** cannot contain NULL values. This happens as the result + ** of a "NOT NULL" constraint in the database schema. + ** + ** Also run this branch if NULL is equivalent to FALSE + ** for this particular IN operator. + */ + sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1); + VdbeCoverage(v); + }else{ + /* In this branch, the RHS of the IN might contain a NULL and + ** the presence of a NULL on the RHS makes a difference in the + ** outcome. + */ + int j1; + + /* First check to see if the LHS is contained in the RHS. If so, + ** then the answer is TRUE the presence of NULLs in the RHS does + ** not matter. If the LHS is not contained in the RHS, then the + ** answer is NULL if the RHS contains NULLs and the answer is + ** FALSE if the RHS is NULL-free. + */ + j1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_IsNull, rRhsHasNull, destIfNull); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse); + sqlite3VdbeJumpHere(v, j1); + } } } sqlite3ReleaseTempReg(pParse, r1); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); VdbeComment((v, "end IN expr")); } #endif /* SQLITE_OMIT_SUBQUERY */ @@ -79169,7 +84002,7 @@ i64 value; const char *z = pExpr->u.zToken; assert( z!=0 ); - c = sqlite3Atoi64(z, &value, sqlite3Strlen30(z), SQLITE_UTF8); + c = sqlite3DecOrHexToI64(z, &value); if( c==0 || (c==2 && negFlag) ){ char *zV; if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } @@ -79179,8 +84012,15 @@ #ifdef SQLITE_OMIT_FLOATING_POINT sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z); #else - codeReal(v, z, negFlag, iMem); +#ifndef SQLITE_OMIT_HEX_INTEGER + if( sqlite3_strnicmp(z,"0x",2)==0 ){ + sqlite3ErrorMsg(pParse, "hex literal too big: %s", z); + }else #endif + { + codeReal(v, z, negFlag, iMem); + } +#endif } } } @@ -79295,15 +84135,14 @@ /* ** Remove from the column cache any entries that were added since the -** the previous N Push operations. In other words, restore the cache -** to the state it was in N Pushes ago. +** the previous sqlite3ExprCachePush operation. In other words, restore +** the cache to the state it was in prior the most recent Push. */ -SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse, int N){ +SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse){ int i; struct yColCache *p; - assert( N>0 ); - assert( pParse->iCacheLevel>=N ); - pParse->iCacheLevel -= N; + assert( pParse->iCacheLevel>=1 ); + pParse->iCacheLevel--; #ifdef SQLITE_DEBUG if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ printf("POP to %d\n", pParse->iCacheLevel); @@ -79429,16 +84268,9 @@ ** over to iTo..iTo+nReg-1. Keep the column cache up-to-date. */ SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse *pParse, int iFrom, int iTo, int nReg){ - int i; - struct yColCache *p; assert( iFrom>=iTo+nReg || iFrom+nReg<=iTo ); - sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg-1); - for(i=0, p=pParse->aColCache; iiReg; - if( x>=iFrom && xiReg += iTo-iFrom; - } - } + sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg); + sqlite3ExprCacheRemove(pParse, iFrom, nReg); } #if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST) @@ -79593,26 +84425,13 @@ #ifndef SQLITE_OMIT_CAST case TK_CAST: { /* Expressions of the form: CAST(pLeft AS token) */ - int aff, to_op; inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); - assert( !ExprHasProperty(pExpr, EP_IntValue) ); - aff = sqlite3AffinityType(pExpr->u.zToken, 0); - to_op = aff - SQLITE_AFF_TEXT + OP_ToText; - assert( to_op==OP_ToText || aff!=SQLITE_AFF_TEXT ); - assert( to_op==OP_ToBlob || aff!=SQLITE_AFF_NONE ); - assert( to_op==OP_ToNumeric || aff!=SQLITE_AFF_NUMERIC ); - assert( to_op==OP_ToInt || aff!=SQLITE_AFF_INTEGER ); - assert( to_op==OP_ToReal || aff!=SQLITE_AFF_REAL ); - testcase( to_op==OP_ToText ); - testcase( to_op==OP_ToBlob ); - testcase( to_op==OP_ToNumeric ); - testcase( to_op==OP_ToInt ); - testcase( to_op==OP_ToReal ); if( inReg!=target ){ sqlite3VdbeAddOp2(v, OP_SCopy, inReg, target); inReg = target; } - sqlite3VdbeAddOp1(v, to_op, inReg); + sqlite3VdbeAddOp2(v, OP_Cast, target, + sqlite3AffinityType(pExpr->u.zToken, 0)); testcase( usedAsColumnCache(pParse, inReg, inReg) ); sqlite3ExprCacheAffinityChange(pParse, inReg, 1); break; @@ -79726,7 +84545,7 @@ addr = sqlite3VdbeAddOp1(v, op, r1); VdbeCoverageIf(v, op==TK_ISNULL); VdbeCoverageIf(v, op==TK_NOTNULL); - sqlite3VdbeAddOp2(v, OP_AddImm, target, -1); + sqlite3VdbeAddOp2(v, OP_Integer, 0, target); sqlite3VdbeJumpHere(v, addr); break; } @@ -79762,13 +84581,13 @@ zId = pExpr->u.zToken; nId = sqlite3Strlen30(zId); pDef = sqlite3FindFunction(db, zId, nId, nFarg, enc, 0); - if( pDef==0 ){ + if( pDef==0 || pDef->xFunc==0 ){ sqlite3ErrorMsg(pParse, "unknown function: %.*s()", nId, zId); break; } /* Attempt a direct implementation of the built-in COALESCE() and - ** IFNULL() functions. This avoids unnecessary evalation of + ** IFNULL() functions. This avoids unnecessary evaluation of ** arguments past the first non-NULL argument. */ if( pDef->funcFlags & SQLITE_FUNC_COALESCE ){ @@ -79781,7 +84600,7 @@ sqlite3ExprCacheRemove(pParse, target, 1); sqlite3ExprCachePush(pParse); sqlite3ExprCode(pParse, pFarg->a[i].pExpr, target); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); } sqlite3VdbeResolveLabel(v, endCoalesce); break; @@ -79833,9 +84652,9 @@ } sqlite3ExprCachePush(pParse); /* Ticket 2ea2425d34be */ - sqlite3ExprCodeExprList(pParse, pFarg, r1, + sqlite3ExprCodeExprList(pParse, pFarg, r1, SQLITE_ECEL_DUP|SQLITE_ECEL_FACTOR); - sqlite3ExprCachePop(pParse, 1); /* Ticket 2ea2425d34be */ + sqlite3ExprCachePop(pParse); /* Ticket 2ea2425d34be */ }else{ r1 = 0; } @@ -79977,7 +84796,10 @@ #ifndef SQLITE_OMIT_FLOATING_POINT /* If the column has REAL affinity, it may currently be stored as an - ** integer. Use OP_RealAffinity to make sure it is really real. */ + ** integer. Use OP_RealAffinity to make sure it is really real. + ** + ** EVIDENCE-OF: R-60985-57662 SQLite will convert the value back to + ** floating point when extracting it from the record. */ if( pExpr->iColumn>=0 && pTab->aCol[pExpr->iColumn].affinity==SQLITE_AFF_REAL ){ @@ -80055,13 +84877,13 @@ testcase( aListelem[i+1].pExpr->op==TK_COLUMN ); sqlite3ExprCode(pParse, aListelem[i+1].pExpr, target); sqlite3VdbeAddOp2(v, OP_Goto, 0, endLabel); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); sqlite3VdbeResolveLabel(v, nextCase); } if( (nExpr&1)!=0 ){ sqlite3ExprCachePush(pParse); sqlite3ExprCode(pParse, pEList->a[nExpr-1].pExpr, target); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); }else{ sqlite3VdbeAddOp2(v, OP_Null, 0, target); } @@ -80207,7 +85029,7 @@ } /* -** Generate code that evalutes the given expression and puts the result +** Generate code that evaluates the given expression and puts the result ** in register target. ** ** Also make a copy of the expression results into another "cache" register @@ -80230,90 +85052,86 @@ exprToRegister(pExpr, iMem); } -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) +#ifdef SQLITE_DEBUG /* ** Generate a human-readable explanation of an expression tree. */ -SQLITE_PRIVATE void sqlite3ExplainExpr(Vdbe *pOut, Expr *pExpr){ - int op; /* The opcode being coded */ +SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){ const char *zBinOp = 0; /* Binary operator */ const char *zUniOp = 0; /* Unary operator */ + pView = sqlite3TreeViewPush(pView, moreToFollow); if( pExpr==0 ){ - op = TK_NULL; - }else{ - op = pExpr->op; + sqlite3TreeViewLine(pView, "nil"); + sqlite3TreeViewPop(pView); + return; } - switch( op ){ + switch( pExpr->op ){ case TK_AGG_COLUMN: { - sqlite3ExplainPrintf(pOut, "AGG{%d:%d}", + sqlite3TreeViewLine(pView, "AGG{%d:%d}", pExpr->iTable, pExpr->iColumn); break; } case TK_COLUMN: { if( pExpr->iTable<0 ){ /* This only happens when coding check constraints */ - sqlite3ExplainPrintf(pOut, "COLUMN(%d)", pExpr->iColumn); + sqlite3TreeViewLine(pView, "COLUMN(%d)", pExpr->iColumn); }else{ - sqlite3ExplainPrintf(pOut, "{%d:%d}", + sqlite3TreeViewLine(pView, "{%d:%d}", pExpr->iTable, pExpr->iColumn); } break; } case TK_INTEGER: { if( pExpr->flags & EP_IntValue ){ - sqlite3ExplainPrintf(pOut, "%d", pExpr->u.iValue); + sqlite3TreeViewLine(pView, "%d", pExpr->u.iValue); }else{ - sqlite3ExplainPrintf(pOut, "%s", pExpr->u.zToken); + sqlite3TreeViewLine(pView, "%s", pExpr->u.zToken); } break; } #ifndef SQLITE_OMIT_FLOATING_POINT case TK_FLOAT: { - sqlite3ExplainPrintf(pOut,"%s", pExpr->u.zToken); + sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken); break; } #endif case TK_STRING: { - sqlite3ExplainPrintf(pOut,"%Q", pExpr->u.zToken); + sqlite3TreeViewLine(pView,"%Q", pExpr->u.zToken); break; } case TK_NULL: { - sqlite3ExplainPrintf(pOut,"NULL"); + sqlite3TreeViewLine(pView,"NULL"); break; } #ifndef SQLITE_OMIT_BLOB_LITERAL case TK_BLOB: { - sqlite3ExplainPrintf(pOut,"%s", pExpr->u.zToken); + sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken); break; } #endif case TK_VARIABLE: { - sqlite3ExplainPrintf(pOut,"VARIABLE(%s,%d)", - pExpr->u.zToken, pExpr->iColumn); + sqlite3TreeViewLine(pView,"VARIABLE(%s,%d)", + pExpr->u.zToken, pExpr->iColumn); break; } case TK_REGISTER: { - sqlite3ExplainPrintf(pOut,"REGISTER(%d)", pExpr->iTable); + sqlite3TreeViewLine(pView,"REGISTER(%d)", pExpr->iTable); break; } case TK_AS: { - sqlite3ExplainExpr(pOut, pExpr->pLeft); + sqlite3TreeViewLine(pView,"AS %Q", pExpr->u.zToken); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); break; } + case TK_ID: { + sqlite3TreeViewLine(pView,"ID %Q", pExpr->u.zToken); + break; + } #ifndef SQLITE_OMIT_CAST case TK_CAST: { /* Expressions of the form: CAST(pLeft AS token) */ - const char *zAff = "unk"; - switch( sqlite3AffinityType(pExpr->u.zToken, 0) ){ - case SQLITE_AFF_TEXT: zAff = "TEXT"; break; - case SQLITE_AFF_NONE: zAff = "NONE"; break; - case SQLITE_AFF_NUMERIC: zAff = "NUMERIC"; break; - case SQLITE_AFF_INTEGER: zAff = "INTEGER"; break; - case SQLITE_AFF_REAL: zAff = "REAL"; break; - } - sqlite3ExplainPrintf(pOut, "CAST-%s(", zAff); - sqlite3ExplainExpr(pOut, pExpr->pLeft); - sqlite3ExplainPrintf(pOut, ")"); + sqlite3TreeViewLine(pView,"CAST %Q", pExpr->u.zToken); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); break; } #endif /* SQLITE_OMIT_CAST */ @@ -80337,6 +85155,7 @@ case TK_LSHIFT: zBinOp = "LSHIFT"; break; case TK_RSHIFT: zBinOp = "RSHIFT"; break; case TK_CONCAT: zBinOp = "CONCAT"; break; + case TK_DOT: zBinOp = "DOT"; break; case TK_UMINUS: zUniOp = "UMINUS"; break; case TK_UPLUS: zUniOp = "UPLUS"; break; @@ -80346,8 +85165,8 @@ case TK_NOTNULL: zUniOp = "NOTNULL"; break; case TK_COLLATE: { - sqlite3ExplainExpr(pOut, pExpr->pLeft); - sqlite3ExplainPrintf(pOut,".COLLATE(%s)",pExpr->u.zToken); + sqlite3TreeViewLine(pView, "COLLATE %Q", pExpr->u.zToken); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); break; } @@ -80359,41 +85178,36 @@ }else{ pFarg = pExpr->x.pList; } - if( op==TK_AGG_FUNCTION ){ - sqlite3ExplainPrintf(pOut, "AGG_FUNCTION%d:%s(", + if( pExpr->op==TK_AGG_FUNCTION ){ + sqlite3TreeViewLine(pView, "AGG_FUNCTION%d %Q", pExpr->op2, pExpr->u.zToken); }else{ - sqlite3ExplainPrintf(pOut, "FUNCTION:%s(", pExpr->u.zToken); + sqlite3TreeViewLine(pView, "FUNCTION %Q", pExpr->u.zToken); } if( pFarg ){ - sqlite3ExplainExprList(pOut, pFarg); + sqlite3TreeViewExprList(pView, pFarg, 0, 0); } - sqlite3ExplainPrintf(pOut, ")"); break; } #ifndef SQLITE_OMIT_SUBQUERY case TK_EXISTS: { - sqlite3ExplainPrintf(pOut, "EXISTS("); - sqlite3ExplainSelect(pOut, pExpr->x.pSelect); - sqlite3ExplainPrintf(pOut,")"); + sqlite3TreeViewLine(pView, "EXISTS-expr"); + sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); break; } case TK_SELECT: { - sqlite3ExplainPrintf(pOut, "("); - sqlite3ExplainSelect(pOut, pExpr->x.pSelect); - sqlite3ExplainPrintf(pOut, ")"); + sqlite3TreeViewLine(pView, "SELECT-expr"); + sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); break; } case TK_IN: { - sqlite3ExplainPrintf(pOut, "IN("); - sqlite3ExplainExpr(pOut, pExpr->pLeft); - sqlite3ExplainPrintf(pOut, ","); + sqlite3TreeViewLine(pView, "IN"); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - sqlite3ExplainSelect(pOut, pExpr->x.pSelect); + sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); }else{ - sqlite3ExplainExprList(pOut, pExpr->x.pList); + sqlite3TreeViewExprList(pView, pExpr->x.pList, 0, 0); } - sqlite3ExplainPrintf(pOut, ")"); break; } #endif /* SQLITE_OMIT_SUBQUERY */ @@ -80413,13 +85227,10 @@ Expr *pX = pExpr->pLeft; Expr *pY = pExpr->x.pList->a[0].pExpr; Expr *pZ = pExpr->x.pList->a[1].pExpr; - sqlite3ExplainPrintf(pOut, "BETWEEN("); - sqlite3ExplainExpr(pOut, pX); - sqlite3ExplainPrintf(pOut, ","); - sqlite3ExplainExpr(pOut, pY); - sqlite3ExplainPrintf(pOut, ","); - sqlite3ExplainExpr(pOut, pZ); - sqlite3ExplainPrintf(pOut, ")"); + sqlite3TreeViewLine(pView, "BETWEEN"); + sqlite3TreeViewExpr(pView, pX, 1); + sqlite3TreeViewExpr(pView, pY, 1); + sqlite3TreeViewExpr(pView, pZ, 0); break; } case TK_TRIGGER: { @@ -80430,15 +85241,14 @@ ** is set to the column of the pseudo-table to read, or to -1 to ** read the rowid field. */ - sqlite3ExplainPrintf(pOut, "%s(%d)", + sqlite3TreeViewLine(pView, "%s(%d)", pExpr->iTable ? "NEW" : "OLD", pExpr->iColumn); break; } case TK_CASE: { - sqlite3ExplainPrintf(pOut, "CASE("); - sqlite3ExplainExpr(pOut, pExpr->pLeft); - sqlite3ExplainPrintf(pOut, ","); - sqlite3ExplainExprList(pOut, pExpr->x.pList); + sqlite3TreeViewLine(pView, "CASE"); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); + sqlite3TreeViewExprList(pView, pExpr->x.pList, 0, 0); break; } #ifndef SQLITE_OMIT_TRIGGER @@ -80450,55 +85260,57 @@ case OE_Fail: zType = "fail"; break; case OE_Ignore: zType = "ignore"; break; } - sqlite3ExplainPrintf(pOut, "RAISE-%s(%s)", zType, pExpr->u.zToken); + sqlite3TreeViewLine(pView, "RAISE %s(%Q)", zType, pExpr->u.zToken); break; } #endif + default: { + sqlite3TreeViewLine(pView, "op=%d", pExpr->op); + break; + } } if( zBinOp ){ - sqlite3ExplainPrintf(pOut,"%s(", zBinOp); - sqlite3ExplainExpr(pOut, pExpr->pLeft); - sqlite3ExplainPrintf(pOut,","); - sqlite3ExplainExpr(pOut, pExpr->pRight); - sqlite3ExplainPrintf(pOut,")"); + sqlite3TreeViewLine(pView, "%s", zBinOp); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); + sqlite3TreeViewExpr(pView, pExpr->pRight, 0); }else if( zUniOp ){ - sqlite3ExplainPrintf(pOut,"%s(", zUniOp); - sqlite3ExplainExpr(pOut, pExpr->pLeft); - sqlite3ExplainPrintf(pOut,")"); + sqlite3TreeViewLine(pView, "%s", zUniOp); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); } + sqlite3TreeViewPop(pView); } -#endif /* defined(SQLITE_ENABLE_TREE_EXPLAIN) */ +#endif /* SQLITE_DEBUG */ -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) +#ifdef SQLITE_DEBUG /* ** Generate a human-readable explanation of an expression list. */ -SQLITE_PRIVATE void sqlite3ExplainExprList(Vdbe *pOut, ExprList *pList){ +SQLITE_PRIVATE void sqlite3TreeViewExprList( + TreeView *pView, + const ExprList *pList, + u8 moreToFollow, + const char *zLabel +){ int i; - if( pList==0 || pList->nExpr==0 ){ - sqlite3ExplainPrintf(pOut, "(empty-list)"); - return; - }else if( pList->nExpr==1 ){ - sqlite3ExplainExpr(pOut, pList->a[0].pExpr); + pView = sqlite3TreeViewPush(pView, moreToFollow); + if( zLabel==0 || zLabel[0]==0 ) zLabel = "LIST"; + if( pList==0 ){ + sqlite3TreeViewLine(pView, "%s (empty)", zLabel); }else{ - sqlite3ExplainPush(pOut); + sqlite3TreeViewLine(pView, "%s", zLabel); for(i=0; inExpr; i++){ - sqlite3ExplainPrintf(pOut, "item[%d] = ", i); - sqlite3ExplainPush(pOut); - sqlite3ExplainExpr(pOut, pList->a[i].pExpr); - sqlite3ExplainPop(pOut); - if( pList->a[i].zName ){ + sqlite3TreeViewExpr(pView, pList->a[i].pExpr, inExpr-1); +#if 0 + if( pList->a[i].zName ){ sqlite3ExplainPrintf(pOut, " AS %s", pList->a[i].zName); } if( pList->a[i].bSpanIsTab ){ sqlite3ExplainPrintf(pOut, " (%s)", pList->a[i].zSpan); } - if( inExpr-1 ){ - sqlite3ExplainNL(pOut); - } +#endif } - sqlite3ExplainPop(pOut); } + sqlite3TreeViewPop(pView); } #endif /* SQLITE_DEBUG */ @@ -80562,7 +85374,7 @@ ** x>=y AND x<=z ** ** Code it as such, taking care to do the common subexpression -** elementation of x. +** elimination of x. */ static void exprCodeBetween( Parse *pParse, /* Parsing and code generating context */ @@ -80640,15 +85452,15 @@ sqlite3ExprCachePush(pParse); sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); sqlite3VdbeResolveLabel(v, d2); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); break; } case TK_OR: { testcase( jumpIfNull==0 ); sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); sqlite3ExprCachePush(pParse); sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); break; } case TK_NOT: { @@ -80794,7 +85606,7 @@ sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); sqlite3ExprCachePush(pParse); sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); break; } case TK_OR: { @@ -80804,7 +85616,7 @@ sqlite3ExprCachePush(pParse); sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); sqlite3VdbeResolveLabel(v, d2); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); break; } case TK_NOT: { @@ -81049,10 +85861,11 @@ int i; struct SrcCount *p = pWalker->u.pSrcCount; SrcList *pSrc = p->pSrc; - for(i=0; inSrc; i++){ + int nSrc = pSrc ? pSrc->nSrc : 0; + for(i=0; iiTable==pSrc->a[i].iCursor ) break; } - if( inSrc ){ + if( inThis++; }else{ p->nOther++; @@ -81299,7 +86112,7 @@ ** purpose. ** ** If a register is currently being used by the column cache, then -** the dallocation is deferred until the column cache line that uses +** the deallocation is deferred until the column cache line that uses ** the register becomes stale. */ SQLITE_PRIVATE void sqlite3ReleaseTempReg(Parse *pParse, int iReg){ @@ -81468,6 +86281,7 @@ int token; /* Type of token */ UNUSED_PARAMETER(NotUsed); + if( zInput==0 || zOld==0 ) return; for(z=zInput; *z; z=z+n){ n = sqlite3GetToken(z, &token); if( token==TK_REFERENCES ){ @@ -81525,8 +86339,8 @@ UNUSED_PARAMETER(NotUsed); /* The principle used to locate the table name in the CREATE TRIGGER - ** statement is that the table name is the first token that is immediatedly - ** preceded by either TK_ON or TK_DOT and immediatedly followed by one + ** statement is that the table name is the first token that is immediately + ** preceded by either TK_ON or TK_DOT and immediately followed by one ** of TK_WHEN, TK_BEGIN or TK_FOR. */ if( zSql ){ @@ -82217,7 +87031,7 @@ ** not possible to enable both STAT3 and STAT4 at the same time. If they ** are both enabled, then STAT4 takes precedence. ** -** For most applications, sqlite_stat1 provides all the statisics required +** For most applications, sqlite_stat1 provides all the statistics required ** for the query planner to make good choices. ** ** Format of sqlite_stat1: @@ -82427,6 +87241,7 @@ assert( i1 ); /* >1 because it includes the rowid column */ + assert( nCol>0 ); nColUp = sizeof(tRowcnt)<8 ? (nCol+1)&~1 : nCol; + nKeyCol = sqlite3_value_int(argv[1]); + assert( nKeyCol<=nCol ); + assert( nKeyCol>0 ); /* Allocate the space required for the Stat4Accum object */ n = sizeof(*p) @@ -82596,6 +87430,7 @@ p->db = db; p->nRow = 0; p->nCol = nCol; + p->nKeyCol = nKeyCol; p->current.anDLt = (tRowcnt*)&p[1]; p->current.anEq = &p->current.anDLt[nColUp]; @@ -82606,9 +87441,9 @@ p->iGet = -1; p->mxSample = mxSample; - p->nPSample = (tRowcnt)(sqlite3_value_int64(argv[1])/(mxSample/3+1) + 1); + p->nPSample = (tRowcnt)(sqlite3_value_int64(argv[2])/(mxSample/3+1) + 1); p->current.anLt = &p->current.anEq[nColUp]; - p->iPrn = nCol*0x689e962d ^ sqlite3_value_int(argv[1])*0xd0944565; + p->iPrn = 0x689e962d*(u32)nCol ^ 0xd0944565*(u32)sqlite3_value_int(argv[2]); /* Set up the Stat4Accum.a[] and aBest[] arrays */ p->a = (struct Stat4Sample*)&p->current.anLt[nColUp]; @@ -82627,11 +87462,14 @@ } #endif - /* Return a pointer to the allocated object to the caller */ - sqlite3_result_blob(context, p, sizeof(p), stat4Destructor); + /* Return a pointer to the allocated object to the caller. Note that + ** only the pointer (the 2nd parameter) matters. The size of the object + ** (given by the 3rd parameter) is never used and can be any positive + ** value. */ + sqlite3_result_blob(context, p, sizeof(*p), stat4Destructor); } static const FuncDef statInitFuncdef = { - 1+IsStat34, /* nArg */ + 2+IsStat34, /* nArg */ SQLITE_UTF8, /* funcFlags */ 0, /* pUserData */ 0, /* pNext */ @@ -82855,7 +87693,10 @@ ** R Rowid for the current row. Might be a key record for ** WITHOUT ROWID tables. ** -** The SQL function always returns NULL. +** This SQL function always returns NULL. It's purpose it to accumulate +** statistical data and/or samples in the Stat4Accum object about the +** index being analyzed. The stat_get() SQL function will later be used to +** extract relevant information for constructing the sqlite_statN tables. ** ** The R parameter is only used for STAT3 and STAT4 */ @@ -82872,7 +87713,7 @@ UNUSED_PARAMETER( argc ); UNUSED_PARAMETER( context ); - assert( p->nCol>1 ); /* Includes rowid field */ + assert( p->nCol>0 ); assert( iChngnCol ); if( p->nRow==0 ){ @@ -82949,7 +87790,10 @@ /* ** Implementation of the stat_get(P,J) SQL function. This routine is -** used to query the results. Content is returned for parameter J +** used to query statistical information that has been gathered into +** the Stat4Accum object by prior calls to stat_push(). The P parameter +** has type BLOB but it is really just a pointer to the Stat4Accum object. +** The content to returned is determined by the parameter J ** which is one of the STAT_GET_xxxx values defined above. ** ** If neither STAT3 nor STAT4 are enabled, then J is always @@ -83000,15 +87844,15 @@ char *z; int i; - char *zRet = sqlite3MallocZero(p->nCol * 25); + char *zRet = sqlite3MallocZero( (p->nKeyCol+1)*25 ); if( zRet==0 ){ sqlite3_result_error_nomem(context); return; } sqlite3_snprintf(24, zRet, "%llu", (u64)p->nRow); z = zRet + sqlite3Strlen30(zRet); - for(i=0; i<(p->nCol-1); i++){ + for(i=0; inKeyCol; i++){ u64 nDistinct = p->current.anDLt[i] + 1; u64 iVal = (p->nRow + nDistinct - 1) / nDistinct; sqlite3_snprintf(24, z, " %llu", iVal); @@ -83168,27 +88012,27 @@ sqlite3VdbeAddOp4(v, OP_String8, 0, regTabname, 0, pTab->zName, 0); for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - int nCol; /* Number of columns indexed by pIdx */ - int *aGotoChng; /* Array of jump instruction addresses */ + int nCol; /* Number of columns in pIdx. "N" */ int addrRewind; /* Address of "OP_Rewind iIdxCur" */ - int addrGotoChng0; /* Address of "Goto addr_chng_0" */ int addrNextRow; /* Address of "next_row:" */ const char *zIdxName; /* Name of the index */ + int nColTest; /* Number of columns to test for changes */ if( pOnlyIdx && pOnlyIdx!=pIdx ) continue; if( pIdx->pPartIdxWhere==0 ) needTableCnt = 0; - VdbeNoopComment((v, "Begin analysis of %s", pIdx->zName)); - nCol = pIdx->nKeyCol; - aGotoChng = sqlite3DbMallocRaw(db, sizeof(int)*(nCol+1)); - if( aGotoChng==0 ) continue; - - /* Populate the register containing the index name. */ - if( pIdx->autoIndex==2 && !HasRowid(pTab) ){ + if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIdx) ){ + nCol = pIdx->nKeyCol; zIdxName = pTab->zName; + nColTest = nCol - 1; }else{ + nCol = pIdx->nColumn; zIdxName = pIdx->zName; + nColTest = pIdx->uniqNotNull ? pIdx->nKeyCol-1 : nCol-1; } + + /* Populate the register containing the index name. */ sqlite3VdbeAddOp4(v, OP_String8, 0, regIdxname, 0, zIdxName, 0); + VdbeComment((v, "Analysis for %s.%s", pTab->zName, zIdxName)); /* ** Pseudo-code for loop that calls stat_push(): @@ -83213,7 +88057,7 @@ ** regPrev(1) = idx(1) ** ... ** - ** chng_addr_N: + ** endDistinctTest: ** regRowid = idx(rowid) ** stat_push(P, regChng, regRowid) ** Next csr @@ -83226,7 +88070,7 @@ ** the regPrev array and a trailing rowid (the rowid slot is required ** when building a record to insert into the sample column of ** the sqlite_stat4 table. */ - pParse->nMem = MAX(pParse->nMem, regPrev+nCol); + pParse->nMem = MAX(pParse->nMem, regPrev+nColTest); /* Open a read-only cursor on the index being analyzed. */ assert( iDb==sqlite3SchemaToIndex(db, pIdx->pSchema) ); @@ -83236,18 +88080,22 @@ /* Invoke the stat_init() function. The arguments are: ** - ** (1) the number of columns in the index including the rowid, - ** (2) the number of rows in the index, + ** (1) the number of columns in the index including the rowid + ** (or for a WITHOUT ROWID table, the number of PK columns), + ** (2) the number of columns in the key without the rowid/pk + ** (3) the number of rows in the index, ** - ** The second argument is only used for STAT3 and STAT4 + ** + ** The third argument is only used for STAT3 and STAT4 */ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 - sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regStat4+2); + sqlite3VdbeAddOp2(v, OP_Count, iIdxCur, regStat4+3); #endif - sqlite3VdbeAddOp2(v, OP_Integer, nCol+1, regStat4+1); + sqlite3VdbeAddOp2(v, OP_Integer, nCol, regStat4+1); + sqlite3VdbeAddOp2(v, OP_Integer, pIdx->nKeyCol, regStat4+2); sqlite3VdbeAddOp3(v, OP_Function, 0, regStat4+1, regStat4); sqlite3VdbeChangeP4(v, -1, (char*)&statInitFuncdef, P4_FUNCDEF); - sqlite3VdbeChangeP5(v, 1+IsStat34); + sqlite3VdbeChangeP5(v, 2+IsStat34); /* Implementation of the following: ** @@ -83260,52 +88108,69 @@ addrRewind = sqlite3VdbeAddOp1(v, OP_Rewind, iIdxCur); VdbeCoverage(v); sqlite3VdbeAddOp2(v, OP_Integer, 0, regChng); - addrGotoChng0 = sqlite3VdbeAddOp0(v, OP_Goto); - - /* - ** next_row: - ** regChng = 0 - ** if( idx(0) != regPrev(0) ) goto chng_addr_0 - ** regChng = 1 - ** if( idx(1) != regPrev(1) ) goto chng_addr_1 - ** ... - ** regChng = N - ** goto chng_addr_N - */ addrNextRow = sqlite3VdbeCurrentAddr(v); - for(i=0; iazColl[i]); - sqlite3VdbeAddOp2(v, OP_Integer, i, regChng); - sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regTemp); - aGotoChng[i] = - sqlite3VdbeAddOp4(v, OP_Ne, regTemp, 0, regPrev+i, pColl, P4_COLLSEQ); - sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); - VdbeCoverage(v); - } - sqlite3VdbeAddOp2(v, OP_Integer, nCol, regChng); - aGotoChng[nCol] = sqlite3VdbeAddOp0(v, OP_Goto); - /* - ** chng_addr_0: - ** regPrev(0) = idx(0) - ** chng_addr_1: - ** regPrev(1) = idx(1) - ** ... - */ - sqlite3VdbeJumpHere(v, addrGotoChng0); - for(i=0; i0 ){ + int endDistinctTest = sqlite3VdbeMakeLabel(v); + int *aGotoChng; /* Array of jump instruction addresses */ + aGotoChng = sqlite3DbMallocRaw(db, sizeof(int)*nColTest); + if( aGotoChng==0 ) continue; + /* + ** next_row: + ** regChng = 0 + ** if( idx(0) != regPrev(0) ) goto chng_addr_0 + ** regChng = 1 + ** if( idx(1) != regPrev(1) ) goto chng_addr_1 + ** ... + ** regChng = N + ** goto endDistinctTest + */ + sqlite3VdbeAddOp0(v, OP_Goto); + addrNextRow = sqlite3VdbeCurrentAddr(v); + if( nColTest==1 && pIdx->nKeyCol==1 && IsUniqueIndex(pIdx) ){ + /* For a single-column UNIQUE index, once we have found a non-NULL + ** row, we know that all the rest will be distinct, so skip + ** subsequent distinctness tests. */ + sqlite3VdbeAddOp2(v, OP_NotNull, regPrev, endDistinctTest); + VdbeCoverage(v); + } + for(i=0; iazColl[i]); + sqlite3VdbeAddOp2(v, OP_Integer, i, regChng); + sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, i, regTemp); + aGotoChng[i] = + sqlite3VdbeAddOp4(v, OP_Ne, regTemp, 0, regPrev+i, pColl, P4_COLLSEQ); + sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); + VdbeCoverage(v); + } + sqlite3VdbeAddOp2(v, OP_Integer, nColTest, regChng); + sqlite3VdbeAddOp2(v, OP_Goto, 0, endDistinctTest); + + + /* + ** chng_addr_0: + ** regPrev(0) = idx(0) + ** chng_addr_1: + ** regPrev(1) = idx(1) + ** ... + */ + sqlite3VdbeJumpHere(v, addrNextRow-1); + for(i=0; inMem = MAX(pParse->nMem, regCol+nCol+1); + pParse->nMem = MAX(pParse->nMem, regCol+nCol); addrNext = sqlite3VdbeCurrentAddr(v); callStatGet(v, regStat4, STAT_GET_ROWID, regSampleRowid); @@ -83371,7 +88237,7 @@ i16 iCol = pIdx->aiColumn[i]; sqlite3ExprCodeGetColumnOfTable(v, pTab, iTabCur, iCol, regCol+i); } - sqlite3VdbeAddOp3(v, OP_MakeRecord, regCol, nCol+1, regSample); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regCol, nCol, regSample); #endif sqlite3VdbeAddOp3(v, OP_MakeRecord, regTabname, 6, regTemp); sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur+1, regNewRowid); @@ -83383,7 +88249,6 @@ /* End of analysis */ sqlite3VdbeJumpHere(v, addrRewind); - sqlite3DbFree(db, aGotoChng); } @@ -83395,7 +88260,8 @@ sqlite3VdbeAddOp2(v, OP_Count, iTabCur, regStat1); jZeroRows = sqlite3VdbeAddOp1(v, OP_IfNot, regStat1); VdbeCoverage(v); sqlite3VdbeAddOp2(v, OP_Null, 0, regIdxname); - sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "aaa", 0); + assert( "BBB"[0]==SQLITE_AFF_TEXT ); + sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "BBB", 0); sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); sqlite3VdbeChangeP5(v, OPFLAG_APPEND); @@ -83484,6 +88350,7 @@ Table *pTab; Index *pIdx; Token *pTableName; + Vdbe *v; /* Read the database schema. If an error occurs, leave an error message ** and code in pParse and return NULL. */ @@ -83531,6 +88398,8 @@ } } } + v = sqlite3GetVdbe(pParse); + if( v ) sqlite3VdbeAddOp0(v, OP_Expire); } /* @@ -83552,6 +88421,7 @@ char *zIntArray, /* String containing int array to decode */ int nOut, /* Number of slots in aOut[] */ tRowcnt *aOut, /* Store integers here */ + LogEst *aLog, /* Or, if aOut==0, here */ Index *pIndex /* Handle extra flags for this index, if not NULL */ ){ char *z = zIntArray; @@ -83562,29 +88432,47 @@ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 if( z==0 ) z = ""; #else - if( NEVER(z==0) ) z = ""; + assert( z!=0 ); #endif for(i=0; *z && i='0' && c<='9' ){ v = v*10 + c - '0'; z++; } - aOut[i] = v; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( aOut ) aOut[i] = v; + if( aLog ) aLog[i] = sqlite3LogEst(v); +#else + assert( aOut==0 ); + UNUSED_PARAMETER(aOut); + assert( aLog!=0 ); + aLog[i] = sqlite3LogEst(v); +#endif if( *z==' ' ) z++; } #ifndef SQLITE_ENABLE_STAT3_OR_STAT4 - assert( pIndex!=0 ); + assert( pIndex!=0 ); { #else - if( pIndex ) + if( pIndex ){ #endif - { - if( strcmp(z, "unordered")==0 ){ - pIndex->bUnordered = 1; - }else if( sqlite3_strglob("sz=[0-9]*", z)==0 ){ - int v32 = 0; - sqlite3GetInt32(z+3, &v32); - pIndex->szIdxRow = sqlite3LogEst(v32); + pIndex->bUnordered = 0; + pIndex->noSkipScan = 0; + while( z[0] ){ + if( sqlite3_strglob("unordered*", z)==0 ){ + pIndex->bUnordered = 1; + }else if( sqlite3_strglob("sz=[0-9]*", z)==0 ){ + pIndex->szIdxRow = sqlite3LogEst(sqlite3Atoi(z+3)); + }else if( sqlite3_strglob("noskipscan*", z)==0 ){ + pIndex->noSkipScan = 1; + } +#ifdef SQLITE_ENABLE_COSTMULT + else if( sqlite3_strglob("costmult=[0-9]*",z)==0 ){ + pIndex->pTable->costMult = sqlite3LogEst(sqlite3Atoi(z+9)); + } +#endif + while( z[0]!=0 && z[0]!=' ' ) z++; + while( z[0]==' ' ) z++; } } } @@ -83626,12 +88514,25 @@ z = argv[2]; if( pIndex ){ - decodeIntArray((char*)z, pIndex->nKeyCol+1, pIndex->aiRowEst, pIndex); - if( pIndex->pPartIdxWhere==0 ) pTable->nRowEst = pIndex->aiRowEst[0]; + int nCol = pIndex->nKeyCol+1; +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + tRowcnt * const aiRowEst = pIndex->aiRowEst = (tRowcnt*)sqlite3MallocZero( + sizeof(tRowcnt) * nCol + ); + if( aiRowEst==0 ) pInfo->db->mallocFailed = 1; +#else + tRowcnt * const aiRowEst = 0; +#endif + pIndex->bUnordered = 0; + decodeIntArray((char*)z, nCol, aiRowEst, pIndex->aiRowLogEst, pIndex); + if( pIndex->pPartIdxWhere==0 ) pTable->nRowLogEst = pIndex->aiRowLogEst[0]; }else{ Index fakeIdx; fakeIdx.szIdxRow = pTable->szTabRow; - decodeIntArray((char*)z, 1, &pTable->nRowEst, &fakeIdx); +#ifdef SQLITE_ENABLE_COSTMULT + fakeIdx.pTable = pTable; +#endif + decodeIntArray((char*)z, 1, 0, &pTable->nRowLogEst, &fakeIdx); pTable->szTabRow = fakeIdx.szIdxRow; } @@ -83672,30 +88573,52 @@ IndexSample *aSample = pIdx->aSample; IndexSample *pFinal = &aSample[pIdx->nSample-1]; int iCol; - for(iCol=0; iColnKeyCol; iCol++){ + int nCol = 1; + if( pIdx->nSampleCol>1 ){ + /* If this is stat4 data, then calculate aAvgEq[] values for all + ** sample columns except the last. The last is always set to 1, as + ** once the trailing PK fields are considered all index keys are + ** unique. */ + nCol = pIdx->nSampleCol-1; + pIdx->aAvgEq[nCol] = 1; + } + for(iCol=0; iColnSample; int i; /* Used to iterate through samples */ tRowcnt sumEq = 0; /* Sum of the nEq values */ - tRowcnt nSum = 0; /* Number of terms contributing to sumEq */ tRowcnt avgEq = 0; - tRowcnt nDLt = pFinal->anDLt[iCol]; + tRowcnt nRow; /* Number of rows in index */ + i64 nSum100 = 0; /* Number of terms contributing to sumEq */ + i64 nDist100; /* Number of distinct values in index */ + if( !pIdx->aiRowEst || iCol>=pIdx->nKeyCol || pIdx->aiRowEst[iCol+1]==0 ){ + nRow = pFinal->anLt[iCol]; + nDist100 = (i64)100 * pFinal->anDLt[iCol]; + nSample--; + }else{ + nRow = pIdx->aiRowEst[0]; + nDist100 = ((i64)100 * pIdx->aiRowEst[0]) / pIdx->aiRowEst[iCol+1]; + } + pIdx->nRowEst0 = nRow; + /* Set nSum to the number of distinct (iCol+1) field prefixes that - ** occur in the stat4 table for this index before pFinal. Set - ** sumEq to the sum of the nEq values for column iCol for the same - ** set (adding the value only once where there exist dupicate - ** prefixes). */ - for(i=0; i<(pIdx->nSample-1); i++){ - if( aSample[i].anDLt[iCol]!=aSample[i+1].anDLt[iCol] ){ + ** occur in the stat4 table for this index. Set sumEq to the sum of + ** the nEq values for column iCol for the same set (adding the value + ** only once where there exist duplicate prefixes). */ + for(i=0; inSample-1) + || aSample[i].anDLt[iCol]!=aSample[i+1].anDLt[iCol] + ){ sumEq += aSample[i].anEq[iCol]; - nSum++; + nSum100 += 100; } } - if( nDLt>nSum ){ - avgEq = (pFinal->anLt[iCol] - sumEq)/(nDLt - nSum); + + if( nDist100>nSum100 ){ + avgEq = ((i64)100 * (nRow - sumEq))/(nDist100 - nSum100); } if( avgEq==0 ) avgEq = 1; pIdx->aAvgEq[iCol] = avgEq; - if( pIdx->nSampleCol==1 ) break; } } } @@ -83754,7 +88677,6 @@ while( sqlite3_step(pStmt)==SQLITE_ROW ){ int nIdxCol = 1; /* Number of columns in stat4 records */ - int nAvgCol = 1; /* Number of entries in Index.aAvgEq */ char *zIndex; /* Index name */ Index *pIdx; /* Pointer to the index object */ @@ -83772,21 +88694,25 @@ ** loaded from the stat4 table. In this case ignore stat3 data. */ if( pIdx==0 || pIdx->nSample ) continue; if( bStat3==0 ){ - nIdxCol = pIdx->nKeyCol+1; - nAvgCol = pIdx->nKeyCol; + assert( !HasRowid(pIdx->pTable) || pIdx->nColumn==pIdx->nKeyCol+1 ); + if( !HasRowid(pIdx->pTable) && IsPrimaryKeyIndex(pIdx) ){ + nIdxCol = pIdx->nKeyCol; + }else{ + nIdxCol = pIdx->nColumn; + } } pIdx->nSampleCol = nIdxCol; nByte = sizeof(IndexSample) * nSample; nByte += sizeof(tRowcnt) * nIdxCol * 3 * nSample; - nByte += nAvgCol * sizeof(tRowcnt); /* Space for Index.aAvgEq[] */ + nByte += nIdxCol * sizeof(tRowcnt); /* Space for Index.aAvgEq[] */ pIdx->aSample = sqlite3DbMallocZero(db, nByte); if( pIdx->aSample==0 ){ sqlite3_finalize(pStmt); return SQLITE_NOMEM; } pSpace = (tRowcnt*)&pIdx->aSample[nSample]; - pIdx->aAvgEq = pSpace; pSpace += nAvgCol; + pIdx->aAvgEq = pSpace; pSpace += nIdxCol; for(i=0; iaSample[i].anEq = pSpace; pSpace += nIdxCol; pIdx->aSample[i].anLt = pSpace; pSpace += nIdxCol; @@ -83823,9 +88749,9 @@ pPrevIdx = pIdx; } pSample = &pIdx->aSample[pIdx->nSample]; - decodeIntArray((char*)sqlite3_column_text(pStmt,1), nCol, pSample->anEq, 0); - decodeIntArray((char*)sqlite3_column_text(pStmt,2), nCol, pSample->anLt, 0); - decodeIntArray((char*)sqlite3_column_text(pStmt,3), nCol, pSample->anDLt,0); + decodeIntArray((char*)sqlite3_column_text(pStmt,1),nCol,pSample->anEq,0,0); + decodeIntArray((char*)sqlite3_column_text(pStmt,2),nCol,pSample->anLt,0,0); + decodeIntArray((char*)sqlite3_column_text(pStmt,3),nCol,pSample->anDLt,0,0); /* Take a copy of the sample. Add two 0x00 bytes the end of the buffer. ** This is in case the sample record is corrupted. In that case, the @@ -83935,12 +88861,17 @@ /* Load the statistics from the sqlite_stat4 table. */ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 - if( rc==SQLITE_OK ){ + if( rc==SQLITE_OK && OptimizationEnabled(db, SQLITE_Stat34) ){ int lookasideEnabled = db->lookaside.bEnabled; db->lookaside.bEnabled = 0; rc = loadStat4(db, sInfo.zDatabase); db->lookaside.bEnabled = lookasideEnabled; } + for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ + Index *pIdx = sqliteHashData(i); + sqlite3_free(pIdx->aiRowEst); + pIdx->aiRowEst = 0; + } #endif if( rc==SQLITE_NOMEM ){ @@ -84105,13 +89036,15 @@ "attached databases must use the same text encoding as main database"); rc = SQLITE_ERROR; } + sqlite3BtreeEnter(aNew->pBt); pPager = sqlite3BtreePager(aNew->pBt); sqlite3PagerLockingMode(pPager, db->dfltLockMode); sqlite3BtreeSecureDelete(aNew->pBt, sqlite3BtreeSecureDelete(db->aDb[0].pBt,-1) ); #ifndef SQLITE_OMIT_PAGER_PRAGMAS sqlite3BtreeSetPagerFlags(aNew->pBt, 3 | (db->flags & PAGER_FLAGS_MASK)); #endif + sqlite3BtreeLeave(aNew->pBt); } aNew->safety_level = 3; aNew->zName = sqlite3DbStrDup(db, zName); @@ -84162,6 +89095,15 @@ rc = sqlite3Init(db, &zErrDyn); sqlite3BtreeLeaveAll(db); } +#ifdef SQLITE_USER_AUTHENTICATION + if( rc==SQLITE_OK ){ + u8 newAuth = 0; + rc = sqlite3UserAuthCheckLogin(db, zName, &newAuth); + if( newAuthauth.authLevel ){ + rc = SQLITE_AUTH_USER; + } + } +#endif if( rc ){ int iDb = db->nDb - 1; assert( iDb>=2 ); @@ -84603,8 +89545,11 @@ int (*xAuth)(void*,int,const char*,const char*,const char*,const char*), void *pArg ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); - db->xAuth = xAuth; + db->xAuth = (sqlite3_xauth)xAuth; db->pAuthArg = pArg; sqlite3ExpirePreparedStatements(db); sqlite3_mutex_leave(db->mutex); @@ -84639,7 +89584,11 @@ char *zDb = db->aDb[iDb].zName; /* Name of attached database */ int rc; /* Auth callback return code */ - rc = db->xAuth(db->pAuthArg, SQLITE_READ, zTab,zCol,zDb,pParse->zAuthContext); + rc = db->xAuth(db->pAuthArg, SQLITE_READ, zTab,zCol,zDb,pParse->zAuthContext +#ifdef SQLITE_USER_AUTHENTICATION + ,db->auth.zAuthUser +#endif + ); if( rc==SQLITE_DENY ){ if( db->nDb>2 || iDb!=0 ){ sqlite3ErrorMsg(pParse, "access to %s.%s.%s is prohibited",zDb,zTab,zCol); @@ -84739,7 +89688,11 @@ if( db->xAuth==0 ){ return SQLITE_OK; } - rc = db->xAuth(db->pAuthArg, code, zArg1, zArg2, zArg3, pParse->zAuthContext); + rc = db->xAuth(db->pAuthArg, code, zArg1, zArg2, zArg3, pParse->zAuthContext +#ifdef SQLITE_USER_AUTHENTICATION + ,db->auth.zAuthUser +#endif + ); if( rc==SQLITE_DENY ){ sqlite3ErrorMsg(pParse, "not authorized"); pParse->rc = SQLITE_AUTH; @@ -84896,6 +89849,19 @@ #endif /* +** Return TRUE if the given yDbMask object is empty - if it contains no +** 1 bits. This routine is used by the DbMaskAllZero() and DbMaskNotZero() +** macros when SQLITE_MAX_ATTACHED is greater than 30. +*/ +#if SQLITE_MAX_ATTACHED>30 +SQLITE_PRIVATE int sqlite3DbMaskAllZero(yDbMask m){ + int i; + for(i=0; inTableLock>0 && db->init.busy==0 ){ + sqlite3UserAuthInit(db); + if( db->auth.authLevelrc = SQLITE_AUTH_USER; + sqlite3ErrorMsg(pParse, "user not authenticated"); + return; + } + } +#endif + /* The cookie mask contains one bit for each database file open. ** (Bit 0 is for main, bit 1 is for temp, and so forth.) Bits are ** set for each database that is used. Generate code to start a ** transaction on each used database and to verify the schema cookie ** on each used database. */ - if( db->mallocFailed==0 && (pParse->cookieMask || pParse->pConstExpr) ){ - yDbMask mask; + if( db->mallocFailed==0 + && (DbMaskNonZero(pParse->cookieMask) || pParse->pConstExpr) + ){ int iDb, i; assert( sqlite3VdbeGetOp(v, 0)->opcode==OP_Init ); sqlite3VdbeJumpHere(v, 0); - for(iDb=0, mask=1; iDbnDb; mask<<=1, iDb++){ - if( (mask & pParse->cookieMask)==0 ) continue; + for(iDb=0; iDbnDb; iDb++){ + if( DbMaskTest(pParse->cookieMask, iDb)==0 ) continue; sqlite3VdbeUsesBtree(v, iDb); sqlite3VdbeAddOp4Int(v, OP_Transaction, /* Opcode */ iDb, /* P1 */ - (mask & pParse->writeMask)!=0, /* P2 */ + DbMaskTest(pParse->writeMask,iDb), /* P2 */ pParse->cookieValue[iDb], /* P3 */ db->aDb[iDb].pSchema->iGeneration /* P4 */ ); @@ -84998,7 +89976,7 @@ pParse->nMem = 0; pParse->nSet = 0; pParse->nVar = 0; - pParse->cookieMask = 0; + DbMaskZero(pParse->cookieMask); } /* @@ -85039,7 +90017,17 @@ pParse->nested--; } +#if SQLITE_USER_AUTHENTICATION /* +** Return TRUE if zTable is the name of the system table that stores the +** list of users and their access credentials. +*/ +SQLITE_PRIVATE int sqlite3UserAuthTable(const char *zTable){ + return sqlite3_stricmp(zTable, "sqlite_user")==0; +} +#endif + +/* ** Locate the in-memory structure that describes a particular database ** table given the name of that table and (optionally) the name of the ** database containing the table. Return NULL if not found. @@ -85054,16 +90042,25 @@ SQLITE_PRIVATE Table *sqlite3FindTable(sqlite3 *db, const char *zName, const char *zDatabase){ Table *p = 0; int i; - int nName; - assert( zName!=0 ); - nName = sqlite3Strlen30(zName); + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return 0; +#endif + /* All mutexes are required for schema access. Make sure we hold them. */ assert( zDatabase!=0 || sqlite3BtreeHoldsAllMutexes(db) ); +#if SQLITE_USER_AUTHENTICATION + /* Only the admin user is allowed to know that the sqlite_user table + ** exists */ + if( db->auth.authLevelnDb; i++){ int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ if( zDatabase!=0 && sqlite3StrICmp(zDatabase, db->aDb[j].zName) ) continue; assert( sqlite3SchemaMutexHeld(db, j, 0) ); - p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName, nName); + p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName); if( p ) break; } return p; @@ -85103,6 +90100,12 @@ } pParse->checkSchema = 1; } +#if SQLITE_USER_AUTHENICATION + else if( pParse->db->auth.authLevelnDb; i++){ @@ -85155,7 +90157,7 @@ assert( pSchema ); if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zName) ) continue; assert( sqlite3SchemaMutexHeld(db, j, 0) ); - p = sqlite3HashFind(&pSchema->idxHash, zName, nName); + p = sqlite3HashFind(&pSchema->idxHash, zName); if( p ) break; } return p; @@ -85168,10 +90170,12 @@ #ifndef SQLITE_OMIT_ANALYZE sqlite3DeleteIndexSamples(db, p); #endif - if( db==0 || db->pnBytesFreed==0 ) sqlite3KeyInfoUnref(p->pKeyInfo); sqlite3ExprDelete(db, p->pPartIdxWhere); sqlite3DbFree(db, p->zColAff); if( p->isResized ) sqlite3DbFree(db, p->azColl); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + sqlite3_free(p->aiRowEst); +#endif sqlite3DbFree(db, p); } @@ -85183,13 +90187,11 @@ */ SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3 *db, int iDb, const char *zIdxName){ Index *pIndex; - int len; Hash *pHash; assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); pHash = &db->aDb[iDb].pSchema->idxHash; - len = sqlite3Strlen30(zIdxName); - pIndex = sqlite3HashInsert(pHash, zIdxName, len, 0); + pIndex = sqlite3HashInsert(pHash, zIdxName, 0); if( ALWAYS(pIndex) ){ if( pIndex->pTable->pIndex==pIndex ){ pIndex->pTable->pIndex = pIndex->pNext; @@ -85349,7 +90351,7 @@ if( !db || db->pnBytesFreed==0 ){ char *zName = pIndex->zName; TESTONLY ( Index *pOld = ) sqlite3HashInsert( - &pIndex->pSchema->idxHash, zName, sqlite3Strlen30(zName), 0 + &pIndex->pSchema->idxHash, zName, 0 ); assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); assert( pOld==pIndex || pOld==0 ); @@ -85392,8 +90394,7 @@ assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); testcase( zTabName[0]==0 ); /* Zero-length table names are allowed */ pDb = &db->aDb[iDb]; - p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, - sqlite3Strlen30(zTabName),0); + p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, 0); sqlite3DeleteTable(db, p); db->flags |= SQLITE_InternChanges; } @@ -85539,7 +90540,7 @@ */ SQLITE_PRIVATE Index *sqlite3PrimaryKeyIndex(Table *pTab){ Index *p; - for(p=pTab->pIndex; p && p->autoIndex!=2; p=p->pNext){} + for(p=pTab->pIndex; p && !IsPrimaryKeyIndex(p); p=p->pNext){} return p; } @@ -85687,7 +90688,7 @@ pTable->iPKey = -1; pTable->pSchema = db->aDb[iDb].pSchema; pTable->nRef = 1; - pTable->nRowEst = 1048576; + pTable->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); assert( pParse->pNewTable==0 ); pParse->pNewTable = pTable; @@ -85917,7 +90918,7 @@ ** estimate is scaled so that the size of an integer is 1. */ if( pszEst ){ *pszEst = 1; /* default size is approx 4 bytes */ - if( aff<=SQLITE_AFF_NONE ){ + if( affpNewTable; if( p!=0 ){ pCol = &(p->aCol[p->nCol-1]); - if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr) ){ + if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr, db->init.busy) ){ sqlite3ErrorMsg(pParse, "default value of column [%s] is not constant", pCol->zName); }else{ @@ -86068,7 +91069,7 @@ p = sqlite3CreateIndex(pParse, 0, 0, 0, pList, onError, 0, 0, sortOrder, 0); if( p ){ - p->autoIndex = 2; + p->idxType = SQLITE_IDXTYPE_PRIMARYKEY; if( v ) sqlite3VdbeJumpHere(v, pParse->addrSkipPK); } pList = 0; @@ -86088,7 +91089,10 @@ ){ #ifndef SQLITE_OMIT_CHECK Table *pTab = pParse->pNewTable; - if( pTab && !IN_DECLARE_VTAB ){ + sqlite3 *db = pParse->db; + if( pTab && !IN_DECLARE_VTAB + && !sqlite3BtreeIsReadonly(db->aDb[db->init.iDb].pBt) + ){ pTab->pCheck = sqlite3ExprListAppend(pParse, pTab->pCheck, pCheckExpr); if( pParse->constraintName.n ){ sqlite3ExprListSetName(pParse, pTab->pCheck, &pParse->constraintName, 1); @@ -86285,8 +91289,8 @@ zStmt[k++] = '('; for(pCol=p->aCol, i=0; inCol; i++, pCol++){ static const char * const azType[] = { - /* SQLITE_AFF_TEXT */ " TEXT", /* SQLITE_AFF_NONE */ "", + /* SQLITE_AFF_TEXT */ " TEXT", /* SQLITE_AFF_NUMERIC */ " NUM", /* SQLITE_AFF_INTEGER */ " INT", /* SQLITE_AFF_REAL */ " REAL" @@ -86298,15 +91302,15 @@ k += sqlite3Strlen30(&zStmt[k]); zSep = zSep2; identPut(zStmt, &k, pCol->zName); - assert( pCol->affinity-SQLITE_AFF_TEXT >= 0 ); - assert( pCol->affinity-SQLITE_AFF_TEXT < ArraySize(azType) ); - testcase( pCol->affinity==SQLITE_AFF_TEXT ); + assert( pCol->affinity-SQLITE_AFF_NONE >= 0 ); + assert( pCol->affinity-SQLITE_AFF_NONE < ArraySize(azType) ); testcase( pCol->affinity==SQLITE_AFF_NONE ); + testcase( pCol->affinity==SQLITE_AFF_TEXT ); testcase( pCol->affinity==SQLITE_AFF_NUMERIC ); testcase( pCol->affinity==SQLITE_AFF_INTEGER ); testcase( pCol->affinity==SQLITE_AFF_REAL ); - zType = azType[pCol->affinity - SQLITE_AFF_TEXT]; + zType = azType[pCol->affinity - SQLITE_AFF_NONE]; len = sqlite3Strlen30(zType); assert( pCol->affinity==SQLITE_AFF_NONE || pCol->affinity==sqlite3AffinityType(zType, 0) ); @@ -86390,7 +91394,7 @@ ** no rowid btree for a WITHOUT ROWID. Instead, the canonical ** data storage is a covering index btree. ** (2) Bypass the creation of the sqlite_master table entry -** for the PRIMARY KEY as the the primary key index is now +** for the PRIMARY KEY as the primary key index is now ** identified by the sqlite_master table entry of the table itself. ** (3) Set the Index.tnum of the PRIMARY KEY Index object in the ** schema to the rootpage from the main table. @@ -86411,7 +91415,7 @@ Vdbe *v = pParse->pVdbe; /* Convert the OP_CreateTable opcode that would normally create the - ** root-page for the table into a OP_CreateIndex opcode. The index + ** root-page for the table into an OP_CreateIndex opcode. The index ** created will become the PRIMARY KEY index. */ if( pParse->addrCrTab ){ @@ -86440,10 +91444,23 @@ assert( pParse->pNewTable==pTab ); pPk = sqlite3CreateIndex(pParse, 0, 0, 0, pList, pTab->keyConf, 0, 0, 0, 0); if( pPk==0 ) return; - pPk->autoIndex = 2; + pPk->idxType = SQLITE_IDXTYPE_PRIMARYKEY; pTab->iPKey = -1; }else{ pPk = sqlite3PrimaryKeyIndex(pTab); + /* + ** Remove all redundant columns from the PRIMARY KEY. For example, change + ** "PRIMARY KEY(a,b,a,b,c,b,c,d)" into just "PRIMARY KEY(a,b,c,d)". Later + ** code assumes the PRIMARY KEY contains no repeated columns. + */ + for(i=j=1; inKeyCol; i++){ + if( hasColumn(pPk->aiColumn, j, pPk->aiColumn[i]) ){ + pPk->nColumn--; + }else{ + pPk->aiColumn[j++] = pPk->aiColumn[i]; + } + } + pPk->nKeyCol = j; } pPk->isCovering = 1; assert( pPk!=0 ); @@ -86463,7 +91480,7 @@ */ for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ int n; - if( pIdx->autoIndex==2 ) continue; + if( IsPrimaryKeyIndex(pIdx) ) continue; for(i=n=0; iaiColumn, pIdx->nKeyCol, pPk->aiColumn[i]) ) n++; } @@ -86712,8 +91729,7 @@ Table *pOld; Schema *pSchema = p->pSchema; assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pOld = sqlite3HashInsert(&pSchema->tblHash, p->zName, - sqlite3Strlen30(p->zName),p); + pOld = sqlite3HashInsert(&pSchema->tblHash, p->zName, p); if( pOld ){ assert( p==pOld ); /* Malloc must have failed inside HashInsert() */ db->mallocFailed = 1; @@ -86824,7 +91840,7 @@ int nErr = 0; /* Number of errors encountered */ int n; /* Temporarily holds the number of cursors assigned */ sqlite3 *db = pParse->db; /* Database connection for malloc errors */ - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); + sqlite3_xauth xAuth; /* Saved xAuth pointer */ assert( pTable ); @@ -86895,7 +91911,7 @@ pSelTab->aCol = 0; sqlite3DeleteTable(db, pSelTab); assert( sqlite3SchemaMutexHeld(db, 0, pTable->pSchema) ); - pTable->pSchema->flags |= DB_UnresetViews; + pTable->pSchema->schemaFlags |= DB_UnresetViews; }else{ pTable->nCol = 0; nErr++; @@ -87363,7 +92379,7 @@ assert( sqlite3SchemaMutexHeld(db, 0, p->pSchema) ); pNextTo = (FKey *)sqlite3HashInsert(&p->pSchema->fkeyHash, - pFKey->zTo, sqlite3Strlen30(pFKey->zTo), (void *)pFKey + pFKey->zTo, (void *)pFKey ); if( pNextTo==pFKey ){ db->mallocFailed = 1; @@ -87426,7 +92442,7 @@ int iPartIdxLabel; /* Jump to this label to skip a row */ Vdbe *v; /* Generate code into this virtual machine */ KeyInfo *pKey; /* KeyInfo for index */ - int regRecord; /* Register holding assemblied index record */ + int regRecord; /* Register holding assembled index record */ sqlite3 *db = pParse->db; /* The database connection */ int iDb = sqlite3SchemaToIndex(db, pIndex->pSchema); @@ -87451,7 +92467,7 @@ /* Open the sorter cursor if we are to use one. */ iSorter = pParse->nTab++; - sqlite3VdbeAddOp4(v, OP_SorterOpen, iSorter, 0, 0, (char*) + sqlite3VdbeAddOp4(v, OP_SorterOpen, iSorter, 0, pIndex->nKeyCol, (char*) sqlite3KeyInfoRef(pKey), P4_KEYINFO); /* Open the table. Loop through all rows of the table, inserting index @@ -87462,7 +92478,7 @@ sqlite3GenerateIndexKey(pParse,pIndex,iTab,regRecord,0,&iPartIdxLabel,0,0); sqlite3VdbeAddOp2(v, OP_SorterInsert, iSorter, regRecord); - sqlite3VdbeResolveLabel(v, iPartIdxLabel); + sqlite3ResolvePartIdxLabel(pParse, iPartIdxLabel); sqlite3VdbeAddOp2(v, OP_Next, iTab, addr1+1); VdbeCoverage(v); sqlite3VdbeJumpHere(v, addr1); if( memRootPage<0 ) sqlite3VdbeAddOp2(v, OP_Clear, tnum, iDb); @@ -87472,17 +92488,17 @@ addr1 = sqlite3VdbeAddOp2(v, OP_SorterSort, iSorter, 0); VdbeCoverage(v); assert( pKey!=0 || db->mallocFailed || pParse->nErr ); - if( pIndex->onError!=OE_None && pKey!=0 ){ + if( IsUniqueIndex(pIndex) && pKey!=0 ){ int j2 = sqlite3VdbeCurrentAddr(v) + 3; sqlite3VdbeAddOp2(v, OP_Goto, 0, j2); addr2 = sqlite3VdbeCurrentAddr(v); sqlite3VdbeAddOp4Int(v, OP_SorterCompare, iSorter, j2, regRecord, - pKey->nField - pIndex->nKeyCol); VdbeCoverage(v); + pIndex->nKeyCol); VdbeCoverage(v); sqlite3UniqueConstraint(pParse, OE_Abort, pIndex); }else{ addr2 = sqlite3VdbeCurrentAddr(v); } - sqlite3VdbeAddOp2(v, OP_SorterData, iSorter, regRecord); + sqlite3VdbeAddOp3(v, OP_SorterData, iSorter, regRecord, iIdx); sqlite3VdbeAddOp3(v, OP_IdxInsert, iIdx, regRecord, 1); sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); sqlite3ReleaseTempReg(pParse, regRecord); @@ -87512,15 +92528,15 @@ nByte = ROUND8(sizeof(Index)) + /* Index structure */ ROUND8(sizeof(char*)*nCol) + /* Index.azColl */ - ROUND8(sizeof(tRowcnt)*(nCol+1) + /* Index.aiRowEst */ + ROUND8(sizeof(LogEst)*(nCol+1) + /* Index.aiRowLogEst */ sizeof(i16)*nCol + /* Index.aiColumn */ sizeof(u8)*nCol); /* Index.aSortOrder */ p = sqlite3DbMallocZero(db, nByte + nExtra); if( p ){ char *pExtra = ((char*)p)+ROUND8(sizeof(Index)); - p->azColl = (char**)pExtra; pExtra += ROUND8(sizeof(char*)*nCol); - p->aiRowEst = (tRowcnt*)pExtra; pExtra += sizeof(tRowcnt)*(nCol+1); - p->aiColumn = (i16*)pExtra; pExtra += sizeof(i16)*nCol; + p->azColl = (char**)pExtra; pExtra += ROUND8(sizeof(char*)*nCol); + p->aiRowLogEst = (LogEst*)pExtra; pExtra += sizeof(LogEst)*(nCol+1); + p->aiColumn = (i16*)pExtra; pExtra += sizeof(i16)*nCol; p->aSortOrder = (u8*)pExtra; p->nColumn = nCol; p->nKeyCol = nCol - 1; @@ -87543,7 +92559,7 @@ ** ** If the index is created successfully, return a pointer to the new Index ** structure. This is used by sqlite3AddPrimaryKey() to mark the index -** as the tables primary key (Index.autoIndex==2). +** as the tables primary key (Index.idxType==SQLITE_IDXTYPE_PRIMARYKEY) */ SQLITE_PRIVATE Index *sqlite3CreateIndex( Parse *pParse, /* All information about this parse */ @@ -87639,6 +92655,10 @@ assert( pTab!=0 ); assert( pParse->nErr==0 ); if( sqlite3StrNICmp(pTab->zName, "sqlite_", 7)==0 + && db->init.busy==0 +#if SQLITE_USER_AUTHENTICATION + && sqlite3UserAuthTable(pTab->zName)==0 +#endif && sqlite3StrNICmp(&pTab->zName[7],"altertab_",9)!=0 ){ sqlite3ErrorMsg(pParse, "table %s may not be indexed", pTab->zName); goto exit_create_index; @@ -87750,15 +92770,15 @@ if( db->mallocFailed ){ goto exit_create_index; } - assert( EIGHT_BYTE_ALIGNMENT(pIndex->aiRowEst) ); + assert( EIGHT_BYTE_ALIGNMENT(pIndex->aiRowLogEst) ); assert( EIGHT_BYTE_ALIGNMENT(pIndex->azColl) ); pIndex->zName = zExtra; zExtra += nName + 1; memcpy(pIndex->zName, zName, nName+1); pIndex->pTable = pTab; pIndex->onError = (u8)onError; pIndex->uniqNotNull = onError!=OE_None; - pIndex->autoIndex = (u8)(pName==0); + pIndex->idxType = pName ? SQLITE_IDXTYPE_APPDEF : SQLITE_IDXTYPE_UNIQUE; pIndex->pSchema = db->aDb[iDb].pSchema; pIndex->nKeyCol = pList->nExpr; if( pPIWhere ){ @@ -87800,7 +92820,7 @@ pParse->checkSchema = 1; goto exit_create_index; } - assert( pTab->nCol<=0x7fff && j<=0x7fff ); + assert( j<=0x7fff ); pIndex->aiColumn[i] = (i16)j; if( pListItem->pExpr ){ int nColl; @@ -87869,9 +92889,9 @@ Index *pIdx; for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ int k; - assert( pIdx->onError!=OE_None ); - assert( pIdx->autoIndex ); - assert( pIndex->onError!=OE_None ); + assert( IsUniqueIndex(pIdx) ); + assert( pIdx->idxType!=SQLITE_IDXTYPE_APPDEF ); + assert( IsUniqueIndex(pIndex) ); if( pIdx->nKeyCol!=pIndex->nKeyCol ) continue; for(k=0; knKeyCol; k++){ @@ -87911,8 +92931,7 @@ Index *p; assert( sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); p = sqlite3HashInsert(&pIndex->pSchema->idxHash, - pIndex->zName, sqlite3Strlen30(pIndex->zName), - pIndex); + pIndex->zName, pIndex); if( p ){ assert( p==pIndex ); /* Malloc must have failed */ db->mallocFailed = 1; @@ -88027,11 +93046,11 @@ ** Fill the Index.aiRowEst[] array with default information - information ** to be used when we have not run the ANALYZE command. ** -** aiRowEst[0] is suppose to contain the number of elements in the index. +** aiRowEst[0] is supposed to contain the number of elements in the index. ** Since we do not know, guess 1 million. aiRowEst[1] is an estimate of the ** number of rows in the table that match any particular value of the ** first column of the index. aiRowEst[2] is an estimate of the number -** of rows that match any particular combiniation of the first 2 columns +** of rows that match any particular combination of the first 2 columns ** of the index. And so forth. It must always be the case that * ** aiRowEst[N]<=aiRowEst[N-1] @@ -88042,20 +93061,27 @@ ** are based on typical values found in actual indices. */ SQLITE_PRIVATE void sqlite3DefaultRowEst(Index *pIdx){ - tRowcnt *a = pIdx->aiRowEst; + /* 10, 9, 8, 7, 6 */ + LogEst aVal[] = { 33, 32, 30, 28, 26 }; + LogEst *a = pIdx->aiRowLogEst; + int nCopy = MIN(ArraySize(aVal), pIdx->nKeyCol); int i; - tRowcnt n; - assert( a!=0 ); - a[0] = pIdx->pTable->nRowEst; - if( a[0]<10 ) a[0] = 10; - n = 10; - for(i=1; i<=pIdx->nKeyCol; i++){ - a[i] = n; - if( n>5 ) n--; + + /* Set the first entry (number of rows in the index) to the estimated + ** number of rows in the table. Or 10, if the estimated number of rows + ** in the table is less than that. */ + a[0] = pIdx->pTable->nRowLogEst; + if( a[0]<33 ) a[0] = 33; assert( 33==sqlite3LogEst(10) ); + + /* Estimate that a[1] is 10, a[2] is 9, a[3] is 8, a[4] is 7, a[5] is + ** 6 and each subsequent value (if any) is 5. */ + memcpy(&a[1], aVal, nCopy*sizeof(LogEst)); + for(i=nCopy+1; i<=pIdx->nKeyCol; i++){ + a[i] = 23; assert( 23==sqlite3LogEst(5) ); } - if( pIdx->onError!=OE_None ){ - a[pIdx->nKeyCol] = 1; - } + + assert( 0==sqlite3LogEst(1) ); + if( IsUniqueIndex(pIdx) ) a[pIdx->nKeyCol] = 0; } /* @@ -88086,7 +93112,7 @@ pParse->checkSchema = 1; goto exit_drop_index; } - if( pIndex->autoIndex ){ + if( pIndex->idxType!=SQLITE_IDXTYPE_APPDEF ){ sqlite3ErrorMsg(pParse, "index associated with UNIQUE " "or PRIMARY KEY constraint cannot be dropped", 0); goto exit_drop_index; @@ -88399,7 +93425,7 @@ ** if this is the first term of the FROM clause. pTable and pDatabase ** are the name of the table and database named in the FROM clause term. ** pDatabase is NULL if the database name qualifier is missing - the -** usual case. If the term has a alias, then pAlias points to the +** usual case. If the term has an alias, then pAlias points to the ** alias token. If the term is a subquery, then pSubquery is the ** SELECT statement that the subquery encodes. The pTable and ** pDatabase parameters are NULL for subqueries. The pOn and pUsing @@ -88615,15 +93641,13 @@ SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse *pParse, int iDb){ Parse *pToplevel = sqlite3ParseToplevel(pParse); sqlite3 *db = pToplevel->db; - yDbMask mask; assert( iDb>=0 && iDbnDb ); assert( db->aDb[iDb].pBt!=0 || iDb==1 ); assert( iDbcookieMask & mask)==0 ){ - pToplevel->cookieMask |= mask; + if( DbMaskTest(pToplevel->cookieMask, iDb)==0 ){ + DbMaskSet(pToplevel->cookieMask, iDb); pToplevel->cookieValue[iDb] = db->aDb[iDb].pSchema->schema_cookie; if( !OMIT_TEMPDB && iDb==1 ){ sqlite3OpenTempDatabase(pToplevel); @@ -88662,7 +93686,7 @@ SQLITE_PRIVATE void sqlite3BeginWriteOperation(Parse *pParse, int setStatement, int iDb){ Parse *pToplevel = sqlite3ParseToplevel(pParse); sqlite3CodeVerifySchema(pParse, iDb); - pToplevel->writeMask |= ((yDbMask)1)<writeMask, iDb); pToplevel->isMultiWrite |= setStatement; } @@ -88745,7 +93769,8 @@ } zErr = sqlite3StrAccumFinish(&errMsg); sqlite3HaltConstraint(pParse, - (pIdx->autoIndex==2)?SQLITE_CONSTRAINT_PRIMARYKEY:SQLITE_CONSTRAINT_UNIQUE, + IsPrimaryKeyIndex(pIdx) ? SQLITE_CONSTRAINT_PRIMARYKEY + : SQLITE_CONSTRAINT_UNIQUE, onError, zErr, P4_DYNAMIC, P5_ConstraintUnique); } @@ -88912,40 +93937,31 @@ ** when it has finished using it. */ SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoOfIndex(Parse *pParse, Index *pIdx){ + int i; + int nCol = pIdx->nColumn; + int nKey = pIdx->nKeyCol; + KeyInfo *pKey; if( pParse->nErr ) return 0; -#ifndef SQLITE_OMIT_SHARED_CACHE - if( pIdx->pKeyInfo && pIdx->pKeyInfo->db!=pParse->db ){ - sqlite3KeyInfoUnref(pIdx->pKeyInfo); - pIdx->pKeyInfo = 0; + if( pIdx->uniqNotNull ){ + pKey = sqlite3KeyInfoAlloc(pParse->db, nKey, nCol-nKey); + }else{ + pKey = sqlite3KeyInfoAlloc(pParse->db, nCol, 0); } -#endif - if( pIdx->pKeyInfo==0 ){ - int i; - int nCol = pIdx->nColumn; - int nKey = pIdx->nKeyCol; - KeyInfo *pKey; - if( pIdx->uniqNotNull ){ - pKey = sqlite3KeyInfoAlloc(pParse->db, nKey, nCol-nKey); - }else{ - pKey = sqlite3KeyInfoAlloc(pParse->db, nCol, 0); + if( pKey ){ + assert( sqlite3KeyInfoIsWriteable(pKey) ); + for(i=0; iazColl[i]; + assert( zColl!=0 ); + pKey->aColl[i] = strcmp(zColl,"BINARY")==0 ? 0 : + sqlite3LocateCollSeq(pParse, zColl); + pKey->aSortOrder[i] = pIdx->aSortOrder[i]; } - if( pKey ){ - assert( sqlite3KeyInfoIsWriteable(pKey) ); - for(i=0; iazColl[i]; - assert( zColl!=0 ); - pKey->aColl[i] = strcmp(zColl,"BINARY")==0 ? 0 : - sqlite3LocateCollSeq(pParse, zColl); - pKey->aSortOrder[i] = pIdx->aSortOrder[i]; - } - if( pParse->nErr ){ - sqlite3KeyInfoUnref(pKey); - }else{ - pIdx->pKeyInfo = pKey; - } + if( pParse->nErr ){ + sqlite3KeyInfoUnref(pKey); + pKey = 0; } } - return sqlite3KeyInfoRef(pIdx->pKeyInfo); + return pKey; } #ifndef SQLITE_OMIT_CTE @@ -89163,7 +94179,7 @@ ** ** Each pointer stored in the sqlite3.aCollSeq hash table contains an ** array of three CollSeq structures. The first is the collation sequence -** prefferred for UTF-8, the second UTF-16le, and the third UTF-16be. +** preferred for UTF-8, the second UTF-16le, and the third UTF-16be. ** ** Stored immediately after the three collation sequences is a copy of ** the collation sequence name. A pointer to this string is stored in @@ -89175,11 +94191,11 @@ int create /* Create a new entry if true */ ){ CollSeq *pColl; - int nName = sqlite3Strlen30(zName); - pColl = sqlite3HashFind(&db->aCollSeq, zName, nName); + pColl = sqlite3HashFind(&db->aCollSeq, zName); if( 0==pColl && create ){ - pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName + 1 ); + int nName = sqlite3Strlen30(zName); + pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName + 1); if( pColl ){ CollSeq *pDel = 0; pColl[0].zName = (char*)&pColl[3]; @@ -89190,7 +94206,7 @@ pColl[2].enc = SQLITE_UTF16BE; memcpy(pColl[0].zName, zName, nName); pColl[0].zName[nName] = 0; - pDel = sqlite3HashInsert(&db->aCollSeq, pColl[0].zName, nName, pColl); + pDel = sqlite3HashInsert(&db->aCollSeq, pColl[0].zName, pColl); /* If a malloc() failure occurred in sqlite3HashInsert(), it will ** return the pColl pointer to be deleted (because it wasn't added @@ -89468,9 +94484,9 @@ sqlite3HashClear(&temp1); sqlite3HashClear(&pSchema->fkeyHash); pSchema->pSeqTab = 0; - if( pSchema->flags & DB_SchemaLoaded ){ + if( pSchema->schemaFlags & DB_SchemaLoaded ){ pSchema->iGeneration++; - pSchema->flags &= ~DB_SchemaLoaded; + pSchema->schemaFlags &= ~DB_SchemaLoaded; } } @@ -89590,7 +94606,7 @@ Parse *pParse, /* Parsing context */ Table *pView, /* View definition */ Expr *pWhere, /* Optional WHERE clause to be added */ - int iCur /* Cursor number for ephemerial table */ + int iCur /* Cursor number for ephemeral table */ ){ SelectDest dest; Select *pSel; @@ -89726,8 +94742,8 @@ WhereInfo *pWInfo; /* Information about the WHERE clause */ Index *pIdx; /* For looping over indices of the table */ int iTabCur; /* Cursor number for the table */ - int iDataCur; /* VDBE cursor for the canonical data source */ - int iIdxCur; /* Cursor number of the first index */ + int iDataCur = 0; /* VDBE cursor for the canonical data source */ + int iIdxCur = 0; /* Cursor number of the first index */ int nIdx; /* Number of indices */ sqlite3 *db; /* Main database structure */ AuthContext sContext; /* Authorization context */ @@ -89748,7 +94764,7 @@ int addrBypass = 0; /* Address of jump over the delete logic */ int addrLoop = 0; /* Top of the delete loop */ int addrDelete = 0; /* Jump directly to the delete logic */ - int addrEphOpen = 0; /* Instruction to open the Ephermeral table */ + int addrEphOpen = 0; /* Instruction to open the Ephemeral table */ #ifndef SQLITE_OMIT_TRIGGER int isView; /* True if attempting to delete from a view */ @@ -89828,7 +94844,7 @@ sqlite3BeginWriteOperation(pParse, 1, iDb); /* If we are trying to delete from a view, realize that view into - ** a ephemeral table. + ** an ephemeral table. */ #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) if( isView ){ @@ -89882,7 +94898,7 @@ iRowSet = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Null, 0, iRowSet); }else{ - /* For a WITHOUT ROWID table, create an ephermeral table used to + /* For a WITHOUT ROWID table, create an ephemeral table used to ** hold all primary keys for rows to be deleted. */ pPk = sqlite3PrimaryKeyIndex(pTab); assert( pPk!=0 ); @@ -89966,20 +94982,22 @@ ** triggers. */ if( !isView ){ + testcase( IsVirtual(pTab) ); sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, iTabCur, aToOpen, &iDataCur, &iIdxCur); - assert( pPk || iDataCur==iTabCur ); - assert( pPk || iIdxCur==iDataCur+1 ); + assert( pPk || IsVirtual(pTab) || iDataCur==iTabCur ); + assert( pPk || IsVirtual(pTab) || iIdxCur==iDataCur+1 ); } /* Set up a loop over the rowids/primary-keys that were found in the ** where-clause loop above. */ if( okOnePass ){ /* Just one row. Hence the top-of-loop is a no-op */ - assert( nKey==nPk ); /* OP_Found will use an unpacked key */ + assert( nKey==nPk ); /* OP_Found will use an unpacked key */ + assert( !IsVirtual(pTab) ); if( aToOpen[iDataCur-iTabCur] ){ - assert( pPk!=0 ); + assert( pPk!=0 || pTab->pSelect!=0 ); sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, addrBypass, iKey, nKey); VdbeCoverage(v); } @@ -90055,7 +95073,7 @@ return; } /* Make sure "isView" and other macros defined above are undefined. Otherwise -** thely may interfere with compilation of other functions in this file +** they may interfere with compilation of other functions in this file ** (or in another file, if this file becomes part of the amalgamation). */ #ifdef isView #undef isView @@ -90239,7 +95257,7 @@ &iPartIdxLabel, pPrior, r1); sqlite3VdbeAddOp3(v, OP_IdxDelete, iIdxCur+i, r1, pIdx->uniqNotNull ? pIdx->nKeyCol : pIdx->nColumn); - sqlite3VdbeResolveLabel(v, iPartIdxLabel); + sqlite3ResolvePartIdxLabel(pParse, iPartIdxLabel); pPrior = pIdx; } } @@ -90258,10 +95276,11 @@ ** ** If *piPartIdxLabel is not NULL, fill it in with a label and jump ** to that label if pIdx is a partial index that should be skipped. +** The label should be resolved using sqlite3ResolvePartIdxLabel(). ** A partial index should be skipped if its WHERE clause evaluates ** to false or null. If pIdx is not a partial index, *piPartIdxLabel ** will be set to zero which is an empty label that is ignored by -** sqlite3VdbeResolveLabel(). +** sqlite3ResolvePartIdxLabel(). ** ** The pPrior and regPrior parameters are used to implement a cache to ** avoid unnecessary register loads. If pPrior is not NULL, then it is @@ -90294,6 +95313,7 @@ if( pIdx->pPartIdxWhere ){ *piPartIdxLabel = sqlite3VdbeMakeLabel(v); pParse->iPartIdxTab = iDataCur; + sqlite3ExprCachePush(pParse); sqlite3ExprIfFalse(pParse, pIdx->pPartIdxWhere, *piPartIdxLabel, SQLITE_JUMPIFNULL); }else{ @@ -90322,6 +95342,18 @@ return regBase; } +/* +** If a prior call to sqlite3GenerateIndexKey() generated a jump-over label +** because it was a partial index, then this routine should be called to +** resolve that label. +*/ +SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse *pParse, int iLabel){ + if( iLabel ){ + sqlite3VdbeResolveLabel(pParse->pVdbe, iLabel); + sqlite3ExprCachePop(pParse); + } +} + /************** End of delete.c **********************************************/ /************** Begin file func.c ********************************************/ /* @@ -90335,12 +95367,9 @@ ** May you share freely, never taking more than you give. ** ************************************************************************* -** This file contains the C functions that implement various SQL -** functions of SQLite. -** -** There is only one exported symbol in this file - the function -** sqliteRegisterBuildinFunctions() found at the bottom of the file. -** All other code has file scope. +** This file contains the C-language implementations for many of the SQL +** functions of SQLite. (Some function, and in particular the date and +** time functions, are implemented separately.) */ /* #include */ /* #include */ @@ -90349,7 +95378,10 @@ ** Return the collating function associated with a function. */ static CollSeq *sqlite3GetFuncCollSeq(sqlite3_context *context){ - return context->pColl; + VdbeOp *pOp = &context->pVdbe->aOp[context->iOp-1]; + assert( pOp->opcode==OP_CollSeq ); + assert( pOp->p4type==P4_COLLSEQ ); + return pOp->p4.pColl; } /* @@ -90481,8 +95513,8 @@ default: { /* Because sqlite3_value_double() returns 0.0 if the argument is not ** something that can be converted into a number, we have: - ** IMP: R-57326-31541 Abs(X) return 0.0 if X is a string or blob that - ** cannot be converted to a numeric value. + ** IMP: R-01992-00519 Abs(X) returns 0.0 if X is a string or blob + ** that cannot be converted to a numeric value. */ double rVal = sqlite3_value_double(argv[0]); if( rVal<0 ) rVal = -rVal; @@ -90652,13 +95684,14 @@ for(z2=z; *z2 && p2; p2--){ SQLITE_SKIP_UTF8(z2); } - sqlite3_result_text(context, (char*)z, (int)(z2-z), SQLITE_TRANSIENT); + sqlite3_result_text64(context, (char*)z, z2-z, SQLITE_TRANSIENT, + SQLITE_UTF8); }else{ if( p1+p2>len ){ p2 = len-p1; if( p2<0 ) p2 = 0; } - sqlite3_result_blob(context, (char*)&z[p1], (int)p2, SQLITE_TRANSIENT); + sqlite3_result_blob64(context, (char*)&z[p1], (u64)p2, SQLITE_TRANSIENT); } } @@ -90717,7 +95750,7 @@ sqlite3_result_error_toobig(context); z = 0; }else{ - z = sqlite3Malloc((int)nByte); + z = sqlite3Malloc(nByte); if( !z ){ sqlite3_result_error_nomem(context); } @@ -90893,10 +95926,12 @@ ** whereas only characters less than 0x80 do in ASCII. */ #if defined(SQLITE_EBCDIC) -# define sqlite3Utf8Read(A) (*((*A)++)) -# define GlobUpperToLower(A) A = sqlite3UpperToLower[A] +# define sqlite3Utf8Read(A) (*((*A)++)) +# define GlobUpperToLower(A) A = sqlite3UpperToLower[A] +# define GlobUpperToLowerAscii(A) A = sqlite3UpperToLower[A] #else -# define GlobUpperToLower(A) if( !((A)&~0x7f) ){ A = sqlite3UpperToLower[A]; } +# define GlobUpperToLower(A) if( A<=0x7f ){ A = sqlite3UpperToLower[A]; } +# define GlobUpperToLowerAscii(A) A = sqlite3UpperToLower[A] #endif static const struct compareInfo globInfo = { '*', '?', '[', 0 }; @@ -90909,7 +95944,7 @@ /* ** Compare two UTF-8 strings for equality where the first string can -** potentially be a "glob" expression. Return true (1) if they +** potentially be a "glob" or "like" expression. Return true (1) if they ** are the same and false (0) if they are different. ** ** Globbing rules: @@ -90929,116 +95964,143 @@ ** "[a-z]" matches any single lower-case letter. To match a '-', make ** it the last character in the list. ** -** This routine is usually quick, but can be N**2 in the worst case. +** Like matching rules: +** +** '%' Matches any sequence of zero or more characters ** -** Hints: to match '*' or '?', put them in "[]". Like this: +*** '_' Matches any one character ** -** abc[*]xyz Matches "abc*xyz" only +** Ec Where E is the "esc" character and c is any other +** character, including '%', '_', and esc, match exactly c. +** +** The comments through this routine usually assume glob matching. +** +** This routine is usually quick, but can be N**2 in the worst case. */ static int patternCompare( const u8 *zPattern, /* The glob pattern */ const u8 *zString, /* The string to compare against the glob */ const struct compareInfo *pInfo, /* Information about how to do the compare */ u32 esc /* The escape character */ ){ - u32 c, c2; - int invert; - int seen; - u8 matchOne = pInfo->matchOne; - u8 matchAll = pInfo->matchAll; - u8 matchSet = pInfo->matchSet; - u8 noCase = pInfo->noCase; - int prevEscape = 0; /* True if the previous character was 'escape' */ + u32 c, c2; /* Next pattern and input string chars */ + u32 matchOne = pInfo->matchOne; /* "?" or "_" */ + u32 matchAll = pInfo->matchAll; /* "*" or "%" */ + u32 matchOther; /* "[" or the escape character */ + u8 noCase = pInfo->noCase; /* True if uppercase==lowercase */ + const u8 *zEscaped = 0; /* One past the last escaped input char */ + + /* The GLOB operator does not have an ESCAPE clause. And LIKE does not + ** have the matchSet operator. So we either have to look for one or + ** the other, never both. Hence the single variable matchOther is used + ** to store the one we have to look for. + */ + matchOther = esc ? esc : pInfo->matchSet; while( (c = sqlite3Utf8Read(&zPattern))!=0 ){ - if( c==matchAll && !prevEscape ){ + if( c==matchAll ){ /* Match "*" */ + /* Skip over multiple "*" characters in the pattern. If there + ** are also "?" characters, skip those as well, but consume a + ** single character of the input string for each "?" skipped */ while( (c=sqlite3Utf8Read(&zPattern)) == matchAll || c == matchOne ){ if( c==matchOne && sqlite3Utf8Read(&zString)==0 ){ return 0; } } if( c==0 ){ - return 1; - }else if( c==esc ){ - c = sqlite3Utf8Read(&zPattern); - if( c==0 ){ - return 0; + return 1; /* "*" at the end of the pattern matches */ + }else if( c==matchOther ){ + if( esc ){ + c = sqlite3Utf8Read(&zPattern); + if( c==0 ) return 0; + }else{ + /* "[...]" immediately follows the "*". We have to do a slow + ** recursive search in this case, but it is an unusual case. */ + assert( matchOther<0x80 ); /* '[' is a single-byte character */ + while( *zString + && patternCompare(&zPattern[-1],zString,pInfo,esc)==0 ){ + SQLITE_SKIP_UTF8(zString); + } + return *zString!=0; } - }else if( c==matchSet ){ - assert( esc==0 ); /* This is GLOB, not LIKE */ - assert( matchSet<0x80 ); /* '[' is a single-byte character */ - while( *zString && patternCompare(&zPattern[-1],zString,pInfo,esc)==0 ){ - SQLITE_SKIP_UTF8(zString); - } - return *zString!=0; } - while( (c2 = sqlite3Utf8Read(&zString))!=0 ){ + + /* At this point variable c contains the first character of the + ** pattern string past the "*". Search in the input string for the + ** first matching character and recursively contine the match from + ** that point. + ** + ** For a case-insensitive search, set variable cx to be the same as + ** c but in the other case and search the input string for either + ** c or cx. + */ + if( c<=0x80 ){ + u32 cx; if( noCase ){ - GlobUpperToLower(c2); - GlobUpperToLower(c); - while( c2 != 0 && c2 != c ){ - c2 = sqlite3Utf8Read(&zString); - GlobUpperToLower(c2); - } + cx = sqlite3Toupper(c); + c = sqlite3Tolower(c); }else{ - while( c2 != 0 && c2 != c ){ - c2 = sqlite3Utf8Read(&zString); - } + cx = c; } - if( c2==0 ) return 0; - if( patternCompare(zPattern,zString,pInfo,esc) ) return 1; + while( (c2 = *(zString++))!=0 ){ + if( c2!=c && c2!=cx ) continue; + if( patternCompare(zPattern,zString,pInfo,esc) ) return 1; + } + }else{ + while( (c2 = sqlite3Utf8Read(&zString))!=0 ){ + if( c2!=c ) continue; + if( patternCompare(zPattern,zString,pInfo,esc) ) return 1; + } } return 0; - }else if( c==matchOne && !prevEscape ){ - if( sqlite3Utf8Read(&zString)==0 ){ - return 0; - } - }else if( c==matchSet ){ - u32 prior_c = 0; - assert( esc==0 ); /* This only occurs for GLOB, not LIKE */ - seen = 0; - invert = 0; - c = sqlite3Utf8Read(&zString); - if( c==0 ) return 0; - c2 = sqlite3Utf8Read(&zPattern); - if( c2=='^' ){ - invert = 1; + } + if( c==matchOther ){ + if( esc ){ + c = sqlite3Utf8Read(&zPattern); + if( c==0 ) return 0; + zEscaped = zPattern; + }else{ + u32 prior_c = 0; + int seen = 0; + int invert = 0; + c = sqlite3Utf8Read(&zString); + if( c==0 ) return 0; c2 = sqlite3Utf8Read(&zPattern); - } - if( c2==']' ){ - if( c==']' ) seen = 1; - c2 = sqlite3Utf8Read(&zPattern); - } - while( c2 && c2!=']' ){ - if( c2=='-' && zPattern[0]!=']' && zPattern[0]!=0 && prior_c>0 ){ + if( c2=='^' ){ + invert = 1; c2 = sqlite3Utf8Read(&zPattern); - if( c>=prior_c && c<=c2 ) seen = 1; - prior_c = 0; - }else{ - if( c==c2 ){ - seen = 1; + } + if( c2==']' ){ + if( c==']' ) seen = 1; + c2 = sqlite3Utf8Read(&zPattern); + } + while( c2 && c2!=']' ){ + if( c2=='-' && zPattern[0]!=']' && zPattern[0]!=0 && prior_c>0 ){ + c2 = sqlite3Utf8Read(&zPattern); + if( c>=prior_c && c<=c2 ) seen = 1; + prior_c = 0; + }else{ + if( c==c2 ){ + seen = 1; + } + prior_c = c2; } - prior_c = c2; + c2 = sqlite3Utf8Read(&zPattern); } - c2 = sqlite3Utf8Read(&zPattern); + if( c2==0 || (seen ^ invert)==0 ){ + return 0; + } + continue; } - if( c2==0 || (seen ^ invert)==0 ){ - return 0; - } - }else if( esc==c && !prevEscape ){ - prevEscape = 1; - }else{ - c2 = sqlite3Utf8Read(&zString); - if( noCase ){ - GlobUpperToLower(c); - GlobUpperToLower(c2); - } - if( c!=c2 ){ - return 0; - } - prevEscape = 0; } + c2 = sqlite3Utf8Read(&zString); + if( c==c2 ) continue; + if( noCase && c<0x80 && c2<0x80 && sqlite3Tolower(c)==sqlite3Tolower(c2) ){ + continue; + } + if( c==matchOne && zPattern!=zEscaped && c2!=0 ) continue; + return 0; } return *zString==0; } @@ -91368,7 +96430,7 @@ *zOut++ = 0x80 + (u8)(c & 0x3F); } \ } - sqlite3_result_text(context, (char*)z, (int)(zOut-z), sqlite3_free); + sqlite3_result_text64(context, (char*)z, zOut-z, sqlite3_free, SQLITE_UTF8); } /* @@ -91818,6 +96880,7 @@ sqlite3SkipAccumulatorLoad(context); } }else{ + pBest->db = sqlite3_context_db_handle(context); sqlite3VdbeMemCopy(pBest, pArg); } } @@ -91865,7 +96928,7 @@ } zVal = (char*)sqlite3_value_text(argv[0]); nVal = sqlite3_value_bytes(argv[0]); - if( nVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal); + if( zVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal); } } static void groupConcatFinalize(sqlite3_context *context){ @@ -91965,7 +97028,7 @@ } /* -** All all of the FuncDef structures in the aBuiltinFunc[] array above +** All of the FuncDef structures in the aBuiltinFunc[] array above ** to the global function hash table. This occurs at start-time (as ** a consequence of calling sqlite3_initialize()). ** @@ -91989,10 +97052,12 @@ FUNCTION(trim, 2, 3, 0, trimFunc ), FUNCTION(min, -1, 0, 1, minmaxFunc ), FUNCTION(min, 0, 0, 1, 0 ), - AGGREGATE(min, 1, 0, 1, minmaxStep, minMaxFinalize ), + AGGREGATE2(min, 1, 0, 1, minmaxStep, minMaxFinalize, + SQLITE_FUNC_MINMAX ), FUNCTION(max, -1, 1, 1, minmaxFunc ), FUNCTION(max, 0, 1, 1, 0 ), - AGGREGATE(max, 1, 1, 1, minmaxStep, minMaxFinalize ), + AGGREGATE2(max, 1, 1, 1, minmaxStep, minMaxFinalize, + SQLITE_FUNC_MINMAX ), FUNCTION2(typeof, 1, 0, 0, typeofFunc, SQLITE_FUNC_TYPEOF), FUNCTION2(length, 1, 0, 0, lengthFunc, SQLITE_FUNC_LENGTH), FUNCTION(instr, 2, 0, 0, instrFunc ), @@ -92015,12 +97080,16 @@ FUNCTION2(ifnull, 2, 0, 0, noopFunc, SQLITE_FUNC_COALESCE), FUNCTION2(unlikely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY), FUNCTION2(likelihood, 2, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY), + FUNCTION2(likely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY), VFUNCTION(random, 0, 0, 0, randomFunc ), VFUNCTION(randomblob, 1, 0, 0, randomBlob ), FUNCTION(nullif, 2, 0, 1, nullifFunc ), FUNCTION(sqlite_version, 0, 0, 0, versionFunc ), FUNCTION(sqlite_source_id, 0, 0, 0, sourceidFunc ), FUNCTION(sqlite_log, 2, 0, 0, errlogFunc ), +#if SQLITE_USER_AUTHENTICATION + FUNCTION(sqlite_crypt, 2, 0, 0, sqlite3CryptFunc ), +#endif #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS FUNCTION(sqlite_compileoption_used,1, 0, 0, compileoptionusedFunc ), FUNCTION(sqlite_compileoption_get, 1, 0, 0, compileoptiongetFunc ), @@ -92041,8 +97110,8 @@ AGGREGATE(sum, 1, 0, 0, sumStep, sumFinalize ), AGGREGATE(total, 1, 0, 0, sumStep, totalFinalize ), AGGREGATE(avg, 1, 0, 0, sumStep, avgFinalize ), - /* AGGREGATE(count, 0, 0, 0, countStep, countFinalize ), */ - {0,SQLITE_UTF8|SQLITE_FUNC_COUNT,0,0,0,countStep,countFinalize,"count",0,0}, + AGGREGATE2(count, 0, 0, 0, countStep, countFinalize, + SQLITE_FUNC_COUNT ), AGGREGATE(count, 1, 0, 0, countStep, countFinalize ), AGGREGATE(group_concat, 1, 0, 0, groupConcatStep, groupConcatFinalize), AGGREGATE(group_concat, 2, 0, 0, groupConcatStep, groupConcatFinalize), @@ -92249,7 +97318,7 @@ ** ** 4) No parent key columns were provided explicitly as part of the ** foreign key definition, and the PRIMARY KEY of the parent table -** consists of a a different number of columns to the child key in +** consists of a different number of columns to the child key in ** the child table. ** ** then non-zero is returned, and a "foreign key mismatch" error loaded @@ -92301,16 +97370,16 @@ } for(pIdx=pParent->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->nKeyCol==nCol && pIdx->onError!=OE_None ){ + if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) ){ /* pIdx is a UNIQUE index (or a PRIMARY KEY) and has the right number ** of columns. If each indexed column corresponds to a foreign key ** column of pFKey, then this index is a winner. */ if( zKey==0 ){ /* If zKey is NULL, then this foreign key is implicitly mapped to ** the PRIMARY KEY of table pParent. The PRIMARY KEY index may be - ** identified by the test (Index.autoIndex==2). */ - if( pIdx->autoIndex==2 ){ + ** identified by the test. */ + if( IsPrimaryKeyIndex(pIdx) ){ if( aiCol ){ int i; for(i=0; iaCol[i].iFrom; @@ -92513,7 +97582,7 @@ OE_Abort, 0, P4_STATIC, P5_ConstraintFK); }else{ if( nIncr>0 && pFKey->isDeferred==0 ){ - sqlite3ParseToplevel(pParse)->mayAbort = 1; + sqlite3MayAbort(pParse); } sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); } @@ -92585,6 +97654,10 @@ ** code for an SQL UPDATE operation, this function may be called twice - ** once to "delete" the old row and once to "insert" the new row. ** +** Parameter nIncr is passed -1 when inserting a row (as this may decrease +** the number of FK violations in the db) or +1 when deleting one (as this +** may increase the number of FK constraint problems). +** ** The code generated by this function scans through the rows in the child ** table that correspond to the parent table row being deleted or inserted. ** For each child row found, one of the following actions is taken: @@ -92701,13 +97774,9 @@ sqlite3ResolveExprNames(&sNameContext, pWhere); /* Create VDBE to loop through the entries in pSrc that match the WHERE - ** clause. If the constraint is not deferred, throw an exception for - ** each row found. Otherwise, for deferred constraints, increment the - ** deferred constraint counter by nIncr for each row selected. */ + ** clause. For each row found, increment either the deferred or immediate + ** foreign key constraint counter. */ pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0, 0); - if( nIncr>0 && pFKey->isDeferred==0 ){ - sqlite3ParseToplevel(pParse)->mayAbort = 1; - } sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); if( pWInfo ){ sqlite3WhereEnd(pWInfo); @@ -92735,8 +97804,7 @@ ** table). */ SQLITE_PRIVATE FKey *sqlite3FkReferences(Table *pTab){ - int nName = sqlite3Strlen30(pTab->zName); - return (FKey *)sqlite3HashFind(&pTab->pSchema->fkeyHash, pTab->zName, nName); + return (FKey *)sqlite3HashFind(&pTab->pSchema->fkeyHash, pTab->zName); } /* @@ -92888,6 +97956,24 @@ } /* +** Return true if the parser passed as the first argument is being +** used to code a trigger that is really a "SET NULL" action belonging +** to trigger pFKey. +*/ +static int isSetNullAction(Parse *pParse, FKey *pFKey){ + Parse *pTop = sqlite3ParseToplevel(pParse); + if( pTop->pTriggerPrg ){ + Trigger *p = pTop->pTriggerPrg->pTrigger; + if( (p==pFKey->apTrigger[0] && pFKey->aAction[0]==OE_SetNull) + || (p==pFKey->apTrigger[1] && pFKey->aAction[1]==OE_SetNull) + ){ + return 1; + } + } + return 0; +} + +/* ** This function is called when inserting, deleting or updating a row of ** table pTab to generate VDBE code to perform foreign key constraint ** processing for the operation. @@ -92939,7 +98025,7 @@ int *aiCol; int iCol; int i; - int isIgnore = 0; + int bIgnore = 0; if( aChange && sqlite3_stricmp(pTab->zName, pFKey->zTo)!=0 @@ -92998,7 +98084,7 @@ int rcauth; char *zCol = pTo->aCol[pIdx ? pIdx->aiColumn[i] : pTo->iPKey].zName; rcauth = sqlite3AuthReadCol(pParse, pTo->zName, zCol, iDb); - isIgnore = (rcauth==SQLITE_IGNORE); + bIgnore = (rcauth==SQLITE_IGNORE); } #endif } @@ -93013,12 +98099,18 @@ /* A row is being removed from the child table. Search for the parent. ** If the parent does not exist, removing the child row resolves an ** outstanding foreign key constraint violation. */ - fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regOld, -1,isIgnore); + fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regOld, -1, bIgnore); } - if( regNew!=0 ){ + if( regNew!=0 && !isSetNullAction(pParse, pFKey) ){ /* A row is being added to the child table. If a parent row cannot - ** be found, adding the child row has violated the FK constraint. */ - fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regNew, +1,isIgnore); + ** be found, adding the child row has violated the FK constraint. + ** + ** If this operation is being performed as part of a trigger program + ** that is actually a "SET NULL" action belonging to this very + ** foreign key, then omit this scan altogether. As all child key + ** values are guaranteed to be NULL, it is not possible for adding + ** this row to cause an FK violation. */ + fkLookupParent(pParse, iDb, pTo, pIdx, pFKey, aiCol, regNew, +1, bIgnore); } sqlite3DbFree(db, aiFree); @@ -93039,8 +98131,8 @@ && !pParse->pToplevel && !pParse->isMultiWrite ){ assert( regOld==0 && regNew!=0 ); - /* Inserting a single row into a parent table cannot cause an immediate - ** foreign key violation. So do nothing in this case. */ + /* Inserting a single row into a parent table cannot cause (or fix) + ** an immediate foreign key violation. So do nothing in this case. */ continue; } @@ -93064,13 +98156,28 @@ fkScanChildren(pParse, pSrc, pTab, pIdx, pFKey, aiCol, regNew, -1); } if( regOld!=0 ){ - /* If there is a RESTRICT action configured for the current operation - ** on the parent table of this FK, then throw an exception - ** immediately if the FK constraint is violated, even if this is a - ** deferred trigger. That's what RESTRICT means. To defer checking - ** the constraint, the FK should specify NO ACTION (represented - ** using OE_None). NO ACTION is the default. */ + int eAction = pFKey->aAction[aChange!=0]; fkScanChildren(pParse, pSrc, pTab, pIdx, pFKey, aiCol, regOld, 1); + /* If this is a deferred FK constraint, or a CASCADE or SET NULL + ** action applies, then any foreign key violations caused by + ** removing the parent key will be rectified by the action trigger. + ** So do not set the "may-abort" flag in this case. + ** + ** Note 1: If the FK is declared "ON UPDATE CASCADE", then the + ** may-abort flag will eventually be set on this statement anyway + ** (when this function is called as part of processing the UPDATE + ** within the action trigger). + ** + ** Note 2: At first glance it may seem like SQLite could simply omit + ** all OP_FkCounter related scans when either CASCADE or SET NULL + ** applies. The trouble starts if the CASCADE or SET NULL action + ** trigger causes other triggers or action rules attached to the + ** child table to fire. In these cases the fk constraint counters + ** might be set incorrectly if any OP_FkCounter related scans are + ** omitted. */ + if( !pFKey->isDeferred && eAction!=OE_Cascade && eAction!=OE_SetNull ){ + sqlite3MayAbort(pParse); + } } pItem->zName = 0; sqlite3SrcListDelete(db, pSrc); @@ -93414,7 +98521,7 @@ }else{ void *p = (void *)pFKey->pNextTo; const char *z = (p ? pFKey->pNextTo->zTo : pFKey->zTo); - sqlite3HashInsert(&pTab->pSchema->fkeyHash, z, sqlite3Strlen30(z), p); + sqlite3HashInsert(&pTab->pSchema->fkeyHash, z, p); } if( pFKey->pNextTo ){ pFKey->pNextTo->pPrevTo = pFKey->pPrevTo; @@ -93497,13 +98604,13 @@ ** ** Character Column affinity ** ------------------------------ -** 'a' TEXT -** 'b' NONE -** 'c' NUMERIC -** 'd' INTEGER -** 'e' REAL +** 'A' NONE +** 'B' TEXT +** 'C' NUMERIC +** 'D' INTEGER +** 'F' REAL ** -** An extra 'd' is appended to the end of the string to cover the +** An extra 'D' is appended to the end of the string to cover the ** rowid that appears as the last column in every index. ** ** Memory for the buffer containing the column index affinity string @@ -93552,11 +98659,11 @@ ** ** Character Column affinity ** ------------------------------ -** 'a' TEXT -** 'b' NONE -** 'c' NUMERIC -** 'd' INTEGER -** 'e' REAL +** 'A' NONE +** 'B' TEXT +** 'C' NUMERIC +** 'D' INTEGER +** 'E' REAL */ SQLITE_PRIVATE void sqlite3TableAffinity(Vdbe *v, Table *pTab, int iReg){ int i; @@ -93851,7 +98958,7 @@ ** The 4th template is used if the insert statement takes its ** values from a SELECT but the data is being inserted into a table ** that is also read as part of the SELECT. In the third form, -** we have to use a intermediate table to store the results of +** we have to use an intermediate table to store the results of ** the select. The template is like this: ** ** X <- A @@ -94016,7 +99123,7 @@ regAutoinc = autoIncBegin(pParse, iDb, pTab); /* Allocate registers for holding the rowid of the new row, - ** the content of the new row, and the assemblied row record. + ** the content of the new row, and the assembled row record. */ regRowid = regIns = pParse->nMem+1; pParse->nMem += pTab->nCol + 1; @@ -94055,6 +99162,7 @@ if( j>=pTab->nCol ){ if( sqlite3IsRowid(pColumn->a[i].zName) && !withoutRowid ){ ipkColumn = i; + bIdListInOrder = 0; }else{ sqlite3ErrorMsg(pParse, "table %S has no column named %s", pTabList, 0, pColumn->a[i].zName); @@ -94467,7 +99575,7 @@ } /* Make sure "isView" and other macros defined above are undefined. Otherwise -** thely may interfere with compilation of other functions in this file +** they may interfere with compilation of other functions in this file ** (or in another file, if this file becomes part of the amalgamation). */ #ifdef isView #undef isView @@ -94583,7 +99691,7 @@ int ix; /* Index loop counter */ int nCol; /* Number of columns */ int onError; /* Conflict resolution strategy */ - int j1; /* Addresss of jump instruction */ + int j1; /* Address of jump instruction */ int seenReplace = 0; /* True if REPLACE is used to resolve INT PK conflict */ int nPkField; /* Number of fields in PRIMARY KEY. 1 for ROWID tables */ int ipkTop = 0; /* Top of the rowid change constraint check */ @@ -94903,7 +100011,7 @@ ** KEY values of this row before the update. */ int addrJump = sqlite3VdbeCurrentAddr(v)+pPk->nKeyCol; int op = OP_Ne; - int regCmp = (pIdx->autoIndex==2 ? regIdx : regR); + int regCmp = (IsPrimaryKeyIndex(pIdx) ? regIdx : regR); for(i=0; inKeyCol; i++){ char *p4 = (char*)sqlite3LocateCollSeq(pParse, pPk->azColl[i]); @@ -94987,7 +100095,7 @@ Index *pIdx; /* An index being inserted or updated */ u8 pik_flags; /* flag values passed to the btree insert */ int regData; /* Content registers (after the rowid) */ - int regRec; /* Register holding assemblied record for the table */ + int regRec; /* Register holding assembled record for the table */ int i; /* Loop counter */ u8 bAffinityDone = 0; /* True if OP_Affinity has been run already */ @@ -95004,7 +100112,7 @@ sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i]); pik_flags = 0; if( useSeekResult ) pik_flags = OPFLAG_USESEEKRESULT; - if( pIdx->autoIndex==2 && !HasRowid(pTab) ){ + if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){ assert( pParse->nested==0 ); pik_flags |= OPFLAG_NCHANGE; } @@ -95052,6 +100160,9 @@ ** For a WITHOUT ROWID table, *piDataCur will be somewhere in the range ** of *piIdxCurs, depending on where the PRIMARY KEY index appears on the ** pTab->pIndex list. +** +** If pTab is a virtual table, then this routine is a no-op and the +** *piDataCur and *piIdxCur values are left uninitialized. */ SQLITE_PRIVATE int sqlite3OpenTableAndIndices( Parse *pParse, /* Parsing context */ @@ -95070,9 +100181,9 @@ assert( op==OP_OpenRead || op==OP_OpenWrite ); if( IsVirtual(pTab) ){ - assert( aToOpen==0 ); - *piDataCur = 0; - *piIdxCur = 1; + /* This routine is a no-op for virtual tables. Leave the output + ** variables *piDataCur and *piIdxCur uninitialized so that valgrind + ** can detect if they are used by mistake in the caller. */ return 0; } iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); @@ -95090,7 +100201,7 @@ for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){ int iIdxCur = iBase++; assert( pIdx->pSchema==pTab->pSchema ); - if( pIdx->autoIndex==2 && !HasRowid(pTab) && piDataCur ){ + if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) && piDataCur ){ *piDataCur = iIdxCur; } if( aToOpen==0 || aToOpen[i+1] ){ @@ -95109,7 +100220,7 @@ ** The following global variable is incremented whenever the ** transfer optimization is used. This is used for testing ** purposes only - to make sure the transfer optimization really -** is happening when it is suppose to. +** is happening when it is supposed to. */ SQLITE_API int sqlite3_xferopt_count; #endif /* SQLITE_TEST */ @@ -95176,7 +100287,7 @@ ** INSERT INTO tab1 SELECT * FROM tab2; ** ** The xfer optimization transfers raw records from tab2 over to tab1. -** Columns are not decoded and reassemblied, which greatly improves +** Columns are not decoded and reassembled, which greatly improves ** performance. Raw index records are transferred in the same way. ** ** The xfer optimization is only attempted if tab1 and tab2 are compatible. @@ -95306,18 +100417,27 @@ return 0; /* Both tables must have the same INTEGER PRIMARY KEY */ } for(i=0; inCol; i++){ - if( pDest->aCol[i].affinity!=pSrc->aCol[i].affinity ){ + Column *pDestCol = &pDest->aCol[i]; + Column *pSrcCol = &pSrc->aCol[i]; + if( pDestCol->affinity!=pSrcCol->affinity ){ return 0; /* Affinity must be the same on all columns */ } - if( !xferCompatibleCollation(pDest->aCol[i].zColl, pSrc->aCol[i].zColl) ){ + if( !xferCompatibleCollation(pDestCol->zColl, pSrcCol->zColl) ){ return 0; /* Collating sequence must be the same on all columns */ } - if( pDest->aCol[i].notNull && !pSrc->aCol[i].notNull ){ + if( pDestCol->notNull && !pSrcCol->notNull ){ return 0; /* tab2 must be NOT NULL if tab1 is */ } + /* Default values for second and subsequent columns need to match. */ + if( i>0 + && ((pDestCol->zDflt==0)!=(pSrcCol->zDflt==0) + || (pDestCol->zDflt && strcmp(pDestCol->zDflt, pSrcCol->zDflt)!=0)) + ){ + return 0; /* Default values must be the same for all columns */ + } } for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){ - if( pDestIdx->onError!=OE_None ){ + if( IsUniqueIndex(pDestIdx) ){ destHasUniqueIdx = 1; } for(pSrcIdx=pSrc->pIndex; pSrcIdx; pSrcIdx=pSrcIdx->pNext){ @@ -95495,7 +100615,7 @@ if( zSql==0 ) zSql = ""; sqlite3_mutex_enter(db->mutex); - sqlite3Error(db, SQLITE_OK, 0); + sqlite3Error(db, SQLITE_OK); while( rc==SQLITE_OK && zSql[0] ){ int nCol; char **azVals = 0; @@ -95547,10 +100667,13 @@ } } if( xCallback(pArg, nCol, azVals, azCols) ){ + /* EVIDENCE-OF: R-38229-40159 If the callback function to + ** sqlite3_exec() returns non-zero, then sqlite3_exec() will + ** return SQLITE_ABORT. */ rc = SQLITE_ABORT; sqlite3VdbeFinalize((Vdbe *)pStmt); pStmt = 0; - sqlite3Error(db, SQLITE_ABORT, 0); + sqlite3Error(db, SQLITE_ABORT); goto exec_out; } } @@ -95573,14 +100696,14 @@ sqlite3DbFree(db, azCols); rc = sqlite3ApiExit(db, rc); - if( rc!=SQLITE_OK && ALWAYS(rc==sqlite3_errcode(db)) && pzErrMsg ){ + if( rc!=SQLITE_OK && pzErrMsg ){ int nErrMsg = 1 + sqlite3Strlen30(sqlite3_errmsg(db)); *pzErrMsg = sqlite3Malloc(nErrMsg); if( *pzErrMsg ){ memcpy(*pzErrMsg, sqlite3_errmsg(db), nErrMsg); }else{ rc = SQLITE_NOMEM; - sqlite3Error(db, SQLITE_NOMEM, 0); + sqlite3Error(db, SQLITE_NOMEM); } }else if( pzErrMsg ){ *pzErrMsg = 0; @@ -95642,7 +100765,7 @@ ** WARNING: In order to maintain backwards compatibility, add new ** interfaces to the end of this structure only. If you insert new ** interfaces in the middle of this structure, then older different -** versions of SQLite will not be able to load each others' shared +** versions of SQLite will not be able to load each other's shared ** libraries! */ struct sqlite3_api_routines { @@ -95864,11 +100987,28 @@ const char *(*uri_parameter)(const char*,const char*); char *(*vsnprintf)(int,char*,const char*,va_list); int (*wal_checkpoint_v2)(sqlite3*,const char*,int,int*,int*); + /* Version 3.8.7 and later */ + int (*auto_extension)(void(*)(void)); + int (*bind_blob64)(sqlite3_stmt*,int,const void*,sqlite3_uint64, + void(*)(void*)); + int (*bind_text64)(sqlite3_stmt*,int,const char*,sqlite3_uint64, + void(*)(void*),unsigned char); + int (*cancel_auto_extension)(void(*)(void)); + int (*load_extension)(sqlite3*,const char*,const char*,char**); + void *(*malloc64)(sqlite3_uint64); + sqlite3_uint64 (*msize)(void*); + void *(*realloc64)(void*,sqlite3_uint64); + void (*reset_auto_extension)(void); + void (*result_blob64)(sqlite3_context*,const void*,sqlite3_uint64, + void(*)(void*)); + void (*result_text64)(sqlite3_context*,const char*,sqlite3_uint64, + void(*)(void*), unsigned char); + int (*strglob)(const char*,const char*); }; /* ** The following macros redefine the API routines so that they are -** redirected throught the global sqlite3_api structure. +** redirected through the global sqlite3_api structure. ** ** This header file is also used by the loadext.c source file ** (part of the main SQLite library - not an extension) so that @@ -96081,6 +101221,19 @@ #define sqlite3_uri_parameter sqlite3_api->uri_parameter #define sqlite3_uri_vsnprintf sqlite3_api->vsnprintf #define sqlite3_wal_checkpoint_v2 sqlite3_api->wal_checkpoint_v2 +/* Version 3.8.7 and later */ +#define sqlite3_auto_extension sqlite3_api->auto_extension +#define sqlite3_bind_blob64 sqlite3_api->bind_blob64 +#define sqlite3_bind_text64 sqlite3_api->bind_text64 +#define sqlite3_cancel_auto_extension sqlite3_api->cancel_auto_extension +#define sqlite3_load_extension sqlite3_api->load_extension +#define sqlite3_malloc64 sqlite3_api->malloc64 +#define sqlite3_msize sqlite3_api->msize +#define sqlite3_realloc64 sqlite3_api->realloc64 +#define sqlite3_reset_auto_extension sqlite3_api->reset_auto_extension +#define sqlite3_result_blob64 sqlite3_api->result_blob64 +#define sqlite3_result_text64 sqlite3_api->result_text64 +#define sqlite3_strglob sqlite3_api->strglob #endif /* SQLITE_CORE */ #ifndef SQLITE_CORE @@ -96118,7 +101271,6 @@ # define sqlite3_column_table_name16 0 # define sqlite3_column_origin_name 0 # define sqlite3_column_origin_name16 0 -# define sqlite3_table_column_metadata 0 #endif #ifdef SQLITE_OMIT_AUTHORIZATION @@ -96474,7 +101626,20 @@ sqlite3_uri_int64, sqlite3_uri_parameter, sqlite3_vsnprintf, - sqlite3_wal_checkpoint_v2 + sqlite3_wal_checkpoint_v2, + /* Version 3.8.7 and later */ + sqlite3_auto_extension, + sqlite3_bind_blob64, + sqlite3_bind_text64, + sqlite3_cancel_auto_extension, + sqlite3_load_extension, + sqlite3_malloc64, + sqlite3_msize, + sqlite3_realloc64, + sqlite3_reset_auto_extension, + sqlite3_result_blob64, + sqlite3_result_text64, + sqlite3_strglob }; /* @@ -96833,7 +101998,7 @@ sqlite3_mutex_leave(mutex); zErrmsg = 0; if( xInit && (rc = xInit(db, &zErrmsg, &sqlite3Apis))!=0 ){ - sqlite3Error(db, rc, + sqlite3ErrorWithMsg(db, rc, "automatic extension loading failed: %s", zErrmsg); go = 0; } @@ -96905,15 +102070,17 @@ #define PragTyp_TABLE_INFO 30 #define PragTyp_TEMP_STORE 31 #define PragTyp_TEMP_STORE_DIRECTORY 32 -#define PragTyp_WAL_AUTOCHECKPOINT 33 -#define PragTyp_WAL_CHECKPOINT 34 -#define PragTyp_ACTIVATE_EXTENSIONS 35 -#define PragTyp_HEXKEY 36 -#define PragTyp_KEY 37 -#define PragTyp_REKEY 38 -#define PragTyp_LOCK_STATUS 39 -#define PragTyp_PARSER_TRACE 40 +#define PragTyp_THREADS 33 +#define PragTyp_WAL_AUTOCHECKPOINT 34 +#define PragTyp_WAL_CHECKPOINT 35 +#define PragTyp_ACTIVATE_EXTENSIONS 36 +#define PragTyp_HEXKEY 37 +#define PragTyp_KEY 38 +#define PragTyp_REKEY 39 +#define PragTyp_LOCK_STATUS 40 +#define PragTyp_PARSER_TRACE 41 #define PragFlag_NeedSchema 0x01 +#define PragFlag_ReadOnly 0x02 static const struct sPragmaNames { const char *const zName; /* Name of pragma */ u8 ePragTyp; /* PragTyp_XXX value */ @@ -96930,7 +102097,7 @@ { /* zName: */ "application_id", /* ePragTyp: */ PragTyp_HEADER_VALUE, /* ePragFlag: */ 0, - /* iArg: */ 0 }, + /* iArg: */ BTREE_APPLICATION_ID }, #endif #if !defined(SQLITE_OMIT_AUTOVACUUM) { /* zName: */ "auto_vacuum", @@ -96996,6 +102163,12 @@ /* ePragFlag: */ 0, /* iArg: */ 0 }, #endif +#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) + { /* zName: */ "data_version", + /* ePragTyp: */ PragTyp_HEADER_VALUE, + /* ePragFlag: */ PragFlag_ReadOnly, + /* iArg: */ BTREE_DATA_VERSION }, +#endif #if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) { /* zName: */ "database_list", /* ePragTyp: */ PragTyp_DATABASE_LIST, @@ -97051,8 +102224,8 @@ #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) { /* zName: */ "freelist_count", /* ePragTyp: */ PragTyp_HEADER_VALUE, - /* ePragFlag: */ 0, - /* iArg: */ 0 }, + /* ePragFlag: */ PragFlag_ReadOnly, + /* iArg: */ BTREE_FREE_PAGE_COUNT }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) { /* zName: */ "full_column_names", @@ -97204,7 +102377,7 @@ { /* zName: */ "schema_version", /* ePragTyp: */ PragTyp_HEADER_VALUE, /* ePragFlag: */ 0, - /* iArg: */ 0 }, + /* iArg: */ BTREE_SCHEMA_VERSION }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) { /* zName: */ "secure_delete", @@ -97262,11 +102435,15 @@ /* ePragFlag: */ 0, /* iArg: */ 0 }, #endif + { /* zName: */ "threads", + /* ePragTyp: */ PragTyp_THREADS, + /* ePragFlag: */ 0, + /* iArg: */ 0 }, #if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS) { /* zName: */ "user_version", /* ePragTyp: */ PragTyp_HEADER_VALUE, /* ePragFlag: */ 0, - /* iArg: */ 0 }, + /* iArg: */ BTREE_USER_VERSION }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if defined(SQLITE_DEBUG) @@ -97309,7 +102486,7 @@ /* iArg: */ SQLITE_WriteSchema|SQLITE_RecoveryMode }, #endif }; -/* Number of pragmas: 56 on by default, 69 total. */ +/* Number of pragmas: 58 on by default, 71 total. */ /* End of the automatically generated pragma table. ***************************************************************************/ @@ -97324,7 +102501,7 @@ ** to support legacy SQL code. The safety level used to be boolean ** and older scripts may have used numbers 0 for OFF and 1 for ON. */ -static u8 getSafetyLevel(const char *z, int omitFull, int dflt){ +static u8 getSafetyLevel(const char *z, int omitFull, u8 dflt){ /* 123456789 123456789 */ static const char zText[] = "onoffalseyestruefull"; static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16}; @@ -97346,7 +102523,7 @@ /* ** Interpret the given string as a boolean value. */ -SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z, int dflt){ +SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z, u8 dflt){ return getSafetyLevel(z,1,dflt)!=0; } @@ -97559,7 +102736,7 @@ Token *pId; /* Pointer to token */ char *aFcntl[4]; /* Argument to SQLITE_FCNTL_PRAGMA */ int iDb; /* Database index for */ - int lwr, upr, mid; /* Binary search bounds */ + int lwr, upr, mid = 0; /* Binary search bounds */ int rc; /* return value form SQLITE_FCNTL_PRAGMA */ sqlite3 *db = pParse->db; /* The database connection */ Db *pDb; /* The specific database being pragmaed */ @@ -97892,7 +103069,7 @@ Pager *pPager = sqlite3BtreePager(pDb->pBt); i64 iLimit = -2; if( zRight ){ - sqlite3Atoi64(zRight, &iLimit, sqlite3Strlen30(zRight), SQLITE_UTF8); + sqlite3DecOrHexToI64(zRight, &iLimit); if( iLimit<-1 ) iLimit = -1; } iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit); @@ -98020,7 +103197,7 @@ assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); if( zRight ){ int ii; - sqlite3Atoi64(zRight, &sz, sqlite3Strlen30(zRight), SQLITE_UTF8); + sqlite3DecOrHexToI64(zRight, &sz); if( sz<0 ) sz = sqlite3GlobalConfig.szMmap; if( pId2->n==0 ) db->szMmap = sz; for(ii=db->nDb-1; ii>=0; ii--){ @@ -98236,6 +103413,12 @@ ** in auto-commit mode. */ mask &= ~(SQLITE_ForeignKeys); } +#if SQLITE_USER_AUTHENTICATION + if( db->auth.authLevel==UAUTH_User ){ + /* Do not allow non-admin users to modify the schema arbitrarily */ + mask &= ~(SQLITE_WriteSchema); + } +#endif if( sqlite3GetBoolean(zRight, 0) ){ db->flags |= mask; @@ -98332,13 +103515,15 @@ sqlite3VdbeAddOp2(v, OP_Null, 0, 2); sqlite3VdbeAddOp2(v, OP_Integer, (int)sqlite3LogEstToInt(pTab->szTabRow), 3); - sqlite3VdbeAddOp2(v, OP_Integer, (int)pTab->nRowEst, 4); + sqlite3VdbeAddOp2(v, OP_Integer, + (int)sqlite3LogEstToInt(pTab->nRowLogEst), 4); sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4); for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0); sqlite3VdbeAddOp2(v, OP_Integer, (int)sqlite3LogEstToInt(pIdx->szIdxRow), 3); - sqlite3VdbeAddOp2(v, OP_Integer, (int)pIdx->aiRowEst[0], 4); + sqlite3VdbeAddOp2(v, OP_Integer, + (int)sqlite3LogEstToInt(pIdx->aiRowLogEst[0]), 4); sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4); } } @@ -98386,7 +103571,7 @@ for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){ sqlite3VdbeAddOp2(v, OP_Integer, i, 1); sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0); - sqlite3VdbeAddOp2(v, OP_Integer, pIdx->onError!=OE_None, 3); + sqlite3VdbeAddOp2(v, OP_Integer, IsUniqueIndex(pIdx), 3); sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); } } @@ -98636,9 +103821,8 @@ */ static const int iLn = VDBE_OFFSET_LINENO(2); static const VdbeOpList endCode[] = { - { OP_AddImm, 1, 0, 0}, /* 0 */ - { OP_IfNeg, 1, 0, 0}, /* 1 */ - { OP_String8, 0, 3, 0}, /* 2 */ + { OP_IfNeg, 1, 0, 0}, /* 0 */ + { OP_String8, 0, 3, 0}, /* 1 */ { OP_ResultRow, 3, 1, 0}, }; @@ -98719,7 +103903,7 @@ sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName), P4_DYNAMIC); - sqlite3VdbeAddOp2(v, OP_Move, 2, 4); + sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1); sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2); sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1); sqlite3VdbeJumpHere(v, addr); @@ -98750,29 +103934,77 @@ pParse->nMem = MAX(pParse->nMem, 8+j); sqlite3VdbeAddOp2(v, OP_Rewind, iDataCur, 0); VdbeCoverage(v); loopTop = sqlite3VdbeAddOp2(v, OP_AddImm, 7, 1); + /* Verify that all NOT NULL columns really are NOT NULL */ + for(j=0; jnCol; j++){ + char *zErr; + int jmp2, jmp3; + if( j==pTab->iPKey ) continue; + if( pTab->aCol[j].notNull==0 ) continue; + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, j, 3); + sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG); + jmp2 = sqlite3VdbeAddOp1(v, OP_NotNull, 3); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ + zErr = sqlite3MPrintf(db, "NULL value in %s.%s", pTab->zName, + pTab->aCol[j].zName); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); + jmp3 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v); + sqlite3VdbeAddOp0(v, OP_Halt); + sqlite3VdbeJumpHere(v, jmp2); + sqlite3VdbeJumpHere(v, jmp3); + } + /* Validate index entries for the current row */ for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ - int jmp2, jmp3, jmp4; + int jmp2, jmp3, jmp4, jmp5; + int ckUniq = sqlite3VdbeMakeLabel(v); if( pPk==pIdx ) continue; r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3, pPrior, r1); pPrior = pIdx; sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1); /* increment entry count */ - jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, 0, r1, + /* Verify that an index entry exists for the current table row */ + jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1, pIdx->nColumn); VdbeCoverage(v); sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, "row ", P4_STATIC); sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3); - sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, " missing from index ", - P4_STATIC); + sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, + " missing from index ", P4_STATIC); sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); - sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, pIdx->zName, P4_TRANSIENT); + jmp5 = sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0, + pIdx->zName, P4_TRANSIENT); sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); jmp4 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v); sqlite3VdbeAddOp0(v, OP_Halt); - sqlite3VdbeJumpHere(v, jmp4); sqlite3VdbeJumpHere(v, jmp2); - sqlite3VdbeResolveLabel(v, jmp3); + /* For UNIQUE indexes, verify that only one entry exists with the + ** current key. The entry is unique if (1) any column is NULL + ** or (2) the next entry has a different key */ + if( IsUniqueIndex(pIdx) ){ + int uniqOk = sqlite3VdbeMakeLabel(v); + int jmp6; + int kk; + for(kk=0; kknKeyCol; kk++){ + int iCol = pIdx->aiColumn[kk]; + assert( iCol>=0 && iColnCol ); + if( pTab->aCol[iCol].notNull ) continue; + sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk); + VdbeCoverage(v); + } + jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, uniqOk); + sqlite3VdbeJumpHere(v, jmp6); + sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1, + pIdx->nKeyCol); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, + "non-unique entry in index ", P4_STATIC); + sqlite3VdbeAddOp2(v, OP_Goto, 0, jmp5); + sqlite3VdbeResolveLabel(v, uniqOk); + } + sqlite3VdbeJumpHere(v, jmp4); + sqlite3ResolvePartIdxLabel(pParse, jmp3); } sqlite3VdbeAddOp2(v, OP_Next, iDataCur, loopTop); VdbeCoverage(v); sqlite3VdbeJumpHere(v, loopTop-1); @@ -98796,9 +104028,9 @@ } } addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode, iLn); - sqlite3VdbeChangeP2(v, addr, -mxErr); - sqlite3VdbeJumpHere(v, addr+1); - sqlite3VdbeChangeP4(v, addr+2, "ok", P4_STATIC); + sqlite3VdbeChangeP3(v, addr, -mxErr); + sqlite3VdbeJumpHere(v, addr); + sqlite3VdbeChangeP4(v, addr+1, "ok", P4_STATIC); } break; #endif /* SQLITE_OMIT_INTEGRITY_CHECK */ @@ -98864,7 +104096,8 @@ ){ for(pEnc=&encnames[0]; pEnc->zName; pEnc++){ if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){ - ENC(pParse->db) = pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE; + SCHEMA_ENC(db) = ENC(db) = + pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE; break; } } @@ -98909,24 +104142,9 @@ ** applications for any purpose. */ case PragTyp_HEADER_VALUE: { - int iCookie; /* Cookie index. 1 for schema-cookie, 6 for user-cookie. */ + int iCookie = aPragmaNames[mid].iArg; /* Which cookie to read or write */ sqlite3VdbeUsesBtree(v, iDb); - switch( zLeft[0] ){ - case 'a': case 'A': - iCookie = BTREE_APPLICATION_ID; - break; - case 'f': case 'F': - iCookie = BTREE_FREE_PAGE_COUNT; - break; - case 's': case 'S': - iCookie = BTREE_SCHEMA_VERSION; - break; - default: - iCookie = BTREE_USER_VERSION; - break; - } - - if( zRight && iCookie!=BTREE_FREE_PAGE_COUNT ){ + if( zRight && (aPragmaNames[mid].mPragFlag & PragFlag_ReadOnly)==0 ){ /* Write the specified cookie value */ static const VdbeOpList setCookie[] = { { OP_Transaction, 0, 1, 0}, /* 0 */ @@ -98979,7 +104197,7 @@ #ifndef SQLITE_OMIT_WAL /* - ** PRAGMA [database.]wal_checkpoint = passive|full|restart + ** PRAGMA [database.]wal_checkpoint = passive|full|restart|truncate ** ** Checkpoint the database. */ @@ -98991,6 +104209,8 @@ eMode = SQLITE_CHECKPOINT_FULL; }else if( sqlite3StrICmp(zRight, "restart")==0 ){ eMode = SQLITE_CHECKPOINT_RESTART; + }else if( sqlite3StrICmp(zRight, "truncate")==0 ){ + eMode = SQLITE_CHECKPOINT_TRUNCATE; } } sqlite3VdbeSetNumCols(v, 3); @@ -99061,13 +104281,33 @@ */ case PragTyp_SOFT_HEAP_LIMIT: { sqlite3_int64 N; - if( zRight && sqlite3Atoi64(zRight, &N, 1000000, SQLITE_UTF8)==SQLITE_OK ){ + if( zRight && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK ){ sqlite3_soft_heap_limit64(N); } returnSingleInt(pParse, "soft_heap_limit", sqlite3_soft_heap_limit64(-1)); break; } + /* + ** PRAGMA threads + ** PRAGMA threads = N + ** + ** Configure the maximum number of worker threads. Return the new + ** maximum, which might be less than requested. + */ + case PragTyp_THREADS: { + sqlite3_int64 N; + if( zRight + && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK + && N>=0 + ){ + sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, (int)(N&0x7fffffff)); + } + returnSingleInt(pParse, "threads", + sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, -1)); + break; + } + #if defined(SQLITE_DEBUG) || defined(SQLITE_TEST) /* ** Report the current state of file logs for all databases @@ -99484,7 +104724,7 @@ db->aDb[iDb].zName, zMasterName); #ifndef SQLITE_OMIT_AUTHORIZATION { - int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); + sqlite3_xauth xAuth; xAuth = db->xAuth; db->xAuth = 0; #endif @@ -99550,8 +104790,11 @@ int commit_internal = !(db->flags&SQLITE_InternChanges); assert( sqlite3_mutex_held(db->mutex) ); + assert( sqlite3BtreeHoldsMutex(db->aDb[0].pBt) ); + assert( db->init.busy==0 ); rc = SQLITE_OK; db->init.busy = 1; + ENC(db) = SCHEMA_ENC(db); for(i=0; rc==SQLITE_OK && inDb; i++){ if( DbHasProperty(db, i, DB_SchemaLoaded) || i==1 ) continue; rc = sqlite3InitOne(db, i, pzErrMsg); @@ -99565,8 +104808,8 @@ ** schema may contain references to objects in other databases. */ #ifndef SQLITE_OMIT_TEMPDB - if( rc==SQLITE_OK && ALWAYS(db->nDb>1) - && !DbHasProperty(db, 1, DB_SchemaLoaded) ){ + assert( db->nDb>1 ); + if( rc==SQLITE_OK && !DbHasProperty(db, 1, DB_SchemaLoaded) ){ rc = sqlite3InitOne(db, 1, pzErrMsg); if( rc ){ sqlite3ResetOneSchema(db, 1); @@ -99749,7 +104992,7 @@ rc = sqlite3BtreeSchemaLocked(pBt); if( rc ){ const char *zDb = db->aDb[i].zName; - sqlite3Error(db, rc, "database schema is locked: %s", zDb); + sqlite3ErrorWithMsg(db, rc, "database schema is locked: %s", zDb); testcase( db->flags & SQLITE_ReadUncommitted ); goto end_prepare; } @@ -99766,7 +105009,7 @@ testcase( nBytes==mxLen ); testcase( nBytes==mxLen+1 ); if( nBytes>mxLen ){ - sqlite3Error(db, SQLITE_TOOBIG, "statement too long"); + sqlite3ErrorWithMsg(db, SQLITE_TOOBIG, "statement too long"); rc = sqlite3ApiExit(db, SQLITE_TOOBIG); goto end_prepare; } @@ -99833,10 +105076,10 @@ } if( zErrMsg ){ - sqlite3Error(db, rc, "%s", zErrMsg); + sqlite3ErrorWithMsg(db, rc, "%s", zErrMsg); sqlite3DbFree(db, zErrMsg); }else{ - sqlite3Error(db, rc, 0); + sqlite3Error(db, rc); } /* Delete any TriggerPrg structures allocated while parsing this statement. */ @@ -99864,9 +105107,12 @@ const char **pzTail /* OUT: End of parsed string */ ){ int rc; - assert( ppStmt!=0 ); + +#ifdef SQLITE_ENABLE_API_ARMOR + if( ppStmt==0 ) return SQLITE_MISUSE_BKPT; +#endif *ppStmt = 0; - if( !sqlite3SafetyCheckOk(db) ){ + if( !sqlite3SafetyCheckOk(db)||zSql==0 ){ return SQLITE_MISUSE_BKPT; } sqlite3_mutex_enter(db->mutex); @@ -99973,9 +105219,11 @@ const char *zTail8 = 0; int rc = SQLITE_OK; - assert( ppStmt ); +#ifdef SQLITE_ENABLE_API_ARMOR + if( ppStmt==0 ) return SQLITE_MISUSE_BKPT; +#endif *ppStmt = 0; - if( !sqlite3SafetyCheckOk(db) ){ + if( !sqlite3SafetyCheckOk(db)||zSql==0 ){ return SQLITE_MISUSE_BKPT; } if( nBytes>=0 ){ @@ -100057,22 +105305,69 @@ ** to handle SELECT statements in SQLite. */ +/* +** Trace output macros +*/ +#if SELECTTRACE_ENABLED +/***/ int sqlite3SelectTrace = 0; +# define SELECTTRACE(K,P,S,X) \ + if(sqlite3SelectTrace&(K)) \ + sqlite3DebugPrintf("%*s%s.%p: ",(P)->nSelectIndent*2-2,"",(S)->zSelName,(S)),\ + sqlite3DebugPrintf X +#else +# define SELECTTRACE(K,P,S,X) +#endif + /* -** Delete all the content of a Select structure but do not deallocate -** the select structure itself. +** An instance of the following object is used to record information about +** how to process the DISTINCT keyword, to simplify passing that information +** into the selectInnerLoop() routine. */ -static void clearSelect(sqlite3 *db, Select *p){ - sqlite3ExprListDelete(db, p->pEList); - sqlite3SrcListDelete(db, p->pSrc); - sqlite3ExprDelete(db, p->pWhere); - sqlite3ExprListDelete(db, p->pGroupBy); - sqlite3ExprDelete(db, p->pHaving); - sqlite3ExprListDelete(db, p->pOrderBy); - sqlite3SelectDelete(db, p->pPrior); - sqlite3ExprDelete(db, p->pLimit); - sqlite3ExprDelete(db, p->pOffset); - sqlite3WithDelete(db, p->pWith); +typedef struct DistinctCtx DistinctCtx; +struct DistinctCtx { + u8 isTnct; /* True if the DISTINCT keyword is present */ + u8 eTnctType; /* One of the WHERE_DISTINCT_* operators */ + int tabTnct; /* Ephemeral table used for DISTINCT processing */ + int addrTnct; /* Address of OP_OpenEphemeral opcode for tabTnct */ +}; + +/* +** An instance of the following object is used to record information about +** the ORDER BY (or GROUP BY) clause of query is being coded. +*/ +typedef struct SortCtx SortCtx; +struct SortCtx { + ExprList *pOrderBy; /* The ORDER BY (or GROUP BY clause) */ + int nOBSat; /* Number of ORDER BY terms satisfied by indices */ + int iECursor; /* Cursor number for the sorter */ + int regReturn; /* Register holding block-output return address */ + int labelBkOut; /* Start label for the block-output subroutine */ + int addrSortIndex; /* Address of the OP_SorterOpen or OP_OpenEphemeral */ + u8 sortFlags; /* Zero or more SORTFLAG_* bits */ +}; +#define SORTFLAG_UseSorter 0x01 /* Use SorterOpen instead of OpenEphemeral */ + +/* +** Delete all the content of a Select structure. Deallocate the structure +** itself only if bFree is true. +*/ +static void clearSelect(sqlite3 *db, Select *p, int bFree){ + while( p ){ + Select *pPrior = p->pPrior; + sqlite3ExprListDelete(db, p->pEList); + sqlite3SrcListDelete(db, p->pSrc); + sqlite3ExprDelete(db, p->pWhere); + sqlite3ExprListDelete(db, p->pGroupBy); + sqlite3ExprDelete(db, p->pHaving); + sqlite3ExprListDelete(db, p->pOrderBy); + sqlite3ExprDelete(db, p->pLimit); + sqlite3ExprDelete(db, p->pOffset); + sqlite3WithDelete(db, p->pWith); + if( bFree ) sqlite3DbFree(db, p); + p = pPrior; + bFree = 1; + } } /* @@ -100130,10 +105425,8 @@ assert( pOffset==0 || pLimit!=0 ); pNew->addrOpenEphm[0] = -1; pNew->addrOpenEphm[1] = -1; - pNew->addrOpenEphm[2] = -1; if( db->mallocFailed ) { - clearSelect(db, pNew); - if( pNew!=&standin ) sqlite3DbFree(db, pNew); + clearSelect(db, pNew, pNew!=&standin); pNew = 0; }else{ assert( pNew->pSrc!=0 || pParse->nErr>0 ); @@ -100142,14 +105435,23 @@ return pNew; } +#if SELECTTRACE_ENABLED /* +** Set the name of a Select object +*/ +SQLITE_PRIVATE void sqlite3SelectSetName(Select *p, const char *zName){ + if( p && zName ){ + sqlite3_snprintf(sizeof(p->zSelName), p->zSelName, "%s", zName); + } +} +#endif + + +/* ** Delete the given Select structure and all of its substructures. */ SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){ - if( p ){ - clearSelect(db, p); - sqlite3DbFree(db, p); - } + clearSelect(db, p, 1); } /* @@ -100462,34 +105764,95 @@ return 0; } +/* Forward reference */ +static KeyInfo *keyInfoFromExprList( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* Form the KeyInfo object from this ExprList */ + int iStart, /* Begin with this column of pList */ + int nExtra /* Add this many extra columns to the end */ +); + /* -** Insert code into "v" that will push the record on the top of the -** stack into the sorter. +** Generate code that will push the record in registers regData +** through regData+nData-1 onto the sorter. */ static void pushOntoSorter( Parse *pParse, /* Parser context */ - ExprList *pOrderBy, /* The ORDER BY clause */ + SortCtx *pSort, /* Information about the ORDER BY clause */ Select *pSelect, /* The whole SELECT statement */ - int regData /* Register holding data to be sorted */ + int regData, /* First register holding data to be sorted */ + int nData, /* Number of elements in the data array */ + int nPrefixReg /* No. of reg prior to regData available for use */ ){ - Vdbe *v = pParse->pVdbe; - int nExpr = pOrderBy->nExpr; - int regBase = sqlite3GetTempRange(pParse, nExpr+2); - int regRecord = sqlite3GetTempReg(pParse); - int op; - sqlite3ExprCacheClear(pParse); - sqlite3ExprCodeExprList(pParse, pOrderBy, regBase, 0); - sqlite3VdbeAddOp2(v, OP_Sequence, pOrderBy->iECursor, regBase+nExpr); - sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+1, 1); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nExpr + 2, regRecord); - if( pSelect->selFlags & SF_UseSorter ){ + Vdbe *v = pParse->pVdbe; /* Stmt under construction */ + int bSeq = ((pSort->sortFlags & SORTFLAG_UseSorter)==0); + int nExpr = pSort->pOrderBy->nExpr; /* No. of ORDER BY terms */ + int nBase = nExpr + bSeq + nData; /* Fields in sorter record */ + int regBase; /* Regs for sorter record */ + int regRecord = ++pParse->nMem; /* Assembled sorter record */ + int nOBSat = pSort->nOBSat; /* ORDER BY terms to skip */ + int op; /* Opcode to add sorter record to sorter */ + + assert( bSeq==0 || bSeq==1 ); + if( nPrefixReg ){ + assert( nPrefixReg==nExpr+bSeq ); + regBase = regData - nExpr - bSeq; + }else{ + regBase = pParse->nMem + 1; + pParse->nMem += nBase; + } + sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, SQLITE_ECEL_DUP); + if( bSeq ){ + sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr); + } + if( nPrefixReg==0 ){ + sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData); + } + + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord); + if( nOBSat>0 ){ + int regPrevKey; /* The first nOBSat columns of the previous row */ + int addrFirst; /* Address of the OP_IfNot opcode */ + int addrJmp; /* Address of the OP_Jump opcode */ + VdbeOp *pOp; /* Opcode that opens the sorter */ + int nKey; /* Number of sorting key columns, including OP_Sequence */ + KeyInfo *pKI; /* Original KeyInfo on the sorter table */ + + regPrevKey = pParse->nMem+1; + pParse->nMem += pSort->nOBSat; + nKey = nExpr - pSort->nOBSat + bSeq; + if( bSeq ){ + addrFirst = sqlite3VdbeAddOp1(v, OP_IfNot, regBase+nExpr); + }else{ + addrFirst = sqlite3VdbeAddOp1(v, OP_SequenceTest, pSort->iECursor); + } + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Compare, regPrevKey, regBase, pSort->nOBSat); + pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex); + if( pParse->db->mallocFailed ) return; + pOp->p2 = nKey + nData; + pKI = pOp->p4.pKeyInfo; + memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */ + sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO); + testcase( pKI->nXField>2 ); + pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat, + pKI->nXField-1); + addrJmp = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v); + pSort->labelBkOut = sqlite3VdbeMakeLabel(v); + pSort->regReturn = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut); + sqlite3VdbeAddOp1(v, OP_ResetSorter, pSort->iECursor); + sqlite3VdbeJumpHere(v, addrFirst); + sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat); + sqlite3VdbeJumpHere(v, addrJmp); + } + if( pSort->sortFlags & SORTFLAG_UseSorter ){ op = OP_SorterInsert; }else{ op = OP_IdxInsert; } - sqlite3VdbeAddOp2(v, op, pOrderBy->iECursor, regRecord); - sqlite3ReleaseTempReg(pParse, regRecord); - sqlite3ReleaseTempRange(pParse, regBase, nExpr+2); + sqlite3VdbeAddOp2(v, op, pSort->iECursor, regRecord); if( pSelect->iLimit ){ int addr1, addr2; int iLimit; @@ -100502,8 +105865,8 @@ sqlite3VdbeAddOp2(v, OP_AddImm, iLimit, -1); addr2 = sqlite3VdbeAddOp0(v, OP_Goto); sqlite3VdbeJumpHere(v, addr1); - sqlite3VdbeAddOp1(v, OP_Last, pOrderBy->iECursor); - sqlite3VdbeAddOp1(v, OP_Delete, pOrderBy->iECursor); + sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor); + sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor); sqlite3VdbeJumpHere(v, addr2); } } @@ -100516,10 +105879,9 @@ int iOffset, /* Register holding the offset counter */ int iContinue /* Jump here to skip the current record */ ){ - if( iOffset>0 && iContinue!=0 ){ + if( iOffset>0 ){ int addr; - sqlite3VdbeAddOp2(v, OP_AddImm, iOffset, -1); - addr = sqlite3VdbeAddOp1(v, OP_IfNeg, iOffset); VdbeCoverage(v); + addr = sqlite3VdbeAddOp3(v, OP_IfNeg, iOffset, 0, -1); VdbeCoverage(v); sqlite3VdbeAddOp2(v, OP_Goto, 0, iContinue); VdbeComment((v, "skip OFFSET records")); sqlite3VdbeJumpHere(v, addr); @@ -100578,19 +105940,6 @@ #endif /* -** An instance of the following object is used to record information about -** how to process the DISTINCT keyword, to simplify passing that information -** into the selectInnerLoop() routine. -*/ -typedef struct DistinctCtx DistinctCtx; -struct DistinctCtx { - u8 isTnct; /* True if the DISTINCT keyword is present */ - u8 eTnctType; /* One of the WHERE_DISTINCT_* operators */ - int tabTnct; /* Ephemeral table used for DISTINCT processing */ - int addrTnct; /* Address of OP_OpenEphemeral opcode for tabTnct */ -}; - -/* ** This routine generates the code for the inside of the inner loop ** of a SELECT. ** @@ -100604,7 +105953,7 @@ Select *p, /* The complete select statement being coded */ ExprList *pEList, /* List of values being extracted */ int srcTab, /* Pull data from this table */ - ExprList *pOrderBy, /* If not NULL, sort results using this key */ + SortCtx *pSort, /* If not NULL, info on how to process ORDER BY */ DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */ SelectDest *pDest, /* How to dispose of the results */ int iContinue, /* Jump here to continue with next row */ @@ -100617,11 +105966,14 @@ int eDest = pDest->eDest; /* How to dispose of results */ int iParm = pDest->iSDParm; /* First argument to disposal method */ int nResultCol; /* Number of result columns */ + int nPrefixReg = 0; /* Number of extra registers before regResult */ assert( v ); assert( pEList!=0 ); hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP; - if( pOrderBy==0 && !hasDistinct ){ + if( pSort && pSort->pOrderBy==0 ) pSort = 0; + if( pSort==0 && !hasDistinct ){ + assert( iContinue!=0 ); codeOffset(v, p->iOffset, iContinue); } @@ -100630,6 +105982,11 @@ nResultCol = pEList->nExpr; if( pDest->iSdst==0 ){ + if( pSort ){ + nPrefixReg = pSort->pOrderBy->nExpr; + if( !(pSort->sortFlags & SORTFLAG_UseSorter) ) nPrefixReg++; + pParse->nMem += nPrefixReg; + } pDest->iSdst = pParse->nMem+1; pParse->nMem += nResultCol; }else if( pDest->iSdst+nResultCol > pParse->nMem ){ @@ -100695,7 +106052,7 @@ sqlite3VdbeChangeP4(v, -1, (const char *)pColl, P4_COLLSEQ); sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); } - assert( sqlite3VdbeCurrentAddr(v)==iJump ); + assert( sqlite3VdbeCurrentAddr(v)==iJump || pParse->db->mallocFailed ); sqlite3VdbeAddOp3(v, OP_Copy, regResult, regPrev, nResultCol-1); break; } @@ -100711,7 +106068,7 @@ break; } } - if( pOrderBy==0 ){ + if( pSort==0 ){ codeOffset(v, p->iOffset, iContinue); } } @@ -100742,36 +106099,37 @@ /* Store the result as data using a unique key. */ - case SRT_DistTable: + case SRT_Fifo: + case SRT_DistFifo: case SRT_Table: case SRT_EphemTab: { - int r1 = sqlite3GetTempReg(pParse); + int r1 = sqlite3GetTempRange(pParse, nPrefixReg+1); testcase( eDest==SRT_Table ); testcase( eDest==SRT_EphemTab ); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1); + sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1+nPrefixReg); #ifndef SQLITE_OMIT_CTE - if( eDest==SRT_DistTable ){ - /* If the destination is DistTable, then cursor (iParm+1) is open + if( eDest==SRT_DistFifo ){ + /* If the destination is DistFifo, then cursor (iParm+1) is open ** on an ephemeral index. If the current row is already present ** in the index, do not write it to the output. If not, add the ** current row to the index and proceed with writing it to the ** output table as well. */ int addr = sqlite3VdbeCurrentAddr(v) + 4; sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0); VdbeCoverage(v); sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r1); - assert( pOrderBy==0 ); + assert( pSort==0 ); } #endif - if( pOrderBy ){ - pushOntoSorter(pParse, pOrderBy, p, r1); + if( pSort ){ + pushOntoSorter(pParse, pSort, p, r1+nPrefixReg, 1, nPrefixReg); }else{ int r2 = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2); sqlite3VdbeAddOp3(v, OP_Insert, iParm, r1, r2); sqlite3VdbeChangeP5(v, OPFLAG_APPEND); sqlite3ReleaseTempReg(pParse, r2); } - sqlite3ReleaseTempReg(pParse, r1); + sqlite3ReleaseTempRange(pParse, r1, nPrefixReg+1); break; } @@ -100784,12 +106142,12 @@ assert( nResultCol==1 ); pDest->affSdst = sqlite3CompareAffinity(pEList->a[0].pExpr, pDest->affSdst); - if( pOrderBy ){ + if( pSort ){ /* At first glance you would think we could optimize out the ** ORDER BY in this case since the order of entries in the set ** does not matter. But there might be a LIMIT clause, in which ** case the order does matter */ - pushOntoSorter(pParse, pOrderBy, p, regResult); + pushOntoSorter(pParse, pSort, p, regResult, 1, nPrefixReg); }else{ int r1 = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult,1,r1, &pDest->affSdst, 1); @@ -100814,10 +106172,10 @@ */ case SRT_Mem: { assert( nResultCol==1 ); - if( pOrderBy ){ - pushOntoSorter(pParse, pOrderBy, p, regResult); + if( pSort ){ + pushOntoSorter(pParse, pSort, p, regResult, 1, nPrefixReg); }else{ - sqlite3ExprCodeMove(pParse, regResult, iParm, 1); + assert( regResult==iParm ); /* The LIMIT clause will jump out of the loop for us */ } break; @@ -100828,11 +106186,8 @@ case SRT_Output: { /* Return the results */ testcase( eDest==SRT_Coroutine ); testcase( eDest==SRT_Output ); - if( pOrderBy ){ - int r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1); - pushOntoSorter(pParse, pOrderBy, p, r1); - sqlite3ReleaseTempReg(pParse, r1); + if( pSort ){ + pushOntoSorter(pParse, pSort, p, regResult, nResultCol, nPrefixReg); }else if( eDest==SRT_Coroutine ){ sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); }else{ @@ -100908,7 +106263,7 @@ ** there is a sorter, in which case the sorter has already limited ** the output for us. */ - if( pOrderBy==0 && p->iLimit ){ + if( pSort==0 && p->iLimit ){ sqlite3VdbeAddOp3(v, OP_IfZero, p->iLimit, iBreak, -1); VdbeCoverage(v); } } @@ -100975,27 +106330,32 @@ ** then the KeyInfo structure is appropriate for initializing a virtual ** index to implement a DISTINCT test. ** -** Space to hold the KeyInfo structure is obtain from malloc. The calling +** Space to hold the KeyInfo structure is obtained from malloc. The calling ** function is responsible for seeing that this structure is eventually ** freed. */ -static KeyInfo *keyInfoFromExprList(Parse *pParse, ExprList *pList, int nExtra){ +static KeyInfo *keyInfoFromExprList( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* Form the KeyInfo object from this ExprList */ + int iStart, /* Begin with this column of pList */ + int nExtra /* Add this many extra columns to the end */ +){ int nExpr; KeyInfo *pInfo; struct ExprList_item *pItem; sqlite3 *db = pParse->db; int i; nExpr = pList->nExpr; - pInfo = sqlite3KeyInfoAlloc(db, nExpr+nExtra, 1); + pInfo = sqlite3KeyInfoAlloc(db, nExpr-iStart, nExtra+1); if( pInfo ){ assert( sqlite3KeyInfoIsWriteable(pInfo) ); - for(i=0, pItem=pList->a; ia+iStart; ipExpr); if( !pColl ) pColl = db->pDfltColl; - pInfo->aColl[i] = pColl; - pInfo->aSortOrder[i] = pItem->sortOrder; + pInfo->aColl[i-iStart] = pColl; + pInfo->aSortOrder[i-iStart] = pItem->sortOrder; } } return pInfo; @@ -101097,47 +106457,69 @@ static void generateSortTail( Parse *pParse, /* Parsing context */ Select *p, /* The SELECT statement */ - Vdbe *v, /* Generate code into this VDBE */ + SortCtx *pSort, /* Information on the ORDER BY clause */ int nColumn, /* Number of columns of data */ SelectDest *pDest /* Write the sorted results here */ ){ + Vdbe *v = pParse->pVdbe; /* The prepared statement */ int addrBreak = sqlite3VdbeMakeLabel(v); /* Jump here to exit loop */ int addrContinue = sqlite3VdbeMakeLabel(v); /* Jump here for next cycle */ int addr; + int addrOnce = 0; int iTab; - int pseudoTab = 0; - ExprList *pOrderBy = p->pOrderBy; - + ExprList *pOrderBy = pSort->pOrderBy; int eDest = pDest->eDest; int iParm = pDest->iSDParm; - int regRow; int regRowid; + int nKey; + int iSortTab; /* Sorter cursor to read from */ + int nSortData; /* Trailing values to read from sorter */ + int i; + int bSeq; /* True if sorter record includes seq. no. */ +#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS + struct ExprList_item *aOutEx = p->pEList->a; +#endif - iTab = pOrderBy->iECursor; - regRow = sqlite3GetTempReg(pParse); + if( pSort->labelBkOut ){ + sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut); + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrBreak); + sqlite3VdbeResolveLabel(v, pSort->labelBkOut); + } + iTab = pSort->iECursor; if( eDest==SRT_Output || eDest==SRT_Coroutine ){ - pseudoTab = pParse->nTab++; - sqlite3VdbeAddOp3(v, OP_OpenPseudo, pseudoTab, regRow, nColumn); regRowid = 0; + regRow = pDest->iSdst; + nSortData = nColumn; }else{ regRowid = sqlite3GetTempReg(pParse); + regRow = sqlite3GetTempReg(pParse); + nSortData = 1; } - if( p->selFlags & SF_UseSorter ){ + nKey = pOrderBy->nExpr - pSort->nOBSat; + if( pSort->sortFlags & SORTFLAG_UseSorter ){ int regSortOut = ++pParse->nMem; - int ptab2 = pParse->nTab++; - sqlite3VdbeAddOp3(v, OP_OpenPseudo, ptab2, regSortOut, pOrderBy->nExpr+2); + iSortTab = pParse->nTab++; + if( pSort->labelBkOut ){ + addrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v); + } + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData); + if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak); VdbeCoverage(v); codeOffset(v, p->iOffset, addrContinue); - sqlite3VdbeAddOp2(v, OP_SorterData, iTab, regSortOut); - sqlite3VdbeAddOp3(v, OP_Column, ptab2, pOrderBy->nExpr+1, regRow); - sqlite3VdbeChangeP5(v, OPFLAG_CLEARCACHE); + sqlite3VdbeAddOp3(v, OP_SorterData, iTab, regSortOut, iSortTab); + bSeq = 0; }else{ addr = 1 + sqlite3VdbeAddOp2(v, OP_Sort, iTab, addrBreak); VdbeCoverage(v); codeOffset(v, p->iOffset, addrContinue); - sqlite3VdbeAddOp3(v, OP_Column, iTab, pOrderBy->nExpr+1, regRow); + iSortTab = iTab; + bSeq = 1; } + for(i=0; iiSdst+i ); - sqlite3VdbeAddOp3(v, OP_Column, pseudoTab, i, pDest->iSdst+i); - if( i==0 ){ - sqlite3VdbeChangeP5(v, OPFLAG_CLEARCACHE); - } - } if( eDest==SRT_Output ){ sqlite3VdbeAddOp2(v, OP_ResultRow, pDest->iSdst, nColumn); sqlite3ExprCacheAffinityChange(pParse, pDest->iSdst, nColumn); @@ -101185,21 +106559,20 @@ break; } } - sqlite3ReleaseTempReg(pParse, regRow); - sqlite3ReleaseTempReg(pParse, regRowid); - + if( regRowid ){ + sqlite3ReleaseTempReg(pParse, regRow); + sqlite3ReleaseTempReg(pParse, regRowid); + } /* The bottom of the loop */ sqlite3VdbeResolveLabel(v, addrContinue); - if( p->selFlags & SF_UseSorter ){ + if( pSort->sortFlags & SORTFLAG_UseSorter ){ sqlite3VdbeAddOp2(v, OP_SorterNext, iTab, addr); VdbeCoverage(v); }else{ sqlite3VdbeAddOp2(v, OP_Next, iTab, addr); VdbeCoverage(v); } + if( pSort->regReturn ) sqlite3VdbeAddOp1(v, OP_Return, pSort->regReturn); sqlite3VdbeResolveLabel(v, addrBreak); - if( eDest==SRT_Output || eDest==SRT_Coroutine ){ - sqlite3VdbeAddOp2(v, OP_Close, pseudoTab, 0); - } } /* @@ -101484,7 +106857,7 @@ } /* -** Given a an expression list (which is really the list of expressions +** Given an expression list (which is really the list of expressions ** that form the result set of a SELECT statement) compute appropriate ** column names for a table that would hold the expression list. ** @@ -101557,7 +106930,7 @@ } /* Make sure the column name is unique. If the name is not unique, - ** append a integer to the name so that it becomes unique. + ** append an integer to the name so that it becomes unique. */ nName = sqlite3Strlen30(zName); for(j=cnt=0; jlookaside.bEnabled==0 ); pTab->nRef = 1; pTab->zName = 0; - pTab->nRowEst = 1048576; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); selectColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol); selectAddColumnTypeAndCollation(pParse, pTab, pSelect); pTab->iPKey = -1; @@ -101877,7 +107250,7 @@ int regCurrent; /* Register holding Current table */ int iQueue; /* The Queue table */ int iDistinct = 0; /* To ensure unique results if UNION */ - int eDest = SRT_Table; /* How to write to Queue */ + int eDest = SRT_Fifo; /* How to write to Queue */ SelectDest destQueue; /* SelectDest targetting the Queue table */ int i; /* Loop counter */ int rc; /* Result code */ @@ -101909,13 +107282,13 @@ /* Allocate cursors numbers for Queue and Distinct. The cursor number for ** the Distinct table must be exactly one greater than Queue in order - ** for the SRT_DistTable and SRT_DistQueue destinations to work. */ + ** for the SRT_DistFifo and SRT_DistQueue destinations to work. */ iQueue = pParse->nTab++; if( p->op==TK_UNION ){ - eDest = pOrderBy ? SRT_DistQueue : SRT_DistTable; + eDest = pOrderBy ? SRT_DistQueue : SRT_DistFifo; iDistinct = pParse->nTab++; }else{ - eDest = pOrderBy ? SRT_Queue : SRT_Table; + eDest = pOrderBy ? SRT_Queue : SRT_Fifo; } sqlite3SelectDestInit(&destQueue, eDest, iQueue); @@ -101981,6 +107354,7 @@ sqlite3VdbeResolveLabel(v, addrBreak); end_of_recursive_query: + sqlite3ExprListDelete(pParse->db, p->pOrderBy); p->pOrderBy = pOrderBy; p->pLimit = pLimit; p->pOffset = pOffset; @@ -101995,8 +107369,68 @@ SelectDest *pDest /* What to do with query results */ ); +/* +** Error message for when two or more terms of a compound select have different +** size result sets. +*/ +static void selectWrongNumTermsError(Parse *pParse, Select *p){ + if( p->selFlags & SF_Values ){ + sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms"); + }else{ + sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s" + " do not have the same number of result columns", selectOpName(p->op)); + } +} /* +** Handle the special case of a compound-select that originates from a +** VALUES clause. By handling this as a special case, we avoid deep +** recursion, and thus do not need to enforce the SQLITE_LIMIT_COMPOUND_SELECT +** on a VALUES clause. +** +** Because the Select object originates from a VALUES clause: +** (1) It has no LIMIT or OFFSET +** (2) All terms are UNION ALL +** (3) There is no ORDER BY clause +*/ +static int multiSelectValues( + Parse *pParse, /* Parsing context */ + Select *p, /* The right-most of SELECTs to be coded */ + SelectDest *pDest /* What to do with query results */ +){ + Select *pPrior; + int nExpr = p->pEList->nExpr; + int nRow = 1; + int rc = 0; + assert( p->pNext==0 ); + assert( p->selFlags & SF_AllValues ); + do{ + assert( p->selFlags & SF_Values ); + assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) ); + assert( p->pLimit==0 ); + assert( p->pOffset==0 ); + if( p->pEList->nExpr!=nExpr ){ + selectWrongNumTermsError(pParse, p); + return 1; + } + if( p->pPrior==0 ) break; + assert( p->pPrior->pNext==p ); + p = p->pPrior; + nRow++; + }while(1); + while( p ){ + pPrior = p->pPrior; + p->pPrior = 0; + rc = sqlite3Select(pParse, p, pDest); + p->pPrior = pPrior; + if( rc ) break; + p->nSelectRow = nRow; + p = p->pNext; + } + return rc; +} + +/* ** This routine is called to process a compound query form from ** two or more separate queries using UNION, UNION ALL, EXCEPT, or ** INTERSECT @@ -102076,17 +107510,19 @@ dest.eDest = SRT_Table; } + /* Special handling for a compound-select that originates as a VALUES clause. + */ + if( p->selFlags & SF_AllValues ){ + rc = multiSelectValues(pParse, p, &dest); + goto multi_select_end; + } + /* Make sure all SELECTs in the statement have the same number of elements ** in their result sets. */ assert( p->pEList && pPrior->pEList ); if( p->pEList->nExpr!=pPrior->pEList->nExpr ){ - if( p->selFlags & SF_Values ){ - sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms"); - }else{ - sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s" - " do not have the same number of result columns", selectOpName(p->op)); - } + selectWrongNumTermsError(pParse, p); rc = 1; goto multi_select_end; } @@ -103040,7 +108476,7 @@ ** ** SELECT x+y AS a FROM t1 WHERE z<100 AND a>5 ** -** The code generated for this simpification gives the same result +** The code generated for this simplification gives the same result ** but only has to scan the data once. And because indices might ** exist on the table t1, a complete scan of the data might be ** avoided. @@ -103073,8 +108509,10 @@ ** (9) The subquery does not use LIMIT or the outer query does not use ** aggregates. ** -** (10) The subquery does not use aggregates or the outer query does not -** use LIMIT. +** (**) Restriction (10) was removed from the code on 2005-02-05 but we +** accidently carried the comment forward until 2014-09-15. Original +** text: "The subquery does not use aggregates or the outer query does not +** use LIMIT." ** ** (11) The subquery and the outer query do not both have ORDER BY clauses. ** @@ -103137,7 +108575,12 @@ ** parent to a compound query confuses the code that handles ** recursive queries in multiSelect(). ** +** (24) The subquery is not an aggregate that uses the built-in min() or +** or max() functions. (Without this restriction, a query like: +** "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily +** return the value X for which Y was maximal.) ** +** ** In this routine, the "p" parameter is a pointer to the outer query. ** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query ** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates. @@ -103184,7 +108627,7 @@ pSubSrc = pSub->pSrc; assert( pSubSrc ); /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants, - ** not arbitrary expresssions, we allowed some combining of LIMIT and OFFSET + ** not arbitrary expressions, we allowed some combining of LIMIT and OFFSET ** because they could be computed at compile-time. But when LIMIT and OFFSET ** became arbitrary expressions, we were forced to add restrictions (13) ** and (14). */ @@ -103209,8 +108652,14 @@ if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){ return 0; /* Restriction (21) */ } - if( pSub->selFlags & SF_Recursive ) return 0; /* Restriction (22) */ - if( (p->selFlags & SF_Recursive) && pSub->pPrior ) return 0; /* (23) */ + testcase( pSub->selFlags & SF_Recursive ); + testcase( pSub->selFlags & SF_MinMaxAgg ); + if( pSub->selFlags & (SF_Recursive|SF_MinMaxAgg) ){ + return 0; /* Restrictions (22) and (24) */ + } + if( (p->selFlags & SF_Recursive) && pSub->pPrior ){ + return 0; /* Restriction (23) */ + } /* OBSOLETE COMMENT 1: ** Restriction 3: If the subquery is a join, make sure the subquery is @@ -103284,6 +108733,8 @@ } /***** If we reach this point, flattening is permitted. *****/ + SELECTTRACE(1,pParse,p,("flatten %s.%p from term %d\n", + pSub->zSelName, pSub, iFrom)); /* Authorize the subquery */ pParse->zAuthContext = pSubitem->zName; @@ -103336,6 +108787,7 @@ p->pLimit = 0; p->pOffset = 0; pNew = sqlite3SelectDup(db, p, 0); + sqlite3SelectSetName(pNew, pSub->zSelName); p->pOffset = pOffset; p->pLimit = pLimit; p->pOrderBy = pOrderBy; @@ -103348,6 +108800,9 @@ if( pPrior ) pPrior->pNext = pNew; pNew->pNext = p; p->pPrior = pNew; + SELECTTRACE(2,pParse,p, + ("compound-subquery flattener creates %s.%p as peer\n", + pNew->zSelName, pNew)); } if( db->mallocFailed ) return 1; } @@ -103477,8 +108932,23 @@ pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList); } if( pSub->pOrderBy ){ + /* At this point, any non-zero iOrderByCol values indicate that the + ** ORDER BY column expression is identical to the iOrderByCol'th + ** expression returned by SELECT statement pSub. Since these values + ** do not necessarily correspond to columns in SELECT statement pParent, + ** zero them before transfering the ORDER BY clause. + ** + ** Not doing this may cause an error if a subsequent call to this + ** function attempts to flatten a compound sub-query into pParent + ** (the only way this can happen is if the compound sub-query is + ** currently part of pSub->pSrc). See ticket [d11a6e908f]. */ + ExprList *pOrderBy = pSub->pOrderBy; + for(i=0; inExpr; i++){ + pOrderBy->a[i].u.x.iOrderByCol = 0; + } assert( pParent->pOrderBy==0 ); - pParent->pOrderBy = pSub->pOrderBy; + assert( pSub->pPrior==0 ); + pParent->pOrderBy = pOrderBy; pSub->pOrderBy = 0; }else if( pParent->pOrderBy ){ substExprList(db, pParent->pOrderBy, iParent, pSub->pEList); @@ -103524,6 +108994,13 @@ */ sqlite3SelectDelete(db, pSub1); +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x100 ){ + sqlite3DebugPrintf("After flattening:\n"); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + return 1; } #endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ @@ -103570,7 +109047,7 @@ /* ** The select statement passed as the first argument is an aggregate query. -** The second argment is the associated aggregate-info object. This +** The second argument is the associated aggregate-info object. This ** function tests if the SELECT is of the form: ** ** SELECT count(*) FROM @@ -103797,7 +109274,7 @@ pTab->nRef = 1; pTab->zName = sqlite3DbStrDup(db, pCte->zName); pTab->iPKey = -1; - pTab->nRowEst = 1048576; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); pTab->tabFlags |= TF_Ephemeral; pFrom->pSelect = sqlite3SelectDup(db, pCte->pSelect, 0); if( db->mallocFailed ) return SQLITE_NOMEM; @@ -103900,10 +109377,10 @@ ** fill pTabList->a[].pSelect with a copy of the SELECT statement ** that implements the view. A copy is made of the view's SELECT ** statement so that we can freely modify or delete that statement -** without worrying about messing up the presistent representation +** without worrying about messing up the persistent representation ** of the view. ** -** (3) Add terms to the WHERE clause to accomodate the NATURAL keyword +** (3) Add terms to the WHERE clause to accommodate the NATURAL keyword ** on joins and the ON and USING clause of joins. ** ** (4) Scan the list of columns in the result set (pEList) looking @@ -103931,7 +109408,9 @@ } pTabList = p->pSrc; pEList = p->pEList; - sqlite3WithPush(pParse, findRightmost(p)->pWith, 0); + if( pWalker->xSelectCallback2==selectPopWith ){ + sqlite3WithPush(pParse, findRightmost(p)->pWith, 0); + } /* Make sure cursor numbers have been assigned to all entries in ** the FROM clause of the SELECT statement. @@ -103973,7 +109452,7 @@ while( pSel->pPrior ){ pSel = pSel->pPrior; } selectColumnsFromExprList(pParse, pSel->pEList, &pTab->nCol, &pTab->aCol); pTab->iPKey = -1; - pTab->nRowEst = 1048576; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); pTab->tabFlags |= TF_Ephemeral; #endif }else{ @@ -103994,6 +109473,7 @@ if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort; assert( pFrom->pSelect==0 ); pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0); + sqlite3SelectSetName(pFrom->pSelect, pTab->zName); sqlite3WalkSelect(pWalker, pFrom->pSelect); } #endif @@ -104221,7 +109701,9 @@ sqlite3WalkSelect(&w, pSelect); } w.xSelectCallback = selectExpander; - w.xSelectCallback2 = selectPopWith; + if( (pSelect->selFlags & SF_AllValues)==0 ){ + w.xSelectCallback2 = selectPopWith; + } sqlite3WalkSelect(&w, pSelect); } @@ -104352,7 +109834,7 @@ "argument"); pFunc->iDistinct = -1; }else{ - KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0); + KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0, 0); sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0, (char*)pKeyInfo, P4_KEYINFO); } @@ -104468,10 +109950,11 @@ Index *pIdx /* Index used to optimize scan, or NULL */ ){ if( pParse->explain==2 ){ + int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx))); char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s%s%s", - pTab->zName, - pIdx ? " USING COVERING INDEX " : "", - pIdx ? pIdx->zName : "" + pTab->zName, + bCover ? " USING COVERING INDEX " : "", + bCover ? pIdx->zName : "" ); sqlite3VdbeAddOp4( pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC @@ -104507,12 +109990,11 @@ ExprList *pEList; /* List of columns to extract. */ SrcList *pTabList; /* List of tables to select from */ Expr *pWhere; /* The WHERE clause. May be NULL */ - ExprList *pOrderBy; /* The ORDER BY clause. May be NULL */ ExprList *pGroupBy; /* The GROUP BY clause. May be NULL */ Expr *pHaving; /* The HAVING clause. May be NULL */ int rc = 1; /* Value to return from this function */ - int addrSortIndex; /* Address of an OP_OpenEphemeral instruction */ DistinctCtx sDistinct; /* Info on how to code the DISTINCT keyword */ + SortCtx sSort; /* Info on how to code the ORDER BY clause */ AggInfo sAggInfo; /* Information used by aggregate queries */ int iEnd; /* Address of the end of the query */ sqlite3 *db; /* The database connection */ @@ -104528,18 +110010,32 @@ } if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1; memset(&sAggInfo, 0, sizeof(sAggInfo)); +#if SELECTTRACE_ENABLED + pParse->nSelectIndent++; + SELECTTRACE(1,pParse,p, ("begin processing:\n")); + if( sqlite3SelectTrace & 0x100 ){ + sqlite3TreeViewSelect(0, p, 0); + } +#endif + assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistFifo ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_Fifo ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistQueue ); + assert( p->pOrderBy==0 || pDest->eDest!=SRT_Queue ); if( IgnorableOrderby(pDest) ){ assert(pDest->eDest==SRT_Exists || pDest->eDest==SRT_Union || - pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard); + pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard || + pDest->eDest==SRT_Queue || pDest->eDest==SRT_DistFifo || + pDest->eDest==SRT_DistQueue || pDest->eDest==SRT_Fifo); /* If ORDER BY makes no difference in the output then neither does ** DISTINCT so it can be removed too. */ sqlite3ExprListDelete(db, p->pOrderBy); p->pOrderBy = 0; p->selFlags &= ~SF_Distinct; } sqlite3SelectPrep(pParse, p, 0); - pOrderBy = p->pOrderBy; + memset(&sSort, 0, sizeof(sSort)); + sSort.pOrderBy = p->pOrderBy; pTabList = p->pSrc; pEList = p->pEList; if( pParse->nErr || db->mallocFailed ){ @@ -104617,7 +110113,7 @@ sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn); explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); sqlite3Select(pParse, pSub, &dest); - pItem->pTab->nRowEst = (unsigned)pSub->nSelectRow; + pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow); pItem->viaCoroutine = 1; pItem->regResult = dest.iSdst; sqlite3VdbeAddOp1(v, OP_EndCoroutine, pItem->regReturn); @@ -104648,7 +110144,7 @@ sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); sqlite3Select(pParse, pSub, &dest); - pItem->pTab->nRowEst = (unsigned)pSub->nSelectRow; + pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow); if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr); retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn); VdbeComment((v, "end %s", pItem->pTab->zName)); @@ -104661,7 +110157,7 @@ pParse->nHeight -= sqlite3SelectExprHeight(p); pTabList = p->pSrc; if( !IgnorableOrderby(pDest) ){ - pOrderBy = p->pOrderBy; + sSort.pOrderBy = p->pOrderBy; } } pEList = p->pEList; @@ -104677,22 +110173,14 @@ if( p->pPrior ){ rc = multiSelect(pParse, p, pDest); explainSetInteger(pParse->iSelectId, iRestoreSelectId); +#if SELECTTRACE_ENABLED + SELECTTRACE(1,pParse,p,("end compound-select processing\n")); + pParse->nSelectIndent--; +#endif return rc; } #endif - /* If there is both a GROUP BY and an ORDER BY clause and they are - ** identical, then disable the ORDER BY clause since the GROUP BY - ** will cause elements to come out in the correct order. This is - ** an optimization - the correct answer should result regardless. - ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER - ** to disable this optimization for testing purposes. - */ - if( sqlite3ExprListCompare(p->pGroupBy, pOrderBy, -1)==0 - && OptimizationEnabled(db, SQLITE_GroupByOrder) ){ - pOrderBy = 0; - } - /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and ** if the select-list is the same as the ORDER BY list, then this query ** can be rewritten as a GROUP BY. In other words, this: @@ -104701,20 +110189,19 @@ ** ** is transformed to: ** - ** SELECT xyz FROM ... GROUP BY xyz + ** SELECT xyz FROM ... GROUP BY xyz ORDER BY xyz ** ** The second form is preferred as a single index (or temp-table) may be ** used for both the ORDER BY and DISTINCT processing. As originally ** written the query must use a temp-table for at least one of the ORDER ** BY and DISTINCT, and an index or separate temp-table for the other. */ if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct - && sqlite3ExprListCompare(pOrderBy, p->pEList, -1)==0 + && sqlite3ExprListCompare(sSort.pOrderBy, p->pEList, -1)==0 ){ p->selFlags &= ~SF_Distinct; p->pGroupBy = sqlite3ExprListDup(db, p->pEList, 0); pGroupBy = p->pGroupBy; - pOrderBy = 0; /* Notice that even thought SF_Distinct has been cleared from p->selFlags, ** the sDistinct.isTnct is still set. Hence, isTnct represents the ** original setting of the SF_Distinct flag, not the current setting */ @@ -104728,16 +110215,17 @@ ** we figure out that the sorting index is not needed. The addrSortIndex ** variable is used to facilitate that change. */ - if( pOrderBy ){ + if( sSort.pOrderBy ){ KeyInfo *pKeyInfo; - pKeyInfo = keyInfoFromExprList(pParse, pOrderBy, 0); - pOrderBy->iECursor = pParse->nTab++; - p->addrOpenEphm[2] = addrSortIndex = + pKeyInfo = keyInfoFromExprList(pParse, sSort.pOrderBy, 0, pEList->nExpr); + sSort.iECursor = pParse->nTab++; + sSort.addrSortIndex = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, - pOrderBy->iECursor, pOrderBy->nExpr+2, 0, - (char*)pKeyInfo, P4_KEYINFO); + sSort.iECursor, sSort.pOrderBy->nExpr+1+pEList->nExpr, 0, + (char*)pKeyInfo, P4_KEYINFO + ); }else{ - addrSortIndex = -1; + sSort.addrSortIndex = -1; } /* If the output is destined for a temporary table, open that table. @@ -104751,9 +110239,9 @@ iEnd = sqlite3VdbeMakeLabel(v); p->nSelectRow = LARGEST_INT64; computeLimitRegisters(pParse, p, iEnd); - if( p->iLimit==0 && addrSortIndex>=0 ){ - sqlite3VdbeGetOp(v, addrSortIndex)->opcode = OP_SorterOpen; - p->selFlags |= SF_UseSorter; + if( p->iLimit==0 && sSort.addrSortIndex>=0 ){ + sqlite3VdbeGetOp(v, sSort.addrSortIndex)->opcode = OP_SorterOpen; + sSort.sortFlags |= SORTFLAG_UseSorter; } /* Open a virtual index to use for the distinct set. @@ -104762,7 +110250,7 @@ sDistinct.tabTnct = pParse->nTab++; sDistinct.addrTnct = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, sDistinct.tabTnct, 0, 0, - (char*)keyInfoFromExprList(pParse, p->pEList, 0), + (char*)keyInfoFromExprList(pParse, p->pEList,0,0), P4_KEYINFO); sqlite3VdbeChangeP5(v, BTREE_UNORDERED); sDistinct.eTnctType = WHERE_DISTINCT_UNORDERED; @@ -104775,28 +110263,32 @@ u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0); /* Begin the database scan. */ - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pOrderBy, p->pEList, - wctrlFlags, 0); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy, + p->pEList, wctrlFlags, 0); if( pWInfo==0 ) goto select_end; if( sqlite3WhereOutputRowCount(pWInfo) < p->nSelectRow ){ p->nSelectRow = sqlite3WhereOutputRowCount(pWInfo); } if( sDistinct.isTnct && sqlite3WhereIsDistinct(pWInfo) ){ sDistinct.eTnctType = sqlite3WhereIsDistinct(pWInfo); } - if( pOrderBy && sqlite3WhereIsOrdered(pWInfo) ) pOrderBy = 0; + if( sSort.pOrderBy ){ + sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo); + if( sSort.nOBSat==sSort.pOrderBy->nExpr ){ + sSort.pOrderBy = 0; + } + } /* If sorting index that was created by a prior OP_OpenEphemeral ** instruction ended up not being needed, then change the OP_OpenEphemeral ** into an OP_Noop. */ - if( addrSortIndex>=0 && pOrderBy==0 ){ - sqlite3VdbeChangeToNoop(v, addrSortIndex); - p->addrOpenEphm[2] = -1; + if( sSort.addrSortIndex>=0 && sSort.pOrderBy==0 ){ + sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); } /* Use the standard inner loop. */ - selectInnerLoop(pParse, p, pEList, -1, pOrderBy, &sDistinct, pDest, + selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest, sqlite3WhereContinueLabel(pWInfo), sqlite3WhereBreakLabel(pWInfo)); @@ -104817,6 +110309,7 @@ int addrEnd; /* End of processing for this SELECT */ int sortPTab = 0; /* Pseudotable used to decode sorting results */ int sortOut = 0; /* Output register from the sorter */ + int orderByGrp = 0; /* True if the GROUP BY and ORDER BY are the same */ /* Remove any and all aliases between the result set and the ** GROUP BY clause. @@ -104836,6 +110329,18 @@ p->nSelectRow = 1; } + + /* If there is both a GROUP BY and an ORDER BY clause and they are + ** identical, then it may be possible to disable the ORDER BY clause + ** on the grounds that the GROUP BY will cause elements to come out + ** in the correct order. It also may not - the GROUP BY may use a + ** database index that causes rows to be grouped together as required + ** but not actually sorted. Either way, record the fact that the + ** ORDER BY and GROUP BY clauses are the same by setting the orderByGrp + ** variable. */ + if( sqlite3ExprListCompare(pGroupBy, sSort.pOrderBy, -1)==0 ){ + orderByGrp = 1; + } /* Create a label to jump to when we want to abort the query */ addrEnd = sqlite3VdbeMakeLabel(v); @@ -104849,10 +110354,10 @@ sNC.pSrcList = pTabList; sNC.pAggInfo = &sAggInfo; sAggInfo.mnReg = pParse->nMem+1; - sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr+1 : 0; + sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr : 0; sAggInfo.pGroupBy = pGroupBy; sqlite3ExprAnalyzeAggList(&sNC, pEList); - sqlite3ExprAnalyzeAggList(&sNC, pOrderBy); + sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy); if( pHaving ){ sqlite3ExprAnalyzeAggregates(&sNC, pHaving); } @@ -104886,7 +110391,7 @@ ** will be converted into a Noop. */ sAggInfo.sortingIdx = pParse->nTab++; - pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0); + pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0, sAggInfo.nColumn); addrSortingIdx = sqlite3VdbeAddOp4(v, OP_SorterOpen, sAggInfo.sortingIdx, sAggInfo.nSortingColumn, 0, (char*)pKeyInfo, P4_KEYINFO); @@ -104915,10 +110420,11 @@ ** in the right order to begin with. */ sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, - WHERE_GROUPBY, 0); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, + WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0 + ); if( pWInfo==0 ) goto select_end; - if( sqlite3WhereIsOrdered(pWInfo) ){ + if( sqlite3WhereIsOrdered(pWInfo)==pGroupBy->nExpr ){ /* The optimizer is able to deliver rows in group by order so ** we do not have to sort. The OP_OpenEphemeral table will be ** cancelled later because we still need to use the pKeyInfo @@ -104941,8 +110447,8 @@ groupBySort = 1; nGroupBy = pGroupBy->nExpr; - nCol = nGroupBy + 1; - j = nGroupBy+1; + nCol = nGroupBy; + j = nGroupBy; for(i=0; i=j ){ nCol++; @@ -104952,8 +110458,7 @@ regBase = sqlite3GetTempRange(pParse, nCol); sqlite3ExprCacheClear(pParse); sqlite3ExprCodeExprList(pParse, pGroupBy, regBase, 0); - sqlite3VdbeAddOp2(v, OP_Sequence, sAggInfo.sortingIdx,regBase+nGroupBy); - j = nGroupBy+1; + j = nGroupBy; for(i=0; iiSorterColumn>=j ){ @@ -104981,8 +110486,23 @@ VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v); sAggInfo.useSortingIdx = 1; sqlite3ExprCacheClear(pParse); + } + /* If the index or temporary table used by the GROUP BY sort + ** will naturally deliver rows in the order required by the ORDER BY + ** clause, cancel the ephemeral table open coded earlier. + ** + ** This is an optimization - the correct answer should result regardless. + ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER to + ** disable this optimization for testing purposes. */ + if( orderByGrp && OptimizationEnabled(db, SQLITE_GroupByOrder) + && (groupBySort || sqlite3WhereIsSorted(pWInfo)) + ){ + sSort.pOrderBy = 0; + sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); + } + /* Evaluate the current GROUP BY terms and store in b0, b1, b2... ** (b0 is memory location iBMem+0, b1 is iBMem+1, and so forth) ** Then compare the current GROUP BY terms against the GROUP BY terms @@ -104991,12 +110511,11 @@ addrTopOfLoop = sqlite3VdbeCurrentAddr(v); sqlite3ExprCacheClear(pParse); if( groupBySort ){ - sqlite3VdbeAddOp2(v, OP_SorterData, sAggInfo.sortingIdx, sortOut); + sqlite3VdbeAddOp3(v, OP_SorterData, sAggInfo.sortingIdx, sortOut,sortPTab); } for(j=0; jnExpr; j++){ if( groupBySort ){ sqlite3VdbeAddOp3(v, OP_Column, sortPTab, j, iBMem+j); - if( j==0 ) sqlite3VdbeChangeP5(v, OPFLAG_CLEARCACHE); }else{ sAggInfo.directMode = 1; sqlite3ExprCode(pParse, pGroupBy->a[j].pExpr, iBMem+j); @@ -105069,7 +110588,7 @@ sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); finalizeAggFunctions(pParse, &sAggInfo); sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, -1, pOrderBy, + selectInnerLoop(pParse, p, p->pEList, -1, &sSort, &sDistinct, pDest, addrOutputRow+1, addrSetAbort); sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); @@ -105201,7 +110720,7 @@ } updateAccumulator(pParse, &sAggInfo); assert( pMinMax==0 || pMinMax->nExpr==1 ); - if( sqlite3WhereIsOrdered(pWInfo) ){ + if( sqlite3WhereIsOrdered(pWInfo)>0 ){ sqlite3VdbeAddOp2(v, OP_Goto, 0, sqlite3WhereBreakLabel(pWInfo)); VdbeComment((v, "%s() by index", (flag==WHERE_ORDERBY_MIN?"min":"max"))); @@ -105210,7 +110729,7 @@ finalizeAggFunctions(pParse, &sAggInfo); } - pOrderBy = 0; + sSort.pOrderBy = 0; sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL); selectInnerLoop(pParse, p, p->pEList, -1, 0, 0, pDest, addrEnd, addrEnd); @@ -105227,9 +110746,9 @@ /* If there is an ORDER BY clause, then we need to sort the results ** and send them to the callback one by one. */ - if( pOrderBy ){ - explainTempTable(pParse, "ORDER BY"); - generateSortTail(pParse, p, v, pEList->nExpr, pDest); + if( sSort.pOrderBy ){ + explainTempTable(pParse, sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY"); + generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest); } /* Jump here to skip this query @@ -105255,104 +110774,107 @@ sqlite3DbFree(db, sAggInfo.aCol); sqlite3DbFree(db, sAggInfo.aFunc); +#if SELECTTRACE_ENABLED + SELECTTRACE(1,pParse,p,("end processing\n")); + pParse->nSelectIndent--; +#endif return rc; } -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) +#ifdef SQLITE_DEBUG /* ** Generate a human-readable description of a the Select object. */ -static void explainOneSelect(Vdbe *pVdbe, Select *p){ - sqlite3ExplainPrintf(pVdbe, "SELECT "); - if( p->selFlags & (SF_Distinct|SF_Aggregate) ){ - if( p->selFlags & SF_Distinct ){ - sqlite3ExplainPrintf(pVdbe, "DISTINCT "); - } - if( p->selFlags & SF_Aggregate ){ - sqlite3ExplainPrintf(pVdbe, "agg_flag "); - } - sqlite3ExplainNL(pVdbe); - sqlite3ExplainPrintf(pVdbe, " "); - } - sqlite3ExplainExprList(pVdbe, p->pEList); - sqlite3ExplainNL(pVdbe); +SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){ + int n = 0; + pView = sqlite3TreeViewPush(pView, moreToFollow); + sqlite3TreeViewLine(pView, "SELECT%s%s", + ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""), + ((p->selFlags & SF_Aggregate) ? " agg_flag" : "") + ); + if( p->pSrc && p->pSrc->nSrc ) n++; + if( p->pWhere ) n++; + if( p->pGroupBy ) n++; + if( p->pHaving ) n++; + if( p->pOrderBy ) n++; + if( p->pLimit ) n++; + if( p->pOffset ) n++; + if( p->pPrior ) n++; + sqlite3TreeViewExprList(pView, p->pEList, (n--)>0, "result-set"); if( p->pSrc && p->pSrc->nSrc ){ int i; - sqlite3ExplainPrintf(pVdbe, "FROM "); - sqlite3ExplainPush(pVdbe); + pView = sqlite3TreeViewPush(pView, (n--)>0); + sqlite3TreeViewLine(pView, "FROM"); for(i=0; ipSrc->nSrc; i++){ struct SrcList_item *pItem = &p->pSrc->a[i]; - sqlite3ExplainPrintf(pVdbe, "{%d,*} = ", pItem->iCursor); - if( pItem->pSelect ){ - sqlite3ExplainSelect(pVdbe, pItem->pSelect); - if( pItem->pTab ){ - sqlite3ExplainPrintf(pVdbe, " (tabname=%s)", pItem->pTab->zName); - } + StrAccum x; + char zLine[100]; + sqlite3StrAccumInit(&x, zLine, sizeof(zLine), 0); + sqlite3XPrintf(&x, 0, "{%d,*}", pItem->iCursor); + if( pItem->zDatabase ){ + sqlite3XPrintf(&x, 0, " %s.%s", pItem->zDatabase, pItem->zName); }else if( pItem->zName ){ - sqlite3ExplainPrintf(pVdbe, "%s", pItem->zName); + sqlite3XPrintf(&x, 0, " %s", pItem->zName); } + if( pItem->pTab ){ + sqlite3XPrintf(&x, 0, " tabname=%Q", pItem->pTab->zName); + } if( pItem->zAlias ){ - sqlite3ExplainPrintf(pVdbe, " (AS %s)", pItem->zAlias); + sqlite3XPrintf(&x, 0, " (AS %s)", pItem->zAlias); } if( pItem->jointype & JT_LEFT ){ - sqlite3ExplainPrintf(pVdbe, " LEFT-JOIN"); + sqlite3XPrintf(&x, 0, " LEFT-JOIN"); } - sqlite3ExplainNL(pVdbe); + sqlite3StrAccumFinish(&x); + sqlite3TreeViewItem(pView, zLine, ipSrc->nSrc-1); + if( pItem->pSelect ){ + sqlite3TreeViewSelect(pView, pItem->pSelect, 0); + } + sqlite3TreeViewPop(pView); } - sqlite3ExplainPop(pVdbe); + sqlite3TreeViewPop(pView); } if( p->pWhere ){ - sqlite3ExplainPrintf(pVdbe, "WHERE "); - sqlite3ExplainExpr(pVdbe, p->pWhere); - sqlite3ExplainNL(pVdbe); + sqlite3TreeViewItem(pView, "WHERE", (n--)>0); + sqlite3TreeViewExpr(pView, p->pWhere, 0); + sqlite3TreeViewPop(pView); } if( p->pGroupBy ){ - sqlite3ExplainPrintf(pVdbe, "GROUPBY "); - sqlite3ExplainExprList(pVdbe, p->pGroupBy); - sqlite3ExplainNL(pVdbe); + sqlite3TreeViewExprList(pView, p->pGroupBy, (n--)>0, "GROUPBY"); } if( p->pHaving ){ - sqlite3ExplainPrintf(pVdbe, "HAVING "); - sqlite3ExplainExpr(pVdbe, p->pHaving); - sqlite3ExplainNL(pVdbe); + sqlite3TreeViewItem(pView, "HAVING", (n--)>0); + sqlite3TreeViewExpr(pView, p->pHaving, 0); + sqlite3TreeViewPop(pView); } if( p->pOrderBy ){ - sqlite3ExplainPrintf(pVdbe, "ORDERBY "); - sqlite3ExplainExprList(pVdbe, p->pOrderBy); - sqlite3ExplainNL(pVdbe); + sqlite3TreeViewExprList(pView, p->pOrderBy, (n--)>0, "ORDERBY"); } if( p->pLimit ){ - sqlite3ExplainPrintf(pVdbe, "LIMIT "); - sqlite3ExplainExpr(pVdbe, p->pLimit); - sqlite3ExplainNL(pVdbe); + sqlite3TreeViewItem(pView, "LIMIT", (n--)>0); + sqlite3TreeViewExpr(pView, p->pLimit, 0); + sqlite3TreeViewPop(pView); } if( p->pOffset ){ - sqlite3ExplainPrintf(pVdbe, "OFFSET "); - sqlite3ExplainExpr(pVdbe, p->pOffset); - sqlite3ExplainNL(pVdbe); + sqlite3TreeViewItem(pView, "OFFSET", (n--)>0); + sqlite3TreeViewExpr(pView, p->pOffset, 0); + sqlite3TreeViewPop(pView); } -} -SQLITE_PRIVATE void sqlite3ExplainSelect(Vdbe *pVdbe, Select *p){ - if( p==0 ){ - sqlite3ExplainPrintf(pVdbe, "(null-select)"); - return; + if( p->pPrior ){ + const char *zOp = "UNION"; + switch( p->op ){ + case TK_ALL: zOp = "UNION ALL"; break; + case TK_INTERSECT: zOp = "INTERSECT"; break; + case TK_EXCEPT: zOp = "EXCEPT"; break; + } + sqlite3TreeViewItem(pView, zOp, (n--)>0); + sqlite3TreeViewSelect(pView, p->pPrior, 0); + sqlite3TreeViewPop(pView); } - sqlite3ExplainPush(pVdbe); - while( p ){ - explainOneSelect(pVdbe, p); - p = p->pNext; - if( p==0 ) break; - sqlite3ExplainNL(pVdbe); - sqlite3ExplainPrintf(pVdbe, "%s\n", selectOpName(p->op)); - } - sqlite3ExplainPrintf(pVdbe, "END"); - sqlite3ExplainPop(pVdbe); + sqlite3TreeViewPop(pView); } +#endif /* SQLITE_DEBUG */ -/* End of the structure debug printing code -*****************************************************************************/ -#endif /* defined(SQLITE_ENABLE_TREE_EXPLAIN) */ - /************** End of select.c **********************************************/ /************** Begin file table.c *******************************************/ /* @@ -105385,10 +110907,10 @@ typedef struct TabResult { char **azResult; /* Accumulated output */ char *zErrMsg; /* Error message text, if an error occurs */ - int nAlloc; /* Slots allocated for azResult[] */ - int nRow; /* Number of rows in the result */ - int nColumn; /* Number of columns in the result */ - int nData; /* Slots used in azResult[]. (nRow+1)*nColumn */ + u32 nAlloc; /* Slots allocated for azResult[] */ + u32 nRow; /* Number of rows in the result */ + u32 nColumn; /* Number of columns in the result */ + u32 nData; /* Slots used in azResult[]. (nRow+1)*nColumn */ int rc; /* Return code from sqlite3_exec() */ } TabResult; @@ -105414,7 +110936,7 @@ if( p->nData + need > p->nAlloc ){ char **azNew; p->nAlloc = p->nAlloc*2 + need; - azNew = sqlite3_realloc( p->azResult, sizeof(char*)*p->nAlloc ); + azNew = sqlite3_realloc64( p->azResult, sizeof(char*)*p->nAlloc ); if( azNew==0 ) goto malloc_failed; p->azResult = azNew; } @@ -105429,7 +110951,7 @@ if( z==0 ) goto malloc_failed; p->azResult[p->nData++] = z; } - }else if( p->nColumn!=nCol ){ + }else if( (int)p->nColumn!=nCol ){ sqlite3_free(p->zErrMsg); p->zErrMsg = sqlite3_mprintf( "sqlite3_get_table() called with two or more incompatible queries" @@ -105482,6 +111004,9 @@ int rc; TabResult res; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || pazResult==0 ) return SQLITE_MISUSE_BKPT; +#endif *pazResult = 0; if( pnColumn ) *pnColumn = 0; if( pnRow ) *pnRow = 0; @@ -105538,7 +111063,7 @@ ** This routine frees the space the sqlite3_get_table() malloced. */ SQLITE_API void sqlite3_free_table( - char **azResult /* Result returned from from sqlite3_get_table() */ + char **azResult /* Result returned from sqlite3_get_table() */ ){ if( azResult ){ int i, n; @@ -105682,7 +111207,7 @@ ** ^^^^^^^^ ** ** To maintain backwards compatibility, ignore the database - ** name on pTableName if we are reparsing our of SQLITE_MASTER. + ** name on pTableName if we are reparsing out of SQLITE_MASTER. */ if( db->init.busy && iDb!=1 ){ sqlite3DbFree(db, pTableName->a[0].zDatabase); @@ -105735,8 +111260,7 @@ goto trigger_cleanup; } assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash), - zName, sqlite3Strlen30(zName)) ){ + if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash),zName) ){ if( !noErr ){ sqlite3ErrorMsg(pParse, "trigger %T already exists", pName); }else{ @@ -105879,13 +111403,12 @@ Trigger *pLink = pTrig; Hash *pHash = &db->aDb[iDb].pSchema->trigHash; assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - pTrig = sqlite3HashInsert(pHash, zName, sqlite3Strlen30(zName), pTrig); + pTrig = sqlite3HashInsert(pHash, zName, pTrig); if( pTrig ){ db->mallocFailed = 1; }else if( pLink->pSchema==pLink->pTabSchema ){ Table *pTab; - int n = sqlite3Strlen30(pLink->table); - pTab = sqlite3HashFind(&pLink->pTabSchema->tblHash, pLink->table, n); + pTab = sqlite3HashFind(&pLink->pTabSchema->tblHash, pLink->table); assert( pTab!=0 ); pLink->pNext = pTab->pTrigger; pTab->pTrigger = pLink; @@ -106044,7 +111567,6 @@ int i; const char *zDb; const char *zName; - int nName; sqlite3 *db = pParse->db; if( db->mallocFailed ) goto drop_trigger_cleanup; @@ -106055,13 +111577,12 @@ assert( pName->nSrc==1 ); zDb = pName->a[0].zDatabase; zName = pName->a[0].zName; - nName = sqlite3Strlen30(zName); assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) ); for(i=OMIT_TEMPDB; inDb; i++){ int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */ if( zDb && sqlite3StrICmp(db->aDb[j].zName, zDb) ) continue; assert( sqlite3SchemaMutexHeld(db, j, 0) ); - pTrigger = sqlite3HashFind(&(db->aDb[j].pSchema->trigHash), zName, nName); + pTrigger = sqlite3HashFind(&(db->aDb[j].pSchema->trigHash), zName); if( pTrigger ) break; } if( !pTrigger ){ @@ -106084,8 +111605,7 @@ ** is set on. */ static Table *tableOfTrigger(Trigger *pTrigger){ - int n = sqlite3Strlen30(pTrigger->table); - return sqlite3HashFind(&pTrigger->pTabSchema->tblHash, pTrigger->table, n); + return sqlite3HashFind(&pTrigger->pTabSchema->tblHash, pTrigger->table); } @@ -106157,7 +111677,7 @@ assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); pHash = &(db->aDb[iDb].pSchema->trigHash); - pTrigger = sqlite3HashInsert(pHash, zName, sqlite3Strlen30(zName), 0); + pTrigger = sqlite3HashInsert(pHash, zName, 0); if( ALWAYS(pTrigger) ){ if( pTrigger->pSchema==pTrigger->pTabSchema ){ Table *pTab = tableOfTrigger(pTrigger); @@ -106868,7 +112388,7 @@ iIdxCur = iDataCur+1; pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ - if( pIdx->autoIndex==2 && pPk!=0 ){ + if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){ iDataCur = pParse->nTab; pTabList->a[0].iCursor = iDataCur; } @@ -107008,7 +112528,7 @@ } /* If we are trying to update a view, realize that view into - ** a ephemeral table. + ** an ephemeral table. */ #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) if( isView ){ @@ -107112,14 +112632,15 @@ /* Top of the update loop */ if( okOnePass ){ - if( aToOpen[iDataCur-iBaseCur] ){ - assert( pPk!=0 ); + if( aToOpen[iDataCur-iBaseCur] && !isView ){ + assert( pPk ); sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey); VdbeCoverageNeverTaken(v); } labelContinue = labelBreak; sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); - VdbeCoverage(v); + VdbeCoverageIf(v, pPk==0); + VdbeCoverageIf(v, pPk!=0); }else if( pPk ){ labelContinue = sqlite3VdbeMakeLabel(v); sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); @@ -107168,7 +112689,7 @@ } /* Populate the array of registers beginning at regNew with the new - ** row data. This array is used to check constaints, create the new + ** row data. This array is used to check constants, create the new ** table and index records, and as the values for any new.* references ** made by triggers. ** @@ -107348,7 +112869,7 @@ return; } /* Make sure "isView" and other macros defined above are undefined. Otherwise -** thely may interfere with compilation of other functions in this file +** they may interfere with compilation of other functions in this file ** (or in another file, if this file becomes part of the amalgamation). */ #ifdef isView #undef isView @@ -107361,15 +112882,15 @@ /* ** Generate code for an UPDATE of a virtual table. ** -** The strategy is that we create an ephemerial table that contains +** The strategy is that we create an ephemeral table that contains ** for each row to be changed: ** ** (A) The original rowid of that row. ** (B) The revised rowid for the row. (note1) ** (C) The content of every column in the row. ** ** Then we loop over this ephemeral table and for each row in -** the ephermeral table call VUpdate. +** the ephemeral table call VUpdate. ** ** When finished, drop the ephemeral table. ** @@ -107542,14 +113063,14 @@ ** step (3) requires additional temporary disk space approximately equal ** to the size of the original database for the rollback journal. ** Hence, temporary disk space that is approximately 2x the size of the -** orginal database is required. Every page of the database is written +** original database is required. Every page of the database is written ** approximately 3 times: Once for step (2) and twice for step (3). ** Two writes per page are required in step (3) because the original ** database content must be written into the rollback journal prior to ** overwriting the database with the vacuumed content. ** ** Only 1x temporary space and only 1x writes would be required if -** the copy of step (3) were replace by deleting the original database +** the copy of step (3) were replaced by deleting the original database ** and renaming the transient database as the original. But that will ** not work if other processes are attached to the original database. ** And a power loss in between deleting the original and renaming the @@ -107869,7 +113390,7 @@ sqlite3_mutex_enter(db->mutex); nName = sqlite3Strlen30(zName); - if( sqlite3HashFind(&db->aModule, zName, nName) ){ + if( sqlite3HashFind(&db->aModule, zName) ){ rc = SQLITE_MISUSE_BKPT; }else{ Module *pMod; @@ -107882,7 +113403,7 @@ pMod->pModule = pModule; pMod->pAux = pAux; pMod->xDestroy = xDestroy; - pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,nName,(void*)pMod); + pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod); assert( pDel==0 || pDel==pMod ); if( pDel ){ db->mallocFailed = 1; @@ -107907,6 +113428,9 @@ const sqlite3_module *pModule, /* The definition of the module */ void *pAux /* Context pointer for xCreate/xConnect */ ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return SQLITE_MISUSE_BKPT; +#endif return createModule(db, zName, pModule, pAux, 0); } @@ -107920,6 +113444,9 @@ void *pAux, /* Context pointer for xCreate/xConnect */ void (*xDestroy)(void *) /* Module destructor function */ ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return SQLITE_MISUSE_BKPT; +#endif return createModule(db, zName, pModule, pAux, xDestroy); } @@ -108152,7 +113679,12 @@ addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName)); addModuleArgument(db, pTable, 0); addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName)); - pParse->sNameToken.n = (int)(&pModuleName->z[pModuleName->n] - pName1->z); + assert( (pParse->sNameToken.z==pName2->z && pName2->z!=0) + || (pParse->sNameToken.z==pName1->z && pName2->z==0) + ); + pParse->sNameToken.n = (int)( + &pModuleName->z[pModuleName->n] - pParse->sNameToken.z + ); #ifndef SQLITE_OMIT_AUTHORIZATION /* Creating a virtual table invokes the authorization callback twice. @@ -108251,9 +113783,8 @@ Table *pOld; Schema *pSchema = pTab->pSchema; const char *zName = pTab->zName; - int nName = sqlite3Strlen30(zName); assert( sqlite3SchemaMutexHeld(db, 0, pSchema) ); - pOld = sqlite3HashInsert(&pSchema->tblHash, zName, nName, pTab); + pOld = sqlite3HashInsert(&pSchema->tblHash, zName, pTab); if( pOld ){ db->mallocFailed = 1; assert( pTab==pOld ); /* Malloc must have failed inside HashInsert() */ @@ -108346,6 +113877,7 @@ }else if( ALWAYS(pVTable->pVtab) ){ /* Justification of ALWAYS(): A correct vtab constructor must allocate ** the sqlite3_vtab object if successful. */ + memset(pVTable->pVtab, 0, sizeof(pVTable->pVtab[0])); pVTable->pVtab->pModule = pMod->pModule; pVTable->nRef = 1; if( sCtx.pTab ){ @@ -108419,7 +113951,7 @@ /* Locate the required virtual table module */ zMod = pTab->azModuleArg[0]; - pMod = (Module*)sqlite3HashFind(&db->aModule, zMod, sqlite3Strlen30(zMod)); + pMod = (Module*)sqlite3HashFind(&db->aModule, zMod); if( !pMod ){ const char *zModule = pTab->azModuleArg[0]; @@ -108487,7 +114019,7 @@ /* Locate the required virtual table module */ zMod = pTab->azModuleArg[0]; - pMod = (Module*)sqlite3HashFind(&db->aModule, zMod, sqlite3Strlen30(zMod)); + pMod = (Module*)sqlite3HashFind(&db->aModule, zMod); /* If the module has been registered and includes a Create method, ** invoke it now. If the module has not been registered, return an @@ -108524,9 +114056,12 @@ Table *pTab; char *zErr = 0; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); if( !db->pVtabCtx || !(pTab = db->pVtabCtx->pTab) ){ - sqlite3Error(db, SQLITE_MISUSE, 0); + sqlite3Error(db, SQLITE_MISUSE); sqlite3_mutex_leave(db->mutex); return SQLITE_MISUSE_BKPT; } @@ -108554,7 +114089,7 @@ } db->pVtabCtx->pTab = 0; }else{ - sqlite3Error(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); + sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); sqlite3DbFree(db, zErr); rc = SQLITE_ERROR; } @@ -108880,6 +114415,9 @@ static const unsigned char aMap[] = { SQLITE_ROLLBACK, SQLITE_ABORT, SQLITE_FAIL, SQLITE_IGNORE, SQLITE_REPLACE }; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif assert( OE_Rollback==1 && OE_Abort==2 && OE_Fail==3 ); assert( OE_Ignore==4 && OE_Replace==5 ); assert( db->vtabOnConflict>=1 && db->vtabOnConflict<=5 ); @@ -108895,8 +114433,10 @@ va_list ap; int rc = SQLITE_OK; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); - va_start(ap, op); switch( op ){ case SQLITE_VTAB_CONSTRAINT_SUPPORT: { @@ -108915,7 +114455,7 @@ } va_end(ap); - if( rc!=SQLITE_OK ) sqlite3Error(db, rc, 0); + if( rc!=SQLITE_OK ) sqlite3Error(db, rc); sqlite3_mutex_leave(db->mutex); return rc; } @@ -109031,6 +114571,9 @@ } u; struct WhereLoop *pWLoop; /* The selected WhereLoop object */ Bitmask notReady; /* FROM entries not usable at this level */ +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + int addrVisit; /* Address at which row is visited */ +#endif }; /* @@ -109061,25 +114604,25 @@ union { struct { /* Information for internal btree tables */ u16 nEq; /* Number of equality constraints */ - u16 nSkip; /* Number of initial index columns to skip */ Index *pIndex; /* Index used, or NULL */ } btree; struct { /* Information for virtual tables */ int idxNum; /* Index number */ u8 needFree; /* True if sqlite3_free(idxStr) is needed */ - u8 isOrdered; /* True if satisfies ORDER BY */ + i8 isOrdered; /* True if satisfies ORDER BY */ u16 omitMask; /* Terms that may be omitted */ char *idxStr; /* Index identifier string */ } vtab; } u; u32 wsFlags; /* WHERE_* flags describing the plan */ u16 nLTerm; /* Number of entries in aLTerm[] */ + u16 nSkip; /* Number of NULL aLTerm[] entries */ /**** whereLoopXfer() copies fields above ***********************/ # define WHERE_LOOP_XFER_SZ offsetof(WhereLoop,nLSlot) u16 nLSlot; /* Number of slots allocated for aLTerm[] */ WhereTerm **aLTerm; /* WhereTerms used */ WhereLoop *pNextLoop; /* Next WhereLoop object in the WhereClause */ - WhereTerm *aLTermSpace[4]; /* Initial aLTerm[] space */ + WhereTerm *aLTermSpace[3]; /* Initial aLTerm[] space */ }; /* This object holds the prerequisites and the cost of running a @@ -109122,15 +114665,15 @@ ** 1. Then using those as a basis to compute the N best WherePath objects ** of length 2. And so forth until the length of WherePaths equals the ** number of nodes in the FROM clause. The best (lowest cost) WherePath -** at the end is the choosen query plan. +** at the end is the chosen query plan. */ struct WherePath { Bitmask maskLoop; /* Bitmask of all WhereLoop objects in this path */ Bitmask revLoop; /* aLoop[]s that should be reversed for ORDER BY */ LogEst nRow; /* Estimated number of rows generated by this path */ LogEst rCost; /* Total cost of this path */ - u8 isOrdered; /* True if this path satisfies ORDER BY */ - u8 isOrderedValid; /* True if the isOrdered field is valid */ + LogEst rUnsorted; /* Total cost of this path ignoring sorting costs */ + i8 isOrdered; /* No. of ORDER BY terms satisfied. -1 for unknown */ WhereLoop **aLoop; /* Array of WhereLoop objects implementing this path */ }; @@ -109344,7 +114887,8 @@ Bitmask revMask; /* Mask of ORDER BY terms that need reversing */ LogEst nRowOut; /* Estimated number of output rows */ u16 wctrlFlags; /* Flags originally passed to sqlite3WhereBegin() */ - u8 bOBSat; /* ORDER BY satisfied by indices */ + i8 nOBSat; /* Number of ORDER BY terms satisfied by indices */ + u8 sorted; /* True if really sorted (not just grouped) */ u8 okOnePass; /* Ok to use one-pass algorithm for UPDATE/DELETE */ u8 untestedTerms; /* Not all WHERE terms resolved by outer loop */ u8 eDistinct; /* One of the WHERE_DISTINCT_* values below */ @@ -109404,6 +114948,7 @@ #define WHERE_AUTO_INDEX 0x00004000 /* Uses an ephemeral index */ #define WHERE_SKIPSCAN 0x00008000 /* Uses the skip-scan algorithm */ #define WHERE_UNQ_WANTED 0x00010000 /* WHERE_ONEROW would have been helpful*/ +#define WHERE_PARTIALIDX 0x00020000 /* The automatic index is partial */ /************** End of whereInt.h ********************************************/ /************** Continuing where we left off in where.c **********************/ @@ -109428,14 +114973,15 @@ ** Return FALSE if the output needs to be sorted. */ SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo *pWInfo){ - return pWInfo->bOBSat!=0; + return pWInfo->nOBSat; } /* ** Return the VDBE address or label to jump to in order to continue ** immediately with the next row of a WHERE clause. */ SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo *pWInfo){ + assert( pWInfo->iContinue!=0 ); return pWInfo->iContinue; } @@ -109610,12 +115156,13 @@ sqlite3DbFree(db, pOld); } pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]); + memset(&pWC->a[pWC->nTerm], 0, sizeof(pWC->a[0])*(pWC->nSlot-pWC->nTerm)); } pTerm = &pWC->a[idx = pWC->nTerm++]; if( p && ExprHasProperty(p, EP_Unlikely) ){ - pTerm->truthProb = sqlite3LogEst(p->iTable) - 99; + pTerm->truthProb = sqlite3LogEst(p->iTable) - 270; }else{ - pTerm->truthProb = -1; + pTerm->truthProb = 1; } pTerm->pExpr = sqlite3ExprSkipCollate(p); pTerm->wtFlags = wtFlags; @@ -109753,11 +115300,6 @@ } /* -** Swap two objects of type TYPE. -*/ -#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;} - -/* ** Commute a comparison operator. Expressions of the form "X op Y" ** are converted into "Y op X". ** @@ -109932,7 +115474,7 @@ if( pIdx && iColumn>=0 ){ pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity; for(j=0; pIdx->aiColumn[j]!=iColumn; j++){ - if( NEVER(j>=pIdx->nKeyCol) ) return 0; + if( NEVER(j>pIdx->nColumn) ) return 0; } pScan->zCollName = pIdx->azColl[j]; }else{ @@ -110089,7 +115631,7 @@ ** value of the variable means there is no need to invoke the LIKE ** function, then no OP_Variable will be added to the program. ** This causes problems for the sqlite3_bind_parameter_name() - ** API. To workaround them, add a dummy OP_Variable here. + ** API. To work around them, add a dummy OP_Variable here. */ int r1 = sqlite3GetTempReg(pParse); sqlite3ExprCodeTarget(pParse, pRight, r1); @@ -110149,6 +115691,15 @@ } } +/* +** Mark term iChild as being a child of term iParent +*/ +static void markTermAsChild(WhereClause *pWC, int iChild, int iParent){ + pWC->a[iChild].iParent = iParent; + pWC->a[iChild].truthProb = pWC->a[iParent].truthProb; + pWC->a[iParent].nChild++; +} + #if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY) /* ** Analyze a term that consists of two or more OR-connected @@ -110209,7 +115760,7 @@ ** appropriate for indexing exist. ** ** All examples A through E above satisfy case 2. But if a term -** also statisfies case 1 (such as B) we know that the optimizer will +** also satisfies case 1 (such as B) we know that the optimizer will ** always prefer case 1, so in that case we pretend that case 2 is not ** satisfied. ** @@ -110367,7 +115918,7 @@ } if( (chngToIN & getMask(&pWInfo->sMaskSet, pOrTerm->leftCursor))==0 ){ /* This term must be of the form t1.a==t2.b where t2 is in the - ** chngToIN set but t1 is not. This term will be either preceeded + ** chngToIN set but t1 is not. This term will be either preceded ** or follwed by an inverted copy (t2.b==t1.a). Skip this term ** and use its inversion. */ testcase( pOrTerm->wtFlags & TERM_COPIED ); @@ -110446,8 +115997,7 @@ testcase( idxNew==0 ); exprAnalyze(pSrc, pWC, idxNew); pTerm = &pWC->a[idxTerm]; - pWC->a[idxNew].iParent = idxTerm; - pTerm->nChild = 1; + markTermAsChild(pWC, idxNew, idxTerm); }else{ sqlite3ExprListDelete(db, pList); } @@ -110549,9 +116099,8 @@ idxNew = whereClauseInsert(pWC, pDup, TERM_VIRTUAL|TERM_DYNAMIC); if( idxNew==0 ) return; pNew = &pWC->a[idxNew]; - pNew->iParent = idxTerm; + markTermAsChild(pWC, idxNew, idxTerm); pTerm = &pWC->a[idxTerm]; - pTerm->nChild = 1; pTerm->wtFlags |= TERM_COPIED; if( pExpr->op==TK_EQ && !ExprHasProperty(pExpr, EP_FromJoin) @@ -110608,9 +116157,8 @@ testcase( idxNew==0 ); exprAnalyze(pSrc, pWC, idxNew); pTerm = &pWC->a[idxTerm]; - pWC->a[idxNew].iParent = idxTerm; + markTermAsChild(pWC, idxNew, idxTerm); } - pTerm->nChild = 2; } #endif /* SQLITE_OMIT_BETWEEN_OPTIMIZATION */ @@ -110685,9 +116233,8 @@ exprAnalyze(pSrc, pWC, idxNew2); pTerm = &pWC->a[idxTerm]; if( isComplete ){ - pWC->a[idxNew1].iParent = idxTerm; - pWC->a[idxNew2].iParent = idxTerm; - pTerm->nChild = 2; + markTermAsChild(pWC, idxNew1, idxTerm); + markTermAsChild(pWC, idxNew2, idxTerm); } } #endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ @@ -110720,9 +116267,8 @@ pNewTerm->leftCursor = pLeft->iTable; pNewTerm->u.leftColumn = pLeft->iColumn; pNewTerm->eOperator = WO_MATCH; - pNewTerm->iParent = idxTerm; + markTermAsChild(pWC, idxNew, idxTerm); pTerm = &pWC->a[idxTerm]; - pTerm->nChild = 1; pTerm->wtFlags |= TERM_COPIED; pNewTerm->prereqAll = pTerm->prereqAll; } @@ -110743,7 +116289,7 @@ if( pExpr->op==TK_NOTNULL && pExpr->pLeft->op==TK_COLUMN && pExpr->pLeft->iColumn>=0 - && OptimizationEnabled(db, SQLITE_Stat3) + && OptimizationEnabled(db, SQLITE_Stat34) ){ Expr *pNewExpr; Expr *pLeft = pExpr->pLeft; @@ -110762,9 +116308,8 @@ pNewTerm->leftCursor = pLeft->iTable; pNewTerm->u.leftColumn = pLeft->iColumn; pNewTerm->eOperator = WO_GT; - pNewTerm->iParent = idxTerm; + markTermAsChild(pWC, idxNew, idxTerm); pTerm = &pWC->a[idxTerm]; - pTerm->nChild = 1; pTerm->wtFlags |= TERM_COPIED; pNewTerm->prereqAll = pTerm->prereqAll; } @@ -110778,7 +116323,7 @@ } /* -** This function searches pList for a entry that matches the iCol-th column +** This function searches pList for an entry that matches the iCol-th column ** of index pIdx. ** ** If such an expression is found, its index in pList->a[] is returned. If @@ -110858,7 +116403,7 @@ ** contain a "col=X" term are subject to a NOT NULL constraint. */ for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->onError==OE_None ) continue; + if( !IsUniqueIndex(pIdx) ) continue; for(i=0; inKeyCol; i++){ i16 iCol = pIdx->aiColumn[i]; if( 0==findTerm(pWC, iBase, iCol, ~(Bitmask)0, WO_EQ, pIdx) ){ @@ -110882,8 +116427,7 @@ ** Estimate the logarithm of the input value to base 2. */ static LogEst estLog(LogEst N){ - LogEst x = sqlite3LogEst(N); - return x>33 ? x - 33 : 0; + return N<=10 ? 0 : sqlite3LogEst(N) - 33; } /* @@ -110985,6 +116529,8 @@ Bitmask idxCols; /* Bitmap of columns used for indexing */ Bitmask extraCols; /* Bitmap of additional columns */ u8 sentWarning = 0; /* True if a warnning has been issued */ + Expr *pPartial = 0; /* Partial Index Expression */ + int iContinue = 0; /* Jump here to skip excluded rows */ /* Generate code to skip over the creation and initialization of the ** transient index on 2nd and subsequent iterations of the loop. */ @@ -111000,6 +116546,12 @@ pLoop = pLevel->pWLoop; idxCols = 0; for(pTerm=pWC->a; pTermprereq==0 + && (pTerm->wtFlags & TERM_VIRTUAL)==0 + && sqlite3ExprIsTableConstant(pTerm->pExpr, pSrc->iCursor) ){ + pPartial = sqlite3ExprAnd(pParse->db, pPartial, + sqlite3ExprDup(pParse->db, pTerm->pExpr, 0)); + } if( termCanDriveIndex(pTerm, pSrc, notReady) ){ int iCol = pTerm->u.leftColumn; Bitmask cMask = iCol>=BMS ? MASKBIT(BMS-1) : MASKBIT(iCol); @@ -111012,7 +116564,9 @@ sentWarning = 1; } if( (idxCols & cMask)==0 ){ - if( whereLoopResize(pParse->db, pLoop, nKeyCol+1) ) return; + if( whereLoopResize(pParse->db, pLoop, nKeyCol+1) ){ + goto end_auto_index_create; + } pLoop->aLTerm[nKeyCol++] = pTerm; idxCols |= cMask; } @@ -111032,7 +116586,7 @@ ** if they go out of sync. */ extraCols = pSrc->colUsed & (~idxCols | MASKBIT(BMS-1)); - mxBitCol = (pTable->nCol >= BMS-1) ? BMS-1 : pTable->nCol; + mxBitCol = MIN(BMS-1,pTable->nCol); testcase( pTable->nCol==BMS-1 ); testcase( pTable->nCol==BMS-2 ); for(i=0; icolUsed & MASKBIT(BMS-1) ){ nKeyCol += pTable->nCol - BMS + 1; } - pLoop->wsFlags |= WHERE_COLUMN_EQ | WHERE_IDX_ONLY; /* Construct the Index object to describe this index */ pIdx = sqlite3AllocateIndexObject(pParse->db, nKeyCol+1, 0, &zNotUsed); - if( pIdx==0 ) return; + if( pIdx==0 ) goto end_auto_index_create; pLoop->u.btree.pIndex = pIdx; pIdx->zName = "auto-index"; pIdx->pTable = pTable; @@ -111097,18 +116650,29 @@ VdbeComment((v, "for %s", pTable->zName)); /* Fill the automatic index with content */ + sqlite3ExprCachePush(pParse); addrTop = sqlite3VdbeAddOp1(v, OP_Rewind, pLevel->iTabCur); VdbeCoverage(v); + if( pPartial ){ + iContinue = sqlite3VdbeMakeLabel(v); + sqlite3ExprIfFalse(pParse, pPartial, iContinue, SQLITE_JUMPIFNULL); + pLoop->wsFlags |= WHERE_PARTIALIDX; + } regRecord = sqlite3GetTempReg(pParse); sqlite3GenerateIndexKey(pParse, pIdx, pLevel->iTabCur, regRecord, 0, 0, 0, 0); sqlite3VdbeAddOp2(v, OP_IdxInsert, pLevel->iIdxCur, regRecord); sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + if( pPartial ) sqlite3VdbeResolveLabel(v, iContinue); sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); VdbeCoverage(v); sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX); sqlite3VdbeJumpHere(v, addrTop); sqlite3ReleaseTempReg(pParse, regRecord); + sqlite3ExprCachePop(pParse); /* Jump here when skipping the initialization */ sqlite3VdbeJumpHere(v, addrInit); + +end_auto_index_create: + sqlite3ExprDelete(pParse->db, pPartial); } #endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ @@ -111268,7 +116832,6 @@ } #endif /* !defined(SQLITE_OMIT_VIRTUALTABLE) */ - #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 /* ** Estimate the location of a particular key among all keys in an @@ -111277,9 +116840,10 @@ ** aStat[0] Est. number of rows less than pVal ** aStat[1] Est. number of rows equal to pVal ** -** Return SQLITE_OK on success. +** Return the index of the sample that is the smallest sample that +** is greater than or equal to pRec. */ -static void whereKeyStats( +static int whereKeyStats( Parse *pParse, /* Database connection */ Index *pIdx, /* Index to consider domain of */ UnpackedRecord *pRec, /* Vector of values to consider */ @@ -111302,7 +116866,7 @@ assert( pRec->nField>0 && iColnSampleCol ); do{ iTest = (iMin+i)/2; - res = sqlite3VdbeRecordCompare(aSample[iTest].n, aSample[iTest].p, pRec, 0); + res = sqlite3VdbeRecordCompare(aSample[iTest].n, aSample[iTest].p, pRec); if( res<0 ){ iMin = iTest+1; }else{ @@ -111317,16 +116881,16 @@ if( res==0 ){ /* If (res==0) is true, then sample $i must be equal to pRec */ assert( inSample ); - assert( 0==sqlite3VdbeRecordCompare(aSample[i].n, aSample[i].p, pRec, 0) + assert( 0==sqlite3VdbeRecordCompare(aSample[i].n, aSample[i].p, pRec) || pParse->db->mallocFailed ); }else{ /* Otherwise, pRec must be smaller than sample $i and larger than ** sample ($i-1). */ assert( i==pIdx->nSample - || sqlite3VdbeRecordCompare(aSample[i].n, aSample[i].p, pRec, 0)>0 + || sqlite3VdbeRecordCompare(aSample[i].n, aSample[i].p, pRec)>0 || pParse->db->mallocFailed ); assert( i==0 - || sqlite3VdbeRecordCompare(aSample[i-1].n, aSample[i-1].p, pRec, 0)<0 + || sqlite3VdbeRecordCompare(aSample[i-1].n, aSample[i-1].p, pRec)<0 || pParse->db->mallocFailed ); } #endif /* ifdef SQLITE_DEBUG */ @@ -111344,10 +116908,11 @@ iLower = 0; iUpper = aSample[0].anLt[iCol]; }else{ - iUpper = i>=pIdx->nSample ? pIdx->aiRowEst[0] : aSample[i].anLt[iCol]; + i64 nRow0 = sqlite3LogEstToInt(pIdx->aiRowLogEst[0]); + iUpper = i>=pIdx->nSample ? nRow0 : aSample[i].anLt[iCol]; iLower = aSample[i-1].anEq[iCol] + aSample[i-1].anLt[iCol]; } - aStat[1] = (pIdx->nKeyCol>iCol ? pIdx->aAvgEq[iCol] : 1); + aStat[1] = pIdx->aAvgEq[iCol]; if( iLower>=iUpper ){ iGap = 0; }else{ @@ -111360,10 +116925,143 @@ } aStat[0] = iLower + iGap; } + return i; } #endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ /* +** If it is not NULL, pTerm is a term that provides an upper or lower +** bound on a range scan. Without considering pTerm, it is estimated +** that the scan will visit nNew rows. This function returns the number +** estimated to be visited after taking pTerm into account. +** +** If the user explicitly specified a likelihood() value for this term, +** then the return value is the likelihood multiplied by the number of +** input rows. Otherwise, this function assumes that an "IS NOT NULL" term +** has a likelihood of 0.50, and any other term a likelihood of 0.25. +*/ +static LogEst whereRangeAdjust(WhereTerm *pTerm, LogEst nNew){ + LogEst nRet = nNew; + if( pTerm ){ + if( pTerm->truthProb<=0 ){ + nRet += pTerm->truthProb; + }else if( (pTerm->wtFlags & TERM_VNULL)==0 ){ + nRet -= 20; assert( 20==sqlite3LogEst(4) ); + } + } + return nRet; +} + +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 +/* +** This function is called to estimate the number of rows visited by a +** range-scan on a skip-scan index. For example: +** +** CREATE INDEX i1 ON t1(a, b, c); +** SELECT * FROM t1 WHERE a=? AND c BETWEEN ? AND ?; +** +** Value pLoop->nOut is currently set to the estimated number of rows +** visited for scanning (a=? AND b=?). This function reduces that estimate +** by some factor to account for the (c BETWEEN ? AND ?) expression based +** on the stat4 data for the index. this scan will be peformed multiple +** times (once for each (a,b) combination that matches a=?) is dealt with +** by the caller. +** +** It does this by scanning through all stat4 samples, comparing values +** extracted from pLower and pUpper with the corresponding column in each +** sample. If L and U are the number of samples found to be less than or +** equal to the values extracted from pLower and pUpper respectively, and +** N is the total number of samples, the pLoop->nOut value is adjusted +** as follows: +** +** nOut = nOut * ( min(U - L, 1) / N ) +** +** If pLower is NULL, or a value cannot be extracted from the term, L is +** set to zero. If pUpper is NULL, or a value cannot be extracted from it, +** U is set to N. +** +** Normally, this function sets *pbDone to 1 before returning. However, +** if no value can be extracted from either pLower or pUpper (and so the +** estimate of the number of rows delivered remains unchanged), *pbDone +** is left as is. +** +** If an error occurs, an SQLite error code is returned. Otherwise, +** SQLITE_OK. +*/ +static int whereRangeSkipScanEst( + Parse *pParse, /* Parsing & code generating context */ + WhereTerm *pLower, /* Lower bound on the range. ex: "x>123" Might be NULL */ + WhereTerm *pUpper, /* Upper bound on the range. ex: "x<455" Might be NULL */ + WhereLoop *pLoop, /* Update the .nOut value of this loop */ + int *pbDone /* Set to true if at least one expr. value extracted */ +){ + Index *p = pLoop->u.btree.pIndex; + int nEq = pLoop->u.btree.nEq; + sqlite3 *db = pParse->db; + int nLower = -1; + int nUpper = p->nSample+1; + int rc = SQLITE_OK; + int iCol = p->aiColumn[nEq]; + u8 aff = iCol>=0 ? p->pTable->aCol[iCol].affinity : SQLITE_AFF_INTEGER; + CollSeq *pColl; + + sqlite3_value *p1 = 0; /* Value extracted from pLower */ + sqlite3_value *p2 = 0; /* Value extracted from pUpper */ + sqlite3_value *pVal = 0; /* Value extracted from record */ + + pColl = sqlite3LocateCollSeq(pParse, p->azColl[nEq]); + if( pLower ){ + rc = sqlite3Stat4ValueFromExpr(pParse, pLower->pExpr->pRight, aff, &p1); + nLower = 0; + } + if( pUpper && rc==SQLITE_OK ){ + rc = sqlite3Stat4ValueFromExpr(pParse, pUpper->pExpr->pRight, aff, &p2); + nUpper = p2 ? 0 : p->nSample; + } + + if( p1 || p2 ){ + int i; + int nDiff; + for(i=0; rc==SQLITE_OK && inSample; i++){ + rc = sqlite3Stat4Column(db, p->aSample[i].p, p->aSample[i].n, nEq, &pVal); + if( rc==SQLITE_OK && p1 ){ + int res = sqlite3MemCompare(p1, pVal, pColl); + if( res>=0 ) nLower++; + } + if( rc==SQLITE_OK && p2 ){ + int res = sqlite3MemCompare(p2, pVal, pColl); + if( res>=0 ) nUpper++; + } + } + nDiff = (nUpper - nLower); + if( nDiff<=0 ) nDiff = 1; + + /* If there is both an upper and lower bound specified, and the + ** comparisons indicate that they are close together, use the fallback + ** method (assume that the scan visits 1/64 of the rows) for estimating + ** the number of rows visited. Otherwise, estimate the number of rows + ** using the method described in the header comment for this function. */ + if( nDiff!=1 || pUpper==0 || pLower==0 ){ + int nAdjust = (sqlite3LogEst(p->nSample) - sqlite3LogEst(nDiff)); + pLoop->nOut -= nAdjust; + *pbDone = 1; + WHERETRACE(0x10, ("range skip-scan regions: %u..%u adjust=%d est=%d\n", + nLower, nUpper, nAdjust*-1, pLoop->nOut)); + } + + }else{ + assert( *pbDone==0 ); + } + + sqlite3ValueFree(p1); + sqlite3ValueFree(p2); + sqlite3ValueFree(pVal); + + return rc; +} +#endif /* SQLITE_ENABLE_STAT3_OR_STAT4 */ + +/* ** This function is used to estimate the number of rows that will be visited ** by scanning an index for a range of values. The range may have an upper ** bound, a lower bound, or both. The WHERE clause terms that set the upper @@ -111378,7 +117076,7 @@ ** If either of the upper or lower bound is not present, then NULL is passed in ** place of the corresponding WhereTerm. ** -** The value in (pBuilder->pNew->u.btree.nEq) is the index of the index +** The value in (pBuilder->pNew->u.btree.nEq) is the number of the index ** column subject to the range constraint. Or, equivalently, the number of ** equality constraints optimized by the proposed index scan. For example, ** assuming index p is on t1(a, b), and the SQL query is: @@ -111394,14 +117092,14 @@ ** ** When this function is called, *pnOut is set to the sqlite3LogEst() of the ** number of rows that the index scan is expected to visit without -** considering the range constraints. If nEq is 0, this is the number of +** considering the range constraints. If nEq is 0, then *pnOut is the number of ** rows in the index. Assuming no error occurs, *pnOut is adjusted (reduced) -** to account for the range contraints pLower and pUpper. +** to account for the range constraints pLower and pUpper. ** ** In the absence of sqlite_stat4 ANALYZE data, or if such data cannot be -** used, each range inequality reduces the search space by a factor of 4. -** Hence a pair of constraints (x>? AND x? AND xu.btree.pIndex; int nEq = pLoop->u.btree.nEq; - if( p->nSample>0 - && nEq==pBuilder->nRecValid - && nEqnSampleCol - && OptimizationEnabled(pParse->db, SQLITE_Stat3) - ){ - UnpackedRecord *pRec = pBuilder->pRec; - tRowcnt a[2]; - u8 aff; + if( p->nSample>0 && nEqnSampleCol ){ + if( nEq==pBuilder->nRecValid ){ + UnpackedRecord *pRec = pBuilder->pRec; + tRowcnt a[2]; + u8 aff; - /* Variable iLower will be set to the estimate of the number of rows in - ** the index that are less than the lower bound of the range query. The - ** lower bound being the concatenation of $P and $L, where $P is the - ** key-prefix formed by the nEq values matched against the nEq left-most - ** columns of the index, and $L is the value in pLower. - ** - ** Or, if pLower is NULL or $L cannot be extracted from it (because it - ** is not a simple variable or literal value), the lower bound of the - ** range is $P. Due to a quirk in the way whereKeyStats() works, even - ** if $L is available, whereKeyStats() is called for both ($P) and - ** ($P:$L) and the larger of the two returned values used. - ** - ** Similarly, iUpper is to be set to the estimate of the number of rows - ** less than the upper bound of the range query. Where the upper bound - ** is either ($P) or ($P:$U). Again, even if $U is available, both values - ** of iUpper are requested of whereKeyStats() and the smaller used. - */ - tRowcnt iLower; - tRowcnt iUpper; + /* Variable iLower will be set to the estimate of the number of rows in + ** the index that are less than the lower bound of the range query. The + ** lower bound being the concatenation of $P and $L, where $P is the + ** key-prefix formed by the nEq values matched against the nEq left-most + ** columns of the index, and $L is the value in pLower. + ** + ** Or, if pLower is NULL or $L cannot be extracted from it (because it + ** is not a simple variable or literal value), the lower bound of the + ** range is $P. Due to a quirk in the way whereKeyStats() works, even + ** if $L is available, whereKeyStats() is called for both ($P) and + ** ($P:$L) and the larger of the two returned values is used. + ** + ** Similarly, iUpper is to be set to the estimate of the number of rows + ** less than the upper bound of the range query. Where the upper bound + ** is either ($P) or ($P:$U). Again, even if $U is available, both values + ** of iUpper are requested of whereKeyStats() and the smaller used. + ** + ** The number of rows between the two bounds is then just iUpper-iLower. + */ + tRowcnt iLower; /* Rows less than the lower bound */ + tRowcnt iUpper; /* Rows less than the upper bound */ + int iLwrIdx = -2; /* aSample[] for the lower bound */ + int iUprIdx = -1; /* aSample[] for the upper bound */ - if( nEq==p->nKeyCol ){ - aff = SQLITE_AFF_INTEGER; - }else{ - aff = p->pTable->aCol[p->aiColumn[nEq]].affinity; - } - /* Determine iLower and iUpper using ($P) only. */ - if( nEq==0 ){ - iLower = 0; - iUpper = p->aiRowEst[0]; - }else{ - /* Note: this call could be optimized away - since the same values must - ** have been requested when testing key $P in whereEqualScanEst(). */ - whereKeyStats(pParse, p, pRec, 0, a); - iLower = a[0]; - iUpper = a[0] + a[1]; - } - - /* If possible, improve on the iLower estimate using ($P:$L). */ - if( pLower ){ - int bOk; /* True if value is extracted from pExpr */ - Expr *pExpr = pLower->pExpr->pRight; - assert( (pLower->eOperator & (WO_GT|WO_GE))!=0 ); - rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk); - if( rc==SQLITE_OK && bOk ){ - tRowcnt iNew; + if( pRec ){ + testcase( pRec->nField!=pBuilder->nRecValid ); + pRec->nField = pBuilder->nRecValid; + } + if( nEq==p->nKeyCol ){ + aff = SQLITE_AFF_INTEGER; + }else{ + aff = p->pTable->aCol[p->aiColumn[nEq]].affinity; + } + /* Determine iLower and iUpper using ($P) only. */ + if( nEq==0 ){ + iLower = 0; + iUpper = p->nRowEst0; + }else{ + /* Note: this call could be optimized away - since the same values must + ** have been requested when testing key $P in whereEqualScanEst(). */ whereKeyStats(pParse, p, pRec, 0, a); - iNew = a[0] + ((pLower->eOperator & WO_GT) ? a[1] : 0); - if( iNew>iLower ) iLower = iNew; - nOut--; + iLower = a[0]; + iUpper = a[0] + a[1]; } - } - /* If possible, improve on the iUpper estimate using ($P:$U). */ - if( pUpper ){ - int bOk; /* True if value is extracted from pExpr */ - Expr *pExpr = pUpper->pExpr->pRight; - assert( (pUpper->eOperator & (WO_LT|WO_LE))!=0 ); - rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk); - if( rc==SQLITE_OK && bOk ){ - tRowcnt iNew; - whereKeyStats(pParse, p, pRec, 1, a); - iNew = a[0] + ((pUpper->eOperator & WO_LE) ? a[1] : 0); - if( iNeweOperator & (WO_GT|WO_GE))!=0 ); + assert( pUpper==0 || (pUpper->eOperator & (WO_LT|WO_LE))!=0 ); + assert( p->aSortOrder!=0 ); + if( p->aSortOrder[nEq] ){ + /* The roles of pLower and pUpper are swapped for a DESC index */ + SWAP(WhereTerm*, pLower, pUpper); } - } - pBuilder->pRec = pRec; - if( rc==SQLITE_OK ){ - if( iUpper>iLower ){ - nNew = sqlite3LogEst(iUpper - iLower); - }else{ - nNew = 10; assert( 10==sqlite3LogEst(2) ); + /* If possible, improve on the iLower estimate using ($P:$L). */ + if( pLower ){ + int bOk; /* True if value is extracted from pExpr */ + Expr *pExpr = pLower->pExpr->pRight; + rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk); + if( rc==SQLITE_OK && bOk ){ + tRowcnt iNew; + iLwrIdx = whereKeyStats(pParse, p, pRec, 0, a); + iNew = a[0] + ((pLower->eOperator & (WO_GT|WO_LE)) ? a[1] : 0); + if( iNew>iLower ) iLower = iNew; + nOut--; + pLower = 0; + } } - if( nNewpExpr->pRight; + rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk); + if( rc==SQLITE_OK && bOk ){ + tRowcnt iNew; + iUprIdx = whereKeyStats(pParse, p, pRec, 1, a); + iNew = a[0] + ((pUpper->eOperator & (WO_GT|WO_LE)) ? a[1] : 0); + if( iNewnOut = (LogEst)nOut; - WHERETRACE(0x10, ("range scan regions: %u..%u est=%d\n", - (u32)iLower, (u32)iUpper, nOut)); - return SQLITE_OK; + + pBuilder->pRec = pRec; + if( rc==SQLITE_OK ){ + if( iUpper>iLower ){ + nNew = sqlite3LogEst(iUpper - iLower); + /* TUNING: If both iUpper and iLower are derived from the same + ** sample, then assume they are 4x more selective. This brings + ** the estimated selectivity more in line with what it would be + ** if estimated without the use of STAT3/4 tables. */ + if( iLwrIdx==iUprIdx ) nNew -= 20; assert( 20==sqlite3LogEst(4) ); + }else{ + nNew = 10; assert( 10==sqlite3LogEst(2) ); + } + if( nNewwtFlags & TERM_VNULL)==0 ){ - nNew -= 20; assert( 20==sqlite3LogEst(4) ); - nOut--; +#endif + assert( pUpper==0 || (pUpper->wtFlags & TERM_VNULL)==0 ); + nNew = whereRangeAdjust(pLower, nOut); + nNew = whereRangeAdjust(pUpper, nNew); + + /* TUNING: If there is both an upper and lower limit and neither limit + ** has an application-defined likelihood(), assume the range is + ** reduced by an additional 75%. This means that, by default, an open-ended + ** range query (e.g. col > ?) is assumed to match 1/4 of the rows in the + ** index. While a closed range (e.g. col BETWEEN ? AND ?) is estimated to + ** match 1/64 of the index. */ + if( pLower && pLower->truthProb>0 && pUpper && pUpper->truthProb>0 ){ + nNew -= 20; } - if( pUpper ){ - nNew -= 20; assert( 20==sqlite3LogEst(4) ); - nOut--; - } + + nOut -= (pLower!=0) + (pUpper!=0); if( nNew<10 ) nNew = 10; if( nNewnOut>nOut ){ + WHERETRACE(0x10,("Range scan lowers nOut from %d to %d\n", + pLoop->nOut, nOut)); + } +#endif pLoop->nOut = (LogEst)nOut; return rc; } @@ -111565,7 +117294,7 @@ int bOk; assert( nEq>=1 ); - assert( nEq<=(p->nKeyCol+1) ); + assert( nEq<=p->nColumn ); assert( p->aSample!=0 ); assert( p->nSample>0 ); assert( pBuilder->nRecValidp->nKeyCol ){ + if( nEq>=p->nColumn ){ *pnRow = 1; return SQLITE_OK; } @@ -111622,6 +117351,7 @@ tRowcnt *pnRow /* Write the revised row estimate here */ ){ Index *p = pBuilder->pNew->u.btree.pIndex; + i64 nRow0 = sqlite3LogEstToInt(p->aiRowLogEst[0]); int nRecValid = pBuilder->nRecValid; int rc = SQLITE_OK; /* Subfunction return code */ tRowcnt nEst; /* Number of rows for a single term */ @@ -111630,16 +117360,16 @@ assert( p->aSample!=0 ); for(i=0; rc==SQLITE_OK && inExpr; i++){ - nEst = p->aiRowEst[0]; + nEst = nRow0; rc = whereEqualScanEst(pParse, pBuilder, pList->a[i].pExpr, &nEst); nRowEst += nEst; pBuilder->nRecValid = nRecValid; } if( rc==SQLITE_OK ){ - if( nRowEst > p->aiRowEst[0] ) nRowEst = p->aiRowEst[0]; + if( nRowEst > nRow0 ) nRowEst = nRow0; *pnRow = nRowEst; - WHERETRACE(0x10,("IN row estimate: est=%g\n", nRowEst)); + WHERETRACE(0x10,("IN row estimate: est=%d\n", nRowEst)); } assert( pBuilder->nRecValid==nRecValid ); return rc; @@ -111771,7 +117501,7 @@ } assert( pX->op==TK_IN ); iReg = iTarget; - eType = sqlite3FindInIndex(pParse, pX, 0); + eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0); if( eType==IN_INDEX_INDEX_DESC ){ testcase( bRev ); bRev = !bRev; @@ -111876,7 +117606,7 @@ pLoop = pLevel->pWLoop; assert( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 ); nEq = pLoop->u.btree.nEq; - nSkip = pLoop->u.btree.nSkip; + nSkip = pLoop->nSkip; pIdx = pLoop->u.btree.pIndex; assert( pIdx!=0 ); @@ -111975,9 +117705,8 @@ /* ** Argument pLevel describes a strategy for scanning table pTab. This -** function returns a pointer to a string buffer containing a description -** of the subset of table rows scanned by the strategy in the form of an -** SQL expression. Or, if all rows are scanned, NULL is returned. +** function appends text to pStr that describes the subset of table +** rows scanned by the strategy in the form of an SQL expression. ** ** For example, if the query: ** @@ -111987,135 +117716,187 @@ ** string similar to: ** ** "a=? AND b>?" -** -** The returned pointer points to memory obtained from sqlite3DbMalloc(). -** It is the responsibility of the caller to free the buffer when it is -** no longer required. */ -static char *explainIndexRange(sqlite3 *db, WhereLoop *pLoop, Table *pTab){ +static void explainIndexRange(StrAccum *pStr, WhereLoop *pLoop, Table *pTab){ Index *pIndex = pLoop->u.btree.pIndex; u16 nEq = pLoop->u.btree.nEq; - u16 nSkip = pLoop->u.btree.nSkip; + u16 nSkip = pLoop->nSkip; int i, j; Column *aCol = pTab->aCol; i16 *aiColumn = pIndex->aiColumn; - StrAccum txt; - if( nEq==0 && (pLoop->wsFlags & (WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))==0 ){ - return 0; - } - sqlite3StrAccumInit(&txt, 0, 0, SQLITE_MAX_LENGTH); - txt.db = db; - sqlite3StrAccumAppend(&txt, " (", 2); + if( nEq==0 && (pLoop->wsFlags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))==0 ) return; + sqlite3StrAccumAppend(pStr, " (", 2); for(i=0; inKeyCol ) ? "rowid" : aCol[aiColumn[i]].zName; + char *z = aiColumn[i] < 0 ? "rowid" : aCol[aiColumn[i]].zName; if( i>=nSkip ){ - explainAppendTerm(&txt, i, z, "="); + explainAppendTerm(pStr, i, z, "="); }else{ - if( i ) sqlite3StrAccumAppend(&txt, " AND ", 5); - sqlite3StrAccumAppend(&txt, "ANY(", 4); - sqlite3StrAccumAppendAll(&txt, z); - sqlite3StrAccumAppend(&txt, ")", 1); + if( i ) sqlite3StrAccumAppend(pStr, " AND ", 5); + sqlite3XPrintf(pStr, 0, "ANY(%s)", z); } } j = i; if( pLoop->wsFlags&WHERE_BTM_LIMIT ){ - char *z = (j==pIndex->nKeyCol ) ? "rowid" : aCol[aiColumn[j]].zName; - explainAppendTerm(&txt, i++, z, ">"); + char *z = aiColumn[j] < 0 ? "rowid" : aCol[aiColumn[j]].zName; + explainAppendTerm(pStr, i++, z, ">"); } if( pLoop->wsFlags&WHERE_TOP_LIMIT ){ - char *z = (j==pIndex->nKeyCol ) ? "rowid" : aCol[aiColumn[j]].zName; - explainAppendTerm(&txt, i, z, "<"); + char *z = aiColumn[j] < 0 ? "rowid" : aCol[aiColumn[j]].zName; + explainAppendTerm(pStr, i, z, "<"); } - sqlite3StrAccumAppend(&txt, ")", 1); - return sqlite3StrAccumFinish(&txt); + sqlite3StrAccumAppend(pStr, ")", 1); } /* ** This function is a no-op unless currently processing an EXPLAIN QUERY PLAN -** command. If the query being compiled is an EXPLAIN QUERY PLAN, a single -** record is added to the output to describe the table scan strategy in -** pLevel. +** command, or if either SQLITE_DEBUG or SQLITE_ENABLE_STMT_SCANSTATUS was +** defined at compile-time. If it is not a no-op, a single OP_Explain opcode +** is added to the output to describe the table scan strategy in pLevel. +** +** If an OP_Explain opcode is added to the VM, its address is returned. +** Otherwise, if no OP_Explain is coded, zero is returned. */ -static void explainOneScan( +static int explainOneScan( Parse *pParse, /* Parse context */ SrcList *pTabList, /* Table list this loop refers to */ WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ int iLevel, /* Value for "level" column of output */ int iFrom, /* Value for "from" column of output */ u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ ){ -#ifndef SQLITE_DEBUG + int ret = 0; +#if !defined(SQLITE_DEBUG) && !defined(SQLITE_ENABLE_STMT_SCANSTATUS) if( pParse->explain==2 ) #endif { struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom]; Vdbe *v = pParse->pVdbe; /* VM being constructed */ sqlite3 *db = pParse->db; /* Database handle */ - char *zMsg; /* Text to add to EQP output */ int iId = pParse->iSelectId; /* Select id (left-most output column) */ int isSearch; /* True for a SEARCH. False for SCAN. */ WhereLoop *pLoop; /* The controlling WhereLoop object */ u32 flags; /* Flags that describe this loop */ + char *zMsg; /* Text to add to EQP output */ + StrAccum str; /* EQP output string */ + char zBuf[100]; /* Initial space for EQP output string */ pLoop = pLevel->pWLoop; flags = pLoop->wsFlags; - if( (flags&WHERE_MULTI_OR) || (wctrlFlags&WHERE_ONETABLE_ONLY) ) return; + if( (flags&WHERE_MULTI_OR) || (wctrlFlags&WHERE_ONETABLE_ONLY) ) return 0; isSearch = (flags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))!=0 || ((flags&WHERE_VIRTUALTABLE)==0 && (pLoop->u.btree.nEq>0)) || (wctrlFlags&(WHERE_ORDERBY_MIN|WHERE_ORDERBY_MAX)); - zMsg = sqlite3MPrintf(db, "%s", isSearch?"SEARCH":"SCAN"); + sqlite3StrAccumInit(&str, zBuf, sizeof(zBuf), SQLITE_MAX_LENGTH); + str.db = db; + sqlite3StrAccumAppendAll(&str, isSearch ? "SEARCH" : "SCAN"); if( pItem->pSelect ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s SUBQUERY %d", zMsg,pItem->iSelectId); + sqlite3XPrintf(&str, 0, " SUBQUERY %d", pItem->iSelectId); }else{ - zMsg = sqlite3MAppendf(db, zMsg, "%s TABLE %s", zMsg, pItem->zName); + sqlite3XPrintf(&str, 0, " TABLE %s", pItem->zName); } if( pItem->zAlias ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s AS %s", zMsg, pItem->zAlias); + sqlite3XPrintf(&str, 0, " AS %s", pItem->zAlias); } - if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 - && ALWAYS(pLoop->u.btree.pIndex!=0) - ){ - char *zWhere = explainIndexRange(db, pLoop, pItem->pTab); - zMsg = sqlite3MAppendf(db, zMsg, - ((flags & WHERE_AUTO_INDEX) ? - "%s USING AUTOMATIC %sINDEX%.0s%s" : - "%s USING %sINDEX %s%s"), - zMsg, ((flags & WHERE_IDX_ONLY) ? "COVERING " : ""), - pLoop->u.btree.pIndex->zName, zWhere); - sqlite3DbFree(db, zWhere); - }else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s USING INTEGER PRIMARY KEY", zMsg); + if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 ){ + const char *zFmt = 0; + Index *pIdx; + assert( pLoop->u.btree.pIndex!=0 ); + pIdx = pLoop->u.btree.pIndex; + assert( !(flags&WHERE_AUTO_INDEX) || (flags&WHERE_IDX_ONLY) ); + if( !HasRowid(pItem->pTab) && IsPrimaryKeyIndex(pIdx) ){ + if( isSearch ){ + zFmt = "PRIMARY KEY"; + } + }else if( flags & WHERE_PARTIALIDX ){ + zFmt = "AUTOMATIC PARTIAL COVERING INDEX"; + }else if( flags & WHERE_AUTO_INDEX ){ + zFmt = "AUTOMATIC COVERING INDEX"; + }else if( flags & WHERE_IDX_ONLY ){ + zFmt = "COVERING INDEX %s"; + }else{ + zFmt = "INDEX %s"; + } + if( zFmt ){ + sqlite3StrAccumAppend(&str, " USING ", 7); + sqlite3XPrintf(&str, 0, zFmt, pIdx->zName); + explainIndexRange(&str, pLoop, pItem->pTab); + } + }else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){ + const char *zRange; if( flags&(WHERE_COLUMN_EQ|WHERE_COLUMN_IN) ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s (rowid=?)", zMsg); + zRange = "(rowid=?)"; }else if( (flags&WHERE_BOTH_LIMIT)==WHERE_BOTH_LIMIT ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s (rowid>? AND rowid? AND rowid?)", zMsg); - }else if( ALWAYS(flags&WHERE_TOP_LIMIT) ){ - zMsg = sqlite3MAppendf(db, zMsg, "%s (rowid?)"; + }else{ + assert( flags&WHERE_TOP_LIMIT); + zRange = "(rowidu.vtab.idxNum, pLoop->u.vtab.idxStr); } #endif - zMsg = sqlite3MAppendf(db, zMsg, "%s", zMsg); - sqlite3VdbeAddOp4(v, OP_Explain, iId, iLevel, iFrom, zMsg, P4_DYNAMIC); +#ifdef SQLITE_EXPLAIN_ESTIMATED_ROWS + if( pLoop->nOut>=10 ){ + sqlite3XPrintf(&str, 0, " (~%llu rows)", sqlite3LogEstToInt(pLoop->nOut)); + }else{ + sqlite3StrAccumAppend(&str, " (~1 row)", 9); + } +#endif + zMsg = sqlite3StrAccumFinish(&str); + ret = sqlite3VdbeAddOp4(v, OP_Explain, iId, iLevel, iFrom, zMsg,P4_DYNAMIC); } + return ret; } #else -# define explainOneScan(u,v,w,x,y,z) +# define explainOneScan(u,v,w,x,y,z) 0 #endif /* SQLITE_OMIT_EXPLAIN */ +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS +/* +** Configure the VM passed as the first argument with an +** sqlite3_stmt_scanstatus() entry corresponding to the scan used to +** implement level pLvl. Argument pSrclist is a pointer to the FROM +** clause that the scan reads data from. +** +** If argument addrExplain is not 0, it must be the address of an +** OP_Explain instruction that describes the same loop. +*/ +static void addScanStatus( + Vdbe *v, /* Vdbe to add scanstatus entry to */ + SrcList *pSrclist, /* FROM clause pLvl reads data from */ + WhereLevel *pLvl, /* Level to add scanstatus() entry for */ + int addrExplain /* Address of OP_Explain (or 0) */ +){ + const char *zObj = 0; + WhereLoop *pLoop = pLvl->pWLoop; + if( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 && pLoop->u.btree.pIndex!=0 ){ + zObj = pLoop->u.btree.pIndex->zName; + }else{ + zObj = pSrclist->a[pLvl->iFrom].zName; + } + sqlite3VdbeScanStatus( + v, addrExplain, pLvl->addrBody, pLvl->addrVisit, pLoop->nOut, zObj + ); +} +#else +# define addScanStatus(a, b, c, d) ((void)d) +#endif + + /* ** Generate code for the start of the iLevel-th loop in the WHERE clause ** implementation described by pWInfo. @@ -112229,7 +118010,7 @@ pLevel->p1 = iCur; pLevel->p2 = sqlite3VdbeCurrentAddr(v); sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2); - sqlite3ExprCachePop(pParse, 1); + sqlite3ExprCachePop(pParse); }else #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -112415,7 +118196,7 @@ pIdx = pLoop->u.btree.pIndex; iIdxCur = pLevel->iIdxCur; - assert( nEq>=pLoop->u.btree.nSkip ); + assert( nEq>=pLoop->nSkip ); /* If this loop satisfies a sort order (pOrderBy) request that ** was passed to this function to implement a "SELECT min(x) ..." @@ -112425,11 +118206,14 @@ ** the first one after the nEq equality constraints in the index, ** this requires some special handling. */ + assert( pWInfo->pOrderBy==0 + || pWInfo->pOrderBy->nExpr==1 + || (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)==0 ); if( (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)!=0 - && (pWInfo->bOBSat!=0) + && pWInfo->nOBSat>0 && (pIdx->nKeyCol>nEq) ){ - assert( pLoop->u.btree.nSkip==0 ); + assert( pLoop->nSkip==0 ); bSeekPastNull = 1; nExtraReg = 1; } @@ -112575,7 +118359,7 @@ sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg); sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg); /* Deferred seek */ - }else{ + }else if( iCur!=iIdxCur ){ Index *pPk = sqlite3PrimaryKeyIndex(pIdx->pTable); iRowidReg = sqlite3GetTempRange(pParse, pPk->nKeyCol); for(j=0; jnKeyCol; j++){ @@ -112597,8 +118381,7 @@ pLevel->op = OP_Next; } pLevel->p1 = iIdxCur; - assert( (WHERE_UNQ_WANTED>>16)==1 ); - pLevel->p3 = (pLoop->wsFlags>>16)&1; + pLevel->p3 = (pLoop->wsFlags&WHERE_UNQ_WANTED)!=0 ? 1:0; if( (pLoop->wsFlags & WHERE_CONSTRAINT)==0 ){ pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP; }else{ @@ -112646,6 +118429,10 @@ ** ** B: ** + ** Added 2014-05-26: If the table is a WITHOUT ROWID table, then + ** use an ephemeral index instead of a RowSet to record the primary + ** keys of the rows we have already seen. + ** */ WhereClause *pOrWc; /* The OR-clause broken out into subterms */ SrcList *pOrTab; /* Shortened table list or OR-clause generation */ @@ -112659,7 +118446,9 @@ int iRetInit; /* Address of regReturn init */ int untestedTerms = 0; /* Some terms not completely tested */ int ii; /* Loop counter */ + u16 wctrlFlags; /* Flags for sub-WHERE clause */ Expr *pAndExpr = 0; /* An ".. AND (...)" expression */ + Table *pTab = pTabItem->pTab; pTerm = pLoop->aLTerm[0]; assert( pTerm!=0 ); @@ -112692,7 +118481,8 @@ } /* Initialize the rowset register to contain NULL. An SQL NULL is - ** equivalent to an empty rowset. + ** equivalent to an empty rowset. Or, create an ephemeral index + ** capable of holding primary keys in the case of a WITHOUT ROWID. ** ** Also initialize regReturn to contain the address of the instruction ** immediately following the OP_Return at the bottom of the loop. This @@ -112703,9 +118493,16 @@ ** called on an uninitialized cursor. */ if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ - regRowset = ++pParse->nMem; + if( HasRowid(pTab) ){ + regRowset = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + regRowset = pParse->nTab++; + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, regRowset, pPk->nKeyCol); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); + } regRowid = ++pParse->nMem; - sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset); } iRetInit = sqlite3VdbeAddOp2(v, OP_Integer, 0, regReturn); @@ -112729,10 +118526,9 @@ Expr *pExpr = pWC->a[iTerm].pExpr; if( &pWC->a[iTerm] == pTerm ) continue; if( ExprHasProperty(pExpr, EP_FromJoin) ) continue; - testcase( pWC->a[iTerm].wtFlags & TERM_ORINFO ); - testcase( pWC->a[iTerm].wtFlags & TERM_VIRTUAL ); - if( pWC->a[iTerm].wtFlags & (TERM_ORINFO|TERM_VIRTUAL) ) continue; + if( (pWC->a[iTerm].wtFlags & TERM_VIRTUAL)!=0 ) continue; if( (pWC->a[iTerm].eOperator & WO_ALL)==0 ) continue; + testcase( pWC->a[iTerm].wtFlags & TERM_ORINFO ); pExpr = sqlite3ExprDup(db, pExpr, 0); pAndExpr = sqlite3ExprAnd(db, pAndExpr, pExpr); } @@ -112741,36 +118537,92 @@ } } + /* Run a separate WHERE clause for each term of the OR clause. After + ** eliminating duplicates from other WHERE clauses, the action for each + ** sub-WHERE clause is to to invoke the main loop body as a subroutine. + */ + wctrlFlags = WHERE_OMIT_OPEN_CLOSE + | WHERE_FORCE_TABLE + | WHERE_ONETABLE_ONLY; for(ii=0; iinTerm; ii++){ WhereTerm *pOrTerm = &pOrWc->a[ii]; if( pOrTerm->leftCursor==iCur || (pOrTerm->eOperator & WO_AND)!=0 ){ - WhereInfo *pSubWInfo; /* Info for single OR-term scan */ - Expr *pOrExpr = pOrTerm->pExpr; + WhereInfo *pSubWInfo; /* Info for single OR-term scan */ + Expr *pOrExpr = pOrTerm->pExpr; /* Current OR clause term */ + int j1 = 0; /* Address of jump operation */ if( pAndExpr && !ExprHasProperty(pOrExpr, EP_FromJoin) ){ pAndExpr->pLeft = pOrExpr; pOrExpr = pAndExpr; } /* Loop through table entries that match term pOrTerm. */ + WHERETRACE(0xffff, ("Subplan for OR-clause:\n")); pSubWInfo = sqlite3WhereBegin(pParse, pOrTab, pOrExpr, 0, 0, - WHERE_OMIT_OPEN_CLOSE | WHERE_AND_ONLY | - WHERE_FORCE_TABLE | WHERE_ONETABLE_ONLY, iCovCur); + wctrlFlags, iCovCur); assert( pSubWInfo || pParse->nErr || db->mallocFailed ); if( pSubWInfo ){ WhereLoop *pSubLoop; - explainOneScan( + int addrExplain = explainOneScan( pParse, pOrTab, &pSubWInfo->a[0], iLevel, pLevel->iFrom, 0 ); + addScanStatus(v, pOrTab, &pSubWInfo->a[0], addrExplain); + + /* This is the sub-WHERE clause body. First skip over + ** duplicate rows from prior sub-WHERE clauses, and record the + ** rowid (or PRIMARY KEY) for the current row so that the same + ** row will be skipped in subsequent sub-WHERE clauses. + */ if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ - int iSet = ((ii==pOrWc->nTerm-1)?-1:ii); int r; - r = sqlite3ExprCodeGetColumn(pParse, pTabItem->pTab, -1, iCur, - regRowid, 0); - sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset, - sqlite3VdbeCurrentAddr(v)+2, r, iSet); - VdbeCoverage(v); + int iSet = ((ii==pOrWc->nTerm-1)?-1:ii); + if( HasRowid(pTab) ){ + r = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iCur, regRowid, 0); + j1 = sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset, 0, r,iSet); + VdbeCoverage(v); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + int nPk = pPk->nKeyCol; + int iPk; + + /* Read the PK into an array of temp registers. */ + r = sqlite3GetTempRange(pParse, nPk); + for(iPk=0; iPkaiColumn[iPk]; + sqlite3ExprCodeGetColumn(pParse, pTab, iCol, iCur, r+iPk, 0); + } + + /* Check if the temp table already contains this key. If so, + ** the row has already been included in the result set and + ** can be ignored (by jumping past the Gosub below). Otherwise, + ** insert the key into the temp table and proceed with processing + ** the row. + ** + ** Use some of the same optimizations as OP_RowSetTest: If iSet + ** is zero, assume that the key cannot already be present in + ** the temp table. And if iSet is -1, assume that there is no + ** need to insert the key into the temp table, as it will never + ** be tested for. */ + if( iSet ){ + j1 = sqlite3VdbeAddOp4Int(v, OP_Found, regRowset, 0, r, nPk); + VdbeCoverage(v); + } + if( iSet>=0 ){ + sqlite3VdbeAddOp3(v, OP_MakeRecord, r, nPk, regRowid); + sqlite3VdbeAddOp3(v, OP_IdxInsert, regRowset, regRowid, 0); + if( iSet ) sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); + } + + /* Release the array of temp registers */ + sqlite3ReleaseTempRange(pParse, r, nPk); + } } + + /* Invoke the main loop body as a subroutine */ sqlite3VdbeAddOp2(v, OP_Gosub, regReturn, iLoopBody); + /* Jump here (skipping the main loop body subroutine) if the + ** current sub-WHERE row is a duplicate from prior sub-WHEREs. */ + if( j1 ) sqlite3VdbeJumpHere(v, j1); + /* The pSubWInfo->untestedTerms flag means that this OR term ** contained one or more AND term from a notReady table. The ** terms from the notReady table could not be tested and will @@ -112794,9 +118646,11 @@ assert( (pSubLoop->wsFlags & WHERE_AUTO_INDEX)==0 ); if( (pSubLoop->wsFlags & WHERE_INDEXED)!=0 && (ii==0 || pSubLoop->u.btree.pIndex==pCov) + && (HasRowid(pTab) || !IsPrimaryKeyIndex(pSubLoop->u.btree.pIndex)) ){ assert( pSubWInfo->a[0].iIdxCur==iCovCur ); pCov = pSubLoop->u.btree.pIndex; + wctrlFlags |= WHERE_REOPEN_IDX; }else{ pCov = 0; } @@ -112842,6 +118696,10 @@ } } +#ifdef SQLITE_ENABLE_STMT_SCANSTATUS + pLevel->addrVisit = sqlite3VdbeCurrentAddr(v); +#endif + /* Insert code to test every subexpression that can be completely ** computed using the current set of tables. */ @@ -112923,22 +118781,27 @@ return pLevel->notReady; } -#if defined(WHERETRACE_ENABLED) && defined(SQLITE_ENABLE_TREE_EXPLAIN) +#ifdef WHERETRACE_ENABLED /* -** Generate "Explanation" text for a WhereTerm. +** Print the content of a WhereTerm object */ -static void whereExplainTerm(Vdbe *v, WhereTerm *pTerm){ - char zType[4]; - memcpy(zType, "...", 4); - if( pTerm->wtFlags & TERM_VIRTUAL ) zType[0] = 'V'; - if( pTerm->eOperator & WO_EQUIV ) zType[1] = 'E'; - if( ExprHasProperty(pTerm->pExpr, EP_FromJoin) ) zType[2] = 'L'; - sqlite3ExplainPrintf(v, "%s ", zType); - sqlite3ExplainExpr(v, pTerm->pExpr); +static void whereTermPrint(WhereTerm *pTerm, int iTerm){ + if( pTerm==0 ){ + sqlite3DebugPrintf("TERM-%-3d NULL\n", iTerm); + }else{ + char zType[4]; + memcpy(zType, "...", 4); + if( pTerm->wtFlags & TERM_VIRTUAL ) zType[0] = 'V'; + if( pTerm->eOperator & WO_EQUIV ) zType[1] = 'E'; + if( ExprHasProperty(pTerm->pExpr, EP_FromJoin) ) zType[2] = 'L'; + sqlite3DebugPrintf("TERM-%-3d %p %s cursor=%-3d prob=%-3d op=0x%03x\n", + iTerm, pTerm, zType, pTerm->leftCursor, pTerm->truthProb, + pTerm->eOperator); + sqlite3TreeViewExpr(0, pTerm->pExpr, 0); + } } -#endif /* WHERETRACE_ENABLED && SQLITE_ENABLE_TREE_EXPLAIN */ +#endif - #ifdef WHERETRACE_ENABLED /* ** Print a WhereLoop object for debugging purposes @@ -112953,8 +118816,8 @@ sqlite3DebugPrintf(" %12s", pItem->zAlias ? pItem->zAlias : pTab->zName); if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){ - const char *zName; - if( p->u.btree.pIndex && (zName = p->u.btree.pIndex->zName)!=0 ){ + const char *zName; + if( p->u.btree.pIndex && (zName = p->u.btree.pIndex->zName)!=0 ){ if( strncmp(zName, "sqlite_autoindex_", 17)==0 ){ int i = sqlite3Strlen30(zName) - 1; while( zName[i]!='_' ) i--; @@ -112975,29 +118838,18 @@ sqlite3DebugPrintf(" %-19s", z); sqlite3_free(z); } - sqlite3DebugPrintf(" f %04x N %d", p->wsFlags, p->nLTerm); + if( p->wsFlags & WHERE_SKIPSCAN ){ + sqlite3DebugPrintf(" f %05x %d-%d", p->wsFlags, p->nLTerm,p->nSkip); + }else{ + sqlite3DebugPrintf(" f %05x N %d", p->wsFlags, p->nLTerm); + } sqlite3DebugPrintf(" cost %d,%d,%d\n", p->rSetup, p->rRun, p->nOut); -#ifdef SQLITE_ENABLE_TREE_EXPLAIN - /* If the 0x100 bit of wheretracing is set, then show all of the constraint - ** expressions in the WhereLoop.aLTerm[] array. - */ - if( p->nLTerm && (sqlite3WhereTrace & 0x100)!=0 ){ /* WHERETRACE 0x100 */ + if( p->nLTerm && (sqlite3WhereTrace & 0x100)!=0 ){ int i; - Vdbe *v = pWInfo->pParse->pVdbe; - sqlite3ExplainBegin(v); for(i=0; inLTerm; i++){ - WhereTerm *pTerm = p->aLTerm[i]; - if( pTerm==0 ) continue; - sqlite3ExplainPrintf(v, " (%d) #%-2d ", i+1, (int)(pTerm-pWC->a)); - sqlite3ExplainPush(v); - whereExplainTerm(v, pTerm); - sqlite3ExplainPop(v); - sqlite3ExplainNL(v); + whereTermPrint(p->aLTerm[i], i); } - sqlite3ExplainFinish(v); - sqlite3DebugPrintf("%s", sqlite3VdbeExplanation(v)); } -#endif } #endif @@ -113023,7 +118875,6 @@ p->u.vtab.idxStr = 0; }else if( (p->wsFlags & WHERE_AUTO_INDEX)!=0 && p->u.btree.pIndex!=0 ){ sqlite3DbFree(db, p->u.btree.pIndex->zColAff); - sqlite3KeyInfoUnref(p->u.btree.pIndex->pKeyInfo); sqlite3DbFree(db, p->u.btree.pIndex); p->u.btree.pIndex = 0; } @@ -113098,6 +118949,160 @@ } /* +** Return TRUE if all of the following are true: +** +** (1) X has the same or lower cost that Y +** (2) X is a proper subset of Y +** (3) X skips at least as many columns as Y +** +** By "proper subset" we mean that X uses fewer WHERE clause terms +** than Y and that every WHERE clause term used by X is also used +** by Y. +** +** If X is a proper subset of Y then Y is a better choice and ought +** to have a lower cost. This routine returns TRUE when that cost +** relationship is inverted and needs to be adjusted. The third rule +** was added because if X uses skip-scan less than Y it still might +** deserve a lower cost even if it is a proper subset of Y. +*/ +static int whereLoopCheaperProperSubset( + const WhereLoop *pX, /* First WhereLoop to compare */ + const WhereLoop *pY /* Compare against this WhereLoop */ +){ + int i, j; + if( pX->nLTerm-pX->nSkip >= pY->nLTerm-pY->nSkip ){ + return 0; /* X is not a subset of Y */ + } + if( pY->nSkip > pX->nSkip ) return 0; + if( pX->rRun >= pY->rRun ){ + if( pX->rRun > pY->rRun ) return 0; /* X costs more than Y */ + if( pX->nOut > pY->nOut ) return 0; /* X costs more than Y */ + } + for(i=pX->nLTerm-1; i>=0; i--){ + if( pX->aLTerm[i]==0 ) continue; + for(j=pY->nLTerm-1; j>=0; j--){ + if( pY->aLTerm[j]==pX->aLTerm[i] ) break; + } + if( j<0 ) return 0; /* X not a subset of Y since term X[i] not used by Y */ + } + return 1; /* All conditions meet */ +} + +/* +** Try to adjust the cost of WhereLoop pTemplate upwards or downwards so +** that: +** +** (1) pTemplate costs less than any other WhereLoops that are a proper +** subset of pTemplate +** +** (2) pTemplate costs more than any other WhereLoops for which pTemplate +** is a proper subset. +** +** To say "WhereLoop X is a proper subset of Y" means that X uses fewer +** WHERE clause terms than Y and that every WHERE clause term used by X is +** also used by Y. +*/ +static void whereLoopAdjustCost(const WhereLoop *p, WhereLoop *pTemplate){ + if( (pTemplate->wsFlags & WHERE_INDEXED)==0 ) return; + for(; p; p=p->pNextLoop){ + if( p->iTab!=pTemplate->iTab ) continue; + if( (p->wsFlags & WHERE_INDEXED)==0 ) continue; + if( whereLoopCheaperProperSubset(p, pTemplate) ){ + /* Adjust pTemplate cost downward so that it is cheaper than its + ** subset p. */ + WHERETRACE(0x80,("subset cost adjustment %d,%d to %d,%d\n", + pTemplate->rRun, pTemplate->nOut, p->rRun, p->nOut-1)); + pTemplate->rRun = p->rRun; + pTemplate->nOut = p->nOut - 1; + }else if( whereLoopCheaperProperSubset(pTemplate, p) ){ + /* Adjust pTemplate cost upward so that it is costlier than p since + ** pTemplate is a proper subset of p */ + WHERETRACE(0x80,("subset cost adjustment %d,%d to %d,%d\n", + pTemplate->rRun, pTemplate->nOut, p->rRun, p->nOut+1)); + pTemplate->rRun = p->rRun; + pTemplate->nOut = p->nOut + 1; + } + } +} + +/* +** Search the list of WhereLoops in *ppPrev looking for one that can be +** supplanted by pTemplate. +** +** Return NULL if the WhereLoop list contains an entry that can supplant +** pTemplate, in other words if pTemplate does not belong on the list. +** +** If pX is a WhereLoop that pTemplate can supplant, then return the +** link that points to pX. +** +** If pTemplate cannot supplant any existing element of the list but needs +** to be added to the list, then return a pointer to the tail of the list. +*/ +static WhereLoop **whereLoopFindLesser( + WhereLoop **ppPrev, + const WhereLoop *pTemplate +){ + WhereLoop *p; + for(p=(*ppPrev); p; ppPrev=&p->pNextLoop, p=*ppPrev){ + if( p->iTab!=pTemplate->iTab || p->iSortIdx!=pTemplate->iSortIdx ){ + /* If either the iTab or iSortIdx values for two WhereLoop are different + ** then those WhereLoops need to be considered separately. Neither is + ** a candidate to replace the other. */ + continue; + } + /* In the current implementation, the rSetup value is either zero + ** or the cost of building an automatic index (NlogN) and the NlogN + ** is the same for compatible WhereLoops. */ + assert( p->rSetup==0 || pTemplate->rSetup==0 + || p->rSetup==pTemplate->rSetup ); + + /* whereLoopAddBtree() always generates and inserts the automatic index + ** case first. Hence compatible candidate WhereLoops never have a larger + ** rSetup. Call this SETUP-INVARIANT */ + assert( p->rSetup>=pTemplate->rSetup ); + + /* Any loop using an appliation-defined index (or PRIMARY KEY or + ** UNIQUE constraint) with one or more == constraints is better + ** than an automatic index. Unless it is a skip-scan. */ + if( (p->wsFlags & WHERE_AUTO_INDEX)!=0 + && (pTemplate->nSkip)==0 + && (pTemplate->wsFlags & WHERE_INDEXED)!=0 + && (pTemplate->wsFlags & WHERE_COLUMN_EQ)!=0 + && (p->prereq & pTemplate->prereq)==pTemplate->prereq + ){ + break; + } + + /* If existing WhereLoop p is better than pTemplate, pTemplate can be + ** discarded. WhereLoop p is better if: + ** (1) p has no more dependencies than pTemplate, and + ** (2) p has an equal or lower cost than pTemplate + */ + if( (p->prereq & pTemplate->prereq)==p->prereq /* (1) */ + && p->rSetup<=pTemplate->rSetup /* (2a) */ + && p->rRun<=pTemplate->rRun /* (2b) */ + && p->nOut<=pTemplate->nOut /* (2c) */ + ){ + return 0; /* Discard pTemplate */ + } + + /* If pTemplate is always better than p, then cause p to be overwritten + ** with pTemplate. pTemplate is better than p if: + ** (1) pTemplate has no more dependences than p, and + ** (2) pTemplate has an equal or lower cost than p. + */ + if( (p->prereq & pTemplate->prereq)==pTemplate->prereq /* (1) */ + && p->rRun>=pTemplate->rRun /* (2a) */ + && p->nOut>=pTemplate->nOut /* (2b) */ + ){ + assert( p->rSetup>=pTemplate->rSetup ); /* SETUP-INVARIANT above */ + break; /* Cause p to be overwritten by pTemplate */ + } + } + return ppPrev; +} + +/* ** Insert or replace a WhereLoop entry using the template supplied. ** ** An existing WhereLoop entry might be overwritten if the new template @@ -113106,25 +119111,23 @@ ** fewer dependencies than the template. Otherwise a new WhereLoop is ** added based on the template. ** -** If pBuilder->pOrSet is not NULL then we only care about only the +** If pBuilder->pOrSet is not NULL then we care about only the ** prerequisites and rRun and nOut costs of the N best loops. That ** information is gathered in the pBuilder->pOrSet object. This special ** processing mode is used only for OR clause processing. ** ** When accumulating multiple loops (when pBuilder->pOrSet is NULL) we ** still might overwrite similar loops with the new template if the -** template is better. Loops may be overwritten if the following +** new template is better. Loops may be overwritten if the following ** conditions are met: ** ** (1) They have the same iTab. ** (2) They have the same iSortIdx. ** (3) The template has same or fewer dependencies than the current loop ** (4) The template has the same or lower cost than the current loop -** (5) The template uses more terms of the same index but has no additional -** dependencies */ static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){ - WhereLoop **ppPrev, *p, *pNext = 0; + WhereLoop **ppPrev, *p; WhereInfo *pWInfo = pBuilder->pWInfo; sqlite3 *db = pWInfo->pParse->db; @@ -113147,64 +119150,23 @@ return SQLITE_OK; } - /* Search for an existing WhereLoop to overwrite, or which takes - ** priority over pTemplate. + /* Look for an existing WhereLoop to replace with pTemplate */ - for(ppPrev=&pWInfo->pLoops, p=*ppPrev; p; ppPrev=&p->pNextLoop, p=*ppPrev){ - if( p->iTab!=pTemplate->iTab || p->iSortIdx!=pTemplate->iSortIdx ){ - /* If either the iTab or iSortIdx values for two WhereLoop are different - ** then those WhereLoops need to be considered separately. Neither is - ** a candidate to replace the other. */ - continue; - } - /* In the current implementation, the rSetup value is either zero - ** or the cost of building an automatic index (NlogN) and the NlogN - ** is the same for compatible WhereLoops. */ - assert( p->rSetup==0 || pTemplate->rSetup==0 - || p->rSetup==pTemplate->rSetup ); + whereLoopAdjustCost(pWInfo->pLoops, pTemplate); + ppPrev = whereLoopFindLesser(&pWInfo->pLoops, pTemplate); - /* whereLoopAddBtree() always generates and inserts the automatic index - ** case first. Hence compatible candidate WhereLoops never have a larger - ** rSetup. Call this SETUP-INVARIANT */ - assert( p->rSetup>=pTemplate->rSetup ); - - if( (p->prereq & pTemplate->prereq)==p->prereq - && p->rSetup<=pTemplate->rSetup - && p->rRun<=pTemplate->rRun - && p->nOut<=pTemplate->nOut - ){ - /* This branch taken when p is equal or better than pTemplate in - ** all of (1) dependencies (2) setup-cost, (3) run-cost, and - ** (4) number of output rows. */ - assert( p->rSetup==pTemplate->rSetup ); - if( p->prereq==pTemplate->prereq - && p->nLTermnLTerm - && (p->wsFlags & pTemplate->wsFlags & WHERE_INDEXED)!=0 - && (p->u.btree.pIndex==pTemplate->u.btree.pIndex - || pTemplate->rRun+p->nLTerm<=p->rRun+pTemplate->nLTerm) - ){ - /* Overwrite an existing WhereLoop with an similar one that uses - ** more terms of the index */ - pNext = p->pNextLoop; - break; - }else{ - /* pTemplate is not helpful. - ** Return without changing or adding anything */ - goto whereLoopInsert_noop; - } + if( ppPrev==0 ){ + /* There already exists a WhereLoop on the list that is better + ** than pTemplate, so just ignore pTemplate */ +#if WHERETRACE_ENABLED /* 0x8 */ + if( sqlite3WhereTrace & 0x8 ){ + sqlite3DebugPrintf(" skip: "); + whereLoopPrint(pTemplate, pBuilder->pWC); } - if( (p->prereq & pTemplate->prereq)==pTemplate->prereq - && p->rRun>=pTemplate->rRun - && p->nOut>=pTemplate->nOut - ){ - /* Overwrite an existing WhereLoop with a better one: one that is - ** better at one of (1) dependencies, (2) setup-cost, (3) run-cost - ** or (4) number of output rows, and is no worse in any of those - ** categories. */ - assert( p->rSetup>=pTemplate->rSetup ); /* SETUP-INVARIANT above */ - pNext = p->pNextLoop; - break; - } +#endif + return SQLITE_OK; + }else{ + p = *ppPrev; } /* If we reach this point it means that either p[] should be overwritten @@ -113214,57 +119176,90 @@ #if WHERETRACE_ENABLED /* 0x8 */ if( sqlite3WhereTrace & 0x8 ){ if( p!=0 ){ - sqlite3DebugPrintf("ins-del: "); + sqlite3DebugPrintf("replace: "); whereLoopPrint(p, pBuilder->pWC); } - sqlite3DebugPrintf("ins-new: "); + sqlite3DebugPrintf(" add: "); whereLoopPrint(pTemplate, pBuilder->pWC); } #endif if( p==0 ){ - p = sqlite3DbMallocRaw(db, sizeof(WhereLoop)); + /* Allocate a new WhereLoop to add to the end of the list */ + *ppPrev = p = sqlite3DbMallocRaw(db, sizeof(WhereLoop)); if( p==0 ) return SQLITE_NOMEM; whereLoopInit(p); + p->pNextLoop = 0; + }else{ + /* We will be overwriting WhereLoop p[]. But before we do, first + ** go through the rest of the list and delete any other entries besides + ** p[] that are also supplated by pTemplate */ + WhereLoop **ppTail = &p->pNextLoop; + WhereLoop *pToDel; + while( *ppTail ){ + ppTail = whereLoopFindLesser(ppTail, pTemplate); + if( ppTail==0 ) break; + pToDel = *ppTail; + if( pToDel==0 ) break; + *ppTail = pToDel->pNextLoop; +#if WHERETRACE_ENABLED /* 0x8 */ + if( sqlite3WhereTrace & 0x8 ){ + sqlite3DebugPrintf(" delete: "); + whereLoopPrint(pToDel, pBuilder->pWC); + } +#endif + whereLoopDelete(db, pToDel); + } } whereLoopXfer(db, p, pTemplate); - p->pNextLoop = pNext; - *ppPrev = p; if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){ Index *pIndex = p->u.btree.pIndex; if( pIndex && pIndex->tnum==0 ){ p->u.btree.pIndex = 0; } } return SQLITE_OK; - - /* Jump here if the insert is a no-op */ -whereLoopInsert_noop: -#if WHERETRACE_ENABLED /* 0x8 */ - if( sqlite3WhereTrace & 0x8 ){ - sqlite3DebugPrintf("ins-noop: "); - whereLoopPrint(pTemplate, pBuilder->pWC); - } -#endif - return SQLITE_OK; } /* ** Adjust the WhereLoop.nOut value downward to account for terms of the ** WHERE clause that reference the loop but which are not used by an ** index. +* +** For every WHERE clause term that is not used by the index +** and which has a truth probability assigned by one of the likelihood(), +** likely(), or unlikely() SQL functions, reduce the estimated number +** of output rows by the probability specified. ** -** In the current implementation, the first extra WHERE clause term reduces -** the number of output rows by a factor of 10 and each additional term -** reduces the number of output rows by sqrt(2). +** TUNING: For every WHERE clause term that is not used by the index +** and which does not have an assigned truth probability, heuristics +** described below are used to try to estimate the truth probability. +** TODO --> Perhaps this is something that could be improved by better +** table statistics. +** +** Heuristic 1: Estimate the truth probability as 93.75%. The 93.75% +** value corresponds to -1 in LogEst notation, so this means decrement +** the WhereLoop.nOut field for every such WHERE clause term. +** +** Heuristic 2: If there exists one or more WHERE clause terms of the +** form "x==EXPR" and EXPR is not a constant 0 or 1, then make sure the +** final output row estimate is no greater than 1/4 of the total number +** of rows in the table. In other words, assume that x==EXPR will filter +** out at least 3 out of 4 rows. If EXPR is -1 or 0 or 1, then maybe the +** "x" column is boolean or else -1 or 0 or 1 is a common default value +** on the "x" column and so in that case only cap the output row estimate +** at 1/2 instead of 1/4. */ -static void whereLoopOutputAdjust(WhereClause *pWC, WhereLoop *pLoop){ +static void whereLoopOutputAdjust( + WhereClause *pWC, /* The WHERE clause */ + WhereLoop *pLoop, /* The loop to adjust downward */ + LogEst nRow /* Number of rows in the entire table */ +){ WhereTerm *pTerm, *pX; Bitmask notAllowed = ~(pLoop->prereq|pLoop->maskSelf); - int i, j; + int i, j, k; + LogEst iReduce = 0; /* pLoop->nOut should not exceed nRow-iReduce */ - if( !OptimizationEnabled(pWC->pWInfo->pParse->db, SQLITE_AdjustOutEst) ){ - return; - } + assert( (pLoop->wsFlags & WHERE_AUTO_INDEX)==0 ); for(i=pWC->nTerm, pTerm=pWC->a; i>0; i--, pTerm++){ if( (pTerm->wtFlags & TERM_VIRTUAL)!=0 ) break; if( (pTerm->prereqAll & pLoop->maskSelf)==0 ) continue; @@ -113275,14 +119270,49 @@ if( pX==pTerm ) break; if( pX->iParent>=0 && (&pWC->a[pX->iParent])==pTerm ) break; } - if( j<0 ) pLoop->nOut += pTerm->truthProb; + if( j<0 ){ + if( pTerm->truthProb<=0 ){ + /* If a truth probability is specified using the likelihood() hints, + ** then use the probability provided by the application. */ + pLoop->nOut += pTerm->truthProb; + }else{ + /* In the absence of explicit truth probabilities, use heuristics to + ** guess a reasonable truth probability. */ + pLoop->nOut--; + if( pTerm->eOperator&WO_EQ ){ + Expr *pRight = pTerm->pExpr->pRight; + if( sqlite3ExprIsInteger(pRight, &k) && k>=(-1) && k<=1 ){ + k = 10; + }else{ + k = 20; + } + if( iReducenOut > nRow-iReduce ) pLoop->nOut = nRow - iReduce; } /* -** We have so far matched pBuilder->pNew->u.btree.nEq terms of the index pIndex. -** Try to match one more. +** Adjust the cost C by the costMult facter T. This only occurs if +** compiled with -DSQLITE_ENABLE_COSTMULT +*/ +#ifdef SQLITE_ENABLE_COSTMULT +# define ApplyCostMultiplier(C,T) C += T +#else +# define ApplyCostMultiplier(C,T) +#endif + +/* +** We have so far matched pBuilder->pNew->u.btree.nEq terms of the +** index pIndex. Try to match one more. ** +** When this function is called, pBuilder->pNew->nOut contains the +** number of rows expected to be visited by filtering using the nEq +** terms only. If it is modified, this value is restored before this +** function returns. +** ** If pProbe->tnum==0, that means pIndex is a fake index used for the ** INTEGER PRIMARY KEY. */ @@ -113302,12 +119332,12 @@ Bitmask saved_prereq; /* Original value of pNew->prereq */ u16 saved_nLTerm; /* Original value of pNew->nLTerm */ u16 saved_nEq; /* Original value of pNew->u.btree.nEq */ - u16 saved_nSkip; /* Original value of pNew->u.btree.nSkip */ + u16 saved_nSkip; /* Original value of pNew->nSkip */ u32 saved_wsFlags; /* Original value of pNew->wsFlags */ LogEst saved_nOut; /* Original value of pNew->nOut */ int iCol; /* Index of the column in the table */ int rc = SQLITE_OK; /* Return code */ - LogEst nRowEst; /* Estimated index selectivity */ + LogEst rSize; /* Number of rows in the table */ LogEst rLogSize; /* Logarithm of table size */ WhereTerm *pTop = 0, *pBtm = 0; /* Top and bottom range constraints */ @@ -113325,71 +119355,49 @@ } if( pProbe->bUnordered ) opMask &= ~(WO_GT|WO_GE|WO_LT|WO_LE); - assert( pNew->u.btree.nEq<=pProbe->nKeyCol ); - if( pNew->u.btree.nEq < pProbe->nKeyCol ){ - iCol = pProbe->aiColumn[pNew->u.btree.nEq]; - nRowEst = sqlite3LogEst(pProbe->aiRowEst[pNew->u.btree.nEq+1]); - if( nRowEst==0 && pProbe->onError==OE_None ) nRowEst = 1; - }else{ - iCol = -1; - nRowEst = 0; - } + assert( pNew->u.btree.nEqnColumn ); + iCol = pProbe->aiColumn[pNew->u.btree.nEq]; + pTerm = whereScanInit(&scan, pBuilder->pWC, pSrc->iCursor, iCol, opMask, pProbe); saved_nEq = pNew->u.btree.nEq; - saved_nSkip = pNew->u.btree.nSkip; + saved_nSkip = pNew->nSkip; saved_nLTerm = pNew->nLTerm; saved_wsFlags = pNew->wsFlags; saved_prereq = pNew->prereq; saved_nOut = pNew->nOut; pNew->rSetup = 0; - rLogSize = estLog(sqlite3LogEst(pProbe->aiRowEst[0])); - - /* Consider using a skip-scan if there are no WHERE clause constraints - ** available for the left-most terms of the index, and if the average - ** number of repeats in the left-most terms is at least 18. The magic - ** number 18 was found by experimentation to be the payoff point where - ** skip-scan become faster than a full-scan. - */ - if( pTerm==0 - && saved_nEq==saved_nSkip - && saved_nEq+1nKeyCol - && pProbe->aiRowEst[saved_nEq+1]>=18 /* TUNING: Minimum for skip-scan */ - && (rc = whereLoopResize(db, pNew, pNew->nLTerm+1))==SQLITE_OK - ){ - LogEst nIter; - pNew->u.btree.nEq++; - pNew->u.btree.nSkip++; - pNew->aLTerm[pNew->nLTerm++] = 0; - pNew->wsFlags |= WHERE_SKIPSCAN; - nIter = sqlite3LogEst(pProbe->aiRowEst[0]/pProbe->aiRowEst[saved_nEq+1]); - pNew->rRun = rLogSize + nIter; - pNew->nOut += nIter; - whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nIter); - pNew->nOut = saved_nOut; - } + rSize = pProbe->aiRowLogEst[0]; + rLogSize = estLog(rSize); for(; rc==SQLITE_OK && pTerm!=0; pTerm = whereScanNext(&scan)){ + u16 eOp = pTerm->eOperator; /* Shorthand for pTerm->eOperator */ + LogEst rCostIdx; + LogEst nOutUnadjusted; /* nOut before IN() and WHERE adjustments */ int nIn = 0; #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 int nRecValid = pBuilder->nRecValid; #endif - if( (pTerm->eOperator==WO_ISNULL || (pTerm->wtFlags&TERM_VNULL)!=0) + if( (eOp==WO_ISNULL || (pTerm->wtFlags&TERM_VNULL)!=0) && (iCol<0 || pSrc->pTab->aCol[iCol].notNull) ){ continue; /* ignore IS [NOT] NULL constraints on NOT NULL columns */ } if( pTerm->prereqRight & pNew->maskSelf ) continue; - assert( pNew->nOut==saved_nOut ); - pNew->wsFlags = saved_wsFlags; pNew->u.btree.nEq = saved_nEq; pNew->nLTerm = saved_nLTerm; if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */ pNew->aLTerm[pNew->nLTerm++] = pTerm; pNew->prereq = (saved_prereq | pTerm->prereqRight) & ~pNew->maskSelf; - pNew->rRun = rLogSize; /* Baseline cost is log2(N). Adjustments below */ - if( pTerm->eOperator & WO_IN ){ + + assert( nInMul==0 + || (pNew->wsFlags & WHERE_COLUMN_NULL)!=0 + || (pNew->wsFlags & WHERE_COLUMN_IN)!=0 + || (pNew->wsFlags & WHERE_SKIPSCAN)!=0 + ); + + if( eOp & WO_IN ){ Expr *pExpr = pTerm->pExpr; pNew->wsFlags |= WHERE_COLUMN_IN; if( ExprHasProperty(pExpr, EP_xIsSelect) ){ @@ -113399,85 +119407,119 @@ /* "x IN (value, value, ...)" */ nIn = sqlite3LogEst(pExpr->x.pList->nExpr); } - pNew->rRun += nIn; - pNew->u.btree.nEq++; - pNew->nOut = nRowEst + nInMul + nIn; - }else if( pTerm->eOperator & (WO_EQ) ){ - assert( - (pNew->wsFlags & (WHERE_COLUMN_NULL|WHERE_COLUMN_IN|WHERE_SKIPSCAN))!=0 - || nInMul==0 - ); + assert( nIn>0 ); /* RHS always has 2 or more terms... The parser + ** changes "x IN (?)" into "x=?". */ + + }else if( eOp & (WO_EQ) ){ pNew->wsFlags |= WHERE_COLUMN_EQ; - if( iCol<0 || (nInMul==0 && pNew->u.btree.nEq==pProbe->nKeyCol-1)){ - assert( (pNew->wsFlags & WHERE_COLUMN_IN)==0 || iCol<0 ); - if( iCol>=0 && pProbe->onError==OE_None ){ + if( iCol<0 || (nInMul==0 && pNew->u.btree.nEq==pProbe->nKeyCol-1) ){ + if( iCol>=0 && !IsUniqueIndex(pProbe) ){ pNew->wsFlags |= WHERE_UNQ_WANTED; }else{ pNew->wsFlags |= WHERE_ONEROW; } } - pNew->u.btree.nEq++; - pNew->nOut = nRowEst + nInMul; - }else if( pTerm->eOperator & (WO_ISNULL) ){ + }else if( eOp & WO_ISNULL ){ pNew->wsFlags |= WHERE_COLUMN_NULL; - pNew->u.btree.nEq++; - /* TUNING: IS NULL selects 2 rows */ - nIn = 10; assert( 10==sqlite3LogEst(2) ); - pNew->nOut = nRowEst + nInMul + nIn; - }else if( pTerm->eOperator & (WO_GT|WO_GE) ){ - testcase( pTerm->eOperator & WO_GT ); - testcase( pTerm->eOperator & WO_GE ); + }else if( eOp & (WO_GT|WO_GE) ){ + testcase( eOp & WO_GT ); + testcase( eOp & WO_GE ); pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_BTM_LIMIT; pBtm = pTerm; pTop = 0; }else{ - assert( pTerm->eOperator & (WO_LT|WO_LE) ); - testcase( pTerm->eOperator & WO_LT ); - testcase( pTerm->eOperator & WO_LE ); + assert( eOp & (WO_LT|WO_LE) ); + testcase( eOp & WO_LT ); + testcase( eOp & WO_LE ); pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_TOP_LIMIT; pTop = pTerm; pBtm = (pNew->wsFlags & WHERE_BTM_LIMIT)!=0 ? pNew->aLTerm[pNew->nLTerm-2] : 0; } + + /* At this point pNew->nOut is set to the number of rows expected to + ** be visited by the index scan before considering term pTerm, or the + ** values of nIn and nInMul. In other words, assuming that all + ** "x IN(...)" terms are replaced with "x = ?". This block updates + ** the value of pNew->nOut to account for pTerm (but not nIn/nInMul). */ + assert( pNew->nOut==saved_nOut ); if( pNew->wsFlags & WHERE_COLUMN_RANGE ){ - /* Adjust nOut and rRun for STAT3 range values */ - assert( pNew->nOut==saved_nOut ); + /* Adjust nOut using stat3/stat4 data. Or, if there is no stat3/stat4 + ** data, using some other estimate. */ whereRangeScanEst(pParse, pBuilder, pBtm, pTop, pNew); - } + }else{ + int nEq = ++pNew->u.btree.nEq; + assert( eOp & (WO_ISNULL|WO_EQ|WO_IN) ); + + assert( pNew->nOut==saved_nOut ); + if( pTerm->truthProb<=0 && iCol>=0 ){ + assert( (eOp & WO_IN) || nIn==0 ); + testcase( eOp & WO_IN ); + pNew->nOut += pTerm->truthProb; + pNew->nOut -= nIn; + }else{ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 - if( nInMul==0 - && pProbe->nSample - && pNew->u.btree.nEq<=pProbe->nSampleCol - && OptimizationEnabled(db, SQLITE_Stat3) - ){ - Expr *pExpr = pTerm->pExpr; - tRowcnt nOut = 0; - if( (pTerm->eOperator & (WO_EQ|WO_ISNULL))!=0 ){ - testcase( pTerm->eOperator & WO_EQ ); - testcase( pTerm->eOperator & WO_ISNULL ); - rc = whereEqualScanEst(pParse, pBuilder, pExpr->pRight, &nOut); - }else if( (pTerm->eOperator & WO_IN) - && !ExprHasProperty(pExpr, EP_xIsSelect) ){ - rc = whereInScanEst(pParse, pBuilder, pExpr->x.pList, &nOut); + tRowcnt nOut = 0; + if( nInMul==0 + && pProbe->nSample + && pNew->u.btree.nEq<=pProbe->nSampleCol + && ((eOp & WO_IN)==0 || !ExprHasProperty(pTerm->pExpr, EP_xIsSelect)) + ){ + Expr *pExpr = pTerm->pExpr; + if( (eOp & (WO_EQ|WO_ISNULL))!=0 ){ + testcase( eOp & WO_EQ ); + testcase( eOp & WO_ISNULL ); + rc = whereEqualScanEst(pParse, pBuilder, pExpr->pRight, &nOut); + }else{ + rc = whereInScanEst(pParse, pBuilder, pExpr->x.pList, &nOut); + } + if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; + if( rc!=SQLITE_OK ) break; /* Jump out of the pTerm loop */ + if( nOut ){ + pNew->nOut = sqlite3LogEst(nOut); + if( pNew->nOut>saved_nOut ) pNew->nOut = saved_nOut; + pNew->nOut -= nIn; + } + } + if( nOut==0 ) +#endif + { + pNew->nOut += (pProbe->aiRowLogEst[nEq] - pProbe->aiRowLogEst[nEq-1]); + if( eOp & WO_ISNULL ){ + /* TUNING: If there is no likelihood() value, assume that a + ** "col IS NULL" expression matches twice as many rows + ** as (col=?). */ + pNew->nOut += 10; + } + } } - assert( nOut==0 || rc==SQLITE_OK ); - if( nOut ){ - pNew->nOut = sqlite3LogEst(nOut); - if( pNew->nOut>saved_nOut ) pNew->nOut = saved_nOut; - } } -#endif + + /* Set rCostIdx to the cost of visiting selected rows in index. Add + ** it to pNew->rRun, which is currently set to the cost of the index + ** seek only. Then, if this is a non-covering index, add the cost of + ** visiting the rows in the main table. */ + rCostIdx = pNew->nOut + 1 + (15*pProbe->szIdxRow)/pSrc->pTab->szTabRow; + pNew->rRun = sqlite3LogEstAdd(rLogSize, rCostIdx); if( (pNew->wsFlags & (WHERE_IDX_ONLY|WHERE_IPK))==0 ){ - /* Each row involves a step of the index, then a binary search of - ** the main table */ - pNew->rRun = sqlite3LogEstAdd(pNew->rRun,rLogSize>27 ? rLogSize-17 : 10); + pNew->rRun = sqlite3LogEstAdd(pNew->rRun, pNew->nOut + 16); } - /* Step cost for each output row */ - pNew->rRun = sqlite3LogEstAdd(pNew->rRun, pNew->nOut); - whereLoopOutputAdjust(pBuilder->pWC, pNew); + ApplyCostMultiplier(pNew->rRun, pProbe->pTable->costMult); + + nOutUnadjusted = pNew->nOut; + pNew->rRun += nInMul + nIn; + pNew->nOut += nInMul + nIn; + whereLoopOutputAdjust(pBuilder->pWC, pNew, rSize); rc = whereLoopInsert(pBuilder, pNew); + + if( pNew->wsFlags & WHERE_COLUMN_RANGE ){ + pNew->nOut = saved_nOut; + }else{ + pNew->nOut = nOutUnadjusted; + } + if( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 - && pNew->u.btree.nEq<(pProbe->nKeyCol + (pProbe->zName!=0)) + && pNew->u.btree.nEqnColumn ){ whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nInMul+nIn); } @@ -113488,10 +119530,45 @@ } pNew->prereq = saved_prereq; pNew->u.btree.nEq = saved_nEq; - pNew->u.btree.nSkip = saved_nSkip; + pNew->nSkip = saved_nSkip; pNew->wsFlags = saved_wsFlags; pNew->nOut = saved_nOut; pNew->nLTerm = saved_nLTerm; + + /* Consider using a skip-scan if there are no WHERE clause constraints + ** available for the left-most terms of the index, and if the average + ** number of repeats in the left-most terms is at least 18. + ** + ** The magic number 18 is selected on the basis that scanning 17 rows + ** is almost always quicker than an index seek (even though if the index + ** contains fewer than 2^17 rows we assume otherwise in other parts of + ** the code). And, even if it is not, it should not be too much slower. + ** On the other hand, the extra seeks could end up being significantly + ** more expensive. */ + assert( 42==sqlite3LogEst(18) ); + if( saved_nEq==saved_nSkip + && saved_nEq+1nKeyCol + && pProbe->noSkipScan==0 + && pProbe->aiRowLogEst[saved_nEq+1]>=42 /* TUNING: Minimum for skip-scan */ + && (rc = whereLoopResize(db, pNew, pNew->nLTerm+1))==SQLITE_OK + ){ + LogEst nIter; + pNew->u.btree.nEq++; + pNew->nSkip++; + pNew->aLTerm[pNew->nLTerm++] = 0; + pNew->wsFlags |= WHERE_SKIPSCAN; + nIter = pProbe->aiRowLogEst[saved_nEq] - pProbe->aiRowLogEst[saved_nEq+1]; + pNew->nOut -= nIter; + /* TUNING: Because uncertainties in the estimates for skip-scan queries, + ** add a 1.375 fudge factor to make skip-scan slightly less likely. */ + nIter += 5; + whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, nIter + nInMul); + pNew->nOut = saved_nOut; + pNew->u.btree.nEq = saved_nEq; + pNew->nSkip = saved_nSkip; + pNew->wsFlags = saved_wsFlags; + } + return rc; } @@ -113517,6 +119594,7 @@ Expr *pExpr = sqlite3ExprSkipCollate(pOB->a[ii].pExpr); if( pExpr->op!=TK_COLUMN ) return 0; if( pExpr->iTable==iCursor ){ + if( pExpr->iColumn<0 ) return 1; for(jj=0; jjnKeyCol; jj++){ if( pExpr->iColumn==pIndex->aiColumn[jj] ) return 1; } @@ -113559,6 +119637,37 @@ ** Add all WhereLoop objects for a single table of the join where the table ** is idenfied by pBuilder->pNew->iTab. That table is guaranteed to be ** a b-tree table, not a virtual table. +** +** The costs (WhereLoop.rRun) of the b-tree loops added by this function +** are calculated as follows: +** +** For a full scan, assuming the table (or index) contains nRow rows: +** +** cost = nRow * 3.0 // full-table scan +** cost = nRow * K // scan of covering index +** cost = nRow * (K+3.0) // scan of non-covering index +** +** where K is a value between 1.1 and 3.0 set based on the relative +** estimated average size of the index and table records. +** +** For an index scan, where nVisit is the number of index rows visited +** by the scan, and nSeek is the number of seek operations required on +** the index b-tree: +** +** cost = nSeek * (log(nRow) + K * nVisit) // covering index +** cost = nSeek * (log(nRow) + (K+3.0) * nVisit) // non-covering index +** +** Normally, nSeek is 1. nSeek values greater than 1 come about if the +** WHERE clause includes "x IN (....)" terms used in place of "x=?". Or when +** implicit "x IN (SELECT x FROM tbl)" terms are added for skip-scans. +** +** The estimated values (nRow, nVisit, nSeek) often contain a large amount +** of uncertainty. For this reason, scoring is designed to pick plans that +** "do the least harm" if the estimates are inaccurate. For example, a +** log(nRow) factor is omitted from a non-covering index scan in order to +** bias the scoring in favor of using an index, since the worst-case +** performance of using an index is far better than the worst-case performance +** of a full table scan. */ static int whereLoopAddBtree( WhereLoopBuilder *pBuilder, /* WHERE clause information */ @@ -113567,7 +119676,7 @@ WhereInfo *pWInfo; /* WHERE analysis context */ Index *pProbe; /* An index we are evaluating */ Index sPk; /* A fake index object for the primary key */ - tRowcnt aiRowEstPk[2]; /* The aiRowEst[] value for the sPk index */ + LogEst aiRowEstPk[2]; /* The aiRowLogEst[] value for the sPk index */ i16 aiColumnPk = -1; /* The aColumn[] value for the sPk index */ SrcList *pTabList; /* The FROM clause */ struct SrcList_item *pSrc; /* The FROM clause btree term to add */ @@ -113601,12 +119710,14 @@ Index *pFirst; /* First of real indices on the table */ memset(&sPk, 0, sizeof(Index)); sPk.nKeyCol = 1; + sPk.nColumn = 1; sPk.aiColumn = &aiColumnPk; - sPk.aiRowEst = aiRowEstPk; + sPk.aiRowLogEst = aiRowEstPk; sPk.onError = OE_Replace; sPk.pTable = pTab; - aiRowEstPk[0] = pTab->nRowEst; - aiRowEstPk[1] = 1; + sPk.szIdxRow = pTab->szTabRow; + aiRowEstPk[0] = pTab->nRowLogEst; + aiRowEstPk[1] = 0; pFirst = pSrc->pTab->pIndex; if( pSrc->notIndexed==0 ){ /* The real indices of the table are only considered if the @@ -113615,7 +119726,7 @@ } pProbe = &sPk; } - rSize = sqlite3LogEst(pTab->nRowEst); + rSize = pTab->nRowLogEst; rLogSize = estLog(rSize); #ifndef SQLITE_OMIT_AUTOMATIC_INDEX @@ -113636,17 +119747,26 @@ if( pTerm->prereqRight & pNew->maskSelf ) continue; if( termCanDriveIndex(pTerm, pSrc, 0) ){ pNew->u.btree.nEq = 1; - pNew->u.btree.nSkip = 0; + pNew->nSkip = 0; pNew->u.btree.pIndex = 0; pNew->nLTerm = 1; pNew->aLTerm[0] = pTerm; /* TUNING: One-time cost for computing the automatic index is - ** approximately 7*N*log2(N) where N is the number of rows in - ** the table being indexed. */ - pNew->rSetup = rLogSize + rSize + 28; assert( 28==sqlite3LogEst(7) ); + ** estimated to be X*N*log2(N) where N is the number of rows in + ** the table being indexed and where X is 7 (LogEst=28) for normal + ** tables or 1.375 (LogEst=4) for views and subqueries. The value + ** of X is smaller for views and subqueries so that the query planner + ** will be more aggressive about generating automatic indexes for + ** those objects, since there is no opportunity to add schema + ** indexes on subqueries and views. */ + pNew->rSetup = rLogSize + rSize + 4; + if( pTab->pSelect==0 && (pTab->tabFlags & TF_Ephemeral)==0 ){ + pNew->rSetup += 24; + } + ApplyCostMultiplier(pNew->rSetup, pTab->costMult); /* TUNING: Each index lookup yields 20 rows in the table. This ** is more than the usual guess of 10 rows, since we have no way - ** of knowning how selective the index will ultimately be. It would + ** of knowing how selective the index will ultimately be. It would ** not be unreasonable to make this value much larger. */ pNew->nOut = 43; assert( 43==sqlite3LogEst(20) ); pNew->rRun = sqlite3LogEstAdd(rLogSize,pNew->nOut); @@ -113662,11 +119782,13 @@ */ for(; rc==SQLITE_OK && pProbe; pProbe=pProbe->pNext, iSortIdx++){ if( pProbe->pPartIdxWhere!=0 - && !whereUsablePartialIndex(pNew->iTab, pWC, pProbe->pPartIdxWhere) ){ + && !whereUsablePartialIndex(pSrc->iCursor, pWC, pProbe->pPartIdxWhere) ){ + testcase( pNew->iTab!=pSrc->iCursor ); /* See ticket [98d973b8f5] */ continue; /* Partial index inappropriate for this query */ } + rSize = pProbe->aiRowLogEst[0]; pNew->u.btree.nEq = 0; - pNew->u.btree.nSkip = 0; + pNew->nSkip = 0; pNew->nLTerm = 0; pNew->iSortIdx = 0; pNew->rSetup = 0; @@ -113682,11 +119804,10 @@ /* Full table scan */ pNew->iSortIdx = b ? iSortIdx : 0; - /* TUNING: Cost of full table scan is 3*(N + log2(N)). - ** + The extra 3 factor is to encourage the use of indexed lookups - ** over full scans. FIXME */ - pNew->rRun = sqlite3LogEstAdd(rSize,rLogSize) + 16; - whereLoopOutputAdjust(pWC, pNew); + /* TUNING: Cost of full table scan is (N*3.0). */ + pNew->rRun = rSize + 16; + ApplyCostMultiplier(pNew->rRun, pTab->costMult); + whereLoopOutputAdjust(pWC, pNew, rSize); rc = whereLoopInsert(pBuilder, pNew); pNew->nOut = rSize; if( rc ) break; @@ -113712,20 +119833,17 @@ ) ){ pNew->iSortIdx = b ? iSortIdx : 0; - if( m==0 ){ - /* TUNING: Cost of a covering index scan is K*(N + log2(N)). - ** + The extra factor K of between 1.1 and 3.0 that depends - ** on the relative sizes of the table and the index. K - ** is smaller for smaller indices, thus favoring them. - */ - pNew->rRun = sqlite3LogEstAdd(rSize,rLogSize) + 1 + - (15*pProbe->szIdxRow)/pTab->szTabRow; - }else{ - /* TUNING: Cost of scanning a non-covering index is (N+1)*log2(N) - ** which we will simplify to just N*log2(N) */ - pNew->rRun = rSize + rLogSize; + + /* The cost of visiting the index rows is N*K, where K is + ** between 1.1 and 3.0, depending on the relative sizes of the + ** index and table rows. If this is a non-covering index scan, + ** also add the cost of visiting table rows (N*3.0). */ + pNew->rRun = rSize + 1 + (15*pProbe->szIdxRow)/pTab->szTabRow; + if( m!=0 ){ + pNew->rRun = sqlite3LogEstAdd(pNew->rRun, rSize+16); } - whereLoopOutputAdjust(pWC, pNew); + ApplyCostMultiplier(pNew->rRun, pTab->costMult); + whereLoopOutputAdjust(pWC, pNew, rSize); rc = whereLoopInsert(pBuilder, pNew); pNew->nOut = rSize; if( rc ) break; @@ -113895,8 +120013,8 @@ pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr; pIdxInfo->needToFreeIdxStr = 0; pNew->u.vtab.idxStr = pIdxInfo->idxStr; - pNew->u.vtab.isOrdered = (u8)((pIdxInfo->nOrderBy!=0) - && pIdxInfo->orderByConsumed); + pNew->u.vtab.isOrdered = (i8)(pIdxInfo->orderByConsumed ? + pIdxInfo->nOrderBy : 0); pNew->rSetup = 0; pNew->rRun = sqlite3LogEstFromDouble(pIdxInfo->estimatedCost); pNew->nOut = sqlite3LogEst(pIdxInfo->estimatedRows); @@ -113928,16 +120046,14 @@ int iCur; WhereClause tempWC; WhereLoopBuilder sSubBuild; - WhereOrSet sSum, sCur, sPrev; + WhereOrSet sSum, sCur; struct SrcList_item *pItem; pWC = pBuilder->pWC; - if( pWInfo->wctrlFlags & WHERE_AND_ONLY ) return SQLITE_OK; pWCEnd = pWC->a + pWC->nTerm; pNew = pBuilder->pNew; memset(&sSum, 0, sizeof(sSum)); pItem = pWInfo->pTabList->a + pNew->iTab; - if( !HasRowid(pItem->pTab) ) return SQLITE_OK; iCur = pItem->iCursor; for(pTerm=pWC->a; pTerma; pOrTermeOperator & WO_AND)!=0 ){ sSubBuild.pWC = &pOrTerm->u.pAndInfo->wc; @@ -113968,6 +120085,15 @@ continue; } sCur.n = 0; +#ifdef WHERETRACE_ENABLED + WHERETRACE(0x200, ("OR-term %d of %p has %d subterms:\n", + (int)(pOrTerm-pOrWC->a), pTerm, sSubBuild.pWC->nTerm)); + if( sqlite3WhereTrace & 0x400 ){ + for(i=0; inTerm; i++){ + whereTermPrint(&sSubBuild.pWC->a[i], i); + } + } +#endif #ifndef SQLITE_OMIT_VIRTUALTABLE if( IsVirtual(pItem->pTab) ){ rc = whereLoopAddVirtual(&sSubBuild, mExtra); @@ -113976,6 +120102,9 @@ { rc = whereLoopAddBtree(&sSubBuild, mExtra); } + if( rc==SQLITE_OK ){ + rc = whereLoopAddOr(&sSubBuild, mExtra); + } assert( rc==SQLITE_OK || sCur.n==0 ); if( sCur.n==0 ){ sSum.n = 0; @@ -113984,6 +120113,7 @@ whereOrMove(&sSum, &sCur); once = 0; }else{ + WhereOrSet sPrev; whereOrMove(&sPrev, &sSum); sSum.n = 0; for(i=0; iiSortIdx = 0; memset(&pNew->u, 0, sizeof(pNew->u)); for(i=0; rc==SQLITE_OK && irRun = sSum.a[i].rRun + 18; + /* TUNING: Currently sSum.a[i].rRun is set to the sum of the costs + ** of all sub-scans required by the OR-scan. However, due to rounding + ** errors, it may be that the cost of the OR-scan is equal to its + ** most expensive sub-scan. Add the smallest possible penalty + ** (equivalent to multiplying the cost by 1.07) to ensure that + ** this does not happen. Otherwise, for WHERE clauses such as the + ** following where there is an index on "y": + ** + ** WHERE likelihood(x=?, 0.99) OR y=? + ** + ** the planner may elect to "OR" together a full-table scan and an + ** index lookup. And other similarly odd results. */ + pNew->rRun = sSum.a[i].rRun + 1; pNew->nOut = sSum.a[i].nOut; pNew->prereq = sSum.a[i].prereq; rc = whereLoopInsert(pBuilder, pNew); } + WHERETRACE(0x200, ("End processing OR-clause %p\n", pTerm)); } } return rc; @@ -114057,21 +120199,21 @@ /* ** Examine a WherePath (with the addition of the extra WhereLoop of the 5th ** parameters) to see if it outputs rows in the requested ORDER BY -** (or GROUP BY) without requiring a separate sort operation. Return: +** (or GROUP BY) without requiring a separate sort operation. Return N: ** -** 0: ORDER BY is not satisfied. Sorting required -** 1: ORDER BY is satisfied. Omit sorting -** -1: Unknown at this time +** N>0: N terms of the ORDER BY clause are satisfied +** N==0: No terms of the ORDER BY clause are satisfied +** N<0: Unknown yet how many terms of ORDER BY might be satisfied. ** ** Note that processing for WHERE_GROUPBY and WHERE_DISTINCTBY is not as ** strict. With GROUP BY and DISTINCT the only requirement is that ** equivalent rows appear immediately adjacent to one another. GROUP BY -** and DISTINT do not require rows to appear in any particular order as long -** as equivelent rows are grouped together. Thus for GROUP BY and DISTINCT +** and DISTINCT do not require rows to appear in any particular order as long +** as equivalent rows are grouped together. Thus for GROUP BY and DISTINCT ** the pOrderBy terms can be matched in any order. With ORDER BY, the ** pOrderBy terms must be matched in strict left-to-right order. */ -static int wherePathSatisfiesOrderBy( +static i8 wherePathSatisfiesOrderBy( WhereInfo *pWInfo, /* The WHERE clause */ ExprList *pOrderBy, /* ORDER BY or GROUP BY or DISTINCT clause to check */ WherePath *pPath, /* The WherePath to check */ @@ -114127,14 +120269,6 @@ */ assert( pOrderBy!=0 ); - - /* Sortability of virtual tables is determined by the xBestIndex method - ** of the virtual table itself */ - if( pLast->wsFlags & WHERE_VIRTUALTABLE ){ - testcase( nLoop>0 ); /* True when outer loops are one-row and match - ** no ORDER BY terms */ - return pLast->u.vtab.isOrdered; - } if( nLoop && OptimizationDisabled(db, SQLITE_OrderByIdxJoin) ) return 0; nOrderBy = pOrderBy->nExpr; @@ -114147,7 +120281,10 @@ for(iLoop=0; isOrderDistinct && obSat0 ) ready |= pLoop->maskSelf; pLoop = iLoopaLoop[iLoop] : pLast; - assert( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 ); + if( pLoop->wsFlags & WHERE_VIRTUALTABLE ){ + if( pLoop->u.vtab.isOrdered ) obSat = obDone; + break; + } iCur = pWInfo->pTabList->a[pLoop->iTab].iCursor; /* Mark off any ORDER BY term X that is a column in the table of @@ -114188,7 +120325,7 @@ nColumn = pIndex->nColumn; assert( nColumn==nKeyCol+1 || !HasRowid(pIndex->pTable) ); assert( pIndex->aiColumn[nColumn-1]==(-1) || !HasRowid(pIndex->pTable)); - isOrderDistinct = pIndex->onError!=OE_None; + isOrderDistinct = IsUniqueIndex(pIndex); } /* Loop through all columns of the index and deal with the ones @@ -114201,7 +120338,7 @@ /* Skip over == and IS NULL terms */ if( ju.btree.nEq - && pLoop->u.btree.nSkip==0 + && pLoop->nSkip==0 && ((i = pLoop->aLTerm[j]->eOperator) & (WO_EQ|WO_ISNULL))!=0 ){ if( i & WO_ISNULL ){ @@ -114235,7 +120372,7 @@ } /* Find the ORDER BY term that corresponds to the j-th column - ** of the index and and mark that ORDER BY term off + ** of the index and mark that ORDER BY term off */ bOnce = 1; isMatch = 0; @@ -114256,23 +120393,23 @@ isMatch = 1; break; } + if( isMatch && (wctrlFlags & WHERE_GROUPBY)==0 ){ + /* Make sure the sort order is compatible in an ORDER BY clause. + ** Sort order is irrelevant for a GROUP BY clause. */ + if( revSet ){ + if( (rev ^ revIdx)!=pOrderBy->a[i].sortOrder ) isMatch = 0; + }else{ + rev = revIdx ^ pOrderBy->a[i].sortOrder; + if( rev ) *pRevMask |= MASKBIT(iLoop); + revSet = 1; + } + } if( isMatch ){ if( iColumn<0 ){ testcase( distinctColumns==0 ); distinctColumns = 1; } obSat |= MASKBIT(i); - if( (pWInfo->wctrlFlags & WHERE_GROUPBY)==0 ){ - /* Make sure the sort order is compatible in an ORDER BY clause. - ** Sort order is irrelevant for a GROUP BY clause. */ - if( revSet ){ - if( (rev ^ revIdx)!=pOrderBy->a[i].sortOrder ) return 0; - }else{ - rev = revIdx ^ pOrderBy->a[i].sortOrder; - if( rev ) *pRevMask |= MASKBIT(iLoop); - revSet = 1; - } - } }else{ /* No match found */ if( j==0 || j0; i--){ + Bitmask m = MASKBIT(i) - 1; + if( (obSat&m)==m ) return i; + } + return 0; + } return -1; } + +/* +** If the WHERE_GROUPBY flag is set in the mask passed to sqlite3WhereBegin(), +** the planner assumes that the specified pOrderBy list is actually a GROUP +** BY clause - and so any order that groups rows as required satisfies the +** request. +** +** Normally, in this case it is not possible for the caller to determine +** whether or not the rows are really being delivered in sorted order, or +** just in some other order that provides the required grouping. However, +** if the WHERE_SORTBYGROUP flag is also passed to sqlite3WhereBegin(), then +** this function may be called on the returned WhereInfo object. It returns +** true if the rows really will be sorted in the specified order, or false +** otherwise. +** +** For example, assuming: +** +** CREATE INDEX i1 ON t1(x, Y); +** +** then +** +** SELECT * FROM t1 GROUP BY x,y ORDER BY x,y; -- IsSorted()==1 +** SELECT * FROM t1 GROUP BY y,x ORDER BY y,x; -- IsSorted()==0 +*/ +SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo *pWInfo){ + assert( pWInfo->wctrlFlags & WHERE_GROUPBY ); + assert( pWInfo->wctrlFlags & WHERE_SORTBYGROUP ); + return pWInfo->sorted; +} + #ifdef WHERETRACE_ENABLED /* For debugging use only: */ static const char *wherePathName(WherePath *pPath, int nLoop, WhereLoop *pLast){ @@ -114321,7 +120494,45 @@ } #endif +/* +** Return the cost of sorting nRow rows, assuming that the keys have +** nOrderby columns and that the first nSorted columns are already in +** order. +*/ +static LogEst whereSortingCost( + WhereInfo *pWInfo, + LogEst nRow, + int nOrderBy, + int nSorted +){ + /* TUNING: Estimated cost of a full external sort, where N is + ** the number of rows to sort is: + ** + ** cost = (3.0 * N * log(N)). + ** + ** Or, if the order-by clause has X terms but only the last Y + ** terms are out of order, then block-sorting will reduce the + ** sorting cost to: + ** + ** cost = (3.0 * N * log(N)) * (Y/X) + ** + ** The (Y/X) term is implemented using stack variable rScale + ** below. */ + LogEst rScale, rSortCost; + assert( nOrderBy>0 && 66==sqlite3LogEst(100) ); + rScale = sqlite3LogEst((nOrderBy-nSorted)*100/nOrderBy) - 66; + rSortCost = nRow + estLog(nRow) + rScale + 16; + /* TUNING: The cost of implementing DISTINCT using a B-TREE is + ** similar but with a larger constant of proportionality. + ** Multiply by an additional factor of 3.0. */ + if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){ + rSortCost += 16; + } + + return rSortCost; +} + /* ** Given the list of WhereLoop objects at pWInfo->pLoops, this routine ** attempts to find the lowest cost path that visits each WhereLoop @@ -114342,33 +120553,45 @@ int iLoop; /* Loop counter over the terms of the join */ int ii, jj; /* Loop counters */ int mxI = 0; /* Index of next entry to replace */ - LogEst rCost; /* Cost of a path */ - LogEst nOut; /* Number of outputs */ + int nOrderBy; /* Number of ORDER BY clause terms */ LogEst mxCost = 0; /* Maximum cost of a set of paths */ - LogEst mxOut = 0; /* Maximum nOut value on the set of paths */ - LogEst rSortCost; /* Cost to do a sort */ + LogEst mxUnsorted = 0; /* Maximum unsorted cost of a set of path */ int nTo, nFrom; /* Number of valid entries in aTo[] and aFrom[] */ WherePath *aFrom; /* All nFrom paths at the previous level */ WherePath *aTo; /* The nTo best paths at the current level */ WherePath *pFrom; /* An element of aFrom[] that we are working on */ WherePath *pTo; /* An element of aTo[] that we are working on */ WhereLoop *pWLoop; /* One of the WhereLoop objects */ WhereLoop **pX; /* Used to divy up the pSpace memory */ + LogEst *aSortCost = 0; /* Sorting and partial sorting costs */ char *pSpace; /* Temporary memory used by this routine */ + int nSpace; /* Bytes of space allocated at pSpace */ pParse = pWInfo->pParse; db = pParse->db; nLoop = pWInfo->nLevel; /* TUNING: For simple queries, only the best path is tracked. ** For 2-way joins, the 5 best paths are followed. ** For joins of 3 or more tables, track the 10 best paths */ - mxChoice = (nLoop==1) ? 1 : (nLoop==2 ? 5 : 10); + mxChoice = (nLoop<=1) ? 1 : (nLoop==2 ? 5 : 10); assert( nLoop<=pWInfo->pTabList->nSrc ); - WHERETRACE(0x002, ("---- begin solver\n")); + WHERETRACE(0x002, ("---- begin solver. (nRowEst=%d)\n", nRowEst)); - /* Allocate and initialize space for aTo and aFrom */ - ii = (sizeof(WherePath)+sizeof(WhereLoop*)*nLoop)*mxChoice*2; - pSpace = sqlite3DbMallocRaw(db, ii); + /* If nRowEst is zero and there is an ORDER BY clause, ignore it. In this + ** case the purpose of this call is to estimate the number of rows returned + ** by the overall query. Once this estimate has been obtained, the caller + ** will invoke this function a second time, passing the estimate as the + ** nRowEst parameter. */ + if( pWInfo->pOrderBy==0 || nRowEst==0 ){ + nOrderBy = 0; + }else{ + nOrderBy = pWInfo->pOrderBy->nExpr; + } + + /* Allocate and initialize space for aTo, aFrom and aSortCost[] */ + nSpace = (sizeof(WherePath)+sizeof(WhereLoop*)*nLoop)*mxChoice*2; + nSpace += sizeof(LogEst) * nOrderBy; + pSpace = sqlite3DbMallocRaw(db, nSpace); if( pSpace==0 ) return SQLITE_NOMEM; aTo = (WherePath*)pSpace; aFrom = aTo+mxChoice; @@ -114377,6 +120600,18 @@ for(ii=mxChoice*2, pFrom=aTo; ii>0; ii--, pFrom++, pX += nLoop){ pFrom->aLoop = pX; } + if( nOrderBy ){ + /* If there is an ORDER BY clause and it is not being ignored, set up + ** space for the aSortCost[] array. Each element of the aSortCost array + ** is either zero - meaning it has not yet been initialized - or the + ** cost of sorting nRowEst rows of data where the first X terms of + ** the ORDER BY clause are already in order, where X is the array + ** index. */ + aSortCost = (LogEst*)pX; + memset(aSortCost, 0, sizeof(LogEst) * nOrderBy); + } + assert( aSortCost==0 || &pSpace[nSpace]==(char*)&aSortCost[nOrderBy] ); + assert( aSortCost!=0 || &pSpace[nSpace]==(char*)pX ); /* Seed the search with a single WherePath containing zero WhereLoops. ** @@ -114385,19 +120620,15 @@ ** rows, then do not use the automatic index. */ aFrom[0].nRow = MIN(pParse->nQueryLoop, 46); assert( 46==sqlite3LogEst(25) ); nFrom = 1; - - /* Precompute the cost of sorting the final result set, if the caller - ** to sqlite3WhereBegin() was concerned about sorting */ - rSortCost = 0; - if( pWInfo->pOrderBy==0 || nRowEst==0 ){ - aFrom[0].isOrderedValid = 1; - }else{ - /* TUNING: Estimated cost of sorting is 48*N*log2(N) where N is the - ** number of output rows. The 48 is the expected size of a row to sort. - ** FIXME: compute a better estimate of the 48 multiplier based on the - ** result set expressions. */ - rSortCost = nRowEst + estLog(nRowEst); - WHERETRACE(0x002,("---- sort cost=%-3d\n", rSortCost)); + assert( aFrom[0].isOrdered==0 ); + if( nOrderBy ){ + /* If nLoop is zero, then there are no FROM terms in the query. Since + ** in this case the query may return a maximum of one row, the results + ** are already in the requested order. Set isOrdered to nOrderBy to + ** indicate this. Or, if nLoop is greater than zero, set isOrdered to + ** -1, indicating that the result set may or may not be ordered, + ** depending on the loops added to the current plan. */ + aFrom[0].isOrdered = nLoop>0 ? -1 : nOrderBy; } /* Compute successively longer WherePaths using the previous generation @@ -114407,60 +120638,82 @@ nTo = 0; for(ii=0, pFrom=aFrom; iipLoops; pWLoop; pWLoop=pWLoop->pNextLoop){ - Bitmask maskNew; - Bitmask revMask = 0; - u8 isOrderedValid = pFrom->isOrderedValid; - u8 isOrdered = pFrom->isOrdered; + LogEst nOut; /* Rows visited by (pFrom+pWLoop) */ + LogEst rCost; /* Cost of path (pFrom+pWLoop) */ + LogEst rUnsorted; /* Unsorted cost of (pFrom+pWLoop) */ + i8 isOrdered = pFrom->isOrdered; /* isOrdered for (pFrom+pWLoop) */ + Bitmask maskNew; /* Mask of src visited by (..) */ + Bitmask revMask = 0; /* Mask of rev-order loops for (..) */ + if( (pWLoop->prereq & ~pFrom->maskLoop)!=0 ) continue; if( (pWLoop->maskSelf & pFrom->maskLoop)!=0 ) continue; /* At this point, pWLoop is a candidate to be the next loop. ** Compute its cost */ - rCost = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow); - rCost = sqlite3LogEstAdd(rCost, pFrom->rCost); + rUnsorted = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow); + rUnsorted = sqlite3LogEstAdd(rUnsorted, pFrom->rUnsorted); nOut = pFrom->nRow + pWLoop->nOut; maskNew = pFrom->maskLoop | pWLoop->maskSelf; - if( !isOrderedValid ){ - switch( wherePathSatisfiesOrderBy(pWInfo, + if( isOrdered<0 ){ + isOrdered = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, pFrom, pWInfo->wctrlFlags, - iLoop, pWLoop, &revMask) ){ - case 1: /* Yes. pFrom+pWLoop does satisfy the ORDER BY clause */ - isOrdered = 1; - isOrderedValid = 1; - break; - case 0: /* No. pFrom+pWLoop will require a separate sort */ - isOrdered = 0; - isOrderedValid = 1; - rCost = sqlite3LogEstAdd(rCost, rSortCost); - break; - default: /* Cannot tell yet. Try again on the next iteration */ - break; - } + iLoop, pWLoop, &revMask); }else{ revMask = pFrom->revLoop; } - /* Check to see if pWLoop should be added to the mxChoice best so far */ + if( isOrdered>=0 && isOrderedisOrdered^isOrdered)&0x80)==0" is equivalent + ** to (pTo->isOrdered==(-1))==(isOrdered==(-1))" for the range + ** of legal values for isOrdered, -1..64. + */ for(jj=0, pTo=aTo; jjmaskLoop==maskNew - && pTo->isOrderedValid==isOrderedValid - && ((pTo->rCost<=rCost && pTo->nRow<=nOut) || - (pTo->rCost>=rCost && pTo->nRow>=nOut)) + && ((pTo->isOrdered^isOrdered)&0x80)==0 ){ testcase( jj==nTo-1 ); break; } } if( jj>=nTo ){ - if( nTo>=mxChoice && rCost>=mxCost ){ + /* None of the existing best-so-far paths match the candidate. */ + if( nTo>=mxChoice + && (rCost>mxCost || (rCost==mxCost && rUnsorted>=mxUnsorted)) + ){ + /* The current candidate is no better than any of the mxChoice + ** paths currently in the best-so-far buffer. So discard + ** this candidate as not viable. */ #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ sqlite3DebugPrintf("Skip %s cost=%-3d,%3d order=%c\n", wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, - isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?'); + isOrdered>=0 ? isOrdered+'0' : '?'); } #endif continue; } - /* Add a new Path to the aTo[] set */ + /* If we reach this points it means that the new candidate path + ** needs to be added to the set of best-so-far paths. */ if( nTo=0 ? isOrdered+'0' : '?'); } #endif }else{ - if( pTo->rCost<=rCost && pTo->nRow<=nOut ){ + /* Control reaches here if best-so-far path pTo=aTo[jj] covers the + ** same set of loops and has the sam isOrdered setting as the + ** candidate path. Check to see if the candidate should replace + ** pTo or if the candidate should be skipped */ + if( pTo->rCostrCost==rCost && pTo->nRow<=nOut) ){ #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ sqlite3DebugPrintf( "Skip %s cost=%-3d,%3d order=%c", wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, - isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?'); + isOrdered>=0 ? isOrdered+'0' : '?'); sqlite3DebugPrintf(" vs %s cost=%-3d,%d order=%c\n", wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow, - pTo->isOrderedValid ? (pTo->isOrdered ? 'Y' : 'N') : '?'); + pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); } #endif + /* Discard the candidate path from further consideration */ testcase( pTo->rCost==rCost ); continue; } testcase( pTo->rCost==rCost+1 ); - /* A new and better score for a previously created equivalent path */ + /* Control reaches here if the candidate path is better than the + ** pTo path. Replace pTo with the candidate. */ #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ sqlite3DebugPrintf( "Update %s cost=%-3d,%3d order=%c", wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, - isOrderedValid ? (isOrdered ? 'Y' : 'N') : '?'); + isOrdered>=0 ? isOrdered+'0' : '?'); sqlite3DebugPrintf(" was %s cost=%-3d,%3d order=%c\n", wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow, - pTo->isOrderedValid ? (pTo->isOrdered ? 'Y' : 'N') : '?'); + pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); } #endif } @@ -114511,18 +120770,20 @@ pTo->revLoop = revMask; pTo->nRow = nOut; pTo->rCost = rCost; - pTo->isOrderedValid = isOrderedValid; + pTo->rUnsorted = rUnsorted; pTo->isOrdered = isOrdered; memcpy(pTo->aLoop, pFrom->aLoop, sizeof(WhereLoop*)*iLoop); pTo->aLoop[iLoop] = pWLoop; if( nTo>=mxChoice ){ mxI = 0; mxCost = aTo[0].rCost; - mxOut = aTo[0].nRow; + mxUnsorted = aTo[0].nRow; for(jj=1, pTo=&aTo[1]; jjrCost>mxCost || (pTo->rCost==mxCost && pTo->nRow>mxOut) ){ + if( pTo->rCost>mxCost + || (pTo->rCost==mxCost && pTo->rUnsorted>mxUnsorted) + ){ mxCost = pTo->rCost; - mxOut = pTo->nRow; + mxUnsorted = pTo->rUnsorted; mxI = jj; } } @@ -114531,13 +120792,13 @@ } #ifdef WHERETRACE_ENABLED /* >=2 */ - if( sqlite3WhereTrace>=2 ){ + if( sqlite3WhereTrace & 0x02 ){ sqlite3DebugPrintf("---- after round %d ----\n", iLoop); for(ii=0, pTo=aTo; iirCost, pTo->nRow, - pTo->isOrderedValid ? (pTo->isOrdered ? 'Y' : 'N') : '?'); - if( pTo->isOrderedValid && pTo->isOrdered ){ + pTo->isOrdered>=0 ? (pTo->isOrdered+'0') : '?'); + if( pTo->isOrdered>0 ){ sqlite3DebugPrintf(" rev=0x%llx\n", pTo->revLoop); }else{ sqlite3DebugPrintf("\n"); @@ -114580,16 +120841,36 @@ Bitmask notUsed; int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pResultSet, pFrom, WHERE_DISTINCTBY, nLoop-1, pFrom->aLoop[nLoop-1], ¬Used); - if( rc==1 ) pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; + if( rc==pWInfo->pResultSet->nExpr ){ + pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; + } } - if( pFrom->isOrdered ){ + if( pWInfo->pOrderBy ){ if( pWInfo->wctrlFlags & WHERE_DISTINCTBY ){ - pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; + if( pFrom->isOrdered==pWInfo->pOrderBy->nExpr ){ + pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; + } }else{ - pWInfo->bOBSat = 1; + pWInfo->nOBSat = pFrom->isOrdered; + if( pWInfo->nOBSat<0 ) pWInfo->nOBSat = 0; pWInfo->revMask = pFrom->revLoop; } + if( (pWInfo->wctrlFlags & WHERE_SORTBYGROUP) + && pWInfo->nOBSat==pWInfo->pOrderBy->nExpr + ){ + Bitmask revMask = 0; + int nOrder = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, + pFrom, 0, nLoop-1, pFrom->aLoop[nLoop-1], &revMask + ); + assert( pWInfo->sorted==0 ); + if( nOrder==pWInfo->pOrderBy->nExpr ){ + pWInfo->sorted = 1; + pWInfo->revMask = revMask; + } + } } + + pWInfo->nRowOut = pFrom->nRow; /* Free temporary memory and return success */ @@ -114630,7 +120911,7 @@ pWC = &pWInfo->sWC; pLoop = pBuilder->pNew; pLoop->wsFlags = 0; - pLoop->u.btree.nSkip = 0; + pLoop->nSkip = 0; pTerm = findTerm(pWC, iCur, -1, 0, WO_EQ, 0); if( pTerm ){ pLoop->wsFlags = WHERE_COLUMN_EQ|WHERE_IPK|WHERE_ONEROW; @@ -114642,8 +120923,7 @@ }else{ for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ assert( pLoop->aLTermSpace==pLoop->aLTerm ); - assert( ArraySize(pLoop->aLTermSpace)==4 ); - if( pIdx->onError==OE_None + if( !IsUniqueIndex(pIdx) || pIdx->pPartIdxWhere!=0 || pIdx->nKeyCol>ArraySize(pLoop->aLTermSpace) ) continue; @@ -114671,7 +120951,7 @@ pLoop->maskSelf = getMask(&pWInfo->sMaskSet, iCur); pWInfo->a[0].iTabCur = iCur; pWInfo->nRowOut = 1; - if( pWInfo->pOrderBy ) pWInfo->bOBSat = 1; + if( pWInfo->pOrderBy ) pWInfo->nOBSat = pWInfo->pOrderBy->nExpr; if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){ pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; } @@ -114775,7 +121055,7 @@ Parse *pParse, /* The parser context */ SrcList *pTabList, /* FROM clause: A list of all tables to be scanned */ Expr *pWhere, /* The WHERE clause */ - ExprList *pOrderBy, /* An ORDER BY clause, or NULL */ + ExprList *pOrderBy, /* An ORDER BY (or GROUP BY) clause, or NULL */ ExprList *pResultSet, /* Result set of the query */ u16 wctrlFlags, /* One of the WHERE_* flags defined in sqliteInt.h */ int iIdxCur /* If WHERE_ONETABLE_ONLY is set, index cursor number */ @@ -114797,6 +121077,10 @@ /* Variable initialization */ db = pParse->db; memset(&sWLB, 0, sizeof(sWLB)); + + /* An ORDER/GROUP BY clause of more than 63 terms cannot be optimized */ + testcase( pOrderBy && pOrderBy->nExpr==BMS-1 ); + if( pOrderBy && pOrderBy->nExpr>=BMS ) pOrderBy = 0; sWLB.pOrderBy = pOrderBy; /* Disable the DISTINCT optimization if SQLITE_DistinctOpt is set via @@ -114841,7 +121125,7 @@ pWInfo->pTabList = pTabList; pWInfo->pOrderBy = pOrderBy; pWInfo->pResultSet = pResultSet; - pWInfo->iBreak = sqlite3VdbeMakeLabel(v); + pWInfo->iBreak = pWInfo->iContinue = sqlite3VdbeMakeLabel(v); pWInfo->wctrlFlags = wctrlFlags; pWInfo->savedNQueryLoop = pParse->nQueryLoop; pMaskSet = &pWInfo->sMaskSet; @@ -114875,7 +121159,7 @@ /* Special case: No FROM clause */ if( nTabList==0 ){ - if( pOrderBy ) pWInfo->bOBSat = 1; + if( pOrderBy ) pWInfo->nOBSat = pOrderBy->nExpr; if( wctrlFlags & WHERE_WANT_DISTINCT ){ pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; } @@ -114934,23 +121218,16 @@ /* Construct the WhereLoop objects */ WHERETRACE(0xffff,("*** Optimizer Start ***\n")); +#if defined(WHERETRACE_ENABLED) /* Display all terms of the WHERE clause */ -#if defined(WHERETRACE_ENABLED) && defined(SQLITE_ENABLE_TREE_EXPLAIN) if( sqlite3WhereTrace & 0x100 ){ int i; - Vdbe *v = pParse->pVdbe; - sqlite3ExplainBegin(v); for(i=0; inTerm; i++){ - sqlite3ExplainPrintf(v, "#%-2d ", i); - sqlite3ExplainPush(v); - whereExplainTerm(v, &sWLB.pWC->a[i]); - sqlite3ExplainPop(v); - sqlite3ExplainNL(v); + whereTermPrint(&sWLB.pWC->a[i], i); } - sqlite3ExplainFinish(v); - sqlite3DebugPrintf("%s", sqlite3VdbeExplanation(v)); } #endif + if( nTabList!=1 || whereShortCut(&sWLB)==0 ){ rc = whereLoopAddAll(&sWLB); if( rc ) goto whereBeginError; @@ -114986,8 +121263,8 @@ if( sqlite3WhereTrace ){ int ii; sqlite3DebugPrintf("---- Solution nRow=%d", pWInfo->nRowOut); - if( pWInfo->bOBSat ){ - sqlite3DebugPrintf(" ORDERBY=0x%llx", pWInfo->revMask); + if( pWInfo->nOBSat>0 ){ + sqlite3DebugPrintf(" ORDERBY=%d,0x%llx", pWInfo->nOBSat, pWInfo->revMask); } switch( pWInfo->eDistinct ){ case WHERE_DISTINCT_UNIQUE: { @@ -115110,7 +121387,14 @@ int op = OP_OpenRead; /* iIdxCur is always set if to a positive value if ONEPASS is possible */ assert( iIdxCur!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 ); - if( pWInfo->okOnePass ){ + if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIx) + && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0 + ){ + /* This is one term of an OR-optimization using the PRIMARY KEY of a + ** WITHOUT ROWID table. No need for a separate index */ + iIndexCur = pLevel->iTabCur; + op = 0; + }else if( pWInfo->okOnePass ){ Index *pJ = pTabItem->pTab->pIndex; iIndexCur = iIdxCur; assert( wctrlFlags & WHERE_ONEPASS_DESIRED ); @@ -115122,15 +121406,18 @@ pWInfo->aiCurOnePass[1] = iIndexCur; }else if( iIdxCur && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0 ){ iIndexCur = iIdxCur; + if( wctrlFlags & WHERE_REOPEN_IDX ) op = OP_ReopenIdx; }else{ iIndexCur = pParse->nTab++; } pLevel->iIdxCur = iIndexCur; assert( pIx->pSchema==pTab->pSchema ); assert( iIndexCur>=0 ); - sqlite3VdbeAddOp3(v, op, iIndexCur, pIx->tnum, iDb); - sqlite3VdbeSetP4KeyInfo(pParse, pIx); - VdbeComment((v, "%s", pIx->zName)); + if( op ){ + sqlite3VdbeAddOp3(v, op, iIndexCur, pIx->tnum, iDb); + sqlite3VdbeSetP4KeyInfo(pParse, pIx); + VdbeComment((v, "%s", pIx->zName)); + } } if( iDb>=0 ) sqlite3CodeVerifySchema(pParse, iDb); notReady &= ~getMask(&pWInfo->sMaskSet, pTabItem->iCursor); @@ -115144,18 +121431,26 @@ */ notReady = ~(Bitmask)0; for(ii=0; iia[ii]; + wsFlags = pLevel->pWLoop->wsFlags; #ifndef SQLITE_OMIT_AUTOMATIC_INDEX if( (pLevel->pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 ){ constructAutomaticIndex(pParse, &pWInfo->sWC, &pTabList->a[pLevel->iFrom], notReady, pLevel); if( db->mallocFailed ) goto whereBeginError; } #endif - explainOneScan(pParse, pTabList, pLevel, ii, pLevel->iFrom, wctrlFlags); + addrExplain = explainOneScan( + pParse, pTabList, pLevel, ii, pLevel->iFrom, wctrlFlags + ); pLevel->addrBody = sqlite3VdbeCurrentAddr(v); notReady = codeOneLoopStart(pWInfo, ii, notReady); pWInfo->iContinue = pLevel->addrCont; + if( (wsFlags&WHERE_MULTI_OR)==0 && (wctrlFlags&WHERE_ONETABLE_ONLY)==0 ){ + addScanStatus(v, pTabList, pLevel, addrExplain); + } } /* Done. */ @@ -115467,7 +121762,7 @@ ** unary TK_ISNULL or TK_NOTNULL expression. */ static void binaryToUnaryIfNull(Parse *pParse, Expr *pY, Expr *pA, int op){ sqlite3 *db = pParse->db; - if( db->mallocFailed==0 && pY->op==TK_NULL ){ + if( pY && pA && pY->op==TK_NULL ){ pA->op = (u8)op; sqlite3ExprDelete(db, pA->pRight); pA->pRight = 0; @@ -116694,9 +122989,9 @@ ** A pointer to a parser. This pointer is used in subsequent calls ** to sqlite3Parser and sqlite3ParserFree. */ -SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(size_t)){ +SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(u64)){ yyParser *pParser; - pParser = (yyParser*)(*mallocProc)( (size_t)sizeof(yyParser) ); + pParser = (yyParser*)(*mallocProc)( (u64)sizeof(yyParser) ); if( pParser ){ pParser->yyidx = -1; #ifdef YYTRACKMAXSTACKDEPTH @@ -117726,9 +124021,6 @@ { SelectDest dest = {SRT_Output, 0, 0, 0, 0, 0}; sqlite3Select(pParse, yymsp[0].minor.yy3, &dest); - sqlite3ExplainBegin(pParse->pVdbe); - sqlite3ExplainSelect(pParse->pVdbe, yymsp[0].minor.yy3); - sqlite3ExplainFinish(pParse->pVdbe); sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy3); } break; @@ -117739,13 +124031,19 @@ int cnt = 0, mxSelect; p->pWith = yymsp[-1].minor.yy59; if( p->pPrior ){ + u16 allValues = SF_Values; pNext = 0; for(pLoop=p; pLoop; pNext=pLoop, pLoop=pLoop->pPrior, cnt++){ pLoop->pNext = pNext; pLoop->selFlags |= SF_Compound; + allValues &= pLoop->selFlags; } - mxSelect = pParse->db->aLimit[SQLITE_LIMIT_COMPOUND_SELECT]; - if( mxSelect && cnt>mxSelect ){ + if( allValues ){ + p->selFlags |= SF_AllValues; + }else if( + (mxSelect = pParse->db->aLimit[SQLITE_LIMIT_COMPOUND_SELECT])>0 + && cnt>mxSelect + ){ sqlite3ErrorMsg(pParse, "too many terms in compound SELECT"); } } @@ -117785,6 +124083,30 @@ case 118: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ { yygotominor.yy3 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy14,yymsp[-5].minor.yy65,yymsp[-4].minor.yy132,yymsp[-3].minor.yy14,yymsp[-2].minor.yy132,yymsp[-1].minor.yy14,yymsp[-7].minor.yy381,yymsp[0].minor.yy476.pLimit,yymsp[0].minor.yy476.pOffset); +#if SELECTTRACE_ENABLED + /* Populate the Select.zSelName[] string that is used to help with + ** query planner debugging, to differentiate between multiple Select + ** objects in a complex query. + ** + ** If the SELECT keyword is immediately followed by a C-style comment + ** then extract the first few alphanumeric characters from within that + ** comment to be the zSelName value. Otherwise, the label is #N where + ** is an integer that is incremented with each SELECT statement seen. + */ + if( yygotominor.yy3!=0 ){ + const char *z = yymsp[-8].minor.yy0.z+6; + int i; + sqlite3_snprintf(sizeof(yygotominor.yy3->zSelName), yygotominor.yy3->zSelName, "#%d", + ++pParse->nSelect); + while( z[0]==' ' ) z++; + if( z[0]=='/' && z[1]=='*' ){ + z += 2; + while( z[0]==' ' ) z++; + for(i=0; sqlite3Isalnum(z[i]); i++){} + sqlite3_snprintf(sizeof(yygotominor.yy3->zSelName), yygotominor.yy3->zSelName, "%.*s", i, z); + } + } +#endif /* SELECTRACE_ENABLED */ } break; case 120: /* values ::= VALUES LP nexprlist RP */ @@ -118217,6 +124539,33 @@ */ yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, &sqlite3IntTokens[yymsp[-3].minor.yy328]); sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy346.pExpr); + }else if( yymsp[-1].minor.yy14->nExpr==1 ){ + /* Expressions of the form: + ** + ** expr1 IN (?1) + ** expr1 NOT IN (?2) + ** + ** with exactly one value on the RHS can be simplified to something + ** like this: + ** + ** expr1 == ?1 + ** expr1 <> ?2 + ** + ** But, the RHS of the == or <> is marked with the EP_Generic flag + ** so that it may not contribute to the computation of comparison + ** affinity or the collating sequence to use for comparison. Otherwise, + ** the semantics would be subtly different from IN or NOT IN. + */ + Expr *pRHS = yymsp[-1].minor.yy14->a[0].pExpr; + yymsp[-1].minor.yy14->a[0].pExpr = 0; + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy14); + /* pRHS cannot be NULL because a malloc error would have been detected + ** before now and control would have never reached this point */ + if( ALWAYS(pRHS) ){ + pRHS->flags &= ~EP_Collate; + pRHS->flags |= EP_Generic; + } + yygotominor.yy346.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy328 ? TK_NE : TK_EQ, yymsp[-4].minor.yy346.pExpr, pRHS, 0); }else{ yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy346.pExpr, 0, 0); if( yygotominor.yy346.pExpr ){ @@ -119224,7 +125573,7 @@ ** end result. ** ** Ticket #1066. the SQL standard does not allow '$' in the -** middle of identfiers. But many SQL implementations do. +** middle of identifiers. But many SQL implementations do. ** SQLite will allow '$' in identifiers for compatibility. ** But the feature is undocumented. */ @@ -119249,6 +125598,7 @@ }; #define IdChar(C) (((c=C)>=0x42 && sqlite3IsEbcdicIdChar[c-0x40])) #endif +SQLITE_PRIVATE int sqlite3IsIdChar(u8 c){ return IdChar(c); } /* @@ -119417,6 +125767,12 @@ testcase( z[0]=='6' ); testcase( z[0]=='7' ); testcase( z[0]=='8' ); testcase( z[0]=='9' ); *tokenType = TK_INTEGER; +#ifndef SQLITE_OMIT_HEX_INTEGER + if( z[0]=='0' && (z[1]=='x' || z[1]=='X') && sqlite3Isxdigit(z[2]) ){ + for(i=3; sqlite3Isxdigit(z[i]); i++){} + return i; + } +#endif for(i=0; sqlite3Isdigit(z[i]); i++){} #ifndef SQLITE_OMIT_FLOATING_POINT if( z[i]=='.' ){ @@ -119531,6 +125887,9 @@ int mxSqlLen; /* Max length of an SQL string */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( zSql==0 || pzErrMsg==0 ) return SQLITE_MISUSE_BKPT; +#endif mxSqlLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH]; if( db->nVdbeActive==0 ){ db->u1.isInterrupted = 0; @@ -119539,7 +125898,7 @@ pParse->zTail = zSql; i = 0; assert( pzErrMsg!=0 ); - pEngine = sqlite3ParserAlloc((void*(*)(size_t))sqlite3Malloc); + pEngine = sqlite3ParserAlloc(sqlite3Malloc); if( pEngine==0 ){ db->mallocFailed = 1; return SQLITE_NOMEM; @@ -119734,7 +126093,7 @@ ** a statement. ** ** (4) CREATE The keyword CREATE has been seen at the beginning of a -** statement, possibly preceeded by EXPLAIN and/or followed by +** statement, possibly preceded by EXPLAIN and/or followed by ** TEMP or TEMPORARY ** ** (5) TRIGGER We are in the middle of a trigger definition that must be @@ -119744,7 +126103,7 @@ ** the end of a trigger definition. ** ** (7) END We've seen the ";END" of the ";END;" that occurs at the end -** of a trigger difinition. +** of a trigger definition. ** ** Transitions between states above are determined by tokens extracted ** from the input. The following tokens are significant: @@ -119787,7 +126146,7 @@ }; #else /* If triggers are not supported by this compile then the statement machine - ** used to detect the end of a statement is much simplier + ** used to detect the end of a statement is much simpler */ static const u8 trans[3][3] = { /* Token: */ @@ -119798,6 +126157,13 @@ }; #endif /* SQLITE_OMIT_TRIGGER */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( zSql==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + while( *zSql ){ switch( *zSql ){ case ';': { /* A semicolon */ @@ -120099,7 +126465,7 @@ ** I/O active are written using this function. These messages ** are intended for debugging activity only. */ -SQLITE_PRIVATE void (*sqlite3IoTrace)(const char*, ...) = 0; +/* not-private */ void (*sqlite3IoTrace)(const char*, ...) = 0; #endif /* @@ -120308,6 +126674,13 @@ ** when this routine is invoked, then this routine is a harmless no-op. */ SQLITE_API int sqlite3_shutdown(void){ +#ifdef SQLITE_OMIT_WSD + int rc = sqlite3_wsd_init(4096, 24); + if( rc!=SQLITE_OK ){ + return rc; + } +#endif + if( sqlite3GlobalConfig.isInit ){ #ifdef SQLITE_EXTRA_SHUTDOWN void SQLITE_EXTRA_SHUTDOWN(void); @@ -120366,71 +126739,103 @@ switch( op ){ /* Mutex configuration options are only available in a threadsafe - ** compile. + ** compile. */ -#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-54466-46756 */ case SQLITE_CONFIG_SINGLETHREAD: { /* Disable all mutexing */ sqlite3GlobalConfig.bCoreMutex = 0; sqlite3GlobalConfig.bFullMutex = 0; break; } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-20520-54086 */ case SQLITE_CONFIG_MULTITHREAD: { /* Disable mutexing of database connections */ /* Enable mutexing of core data structures */ sqlite3GlobalConfig.bCoreMutex = 1; sqlite3GlobalConfig.bFullMutex = 0; break; } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-59593-21810 */ case SQLITE_CONFIG_SERIALIZED: { /* Enable all mutexing */ sqlite3GlobalConfig.bCoreMutex = 1; sqlite3GlobalConfig.bFullMutex = 1; break; } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-63666-48755 */ case SQLITE_CONFIG_MUTEX: { /* Specify an alternative mutex implementation */ sqlite3GlobalConfig.mutex = *va_arg(ap, sqlite3_mutex_methods*); break; } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-14450-37597 */ case SQLITE_CONFIG_GETMUTEX: { /* Retrieve the current mutex implementation */ *va_arg(ap, sqlite3_mutex_methods*) = sqlite3GlobalConfig.mutex; break; } #endif - case SQLITE_CONFIG_MALLOC: { - /* Specify an alternative malloc implementation */ + /* EVIDENCE-OF: R-55594-21030 The SQLITE_CONFIG_MALLOC option takes a + ** single argument which is a pointer to an instance of the + ** sqlite3_mem_methods structure. The argument specifies alternative + ** low-level memory allocation routines to be used in place of the memory + ** allocation routines built into SQLite. */ sqlite3GlobalConfig.m = *va_arg(ap, sqlite3_mem_methods*); break; } case SQLITE_CONFIG_GETMALLOC: { - /* Retrieve the current malloc() implementation */ + /* EVIDENCE-OF: R-51213-46414 The SQLITE_CONFIG_GETMALLOC option takes a + ** single argument which is a pointer to an instance of the + ** sqlite3_mem_methods structure. The sqlite3_mem_methods structure is + ** filled with the currently defined memory allocation routines. */ if( sqlite3GlobalConfig.m.xMalloc==0 ) sqlite3MemSetDefault(); *va_arg(ap, sqlite3_mem_methods*) = sqlite3GlobalConfig.m; break; } case SQLITE_CONFIG_MEMSTATUS: { - /* Enable or disable the malloc status collection */ + /* EVIDENCE-OF: R-61275-35157 The SQLITE_CONFIG_MEMSTATUS option takes + ** single argument of type int, interpreted as a boolean, which enables + ** or disables the collection of memory allocation statistics. */ sqlite3GlobalConfig.bMemstat = va_arg(ap, int); break; } case SQLITE_CONFIG_SCRATCH: { - /* Designate a buffer for scratch memory space */ + /* EVIDENCE-OF: R-08404-60887 There are three arguments to + ** SQLITE_CONFIG_SCRATCH: A pointer an 8-byte aligned memory buffer from + ** which the scratch allocations will be drawn, the size of each scratch + ** allocation (sz), and the maximum number of scratch allocations (N). */ sqlite3GlobalConfig.pScratch = va_arg(ap, void*); sqlite3GlobalConfig.szScratch = va_arg(ap, int); sqlite3GlobalConfig.nScratch = va_arg(ap, int); break; } case SQLITE_CONFIG_PAGECACHE: { - /* Designate a buffer for page cache memory space */ + /* EVIDENCE-OF: R-31408-40510 There are three arguments to + ** SQLITE_CONFIG_PAGECACHE: A pointer to 8-byte aligned memory, the size + ** of each page buffer (sz), and the number of pages (N). */ sqlite3GlobalConfig.pPage = va_arg(ap, void*); sqlite3GlobalConfig.szPage = va_arg(ap, int); sqlite3GlobalConfig.nPage = va_arg(ap, int); break; } + case SQLITE_CONFIG_PCACHE_HDRSZ: { + /* EVIDENCE-OF: R-39100-27317 The SQLITE_CONFIG_PCACHE_HDRSZ option takes + ** a single parameter which is a pointer to an integer and writes into + ** that integer the number of extra bytes per page required for each page + ** in SQLITE_CONFIG_PAGECACHE. */ + *va_arg(ap, int*) = + sqlite3HeaderSizeBtree() + + sqlite3HeaderSizePcache() + + sqlite3HeaderSizePcache1(); + break; + } case SQLITE_CONFIG_PCACHE: { /* no-op */ @@ -120443,21 +126848,33 @@ } case SQLITE_CONFIG_PCACHE2: { - /* Specify an alternative page cache implementation */ + /* EVIDENCE-OF: R-63325-48378 The SQLITE_CONFIG_PCACHE2 option takes a + ** single argument which is a pointer to an sqlite3_pcache_methods2 + ** object. This object specifies the interface to a custom page cache + ** implementation. */ sqlite3GlobalConfig.pcache2 = *va_arg(ap, sqlite3_pcache_methods2*); break; } case SQLITE_CONFIG_GETPCACHE2: { + /* EVIDENCE-OF: R-22035-46182 The SQLITE_CONFIG_GETPCACHE2 option takes a + ** single argument which is a pointer to an sqlite3_pcache_methods2 + ** object. SQLite copies of the current page cache implementation into + ** that object. */ if( sqlite3GlobalConfig.pcache2.xInit==0 ){ sqlite3PCacheSetDefault(); } *va_arg(ap, sqlite3_pcache_methods2*) = sqlite3GlobalConfig.pcache2; break; } +/* EVIDENCE-OF: R-06626-12911 The SQLITE_CONFIG_HEAP option is only +** available if SQLite is compiled with either SQLITE_ENABLE_MEMSYS3 or +** SQLITE_ENABLE_MEMSYS5 and returns SQLITE_ERROR if invoked otherwise. */ #if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5) case SQLITE_CONFIG_HEAP: { - /* Designate a buffer for heap memory space */ + /* EVIDENCE-OF: R-19854-42126 There are three arguments to + ** SQLITE_CONFIG_HEAP: An 8-byte aligned pointer to the memory, the + ** number of bytes in the memory buffer, and the minimum allocation size. */ sqlite3GlobalConfig.pHeap = va_arg(ap, void*); sqlite3GlobalConfig.nHeap = va_arg(ap, int); sqlite3GlobalConfig.mnReq = va_arg(ap, int); @@ -120470,17 +126887,19 @@ } if( sqlite3GlobalConfig.pHeap==0 ){ - /* If the heap pointer is NULL, then restore the malloc implementation - ** back to NULL pointers too. This will cause the malloc to go - ** back to its default implementation when sqlite3_initialize() is - ** run. + /* EVIDENCE-OF: R-49920-60189 If the first pointer (the memory pointer) + ** is NULL, then SQLite reverts to using its default memory allocator + ** (the system malloc() implementation), undoing any prior invocation of + ** SQLITE_CONFIG_MALLOC. + ** + ** Setting sqlite3GlobalConfig.m to all zeros will cause malloc to + ** revert to its default implementation when sqlite3_initialize() is run */ memset(&sqlite3GlobalConfig.m, 0, sizeof(sqlite3GlobalConfig.m)); }else{ - /* The heap pointer is not NULL, then install one of the - ** mem5.c/mem3.c methods. The enclosing #if guarantees at - ** least one of these methods is currently enabled. - */ + /* EVIDENCE-OF: R-61006-08918 If the memory pointer is not NULL then the + ** alternative memory allocator is engaged to handle all of SQLites + ** memory allocation needs. */ #ifdef SQLITE_ENABLE_MEMSYS3 sqlite3GlobalConfig.m = *sqlite3MemGetMemsys3(); #endif @@ -120513,12 +126932,25 @@ break; } + /* EVIDENCE-OF: R-55548-33817 The compile-time setting for URI filenames + ** can be changed at start-time using the + ** sqlite3_config(SQLITE_CONFIG_URI,1) or + ** sqlite3_config(SQLITE_CONFIG_URI,0) configuration calls. + */ case SQLITE_CONFIG_URI: { + /* EVIDENCE-OF: R-25451-61125 The SQLITE_CONFIG_URI option takes a single + ** argument of type int. If non-zero, then URI handling is globally + ** enabled. If the parameter is zero, then URI handling is globally + ** disabled. */ sqlite3GlobalConfig.bOpenUri = va_arg(ap, int); break; } case SQLITE_CONFIG_COVERING_INDEX_SCAN: { + /* EVIDENCE-OF: R-36592-02772 The SQLITE_CONFIG_COVERING_INDEX_SCAN + ** option takes a single integer argument which is interpreted as a + ** boolean in order to enable or disable the use of covering indices for + ** full table scans in the query optimizer. */ sqlite3GlobalConfig.bUseCis = va_arg(ap, int); break; } @@ -120533,25 +126965,43 @@ #endif case SQLITE_CONFIG_MMAP_SIZE: { + /* EVIDENCE-OF: R-58063-38258 SQLITE_CONFIG_MMAP_SIZE takes two 64-bit + ** integer (sqlite3_int64) values that are the default mmap size limit + ** (the default setting for PRAGMA mmap_size) and the maximum allowed + ** mmap size limit. */ sqlite3_int64 szMmap = va_arg(ap, sqlite3_int64); sqlite3_int64 mxMmap = va_arg(ap, sqlite3_int64); - if( mxMmap<0 || mxMmap>SQLITE_MAX_MMAP_SIZE ){ - mxMmap = SQLITE_MAX_MMAP_SIZE; - } - sqlite3GlobalConfig.mxMmap = mxMmap; + /* EVIDENCE-OF: R-53367-43190 If either argument to this option is + ** negative, then that argument is changed to its compile-time default. + ** + ** EVIDENCE-OF: R-34993-45031 The maximum allowed mmap size will be + ** silently truncated if necessary so that it does not exceed the + ** compile-time maximum mmap size set by the SQLITE_MAX_MMAP_SIZE + ** compile-time option. + */ + if( mxMmap<0 || mxMmap>SQLITE_MAX_MMAP_SIZE ) mxMmap = SQLITE_MAX_MMAP_SIZE; if( szMmap<0 ) szMmap = SQLITE_DEFAULT_MMAP_SIZE; if( szMmap>mxMmap) szMmap = mxMmap; + sqlite3GlobalConfig.mxMmap = mxMmap; sqlite3GlobalConfig.szMmap = szMmap; break; } -#if SQLITE_OS_WIN && defined(SQLITE_WIN32_MALLOC) +#if SQLITE_OS_WIN && defined(SQLITE_WIN32_MALLOC) /* IMP: R-04780-55815 */ case SQLITE_CONFIG_WIN32_HEAPSIZE: { + /* EVIDENCE-OF: R-34926-03360 SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit + ** unsigned integer value that specifies the maximum size of the created + ** heap. */ sqlite3GlobalConfig.nHeap = va_arg(ap, int); break; } #endif + case SQLITE_CONFIG_PMASZ: { + sqlite3GlobalConfig.szPma = va_arg(ap, unsigned int); + break; + } + default: { rc = SQLITE_ERROR; break; @@ -120630,6 +127080,12 @@ ** Return the mutex associated with a database connection. */ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif return db->mutex; } @@ -120639,6 +127095,10 @@ */ SQLITE_API int sqlite3_db_release_memory(sqlite3 *db){ int i; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); sqlite3BtreeEnterAll(db); for(i=0; inDb; i++){ @@ -120728,13 +127188,20 @@ ){ int rc, n; n = nKey1lastRowid; } /* ** Return the number of changes in the most recent call to sqlite3_exec(). */ SQLITE_API int sqlite3_changes(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif return db->nChange; } /* ** Return the number of changes since the database handle was opened. */ SQLITE_API int sqlite3_total_changes(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif return db->nTotalChange; } @@ -120837,6 +127322,7 @@ } } } + sqlite3VtabUnlockList(db); sqlite3BtreeLeaveAll(db); #else UNUSED_PARAMETER(db); @@ -120863,6 +127349,8 @@ */ static int sqlite3Close(sqlite3 *db, int forceZombie){ if( !db ){ + /* EVIDENCE-OF: R-63257-11740 Calling sqlite3_close() or + ** sqlite3_close_v2() with a NULL pointer argument is a harmless no-op. */ return SQLITE_OK; } if( !sqlite3SafetyCheckSickOrOk(db) ){ @@ -120886,7 +127374,7 @@ ** SQLITE_BUSY if the connection can not be closed immediately. */ if( !forceZombie && connectionIsBusy(db) ){ - sqlite3Error(db, SQLITE_BUSY, "unable to close due to unfinalized " + sqlite3ErrorWithMsg(db, SQLITE_BUSY, "unable to close due to unfinalized " "statements or unfinished backups"); sqlite3_mutex_leave(db->mutex); return SQLITE_BUSY; @@ -121016,9 +127504,13 @@ sqlite3HashClear(&db->aModule); #endif - sqlite3Error(db, SQLITE_OK, 0); /* Deallocates any cached error strings. */ + sqlite3Error(db, SQLITE_OK); /* Deallocates any cached error strings. */ sqlite3ValueFree(db->pErr); sqlite3CloseExtensions(db); +#if SQLITE_USER_AUTHENTICATION + sqlite3_free(db->auth.zAuthUser); + sqlite3_free(db->auth.zAuthPW); +#endif db->magic = SQLITE_MAGIC_ERROR; @@ -121041,13 +127533,15 @@ /* ** Rollback all database files. If tripCode is not SQLITE_OK, then -** any open cursors are invalidated ("tripped" - as in "tripping a circuit +** any write cursors are invalidated ("tripped" - as in "tripping a circuit ** breaker") and made to return tripCode if there are any further -** attempts to use that cursor. +** attempts to use that cursor. Read cursors remain open and valid +** but are "saved" in case the table pages are moved around. */ SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3 *db, int tripCode){ int i; int inTrans = 0; + int schemaChange; assert( sqlite3_mutex_held(db->mutex) ); sqlite3BeginBenignMalloc(); @@ -121058,14 +127552,15 @@ ** the database rollback and schema reset, which can cause false ** corruption reports in some cases. */ sqlite3BtreeEnterAll(db); + schemaChange = (db->flags & SQLITE_InternChanges)!=0 && db->init.busy==0; for(i=0; inDb; i++){ Btree *p = db->aDb[i].pBt; if( p ){ if( sqlite3BtreeIsInTrans(p) ){ inTrans = 1; } - sqlite3BtreeRollback(p, tripCode); + sqlite3BtreeRollback(p, tripCode, !schemaChange); } } sqlite3VtabRollback(db); @@ -121092,7 +127587,7 @@ ** Return a static string containing the name corresponding to the error code ** specified in the argument. */ -#if defined(SQLITE_TEST) +#if (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) || defined(SQLITE_TEST) SQLITE_PRIVATE const char *sqlite3ErrName(int rc){ const char *zName = 0; int i, origRc = rc; @@ -121127,7 +127622,6 @@ case SQLITE_IOERR_UNLOCK: zName = "SQLITE_IOERR_UNLOCK"; break; case SQLITE_IOERR_RDLOCK: zName = "SQLITE_IOERR_RDLOCK"; break; case SQLITE_IOERR_DELETE: zName = "SQLITE_IOERR_DELETE"; break; - case SQLITE_IOERR_BLOCKED: zName = "SQLITE_IOERR_BLOCKED"; break; case SQLITE_IOERR_NOMEM: zName = "SQLITE_IOERR_NOMEM"; break; case SQLITE_IOERR_ACCESS: zName = "SQLITE_IOERR_ACCESS"; break; case SQLITE_IOERR_CHECKRESERVEDLOCK: @@ -121259,7 +127753,7 @@ void *ptr, /* Database connection */ int count /* Number of times table has been busy */ ){ -#if SQLITE_OS_WIN || (defined(HAVE_USLEEP) && HAVE_USLEEP) +#if SQLITE_OS_WIN || HAVE_USLEEP static const u8 delays[] = { 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 }; static const u8 totals[] = @@ -121322,6 +127816,9 @@ int (*xBusy)(void*,int), void *pArg ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE; +#endif sqlite3_mutex_enter(db->mutex); db->busyHandler.xFunc = xBusy; db->busyHandler.pArg = pArg; @@ -121343,6 +127840,12 @@ int (*xProgress)(void*), void *pArg ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return; + } +#endif sqlite3_mutex_enter(db->mutex); if( nOps>0 ){ db->xProgress = xProgress; @@ -121363,6 +127866,9 @@ ** specified number of milliseconds before returning 0. */ SQLITE_API int sqlite3_busy_timeout(sqlite3 *db, int ms){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif if( ms>0 ){ sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db); db->busyTimeout = ms; @@ -121376,6 +127882,12 @@ ** Cause any pending operation to stop at its earliest opportunity. */ SQLITE_API void sqlite3_interrupt(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return; + } +#endif db->u1.isInterrupted = 1; } @@ -121450,7 +127962,7 @@ p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 0); if( p && (p->funcFlags & SQLITE_FUNC_ENCMASK)==enc && p->nArg==nArg ){ if( db->nVdbeActive ){ - sqlite3Error(db, SQLITE_BUSY, + sqlite3ErrorWithMsg(db, SQLITE_BUSY, "unable to delete/modify user-function due to active statements"); assert( !db->mallocFailed ); return SQLITE_BUSY; @@ -121513,6 +128025,12 @@ ){ int rc = SQLITE_ERROR; FuncDestructor *pArg = 0; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif sqlite3_mutex_enter(db->mutex); if( xDestroy ){ pArg = (FuncDestructor *)sqlite3DbMallocZero(db, sizeof(FuncDestructor)); @@ -121549,6 +128067,10 @@ ){ int rc; char *zFunc8; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zFunctionName==0 ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); assert( !db->mallocFailed ); zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1, SQLITE_UTF16NATIVE); @@ -121580,6 +128102,12 @@ ){ int nName = sqlite3Strlen30(zName); int rc = SQLITE_OK; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 || nArg<-2 ){ + return SQLITE_MISUSE_BKPT; + } +#endif sqlite3_mutex_enter(db->mutex); if( sqlite3FindFunction(db, zName, nName, nArg, SQLITE_UTF8, 0)==0 ){ rc = sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8, @@ -121601,6 +128129,13 @@ */ SQLITE_API void *sqlite3_trace(sqlite3 *db, void (*xTrace)(void*,const char*), void *pArg){ void *pOld; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(db->mutex); pOld = db->pTraceArg; db->xTrace = xTrace; @@ -121622,6 +128157,13 @@ void *pArg ){ void *pOld; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(db->mutex); pOld = db->pProfileArg; db->xProfile = xProfile; @@ -121642,6 +128184,13 @@ void *pArg /* Argument to the function */ ){ void *pOld; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(db->mutex); pOld = db->pCommitArg; db->xCommitCallback = xCallback; @@ -121660,6 +128209,13 @@ void *pArg /* Argument to the function */ ){ void *pRet; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(db->mutex); pRet = db->pUpdateArg; db->xUpdateCallback = xCallback; @@ -121678,6 +128234,13 @@ void *pArg /* Argument to the function */ ){ void *pRet; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(db->mutex); pRet = db->pRollbackArg; db->xRollbackCallback = xCallback; @@ -121724,6 +128287,9 @@ UNUSED_PARAMETER(db); UNUSED_PARAMETER(nFrame); #else +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif if( nFrame>0 ){ sqlite3_wal_hook(db, sqlite3WalDefaultHook, SQLITE_INT_TO_PTR(nFrame)); }else{ @@ -121744,6 +128310,12 @@ ){ #ifndef SQLITE_OMIT_WAL void *pRet; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif sqlite3_mutex_enter(db->mutex); pRet = db->pWalArg; db->xWalCallback = xCallback; @@ -121771,14 +128343,21 @@ int rc; /* Return code */ int iDb = SQLITE_MAX_ATTACHED; /* sqlite3.aDb[] index of db to checkpoint */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + /* Initialize the output variables to -1 in case an error occurs. */ if( pnLog ) *pnLog = -1; if( pnCkpt ) *pnCkpt = -1; - assert( SQLITE_CHECKPOINT_FULL>SQLITE_CHECKPOINT_PASSIVE ); - assert( SQLITE_CHECKPOINT_FULLSQLITE_CHECKPOINT_RESTART ){ + assert( SQLITE_CHECKPOINT_PASSIVE==0 ); + assert( SQLITE_CHECKPOINT_FULL==1 ); + assert( SQLITE_CHECKPOINT_RESTART==2 ); + assert( SQLITE_CHECKPOINT_TRUNCATE==3 ); + if( eModeSQLITE_CHECKPOINT_TRUNCATE ){ + /* EVIDENCE-OF: R-03996-12088 The M parameter must be a valid checkpoint + ** mode: */ return SQLITE_MISUSE; } @@ -121788,10 +128367,10 @@ } if( iDb<0 ){ rc = SQLITE_ERROR; - sqlite3Error(db, SQLITE_ERROR, "unknown database: %s", zDb); + sqlite3ErrorWithMsg(db, SQLITE_ERROR, "unknown database: %s", zDb); }else{ rc = sqlite3Checkpoint(db, iDb, eMode, pnLog, pnCkpt); - sqlite3Error(db, rc, 0); + sqlite3Error(db, rc); } rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); @@ -121806,7 +128385,9 @@ ** checkpointed. */ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){ - return sqlite3_wal_checkpoint_v2(db, zDb, SQLITE_CHECKPOINT_PASSIVE, 0, 0); + /* EVIDENCE-OF: R-41613-20553 The sqlite3_wal_checkpoint(D,X) is equivalent to + ** sqlite3_wal_checkpoint_v2(D,X,SQLITE_CHECKPOINT_PASSIVE,0,0). */ + return sqlite3_wal_checkpoint_v2(db,zDb,SQLITE_CHECKPOINT_PASSIVE,0,0); } #ifndef SQLITE_OMIT_WAL @@ -121946,7 +128527,7 @@ }else{ z = sqlite3_value_text16(db->pErr); if( z==0 ){ - sqlite3Error(db, db->errCode, sqlite3ErrStr(db->errCode)); + sqlite3ErrorWithMsg(db, db->errCode, sqlite3ErrStr(db->errCode)); z = sqlite3_value_text16(db->pErr); } /* A malloc() may have failed within the call to sqlite3_value_text16() @@ -121994,32 +128575,6 @@ } /* -** Invalidate all cached KeyInfo objects for database connection "db" -*/ -static void invalidateCachedKeyInfo(sqlite3 *db){ - Db *pDb; /* A single database */ - int iDb; /* The database index number */ - HashElem *k; /* For looping over tables in pDb */ - Table *pTab; /* A table in the database */ - Index *pIdx; /* Each index */ - - for(iDb=0, pDb=db->aDb; iDbnDb; iDb++, pDb++){ - if( pDb->pBt==0 ) continue; - sqlite3BtreeEnter(pDb->pBt); - for(k=sqliteHashFirst(&pDb->pSchema->tblHash); k; k=sqliteHashNext(k)){ - pTab = (Table*)sqliteHashData(k); - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->pKeyInfo && pIdx->pKeyInfo->db==db ){ - sqlite3KeyInfoUnref(pIdx->pKeyInfo); - pIdx->pKeyInfo = 0; - } - } - } - sqlite3BtreeLeave(pDb->pBt); - } -} - -/* ** Create a new collating function for database "db". The name is zName ** and the encoding is enc. */ @@ -122033,7 +128588,6 @@ ){ CollSeq *pColl; int enc2; - int nName = sqlite3Strlen30(zName); assert( sqlite3_mutex_held(db->mutex) ); @@ -122058,12 +128612,11 @@ pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 0); if( pColl && pColl->xCmp ){ if( db->nVdbeActive ){ - sqlite3Error(db, SQLITE_BUSY, + sqlite3ErrorWithMsg(db, SQLITE_BUSY, "unable to delete/modify collation sequence due to active statements"); return SQLITE_BUSY; } sqlite3ExpirePreparedStatements(db); - invalidateCachedKeyInfo(db); /* If collation sequence pColl was created directly by a call to ** sqlite3_create_collation, and not generated by synthCollSeq(), @@ -122072,7 +128625,7 @@ ** to be called. */ if( (pColl->enc & ~SQLITE_UTF16_ALIGNED)==enc2 ){ - CollSeq *aColl = sqlite3HashFind(&db->aCollSeq, zName, nName); + CollSeq *aColl = sqlite3HashFind(&db->aCollSeq, zName); int j; for(j=0; j<3; j++){ CollSeq *p = &aColl[j]; @@ -122092,7 +128645,7 @@ pColl->pUser = pCtx; pColl->xDel = xDel; pColl->enc = (u8)(enc2 | (enc & SQLITE_UTF16_ALIGNED)); - sqlite3Error(db, SQLITE_OK, 0); + sqlite3Error(db, SQLITE_OK); return SQLITE_OK; } @@ -122112,8 +128665,9 @@ SQLITE_MAX_FUNCTION_ARG, SQLITE_MAX_ATTACHED, SQLITE_MAX_LIKE_PATTERN_LENGTH, - SQLITE_MAX_VARIABLE_NUMBER, + SQLITE_MAX_VARIABLE_NUMBER, /* IMP: R-38091-32352 */ SQLITE_MAX_TRIGGER_DEPTH, + SQLITE_MAX_WORKER_THREADS, }; /* @@ -122137,8 +128691,8 @@ #if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>1000 # error SQLITE_MAX_FUNCTION_ARG must be between 0 and 1000 #endif -#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>62 -# error SQLITE_MAX_ATTACHED must be between 0 and 62 +#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>125 +# error SQLITE_MAX_ATTACHED must be between 0 and 125 #endif #if SQLITE_MAX_LIKE_PATTERN_LENGTH<1 # error SQLITE_MAX_LIKE_PATTERN_LENGTH must be at least 1 @@ -122149,6 +128703,9 @@ #if SQLITE_MAX_TRIGGER_DEPTH<1 # error SQLITE_MAX_TRIGGER_DEPTH must be at least 1 #endif +#if SQLITE_MAX_WORKER_THREADS<0 || SQLITE_MAX_WORKER_THREADS>50 +# error SQLITE_MAX_WORKER_THREADS must be between 0 and 50 +#endif /* @@ -122164,6 +128721,12 @@ SQLITE_API int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){ int oldLimit; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return -1; + } +#endif /* EVIDENCE-OF: R-30189-54097 For each limit category SQLITE_LIMIT_NAME ** there is a hard upper bound set at compile-time by a C preprocessor @@ -122182,7 +128745,8 @@ SQLITE_MAX_LIKE_PATTERN_LENGTH ); assert( aHardLimit[SQLITE_LIMIT_VARIABLE_NUMBER]==SQLITE_MAX_VARIABLE_NUMBER); assert( aHardLimit[SQLITE_LIMIT_TRIGGER_DEPTH]==SQLITE_MAX_TRIGGER_DEPTH ); - assert( SQLITE_LIMIT_TRIGGER_DEPTH==(SQLITE_N_LIMIT-1) ); + assert( aHardLimit[SQLITE_LIMIT_WORKER_THREADS]==SQLITE_MAX_WORKER_THREADS ); + assert( SQLITE_LIMIT_WORKER_THREADS==(SQLITE_N_LIMIT-1) ); if( limitId<0 || limitId>=SQLITE_N_LIMIT ){ @@ -122239,8 +128803,9 @@ assert( *pzErrMsg==0 ); - if( ((flags & SQLITE_OPEN_URI) || sqlite3GlobalConfig.bOpenUri) - && nUri>=5 && memcmp(zUri, "file:", 5)==0 + if( ((flags & SQLITE_OPEN_URI) /* IMP: R-48725-32206 */ + || sqlite3GlobalConfig.bOpenUri) /* IMP: R-51689-46548 */ + && nUri>=5 && memcmp(zUri, "file:", 5)==0 /* IMP: R-57884-37496 */ ){ char *zOpt; int eState; /* Parser state when parsing URI */ @@ -122448,6 +129013,9 @@ char *zOpen = 0; /* Filename argument to pass to BtreeOpen() */ char *zErrMsg = 0; /* Error message from sqlite3ParseUri() */ +#ifdef SQLITE_ENABLE_API_ARMOR + if( ppDb==0 ) return SQLITE_MISUSE_BKPT; +#endif *ppDb = 0; #ifndef SQLITE_OMIT_AUTOINIT rc = sqlite3_initialize(); @@ -122470,7 +129038,9 @@ testcase( (1<<(flags&7))==0x02 ); /* READONLY */ testcase( (1<<(flags&7))==0x04 ); /* READWRITE */ testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */ - if( ((1<<(flags&7)) & 0x46)==0 ) return SQLITE_MISUSE_BKPT; + if( ((1<<(flags&7)) & 0x46)==0 ){ + return SQLITE_MISUSE_BKPT; /* IMP: R-65497-44594 */ + } if( sqlite3GlobalConfig.bCoreMutex==0 ){ isThreadsafe = 0; @@ -122529,10 +129099,12 @@ assert( sizeof(db->aLimit)==sizeof(aHardLimit) ); memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit)); + db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS; db->autoCommit = 1; db->nextAutovac = -1; db->szMmap = sqlite3GlobalConfig.szMmap; db->nextPagesize = 0; + db->nMaxSorterMmap = 0x7FFFFFFF; db->flags |= SQLITE_ShortColNames | SQLITE_EnableTrigger | SQLITE_CacheSpill #if !defined(SQLITE_DEFAULT_AUTOMATIC_INDEX) || SQLITE_DEFAULT_AUTOMATIC_INDEX | SQLITE_AutoIndex @@ -122549,6 +129121,9 @@ #if defined(SQLITE_DEFAULT_FOREIGN_KEYS) && SQLITE_DEFAULT_FOREIGN_KEYS | SQLITE_ForeignKeys #endif +#if defined(SQLITE_REVERSE_UNORDERED_SELECTS) + | SQLITE_ReverseOrder +#endif ; sqlite3HashInit(&db->aCollSeq); #ifndef SQLITE_OMIT_VIRTUALTABLE @@ -122558,26 +129133,30 @@ /* Add the default collation sequence BINARY. BINARY works for both UTF-8 ** and UTF-16, so add a version for each to avoid any unnecessary ** conversions. The only error that can occur here is a malloc() failure. + ** + ** EVIDENCE-OF: R-52786-44878 SQLite defines three built-in collating + ** functions: */ createCollation(db, "BINARY", SQLITE_UTF8, 0, binCollFunc, 0); createCollation(db, "BINARY", SQLITE_UTF16BE, 0, binCollFunc, 0); createCollation(db, "BINARY", SQLITE_UTF16LE, 0, binCollFunc, 0); + createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0); createCollation(db, "RTRIM", SQLITE_UTF8, (void*)1, binCollFunc, 0); if( db->mallocFailed ){ goto opendb_out; } + /* EVIDENCE-OF: R-08308-17224 The default collating function for all + ** strings is BINARY. + */ db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 0); assert( db->pDfltColl!=0 ); - /* Also add a UTF-8 case-insensitive collation sequence. */ - createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0); - /* Parse the filename/URI argument. */ db->openFlags = flags; rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg); if( rc!=SQLITE_OK ){ if( rc==SQLITE_NOMEM ) db->mallocFailed = 1; - sqlite3Error(db, rc, zErrMsg ? "%s" : 0, zErrMsg); + sqlite3ErrorWithMsg(db, rc, zErrMsg ? "%s" : 0, zErrMsg); sqlite3_free(zErrMsg); goto opendb_out; } @@ -122589,13 +129168,15 @@ if( rc==SQLITE_IOERR_NOMEM ){ rc = SQLITE_NOMEM; } - sqlite3Error(db, rc, 0); + sqlite3Error(db, rc); goto opendb_out; } + sqlite3BtreeEnter(db->aDb[0].pBt); db->aDb[0].pSchema = sqlite3SchemaGet(db, db->aDb[0].pBt); + if( !db->mallocFailed ) ENC(db) = SCHEMA_ENC(db); + sqlite3BtreeLeave(db->aDb[0].pBt); db->aDb[1].pSchema = sqlite3SchemaGet(db, 0); - /* The default safety_level for the main database is 'full'; for the temp ** database it is 'NONE'. This matches the pager layer defaults. */ @@ -122613,7 +129194,7 @@ ** database schema yet. This is delayed until the first time the database ** is accessed. */ - sqlite3Error(db, SQLITE_OK, 0); + sqlite3Error(db, SQLITE_OK); sqlite3RegisterBuiltinFunctions(db); /* Load automatic extensions - extensions that have been registered @@ -122670,7 +129251,7 @@ SQLITE_DEFAULT_LOCKING_MODE); #endif - if( rc ) sqlite3Error(db, rc, 0); + if( rc ) sqlite3Error(db, rc); /* Enable the lookaside-malloc subsystem */ setupLookaside(db, 0, sqlite3GlobalConfig.szLookaside, @@ -122734,13 +129315,15 @@ sqlite3_value *pVal; int rc; - assert( zFilename ); - assert( ppDb ); +#ifdef SQLITE_ENABLE_API_ARMOR + if( ppDb==0 ) return SQLITE_MISUSE_BKPT; +#endif *ppDb = 0; #ifndef SQLITE_OMIT_AUTOINIT rc = sqlite3_initialize(); if( rc ) return rc; #endif + if( zFilename==0 ) zFilename = "\000\000"; pVal = sqlite3ValueNew(0); sqlite3ValueSetStr(pVal, -1, zFilename, SQLITE_UTF16NATIVE, SQLITE_STATIC); zFilename8 = sqlite3ValueText(pVal, SQLITE_UTF8); @@ -122749,7 +129332,7 @@ SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); assert( *ppDb || rc==SQLITE_NOMEM ); if( rc==SQLITE_OK && !DbHasProperty(*ppDb, 0, DB_SchemaLoaded) ){ - ENC(*ppDb) = SQLITE_UTF16NATIVE; + SCHEMA_ENC(*ppDb) = ENC(*ppDb) = SQLITE_UTF16NATIVE; } }else{ rc = SQLITE_NOMEM; @@ -122770,13 +129353,7 @@ void* pCtx, int(*xCompare)(void*,int,const void*,int,const void*) ){ - int rc; - sqlite3_mutex_enter(db->mutex); - assert( !db->mallocFailed ); - rc = createCollation(db, zName, (u8)enc, pCtx, xCompare, 0); - rc = sqlite3ApiExit(db, rc); - sqlite3_mutex_leave(db->mutex); - return rc; + return sqlite3_create_collation_v2(db, zName, enc, pCtx, xCompare, 0); } /* @@ -122791,6 +129368,10 @@ void(*xDel)(void*) ){ int rc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); assert( !db->mallocFailed ); rc = createCollation(db, zName, (u8)enc, pCtx, xCompare, xDel); @@ -122812,6 +129393,10 @@ ){ int rc = SQLITE_OK; char *zName8; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); assert( !db->mallocFailed ); zName8 = sqlite3Utf16to8(db, zName, -1, SQLITE_UTF16NATIVE); @@ -122834,6 +129419,9 @@ void *pCollNeededArg, void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*) ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); db->xCollNeeded = xCollNeeded; db->xCollNeeded16 = 0; @@ -122852,6 +129440,9 @@ void *pCollNeededArg, void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*) ){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); db->xCollNeeded = 0; db->xCollNeeded16 = xCollNeeded16; @@ -122878,13 +129469,19 @@ ** by the next COMMIT or ROLLBACK. */ SQLITE_API int sqlite3_get_autocommit(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif return db->autoCommit; } /* -** The following routines are subtitutes for constants SQLITE_CORRUPT, +** The following routines are substitutes for constants SQLITE_CORRUPT, ** SQLITE_MISUSE, SQLITE_CANTOPEN, SQLITE_IOERR and possibly other error -** constants. They server two purposes: +** constants. They serve two purposes: ** ** 1. Serve as a convenient place to set a breakpoint in a debugger ** to detect when version error conditions occurs. @@ -122931,7 +129528,6 @@ ** Return meta information about a specific column of a database table. ** See comment in sqlite3.h (sqlite.h.in) for details. */ -#ifdef SQLITE_ENABLE_COLUMN_METADATA SQLITE_API int sqlite3_table_column_metadata( sqlite3 *db, /* Connection handle */ const char *zDbName, /* Database name or NULL */ @@ -122947,7 +129543,7 @@ char *zErrMsg = 0; Table *pTab = 0; Column *pCol = 0; - int iCol; + int iCol = 0; char const *zDataType = 0; char const *zCollSeq = 0; @@ -122971,11 +129567,8 @@ } /* Find the column for which info is requested */ - if( sqlite3IsRowid(zColumnName) ){ - iCol = pTab->iPKey; - if( iCol>=0 ){ - pCol = &pTab->aCol[iCol]; - } + if( zColumnName==0 ){ + /* Query for existance of table only */ }else{ for(iCol=0; iColnCol; iCol++){ pCol = &pTab->aCol[iCol]; @@ -122984,8 +129577,13 @@ } } if( iCol==pTab->nCol ){ - pTab = 0; - goto error_out; + if( HasRowid(pTab) && sqlite3IsRowid(zColumnName) ){ + iCol = pTab->iPKey; + pCol = iCol>=0 ? &pTab->aCol[iCol] : 0; + }else{ + pTab = 0; + goto error_out; + } } } @@ -123032,13 +129630,12 @@ zColumnName); rc = SQLITE_ERROR; } - sqlite3Error(db, rc, (zErrMsg?"%s":0), zErrMsg); + sqlite3ErrorWithMsg(db, rc, (zErrMsg?"%s":0), zErrMsg); sqlite3DbFree(db, zErrMsg); rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; } -#endif /* ** Sleep for a little while. Return the amount of time slept. @@ -123060,6 +129657,9 @@ ** Enable or disable the extended result codes. */ SQLITE_API int sqlite3_extended_result_codes(sqlite3 *db, int onoff){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); db->errMask = onoff ? 0xffffffff : 0xff; sqlite3_mutex_leave(db->mutex); @@ -123073,6 +129673,9 @@ int rc = SQLITE_ERROR; Btree *pBtree; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif sqlite3_mutex_enter(db->mutex); pBtree = sqlite3DbNameToBtree(db, zDbName); if( pBtree ){ @@ -123151,6 +129754,28 @@ } /* + ** sqlite3_test_control(FAULT_INSTALL, xCallback) + ** + ** Arrange to invoke xCallback() whenever sqlite3FaultSim() is called, + ** if xCallback is not NULL. + ** + ** As a test of the fault simulator mechanism itself, sqlite3FaultSim(0) + ** is called immediately after installing the new callback and the return + ** value from sqlite3FaultSim(0) becomes the return from + ** sqlite3_test_control(). + */ + case SQLITE_TESTCTRL_FAULT_INSTALL: { + /* MSVC is picky about pulling func ptrs from va lists. + ** http://support.microsoft.com/kb/47961 + ** sqlite3GlobalConfig.xTestCallback = va_arg(ap, int(*)(int)); + */ + typedef int(*TESTCALLBACKFUNC_t)(int); + sqlite3GlobalConfig.xTestCallback = va_arg(ap, TESTCALLBACKFUNC_t); + rc = sqlite3FaultSim(0); + break; + } + + /* ** sqlite3_test_control(BENIGN_MALLOC_HOOKS, xBegin, xEnd) ** ** Register hooks to call to indicate which malloc() failures @@ -123176,7 +129801,7 @@ ** IMPORTANT: Changing the PENDING byte from 0x40000000 results in ** an incompatible database file format. Changing the PENDING byte ** while any database connection is open results in undefined and - ** dileterious behavior. + ** deleterious behavior. */ case SQLITE_TESTCTRL_PENDING_BYTE: { rc = PENDING_BYTE; @@ -123241,6 +129866,22 @@ break; } + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_BYTEORDER); + ** + ** The integer returned reveals the byte-order of the computer on which + ** SQLite is running: + ** + ** 1 big-endian, determined at run-time + ** 10 little-endian, determined at run-time + ** 432101 big-endian, determined at compile-time + ** 123410 little-endian, determined at compile-time + */ + case SQLITE_TESTCTRL_BYTEORDER: { + rc = SQLITE_BYTEORDER*100 + SQLITE_LITTLEENDIAN*10 + SQLITE_BIGENDIAN; + break; + } + /* sqlite3_test_control(SQLITE_TESTCTRL_RESERVE, sqlite3 *db, int N) ** ** Set the nReserve size to N for the main database on the database @@ -123315,22 +129956,6 @@ break; } -#if defined(SQLITE_ENABLE_TREE_EXPLAIN) - /* sqlite3_test_control(SQLITE_TESTCTRL_EXPLAIN_STMT, - ** sqlite3_stmt*,const char**); - ** - ** If compiled with SQLITE_ENABLE_TREE_EXPLAIN, each sqlite3_stmt holds - ** a string that describes the optimized parse tree. This test-control - ** returns a pointer to that string. - */ - case SQLITE_TESTCTRL_EXPLAIN_STMT: { - sqlite3_stmt *pStmt = va_arg(ap, sqlite3_stmt*); - const char **pzRet = va_arg(ap, const char**); - *pzRet = sqlite3VdbeExplanation((Vdbe*)pStmt); - break; - } -#endif - /* sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, int); ** ** Set or clear a flag that indicates that the database file is always well- @@ -123359,6 +129984,22 @@ break; } + /* sqlite3_test_control(SQLITE_TESTCTRL_SORTER_MMAP, db, nMax); */ + case SQLITE_TESTCTRL_SORTER_MMAP: { + sqlite3 *db = va_arg(ap, sqlite3*); + db->nMaxSorterMmap = va_arg(ap, int); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_ISINIT); + ** + ** Return SQLITE_OK if SQLite has been initialized and SQLITE_ERROR if + ** not. + */ + case SQLITE_TESTCTRL_ISINIT: { + if( sqlite3GlobalConfig.isInit==0 ) rc = SQLITE_ERROR; + break; + } } va_end(ap); #endif /* SQLITE_OMIT_BUILTIN_TEST */ @@ -123377,7 +130018,7 @@ ** returns a NULL pointer. */ SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam){ - if( zFilename==0 ) return 0; + if( zFilename==0 || zParam==0 ) return 0; zFilename += sqlite3Strlen30(zFilename) + 1; while( zFilename[0] ){ int x = strcmp(zFilename, zParam); @@ -123407,7 +130048,7 @@ ){ const char *z = sqlite3_uri_parameter(zFilename, zParam); sqlite3_int64 v; - if( z && sqlite3Atoi64(z, &v, sqlite3Strlen30(z), SQLITE_UTF8)==SQLITE_OK ){ + if( z && sqlite3DecOrHexToI64(z, &v)==SQLITE_OK ){ bDflt = v; } return bDflt; @@ -123433,7 +130074,14 @@ ** connection. */ SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName){ - Btree *pBt = sqlite3DbNameToBtree(db, zDbName); + Btree *pBt; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + pBt = sqlite3DbNameToBtree(db, zDbName); return pBt ? sqlite3BtreeGetFilename(pBt) : 0; } @@ -123442,8 +130090,15 @@ ** no such database exists. */ SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName){ - Btree *pBt = sqlite3DbNameToBtree(db, zDbName); - return pBt ? sqlite3PagerIsreadonly(sqlite3BtreePager(pBt)) : -1; + Btree *pBt; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return -1; + } +#endif + pBt = sqlite3DbNameToBtree(db, zDbName); + return pBt ? sqlite3BtreeIsReadonly(pBt) : -1; } /************** End of main.c ************************************************/ @@ -123632,7 +130287,7 @@ leaveMutex(); assert( !db->mallocFailed ); - sqlite3Error(db, rc, (rc?"database is deadlocked":0)); + sqlite3ErrorWithMsg(db, rc, (rc?"database is deadlocked":0)); sqlite3_mutex_leave(db->mutex); return rc; } @@ -124563,20 +131218,20 @@ sqlite3_tokenizer *pTokenizer; /* tokenizer for inserts and queries */ char *zContentTbl; /* content=xxx option, or NULL */ char *zLanguageid; /* languageid=xxx option, or NULL */ - u8 bAutoincrmerge; /* True if automerge=1 */ + int nAutoincrmerge; /* Value configured by 'automerge' */ u32 nLeafAdd; /* Number of leaf blocks added this trans */ /* Precompiled statements used by the implementation. Each of these ** statements is run and reset within a single virtual table API call. */ - sqlite3_stmt *aStmt[37]; + sqlite3_stmt *aStmt[40]; char *zReadExprlist; char *zWriteExprlist; int nNodeSize; /* Soft limit for node size */ u8 bFts4; /* True for FTS4, false for FTS3 */ - u8 bHasStat; /* True if %_stat table exists */ + u8 bHasStat; /* True if %_stat table exists (2==unknown) */ u8 bHasDocsize; /* True if %_docsize table exists */ u8 bDescIdx; /* True if doclists are in reverse order */ u8 bIgnoreSavepoint; /* True to ignore xSavepoint invocations */ @@ -124938,7 +131593,7 @@ SQLITE_PRIVATE int sqlite3Fts3InitTok(sqlite3*, Fts3Hash *); /* fts3_unicode2.c (functions generated by parsing unicode text files) */ -#ifdef SQLITE_ENABLE_FTS4_UNICODE61 +#ifndef SQLITE_DISABLE_FTS3_UNICODE SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int, int); SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int); SQLITE_PRIVATE int sqlite3FtsUnicodeIsdiacritic(int); @@ -125991,7 +132646,7 @@ p->bHasStat = isFts4; p->bFts4 = isFts4; p->bDescIdx = bDescIdx; - p->bAutoincrmerge = 0xff; /* 0xff means setting unknown */ + p->nAutoincrmerge = 0xff; /* 0xff means setting unknown */ p->zContentTbl = zContent; p->zLanguageid = zLanguageid; zContent = 0; @@ -126034,7 +132689,9 @@ int n = (int)strlen(p->azColumn[iCol]); for(i=0; iazColumn[iCol], zNot, n) ){ + if( zNot && n==(int)strlen(zNot) + && 0==sqlite3_strnicmp(p->azColumn[iCol], zNot, n) + ){ p->abNotindexed[iCol] = 1; sqlite3_free(zNot); azNotindexed[i] = 0; @@ -126068,10 +132725,7 @@ ** addition of a %_stat table so that it can use incremental merge. */ if( !isFts4 && !isCreate ){ - int rc2 = SQLITE_OK; - fts3DbExec(&rc2, db, "SELECT 1 FROM %Q.'%q_stat' WHERE id=2", - p->zDb, p->zName); - if( rc2==SQLITE_OK ) p->bHasStat = 1; + p->bHasStat = 2; } /* Figure out the page-size for the database. This is required in order to @@ -126512,7 +133166,7 @@ sqlite3_int64 *piLeaf, /* Selected leaf node */ sqlite3_int64 *piLeaf2 /* Selected leaf node */ ){ - int rc; /* Return code */ + int rc = SQLITE_OK; /* Return code */ int iHeight; /* Height of this node in tree */ assert( piLeaf || piLeaf2 ); @@ -126523,7 +133177,7 @@ if( rc==SQLITE_OK && iHeight>1 ){ char *zBlob = 0; /* Blob read from %_segments table */ - int nBlob; /* Size of zBlob in bytes */ + int nBlob = 0; /* Size of zBlob in bytes */ if( piLeaf && piLeaf2 && (*piLeaf!=*piLeaf2) ){ rc = sqlite3Fts3ReadBlock(p, *piLeaf, &zBlob, &nBlob, 0); @@ -127745,7 +134399,7 @@ int nVal, /* Number of elements in apVal */ sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ - int rc; + int rc = SQLITE_OK; char *zSql; /* SQL statement used to access %_content */ int eSearch; Fts3Table *p = (Fts3Table *)pCursor->pVtab; @@ -127775,6 +134429,7 @@ /* In case the cursor has been used before, clear it now. */ sqlite3_finalize(pCsr->pStmt); sqlite3_free(pCsr->aDoclist); + sqlite3_free(pCsr->aMatchinfo); sqlite3Fts3ExprFree(pCsr->pExpr); memset(&pCursor[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor)); @@ -127963,23 +134618,53 @@ Fts3Table *p = (Fts3Table*)pVtab; int rc = sqlite3Fts3PendingTermsFlush(p); - if( rc==SQLITE_OK && p->bAutoincrmerge==1 && p->nLeafAdd>(nMinMerge/16) ){ + if( rc==SQLITE_OK + && p->nLeafAdd>(nMinMerge/16) + && p->nAutoincrmerge && p->nAutoincrmerge!=0xff + ){ int mxLevel = 0; /* Maximum relative level value in db */ int A; /* Incr-merge parameter A */ rc = sqlite3Fts3MaxLevel(p, &mxLevel); assert( rc==SQLITE_OK || mxLevel==0 ); A = p->nLeafAdd * mxLevel; A += (A/2); - if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, 8); + if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, p->nAutoincrmerge); } sqlite3Fts3SegmentsClose(p); return rc; } /* -** Implementation of xBegin() method. This is a no-op. +** If it is currently unknown whether or not the FTS table has an %_stat +** table (if p->bHasStat==2), attempt to determine this (set p->bHasStat +** to 0 or 1). Return SQLITE_OK if successful, or an SQLite error code +** if an error occurs. */ +static int fts3SetHasStat(Fts3Table *p){ + int rc = SQLITE_OK; + if( p->bHasStat==2 ){ + const char *zFmt ="SELECT 1 FROM %Q.sqlite_master WHERE tbl_name='%q_stat'"; + char *zSql = sqlite3_mprintf(zFmt, p->zDb, p->zName); + if( zSql ){ + sqlite3_stmt *pStmt = 0; + rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); + if( rc==SQLITE_OK ){ + int bHasStat = (sqlite3_step(pStmt)==SQLITE_ROW); + rc = sqlite3_finalize(pStmt); + if( rc==SQLITE_OK ) p->bHasStat = bHasStat; + } + sqlite3_free(zSql); + }else{ + rc = SQLITE_NOMEM; + } + } + return rc; +} + +/* +** Implementation of xBegin() method. +*/ static int fts3BeginMethod(sqlite3_vtab *pVtab){ Fts3Table *p = (Fts3Table*)pVtab; UNUSED_PARAMETER(pVtab); @@ -127989,7 +134674,7 @@ TESTONLY( p->inTransaction = 1 ); TESTONLY( p->mxSavepoint = -1; ); p->nLeafAdd = 0; - return SQLITE_OK; + return fts3SetHasStat(p); } /* @@ -128238,14 +134923,20 @@ sqlite3 *db = p->db; /* Database connection */ int rc; /* Return Code */ + /* At this point it must be known if the %_stat table exists or not. + ** So bHasStat may not be 2. */ + rc = fts3SetHasStat(p); + /* As it happens, the pending terms table is always empty here. This is ** because an "ALTER TABLE RENAME TABLE" statement inside a transaction ** always opens a savepoint transaction. And the xSavepoint() method ** flushes the pending terms table. But leave the (no-op) call to ** PendingTermsFlush() in in case that changes. */ assert( p->nPendingData==0 ); - rc = sqlite3Fts3PendingTermsFlush(p); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts3PendingTermsFlush(p); + } if( p->zContentTbl==0 ){ fts3DbExec(&rc, db, @@ -128373,7 +135064,7 @@ */ SQLITE_PRIVATE void sqlite3Fts3SimpleTokenizerModule(sqlite3_tokenizer_module const**ppModule); SQLITE_PRIVATE void sqlite3Fts3PorterTokenizerModule(sqlite3_tokenizer_module const**ppModule); -#ifdef SQLITE_ENABLE_FTS4_UNICODE61 +#ifndef SQLITE_DISABLE_FTS3_UNICODE SQLITE_PRIVATE void sqlite3Fts3UnicodeTokenizer(sqlite3_tokenizer_module const**ppModule); #endif #ifdef SQLITE_ENABLE_ICU @@ -128391,7 +135082,7 @@ Fts3Hash *pHash = 0; const sqlite3_tokenizer_module *pSimple = 0; const sqlite3_tokenizer_module *pPorter = 0; -#ifdef SQLITE_ENABLE_FTS4_UNICODE61 +#ifndef SQLITE_DISABLE_FTS3_UNICODE const sqlite3_tokenizer_module *pUnicode = 0; #endif @@ -128400,7 +135091,7 @@ sqlite3Fts3IcuTokenizerModule(&pIcu); #endif -#ifdef SQLITE_ENABLE_FTS4_UNICODE61 +#ifndef SQLITE_DISABLE_FTS3_UNICODE sqlite3Fts3UnicodeTokenizer(&pUnicode); #endif @@ -128428,7 +135119,7 @@ if( sqlite3Fts3HashInsert(pHash, "simple", 7, (void *)pSimple) || sqlite3Fts3HashInsert(pHash, "porter", 7, (void *)pPorter) -#ifdef SQLITE_ENABLE_FTS4_UNICODE61 +#ifndef SQLITE_DISABLE_FTS3_UNICODE || sqlite3Fts3HashInsert(pHash, "unicode61", 10, (void *)pUnicode) #endif #ifdef SQLITE_ENABLE_ICU @@ -129049,7 +135740,7 @@ bMaxSet = 1; } } - assert( rc!=SQLITE_OK || a[p->nToken-1].bIgnore==0 ); + assert( rc!=SQLITE_OK || (p->nToken>=1 && a[p->nToken-1].bIgnore==0) ); assert( rc!=SQLITE_OK || bMaxSet ); /* Keep advancing iterators until they all point to the same document */ @@ -131161,40 +137852,23 @@ int rc; sqlite3_tokenizer_cursor *pCursor; Fts3Expr *pRet = 0; - int nConsumed = 0; + int i = 0; - rc = sqlite3Fts3OpenTokenizer(pTokenizer, pParse->iLangid, z, n, &pCursor); + /* Set variable i to the maximum number of bytes of input to tokenize. */ + for(i=0; iiLangid, z, i, &pCursor); if( rc==SQLITE_OK ){ const char *zToken; int nToken = 0, iStart = 0, iEnd = 0, iPosition = 0; int nByte; /* total space to allocate */ rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition); - - if( (rc==SQLITE_OK || rc==SQLITE_DONE) && sqlite3_fts3_enable_parentheses ){ - int i; - if( rc==SQLITE_DONE ) iStart = n; - for(i=0; inNest++; - rc = fts3ExprParse(pParse, &z[i+1], n-i-1, &pRet, &nConsumed); - if( rc==SQLITE_OK && !pRet ){ - rc = SQLITE_DONE; - } - nConsumed = (int)(i + 1 + nConsumed); - break; - } - - if( z[i]==')' ){ - rc = SQLITE_DONE; - pParse->nNest--; - nConsumed = i+1; - break; - } - } - } - - if( nConsumed==0 && rc==SQLITE_OK ){ + if( rc==SQLITE_OK ){ nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken; pRet = (Fts3Expr *)fts3MallocZero(nByte); if( !pRet ){ @@ -131228,13 +137902,14 @@ } } - nConsumed = iEnd; + *pnConsumed = iEnd; + }else if( i && rc==SQLITE_DONE ){ + rc = SQLITE_OK; } pModule->xClose(pCursor); } - *pnConsumed = nConsumed; *ppExpr = pRet; return rc; } @@ -131484,6 +138159,21 @@ return getNextString(pParse, &zInput[1], ii-1, ppExpr); } + if( sqlite3_fts3_enable_parentheses ){ + if( *zInput=='(' ){ + int nConsumed = 0; + pParse->nNest++; + rc = fts3ExprParse(pParse, zInput+1, nInput-1, ppExpr, &nConsumed); + if( rc==SQLITE_OK && !*ppExpr ){ rc = SQLITE_DONE; } + *pnConsumed = (int)(zInput - z) + 1 + nConsumed; + return rc; + }else if( *zInput==')' ){ + pParse->nNest--; + *pnConsumed = (int)((zInput - z) + 1); + *ppExpr = 0; + return SQLITE_DONE; + } + } /* If control flows to this point, this must be a regular token, or ** the end of the input. Read a regular token using the sqlite3_tokenizer @@ -131602,96 +138292,100 @@ while( rc==SQLITE_OK ){ Fts3Expr *p = 0; int nByte = 0; + rc = getNextNode(pParse, zIn, nIn, &p, &nByte); + assert( nByte>0 || (rc!=SQLITE_OK && p==0) ); if( rc==SQLITE_OK ){ - int isPhrase; + if( p ){ + int isPhrase; - if( !sqlite3_fts3_enable_parentheses - && p->eType==FTSQUERY_PHRASE && pParse->isNot - ){ - /* Create an implicit NOT operator. */ - Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr)); - if( !pNot ){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_NOMEM; - goto exprparse_out; - } - pNot->eType = FTSQUERY_NOT; - pNot->pRight = p; - p->pParent = pNot; - if( pNotBranch ){ - pNot->pLeft = pNotBranch; - pNotBranch->pParent = pNot; - } - pNotBranch = pNot; - p = pPrev; - }else{ - int eType = p->eType; - isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft); - - /* The isRequirePhrase variable is set to true if a phrase or - ** an expression contained in parenthesis is required. If a - ** binary operator (AND, OR, NOT or NEAR) is encounted when - ** isRequirePhrase is set, this is a syntax error. - */ - if( !isPhrase && isRequirePhrase ){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_ERROR; - goto exprparse_out; - } - - if( isPhrase && !isRequirePhrase ){ - /* Insert an implicit AND operator. */ - Fts3Expr *pAnd; - assert( pRet && pPrev ); - pAnd = fts3MallocZero(sizeof(Fts3Expr)); - if( !pAnd ){ + if( !sqlite3_fts3_enable_parentheses + && p->eType==FTSQUERY_PHRASE && pParse->isNot + ){ + /* Create an implicit NOT operator. */ + Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr)); + if( !pNot ){ sqlite3Fts3ExprFree(p); rc = SQLITE_NOMEM; goto exprparse_out; } - pAnd->eType = FTSQUERY_AND; - insertBinaryOperator(&pRet, pPrev, pAnd); - pPrev = pAnd; - } + pNot->eType = FTSQUERY_NOT; + pNot->pRight = p; + p->pParent = pNot; + if( pNotBranch ){ + pNot->pLeft = pNotBranch; + pNotBranch->pParent = pNot; + } + pNotBranch = pNot; + p = pPrev; + }else{ + int eType = p->eType; + isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft); - /* This test catches attempts to make either operand of a NEAR - ** operator something other than a phrase. For example, either of - ** the following: - ** - ** (bracketed expression) NEAR phrase - ** phrase NEAR (bracketed expression) - ** - ** Return an error in either case. - */ - if( pPrev && ( + /* The isRequirePhrase variable is set to true if a phrase or + ** an expression contained in parenthesis is required. If a + ** binary operator (AND, OR, NOT or NEAR) is encounted when + ** isRequirePhrase is set, this is a syntax error. + */ + if( !isPhrase && isRequirePhrase ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_ERROR; + goto exprparse_out; + } + + if( isPhrase && !isRequirePhrase ){ + /* Insert an implicit AND operator. */ + Fts3Expr *pAnd; + assert( pRet && pPrev ); + pAnd = fts3MallocZero(sizeof(Fts3Expr)); + if( !pAnd ){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_NOMEM; + goto exprparse_out; + } + pAnd->eType = FTSQUERY_AND; + insertBinaryOperator(&pRet, pPrev, pAnd); + pPrev = pAnd; + } + + /* This test catches attempts to make either operand of a NEAR + ** operator something other than a phrase. For example, either of + ** the following: + ** + ** (bracketed expression) NEAR phrase + ** phrase NEAR (bracketed expression) + ** + ** Return an error in either case. + */ + if( pPrev && ( (eType==FTSQUERY_NEAR && !isPhrase && pPrev->eType!=FTSQUERY_PHRASE) || (eType!=FTSQUERY_PHRASE && isPhrase && pPrev->eType==FTSQUERY_NEAR) - )){ - sqlite3Fts3ExprFree(p); - rc = SQLITE_ERROR; - goto exprparse_out; - } - - if( isPhrase ){ - if( pRet ){ - assert( pPrev && pPrev->pLeft && pPrev->pRight==0 ); - pPrev->pRight = p; - p->pParent = pPrev; + )){ + sqlite3Fts3ExprFree(p); + rc = SQLITE_ERROR; + goto exprparse_out; + } + + if( isPhrase ){ + if( pRet ){ + assert( pPrev && pPrev->pLeft && pPrev->pRight==0 ); + pPrev->pRight = p; + p->pParent = pPrev; + }else{ + pRet = p; + } }else{ - pRet = p; + insertBinaryOperator(&pRet, pPrev, p); } - }else{ - insertBinaryOperator(&pRet, pPrev, p); + isRequirePhrase = !isPhrase; } - isRequirePhrase = !isPhrase; + pPrev = p; } assert( nByte>0 ); } assert( rc!=SQLITE_OK || (nByte>0 && nByte<=nIn) ); nIn -= nByte; zIn += nByte; - pPrev = p; } if( rc==SQLITE_DONE && pRet && isRequirePhrase ){ @@ -132824,7 +139518,7 @@ ** by a consonant. ** ** In this routine z[] is in reverse order. So we are really looking -** for an instance of of a consonant followed by a vowel. +** for an instance of a consonant followed by a vowel. */ static int m_gt_0(const char *z){ while( isVowel(z) ){ z++; } @@ -134193,7 +140887,7 @@ sqlite3_vtab **ppVtab, /* OUT: New sqlite3_vtab object */ char **pzErr /* OUT: sqlite3_malloc'd error message */ ){ - Fts3tokTable *pTab; + Fts3tokTable *pTab = 0; const sqlite3_tokenizer_module *pMod = 0; sqlite3_tokenizer *pTok = 0; int rc; @@ -134679,6 +141373,7 @@ int nSize; /* Size of allocation at aData */ int nData; /* Bytes of data in aData */ char *aData; /* Pointer to block from malloc() */ + i64 nLeafData; /* Number of bytes of leaf data written */ }; /* @@ -134754,6 +141449,10 @@ #define SQL_SELECT_INDEXES 35 #define SQL_SELECT_MXLEVEL 36 +#define SQL_SELECT_LEVEL_RANGE2 37 +#define SQL_UPDATE_LEVEL_IDX 38 +#define SQL_UPDATE_LEVEL 39 + /* ** This function is used to obtain an SQLite prepared statement handle ** for the statement identified by the second argument. If successful, @@ -134855,7 +141554,18 @@ /* SQL_SELECT_MXLEVEL ** Return the largest relative level in the FTS index or indexes. */ -/* 36 */ "SELECT max( level %% 1024 ) FROM %Q.'%q_segdir'" +/* 36 */ "SELECT max( level %% 1024 ) FROM %Q.'%q_segdir'", + + /* Return segments in order from oldest to newest.*/ +/* 37 */ "SELECT level, idx, end_block " + "FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? " + "ORDER BY level DESC, idx ASC", + + /* Update statements used while promoting segments */ +/* 38 */ "UPDATE OR FAIL %Q.'%q_segdir' SET level=-1,idx=? " + "WHERE level=? AND idx=?", +/* 39 */ "UPDATE OR FAIL %Q.'%q_segdir' SET level=? WHERE level=-1" + }; int rc = SQLITE_OK; sqlite3_stmt *pStmt; @@ -136396,6 +143106,7 @@ sqlite3_int64 iStartBlock, /* Value for "start_block" field */ sqlite3_int64 iLeafEndBlock, /* Value for "leaves_end_block" field */ sqlite3_int64 iEndBlock, /* Value for "end_block" field */ + sqlite3_int64 nLeafData, /* Bytes of leaf data in segment */ char *zRoot, /* Blob value for "root" field */ int nRoot /* Number of bytes in buffer zRoot */ ){ @@ -136406,7 +143117,13 @@ sqlite3_bind_int(pStmt, 2, iIdx); sqlite3_bind_int64(pStmt, 3, iStartBlock); sqlite3_bind_int64(pStmt, 4, iLeafEndBlock); - sqlite3_bind_int64(pStmt, 5, iEndBlock); + if( nLeafData==0 ){ + sqlite3_bind_int64(pStmt, 5, iEndBlock); + }else{ + char *zEnd = sqlite3_mprintf("%lld %lld", iEndBlock, nLeafData); + if( !zEnd ) return SQLITE_NOMEM; + sqlite3_bind_text(pStmt, 5, zEnd, -1, sqlite3_free); + } sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); @@ -136732,6 +143449,9 @@ nDoclist; /* Doclist data */ } + /* Increase the total number of bytes written to account for the new entry. */ + pWriter->nLeafData += nReq; + /* If the buffer currently allocated is too small for this entry, realloc ** the buffer to make it large enough. */ @@ -136803,13 +143523,13 @@ pWriter->iFirst, pWriter->iFree, &iLast, &zRoot, &nRoot); } if( rc==SQLITE_OK ){ - rc = fts3WriteSegdir( - p, iLevel, iIdx, pWriter->iFirst, iLastLeaf, iLast, zRoot, nRoot); + rc = fts3WriteSegdir(p, iLevel, iIdx, + pWriter->iFirst, iLastLeaf, iLast, pWriter->nLeafData, zRoot, nRoot); } }else{ /* The entire tree fits on the root node. Write it to the segdir table. */ - rc = fts3WriteSegdir( - p, iLevel, iIdx, 0, 0, 0, pWriter->aData, pWriter->nData); + rc = fts3WriteSegdir(p, iLevel, iIdx, + 0, 0, 0, pWriter->nLeafData, pWriter->aData, pWriter->nData); } p->nLeafAdd++; return rc; @@ -136894,6 +143614,37 @@ } /* +** iAbsLevel is an absolute level that may be assumed to exist within +** the database. This function checks if it is the largest level number +** within its index. Assuming no error occurs, *pbMax is set to 1 if +** iAbsLevel is indeed the largest level, or 0 otherwise, and SQLITE_OK +** is returned. If an error occurs, an error code is returned and the +** final value of *pbMax is undefined. +*/ +static int fts3SegmentIsMaxLevel(Fts3Table *p, i64 iAbsLevel, int *pbMax){ + + /* Set pStmt to the compiled version of: + ** + ** SELECT max(level) FROM %Q.'%q_segdir' WHERE level BETWEEN ? AND ? + ** + ** (1024 is actually the value of macro FTS3_SEGDIR_PREFIXLEVEL_STR). + */ + sqlite3_stmt *pStmt; + int rc = fts3SqlStmt(p, SQL_SELECT_SEGDIR_MAX_LEVEL, &pStmt, 0); + if( rc!=SQLITE_OK ) return rc; + sqlite3_bind_int64(pStmt, 1, iAbsLevel+1); + sqlite3_bind_int64(pStmt, 2, + ((iAbsLevel/FTS3_SEGDIR_MAXLEVEL)+1) * FTS3_SEGDIR_MAXLEVEL + ); + + *pbMax = 0; + if( SQLITE_ROW==sqlite3_step(pStmt) ){ + *pbMax = sqlite3_column_type(pStmt, 0)==SQLITE_NULL; + } + return sqlite3_reset(pStmt); +} + +/* ** Delete all entries in the %_segments table associated with the segment ** opened with seg-reader pSeg. This function does not affect the contents ** of the %_segdir table. @@ -137429,6 +144180,140 @@ } /* +** Decode the "end_block" field, selected by column iCol of the SELECT +** statement passed as the first argument. +** +** The "end_block" field may contain either an integer, or a text field +** containing the text representation of two non-negative integers separated +** by one or more space (0x20) characters. In the first case, set *piEndBlock +** to the integer value and *pnByte to zero before returning. In the second, +** set *piEndBlock to the first value and *pnByte to the second. +*/ +static void fts3ReadEndBlockField( + sqlite3_stmt *pStmt, + int iCol, + i64 *piEndBlock, + i64 *pnByte +){ + const unsigned char *zText = sqlite3_column_text(pStmt, iCol); + if( zText ){ + int i; + int iMul = 1; + i64 iVal = 0; + for(i=0; zText[i]>='0' && zText[i]<='9'; i++){ + iVal = iVal*10 + (zText[i] - '0'); + } + *piEndBlock = iVal; + while( zText[i]==' ' ) i++; + iVal = 0; + if( zText[i]=='-' ){ + i++; + iMul = -1; + } + for(/* no-op */; zText[i]>='0' && zText[i]<='9'; i++){ + iVal = iVal*10 + (zText[i] - '0'); + } + *pnByte = (iVal * (i64)iMul); + } +} + + +/* +** A segment of size nByte bytes has just been written to absolute level +** iAbsLevel. Promote any segments that should be promoted as a result. +*/ +static int fts3PromoteSegments( + Fts3Table *p, /* FTS table handle */ + sqlite3_int64 iAbsLevel, /* Absolute level just updated */ + sqlite3_int64 nByte /* Size of new segment at iAbsLevel */ +){ + int rc = SQLITE_OK; + sqlite3_stmt *pRange; + + rc = fts3SqlStmt(p, SQL_SELECT_LEVEL_RANGE2, &pRange, 0); + + if( rc==SQLITE_OK ){ + int bOk = 0; + i64 iLast = (iAbsLevel/FTS3_SEGDIR_MAXLEVEL + 1) * FTS3_SEGDIR_MAXLEVEL - 1; + i64 nLimit = (nByte*3)/2; + + /* Loop through all entries in the %_segdir table corresponding to + ** segments in this index on levels greater than iAbsLevel. If there is + ** at least one such segment, and it is possible to determine that all + ** such segments are smaller than nLimit bytes in size, they will be + ** promoted to level iAbsLevel. */ + sqlite3_bind_int64(pRange, 1, iAbsLevel+1); + sqlite3_bind_int64(pRange, 2, iLast); + while( SQLITE_ROW==sqlite3_step(pRange) ){ + i64 nSize = 0, dummy; + fts3ReadEndBlockField(pRange, 2, &dummy, &nSize); + if( nSize<=0 || nSize>nLimit ){ + /* If nSize==0, then the %_segdir.end_block field does not not + ** contain a size value. This happens if it was written by an + ** old version of FTS. In this case it is not possible to determine + ** the size of the segment, and so segment promotion does not + ** take place. */ + bOk = 0; + break; + } + bOk = 1; + } + rc = sqlite3_reset(pRange); + + if( bOk ){ + int iIdx = 0; + sqlite3_stmt *pUpdate1 = 0; + sqlite3_stmt *pUpdate2 = 0; + + if( rc==SQLITE_OK ){ + rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL_IDX, &pUpdate1, 0); + } + if( rc==SQLITE_OK ){ + rc = fts3SqlStmt(p, SQL_UPDATE_LEVEL, &pUpdate2, 0); + } + + if( rc==SQLITE_OK ){ + + /* Loop through all %_segdir entries for segments in this index with + ** levels equal to or greater than iAbsLevel. As each entry is visited, + ** updated it to set (level = -1) and (idx = N), where N is 0 for the + ** oldest segment in the range, 1 for the next oldest, and so on. + ** + ** In other words, move all segments being promoted to level -1, + ** setting the "idx" fields as appropriate to keep them in the same + ** order. The contents of level -1 (which is never used, except + ** transiently here), will be moved back to level iAbsLevel below. */ + sqlite3_bind_int64(pRange, 1, iAbsLevel); + while( SQLITE_ROW==sqlite3_step(pRange) ){ + sqlite3_bind_int(pUpdate1, 1, iIdx++); + sqlite3_bind_int(pUpdate1, 2, sqlite3_column_int(pRange, 0)); + sqlite3_bind_int(pUpdate1, 3, sqlite3_column_int(pRange, 1)); + sqlite3_step(pUpdate1); + rc = sqlite3_reset(pUpdate1); + if( rc!=SQLITE_OK ){ + sqlite3_reset(pRange); + break; + } + } + } + if( rc==SQLITE_OK ){ + rc = sqlite3_reset(pRange); + } + + /* Move level -1 to level iAbsLevel */ + if( rc==SQLITE_OK ){ + sqlite3_bind_int64(pUpdate2, 1, iAbsLevel); + sqlite3_step(pUpdate2); + rc = sqlite3_reset(pUpdate2); + } + } + } + + + return rc; +} + +/* ** Merge all level iLevel segments in the database into a single ** iLevel+1 segment. Or, if iLevel<0, merge all segments into a ** single segment with a level equal to the numerically largest level @@ -137452,6 +144337,7 @@ Fts3SegFilter filter; /* Segment term filter condition */ Fts3MultiSegReader csr; /* Cursor to iterate through level(s) */ int bIgnoreEmpty = 0; /* True to ignore empty segments */ + i64 iMaxLevel = 0; /* Max level number for this index/langid */ assert( iLevel==FTS3_SEGCURSOR_ALL || iLevel==FTS3_SEGCURSOR_PENDING @@ -137463,6 +144349,11 @@ rc = sqlite3Fts3SegReaderCursor(p, iLangid, iIndex, iLevel, 0, 0, 1, 0, &csr); if( rc!=SQLITE_OK || csr.nSegment==0 ) goto finished; + if( iLevel!=FTS3_SEGCURSOR_PENDING ){ + rc = fts3SegmentMaxLevel(p, iLangid, iIndex, &iMaxLevel); + if( rc!=SQLITE_OK ) goto finished; + } + if( iLevel==FTS3_SEGCURSOR_ALL ){ /* This call is to merge all segments in the database to a single ** segment. The level of the new segment is equal to the numerically @@ -137472,21 +144363,21 @@ rc = SQLITE_DONE; goto finished; } - rc = fts3SegmentMaxLevel(p, iLangid, iIndex, &iNewLevel); + iNewLevel = iMaxLevel; bIgnoreEmpty = 1; - }else if( iLevel==FTS3_SEGCURSOR_PENDING ){ - iNewLevel = getAbsoluteLevel(p, iLangid, iIndex, 0); - rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, 0, &iIdx); }else{ /* This call is to merge all segments at level iLevel. find the next ** available segment index at level iLevel+1. The call to ** fts3AllocateSegdirIdx() will merge the segments at level iLevel+1 to ** a single iLevel+2 segment if necessary. */ - rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, iLevel+1, &iIdx); + assert( FTS3_SEGCURSOR_PENDING==-1 ); iNewLevel = getAbsoluteLevel(p, iLangid, iIndex, iLevel+1); + rc = fts3AllocateSegdirIdx(p, iLangid, iIndex, iLevel+1, &iIdx); + bIgnoreEmpty = (iLevel!=FTS3_SEGCURSOR_PENDING) && (iNewLevel>iMaxLevel); } if( rc!=SQLITE_OK ) goto finished; + assert( csr.nSegment>0 ); assert( iNewLevel>=getAbsoluteLevel(p, iLangid, iIndex, 0) ); assert( iNewLevelnLeafData); + } + } + } finished: fts3SegWriterFree(pWriter); @@ -137521,7 +144419,7 @@ /* -** Flush the contents of pendingTerms to level 0 segments. +** Flush the contents of pendingTerms to level 0 segments. */ SQLITE_PRIVATE int sqlite3Fts3PendingTermsFlush(Fts3Table *p){ int rc = SQLITE_OK; @@ -137537,14 +144435,19 @@ ** estimate the number of leaf blocks of content to be written */ if( rc==SQLITE_OK && p->bHasStat - && p->bAutoincrmerge==0xff && p->nLeafAdd>0 + && p->nAutoincrmerge==0xff && p->nLeafAdd>0 ){ sqlite3_stmt *pStmt = 0; rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pStmt, 0); if( rc==SQLITE_OK ){ sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE); rc = sqlite3_step(pStmt); - p->bAutoincrmerge = (rc==SQLITE_ROW && sqlite3_column_int(pStmt, 0)); + if( rc==SQLITE_ROW ){ + p->nAutoincrmerge = sqlite3_column_int(pStmt, 0); + if( p->nAutoincrmerge==1 ) p->nAutoincrmerge = 8; + }else if( rc==SQLITE_DONE ){ + p->nAutoincrmerge = 0; + } rc = sqlite3_reset(pStmt); } } @@ -137912,6 +144815,8 @@ int iIdx; /* Index of *output* segment in iAbsLevel+1 */ sqlite3_int64 iStart; /* Block number of first allocated block */ sqlite3_int64 iEnd; /* Block number of last allocated block */ + sqlite3_int64 nLeafData; /* Bytes of leaf page data so far */ + u8 bNoLeafData; /* If true, store 0 for segment size */ NodeWriter aNodeWriter[FTS_MAX_APPENDABLE_HEIGHT]; }; @@ -138250,8 +145155,8 @@ nSpace += sqlite3Fts3VarintLen(nDoclist) + nDoclist; } + pWriter->nLeafData += nSpace; blobGrowBuffer(&pLeaf->block, pLeaf->block.n + nSpace, &rc); - if( rc==SQLITE_OK ){ if( pLeaf->block.n==0 ){ pLeaf->block.n = 1; @@ -138350,6 +145255,7 @@ pWriter->iStart, /* start_block */ pWriter->aNodeWriter[0].iBlock, /* leaves_end_block */ pWriter->iEnd, /* end_block */ + (pWriter->bNoLeafData==0 ? pWriter->nLeafData : 0), /* end_block */ pRoot->block.a, pRoot->block.n /* root */ ); } @@ -138451,7 +145357,11 @@ if( sqlite3_step(pSelect)==SQLITE_ROW ){ iStart = sqlite3_column_int64(pSelect, 1); iLeafEnd = sqlite3_column_int64(pSelect, 2); - iEnd = sqlite3_column_int64(pSelect, 3); + fts3ReadEndBlockField(pSelect, 3, &iEnd, &pWriter->nLeafData); + if( pWriter->nLeafData<0 ){ + pWriter->nLeafData = pWriter->nLeafData * -1; + } + pWriter->bNoLeafData = (pWriter->nLeafData==0); nRoot = sqlite3_column_bytes(pSelect, 4); aRoot = sqlite3_column_blob(pSelect, 4); }else{ @@ -139052,11 +145962,11 @@ /* ** Attempt an incremental merge that writes nMerge leaf blocks. ** -** Incremental merges happen nMin segments at a time. The two -** segments to be merged are the nMin oldest segments (the ones with -** the smallest indexes) in the highest level that contains at least -** nMin segments. Multiple merges might occur in an attempt to write the -** quota of nMerge leaf blocks. +** Incremental merges happen nMin segments at a time. The segments +** to be merged are the nMin oldest segments (the ones with the smallest +** values for the _segdir.idx field) in the highest level that contains +** at least nMin segments. Multiple merges might occur in an attempt to +** write the quota of nMerge leaf blocks. */ SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){ int rc; /* Return code */ @@ -139081,6 +145991,7 @@ const i64 nMod = FTS3_SEGDIR_MAXLEVEL * p->nIndex; sqlite3_stmt *pFindLevel = 0; /* SQL used to determine iAbsLevel */ int bUseHint = 0; /* True if attempting to append */ + int iIdx = 0; /* Largest idx in level (iAbsLevel+1) */ /* Search the %_segdir table for the absolute level with the smallest ** relative level number that contains at least nMin segments, if any. @@ -139134,23 +146045,32 @@ ** to start work on some other level. */ memset(pWriter, 0, nAlloc); pFilter->flags = FTS3_SEGMENT_REQUIRE_POS; + if( rc==SQLITE_OK ){ + rc = fts3IncrmergeOutputIdx(p, iAbsLevel, &iIdx); + assert( bUseHint==1 || bUseHint==0 ); + if( iIdx==0 || (bUseHint && iIdx==1) ){ + int bIgnore = 0; + rc = fts3SegmentIsMaxLevel(p, iAbsLevel+1, &bIgnore); + if( bIgnore ){ + pFilter->flags |= FTS3_SEGMENT_IGNORE_EMPTY; + } + } + } + + if( rc==SQLITE_OK ){ rc = fts3IncrmergeCsr(p, iAbsLevel, nSeg, pCsr); } if( SQLITE_OK==rc && pCsr->nSegment==nSeg && SQLITE_OK==(rc = sqlite3Fts3SegReaderStart(p, pCsr, pFilter)) && SQLITE_ROW==(rc = sqlite3Fts3SegReaderStep(p, pCsr)) ){ - int iIdx = 0; /* Largest idx in level (iAbsLevel+1) */ - rc = fts3IncrmergeOutputIdx(p, iAbsLevel, &iIdx); - if( rc==SQLITE_OK ){ - if( bUseHint && iIdx>0 ){ - const char *zKey = pCsr->zTerm; - int nKey = pCsr->nTerm; - rc = fts3IncrmergeLoad(p, iAbsLevel, iIdx-1, zKey, nKey, pWriter); - }else{ - rc = fts3IncrmergeWriter(p, iAbsLevel, iIdx, pCsr, pWriter); - } + if( bUseHint && iIdx>0 ){ + const char *zKey = pCsr->zTerm; + int nKey = pCsr->nTerm; + rc = fts3IncrmergeLoad(p, iAbsLevel, iIdx-1, zKey, nKey, pWriter); + }else{ + rc = fts3IncrmergeWriter(p, iAbsLevel, iIdx, pCsr, pWriter); } if( rc==SQLITE_OK && pWriter->nLeafEst ){ @@ -139172,7 +146092,13 @@ } } + if( nSeg!=0 ){ + pWriter->nLeafData = pWriter->nLeafData * -1; + } fts3IncrmergeRelease(p, pWriter, &rc); + if( nSeg==0 && pWriter->bNoLeafData==0 ){ + fts3PromoteSegments(p, iAbsLevel+1, pWriter->nLeafData); + } } sqlite3Fts3SegReaderFinish(pCsr); @@ -139259,7 +146185,10 @@ ){ int rc = SQLITE_OK; sqlite3_stmt *pStmt = 0; - p->bAutoincrmerge = fts3Getint(&zParam)!=0; + p->nAutoincrmerge = fts3Getint(&zParam); + if( p->nAutoincrmerge==1 || p->nAutoincrmerge>FTS3_MERGE_COUNT ){ + p->nAutoincrmerge = 8; + } if( !p->bHasStat ){ assert( p->bFts4==0 ); sqlite3Fts3CreateStatTable(&rc, p); @@ -139268,7 +146197,7 @@ rc = fts3SqlStmt(p, SQL_REPLACE_STAT, &pStmt, 0); if( rc ) return rc; sqlite3_bind_int(pStmt, 1, FTS_STAT_AUTOINCRMERGE); - sqlite3_bind_int(pStmt, 2, p->bAutoincrmerge); + sqlite3_bind_int(pStmt, 2, p->nAutoincrmerge); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); return rc; @@ -139425,34 +146354,36 @@ int iCol; for(iCol=0; rc==SQLITE_OK && iColnColumn; iCol++){ - const char *zText = (const char *)sqlite3_column_text(pStmt, iCol+1); - int nText = sqlite3_column_bytes(pStmt, iCol+1); - sqlite3_tokenizer_cursor *pT = 0; + if( p->abNotindexed[iCol]==0 ){ + const char *zText = (const char *)sqlite3_column_text(pStmt, iCol+1); + int nText = sqlite3_column_bytes(pStmt, iCol+1); + sqlite3_tokenizer_cursor *pT = 0; - rc = sqlite3Fts3OpenTokenizer(p->pTokenizer, iLang, zText, nText, &pT); - while( rc==SQLITE_OK ){ - char const *zToken; /* Buffer containing token */ - int nToken = 0; /* Number of bytes in token */ - int iDum1 = 0, iDum2 = 0; /* Dummy variables */ - int iPos = 0; /* Position of token in zText */ + rc = sqlite3Fts3OpenTokenizer(p->pTokenizer, iLang, zText, nText,&pT); + while( rc==SQLITE_OK ){ + char const *zToken; /* Buffer containing token */ + int nToken = 0; /* Number of bytes in token */ + int iDum1 = 0, iDum2 = 0; /* Dummy variables */ + int iPos = 0; /* Position of token in zText */ - rc = pModule->xNext(pT, &zToken, &nToken, &iDum1, &iDum2, &iPos); - if( rc==SQLITE_OK ){ - int i; - cksum2 = cksum2 ^ fts3ChecksumEntry( - zToken, nToken, iLang, 0, iDocid, iCol, iPos - ); - for(i=1; inIndex; i++){ - if( p->aIndex[i].nPrefix<=nToken ){ - cksum2 = cksum2 ^ fts3ChecksumEntry( - zToken, p->aIndex[i].nPrefix, iLang, i, iDocid, iCol, iPos - ); + rc = pModule->xNext(pT, &zToken, &nToken, &iDum1, &iDum2, &iPos); + if( rc==SQLITE_OK ){ + int i; + cksum2 = cksum2 ^ fts3ChecksumEntry( + zToken, nToken, iLang, 0, iDocid, iCol, iPos + ); + for(i=1; inIndex; i++){ + if( p->aIndex[i].nPrefix<=nToken ){ + cksum2 = cksum2 ^ fts3ChecksumEntry( + zToken, p->aIndex[i].nPrefix, iLang, i, iDocid, iCol, iPos + ); + } } } } + if( pT ) pModule->xClose(pT); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; } - if( pT ) pModule->xClose(pT); - if( rc==SQLITE_DONE ) rc = SQLITE_OK; } } @@ -139757,6 +146688,10 @@ int nChng = 0; /* Net change in number of documents */ int bInsertDone = 0; + /* At this point it must be known if the %_stat table exists or not. + ** So bHasStat may not be 2. */ + assert( p->bHasStat==0 || p->bHasStat==1 ); + assert( p->pSegments==0 ); assert( nArg==1 /* DELETE operations */ @@ -141444,7 +148379,7 @@ ** Implementation of the "unicode" full-text-search tokenizer. */ -#ifdef SQLITE_ENABLE_FTS4_UNICODE61 +#ifndef SQLITE_DISABLE_FTS3_UNICODE #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) @@ -141660,7 +148595,7 @@ for(i=0; rc==SQLITE_OK && ibRemoveDiacritic = 1; @@ -141747,7 +148682,7 @@ ){ unicode_cursor *pCsr = (unicode_cursor *)pC; unicode_tokenizer *p = ((unicode_tokenizer *)pCsr->base.pTokenizer); - int iCode; + int iCode = 0; char *zOut; const unsigned char *z = &pCsr->aInput[pCsr->iOff]; const unsigned char *zStart = z; @@ -141792,11 +148727,11 @@ ); /* Set the output variables and return. */ - pCsr->iOff = (z - pCsr->aInput); + pCsr->iOff = (int)(z - pCsr->aInput); *paToken = pCsr->zToken; - *pnToken = zOut - pCsr->zToken; - *piStart = (zStart - pCsr->aInput); - *piEnd = (zEnd - pCsr->aInput); + *pnToken = (int)(zOut - pCsr->zToken); + *piStart = (int)(zStart - pCsr->aInput); + *piEnd = (int)(zEnd - pCsr->aInput); *piPos = pCsr->iToken++; return SQLITE_OK; } @@ -141819,7 +148754,7 @@ } #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */ -#endif /* ifndef SQLITE_ENABLE_FTS4_UNICODE61 */ +#endif /* ifndef SQLITE_DISABLE_FTS3_UNICODE */ /************** End of fts3_unicode.c ****************************************/ /************** Begin file fts3_unicode2.c ***********************************/ @@ -141840,7 +148775,7 @@ ** DO NOT EDIT THIS MACHINE GENERATED FILE. */ -#if defined(SQLITE_ENABLE_FTS4_UNICODE61) +#ifndef SQLITE_DISABLE_FTS3_UNICODE #if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) /* #include */ @@ -141864,7 +148799,7 @@ ** C. It is not possible to represent a range larger than 1023 codepoints ** using this format. */ - const static unsigned int aEntry[] = { + static const unsigned int aEntry[] = { 0x00000030, 0x0000E807, 0x00016C06, 0x0001EC2F, 0x0002AC07, 0x0002D001, 0x0002D803, 0x0002EC01, 0x0002FC01, 0x00035C01, 0x0003DC01, 0x000B0804, 0x000B480E, 0x000B9407, 0x000BB401, @@ -141956,7 +148891,7 @@ return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 ); }else if( c<(1<<22) ){ unsigned int key = (((unsigned int)c)<<10) | 0x000003FF; - int iRes; + int iRes = 0; int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1; int iLo = 0; while( iHi>=iLo ){ @@ -142027,7 +148962,7 @@ } assert( key>=aDia[iRes] ); return ((c > (aDia[iRes]>>3) + (aDia[iRes]&0x07)) ? c : (int)aChar[iRes]); -}; +} /* @@ -142187,7 +149122,7 @@ return ret; } #endif /* defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) */ -#endif /* !defined(SQLITE_ENABLE_FTS4_UNICODE61) */ +#endif /* !defined(SQLITE_DISABLE_FTS3_UNICODE) */ /************** End of fts3_unicode2.c ***************************************/ /************** Begin file rtree.c *******************************************/ @@ -142247,60 +149182,20 @@ #if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_RTREE) -/* -** This file contains an implementation of a couple of different variants -** of the r-tree algorithm. See the README file for further details. The -** same data-structure is used for all, but the algorithms for insert and -** delete operations vary. The variants used are selected at compile time -** by defining the following symbols: -*/ - -/* Either, both or none of the following may be set to activate -** r*tree variant algorithms. -*/ -#define VARIANT_RSTARTREE_CHOOSESUBTREE 0 -#define VARIANT_RSTARTREE_REINSERT 1 - -/* -** Exactly one of the following must be set to 1. -*/ -#define VARIANT_GUTTMAN_QUADRATIC_SPLIT 0 -#define VARIANT_GUTTMAN_LINEAR_SPLIT 0 -#define VARIANT_RSTARTREE_SPLIT 1 - -#define VARIANT_GUTTMAN_SPLIT \ - (VARIANT_GUTTMAN_LINEAR_SPLIT||VARIANT_GUTTMAN_QUADRATIC_SPLIT) - -#if VARIANT_GUTTMAN_QUADRATIC_SPLIT - #define PickNext QuadraticPickNext - #define PickSeeds QuadraticPickSeeds - #define AssignCells splitNodeGuttman -#endif -#if VARIANT_GUTTMAN_LINEAR_SPLIT - #define PickNext LinearPickNext - #define PickSeeds LinearPickSeeds - #define AssignCells splitNodeGuttman -#endif -#if VARIANT_RSTARTREE_SPLIT - #define AssignCells splitNodeStartree -#endif - -#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) -# define NDEBUG 1 -#endif - #ifndef SQLITE_CORE SQLITE_EXTENSION_INIT1 #else #endif /* #include */ /* #include */ +/* #include */ #ifndef SQLITE_AMALGAMATION #include "sqlite3rtree.h" typedef sqlite3_int64 i64; typedef unsigned char u8; +typedef unsigned short u16; typedef unsigned int u32; #endif @@ -142318,6 +149213,7 @@ typedef struct RtreeMatchArg RtreeMatchArg; typedef struct RtreeGeomCallback RtreeGeomCallback; typedef union RtreeCoord RtreeCoord; +typedef struct RtreeSearchPoint RtreeSearchPoint; /* The rtree may have between 1 and RTREE_MAX_DIMENSIONS dimensions. */ #define RTREE_MAX_DIMENSIONS 5 @@ -142326,7 +149222,7 @@ ** ever contain very many entries, so a fixed number of buckets is ** used. */ -#define HASHSIZE 128 +#define HASHSIZE 97 /* The xBestIndex method of this virtual table requires an estimate of ** the number of rows in the virtual table to calculate the costs of @@ -142342,15 +149238,15 @@ ** An rtree virtual-table object. */ struct Rtree { - sqlite3_vtab base; + sqlite3_vtab base; /* Base class. Must be first */ sqlite3 *db; /* Host database connection */ int iNodeSize; /* Size in bytes of each node in the node table */ - int nDim; /* Number of dimensions */ - int nBytesPerCell; /* Bytes consumed per cell */ + u8 nDim; /* Number of dimensions */ + u8 eCoordType; /* RTREE_COORD_REAL32 or RTREE_COORD_INT32 */ + u8 nBytesPerCell; /* Bytes consumed per cell */ int iDepth; /* Current depth of the r-tree structure */ char *zDb; /* Name of database containing r-tree table */ char *zName; /* Name of r-tree table */ - RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ int nBusy; /* Current number of users of this structure */ i64 nRowEst; /* Estimated number of rows in this table */ @@ -142377,10 +149273,10 @@ sqlite3_stmt *pWriteParent; sqlite3_stmt *pDeleteParent; - int eCoordType; + RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ }; -/* Possible values for eCoordType: */ +/* Possible values for Rtree.eCoordType: */ #define RTREE_COORD_REAL32 0 #define RTREE_COORD_INT32 1 @@ -142392,12 +149288,31 @@ #ifdef SQLITE_RTREE_INT_ONLY typedef sqlite3_int64 RtreeDValue; /* High accuracy coordinate */ typedef int RtreeValue; /* Low accuracy coordinate */ +# define RTREE_ZERO 0 #else typedef double RtreeDValue; /* High accuracy coordinate */ typedef float RtreeValue; /* Low accuracy coordinate */ +# define RTREE_ZERO 0.0 #endif /* +** When doing a search of an r-tree, instances of the following structure +** record intermediate results from the tree walk. +** +** The id is always a node-id. For iLevel>=1 the id is the node-id of +** the node that the RtreeSearchPoint represents. When iLevel==0, however, +** the id is of the parent node and the cell that RtreeSearchPoint +** represents is the iCell-th entry in the parent node. +*/ +struct RtreeSearchPoint { + RtreeDValue rScore; /* The score for this node. Smallest goes first. */ + sqlite3_int64 id; /* Node ID */ + u8 iLevel; /* 0=entries. 1=leaf node. 2+ for higher */ + u8 eWithin; /* PARTLY_WITHIN or FULLY_WITHIN */ + u8 iCell; /* Cell index within the node */ +}; + +/* ** The minimum number of cells allowed for a node is a third of the ** maximum. In Gutman's notation: ** @@ -142419,21 +149334,44 @@ */ #define RTREE_MAX_DEPTH 40 + +/* +** Number of entries in the cursor RtreeNode cache. The first entry is +** used to cache the RtreeNode for RtreeCursor.sPoint. The remaining +** entries cache the RtreeNode for the first elements of the priority queue. +*/ +#define RTREE_CACHE_SZ 5 + /* ** An rtree cursor object. */ struct RtreeCursor { - sqlite3_vtab_cursor base; - RtreeNode *pNode; /* Node cursor is currently pointing at */ - int iCell; /* Index of current cell in pNode */ + sqlite3_vtab_cursor base; /* Base class. Must be first */ + u8 atEOF; /* True if at end of search */ + u8 bPoint; /* True if sPoint is valid */ int iStrategy; /* Copy of idxNum search parameter */ int nConstraint; /* Number of entries in aConstraint */ RtreeConstraint *aConstraint; /* Search constraints. */ + int nPointAlloc; /* Number of slots allocated for aPoint[] */ + int nPoint; /* Number of slots used in aPoint[] */ + int mxLevel; /* iLevel value for root of the tree */ + RtreeSearchPoint *aPoint; /* Priority queue for search points */ + RtreeSearchPoint sPoint; /* Cached next search point */ + RtreeNode *aNode[RTREE_CACHE_SZ]; /* Rtree node cache */ + u32 anQueue[RTREE_MAX_DEPTH+1]; /* Number of queued entries by iLevel */ }; +/* Return the Rtree of a RtreeCursor */ +#define RTREE_OF_CURSOR(X) ((Rtree*)((X)->base.pVtab)) + +/* +** A coordinate can be either a floating point number or a integer. All +** coordinates within a single R-Tree are always of the same time. +*/ union RtreeCoord { - RtreeValue f; - int i; + RtreeValue f; /* Floating point value */ + int i; /* Integer value */ + u32 u; /* Unsigned for byte-order conversions */ }; /* @@ -142458,74 +149396,90 @@ struct RtreeConstraint { int iCoord; /* Index of constrained coordinate */ int op; /* Constraining operation */ - RtreeDValue rValue; /* Constraint value. */ - int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*); - sqlite3_rtree_geometry *pGeom; /* Constraint callback argument for a MATCH */ + union { + RtreeDValue rValue; /* Constraint value. */ + int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*); + int (*xQueryFunc)(sqlite3_rtree_query_info*); + } u; + sqlite3_rtree_query_info *pInfo; /* xGeom and xQueryFunc argument */ }; /* Possible values for RtreeConstraint.op */ -#define RTREE_EQ 0x41 -#define RTREE_LE 0x42 -#define RTREE_LT 0x43 -#define RTREE_GE 0x44 -#define RTREE_GT 0x45 -#define RTREE_MATCH 0x46 +#define RTREE_EQ 0x41 /* A */ +#define RTREE_LE 0x42 /* B */ +#define RTREE_LT 0x43 /* C */ +#define RTREE_GE 0x44 /* D */ +#define RTREE_GT 0x45 /* E */ +#define RTREE_MATCH 0x46 /* F: Old-style sqlite3_rtree_geometry_callback() */ +#define RTREE_QUERY 0x47 /* G: New-style sqlite3_rtree_query_callback() */ + /* ** An rtree structure node. */ struct RtreeNode { - RtreeNode *pParent; /* Parent node */ - i64 iNode; - int nRef; - int isDirty; - u8 *zData; - RtreeNode *pNext; /* Next node in this hash chain */ + RtreeNode *pParent; /* Parent node */ + i64 iNode; /* The node number */ + int nRef; /* Number of references to this node */ + int isDirty; /* True if the node needs to be written to disk */ + u8 *zData; /* Content of the node, as should be on disk */ + RtreeNode *pNext; /* Next node in this hash collision chain */ }; + +/* Return the number of cells in a node */ #define NCELL(pNode) readInt16(&(pNode)->zData[2]) /* -** Structure to store a deserialized rtree record. +** A single cell from a node, deserialized */ struct RtreeCell { - i64 iRowid; - RtreeCoord aCoord[RTREE_MAX_DIMENSIONS*2]; + i64 iRowid; /* Node or entry ID */ + RtreeCoord aCoord[RTREE_MAX_DIMENSIONS*2]; /* Bounding box coordinates */ }; /* +** This object becomes the sqlite3_user_data() for the SQL functions +** that are created by sqlite3_rtree_geometry_callback() and +** sqlite3_rtree_query_callback() and which appear on the right of MATCH +** operators in order to constrain a search. +** +** xGeom and xQueryFunc are the callback functions. Exactly one of +** xGeom and xQueryFunc fields is non-NULL, depending on whether the +** SQL function was created using sqlite3_rtree_geometry_callback() or +** sqlite3_rtree_query_callback(). +** +** This object is deleted automatically by the destructor mechanism in +** sqlite3_create_function_v2(). +*/ +struct RtreeGeomCallback { + int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*); + int (*xQueryFunc)(sqlite3_rtree_query_info*); + void (*xDestructor)(void*); + void *pContext; +}; + + +/* ** Value for the first field of every RtreeMatchArg object. The MATCH ** operator tests that the first field of a blob operand matches this ** value to avoid operating on invalid blobs (which could cause a segfault). */ #define RTREE_GEOMETRY_MAGIC 0x891245AB /* -** An instance of this structure must be supplied as a blob argument to -** the right-hand-side of an SQL MATCH operator used to constrain an -** r-tree query. +** An instance of this structure (in the form of a BLOB) is returned by +** the SQL functions that sqlite3_rtree_geometry_callback() and +** sqlite3_rtree_query_callback() create, and is read as the right-hand +** operand to the MATCH operator of an R-Tree. */ struct RtreeMatchArg { - u32 magic; /* Always RTREE_GEOMETRY_MAGIC */ - int (*xGeom)(sqlite3_rtree_geometry *, int, RtreeDValue*, int *); - void *pContext; - int nParam; - RtreeDValue aParam[1]; + u32 magic; /* Always RTREE_GEOMETRY_MAGIC */ + RtreeGeomCallback cb; /* Info about the callback functions */ + int nParam; /* Number of parameters to the SQL function */ + RtreeDValue aParam[1]; /* Values for parameters to the SQL function */ }; -/* -** When a geometry callback is created (see sqlite3_rtree_geometry_callback), -** a single instance of the following structure is allocated. It is used -** as the context for the user-function created by by s_r_g_c(). The object -** is eventually deleted by the destructor mechanism provided by -** sqlite3_create_function_v2() (which is called by s_r_g_c() to create -** the geometry callback function). -*/ -struct RtreeGeomCallback { - int (*xGeom)(sqlite3_rtree_geometry*, int, RtreeDValue*, int*); - void *pContext; -}; - #ifndef MAX # define MAX(x,y) ((x) < (y) ? (y) : (x)) #endif @@ -142541,13 +149495,12 @@ return (p[0]<<8) + p[1]; } static void readCoord(u8 *p, RtreeCoord *pCoord){ - u32 i = ( + pCoord->u = ( (((u32)p[0]) << 24) + (((u32)p[1]) << 16) + (((u32)p[2]) << 8) + (((u32)p[3]) << 0) ); - *(u32 *)pCoord = i; } static i64 readInt64(u8 *p){ return ( @@ -142576,7 +149529,7 @@ u32 i; assert( sizeof(RtreeCoord)==4 ); assert( sizeof(u32)==4 ); - i = *(u32 *)pCoord; + i = pCoord->u; p[0] = (i>>24)&0xFF; p[1] = (i>>16)&0xFF; p[2] = (i>> 8)&0xFF; @@ -142617,10 +149570,7 @@ ** in the Rtree.aHash table. */ static int nodeHash(i64 iNode){ - return ( - (iNode>>56) ^ (iNode>>48) ^ (iNode>>40) ^ (iNode>>32) ^ - (iNode>>24) ^ (iNode>>16) ^ (iNode>> 8) ^ (iNode>> 0) - ) % HASHSIZE; + return iNode % HASHSIZE; } /* @@ -142680,8 +149630,7 @@ /* ** Obtain a reference to an r-tree node. */ -static int -nodeAcquire( +static int nodeAcquire( Rtree *pRtree, /* R-tree structure */ i64 iNode, /* Node number to load */ RtreeNode *pParent, /* Either the parent node or NULL */ @@ -142770,10 +149719,10 @@ ** Overwrite cell iCell of node pNode with the contents of pCell. */ static void nodeOverwriteCell( - Rtree *pRtree, - RtreeNode *pNode, - RtreeCell *pCell, - int iCell + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node into which the cell is to be written */ + RtreeCell *pCell, /* The cell to write */ + int iCell /* Index into pNode into which pCell is written */ ){ int ii; u8 *p = &pNode->zData[4 + pRtree->nBytesPerCell*iCell]; @@ -142785,7 +149734,7 @@ } /* -** Remove cell the cell with index iCell from node pNode. +** Remove the cell with index iCell from node pNode. */ static void nodeDeleteCell(Rtree *pRtree, RtreeNode *pNode, int iCell){ u8 *pDst = &pNode->zData[4 + pRtree->nBytesPerCell*iCell]; @@ -142802,11 +149751,10 @@ ** ** If there is not enough free space in pNode, return SQLITE_FULL. */ -static int -nodeInsertCell( - Rtree *pRtree, - RtreeNode *pNode, - RtreeCell *pCell +static int nodeInsertCell( + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* Write new cell into this node */ + RtreeCell *pCell /* The cell to be inserted */ ){ int nCell; /* Current number of cells in pNode */ int nMaxCell; /* Maximum number of cells for pNode */ @@ -142827,8 +149775,7 @@ /* ** If the node is dirty, write it out to the database. */ -static int -nodeWrite(Rtree *pRtree, RtreeNode *pNode){ +static int nodeWrite(Rtree *pRtree, RtreeNode *pNode){ int rc = SQLITE_OK; if( pNode->isDirty ){ sqlite3_stmt *p = pRtree->pWriteNode; @@ -142853,8 +149800,7 @@ ** Release a reference to a node. If the node is dirty and the reference ** count drops to zero, the node data is written to the database. */ -static int -nodeRelease(Rtree *pRtree, RtreeNode *pNode){ +static int nodeRelease(Rtree *pRtree, RtreeNode *pNode){ int rc = SQLITE_OK; if( pNode ){ assert( pNode->nRef>0 ); @@ -142882,9 +149828,9 @@ ** an internal node, then the 64-bit integer is a child page number. */ static i64 nodeGetRowid( - Rtree *pRtree, - RtreeNode *pNode, - int iCell + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node from which to extract the ID */ + int iCell /* The cell index from which to extract the ID */ ){ assert( iCellzData[4 + pRtree->nBytesPerCell*iCell]); @@ -142894,11 +149840,11 @@ ** Return coordinate iCoord from cell iCell in node pNode. */ static void nodeGetCoord( - Rtree *pRtree, - RtreeNode *pNode, - int iCell, - int iCoord, - RtreeCoord *pCoord /* Space to write result to */ + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node from which to extract a coordinate */ + int iCell, /* The index of the cell within the node */ + int iCoord, /* Which coordinate to extract */ + RtreeCoord *pCoord /* OUT: Space to write result to */ ){ readCoord(&pNode->zData[12 + pRtree->nBytesPerCell*iCell + 4*iCoord], pCoord); } @@ -142908,15 +149854,19 @@ ** to by pCell with the results. */ static void nodeGetCell( - Rtree *pRtree, - RtreeNode *pNode, - int iCell, - RtreeCell *pCell + Rtree *pRtree, /* The overall R-Tree */ + RtreeNode *pNode, /* The node containing the cell to be read */ + int iCell, /* Index of the cell within the node */ + RtreeCell *pCell /* OUT: Write the cell contents here */ ){ + u8 *pData; + RtreeCoord *pCoord; int ii; pCell->iRowid = nodeGetRowid(pRtree, pNode, iCell); + pData = pNode->zData + (12 + pRtree->nBytesPerCell*iCell); + pCoord = pCell->aCoord; for(ii=0; iinDim*2; ii++){ - nodeGetCoord(pRtree, pNode, iCell, ii, &pCell->aCoord[ii]); + readCoord(&pData[ii*4], &pCoord[ii]); } } @@ -143042,10 +149992,10 @@ if( pCsr->aConstraint ){ int i; /* Used to iterate through constraint array */ for(i=0; inConstraint; i++){ - sqlite3_rtree_geometry *pGeom = pCsr->aConstraint[i].pGeom; - if( pGeom ){ - if( pGeom->xDelUser ) pGeom->xDelUser(pGeom->pUser); - sqlite3_free(pGeom); + sqlite3_rtree_query_info *pInfo = pCsr->aConstraint[i].pInfo; + if( pInfo ){ + if( pInfo->xDelUser ) pInfo->xDelUser(pInfo->pUser); + sqlite3_free(pInfo); } } sqlite3_free(pCsr->aConstraint); @@ -143058,12 +150008,13 @@ */ static int rtreeClose(sqlite3_vtab_cursor *cur){ Rtree *pRtree = (Rtree *)(cur->pVtab); - int rc; + int ii; RtreeCursor *pCsr = (RtreeCursor *)cur; freeCursorConstraints(pCsr); - rc = nodeRelease(pRtree, pCsr->pNode); + sqlite3_free(pCsr->aPoint); + for(ii=0; iiaNode[ii]); sqlite3_free(pCsr); - return rc; + return SQLITE_OK; } /* @@ -143074,194 +150025,164 @@ */ static int rtreeEof(sqlite3_vtab_cursor *cur){ RtreeCursor *pCsr = (RtreeCursor *)cur; - return (pCsr->pNode==0); + return pCsr->atEOF; } /* -** The r-tree constraint passed as the second argument to this function is -** guaranteed to be a MATCH constraint. +** Convert raw bits from the on-disk RTree record into a coordinate value. +** The on-disk format is big-endian and needs to be converted for little- +** endian platforms. The on-disk record stores integer coordinates if +** eInt is true and it stores 32-bit floating point records if eInt is +** false. a[] is the four bytes of the on-disk record to be decoded. +** Store the results in "r". +** +** There are three versions of this macro, one each for little-endian and +** big-endian processors and a third generic implementation. The endian- +** specific implementations are much faster and are preferred if the +** processor endianness is known at compile-time. The SQLITE_BYTEORDER +** macro is part of sqliteInt.h and hence the endian-specific +** implementation will only be used if this module is compiled as part +** of the amalgamation. */ -static int testRtreeGeom( - Rtree *pRtree, /* R-Tree object */ - RtreeConstraint *pConstraint, /* MATCH constraint to test */ - RtreeCell *pCell, /* Cell to test */ - int *pbRes /* OUT: Test result */ -){ - int i; - RtreeDValue aCoord[RTREE_MAX_DIMENSIONS*2]; - int nCoord = pRtree->nDim*2; - - assert( pConstraint->op==RTREE_MATCH ); - assert( pConstraint->pGeom ); - - for(i=0; iaCoord[i]); - } - return pConstraint->xGeom(pConstraint->pGeom, nCoord, aCoord, pbRes); +#if defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==1234 +#define RTREE_DECODE_COORD(eInt, a, r) { \ + RtreeCoord c; /* Coordinate decoded */ \ + memcpy(&c.u,a,4); \ + c.u = ((c.u>>24)&0xff)|((c.u>>8)&0xff00)| \ + ((c.u&0xff)<<24)|((c.u&0xff00)<<8); \ + r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ } +#elif defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==4321 +#define RTREE_DECODE_COORD(eInt, a, r) { \ + RtreeCoord c; /* Coordinate decoded */ \ + memcpy(&c.u,a,4); \ + r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ +} +#else +#define RTREE_DECODE_COORD(eInt, a, r) { \ + RtreeCoord c; /* Coordinate decoded */ \ + c.u = ((u32)a[0]<<24) + ((u32)a[1]<<16) \ + +((u32)a[2]<<8) + a[3]; \ + r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ +} +#endif -/* -** Cursor pCursor currently points to a cell in a non-leaf page. -** Set *pbEof to true if the sub-tree headed by the cell is filtered -** (excluded) by the constraints in the pCursor->aConstraint[] -** array, or false otherwise. -** -** Return SQLITE_OK if successful or an SQLite error code if an error -** occurs within a geometry callback. +/* +** Check the RTree node or entry given by pCellData and p against the MATCH +** constraint pConstraint. */ -static int testRtreeCell(Rtree *pRtree, RtreeCursor *pCursor, int *pbEof){ - RtreeCell cell; - int ii; - int bRes = 0; - int rc = SQLITE_OK; +static int rtreeCallbackConstraint( + RtreeConstraint *pConstraint, /* The constraint to test */ + int eInt, /* True if RTree holding integer coordinates */ + u8 *pCellData, /* Raw cell content */ + RtreeSearchPoint *pSearch, /* Container of this cell */ + sqlite3_rtree_dbl *prScore, /* OUT: score for the cell */ + int *peWithin /* OUT: visibility of the cell */ +){ + int i; /* Loop counter */ + sqlite3_rtree_query_info *pInfo = pConstraint->pInfo; /* Callback info */ + int nCoord = pInfo->nCoord; /* No. of coordinates */ + int rc; /* Callback return code */ + sqlite3_rtree_dbl aCoord[RTREE_MAX_DIMENSIONS*2]; /* Decoded coordinates */ - nodeGetCell(pRtree, pCursor->pNode, pCursor->iCell, &cell); - for(ii=0; bRes==0 && iinConstraint; ii++){ - RtreeConstraint *p = &pCursor->aConstraint[ii]; - RtreeDValue cell_min = DCOORD(cell.aCoord[(p->iCoord>>1)*2]); - RtreeDValue cell_max = DCOORD(cell.aCoord[(p->iCoord>>1)*2+1]); + assert( pConstraint->op==RTREE_MATCH || pConstraint->op==RTREE_QUERY ); + assert( nCoord==2 || nCoord==4 || nCoord==6 || nCoord==8 || nCoord==10 ); - assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE - || p->op==RTREE_GT || p->op==RTREE_EQ || p->op==RTREE_MATCH - ); - - switch( p->op ){ - case RTREE_LE: case RTREE_LT: - bRes = p->rValuerValue>cell_max; - break; - - case RTREE_EQ: - bRes = (p->rValue>cell_max || p->rValueop==RTREE_MATCH ); - rc = testRtreeGeom(pRtree, p, &cell, &bRes); - bRes = !bRes; - break; - } + if( pConstraint->op==RTREE_QUERY && pSearch->iLevel==1 ){ + pInfo->iRowid = readInt64(pCellData); + } + pCellData += 8; + for(i=0; iop==RTREE_MATCH ){ + rc = pConstraint->u.xGeom((sqlite3_rtree_geometry*)pInfo, + nCoord, aCoord, &i); + if( i==0 ) *peWithin = NOT_WITHIN; + *prScore = RTREE_ZERO; + }else{ + pInfo->aCoord = aCoord; + pInfo->iLevel = pSearch->iLevel - 1; + pInfo->rScore = pInfo->rParentScore = pSearch->rScore; + pInfo->eWithin = pInfo->eParentWithin = pSearch->eWithin; + rc = pConstraint->u.xQueryFunc(pInfo); + if( pInfo->eWithin<*peWithin ) *peWithin = pInfo->eWithin; + if( pInfo->rScore<*prScore || *prScorerScore; } } - - *pbEof = bRes; return rc; } /* -** Test if the cell that cursor pCursor currently points to -** would be filtered (excluded) by the constraints in the -** pCursor->aConstraint[] array. If so, set *pbEof to true before -** returning. If the cell is not filtered (excluded) by the constraints, -** set pbEof to zero. -** -** Return SQLITE_OK if successful or an SQLite error code if an error -** occurs within a geometry callback. -** -** This function assumes that the cell is part of a leaf node. +** Check the internal RTree node given by pCellData against constraint p. +** If this constraint cannot be satisfied by any child within the node, +** set *peWithin to NOT_WITHIN. */ -static int testRtreeEntry(Rtree *pRtree, RtreeCursor *pCursor, int *pbEof){ - RtreeCell cell; - int ii; - *pbEof = 0; +static void rtreeNonleafConstraint( + RtreeConstraint *p, /* The constraint to test */ + int eInt, /* True if RTree holds integer coordinates */ + u8 *pCellData, /* Raw cell content as appears on disk */ + int *peWithin /* Adjust downward, as appropriate */ +){ + sqlite3_rtree_dbl val; /* Coordinate value convert to a double */ - nodeGetCell(pRtree, pCursor->pNode, pCursor->iCell, &cell); - for(ii=0; iinConstraint; ii++){ - RtreeConstraint *p = &pCursor->aConstraint[ii]; - RtreeDValue coord = DCOORD(cell.aCoord[p->iCoord]); - int res; - assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE - || p->op==RTREE_GT || p->op==RTREE_EQ || p->op==RTREE_MATCH - ); - switch( p->op ){ - case RTREE_LE: res = (coord<=p->rValue); break; - case RTREE_LT: res = (coordrValue); break; - case RTREE_GE: res = (coord>=p->rValue); break; - case RTREE_GT: res = (coord>p->rValue); break; - case RTREE_EQ: res = (coord==p->rValue); break; - default: { - int rc; - assert( p->op==RTREE_MATCH ); - rc = testRtreeGeom(pRtree, p, &cell, &res); - if( rc!=SQLITE_OK ){ - return rc; - } - break; - } - } + /* p->iCoord might point to either a lower or upper bound coordinate + ** in a coordinate pair. But make pCellData point to the lower bound. + */ + pCellData += 8 + 4*(p->iCoord&0xfe); - if( !res ){ - *pbEof = 1; - return SQLITE_OK; - } - } + assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE + || p->op==RTREE_GT || p->op==RTREE_EQ ); + switch( p->op ){ + case RTREE_LE: + case RTREE_LT: + case RTREE_EQ: + RTREE_DECODE_COORD(eInt, pCellData, val); + /* val now holds the lower bound of the coordinate pair */ + if( p->u.rValue>=val ) return; + if( p->op!=RTREE_EQ ) break; /* RTREE_LE and RTREE_LT end here */ + /* Fall through for the RTREE_EQ case */ - return SQLITE_OK; + default: /* RTREE_GT or RTREE_GE, or fallthrough of RTREE_EQ */ + pCellData += 4; + RTREE_DECODE_COORD(eInt, pCellData, val); + /* val now holds the upper bound of the coordinate pair */ + if( p->u.rValue<=val ) return; + } + *peWithin = NOT_WITHIN; } /* -** Cursor pCursor currently points at a node that heads a sub-tree of -** height iHeight (if iHeight==0, then the node is a leaf). Descend -** to point to the left-most cell of the sub-tree that matches the -** configured constraints. +** Check the leaf RTree cell given by pCellData against constraint p. +** If this constraint is not satisfied, set *peWithin to NOT_WITHIN. +** If the constraint is satisfied, leave *peWithin unchanged. +** +** The constraint is of the form: xN op $val +** +** The op is given by p->op. The xN is p->iCoord-th coordinate in +** pCellData. $val is given by p->u.rValue. */ -static int descendToCell( - Rtree *pRtree, - RtreeCursor *pCursor, - int iHeight, - int *pEof /* OUT: Set to true if cannot descend */ +static void rtreeLeafConstraint( + RtreeConstraint *p, /* The constraint to test */ + int eInt, /* True if RTree holds integer coordinates */ + u8 *pCellData, /* Raw cell content as appears on disk */ + int *peWithin /* Adjust downward, as appropriate */ ){ - int isEof; - int rc; - int ii; - RtreeNode *pChild; - sqlite3_int64 iRowid; + RtreeDValue xN; /* Coordinate value converted to a double */ - RtreeNode *pSavedNode = pCursor->pNode; - int iSavedCell = pCursor->iCell; - - assert( iHeight>=0 ); - - if( iHeight==0 ){ - rc = testRtreeEntry(pRtree, pCursor, &isEof); - }else{ - rc = testRtreeCell(pRtree, pCursor, &isEof); + assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE + || p->op==RTREE_GT || p->op==RTREE_EQ ); + pCellData += 8 + p->iCoord*4; + RTREE_DECODE_COORD(eInt, pCellData, xN); + switch( p->op ){ + case RTREE_LE: if( xN <= p->u.rValue ) return; break; + case RTREE_LT: if( xN < p->u.rValue ) return; break; + case RTREE_GE: if( xN >= p->u.rValue ) return; break; + case RTREE_GT: if( xN > p->u.rValue ) return; break; + default: if( xN == p->u.rValue ) return; break; } - if( rc!=SQLITE_OK || isEof || iHeight==0 ){ - goto descend_to_cell_out; - } - - iRowid = nodeGetRowid(pRtree, pCursor->pNode, pCursor->iCell); - rc = nodeAcquire(pRtree, iRowid, pCursor->pNode, &pChild); - if( rc!=SQLITE_OK ){ - goto descend_to_cell_out; - } - - nodeRelease(pRtree, pCursor->pNode); - pCursor->pNode = pChild; - isEof = 1; - for(ii=0; isEof && iiiCell = ii; - rc = descendToCell(pRtree, pCursor, iHeight-1, &isEof); - if( rc!=SQLITE_OK ){ - goto descend_to_cell_out; - } - } - - if( isEof ){ - assert( pCursor->pNode==pChild ); - nodeReference(pSavedNode); - nodeRelease(pRtree, pChild); - pCursor->pNode = pSavedNode; - pCursor->iCell = iSavedCell; - } - -descend_to_cell_out: - *pEof = isEof; - return rc; + *peWithin = NOT_WITHIN; } /* @@ -143276,6 +150197,7 @@ ){ int ii; int nCell = NCELL(pNode); + assert( nCell<200 ); for(ii=0; iipVtab); - RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; - int rc = SQLITE_OK; +static int rtreeSearchPointCompare( + const RtreeSearchPoint *pA, + const RtreeSearchPoint *pB +){ + if( pA->rScorerScore ) return -1; + if( pA->rScore>pB->rScore ) return +1; + if( pA->iLeveliLevel ) return -1; + if( pA->iLevel>pB->iLevel ) return +1; + return 0; +} - /* RtreeCursor.pNode must not be NULL. If is is NULL, then this cursor is - ** already at EOF. It is against the rules to call the xNext() method of - ** a cursor that has already reached EOF. - */ - assert( pCsr->pNode ); +/* +** Interchange to search points in a cursor. +*/ +static void rtreeSearchPointSwap(RtreeCursor *p, int i, int j){ + RtreeSearchPoint t = p->aPoint[i]; + assert( iaPoint[i] = p->aPoint[j]; + p->aPoint[j] = t; + i++; j++; + if( i=RTREE_CACHE_SZ ){ + nodeRelease(RTREE_OF_CURSOR(p), p->aNode[i]); + p->aNode[i] = 0; + }else{ + RtreeNode *pTemp = p->aNode[i]; + p->aNode[i] = p->aNode[j]; + p->aNode[j] = pTemp; + } + } +} - if( pCsr->iStrategy==1 ){ - /* This "scan" is a direct lookup by rowid. There is no next entry. */ - nodeRelease(pRtree, pCsr->pNode); - pCsr->pNode = 0; +/* +** Return the search point with the lowest current score. +*/ +static RtreeSearchPoint *rtreeSearchPointFirst(RtreeCursor *pCur){ + return pCur->bPoint ? &pCur->sPoint : pCur->nPoint ? pCur->aPoint : 0; +} + +/* +** Get the RtreeNode for the search point with the lowest score. +*/ +static RtreeNode *rtreeNodeOfFirstSearchPoint(RtreeCursor *pCur, int *pRC){ + sqlite3_int64 id; + int ii = 1 - pCur->bPoint; + assert( ii==0 || ii==1 ); + assert( pCur->bPoint || pCur->nPoint ); + if( pCur->aNode[ii]==0 ){ + assert( pRC!=0 ); + id = ii ? pCur->aPoint[0].id : pCur->sPoint.id; + *pRC = nodeAcquire(RTREE_OF_CURSOR(pCur), id, 0, &pCur->aNode[ii]); + } + return pCur->aNode[ii]; +} + +/* +** Push a new element onto the priority queue +*/ +static RtreeSearchPoint *rtreeEnqueue( + RtreeCursor *pCur, /* The cursor */ + RtreeDValue rScore, /* Score for the new search point */ + u8 iLevel /* Level for the new search point */ +){ + int i, j; + RtreeSearchPoint *pNew; + if( pCur->nPoint>=pCur->nPointAlloc ){ + int nNew = pCur->nPointAlloc*2 + 8; + pNew = sqlite3_realloc(pCur->aPoint, nNew*sizeof(pCur->aPoint[0])); + if( pNew==0 ) return 0; + pCur->aPoint = pNew; + pCur->nPointAlloc = nNew; + } + i = pCur->nPoint++; + pNew = pCur->aPoint + i; + pNew->rScore = rScore; + pNew->iLevel = iLevel; + assert( iLevel<=RTREE_MAX_DEPTH ); + while( i>0 ){ + RtreeSearchPoint *pParent; + j = (i-1)/2; + pParent = pCur->aPoint + j; + if( rtreeSearchPointCompare(pNew, pParent)>=0 ) break; + rtreeSearchPointSwap(pCur, j, i); + i = j; + pNew = pParent; + } + return pNew; +} + +/* +** Allocate a new RtreeSearchPoint and return a pointer to it. Return +** NULL if malloc fails. +*/ +static RtreeSearchPoint *rtreeSearchPointNew( + RtreeCursor *pCur, /* The cursor */ + RtreeDValue rScore, /* Score for the new search point */ + u8 iLevel /* Level for the new search point */ +){ + RtreeSearchPoint *pNew, *pFirst; + pFirst = rtreeSearchPointFirst(pCur); + pCur->anQueue[iLevel]++; + if( pFirst==0 + || pFirst->rScore>rScore + || (pFirst->rScore==rScore && pFirst->iLevel>iLevel) + ){ + if( pCur->bPoint ){ + int ii; + pNew = rtreeEnqueue(pCur, rScore, iLevel); + if( pNew==0 ) return 0; + ii = (int)(pNew - pCur->aPoint) + 1; + if( iiaNode[ii]==0 ); + pCur->aNode[ii] = pCur->aNode[0]; + }else{ + nodeRelease(RTREE_OF_CURSOR(pCur), pCur->aNode[0]); + } + pCur->aNode[0] = 0; + *pNew = pCur->sPoint; + } + pCur->sPoint.rScore = rScore; + pCur->sPoint.iLevel = iLevel; + pCur->bPoint = 1; + return &pCur->sPoint; }else{ - /* Move to the next entry that matches the configured constraints. */ - int iHeight = 0; - while( pCsr->pNode ){ - RtreeNode *pNode = pCsr->pNode; - int nCell = NCELL(pNode); - for(pCsr->iCell++; pCsr->iCelliCell++){ - int isEof; - rc = descendToCell(pRtree, pCsr, iHeight, &isEof); - if( rc!=SQLITE_OK || !isEof ){ - return rc; + return rtreeEnqueue(pCur, rScore, iLevel); + } +} + +#if 0 +/* Tracing routines for the RtreeSearchPoint queue */ +static void tracePoint(RtreeSearchPoint *p, int idx, RtreeCursor *pCur){ + if( idx<0 ){ printf(" s"); }else{ printf("%2d", idx); } + printf(" %d.%05lld.%02d %g %d", + p->iLevel, p->id, p->iCell, p->rScore, p->eWithin + ); + idx++; + if( idxaNode[idx]); + }else{ + printf("\n"); + } +} +static void traceQueue(RtreeCursor *pCur, const char *zPrefix){ + int ii; + printf("=== %9s ", zPrefix); + if( pCur->bPoint ){ + tracePoint(&pCur->sPoint, -1, pCur); + } + for(ii=0; iinPoint; ii++){ + if( ii>0 || pCur->bPoint ) printf(" "); + tracePoint(&pCur->aPoint[ii], ii, pCur); + } +} +# define RTREE_QUEUE_TRACE(A,B) traceQueue(A,B) +#else +# define RTREE_QUEUE_TRACE(A,B) /* no-op */ +#endif + +/* Remove the search point with the lowest current score. +*/ +static void rtreeSearchPointPop(RtreeCursor *p){ + int i, j, k, n; + i = 1 - p->bPoint; + assert( i==0 || i==1 ); + if( p->aNode[i] ){ + nodeRelease(RTREE_OF_CURSOR(p), p->aNode[i]); + p->aNode[i] = 0; + } + if( p->bPoint ){ + p->anQueue[p->sPoint.iLevel]--; + p->bPoint = 0; + }else if( p->nPoint ){ + p->anQueue[p->aPoint[0].iLevel]--; + n = --p->nPoint; + p->aPoint[0] = p->aPoint[n]; + if( naNode[1] = p->aNode[n+1]; + p->aNode[n+1] = 0; + } + i = 0; + while( (j = i*2+1)aPoint[k], &p->aPoint[j])<0 ){ + if( rtreeSearchPointCompare(&p->aPoint[k], &p->aPoint[i])<0 ){ + rtreeSearchPointSwap(p, i, k); + i = k; + }else{ + break; } + }else{ + if( rtreeSearchPointCompare(&p->aPoint[j], &p->aPoint[i])<0 ){ + rtreeSearchPointSwap(p, i, j); + i = j; + }else{ + break; + } } - pCsr->pNode = pNode->pParent; - rc = nodeParentIndex(pRtree, pNode, &pCsr->iCell); - if( rc!=SQLITE_OK ){ - return rc; + } + } +} + + +/* +** Continue the search on cursor pCur until the front of the queue +** contains an entry suitable for returning as a result-set row, +** or until the RtreeSearchPoint queue is empty, indicating that the +** query has completed. +*/ +static int rtreeStepToLeaf(RtreeCursor *pCur){ + RtreeSearchPoint *p; + Rtree *pRtree = RTREE_OF_CURSOR(pCur); + RtreeNode *pNode; + int eWithin; + int rc = SQLITE_OK; + int nCell; + int nConstraint = pCur->nConstraint; + int ii; + int eInt; + RtreeSearchPoint x; + + eInt = pRtree->eCoordType==RTREE_COORD_INT32; + while( (p = rtreeSearchPointFirst(pCur))!=0 && p->iLevel>0 ){ + pNode = rtreeNodeOfFirstSearchPoint(pCur, &rc); + if( rc ) return rc; + nCell = NCELL(pNode); + assert( nCell<200 ); + while( p->iCellzData + (4+pRtree->nBytesPerCell*p->iCell); + eWithin = FULLY_WITHIN; + for(ii=0; iiaConstraint + ii; + if( pConstraint->op>=RTREE_MATCH ){ + rc = rtreeCallbackConstraint(pConstraint, eInt, pCellData, p, + &rScore, &eWithin); + if( rc ) return rc; + }else if( p->iLevel==1 ){ + rtreeLeafConstraint(pConstraint, eInt, pCellData, &eWithin); + }else{ + rtreeNonleafConstraint(pConstraint, eInt, pCellData, &eWithin); + } + if( eWithin==NOT_WITHIN ) break; } - nodeReference(pCsr->pNode); - nodeRelease(pRtree, pNode); - iHeight++; + p->iCell++; + if( eWithin==NOT_WITHIN ) continue; + x.iLevel = p->iLevel - 1; + if( x.iLevel ){ + x.id = readInt64(pCellData); + x.iCell = 0; + }else{ + x.id = p->id; + x.iCell = p->iCell - 1; + } + if( p->iCell>=nCell ){ + RTREE_QUEUE_TRACE(pCur, "POP-S:"); + rtreeSearchPointPop(pCur); + } + if( rScoreeWithin = eWithin; + p->id = x.id; + p->iCell = x.iCell; + RTREE_QUEUE_TRACE(pCur, "PUSH-S:"); + break; } + if( p->iCell>=nCell ){ + RTREE_QUEUE_TRACE(pCur, "POP-Se:"); + rtreeSearchPointPop(pCur); + } } + pCur->atEOF = p==0; + return SQLITE_OK; +} +/* +** Rtree virtual table module xNext method. +*/ +static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){ + RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; + int rc = SQLITE_OK; + + /* Move to the next entry that matches the configured constraints. */ + RTREE_QUEUE_TRACE(pCsr, "POP-Nx:"); + rtreeSearchPointPop(pCsr); + rc = rtreeStepToLeaf(pCsr); return rc; } /* ** Rtree virtual table module xRowid method. */ static int rtreeRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *pRowid){ - Rtree *pRtree = (Rtree *)pVtabCursor->pVtab; RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; - - assert(pCsr->pNode); - *pRowid = nodeGetRowid(pRtree, pCsr->pNode, pCsr->iCell); - - return SQLITE_OK; + RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr); + int rc = SQLITE_OK; + RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc); + if( rc==SQLITE_OK && p ){ + *pRowid = nodeGetRowid(RTREE_OF_CURSOR(pCsr), pNode, p->iCell); + } + return rc; } /* @@ -143362,13 +150539,18 @@ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ Rtree *pRtree = (Rtree *)cur->pVtab; RtreeCursor *pCsr = (RtreeCursor *)cur; + RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr); + RtreeCoord c; + int rc = SQLITE_OK; + RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc); + if( rc ) return rc; + if( p==0 ) return SQLITE_OK; if( i==0 ){ - i64 iRowid = nodeGetRowid(pRtree, pCsr->pNode, pCsr->iCell); - sqlite3_result_int64(ctx, iRowid); + sqlite3_result_int64(ctx, nodeGetRowid(pRtree, pNode, p->iCell)); }else{ - RtreeCoord c; - nodeGetCoord(pRtree, pCsr->pNode, pCsr->iCell, i-1, &c); + if( rc ) return rc; + nodeGetCoord(pRtree, pNode, p->iCell, i-1, &c); #ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ sqlite3_result_double(ctx, c.f); @@ -143379,7 +150561,6 @@ sqlite3_result_int(ctx, c.i); } } - return SQLITE_OK; } @@ -143390,12 +150571,18 @@ ** *ppLeaf to 0 and return SQLITE_OK. If an error occurs, set *ppLeaf ** to zero and return an SQLite error code. */ -static int findLeafNode(Rtree *pRtree, i64 iRowid, RtreeNode **ppLeaf){ +static int findLeafNode( + Rtree *pRtree, /* RTree to search */ + i64 iRowid, /* The rowid searching for */ + RtreeNode **ppLeaf, /* Write the node here */ + sqlite3_int64 *piNode /* Write the node-id here */ +){ int rc; *ppLeaf = 0; sqlite3_bind_int64(pRtree->pReadRowid, 1, iRowid); if( sqlite3_step(pRtree->pReadRowid)==SQLITE_ROW ){ i64 iNode = sqlite3_column_int64(pRtree->pReadRowid, 0); + if( piNode ) *piNode = iNode; rc = nodeAcquire(pRtree, iNode, 0, ppLeaf); sqlite3_reset(pRtree->pReadRowid); }else{ @@ -143411,9 +150598,10 @@ ** operator. */ static int deserializeGeometry(sqlite3_value *pValue, RtreeConstraint *pCons){ - RtreeMatchArg *p; - sqlite3_rtree_geometry *pGeom; - int nBlob; + RtreeMatchArg *pBlob; /* BLOB returned by geometry function */ + sqlite3_rtree_query_info *pInfo; /* Callback information */ + int nBlob; /* Size of the geometry function blob */ + int nExpected; /* Expected size of the BLOB */ /* Check that value is actually a blob. */ if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR; @@ -143426,27 +150614,29 @@ return SQLITE_ERROR; } - pGeom = (sqlite3_rtree_geometry *)sqlite3_malloc( - sizeof(sqlite3_rtree_geometry) + nBlob - ); - if( !pGeom ) return SQLITE_NOMEM; - memset(pGeom, 0, sizeof(sqlite3_rtree_geometry)); - p = (RtreeMatchArg *)&pGeom[1]; + pInfo = (sqlite3_rtree_query_info*)sqlite3_malloc( sizeof(*pInfo)+nBlob ); + if( !pInfo ) return SQLITE_NOMEM; + memset(pInfo, 0, sizeof(*pInfo)); + pBlob = (RtreeMatchArg*)&pInfo[1]; - memcpy(p, sqlite3_value_blob(pValue), nBlob); - if( p->magic!=RTREE_GEOMETRY_MAGIC - || nBlob!=(int)(sizeof(RtreeMatchArg) + (p->nParam-1)*sizeof(RtreeDValue)) - ){ - sqlite3_free(pGeom); + memcpy(pBlob, sqlite3_value_blob(pValue), nBlob); + nExpected = (int)(sizeof(RtreeMatchArg) + + (pBlob->nParam-1)*sizeof(RtreeDValue)); + if( pBlob->magic!=RTREE_GEOMETRY_MAGIC || nBlob!=nExpected ){ + sqlite3_free(pInfo); return SQLITE_ERROR; } + pInfo->pContext = pBlob->cb.pContext; + pInfo->nParam = pBlob->nParam; + pInfo->aParam = pBlob->aParam; - pGeom->pContext = p->pContext; - pGeom->nParam = p->nParam; - pGeom->aParam = p->aParam; - - pCons->xGeom = p->xGeom; - pCons->pGeom = pGeom; + if( pBlob->cb.xGeom ){ + pCons->u.xGeom = pBlob->cb.xGeom; + }else{ + pCons->op = RTREE_QUERY; + pCons->u.xQueryFunc = pBlob->cb.xQueryFunc; + } + pCons->pInfo = pInfo; return SQLITE_OK; } @@ -143460,44 +150650,59 @@ ){ Rtree *pRtree = (Rtree *)pVtabCursor->pVtab; RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; - RtreeNode *pRoot = 0; int ii; int rc = SQLITE_OK; + int iCell = 0; rtreeReference(pRtree); + /* Reset the cursor to the same state as rtreeOpen() leaves it in. */ freeCursorConstraints(pCsr); - pCsr->iStrategy = idxNum; + sqlite3_free(pCsr->aPoint); + memset(pCsr, 0, sizeof(RtreeCursor)); + pCsr->base.pVtab = (sqlite3_vtab*)pRtree; + pCsr->iStrategy = idxNum; if( idxNum==1 ){ /* Special case - lookup by rowid. */ RtreeNode *pLeaf; /* Leaf on which the required cell resides */ + RtreeSearchPoint *p; /* Search point for the the leaf */ i64 iRowid = sqlite3_value_int64(argv[0]); - rc = findLeafNode(pRtree, iRowid, &pLeaf); - pCsr->pNode = pLeaf; - if( pLeaf ){ - assert( rc==SQLITE_OK ); - rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &pCsr->iCell); + i64 iNode = 0; + rc = findLeafNode(pRtree, iRowid, &pLeaf, &iNode); + if( rc==SQLITE_OK && pLeaf!=0 ){ + p = rtreeSearchPointNew(pCsr, RTREE_ZERO, 0); + assert( p!=0 ); /* Always returns pCsr->sPoint */ + pCsr->aNode[0] = pLeaf; + p->id = iNode; + p->eWithin = PARTLY_WITHIN; + rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &iCell); + p->iCell = iCell; + RTREE_QUEUE_TRACE(pCsr, "PUSH-F1:"); + }else{ + pCsr->atEOF = 1; } }else{ /* Normal case - r-tree scan. Set up the RtreeCursor.aConstraint array ** with the configured constraints. */ - if( argc>0 ){ + rc = nodeAcquire(pRtree, 1, 0, &pRoot); + if( rc==SQLITE_OK && argc>0 ){ pCsr->aConstraint = sqlite3_malloc(sizeof(RtreeConstraint)*argc); pCsr->nConstraint = argc; if( !pCsr->aConstraint ){ rc = SQLITE_NOMEM; }else{ memset(pCsr->aConstraint, 0, sizeof(RtreeConstraint)*argc); + memset(pCsr->anQueue, 0, sizeof(u32)*(pRtree->iDepth + 1)); assert( (idxStr==0 && argc==0) || (idxStr && (int)strlen(idxStr)==argc*2) ); for(ii=0; iiaConstraint[ii]; p->op = idxStr[ii*2]; - p->iCoord = idxStr[ii*2+1]-'a'; - if( p->op==RTREE_MATCH ){ + p->iCoord = idxStr[ii*2+1]-'0'; + if( p->op>=RTREE_MATCH ){ /* A MATCH operator. The right-hand-side must be a blob that ** can be cast into an RtreeMatchArg object. One created using ** an sqlite3_rtree_geometry_callback() SQL user function. @@ -143506,41 +150711,35 @@ if( rc!=SQLITE_OK ){ break; } + p->pInfo->nCoord = pRtree->nDim*2; + p->pInfo->anQueue = pCsr->anQueue; + p->pInfo->mxLevel = pRtree->iDepth + 1; }else{ #ifdef SQLITE_RTREE_INT_ONLY - p->rValue = sqlite3_value_int64(argv[ii]); + p->u.rValue = sqlite3_value_int64(argv[ii]); #else - p->rValue = sqlite3_value_double(argv[ii]); + p->u.rValue = sqlite3_value_double(argv[ii]); #endif } } } } - if( rc==SQLITE_OK ){ - pCsr->pNode = 0; - rc = nodeAcquire(pRtree, 1, 0, &pRoot); + RtreeSearchPoint *pNew; + pNew = rtreeSearchPointNew(pCsr, RTREE_ZERO, pRtree->iDepth+1); + if( pNew==0 ) return SQLITE_NOMEM; + pNew->id = 1; + pNew->iCell = 0; + pNew->eWithin = PARTLY_WITHIN; + assert( pCsr->bPoint==1 ); + pCsr->aNode[0] = pRoot; + pRoot = 0; + RTREE_QUEUE_TRACE(pCsr, "PUSH-Fm:"); + rc = rtreeStepToLeaf(pCsr); } - if( rc==SQLITE_OK ){ - int isEof = 1; - int nCell = NCELL(pRoot); - pCsr->pNode = pRoot; - for(pCsr->iCell=0; rc==SQLITE_OK && pCsr->iCelliCell++){ - assert( pCsr->pNode==pRoot ); - rc = descendToCell(pRtree, pCsr, pRtree->iDepth, &isEof); - if( !isEof ){ - break; - } - } - if( rc==SQLITE_OK && isEof ){ - assert( pCsr->pNode==pRoot ); - nodeRelease(pRtree, pRoot); - pCsr->pNode = 0; - } - assert( rc!=SQLITE_OK || !pCsr->pNode || pCsr->iCellpNode) ); - } } + nodeRelease(pRtree, pRoot); rtreeRelease(pRtree); return rc; } @@ -143642,7 +150841,7 @@ break; } zIdxStr[iIdx++] = op; - zIdxStr[iIdx++] = p->iColumn - 1 + 'a'; + zIdxStr[iIdx++] = p->iColumn - 1 + '0'; pIdxInfo->aConstraintUsage[ii].argvIndex = (iIdx/2); pIdxInfo->aConstraintUsage[ii].omit = 1; } @@ -143735,64 +150934,34 @@ return (cellArea(pRtree, &cell)-area); } -#if VARIANT_RSTARTREE_CHOOSESUBTREE || VARIANT_RSTARTREE_SPLIT static RtreeDValue cellOverlap( Rtree *pRtree, RtreeCell *p, RtreeCell *aCell, - int nCell, - int iExclude + int nCell ){ int ii; - RtreeDValue overlap = 0.0; + RtreeDValue overlap = RTREE_ZERO; for(ii=0; iinDim*2); jj+=2){ - RtreeDValue x1, x2; - - x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj])); - x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1])); - - if( x2nDim*2); jj+=2){ + RtreeDValue x1, x2; + x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj])); + x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1])); + if( x2iDepth-1) ){ - int jj; - aCell = sqlite3_malloc(sizeof(RtreeCell)*nCell); - if( !aCell ){ - rc = SQLITE_NOMEM; - nodeRelease(pRtree, pNode); - pNode = 0; - continue; - } - for(jj=0; jjiDepth-1) ){ - overlap = cellOverlapEnlargement(pRtree,&cell,pCell,aCell,nCell,iCell); - }else{ - overlap = 0.0; - } - if( (iCell==0) - || (overlapnDim; i++){ - RtreeDValue x1 = DCOORD(aCell[0].aCoord[i*2]); - RtreeDValue x2 = DCOORD(aCell[0].aCoord[i*2+1]); - RtreeDValue x3 = x1; - RtreeDValue x4 = x2; - int jj; - - int iCellLeft = 0; - int iCellRight = 0; - - for(jj=1; jjx4 ) x4 = right; - if( left>x3 ){ - x3 = left; - iCellRight = jj; - } - if( rightmaxNormalInnerWidth ){ - iLeftSeed = iCellLeft; - iRightSeed = iCellRight; - } - } - } - - *piLeftSeed = iLeftSeed; - *piRightSeed = iRightSeed; -} -#endif /* VARIANT_GUTTMAN_LINEAR_SPLIT */ - -#if VARIANT_GUTTMAN_QUADRATIC_SPLIT -/* -** Implementation of the quadratic variant of the PickNext() function from -** Guttman[84]. -*/ -static RtreeCell *QuadraticPickNext( - Rtree *pRtree, - RtreeCell *aCell, - int nCell, - RtreeCell *pLeftBox, - RtreeCell *pRightBox, - int *aiUsed -){ - #define FABS(a) ((a)<0.0?-1.0*(a):(a)) - - int iSelect = -1; - RtreeDValue fDiff; - int ii; - for(ii=0; iifDiff ){ - fDiff = diff; - iSelect = ii; - } - } - } - aiUsed[iSelect] = 1; - return &aCell[iSelect]; -} - -/* -** Implementation of the quadratic variant of the PickSeeds() function from -** Guttman[84]. -*/ -static void QuadraticPickSeeds( - Rtree *pRtree, - RtreeCell *aCell, - int nCell, - int *piLeftSeed, - int *piRightSeed -){ - int ii; - int jj; - - int iLeftSeed = 0; - int iRightSeed = 1; - RtreeDValue fWaste = 0.0; - - for(ii=0; iifWaste ){ - iLeftSeed = ii; - iRightSeed = jj; - fWaste = waste; - } - } - } - - *piLeftSeed = iLeftSeed; - *piRightSeed = iRightSeed; -} -#endif /* VARIANT_GUTTMAN_QUADRATIC_SPLIT */ - -/* ** Arguments aIdx, aDistance and aSpare all point to arrays of size ** nIdx. The aIdx array contains the set of integers from 0 to ** (nIdx-1) in no particular order. This function sorts the values @@ -144231,7 +151214,6 @@ } } -#if VARIANT_RSTARTREE_SPLIT /* ** Implementation of the R*-tree variant of SplitNode from Beckman[1990]. */ @@ -144250,7 +151232,7 @@ int iBestDim = 0; int iBestSplit = 0; - RtreeDValue fBestMargin = 0.0; + RtreeDValue fBestMargin = RTREE_ZERO; int nByte = (pRtree->nDim+1)*(sizeof(int*)+nCell*sizeof(int)); @@ -144271,9 +151253,9 @@ } for(ii=0; iinDim; ii++){ - RtreeDValue margin = 0.0; - RtreeDValue fBestOverlap = 0.0; - RtreeDValue fBestArea = 0.0; + RtreeDValue margin = RTREE_ZERO; + RtreeDValue fBestOverlap = RTREE_ZERO; + RtreeDValue fBestArea = RTREE_ZERO; int iBestLeft = 0; int nLeft; @@ -144299,7 +151281,7 @@ } margin += cellMargin(pRtree, &left); margin += cellMargin(pRtree, &right); - overlap = cellOverlap(pRtree, &left, &right, 1, -1); + overlap = cellOverlap(pRtree, &left, &right, 1); area = cellArea(pRtree, &left) + cellArea(pRtree, &right); if( (nLeft==RTREE_MINCELLS(pRtree)) || (overlap0; i--){ - RtreeCell *pNext; - pNext = PickNext(pRtree, aCell, nCell, pBboxLeft, pBboxRight, aiUsed); - RtreeDValue diff = - cellGrowth(pRtree, pBboxLeft, pNext) - - cellGrowth(pRtree, pBboxRight, pNext) - ; - if( (RTREE_MINCELLS(pRtree)-NCELL(pRight)==i) - || (diff>0.0 && (RTREE_MINCELLS(pRtree)-NCELL(pLeft)!=i)) - ){ - nodeInsertCell(pRtree, pRight, pNext); - cellUnion(pRtree, pBboxRight, pNext); - }else{ - nodeInsertCell(pRtree, pLeft, pNext); - cellUnion(pRtree, pBboxLeft, pNext); - } - } - - sqlite3_free(aiUsed); - return SQLITE_OK; -} -#endif - static int updateMapping( Rtree *pRtree, i64 iRowid, @@ -144465,7 +151391,8 @@ memset(pLeft->zData, 0, pRtree->iNodeSize); memset(pRight->zData, 0, pRtree->iNodeSize); - rc = AssignCells(pRtree, aCell, nCell, pLeft, pRight, &leftbbox, &rightbbox); + rc = splitNodeStartree(pRtree, aCell, nCell, pLeft, pRight, + &leftbbox, &rightbbox); if( rc!=SQLITE_OK ){ goto splitnode_out; } @@ -144748,7 +151675,7 @@ } for(ii=0; iinDim; iDim++){ RtreeDValue coord = (DCOORD(aCell[ii].aCoord[iDim*2+1]) - DCOORD(aCell[ii].aCoord[iDim*2])); @@ -144814,16 +151741,12 @@ } } if( nodeInsertCell(pRtree, pNode, pCell) ){ -#if VARIANT_RSTARTREE_REINSERT if( iHeight<=pRtree->iReinsertHeight || pNode->iNode==1){ rc = SplitNode(pRtree, pNode, pCell, iHeight); }else{ pRtree->iReinsertHeight = iHeight; rc = Reinsert(pRtree, pNode, pCell, iHeight); } -#else - rc = SplitNode(pRtree, pNode, pCell, iHeight); -#endif }else{ rc = AdjustTree(pRtree, pNode, pCell); if( rc==SQLITE_OK ){ @@ -144893,7 +151816,7 @@ ** about to be deleted. */ if( rc==SQLITE_OK ){ - rc = findLeafNode(pRtree, iDelete, &pLeaf); + rc = findLeafNode(pRtree, iDelete, &pLeaf, 0); } /* Delete the cell in question from the leaf node. */ @@ -145007,6 +151930,8 @@ rtreeReference(pRtree); assert(nData>=1); + cell.iRowid = 0; /* Used only to suppress a compiler warning */ + /* Constraint handling. A write operation on an r-tree table may return ** SQLITE_CONSTRAINT for two reasons: ** @@ -145138,26 +152063,32 @@ ** on sqlite_stat1 data. Otherwise, use RTREE_DEFAULT_ROWEST. */ static int rtreeQueryStat1(sqlite3 *db, Rtree *pRtree){ - const char *zSql = "SELECT stat FROM sqlite_stat1 WHERE tbl= ? || '_rowid'"; + const char *zFmt = "SELECT stat FROM %Q.sqlite_stat1 WHERE tbl = '%q_rowid'"; + char *zSql; sqlite3_stmt *p; int rc; i64 nRow = 0; - rc = sqlite3_prepare_v2(db, zSql, -1, &p, 0); - if( rc==SQLITE_OK ){ - sqlite3_bind_text(p, 1, pRtree->zName, -1, SQLITE_STATIC); - if( sqlite3_step(p)==SQLITE_ROW ) nRow = sqlite3_column_int64(p, 0); - rc = sqlite3_finalize(p); - }else if( rc!=SQLITE_NOMEM ){ - rc = SQLITE_OK; - } + zSql = sqlite3_mprintf(zFmt, pRtree->zDb, pRtree->zName); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare_v2(db, zSql, -1, &p, 0); + if( rc==SQLITE_OK ){ + if( sqlite3_step(p)==SQLITE_ROW ) nRow = sqlite3_column_int64(p, 0); + rc = sqlite3_finalize(p); + }else if( rc!=SQLITE_NOMEM ){ + rc = SQLITE_OK; + } - if( rc==SQLITE_OK ){ - if( nRow==0 ){ - pRtree->nRowEst = RTREE_DEFAULT_ROWEST; - }else{ - pRtree->nRowEst = MAX(nRow, RTREE_MIN_ROWEST); + if( rc==SQLITE_OK ){ + if( nRow==0 ){ + pRtree->nRowEst = RTREE_DEFAULT_ROWEST; + }else{ + pRtree->nRowEst = MAX(nRow, RTREE_MIN_ROWEST); + } } + sqlite3_free(zSql); } return rc; @@ -145224,7 +152155,8 @@ char *zCreate = sqlite3_mprintf( "CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY, data BLOB);" "CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY, nodeno INTEGER);" -"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY, parentnode INTEGER);" +"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY," + " parentnode INTEGER);" "INSERT INTO '%q'.'%q_node' VALUES(1, zeroblob(%d))", zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, pRtree->iNodeSize ); @@ -145426,6 +152358,8 @@ if( rc==SQLITE_OK ){ *ppVtab = (sqlite3_vtab *)pRtree; }else{ + assert( *ppVtab==0 ); + assert( pRtree->nBusy==1 ); rtreeRelease(pRtree); } return rc; @@ -145436,10 +152370,10 @@ ** Implementation of a scalar function that decodes r-tree nodes to ** human readable strings. This can be used for debugging and analysis. ** -** The scalar function takes two arguments, a blob of data containing -** an r-tree node, and the number of dimensions the r-tree indexes. -** For a two-dimensional r-tree structure called "rt", to deserialize -** all nodes, a statement like: +** The scalar function takes two arguments: (1) the number of dimensions +** to the rtree (between 1 and 5, inclusive) and (2) a blob of data containing +** an r-tree node. For a two-dimensional r-tree structure called "rt", to +** deserialize all nodes, a statement like: ** ** SELECT rtreenode(2, data) FROM rt_node; ** @@ -145472,7 +152406,7 @@ nCell = (int)strlen(zCell); for(jj=0; jjxDestructor ) pInfo->xDestructor(pInfo->pContext); sqlite3_free(p); } /* -** Each call to sqlite3_rtree_geometry_callback() creates an ordinary SQLite -** scalar user function. This C function is the callback used for all such -** registered SQL functions. +** Each call to sqlite3_rtree_geometry_callback() or +** sqlite3_rtree_query_callback() creates an ordinary SQLite +** scalar function that is implemented by this routine. ** -** The scalar user functions return a blob that is interpreted by r-tree -** table MATCH operators. +** All this function does is construct an RtreeMatchArg object that +** contains the geometry-checking callback routines and a list of +** parameters to this function, then return that RtreeMatchArg object +** as a BLOB. +** +** The R-Tree MATCH operator will read the returned BLOB, deserialize +** the RtreeMatchArg object, and use the RtreeMatchArg object to figure +** out which elements of the R-Tree should be returned by the query. */ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){ RtreeGeomCallback *pGeomCtx = (RtreeGeomCallback *)sqlite3_user_data(ctx); @@ -145564,8 +152516,7 @@ }else{ int i; pBlob->magic = RTREE_GEOMETRY_MAGIC; - pBlob->xGeom = pGeomCtx->xGeom; - pBlob->pContext = pGeomCtx->pContext; + pBlob->cb = pGeomCtx[0]; pBlob->nParam = nArg; for(i=0; iaParam[i] = sqlite3_value_double(aArg[i]); #endif } - sqlite3_result_blob(ctx, pBlob, nBlob, doSqlite3Free); + sqlite3_result_blob(ctx, pBlob, nBlob, sqlite3_free); } } /* ** Register a new geometry function for use with the r-tree MATCH operator. */ SQLITE_API int sqlite3_rtree_geometry_callback( - sqlite3 *db, - const char *zGeom, - int (*xGeom)(sqlite3_rtree_geometry *, int, RtreeDValue *, int *), - void *pContext + sqlite3 *db, /* Register SQL function on this connection */ + const char *zGeom, /* Name of the new SQL function */ + int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*), /* Callback */ + void *pContext /* Extra data associated with the callback */ ){ RtreeGeomCallback *pGeomCtx; /* Context object for new user-function */ /* Allocate and populate the context object. */ pGeomCtx = (RtreeGeomCallback *)sqlite3_malloc(sizeof(RtreeGeomCallback)); if( !pGeomCtx ) return SQLITE_NOMEM; pGeomCtx->xGeom = xGeom; + pGeomCtx->xQueryFunc = 0; + pGeomCtx->xDestructor = 0; pGeomCtx->pContext = pContext; - - /* Create the new user-function. Register a destructor function to delete - ** the context object when it is no longer required. */ return sqlite3_create_function_v2(db, zGeom, -1, SQLITE_ANY, - (void *)pGeomCtx, geomCallback, 0, 0, doSqlite3Free + (void *)pGeomCtx, geomCallback, 0, 0, rtreeFreeCallback ); } +/* +** Register a new 2nd-generation geometry function for use with the +** r-tree MATCH operator. +*/ +SQLITE_API int sqlite3_rtree_query_callback( + sqlite3 *db, /* Register SQL function on this connection */ + const char *zQueryFunc, /* Name of new SQL function */ + int (*xQueryFunc)(sqlite3_rtree_query_info*), /* Callback */ + void *pContext, /* Extra data passed into the callback */ + void (*xDestructor)(void*) /* Destructor for the extra data */ +){ + RtreeGeomCallback *pGeomCtx; /* Context object for new user-function */ + + /* Allocate and populate the context object. */ + pGeomCtx = (RtreeGeomCallback *)sqlite3_malloc(sizeof(RtreeGeomCallback)); + if( !pGeomCtx ) return SQLITE_NOMEM; + pGeomCtx->xGeom = 0; + pGeomCtx->xQueryFunc = xQueryFunc; + pGeomCtx->xDestructor = xDestructor; + pGeomCtx->pContext = pContext; + return sqlite3_create_function_v2(db, zQueryFunc, -1, SQLITE_ANY, + (void *)pGeomCtx, geomCallback, 0, 0, rtreeFreeCallback + ); +} + #if !SQLITE_CORE #ifdef _WIN32 __declspec(dllexport)